2 * OMAP3-specific clock framework functions
4 * Copyright (C) 2007-2008 Texas Instruments, Inc.
5 * Copyright (C) 2007-2010 Nokia Corporation
10 * Parts of this code are based on code written by
11 * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License version 2 as
15 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/errno.h>
21 #include <linux/clk.h>
24 #include <plat/hardware.h>
25 #include <plat/clock.h>
28 #include "clock3xxx.h"
29 #include "prm2xxx_3xxx.h"
30 #include "prm-regbits-34xx.h"
31 #include "cm2xxx_3xxx.h"
32 #include "cm-regbits-34xx.h"
35 * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
36 * that are sourced by DPLL5, and both of these require this clock
37 * to be at 120 MHz for proper operation.
39 #define DPLL5_FREQ_FOR_USBHOST 120000000
41 /* needed by omap3_core_dpll_m2_set_rate() */
42 struct clk *sdrc_ick_p, *arm_fck_p;
44 int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
47 * According to the 12-5 CDP code from TI, "Limitation 2.5"
48 * on 3430ES1 prevents us from changing DPLL multipliers or dividers
51 if (omap_rev() == OMAP3430_REV_ES1_0) {
52 pr_err("clock: DPLL4 cannot change rate due to "
53 "silicon 'Limitation 2.5' on 3430ES1.\n");
57 return omap3_noncore_dpll_set_rate(clk, rate);
60 void __init omap3_clk_lock_dpll5(void)
62 struct clk *dpll5_clk;
63 struct clk *dpll5_m2_clk;
65 dpll5_clk = clk_get(NULL, "dpll5_ck");
66 clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
67 clk_enable(dpll5_clk);
69 /* Program dpll5_m2_clk divider for no division */
70 dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
71 clk_enable(dpll5_m2_clk);
72 clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
74 clk_disable(dpll5_m2_clk);
75 clk_disable(dpll5_clk);
79 /* Common clock code */
82 * Switch the MPU rate if specified on cmdline. We cannot do this
83 * early until cmdline is parsed. XXX This should be removed from the
84 * clock code and handled by the OPP layer code in the near future.
86 static int __init omap3xxx_clk_arch_init(void)
90 if (!cpu_is_omap34xx())
93 ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
95 omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
100 arch_initcall(omap3xxx_clk_arch_init);