]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/arm/mach-omap2/pdata-quirks.c
hwmon: Add LTC2990 sensor driver
[karo-tx-linux.git] / arch / arm / mach-omap2 / pdata-quirks.c
1 /*
2  * Legacy platform_data quirks
3  *
4  * Copyright (C) 2013 Texas Instruments
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 #include <linux/clk.h>
11 #include <linux/davinci_emac.h>
12 #include <linux/gpio.h>
13 #include <linux/init.h>
14 #include <linux/kernel.h>
15 #include <linux/of_platform.h>
16 #include <linux/ti_wilink_st.h>
17 #include <linux/wl12xx.h>
18 #include <linux/mmc/card.h>
19 #include <linux/mmc/host.h>
20 #include <linux/regulator/machine.h>
21 #include <linux/regulator/fixed.h>
22
23 #include <linux/platform_data/pinctrl-single.h>
24 #include <linux/platform_data/iommu-omap.h>
25 #include <linux/platform_data/wkup_m3.h>
26
27 #include "common.h"
28 #include "common-board-devices.h"
29 #include "dss-common.h"
30 #include "control.h"
31 #include "omap_device.h"
32 #include "omap-secure.h"
33 #include "soc.h"
34 #include "hsmmc.h"
35
36 struct pdata_init {
37         const char *compatible;
38         void (*fn)(void);
39 };
40
41 static struct of_dev_auxdata omap_auxdata_lookup[];
42 static struct twl4030_gpio_platform_data twl_gpio_auxdata;
43
44 #ifdef CONFIG_MACH_NOKIA_N8X0
45 static void __init omap2420_n8x0_legacy_init(void)
46 {
47         omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
48 }
49 #else
50 #define omap2420_n8x0_legacy_init       NULL
51 #endif
52
53 #ifdef CONFIG_ARCH_OMAP3
54 /*
55  * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
56  * mode for MMC1 in case bootloader did not configure things.
57  * Note that if the pins are used for MMC1, pbias-regulator
58  * manages the IO voltage.
59  */
60 static void __init omap3_gpio126_127_129(void)
61 {
62         u32 reg;
63
64         reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
65         reg &= ~OMAP343X_PBIASLITEVMODE1;
66         reg |= OMAP343X_PBIASLITEPWRDNZ1;
67         omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
68         if (cpu_is_omap3630()) {
69                 reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
70                 reg |= OMAP36XX_GPIO_IO_PWRDNZ;
71                 omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
72         }
73 }
74
75 static void __init hsmmc2_internal_input_clk(void)
76 {
77         u32 reg;
78
79         reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
80         reg |= OMAP2_MMCSDIO2ADPCLKISEL;
81         omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
82 }
83
84 static struct iommu_platform_data omap3_iommu_pdata = {
85         .reset_name = "mmu",
86         .assert_reset = omap_device_assert_hardreset,
87         .deassert_reset = omap_device_deassert_hardreset,
88 };
89
90 static int omap3_sbc_t3730_twl_callback(struct device *dev,
91                                            unsigned gpio,
92                                            unsigned ngpio)
93 {
94         int res;
95
96         res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
97                                "wlan pwr");
98         if (res)
99                 return res;
100
101         gpio_export(gpio, 0);
102
103         return 0;
104 }
105
106 static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
107 {
108         int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
109
110         if (err) {
111                 pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
112                         hub_name, err);
113                 return;
114         }
115
116         gpio_export(gpio, 0);
117
118         udelay(10);
119         gpio_set_value(gpio, 1);
120         msleep(1);
121 }
122
123 static void __init omap3_sbc_t3730_twl_init(void)
124 {
125         twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
126 }
127
128 static void __init omap3_sbc_t3730_legacy_init(void)
129 {
130         omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
131 }
132
133 static void __init omap3_sbc_t3530_legacy_init(void)
134 {
135         omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
136 }
137
138 static struct ti_st_plat_data wilink_pdata = {
139         .nshutdown_gpio = 137,
140         .dev_name = "/dev/ttyO1",
141         .flow_cntrl = 1,
142         .baud_rate = 300000,
143 };
144
145 static struct platform_device wl18xx_device = {
146         .name   = "kim",
147         .id     = -1,
148         .dev    = {
149                 .platform_data = &wilink_pdata,
150         }
151 };
152
153 static struct ti_st_plat_data wilink7_pdata = {
154         .nshutdown_gpio = 162,
155         .dev_name = "/dev/ttyO1",
156         .flow_cntrl = 1,
157         .baud_rate = 300000,
158 };
159
160 static struct platform_device wl128x_device = {
161         .name   = "kim",
162         .id     = -1,
163         .dev    = {
164                 .platform_data = &wilink7_pdata,
165         }
166 };
167
168 static struct platform_device btwilink_device = {
169         .name   = "btwilink",
170         .id     = -1,
171 };
172
173 static void __init omap3_igep0020_rev_f_legacy_init(void)
174 {
175         platform_device_register(&wl18xx_device);
176         platform_device_register(&btwilink_device);
177 }
178
179 static void __init omap3_igep0030_rev_g_legacy_init(void)
180 {
181         platform_device_register(&wl18xx_device);
182         platform_device_register(&btwilink_device);
183 }
184
185 static void __init omap3_evm_legacy_init(void)
186 {
187         hsmmc2_internal_input_clk();
188 }
189
190 static void am35xx_enable_emac_int(void)
191 {
192         u32 v;
193
194         v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
195         v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
196               AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
197         omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
198         omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
199 }
200
201 static void am35xx_disable_emac_int(void)
202 {
203         u32 v;
204
205         v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
206         v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
207         omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
208         omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
209 }
210
211 static struct emac_platform_data am35xx_emac_pdata = {
212         .interrupt_enable       = am35xx_enable_emac_int,
213         .interrupt_disable      = am35xx_disable_emac_int,
214 };
215
216 static void __init am35xx_emac_reset(void)
217 {
218         u32 v;
219
220         v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
221         v &= ~AM35XX_CPGMACSS_SW_RST;
222         omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
223         omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
224 }
225
226 static struct gpio cm_t3517_wlan_gpios[] __initdata = {
227         { 56,   GPIOF_OUT_INIT_HIGH,    "wlan pwr" },
228         { 4,    GPIOF_OUT_INIT_HIGH,    "xcvr noe" },
229 };
230
231 static void __init omap3_sbc_t3517_wifi_init(void)
232 {
233         int err = gpio_request_array(cm_t3517_wlan_gpios,
234                                 ARRAY_SIZE(cm_t3517_wlan_gpios));
235         if (err) {
236                 pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
237                 return;
238         }
239
240         gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
241         gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
242
243         msleep(100);
244         gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
245 }
246
247 static void __init omap3_sbc_t3517_legacy_init(void)
248 {
249         omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
250         omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
251         am35xx_emac_reset();
252         hsmmc2_internal_input_clk();
253         omap3_sbc_t3517_wifi_init();
254 }
255
256 static void __init am3517_evm_legacy_init(void)
257 {
258         am35xx_emac_reset();
259 }
260
261 static struct platform_device omap3_rom_rng_device = {
262         .name           = "omap3-rom-rng",
263         .id             = -1,
264         .dev    = {
265                 .platform_data  = rx51_secure_rng_call,
266         },
267 };
268
269 static void __init nokia_n900_legacy_init(void)
270 {
271         hsmmc2_internal_input_clk();
272
273         if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
274                 if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
275                         pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
276                         /* set IBE to 1 */
277                         rx51_secure_update_aux_cr(BIT(6), 0);
278                 } else {
279                         pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
280                         pr_warn("Thumb binaries may crash randomly without this workaround\n");
281                 }
282
283                 pr_info("RX-51: Registering OMAP3 HWRNG device\n");
284                 platform_device_register(&omap3_rom_rng_device);
285
286         }
287 }
288
289 static void __init omap3_tao3530_legacy_init(void)
290 {
291         hsmmc2_internal_input_clk();
292 }
293
294 static void __init omap3_logicpd_torpedo_init(void)
295 {
296         omap3_gpio126_127_129();
297         platform_device_register(&wl128x_device);
298         platform_device_register(&btwilink_device);
299 }
300
301 /* omap3pandora legacy devices */
302 #define PANDORA_WIFI_IRQ_GPIO           21
303 #define PANDORA_WIFI_NRESET_GPIO        23
304
305 static struct platform_device pandora_backlight = {
306         .name   = "pandora-backlight",
307         .id     = -1,
308 };
309
310 static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
311         REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
312 };
313
314 static struct regulator_init_data pandora_vmmc3 = {
315         .constraints = {
316                 .valid_ops_mask         = REGULATOR_CHANGE_STATUS,
317         },
318         .num_consumer_supplies  = ARRAY_SIZE(pandora_vmmc3_supply),
319         .consumer_supplies      = pandora_vmmc3_supply,
320 };
321
322 static struct fixed_voltage_config pandora_vwlan = {
323         .supply_name            = "vwlan",
324         .microvolts             = 1800000, /* 1.8V */
325         .gpio                   = PANDORA_WIFI_NRESET_GPIO,
326         .startup_delay          = 50000, /* 50ms */
327         .enable_high            = 1,
328         .init_data              = &pandora_vmmc3,
329 };
330
331 static struct platform_device pandora_vwlan_device = {
332         .name           = "reg-fixed-voltage",
333         .id             = 1,
334         .dev = {
335                 .platform_data = &pandora_vwlan,
336         },
337 };
338
339 static void pandora_wl1251_init_card(struct mmc_card *card)
340 {
341         /*
342          * We have TI wl1251 attached to MMC3. Pass this information to
343          * SDIO core because it can't be probed by normal methods.
344          */
345         if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
346                 card->quirks |= MMC_QUIRK_NONSTD_SDIO;
347                 card->cccr.wide_bus = 1;
348                 card->cis.vendor = 0x104c;
349                 card->cis.device = 0x9066;
350                 card->cis.blksize = 512;
351                 card->cis.max_dtr = 24000000;
352                 card->ocr = 0x80;
353         }
354 }
355
356 static struct omap2_hsmmc_info pandora_mmc3[] = {
357         {
358                 .mmc            = 3,
359                 .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
360                 .gpio_cd        = -EINVAL,
361                 .gpio_wp        = -EINVAL,
362                 .init_card      = pandora_wl1251_init_card,
363         },
364         {}      /* Terminator */
365 };
366
367 static void __init pandora_wl1251_init(void)
368 {
369         struct wl1251_platform_data pandora_wl1251_pdata;
370         int ret;
371
372         memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
373
374         pandora_wl1251_pdata.power_gpio = -1;
375
376         ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
377         if (ret < 0)
378                 goto fail;
379
380         pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
381         if (pandora_wl1251_pdata.irq < 0)
382                 goto fail_irq;
383
384         pandora_wl1251_pdata.use_eeprom = true;
385         ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
386         if (ret < 0)
387                 goto fail_irq;
388
389         return;
390
391 fail_irq:
392         gpio_free(PANDORA_WIFI_IRQ_GPIO);
393 fail:
394         pr_err("wl1251 board initialisation failed\n");
395 }
396
397 static void __init omap3_pandora_legacy_init(void)
398 {
399         platform_device_register(&pandora_backlight);
400         platform_device_register(&pandora_vwlan_device);
401         omap_hsmmc_init(pandora_mmc3);
402         omap_hsmmc_late_init(pandora_mmc3);
403         pandora_wl1251_init();
404 }
405 #endif /* CONFIG_ARCH_OMAP3 */
406
407 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
408 static struct iommu_platform_data omap4_iommu_pdata = {
409         .reset_name = "mmu_cache",
410         .assert_reset = omap_device_assert_hardreset,
411         .deassert_reset = omap_device_deassert_hardreset,
412 };
413 #endif
414
415 #if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
416 static struct wkup_m3_platform_data wkup_m3_data = {
417         .reset_name = "wkup_m3",
418         .assert_reset = omap_device_assert_hardreset,
419         .deassert_reset = omap_device_deassert_hardreset,
420 };
421 #endif
422
423 #ifdef CONFIG_SOC_OMAP5
424 static void __init omap5_uevm_legacy_init(void)
425 {
426 }
427 #endif
428
429 static struct pcs_pdata pcs_pdata;
430
431 void omap_pcs_legacy_init(int irq, void (*rearm)(void))
432 {
433         pcs_pdata.irq = irq;
434         pcs_pdata.rearm = rearm;
435 }
436
437 /*
438  * GPIOs for TWL are initialized by the I2C bus and need custom
439  * handing until DSS has device tree bindings.
440  */
441 void omap_auxdata_legacy_init(struct device *dev)
442 {
443         if (dev->platform_data)
444                 return;
445
446         if (strcmp("twl4030-gpio", dev_name(dev)))
447                 return;
448
449         dev->platform_data = &twl_gpio_auxdata;
450 }
451
452 /*
453  * Few boards still need auxdata populated before we populate
454  * the dev entries in of_platform_populate().
455  */
456 static struct pdata_init auxdata_quirks[] __initdata = {
457 #ifdef CONFIG_SOC_OMAP2420
458         { "nokia,n800", omap2420_n8x0_legacy_init, },
459         { "nokia,n810", omap2420_n8x0_legacy_init, },
460         { "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
461 #endif
462 #ifdef CONFIG_ARCH_OMAP3
463         { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
464 #endif
465         { /* sentinel */ },
466 };
467
468 static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
469 #ifdef CONFIG_MACH_NOKIA_N8X0
470         OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
471         OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
472         OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
473 #endif
474 #ifdef CONFIG_ARCH_OMAP3
475         OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
476         OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
477         OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
478         OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
479                        &omap3_iommu_pdata),
480         /* Only on am3517 */
481         OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
482         OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
483                        &am35xx_emac_pdata),
484 #endif
485 #ifdef CONFIG_SOC_AM33XX
486         OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
487                        &wkup_m3_data),
488 #endif
489 #ifdef CONFIG_ARCH_OMAP4
490         OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
491         OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
492 #endif
493 #ifdef CONFIG_SOC_OMAP5
494         OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
495         OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
496 #endif
497 #ifdef CONFIG_SOC_DRA7XX
498         OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
499 #endif
500 #ifdef CONFIG_SOC_AM43XX
501         OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
502         OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
503                        &wkup_m3_data),
504 #endif
505 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
506         OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
507                        &omap4_iommu_pdata),
508         OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
509                        &omap4_iommu_pdata),
510 #endif
511         { /* sentinel */ },
512 };
513
514 /*
515  * Few boards still need to initialize some legacy devices with
516  * platform data until the drivers support device tree.
517  */
518 static struct pdata_init pdata_quirks[] __initdata = {
519 #ifdef CONFIG_ARCH_OMAP3
520         { "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
521         { "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
522         { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
523         { "nokia,omap3-n900", nokia_n900_legacy_init, },
524         { "nokia,omap3-n9", hsmmc2_internal_input_clk, },
525         { "nokia,omap3-n950", hsmmc2_internal_input_clk, },
526         { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
527         { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
528         { "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
529         { "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
530         { "ti,am3517-evm", am3517_evm_legacy_init, },
531         { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
532         { "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
533         { "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
534 #endif
535 #ifdef CONFIG_SOC_OMAP5
536         { "ti,omap5-uevm", omap5_uevm_legacy_init, },
537 #endif
538         { /* sentinel */ },
539 };
540
541 static void pdata_quirks_check(struct pdata_init *quirks)
542 {
543         while (quirks->compatible) {
544                 if (of_machine_is_compatible(quirks->compatible)) {
545                         if (quirks->fn)
546                                 quirks->fn();
547                         break;
548                 }
549                 quirks++;
550         }
551 }
552
553 void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
554 {
555         /*
556          * We still need this for omap2420 and omap3 PM to work, others are
557          * using drivers/misc/sram.c already.
558          */
559         if (of_machine_is_compatible("ti,omap2420") ||
560             of_machine_is_compatible("ti,omap3"))
561                 omap_sdrc_init(NULL, NULL);
562
563         pdata_quirks_check(auxdata_quirks);
564         of_platform_populate(NULL, omap_dt_match_table,
565                              omap_auxdata_lookup, NULL);
566         pdata_quirks_check(pdata_quirks);
567 }