2 * linux/arch/arm/mach-pxa/cm-x300.c
4 * Support for the CompuLab CM-X300 modules
6 * Copyright (C) 2008 CompuLab Ltd.
8 * Mike Rapoport <mike@compulab.co.il>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/interrupt.h>
18 #include <linux/init.h>
19 #include <linux/platform_device.h>
21 #include <linux/gpio.h>
22 #include <linux/dm9000.h>
23 #include <linux/leds.h>
24 #include <linux/rtc-v3020.h>
26 #include <linux/i2c.h>
27 #include <linux/i2c/pca953x.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
32 #include <mach/pxa300.h>
33 #include <mach/pxafb.h>
35 #include <mach/ohci.h>
37 #include <mach/pxa3xx_nand.h>
39 #include <asm/mach/map.h>
43 #define CM_X300_ETH_PHYS 0x08000010
45 #define GPIO82_MMC2_IRQ (82)
46 #define GPIO85_MMC2_WP (85)
48 #define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
50 #define GPIO95_RTC_CS (95)
51 #define GPIO96_RTC_WR (96)
52 #define GPIO97_RTC_RD (97)
53 #define GPIO98_RTC_IO (98)
55 static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
80 GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
82 GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
86 GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
92 GPIO25_AC97_SDATA_IN_0,
93 GPIO27_AC97_SDATA_OUT,
97 GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
98 GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
99 GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
100 GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
101 GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
102 GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
103 GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
104 GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
114 GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
118 GPIO8_MMC1_CMD, /* CMD0 for slot 0 */
122 GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
129 GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
134 GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
139 GPIO79_GPIO, /* LED */
140 GPIO82_GPIO | MFP_PULL_HIGH, /* MMC CD */
141 GPIO85_GPIO, /* MMC WP */
142 GPIO99_GPIO, /* Ethernet IRQ */
145 GPIO95_GPIO, /* RTC CS */
146 GPIO96_GPIO, /* RTC WR */
147 GPIO97_GPIO, /* RTC RD */
148 GPIO98_GPIO, /* RTC IO */
155 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
156 static struct resource dm9000_resources[] = {
158 .start = CM_X300_ETH_PHYS,
159 .end = CM_X300_ETH_PHYS + 0x3,
160 .flags = IORESOURCE_MEM,
163 .start = CM_X300_ETH_PHYS + 0x4,
164 .end = CM_X300_ETH_PHYS + 0x4 + 500,
165 .flags = IORESOURCE_MEM,
168 .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
169 .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
170 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
174 static struct dm9000_plat_data cm_x300_dm9000_platdata = {
175 .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
178 static struct platform_device dm9000_device = {
181 .num_resources = ARRAY_SIZE(dm9000_resources),
182 .resource = dm9000_resources,
184 .platform_data = &cm_x300_dm9000_platdata,
189 static void __init cm_x300_init_dm9000(void)
191 platform_device_register(&dm9000_device);
194 static inline void cm_x300_init_dm9000(void) {}
197 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
198 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
227 static struct pxafb_mach_info cm_x300_lcd = {
228 .modes = cm_x300_lcd_modes,
230 .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
233 static void __init cm_x300_init_lcd(void)
235 set_pxa_fb_info(&cm_x300_lcd);
238 static inline void cm_x300_init_lcd(void) {}
241 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
242 static struct mtd_partition cm_x300_nand_partitions[] = {
247 .mask_flags = MTD_WRITEABLE, /* force read-only */
251 .offset = MTDPART_OFS_APPEND,
253 .mask_flags = MTD_WRITEABLE, /* force read-only */
256 .name = "Environment",
257 .offset = MTDPART_OFS_APPEND,
262 .offset = MTDPART_OFS_APPEND,
263 .size = SZ_256K + SZ_1M,
264 .mask_flags = MTD_WRITEABLE, /* force read-only */
268 .offset = MTDPART_OFS_APPEND,
273 .offset = MTDPART_OFS_APPEND,
274 .size = MTDPART_SIZ_FULL,
278 static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
281 .parts = cm_x300_nand_partitions,
282 .nr_parts = ARRAY_SIZE(cm_x300_nand_partitions),
285 static void __init cm_x300_init_nand(void)
287 pxa3xx_set_nand_info(&cm_x300_nand_info);
290 static inline void cm_x300_init_nand(void) {}
293 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
294 /* The first MMC slot of CM-X300 is hardwired to Libertas card and has
295 no detection/ro pins */
296 static int cm_x300_mci_init(struct device *dev,
297 irq_handler_t cm_x300_detect_int,
303 static void cm_x300_mci_exit(struct device *dev, void *data)
307 static struct pxamci_platform_data cm_x300_mci_platform_data = {
309 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
310 .init = cm_x300_mci_init,
311 .exit = cm_x300_mci_exit,
314 static int cm_x300_mci2_ro(struct device *dev)
316 return gpio_get_value(GPIO85_MMC2_WP);
319 static int cm_x300_mci2_init(struct device *dev,
320 irq_handler_t cm_x300_detect_int,
326 * setup GPIO for CM-X300 MMC controller
328 err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
331 gpio_direction_input(GPIO82_MMC2_IRQ);
333 err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
336 gpio_direction_input(GPIO85_MMC2_WP);
338 err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
339 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
340 "MMC card detect", data);
342 printk(KERN_ERR "%s: MMC/SD/SDIO: "
343 "can't request card detect IRQ\n", __func__);
344 goto err_request_irq;
350 gpio_free(GPIO85_MMC2_WP);
352 gpio_free(GPIO82_MMC2_IRQ);
357 static void cm_x300_mci2_exit(struct device *dev, void *data)
359 free_irq(CM_X300_MMC2_IRQ, data);
360 gpio_free(GPIO82_MMC2_IRQ);
361 gpio_free(GPIO85_MMC2_WP);
364 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
366 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
367 .init = cm_x300_mci2_init,
368 .exit = cm_x300_mci2_exit,
369 .get_ro = cm_x300_mci2_ro,
372 static void __init cm_x300_init_mmc(void)
374 pxa_set_mci_info(&cm_x300_mci_platform_data);
375 pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
378 static inline void cm_x300_init_mmc(void) {}
381 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
382 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
383 .port_mode = PMM_PERPORT_MODE,
384 .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
387 static void __init cm_x300_init_ohci(void)
389 pxa_set_ohci_info(&cm_x300_ohci_platform_data);
392 static inline void cm_x300_init_ohci(void) {}
395 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
396 static struct gpio_led cm_x300_leds[] = {
398 .name = "cm-x300:green",
399 .default_trigger = "heartbeat",
405 static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
406 .num_leds = ARRAY_SIZE(cm_x300_leds),
407 .leds = cm_x300_leds,
410 static struct platform_device cm_x300_led_device = {
414 .platform_data = &cm_x300_gpio_led_pdata,
418 static void __init cm_x300_init_leds(void)
420 platform_device_register(&cm_x300_led_device);
423 static inline void cm_x300_init_leds(void) {}
426 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
428 static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
432 static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
436 static struct i2c_board_info cm_x300_gpio_ext_info[] = {
438 I2C_BOARD_INFO("pca9555", 0x24),
439 .platform_data = &cm_x300_gpio_ext_pdata_0,
442 I2C_BOARD_INFO("pca9555", 0x25),
443 .platform_data = &cm_x300_gpio_ext_pdata_1,
447 static void __init cm_x300_init_i2c(void)
449 pxa_set_i2c_info(NULL);
450 i2c_register_board_info(0, cm_x300_gpio_ext_info,
451 ARRAY_SIZE(cm_x300_gpio_ext_info));
454 static inline void cm_x300_init_i2c(void) {}
457 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
458 struct v3020_platform_data cm_x300_v3020_pdata = {
460 .gpio_cs = GPIO95_RTC_CS,
461 .gpio_wr = GPIO96_RTC_WR,
462 .gpio_rd = GPIO97_RTC_RD,
463 .gpio_io = GPIO98_RTC_IO,
466 static struct platform_device cm_x300_rtc_device = {
470 .platform_data = &cm_x300_v3020_pdata,
474 static void __init cm_x300_init_rtc(void)
476 platform_device_register(&cm_x300_rtc_device);
479 static inline void cm_x300_init_rtc(void) {}
482 static void __init cm_x300_init(void)
484 /* board-processor specific GPIO initialization */
485 pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
487 cm_x300_init_dm9000();
497 MACHINE_START(CM_X300, "CM-X300 module")
498 .phys_io = 0x40000000,
499 .boot_params = 0xa0000100,
500 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
501 .map_io = pxa_map_io,
502 .init_irq = pxa3xx_init_irq,
504 .init_machine = cm_x300_init,