2 * Support for Sharp SL-C7xx PDAs
3 * Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
5 * Copyright (c) 2004-2005 Richard Purdie
7 * Based on Sharp's 2.4 kernel patches/lubbock.c
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
20 #include <linux/interrupt.h>
21 #include <linux/mmc/host.h>
22 #include <linux/mtd/physmap.h>
24 #include <linux/gpio.h>
25 #include <linux/backlight.h>
26 #include <linux/i2c.h>
28 #include <linux/spi/spi.h>
29 #include <linux/spi/ads7846.h>
30 #include <linux/spi/corgi_lcd.h>
31 #include <linux/mtd/sharpsl.h>
32 #include <linux/input/matrix_keypad.h>
33 #include <video/w100fb.h>
35 #include <asm/setup.h>
36 #include <asm/memory.h>
37 #include <asm/mach-types.h>
38 #include <mach/hardware.h>
40 #include <asm/system.h>
42 #include <asm/mach/arch.h>
43 #include <asm/mach/map.h>
44 #include <asm/mach/irq.h>
46 #include <mach/pxa25x.h>
48 #include <mach/irda.h>
51 #include <mach/pxa2xx_spi.h>
52 #include <mach/corgi.h>
53 #include <mach/sharpsl.h>
55 #include <asm/mach/sharpsl_param.h>
56 #include <asm/hardware/scoop.h>
62 static unsigned long corgi_pin_config[] __initdata = {
63 /* Static Memory I/O */
64 GPIO78_nCS_2, /* w100fb */
65 GPIO80_nCS_4, /* scoop */
71 GPIO24_GPIO, /* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
74 GPIO28_I2S_BITCLK_OUT,
108 /* GPIO Matrix Keypad */
109 GPIO66_GPIO | MFP_LPM_DRIVE_HIGH, /* column 0 */
110 GPIO67_GPIO | MFP_LPM_DRIVE_HIGH, /* column 1 */
111 GPIO68_GPIO | MFP_LPM_DRIVE_HIGH, /* column 2 */
112 GPIO69_GPIO | MFP_LPM_DRIVE_HIGH, /* column 3 */
113 GPIO70_GPIO | MFP_LPM_DRIVE_HIGH, /* column 4 */
114 GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* column 5 */
115 GPIO72_GPIO | MFP_LPM_DRIVE_HIGH, /* column 6 */
116 GPIO73_GPIO | MFP_LPM_DRIVE_HIGH, /* column 7 */
117 GPIO74_GPIO | MFP_LPM_DRIVE_HIGH, /* column 8 */
118 GPIO75_GPIO | MFP_LPM_DRIVE_HIGH, /* column 9 */
119 GPIO76_GPIO | MFP_LPM_DRIVE_HIGH, /* column 10 */
120 GPIO77_GPIO | MFP_LPM_DRIVE_HIGH, /* column 11 */
121 GPIO58_GPIO, /* row 0 */
122 GPIO59_GPIO, /* row 1 */
123 GPIO60_GPIO, /* row 2 */
124 GPIO61_GPIO, /* row 3 */
125 GPIO62_GPIO, /* row 4 */
126 GPIO63_GPIO, /* row 5 */
127 GPIO64_GPIO, /* row 6 */
128 GPIO65_GPIO, /* row 7 */
131 GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
132 GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
133 GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_MAIN_BAT_{LOW,COVER} */
134 GPIO13_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_LED_ORANGE */
135 GPIO21_GPIO, /* CORGI_GPIO_ADC_TEMP */
136 GPIO22_GPIO, /* CORGI_GPIO_IR_ON */
137 GPIO33_GPIO, /* CORGI_GPIO_SD_PWR */
138 GPIO38_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_ON */
139 GPIO43_GPIO | MFP_LPM_KEEP_OUTPUT, /* CORGI_GPIO_CHRG_UKN */
140 GPIO44_GPIO, /* CORGI_GPIO_HSYNC */
142 GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_KEY_INT */
143 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* CORGI_GPIO_AC_IN */
144 GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* CORGI_GPIO_WAKEUP */
150 static struct resource corgi_scoop_resources[] = {
154 .flags = IORESOURCE_MEM,
158 static struct scoop_config corgi_scoop_setup = {
159 .io_dir = CORGI_SCOOP_IO_DIR,
160 .io_out = CORGI_SCOOP_IO_OUT,
161 .gpio_base = CORGI_SCOOP_GPIO_BASE,
164 struct platform_device corgiscoop_device = {
165 .name = "sharp-scoop",
168 .platform_data = &corgi_scoop_setup,
170 .num_resources = ARRAY_SIZE(corgi_scoop_resources),
171 .resource = corgi_scoop_resources,
174 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
176 .dev = &corgiscoop_device.dev,
177 .irq = CORGI_IRQ_GPIO_CF_IRQ,
178 .cd_irq = CORGI_IRQ_GPIO_CF_CD,
179 .cd_irq_str = "PCMCIA0 CD",
183 static struct scoop_pcmcia_config corgi_pcmcia_config = {
184 .devs = &corgi_pcmcia_scoop[0],
188 EXPORT_SYMBOL(corgiscoop_device);
190 static struct w100_mem_info corgi_fb_mem = {
191 .ext_cntl = 0x00040003,
192 .sdram_mode_reg = 0x00650021,
193 .ext_timing_cntl = 0x10002a4a,
194 .io_cntl = 0x7ff87012,
198 static struct w100_gen_regs corgi_fb_regs = {
199 .lcd_format = 0x00000003,
200 .lcdd_cntl1 = 0x01CC0000,
201 .lcdd_cntl2 = 0x0003FFFF,
202 .genlcd_cntl1 = 0x00FFFF0D,
203 .genlcd_cntl2 = 0x003F3003,
204 .genlcd_cntl3 = 0x000102aa,
207 static struct w100_gpio_regs corgi_fb_gpio = {
208 .init_data1 = 0x000000bf,
209 .init_data2 = 0x00000000,
210 .gpio_dir1 = 0x00000000,
211 .gpio_oe1 = 0x03c0feff,
212 .gpio_dir2 = 0x00000000,
213 .gpio_oe2 = 0x00000000,
216 static struct w100_mode corgi_fb_modes[] = {
221 .right_margin = 0x55,
222 .upper_margin = 0x03,
223 .lower_margin = 0x00,
224 .crtc_ss = 0x82360056,
225 .crtc_ls = 0xA0280000,
226 .crtc_gs = 0x80280028,
227 .crtc_vpos_gs = 0x02830002,
228 .crtc_rev = 0x00400008,
229 .crtc_dclk = 0xA0000000,
230 .crtc_gclk = 0x8015010F,
231 .crtc_goe = 0x80100110,
232 .crtc_ps1_active = 0x41060010,
234 .fast_pll_freq = 100,
235 .sysclk_src = CLK_SRC_PLL,
237 .pixclk_src = CLK_SRC_PLL,
239 .pixclk_divider_rotated = 6,
244 .right_margin = 0x2e,
245 .upper_margin = 0x01,
246 .lower_margin = 0x00,
247 .crtc_ss = 0x81170027,
248 .crtc_ls = 0xA0140000,
249 .crtc_gs = 0xC0140014,
250 .crtc_vpos_gs = 0x00010141,
251 .crtc_rev = 0x00400008,
252 .crtc_dclk = 0xA0000000,
253 .crtc_gclk = 0x8015010F,
254 .crtc_goe = 0x80100110,
255 .crtc_ps1_active = 0x41060010,
258 .sysclk_src = CLK_SRC_XTAL,
260 .pixclk_src = CLK_SRC_XTAL,
262 .pixclk_divider_rotated = 1,
267 static struct w100fb_mach_info corgi_fb_info = {
268 .init_mode = INIT_MODE_ROTATED,
269 .mem = &corgi_fb_mem,
270 .regs = &corgi_fb_regs,
271 .modelist = &corgi_fb_modes[0],
273 .gpio = &corgi_fb_gpio,
274 .xtal_freq = 12500000,
278 static struct resource corgi_fb_resources[] = {
282 .flags = IORESOURCE_MEM,
286 static struct platform_device corgifb_device = {
289 .num_resources = ARRAY_SIZE(corgi_fb_resources),
290 .resource = corgi_fb_resources,
292 .platform_data = &corgi_fb_info,
298 * Corgi Keyboard Device
300 #define CORGI_KEY_CALENDER KEY_F1
301 #define CORGI_KEY_ADDRESS KEY_F2
302 #define CORGI_KEY_FN KEY_F3
303 #define CORGI_KEY_CANCEL KEY_F4
304 #define CORGI_KEY_OFF KEY_SUSPEND
305 #define CORGI_KEY_EXOK KEY_F5
306 #define CORGI_KEY_EXCANCEL KEY_F6
307 #define CORGI_KEY_EXJOGDOWN KEY_F7
308 #define CORGI_KEY_EXJOGUP KEY_F8
309 #define CORGI_KEY_JAP1 KEY_LEFTCTRL
310 #define CORGI_KEY_JAP2 KEY_LEFTALT
311 #define CORGI_KEY_MAIL KEY_F10
312 #define CORGI_KEY_OK KEY_F11
313 #define CORGI_KEY_MENU KEY_F12
315 static const uint32_t corgikbd_keymap[] = {
323 KEY(0, 8, KEY_BACKSPACE),
340 KEY(3, 0, CORGI_KEY_CALENDER),
348 KEY(3, 9, KEY_RIGHTSHIFT),
349 KEY(4, 0, CORGI_KEY_ADDRESS),
356 KEY(4, 8, KEY_ENTER),
357 KEY(4, 10, KEY_LEFTSHIFT),
358 KEY(5, 0, CORGI_KEY_MAIL),
361 KEY(5, 3, KEY_MINUS),
362 KEY(5, 4, KEY_SPACE),
363 KEY(5, 5, KEY_COMMA),
365 KEY(5, 11, CORGI_KEY_FN),
366 KEY(6, 0, KEY_SYSRQ),
367 KEY(6, 1, CORGI_KEY_JAP1),
368 KEY(6, 2, CORGI_KEY_JAP2),
369 KEY(6, 3, CORGI_KEY_CANCEL),
370 KEY(6, 4, CORGI_KEY_OK),
371 KEY(6, 5, CORGI_KEY_MENU),
374 KEY(6, 8, KEY_RIGHT),
375 KEY(7, 0, CORGI_KEY_OFF),
376 KEY(7, 1, CORGI_KEY_EXOK),
377 KEY(7, 2, CORGI_KEY_EXCANCEL),
378 KEY(7, 3, CORGI_KEY_EXJOGDOWN),
379 KEY(7, 4, CORGI_KEY_EXJOGUP),
382 static struct matrix_keymap_data corgikbd_keymap_data = {
383 .keymap = corgikbd_keymap,
384 .keymap_size = ARRAY_SIZE(corgikbd_keymap),
387 static const int corgikbd_row_gpios[] =
388 { 58, 59, 60, 61, 62, 63, 64, 65 };
389 static const int corgikbd_col_gpios[] =
390 { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
392 static struct matrix_keypad_platform_data corgikbd_pdata = {
393 .keymap_data = &corgikbd_keymap_data,
394 .row_gpios = corgikbd_row_gpios,
395 .col_gpios = corgikbd_col_gpios,
396 .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
397 .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
398 .col_scan_delay_us = 10,
403 static struct platform_device corgikbd_device = {
404 .name = "matrix-keypad",
407 .platform_data = &corgikbd_pdata,
414 static struct gpio_led corgi_gpio_leds[] = {
416 .name = "corgi:amber:charge",
417 .default_trigger = "sharpsl-charge",
418 .gpio = CORGI_GPIO_LED_ORANGE,
421 .name = "corgi:green:mail",
422 .default_trigger = "nand-disk",
423 .gpio = CORGI_GPIO_LED_GREEN,
427 static struct gpio_led_platform_data corgi_gpio_leds_info = {
428 .leds = corgi_gpio_leds,
429 .num_leds = ARRAY_SIZE(corgi_gpio_leds),
432 static struct platform_device corgiled_device = {
436 .platform_data = &corgi_gpio_leds_info,
443 * The card detect interrupt isn't debounced so we delay it by 250ms
444 * to give the card a chance to fully insert/eject.
446 static struct pxamci_platform_data corgi_mci_platform_data = {
447 .detect_delay_ms = 250,
448 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
449 .gpio_card_detect = CORGI_GPIO_nSD_DETECT,
450 .gpio_card_ro = CORGI_GPIO_nSD_WP,
451 .gpio_power = CORGI_GPIO_SD_PWR,
458 static struct pxaficp_platform_data corgi_ficp_platform_data = {
459 .gpio_pwdown = CORGI_GPIO_IR_ON,
460 .transceiver_cap = IR_SIRMODE | IR_OFF,
465 * USB Device Controller
467 static struct pxa2xx_udc_mach_info udc_info __initdata = {
469 /* no connect GPIO; corgi can't tell connection status */
470 .gpio_pullup = CORGI_GPIO_USB_PULLUP,
473 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
474 static struct pxa2xx_spi_master corgi_spi_info = {
478 static void corgi_wait_for_hsync(void)
480 while (gpio_get_value(CORGI_GPIO_HSYNC))
483 while (!gpio_get_value(CORGI_GPIO_HSYNC))
487 static struct ads7846_platform_data corgi_ads7846_info = {
489 .vref_delay_usecs = 100,
492 .gpio_pendown = CORGI_GPIO_TP_INT,
493 .wait_for_sync = corgi_wait_for_hsync,
496 static struct pxa2xx_spi_chip corgi_ads7846_chip = {
497 .gpio_cs = CORGI_GPIO_ADS7846_CS,
500 static void corgi_bl_kick_battery(void)
502 void (*kick_batt)(void);
504 kick_batt = symbol_get(sharpsl_battery_kick);
507 symbol_put(sharpsl_battery_kick);
511 static struct corgi_lcd_platform_data corgi_lcdcon_info = {
512 .init_mode = CORGI_LCD_MODE_VGA,
513 .max_intensity = 0x2f,
514 .default_intensity = 0x1f,
516 .gpio_backlight_cont = CORGI_GPIO_BACKLIGHT_CONT,
517 .gpio_backlight_on = -1,
518 .kick_battery = corgi_bl_kick_battery,
521 static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
522 .gpio_cs = CORGI_GPIO_LCDCON_CS,
525 static struct pxa2xx_spi_chip corgi_max1111_chip = {
526 .gpio_cs = CORGI_GPIO_MAX1111_CS,
529 static struct spi_board_info corgi_spi_devices[] = {
531 .modalias = "ads7846",
532 .max_speed_hz = 1200000,
535 .platform_data = &corgi_ads7846_info,
536 .controller_data= &corgi_ads7846_chip,
537 .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
539 .modalias = "corgi-lcd",
540 .max_speed_hz = 50000,
543 .platform_data = &corgi_lcdcon_info,
544 .controller_data= &corgi_lcdcon_chip,
546 .modalias = "max1111",
547 .max_speed_hz = 450000,
550 .controller_data= &corgi_max1111_chip,
554 static void __init corgi_init_spi(void)
556 pxa2xx_set_spi_info(1, &corgi_spi_info);
557 spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
560 static inline void corgi_init_spi(void) {}
563 static struct mtd_partition sharpsl_nand_partitions[] = {
565 .name = "System Area",
567 .size = 7 * 1024 * 1024,
570 .name = "Root Filesystem",
571 .offset = 7 * 1024 * 1024,
572 .size = 25 * 1024 * 1024,
575 .name = "Home Filesystem",
576 .offset = MTDPART_OFS_APPEND,
577 .size = MTDPART_SIZ_FULL,
581 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
583 static struct nand_bbt_descr sharpsl_bbt = {
587 .pattern = scan_ff_pattern
590 static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = {
591 .badblock_pattern = &sharpsl_bbt,
592 .partitions = sharpsl_nand_partitions,
593 .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions),
596 static struct resource sharpsl_nand_resources[] = {
600 .flags = IORESOURCE_MEM,
604 static struct platform_device sharpsl_nand_device = {
605 .name = "sharpsl-nand",
607 .resource = sharpsl_nand_resources,
608 .num_resources = ARRAY_SIZE(sharpsl_nand_resources),
609 .dev.platform_data = &sharpsl_nand_platform_data,
612 static struct mtd_partition sharpsl_rom_parts[] = {
614 .name ="Boot PROM Filesystem",
615 .offset = 0x00120000,
616 .size = MTDPART_SIZ_FULL,
620 static struct physmap_flash_data sharpsl_rom_data = {
622 .nr_parts = ARRAY_SIZE(sharpsl_rom_parts),
623 .parts = sharpsl_rom_parts,
626 static struct resource sharpsl_rom_resources[] = {
630 .flags = IORESOURCE_MEM,
634 static struct platform_device sharpsl_rom_device = {
635 .name = "physmap-flash",
637 .resource = sharpsl_rom_resources,
638 .num_resources = ARRAY_SIZE(sharpsl_rom_resources),
639 .dev.platform_data = &sharpsl_rom_data,
642 static struct platform_device *devices[] __initdata = {
647 &sharpsl_nand_device,
651 static struct i2c_board_info __initdata corgi_i2c_devices[] = {
652 { I2C_BOARD_INFO("wm8731", 0x1b) },
655 static void corgi_poweroff(void)
657 if (!machine_is_corgi())
658 /* Green LED off tells the bootloader to halt */
659 gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
661 arm_machine_restart('h', NULL);
664 static void corgi_restart(char mode, const char *cmd)
666 if (!machine_is_corgi())
667 /* Green LED on tells the bootloader to reboot */
668 gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
670 arm_machine_restart('h', cmd);
673 static void __init corgi_init(void)
675 pm_power_off = corgi_poweroff;
676 arm_pm_restart = corgi_restart;
678 /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
681 pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
683 /* allow wakeup from various GPIOs */
684 gpio_set_wake(CORGI_GPIO_KEY_INT, 1);
685 gpio_set_wake(CORGI_GPIO_WAKEUP, 1);
686 gpio_set_wake(CORGI_GPIO_AC_IN, 1);
687 gpio_set_wake(CORGI_GPIO_CHRG_FULL, 1);
689 if (!machine_is_corgi())
690 gpio_set_wake(CORGI_GPIO_MAIN_BAT_LOW, 1);
692 pxa_set_ffuart_info(NULL);
693 pxa_set_btuart_info(NULL);
694 pxa_set_stuart_info(NULL);
698 pxa_set_udc_info(&udc_info);
699 pxa_set_mci_info(&corgi_mci_platform_data);
700 pxa_set_ficp_info(&corgi_ficp_platform_data);
701 pxa_set_i2c_info(NULL);
702 i2c_register_board_info(0, ARRAY_AND_SIZE(corgi_i2c_devices));
704 platform_scoop_config = &corgi_pcmcia_config;
706 if (machine_is_husky())
707 sharpsl_nand_partitions[1].size = 53 * 1024 * 1024;
709 platform_add_devices(devices, ARRAY_SIZE(devices));
712 static void __init fixup_corgi(struct machine_desc *desc,
713 struct tag *tags, char **cmdline, struct meminfo *mi)
715 sharpsl_save_param();
717 mi->bank[0].start = 0xa0000000;
718 mi->bank[0].node = 0;
719 if (machine_is_corgi())
720 mi->bank[0].size = (32*1024*1024);
722 mi->bank[0].size = (64*1024*1024);
725 #ifdef CONFIG_MACH_CORGI
726 MACHINE_START(CORGI, "SHARP Corgi")
727 .phys_io = 0x40000000,
728 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
729 .fixup = fixup_corgi,
730 .map_io = pxa_map_io,
731 .init_irq = pxa25x_init_irq,
732 .init_machine = corgi_init,
737 #ifdef CONFIG_MACH_SHEPHERD
738 MACHINE_START(SHEPHERD, "SHARP Shepherd")
739 .phys_io = 0x40000000,
740 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
741 .fixup = fixup_corgi,
742 .map_io = pxa_map_io,
743 .init_irq = pxa25x_init_irq,
744 .init_machine = corgi_init,
749 #ifdef CONFIG_MACH_HUSKY
750 MACHINE_START(HUSKY, "SHARP Husky")
751 .phys_io = 0x40000000,
752 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
753 .fixup = fixup_corgi,
754 .map_io = pxa_map_io,
755 .init_irq = pxa25x_init_irq,
756 .init_machine = corgi_init,