1 /* linux/arch/arm/mach-s3c2410/mach-bast.c
3 * Copyright 2003-2008 Simtec Electronics
4 * Ben Dooks <ben@simtec.co.uk>
6 * http://www.simtec.co.uk/products/EB2410ITX/
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #include <linux/kernel.h>
14 #include <linux/types.h>
15 #include <linux/interrupt.h>
16 #include <linux/list.h>
17 #include <linux/timer.h>
18 #include <linux/init.h>
19 #include <linux/gpio.h>
20 #include <linux/syscore_ops.h>
21 #include <linux/serial_core.h>
22 #include <linux/platform_device.h>
23 #include <linux/dm9000.h>
24 #include <linux/ata_platform.h>
25 #include <linux/i2c.h>
28 #include <net/ax88796.h>
30 #include <asm/mach/arch.h>
31 #include <asm/mach/map.h>
32 #include <asm/mach/irq.h>
34 #include <mach/bast-map.h>
35 #include <mach/bast-irq.h>
36 #include <mach/bast-cpld.h>
38 #include <mach/hardware.h>
40 #include <asm/mach-types.h>
42 //#include <asm/debug-ll.h>
43 #include <plat/regs-serial.h>
44 #include <mach/regs-gpio.h>
45 #include <mach/regs-mem.h>
46 #include <mach/regs-lcd.h>
48 #include <linux/platform_data/hwmon-s3c.h>
49 #include <linux/platform_data/mtd-nand-s3c2410.h>
50 #include <linux/platform_data/i2c-s3c2410.h>
53 #include <linux/mtd/mtd.h>
54 #include <linux/mtd/nand.h>
55 #include <linux/mtd/nand_ecc.h>
56 #include <linux/mtd/partitions.h>
58 #include <linux/serial_8250.h>
60 #include <plat/clock.h>
61 #include <plat/devs.h>
63 #include <plat/cpu-freq.h>
64 #include <plat/gpio-cfg.h>
65 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
70 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
72 /* macros for virtual address mods for the io space entries */
73 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
74 #define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
75 #define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
76 #define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
78 /* macros to modify the physical addresses for io space */
80 #define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
81 #define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
82 #define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
83 #define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
85 static struct map_desc bast_iodesc[] __initdata = {
88 .virtual = (u32)S3C24XX_VA_ISA_BYTE,
89 .pfn = PA_CS2(BAST_PA_ISAIO),
93 .virtual = (u32)S3C24XX_VA_ISA_WORD,
94 .pfn = PA_CS3(BAST_PA_ISAIO),
98 /* bast CPLD control registers, and external interrupt controls */
100 .virtual = (u32)BAST_VA_CTRL1,
101 .pfn = __phys_to_pfn(BAST_PA_CTRL1),
105 .virtual = (u32)BAST_VA_CTRL2,
106 .pfn = __phys_to_pfn(BAST_PA_CTRL2),
110 .virtual = (u32)BAST_VA_CTRL3,
111 .pfn = __phys_to_pfn(BAST_PA_CTRL3),
115 .virtual = (u32)BAST_VA_CTRL4,
116 .pfn = __phys_to_pfn(BAST_PA_CTRL4),
122 .virtual = (u32)BAST_VA_PC104_IRQREQ,
123 .pfn = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
127 .virtual = (u32)BAST_VA_PC104_IRQRAW,
128 .pfn = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
132 .virtual = (u32)BAST_VA_PC104_IRQMASK,
133 .pfn = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
138 /* peripheral space... one for each of fast/slow/byte/16bit */
139 /* note, ide is only decoded in word space, even though some registers
143 { VA_C2(BAST_VA_ISAIO), PA_CS2(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
144 { VA_C2(BAST_VA_ISAMEM), PA_CS2(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
145 { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
148 { VA_C3(BAST_VA_ISAIO), PA_CS3(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
149 { VA_C3(BAST_VA_ISAMEM), PA_CS3(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
150 { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
153 { VA_C4(BAST_VA_ISAIO), PA_CS4(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
154 { VA_C4(BAST_VA_ISAMEM), PA_CS4(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
155 { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
158 { VA_C5(BAST_VA_ISAIO), PA_CS5(BAST_PA_ISAIO), SZ_16M, MT_DEVICE },
159 { VA_C5(BAST_VA_ISAMEM), PA_CS5(BAST_PA_ISAMEM), SZ_16M, MT_DEVICE },
160 { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO), SZ_1M, MT_DEVICE },
163 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
164 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
165 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
167 static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
182 /* port 2 is not actually used */
192 /* NAND Flash on BAST board */
195 static int bast_pm_suspend(void)
197 /* ensure that an nRESET is not generated on resume. */
198 gpio_direction_output(S3C2410_GPA(21), 1);
202 static void bast_pm_resume(void)
204 s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
208 #define bast_pm_suspend NULL
209 #define bast_pm_resume NULL
212 static struct syscore_ops bast_pm_syscore_ops = {
213 .suspend = bast_pm_suspend,
214 .resume = bast_pm_resume,
217 static int smartmedia_map[] = { 0 };
218 static int chip0_map[] = { 1 };
219 static int chip1_map[] = { 2 };
220 static int chip2_map[] = { 3 };
222 static struct mtd_partition __initdata bast_default_nand_part[] = {
224 .name = "Boot Agent",
230 .size = SZ_4M - SZ_16K,
236 .size = MTDPART_SIZ_FULL,
240 /* the bast has 4 selectable slots for nand-flash, the three
241 * on-board chip areas, as well as the external SmartMedia
244 * Note, there is no current hot-plug support for the SmartMedia
248 static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
250 .name = "SmartMedia",
252 .nr_map = smartmedia_map,
253 .options = NAND_SCAN_SILENT_NODEV,
254 .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
255 .partitions = bast_default_nand_part,
261 .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
262 .partitions = bast_default_nand_part,
268 .options = NAND_SCAN_SILENT_NODEV,
269 .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
270 .partitions = bast_default_nand_part,
276 .options = NAND_SCAN_SILENT_NODEV,
277 .nr_partitions = ARRAY_SIZE(bast_default_nand_part),
278 .partitions = bast_default_nand_part,
282 static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
286 slot = set->nr_map[slot] & 3;
288 pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
289 slot, set, set->nr_map);
291 tmp = __raw_readb(BAST_VA_CTRL2);
292 tmp &= BAST_CPLD_CTLR2_IDERST;
294 tmp |= BAST_CPLD_CTRL2_WNAND;
296 pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
298 __raw_writeb(tmp, BAST_VA_CTRL2);
301 static struct s3c2410_platform_nand __initdata bast_nand_info = {
305 .nr_sets = ARRAY_SIZE(bast_nand_sets),
306 .sets = bast_nand_sets,
307 .select_chip = bast_nand_select,
312 static struct resource bast_dm9k_resource[] = {
313 [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
314 [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
315 [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
316 | IORESOURCE_IRQ_HIGHLEVEL),
319 /* for the moment we limit ourselves to 16bit IO until some
320 * better IO routines can be written and tested
323 static struct dm9000_plat_data bast_dm9k_platdata = {
324 .flags = DM9000_PLATF_16BITONLY,
327 static struct platform_device bast_device_dm9k = {
330 .num_resources = ARRAY_SIZE(bast_dm9k_resource),
331 .resource = bast_dm9k_resource,
333 .platform_data = &bast_dm9k_platdata,
339 #define SERIAL_BASE (S3C2410_CS2 + BAST_PA_SUPERIO)
340 #define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
341 #define SERIAL_CLK (1843200)
343 static struct plat_serial8250_port bast_sio_data[] = {
345 .mapbase = SERIAL_BASE + 0x2f8,
346 .irq = IRQ_PCSERIAL1,
347 .flags = SERIAL_FLAGS,
350 .uartclk = SERIAL_CLK,
353 .mapbase = SERIAL_BASE + 0x3f8,
354 .irq = IRQ_PCSERIAL2,
355 .flags = SERIAL_FLAGS,
358 .uartclk = SERIAL_CLK,
363 static struct platform_device bast_sio = {
364 .name = "serial8250",
365 .id = PLAT8250_DEV_PLATFORM,
367 .platform_data = &bast_sio_data,
371 /* we have devices on the bus which cannot work much over the
372 * standard 100KHz i2c bus frequency
375 static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
378 .frequency = 100*1000,
381 /* Asix AX88796 10/100 ethernet controller */
383 static struct ax_plat_data bast_asix_platdata = {
384 .flags = AXFLG_MAC_FROMDEV,
390 static struct resource bast_asix_resource[] = {
391 [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
392 [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
393 [2] = DEFINE_RES_IRQ(IRQ_ASIX),
396 static struct platform_device bast_device_asix = {
399 .num_resources = ARRAY_SIZE(bast_asix_resource),
400 .resource = bast_asix_resource,
402 .platform_data = &bast_asix_platdata
406 /* Asix AX88796 10/100 ethernet controller parallel port */
408 static struct resource bast_asixpp_resource[] = {
409 [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
413 static struct platform_device bast_device_axpp = {
414 .name = "ax88796-pp",
416 .num_resources = ARRAY_SIZE(bast_asixpp_resource),
417 .resource = bast_asixpp_resource,
420 /* LCD/VGA controller */
422 static struct s3c2410fb_display __initdata bast_lcd_info[] = {
424 .type = S3C2410_LCDCON1_TFT,
439 .lcdcon5 = 0x00014b02,
442 .type = S3C2410_LCDCON1_TFT,
457 .lcdcon5 = 0x00014b02,
460 .type = S3C2410_LCDCON1_TFT,
475 .lcdcon5 = 0x00014b02,
479 /* LCD/VGA controller */
481 static struct s3c2410fb_mach_info __initdata bast_fb_info = {
483 .displays = bast_lcd_info,
484 .num_displays = ARRAY_SIZE(bast_lcd_info),
485 .default_display = 1,
488 /* I2C devices fitted. */
490 static struct i2c_board_info bast_i2c_devs[] __initdata = {
492 I2C_BOARD_INFO("tlv320aic23", 0x1a),
494 I2C_BOARD_INFO("simtec-pmu", 0x6b),
496 I2C_BOARD_INFO("ch7013", 0x75),
500 static struct s3c_hwmon_pdata bast_hwmon_info = {
501 /* LCD contrast (0-6.6V) */
502 .in[0] = &(struct s3c_hwmon_chcfg) {
503 .name = "lcd-contrast",
507 /* LED current feedback */
508 .in[1] = &(struct s3c_hwmon_chcfg) {
509 .name = "led-feedback",
513 /* LCD feedback (0-6.6V) */
514 .in[2] = &(struct s3c_hwmon_chcfg) {
515 .name = "lcd-feedback",
519 /* Vcore (1.8-2.0V), Vref 3.3V */
520 .in[3] = &(struct s3c_hwmon_chcfg) {
527 /* Standard BAST devices */
528 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
530 static struct platform_device *bast_devices[] __initdata = {
545 static struct clk *bast_clocks[] __initdata = {
553 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
554 .refresh = 7800, /* 7.8usec */
559 static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
564 static void __init bast_map_io(void)
566 /* initialise the clocks */
568 s3c24xx_dclk0.parent = &clk_upll;
569 s3c24xx_dclk0.rate = 12*1000*1000;
571 s3c24xx_dclk1.parent = &clk_upll;
572 s3c24xx_dclk1.rate = 24*1000*1000;
574 s3c24xx_clkout0.parent = &s3c24xx_dclk0;
575 s3c24xx_clkout1.parent = &s3c24xx_dclk1;
577 s3c24xx_uclk.parent = &s3c24xx_clkout1;
579 s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
581 s3c_hwmon_set_platdata(&bast_hwmon_info);
583 s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
584 s3c24xx_init_clocks(0);
585 s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
588 static void __init bast_init(void)
590 register_syscore_ops(&bast_pm_syscore_ops);
592 s3c_i2c0_set_platdata(&bast_i2c_info);
593 s3c_nand_set_platdata(&bast_nand_info);
594 s3c24xx_fb_set_platdata(&bast_fb_info);
595 platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
597 i2c_register_board_info(0, bast_i2c_devs,
598 ARRAY_SIZE(bast_i2c_devs));
602 simtec_audio_add(NULL, true, &bast_audio);
604 WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
606 s3c_cpufreq_setboard(&bast_cpufreq);
609 MACHINE_START(BAST, "Simtec-BAST")
610 /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
611 .atag_offset = 0x100,
612 .map_io = bast_map_io,
613 .init_irq = s3c24xx_init_irq,
614 .init_machine = bast_init,
615 .init_time = s3c24xx_timer_init,
616 .restart = s3c2410_restart,