2 * linux/arch/arm/mach-s3c64xx/mach-smartq.c
4 * Copyright (C) 2010 Maurus Cuelenaere
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include <linux/delay.h>
14 #include <linux/gpio.h>
15 #include <linux/init.h>
16 #include <linux/platform_device.h>
17 #include <linux/pwm_backlight.h>
18 #include <linux/serial_core.h>
19 #include <linux/spi/spi_gpio.h>
20 #include <linux/usb/gpio_vbus.h>
21 #include <linux/platform_data/s3c-hsotg.h>
23 #include <asm/mach-types.h>
24 #include <asm/mach/map.h>
27 #include <mach/regs-gpio.h>
29 #include <plat/clock.h>
31 #include <plat/devs.h>
32 #include <linux/platform_data/i2c-s3c2410.h>
33 #include <plat/gpio-cfg.h>
34 #include <linux/platform_data/hwmon-s3c.h>
35 #include <plat/regs-serial.h>
36 #include <linux/platform_data/usb-ohci-s3c2410.h>
37 #include <plat/sdhci.h>
38 #include <linux/platform_data/touchscreen-s3c2410.h>
40 #include <video/platform_lcd.h>
43 #include "regs-modem.h"
45 #define UCON S3C2410_UCON_DEFAULT
46 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
47 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
49 static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
73 static void smartq_usb_host_powercontrol(int port, int to)
75 pr_debug("%s(%d, %d)\n", __func__, port, to);
78 gpio_set_value(S3C64XX_GPL(0), to);
79 gpio_set_value(S3C64XX_GPL(1), to);
83 static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
85 struct s3c2410_hcd_info *info = pw;
87 if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
88 pr_debug("%s: over-current irq (oc detected)\n", __func__);
89 s3c2410_usb_report_oc(info, 3);
91 pr_debug("%s: over-current irq (oc cleared)\n", __func__);
92 s3c2410_usb_report_oc(info, 0);
98 static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
102 /* This isn't present on a SmartQ 5 board */
103 if (machine_is_smartq5())
107 ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
108 smartq_usb_host_ocirq, IRQF_DISABLED |
109 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
110 "USB host overcurrent", info);
112 pr_err("failed to request usb oc irq: %d\n", ret);
114 free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
118 static struct s3c2410_hcd_info smartq_usb_host_info = {
120 .flags = S3C_HCDFLG_USED
126 .power_control = smartq_usb_host_powercontrol,
127 .enable_oc = smartq_usb_host_enableoc,
130 static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
131 .gpio_vbus = S3C64XX_GPL(9),
133 .gpio_vbus_inverted = true,
136 static struct platform_device smartq_usb_otg_vbus_dev = {
138 .dev.platform_data = &smartq_usb_otg_vbus_pdata,
141 static int smartq_bl_init(struct device *dev)
143 s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
148 static struct platform_pwm_backlight_data smartq_backlight_data = {
150 .max_brightness = 1000,
151 .dft_brightness = 600,
152 .pwm_period_ns = 1000000000 / (1000 * 20),
153 .init = smartq_bl_init,
156 static struct platform_device smartq_backlight_device = {
157 .name = "pwm-backlight",
159 .parent = &s3c_device_timer[1].dev,
160 .platform_data = &smartq_backlight_data,
164 static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
167 .oversampling_shift = 4,
170 static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
172 .cd_type = S3C_SDHCI_CD_PERMANENT,
175 static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
176 /* Battery voltage (?-4.2V) */
177 .in[0] = &(struct s3c_hwmon_chcfg) {
178 .name = "smartq:battery-voltage",
182 /* Reference voltage (1.2V) */
183 .in[1] = &(struct s3c_hwmon_chcfg) {
184 .name = "smartq:reference-voltage",
190 static struct s3c_hsotg_plat smartq_hsotg_pdata;
192 static int __init smartq_lcd_setup_gpio(void)
196 ret = gpio_request(S3C64XX_GPM(3), "LCD power");
201 gpio_direction_output(S3C64XX_GPM(3), 0);
207 static struct spi_gpio_platform_data smartq_lcd_control = {
208 .sck = S3C64XX_GPM(1),
209 .mosi = S3C64XX_GPM(2),
210 .miso = S3C64XX_GPM(2),
213 static struct platform_device smartq_lcd_control_device = {
216 .dev.platform_data = &smartq_lcd_control,
219 static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
221 gpio_direction_output(S3C64XX_GPM(3), power);
224 static struct plat_lcd_data smartq_lcd_power_data = {
225 .set_power = smartq_lcd_power_set,
228 static struct platform_device smartq_lcd_power_device = {
229 .name = "platform-lcd",
230 .dev.parent = &s3c_device_fb.dev,
231 .dev.platform_data = &smartq_lcd_power_data,
234 static struct i2c_board_info smartq_i2c_devs[] __initdata = {
235 { I2C_BOARD_INFO("wm8987", 0x1a), },
238 static struct platform_device *smartq_devices[] __initdata = {
239 &s3c_device_hsmmc1, /* Init iNAND first, ... */
240 &s3c_device_hsmmc0, /* ... then the external SD card */
248 &s3c_device_timer[1],
250 &s3c_device_usb_hsotg,
251 &s3c64xx_device_iis0,
252 &smartq_backlight_device,
253 &smartq_lcd_control_device,
254 &smartq_lcd_power_device,
255 &smartq_usb_otg_vbus_dev,
258 static void __init smartq_lcd_mode_set(void)
262 /* set the LCD type */
263 tmp = __raw_readl(S3C64XX_SPCON);
264 tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
265 tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
266 __raw_writel(tmp, S3C64XX_SPCON);
268 /* remove the LCD bypass */
269 tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
270 tmp &= ~MIFPCON_LCD_BYPASS;
271 __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
274 static void smartq_power_off(void)
276 gpio_direction_output(S3C64XX_GPK(15), 1);
279 static int __init smartq_power_off_init(void)
283 ret = gpio_request(S3C64XX_GPK(15), "Power control");
285 pr_err("%s: failed to get GPK15\n", __func__);
290 gpio_direction_output(S3C64XX_GPK(15), 0);
292 pm_power_off = smartq_power_off;
297 static int __init smartq_usb_host_init(void)
301 ret = gpio_request(S3C64XX_GPL(0), "USB power control");
303 pr_err("%s: failed to get GPL0\n", __func__);
307 ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
309 pr_err("%s: failed to get GPL1\n", __func__);
313 if (!machine_is_smartq5()) {
314 /* This isn't present on a SmartQ 5 board */
315 ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
317 pr_err("%s: failed to get GPL10\n", __func__);
323 gpio_direction_output(S3C64XX_GPL(0), 0);
324 gpio_direction_output(S3C64XX_GPL(1), 0);
325 if (!machine_is_smartq5())
326 gpio_direction_input(S3C64XX_GPL(10));
328 s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
333 gpio_free(S3C64XX_GPL(1));
335 gpio_free(S3C64XX_GPL(0));
339 static int __init smartq_usb_otg_init(void)
341 clk_xusbxti.rate = 12000000;
346 static int __init smartq_wifi_init(void)
350 ret = gpio_request(S3C64XX_GPK(1), "wifi control");
352 pr_err("%s: failed to get GPK1\n", __func__);
356 ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
358 pr_err("%s: failed to get GPK2\n", __func__);
359 gpio_free(S3C64XX_GPK(1));
364 gpio_direction_output(S3C64XX_GPK(1), 1);
367 gpio_direction_output(S3C64XX_GPK(2), 0);
369 gpio_set_value(S3C64XX_GPK(2), 1);
370 gpio_direction_input(S3C64XX_GPK(2));
375 static struct map_desc smartq_iodesc[] __initdata = {};
376 void __init smartq_map_io(void)
378 s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
379 s3c24xx_init_clocks(12000000);
380 s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
382 smartq_lcd_mode_set();
385 void __init smartq_machine_init(void)
387 s3c_i2c0_set_platdata(NULL);
388 s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
389 s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
390 s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
391 s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
392 s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
394 i2c_register_board_info(0, smartq_i2c_devs,
395 ARRAY_SIZE(smartq_i2c_devs));
397 WARN_ON(smartq_lcd_setup_gpio());
398 WARN_ON(smartq_power_off_init());
399 WARN_ON(smartq_usb_host_init());
400 WARN_ON(smartq_usb_otg_init());
401 WARN_ON(smartq_wifi_init());
403 platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));