1 /* linux/arch/arm/mach-s5pv210/mach-aquila.c
3 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com/
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/init.h>
14 #include <linux/serial_core.h>
16 #include <linux/i2c.h>
17 #include <linux/i2c-gpio.h>
18 #include <linux/mfd/max8998.h>
19 #include <linux/mfd/wm8994/pdata.h>
20 #include <linux/regulator/fixed.h>
21 #include <linux/gpio_keys.h>
22 #include <linux/input.h>
23 #include <linux/gpio.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/map.h>
27 #include <asm/setup.h>
28 #include <asm/mach-types.h>
31 #include <mach/regs-clock.h>
32 #include <mach/regs-fb.h>
34 #include <plat/gpio-cfg.h>
35 #include <plat/regs-serial.h>
36 #include <plat/s5pv210.h>
37 #include <plat/devs.h>
40 #include <plat/fimc-core.h>
41 #include <plat/sdhci.h>
42 #include <plat/s5p-time.h>
44 /* Following are default values for UCON, ULCON and UFCON UART registers */
45 #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
46 S3C2410_UCON_RXILEVEL | \
47 S3C2410_UCON_TXIRQMODE | \
48 S3C2410_UCON_RXIRQMODE | \
49 S3C2410_UCON_RXFIFO_TOI | \
50 S3C2443_UCON_RXERR_IRQEN)
52 #define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
54 #define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
56 static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
60 .ucon = AQUILA_UCON_DEFAULT,
61 .ulcon = AQUILA_ULCON_DEFAULT,
63 * Actually UART0 can support 256 bytes fifo, but aquila board
64 * supports 128 bytes fifo because of initial chip bug
66 .ufcon = AQUILA_UFCON_DEFAULT |
67 S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
72 .ucon = AQUILA_UCON_DEFAULT,
73 .ulcon = AQUILA_ULCON_DEFAULT,
74 .ufcon = AQUILA_UFCON_DEFAULT |
75 S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
80 .ucon = AQUILA_UCON_DEFAULT,
81 .ulcon = AQUILA_ULCON_DEFAULT,
82 .ufcon = AQUILA_UFCON_DEFAULT |
83 S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
88 .ucon = AQUILA_UCON_DEFAULT,
89 .ulcon = AQUILA_ULCON_DEFAULT,
90 .ufcon = AQUILA_UFCON_DEFAULT |
91 S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
96 static struct s3c_fb_pd_win aquila_fb_win0 = {
111 static struct s3c_fb_pd_win aquila_fb_win1 = {
126 static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
127 .win[0] = &aquila_fb_win0,
128 .win[1] = &aquila_fb_win1,
129 .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
130 .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
131 VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
132 .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
135 /* MAX8998 regulators */
136 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
138 static struct regulator_init_data aquila_ldo2_data = {
140 .name = "VALIVE_1.1V",
151 static struct regulator_init_data aquila_ldo3_data = {
153 .name = "VUSB+MIPI_1.1V",
161 static struct regulator_init_data aquila_ldo4_data = {
170 static struct regulator_init_data aquila_ldo5_data = {
179 static struct regulator_init_data aquila_ldo6_data = {
188 static struct regulator_init_data aquila_ldo7_data = {
199 static struct regulator_init_data aquila_ldo8_data = {
201 .name = "VUSB+VADC_3.3V",
209 static struct regulator_init_data aquila_ldo9_data = {
211 .name = "VCC+VCAM_2.8V",
219 static struct regulator_init_data aquila_ldo10_data = {
229 static struct regulator_init_data aquila_ldo11_data = {
231 .name = "CAM_IO_2.8V",
239 static struct regulator_init_data aquila_ldo12_data = {
241 .name = "CAM_ISP_1.2V",
249 static struct regulator_init_data aquila_ldo13_data = {
251 .name = "CAM_A_2.8V",
259 static struct regulator_init_data aquila_ldo14_data = {
261 .name = "CAM_CIF_1.8V",
269 static struct regulator_init_data aquila_ldo15_data = {
271 .name = "CAM_AF_3.3V",
279 static struct regulator_init_data aquila_ldo16_data = {
281 .name = "VMIPI_1.8V",
289 static struct regulator_init_data aquila_ldo17_data = {
291 .name = "CAM_8M_1.8V",
300 static struct regulator_consumer_supply buck1_consumer =
301 REGULATOR_SUPPLY("vddarm", NULL);
303 static struct regulator_consumer_supply buck2_consumer =
304 REGULATOR_SUPPLY("vddint", NULL);
306 static struct regulator_init_data aquila_buck1_data = {
312 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
313 REGULATOR_CHANGE_STATUS,
315 .num_consumer_supplies = 1,
316 .consumer_supplies = &buck1_consumer,
319 static struct regulator_init_data aquila_buck2_data = {
325 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
326 REGULATOR_CHANGE_STATUS,
328 .num_consumer_supplies = 1,
329 .consumer_supplies = &buck2_consumer,
332 static struct regulator_init_data aquila_buck3_data = {
344 static struct regulator_init_data aquila_buck4_data = {
346 .name = "CAM_CORE_1.2V",
354 static struct max8998_regulator_data aquila_regulators[] = {
355 { MAX8998_LDO2, &aquila_ldo2_data },
356 { MAX8998_LDO3, &aquila_ldo3_data },
357 { MAX8998_LDO4, &aquila_ldo4_data },
358 { MAX8998_LDO5, &aquila_ldo5_data },
359 { MAX8998_LDO6, &aquila_ldo6_data },
360 { MAX8998_LDO7, &aquila_ldo7_data },
361 { MAX8998_LDO8, &aquila_ldo8_data },
362 { MAX8998_LDO9, &aquila_ldo9_data },
363 { MAX8998_LDO10, &aquila_ldo10_data },
364 { MAX8998_LDO11, &aquila_ldo11_data },
365 { MAX8998_LDO12, &aquila_ldo12_data },
366 { MAX8998_LDO13, &aquila_ldo13_data },
367 { MAX8998_LDO14, &aquila_ldo14_data },
368 { MAX8998_LDO15, &aquila_ldo15_data },
369 { MAX8998_LDO16, &aquila_ldo16_data },
370 { MAX8998_LDO17, &aquila_ldo17_data },
371 { MAX8998_BUCK1, &aquila_buck1_data },
372 { MAX8998_BUCK2, &aquila_buck2_data },
373 { MAX8998_BUCK3, &aquila_buck3_data },
374 { MAX8998_BUCK4, &aquila_buck4_data },
377 static struct max8998_platform_data aquila_max8998_pdata = {
378 .num_regulators = ARRAY_SIZE(aquila_regulators),
379 .regulators = aquila_regulators,
380 .buck1_set1 = S5PV210_GPH0(3),
381 .buck1_set2 = S5PV210_GPH0(4),
382 .buck2_set3 = S5PV210_GPH0(5),
383 .buck1_voltage1 = 1200000,
384 .buck1_voltage2 = 1200000,
385 .buck1_voltage3 = 1200000,
386 .buck1_voltage4 = 1200000,
387 .buck2_voltage1 = 1200000,
388 .buck2_voltage2 = 1200000,
392 static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
393 REGULATOR_SUPPLY("DBVDD", "5-001a"),
394 REGULATOR_SUPPLY("AVDD2", "5-001a"),
395 REGULATOR_SUPPLY("CPVDD", "5-001a"),
398 static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
399 REGULATOR_SUPPLY("SPKVDD1", "5-001a"),
400 REGULATOR_SUPPLY("SPKVDD2", "5-001a"),
403 static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
407 .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
408 .consumer_supplies = wm8994_fixed_voltage0_supplies,
411 static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
415 .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
416 .consumer_supplies = wm8994_fixed_voltage1_supplies,
419 static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
420 .supply_name = "VCC_1.8V_PDA",
421 .microvolts = 1800000,
423 .init_data = &wm8994_fixed_voltage0_init_data,
426 static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
427 .supply_name = "V_BAT",
428 .microvolts = 3700000,
430 .init_data = &wm8994_fixed_voltage1_init_data,
433 static struct platform_device wm8994_fixed_voltage0 = {
434 .name = "reg-fixed-voltage",
437 .platform_data = &wm8994_fixed_voltage0_config,
441 static struct platform_device wm8994_fixed_voltage1 = {
442 .name = "reg-fixed-voltage",
445 .platform_data = &wm8994_fixed_voltage1_config,
449 static struct regulator_consumer_supply wm8994_avdd1_supply =
450 REGULATOR_SUPPLY("AVDD1", "5-001a");
452 static struct regulator_consumer_supply wm8994_dcvdd_supply =
453 REGULATOR_SUPPLY("DCVDD", "5-001a");
455 static struct regulator_init_data wm8994_ldo1_data = {
457 .name = "AVDD1_3.0V",
458 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
460 .num_consumer_supplies = 1,
461 .consumer_supplies = &wm8994_avdd1_supply,
464 static struct regulator_init_data wm8994_ldo2_data = {
466 .name = "DCVDD_1.0V",
468 .num_consumer_supplies = 1,
469 .consumer_supplies = &wm8994_dcvdd_supply,
472 static struct wm8994_pdata wm8994_platform_data = {
473 /* configure gpio1 function: 0x0001(Logic level input/output) */
474 .gpio_defaults[0] = 0x0001,
475 /* configure gpio3/4/5/7 function for AIF2 voice */
476 .gpio_defaults[2] = 0x8100,
477 .gpio_defaults[3] = 0x8100,
478 .gpio_defaults[4] = 0x8100,
479 .gpio_defaults[6] = 0x0100,
480 /* configure gpio8/9/10/11 function for AIF3 BT */
481 .gpio_defaults[7] = 0x8100,
482 .gpio_defaults[8] = 0x0100,
483 .gpio_defaults[9] = 0x0100,
484 .gpio_defaults[10] = 0x0100,
485 .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
486 .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
490 #define AP_I2C_GPIO_PMIC_BUS_4 4
491 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
492 .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
493 .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
496 static struct platform_device aquila_i2c_gpio_pmic = {
498 .id = AP_I2C_GPIO_PMIC_BUS_4,
500 .platform_data = &aquila_i2c_gpio_pmic_data,
504 static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
505 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
507 /* 0xCC when SRAD = 0 */
508 I2C_BOARD_INFO("max8998", 0xCC >> 1),
509 .platform_data = &aquila_max8998_pdata,
514 /* GPIO I2C AP 1.8V */
515 #define AP_I2C_GPIO_BUS_5 5
516 static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
517 .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
518 .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
521 static struct platform_device aquila_i2c_gpio5 = {
523 .id = AP_I2C_GPIO_BUS_5,
525 .platform_data = &aquila_i2c_gpio5_data,
529 static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
531 /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
532 I2C_BOARD_INFO("wm8994", 0x1a),
533 .platform_data = &wm8994_platform_data,
537 /* PMIC Power button */
538 static struct gpio_keys_button aquila_gpio_keys_table[] = {
541 .gpio = S5PV210_GPH2(6),
542 .desc = "gpio-keys: KEY_POWER",
546 .debounce_interval = 1,
550 static struct gpio_keys_platform_data aquila_gpio_keys_data = {
551 .buttons = aquila_gpio_keys_table,
552 .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
555 static struct platform_device aquila_device_gpiokeys = {
558 .platform_data = &aquila_gpio_keys_data,
562 static void __init aquila_pmic_init(void)
564 /* AP_PMIC_IRQ: EINT7 */
565 s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
566 s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
569 s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
570 s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
574 static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
576 .cd_type = S3C_SDHCI_CD_PERMANENT,
580 static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
582 .cd_type = S3C_SDHCI_CD_EXTERNAL,
583 /* ext_cd_{init,cleanup} callbacks will be added later */
587 #define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
588 #define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
589 static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
591 .cd_type = S3C_SDHCI_CD_GPIO,
592 .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
593 .ext_cd_gpio_invert = 1,
596 static void aquila_setup_sdhci(void)
598 gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
599 gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
601 s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
602 s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
603 s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
606 static struct platform_device *aquila_devices[] __initdata = {
607 &aquila_i2c_gpio_pmic,
609 &aquila_device_gpiokeys,
618 &s5pv210_device_iis0,
619 &wm8994_fixed_voltage0,
620 &wm8994_fixed_voltage1,
623 static void __init aquila_sound_init(void)
629 * The Aquila board have a oscillator which provide main clock
630 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
631 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
633 gpio = S5PV210_GPH3(2); /* XEINT_26 */
634 gpio_request(gpio, "CODEC_XTAL_EN");
635 s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
636 s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
638 /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
639 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
640 * because it needs 24MHz clock to operate WM8994 codec.
642 __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
645 static void __init aquila_map_io(void)
647 s5p_init_io(NULL, 0, S5P_VA_CHIPID);
648 s3c24xx_init_clocks(24000000);
649 s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
650 s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
653 static void __init aquila_machine_init(void)
657 i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
658 ARRAY_SIZE(i2c_gpio_pmic_devs));
660 aquila_setup_sdhci();
662 s3c_fimc_setname(0, "s5p-fimc");
663 s3c_fimc_setname(1, "s5p-fimc");
664 s3c_fimc_setname(2, "s5p-fimc");
668 i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
669 ARRAY_SIZE(i2c_gpio5_devs));
672 s3c_fb_set_platdata(&aquila_lcd_pdata);
674 platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
677 MACHINE_START(AQUILA, "Aquila")
679 Marek Szyprowski <m.szyprowski@samsung.com>
680 Kyungmin Park <kyungmin.park@samsung.com> */
681 .boot_params = S5P_PA_SDRAM + 0x100,
682 .init_irq = s5pv210_init_irq,
683 .map_io = aquila_map_io,
684 .init_machine = aquila_machine_init,