1 /* linux/arch/arm/mach-s5pv210/mach-aquila.c
3 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com/
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/init.h>
14 #include <linux/serial_core.h>
16 #include <linux/i2c.h>
17 #include <linux/i2c-gpio.h>
18 #include <linux/mfd/max8998.h>
19 #include <linux/mfd/wm8994/pdata.h>
20 #include <linux/regulator/fixed.h>
21 #include <linux/gpio_keys.h>
22 #include <linux/input.h>
23 #include <linux/gpio.h>
25 #include <asm/mach/arch.h>
26 #include <asm/mach/map.h>
27 #include <asm/setup.h>
28 #include <asm/mach-types.h>
31 #include <mach/regs-clock.h>
32 #include <mach/regs-fb.h>
34 #include <plat/gpio-cfg.h>
35 #include <plat/regs-serial.h>
36 #include <plat/s5pv210.h>
37 #include <plat/devs.h>
40 #include <plat/fimc-core.h>
41 #include <plat/sdhci.h>
43 /* Following are default values for UCON, ULCON and UFCON UART registers */
44 #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
45 S3C2410_UCON_RXILEVEL | \
46 S3C2410_UCON_TXIRQMODE | \
47 S3C2410_UCON_RXIRQMODE | \
48 S3C2410_UCON_RXFIFO_TOI | \
49 S3C2443_UCON_RXERR_IRQEN)
51 #define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
53 #define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
55 static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
59 .ucon = AQUILA_UCON_DEFAULT,
60 .ulcon = AQUILA_ULCON_DEFAULT,
62 * Actually UART0 can support 256 bytes fifo, but aquila board
63 * supports 128 bytes fifo because of initial chip bug
65 .ufcon = AQUILA_UFCON_DEFAULT |
66 S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
71 .ucon = AQUILA_UCON_DEFAULT,
72 .ulcon = AQUILA_ULCON_DEFAULT,
73 .ufcon = AQUILA_UFCON_DEFAULT |
74 S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
79 .ucon = AQUILA_UCON_DEFAULT,
80 .ulcon = AQUILA_ULCON_DEFAULT,
81 .ufcon = AQUILA_UFCON_DEFAULT |
82 S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
87 .ucon = AQUILA_UCON_DEFAULT,
88 .ulcon = AQUILA_ULCON_DEFAULT,
89 .ufcon = AQUILA_UFCON_DEFAULT |
90 S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
95 static struct s3c_fb_pd_win aquila_fb_win0 = {
110 static struct s3c_fb_pd_win aquila_fb_win1 = {
125 static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
126 .win[0] = &aquila_fb_win0,
127 .win[1] = &aquila_fb_win1,
128 .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
129 .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
130 VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
131 .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
134 /* MAX8998 regulators */
135 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
137 static struct regulator_init_data aquila_ldo2_data = {
139 .name = "VALIVE_1.1V",
150 static struct regulator_init_data aquila_ldo3_data = {
152 .name = "VUSB/MIPI_1.1V",
160 static struct regulator_init_data aquila_ldo4_data = {
169 static struct regulator_init_data aquila_ldo5_data = {
178 static struct regulator_init_data aquila_ldo6_data = {
187 static struct regulator_init_data aquila_ldo7_data = {
198 static struct regulator_init_data aquila_ldo8_data = {
200 .name = "VUSB/VADC_3.3V",
208 static struct regulator_init_data aquila_ldo9_data = {
210 .name = "VCC/VCAM_2.8V",
218 static struct regulator_init_data aquila_ldo10_data = {
228 static struct regulator_init_data aquila_ldo11_data = {
230 .name = "CAM_IO_2.8V",
238 static struct regulator_init_data aquila_ldo12_data = {
240 .name = "CAM_ISP_1.2V",
248 static struct regulator_init_data aquila_ldo13_data = {
250 .name = "CAM_A_2.8V",
258 static struct regulator_init_data aquila_ldo14_data = {
260 .name = "CAM_CIF_1.8V",
268 static struct regulator_init_data aquila_ldo15_data = {
270 .name = "CAM_AF_3.3V",
278 static struct regulator_init_data aquila_ldo16_data = {
280 .name = "VMIPI_1.8V",
288 static struct regulator_init_data aquila_ldo17_data = {
290 .name = "CAM_8M_1.8V",
299 static struct regulator_consumer_supply buck1_consumer[] = {
300 { .supply = "vddarm", },
303 static struct regulator_consumer_supply buck2_consumer[] = {
304 { .supply = "vddint", },
307 static struct regulator_init_data aquila_buck1_data = {
313 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
314 REGULATOR_CHANGE_STATUS,
316 .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
317 .consumer_supplies = buck1_consumer,
320 static struct regulator_init_data aquila_buck2_data = {
326 .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
327 REGULATOR_CHANGE_STATUS,
329 .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
330 .consumer_supplies = buck2_consumer,
333 static struct regulator_init_data aquila_buck3_data = {
345 static struct regulator_init_data aquila_buck4_data = {
347 .name = "CAM_CORE_1.2V",
355 static struct max8998_regulator_data aquila_regulators[] = {
356 { MAX8998_LDO2, &aquila_ldo2_data },
357 { MAX8998_LDO3, &aquila_ldo3_data },
358 { MAX8998_LDO4, &aquila_ldo4_data },
359 { MAX8998_LDO5, &aquila_ldo5_data },
360 { MAX8998_LDO6, &aquila_ldo6_data },
361 { MAX8998_LDO7, &aquila_ldo7_data },
362 { MAX8998_LDO8, &aquila_ldo8_data },
363 { MAX8998_LDO9, &aquila_ldo9_data },
364 { MAX8998_LDO10, &aquila_ldo10_data },
365 { MAX8998_LDO11, &aquila_ldo11_data },
366 { MAX8998_LDO12, &aquila_ldo12_data },
367 { MAX8998_LDO13, &aquila_ldo13_data },
368 { MAX8998_LDO14, &aquila_ldo14_data },
369 { MAX8998_LDO15, &aquila_ldo15_data },
370 { MAX8998_LDO16, &aquila_ldo16_data },
371 { MAX8998_LDO17, &aquila_ldo17_data },
372 { MAX8998_BUCK1, &aquila_buck1_data },
373 { MAX8998_BUCK2, &aquila_buck2_data },
374 { MAX8998_BUCK3, &aquila_buck3_data },
375 { MAX8998_BUCK4, &aquila_buck4_data },
378 static struct max8998_platform_data aquila_max8998_pdata = {
379 .num_regulators = ARRAY_SIZE(aquila_regulators),
380 .regulators = aquila_regulators,
381 .buck1_set1 = S5PV210_GPH0(3),
382 .buck1_set2 = S5PV210_GPH0(4),
383 .buck2_set3 = S5PV210_GPH0(5),
384 .buck1_max_voltage1 = 1200000,
385 .buck1_max_voltage2 = 1200000,
386 .buck2_max_voltage = 1200000,
390 static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
392 .dev_name = "5-001a",
395 .dev_name = "5-001a",
398 .dev_name = "5-001a",
403 static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
405 .dev_name = "5-001a",
408 .dev_name = "5-001a",
413 static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
417 .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
418 .consumer_supplies = wm8994_fixed_voltage0_supplies,
421 static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
425 .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
426 .consumer_supplies = wm8994_fixed_voltage1_supplies,
429 static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
430 .supply_name = "VCC_1.8V_PDA",
431 .microvolts = 1800000,
433 .init_data = &wm8994_fixed_voltage0_init_data,
436 static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
437 .supply_name = "V_BAT",
438 .microvolts = 3700000,
440 .init_data = &wm8994_fixed_voltage1_init_data,
443 static struct platform_device wm8994_fixed_voltage0 = {
444 .name = "reg-fixed-voltage",
447 .platform_data = &wm8994_fixed_voltage0_config,
451 static struct platform_device wm8994_fixed_voltage1 = {
452 .name = "reg-fixed-voltage",
455 .platform_data = &wm8994_fixed_voltage1_config,
459 static struct regulator_consumer_supply wm8994_avdd1_supply = {
460 .dev_name = "5-001a",
464 static struct regulator_consumer_supply wm8994_dcvdd_supply = {
465 .dev_name = "5-001a",
469 static struct regulator_init_data wm8994_ldo1_data = {
471 .name = "AVDD1_3.0V",
472 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
474 .num_consumer_supplies = 1,
475 .consumer_supplies = &wm8994_avdd1_supply,
478 static struct regulator_init_data wm8994_ldo2_data = {
480 .name = "DCVDD_1.0V",
482 .num_consumer_supplies = 1,
483 .consumer_supplies = &wm8994_dcvdd_supply,
486 static struct wm8994_pdata wm8994_platform_data = {
487 /* configure gpio1 function: 0x0001(Logic level input/output) */
488 .gpio_defaults[0] = 0x0001,
489 /* configure gpio3/4/5/7 function for AIF2 voice */
490 .gpio_defaults[2] = 0x8100,
491 .gpio_defaults[3] = 0x8100,
492 .gpio_defaults[4] = 0x8100,
493 .gpio_defaults[6] = 0x0100,
494 /* configure gpio8/9/10/11 function for AIF3 BT */
495 .gpio_defaults[7] = 0x8100,
496 .gpio_defaults[8] = 0x0100,
497 .gpio_defaults[9] = 0x0100,
498 .gpio_defaults[10] = 0x0100,
499 .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
500 .ldo[1] = { 0, NULL, &wm8994_ldo2_data },
504 #define AP_I2C_GPIO_PMIC_BUS_4 4
505 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
506 .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
507 .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
510 static struct platform_device aquila_i2c_gpio_pmic = {
512 .id = AP_I2C_GPIO_PMIC_BUS_4,
514 .platform_data = &aquila_i2c_gpio_pmic_data,
518 static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
519 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
521 /* 0xCC when SRAD = 0 */
522 I2C_BOARD_INFO("max8998", 0xCC >> 1),
523 .platform_data = &aquila_max8998_pdata,
528 /* GPIO I2C AP 1.8V */
529 #define AP_I2C_GPIO_BUS_5 5
530 static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
531 .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
532 .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
535 static struct platform_device aquila_i2c_gpio5 = {
537 .id = AP_I2C_GPIO_BUS_5,
539 .platform_data = &aquila_i2c_gpio5_data,
543 static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
545 /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
546 I2C_BOARD_INFO("wm8994", 0x1a),
547 .platform_data = &wm8994_platform_data,
551 /* PMIC Power button */
552 static struct gpio_keys_button aquila_gpio_keys_table[] = {
555 .gpio = S5PV210_GPH2(6),
556 .desc = "gpio-keys: KEY_POWER",
560 .debounce_interval = 1,
564 static struct gpio_keys_platform_data aquila_gpio_keys_data = {
565 .buttons = aquila_gpio_keys_table,
566 .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
569 static struct platform_device aquila_device_gpiokeys = {
572 .platform_data = &aquila_gpio_keys_data,
576 static void __init aquila_pmic_init(void)
578 /* AP_PMIC_IRQ: EINT7 */
579 s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
580 s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
583 s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
584 s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
588 static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
590 .cd_type = S3C_SDHCI_CD_PERMANENT,
594 static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
596 .cd_type = S3C_SDHCI_CD_EXTERNAL,
597 /* ext_cd_{init,cleanup} callbacks will be added later */
601 #define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
602 #define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
603 static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
605 .cd_type = S3C_SDHCI_CD_GPIO,
606 .ext_cd_gpio = AQUILA_EXT_FLASH_CD,
607 .ext_cd_gpio_invert = 1,
610 static void aquila_setup_sdhci(void)
612 gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
613 gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
615 s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
616 s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
617 s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
620 static struct platform_device *aquila_devices[] __initdata = {
621 &aquila_i2c_gpio_pmic,
623 &aquila_device_gpiokeys,
632 &s5pv210_device_iis0,
633 &wm8994_fixed_voltage0,
634 &wm8994_fixed_voltage1,
637 static void __init aquila_sound_init(void)
643 * The Aquila board have a oscillator which provide main clock
644 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
645 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
647 gpio = S5PV210_GPH3(2); /* XEINT_26 */
648 gpio_request(gpio, "CODEC_XTAL_EN");
649 s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
650 s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
652 /* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
653 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
654 * because it needs 24MHz clock to operate WM8994 codec.
656 __raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
659 static void __init aquila_map_io(void)
661 s5p_init_io(NULL, 0, S5P_VA_CHIPID);
662 s3c24xx_init_clocks(24000000);
663 s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
666 static void __init aquila_machine_init(void)
670 i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
671 ARRAY_SIZE(i2c_gpio_pmic_devs));
673 aquila_setup_sdhci();
675 s3c_fimc_setname(0, "s5p-fimc");
676 s3c_fimc_setname(1, "s5p-fimc");
677 s3c_fimc_setname(2, "s5p-fimc");
681 i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
682 ARRAY_SIZE(i2c_gpio5_devs));
685 s3c_fb_set_platdata(&aquila_lcd_pdata);
687 platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
690 MACHINE_START(AQUILA, "Aquila")
692 Marek Szyprowski <m.szyprowski@samsung.com>
693 Kyungmin Park <kyungmin.park@samsung.com> */
694 .boot_params = S5P_PA_SDRAM + 0x100,
695 .init_irq = s5pv210_init_irq,
696 .map_io = aquila_map_io,
697 .init_machine = aquila_machine_init,
698 .timer = &s3c24xx_timer,