3 * arch/arm/mach-u300/clock.c
6 * Copyright (C) 2007-2009 ST-Ericsson AB
7 * License terms: GNU General Public License (GPL) version 2
8 * Define clocks in the app platform.
9 * Author: Linus Walleij <linus.walleij@stericsson.com>
10 * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/list.h>
16 #include <linux/errno.h>
17 #include <linux/err.h>
18 #include <linux/string.h>
19 #include <linux/clk.h>
20 #include <linux/mutex.h>
21 #include <linux/spinlock.h>
22 #include <linux/debugfs.h>
23 #include <linux/device.h>
24 #include <linux/init.h>
25 #include <linux/timer.h>
27 #include <linux/seq_file.h>
29 #include <asm/clkdev.h>
30 #include <mach/hardware.h>
31 #include <mach/syscon.h>
37 * - move all handling of the CCR register into this file and create
38 * a spinlock for the CCR register
39 * - switch to the clkdevice lookup mechanism that maps clocks to
40 * device ID:s instead when it becomes available in kernel 2.6.29.
41 * - implement rate get/set for all clocks that need it.
45 * Syscon clock I/O registers lock so clock requests don't collide
46 * NOTE: this is a local lock only used to lock access to clock and
47 * reset registers in syscon.
49 static DEFINE_SPINLOCK(syscon_clkreg_lock);
50 static DEFINE_SPINLOCK(syscon_resetreg_lock);
53 * The clocking hierarchy currently looks like this.
54 * NOTE: the idea is NOT to show how the clocks are routed on the chip!
55 * The ideas is to show dependencies, so a clock higher up in the
56 * hierarchy has to be on in order for another clock to be on. Now,
57 * both CPU and DMA can actually be on top of the hierarchy, and that
58 * is not modeled currently. Instead we have the backbone AMBA bus on
59 * top. This bus cannot be programmed in any way but conceptually it
60 * needs to be active for the bridges and devices to transport data.
62 * Please be aware that a few clocks are hw controlled, which mean that
63 * the hw itself can turn on/off or change the rate of the clock when
69 * +- NANDIF NAND Flash interface
70 * +- SEMI Shared Memory interface
71 * +- ISP Image Signal Processor (U335 only)
73 * +- DMA Direct Memory Access Controller
74 * +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
76 * +- VIDEO_ENC AVE2/3 Video Encoder
77 * +- XGAM Graphics Accelerator Controller
82 * | +- ahb:1 INTCON Interrupt controller
83 * | +- ahb:3 MSPRO Memory Stick Pro controller
84 * | +- ahb:4 EMIF External Memory interface
86 * +- fast:0 FAST bridge
88 * | +- fast:1 MMCSD MMC/SD card reader controller
89 * | +- fast:2 I2S0 PCM I2S channel 0 controller
90 * | +- fast:3 I2S1 PCM I2S channel 1 controller
91 * | +- fast:4 I2C0 I2C channel 0 controller
92 * | +- fast:5 I2C1 I2C channel 1 controller
93 * | +- fast:6 SPI SPI controller
94 * | +- fast:7 UART1 Secondary UART (U335 only)
96 * +- slow:0 SLOW bridge
98 * +- slow:1 SYSCON (not possible to control)
99 * +- slow:2 WDOG Watchdog
100 * +- slow:3 UART0 primary UART
101 * +- slow:4 TIMER_APP Application timer - used in Linux
102 * +- slow:5 KEYPAD controller
103 * +- slow:6 GPIO controller
104 * +- slow:7 RTC controller
105 * +- slow:8 BT Bus Tracer (not used currently)
106 * +- slow:9 EH Event Handler (not used currently)
107 * +- slow:a TIMER_ACC Access style timer (not used currently)
108 * +- slow:b PPM (U335 only, what is that?)
112 * Reset control functions. We remember if a block has been
113 * taken out of reset and don't remove the reset assertion again
114 * and vice versa. Currently we only remove resets so the
115 * enablement function is defined out.
117 static void syscon_block_reset_enable(struct clk *clk)
120 unsigned long iflags;
122 /* Not all blocks support resetting */
123 if (!clk->res_reg || !clk->res_mask)
125 spin_lock_irqsave(&syscon_resetreg_lock, iflags);
126 val = readw(clk->res_reg);
127 val |= clk->res_mask;
128 writew(val, clk->res_reg);
129 spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
133 static void syscon_block_reset_disable(struct clk *clk)
136 unsigned long iflags;
138 /* Not all blocks support resetting */
139 if (!clk->res_reg || !clk->res_mask)
141 spin_lock_irqsave(&syscon_resetreg_lock, iflags);
142 val = readw(clk->res_reg);
143 val &= ~clk->res_mask;
144 writew(val, clk->res_reg);
145 spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
149 int __clk_get(struct clk *clk)
153 /* The MMC and MSPRO clocks need some special set-up */
154 if (!strcmp(clk->name, "MCLK")) {
155 /* Set default MMC clock divisor to 18.9 MHz */
156 writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
157 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
158 /* Disable the MMC feedback clock */
159 val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
160 /* Disable MSPRO frequency */
161 val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
162 writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
164 if (!strcmp(clk->name, "MSPRO")) {
165 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
166 /* Disable the MMC feedback clock */
167 val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
168 /* Enable MSPRO frequency */
169 val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
170 writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
174 EXPORT_SYMBOL(__clk_get);
176 void __clk_put(struct clk *clk)
179 EXPORT_SYMBOL(__clk_put);
181 static void syscon_clk_disable(struct clk *clk)
183 unsigned long iflags;
185 /* Don't touch the hardware controlled clocks */
189 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
190 writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
191 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
194 static void syscon_clk_enable(struct clk *clk)
196 unsigned long iflags;
198 /* Don't touch the hardware controlled clocks */
202 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
203 writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
204 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
207 static u16 syscon_clk_get_rate(void)
210 unsigned long iflags;
212 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
213 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
214 val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
215 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
219 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
220 static void enable_i2s0_vcxo(void)
223 unsigned long iflags;
225 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
226 /* Set I2S0 to use the VCXO 26 MHz clock */
227 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
228 val |= U300_SYSCON_CCR_TURN_VCXO_ON;
229 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
230 val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
231 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
232 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
233 val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
234 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
235 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
238 static void enable_i2s1_vcxo(void)
241 unsigned long iflags;
243 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
244 /* Set I2S1 to use the VCXO 26 MHz clock */
245 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
246 val |= U300_SYSCON_CCR_TURN_VCXO_ON;
247 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
248 val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
249 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
250 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
251 val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
252 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
253 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
256 static void disable_i2s0_vcxo(void)
259 unsigned long iflags;
261 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
262 /* Disable I2S0 use of the VCXO 26 MHz clock */
263 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
264 val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
265 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
266 /* Deactivate VCXO if noone else is using VCXO */
267 if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
268 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
269 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
270 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
271 val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
272 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
273 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
276 static void disable_i2s1_vcxo(void)
279 unsigned long iflags;
281 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
282 /* Disable I2S1 use of the VCXO 26 MHz clock */
283 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
284 val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
285 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
286 /* Deactivate VCXO if noone else is using VCXO */
287 if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
288 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
289 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
290 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
291 val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
292 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
293 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
295 #endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
298 static void syscon_clk_rate_set_mclk(unsigned long rate)
302 unsigned long iflags;
333 printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
338 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
339 reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
340 ~U300_SYSCON_MMF0R_MASK;
341 writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
342 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
345 void syscon_clk_rate_set_cpuclk(unsigned long rate)
348 unsigned long iflags;
352 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
355 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
358 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
361 val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
366 spin_lock_irqsave(&syscon_clkreg_lock, iflags);
367 val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
368 ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
369 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
370 spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
372 EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
374 void clk_disable(struct clk *clk)
376 unsigned long iflags;
378 spin_lock_irqsave(&clk->lock, iflags);
379 if (clk->usecount > 0 && !(--clk->usecount)) {
380 /* some blocks lack clocking registers and cannot be disabled */
383 if (likely((u32)clk->parent))
384 clk_disable(clk->parent);
386 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
387 if (unlikely(!strcmp(clk->name, "I2S0")))
389 if (unlikely(!strcmp(clk->name, "I2S1")))
392 spin_unlock_irqrestore(&clk->lock, iflags);
394 EXPORT_SYMBOL(clk_disable);
396 int clk_enable(struct clk *clk)
399 unsigned long iflags;
401 spin_lock_irqsave(&clk->lock, iflags);
402 if (clk->usecount++ == 0) {
403 if (likely((u32)clk->parent))
404 ret = clk_enable(clk->parent);
406 if (unlikely(ret != 0))
409 /* remove reset line (we never enable reset again) */
410 syscon_block_reset_disable(clk);
411 /* clocks without enable function are always on */
414 #ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
415 if (unlikely(!strcmp(clk->name, "I2S0")))
417 if (unlikely(!strcmp(clk->name, "I2S1")))
422 spin_unlock_irqrestore(&clk->lock, iflags);
426 EXPORT_SYMBOL(clk_enable);
428 /* Returns the clock rate in Hz */
429 static unsigned long clk_get_rate_cpuclk(struct clk *clk)
433 val = syscon_clk_get_rate();
436 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
437 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
439 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
441 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
443 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
451 static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
455 val = syscon_clk_get_rate();
458 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
459 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
461 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
463 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
464 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
473 static unsigned long clk_get_rate_emif_clk(struct clk *clk)
477 val = syscon_clk_get_rate();
480 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
481 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
483 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
485 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
486 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
495 static unsigned long clk_get_rate_xgamclk(struct clk *clk)
499 val = syscon_clk_get_rate();
502 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
503 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
505 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
507 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
508 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
517 static unsigned long clk_get_rate_mclk(struct clk *clk)
521 val = syscon_clk_get_rate();
524 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
526 * Here, the 208 MHz PLL gets shut down and the always
527 * on 13 MHz PLL used for RTC etc kicks into use
531 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
532 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
533 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
534 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
537 * This clock is under program control. The register is
538 * divided in two nybbles, bit 7-4 gives cycles-1 to count
539 * high, bit 3-0 gives cycles-1 to count low. Distribute
540 * these with no more than 1 cycle difference between
541 * low and high and add low and high to get the actual
542 * divisor. The base PLL is 208 MHz. Writing 0x00 will
543 * divide by 1 and 1 so the highest frequency possible
547 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
549 u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
550 U300_SYSCON_MMF0R_MASK;
581 static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
585 val = syscon_clk_get_rate();
588 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
589 case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
591 case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
592 case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
593 case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
602 unsigned long clk_get_rate(struct clk *clk)
605 return clk->get_rate(clk);
609 EXPORT_SYMBOL(clk_get_rate);
611 static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
613 if (rate <= 18900000)
615 if (rate <= 20800000)
617 if (rate <= 23100000)
619 if (rate <= 26000000)
621 if (rate <= 29700000)
623 if (rate <= 34700000)
625 if (rate <= 41600000)
627 if (rate <= 52000000)
632 static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
634 if (rate <= 13000000)
636 if (rate <= 52000000)
638 if (rate <= 104000000)
640 if (rate <= 208000000)
646 * This adjusts a requested rate to the closest exact rate
647 * a certain clock can provide. For a fixed clock it's
650 long clk_round_rate(struct clk *clk, unsigned long rate)
652 /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
653 /* Else default to fixed value */
655 if (clk->round_rate) {
656 return (long) clk->round_rate(clk, rate);
658 printk(KERN_ERR "clock: Failed to round rate of %s\n",
661 return (long) clk->rate;
663 EXPORT_SYMBOL(clk_round_rate);
665 static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
667 syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
671 static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
673 syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
677 int clk_set_rate(struct clk *clk, unsigned long rate)
679 /* TODO: set for EMIFCLK and AHBCLK */
680 /* Else assume the clock is fixed and fail */
682 return clk->set_rate(clk, rate);
684 printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
689 EXPORT_SYMBOL(clk_set_rate);
692 * Clock definitions. The clock parents are set to respective
693 * bridge and the clock framework makes sure that the clocks have
694 * parents activated and are brought out of reset when in use.
696 * Clocks that have hw_ctrld = true are hw controlled, and the hw
697 * can by itself turn these clocks on and off.
698 * So in other words, we don't really have to care about them.
701 static struct clk amba_clk = {
703 .rate = 52000000, /* this varies! */
706 .lock = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
710 * These blocks are connected directly to the AMBA bus
714 static struct clk cpu_clk = {
717 .rate = 208000000, /* this varies! */
720 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
721 .res_mask = U300_SYSCON_RRR_CPU_RESET_EN,
722 .set_rate = clk_set_rate_cpuclk,
723 .get_rate = clk_get_rate_cpuclk,
724 .round_rate = clk_round_rate_cpuclk,
725 .lock = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
728 static struct clk nandif_clk = {
733 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
734 .res_mask = U300_SYSCON_RRR_NANDIF_RESET_EN,
735 .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN,
736 .enable = syscon_clk_enable,
737 .disable = syscon_clk_disable,
738 .lock = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
741 static struct clk semi_clk = {
744 .rate = 0, /* FIXME */
745 /* It is not possible to reset SEMI */
748 .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN,
749 .enable = syscon_clk_enable,
750 .disable = syscon_clk_disable,
751 .lock = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
754 #ifdef CONFIG_MACH_U300_BS335
755 static struct clk isp_clk = {
758 .rate = 0, /* FIXME */
761 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
762 .res_mask = U300_SYSCON_RRR_ISP_RESET_EN,
763 .clk_val = U300_SYSCON_SBCER_ISP_CLK_EN,
764 .enable = syscon_clk_enable,
765 .disable = syscon_clk_disable,
766 .lock = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
769 static struct clk cds_clk = {
772 .rate = 0, /* FIXME */
775 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
776 .res_mask = U300_SYSCON_RRR_CDS_RESET_EN,
777 .clk_val = U300_SYSCON_SBCER_CDS_CLK_EN,
778 .enable = syscon_clk_enable,
779 .disable = syscon_clk_disable,
780 .lock = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
784 static struct clk dma_clk = {
787 .rate = 52000000, /* this varies! */
790 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
791 .res_mask = U300_SYSCON_RRR_DMAC_RESET_EN,
792 .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN,
793 .enable = syscon_clk_enable,
794 .disable = syscon_clk_disable,
795 .lock = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
798 static struct clk aaif_clk = {
801 .rate = 52000000, /* this varies! */
804 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
805 .res_mask = U300_SYSCON_RRR_AAIF_RESET_EN,
806 .clk_val = U300_SYSCON_SBCER_AAIF_CLK_EN,
807 .enable = syscon_clk_enable,
808 .disable = syscon_clk_disable,
809 .lock = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
812 static struct clk apex_clk = {
815 .rate = 0, /* FIXME */
818 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
819 .res_mask = U300_SYSCON_RRR_APEX_RESET_EN,
820 .clk_val = U300_SYSCON_SBCER_APEX_CLK_EN,
821 .enable = syscon_clk_enable,
822 .disable = syscon_clk_disable,
823 .lock = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
826 static struct clk video_enc_clk = {
829 .rate = 208000000, /* this varies! */
832 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
833 /* This has XGAM in the name but refers to the video encoder */
834 .res_mask = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
835 .clk_val = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
836 .enable = syscon_clk_enable,
837 .disable = syscon_clk_disable,
838 .lock = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
841 static struct clk xgam_clk = {
844 .rate = 52000000, /* this varies! */
847 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
848 .res_mask = U300_SYSCON_RRR_XGAM_RESET_EN,
849 .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN,
850 .get_rate = clk_get_rate_xgamclk,
851 .enable = syscon_clk_enable,
852 .disable = syscon_clk_disable,
853 .lock = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
856 /* This clock is used to activate the video encoder */
857 static struct clk ahb_clk = {
860 .rate = 52000000, /* this varies! */
861 .hw_ctrld = false, /* This one is set to false due to HW bug */
863 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
864 .res_mask = U300_SYSCON_RRR_AHB_RESET_EN,
865 .clk_val = U300_SYSCON_SBCER_AHB_CLK_EN,
866 .enable = syscon_clk_enable,
867 .disable = syscon_clk_disable,
868 .get_rate = clk_get_rate_ahb_clk,
869 .lock = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
874 * Clocks on the AHB bridge
877 static struct clk ahb_subsys_clk = {
878 .name = "AHB_SUBSYS",
880 .rate = 52000000, /* this varies! */
883 .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
884 .enable = syscon_clk_enable,
885 .disable = syscon_clk_disable,
886 .get_rate = clk_get_rate_ahb_clk,
887 .lock = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
890 static struct clk intcon_clk = {
892 .parent = &ahb_subsys_clk,
893 .rate = 52000000, /* this varies! */
896 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
897 .res_mask = U300_SYSCON_RRR_INTCON_RESET_EN,
898 /* INTCON can be reset but not clock-gated */
899 .lock = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
903 static struct clk mspro_clk = {
905 .parent = &ahb_subsys_clk,
906 .rate = 0, /* FIXME */
909 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
910 .res_mask = U300_SYSCON_RRR_MSPRO_RESET_EN,
911 .clk_val = U300_SYSCON_SBCER_MSPRO_CLK_EN,
912 .enable = syscon_clk_enable,
913 .disable = syscon_clk_disable,
914 .lock = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
917 static struct clk emif_clk = {
919 .parent = &ahb_subsys_clk,
920 .rate = 104000000, /* this varies! */
923 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RRR,
924 .res_mask = U300_SYSCON_RRR_EMIF_RESET_EN,
925 .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN,
926 .enable = syscon_clk_enable,
927 .disable = syscon_clk_disable,
928 .get_rate = clk_get_rate_emif_clk,
929 .lock = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
934 * Clocks on the FAST bridge
936 static struct clk fast_clk = {
937 .name = "FAST_BRIDGE",
939 .rate = 13000000, /* this varies! */
942 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
943 .res_mask = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
944 .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
945 .enable = syscon_clk_enable,
946 .disable = syscon_clk_disable,
947 .lock = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
950 static struct clk mmcsd_clk = {
953 .rate = 18900000, /* this varies! */
956 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
957 .res_mask = U300_SYSCON_RFR_MMC_RESET_ENABLE,
958 .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN,
959 .get_rate = clk_get_rate_mclk,
960 .set_rate = clk_set_rate_mclk,
961 .round_rate = clk_round_rate_mclk,
962 .disable = syscon_clk_disable,
963 .enable = syscon_clk_enable,
964 .lock = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
967 static struct clk i2s0_clk = {
970 .rate = 26000000, /* this varies! */
973 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
974 .res_mask = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
975 .clk_val = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
976 .enable = syscon_clk_enable,
977 .disable = syscon_clk_disable,
978 .get_rate = clk_get_rate_i2s_i2c_spi,
979 .lock = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
982 static struct clk i2s1_clk = {
985 .rate = 26000000, /* this varies! */
988 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
989 .res_mask = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
990 .clk_val = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
991 .enable = syscon_clk_enable,
992 .disable = syscon_clk_disable,
993 .get_rate = clk_get_rate_i2s_i2c_spi,
994 .lock = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
997 static struct clk i2c0_clk = {
1000 .rate = 26000000, /* this varies! */
1003 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1004 .res_mask = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
1005 .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN,
1006 .enable = syscon_clk_enable,
1007 .disable = syscon_clk_disable,
1008 .get_rate = clk_get_rate_i2s_i2c_spi,
1009 .lock = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
1012 static struct clk i2c1_clk = {
1014 .parent = &fast_clk,
1015 .rate = 26000000, /* this varies! */
1018 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1019 .res_mask = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
1020 .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN,
1021 .enable = syscon_clk_enable,
1022 .disable = syscon_clk_disable,
1023 .get_rate = clk_get_rate_i2s_i2c_spi,
1024 .lock = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
1027 static struct clk spi_clk = {
1029 .parent = &fast_clk,
1030 .rate = 26000000, /* this varies! */
1033 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1034 .res_mask = U300_SYSCON_RFR_SPI_RESET_ENABLE,
1035 .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN,
1036 .enable = syscon_clk_enable,
1037 .disable = syscon_clk_disable,
1038 .get_rate = clk_get_rate_i2s_i2c_spi,
1039 .lock = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
1042 #ifdef CONFIG_MACH_U300_BS335
1043 static struct clk uart1_clk = {
1045 .parent = &fast_clk,
1049 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RFR,
1050 .res_mask = U300_SYSCON_RFR_UART1_RESET_ENABLE,
1051 .clk_val = U300_SYSCON_SBCER_UART1_CLK_EN,
1052 .enable = syscon_clk_enable,
1053 .disable = syscon_clk_disable,
1054 .lock = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
1060 * Clocks on the SLOW bridge
1062 static struct clk slow_clk = {
1063 .name = "SLOW_BRIDGE",
1064 .parent = &amba_clk,
1068 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1069 .res_mask = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
1070 .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
1071 .enable = syscon_clk_enable,
1072 .disable = syscon_clk_disable,
1073 .lock = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
1076 /* TODO: implement SYSCON clock? */
1078 static struct clk wdog_clk = {
1080 .parent = &slow_clk,
1084 /* This is always on, cannot be enabled/disabled or reset */
1085 .lock = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
1088 /* This one is hardwired to PLL13 */
1089 static struct clk uart_clk = {
1091 .parent = &slow_clk,
1095 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1096 .res_mask = U300_SYSCON_RSR_UART_RESET_EN,
1097 .clk_val = U300_SYSCON_SBCER_UART_CLK_EN,
1098 .enable = syscon_clk_enable,
1099 .disable = syscon_clk_disable,
1100 .lock = __SPIN_LOCK_UNLOCKED(uart_clk.lock),
1103 static struct clk keypad_clk = {
1105 .parent = &slow_clk,
1109 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1110 .res_mask = U300_SYSCON_RSR_KEYPAD_RESET_EN,
1111 .clk_val = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
1112 .enable = syscon_clk_enable,
1113 .disable = syscon_clk_disable,
1114 .lock = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
1117 static struct clk gpio_clk = {
1119 .parent = &slow_clk,
1123 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1124 .res_mask = U300_SYSCON_RSR_GPIO_RESET_EN,
1125 .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN,
1126 .enable = syscon_clk_enable,
1127 .disable = syscon_clk_disable,
1128 .lock = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
1131 static struct clk rtc_clk = {
1133 .parent = &slow_clk,
1137 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1138 .res_mask = U300_SYSCON_RSR_RTC_RESET_EN,
1139 /* This clock is always on, cannot be enabled/disabled */
1140 .lock = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
1143 static struct clk bustr_clk = {
1145 .parent = &slow_clk,
1149 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1150 .res_mask = U300_SYSCON_RSR_BTR_RESET_EN,
1151 .clk_val = U300_SYSCON_SBCER_BTR_CLK_EN,
1152 .enable = syscon_clk_enable,
1153 .disable = syscon_clk_disable,
1154 .lock = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
1157 static struct clk evhist_clk = {
1159 .parent = &slow_clk,
1163 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1164 .res_mask = U300_SYSCON_RSR_EH_RESET_EN,
1165 .clk_val = U300_SYSCON_SBCER_EH_CLK_EN,
1166 .enable = syscon_clk_enable,
1167 .disable = syscon_clk_disable,
1168 .lock = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
1171 static struct clk timer_clk = {
1173 .parent = &slow_clk,
1177 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1178 .res_mask = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
1179 .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
1180 .enable = syscon_clk_enable,
1181 .disable = syscon_clk_disable,
1182 .lock = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
1185 static struct clk app_timer_clk = {
1186 .name = "TIMER_APP",
1187 .parent = &slow_clk,
1191 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1192 .res_mask = U300_SYSCON_RSR_APP_TMR_RESET_EN,
1193 .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
1194 .enable = syscon_clk_enable,
1195 .disable = syscon_clk_disable,
1196 .lock = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
1199 #ifdef CONFIG_MACH_U300_BS335
1200 static struct clk ppm_clk = {
1202 .parent = &slow_clk,
1203 .rate = 0, /* FIXME */
1204 .hw_ctrld = true, /* TODO: Look up if it is hw ctrld or not */
1206 .res_reg = U300_SYSCON_VBASE + U300_SYSCON_RSR,
1207 .res_mask = U300_SYSCON_RSR_PPM_RESET_EN,
1208 .clk_val = U300_SYSCON_SBCER_PPM_CLK_EN,
1209 .enable = syscon_clk_enable,
1210 .disable = syscon_clk_disable,
1211 .lock = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
1215 #define DEF_LOOKUP(devid, clkref) \
1222 * Here we only define clocks that are meaningful to
1223 * look up through clockdevice.
1225 static struct clk_lookup lookups[] = {
1226 /* Connected directly to the AMBA bus */
1227 DEF_LOOKUP("amba", &amba_clk),
1228 DEF_LOOKUP("cpu", &cpu_clk),
1229 DEF_LOOKUP("fsmc", &nandif_clk),
1230 DEF_LOOKUP("semi", &semi_clk),
1231 #ifdef CONFIG_MACH_U300_BS335
1232 DEF_LOOKUP("isp", &isp_clk),
1233 DEF_LOOKUP("cds", &cds_clk),
1235 DEF_LOOKUP("dma", &dma_clk),
1236 DEF_LOOKUP("msl", &aaif_clk),
1237 DEF_LOOKUP("apex", &apex_clk),
1238 DEF_LOOKUP("video_enc", &video_enc_clk),
1239 DEF_LOOKUP("xgam", &xgam_clk),
1240 DEF_LOOKUP("ahb", &ahb_clk),
1241 /* AHB bridge clocks */
1242 DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
1243 DEF_LOOKUP("intcon", &intcon_clk),
1244 DEF_LOOKUP("mspro", &mspro_clk),
1245 DEF_LOOKUP("pl172", &emif_clk),
1246 /* FAST bridge clocks */
1247 DEF_LOOKUP("fast", &fast_clk),
1248 DEF_LOOKUP("mmci", &mmcsd_clk),
1250 * The .0 and .1 identifiers on these comes from the platform device
1251 * .id field and are assigned when the platform devices are registered.
1253 DEF_LOOKUP("i2s.0", &i2s0_clk),
1254 DEF_LOOKUP("i2s.1", &i2s1_clk),
1255 DEF_LOOKUP("stu300.0", &i2c0_clk),
1256 DEF_LOOKUP("stu300.1", &i2c1_clk),
1257 DEF_LOOKUP("pl022", &spi_clk),
1258 #ifdef CONFIG_MACH_U300_BS335
1259 DEF_LOOKUP("uart1", &uart1_clk),
1261 /* SLOW bridge clocks */
1262 DEF_LOOKUP("slow", &slow_clk),
1263 DEF_LOOKUP("coh901327_wdog", &wdog_clk),
1264 DEF_LOOKUP("uart0", &uart_clk),
1265 DEF_LOOKUP("apptimer", &app_timer_clk),
1266 DEF_LOOKUP("coh901461-keypad", &keypad_clk),
1267 DEF_LOOKUP("u300-gpio", &gpio_clk),
1268 DEF_LOOKUP("rtc-coh901331", &rtc_clk),
1269 DEF_LOOKUP("bustr", &bustr_clk),
1270 DEF_LOOKUP("evhist", &evhist_clk),
1271 DEF_LOOKUP("timer", &timer_clk),
1272 #ifdef CONFIG_MACH_U300_BS335
1273 DEF_LOOKUP("ppm", &ppm_clk),
1277 static void __init clk_register(void)
1281 /* Register the lookups */
1282 for (i = 0; i < ARRAY_SIZE(lookups); i++)
1283 clkdev_add(&lookups[i]);
1287 * These are the clocks for cells registered as primecell drivers
1288 * on the AMBA bus. These must be on during AMBA device registration
1289 * since the bus probe will attempt to read magic configuration
1290 * registers for these devices. If they are deactivated these probes
1294 * Please note that on emif, both RAM and NAND is connected in dual
1295 * RAM phones. On single RAM phones, ram is on semi and NAND on emif.
1298 void u300_clock_primecells(void)
1300 clk_enable(&intcon_clk);
1301 clk_enable(&uart_clk);
1302 #ifdef CONFIG_MACH_U300_BS335
1303 clk_enable(&uart1_clk);
1305 clk_enable(&spi_clk);
1307 clk_enable(&mmcsd_clk);
1310 EXPORT_SYMBOL(u300_clock_primecells);
1312 void u300_unclock_primecells(void)
1315 clk_disable(&intcon_clk);
1316 clk_disable(&uart_clk);
1317 #ifdef CONFIG_MACH_U300_BS335
1318 clk_disable(&uart1_clk);
1320 clk_disable(&spi_clk);
1321 clk_disable(&mmcsd_clk);
1324 EXPORT_SYMBOL(u300_unclock_primecells);
1327 * The interrupt controller is enabled before the clock API is registered.
1329 void u300_enable_intcon_clock(void)
1331 clk_enable(&intcon_clk);
1333 EXPORT_SYMBOL(u300_enable_intcon_clock);
1336 * The timer is enabled before the clock API is registered.
1338 void u300_enable_timer_clock(void)
1340 clk_enable(&app_timer_clk);
1342 EXPORT_SYMBOL(u300_enable_timer_clock);
1344 #if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
1346 * The following makes it possible to view the status (especially
1347 * reference count and reset status) for the clocks in the platform
1348 * by looking into the special file <debugfs>/u300_clocks
1351 /* A list of all clocks in the platform */
1352 static struct clk *clks[] = {
1353 /* Top node clock for the AMBA bus */
1355 /* Connected directly to the AMBA bus */
1359 #ifdef CONFIG_MACH_U300_BS335
1370 /* AHB bridge clocks */
1375 /* FAST bridge clocks */
1383 #ifdef CONFIG_MACH_U300_BS335
1386 /* SLOW bridge clocks */
1397 #ifdef CONFIG_MACH_U300_BS335
1402 static int u300_clocks_show(struct seq_file *s, void *data)
1407 seq_printf(s, "CLOCK DEVICE RESET STATE\t" \
1408 "ACTIVE\tUSERS\tHW CTRL FREQ\n");
1409 seq_printf(s, "---------------------------------------------" \
1410 "-----------------------------------------\n");
1411 for (i = 0; i < ARRAY_SIZE(clks); i++) {
1413 if (clk != ERR_PTR(-ENOENT)) {
1414 /* Format clock and device name nicely */
1418 chars = snprintf(&cdp[0], 17, "%s", clk->name);
1419 while (chars < 16) {
1423 chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
1424 dev_name(clk->dev) : "N/A");
1425 while (chars < 16) {
1426 cdp[chars+16] = ' ';
1432 "%s%s\t%s\t%d\t%s\t%lu Hz\n",
1435 "ASSERTED" : "RELEASED",
1436 clk->usecount ? "ON" : "OFF",
1438 clk->hw_ctrld ? "YES" : "NO ",
1439 clk->get_rate(clk));
1442 "%s%s\t%s\t%d\t%s\t" \
1446 "ASSERTED" : "RELEASED",
1447 clk->usecount ? "ON" : "OFF",
1449 clk->hw_ctrld ? "YES" : "NO ");
1455 static int u300_clocks_open(struct inode *inode, struct file *file)
1457 return single_open(file, u300_clocks_show, NULL);
1460 static const struct file_operations u300_clocks_operations = {
1461 .open = u300_clocks_open,
1463 .llseek = seq_lseek,
1464 .release = single_release,
1467 static int __init init_clk_read_debugfs(void)
1469 /* Expose a simple debugfs interface to view all clocks */
1470 (void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
1472 &u300_clocks_operations);
1476 * This needs to come in after the core_initcall() for the
1477 * overall clocks, because debugfs is not available until
1478 * the subsystems come up.
1480 module_init(init_clk_read_debugfs);
1483 static int __init u300_clock_init(void)
1488 * FIXME: shall all this powermanagement stuff really live here???
1491 /* Set system to run at PLL208, max performance, a known state. */
1492 val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
1493 val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
1494 writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
1495 /* Wait for the PLL208 to lock if not locked in yet */
1496 while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
1497 U300_SYSCON_CSR_PLL208_LOCK_IND));
1499 /* Power management enable */
1500 val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
1501 val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
1502 writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
1507 * Some of these may be on when we boot the system so make sure they
1510 syscon_block_reset_enable(&timer_clk);
1511 timer_clk.disable(&timer_clk);
1514 * These shall be turned on by default when we boot the system
1515 * so make sure they are ON. (Adding CPU here is a bit too much.)
1516 * These clocks will be claimed by drivers later.
1518 syscon_block_reset_disable(&semi_clk);
1519 syscon_block_reset_disable(&emif_clk);
1520 semi_clk.enable(&semi_clk);
1521 emif_clk.enable(&emif_clk);
1525 /* initialize clocking early to be available later in the boot */
1526 core_initcall(u300_clock_init);