4 /* should be set by the platform code */
5 extern void __iomem *mtu_base;
8 * The MTU device hosts four different counters, with 4 set of
9 * registers. These are register names.
12 #define MTU_IMSC 0x00 /* Interrupt mask set/clear */
13 #define MTU_RIS 0x04 /* Raw interrupt status */
14 #define MTU_MIS 0x08 /* Masked interrupt status */
15 #define MTU_ICR 0x0C /* Interrupt clear register */
17 /* per-timer registers take 0..3 as argument */
18 #define MTU_LR(x) (0x10 + 0x10 * (x) + 0x00) /* Load value */
19 #define MTU_VAL(x) (0x10 + 0x10 * (x) + 0x04) /* Current value */
20 #define MTU_CR(x) (0x10 + 0x10 * (x) + 0x08) /* Control reg */
21 #define MTU_BGLR(x) (0x10 + 0x10 * (x) + 0x0c) /* At next overflow */
23 /* bits for the control register */
24 #define MTU_CRn_ENA 0x80
25 #define MTU_CRn_PERIODIC 0x40 /* if 0 = free-running */
26 #define MTU_CRn_PRESCALE_MASK 0x0c
27 #define MTU_CRn_PRESCALE_1 0x00
28 #define MTU_CRn_PRESCALE_16 0x04
29 #define MTU_CRn_PRESCALE_256 0x08
30 #define MTU_CRn_32BITS 0x02
31 #define MTU_CRn_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR*/
33 /* Other registers are usual amba/primecell registers, currently not used */
34 #define MTU_ITCR 0xff0
35 #define MTU_ITOP 0xff4
37 #define MTU_PERIPH_ID0 0xfe0
38 #define MTU_PERIPH_ID1 0xfe4
39 #define MTU_PERIPH_ID2 0xfe8
40 #define MTU_PERIPH_ID3 0xfeC
42 #define MTU_PCELL0 0xff0
43 #define MTU_PCELL1 0xff4
44 #define MTU_PCELL2 0xff8
45 #define MTU_PCELL3 0xffC
47 #endif /* __PLAT_MTU_H */