2 * linux/arch/arm/plat-omap/dma.c
4 * Copyright (C) 2003 - 2008 Nokia Corporation
5 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
6 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
7 * Graphics DMA and LCD DMA graphics tranformations
8 * by Imre Deak <imre.deak@nokia.com>
9 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
10 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
11 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
13 * Copyright (C) 2009 Texas Instruments
14 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
16 * Support functions for the OMAP internal DMA channels.
18 * This program is free software; you can redistribute it and/or modify
19 * it under the terms of the GNU General Public License version 2 as
20 * published by the Free Software Foundation.
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/sched.h>
27 #include <linux/spinlock.h>
28 #include <linux/errno.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
33 #include <asm/system.h>
34 #include <mach/hardware.h>
41 #ifndef CONFIG_ARCH_OMAP1
42 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
43 DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
46 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
49 #define OMAP_DMA_ACTIVE 0x01
50 #define OMAP_DMA_CCR_EN (1 << 7)
51 #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe
53 #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
55 static int enable_1510_mode;
63 void (*callback)(int lch, u16 ch_status, void *data);
66 #ifndef CONFIG_ARCH_OMAP1
67 /* required for Dynamic chaining */
78 struct dma_link_info {
80 int no_of_lchs_linked;
91 static struct dma_link_info *dma_linked_lch;
93 #ifndef CONFIG_ARCH_OMAP1
95 /* Chain handling macros */
96 #define OMAP_DMA_CHAIN_QINIT(chain_id) \
98 dma_linked_lch[chain_id].q_head = \
99 dma_linked_lch[chain_id].q_tail = \
100 dma_linked_lch[chain_id].q_count = 0; \
102 #define OMAP_DMA_CHAIN_QFULL(chain_id) \
103 (dma_linked_lch[chain_id].no_of_lchs_linked == \
104 dma_linked_lch[chain_id].q_count)
105 #define OMAP_DMA_CHAIN_QLAST(chain_id) \
107 ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
108 dma_linked_lch[chain_id].q_count) \
110 #define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
111 (0 == dma_linked_lch[chain_id].q_count)
112 #define __OMAP_DMA_CHAIN_INCQ(end) \
113 ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
114 #define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
116 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
117 dma_linked_lch[chain_id].q_count--; \
120 #define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
122 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
123 dma_linked_lch[chain_id].q_count++; \
127 static int dma_lch_count;
128 static int dma_chan_count;
129 static int omap_dma_reserve_channels;
131 static spinlock_t dma_chan_lock;
132 static struct omap_dma_lch *dma_chan;
133 static void __iomem *omap_dma_base;
135 static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
136 INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
137 INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
138 INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
139 INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
140 INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
143 static inline void disable_lnk(int lch);
144 static void omap_disable_channel_irq(int lch);
145 static inline void omap_enable_channel_irq(int lch);
147 #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
150 #define dma_read(reg) \
153 if (cpu_class_is_omap1()) \
154 __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \
156 __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \
160 #define dma_write(val, reg) \
162 if (cpu_class_is_omap1()) \
163 __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
165 __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \
168 #ifdef CONFIG_ARCH_OMAP15XX
169 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
170 int omap_dma_in_1510_mode(void)
172 return enable_1510_mode;
175 #define omap_dma_in_1510_mode() 0
178 #ifdef CONFIG_ARCH_OMAP1
179 static inline int get_gdma_dev(int req)
181 u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
182 int shift = ((req - 1) % 5) * 6;
184 return ((omap_readl(reg) >> shift) & 0x3f) + 1;
187 static inline void set_gdma_dev(int req, int dev)
189 u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
190 int shift = ((req - 1) % 5) * 6;
194 l &= ~(0x3f << shift);
195 l |= (dev - 1) << shift;
199 #define set_gdma_dev(req, dev) do {} while (0)
203 static void clear_lch_regs(int lch)
206 void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
208 for (i = 0; i < 0x2c; i += 2)
209 __raw_writew(0, lch_base + i);
212 void omap_set_dma_priority(int lch, int dst_port, int priority)
217 if (cpu_class_is_omap1()) {
219 case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
220 reg = OMAP_TC_OCPT1_PRIOR;
222 case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
223 reg = OMAP_TC_OCPT2_PRIOR;
225 case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
226 reg = OMAP_TC_EMIFF_PRIOR;
228 case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
229 reg = OMAP_TC_EMIFS_PRIOR;
237 l |= (priority & 0xf) << 8;
241 if (cpu_class_is_omap2()) {
244 ccr = dma_read(CCR(lch));
249 dma_write(ccr, CCR(lch));
252 EXPORT_SYMBOL(omap_set_dma_priority);
254 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
255 int frame_count, int sync_mode,
256 int dma_trigger, int src_or_dst_synch)
260 l = dma_read(CSDP(lch));
263 dma_write(l, CSDP(lch));
265 if (cpu_class_is_omap1()) {
268 ccr = dma_read(CCR(lch));
270 if (sync_mode == OMAP_DMA_SYNC_FRAME)
272 dma_write(ccr, CCR(lch));
274 ccr = dma_read(CCR2(lch));
276 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
278 dma_write(ccr, CCR2(lch));
281 if (cpu_class_is_omap2() && dma_trigger) {
284 val = dma_read(CCR(lch));
286 /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
287 val &= ~((3 << 19) | 0x1f);
288 val |= (dma_trigger & ~0x1f) << 14;
289 val |= dma_trigger & 0x1f;
291 if (sync_mode & OMAP_DMA_SYNC_FRAME)
296 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
301 if (src_or_dst_synch)
302 val |= 1 << 24; /* source synch */
304 val &= ~(1 << 24); /* dest synch */
306 dma_write(val, CCR(lch));
309 dma_write(elem_count, CEN(lch));
310 dma_write(frame_count, CFN(lch));
312 EXPORT_SYMBOL(omap_set_dma_transfer_params);
314 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
316 BUG_ON(omap_dma_in_1510_mode());
318 if (cpu_class_is_omap1()) {
321 w = dma_read(CCR2(lch));
325 case OMAP_DMA_CONSTANT_FILL:
328 case OMAP_DMA_TRANSPARENT_COPY:
331 case OMAP_DMA_COLOR_DIS:
336 dma_write(w, CCR2(lch));
338 w = dma_read(LCH_CTRL(lch));
340 /* Default is channel type 2D */
342 dma_write((u16)color, COLOR_L(lch));
343 dma_write((u16)(color >> 16), COLOR_U(lch));
344 w |= 1; /* Channel type G */
346 dma_write(w, LCH_CTRL(lch));
349 if (cpu_class_is_omap2()) {
352 val = dma_read(CCR(lch));
353 val &= ~((1 << 17) | (1 << 16));
356 case OMAP_DMA_CONSTANT_FILL:
359 case OMAP_DMA_TRANSPARENT_COPY:
362 case OMAP_DMA_COLOR_DIS:
367 dma_write(val, CCR(lch));
370 dma_write(color, COLOR(lch));
373 EXPORT_SYMBOL(omap_set_dma_color_mode);
375 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
377 if (cpu_class_is_omap2()) {
380 csdp = dma_read(CSDP(lch));
381 csdp &= ~(0x3 << 16);
382 csdp |= (mode << 16);
383 dma_write(csdp, CSDP(lch));
386 EXPORT_SYMBOL(omap_set_dma_write_mode);
388 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
390 if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
393 l = dma_read(LCH_CTRL(lch));
396 dma_write(l, LCH_CTRL(lch));
399 EXPORT_SYMBOL(omap_set_dma_channel_mode);
401 /* Note that src_port is only for omap1 */
402 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
403 unsigned long src_start,
404 int src_ei, int src_fi)
408 if (cpu_class_is_omap1()) {
411 w = dma_read(CSDP(lch));
414 dma_write(w, CSDP(lch));
417 l = dma_read(CCR(lch));
419 l |= src_amode << 12;
420 dma_write(l, CCR(lch));
422 if (cpu_class_is_omap1()) {
423 dma_write(src_start >> 16, CSSA_U(lch));
424 dma_write((u16)src_start, CSSA_L(lch));
427 if (cpu_class_is_omap2())
428 dma_write(src_start, CSSA(lch));
430 dma_write(src_ei, CSEI(lch));
431 dma_write(src_fi, CSFI(lch));
433 EXPORT_SYMBOL(omap_set_dma_src_params);
435 void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
437 omap_set_dma_transfer_params(lch, params->data_type,
438 params->elem_count, params->frame_count,
439 params->sync_mode, params->trigger,
440 params->src_or_dst_synch);
441 omap_set_dma_src_params(lch, params->src_port,
442 params->src_amode, params->src_start,
443 params->src_ei, params->src_fi);
445 omap_set_dma_dest_params(lch, params->dst_port,
446 params->dst_amode, params->dst_start,
447 params->dst_ei, params->dst_fi);
448 if (params->read_prio || params->write_prio)
449 omap_dma_set_prio_lch(lch, params->read_prio,
452 EXPORT_SYMBOL(omap_set_dma_params);
454 void omap_set_dma_src_index(int lch, int eidx, int fidx)
456 if (cpu_class_is_omap2())
459 dma_write(eidx, CSEI(lch));
460 dma_write(fidx, CSFI(lch));
462 EXPORT_SYMBOL(omap_set_dma_src_index);
464 void omap_set_dma_src_data_pack(int lch, int enable)
468 l = dma_read(CSDP(lch));
472 dma_write(l, CSDP(lch));
474 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
476 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
478 unsigned int burst = 0;
481 l = dma_read(CSDP(lch));
484 switch (burst_mode) {
485 case OMAP_DMA_DATA_BURST_DIS:
487 case OMAP_DMA_DATA_BURST_4:
488 if (cpu_class_is_omap2())
493 case OMAP_DMA_DATA_BURST_8:
494 if (cpu_class_is_omap2()) {
498 /* not supported by current hardware on OMAP1
502 case OMAP_DMA_DATA_BURST_16:
503 if (cpu_class_is_omap2()) {
507 /* OMAP1 don't support burst 16
515 dma_write(l, CSDP(lch));
517 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
519 /* Note that dest_port is only for OMAP1 */
520 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
521 unsigned long dest_start,
522 int dst_ei, int dst_fi)
526 if (cpu_class_is_omap1()) {
527 l = dma_read(CSDP(lch));
530 dma_write(l, CSDP(lch));
533 l = dma_read(CCR(lch));
535 l |= dest_amode << 14;
536 dma_write(l, CCR(lch));
538 if (cpu_class_is_omap1()) {
539 dma_write(dest_start >> 16, CDSA_U(lch));
540 dma_write(dest_start, CDSA_L(lch));
543 if (cpu_class_is_omap2())
544 dma_write(dest_start, CDSA(lch));
546 dma_write(dst_ei, CDEI(lch));
547 dma_write(dst_fi, CDFI(lch));
549 EXPORT_SYMBOL(omap_set_dma_dest_params);
551 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
553 if (cpu_class_is_omap2())
556 dma_write(eidx, CDEI(lch));
557 dma_write(fidx, CDFI(lch));
559 EXPORT_SYMBOL(omap_set_dma_dest_index);
561 void omap_set_dma_dest_data_pack(int lch, int enable)
565 l = dma_read(CSDP(lch));
569 dma_write(l, CSDP(lch));
571 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
573 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
575 unsigned int burst = 0;
578 l = dma_read(CSDP(lch));
581 switch (burst_mode) {
582 case OMAP_DMA_DATA_BURST_DIS:
584 case OMAP_DMA_DATA_BURST_4:
585 if (cpu_class_is_omap2())
590 case OMAP_DMA_DATA_BURST_8:
591 if (cpu_class_is_omap2())
596 case OMAP_DMA_DATA_BURST_16:
597 if (cpu_class_is_omap2()) {
601 /* OMAP1 don't support burst 16
605 printk(KERN_ERR "Invalid DMA burst mode\n");
610 dma_write(l, CSDP(lch));
612 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
614 static inline void omap_enable_channel_irq(int lch)
619 if (cpu_class_is_omap1())
620 status = dma_read(CSR(lch));
621 else if (cpu_class_is_omap2())
622 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
624 /* Enable some nice interrupts. */
625 dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
628 static void omap_disable_channel_irq(int lch)
630 if (cpu_class_is_omap2())
631 dma_write(0, CICR(lch));
634 void omap_enable_dma_irq(int lch, u16 bits)
636 dma_chan[lch].enabled_irqs |= bits;
638 EXPORT_SYMBOL(omap_enable_dma_irq);
640 void omap_disable_dma_irq(int lch, u16 bits)
642 dma_chan[lch].enabled_irqs &= ~bits;
644 EXPORT_SYMBOL(omap_disable_dma_irq);
646 static inline void enable_lnk(int lch)
650 l = dma_read(CLNK_CTRL(lch));
652 if (cpu_class_is_omap1())
655 /* Set the ENABLE_LNK bits */
656 if (dma_chan[lch].next_lch != -1)
657 l = dma_chan[lch].next_lch | (1 << 15);
659 #ifndef CONFIG_ARCH_OMAP1
660 if (cpu_class_is_omap2())
661 if (dma_chan[lch].next_linked_ch != -1)
662 l = dma_chan[lch].next_linked_ch | (1 << 15);
665 dma_write(l, CLNK_CTRL(lch));
668 static inline void disable_lnk(int lch)
672 l = dma_read(CLNK_CTRL(lch));
674 /* Disable interrupts */
675 if (cpu_class_is_omap1()) {
676 dma_write(0, CICR(lch));
677 /* Set the STOP_LNK bit */
681 if (cpu_class_is_omap2()) {
682 omap_disable_channel_irq(lch);
683 /* Clear the ENABLE_LNK bit */
687 dma_write(l, CLNK_CTRL(lch));
688 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
691 static inline void omap2_enable_irq_lch(int lch)
695 if (!cpu_class_is_omap2())
698 val = dma_read(IRQENABLE_L0);
700 dma_write(val, IRQENABLE_L0);
703 int omap_request_dma(int dev_id, const char *dev_name,
704 void (*callback)(int lch, u16 ch_status, void *data),
705 void *data, int *dma_ch_out)
707 int ch, free_ch = -1;
709 struct omap_dma_lch *chan;
711 spin_lock_irqsave(&dma_chan_lock, flags);
712 for (ch = 0; ch < dma_chan_count; ch++) {
713 if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
720 spin_unlock_irqrestore(&dma_chan_lock, flags);
723 chan = dma_chan + free_ch;
724 chan->dev_id = dev_id;
726 if (cpu_class_is_omap1())
727 clear_lch_regs(free_ch);
729 if (cpu_class_is_omap2())
730 omap_clear_dma(free_ch);
732 spin_unlock_irqrestore(&dma_chan_lock, flags);
734 chan->dev_name = dev_name;
735 chan->callback = callback;
739 #ifndef CONFIG_ARCH_OMAP1
740 if (cpu_class_is_omap2()) {
742 chan->next_linked_ch = -1;
746 chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
748 if (cpu_class_is_omap1())
749 chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
750 else if (cpu_class_is_omap2())
751 chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
752 OMAP2_DMA_TRANS_ERR_IRQ;
754 if (cpu_is_omap16xx()) {
755 /* If the sync device is set, configure it dynamically. */
757 set_gdma_dev(free_ch + 1, dev_id);
758 dev_id = free_ch + 1;
761 * Disable the 1510 compatibility mode and set the sync device
764 dma_write(dev_id | (1 << 10), CCR(free_ch));
765 } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
766 dma_write(dev_id, CCR(free_ch));
769 if (cpu_class_is_omap2()) {
770 omap2_enable_irq_lch(free_ch);
771 omap_enable_channel_irq(free_ch);
772 /* Clear the CSR register and IRQ status register */
773 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
774 dma_write(1 << free_ch, IRQSTATUS_L0);
777 *dma_ch_out = free_ch;
781 EXPORT_SYMBOL(omap_request_dma);
783 void omap_free_dma(int lch)
787 if (dma_chan[lch].dev_id == -1) {
788 pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
793 if (cpu_class_is_omap1()) {
794 /* Disable all DMA interrupts for the channel. */
795 dma_write(0, CICR(lch));
796 /* Make sure the DMA transfer is stopped. */
797 dma_write(0, CCR(lch));
800 if (cpu_class_is_omap2()) {
802 /* Disable interrupts */
803 val = dma_read(IRQENABLE_L0);
805 dma_write(val, IRQENABLE_L0);
807 /* Clear the CSR register and IRQ status register */
808 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
809 dma_write(1 << lch, IRQSTATUS_L0);
811 /* Disable all DMA interrupts for the channel. */
812 dma_write(0, CICR(lch));
814 /* Make sure the DMA transfer is stopped. */
815 dma_write(0, CCR(lch));
819 spin_lock_irqsave(&dma_chan_lock, flags);
820 dma_chan[lch].dev_id = -1;
821 dma_chan[lch].next_lch = -1;
822 dma_chan[lch].callback = NULL;
823 spin_unlock_irqrestore(&dma_chan_lock, flags);
825 EXPORT_SYMBOL(omap_free_dma);
828 * @brief omap_dma_set_global_params : Set global priority settings for dma
831 * @param max_fifo_depth
832 * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
833 * DMA_THREAD_RESERVE_ONET
834 * DMA_THREAD_RESERVE_TWOT
835 * DMA_THREAD_RESERVE_THREET
838 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
842 if (!cpu_class_is_omap2()) {
843 printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
850 reg = (arb_rate & 0xff) << 16;
851 reg |= (0xff & max_fifo_depth);
855 EXPORT_SYMBOL(omap_dma_set_global_params);
858 * @brief omap_dma_set_prio_lch : Set channel wise priority settings
861 * @param read_prio - Read priority
862 * @param write_prio - Write priority
863 * Both of the above can be set with one of the following values :
864 * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
867 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
868 unsigned char write_prio)
872 if (unlikely((lch < 0 || lch >= dma_lch_count))) {
873 printk(KERN_ERR "Invalid channel id\n");
876 l = dma_read(CCR(lch));
877 l &= ~((1 << 6) | (1 << 26));
878 if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
879 l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
881 l |= ((read_prio & 0x1) << 6);
883 dma_write(l, CCR(lch));
887 EXPORT_SYMBOL(omap_dma_set_prio_lch);
890 * Clears any DMA state so the DMA engine is ready to restart with new buffers
891 * through omap_start_dma(). Any buffers in flight are discarded.
893 void omap_clear_dma(int lch)
897 local_irq_save(flags);
899 if (cpu_class_is_omap1()) {
902 l = dma_read(CCR(lch));
903 l &= ~OMAP_DMA_CCR_EN;
904 dma_write(l, CCR(lch));
906 /* Clear pending interrupts */
907 l = dma_read(CSR(lch));
910 if (cpu_class_is_omap2()) {
912 void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
913 for (i = 0; i < 0x44; i += 4)
914 __raw_writel(0, lch_base + i);
917 local_irq_restore(flags);
919 EXPORT_SYMBOL(omap_clear_dma);
921 void omap_start_dma(int lch)
925 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
926 int next_lch, cur_lch;
927 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
929 dma_chan_link_map[lch] = 1;
930 /* Set the link register of the first channel */
933 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
934 cur_lch = dma_chan[lch].next_lch;
936 next_lch = dma_chan[cur_lch].next_lch;
938 /* The loop case: we've been here already */
939 if (dma_chan_link_map[cur_lch])
941 /* Mark the current channel */
942 dma_chan_link_map[cur_lch] = 1;
945 omap_enable_channel_irq(cur_lch);
948 } while (next_lch != -1);
949 } else if (cpu_is_omap242x() ||
950 (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) {
952 /* Errata: Need to write lch even if not using chaining */
953 dma_write(lch, CLNK_CTRL(lch));
956 omap_enable_channel_irq(lch);
958 l = dma_read(CCR(lch));
961 * Errata: On ES2.0 BUFFERING disable must be set.
962 * This will always fail on ES1.0
964 if (cpu_is_omap24xx())
965 l |= OMAP_DMA_CCR_EN;
967 l |= OMAP_DMA_CCR_EN;
968 dma_write(l, CCR(lch));
970 dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
972 EXPORT_SYMBOL(omap_start_dma);
974 void omap_stop_dma(int lch)
978 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
979 int next_lch, cur_lch = lch;
980 char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
982 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
984 /* The loop case: we've been here already */
985 if (dma_chan_link_map[cur_lch])
987 /* Mark the current channel */
988 dma_chan_link_map[cur_lch] = 1;
990 disable_lnk(cur_lch);
992 next_lch = dma_chan[cur_lch].next_lch;
994 } while (next_lch != -1);
999 /* Disable all interrupts on the channel */
1000 if (cpu_class_is_omap1())
1001 dma_write(0, CICR(lch));
1003 l = dma_read(CCR(lch));
1004 l &= ~OMAP_DMA_CCR_EN;
1005 dma_write(l, CCR(lch));
1007 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
1009 EXPORT_SYMBOL(omap_stop_dma);
1012 * Allows changing the DMA callback function or data. This may be needed if
1013 * the driver shares a single DMA channel for multiple dma triggers.
1015 int omap_set_dma_callback(int lch,
1016 void (*callback)(int lch, u16 ch_status, void *data),
1019 unsigned long flags;
1024 spin_lock_irqsave(&dma_chan_lock, flags);
1025 if (dma_chan[lch].dev_id == -1) {
1026 printk(KERN_ERR "DMA callback for not set for free channel\n");
1027 spin_unlock_irqrestore(&dma_chan_lock, flags);
1030 dma_chan[lch].callback = callback;
1031 dma_chan[lch].data = data;
1032 spin_unlock_irqrestore(&dma_chan_lock, flags);
1036 EXPORT_SYMBOL(omap_set_dma_callback);
1039 * Returns current physical source address for the given DMA channel.
1040 * If the channel is running the caller must disable interrupts prior calling
1041 * this function and process the returned value before re-enabling interrupt to
1042 * prevent races with the interrupt handler. Note that in continuous mode there
1043 * is a chance for CSSA_L register overflow inbetween the two reads resulting
1044 * in incorrect return value.
1046 dma_addr_t omap_get_dma_src_pos(int lch)
1048 dma_addr_t offset = 0;
1050 if (cpu_is_omap15xx())
1051 offset = dma_read(CPC(lch));
1053 offset = dma_read(CSAC(lch));
1056 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1057 * read before the DMA controller finished disabling the channel.
1059 if (!cpu_is_omap15xx() && offset == 0)
1060 offset = dma_read(CSAC(lch));
1062 if (cpu_class_is_omap1())
1063 offset |= (dma_read(CSSA_U(lch)) << 16);
1067 EXPORT_SYMBOL(omap_get_dma_src_pos);
1070 * Returns current physical destination address for the given DMA channel.
1071 * If the channel is running the caller must disable interrupts prior calling
1072 * this function and process the returned value before re-enabling interrupt to
1073 * prevent races with the interrupt handler. Note that in continuous mode there
1074 * is a chance for CDSA_L register overflow inbetween the two reads resulting
1075 * in incorrect return value.
1077 dma_addr_t omap_get_dma_dst_pos(int lch)
1079 dma_addr_t offset = 0;
1081 if (cpu_is_omap15xx())
1082 offset = dma_read(CPC(lch));
1084 offset = dma_read(CDAC(lch));
1087 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1088 * read before the DMA controller finished disabling the channel.
1090 if (!cpu_is_omap15xx() && offset == 0)
1091 offset = dma_read(CDAC(lch));
1093 if (cpu_class_is_omap1())
1094 offset |= (dma_read(CDSA_U(lch)) << 16);
1098 EXPORT_SYMBOL(omap_get_dma_dst_pos);
1100 int omap_get_dma_active_status(int lch)
1102 return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
1104 EXPORT_SYMBOL(omap_get_dma_active_status);
1106 int omap_dma_running(void)
1110 /* Check if LCD DMA is running */
1111 if (cpu_is_omap16xx())
1112 if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
1115 for (lch = 0; lch < dma_chan_count; lch++)
1116 if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
1123 * lch_queue DMA will start right after lch_head one is finished.
1124 * For this DMA link to start, you still need to start (see omap_start_dma)
1125 * the first one. That will fire up the entire queue.
1127 void omap_dma_link_lch(int lch_head, int lch_queue)
1129 if (omap_dma_in_1510_mode()) {
1130 if (lch_head == lch_queue) {
1131 dma_write(dma_read(CCR(lch_head)) | (3 << 8),
1135 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1140 if ((dma_chan[lch_head].dev_id == -1) ||
1141 (dma_chan[lch_queue].dev_id == -1)) {
1142 printk(KERN_ERR "omap_dma: trying to link "
1143 "non requested channels\n");
1147 dma_chan[lch_head].next_lch = lch_queue;
1149 EXPORT_SYMBOL(omap_dma_link_lch);
1152 * Once the DMA queue is stopped, we can destroy it.
1154 void omap_dma_unlink_lch(int lch_head, int lch_queue)
1156 if (omap_dma_in_1510_mode()) {
1157 if (lch_head == lch_queue) {
1158 dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
1162 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1167 if (dma_chan[lch_head].next_lch != lch_queue ||
1168 dma_chan[lch_head].next_lch == -1) {
1169 printk(KERN_ERR "omap_dma: trying to unlink "
1170 "non linked channels\n");
1174 if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
1175 (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
1176 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
1177 "before unlinking\n");
1181 dma_chan[lch_head].next_lch = -1;
1183 EXPORT_SYMBOL(omap_dma_unlink_lch);
1185 /*----------------------------------------------------------------------------*/
1187 #ifndef CONFIG_ARCH_OMAP1
1188 /* Create chain of DMA channesls */
1189 static void create_dma_lch_chain(int lch_head, int lch_queue)
1193 /* Check if this is the first link in chain */
1194 if (dma_chan[lch_head].next_linked_ch == -1) {
1195 dma_chan[lch_head].next_linked_ch = lch_queue;
1196 dma_chan[lch_head].prev_linked_ch = lch_queue;
1197 dma_chan[lch_queue].next_linked_ch = lch_head;
1198 dma_chan[lch_queue].prev_linked_ch = lch_head;
1201 /* a link exists, link the new channel in circular chain */
1203 dma_chan[lch_queue].next_linked_ch =
1204 dma_chan[lch_head].next_linked_ch;
1205 dma_chan[lch_queue].prev_linked_ch = lch_head;
1206 dma_chan[lch_head].next_linked_ch = lch_queue;
1207 dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
1211 l = dma_read(CLNK_CTRL(lch_head));
1214 dma_write(l, CLNK_CTRL(lch_head));
1216 l = dma_read(CLNK_CTRL(lch_queue));
1218 l |= (dma_chan[lch_queue].next_linked_ch);
1219 dma_write(l, CLNK_CTRL(lch_queue));
1223 * @brief omap_request_dma_chain : Request a chain of DMA channels
1225 * @param dev_id - Device id using the dma channel
1226 * @param dev_name - Device name
1227 * @param callback - Call back function
1229 * @no_of_chans - Number of channels requested
1230 * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
1231 * OMAP_DMA_DYNAMIC_CHAIN
1232 * @params - Channel parameters
1234 * @return - Succes : 0
1235 * Failure: -EINVAL/-ENOMEM
1237 int omap_request_dma_chain(int dev_id, const char *dev_name,
1238 void (*callback) (int lch, u16 ch_status,
1240 int *chain_id, int no_of_chans, int chain_mode,
1241 struct omap_dma_channel_params params)
1246 /* Is the chain mode valid ? */
1247 if (chain_mode != OMAP_DMA_STATIC_CHAIN
1248 && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
1249 printk(KERN_ERR "Invalid chain mode requested\n");
1253 if (unlikely((no_of_chans < 1
1254 || no_of_chans > dma_lch_count))) {
1255 printk(KERN_ERR "Invalid Number of channels requested\n");
1259 /* Allocate a queue to maintain the status of the channels
1261 channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
1262 if (channels == NULL) {
1263 printk(KERN_ERR "omap_dma: No memory for channel queue\n");
1267 /* request and reserve DMA channels for the chain */
1268 for (i = 0; i < no_of_chans; i++) {
1269 err = omap_request_dma(dev_id, dev_name,
1270 callback, NULL, &channels[i]);
1273 for (j = 0; j < i; j++)
1274 omap_free_dma(channels[j]);
1276 printk(KERN_ERR "omap_dma: Request failed %d\n", err);
1279 dma_chan[channels[i]].prev_linked_ch = -1;
1280 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1283 * Allowing client drivers to set common parameters now,
1284 * so that later only relevant (src_start, dest_start
1285 * and element count) can be set
1287 omap_set_dma_params(channels[i], ¶ms);
1290 *chain_id = channels[0];
1291 dma_linked_lch[*chain_id].linked_dmach_q = channels;
1292 dma_linked_lch[*chain_id].chain_mode = chain_mode;
1293 dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1294 dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
1296 for (i = 0; i < no_of_chans; i++)
1297 dma_chan[channels[i]].chain_id = *chain_id;
1299 /* Reset the Queue pointers */
1300 OMAP_DMA_CHAIN_QINIT(*chain_id);
1302 /* Set up the chain */
1303 if (no_of_chans == 1)
1304 create_dma_lch_chain(channels[0], channels[0]);
1306 for (i = 0; i < (no_of_chans - 1); i++)
1307 create_dma_lch_chain(channels[i], channels[i + 1]);
1312 EXPORT_SYMBOL(omap_request_dma_chain);
1315 * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
1316 * params after setting it. Dont do this while dma is running!!
1318 * @param chain_id - Chained logical channel id.
1321 * @return - Success : 0
1324 int omap_modify_dma_chain_params(int chain_id,
1325 struct omap_dma_channel_params params)
1330 /* Check for input params */
1331 if (unlikely((chain_id < 0
1332 || chain_id >= dma_lch_count))) {
1333 printk(KERN_ERR "Invalid chain id\n");
1337 /* Check if the chain exists */
1338 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1339 printk(KERN_ERR "Chain doesn't exists\n");
1342 channels = dma_linked_lch[chain_id].linked_dmach_q;
1344 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1346 * Allowing client drivers to set common parameters now,
1347 * so that later only relevant (src_start, dest_start
1348 * and element count) can be set
1350 omap_set_dma_params(channels[i], ¶ms);
1355 EXPORT_SYMBOL(omap_modify_dma_chain_params);
1358 * @brief omap_free_dma_chain - Free all the logical channels in a chain.
1362 * @return - Success : 0
1365 int omap_free_dma_chain(int chain_id)
1370 /* Check for input params */
1371 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1372 printk(KERN_ERR "Invalid chain id\n");
1376 /* Check if the chain exists */
1377 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1378 printk(KERN_ERR "Chain doesn't exists\n");
1382 channels = dma_linked_lch[chain_id].linked_dmach_q;
1383 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1384 dma_chan[channels[i]].next_linked_ch = -1;
1385 dma_chan[channels[i]].prev_linked_ch = -1;
1386 dma_chan[channels[i]].chain_id = -1;
1387 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1388 omap_free_dma(channels[i]);
1393 dma_linked_lch[chain_id].linked_dmach_q = NULL;
1394 dma_linked_lch[chain_id].chain_mode = -1;
1395 dma_linked_lch[chain_id].chain_state = -1;
1399 EXPORT_SYMBOL(omap_free_dma_chain);
1402 * @brief omap_dma_chain_status - Check if the chain is in
1403 * active / inactive state.
1406 * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
1409 int omap_dma_chain_status(int chain_id)
1411 /* Check for input params */
1412 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1413 printk(KERN_ERR "Invalid chain id\n");
1417 /* Check if the chain exists */
1418 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1419 printk(KERN_ERR "Chain doesn't exists\n");
1422 pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
1423 dma_linked_lch[chain_id].q_count);
1425 if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
1426 return OMAP_DMA_CHAIN_INACTIVE;
1428 return OMAP_DMA_CHAIN_ACTIVE;
1430 EXPORT_SYMBOL(omap_dma_chain_status);
1433 * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
1434 * set the params and start the transfer.
1437 * @param src_start - buffer start address
1438 * @param dest_start - Dest address
1440 * @param frame_count
1441 * @param callbk_data - channel callback parameter data.
1443 * @return - Success : 0
1444 * Failure: -EINVAL/-EBUSY
1446 int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
1447 int elem_count, int frame_count, void *callbk_data)
1454 * if buffer size is less than 1 then there is
1455 * no use of starting the chain
1457 if (elem_count < 1) {
1458 printk(KERN_ERR "Invalid buffer size\n");
1462 /* Check for input params */
1463 if (unlikely((chain_id < 0
1464 || chain_id >= dma_lch_count))) {
1465 printk(KERN_ERR "Invalid chain id\n");
1469 /* Check if the chain exists */
1470 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1471 printk(KERN_ERR "Chain doesn't exist\n");
1475 /* Check if all the channels in chain are in use */
1476 if (OMAP_DMA_CHAIN_QFULL(chain_id))
1479 /* Frame count may be negative in case of indexed transfers */
1480 channels = dma_linked_lch[chain_id].linked_dmach_q;
1482 /* Get a free channel */
1483 lch = channels[dma_linked_lch[chain_id].q_tail];
1485 /* Store the callback data */
1486 dma_chan[lch].data = callbk_data;
1488 /* Increment the q_tail */
1489 OMAP_DMA_CHAIN_INCQTAIL(chain_id);
1491 /* Set the params to the free channel */
1493 dma_write(src_start, CSSA(lch));
1494 if (dest_start != 0)
1495 dma_write(dest_start, CDSA(lch));
1497 /* Write the buffer size */
1498 dma_write(elem_count, CEN(lch));
1499 dma_write(frame_count, CFN(lch));
1502 * If the chain is dynamically linked,
1503 * then we may have to start the chain if its not active
1505 if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
1508 * In Dynamic chain, if the chain is not started,
1511 if (dma_linked_lch[chain_id].chain_state ==
1512 DMA_CHAIN_NOTSTARTED) {
1513 /* Enable the link in previous channel */
1514 if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1516 enable_lnk(dma_chan[lch].prev_linked_ch);
1517 dma_chan[lch].state = DMA_CH_QUEUED;
1521 * Chain is already started, make sure its active,
1522 * if not then start the chain
1527 if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1529 enable_lnk(dma_chan[lch].prev_linked_ch);
1530 dma_chan[lch].state = DMA_CH_QUEUED;
1532 if (0 == ((1 << 7) & dma_read(
1533 CCR(dma_chan[lch].prev_linked_ch)))) {
1534 disable_lnk(dma_chan[lch].
1536 pr_debug("\n prev ch is stopped\n");
1541 else if (dma_chan[dma_chan[lch].prev_linked_ch].state
1543 enable_lnk(dma_chan[lch].prev_linked_ch);
1544 dma_chan[lch].state = DMA_CH_QUEUED;
1547 omap_enable_channel_irq(lch);
1549 l = dma_read(CCR(lch));
1551 if ((0 == (l & (1 << 24))))
1555 if (start_dma == 1) {
1556 if (0 == (l & (1 << 7))) {
1558 dma_chan[lch].state = DMA_CH_STARTED;
1559 pr_debug("starting %d\n", lch);
1560 dma_write(l, CCR(lch));
1564 if (0 == (l & (1 << 7)))
1565 dma_write(l, CCR(lch));
1567 dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
1573 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
1576 * @brief omap_start_dma_chain_transfers - Start the chain
1580 * @return - Success : 0
1581 * Failure : -EINVAL/-EBUSY
1583 int omap_start_dma_chain_transfers(int chain_id)
1588 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1589 printk(KERN_ERR "Invalid chain id\n");
1593 channels = dma_linked_lch[chain_id].linked_dmach_q;
1595 if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
1596 printk(KERN_ERR "Chain is already started\n");
1600 if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
1601 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
1603 enable_lnk(channels[i]);
1604 omap_enable_channel_irq(channels[i]);
1607 omap_enable_channel_irq(channels[0]);
1610 l = dma_read(CCR(channels[0]));
1612 dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
1613 dma_chan[channels[0]].state = DMA_CH_STARTED;
1615 if ((0 == (l & (1 << 24))))
1619 dma_write(l, CCR(channels[0]));
1621 dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
1625 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
1628 * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
1632 * @return - Success : 0
1635 int omap_stop_dma_chain_transfers(int chain_id)
1641 /* Check for input params */
1642 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1643 printk(KERN_ERR "Invalid chain id\n");
1647 /* Check if the chain exists */
1648 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1649 printk(KERN_ERR "Chain doesn't exists\n");
1652 channels = dma_linked_lch[chain_id].linked_dmach_q;
1656 * Special programming model needed to disable DMA before end of block
1658 sys_cf = dma_read(OCP_SYSCONFIG);
1660 /* Middle mode reg set no Standby */
1661 l &= ~((1 << 12)|(1 << 13));
1662 dma_write(l, OCP_SYSCONFIG);
1664 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1666 /* Stop the Channel transmission */
1667 l = dma_read(CCR(channels[i]));
1669 dma_write(l, CCR(channels[i]));
1671 /* Disable the link in all the channels */
1672 disable_lnk(channels[i]);
1673 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1676 dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1678 /* Reset the Queue pointers */
1679 OMAP_DMA_CHAIN_QINIT(chain_id);
1681 /* Errata - put in the old value */
1682 dma_write(sys_cf, OCP_SYSCONFIG);
1686 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
1688 /* Get the index of the ongoing DMA in chain */
1690 * @brief omap_get_dma_chain_index - Get the element and frame index
1691 * of the ongoing DMA in chain
1694 * @param ei - Element index
1695 * @param fi - Frame index
1697 * @return - Success : 0
1700 int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
1705 /* Check for input params */
1706 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1707 printk(KERN_ERR "Invalid chain id\n");
1711 /* Check if the chain exists */
1712 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1713 printk(KERN_ERR "Chain doesn't exists\n");
1719 channels = dma_linked_lch[chain_id].linked_dmach_q;
1721 /* Get the current channel */
1722 lch = channels[dma_linked_lch[chain_id].q_head];
1724 *ei = dma_read(CCEN(lch));
1725 *fi = dma_read(CCFN(lch));
1729 EXPORT_SYMBOL(omap_get_dma_chain_index);
1732 * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
1733 * ongoing DMA in chain
1737 * @return - Success : Destination position
1740 int omap_get_dma_chain_dst_pos(int chain_id)
1745 /* Check for input params */
1746 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1747 printk(KERN_ERR "Invalid chain id\n");
1751 /* Check if the chain exists */
1752 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1753 printk(KERN_ERR "Chain doesn't exists\n");
1757 channels = dma_linked_lch[chain_id].linked_dmach_q;
1759 /* Get the current channel */
1760 lch = channels[dma_linked_lch[chain_id].q_head];
1762 return dma_read(CDAC(lch));
1764 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
1767 * @brief omap_get_dma_chain_src_pos - Get the source position
1768 * of the ongoing DMA in chain
1771 * @return - Success : Destination position
1774 int omap_get_dma_chain_src_pos(int chain_id)
1779 /* Check for input params */
1780 if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
1781 printk(KERN_ERR "Invalid chain id\n");
1785 /* Check if the chain exists */
1786 if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1787 printk(KERN_ERR "Chain doesn't exists\n");
1791 channels = dma_linked_lch[chain_id].linked_dmach_q;
1793 /* Get the current channel */
1794 lch = channels[dma_linked_lch[chain_id].q_head];
1796 return dma_read(CSAC(lch));
1798 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
1799 #endif /* ifndef CONFIG_ARCH_OMAP1 */
1801 /*----------------------------------------------------------------------------*/
1803 #ifdef CONFIG_ARCH_OMAP1
1805 static int omap1_dma_handle_ch(int ch)
1809 if (enable_1510_mode && ch >= 6) {
1810 csr = dma_chan[ch].saved_csr;
1811 dma_chan[ch].saved_csr = 0;
1813 csr = dma_read(CSR(ch));
1814 if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
1815 dma_chan[ch + 6].saved_csr = csr >> 7;
1818 if ((csr & 0x3f) == 0)
1820 if (unlikely(dma_chan[ch].dev_id == -1)) {
1821 printk(KERN_WARNING "Spurious interrupt from DMA channel "
1822 "%d (CSR %04x)\n", ch, csr);
1825 if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
1826 printk(KERN_WARNING "DMA timeout with device %d\n",
1827 dma_chan[ch].dev_id);
1828 if (unlikely(csr & OMAP_DMA_DROP_IRQ))
1829 printk(KERN_WARNING "DMA synchronization event drop occurred "
1830 "with device %d\n", dma_chan[ch].dev_id);
1831 if (likely(csr & OMAP_DMA_BLOCK_IRQ))
1832 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1833 if (likely(dma_chan[ch].callback != NULL))
1834 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
1839 static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
1841 int ch = ((int) dev_id) - 1;
1845 int handled_now = 0;
1847 handled_now += omap1_dma_handle_ch(ch);
1848 if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
1849 handled_now += omap1_dma_handle_ch(ch + 6);
1852 handled += handled_now;
1855 return handled ? IRQ_HANDLED : IRQ_NONE;
1859 #define omap1_dma_irq_handler NULL
1862 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
1863 defined(CONFIG_ARCH_OMAP4)
1865 static int omap2_dma_handle_ch(int ch)
1867 u32 status = dma_read(CSR(ch));
1870 if (printk_ratelimit())
1871 printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
1873 dma_write(1 << ch, IRQSTATUS_L0);
1876 if (unlikely(dma_chan[ch].dev_id == -1)) {
1877 if (printk_ratelimit())
1878 printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
1879 "channel %d\n", status, ch);
1882 if (unlikely(status & OMAP_DMA_DROP_IRQ))
1884 "DMA synchronization event drop occurred with device "
1885 "%d\n", dma_chan[ch].dev_id);
1886 if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
1887 printk(KERN_INFO "DMA transaction error with device %d\n",
1888 dma_chan[ch].dev_id);
1889 if (cpu_class_is_omap2()) {
1890 /* Errata: sDMA Channel is not disabled
1891 * after a transaction error. So we explicitely
1892 * disable the channel
1896 ccr = dma_read(CCR(ch));
1897 ccr &= ~OMAP_DMA_CCR_EN;
1898 dma_write(ccr, CCR(ch));
1899 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1902 if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
1903 printk(KERN_INFO "DMA secure error with device %d\n",
1904 dma_chan[ch].dev_id);
1905 if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
1906 printk(KERN_INFO "DMA misaligned error with device %d\n",
1907 dma_chan[ch].dev_id);
1909 dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
1910 dma_write(1 << ch, IRQSTATUS_L0);
1912 /* If the ch is not chained then chain_id will be -1 */
1913 if (dma_chan[ch].chain_id != -1) {
1914 int chain_id = dma_chan[ch].chain_id;
1915 dma_chan[ch].state = DMA_CH_NOTSTARTED;
1916 if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
1917 dma_chan[dma_chan[ch].next_linked_ch].state =
1919 if (dma_linked_lch[chain_id].chain_mode ==
1920 OMAP_DMA_DYNAMIC_CHAIN)
1923 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
1924 OMAP_DMA_CHAIN_INCQHEAD(chain_id);
1926 status = dma_read(CSR(ch));
1929 dma_write(status, CSR(ch));
1931 if (likely(dma_chan[ch].callback != NULL))
1932 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
1937 /* STATUS register count is from 1-32 while our is 0-31 */
1938 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
1940 u32 val, enable_reg;
1943 val = dma_read(IRQSTATUS_L0);
1945 if (printk_ratelimit())
1946 printk(KERN_WARNING "Spurious DMA IRQ\n");
1949 enable_reg = dma_read(IRQENABLE_L0);
1950 val &= enable_reg; /* Dispatch only relevant interrupts */
1951 for (i = 0; i < dma_lch_count && val != 0; i++) {
1953 omap2_dma_handle_ch(i);
1960 static struct irqaction omap24xx_dma_irq = {
1962 .handler = omap2_dma_irq_handler,
1963 .flags = IRQF_DISABLED
1967 static struct irqaction omap24xx_dma_irq;
1970 /*----------------------------------------------------------------------------*/
1972 static struct lcd_dma_info {
1975 void (*callback)(u16 status, void *data);
1979 unsigned long addr, size;
1980 int rotate, data_type, xres, yres;
1986 int single_transfer;
1989 void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
1992 lcd_dma.addr = addr;
1993 lcd_dma.data_type = data_type;
1994 lcd_dma.xres = fb_xres;
1995 lcd_dma.yres = fb_yres;
1997 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
1999 void omap_set_lcd_dma_src_port(int port)
2001 lcd_dma.src_port = port;
2004 void omap_set_lcd_dma_ext_controller(int external)
2006 lcd_dma.ext_ctrl = external;
2008 EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
2010 void omap_set_lcd_dma_single_transfer(int single)
2012 lcd_dma.single_transfer = single;
2014 EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
2016 void omap_set_lcd_dma_b1_rotation(int rotate)
2018 if (omap_dma_in_1510_mode()) {
2019 printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
2023 lcd_dma.rotate = rotate;
2025 EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
2027 void omap_set_lcd_dma_b1_mirror(int mirror)
2029 if (omap_dma_in_1510_mode()) {
2030 printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
2033 lcd_dma.mirror = mirror;
2035 EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
2037 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
2039 if (omap_dma_in_1510_mode()) {
2040 printk(KERN_ERR "DMA virtual resulotion is not supported "
2044 lcd_dma.vxres = vxres;
2046 EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
2048 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
2050 if (omap_dma_in_1510_mode()) {
2051 printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
2054 lcd_dma.xscale = xscale;
2055 lcd_dma.yscale = yscale;
2057 EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
2059 static void set_b1_regs(void)
2061 unsigned long top, bottom;
2064 unsigned long en, fn;
2066 unsigned long vxres;
2067 unsigned int xscale, yscale;
2069 switch (lcd_dma.data_type) {
2070 case OMAP_DMA_DATA_TYPE_S8:
2073 case OMAP_DMA_DATA_TYPE_S16:
2076 case OMAP_DMA_DATA_TYPE_S32:
2084 vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
2085 xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
2086 yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
2087 BUG_ON(vxres < lcd_dma.xres);
2089 #define PIXADDR(x, y) (lcd_dma.addr + \
2090 ((y) * vxres * yscale + (x) * xscale) * es)
2091 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
2093 switch (lcd_dma.rotate) {
2095 if (!lcd_dma.mirror) {
2096 top = PIXADDR(0, 0);
2097 bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2098 /* 1510 DMA requires the bottom address to be 2 more
2099 * than the actual last memory access location. */
2100 if (omap_dma_in_1510_mode() &&
2101 lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
2103 ei = PIXSTEP(0, 0, 1, 0);
2104 fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
2106 top = PIXADDR(lcd_dma.xres - 1, 0);
2107 bottom = PIXADDR(0, lcd_dma.yres - 1);
2108 ei = PIXSTEP(1, 0, 0, 0);
2109 fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
2115 if (!lcd_dma.mirror) {
2116 top = PIXADDR(0, lcd_dma.yres - 1);
2117 bottom = PIXADDR(lcd_dma.xres - 1, 0);
2118 ei = PIXSTEP(0, 1, 0, 0);
2119 fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
2121 top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2122 bottom = PIXADDR(0, 0);
2123 ei = PIXSTEP(0, 1, 0, 0);
2124 fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
2130 if (!lcd_dma.mirror) {
2131 top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2132 bottom = PIXADDR(0, 0);
2133 ei = PIXSTEP(1, 0, 0, 0);
2134 fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
2136 top = PIXADDR(0, lcd_dma.yres - 1);
2137 bottom = PIXADDR(lcd_dma.xres - 1, 0);
2138 ei = PIXSTEP(0, 0, 1, 0);
2139 fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
2145 if (!lcd_dma.mirror) {
2146 top = PIXADDR(lcd_dma.xres - 1, 0);
2147 bottom = PIXADDR(0, lcd_dma.yres - 1);
2148 ei = PIXSTEP(0, 0, 0, 1);
2149 fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
2151 top = PIXADDR(0, 0);
2152 bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
2153 ei = PIXSTEP(0, 0, 0, 1);
2154 fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
2161 return; /* Suppress warning about uninitialized vars */
2164 if (omap_dma_in_1510_mode()) {
2165 omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
2166 omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
2167 omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
2168 omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
2174 omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
2175 omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
2176 omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
2177 omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
2179 omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
2180 omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
2182 w = omap_readw(OMAP1610_DMA_LCD_CSDP);
2184 w |= lcd_dma.data_type;
2185 omap_writew(w, OMAP1610_DMA_LCD_CSDP);
2187 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2188 /* Always set the source port as SDRAM for now*/
2190 if (lcd_dma.callback != NULL)
2191 w |= 1 << 1; /* Block interrupt enable */
2194 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2196 if (!(lcd_dma.rotate || lcd_dma.mirror ||
2197 lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
2200 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2201 /* Set the double-indexed addressing mode */
2203 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2205 omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
2206 omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
2207 omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
2210 static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
2214 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2215 if (unlikely(!(w & (1 << 3)))) {
2216 printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
2221 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2223 if (lcd_dma.callback != NULL)
2224 lcd_dma.callback(w, lcd_dma.cb_data);
2229 int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
2232 spin_lock_irq(&lcd_dma.lock);
2233 if (lcd_dma.reserved) {
2234 spin_unlock_irq(&lcd_dma.lock);
2235 printk(KERN_ERR "LCD DMA channel already reserved\n");
2239 lcd_dma.reserved = 1;
2240 spin_unlock_irq(&lcd_dma.lock);
2241 lcd_dma.callback = callback;
2242 lcd_dma.cb_data = data;
2244 lcd_dma.single_transfer = 0;
2250 lcd_dma.ext_ctrl = 0;
2251 lcd_dma.src_port = 0;
2255 EXPORT_SYMBOL(omap_request_lcd_dma);
2257 void omap_free_lcd_dma(void)
2259 spin_lock(&lcd_dma.lock);
2260 if (!lcd_dma.reserved) {
2261 spin_unlock(&lcd_dma.lock);
2262 printk(KERN_ERR "LCD DMA is not reserved\n");
2266 if (!enable_1510_mode)
2267 omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
2268 OMAP1610_DMA_LCD_CCR);
2269 lcd_dma.reserved = 0;
2270 spin_unlock(&lcd_dma.lock);
2272 EXPORT_SYMBOL(omap_free_lcd_dma);
2274 void omap_enable_lcd_dma(void)
2279 * Set the Enable bit only if an external controller is
2280 * connected. Otherwise the OMAP internal controller will
2281 * start the transfer when it gets enabled.
2283 if (enable_1510_mode || !lcd_dma.ext_ctrl)
2286 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2288 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2292 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2294 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2296 EXPORT_SYMBOL(omap_enable_lcd_dma);
2298 void omap_setup_lcd_dma(void)
2300 BUG_ON(lcd_dma.active);
2301 if (!enable_1510_mode) {
2302 /* Set some reasonable defaults */
2303 omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
2304 omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
2305 omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
2308 if (!enable_1510_mode) {
2311 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2313 * If DMA was already active set the end_prog bit to have
2314 * the programmed register set loaded into the active
2317 w |= 1 << 11; /* End_prog */
2318 if (!lcd_dma.single_transfer)
2319 w |= (3 << 8); /* Auto_init, repeat */
2320 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2323 EXPORT_SYMBOL(omap_setup_lcd_dma);
2325 void omap_stop_lcd_dma(void)
2330 if (enable_1510_mode || !lcd_dma.ext_ctrl)
2333 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2335 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2337 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2339 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2341 EXPORT_SYMBOL(omap_stop_lcd_dma);
2343 /*----------------------------------------------------------------------------*/
2345 static int __init omap_init_dma(void)
2349 if (cpu_class_is_omap1()) {
2350 omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
2351 dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
2352 } else if (cpu_is_omap24xx()) {
2353 omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
2354 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2355 } else if (cpu_is_omap34xx()) {
2356 omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
2357 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2358 } else if (cpu_is_omap44xx()) {
2359 omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
2360 dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
2362 pr_err("DMA init failed for unsupported omap\n");
2366 if (cpu_class_is_omap2() && omap_dma_reserve_channels
2367 && (omap_dma_reserve_channels <= dma_lch_count))
2368 dma_lch_count = omap_dma_reserve_channels;
2370 dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
2375 if (cpu_class_is_omap2()) {
2376 dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
2377 dma_lch_count, GFP_KERNEL);
2378 if (!dma_linked_lch) {
2384 if (cpu_is_omap15xx()) {
2385 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
2387 enable_1510_mode = 1;
2388 } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
2389 printk(KERN_INFO "OMAP DMA hardware version %d\n",
2391 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
2392 (dma_read(CAPS_0_U) << 16) |
2394 (dma_read(CAPS_1_U) << 16) |
2396 dma_read(CAPS_2), dma_read(CAPS_3),
2398 if (!enable_1510_mode) {
2401 /* Disable OMAP 3.0/3.1 compatibility mode. */
2405 dma_chan_count = 16;
2408 if (cpu_is_omap16xx()) {
2411 /* this would prevent OMAP sleep */
2412 w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2414 omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2416 } else if (cpu_class_is_omap2()) {
2417 u8 revision = dma_read(REVISION) & 0xff;
2418 printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
2419 revision >> 4, revision & 0xf);
2420 dma_chan_count = dma_lch_count;
2426 spin_lock_init(&lcd_dma.lock);
2427 spin_lock_init(&dma_chan_lock);
2429 for (ch = 0; ch < dma_chan_count; ch++) {
2431 dma_chan[ch].dev_id = -1;
2432 dma_chan[ch].next_lch = -1;
2434 if (ch >= 6 && enable_1510_mode)
2437 if (cpu_class_is_omap1()) {
2439 * request_irq() doesn't like dev_id (ie. ch) being
2440 * zero, so we have to kludge around this.
2442 r = request_irq(omap1_dma_irq[ch],
2443 omap1_dma_irq_handler, 0, "DMA",
2448 printk(KERN_ERR "unable to request IRQ %d "
2449 "for DMA (error %d)\n",
2450 omap1_dma_irq[ch], r);
2451 for (i = 0; i < ch; i++)
2452 free_irq(omap1_dma_irq[i],
2459 if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
2460 omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
2461 DMA_DEFAULT_FIFO_DEPTH, 0);
2463 if (cpu_class_is_omap2()) {
2465 if (cpu_is_omap44xx())
2466 irq = INT_44XX_SDMA_IRQ0;
2468 irq = INT_24XX_SDMA_IRQ0;
2469 setup_irq(irq, &omap24xx_dma_irq);
2472 /* Enable smartidle idlemodes and autoidle */
2473 if (cpu_is_omap34xx()) {
2474 u32 v = dma_read(OCP_SYSCONFIG);
2475 v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
2476 DMA_SYSCONFIG_SIDLEMODE_MASK |
2477 DMA_SYSCONFIG_AUTOIDLE);
2478 v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
2479 DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
2480 DMA_SYSCONFIG_AUTOIDLE);
2481 dma_write(v , OCP_SYSCONFIG);
2485 /* FIXME: Update LCD DMA to work on 24xx */
2486 if (cpu_class_is_omap1()) {
2487 r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
2492 printk(KERN_ERR "unable to request IRQ for LCD DMA "
2494 for (i = 0; i < dma_chan_count; i++)
2495 free_irq(omap1_dma_irq[i], (void *) (i + 1));
2503 arch_initcall(omap_init_dma);
2506 * Reserve the omap SDMA channels using cmdline bootarg
2507 * "omap_dma_reserve_ch=". The valid range is 1 to 32
2509 static int __init omap_dma_cmdline_reserve_ch(char *str)
2511 if (get_option(&str, &omap_dma_reserve_channels) != 1)
2512 omap_dma_reserve_channels = 0;
2516 __setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);