2 * arch/arm/plat-omap/include/mach/hardware.h
4 * Hardware definitions for TI OMAP processors and boards
6 * NOTE: Please put device driver specific defines into a separate header
7 * file for each driver.
9 * Copyright (C) 2001 RidgeRun, Inc.
10 * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
12 * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
13 * and Dirk Behme <dirk.behme@de.bosch.com>
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2 of the License, or (at your
18 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
36 #ifndef __ASM_ARCH_OMAP_HARDWARE_H
37 #define __ASM_ARCH_OMAP_HARDWARE_H
39 #include <asm/sizes.h>
41 #include <asm/types.h>
44 #include <mach/serial.h>
47 * ---------------------------------------------------------------------------
48 * Common definitions for all OMAP processors
49 * NOTE: Put all processor or board specific parts to the special header
51 * ---------------------------------------------------------------------------
55 * ----------------------------------------------------------------------------
57 * ----------------------------------------------------------------------------
59 #define OMAP_MPU_TIMER1_BASE (0xfffec500)
60 #define OMAP_MPU_TIMER2_BASE (0xfffec600)
61 #define OMAP_MPU_TIMER3_BASE (0xfffec700)
62 #define MPU_TIMER_FREE (1 << 6)
63 #define MPU_TIMER_CLOCK_ENABLE (1 << 5)
64 #define MPU_TIMER_AR (1 << 1)
65 #define MPU_TIMER_ST (1 << 0)
68 * ----------------------------------------------------------------------------
70 * ----------------------------------------------------------------------------
72 #define CLKGEN_REG_BASE (0xfffece00)
73 #define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
74 #define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
75 #define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
76 #define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
77 #define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
78 #define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
79 #define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
80 #define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
86 #define SETARM_IDLE_SHIFT
88 /* DPLL control registers */
89 #define DPLL_CTL (0xfffecf00)
91 /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
92 #define DSP_CONFIG_REG_BASE IOMEM(0xe1008000)
93 #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
94 #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
95 #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
96 #define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
99 * ---------------------------------------------------------------------------
101 * ---------------------------------------------------------------------------
103 #define ULPD_REG_BASE (0xfffe0800)
104 #define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
105 #define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
106 #define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
107 # define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
108 # define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
109 #define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
110 # define SOFT_UDC_REQ (1 << 4)
111 # define SOFT_USB_CLK_REQ (1 << 3)
112 # define SOFT_DPLL_REQ (1 << 0)
113 #define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
114 #define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
115 #define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
116 #define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
117 #define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
118 # define DIS_MMC2_DPLL_REQ (1 << 11)
119 # define DIS_MMC1_DPLL_REQ (1 << 10)
120 # define DIS_UART3_DPLL_REQ (1 << 9)
121 # define DIS_UART2_DPLL_REQ (1 << 8)
122 # define DIS_UART1_DPLL_REQ (1 << 7)
123 # define DIS_USB_HOST_DPLL_REQ (1 << 6)
124 #define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
125 #define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
128 * ---------------------------------------------------------------------------
130 * ---------------------------------------------------------------------------
133 /* Watchdog timer within the OMAP3.2 gigacell */
134 #define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
135 #define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
136 #define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
137 #define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
138 #define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
141 * ---------------------------------------------------------------------------
143 * ---------------------------------------------------------------------------
145 #ifdef CONFIG_ARCH_OMAP1
148 * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
149 * or something similar.. -- PFM.
152 #define OMAP_IH1_BASE 0xfffecb00
153 #define OMAP_IH2_BASE 0xfffe0000
155 #define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
156 #define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
157 #define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
158 #define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
159 #define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
160 #define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
161 #define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
163 #define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
164 #define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
165 #define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
166 #define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
167 #define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
168 #define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
169 #define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
171 #define IRQ_ITR_REG_OFFSET 0x00
172 #define IRQ_MIR_REG_OFFSET 0x04
173 #define IRQ_SIR_IRQ_REG_OFFSET 0x10
174 #define IRQ_SIR_FIQ_REG_OFFSET 0x14
175 #define IRQ_CONTROL_REG_OFFSET 0x18
176 #define IRQ_ISR_REG_OFFSET 0x9c
177 #define IRQ_ILR0_REG_OFFSET 0x1c
178 #define IRQ_GMR_REG_OFFSET 0xa0
183 * ----------------------------------------------------------------------------
184 * System control registers
185 * ----------------------------------------------------------------------------
187 #define MOD_CONF_CTRL_0 0xfffe1080
188 #define MOD_CONF_CTRL_1 0xfffe1110
191 * ----------------------------------------------------------------------------
192 * Pin multiplexing registers
193 * ----------------------------------------------------------------------------
195 #define FUNC_MUX_CTRL_0 0xfffe1000
196 #define FUNC_MUX_CTRL_1 0xfffe1004
197 #define FUNC_MUX_CTRL_2 0xfffe1008
198 #define COMP_MODE_CTRL_0 0xfffe100c
199 #define FUNC_MUX_CTRL_3 0xfffe1010
200 #define FUNC_MUX_CTRL_4 0xfffe1014
201 #define FUNC_MUX_CTRL_5 0xfffe1018
202 #define FUNC_MUX_CTRL_6 0xfffe101C
203 #define FUNC_MUX_CTRL_7 0xfffe1020
204 #define FUNC_MUX_CTRL_8 0xfffe1024
205 #define FUNC_MUX_CTRL_9 0xfffe1028
206 #define FUNC_MUX_CTRL_A 0xfffe102C
207 #define FUNC_MUX_CTRL_B 0xfffe1030
208 #define FUNC_MUX_CTRL_C 0xfffe1034
209 #define FUNC_MUX_CTRL_D 0xfffe1038
210 #define PULL_DWN_CTRL_0 0xfffe1040
211 #define PULL_DWN_CTRL_1 0xfffe1044
212 #define PULL_DWN_CTRL_2 0xfffe1048
213 #define PULL_DWN_CTRL_3 0xfffe104c
214 #define PULL_DWN_CTRL_4 0xfffe10ac
216 /* OMAP-1610 specific multiplexing registers */
217 #define FUNC_MUX_CTRL_E 0xfffe1090
218 #define FUNC_MUX_CTRL_F 0xfffe1094
219 #define FUNC_MUX_CTRL_10 0xfffe1098
220 #define FUNC_MUX_CTRL_11 0xfffe109c
221 #define FUNC_MUX_CTRL_12 0xfffe10a0
222 #define PU_PD_SEL_0 0xfffe10b4
223 #define PU_PD_SEL_1 0xfffe10b8
224 #define PU_PD_SEL_2 0xfffe10bc
225 #define PU_PD_SEL_3 0xfffe10c0
226 #define PU_PD_SEL_4 0xfffe10c4
228 /* Timer32K for 1610 and 1710*/
229 #define OMAP_TIMER32K_BASE 0xFFFBC400
232 * ---------------------------------------------------------------------------
234 * ---------------------------------------------------------------------------
236 #define TIPB_PUBLIC_CNTL_BASE 0xfffed300
237 #define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
238 #define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
239 #define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
242 * ----------------------------------------------------------------------------
244 * ----------------------------------------------------------------------------
246 #define MPUI_BASE (0xfffec900)
247 #define MPUI_CTRL (MPUI_BASE + 0x0)
248 #define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
249 #define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
250 #define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
251 #define MPUI_STATUS_REG (MPUI_BASE + 0x10)
252 #define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
253 #define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
254 #define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
257 * ----------------------------------------------------------------------------
258 * LED Pulse Generator
259 * ----------------------------------------------------------------------------
261 #define OMAP_LPG1_BASE 0xfffbd000
262 #define OMAP_LPG2_BASE 0xfffbd800
263 #define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
264 #define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
265 #define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
266 #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
269 * ----------------------------------------------------------------------------
271 * ----------------------------------------------------------------------------
273 #define OMAP_PWL_BASE 0xfffb5800
274 #define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
275 #define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
278 * ---------------------------------------------------------------------------
279 * Processor specific defines
280 * ---------------------------------------------------------------------------
284 #include "omap1510.h"
285 #include "omap16xx.h"
286 #include "omap24xx.h"
287 #include "omap34xx.h"
289 #ifndef __ASSEMBLER__
292 * ---------------------------------------------------------------------------
293 * Board specific defines
294 * ---------------------------------------------------------------------------
297 #ifdef CONFIG_MACH_OMAP_INNOVATOR
298 #include "board-innovator.h"
301 #ifdef CONFIG_MACH_OMAP_H2
302 #include "board-h2.h"
305 #ifdef CONFIG_MACH_OMAP_PERSEUS2
306 #include "board-perseus2.h"
309 #ifdef CONFIG_MACH_OMAP_FSAMPLE
310 #include "board-fsample.h"
313 #ifdef CONFIG_MACH_OMAP_H3
314 #include "board-h3.h"
317 #ifdef CONFIG_MACH_OMAP_H4
318 #include "board-h4.h"
321 #ifdef CONFIG_MACH_OMAP_2430SDP
322 #include "board-2430sdp.h"
325 #ifdef CONFIG_MACH_OMAP_APOLLON
326 #include "board-apollon.h"
329 #ifdef CONFIG_MACH_OMAP_OSK
330 #include "board-osk.h"
333 #ifdef CONFIG_MACH_VOICEBLUE
334 #include "board-voiceblue.h"
337 #ifdef CONFIG_MACH_OMAP_PALMTE
338 #include "board-palmte.h"
341 #ifdef CONFIG_MACH_OMAP_PALMZ71
342 #include "board-palmz71.h"
345 #ifdef CONFIG_MACH_OMAP_PALMTT
346 #include "board-palmtt.h"
349 #ifdef CONFIG_MACH_SX1
350 #include "board-sx1.h"
353 #endif /* !__ASSEMBLER__ */
355 #endif /* __ASM_ARCH_OMAP_HARDWARE_H */