2 * MMC definitions for OMAP2
4 * Copyright (C) 2006 Nokia Corporation
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
14 #include <linux/types.h>
15 #include <linux/device.h>
16 #include <linux/mmc/host.h>
18 #include <plat/board.h>
20 #define OMAP15XX_NR_MMC 1
21 #define OMAP16XX_NR_MMC 2
22 #define OMAP1_MMC_SIZE 0x080
23 #define OMAP1_MMC1_BASE 0xfffb7800
24 #define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
26 #define OMAP24XX_NR_MMC 2
27 #define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
28 #define OMAP2_MMC1_BASE 0x4809c000
30 #define OMAP4_MMC_REG_OFFSET 0x100
32 #define OMAP_MMC_MAX_SLOTS 2
35 * struct omap_mmc_dev_attr.flags possibilities
37 * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
38 * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
39 * should be set if this is the case. See for example Section 22.5.3
40 * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
41 * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
43 * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
44 * don't work correctly on some MMC controller instances on some
45 * OMAP3 SoCs; this flag should be set if this is the case. See
46 * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
47 * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
48 * Revision F (October 2010) (SPRZ278F).
50 #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
51 #define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
53 struct omap_mmc_dev_attr {
57 struct omap_mmc_platform_data {
58 /* back-link to device */
61 /* number of slots per controller */
64 /* set if your board has components or wiring that limits the
65 * maximum frequency on the MMC bus */
66 unsigned int max_freq;
68 /* switch the bus to a new slot */
69 int (*switch_slot)(struct device *dev, int slot);
70 /* initialize board-specific MMC functionality, can be NULL if
72 int (*init)(struct device *dev);
73 void (*cleanup)(struct device *dev);
74 void (*shutdown)(struct device *dev);
76 /* To handle board related suspend/resume functionality for MMC */
77 int (*suspend)(struct device *dev, int slot);
78 int (*resume)(struct device *dev, int slot);
80 /* Return context loss count due to PM states changing */
81 int (*get_context_loss_count)(struct device *dev);
85 /* Integrating attributes from the omap_hwmod layer */
88 /* Register offset deviation */
91 struct omap_mmc_slot_data {
94 * 4/8 wires and any additional host capabilities
95 * need to OR'd all capabilities (ref. linux/mmc/host.h)
97 u8 wires; /* Used for the MMC driver on omap1 and 2420 */
98 u32 caps; /* Used for the MMC driver on 2430 and later */
101 * nomux means "standard" muxing is wrong on this board, and
102 * that board-specific code handled it before common init logic.
106 /* switch pin can be for card detect (default) or card cover */
109 /* use the internal clock */
110 unsigned internal_clock:1;
112 /* nonremovable e.g. eMMC */
113 unsigned nonremovable:1;
115 /* Try to sleep or power off when possible */
116 unsigned power_saving:1;
118 /* If using power_saving and the MMC power is not to go off */
121 /* eMMC does not handle power off when not in sleep state */
122 unsigned no_regulator_off_init:1;
124 /* Regulator off remapped to sleep */
125 unsigned vcc_aux_disable_is_sleep:1;
127 /* we can put the features above into this variable */
128 #define HSMMC_HAS_PBIAS (1 << 0)
129 #define HSMMC_HAS_UPDATED_RESET (1 << 1)
132 int switch_pin; /* gpio (card detect) */
133 int gpio_wp; /* gpio (write protect) */
135 int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
136 int (*set_power)(struct device *dev, int slot,
137 int power_on, int vdd);
138 int (*get_ro)(struct device *dev, int slot);
139 int (*set_sleep)(struct device *dev, int slot, int sleep,
140 int vdd, int cardsleep);
141 void (*remux)(struct device *dev, int slot, int power_on);
142 /* Call back before enabling / disabling regulators */
143 void (*before_set_reg)(struct device *dev, int slot,
144 int power_on, int vdd);
145 /* Call back after enabling / disabling regulators */
146 void (*after_set_reg)(struct device *dev, int slot,
147 int power_on, int vdd);
148 /* if we have special card, init it using this callback */
149 void (*init_card)(struct mmc_card *card);
151 /* return MMC cover switch state, can be NULL if not supported.
153 * possible return values:
157 int (*get_cover_state)(struct device *dev, int slot);
162 /* Card detection IRQs */
164 int (*card_detect)(struct device *dev, int slot);
166 unsigned int ban_openended:1;
168 } slots[OMAP_MMC_MAX_SLOTS];
171 /* called from board-specific card detection service routine */
172 extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
175 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
176 defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
177 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
179 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
180 int omap_mmc_add(const char *name, int id, unsigned long base,
181 unsigned long size, unsigned int irq,
182 struct omap_mmc_platform_data *data);
184 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
188 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
191 static inline int omap_mmc_add(const char *name, int id, unsigned long base,
192 unsigned long size, unsigned int irq,
193 struct omap_mmc_platform_data *data)