1 # arch/arm/plat-samsung/Kconfig
3 # Copyright 2009 Simtec Electronics
9 depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
13 Base platform code for all Samsung SoC based systems
19 comment "Boot options"
21 config S3C_BOOT_WATCHDOG
22 bool "S3C Initialisation watchdog"
23 depends on S3C2410_WATCHDOG
25 Say y to enable the watchdog during the kernel decompression
26 stage. If the kernel fails to uncompress, then the watchdog
27 will trigger a reset and the system should restart.
29 config S3C_BOOT_ERROR_RESET
30 bool "S3C Reboot on decompression error"
32 Say y here to use the watchdog to reset the system if the
33 kernel decompressor detects an error during decompression.
35 config S3C_BOOT_UART_FORCE_FIFO
36 bool "Force UART FIFO on during boot process"
39 Say Y here to force the UART FIFOs on during the kernel
43 config S3C_LOWLEVEL_UART_PORT
44 int "S3C UART to use for low-level messages"
47 Choice of which UART port to use for the low-level messages,
48 such as the `Uncompressing...` at start time. The value of
49 this configuration should be between zero and two. The port
50 must have been initialised by the boot-loader before use.
57 Select the clock code for the clksrc implementation
58 used by newer systems such as the S3C64XX.
60 # options for IRQ support
62 config SAMSUNG_IRQ_VIC_TIMER
65 Internal configuration to build the VIC timer interrupt code.
67 config SAMSUNG_IRQ_UART
70 Internal configuration to build the IRQ UART demux code.
72 # options for gpio configuration support
74 config SAMSUNG_GPIOLIB_4BIT
77 GPIOlib file contains the 4 bit modification functions for gpio
78 configuration. GPIOlib shall be compiled only for S3C64XX and S5P
81 config S3C_GPIO_CFG_S3C24XX
84 Internal configuration to enable S3C24XX style GPIO configuration
87 config S3C_GPIO_CFG_S3C64XX
90 Internal configuration to enable S3C64XX style GPIO configuration
93 config S3C_GPIO_PULL_UPDOWN
96 Internal configuration to enable the correct GPIO pull helper
98 config S3C_GPIO_PULL_DOWN
101 Internal configuration to enable the correct GPIO pull helper
103 config S3C_GPIO_PULL_UP
106 Internal configuration to enable the correct GPIO pull helper
108 config S5P_GPIO_DRVSTR
111 Internal configuration to get and set correct GPIO driver strength
114 config SAMSUNG_GPIO_EXTRA
115 int "Number of additional GPIO pins"
118 Use additional GPIO space in addition to the GPIO's the SOC
119 provides. This allows expanding the GPIO space for use with
122 config S3C_GPIO_SPACE
123 int "Space between gpio banks"
126 Add a number of spare GPIO entries between each bank for debugging
127 purposes. This allows any problems where an counter overflows from
128 one bank to another to be caught, at the expense of using a little
131 config S3C_GPIO_TRACK
134 Internal configuration option to enable the s3c specific gpio
135 chip tracking if the platform requires it.
140 bool "ADC common driver support"
142 Core support for the ADC block found in the Samsung SoC systems
143 for drivers such as the touchscreen and hwmon to use to share
146 # device definitions to compile in
151 Compile in platform device definitions for HSMMC code
153 config S3C_DEV_HSMMC1
156 Compile in platform device definitions for HSMMC channel 1
158 config S3C_DEV_HSMMC2
161 Compile in platform device definitions for HSMMC channel 2
163 config S3C_DEV_HSMMC3
166 Compile in platform device definitions for HSMMC channel 3
171 Compile in platform device definitions for HWMON
176 Compile in platform device definitions for I2C channel 1
181 Compile in platform device definitions for I2C channel 2
186 Compile in platform device definition for I2C controller 3
191 Compile in platform device definition for I2C controller 4
196 Compile in platform device definition for I2C controller 5
201 Compile in platform device definition for I2C controller 6
206 Compile in platform device definition for I2C controller 7
211 Compile in platform device definition for framebuffer
213 config S3C_DEV_USB_HOST
216 Compile in platform device definition for USB host.
218 config S3C_DEV_USB_HSOTG
221 Compile in platform device definition for USB high-speed OtG
225 default y if ARCH_S3C2410
227 Complie in platform device definition for Watchdog Timer
232 Compile in platform device definition for NAND controller
234 config S3C_DEV_ONENAND
237 Compile in platform device definition for OneNAND controller
242 Complie in platform device definition for RTC
244 config SAMSUNG_DEV_ADC
247 Compile in platform device definition for ADC controller
249 config SAMSUNG_DEV_IDE
252 Compile in platform device definitions for IDE
254 config S3C64XX_DEV_SPI
257 Compile in platform device definitions for S3C64XX's type
260 config SAMSUNG_DEV_TS
263 Common in platform device definitions for touchscreen device
265 config SAMSUNG_DEV_KEYPAD
268 Compile in platform device definitions for keypad
275 Internal configuration for S3C DMA core
281 S3C DMA API Driver for PL330 DMAC.
283 comment "Power management"
285 config SAMSUNG_PM_DEBUG
286 bool "S3C2410 PM Suspend debug"
289 Say Y here if you want verbose debugging from the PM Suspend and
290 Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
291 for more information.
293 config S3C_PM_DEBUG_LED_SMDK
294 bool "SMDK LED suspend/resume debugging"
295 depends on PM && (MACH_SMDK6410)
297 Say Y here to enable the use of the SMDK LEDs on the baseboard
298 for debugging of the state of the suspend and resume process.
300 Note, this currently only works for S3C64XX based SMDK boards.
302 config SAMSUNG_PM_CHECK
303 bool "S3C2410 PM Suspend Memory CRC"
304 depends on PM && CRC32
306 Enable the PM code's memory area checksum over sleep. This option
307 will generate CRCs of all blocks of memory, and store them before
308 going to sleep. The blocks are then checked on resume for any
311 Note, this can take several seconds depending on memory size
314 See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
316 config SAMSUNG_PM_CHECK_CHUNKSIZE
317 int "S3C2410 PM Suspend CRC Chunksize (KiB)"
318 depends on PM && SAMSUNG_PM_CHECK
321 Set the chunksize in Kilobytes of the CRC for checking memory
322 corruption over suspend and resume. A smaller value will mean that
323 the CRC data block will take more memory, but wil identify any
324 faults with better precision.
326 See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
328 config SAMSUNG_WAKEMASK
332 Compile support for wakeup-mask controls found on the S3C6400
333 and above. This code allows a set of interrupt to wakeup-mask
334 mappings. See <plat/wakeup-mask.h>