2 * Devices shared by all Juno boards
5 memtimer: timer@2a810000 {
6 compatible = "arm,armv7-timer-mem";
7 reg = <0x0 0x2a810000 0x0 0x10000>;
8 clock-frequency = <50000000>;
15 interrupts = <0 60 4>;
16 reg = <0x0 0x2a830000 0x0 0x10000>;
20 mailbox: mhu@2b1f0000 {
21 compatible = "arm,mhu", "arm,primecell";
22 reg = <0x0 0x2b1f0000 0x0 0x1000>;
23 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
24 <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
25 interrupt-names = "mhu_lpri_rx",
28 clocks = <&soc_refclk100mhz>;
29 clock-names = "apb_pclk";
32 gic: interrupt-controller@2c010000 {
33 compatible = "arm,gic-400", "arm,cortex-a15-gic";
34 reg = <0x0 0x2c010000 0 0x1000>,
35 <0x0 0x2c02f000 0 0x2000>,
36 <0x0 0x2c04f000 0 0x2000>,
37 <0x0 0x2c06f000 0 0x2000>;
39 #interrupt-cells = <3>;
42 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
43 ranges = <0 0 0 0x2c1c0000 0 0x40000>;
45 compatible = "arm,gic-v2m-frame";
52 compatible = "arm,armv8-timer";
53 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
54 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
55 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
56 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
60 compatible = "arm,juno-sram-ns", "mmio-sram";
61 reg = <0x0 0x2e000000 0x0 0x8000>;
65 ranges = <0 0x0 0x2e000000 0x8000>;
67 cpu_scp_lpri: scp-shmem@0 {
68 compatible = "arm,juno-scp-shmem";
72 cpu_scp_hpri: scp-shmem@200 {
73 compatible = "arm,juno-scp-shmem";
79 compatible = "arm,scpi";
80 mboxes = <&mailbox 1>;
81 shmem = <&cpu_scp_hpri>;
84 compatible = "arm,scpi-clocks";
86 scpi_dvfs: scpi_clocks@0 {
87 compatible = "arm,scpi-dvfs-clocks";
89 clock-indices = <0>, <1>, <2>;
90 clock-output-names = "atlclk", "aplclk","gpuclk";
92 scpi_clk: scpi_clocks@3 {
93 compatible = "arm,scpi-variable-clocks";
96 clock-output-names = "pxlclk";
100 scpi_sensors0: sensors {
101 compatible = "arm,scpi-sensors";
102 #thermal-sensor-cells = <1>;
106 /include/ "juno-clocks.dtsi"
109 compatible = "arm,pl330", "arm,primecell";
110 reg = <0x0 0x7ff00000 0 0x1000>;
113 #dma-requests = <32>;
114 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
115 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
116 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
117 <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
118 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
119 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
120 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
121 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
122 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
123 clocks = <&soc_faxiclk>;
124 clock-names = "apb_pclk";
128 compatible = "arm,hdlcd";
129 reg = <0 0x7ff50000 0 0x1000>;
130 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
131 clocks = <&scpi_clk 3>;
132 clock-names = "pxlclk";
135 hdlcd1_output: endpoint@0 {
136 remote-endpoint = <&tda998x_1_input>;
142 compatible = "arm,hdlcd";
143 reg = <0 0x7ff60000 0 0x1000>;
144 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
145 clocks = <&scpi_clk 3>;
146 clock-names = "pxlclk";
149 hdlcd0_output: endpoint@0 {
150 remote-endpoint = <&tda998x_0_input>;
155 soc_uart0: uart@7ff80000 {
156 compatible = "arm,pl011", "arm,primecell";
157 reg = <0x0 0x7ff80000 0x0 0x1000>;
158 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
160 clock-names = "uartclk", "apb_pclk";
164 compatible = "snps,designware-i2c";
165 reg = <0x0 0x7ffa0000 0x0 0x1000>;
166 #address-cells = <1>;
168 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
169 clock-frequency = <400000>;
170 i2c-sda-hold-time-ns = <500>;
171 clocks = <&soc_smc50mhz>;
173 hdmi-transmitter@70 {
174 compatible = "nxp,tda998x";
177 tda998x_0_input: endpoint@0 {
178 remote-endpoint = <&hdlcd0_output>;
183 hdmi-transmitter@71 {
184 compatible = "nxp,tda998x";
187 tda998x_1_input: endpoint@0 {
188 remote-endpoint = <&hdlcd1_output>;
195 compatible = "generic-ohci";
196 reg = <0x0 0x7ffb0000 0x0 0x10000>;
197 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
198 clocks = <&soc_usb48mhz>;
202 compatible = "generic-ehci";
203 reg = <0x0 0x7ffc0000 0x0 0x10000>;
204 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
205 clocks = <&soc_usb48mhz>;
208 memory-controller@7ffd0000 {
209 compatible = "arm,pl354", "arm,primecell";
210 reg = <0 0x7ffd0000 0 0x1000>;
211 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
212 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
213 clocks = <&soc_smc50mhz>;
214 clock-names = "apb_pclk";
218 device_type = "memory";
219 /* last 16MB of the first memory area is reserved for secure world use by firmware */
220 reg = <0x00000000 0x80000000 0x0 0x7f000000>,
221 <0x00000008 0x80000000 0x1 0x80000000>;
225 compatible = "simple-bus";
226 #address-cells = <2>;
228 ranges = <0 0 0 0x08000000 0x04000000>,
229 <1 0 0 0x14000000 0x04000000>,
230 <2 0 0 0x18000000 0x04000000>,
231 <3 0 0 0x1c000000 0x04000000>,
232 <4 0 0 0x0c000000 0x04000000>,
233 <5 0 0 0x10000000 0x04000000>;
235 #interrupt-cells = <1>;
236 interrupt-map-mask = <0 0 15>;
237 interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>,
238 <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>,
239 <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
240 <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>,
241 <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>,
242 <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>,
243 <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>,
244 <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
245 <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
246 <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>,
247 <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>,
248 <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>,
249 <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>;
251 /include/ "juno-motherboard.dtsi"