2 * SAMSUNG Exynos5433 TM2 board device tree source
4 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6 * Device tree source file for Samsung's TM2 board which is based on
7 * Samsung Exynos5433 SoC.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include "exynos5433.dtsi"
16 #include <dt-bindings/clock/samsung,s2mps11.h>
17 #include <dt-bindings/gpio/gpio.h>
18 #include <dt-bindings/input/input.h>
19 #include <dt-bindings/interrupt-controller/irq.h>
22 model = "Samsung TM2 board";
23 compatible = "samsung,tm2", "samsung,exynos5433";
29 pinctrl0 = &pinctrl_alive;
30 pinctrl1 = &pinctrl_aud;
31 pinctrl2 = &pinctrl_cpif;
32 pinctrl3 = &pinctrl_ese;
33 pinctrl4 = &pinctrl_finger;
34 pinctrl5 = &pinctrl_fsys;
35 pinctrl6 = &pinctrl_imem;
36 pinctrl7 = &pinctrl_nfc;
37 pinctrl8 = &pinctrl_peric;
38 pinctrl9 = &pinctrl_touch;
53 stdout-path = &serial_1;
57 device_type = "memory";
58 reg = <0x0 0x20000000 0x0 0xc0000000>;
62 compatible = "gpio-keys";
65 gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
66 linux,code = <KEY_POWER>;
68 debounce-interval = <10>;
72 gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
73 linux,code = <KEY_VOLUMEUP>;
74 label = "volume-up key";
75 debounce-interval = <10>;
79 gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
80 linux,code = <KEY_VOLUMEDOWN>;
81 label = "volume-down key";
82 debounce-interval = <10>;
86 gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
87 linux,code = <KEY_MENU>;
88 label = "homepage key";
89 debounce-interval = <10>;
93 i2c_max98504: i2c-gpio-0 {
94 compatible = "i2c-gpio";
95 gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */
96 &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >;
97 i2c-gpio,delay-us = <2>;
102 max98504: max98504@31 {
103 compatible = "maxim,max98504";
107 maxim,tx-channel-mask = <3>;
108 maxim,tx-channel-source = <2>;
113 compatible = "samsung,tm2-audio";
114 audio-codec = <&wm5110>;
115 i2s-controller = <&i2s0>;
116 audio-amplifier = <&max98504>;
117 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
119 samsung,audio-routing =
137 vdd-supply = <&ldo3_reg>;
141 compatible = "murata,ncp03wf104";
142 pullup-uv = <1800000>;
143 pullup-ohm = <100000>;
145 io-channels = <&adc 0>;
149 compatible = "murata,ncp03wf104";
150 pullup-uv = <1800000>;
151 pullup-ohm = <100000>;
153 io-channels = <&adc 1>;
154 #thermal-sensor-cells = <0>;
158 compatible = "murata,ncp03wf104";
159 pullup-uv = <1800000>;
160 pullup-ohm = <100000>;
162 io-channels = <&adc 2>;
167 assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>;
168 assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
172 assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
173 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
174 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
175 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
176 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
177 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
178 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
179 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
180 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
181 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
182 assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
183 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
184 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
185 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
186 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
187 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
188 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
189 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
190 assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
191 <66700000>, <66700000>;
195 assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
196 <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
197 assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
198 <&cmu_top CLK_ACLK_GSCL_333>;
202 assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
203 assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
207 assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
208 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
209 <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
210 <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
211 assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
212 <&cmu_top CLK_SCLK_JPEG_MSCL>,
213 <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
214 <&cmu_top CLK_MOUT_BUS_PLL_USER>;
218 cpu-supply = <&buck3_reg>;
222 cpu-supply = <&buck2_reg>;
234 vddcore-supply = <&ldo6_reg>;
235 vddio-supply = <&ldo7_reg>;
236 samsung,pll-clock-frequency = <24000000>;
237 pinctrl-names = "default";
238 pinctrl-0 = <&te_irq>;
241 #address-cells = <1>;
248 samsung,burst-clock-frequency = <512000000>;
249 samsung,esc-clock-frequency = <16000000>;
257 clock-frequency = <2500000>;
260 compatible = "samsung,s2mps13-pmic";
261 interrupt-parent = <&gpa0>;
262 interrupts = <7 IRQ_TYPE_NONE>;
264 samsung,s2mps11-wrstbi-ground;
266 s2mps13_osc: clocks {
267 compatible = "samsung,s2mps13-clk";
269 clock-output-names = "s2mps13_ap", "s2mps13_cp",
275 regulator-name = "VDD_ALIVE_0.9V_AP";
276 regulator-min-microvolt = <900000>;
277 regulator-max-microvolt = <900000>;
282 regulator-name = "VDDQ_MMC2_2.8V_AP";
283 regulator-min-microvolt = <2800000>;
284 regulator-max-microvolt = <2800000>;
286 regulator-state-mem {
287 regulator-off-in-suspend;
292 regulator-name = "VDD1_E_1.8V_AP";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
299 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
300 regulator-min-microvolt = <1300000>;
301 regulator-max-microvolt = <1300000>;
303 regulator-state-mem {
304 regulator-off-in-suspend;
309 regulator-name = "VDD10_DPLL_1.0V_AP";
310 regulator-min-microvolt = <1000000>;
311 regulator-max-microvolt = <1000000>;
313 regulator-state-mem {
314 regulator-off-in-suspend;
319 regulator-name = "VDD10_MIPI2L_1.0V_AP";
320 regulator-min-microvolt = <1000000>;
321 regulator-max-microvolt = <1000000>;
322 regulator-state-mem {
323 regulator-off-in-suspend;
328 regulator-name = "VDD18_MIPI2L_1.8V_AP";
329 regulator-min-microvolt = <1800000>;
330 regulator-max-microvolt = <1800000>;
334 regulator-name = "VDD18_LLI_1.8V_AP";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
338 regulator-state-mem {
339 regulator-off-in-suspend;
344 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
345 regulator-min-microvolt = <1800000>;
346 regulator-max-microvolt = <1800000>;
348 regulator-state-mem {
349 regulator-off-in-suspend;
354 regulator-name = "VDD33_USB30_3.0V_AP";
355 regulator-min-microvolt = <3000000>;
356 regulator-max-microvolt = <3000000>;
357 regulator-state-mem {
358 regulator-off-in-suspend;
363 regulator-name = "VDD_INT_M_1.0V_AP";
364 regulator-min-microvolt = <1000000>;
365 regulator-max-microvolt = <1000000>;
367 regulator-state-mem {
368 regulator-off-in-suspend;
373 regulator-name = "VDD_KFC_M_1.1V_AP";
374 regulator-min-microvolt = <800000>;
375 regulator-max-microvolt = <1350000>;
380 regulator-name = "VDD_G3D_M_0.95V_AP";
381 regulator-min-microvolt = <950000>;
382 regulator-max-microvolt = <950000>;
384 regulator-state-mem {
385 regulator-off-in-suspend;
390 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
391 regulator-min-microvolt = <1200000>;
392 regulator-max-microvolt = <1200000>;
394 regulator-state-mem {
395 regulator-off-in-suspend;
400 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
401 regulator-min-microvolt = <1200000>;
402 regulator-max-microvolt = <1200000>;
404 regulator-state-mem {
405 regulator-off-in-suspend;
410 regulator-name = "VDDQ_EFUSE";
411 regulator-min-microvolt = <1400000>;
412 regulator-max-microvolt = <3400000>;
417 regulator-name = "V_TFLASH_2.8V_AP";
418 regulator-min-microvolt = <2800000>;
419 regulator-max-microvolt = <2800000>;
423 regulator-name = "V_CODEC_1.8V_AP";
424 regulator-min-microvolt = <1800000>;
425 regulator-max-microvolt = <1800000>;
429 regulator-name = "VDDA_1.8V_COMP";
430 regulator-min-microvolt = <1800000>;
431 regulator-max-microvolt = <1800000>;
436 regulator-name = "VCC_2.8V_AP";
437 regulator-min-microvolt = <2800000>;
438 regulator-max-microvolt = <2800000>;
443 regulator-name = "VT_CAM_1.8V";
444 regulator-min-microvolt = <1800000>;
445 regulator-max-microvolt = <1800000>;
449 regulator-name = "CAM_IO_1.8V_AP";
450 regulator-min-microvolt = <1800000>;
451 regulator-max-microvolt = <1800000>;
455 regulator-name = "CAM_SEN_CORE_1.2V_AP";
456 regulator-min-microvolt = <1050000>;
457 regulator-max-microvolt = <1200000>;
461 regulator-name = "VT_CAM_1.2V";
462 regulator-min-microvolt = <1200000>;
463 regulator-max-microvolt = <1200000>;
467 regulator-name = "CAM_SEN_A2.8V_AP";
468 regulator-min-microvolt = <2800000>;
469 regulator-max-microvolt = <2800000>;
473 regulator-name = "CAM_AF_2.8V_AP";
474 regulator-min-microvolt = <2800000>;
475 regulator-max-microvolt = <2800000>;
479 regulator-name = "VCC_3.0V_LCD_AP";
480 regulator-min-microvolt = <3000000>;
481 regulator-max-microvolt = <3000000>;
485 regulator-name = "VCC_1.8V_LCD_AP";
486 regulator-min-microvolt = <1800000>;
487 regulator-max-microvolt = <1800000>;
491 regulator-name = "VT_CAM_2.8V";
492 regulator-min-microvolt = <3000000>;
493 regulator-max-microvolt = <3000000>;
497 regulator-name = "TSP_AVDD_3.3V_AP";
498 regulator-min-microvolt = <3300000>;
499 regulator-max-microvolt = <3300000>;
503 regulator-name = "TSP_VDD_1.85V_AP";
504 regulator-min-microvolt = <1850000>;
505 regulator-max-microvolt = <1850000>;
509 regulator-name = "VTOUCH_1.8V_AP";
510 regulator-min-microvolt = <1800000>;
511 regulator-max-microvolt = <1800000>;
515 regulator-name = "VTOUCH_LED_3.3V";
516 regulator-min-microvolt = <2500000>;
517 regulator-max-microvolt = <3300000>;
518 regulator-ramp-delay = <12500>;
522 regulator-name = "VCC_1.8V_MHL_AP";
523 regulator-min-microvolt = <1000000>;
524 regulator-max-microvolt = <2100000>;
528 regulator-name = "OIS_VM_2.8V";
529 regulator-min-microvolt = <1800000>;
530 regulator-max-microvolt = <2800000>;
534 regulator-name = "VSIL_1.0V";
535 regulator-min-microvolt = <1000000>;
536 regulator-max-microvolt = <1000000>;
540 regulator-name = "VF_1.8V";
541 regulator-min-microvolt = <1800000>;
542 regulator-max-microvolt = <1800000>;
546 regulator-name = "VCC_3.0V_MOTOR_AP";
547 regulator-min-microvolt = <3000000>;
548 regulator-max-microvolt = <3000000>;
552 regulator-name = "V_HRM_1.8V";
553 regulator-min-microvolt = <1800000>;
554 regulator-max-microvolt = <1800000>;
558 regulator-name = "V_HRM_3.3V";
559 regulator-min-microvolt = <3300000>;
560 regulator-max-microvolt = <3300000>;
564 regulator-name = "VDD_MIF_0.9V_AP";
565 regulator-min-microvolt = <600000>;
566 regulator-max-microvolt = <1500000>;
568 regulator-state-mem {
569 regulator-off-in-suspend;
574 regulator-name = "VDD_EGL_1.0V_AP";
575 regulator-min-microvolt = <900000>;
576 regulator-max-microvolt = <1300000>;
578 regulator-state-mem {
579 regulator-off-in-suspend;
584 regulator-name = "VDD_KFC_1.0V_AP";
585 regulator-min-microvolt = <800000>;
586 regulator-max-microvolt = <1200000>;
588 regulator-state-mem {
589 regulator-off-in-suspend;
594 regulator-name = "VDD_INT_0.95V_AP";
595 regulator-min-microvolt = <600000>;
596 regulator-max-microvolt = <1500000>;
598 regulator-state-mem {
599 regulator-off-in-suspend;
604 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
605 regulator-min-microvolt = <600000>;
606 regulator-max-microvolt = <1500000>;
608 regulator-state-mem {
609 regulator-off-in-suspend;
614 regulator-name = "VDD_G3D_0.9V_AP";
615 regulator-min-microvolt = <600000>;
616 regulator-max-microvolt = <1500000>;
618 regulator-state-mem {
619 regulator-off-in-suspend;
624 regulator-name = "VDD_MEM1_1.2V_AP";
625 regulator-min-microvolt = <1200000>;
626 regulator-max-microvolt = <1200000>;
631 regulator-name = "VDD_LLDO_1.35V_AP";
632 regulator-min-microvolt = <1350000>;
633 regulator-max-microvolt = <3300000>;
638 regulator-name = "VDD_MLDO_2.0V_AP";
639 regulator-min-microvolt = <1350000>;
640 regulator-max-microvolt = <3300000>;
645 regulator-name = "vdd_mem2";
646 regulator-min-microvolt = <550000>;
647 regulator-max-microvolt = <1500000>;
658 compatible = "maxim,max77843";
659 interrupt-parent = <&gpa1>;
660 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
663 muic: max77843-muic {
664 compatible = "maxim,max77843-muic";
668 compatible = "maxim,max77843-regulator";
669 safeout1_reg: SAFEOUT1 {
670 regulator-name = "SAFEOUT1";
671 regulator-min-microvolt = <3300000>;
672 regulator-max-microvolt = <4950000>;
675 safeout2_reg: SAFEOUT2 {
676 regulator-name = "SAFEOUT2";
677 regulator-min-microvolt = <3300000>;
678 regulator-max-microvolt = <4950000>;
681 charger_reg: CHARGER {
682 regulator-name = "CHARGER";
683 regulator-min-microamp = <100000>;
684 regulator-max-microamp = <3150000>;
688 haptic: max77843-haptic {
689 compatible = "maxim,max77843-haptic";
690 haptic-supply = <&ldo38_reg>;
691 pwms = <&pwm 0 33670 0>;
692 pwm-names = "haptic";
708 card-detect-delay = <200>;
709 samsung,dw-mshc-ciu-div = <3>;
710 samsung,dw-mshc-sdr-timing = <0 4>;
711 samsung,dw-mshc-ddr-timing = <0 2>;
712 samsung,dw-mshc-hs400-timing = <0 3>;
713 samsung,read-strobe-delay = <90>;
715 pinctrl-names = "default";
716 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
717 &sd0_bus8 &sd0_rdqs>;
719 assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
720 assigned-clock-rates = <800000000>;
728 cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
730 card-detect-delay = <200>;
731 samsung,dw-mshc-ciu-div = <3>;
732 samsung,dw-mshc-sdr-timing = <0 4>;
733 samsung,dw-mshc-ddr-timing = <0 2>;
735 pinctrl-names = "default";
736 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
741 pinctrl-names = "default";
742 pinctrl-0 = <&initial_alive>;
744 initial_alive: initial-state {
745 PIN(IN, gpa0-0, DOWN, LV1);
746 PIN(IN, gpa0-1, NONE, LV1);
747 PIN(IN, gpa0-2, DOWN, LV1);
748 PIN(IN, gpa0-3, NONE, LV1);
749 PIN(IN, gpa0-4, NONE, LV1);
750 PIN(IN, gpa0-5, DOWN, LV1);
751 PIN(IN, gpa0-6, NONE, LV1);
752 PIN(IN, gpa0-7, NONE, LV1);
754 PIN(IN, gpa1-0, UP, LV1);
755 PIN(IN, gpa1-1, NONE, LV1);
756 PIN(IN, gpa1-2, NONE, LV1);
757 PIN(IN, gpa1-3, DOWN, LV1);
758 PIN(IN, gpa1-4, DOWN, LV1);
759 PIN(IN, gpa1-5, NONE, LV1);
760 PIN(IN, gpa1-6, NONE, LV1);
761 PIN(IN, gpa1-7, NONE, LV1);
763 PIN(IN, gpa2-0, NONE, LV1);
764 PIN(IN, gpa2-1, NONE, LV1);
765 PIN(IN, gpa2-2, NONE, LV1);
766 PIN(IN, gpa2-3, DOWN, LV1);
767 PIN(IN, gpa2-4, NONE, LV1);
768 PIN(IN, gpa2-5, DOWN, LV1);
769 PIN(IN, gpa2-6, DOWN, LV1);
770 PIN(IN, gpa2-7, NONE, LV1);
772 PIN(IN, gpa3-0, DOWN, LV1);
773 PIN(IN, gpa3-1, DOWN, LV1);
774 PIN(IN, gpa3-2, NONE, LV1);
775 PIN(IN, gpa3-3, DOWN, LV1);
776 PIN(IN, gpa3-4, NONE, LV1);
777 PIN(IN, gpa3-5, DOWN, LV1);
778 PIN(IN, gpa3-6, DOWN, LV1);
779 PIN(IN, gpa3-7, DOWN, LV1);
781 PIN(IN, gpf1-0, NONE, LV1);
782 PIN(IN, gpf1-1, NONE, LV1);
783 PIN(IN, gpf1-2, DOWN, LV1);
784 PIN(IN, gpf1-4, UP, LV1);
785 PIN(OUT, gpf1-5, NONE, LV1);
786 PIN(IN, gpf1-6, DOWN, LV1);
787 PIN(IN, gpf1-7, DOWN, LV1);
789 PIN(IN, gpf2-0, DOWN, LV1);
790 PIN(IN, gpf2-1, DOWN, LV1);
791 PIN(IN, gpf2-2, DOWN, LV1);
792 PIN(IN, gpf2-3, DOWN, LV1);
794 PIN(IN, gpf3-0, DOWN, LV1);
795 PIN(IN, gpf3-1, DOWN, LV1);
796 PIN(IN, gpf3-2, NONE, LV1);
797 PIN(IN, gpf3-3, DOWN, LV1);
799 PIN(IN, gpf4-0, DOWN, LV1);
800 PIN(IN, gpf4-1, DOWN, LV1);
801 PIN(IN, gpf4-2, DOWN, LV1);
802 PIN(IN, gpf4-3, DOWN, LV1);
803 PIN(IN, gpf4-4, DOWN, LV1);
804 PIN(IN, gpf4-5, DOWN, LV1);
805 PIN(IN, gpf4-6, DOWN, LV1);
806 PIN(IN, gpf4-7, DOWN, LV1);
808 PIN(IN, gpf5-0, DOWN, LV1);
809 PIN(IN, gpf5-1, DOWN, LV1);
810 PIN(IN, gpf5-2, DOWN, LV1);
811 PIN(IN, gpf5-3, DOWN, LV1);
812 PIN(OUT, gpf5-4, NONE, LV1);
813 PIN(IN, gpf5-5, DOWN, LV1);
814 PIN(IN, gpf5-6, DOWN, LV1);
815 PIN(IN, gpf5-7, DOWN, LV1);
819 samsung,pins = "gpf1-3";
820 samsung,pin-function = <0xf>;
825 pinctrl-names = "default";
826 pinctrl-0 = <&initial_cpif>;
828 initial_cpif: initial-state {
829 PIN(IN, gpv6-0, DOWN, LV1);
830 PIN(IN, gpv6-1, DOWN, LV1);
835 pinctrl-names = "default";
836 pinctrl-0 = <&initial_ese>;
838 initial_ese: initial-state {
839 PIN(IN, gpj2-0, DOWN, LV1);
840 PIN(IN, gpj2-1, DOWN, LV1);
841 PIN(IN, gpj2-2, DOWN, LV1);
846 pinctrl-names = "default";
847 pinctrl-0 = <&initial_fsys>;
849 initial_fsys: initial-state {
850 PIN(IN, gpr3-0, NONE, LV1);
851 PIN(IN, gpr3-1, DOWN, LV1);
852 PIN(IN, gpr3-2, DOWN, LV1);
853 PIN(IN, gpr3-3, DOWN, LV1);
854 PIN(IN, gpr3-7, NONE, LV1);
859 pinctrl-names = "default";
860 pinctrl-0 = <&initial_imem>;
862 initial_imem: initial-state {
863 PIN(IN, gpf0-0, UP, LV1);
864 PIN(IN, gpf0-1, UP, LV1);
865 PIN(IN, gpf0-2, DOWN, LV1);
866 PIN(IN, gpf0-3, UP, LV1);
867 PIN(IN, gpf0-4, DOWN, LV1);
868 PIN(IN, gpf0-5, NONE, LV1);
869 PIN(IN, gpf0-6, DOWN, LV1);
870 PIN(IN, gpf0-7, UP, LV1);
875 pinctrl-names = "default";
876 pinctrl-0 = <&initial_nfc>;
878 initial_nfc: initial-state {
879 PIN(IN, gpj0-2, DOWN, LV1);
884 pinctrl-names = "default";
885 pinctrl-0 = <&initial_peric>;
887 initial_peric: initial-state {
888 PIN(IN, gpv7-0, DOWN, LV1);
889 PIN(IN, gpv7-1, DOWN, LV1);
890 PIN(IN, gpv7-2, NONE, LV1);
891 PIN(IN, gpv7-3, DOWN, LV1);
892 PIN(IN, gpv7-4, DOWN, LV1);
893 PIN(IN, gpv7-5, DOWN, LV1);
895 PIN(IN, gpb0-4, DOWN, LV1);
897 PIN(IN, gpc0-2, DOWN, LV1);
898 PIN(IN, gpc0-5, DOWN, LV1);
899 PIN(IN, gpc0-7, DOWN, LV1);
901 PIN(IN, gpc1-1, DOWN, LV1);
903 PIN(IN, gpc3-4, NONE, LV1);
904 PIN(IN, gpc3-5, NONE, LV1);
905 PIN(IN, gpc3-6, NONE, LV1);
906 PIN(IN, gpc3-7, NONE, LV1);
908 PIN(OUT, gpg0-0, NONE, LV1);
909 PIN(FUNC1, gpg0-1, DOWN, LV1);
911 PIN(IN, gpd2-5, DOWN, LV1);
913 PIN(IN, gpd4-0, NONE, LV1);
914 PIN(IN, gpd4-1, DOWN, LV1);
915 PIN(IN, gpd4-2, DOWN, LV1);
916 PIN(IN, gpd4-3, DOWN, LV1);
917 PIN(IN, gpd4-4, DOWN, LV1);
919 PIN(IN, gpd6-3, DOWN, LV1);
921 PIN(IN, gpd8-1, UP, LV1);
923 PIN(IN, gpg1-0, DOWN, LV1);
924 PIN(IN, gpg1-1, DOWN, LV1);
925 PIN(IN, gpg1-2, DOWN, LV1);
926 PIN(IN, gpg1-3, DOWN, LV1);
927 PIN(IN, gpg1-4, DOWN, LV1);
929 PIN(IN, gpg2-0, DOWN, LV1);
930 PIN(IN, gpg2-1, DOWN, LV1);
932 PIN(IN, gpg3-0, DOWN, LV1);
933 PIN(IN, gpg3-1, DOWN, LV1);
934 PIN(IN, gpg3-5, DOWN, LV1);
935 PIN(IN, gpg3-7, DOWN, LV1);
940 pinctrl-names = "default";
941 pinctrl-0 = <&initial_touch>;
943 initial_touch: initial-state {
944 PIN(IN, gpj1-2, DOWN, LV1);
949 pinctrl-0 = <&pwm0_out>;
950 pinctrl-names = "default";
961 &pmu_system_controller {
962 assigned-clocks = <&pmu_system_controller 0>;
963 assigned-clock-parents = <&xxti>;
971 cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
974 wm5110: wm5110-codec@0 {
975 compatible = "wlf,wm5110";
977 spi-max-frequency = <20000000>;
978 interrupt-parent = <&gpa0>;
979 interrupts = <4 IRQ_TYPE_NONE>;
980 clocks = <&pmu_system_controller 0>,
981 <&s2mps13_osc S2MPS11_CLK_BT>;
982 clock-names = "mclk1", "mclk2";
987 wlf,micd-detect-debounce = <300>;
988 wlf,micd-bias-start-time = <0x1>;
989 wlf,micd-rate = <0x7>;
990 wlf,micd-dbtime = <0x1>;
991 wlf,micd-force-micbias;
992 wlf,micd-configs = <0x0 1 0>;
993 wlf,hpdet-channel = <1>;
995 wlf,inmode = <2 0 2 0>;
997 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
998 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1001 AVDD-supply = <&ldo18_reg>;
1002 DBVDD1-supply = <&ldo18_reg>;
1003 CPVDD-supply = <&ldo18_reg>;
1004 DBVDD2-supply = <&ldo18_reg>;
1005 DBVDD3-supply = <&ldo18_reg>;
1008 samsung,spi-feedback-delay = <0>;
1014 clock-frequency = <24000000>;
1018 vtmu-supply = <&ldo3_reg>;
1023 vtmu-supply = <&ldo3_reg>;
1028 vtmu-supply = <&ldo3_reg>;
1033 vdd33-supply = <&ldo10_reg>;
1034 vdd10-supply = <&ldo6_reg>;
1043 vbus-supply = <&safeout1_reg>;
1048 clock-frequency = <24000000>;