2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2008-2009 Bluetechnix
4 * 2005 National ICT Australia (NICTA)
5 * Aidan Williams <aidan@nicta.com.au>
7 * Licensed under the GPL-2 or later.
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/mtd/physmap.h>
15 #include <linux/spi/spi.h>
16 #include <linux/spi/flash.h>
17 #include <linux/etherdevice.h>
18 #include <linux/i2c.h>
19 #include <linux/irq.h>
20 #include <linux/interrupt.h>
21 #include <linux/usb/musb.h>
23 #include <asm/bfin5xx_spi.h>
24 #include <asm/reboot.h>
26 #include <asm/portmux.h>
28 #include <linux/spi/ad7877.h>
31 * Name the Board for the /proc/cpuinfo
33 const char bfin_board_name[] = "Bluetechnix CM-BF527";
36 * Driver needs to know address, irq and flag pin.
39 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
40 #include <linux/usb/isp1760.h>
41 static struct resource bfin_isp1760_resources[] = {
44 .end = 0x203C0000 + 0x000fffff,
45 .flags = IORESOURCE_MEM,
50 .flags = IORESOURCE_IRQ,
54 static struct isp1760_platform_data isp1760_priv = {
59 .dack_polarity_high = 0,
60 .dreq_polarity_high = 0,
63 static struct platform_device bfin_isp1760_device = {
67 .platform_data = &isp1760_priv,
69 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
70 .resource = bfin_isp1760_resources,
74 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
75 static struct resource musb_resources[] = {
79 .flags = IORESOURCE_MEM,
81 [1] = { /* general IRQ */
82 .start = IRQ_USB_INT0,
84 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
90 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
95 static struct musb_hdrc_config musb_config = {
102 .gpio_vrsel = GPIO_PF11,
103 /* Some custom boards need to be active low, just set it to "0"
106 .gpio_vrsel_active = 1,
107 .clkin = 24, /* musb CLKIN in MHZ */
110 static struct musb_hdrc_platform_data musb_plat = {
111 #if defined(CONFIG_USB_MUSB_OTG)
113 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
115 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
116 .mode = MUSB_PERIPHERAL,
118 .config = &musb_config,
121 static u64 musb_dmamask = ~(u32)0;
123 static struct platform_device musb_device = {
124 .name = "musb-blackfin",
127 .dma_mask = &musb_dmamask,
128 .coherent_dma_mask = 0xffffffff,
129 .platform_data = &musb_plat,
131 .num_resources = ARRAY_SIZE(musb_resources),
132 .resource = musb_resources,
136 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
137 static struct mtd_partition partition_info[] = {
139 .name = "linux kernel(nand)",
141 .size = 4 * 1024 * 1024,
144 .name = "file system(nand)",
145 .offset = MTDPART_OFS_APPEND,
146 .size = MTDPART_SIZ_FULL,
150 static struct bf5xx_nand_platform bf5xx_nand_platform = {
151 .data_width = NFC_NWIDTH_8,
152 .partitions = partition_info,
153 .nr_partitions = ARRAY_SIZE(partition_info),
158 static struct resource bf5xx_nand_resources[] = {
161 .end = NFC_DATA_RD + 2,
162 .flags = IORESOURCE_MEM,
167 .flags = IORESOURCE_IRQ,
171 static struct platform_device bf5xx_nand_device = {
172 .name = "bf5xx-nand",
174 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
175 .resource = bf5xx_nand_resources,
177 .platform_data = &bf5xx_nand_platform,
182 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
183 static struct resource bfin_pcmcia_cf_resources[] = {
185 .start = 0x20310000, /* IO PORT */
187 .flags = IORESOURCE_MEM,
189 .start = 0x20311000, /* Attribute Memory */
191 .flags = IORESOURCE_MEM,
195 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
197 .start = 6, /* Card Detect PF6 */
199 .flags = IORESOURCE_IRQ,
203 static struct platform_device bfin_pcmcia_cf_device = {
204 .name = "bfin_cf_pcmcia",
206 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
207 .resource = bfin_pcmcia_cf_resources,
211 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
212 static struct platform_device rtc_device = {
218 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
219 #include <linux/smc91x.h>
221 static struct smc91x_platdata smc91x_info = {
222 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
223 .leda = RPC_LED_100_10,
224 .ledb = RPC_LED_TX_RX,
227 static struct resource smc91x_resources[] = {
229 .name = "smc91x-regs",
231 .end = 0x20300300 + 16,
232 .flags = IORESOURCE_MEM,
237 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
240 static struct platform_device smc91x_device = {
243 .num_resources = ARRAY_SIZE(smc91x_resources),
244 .resource = smc91x_resources,
246 .platform_data = &smc91x_info,
251 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
252 static struct resource dm9000_resources[] = {
255 .end = 0x203FB800 + 1,
256 .flags = IORESOURCE_MEM,
260 .end = 0x203FB804 + 1,
261 .flags = IORESOURCE_MEM,
266 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
270 static struct platform_device dm9000_device = {
273 .num_resources = ARRAY_SIZE(dm9000_resources),
274 .resource = dm9000_resources,
278 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
279 #include <linux/bfin_mac.h>
280 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
282 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
285 .irq = IRQ_MAC_PHYINT,
289 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
291 .phydev_data = bfin_phydev_data,
292 .phy_mode = PHY_INTERFACE_MODE_RMII,
293 .mac_peripherals = bfin_mac_peripherals,
296 static struct platform_device bfin_mii_bus = {
297 .name = "bfin_mii_bus",
299 .platform_data = &bfin_mii_bus_data,
303 static struct platform_device bfin_mac_device = {
306 .platform_data = &bfin_mii_bus,
311 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
312 static struct resource net2272_bfin_resources[] = {
315 .end = 0x20300000 + 0x100,
316 .flags = IORESOURCE_MEM,
320 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
324 static struct platform_device net2272_bfin_device = {
327 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
328 .resource = net2272_bfin_resources,
332 #if defined(CONFIG_MTD_M25P80) \
333 || defined(CONFIG_MTD_M25P80_MODULE)
334 static struct mtd_partition bfin_spi_flash_partitions[] = {
336 .name = "bootloader(spi)",
339 .mask_flags = MTD_CAP_ROM
341 .name = "linux kernel(spi)",
342 .size = MTDPART_SIZ_FULL,
343 .offset = MTDPART_OFS_APPEND,
347 static struct flash_platform_data bfin_spi_flash_data = {
349 .parts = bfin_spi_flash_partitions,
350 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
354 /* SPI flash chip (m25p64) */
355 static struct bfin5xx_spi_chip spi_flash_chip_info = {
356 .enable_dma = 0, /* use dma transfer with this chip*/
361 #if defined(CONFIG_BFIN_SPI_ADC) \
362 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
364 static struct bfin5xx_spi_chip spi_adc_chip_info = {
365 .enable_dma = 1, /* use dma transfer with this chip*/
370 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
371 || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
372 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
378 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
379 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
385 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
386 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
391 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
393 .vref_delay_usecs = 50, /* internal, no capacitor */
396 .pressure_max = 1000,
398 .stopacq_polarity = 1,
399 .first_conversion_delay = 3,
400 .acquisition_time = 1,
402 .pen_down_acc_interval = 1,
406 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
407 && defined(CONFIG_SND_SOC_WM8731_SPI)
408 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
414 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
415 static struct bfin5xx_spi_chip spidev_chip_info = {
421 static struct spi_board_info bfin_spi_board_info[] __initdata = {
422 #if defined(CONFIG_MTD_M25P80) \
423 || defined(CONFIG_MTD_M25P80_MODULE)
425 /* the modalias must be the same as spi device driver name */
426 .modalias = "m25p80", /* Name of spi_driver for this device */
427 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
428 .bus_num = 0, /* Framework bus number */
429 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
430 .platform_data = &bfin_spi_flash_data,
431 .controller_data = &spi_flash_chip_info,
436 #if defined(CONFIG_BFIN_SPI_ADC) \
437 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
439 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
440 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
441 .bus_num = 0, /* Framework bus number */
442 .chip_select = 1, /* Framework chip select. */
443 .platform_data = NULL, /* No spi_driver specific config */
444 .controller_data = &spi_adc_chip_info,
448 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
449 || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
451 .modalias = "ad183x",
452 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
455 .controller_data = &ad1836_spi_chip_info,
458 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
460 .modalias = "mmc_spi",
461 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
464 .controller_data = &mmc_spi_chip_info,
468 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
470 .modalias = "ad7877",
471 .platform_data = &bfin_ad7877_ts_info,
473 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
476 .controller_data = &spi_ad7877_chip_info,
479 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
480 && defined(CONFIG_SND_SOC_WM8731_SPI)
482 .modalias = "wm8731",
483 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
486 .controller_data = &spi_wm8731_chip_info,
490 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
492 .modalias = "spidev",
493 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
496 .controller_data = &spidev_chip_info,
501 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
502 /* SPI controller data */
503 static struct bfin5xx_spi_master bfin_spi0_info = {
505 .enable_dma = 1, /* master has the ability to do dma transfer */
506 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
510 static struct resource bfin_spi0_resource[] = {
512 .start = SPI0_REGBASE,
513 .end = SPI0_REGBASE + 0xFF,
514 .flags = IORESOURCE_MEM,
519 .flags = IORESOURCE_DMA,
524 .flags = IORESOURCE_IRQ,
528 static struct platform_device bfin_spi0_device = {
530 .id = 0, /* Bus number */
531 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
532 .resource = bfin_spi0_resource,
534 .platform_data = &bfin_spi0_info, /* Passed to driver */
537 #endif /* spi master and devices */
539 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
540 static struct mtd_partition cm_partitions[] = {
542 .name = "bootloader(nor)",
546 .name = "linux kernel(nor)",
548 .offset = MTDPART_OFS_APPEND,
550 .name = "file system(nor)",
551 .size = MTDPART_SIZ_FULL,
552 .offset = MTDPART_OFS_APPEND,
556 static struct physmap_flash_data cm_flash_data = {
558 .parts = cm_partitions,
559 .nr_parts = ARRAY_SIZE(cm_partitions),
562 static unsigned cm_flash_gpios[] = { GPIO_PH9, GPIO_PG11 };
564 static struct resource cm_flash_resource[] = {
569 .flags = IORESOURCE_MEM,
571 .start = (unsigned long)cm_flash_gpios,
572 .end = ARRAY_SIZE(cm_flash_gpios),
573 .flags = IORESOURCE_IRQ,
577 static struct platform_device cm_flash_device = {
578 .name = "gpio-addr-flash",
581 .platform_data = &cm_flash_data,
583 .num_resources = ARRAY_SIZE(cm_flash_resource),
584 .resource = cm_flash_resource,
588 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
589 #ifdef CONFIG_SERIAL_BFIN_UART0
590 static struct resource bfin_uart0_resources[] = {
594 .flags = IORESOURCE_MEM,
597 .start = IRQ_UART0_RX,
598 .end = IRQ_UART0_RX+1,
599 .flags = IORESOURCE_IRQ,
602 .start = IRQ_UART0_ERROR,
603 .end = IRQ_UART0_ERROR,
604 .flags = IORESOURCE_IRQ,
607 .start = CH_UART0_TX,
609 .flags = IORESOURCE_DMA,
612 .start = CH_UART0_RX,
614 .flags = IORESOURCE_DMA,
618 static unsigned short bfin_uart0_peripherals[] = {
619 P_UART0_TX, P_UART0_RX, 0
622 static struct platform_device bfin_uart0_device = {
625 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
626 .resource = bfin_uart0_resources,
628 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
632 #ifdef CONFIG_SERIAL_BFIN_UART1
633 static struct resource bfin_uart1_resources[] = {
637 .flags = IORESOURCE_MEM,
640 .start = IRQ_UART1_RX,
641 .end = IRQ_UART1_RX+1,
642 .flags = IORESOURCE_IRQ,
645 .start = IRQ_UART1_ERROR,
646 .end = IRQ_UART1_ERROR,
647 .flags = IORESOURCE_IRQ,
650 .start = CH_UART1_TX,
652 .flags = IORESOURCE_DMA,
655 .start = CH_UART1_RX,
657 .flags = IORESOURCE_DMA,
659 #ifdef CONFIG_BFIN_UART1_CTSRTS
663 .flags = IORESOURCE_IO,
668 .flags = IORESOURCE_IO,
673 static unsigned short bfin_uart1_peripherals[] = {
674 P_UART1_TX, P_UART1_RX, 0
677 static struct platform_device bfin_uart1_device = {
680 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
681 .resource = bfin_uart1_resources,
683 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
689 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
690 #ifdef CONFIG_BFIN_SIR0
691 static struct resource bfin_sir0_resources[] = {
695 .flags = IORESOURCE_MEM,
698 .start = IRQ_UART0_RX,
699 .end = IRQ_UART0_RX+1,
700 .flags = IORESOURCE_IRQ,
703 .start = CH_UART0_RX,
704 .end = CH_UART0_RX+1,
705 .flags = IORESOURCE_DMA,
709 static struct platform_device bfin_sir0_device = {
712 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
713 .resource = bfin_sir0_resources,
716 #ifdef CONFIG_BFIN_SIR1
717 static struct resource bfin_sir1_resources[] = {
721 .flags = IORESOURCE_MEM,
724 .start = IRQ_UART1_RX,
725 .end = IRQ_UART1_RX+1,
726 .flags = IORESOURCE_IRQ,
729 .start = CH_UART1_RX,
730 .end = CH_UART1_RX+1,
731 .flags = IORESOURCE_DMA,
735 static struct platform_device bfin_sir1_device = {
738 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
739 .resource = bfin_sir1_resources,
744 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
745 static struct resource bfin_twi0_resource[] = {
747 .start = TWI0_REGBASE,
749 .flags = IORESOURCE_MEM,
754 .flags = IORESOURCE_IRQ,
758 static struct platform_device i2c_bfin_twi_device = {
759 .name = "i2c-bfin-twi",
761 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
762 .resource = bfin_twi0_resource,
766 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
767 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
769 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
772 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
774 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
778 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
780 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
785 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
786 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
787 static struct resource bfin_sport0_uart_resources[] = {
789 .start = SPORT0_TCR1,
790 .end = SPORT0_MRCS3+4,
791 .flags = IORESOURCE_MEM,
794 .start = IRQ_SPORT0_RX,
795 .end = IRQ_SPORT0_RX+1,
796 .flags = IORESOURCE_IRQ,
799 .start = IRQ_SPORT0_ERROR,
800 .end = IRQ_SPORT0_ERROR,
801 .flags = IORESOURCE_IRQ,
805 static unsigned short bfin_sport0_peripherals[] = {
806 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
807 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
810 static struct platform_device bfin_sport0_uart_device = {
811 .name = "bfin-sport-uart",
813 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
814 .resource = bfin_sport0_uart_resources,
816 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
820 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
821 static struct resource bfin_sport1_uart_resources[] = {
823 .start = SPORT1_TCR1,
824 .end = SPORT1_MRCS3+4,
825 .flags = IORESOURCE_MEM,
828 .start = IRQ_SPORT1_RX,
829 .end = IRQ_SPORT1_RX+1,
830 .flags = IORESOURCE_IRQ,
833 .start = IRQ_SPORT1_ERROR,
834 .end = IRQ_SPORT1_ERROR,
835 .flags = IORESOURCE_IRQ,
839 static unsigned short bfin_sport1_peripherals[] = {
840 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
841 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
844 static struct platform_device bfin_sport1_uart_device = {
845 .name = "bfin-sport-uart",
847 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
848 .resource = bfin_sport1_uart_resources,
850 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
856 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
857 #include <linux/input.h>
858 #include <linux/gpio_keys.h>
860 static struct gpio_keys_button bfin_gpio_keys_table[] = {
861 {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
864 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
865 .buttons = bfin_gpio_keys_table,
866 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
869 static struct platform_device bfin_device_gpiokeys = {
872 .platform_data = &bfin_gpio_keys_data,
877 static const unsigned int cclk_vlev_datasheet[] =
879 VRPAIR(VLEV_100, 400000000),
880 VRPAIR(VLEV_105, 426000000),
881 VRPAIR(VLEV_110, 500000000),
882 VRPAIR(VLEV_115, 533000000),
883 VRPAIR(VLEV_120, 600000000),
886 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
887 .tuple_tab = cclk_vlev_datasheet,
888 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
889 .vr_settling_time = 25 /* us */,
892 static struct platform_device bfin_dpmc = {
895 .platform_data = &bfin_dmpc_vreg_data,
899 static struct platform_device *cmbf527_devices[] __initdata = {
903 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
907 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
908 &bfin_pcmcia_cf_device,
911 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
915 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
916 &bfin_isp1760_device,
919 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
923 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
927 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
931 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
936 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
937 &net2272_bfin_device,
940 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
944 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
945 #ifdef CONFIG_SERIAL_BFIN_UART0
948 #ifdef CONFIG_SERIAL_BFIN_UART1
953 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
954 #ifdef CONFIG_BFIN_SIR0
957 #ifdef CONFIG_BFIN_SIR1
962 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
963 &i2c_bfin_twi_device,
966 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
967 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
968 &bfin_sport0_uart_device,
970 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
971 &bfin_sport1_uart_device,
975 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
976 &bfin_device_gpiokeys,
979 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
984 static int __init cm_init(void)
986 printk(KERN_INFO "%s(): registering device resources\n", __func__);
987 i2c_register_board_info(0, bfin_i2c_board_info,
988 ARRAY_SIZE(bfin_i2c_board_info));
989 platform_add_devices(cmbf527_devices, ARRAY_SIZE(cmbf527_devices));
990 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
994 arch_initcall(cm_init);
996 static struct platform_device *cmbf527_early_devices[] __initdata = {
997 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
998 #ifdef CONFIG_SERIAL_BFIN_UART0
1001 #ifdef CONFIG_SERIAL_BFIN_UART1
1006 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1007 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1008 &bfin_sport0_uart_device,
1010 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1011 &bfin_sport1_uart_device,
1016 void __init native_machine_early_platform_add_devices(void)
1018 printk(KERN_INFO "register early platform devices\n");
1019 early_platform_add_devices(cmbf527_early_devices,
1020 ARRAY_SIZE(cmbf527_early_devices));
1023 void native_machine_restart(char *cmd)
1025 /* workaround reboot hang when booting from SPI */
1026 if ((bfin_read_SYSCR() & 0x7) == 0x3)
1027 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1030 void bfin_get_ether_addr(char *addr)
1032 random_ether_addr(addr);
1033 printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
1035 EXPORT_SYMBOL(bfin_get_ether_addr);