2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/platform_device.h>
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
13 #include <linux/mtd/physmap.h>
14 #include <linux/spi/spi.h>
15 #include <linux/spi/flash.h>
16 #include <linux/i2c.h>
17 #include <linux/irq.h>
18 #include <linux/interrupt.h>
19 #include <linux/usb/musb.h>
20 #include <linux/leds.h>
21 #include <linux/input.h>
23 #include <asm/bfin5xx_spi.h>
24 #include <asm/reboot.h>
26 #include <asm/portmux.h>
28 #include <linux/spi/ad7877.h>
29 #include <asm/bfin_sport.h>
32 * Name the Board for the /proc/cpuinfo
34 #ifdef CONFIG_BFIN527_EZKIT_V2
35 const char bfin_board_name[] = "ADI BF527-EZKIT V2";
37 const char bfin_board_name[] = "ADI BF527-EZKIT";
41 * Driver needs to know address, irq and flag pin.
44 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
45 #include <linux/usb/isp1760.h>
46 static struct resource bfin_isp1760_resources[] = {
49 .end = 0x203C0000 + 0x000fffff,
50 .flags = IORESOURCE_MEM,
55 .flags = IORESOURCE_IRQ,
59 static struct isp1760_platform_data isp1760_priv = {
64 .dack_polarity_high = 0,
65 .dreq_polarity_high = 0,
68 static struct platform_device bfin_isp1760_device = {
72 .platform_data = &isp1760_priv,
74 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
75 .resource = bfin_isp1760_resources,
79 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
80 static struct resource musb_resources[] = {
84 .flags = IORESOURCE_MEM,
86 [1] = { /* general IRQ */
87 .start = IRQ_USB_INT0,
89 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
95 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
100 static struct musb_hdrc_config musb_config = {
107 .gpio_vrsel = GPIO_PG13,
108 /* Some custom boards need to be active low, just set it to "0"
111 .gpio_vrsel_active = 1,
112 .clkin = 24, /* musb CLKIN in MHZ */
115 static struct musb_hdrc_platform_data musb_plat = {
116 #if defined(CONFIG_USB_MUSB_OTG)
118 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
120 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
121 .mode = MUSB_PERIPHERAL,
123 .config = &musb_config,
126 static u64 musb_dmamask = ~(u32)0;
128 static struct platform_device musb_device = {
129 .name = "musb-blackfin",
132 .dma_mask = &musb_dmamask,
133 .coherent_dma_mask = 0xffffffff,
134 .platform_data = &musb_plat,
136 .num_resources = ARRAY_SIZE(musb_resources),
137 .resource = musb_resources,
141 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
143 static struct resource bf52x_t350mcqb_resources[] = {
145 .start = IRQ_PPI_ERROR,
146 .end = IRQ_PPI_ERROR,
147 .flags = IORESOURCE_IRQ,
151 static struct platform_device bf52x_t350mcqb_device = {
152 .name = "bfin-t350mcqb",
154 .num_resources = ARRAY_SIZE(bf52x_t350mcqb_resources),
155 .resource = bf52x_t350mcqb_resources,
159 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
160 #include <asm/bfin-lq035q1.h>
162 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
163 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
164 .ppi_mode = USE_RGB565_8_BIT_PPI,
167 static struct resource bfin_lq035q1_resources[] = {
169 .start = IRQ_PPI_ERROR,
170 .end = IRQ_PPI_ERROR,
171 .flags = IORESOURCE_IRQ,
175 static struct platform_device bfin_lq035q1_device = {
176 .name = "bfin-lq035q1",
178 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
179 .resource = bfin_lq035q1_resources,
181 .platform_data = &bfin_lq035q1_data,
186 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
187 static struct mtd_partition ezkit_partitions[] = {
189 .name = "bootloader(nor)",
193 .name = "linux kernel(nor)",
195 .offset = MTDPART_OFS_APPEND,
197 .name = "file system(nor)",
198 .size = MTDPART_SIZ_FULL,
199 .offset = MTDPART_OFS_APPEND,
203 static struct physmap_flash_data ezkit_flash_data = {
205 .parts = ezkit_partitions,
206 .nr_parts = ARRAY_SIZE(ezkit_partitions),
209 static struct resource ezkit_flash_resource = {
212 .flags = IORESOURCE_MEM,
215 static struct platform_device ezkit_flash_device = {
216 .name = "physmap-flash",
219 .platform_data = &ezkit_flash_data,
222 .resource = &ezkit_flash_resource,
226 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
227 static struct mtd_partition partition_info[] = {
229 .name = "bootloader(nand)",
233 .name = "linux kernel(nand)",
234 .offset = MTDPART_OFS_APPEND,
235 .size = 4 * 1024 * 1024,
238 .name = "file system(nand)",
239 .offset = MTDPART_OFS_APPEND,
240 .size = MTDPART_SIZ_FULL,
244 static struct bf5xx_nand_platform bf5xx_nand_platform = {
245 .data_width = NFC_NWIDTH_8,
246 .partitions = partition_info,
247 .nr_partitions = ARRAY_SIZE(partition_info),
252 static struct resource bf5xx_nand_resources[] = {
255 .end = NFC_DATA_RD + 2,
256 .flags = IORESOURCE_MEM,
261 .flags = IORESOURCE_IRQ,
265 static struct platform_device bf5xx_nand_device = {
266 .name = "bf5xx-nand",
268 .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
269 .resource = bf5xx_nand_resources,
271 .platform_data = &bf5xx_nand_platform,
276 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
277 static struct resource bfin_pcmcia_cf_resources[] = {
279 .start = 0x20310000, /* IO PORT */
281 .flags = IORESOURCE_MEM,
283 .start = 0x20311000, /* Attribute Memory */
285 .flags = IORESOURCE_MEM,
289 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
291 .start = 6, /* Card Detect PF6 */
293 .flags = IORESOURCE_IRQ,
297 static struct platform_device bfin_pcmcia_cf_device = {
298 .name = "bfin_cf_pcmcia",
300 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
301 .resource = bfin_pcmcia_cf_resources,
305 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
306 static struct platform_device rtc_device = {
312 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
313 #include <linux/smc91x.h>
315 static struct smc91x_platdata smc91x_info = {
316 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
317 .leda = RPC_LED_100_10,
318 .ledb = RPC_LED_TX_RX,
321 static struct resource smc91x_resources[] = {
323 .name = "smc91x-regs",
325 .end = 0x20300300 + 16,
326 .flags = IORESOURCE_MEM,
331 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
334 static struct platform_device smc91x_device = {
337 .num_resources = ARRAY_SIZE(smc91x_resources),
338 .resource = smc91x_resources,
340 .platform_data = &smc91x_info,
345 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
346 static struct resource dm9000_resources[] = {
349 .end = 0x203FB800 + 1,
350 .flags = IORESOURCE_MEM,
353 .start = 0x203FB800 + 4,
354 .end = 0x203FB800 + 5,
355 .flags = IORESOURCE_MEM,
360 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
364 static struct platform_device dm9000_device = {
367 .num_resources = ARRAY_SIZE(dm9000_resources),
368 .resource = dm9000_resources,
372 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
373 #include <linux/bfin_mac.h>
374 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
376 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
379 .irq = IRQ_MAC_PHYINT,
383 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
385 .phydev_data = bfin_phydev_data,
386 .phy_mode = PHY_INTERFACE_MODE_RMII,
387 .mac_peripherals = bfin_mac_peripherals,
390 static struct platform_device bfin_mii_bus = {
391 .name = "bfin_mii_bus",
393 .platform_data = &bfin_mii_bus_data,
397 static struct platform_device bfin_mac_device = {
400 .platform_data = &bfin_mii_bus,
405 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
406 static struct resource net2272_bfin_resources[] = {
409 .end = 0x20300000 + 0x100,
410 .flags = IORESOURCE_MEM,
413 .flags = IORESOURCE_BUS,
417 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
421 static struct platform_device net2272_bfin_device = {
424 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
425 .resource = net2272_bfin_resources,
429 #if defined(CONFIG_MTD_M25P80) \
430 || defined(CONFIG_MTD_M25P80_MODULE)
431 static struct mtd_partition bfin_spi_flash_partitions[] = {
433 .name = "bootloader(spi)",
436 .mask_flags = MTD_CAP_ROM
438 .name = "linux kernel(spi)",
439 .size = MTDPART_SIZ_FULL,
440 .offset = MTDPART_OFS_APPEND,
444 static struct flash_platform_data bfin_spi_flash_data = {
446 .parts = bfin_spi_flash_partitions,
447 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
451 /* SPI flash chip (m25p64) */
452 static struct bfin5xx_spi_chip spi_flash_chip_info = {
453 .enable_dma = 0, /* use dma transfer with this chip*/
457 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
458 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
463 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
464 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
466 .vref_delay_usecs = 50, /* internal, no capacitor */
469 .pressure_max = 1000,
471 .stopacq_polarity = 1,
472 .first_conversion_delay = 3,
473 .acquisition_time = 1,
475 .pen_down_acc_interval = 1,
479 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
480 #include <linux/spi/ad7879.h>
481 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
482 .model = 7879, /* Model = AD7879 */
483 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
484 .pressure_max = 10000,
486 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
487 .acquisition_time = 1, /* 4us acquisition time per sample */
488 .median = 2, /* do 8 measurements */
489 .averaging = 1, /* take the average of 4 middle samples */
490 .pen_down_acc_interval = 255, /* 9.4 ms */
491 .gpio_export = 0, /* Export GPIO to gpiolib */
495 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
496 defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
498 static const u16 bfin_snd_pin[][7] = {
499 {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
500 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
501 {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
502 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
505 static struct bfin_snd_platform_data bfin_snd_data[] = {
507 .pin_req = &bfin_snd_pin[0][0],
510 .pin_req = &bfin_snd_pin[1][0],
514 #define BFIN_SND_RES(x) \
517 .start = SPORT##x##_TCR1, \
518 .end = SPORT##x##_TCR1, \
519 .flags = IORESOURCE_MEM \
522 .start = CH_SPORT##x##_RX, \
523 .end = CH_SPORT##x##_RX, \
524 .flags = IORESOURCE_DMA, \
527 .start = CH_SPORT##x##_TX, \
528 .end = CH_SPORT##x##_TX, \
529 .flags = IORESOURCE_DMA, \
532 .start = IRQ_SPORT##x##_ERROR, \
533 .end = IRQ_SPORT##x##_ERROR, \
534 .flags = IORESOURCE_IRQ, \
538 static struct resource bfin_snd_resources[][4] = {
543 static struct platform_device bfin_pcm = {
544 .name = "bfin-pcm-audio",
549 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
550 static struct platform_device bfin_i2s = {
552 .id = CONFIG_SND_BF5XX_SPORT_NUM,
553 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
554 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
556 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
561 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
562 static struct platform_device bfin_tdm = {
564 .id = CONFIG_SND_BF5XX_SPORT_NUM,
565 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
566 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
568 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
573 static struct spi_board_info bfin_spi_board_info[] __initdata = {
574 #if defined(CONFIG_MTD_M25P80) \
575 || defined(CONFIG_MTD_M25P80_MODULE)
577 /* the modalias must be the same as spi device driver name */
578 .modalias = "m25p80", /* Name of spi_driver for this device */
579 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
580 .bus_num = 0, /* Framework bus number */
581 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
582 .platform_data = &bfin_spi_flash_data,
583 .controller_data = &spi_flash_chip_info,
588 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
589 || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
591 .modalias = "ad183x",
592 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
595 .platform_data = "ad1836",
599 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
601 .modalias = "mmc_spi",
602 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
605 .controller_data = &mmc_spi_chip_info,
610 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
612 .modalias = "ad7877",
613 .platform_data = &bfin_ad7877_ts_info,
615 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
620 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
622 .modalias = "ad7879",
623 .platform_data = &bfin_ad7879_ts_info,
625 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
628 .mode = SPI_CPHA | SPI_CPOL,
631 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
633 .modalias = "spidev",
634 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
639 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
641 .modalias = "bfin-lq035q1-spi",
642 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
645 .mode = SPI_CPHA | SPI_CPOL,
650 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
651 /* SPI controller data */
652 static struct bfin5xx_spi_master bfin_spi0_info = {
654 .enable_dma = 1, /* master has the ability to do dma transfer */
655 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
659 static struct resource bfin_spi0_resource[] = {
661 .start = SPI0_REGBASE,
662 .end = SPI0_REGBASE + 0xFF,
663 .flags = IORESOURCE_MEM,
668 .flags = IORESOURCE_DMA,
673 .flags = IORESOURCE_IRQ,
677 static struct platform_device bfin_spi0_device = {
679 .id = 0, /* Bus number */
680 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
681 .resource = bfin_spi0_resource,
683 .platform_data = &bfin_spi0_info, /* Passed to driver */
686 #endif /* spi master and devices */
688 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
689 #ifdef CONFIG_SERIAL_BFIN_UART0
690 static struct resource bfin_uart0_resources[] = {
694 .flags = IORESOURCE_MEM,
697 .start = IRQ_UART0_RX,
698 .end = IRQ_UART0_RX+1,
699 .flags = IORESOURCE_IRQ,
702 .start = IRQ_UART0_ERROR,
703 .end = IRQ_UART0_ERROR,
704 .flags = IORESOURCE_IRQ,
707 .start = CH_UART0_TX,
709 .flags = IORESOURCE_DMA,
712 .start = CH_UART0_RX,
714 .flags = IORESOURCE_DMA,
718 static unsigned short bfin_uart0_peripherals[] = {
719 P_UART0_TX, P_UART0_RX, 0
722 static struct platform_device bfin_uart0_device = {
725 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
726 .resource = bfin_uart0_resources,
728 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
732 #ifdef CONFIG_SERIAL_BFIN_UART1
733 static struct resource bfin_uart1_resources[] = {
737 .flags = IORESOURCE_MEM,
740 .start = IRQ_UART1_RX,
741 .end = IRQ_UART1_RX+1,
742 .flags = IORESOURCE_IRQ,
745 .start = IRQ_UART1_ERROR,
746 .end = IRQ_UART1_ERROR,
747 .flags = IORESOURCE_IRQ,
750 .start = CH_UART1_TX,
752 .flags = IORESOURCE_DMA,
755 .start = CH_UART1_RX,
757 .flags = IORESOURCE_DMA,
759 #ifdef CONFIG_BFIN_UART1_CTSRTS
763 .flags = IORESOURCE_IO,
768 .flags = IORESOURCE_IO,
773 static unsigned short bfin_uart1_peripherals[] = {
774 P_UART1_TX, P_UART1_RX, 0
777 static struct platform_device bfin_uart1_device = {
780 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
781 .resource = bfin_uart1_resources,
783 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
789 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
790 #ifdef CONFIG_BFIN_SIR0
791 static struct resource bfin_sir0_resources[] = {
795 .flags = IORESOURCE_MEM,
798 .start = IRQ_UART0_RX,
799 .end = IRQ_UART0_RX+1,
800 .flags = IORESOURCE_IRQ,
803 .start = CH_UART0_RX,
804 .end = CH_UART0_RX+1,
805 .flags = IORESOURCE_DMA,
809 static struct platform_device bfin_sir0_device = {
812 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
813 .resource = bfin_sir0_resources,
816 #ifdef CONFIG_BFIN_SIR1
817 static struct resource bfin_sir1_resources[] = {
821 .flags = IORESOURCE_MEM,
824 .start = IRQ_UART1_RX,
825 .end = IRQ_UART1_RX+1,
826 .flags = IORESOURCE_IRQ,
829 .start = CH_UART1_RX,
830 .end = CH_UART1_RX+1,
831 .flags = IORESOURCE_DMA,
835 static struct platform_device bfin_sir1_device = {
838 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
839 .resource = bfin_sir1_resources,
844 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
845 static struct resource bfin_twi0_resource[] = {
847 .start = TWI0_REGBASE,
849 .flags = IORESOURCE_MEM,
854 .flags = IORESOURCE_IRQ,
858 static struct platform_device i2c_bfin_twi_device = {
859 .name = "i2c-bfin-twi",
861 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
862 .resource = bfin_twi0_resource,
866 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
867 #include <linux/mfd/adp5520.h>
870 * ADP5520/5501 LEDs Data
873 static struct led_info adp5520_leds[] = {
875 .name = "adp5520-led1",
876 .default_trigger = "none",
877 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
881 static struct adp5520_leds_platform_data adp5520_leds_data = {
882 .num_leds = ARRAY_SIZE(adp5520_leds),
883 .leds = adp5520_leds,
884 .fade_in = ADP5520_FADE_T_600ms,
885 .fade_out = ADP5520_FADE_T_600ms,
886 .led_on_time = ADP5520_LED_ONT_600ms,
890 * ADP5520 Keypad Data
893 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
894 [ADP5520_KEY(3, 3)] = KEY_1,
895 [ADP5520_KEY(2, 3)] = KEY_2,
896 [ADP5520_KEY(1, 3)] = KEY_3,
897 [ADP5520_KEY(0, 3)] = KEY_UP,
898 [ADP5520_KEY(3, 2)] = KEY_4,
899 [ADP5520_KEY(2, 2)] = KEY_5,
900 [ADP5520_KEY(1, 2)] = KEY_6,
901 [ADP5520_KEY(0, 2)] = KEY_DOWN,
902 [ADP5520_KEY(3, 1)] = KEY_7,
903 [ADP5520_KEY(2, 1)] = KEY_8,
904 [ADP5520_KEY(1, 1)] = KEY_9,
905 [ADP5520_KEY(0, 1)] = KEY_DOT,
906 [ADP5520_KEY(3, 0)] = KEY_BACKSPACE,
907 [ADP5520_KEY(2, 0)] = KEY_0,
908 [ADP5520_KEY(1, 0)] = KEY_HELP,
909 [ADP5520_KEY(0, 0)] = KEY_ENTER,
912 static struct adp5520_keys_platform_data adp5520_keys_data = {
913 .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
914 .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
915 .keymap = adp5520_keymap,
916 .keymapsize = ARRAY_SIZE(adp5520_keymap),
921 * ADP5520/5501 Multifunction Device Init Data
924 static struct adp5520_platform_data adp5520_pdev_data = {
925 .leds = &adp5520_leds_data,
926 .keys = &adp5520_keys_data,
931 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
932 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
934 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
937 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
939 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
943 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
945 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
948 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
950 I2C_BOARD_INFO("ad7879", 0x2C),
952 .platform_data = (void *)&bfin_ad7879_ts_info,
955 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
957 I2C_BOARD_INFO("pmic-adp5520", 0x32),
959 .platform_data = (void *)&adp5520_pdev_data,
962 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
964 I2C_BOARD_INFO("ssm2602", 0x1b),
967 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
969 I2C_BOARD_INFO("ad5252", 0x2f),
972 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
974 I2C_BOARD_INFO("adau1373", 0x1A),
979 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
980 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
981 static struct resource bfin_sport0_uart_resources[] = {
983 .start = SPORT0_TCR1,
984 .end = SPORT0_MRCS3+4,
985 .flags = IORESOURCE_MEM,
988 .start = IRQ_SPORT0_RX,
989 .end = IRQ_SPORT0_RX+1,
990 .flags = IORESOURCE_IRQ,
993 .start = IRQ_SPORT0_ERROR,
994 .end = IRQ_SPORT0_ERROR,
995 .flags = IORESOURCE_IRQ,
999 static unsigned short bfin_sport0_peripherals[] = {
1000 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1001 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
1004 static struct platform_device bfin_sport0_uart_device = {
1005 .name = "bfin-sport-uart",
1007 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1008 .resource = bfin_sport0_uart_resources,
1010 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
1014 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1015 static struct resource bfin_sport1_uart_resources[] = {
1017 .start = SPORT1_TCR1,
1018 .end = SPORT1_MRCS3+4,
1019 .flags = IORESOURCE_MEM,
1022 .start = IRQ_SPORT1_RX,
1023 .end = IRQ_SPORT1_RX+1,
1024 .flags = IORESOURCE_IRQ,
1027 .start = IRQ_SPORT1_ERROR,
1028 .end = IRQ_SPORT1_ERROR,
1029 .flags = IORESOURCE_IRQ,
1033 static unsigned short bfin_sport1_peripherals[] = {
1034 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
1035 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
1038 static struct platform_device bfin_sport1_uart_device = {
1039 .name = "bfin-sport-uart",
1041 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
1042 .resource = bfin_sport1_uart_resources,
1044 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
1050 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1051 #include <linux/gpio_keys.h>
1053 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1054 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
1055 {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
1058 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1059 .buttons = bfin_gpio_keys_table,
1060 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
1063 static struct platform_device bfin_device_gpiokeys = {
1064 .name = "gpio-keys",
1066 .platform_data = &bfin_gpio_keys_data,
1071 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1072 #include <asm/bfin_rotary.h>
1074 static struct bfin_rotary_platform_data bfin_rotary_data = {
1075 /*.rotary_up_key = KEY_UP,*/
1076 /*.rotary_down_key = KEY_DOWN,*/
1077 .rotary_rel_code = REL_WHEEL,
1078 .rotary_button_key = KEY_ENTER,
1079 .debounce = 10, /* 0..17 */
1080 .mode = ROT_QUAD_ENC | ROT_DEBE,
1083 static struct resource bfin_rotary_resources[] = {
1087 .flags = IORESOURCE_IRQ,
1091 static struct platform_device bfin_rotary_device = {
1092 .name = "bfin-rotary",
1094 .num_resources = ARRAY_SIZE(bfin_rotary_resources),
1095 .resource = bfin_rotary_resources,
1097 .platform_data = &bfin_rotary_data,
1102 static const unsigned int cclk_vlev_datasheet[] =
1104 VRPAIR(VLEV_100, 400000000),
1105 VRPAIR(VLEV_105, 426000000),
1106 VRPAIR(VLEV_110, 500000000),
1107 VRPAIR(VLEV_115, 533000000),
1108 VRPAIR(VLEV_120, 600000000),
1111 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1112 .tuple_tab = cclk_vlev_datasheet,
1113 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1114 .vr_settling_time = 25 /* us */,
1117 static struct platform_device bfin_dpmc = {
1118 .name = "bfin dpmc",
1120 .platform_data = &bfin_dmpc_vreg_data,
1124 static struct platform_device *stamp_devices[] __initdata = {
1128 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1132 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1133 &bfin_pcmcia_cf_device,
1136 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1140 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1141 &bfin_isp1760_device,
1144 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1148 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1152 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1156 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1161 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1162 &net2272_bfin_device,
1165 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1169 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
1170 &bf52x_t350mcqb_device,
1173 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1174 &bfin_lq035q1_device,
1177 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1178 #ifdef CONFIG_SERIAL_BFIN_UART0
1181 #ifdef CONFIG_SERIAL_BFIN_UART1
1186 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1187 #ifdef CONFIG_BFIN_SIR0
1190 #ifdef CONFIG_BFIN_SIR1
1195 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1196 &i2c_bfin_twi_device,
1199 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1200 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1201 &bfin_sport0_uart_device,
1203 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1204 &bfin_sport1_uart_device,
1208 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1209 &bfin_device_gpiokeys,
1212 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1213 &bfin_rotary_device,
1216 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1217 &ezkit_flash_device,
1220 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
1221 defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1225 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1229 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1234 static int __init ezkit_init(void)
1236 printk(KERN_INFO "%s(): registering device resources\n", __func__);
1237 i2c_register_board_info(0, bfin_i2c_board_info,
1238 ARRAY_SIZE(bfin_i2c_board_info));
1239 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1240 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1244 arch_initcall(ezkit_init);
1246 static struct platform_device *ezkit_early_devices[] __initdata = {
1247 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1248 #ifdef CONFIG_SERIAL_BFIN_UART0
1251 #ifdef CONFIG_SERIAL_BFIN_UART1
1256 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1257 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1258 &bfin_sport0_uart_device,
1260 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1261 &bfin_sport1_uart_device,
1266 void __init native_machine_early_platform_add_devices(void)
1268 printk(KERN_INFO "register early platform devices\n");
1269 early_platform_add_devices(ezkit_early_devices,
1270 ARRAY_SIZE(ezkit_early_devices));
1273 void native_machine_restart(char *cmd)
1275 /* workaround reboot hang when booting from SPI */
1276 if ((bfin_read_SYSCR() & 0x7) == 0x3)
1277 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1280 void bfin_get_ether_addr(char *addr)
1282 /* the MAC is stored in OTP memory page 0xDF */
1285 u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
1287 ret = otp_read(0xDF, 0x00, &otp_mac);
1289 char *otp_mac_p = (char *)&otp_mac;
1290 for (ret = 0; ret < 6; ++ret)
1291 addr[ret] = otp_mac_p[5 - ret];
1294 EXPORT_SYMBOL(bfin_get_ether_addr);