arch/blackfin/mach-bf537/boards/stamp.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/export.h>
  11 #include <linux/kernel.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/io.h>
  14 #include <linux/mtd/mtd.h>
  15 #include <linux/mtd/nand.h>
  16 #include <linux/mtd/partitions.h>
  17 #include <linux/mtd/plat-ram.h>
  18 #include <linux/mtd/physmap.h>
  19 #include <linux/spi/spi.h>
  20 #include <linux/spi/flash.h>
  21 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  22 #include <linux/usb/isp1362.h>
  23 #endif
  24 #include <linux/i2c.h>
  25 #include <linux/i2c/adp5588.h>
  26 #include <linux/etherdevice.h>
  27 #include <linux/ata_platform.h>
  28 #include <linux/irq.h>
  29 #include <linux/interrupt.h>
  30 #include <linux/usb/sl811.h>
  31 #include <linux/spi/mmc_spi.h>
  32 #include <linux/leds.h>
  33 #include <linux/input.h>
  34 #include <asm/dma.h>
  35 #include <asm/bfin5xx_spi.h>
  36 #include <asm/reboot.h>
  37 #include <asm/portmux.h>
  38 #include <asm/dpmc.h>
  39 #include <asm/bfin_sport.h>
  40 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
  41 #include <linux/regulator/fixed.h>
  42 #endif
  43 #include <linux/regulator/machine.h>
  44 #include <linux/regulator/consumer.h>
  45 #include <linux/regulator/userspace-consumer.h>
  46
  47 /*
  48  * Name the Board for the /proc/cpuinfo
  49  */
  50 const char bfin_board_name[] = "ADI BF537-STAMP";
  51
  52 /*
  53  *  Driver needs to know address, irq and flag pin.
  54  */
  55
  56 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  57 #include <linux/usb/isp1760.h>
  58 static struct resource bfin_isp1760_resources[] = {
  59         [0] = {
  60                 .start  = 0x203C0000,
  61                 .end    = 0x203C0000 + 0x000fffff,
  62                 .flags  = IORESOURCE_MEM,
  63         },
  64         [1] = {
  65                 .start  = IRQ_PF7,
  66                 .end    = IRQ_PF7,
  67                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  68         },
  69 };
  70
  71 static struct isp1760_platform_data isp1760_priv = {
  72         .is_isp1761 = 0,
  73         .bus_width_16 = 1,
  74         .port1_otg = 0,
  75         .analog_oc = 0,
  76         .dack_polarity_high = 0,
  77         .dreq_polarity_high = 0,
  78 };
  79
  80 static struct platform_device bfin_isp1760_device = {
  81         .name           = "isp1760",
  82         .id             = 0,
  83         .dev = {
  84                 .platform_data = &isp1760_priv,
  85         },
  86         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  87         .resource       = bfin_isp1760_resources,
  88 };
  89 #endif
  90
  91 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
  92 #include <linux/gpio_keys.h>
  93
  94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
  95         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
  96         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
  97         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
  98         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
  99 };
 100
 101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 102         .buttons        = bfin_gpio_keys_table,
 103         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 104 };
 105
 106 static struct platform_device bfin_device_gpiokeys = {
 107         .name      = "gpio-keys",
 108         .dev = {
 109                 .platform_data = &bfin_gpio_keys_data,
 110         },
 111 };
 112 #endif
 113
 114 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 115 static struct resource bfin_pcmcia_cf_resources[] = {
 116         {
 117                 .start = 0x20310000, /* IO PORT */
 118                 .end = 0x20312000,
 119                 .flags = IORESOURCE_MEM,
 120         }, {
 121                 .start = 0x20311000, /* Attribute Memory */
 122                 .end = 0x20311FFF,
 123                 .flags = IORESOURCE_MEM,
 124         }, {
 125                 .start = IRQ_PF4,
 126                 .end = IRQ_PF4,
 127                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 128         }, {
 129                 .start = 6, /* Card Detect PF6 */
 130                 .end = 6,
 131                 .flags = IORESOURCE_IRQ,
 132         },
 133 };
 134
 135 static struct platform_device bfin_pcmcia_cf_device = {
 136         .name = "bfin_cf_pcmcia",
 137         .id = -1,
 138         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 139         .resource = bfin_pcmcia_cf_resources,
 140 };
 141 #endif
 142
 143 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 144 static struct platform_device rtc_device = {
 145         .name = "rtc-bfin",
 146         .id   = -1,
 147 };
 148 #endif
 149
 150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 151 #include <linux/smc91x.h>
 152
 153 static struct smc91x_platdata smc91x_info = {
 154         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 155         .leda = RPC_LED_100_10,
 156         .ledb = RPC_LED_TX_RX,
 157 };
 158
 159 static struct resource smc91x_resources[] = {
 160         {
 161                 .name = "smc91x-regs",
 162                 .start = 0x20300300,
 163                 .end = 0x20300300 + 16,
 164                 .flags = IORESOURCE_MEM,
 165         }, {
 166
 167                 .start = IRQ_PF7,
 168                 .end = IRQ_PF7,
 169                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 170         },
 171 };
 172 static struct platform_device smc91x_device = {
 173         .name = "smc91x",
 174         .id = 0,
 175         .num_resources = ARRAY_SIZE(smc91x_resources),
 176         .resource = smc91x_resources,
 177         .dev    = {
 178                 .platform_data  = &smc91x_info,
 179         },
 180 };
 181 #endif
 182
 183 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 184 static struct resource dm9000_resources[] = {
 185         [0] = {
 186                 .start  = 0x203FB800,
 187                 .end    = 0x203FB800 + 1,
 188                 .flags  = IORESOURCE_MEM,
 189         },
 190         [1] = {
 191                 .start  = 0x203FB804,
 192                 .end    = 0x203FB804 + 1,
 193                 .flags  = IORESOURCE_MEM,
 194         },
 195         [2] = {
 196                 .start  = IRQ_PF9,
 197                 .end    = IRQ_PF9,
 198                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 199         },
 200 };
 201
 202 static struct platform_device dm9000_device = {
 203         .name           = "dm9000",
 204         .id             = -1,
 205         .num_resources  = ARRAY_SIZE(dm9000_resources),
 206         .resource       = dm9000_resources,
 207 };
 208 #endif
 209
 210 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 211 static struct resource sl811_hcd_resources[] = {
 212         {
 213                 .start = 0x20340000,
 214                 .end = 0x20340000,
 215                 .flags = IORESOURCE_MEM,
 216         }, {
 217                 .start = 0x20340004,
 218                 .end = 0x20340004,
 219                 .flags = IORESOURCE_MEM,
 220         }, {
 221                 .start = IRQ_PF4,
 222                 .end = IRQ_PF4,
 223                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 224         },
 225 };
 226
 227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 228 void sl811_port_power(struct device *dev, int is_on)
 229 {
 230         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
 231         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 232 }
 233 #endif
 234
 235 static struct sl811_platform_data sl811_priv = {
 236         .potpg = 10,
 237         .power = 250,       /* == 500mA */
 238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 239         .port_power = &sl811_port_power,
 240 #endif
 241 };
 242
 243 static struct platform_device sl811_hcd_device = {
 244         .name = "sl811-hcd",
 245         .id = 0,
 246         .dev = {
 247                 .platform_data = &sl811_priv,
 248         },
 249         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
 250         .resource = sl811_hcd_resources,
 251 };
 252 #endif
 253
 254 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 255 static struct resource isp1362_hcd_resources[] = {
 256         {
 257                 .start = 0x20360000,
 258                 .end = 0x20360000,
 259                 .flags = IORESOURCE_MEM,
 260         }, {
 261                 .start = 0x20360004,
 262                 .end = 0x20360004,
 263                 .flags = IORESOURCE_MEM,
 264         }, {
 265                 .start = IRQ_PF3,
 266                 .end = IRQ_PF3,
 267                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 268         },
 269 };
 270
 271 static struct isp1362_platform_data isp1362_priv = {
 272         .sel15Kres = 1,
 273         .clknotstop = 0,
 274         .oc_enable = 0,
 275         .int_act_high = 0,
 276         .int_edge_triggered = 0,
 277         .remote_wakeup_connected = 0,
 278         .no_power_switching = 1,
 279         .power_switching_mode = 0,
 280 };
 281
 282 static struct platform_device isp1362_hcd_device = {
 283         .name = "isp1362-hcd",
 284         .id = 0,
 285         .dev = {
 286                 .platform_data = &isp1362_priv,
 287         },
 288         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 289         .resource = isp1362_hcd_resources,
 290 };
 291 #endif
 292
 293 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 294 static unsigned short bfin_can_peripherals[] = {
 295         P_CAN0_RX, P_CAN0_TX, 0
 296 };
 297
 298 static struct resource bfin_can_resources[] = {
 299         {
 300                 .start = 0xFFC02A00,
 301                 .end = 0xFFC02FFF,
 302                 .flags = IORESOURCE_MEM,
 303         },
 304         {
 305                 .start = IRQ_CAN_RX,
 306                 .end = IRQ_CAN_RX,
 307                 .flags = IORESOURCE_IRQ,
 308         },
 309         {
 310                 .start = IRQ_CAN_TX,
 311                 .end = IRQ_CAN_TX,
 312                 .flags = IORESOURCE_IRQ,
 313         },
 314         {
 315                 .start = IRQ_CAN_ERROR,
 316                 .end = IRQ_CAN_ERROR,
 317                 .flags = IORESOURCE_IRQ,
 318         },
 319 };
 320
 321 static struct platform_device bfin_can_device = {
 322         .name = "bfin_can",
 323         .num_resources = ARRAY_SIZE(bfin_can_resources),
 324         .resource = bfin_can_resources,
 325         .dev = {
 326                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 327         },
 328 };
 329 #endif
 330
 331 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 332 #include <linux/bfin_mac.h>
 333 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 334
 335 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 336         {
 337                 .addr = 1,
 338                 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
 339         },
 340 };
 341
 342 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 343         .phydev_number = 1,
 344         .phydev_data = bfin_phydev_data,
 345         .phy_mode = PHY_INTERFACE_MODE_MII,
 346         .mac_peripherals = bfin_mac_peripherals,
 347 };
 348
 349 static struct platform_device bfin_mii_bus = {
 350         .name = "bfin_mii_bus",
 351         .dev = {
 352                 .platform_data = &bfin_mii_bus_data,
 353         }
 354 };
 355
 356 static struct platform_device bfin_mac_device = {
 357         .name = "bfin_mac",
 358         .dev = {
 359                 .platform_data = &bfin_mii_bus,
 360         }
 361 };
 362 #endif
 363
 364 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 365 static struct resource net2272_bfin_resources[] = {
 366         {
 367                 .start = 0x20300000,
 368                 .end = 0x20300000 + 0x100,
 369                 .flags = IORESOURCE_MEM,
 370         }, {
 371                 .start = 1,
 372                 .flags = IORESOURCE_BUS,
 373         }, {
 374                 .start = IRQ_PF7,
 375                 .end = IRQ_PF7,
 376                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 377         },
 378 };
 379
 380 static struct platform_device net2272_bfin_device = {
 381         .name = "net2272",
 382         .id = -1,
 383         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 384         .resource = net2272_bfin_resources,
 385 };
 386 #endif
 387
 388 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 389 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 390
 391 static struct mtd_partition bfin_plat_nand_partitions[] = {
 392         {
 393                 .name   = "linux kernel(nand)",
 394                 .size   = 0x400000,
 395                 .offset = 0,
 396         }, {
 397                 .name   = "file system(nand)",
 398                 .size   = MTDPART_SIZ_FULL,
 399                 .offset = MTDPART_OFS_APPEND,
 400         },
 401 };
 402
 403 #define BFIN_NAND_PLAT_CLE 2
 404 #define BFIN_NAND_PLAT_ALE 1
 405 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 406 {
 407         struct nand_chip *this = mtd->priv;
 408
 409         if (cmd == NAND_CMD_NONE)
 410                 return;
 411
 412         if (ctrl & NAND_CLE)
 413                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 414         else
 415                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 416 }
 417
 418 #define BFIN_NAND_PLAT_READY GPIO_PF3
 419 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 420 {
 421         return gpio_get_value(BFIN_NAND_PLAT_READY);
 422 }
 423
 424 static struct platform_nand_data bfin_plat_nand_data = {
 425         .chip = {
 426                 .nr_chips = 1,
 427                 .chip_delay = 30,
 428                 .part_probe_types = part_probes,
 429                 .partitions = bfin_plat_nand_partitions,
 430                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 431         },
 432         .ctrl = {
 433                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
 434                 .dev_ready = bfin_plat_nand_dev_ready,
 435         },
 436 };
 437
 438 #define MAX(x, y) (x > y ? x : y)
 439 static struct resource bfin_plat_nand_resources = {
 440         .start = 0x20212000,
 441         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 442         .flags = IORESOURCE_MEM,
 443 };
 444
 445 static struct platform_device bfin_async_nand_device = {
 446         .name = "gen_nand",
 447         .id = -1,
 448         .num_resources = 1,
 449         .resource = &bfin_plat_nand_resources,
 450         .dev = {
 451                 .platform_data = &bfin_plat_nand_data,
 452         },
 453 };
 454
 455 static void bfin_plat_nand_init(void)
 456 {
 457         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 458 }
 459 #else
 460 static void bfin_plat_nand_init(void) {}
 461 #endif
 462
 463 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 464 static struct mtd_partition stamp_partitions[] = {
 465         {
 466                 .name       = "bootloader(nor)",
 467                 .size       = 0x40000,
 468                 .offset     = 0,
 469         }, {
 470                 .name       = "linux kernel(nor)",
 471                 .size       = 0x180000,
 472                 .offset     = MTDPART_OFS_APPEND,
 473         }, {
 474                 .name       = "file system(nor)",
 475                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 476                 .offset     = MTDPART_OFS_APPEND,
 477         }, {
 478                 .name       = "MAC Address(nor)",
 479                 .size       = MTDPART_SIZ_FULL,
 480                 .offset     = 0x3F0000,
 481                 .mask_flags = MTD_WRITEABLE,
 482         }
 483 };
 484
 485 static struct physmap_flash_data stamp_flash_data = {
 486         .width      = 2,
 487         .parts      = stamp_partitions,
 488         .nr_parts   = ARRAY_SIZE(stamp_partitions),
 489 #ifdef CONFIG_ROMKERNEL
 490         .probe_type = "map_rom",
 491 #endif
 492 };
 493
 494 static struct resource stamp_flash_resource = {
 495         .start = 0x20000000,
 496         .end   = 0x203fffff,
 497         .flags = IORESOURCE_MEM,
 498 };
 499
 500 static struct platform_device stamp_flash_device = {
 501         .name          = "physmap-flash",
 502         .id            = 0,
 503         .dev = {
 504                 .platform_data = &stamp_flash_data,
 505         },
 506         .num_resources = 1,
 507         .resource      = &stamp_flash_resource,
 508 };
 509 #endif
 510
 511 #if defined(CONFIG_MTD_M25P80) \
 512         || defined(CONFIG_MTD_M25P80_MODULE)
 513 static struct mtd_partition bfin_spi_flash_partitions[] = {
 514         {
 515                 .name = "bootloader(spi)",
 516                 .size = 0x00040000,
 517                 .offset = 0,
 518                 .mask_flags = MTD_CAP_ROM
 519         }, {
 520                 .name = "linux kernel(spi)",
 521                 .size = 0x180000,
 522                 .offset = MTDPART_OFS_APPEND,
 523         }, {
 524                 .name = "file system(spi)",
 525                 .size = MTDPART_SIZ_FULL,
 526                 .offset = MTDPART_OFS_APPEND,
 527         }
 528 };
 529
 530 static struct flash_platform_data bfin_spi_flash_data = {
 531         .name = "m25p80",
 532         .parts = bfin_spi_flash_partitions,
 533         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 534         /* .type = "m25p64", */
 535 };
 536
 537 /* SPI flash chip (m25p64) */
 538 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 539         .enable_dma = 0,         /* use dma transfer with this chip*/
 540 };
 541 #endif
 542
 543 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 544 #include <linux/input/ad714x.h>
 545
 546 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
 547         {
 548                 .start_stage = 0,
 549                 .end_stage = 7,
 550                 .max_coord = 128,
 551         },
 552 };
 553
 554 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
 555         {
 556                 .keycode = BTN_FORWARD,
 557                 .l_mask = 0,
 558                 .h_mask = 0x600,
 559         },
 560         {
 561                 .keycode = BTN_LEFT,
 562                 .l_mask = 0,
 563                 .h_mask = 0x500,
 564         },
 565         {
 566                 .keycode = BTN_MIDDLE,
 567                 .l_mask = 0,
 568                 .h_mask = 0x800,
 569         },
 570         {
 571                 .keycode = BTN_RIGHT,
 572                 .l_mask = 0x100,
 573                 .h_mask = 0x400,
 574         },
 575         {
 576                 .keycode = BTN_BACK,
 577                 .l_mask = 0x200,
 578                 .h_mask = 0x400,
 579         },
 580 };
 581 static struct ad714x_platform_data ad7147_spi_platform_data = {
 582         .slider_num = 1,
 583         .button_num = 5,
 584         .slider = ad7147_spi_slider_plat,
 585         .button = ad7147_spi_button_plat,
 586         .stage_cfg_reg =  {
 587                 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 588                 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 589                 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
 590                 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
 591                 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
 592                 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
 593                 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 594                 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 595                 {0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
 596                 {0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
 597                 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
 598                 {0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
 599         },
 600         .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
 601 };
 602 #endif
 603
 604 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 605 #include <linux/input/ad714x.h>
 606 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
 607         {
 608                 .keycode = BTN_1,
 609                 .l_mask = 0,
 610                 .h_mask = 0x1,
 611         },
 612         {
 613                 .keycode = BTN_2,
 614                 .l_mask = 0,
 615                 .h_mask = 0x2,
 616         },
 617         {
 618                 .keycode = BTN_3,
 619                 .l_mask = 0,
 620                 .h_mask = 0x4,
 621         },
 622         {
 623                 .keycode = BTN_4,
 624                 .l_mask = 0x0,
 625                 .h_mask = 0x8,
 626         },
 627 };
 628 static struct ad714x_platform_data ad7142_i2c_platform_data = {
 629         .button_num = 4,
 630         .button = ad7142_i2c_button_plat,
 631         .stage_cfg_reg =  {
 632                 /* fixme: figure out right setting for all comoponent according
 633                  * to hardware feature of EVAL-AD7142EB board */
 634                 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 635                 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 636                 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 637                 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 638                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 639                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 640                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 641                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 642                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 643                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 644                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 645                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 646         },
 647         .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
 648 };
 649 #endif
 650
 651 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
 652 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
 653         .enable_dma = 0,
 654 };
 655 #endif
 656
 657 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
 658 static unsigned short ad2s120x_platform_data[] = {
 659         /* used as SAMPLE and RDVEL */
 660         GPIO_PF5, GPIO_PF6, 0
 661 };
 662
 663 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
 664         .enable_dma = 0,
 665 };
 666 #endif
 667
 668 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
 669 static unsigned short ad2s1210_platform_data[] = {
 670         /* use as SAMPLE, A0, A1 */
 671         GPIO_PF7, GPIO_PF8, GPIO_PF9,
 672 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
 673         /* the RES0 and RES1 pins */
 674         GPIO_PF4, GPIO_PF5,
 675 # endif
 676         0,
 677 };
 678
 679 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
 680         .enable_dma = 0,
 681 };
 682 #endif
 683
 684 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
 685 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
 686         .enable_dma = 0,
 687 };
 688 #endif
 689
 690 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
 691 static unsigned short ad7816_platform_data[] = {
 692         GPIO_PF4, /* rdwr_pin */
 693         GPIO_PF5, /* convert_pin */
 694         GPIO_PF7, /* busy_pin */
 695         0,
 696 };
 697
 698 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
 699         .enable_dma = 0,
 700 };
 701 #endif
 702
 703 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
 704 static unsigned long adt7310_platform_data[3] = {
 705 /* INT bound temperature alarm event. line 1 */
 706         IRQ_PG4, IRQF_TRIGGER_LOW,
 707 /* CT bound temperature alarm event irq_flags. line 0 */
 708         IRQF_TRIGGER_LOW,
 709 };
 710
 711 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
 712         .enable_dma = 0,
 713 };
 714 #endif
 715
 716 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
 717 static unsigned short ad7298_platform_data[] = {
 718         GPIO_PF7, /* busy_pin */
 719         0,
 720 };
 721 #endif
 722
 723 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
 724 static unsigned long adt7316_spi_data[2] = {
 725         IRQF_TRIGGER_LOW, /* interrupt flags */
 726         GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
 727 };
 728
 729 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
 730         .enable_dma = 0,
 731 };
 732 #endif
 733
 734 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 735 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 736
 737 static int bfin_mmc_spi_init(struct device *dev,
 738         irqreturn_t (*detect_int)(int, void *), void *data)
 739 {
 740         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
 741                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
 742 }
 743
 744 static void bfin_mmc_spi_exit(struct device *dev, void *data)
 745 {
 746         free_irq(MMC_SPI_CARD_DETECT_INT, data);
 747 }
 748
 749 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 750         .init = bfin_mmc_spi_init,
 751         .exit = bfin_mmc_spi_exit,
 752         .detect_delay = 100, /* msecs */
 753 };
 754
 755 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 756         .enable_dma = 0,
 757         .pio_interrupt = 0,
 758 };
 759 #endif
 760
 761 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 762 #include <linux/spi/ad7877.h>
 763 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 764         .model                  = 7877,
 765         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 766         .x_plate_ohms           = 419,
 767         .y_plate_ohms           = 486,
 768         .pressure_max           = 1000,
 769         .pressure_min           = 0,
 770         .stopacq_polarity       = 1,
 771         .first_conversion_delay = 3,
 772         .acquisition_time       = 1,
 773         .averaging              = 1,
 774         .pen_down_acc_interval  = 1,
 775 };
 776 #endif
 777
 778 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 779 #include <linux/spi/ad7879.h>
 780 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 781         .model                  = 7879, /* Model = AD7879 */
 782         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 783         .pressure_max           = 10000,
 784         .pressure_min           = 0,
 785         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 786         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 787         .median                 = 2,    /* do 8 measurements */
 788         .averaging              = 1,    /* take the average of 4 middle samples */
 789         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 790         .gpio_export            = 1,    /* Export GPIO to gpiolib */
 791         .gpio_base              = -1,   /* Dynamic allocation */
 792 };
 793 #endif
 794
 795 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 796 #include <linux/input/adxl34x.h>
 797 static const struct adxl34x_platform_data adxl34x_info = {
 798         .x_axis_offset = 0,
 799         .y_axis_offset = 0,
 800         .z_axis_offset = 0,
 801         .tap_threshold = 0x31,
 802         .tap_duration = 0x10,
 803         .tap_latency = 0x60,
 804         .tap_window = 0xF0,
 805         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 806         .act_axis_control = 0xFF,
 807         .activity_threshold = 5,
 808         .inactivity_threshold = 3,
 809         .inactivity_time = 4,
 810         .free_fall_threshold = 0x7,
 811         .free_fall_time = 0x20,
 812         .data_rate = 0x8,
 813         .data_range = ADXL_FULL_RES,
 814
 815         .ev_type = EV_ABS,
 816         .ev_code_x = ABS_X,             /* EV_REL */
 817         .ev_code_y = ABS_Y,             /* EV_REL */
 818         .ev_code_z = ABS_Z,             /* EV_REL */
 819
 820         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 821
 822 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 823 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 824         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 825         .fifo_mode = ADXL_FIFO_STREAM,
 826         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 827         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 828         .divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
 829         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 830         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 831 };
 832 #endif
 833
 834 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 835 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 836         .enable_dma     = 1,
 837 };
 838 #endif
 839
 840 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
 841 #include <linux/spi/adf702x.h>
 842 #define TXREG 0x0160A470
 843 static const u32 adf7021_regs[] = {
 844         0x09608FA0,
 845         0x00575011,
 846         0x00A7F092,
 847         0x2B141563,
 848         0x81F29E94,
 849         0x00003155,
 850         0x050A4F66,
 851         0x00000007,
 852         0x00000008,
 853         0x000231E9,
 854         0x3296354A,
 855         0x891A2B3B,
 856         0x00000D9C,
 857         0x0000000D,
 858         0x0000000E,
 859         0x0000000F,
 860 };
 861
 862 static struct adf702x_platform_data adf7021_platform_data = {
 863         .regs_base = (void *)SPORT1_TCR1,
 864         .dma_ch_rx = CH_SPORT1_RX,
 865         .dma_ch_tx = CH_SPORT1_TX,
 866         .irq_sport_err = IRQ_SPORT1_ERROR,
 867         .gpio_int_rfs = GPIO_PF8,
 868         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
 869                         P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
 870         .adf702x_model = MODEL_ADF7021,
 871         .adf702x_regs = adf7021_regs,
 872         .tx_reg = TXREG,
 873 };
 874 static inline void adf702x_mac_init(void)
 875 {
 876         random_ether_addr(adf7021_platform_data.mac_addr);
 877 }
 878 #else
 879 static inline void adf702x_mac_init(void) {}
 880 #endif
 881
 882 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 883 #include <linux/spi/ads7846.h>
 884 static int ads7873_get_pendown_state(void)
 885 {
 886         return gpio_get_value(GPIO_PF6);
 887 }
 888
 889 static struct ads7846_platform_data __initdata ad7873_pdata = {
 890         .model          = 7873,         /* AD7873 */
 891         .x_max          = 0xfff,
 892         .y_max          = 0xfff,
 893         .x_plate_ohms   = 620,
 894         .debounce_max   = 1,
 895         .debounce_rep   = 0,
 896         .debounce_tol   = (~0),
 897         .get_pendown_state = ads7873_get_pendown_state,
 898 };
 899 #endif
 900
 901 #if defined(CONFIG_MTD_DATAFLASH) \
 902         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 903
 904 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 905         {
 906                 .name = "bootloader(spi)",
 907                 .size = 0x00040000,
 908                 .offset = 0,
 909                 .mask_flags = MTD_CAP_ROM
 910         }, {
 911                 .name = "linux kernel(spi)",
 912                 .size = 0x180000,
 913                 .offset = MTDPART_OFS_APPEND,
 914         }, {
 915                 .name = "file system(spi)",
 916                 .size = MTDPART_SIZ_FULL,
 917                 .offset = MTDPART_OFS_APPEND,
 918         }
 919 };
 920
 921 static struct flash_platform_data bfin_spi_dataflash_data = {
 922         .name = "SPI Dataflash",
 923         .parts = bfin_spi_dataflash_partitions,
 924         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 925 };
 926
 927 /* DataFlash chip */
 928 static struct bfin5xx_spi_chip data_flash_chip_info = {
 929         .enable_dma = 0,         /* use dma transfer with this chip*/
 930 };
 931 #endif
 932
 933 #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
 934 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
 935         .enable_dma = 0,         /* use dma transfer with this chip*/
 936 };
 937 #endif
 938
 939 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 940 #if defined(CONFIG_MTD_M25P80) \
 941         || defined(CONFIG_MTD_M25P80_MODULE)
 942         {
 943                 /* the modalias must be the same as spi device driver name */
 944                 .modalias = "m25p80", /* Name of spi_driver for this device */
 945                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 946                 .bus_num = 0, /* Framework bus number */
 947                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 948                 .platform_data = &bfin_spi_flash_data,
 949                 .controller_data = &spi_flash_chip_info,
 950                 .mode = SPI_MODE_3,
 951         },
 952 #endif
 953 #if defined(CONFIG_MTD_DATAFLASH) \
 954         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 955         {       /* DataFlash chip */
 956                 .modalias = "mtd_dataflash",
 957                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 958                 .bus_num = 0, /* Framework bus number */
 959                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 960                 .platform_data = &bfin_spi_dataflash_data,
 961                 .controller_data = &data_flash_chip_info,
 962                 .mode = SPI_MODE_3,
 963         },
 964 #endif
 965
 966 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
 967         || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 968         {
 969                 .modalias = "ad1836",
 970                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 971                 .bus_num = 0,
 972                 .chip_select = 4,
 973                 .platform_data = "ad1836", /* only includes chip name for the moment */
 974                 .mode = SPI_MODE_3,
 975         },
 976 #endif
 977
 978 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 979         {
 980                 .modalias = "ad193x",
 981                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 982                 .bus_num = 0,
 983                 .chip_select = 5,
 984                 .mode = SPI_MODE_3,
 985         },
 986 #endif
 987
 988 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
 989         {
 990                 .modalias = "adav801",
 991                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 992                 .bus_num = 0,
 993                 .chip_select = 1,
 994                 .mode = SPI_MODE_3,
 995         },
 996 #endif
 997
 998 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 999         {
1000                 .modalias = "ad714x_captouch",
1001                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1002                 .irq = IRQ_PF4,
1003                 .bus_num = 0,
1004                 .chip_select = 5,
1005                 .mode = SPI_MODE_3,
1006                 .platform_data = &ad7147_spi_platform_data,
1007         },
1008 #endif
1009
1010 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1011         {
1012                 .modalias = "ad2s90",
1013                 .bus_num = 0,
1014                 .chip_select = 3,            /* change it for your board */
1015                 .mode = SPI_MODE_3,
1016                 .platform_data = NULL,
1017                 .controller_data = &ad2s90_spi_chip_info,
1018         },
1019 #endif
1020
1021 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1022         {
1023                 .modalias = "ad2s120x",
1024                 .bus_num = 0,
1025                 .chip_select = 4,            /* CS, change it for your board */
1026                 .platform_data = ad2s120x_platform_data,
1027                 .controller_data = &ad2s120x_spi_chip_info,
1028         },
1029 #endif
1030
1031 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1032         {
1033                 .modalias = "ad2s1210",
1034                 .max_speed_hz = 8192000,
1035                 .bus_num = 0,
1036                 .chip_select = 4,            /* CS, change it for your board */
1037                 .platform_data = ad2s1210_platform_data,
1038                 .controller_data = &ad2s1210_spi_chip_info,
1039         },
1040 #endif
1041
1042 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
1043         {
1044                 .modalias = "ad7314",
1045                 .max_speed_hz = 1000000,
1046                 .bus_num = 0,
1047                 .chip_select = 4,            /* CS, change it for your board */
1048                 .controller_data = &ad7314_spi_chip_info,
1049                 .mode = SPI_MODE_1,
1050         },
1051 #endif
1052
1053 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
1054         {
1055                 .modalias = "ad7818",
1056                 .max_speed_hz = 1000000,
1057                 .bus_num = 0,
1058                 .chip_select = 4,            /* CS, change it for your board */
1059                 .platform_data = ad7816_platform_data,
1060                 .controller_data = &ad7816_spi_chip_info,
1061                 .mode = SPI_MODE_3,
1062         },
1063 #endif
1064
1065 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
1066         {
1067                 .modalias = "adt7310",
1068                 .max_speed_hz = 1000000,
1069                 .irq = IRQ_PG5,         /* CT alarm event. Line 0 */
1070                 .bus_num = 0,
1071                 .chip_select = 4,       /* CS, change it for your board */
1072                 .platform_data = adt7310_platform_data,
1073                 .controller_data = &adt7310_spi_chip_info,
1074                 .mode = SPI_MODE_3,
1075         },
1076 #endif
1077
1078 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
1079         {
1080                 .modalias = "ad7298",
1081                 .max_speed_hz = 1000000,
1082                 .bus_num = 0,
1083                 .chip_select = 4,            /* CS, change it for your board */
1084                 .platform_data = ad7298_platform_data,
1085                 .mode = SPI_MODE_3,
1086         },
1087 #endif
1088
1089 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
1090         {
1091                 .modalias = "adt7316",
1092                 .max_speed_hz = 1000000,
1093                 .irq = IRQ_PG5,         /* interrupt line */
1094                 .bus_num = 0,
1095                 .chip_select = 4,       /* CS, change it for your board */
1096                 .platform_data = adt7316_spi_data,
1097                 .controller_data = &adt7316_spi_chip_info,
1098                 .mode = SPI_MODE_3,
1099         },
1100 #endif
1101
1102 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1103         {
1104                 .modalias = "mmc_spi",
1105                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1106                 .bus_num = 0,
1107                 .chip_select = 4,
1108                 .platform_data = &bfin_mmc_spi_pdata,
1109                 .controller_data = &mmc_spi_chip_info,
1110                 .mode = SPI_MODE_3,
1111         },
1112 #endif
1113 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1114         {
1115                 .modalias               = "ad7877",
1116                 .platform_data          = &bfin_ad7877_ts_info,
1117                 .irq                    = IRQ_PF6,
1118                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
1119                 .bus_num        = 0,
1120                 .chip_select  = 1,
1121         },
1122 #endif
1123 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1124         {
1125                 .modalias = "ad7879",
1126                 .platform_data = &bfin_ad7879_ts_info,
1127                 .irq = IRQ_PF7,
1128                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
1129                 .bus_num = 0,
1130                 .chip_select = 1,
1131                 .mode = SPI_CPHA | SPI_CPOL,
1132         },
1133 #endif
1134 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1135         {
1136                 .modalias = "spidev",
1137                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1138                 .bus_num = 0,
1139                 .chip_select = 1,
1140         },
1141 #endif
1142 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1143         {
1144                 .modalias = "bfin-lq035q1-spi",
1145                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1146                 .bus_num = 0,
1147                 .chip_select = 2,
1148                 .mode = SPI_CPHA | SPI_CPOL,
1149         },
1150 #endif
1151 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1152         {
1153                 .modalias = "enc28j60",
1154                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1155                 .irq = IRQ_PF6,
1156                 .bus_num = 0,
1157                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1158                 .controller_data = &enc28j60_spi_chip_info,
1159                 .mode = SPI_MODE_0,
1160         },
1161 #endif
1162 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1163         {
1164                 .modalias       = "adxl34x",
1165                 .platform_data  = &adxl34x_info,
1166                 .irq            = IRQ_PF6,
1167                 .max_speed_hz   = 5000000,    /* max spi clock (SCK) speed in HZ */
1168                 .bus_num        = 0,
1169                 .chip_select    = 2,
1170                 .mode = SPI_MODE_3,
1171         },
1172 #endif
1173 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1174         {
1175                 .modalias = "adf702x",
1176                 .max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
1177                 .bus_num = 0,
1178                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1179                 .platform_data = &adf7021_platform_data,
1180                 .mode = SPI_MODE_0,
1181         },
1182 #endif
1183 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1184         {
1185                 .modalias = "ads7846",
1186                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1187                 .bus_num = 0,
1188                 .irq = IRQ_PF6,
1189                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1190                 .platform_data = &ad7873_pdata,
1191                 .mode = SPI_MODE_0,
1192         },
1193 #endif
1194 #if defined(CONFIG_AD7476) \
1195         || defined(CONFIG_AD7476_MODULE)
1196         {
1197                 .modalias = "ad7476", /* Name of spi_driver for this device */
1198                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
1199                 .bus_num = 0, /* Framework bus number */
1200                 .chip_select = 1, /* Framework chip select. */
1201                 .platform_data = NULL, /* No spi_driver specific config */
1202                 .controller_data = &spi_ad7476_chip_info,
1203                 .mode = SPI_MODE_3,
1204         },
1205 #endif
1206 #if defined(CONFIG_ADE7753) \
1207         || defined(CONFIG_ADE7753_MODULE)
1208         {
1209                 .modalias = "ade7753",
1210                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1211                 .bus_num = 0,
1212                 .chip_select = 1, /* CS, change it for your board */
1213                 .platform_data = NULL, /* No spi_driver specific config */
1214                 .mode = SPI_MODE_1,
1215         },
1216 #endif
1217 #if defined(CONFIG_ADE7754) \
1218         || defined(CONFIG_ADE7754_MODULE)
1219         {
1220                 .modalias = "ade7754",
1221                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1222                 .bus_num = 0,
1223                 .chip_select = 1, /* CS, change it for your board */
1224                 .platform_data = NULL, /* No spi_driver specific config */
1225                 .mode = SPI_MODE_1,
1226         },
1227 #endif
1228 #if defined(CONFIG_ADE7758) \
1229         || defined(CONFIG_ADE7758_MODULE)
1230         {
1231                 .modalias = "ade7758",
1232                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1233                 .bus_num = 0,
1234                 .chip_select = 1, /* CS, change it for your board */
1235                 .platform_data = NULL, /* No spi_driver specific config */
1236                 .mode = SPI_MODE_1,
1237         },
1238 #endif
1239 #if defined(CONFIG_ADE7759) \
1240         || defined(CONFIG_ADE7759_MODULE)
1241         {
1242                 .modalias = "ade7759",
1243                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1244                 .bus_num = 0,
1245                 .chip_select = 1, /* CS, change it for your board */
1246                 .platform_data = NULL, /* No spi_driver specific config */
1247                 .mode = SPI_MODE_1,
1248         },
1249 #endif
1250 #if defined(CONFIG_ADE7854_SPI) \
1251         || defined(CONFIG_ADE7854_SPI_MODULE)
1252         {
1253                 .modalias = "ade7854",
1254                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1255                 .bus_num = 0,
1256                 .chip_select = 1, /* CS, change it for your board */
1257                 .platform_data = NULL, /* No spi_driver specific config */
1258                 .mode = SPI_MODE_3,
1259         },
1260 #endif
1261 #if defined(CONFIG_ADIS16060) \
1262         || defined(CONFIG_ADIS16060_MODULE)
1263         {
1264                 .modalias = "adis16060_r",
1265                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1266                 .bus_num = 0,
1267                 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1268                 .platform_data = NULL, /* No spi_driver specific config */
1269                 .mode = SPI_MODE_0,
1270         },
1271         {
1272                 .modalias = "adis16060_w",
1273                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1274                 .bus_num = 0,
1275                 .chip_select = 2, /* CS for write, change it for your board */
1276                 .platform_data = NULL, /* No spi_driver specific config */
1277                 .mode = SPI_MODE_1,
1278         },
1279 #endif
1280 #if defined(CONFIG_ADIS16130) \
1281         || defined(CONFIG_ADIS16130_MODULE)
1282         {
1283                 .modalias = "adis16130",
1284                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1285                 .bus_num = 0,
1286                 .chip_select = 1, /* CS for read, change it for your board */
1287                 .platform_data = NULL, /* No spi_driver specific config */
1288                 .mode = SPI_MODE_3,
1289         },
1290 #endif
1291 #if defined(CONFIG_ADIS16201) \
1292         || defined(CONFIG_ADIS16201_MODULE)
1293         {
1294                 .modalias = "adis16201",
1295                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1296                 .bus_num = 0,
1297                 .chip_select = 5, /* CS, change it for your board */
1298                 .platform_data = NULL, /* No spi_driver specific config */
1299                 .mode = SPI_MODE_3,
1300                 .irq = IRQ_PF4,
1301         },
1302 #endif
1303 #if defined(CONFIG_ADIS16203) \
1304         || defined(CONFIG_ADIS16203_MODULE)
1305         {
1306                 .modalias = "adis16203",
1307                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1308                 .bus_num = 0,
1309                 .chip_select = 5, /* CS, change it for your board */
1310                 .platform_data = NULL, /* No spi_driver specific config */
1311                 .mode = SPI_MODE_3,
1312                 .irq = IRQ_PF4,
1313         },
1314 #endif
1315 #if defined(CONFIG_ADIS16204) \
1316         || defined(CONFIG_ADIS16204_MODULE)
1317         {
1318                 .modalias = "adis16204",
1319                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1320                 .bus_num = 0,
1321                 .chip_select = 5, /* CS, change it for your board */
1322                 .platform_data = NULL, /* No spi_driver specific config */
1323                 .mode = SPI_MODE_3,
1324                 .irq = IRQ_PF4,
1325         },
1326 #endif
1327 #if defined(CONFIG_ADIS16209) \
1328         || defined(CONFIG_ADIS16209_MODULE)
1329         {
1330                 .modalias = "adis16209",
1331                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1332                 .bus_num = 0,
1333                 .chip_select = 5, /* CS, change it for your board */
1334                 .platform_data = NULL, /* No spi_driver specific config */
1335                 .mode = SPI_MODE_3,
1336                 .irq = IRQ_PF4,
1337         },
1338 #endif
1339 #if defined(CONFIG_ADIS16220) \
1340         || defined(CONFIG_ADIS16220_MODULE)
1341         {
1342                 .modalias = "adis16220",
1343                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1344                 .bus_num = 0,
1345                 .chip_select = 5, /* CS, change it for your board */
1346                 .platform_data = NULL, /* No spi_driver specific config */
1347                 .mode = SPI_MODE_3,
1348                 .irq = IRQ_PF4,
1349         },
1350 #endif
1351 #if defined(CONFIG_ADIS16240) \
1352         || defined(CONFIG_ADIS16240_MODULE)
1353         {
1354                 .modalias = "adis16240",
1355                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1356                 .bus_num = 0,
1357                 .chip_select = 5, /* CS, change it for your board */
1358                 .platform_data = NULL, /* No spi_driver specific config */
1359                 .mode = SPI_MODE_3,
1360                 .irq = IRQ_PF4,
1361         },
1362 #endif
1363 #if defined(CONFIG_ADIS16260) \
1364         || defined(CONFIG_ADIS16260_MODULE)
1365         {
1366                 .modalias = "adis16260",
1367                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1368                 .bus_num = 0,
1369                 .chip_select = 5, /* CS, change it for your board */
1370                 .platform_data = NULL, /* No spi_driver specific config */
1371                 .mode = SPI_MODE_3,
1372                 .irq = IRQ_PF4,
1373         },
1374 #endif
1375 #if defined(CONFIG_ADIS16261) \
1376         || defined(CONFIG_ADIS16261_MODULE)
1377         {
1378                 .modalias = "adis16261",
1379                 .max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
1380                 .bus_num = 0,
1381                 .chip_select = 1, /* CS, change it for your board */
1382                 .platform_data = NULL, /* No spi_driver specific config */
1383                 .mode = SPI_MODE_3,
1384         },
1385 #endif
1386 #if defined(CONFIG_ADIS16300) \
1387         || defined(CONFIG_ADIS16300_MODULE)
1388         {
1389                 .modalias = "adis16300",
1390                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1391                 .bus_num = 0,
1392                 .chip_select = 5, /* CS, change it for your board */
1393                 .platform_data = NULL, /* No spi_driver specific config */
1394                 .mode = SPI_MODE_3,
1395                 .irq = IRQ_PF4,
1396         },
1397 #endif
1398 #if defined(CONFIG_ADIS16350) \
1399         || defined(CONFIG_ADIS16350_MODULE)
1400         {
1401                 .modalias = "adis16364",
1402                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1403                 .bus_num = 0,
1404                 .chip_select = 5, /* CS, change it for your board */
1405                 .platform_data = NULL, /* No spi_driver specific config */
1406                 .mode = SPI_MODE_3,
1407                 .irq = IRQ_PF4,
1408         },
1409 #endif
1410 #if defined(CONFIG_ADIS16400) \
1411         || defined(CONFIG_ADIS16400_MODULE)
1412         {
1413                 .modalias = "adis16400",
1414                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1415                 .bus_num = 0,
1416                 .chip_select = 1, /* CS, change it for your board */
1417                 .platform_data = NULL, /* No spi_driver specific config */
1418                 .mode = SPI_MODE_3,
1419         },
1420 #endif
1421 };
1422
1423 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
1424 /* SPI controller data */
1425 static struct bfin5xx_spi_master bfin_spi0_info = {
1426         .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1427         .enable_dma = 1,  /* master has the ability to do dma transfer */
1428         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1429 };
1430
1431 /* SPI (0) */
1432 static struct resource bfin_spi0_resource[] = {
1433         [0] = {
1434                 .start = SPI0_REGBASE,
1435                 .end   = SPI0_REGBASE + 0xFF,
1436                 .flags = IORESOURCE_MEM,
1437                 },
1438         [1] = {
1439                 .start = CH_SPI,
1440                 .end   = CH_SPI,
1441                 .flags = IORESOURCE_DMA,
1442         },
1443         [2] = {
1444                 .start = IRQ_SPI,
1445                 .end   = IRQ_SPI,
1446                 .flags = IORESOURCE_IRQ,
1447         },
1448 };
1449
1450 static struct platform_device bfin_spi0_device = {
1451         .name = "bfin-spi",
1452         .id = 0, /* Bus number */
1453         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1454         .resource = bfin_spi0_resource,
1455         .dev = {
1456                 .platform_data = &bfin_spi0_info, /* Passed to driver */
1457         },
1458 };
1459 #endif  /* spi master and devices */
1460
1461 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1462
1463 /* SPORT SPI controller data */
1464 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1465         .num_chipselect = MAX_BLACKFIN_GPIOS,
1466         .enable_dma = 0,  /* master don't support DMA */
1467         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1468                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1469 };
1470
1471 static struct resource bfin_sport_spi0_resource[] = {
1472         [0] = {
1473                 .start = SPORT0_TCR1,
1474                 .end   = SPORT0_TCR1 + 0xFF,
1475                 .flags = IORESOURCE_MEM,
1476                 },
1477         [1] = {
1478                 .start = IRQ_SPORT0_ERROR,
1479                 .end   = IRQ_SPORT0_ERROR,
1480                 .flags = IORESOURCE_IRQ,
1481                 },
1482 };
1483
1484 static struct platform_device bfin_sport_spi0_device = {
1485         .name = "bfin-sport-spi",
1486         .id = 1, /* Bus number */
1487         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1488         .resource = bfin_sport_spi0_resource,
1489         .dev = {
1490                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1491         },
1492 };
1493
1494 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1495         .num_chipselect = MAX_BLACKFIN_GPIOS,
1496         .enable_dma = 0,  /* master don't support DMA */
1497         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1498                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1499 };
1500
1501 static struct resource bfin_sport_spi1_resource[] = {
1502         [0] = {
1503                 .start = SPORT1_TCR1,
1504                 .end   = SPORT1_TCR1 + 0xFF,
1505                 .flags = IORESOURCE_MEM,
1506                 },
1507         [1] = {
1508                 .start = IRQ_SPORT1_ERROR,
1509                 .end   = IRQ_SPORT1_ERROR,
1510                 .flags = IORESOURCE_IRQ,
1511                 },
1512 };
1513
1514 static struct platform_device bfin_sport_spi1_device = {
1515         .name = "bfin-sport-spi",
1516         .id = 2, /* Bus number */
1517         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1518         .resource = bfin_sport_spi1_resource,
1519         .dev = {
1520                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1521         },
1522 };
1523
1524 #endif  /* sport spi master and devices */
1525
1526 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1527 static struct platform_device bfin_fb_device = {
1528         .name = "bf537-lq035",
1529 };
1530 #endif
1531
1532 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1533 #include <asm/bfin-lq035q1.h>
1534
1535 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1536         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1537         .ppi_mode = USE_RGB565_16_BIT_PPI,
1538         .use_bl = 0,    /* let something else control the LCD Blacklight */
1539         .gpio_bl = GPIO_PF7,
1540 };
1541
1542 static struct resource bfin_lq035q1_resources[] = {
1543         {
1544                 .start = IRQ_PPI_ERROR,
1545                 .end = IRQ_PPI_ERROR,
1546                 .flags = IORESOURCE_IRQ,
1547         },
1548 };
1549
1550 static struct platform_device bfin_lq035q1_device = {
1551         .name           = "bfin-lq035q1",
1552         .id             = -1,
1553         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
1554         .resource       = bfin_lq035q1_resources,
1555         .dev            = {
1556                 .platform_data = &bfin_lq035q1_data,
1557         },
1558 };
1559 #endif
1560
1561 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
1562         || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
1563 #include <linux/videodev2.h>
1564 #include <media/blackfin/bfin_capture.h>
1565 #include <media/blackfin/ppi.h>
1566
1567 static const unsigned short ppi_req[] = {
1568         P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
1569         P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
1570         P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
1571         0,
1572 };
1573
1574 static const struct ppi_info ppi_info = {
1575         .type = PPI_TYPE_PPI,
1576         .dma_ch = CH_PPI,
1577         .irq_err = IRQ_PPI_ERROR,
1578         .base = (void __iomem *)PPI_CONTROL,
1579         .pin_req = ppi_req,
1580 };
1581
1582 #if defined(CONFIG_VIDEO_VS6624) \
1583         || defined(CONFIG_VIDEO_VS6624_MODULE)
1584 static struct v4l2_input vs6624_inputs[] = {
1585         {
1586                 .index = 0,
1587                 .name = "Camera",
1588                 .type = V4L2_INPUT_TYPE_CAMERA,
1589                 .std = V4L2_STD_UNKNOWN,
1590         },
1591 };
1592
1593 static struct bcap_route vs6624_routes[] = {
1594         {
1595                 .input = 0,
1596                 .output = 0,
1597         },
1598 };
1599
1600 static const unsigned vs6624_ce_pin = GPIO_PF10;
1601
1602 static struct bfin_capture_config bfin_capture_data = {
1603         .card_name = "BF537",
1604         .inputs = vs6624_inputs,
1605         .num_inputs = ARRAY_SIZE(vs6624_inputs),
1606         .routes = vs6624_routes,
1607         .i2c_adapter_id = 0,
1608         .board_info = {
1609                 .type = "vs6624",
1610                 .addr = 0x10,
1611                 .platform_data = (void *)&vs6624_ce_pin,
1612         },
1613         .ppi_info = &ppi_info,
1614         .ppi_control = (PACK_EN | DLEN_8 | XFR_TYPE | 0x0020),
1615 };
1616 #endif
1617
1618 static struct platform_device bfin_capture_device = {
1619         .name = "bfin_capture",
1620         .dev = {
1621                 .platform_data = &bfin_capture_data,
1622         },
1623 };
1624 #endif
1625
1626 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1627 #ifdef CONFIG_SERIAL_BFIN_UART0
1628 static struct resource bfin_uart0_resources[] = {
1629         {
1630                 .start = UART0_THR,
1631                 .end = UART0_GCTL+2,
1632                 .flags = IORESOURCE_MEM,
1633         },
1634         {
1635                 .start = IRQ_UART0_TX,
1636                 .end = IRQ_UART0_TX,
1637                 .flags = IORESOURCE_IRQ,
1638         },
1639         {
1640                 .start = IRQ_UART0_RX,
1641                 .end = IRQ_UART0_RX,
1642                 .flags = IORESOURCE_IRQ,
1643         },
1644         {
1645                 .start = IRQ_UART0_ERROR,
1646                 .end = IRQ_UART0_ERROR,
1647                 .flags = IORESOURCE_IRQ,
1648         },
1649         {
1650                 .start = CH_UART0_TX,
1651                 .end = CH_UART0_TX,
1652                 .flags = IORESOURCE_DMA,
1653         },
1654         {
1655                 .start = CH_UART0_RX,
1656                 .end = CH_UART0_RX,
1657                 .flags = IORESOURCE_DMA,
1658         },
1659 #ifdef CONFIG_BFIN_UART0_CTSRTS
1660         {       /* CTS pin */
1661                 .start = GPIO_PG7,
1662                 .end = GPIO_PG7,
1663                 .flags = IORESOURCE_IO,
1664         },
1665         {       /* RTS pin */
1666                 .start = GPIO_PG6,
1667                 .end = GPIO_PG6,
1668                 .flags = IORESOURCE_IO,
1669         },
1670 #endif
1671 };
1672
1673 static unsigned short bfin_uart0_peripherals[] = {
1674         P_UART0_TX, P_UART0_RX, 0
1675 };
1676
1677 static struct platform_device bfin_uart0_device = {
1678         .name = "bfin-uart",
1679         .id = 0,
1680         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1681         .resource = bfin_uart0_resources,
1682         .dev = {
1683                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1684         },
1685 };
1686 #endif
1687 #ifdef CONFIG_SERIAL_BFIN_UART1
1688 static struct resource bfin_uart1_resources[] = {
1689         {
1690                 .start = UART1_THR,
1691                 .end = UART1_GCTL+2,
1692                 .flags = IORESOURCE_MEM,
1693         },
1694         {
1695                 .start = IRQ_UART1_TX,
1696                 .end = IRQ_UART1_TX,
1697                 .flags = IORESOURCE_IRQ,
1698         },
1699         {
1700                 .start = IRQ_UART1_RX,
1701                 .end = IRQ_UART1_RX,
1702                 .flags = IORESOURCE_IRQ,
1703         },
1704         {
1705                 .start = IRQ_UART1_ERROR,
1706                 .end = IRQ_UART1_ERROR,
1707                 .flags = IORESOURCE_IRQ,
1708         },
1709         {
1710                 .start = CH_UART1_TX,
1711                 .end = CH_UART1_TX,
1712                 .flags = IORESOURCE_DMA,
1713         },
1714         {
1715                 .start = CH_UART1_RX,
1716                 .end = CH_UART1_RX,
1717                 .flags = IORESOURCE_DMA,
1718         },
1719 };
1720
1721 static unsigned short bfin_uart1_peripherals[] = {
1722         P_UART1_TX, P_UART1_RX, 0
1723 };
1724
1725 static struct platform_device bfin_uart1_device = {
1726         .name = "bfin-uart",
1727         .id = 1,
1728         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1729         .resource = bfin_uart1_resources,
1730         .dev = {
1731                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1732         },
1733 };
1734 #endif
1735 #endif
1736
1737 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1738 #ifdef CONFIG_BFIN_SIR0
1739 static struct resource bfin_sir0_resources[] = {
1740         {
1741                 .start = 0xFFC00400,
1742                 .end = 0xFFC004FF,
1743                 .flags = IORESOURCE_MEM,
1744         },
1745         {
1746                 .start = IRQ_UART0_RX,
1747                 .end = IRQ_UART0_RX+1,
1748                 .flags = IORESOURCE_IRQ,
1749         },
1750         {
1751                 .start = CH_UART0_RX,
1752                 .end = CH_UART0_RX+1,
1753                 .flags = IORESOURCE_DMA,
1754         },
1755 };
1756
1757 static struct platform_device bfin_sir0_device = {
1758         .name = "bfin_sir",
1759         .id = 0,
1760         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1761         .resource = bfin_sir0_resources,
1762 };
1763 #endif
1764 #ifdef CONFIG_BFIN_SIR1
1765 static struct resource bfin_sir1_resources[] = {
1766         {
1767                 .start = 0xFFC02000,
1768                 .end = 0xFFC020FF,
1769                 .flags = IORESOURCE_MEM,
1770         },
1771         {
1772                 .start = IRQ_UART1_RX,
1773                 .end = IRQ_UART1_RX+1,
1774                 .flags = IORESOURCE_IRQ,
1775         },
1776         {
1777                 .start = CH_UART1_RX,
1778                 .end = CH_UART1_RX+1,
1779                 .flags = IORESOURCE_DMA,
1780         },
1781 };
1782
1783 static struct platform_device bfin_sir1_device = {
1784         .name = "bfin_sir",
1785         .id = 1,
1786         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1787         .resource = bfin_sir1_resources,
1788 };
1789 #endif
1790 #endif
1791
1792 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1793 static struct resource bfin_twi0_resource[] = {
1794         [0] = {
1795                 .start = TWI0_REGBASE,
1796                 .end   = TWI0_REGBASE,
1797                 .flags = IORESOURCE_MEM,
1798         },
1799         [1] = {
1800                 .start = IRQ_TWI,
1801                 .end   = IRQ_TWI,
1802                 .flags = IORESOURCE_IRQ,
1803         },
1804 };
1805
1806 static struct platform_device i2c_bfin_twi_device = {
1807         .name = "i2c-bfin-twi",
1808         .id = 0,
1809         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1810         .resource = bfin_twi0_resource,
1811 };
1812 #endif
1813
1814 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1815 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1816         [0]      = KEY_GRAVE,
1817         [1]      = KEY_1,
1818         [2]      = KEY_2,
1819         [3]      = KEY_3,
1820         [4]      = KEY_4,
1821         [5]      = KEY_5,
1822         [6]      = KEY_6,
1823         [7]      = KEY_7,
1824         [8]      = KEY_8,
1825         [9]      = KEY_9,
1826         [10]     = KEY_0,
1827         [11]     = KEY_MINUS,
1828         [12]     = KEY_EQUAL,
1829         [13]     = KEY_BACKSLASH,
1830         [15]     = KEY_KP0,
1831         [16]     = KEY_Q,
1832         [17]     = KEY_W,
1833         [18]     = KEY_E,
1834         [19]     = KEY_R,
1835         [20]     = KEY_T,
1836         [21]     = KEY_Y,
1837         [22]     = KEY_U,
1838         [23]     = KEY_I,
1839         [24]     = KEY_O,
1840         [25]     = KEY_P,
1841         [26]     = KEY_LEFTBRACE,
1842         [27]     = KEY_RIGHTBRACE,
1843         [29]     = KEY_KP1,
1844         [30]     = KEY_KP2,
1845         [31]     = KEY_KP3,
1846         [32]     = KEY_A,
1847         [33]     = KEY_S,
1848         [34]     = KEY_D,
1849         [35]     = KEY_F,
1850         [36]     = KEY_G,
1851         [37]     = KEY_H,
1852         [38]     = KEY_J,
1853         [39]     = KEY_K,
1854         [40]     = KEY_L,
1855         [41]     = KEY_SEMICOLON,
1856         [42]     = KEY_APOSTROPHE,
1857         [43]     = KEY_BACKSLASH,
1858         [45]     = KEY_KP4,
1859         [46]     = KEY_KP5,
1860         [47]     = KEY_KP6,
1861         [48]     = KEY_102ND,
1862         [49]     = KEY_Z,
1863         [50]     = KEY_X,
1864         [51]     = KEY_C,
1865         [52]     = KEY_V,
1866         [53]     = KEY_B,
1867         [54]     = KEY_N,
1868         [55]     = KEY_M,
1869         [56]     = KEY_COMMA,
1870         [57]     = KEY_DOT,
1871         [58]     = KEY_SLASH,
1872         [60]     = KEY_KPDOT,
1873         [61]     = KEY_KP7,
1874         [62]     = KEY_KP8,
1875         [63]     = KEY_KP9,
1876         [64]     = KEY_SPACE,
1877         [65]     = KEY_BACKSPACE,
1878         [66]     = KEY_TAB,
1879         [67]     = KEY_KPENTER,
1880         [68]     = KEY_ENTER,
1881         [69]     = KEY_ESC,
1882         [70]     = KEY_DELETE,
1883         [74]     = KEY_KPMINUS,
1884         [76]     = KEY_UP,
1885         [77]     = KEY_DOWN,
1886         [78]     = KEY_RIGHT,
1887         [79]     = KEY_LEFT,
1888 };
1889
1890 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1891         .rows           = 8,
1892         .cols           = 10,
1893         .keymap         = adp5588_keymap,
1894         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1895         .repeat         = 0,
1896 };
1897 #endif
1898
1899 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1900 #include <linux/mfd/adp5520.h>
1901
1902         /*
1903          *  ADP5520/5501 Backlight Data
1904          */
1905
1906 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1907         .fade_in                = ADP5520_FADE_T_1200ms,
1908         .fade_out               = ADP5520_FADE_T_1200ms,
1909         .fade_led_law           = ADP5520_BL_LAW_LINEAR,
1910         .en_ambl_sens           = 1,
1911         .abml_filt              = ADP5520_BL_AMBL_FILT_640ms,
1912         .l1_daylight_max        = ADP5520_BL_CUR_mA(15),
1913         .l1_daylight_dim        = ADP5520_BL_CUR_mA(0),
1914         .l2_office_max          = ADP5520_BL_CUR_mA(7),
1915         .l2_office_dim          = ADP5520_BL_CUR_mA(0),
1916         .l3_dark_max            = ADP5520_BL_CUR_mA(3),
1917         .l3_dark_dim            = ADP5520_BL_CUR_mA(0),
1918         .l2_trip                = ADP5520_L2_COMP_CURR_uA(700),
1919         .l2_hyst                = ADP5520_L2_COMP_CURR_uA(50),
1920         .l3_trip                = ADP5520_L3_COMP_CURR_uA(80),
1921         .l3_hyst                = ADP5520_L3_COMP_CURR_uA(20),
1922 };
1923
1924         /*
1925          *  ADP5520/5501 LEDs Data
1926          */
1927
1928 static struct led_info adp5520_leds[] = {
1929         {
1930                 .name = "adp5520-led1",
1931                 .default_trigger = "none",
1932                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1933         },
1934 #ifdef ADP5520_EN_ALL_LEDS
1935         {
1936                 .name = "adp5520-led2",
1937                 .default_trigger = "none",
1938                 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1939         },
1940         {
1941                 .name = "adp5520-led3",
1942                 .default_trigger = "none",
1943                 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1944         },
1945 #endif
1946 };
1947
1948 static struct adp5520_leds_platform_data adp5520_leds_data = {
1949         .num_leds = ARRAY_SIZE(adp5520_leds),
1950         .leds = adp5520_leds,
1951         .fade_in = ADP5520_FADE_T_600ms,
1952         .fade_out = ADP5520_FADE_T_600ms,
1953         .led_on_time = ADP5520_LED_ONT_600ms,
1954 };
1955
1956         /*
1957          *  ADP5520 GPIO Data
1958          */
1959
1960 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1961         .gpio_start = 50,
1962         .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1963         .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1964 };
1965
1966         /*
1967          *  ADP5520 Keypad Data
1968          */
1969
1970 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1971         [ADP5520_KEY(0, 0)]     = KEY_GRAVE,
1972         [ADP5520_KEY(0, 1)]     = KEY_1,
1973         [ADP5520_KEY(0, 2)]     = KEY_2,
1974         [ADP5520_KEY(0, 3)]     = KEY_3,
1975         [ADP5520_KEY(1, 0)]     = KEY_4,
1976         [ADP5520_KEY(1, 1)]     = KEY_5,
1977         [ADP5520_KEY(1, 2)]     = KEY_6,
1978         [ADP5520_KEY(1, 3)]     = KEY_7,
1979         [ADP5520_KEY(2, 0)]     = KEY_8,
1980         [ADP5520_KEY(2, 1)]     = KEY_9,
1981         [ADP5520_KEY(2, 2)]     = KEY_0,
1982         [ADP5520_KEY(2, 3)]     = KEY_MINUS,
1983         [ADP5520_KEY(3, 0)]     = KEY_EQUAL,
1984         [ADP5520_KEY(3, 1)]     = KEY_BACKSLASH,
1985         [ADP5520_KEY(3, 2)]     = KEY_BACKSPACE,
1986         [ADP5520_KEY(3, 3)]     = KEY_ENTER,
1987 };
1988
1989 static struct adp5520_keys_platform_data adp5520_keys_data = {
1990         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1991         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1992         .keymap         = adp5520_keymap,
1993         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
1994         .repeat         = 0,
1995 };
1996
1997         /*
1998          *  ADP5520/5501 Multifunction Device Init Data
1999          */
2000
2001 static struct adp5520_platform_data adp5520_pdev_data = {
2002         .backlight = &adp5520_backlight_data,
2003         .leds = &adp5520_leds_data,
2004         .gpio = &adp5520_gpio_data,
2005         .keys = &adp5520_keys_data,
2006 };
2007
2008 #endif
2009
2010 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2011 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
2012         .gpio_start = 50,
2013         .pullup_dis_mask = 0,
2014 };
2015 #endif
2016
2017 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2018 #include <linux/i2c/adp8870.h>
2019 static struct led_info adp8870_leds[] = {
2020         {
2021                 .name = "adp8870-led7",
2022                 .default_trigger = "none",
2023                 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
2024         },
2025 };
2026
2027
2028 static struct adp8870_backlight_platform_data adp8870_pdata = {
2029         .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
2030                          ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
2031         .pwm_assign = 0,                                /* 1 = Enables PWM mode */
2032
2033         .bl_fade_in = ADP8870_FADE_T_1200ms,            /* Backlight Fade-In Timer */
2034         .bl_fade_out = ADP8870_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
2035         .bl_fade_law = ADP8870_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
2036
2037         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
2038         .abml_filt = ADP8870_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
2039
2040         .l1_daylight_max = ADP8870_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2041         .l1_daylight_dim = ADP8870_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2042         .l2_bright_max = ADP8870_BL_CUR_mA(14),         /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2043         .l2_bright_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2044         .l3_office_max = ADP8870_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2045         .l3_office_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2046         .l4_indoor_max = ADP8870_BL_CUR_mA(3),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2047         .l4_indor_dim = ADP8870_BL_CUR_mA(0),           /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2048         .l5_dark_max = ADP8870_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2049         .l5_dark_dim = ADP8870_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2050
2051         .l2_trip = ADP8870_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2052         .l2_hyst = ADP8870_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2053         .l3_trip = ADP8870_L3_COMP_CURR_uA(389),        /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2054         .l3_hyst = ADP8870_L3_COMP_CURR_uA(54),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
2055         .l4_trip = ADP8870_L4_COMP_CURR_uA(167),        /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2056         .l4_hyst = ADP8870_L4_COMP_CURR_uA(16),         /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
2057         .l5_trip = ADP8870_L5_COMP_CURR_uA(43),         /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2058         .l5_hyst = ADP8870_L5_COMP_CURR_uA(11),         /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2059
2060         .leds = adp8870_leds,
2061         .num_leds = ARRAY_SIZE(adp8870_leds),
2062         .led_fade_law = ADP8870_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
2063         .led_fade_in = ADP8870_FADE_T_600ms,
2064         .led_fade_out = ADP8870_FADE_T_600ms,
2065         .led_on_time = ADP8870_LED_ONT_200ms,
2066 };
2067 #endif
2068
2069 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2070 #include <linux/i2c/adp8860.h>
2071 static struct led_info adp8860_leds[] = {
2072         {
2073                 .name = "adp8860-led7",
2074                 .default_trigger = "none",
2075                 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2076         },
2077 };
2078
2079 static struct adp8860_backlight_platform_data adp8860_pdata = {
2080         .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2081                          ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2082
2083         .bl_fade_in = ADP8860_FADE_T_1200ms,            /* Backlight Fade-In Timer */
2084         .bl_fade_out = ADP8860_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
2085         .bl_fade_law = ADP8860_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
2086
2087         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
2088         .abml_filt = ADP8860_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
2089
2090         .l1_daylight_max = ADP8860_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2091         .l1_daylight_dim = ADP8860_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2092         .l2_office_max = ADP8860_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2093         .l2_office_dim = ADP8860_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2094         .l3_dark_max = ADP8860_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2095         .l3_dark_dim = ADP8860_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2096
2097         .l2_trip = ADP8860_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2098         .l2_hyst = ADP8860_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2099         .l3_trip = ADP8860_L3_COMP_CURR_uA(43),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2100         .l3_hyst = ADP8860_L3_COMP_CURR_uA(11),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2101
2102         .leds = adp8860_leds,
2103         .num_leds = ARRAY_SIZE(adp8860_leds),
2104         .led_fade_law = ADP8860_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
2105         .led_fade_in = ADP8860_FADE_T_600ms,
2106         .led_fade_out = ADP8860_FADE_T_600ms,
2107         .led_on_time = ADP8860_LED_ONT_200ms,
2108 };
2109 #endif
2110
2111 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2112 static struct regulator_consumer_supply ad5398_consumer = {
2113         .supply = "current",
2114 };
2115
2116 static struct regulator_init_data ad5398_regulator_data = {
2117         .constraints = {
2118                 .name = "current range",
2119                 .max_uA = 120000,
2120                 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2121         },
2122         .num_consumer_supplies = 1,
2123         .consumer_supplies     = &ad5398_consumer,
2124 };
2125
2126 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2127         defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2128 static struct platform_device ad5398_virt_consumer_device = {
2129         .name = "reg-virt-consumer",
2130         .id = 0,
2131         .dev = {
2132                 .platform_data = "current", /* Passed to driver */
2133         },
2134 };
2135 #endif
2136 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2137         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2138 static struct regulator_bulk_data ad5398_bulk_data = {
2139         .supply = "current",
2140 };
2141
2142 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2143         .name = "ad5398",
2144         .num_supplies = 1,
2145         .supplies = &ad5398_bulk_data,
2146 };
2147
2148 static struct platform_device ad5398_userspace_consumer_device = {
2149         .name = "reg-userspace-consumer",
2150         .id = 0,
2151         .dev = {
2152                 .platform_data = &ad5398_userspace_comsumer_data,
2153         },
2154 };
2155 #endif
2156 #endif
2157
2158 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2159 /* INT bound temperature alarm event. line 1 */
2160 static unsigned long adt7410_platform_data[2] = {
2161         IRQ_PG4, IRQF_TRIGGER_LOW,
2162 };
2163 #endif
2164
2165 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2166 /* INT bound temperature alarm event. line 1 */
2167 static unsigned long adt7316_i2c_data[2] = {
2168         IRQF_TRIGGER_LOW, /* interrupt flags */
2169         GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2170 };
2171 #endif
2172
2173 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2174 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
2175         {
2176                 I2C_BOARD_INFO("ad1937", 0x04),
2177         },
2178 #endif
2179
2180 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
2181         {
2182                 I2C_BOARD_INFO("adav803", 0x10),
2183         },
2184 #endif
2185
2186 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
2187         {
2188                 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2189                 .irq = IRQ_PG5,
2190                 .platform_data = (void *)&ad7142_i2c_platform_data,
2191         },
2192 #endif
2193
2194 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
2195         {
2196                 I2C_BOARD_INFO("ad7150", 0x48),
2197                 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2198         },
2199 #endif
2200
2201 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
2202         {
2203                 I2C_BOARD_INFO("ad7152", 0x48),
2204         },
2205 #endif
2206
2207 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
2208         {
2209                 I2C_BOARD_INFO("ad774x", 0x48),
2210         },
2211 #endif
2212
2213 #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
2214         {
2215                 I2C_BOARD_INFO("ade7854", 0x38),
2216         },
2217 #endif
2218
2219 #if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
2220         {
2221                 I2C_BOARD_INFO("adt75", 0x9),
2222                 .irq = IRQ_PG5,
2223         },
2224 #endif
2225
2226 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2227         {
2228                 I2C_BOARD_INFO("adt7410", 0x48),
2229                 /* CT critical temperature event. line 0 */
2230                 .irq = IRQ_PG5,
2231                 .platform_data = (void *)&adt7410_platform_data,
2232         },
2233 #endif
2234
2235 #if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
2236         {
2237                 I2C_BOARD_INFO("ad7291", 0x20),
2238                 .irq = IRQ_PG5,
2239         },
2240 #endif
2241
2242 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2243         {
2244                 I2C_BOARD_INFO("adt7316", 0x48),
2245                 .irq = IRQ_PG6,
2246                 .platform_data = (void *)&adt7316_i2c_data,
2247         },
2248 #endif
2249
2250 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2251         {
2252                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2253         },
2254 #endif
2255 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
2256         {
2257                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2258                 .irq = IRQ_PG6,
2259         },
2260 #endif
2261 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
2262         {
2263                 I2C_BOARD_INFO("ad7879", 0x2F),
2264                 .irq = IRQ_PG5,
2265                 .platform_data = (void *)&bfin_ad7879_ts_info,
2266         },
2267 #endif
2268 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
2269         {
2270                 I2C_BOARD_INFO("adp5588-keys", 0x34),
2271                 .irq = IRQ_PG0,
2272                 .platform_data = (void *)&adp5588_kpad_data,
2273         },
2274 #endif
2275 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
2276         {
2277                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2278                 .irq = IRQ_PG0,
2279                 .platform_data = (void *)&adp5520_pdev_data,
2280         },
2281 #endif
2282 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
2283         {
2284                 I2C_BOARD_INFO("adxl34x", 0x53),
2285                 .irq = IRQ_PG3,
2286                 .platform_data = (void *)&adxl34x_info,
2287         },
2288 #endif
2289 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2290         {
2291                 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2292                 .platform_data = (void *)&adp5588_gpio_data,
2293         },
2294 #endif
2295 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
2296         {
2297                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2298         },
2299 #endif
2300 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2301         {
2302                 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2303         },
2304 #endif
2305 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2306         {
2307                 I2C_BOARD_INFO("adp8870", 0x2B),
2308                 .platform_data = (void *)&adp8870_pdata,
2309         },
2310 #endif
2311 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
2312         {
2313                 I2C_BOARD_INFO("adau1371", 0x1A),
2314         },
2315 #endif
2316 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
2317         {
2318                 I2C_BOARD_INFO("adau1761", 0x38),
2319         },
2320 #endif
2321 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
2322         {
2323                 I2C_BOARD_INFO("adau1361", 0x38),
2324         },
2325 #endif
2326 #if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
2327         {
2328                 I2C_BOARD_INFO("adau1701", 0x34),
2329         },
2330 #endif
2331 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
2332         {
2333                 I2C_BOARD_INFO("ad5258", 0x18),
2334         },
2335 #endif
2336 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
2337         {
2338                 I2C_BOARD_INFO("ssm2602", 0x1b),
2339         },
2340 #endif
2341 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2342         {
2343                 I2C_BOARD_INFO("ad5398", 0xC),
2344                 .platform_data = (void *)&ad5398_regulator_data,
2345         },
2346 #endif
2347 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2348         {
2349                 I2C_BOARD_INFO("adp8860", 0x2A),
2350                 .platform_data = (void *)&adp8860_pdata,
2351         },
2352 #endif
2353 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
2354         {
2355                 I2C_BOARD_INFO("adau1373", 0x1A),
2356         },
2357 #endif
2358 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2359         {
2360                 I2C_BOARD_INFO("ad5252", 0x2e),
2361         },
2362 #endif
2363 };
2364
2365 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2366 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2367 static struct resource bfin_sport0_uart_resources[] = {
2368         {
2369                 .start = SPORT0_TCR1,
2370                 .end = SPORT0_MRCS3+4,
2371                 .flags = IORESOURCE_MEM,
2372         },
2373         {
2374                 .start = IRQ_SPORT0_RX,
2375                 .end = IRQ_SPORT0_RX+1,
2376                 .flags = IORESOURCE_IRQ,
2377         },
2378         {
2379                 .start = IRQ_SPORT0_ERROR,
2380                 .end = IRQ_SPORT0_ERROR,
2381                 .flags = IORESOURCE_IRQ,
2382         },
2383 };
2384
2385 static unsigned short bfin_sport0_peripherals[] = {
2386         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2387         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
2388 };
2389
2390 static struct platform_device bfin_sport0_uart_device = {
2391         .name = "bfin-sport-uart",
2392         .id = 0,
2393         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2394         .resource = bfin_sport0_uart_resources,
2395         .dev = {
2396                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2397         },
2398 };
2399 #endif
2400 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2401 static struct resource bfin_sport1_uart_resources[] = {
2402         {
2403                 .start = SPORT1_TCR1,
2404                 .end = SPORT1_MRCS3+4,
2405                 .flags = IORESOURCE_MEM,
2406         },
2407         {
2408                 .start = IRQ_SPORT1_RX,
2409                 .end = IRQ_SPORT1_RX+1,
2410                 .flags = IORESOURCE_IRQ,
2411         },
2412         {
2413                 .start = IRQ_SPORT1_ERROR,
2414                 .end = IRQ_SPORT1_ERROR,
2415                 .flags = IORESOURCE_IRQ,
2416         },
2417 };
2418
2419 static unsigned short bfin_sport1_peripherals[] = {
2420         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2421         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2422 };
2423
2424 static struct platform_device bfin_sport1_uart_device = {
2425         .name = "bfin-sport-uart",
2426         .id = 1,
2427         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2428         .resource = bfin_sport1_uart_resources,
2429         .dev = {
2430                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2431         },
2432 };
2433 #endif
2434 #endif
2435
2436 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2437 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2438 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2439
2440 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2441 #define PATA_INT        IRQ_PF5
2442 static struct pata_platform_info bfin_pata_platform_data = {
2443         .ioport_shift = 1,
2444         .irq_flags = IRQF_TRIGGER_HIGH,
2445 };
2446
2447 static struct resource bfin_pata_resources[] = {
2448         {
2449                 .start = 0x20314020,
2450                 .end = 0x2031403F,
2451                 .flags = IORESOURCE_MEM,
2452         },
2453         {
2454                 .start = 0x2031401C,
2455                 .end = 0x2031401F,
2456                 .flags = IORESOURCE_MEM,
2457         },
2458         {
2459                 .start = PATA_INT,
2460                 .end = PATA_INT,
2461                 .flags = IORESOURCE_IRQ,
2462         },
2463 };
2464 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2465 static struct pata_platform_info bfin_pata_platform_data = {
2466         .ioport_shift = 0,
2467 };
2468 /* CompactFlash Storage Card Memory Mapped Addressing
2469  * /REG = A11 = 1
2470  */
2471 static struct resource bfin_pata_resources[] = {
2472         {
2473                 .start = 0x20211800,
2474                 .end = 0x20211807,
2475                 .flags = IORESOURCE_MEM,
2476         },
2477         {
2478                 .start = 0x2021180E,    /* Device Ctl */
2479                 .end = 0x2021180E,
2480                 .flags = IORESOURCE_MEM,
2481         },
2482 };
2483 #endif
2484
2485 static struct platform_device bfin_pata_device = {
2486         .name = "pata_platform",
2487         .id = -1,
2488         .num_resources = ARRAY_SIZE(bfin_pata_resources),
2489         .resource = bfin_pata_resources,
2490         .dev = {
2491                 .platform_data = &bfin_pata_platform_data,
2492         }
2493 };
2494 #endif
2495
2496 static const unsigned int cclk_vlev_datasheet[] =
2497 {
2498         VRPAIR(VLEV_085, 250000000),
2499         VRPAIR(VLEV_090, 376000000),
2500         VRPAIR(VLEV_095, 426000000),
2501         VRPAIR(VLEV_100, 426000000),
2502         VRPAIR(VLEV_105, 476000000),
2503         VRPAIR(VLEV_110, 476000000),
2504         VRPAIR(VLEV_115, 476000000),
2505         VRPAIR(VLEV_120, 500000000),
2506         VRPAIR(VLEV_125, 533000000),
2507         VRPAIR(VLEV_130, 600000000),
2508 };
2509
2510 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2511         .tuple_tab = cclk_vlev_datasheet,
2512         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2513         .vr_settling_time = 25 /* us */,
2514 };
2515
2516 static struct platform_device bfin_dpmc = {
2517         .name = "bfin dpmc",
2518         .dev = {
2519                 .platform_data = &bfin_dmpc_vreg_data,
2520         },
2521 };
2522
2523 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
2524         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
2525         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2526
2527 #define SPORT_REQ(x) \
2528         [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2529                 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2530
2531 static const u16 bfin_snd_pin[][7] = {
2532         SPORT_REQ(0),
2533         SPORT_REQ(1),
2534 };
2535
2536 static struct bfin_snd_platform_data bfin_snd_data[] = {
2537         {
2538                 .pin_req = &bfin_snd_pin[0][0],
2539         },
2540         {
2541                 .pin_req = &bfin_snd_pin[1][0],
2542         },
2543 };
2544
2545 #define BFIN_SND_RES(x) \
2546         [x] = { \
2547                 { \
2548                         .start = SPORT##x##_TCR1, \
2549                         .end = SPORT##x##_TCR1, \
2550                         .flags = IORESOURCE_MEM \
2551                 }, \
2552                 { \
2553                         .start = CH_SPORT##x##_RX, \
2554                         .end = CH_SPORT##x##_RX, \
2555                         .flags = IORESOURCE_DMA, \
2556                 }, \
2557                 { \
2558                         .start = CH_SPORT##x##_TX, \
2559                         .end = CH_SPORT##x##_TX, \
2560                         .flags = IORESOURCE_DMA, \
2561                 }, \
2562                 { \
2563                         .start = IRQ_SPORT##x##_ERROR, \
2564                         .end = IRQ_SPORT##x##_ERROR, \
2565                         .flags = IORESOURCE_IRQ, \
2566                 } \
2567         }
2568
2569 static struct resource bfin_snd_resources[][4] = {
2570         BFIN_SND_RES(0),
2571         BFIN_SND_RES(1),
2572 };
2573 #endif
2574
2575 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2576 static struct platform_device bfin_i2s_pcm = {
2577         .name = "bfin-i2s-pcm-audio",
2578         .id = -1,
2579 };
2580 #endif
2581
2582 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2583 static struct platform_device bfin_tdm_pcm = {
2584         .name = "bfin-tdm-pcm-audio",
2585         .id = -1,
2586 };
2587 #endif
2588
2589 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2590 static struct platform_device bfin_ac97_pcm = {
2591         .name = "bfin-ac97-pcm-audio",
2592         .id = -1,
2593 };
2594 #endif
2595
2596 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2597 static struct platform_device bfin_ad73311_codec_device = {
2598         .name = "ad73311",
2599         .id = -1,
2600 };
2601 #endif
2602
2603 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2604         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2605 static struct platform_device bfin_eval_adav801_device = {
2606         .name = "bfin-eval-adav801",
2607         .id = -1,
2608 };
2609 #endif
2610
2611 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2612 static struct platform_device bfin_i2s = {
2613         .name = "bfin-i2s",
2614         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2615         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2616         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2617         .dev = {
2618                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2619         },
2620 };
2621 #endif
2622
2623 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2624 static struct platform_device bfin_tdm = {
2625         .name = "bfin-tdm",
2626         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2627         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2628         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2629         .dev = {
2630                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2631         },
2632 };
2633 #endif
2634
2635 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2636 static struct platform_device bfin_ac97 = {
2637         .name = "bfin-ac97",
2638         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2639         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2640         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2641         .dev = {
2642                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2643         },
2644 };
2645 #endif
2646
2647 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2648 #define REGULATOR_ADP122        "adp122"
2649 #define REGULATOR_ADP122_UV     2500000
2650
2651 static struct regulator_consumer_supply adp122_consumers = {
2652                 .supply = REGULATOR_ADP122,
2653 };
2654
2655 static struct regulator_init_data adp_switch_regulator_data = {
2656         .constraints = {
2657                 .name = REGULATOR_ADP122,
2658                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2659                 .min_uV = REGULATOR_ADP122_UV,
2660                 .max_uV = REGULATOR_ADP122_UV,
2661                 .min_uA = 0,
2662                 .max_uA = 300000,
2663         },
2664         .num_consumer_supplies = 1,     /* only 1 */
2665         .consumer_supplies     = &adp122_consumers,
2666 };
2667
2668 static struct fixed_voltage_config adp_switch_pdata = {
2669         .supply_name = REGULATOR_ADP122,
2670         .microvolts = REGULATOR_ADP122_UV,
2671         .gpio = GPIO_PF2,
2672         .enable_high = 1,
2673         .enabled_at_boot = 0,
2674         .init_data = &adp_switch_regulator_data,
2675 };
2676
2677 static struct platform_device adp_switch_device = {
2678         .name = "reg-fixed-voltage",
2679         .id = 0,
2680         .dev = {
2681                 .platform_data = &adp_switch_pdata,
2682         },
2683 };
2684
2685 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2686         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2687 static struct regulator_bulk_data adp122_bulk_data = {
2688         .supply = REGULATOR_ADP122,
2689 };
2690
2691 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2692         .name = REGULATOR_ADP122,
2693         .num_supplies = 1,
2694         .supplies = &adp122_bulk_data,
2695 };
2696
2697 static struct platform_device adp122_userspace_consumer_device = {
2698         .name = "reg-userspace-consumer",
2699         .id = 0,
2700         .dev = {
2701                 .platform_data = &adp122_userspace_comsumer_data,
2702         },
2703 };
2704 #endif
2705 #endif
2706
2707 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2708         defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2709
2710 static struct resource iio_gpio_trigger_resources[] = {
2711         [0] = {
2712                 .start  = IRQ_PF5,
2713                 .end    = IRQ_PF5,
2714                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2715         },
2716 };
2717
2718 static struct platform_device iio_gpio_trigger = {
2719         .name = "iio_gpio_trigger",
2720         .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2721         .resource = iio_gpio_trigger_resources,
2722 };
2723 #endif
2724
2725 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2726         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2727 static struct platform_device bf5xx_adau1373_device = {
2728         .name = "bfin-eval-adau1373",
2729 };
2730 #endif
2731
2732 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2733         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2734 static struct platform_device bf5xx_adau1701_device = {
2735         .name = "bfin-eval-adau1701",
2736 };
2737 #endif
2738
2739 static struct platform_device *stamp_devices[] __initdata = {
2740
2741         &bfin_dpmc,
2742
2743 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2744         &bfin_pcmcia_cf_device,
2745 #endif
2746
2747 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2748         &rtc_device,
2749 #endif
2750
2751 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2752         &sl811_hcd_device,
2753 #endif
2754
2755 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2756         &isp1362_hcd_device,
2757 #endif
2758
2759 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2760         &bfin_isp1760_device,
2761 #endif
2762
2763 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2764         &smc91x_device,
2765 #endif
2766
2767 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2768         &dm9000_device,
2769 #endif
2770
2771 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2772         &bfin_can_device,
2773 #endif
2774
2775 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2776         &bfin_mii_bus,
2777         &bfin_mac_device,
2778 #endif
2779
2780 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2781         &net2272_bfin_device,
2782 #endif
2783
2784 #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE)
2785         &bfin_spi0_device,
2786 #endif
2787
2788 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2789         &bfin_sport_spi0_device,
2790         &bfin_sport_spi1_device,
2791 #endif
2792
2793 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2794         &bfin_fb_device,
2795 #endif
2796
2797 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2798         &bfin_lq035q1_device,
2799 #endif
2800
2801 #if defined(CONFIG_VIDEO_BLACKFIN_CAPTURE) \
2802         || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
2803         &bfin_capture_device,
2804 #endif
2805
2806 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2807 #ifdef CONFIG_SERIAL_BFIN_UART0
2808         &bfin_uart0_device,
2809 #endif
2810 #ifdef CONFIG_SERIAL_BFIN_UART1
2811         &bfin_uart1_device,
2812 #endif
2813 #endif
2814
2815 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2816 #ifdef CONFIG_BFIN_SIR0
2817         &bfin_sir0_device,
2818 #endif
2819 #ifdef CONFIG_BFIN_SIR1
2820         &bfin_sir1_device,
2821 #endif
2822 #endif
2823
2824 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2825         &i2c_bfin_twi_device,
2826 #endif
2827
2828 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2829 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2830         &bfin_sport0_uart_device,
2831 #endif
2832 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2833         &bfin_sport1_uart_device,
2834 #endif
2835 #endif
2836
2837 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2838         &bfin_pata_device,
2839 #endif
2840
2841 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2842         &bfin_device_gpiokeys,
2843 #endif
2844
2845 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2846         &bfin_async_nand_device,
2847 #endif
2848
2849 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2850         &stamp_flash_device,
2851 #endif
2852
2853 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2854         &bfin_i2s_pcm,
2855 #endif
2856
2857 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2858         &bfin_tdm_pcm,
2859 #endif
2860
2861 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2862         &bfin_ac97_pcm,
2863 #endif
2864
2865 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2866         &bfin_ad73311_codec_device,
2867 #endif
2868
2869 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2870         &bfin_i2s,
2871 #endif
2872
2873 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2874         &bfin_tdm,
2875 #endif
2876
2877 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2878         &bfin_ac97,
2879 #endif
2880
2881 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2882 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2883         defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2884         &ad5398_virt_consumer_device,
2885 #endif
2886 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2887         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2888         &ad5398_userspace_consumer_device,
2889 #endif
2890 #endif
2891
2892 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2893         &adp_switch_device,
2894 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2895         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2896         &adp122_userspace_consumer_device,
2897 #endif
2898 #endif
2899
2900 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2901         defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2902         &iio_gpio_trigger,
2903 #endif
2904
2905 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2906         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2907         &bf5xx_adau1373_device,
2908 #endif
2909
2910 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2911         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2912         &bf5xx_adau1701_device,
2913 #endif
2914
2915 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2916         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2917         &bfin_eval_adav801_device,
2918 #endif
2919 };
2920
2921 static int __init net2272_init(void)
2922 {
2923 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2924         int ret;
2925
2926         ret = gpio_request(GPIO_PF6, "net2272");
2927         if (ret)
2928                 return ret;
2929
2930         /* Reset the USB chip */
2931         gpio_direction_output(GPIO_PF6, 0);
2932         mdelay(2);
2933         gpio_set_value(GPIO_PF6, 1);
2934 #endif
2935
2936         return 0;
2937 }
2938
2939 static int __init stamp_init(void)
2940 {
2941         printk(KERN_INFO "%s(): registering device resources\n", __func__);
2942         bfin_plat_nand_init();
2943         adf702x_mac_init();
2944         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2945         i2c_register_board_info(0, bfin_i2c_board_info,
2946                                 ARRAY_SIZE(bfin_i2c_board_info));
2947         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2948
2949         if (net2272_init())
2950                 pr_warning("unable to configure net2272; it probably won't work\n");
2951
2952         return 0;
2953 }
2954
2955 arch_initcall(stamp_init);
2956
2957
2958 static struct platform_device *stamp_early_devices[] __initdata = {
2959 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2960 #ifdef CONFIG_SERIAL_BFIN_UART0
2961         &bfin_uart0_device,
2962 #endif
2963 #ifdef CONFIG_SERIAL_BFIN_UART1
2964         &bfin_uart1_device,
2965 #endif
2966 #endif
2967
2968 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2969 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2970         &bfin_sport0_uart_device,
2971 #endif
2972 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2973         &bfin_sport1_uart_device,
2974 #endif
2975 #endif
2976 };
2977
2978 void __init native_machine_early_platform_add_devices(void)
2979 {
2980         printk(KERN_INFO "register early platform devices\n");
2981         early_platform_add_devices(stamp_early_devices,
2982                 ARRAY_SIZE(stamp_early_devices));
2983 }
2984
2985 void native_machine_restart(char *cmd)
2986 {
2987         /* workaround reboot hang when booting from SPI */
2988         if ((bfin_read_SYSCR() & 0x7) == 0x3)
2989                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
2990 }
2991
2992 /*
2993  * Currently the MAC address is saved in Flash by U-Boot
2994  */
2995 #define FLASH_MAC       0x203f0000
2996 void bfin_get_ether_addr(char *addr)
2997 {
2998         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
2999         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
3000 }
3001 EXPORT_SYMBOL(bfin_get_ether_addr);