2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/kernel.h>
11 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/nand.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mtd/plat-ram.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/spi/spi.h>
19 #include <linux/spi/flash.h>
20 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
21 #include <linux/usb/isp1362.h>
23 #include <linux/i2c.h>
24 #include <linux/i2c/adp5588.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ata_platform.h>
27 #include <linux/irq.h>
28 #include <linux/interrupt.h>
29 #include <linux/usb/sl811.h>
30 #include <linux/spi/mmc_spi.h>
31 #include <linux/leds.h>
32 #include <linux/input.h>
34 #include <asm/bfin5xx_spi.h>
35 #include <asm/reboot.h>
36 #include <asm/portmux.h>
38 #ifdef CONFIG_REGULATOR_ADP_SWITCH
39 #include <linux/regulator/adp_switch.h>
41 #ifdef CONFIG_REGULATOR_AD5398
42 #include <linux/regulator/ad5398.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/regulator/userspace-consumer.h>
48 * Name the Board for the /proc/cpuinfo
50 const char bfin_board_name[] = "ADI BF537-STAMP";
53 * Driver needs to know address, irq and flag pin.
56 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
57 #include <linux/usb/isp1760.h>
58 static struct resource bfin_isp1760_resources[] = {
61 .end = 0x203C0000 + 0x000fffff,
62 .flags = IORESOURCE_MEM,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
71 static struct isp1760_platform_data isp1760_priv = {
76 .dack_polarity_high = 0,
77 .dreq_polarity_high = 0,
80 static struct platform_device bfin_isp1760_device = {
84 .platform_data = &isp1760_priv,
86 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
87 .resource = bfin_isp1760_resources,
91 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
92 #include <linux/gpio_keys.h>
94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
95 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
96 {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
97 {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
98 {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
102 .buttons = bfin_gpio_keys_table,
103 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
106 static struct platform_device bfin_device_gpiokeys = {
109 .platform_data = &bfin_gpio_keys_data,
114 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
115 static struct resource bfin_pcmcia_cf_resources[] = {
117 .start = 0x20310000, /* IO PORT */
119 .flags = IORESOURCE_MEM,
121 .start = 0x20311000, /* Attribute Memory */
123 .flags = IORESOURCE_MEM,
127 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
129 .start = 6, /* Card Detect PF6 */
131 .flags = IORESOURCE_IRQ,
135 static struct platform_device bfin_pcmcia_cf_device = {
136 .name = "bfin_cf_pcmcia",
138 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
139 .resource = bfin_pcmcia_cf_resources,
143 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
144 static struct platform_device rtc_device = {
150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
151 #include <linux/smc91x.h>
153 static struct smc91x_platdata smc91x_info = {
154 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
155 .leda = RPC_LED_100_10,
156 .ledb = RPC_LED_TX_RX,
159 static struct resource smc91x_resources[] = {
161 .name = "smc91x-regs",
163 .end = 0x20300300 + 16,
164 .flags = IORESOURCE_MEM,
169 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
172 static struct platform_device smc91x_device = {
175 .num_resources = ARRAY_SIZE(smc91x_resources),
176 .resource = smc91x_resources,
178 .platform_data = &smc91x_info,
183 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
184 static struct resource dm9000_resources[] = {
187 .end = 0x203FB800 + 1,
188 .flags = IORESOURCE_MEM,
192 .end = 0x203FB804 + 1,
193 .flags = IORESOURCE_MEM,
198 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
202 static struct platform_device dm9000_device = {
205 .num_resources = ARRAY_SIZE(dm9000_resources),
206 .resource = dm9000_resources,
210 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
211 static struct resource sl811_hcd_resources[] = {
215 .flags = IORESOURCE_MEM,
219 .flags = IORESOURCE_MEM,
223 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
228 void sl811_port_power(struct device *dev, int is_on)
230 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
231 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
235 static struct sl811_platform_data sl811_priv = {
237 .power = 250, /* == 500mA */
238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
239 .port_power = &sl811_port_power,
243 static struct platform_device sl811_hcd_device = {
247 .platform_data = &sl811_priv,
249 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
250 .resource = sl811_hcd_resources,
254 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
255 static struct resource isp1362_hcd_resources[] = {
259 .flags = IORESOURCE_MEM,
263 .flags = IORESOURCE_MEM,
267 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
271 static struct isp1362_platform_data isp1362_priv = {
276 .int_edge_triggered = 0,
277 .remote_wakeup_connected = 0,
278 .no_power_switching = 1,
279 .power_switching_mode = 0,
282 static struct platform_device isp1362_hcd_device = {
283 .name = "isp1362-hcd",
286 .platform_data = &isp1362_priv,
288 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
289 .resource = isp1362_hcd_resources,
293 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
294 unsigned short bfin_can_peripherals[] = {
295 P_CAN0_RX, P_CAN0_TX, 0
298 static struct resource bfin_can_resources[] = {
302 .flags = IORESOURCE_MEM,
307 .flags = IORESOURCE_IRQ,
312 .flags = IORESOURCE_IRQ,
315 .start = IRQ_CAN_ERROR,
316 .end = IRQ_CAN_ERROR,
317 .flags = IORESOURCE_IRQ,
321 static struct platform_device bfin_can_device = {
323 .num_resources = ARRAY_SIZE(bfin_can_resources),
324 .resource = bfin_can_resources,
326 .platform_data = &bfin_can_peripherals, /* Passed to driver */
331 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
332 static struct platform_device bfin_mii_bus = {
333 .name = "bfin_mii_bus",
336 static struct platform_device bfin_mac_device = {
338 .dev.platform_data = &bfin_mii_bus,
342 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
343 static struct resource net2272_bfin_resources[] = {
346 .end = 0x20300000 + 0x100,
347 .flags = IORESOURCE_MEM,
351 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
355 static struct platform_device net2272_bfin_device = {
358 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
359 .resource = net2272_bfin_resources,
363 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
364 #ifdef CONFIG_MTD_PARTITIONS
365 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
367 static struct mtd_partition bfin_plat_nand_partitions[] = {
369 .name = "linux kernel(nand)",
373 .name = "file system(nand)",
374 .size = MTDPART_SIZ_FULL,
375 .offset = MTDPART_OFS_APPEND,
380 #define BFIN_NAND_PLAT_CLE 2
381 #define BFIN_NAND_PLAT_ALE 1
382 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
384 struct nand_chip *this = mtd->priv;
386 if (cmd == NAND_CMD_NONE)
390 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
392 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
395 #define BFIN_NAND_PLAT_READY GPIO_PF3
396 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
398 return gpio_get_value(BFIN_NAND_PLAT_READY);
401 static struct platform_nand_data bfin_plat_nand_data = {
405 #ifdef CONFIG_MTD_PARTITIONS
406 .part_probe_types = part_probes,
407 .partitions = bfin_plat_nand_partitions,
408 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
412 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
413 .dev_ready = bfin_plat_nand_dev_ready,
417 #define MAX(x, y) (x > y ? x : y)
418 static struct resource bfin_plat_nand_resources = {
420 .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
421 .flags = IORESOURCE_IO,
424 static struct platform_device bfin_async_nand_device = {
428 .resource = &bfin_plat_nand_resources,
430 .platform_data = &bfin_plat_nand_data,
434 static void bfin_plat_nand_init(void)
436 gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
439 static void bfin_plat_nand_init(void) {}
442 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
443 static struct mtd_partition stamp_partitions[] = {
445 .name = "bootloader(nor)",
449 .name = "linux kernel(nor)",
451 .offset = MTDPART_OFS_APPEND,
453 .name = "file system(nor)",
454 .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
455 .offset = MTDPART_OFS_APPEND,
457 .name = "MAC Address(nor)",
458 .size = MTDPART_SIZ_FULL,
460 .mask_flags = MTD_WRITEABLE,
464 static struct physmap_flash_data stamp_flash_data = {
466 .parts = stamp_partitions,
467 .nr_parts = ARRAY_SIZE(stamp_partitions),
468 #ifdef CONFIG_ROMKERNEL
469 .probe_type = "map_rom",
473 static struct resource stamp_flash_resource = {
476 .flags = IORESOURCE_MEM,
479 static struct platform_device stamp_flash_device = {
480 .name = "physmap-flash",
483 .platform_data = &stamp_flash_data,
486 .resource = &stamp_flash_resource,
490 #if defined(CONFIG_MTD_M25P80) \
491 || defined(CONFIG_MTD_M25P80_MODULE)
492 static struct mtd_partition bfin_spi_flash_partitions[] = {
494 .name = "bootloader(spi)",
497 .mask_flags = MTD_CAP_ROM
499 .name = "linux kernel(spi)",
501 .offset = MTDPART_OFS_APPEND,
503 .name = "file system(spi)",
504 .size = MTDPART_SIZ_FULL,
505 .offset = MTDPART_OFS_APPEND,
509 static struct flash_platform_data bfin_spi_flash_data = {
511 .parts = bfin_spi_flash_partitions,
512 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
513 /* .type = "m25p64", */
516 /* SPI flash chip (m25p64) */
517 static struct bfin5xx_spi_chip spi_flash_chip_info = {
518 .enable_dma = 0, /* use dma transfer with this chip*/
523 #if defined(CONFIG_BFIN_SPI_ADC) \
524 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
526 static struct bfin5xx_spi_chip spi_adc_chip_info = {
527 .enable_dma = 1, /* use dma transfer with this chip*/
532 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
533 || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
534 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
540 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) \
541 || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
542 static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
548 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
549 #include <linux/input/ad714x.h>
550 static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
555 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
563 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
565 .keycode = BTN_FORWARD,
575 .keycode = BTN_MIDDLE,
580 .keycode = BTN_RIGHT,
590 static struct ad714x_platform_data ad7147_spi_platform_data = {
593 .slider = ad7147_spi_slider_plat,
594 .button = ad7147_spi_button_plat,
596 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
597 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
598 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
599 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
600 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
601 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
602 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
603 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
604 {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
605 {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
606 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
607 {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
609 .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
613 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
614 #include <linux/input/ad714x.h>
615 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
637 static struct ad714x_platform_data ad7142_i2c_platform_data = {
639 .button = ad7142_i2c_button_plat,
641 /* fixme: figure out right setting for all comoponent according
642 * to hardware feature of EVAL-AD7142EB board */
643 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
644 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
645 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
646 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
647 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
648 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
649 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
650 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
651 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
652 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
653 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
654 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
656 .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
660 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
661 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
667 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
668 unsigned short ad2s120x_platform_data[] = {
669 /* used as SAMPLE and RDVEL */
670 GPIO_PF5, GPIO_PF6, 0
673 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
679 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
680 unsigned short ad2s1210_platform_data[] = {
681 /* use as SAMPLE, A0, A1 */
682 GPIO_PF7, GPIO_PF8, GPIO_PF9,
683 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
684 /* the RES0 and RES1 pins */
690 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
696 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
697 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
699 static int bfin_mmc_spi_init(struct device *dev,
700 irqreturn_t (*detect_int)(int, void *), void *data)
702 return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
703 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
706 static void bfin_mmc_spi_exit(struct device *dev, void *data)
708 free_irq(MMC_SPI_CARD_DETECT_INT, data);
711 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
712 .init = bfin_mmc_spi_init,
713 .exit = bfin_mmc_spi_exit,
714 .detect_delay = 100, /* msecs */
717 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
724 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
725 #include <linux/spi/ad7877.h>
726 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
731 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
733 .vref_delay_usecs = 50, /* internal, no capacitor */
736 .pressure_max = 1000,
738 .stopacq_polarity = 1,
739 .first_conversion_delay = 3,
740 .acquisition_time = 1,
742 .pen_down_acc_interval = 1,
746 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
747 #include <linux/spi/ad7879.h>
748 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
749 .model = 7879, /* Model = AD7879 */
750 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
751 .pressure_max = 10000,
753 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
754 .acquisition_time = 1, /* 4us acquisition time per sample */
755 .median = 2, /* do 8 measurements */
756 .averaging = 1, /* take the average of 4 middle samples */
757 .pen_down_acc_interval = 255, /* 9.4 ms */
758 .gpio_export = 1, /* Export GPIO to gpiolib */
759 .gpio_base = -1, /* Dynamic allocation */
763 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
764 #include <linux/input/adxl34x.h>
765 static const struct adxl34x_platform_data adxl34x_info = {
769 .tap_threshold = 0x31,
770 .tap_duration = 0x10,
773 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
774 .act_axis_control = 0xFF,
775 .activity_threshold = 5,
776 .inactivity_threshold = 3,
777 .inactivity_time = 4,
778 .free_fall_threshold = 0x7,
779 .free_fall_time = 0x20,
781 .data_range = ADXL_FULL_RES,
784 .ev_code_x = ABS_X, /* EV_REL */
785 .ev_code_y = ABS_Y, /* EV_REL */
786 .ev_code_z = ABS_Z, /* EV_REL */
788 .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
790 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
791 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
792 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
793 .fifo_mode = ADXL_FIFO_STREAM,
794 .orientation_enable = ADXL_EN_ORIENTATION_3D,
795 .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
796 .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
797 /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
798 .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
802 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
803 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
809 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
810 static struct bfin5xx_spi_chip spidev_chip_info = {
816 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
817 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
823 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
824 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
827 .cs_gpio = GPIO_PF10,
831 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
832 static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
834 .cs_gpio = GPIO_PF10,
837 #include <linux/spi/adf702x.h>
838 #define TXREG 0x0160A470
839 static const u32 adf7021_regs[] = {
858 static struct adf702x_platform_data adf7021_platform_data = {
859 .regs_base = (void *)SPORT1_TCR1,
860 .dma_ch_rx = CH_SPORT1_RX,
861 .dma_ch_tx = CH_SPORT1_TX,
862 .irq_sport_err = IRQ_SPORT1_ERROR,
863 .gpio_int_rfs = GPIO_PF8,
864 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
865 P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
866 .adf702x_model = MODEL_ADF7021,
867 .adf702x_regs = adf7021_regs,
870 static inline void adf702x_mac_init(void)
872 random_ether_addr(adf7021_platform_data.mac_addr);
875 static inline void adf702x_mac_init(void) {}
878 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
879 #include <linux/spi/ads7846.h>
880 static struct bfin5xx_spi_chip ad7873_spi_chip_info = {
884 static int ads7873_get_pendown_state(void)
886 return gpio_get_value(GPIO_PF6);
889 static struct ads7846_platform_data __initdata ad7873_pdata = {
890 .model = 7873, /* AD7873 */
896 .debounce_tol = (~0),
897 .get_pendown_state = ads7873_get_pendown_state,
901 #if defined(CONFIG_MTD_DATAFLASH) \
902 || defined(CONFIG_MTD_DATAFLASH_MODULE)
904 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
906 .name = "bootloader(spi)",
909 .mask_flags = MTD_CAP_ROM
911 .name = "linux kernel(spi)",
913 .offset = MTDPART_OFS_APPEND,
915 .name = "file system(spi)",
916 .size = MTDPART_SIZ_FULL,
917 .offset = MTDPART_OFS_APPEND,
921 static struct flash_platform_data bfin_spi_dataflash_data = {
922 .name = "SPI Dataflash",
923 .parts = bfin_spi_dataflash_partitions,
924 .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
928 static struct bfin5xx_spi_chip data_flash_chip_info = {
929 .enable_dma = 0, /* use dma transfer with this chip*/
934 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
935 static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
936 .enable_dma = 0, /* use dma transfer with this chip*/
941 static struct spi_board_info bfin_spi_board_info[] __initdata = {
942 #if defined(CONFIG_MTD_M25P80) \
943 || defined(CONFIG_MTD_M25P80_MODULE)
945 /* the modalias must be the same as spi device driver name */
946 .modalias = "m25p80", /* Name of spi_driver for this device */
947 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
948 .bus_num = 0, /* Framework bus number */
949 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
950 .platform_data = &bfin_spi_flash_data,
951 .controller_data = &spi_flash_chip_info,
955 #if defined(CONFIG_MTD_DATAFLASH) \
956 || defined(CONFIG_MTD_DATAFLASH_MODULE)
957 { /* DataFlash chip */
958 .modalias = "mtd_dataflash",
959 .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
960 .bus_num = 0, /* Framework bus number */
961 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
962 .platform_data = &bfin_spi_dataflash_data,
963 .controller_data = &data_flash_chip_info,
967 #if defined(CONFIG_BFIN_SPI_ADC) \
968 || defined(CONFIG_BFIN_SPI_ADC_MODULE)
970 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
971 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
972 .bus_num = 0, /* Framework bus number */
973 .chip_select = 1, /* Framework chip select. */
974 .platform_data = NULL, /* No spi_driver specific config */
975 .controller_data = &spi_adc_chip_info,
979 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
980 || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
982 .modalias = "ad183x",
983 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
985 .chip_select = 4,/* CONFIG_SND_BLACKFIN_SPI_PFBIT */
986 .platform_data = "ad1836", /* only includes chip name for the moment */
987 .controller_data = &ad1836_spi_chip_info,
992 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
994 .modalias = "ad193x",
995 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
998 .controller_data = &ad1938_spi_chip_info,
1003 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
1005 .modalias = "ad714x_captouch",
1006 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1011 .platform_data = &ad7147_spi_platform_data,
1012 .controller_data = &ad7147_spi_chip_info,
1016 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1018 .modalias = "ad2s90",
1020 .chip_select = 3, /* change it for your board */
1021 .platform_data = NULL,
1022 .controller_data = &ad2s90_spi_chip_info,
1026 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1028 .modalias = "ad2s120x",
1030 .chip_select = 4, /* CS, change it for your board */
1031 .platform_data = ad2s120x_platform_data,
1032 .controller_data = &ad2s120x_spi_chip_info,
1036 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1038 .modalias = "ad2s1210",
1039 .max_speed_hz = 8192000,
1041 .chip_select = 4, /* CS, change it for your board */
1042 .platform_data = ad2s1210_platform_data,
1043 .controller_data = &ad2s1210_spi_chip_info,
1047 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1049 .modalias = "mmc_spi",
1050 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1053 .platform_data = &bfin_mmc_spi_pdata,
1054 .controller_data = &mmc_spi_chip_info,
1058 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1060 .modalias = "ad7877",
1061 .platform_data = &bfin_ad7877_ts_info,
1063 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
1066 .controller_data = &spi_ad7877_chip_info,
1069 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1071 .modalias = "ad7879",
1072 .platform_data = &bfin_ad7879_ts_info,
1074 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1077 .controller_data = &spi_ad7879_chip_info,
1078 .mode = SPI_CPHA | SPI_CPOL,
1081 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1083 .modalias = "spidev",
1084 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1087 .controller_data = &spidev_chip_info,
1090 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1092 .modalias = "bfin-lq035q1-spi",
1093 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1096 .controller_data = &lq035q1_spi_chip_info,
1097 .mode = SPI_CPHA | SPI_CPOL,
1100 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1102 .modalias = "enc28j60",
1103 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1106 .chip_select = 0, /* GPIO controlled SSEL */
1107 .controller_data = &enc28j60_spi_chip_info,
1111 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1113 .modalias = "adxl34x",
1114 .platform_data = &adxl34x_info,
1116 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1119 .controller_data = &spi_adxl34x_chip_info,
1123 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1125 .modalias = "adf702x",
1126 .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
1128 .chip_select = 0, /* GPIO controlled SSEL */
1129 .controller_data = &adf7021_spi_chip_info,
1130 .platform_data = &adf7021_platform_data,
1134 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1136 .modalias = "ads7846",
1137 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1140 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1141 .controller_data = &ad7873_spi_chip_info,
1142 .platform_data = &ad7873_pdata,
1148 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1149 /* SPI controller data */
1150 static struct bfin5xx_spi_master bfin_spi0_info = {
1151 .num_chipselect = 8,
1152 .enable_dma = 1, /* master has the ability to do dma transfer */
1153 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1157 static struct resource bfin_spi0_resource[] = {
1159 .start = SPI0_REGBASE,
1160 .end = SPI0_REGBASE + 0xFF,
1161 .flags = IORESOURCE_MEM,
1166 .flags = IORESOURCE_DMA,
1171 .flags = IORESOURCE_IRQ,
1175 static struct platform_device bfin_spi0_device = {
1177 .id = 0, /* Bus number */
1178 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1179 .resource = bfin_spi0_resource,
1181 .platform_data = &bfin_spi0_info, /* Passed to driver */
1184 #endif /* spi master and devices */
1186 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1188 /* SPORT SPI controller data */
1189 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1190 .num_chipselect = 1, /* master only supports one device */
1191 .enable_dma = 0, /* master don't support DMA */
1192 .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1193 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1196 static struct resource bfin_sport_spi0_resource[] = {
1198 .start = SPORT0_TCR1,
1199 .end = SPORT0_TCR1 + 0xFF,
1200 .flags = IORESOURCE_MEM,
1203 .start = IRQ_SPORT0_ERROR,
1204 .end = IRQ_SPORT0_ERROR,
1205 .flags = IORESOURCE_IRQ,
1209 static struct platform_device bfin_sport_spi0_device = {
1210 .name = "bfin-sport-spi",
1211 .id = 1, /* Bus number */
1212 .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1213 .resource = bfin_sport_spi0_resource,
1215 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1219 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1220 .num_chipselect = 1, /* master only supports one device */
1221 .enable_dma = 0, /* master don't support DMA */
1222 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1223 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1226 static struct resource bfin_sport_spi1_resource[] = {
1228 .start = SPORT1_TCR1,
1229 .end = SPORT1_TCR1 + 0xFF,
1230 .flags = IORESOURCE_MEM,
1233 .start = IRQ_SPORT1_ERROR,
1234 .end = IRQ_SPORT1_ERROR,
1235 .flags = IORESOURCE_IRQ,
1239 static struct platform_device bfin_sport_spi1_device = {
1240 .name = "bfin-sport-spi",
1241 .id = 2, /* Bus number */
1242 .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1243 .resource = bfin_sport_spi1_resource,
1245 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1249 #endif /* sport spi master and devices */
1251 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1252 static struct platform_device bfin_fb_device = {
1253 .name = "bf537-lq035",
1257 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1258 #include <asm/bfin-lq035q1.h>
1260 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1261 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1262 .ppi_mode = USE_RGB565_16_BIT_PPI,
1263 .use_bl = 0, /* let something else control the LCD Blacklight */
1264 .gpio_bl = GPIO_PF7,
1267 static struct resource bfin_lq035q1_resources[] = {
1269 .start = IRQ_PPI_ERROR,
1270 .end = IRQ_PPI_ERROR,
1271 .flags = IORESOURCE_IRQ,
1275 static struct platform_device bfin_lq035q1_device = {
1276 .name = "bfin-lq035q1",
1278 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
1279 .resource = bfin_lq035q1_resources,
1281 .platform_data = &bfin_lq035q1_data,
1286 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1287 #ifdef CONFIG_SERIAL_BFIN_UART0
1288 static struct resource bfin_uart0_resources[] = {
1291 .end = UART0_GCTL+2,
1292 .flags = IORESOURCE_MEM,
1295 .start = IRQ_UART0_RX,
1296 .end = IRQ_UART0_RX+1,
1297 .flags = IORESOURCE_IRQ,
1300 .start = IRQ_UART0_ERROR,
1301 .end = IRQ_UART0_ERROR,
1302 .flags = IORESOURCE_IRQ,
1305 .start = CH_UART0_TX,
1307 .flags = IORESOURCE_DMA,
1310 .start = CH_UART0_RX,
1312 .flags = IORESOURCE_DMA,
1314 #ifdef CONFIG_BFIN_UART0_CTSRTS
1318 .flags = IORESOURCE_IO,
1323 .flags = IORESOURCE_IO,
1328 unsigned short bfin_uart0_peripherals[] = {
1329 P_UART0_TX, P_UART0_RX, 0
1332 static struct platform_device bfin_uart0_device = {
1333 .name = "bfin-uart",
1335 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1336 .resource = bfin_uart0_resources,
1338 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1342 #ifdef CONFIG_SERIAL_BFIN_UART1
1343 static struct resource bfin_uart1_resources[] = {
1346 .end = UART1_GCTL+2,
1347 .flags = IORESOURCE_MEM,
1350 .start = IRQ_UART1_RX,
1351 .end = IRQ_UART1_RX+1,
1352 .flags = IORESOURCE_IRQ,
1355 .start = IRQ_UART1_ERROR,
1356 .end = IRQ_UART1_ERROR,
1357 .flags = IORESOURCE_IRQ,
1360 .start = CH_UART1_TX,
1362 .flags = IORESOURCE_DMA,
1365 .start = CH_UART1_RX,
1367 .flags = IORESOURCE_DMA,
1371 unsigned short bfin_uart1_peripherals[] = {
1372 P_UART1_TX, P_UART1_RX, 0
1375 static struct platform_device bfin_uart1_device = {
1376 .name = "bfin-uart",
1378 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1379 .resource = bfin_uart1_resources,
1381 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1387 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1388 #ifdef CONFIG_BFIN_SIR0
1389 static struct resource bfin_sir0_resources[] = {
1391 .start = 0xFFC00400,
1393 .flags = IORESOURCE_MEM,
1396 .start = IRQ_UART0_RX,
1397 .end = IRQ_UART0_RX+1,
1398 .flags = IORESOURCE_IRQ,
1401 .start = CH_UART0_RX,
1402 .end = CH_UART0_RX+1,
1403 .flags = IORESOURCE_DMA,
1407 static struct platform_device bfin_sir0_device = {
1410 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1411 .resource = bfin_sir0_resources,
1414 #ifdef CONFIG_BFIN_SIR1
1415 static struct resource bfin_sir1_resources[] = {
1417 .start = 0xFFC02000,
1419 .flags = IORESOURCE_MEM,
1422 .start = IRQ_UART1_RX,
1423 .end = IRQ_UART1_RX+1,
1424 .flags = IORESOURCE_IRQ,
1427 .start = CH_UART1_RX,
1428 .end = CH_UART1_RX+1,
1429 .flags = IORESOURCE_DMA,
1433 static struct platform_device bfin_sir1_device = {
1436 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1437 .resource = bfin_sir1_resources,
1442 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1443 static struct resource bfin_twi0_resource[] = {
1445 .start = TWI0_REGBASE,
1446 .end = TWI0_REGBASE,
1447 .flags = IORESOURCE_MEM,
1452 .flags = IORESOURCE_IRQ,
1456 static struct platform_device i2c_bfin_twi_device = {
1457 .name = "i2c-bfin-twi",
1459 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1460 .resource = bfin_twi0_resource,
1464 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1465 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1479 [13] = KEY_BACKSLASH,
1491 [26] = KEY_LEFTBRACE,
1492 [27] = KEY_RIGHTBRACE,
1505 [41] = KEY_SEMICOLON,
1506 [42] = KEY_APOSTROPHE,
1507 [43] = KEY_BACKSLASH,
1527 [65] = KEY_BACKSPACE,
1540 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1543 .keymap = adp5588_keymap,
1544 .keymapsize = ARRAY_SIZE(adp5588_keymap),
1549 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1550 #include <linux/mfd/adp5520.h>
1553 * ADP5520/5501 Backlight Data
1556 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1557 .fade_in = ADP5520_FADE_T_1200ms,
1558 .fade_out = ADP5520_FADE_T_1200ms,
1559 .fade_led_law = ADP5520_BL_LAW_LINEAR,
1561 .abml_filt = ADP5520_BL_AMBL_FILT_640ms,
1562 .l1_daylight_max = ADP5520_BL_CUR_mA(15),
1563 .l1_daylight_dim = ADP5520_BL_CUR_mA(0),
1564 .l2_office_max = ADP5520_BL_CUR_mA(7),
1565 .l2_office_dim = ADP5520_BL_CUR_mA(0),
1566 .l3_dark_max = ADP5520_BL_CUR_mA(3),
1567 .l3_dark_dim = ADP5520_BL_CUR_mA(0),
1568 .l2_trip = ADP5520_L2_COMP_CURR_uA(700),
1569 .l2_hyst = ADP5520_L2_COMP_CURR_uA(50),
1570 .l3_trip = ADP5520_L3_COMP_CURR_uA(80),
1571 .l3_hyst = ADP5520_L3_COMP_CURR_uA(20),
1575 * ADP5520/5501 LEDs Data
1578 static struct led_info adp5520_leds[] = {
1580 .name = "adp5520-led1",
1581 .default_trigger = "none",
1582 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1584 #ifdef ADP5520_EN_ALL_LEDS
1586 .name = "adp5520-led2",
1587 .default_trigger = "none",
1588 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1591 .name = "adp5520-led3",
1592 .default_trigger = "none",
1593 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1598 static struct adp5520_leds_platform_data adp5520_leds_data = {
1599 .num_leds = ARRAY_SIZE(adp5520_leds),
1600 .leds = adp5520_leds,
1601 .fade_in = ADP5520_FADE_T_600ms,
1602 .fade_out = ADP5520_FADE_T_600ms,
1603 .led_on_time = ADP5520_LED_ONT_600ms,
1610 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1612 .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1613 .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1617 * ADP5520 Keypad Data
1620 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1621 [ADP5520_KEY(0, 0)] = KEY_GRAVE,
1622 [ADP5520_KEY(0, 1)] = KEY_1,
1623 [ADP5520_KEY(0, 2)] = KEY_2,
1624 [ADP5520_KEY(0, 3)] = KEY_3,
1625 [ADP5520_KEY(1, 0)] = KEY_4,
1626 [ADP5520_KEY(1, 1)] = KEY_5,
1627 [ADP5520_KEY(1, 2)] = KEY_6,
1628 [ADP5520_KEY(1, 3)] = KEY_7,
1629 [ADP5520_KEY(2, 0)] = KEY_8,
1630 [ADP5520_KEY(2, 1)] = KEY_9,
1631 [ADP5520_KEY(2, 2)] = KEY_0,
1632 [ADP5520_KEY(2, 3)] = KEY_MINUS,
1633 [ADP5520_KEY(3, 0)] = KEY_EQUAL,
1634 [ADP5520_KEY(3, 1)] = KEY_BACKSLASH,
1635 [ADP5520_KEY(3, 2)] = KEY_BACKSPACE,
1636 [ADP5520_KEY(3, 3)] = KEY_ENTER,
1639 static struct adp5520_keys_platform_data adp5520_keys_data = {
1640 .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1641 .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1642 .keymap = adp5520_keymap,
1643 .keymapsize = ARRAY_SIZE(adp5520_keymap),
1648 * ADP5520/5501 Multifuction Device Init Data
1651 static struct adp5520_platform_data adp5520_pdev_data = {
1652 .backlight = &adp5520_backlight_data,
1653 .leds = &adp5520_leds_data,
1654 .gpio = &adp5520_gpio_data,
1655 .keys = &adp5520_keys_data,
1660 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1661 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
1663 .pullup_dis_mask = 0,
1667 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
1668 #include <linux/i2c/adp8870.h>
1669 static struct led_info adp8870_leds[] = {
1671 .name = "adp8870-led7",
1672 .default_trigger = "none",
1673 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
1678 static struct adp8870_backlight_platform_data adp8870_pdata = {
1679 .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
1680 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
1681 .pwm_assign = 0, /* 1 = Enables PWM mode */
1683 .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */
1684 .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */
1685 .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
1687 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
1688 .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */
1690 .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1691 .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1692 .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1693 .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1694 .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1695 .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1696 .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1697 .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1698 .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1699 .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1701 .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1702 .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1703 .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1704 .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1705 .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1706 .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1707 .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1708 .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1710 .leds = adp8870_leds,
1711 .num_leds = ARRAY_SIZE(adp8870_leds),
1712 .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
1713 .led_fade_in = ADP8870_FADE_T_600ms,
1714 .led_fade_out = ADP8870_FADE_T_600ms,
1715 .led_on_time = ADP8870_LED_ONT_200ms,
1719 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
1720 #include <linux/i2c/adp8860.h>
1721 static struct led_info adp8860_leds[] = {
1723 .name = "adp8860-led7",
1724 .default_trigger = "none",
1725 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
1729 static struct adp8860_backlight_platform_data adp8860_pdata = {
1730 .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
1731 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
1733 .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */
1734 .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */
1735 .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
1737 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
1738 .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */
1740 .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1741 .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1742 .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1743 .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1744 .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1745 .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1747 .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1748 .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1749 .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1750 .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1752 .leds = adp8860_leds,
1753 .num_leds = ARRAY_SIZE(adp8860_leds),
1754 .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
1755 .led_fade_in = ADP8860_FADE_T_600ms,
1756 .led_fade_out = ADP8860_FADE_T_600ms,
1757 .led_on_time = ADP8860_LED_ONT_200ms,
1761 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
1762 static struct regulator_consumer_supply ad5398_consumer = {
1763 .supply = "current",
1766 static struct regulator_init_data ad5398_regulator_data = {
1768 .name = "current range",
1770 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
1772 .num_consumer_supplies = 1,
1773 .consumer_supplies = &ad5398_consumer,
1776 static struct ad5398_platform_data ad5398_i2c_platform_data = {
1778 .current_offset = 4,
1779 .regulator_data = &ad5398_regulator_data,
1782 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
1783 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
1784 static struct platform_device ad5398_virt_consumer_device = {
1785 .name = "reg-virt-consumer",
1788 .platform_data = "current", /* Passed to driver */
1792 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
1793 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
1794 static struct regulator_bulk_data ad5398_bulk_data = {
1795 .supply = "current",
1798 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
1801 .supplies = &ad5398_bulk_data,
1804 static struct platform_device ad5398_userspace_consumer_device = {
1805 .name = "reg-userspace-consumer",
1808 .platform_data = &ad5398_userspace_comsumer_data,
1814 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
1815 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
1817 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
1819 .platform_data = (void *)&ad7142_i2c_platform_data,
1823 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
1825 I2C_BOARD_INFO("ad7150", 0x48),
1826 .irq = IRQ_PG5, /* fixme: use real interrupt number */
1830 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
1832 I2C_BOARD_INFO("ad7152", 0x48),
1836 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
1838 I2C_BOARD_INFO("ad774x", 0x48),
1842 #if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE)
1844 I2C_BOARD_INFO("ad7414", 0x9),
1847 * platform_data pointer is borrwoed by the driver to
1848 * store custimer defined IRQ ALART level mode.
1849 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
1851 .platform_data = (void *)IRQF_TRIGGER_LOW,
1855 #if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE)
1857 I2C_BOARD_INFO("ad7417", 0xb),
1860 * platform_data pointer is borrwoed by the driver to
1861 * store custimer defined IRQ ALART level mode.
1862 * only IRQF_TRIGGER_HIGH and IRQF_TRIGGER_LOW are valid.
1864 .platform_data = (void *)IRQF_TRIGGER_LOW,
1868 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
1870 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1873 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
1875 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1879 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1881 I2C_BOARD_INFO("ad7879", 0x2F),
1883 .platform_data = (void *)&bfin_ad7879_ts_info,
1886 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1888 I2C_BOARD_INFO("adp5588-keys", 0x34),
1890 .platform_data = (void *)&adp5588_kpad_data,
1893 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1895 I2C_BOARD_INFO("pmic-adp5520", 0x32),
1897 .platform_data = (void *)&adp5520_pdev_data,
1900 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1902 I2C_BOARD_INFO("adxl34x", 0x53),
1904 .platform_data = (void *)&adxl34x_info,
1907 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1909 I2C_BOARD_INFO("adp5588-gpio", 0x34),
1910 .platform_data = (void *)&adp5588_gpio_data,
1913 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1915 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
1918 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1920 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2C),
1923 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
1925 I2C_BOARD_INFO("adp8870", 0x2B),
1926 .platform_data = (void *)&adp8870_pdata,
1929 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
1931 I2C_BOARD_INFO("adau1371", 0x1A),
1934 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
1936 I2C_BOARD_INFO("adau1761", 0x38),
1939 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
1941 I2C_BOARD_INFO("adau1361", 0x38),
1944 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
1946 I2C_BOARD_INFO("ad5258", 0x18),
1949 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
1951 I2C_BOARD_INFO("ssm2602", 0x1b),
1954 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
1956 I2C_BOARD_INFO("ad5398", 0xC),
1957 .platform_data = (void *)&ad5398_i2c_platform_data,
1960 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
1962 I2C_BOARD_INFO("adp8860", 0x2A),
1963 .platform_data = (void *)&adp8860_pdata,
1968 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1969 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1970 static struct resource bfin_sport0_uart_resources[] = {
1972 .start = SPORT0_TCR1,
1973 .end = SPORT0_MRCS3+4,
1974 .flags = IORESOURCE_MEM,
1977 .start = IRQ_SPORT0_RX,
1978 .end = IRQ_SPORT0_RX+1,
1979 .flags = IORESOURCE_IRQ,
1982 .start = IRQ_SPORT0_ERROR,
1983 .end = IRQ_SPORT0_ERROR,
1984 .flags = IORESOURCE_IRQ,
1988 unsigned short bfin_sport0_peripherals[] = {
1989 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1990 P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
1993 static struct platform_device bfin_sport0_uart_device = {
1994 .name = "bfin-sport-uart",
1996 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1997 .resource = bfin_sport0_uart_resources,
1999 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2003 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2004 static struct resource bfin_sport1_uart_resources[] = {
2006 .start = SPORT1_TCR1,
2007 .end = SPORT1_MRCS3+4,
2008 .flags = IORESOURCE_MEM,
2011 .start = IRQ_SPORT1_RX,
2012 .end = IRQ_SPORT1_RX+1,
2013 .flags = IORESOURCE_IRQ,
2016 .start = IRQ_SPORT1_ERROR,
2017 .end = IRQ_SPORT1_ERROR,
2018 .flags = IORESOURCE_IRQ,
2022 unsigned short bfin_sport1_peripherals[] = {
2023 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2024 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
2027 static struct platform_device bfin_sport1_uart_device = {
2028 .name = "bfin-sport-uart",
2030 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2031 .resource = bfin_sport1_uart_resources,
2033 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2039 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2040 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2041 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2043 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2044 #define PATA_INT IRQ_PF5
2045 static struct pata_platform_info bfin_pata_platform_data = {
2047 .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
2050 static struct resource bfin_pata_resources[] = {
2052 .start = 0x20314020,
2054 .flags = IORESOURCE_MEM,
2057 .start = 0x2031401C,
2059 .flags = IORESOURCE_MEM,
2064 .flags = IORESOURCE_IRQ,
2067 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2068 static struct pata_platform_info bfin_pata_platform_data = {
2071 /* CompactFlash Storage Card Memory Mapped Adressing
2074 static struct resource bfin_pata_resources[] = {
2076 .start = 0x20211800,
2078 .flags = IORESOURCE_MEM,
2081 .start = 0x2021180E, /* Device Ctl */
2083 .flags = IORESOURCE_MEM,
2088 static struct platform_device bfin_pata_device = {
2089 .name = "pata_platform",
2091 .num_resources = ARRAY_SIZE(bfin_pata_resources),
2092 .resource = bfin_pata_resources,
2094 .platform_data = &bfin_pata_platform_data,
2099 static const unsigned int cclk_vlev_datasheet[] =
2101 VRPAIR(VLEV_085, 250000000),
2102 VRPAIR(VLEV_090, 376000000),
2103 VRPAIR(VLEV_095, 426000000),
2104 VRPAIR(VLEV_100, 426000000),
2105 VRPAIR(VLEV_105, 476000000),
2106 VRPAIR(VLEV_110, 476000000),
2107 VRPAIR(VLEV_115, 476000000),
2108 VRPAIR(VLEV_120, 500000000),
2109 VRPAIR(VLEV_125, 533000000),
2110 VRPAIR(VLEV_130, 600000000),
2113 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2114 .tuple_tab = cclk_vlev_datasheet,
2115 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2116 .vr_settling_time = 25 /* us */,
2119 static struct platform_device bfin_dpmc = {
2120 .name = "bfin dpmc",
2122 .platform_data = &bfin_dmpc_vreg_data,
2126 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2127 static struct platform_device bfin_i2s = {
2129 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2130 /* TODO: add platform data here */
2134 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2135 static struct platform_device bfin_tdm = {
2137 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2138 /* TODO: add platform data here */
2142 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2143 static struct platform_device bfin_ac97 = {
2144 .name = "bfin-ac97",
2145 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2146 /* TODO: add platform data here */
2150 #if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
2151 #define REGULATOR_ADP122 "adp122"
2152 #define REGULATOR_ADP150 "adp150"
2154 static struct regulator_consumer_supply adp122_consumers = {
2155 .supply = REGULATOR_ADP122,
2158 static struct regulator_consumer_supply adp150_consumers = {
2159 .supply = REGULATOR_ADP150,
2162 static struct regulator_init_data adp_switch_regulator_data[] = {
2165 .name = REGULATOR_ADP122,
2166 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2170 .num_consumer_supplies = 1, /* only 1 */
2171 .consumer_supplies = &adp122_consumers,
2172 .driver_data = (void *)GPIO_PF2, /* gpio port only */
2176 .name = REGULATOR_ADP150,
2177 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2181 .num_consumer_supplies = 1, /* only 1 */
2182 .consumer_supplies = &adp150_consumers,
2183 .driver_data = (void *)GPIO_PF3, /* gpio port only */
2187 static struct adp_switch_platform_data adp_switch_pdata = {
2188 .regulator_num = ARRAY_SIZE(adp_switch_regulator_data),
2189 .regulator_data = adp_switch_regulator_data,
2192 static struct platform_device adp_switch_device = {
2193 .name = "adp_switch",
2196 .platform_data = &adp_switch_pdata,
2200 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2201 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2202 static struct regulator_bulk_data adp122_bulk_data = {
2203 .supply = REGULATOR_ADP122,
2206 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2207 .name = REGULATOR_ADP122,
2209 .supplies = &adp122_bulk_data,
2212 static struct platform_device adp122_userspace_consumer_device = {
2213 .name = "reg-userspace-consumer",
2216 .platform_data = &adp122_userspace_comsumer_data,
2220 static struct regulator_bulk_data adp150_bulk_data = {
2221 .supply = REGULATOR_ADP150,
2224 static struct regulator_userspace_consumer_data adp150_userspace_comsumer_data = {
2225 .name = REGULATOR_ADP150,
2227 .supplies = &adp150_bulk_data,
2230 static struct platform_device adp150_userspace_consumer_device = {
2231 .name = "reg-userspace-consumer",
2234 .platform_data = &adp150_userspace_comsumer_data,
2241 static struct platform_device *stamp_devices[] __initdata = {
2245 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2246 &bfin_pcmcia_cf_device,
2249 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2253 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2257 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2258 &isp1362_hcd_device,
2261 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2262 &bfin_isp1760_device,
2265 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2269 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2273 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2277 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2282 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2283 &net2272_bfin_device,
2286 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
2290 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2291 &bfin_sport_spi0_device,
2292 &bfin_sport_spi1_device,
2295 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2299 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2300 &bfin_lq035q1_device,
2303 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2304 #ifdef CONFIG_SERIAL_BFIN_UART0
2307 #ifdef CONFIG_SERIAL_BFIN_UART1
2312 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2313 #ifdef CONFIG_BFIN_SIR0
2316 #ifdef CONFIG_BFIN_SIR1
2321 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2322 &i2c_bfin_twi_device,
2325 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2326 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2327 &bfin_sport0_uart_device,
2329 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2330 &bfin_sport1_uart_device,
2334 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2338 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2339 &bfin_device_gpiokeys,
2342 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2343 &bfin_async_nand_device,
2346 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2347 &stamp_flash_device,
2350 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2354 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2358 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2361 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2362 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2363 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2364 &ad5398_virt_consumer_device,
2366 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2367 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2368 &ad5398_userspace_consumer_device,
2372 #if defined(CONFIG_REGULATOR_ADP_SWITCH) || defined(CONFIG_REGULATOR_ADP_SWITCH_MODULE)
2374 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2375 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2376 &adp122_userspace_consumer_device,
2377 &adp150_userspace_consumer_device,
2382 static int __init stamp_init(void)
2384 printk(KERN_INFO "%s(): registering device resources\n", __func__);
2385 bfin_plat_nand_init();
2387 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2388 i2c_register_board_info(0, bfin_i2c_board_info,
2389 ARRAY_SIZE(bfin_i2c_board_info));
2390 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2395 arch_initcall(stamp_init);
2398 static struct platform_device *stamp_early_devices[] __initdata = {
2399 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2400 #ifdef CONFIG_SERIAL_BFIN_UART0
2403 #ifdef CONFIG_SERIAL_BFIN_UART1
2408 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2409 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2410 &bfin_sport0_uart_device,
2412 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2413 &bfin_sport1_uart_device,
2418 void __init native_machine_early_platform_add_devices(void)
2420 printk(KERN_INFO "register early platform devices\n");
2421 early_platform_add_devices(stamp_early_devices,
2422 ARRAY_SIZE(stamp_early_devices));
2425 void native_machine_restart(char *cmd)
2427 /* workaround reboot hang when booting from SPI */
2428 if ((bfin_read_SYSCR() & 0x7) == 0x3)
2429 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
2433 * Currently the MAC address is saved in Flash by U-Boot
2435 #define FLASH_MAC 0x203f0000
2436 void bfin_get_ether_addr(char *addr)
2438 *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
2439 *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
2441 EXPORT_SYMBOL(bfin_get_ether_addr);