2 * Copyright 2004-2009 Analog Devices Inc.
3 * 2005 National ICT Australia (NICTA)
4 * Aidan Williams <aidan@nicta.com.au>
6 * Licensed under the GPL-2 or later.
9 #include <linux/device.h>
10 #include <linux/export.h>
11 #include <linux/kernel.h>
12 #include <linux/platform_device.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/nand.h>
16 #include <linux/mtd/partitions.h>
17 #include <linux/mtd/plat-ram.h>
18 #include <linux/mtd/physmap.h>
19 #include <linux/spi/spi.h>
20 #include <linux/spi/flash.h>
21 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
22 #include <linux/usb/isp1362.h>
24 #include <linux/i2c.h>
25 #include <linux/i2c/adp5588.h>
26 #include <linux/etherdevice.h>
27 #include <linux/ata_platform.h>
28 #include <linux/irq.h>
29 #include <linux/interrupt.h>
30 #include <linux/usb/sl811.h>
31 #include <linux/spi/mmc_spi.h>
32 #include <linux/leds.h>
33 #include <linux/input.h>
35 #include <asm/bfin5xx_spi.h>
36 #include <asm/reboot.h>
37 #include <asm/portmux.h>
39 #include <asm/bfin_sport.h>
40 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
41 #include <linux/regulator/fixed.h>
43 #include <linux/regulator/machine.h>
44 #include <linux/regulator/consumer.h>
45 #include <linux/regulator/userspace-consumer.h>
48 * Name the Board for the /proc/cpuinfo
50 const char bfin_board_name[] = "ADI BF537-STAMP";
53 * Driver needs to know address, irq and flag pin.
56 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
57 #include <linux/usb/isp1760.h>
58 static struct resource bfin_isp1760_resources[] = {
61 .end = 0x203C0000 + 0x000fffff,
62 .flags = IORESOURCE_MEM,
67 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
71 static struct isp1760_platform_data isp1760_priv = {
76 .dack_polarity_high = 0,
77 .dreq_polarity_high = 0,
80 static struct platform_device bfin_isp1760_device = {
84 .platform_data = &isp1760_priv,
86 .num_resources = ARRAY_SIZE(bfin_isp1760_resources),
87 .resource = bfin_isp1760_resources,
91 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
92 #include <linux/gpio_keys.h>
94 static struct gpio_keys_button bfin_gpio_keys_table[] = {
95 {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
96 {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
97 {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
98 {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
101 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
102 .buttons = bfin_gpio_keys_table,
103 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
106 static struct platform_device bfin_device_gpiokeys = {
109 .platform_data = &bfin_gpio_keys_data,
114 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
115 static struct resource bfin_pcmcia_cf_resources[] = {
117 .start = 0x20310000, /* IO PORT */
119 .flags = IORESOURCE_MEM,
121 .start = 0x20311000, /* Attribute Memory */
123 .flags = IORESOURCE_MEM,
127 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
129 .start = 6, /* Card Detect PF6 */
131 .flags = IORESOURCE_IRQ,
135 static struct platform_device bfin_pcmcia_cf_device = {
136 .name = "bfin_cf_pcmcia",
138 .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
139 .resource = bfin_pcmcia_cf_resources,
143 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
144 static struct platform_device rtc_device = {
150 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
151 #include <linux/smc91x.h>
153 static struct smc91x_platdata smc91x_info = {
154 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
155 .leda = RPC_LED_100_10,
156 .ledb = RPC_LED_TX_RX,
159 static struct resource smc91x_resources[] = {
161 .name = "smc91x-regs",
163 .end = 0x20300300 + 16,
164 .flags = IORESOURCE_MEM,
169 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
172 static struct platform_device smc91x_device = {
175 .num_resources = ARRAY_SIZE(smc91x_resources),
176 .resource = smc91x_resources,
178 .platform_data = &smc91x_info,
183 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
184 static struct resource dm9000_resources[] = {
187 .end = 0x203FB800 + 1,
188 .flags = IORESOURCE_MEM,
192 .end = 0x203FB804 + 1,
193 .flags = IORESOURCE_MEM,
198 .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
202 static struct platform_device dm9000_device = {
205 .num_resources = ARRAY_SIZE(dm9000_resources),
206 .resource = dm9000_resources,
210 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
211 static struct resource sl811_hcd_resources[] = {
215 .flags = IORESOURCE_MEM,
219 .flags = IORESOURCE_MEM,
223 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
227 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
228 void sl811_port_power(struct device *dev, int is_on)
230 gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
231 gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
235 static struct sl811_platform_data sl811_priv = {
237 .power = 250, /* == 500mA */
238 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
239 .port_power = &sl811_port_power,
243 static struct platform_device sl811_hcd_device = {
247 .platform_data = &sl811_priv,
249 .num_resources = ARRAY_SIZE(sl811_hcd_resources),
250 .resource = sl811_hcd_resources,
254 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
255 static struct resource isp1362_hcd_resources[] = {
259 .flags = IORESOURCE_MEM,
263 .flags = IORESOURCE_MEM,
267 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
271 static struct isp1362_platform_data isp1362_priv = {
276 .int_edge_triggered = 0,
277 .remote_wakeup_connected = 0,
278 .no_power_switching = 1,
279 .power_switching_mode = 0,
282 static struct platform_device isp1362_hcd_device = {
283 .name = "isp1362-hcd",
286 .platform_data = &isp1362_priv,
288 .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
289 .resource = isp1362_hcd_resources,
293 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
294 static unsigned short bfin_can_peripherals[] = {
295 P_CAN0_RX, P_CAN0_TX, 0
298 static struct resource bfin_can_resources[] = {
302 .flags = IORESOURCE_MEM,
307 .flags = IORESOURCE_IRQ,
312 .flags = IORESOURCE_IRQ,
315 .start = IRQ_CAN_ERROR,
316 .end = IRQ_CAN_ERROR,
317 .flags = IORESOURCE_IRQ,
321 static struct platform_device bfin_can_device = {
323 .num_resources = ARRAY_SIZE(bfin_can_resources),
324 .resource = bfin_can_resources,
326 .platform_data = &bfin_can_peripherals, /* Passed to driver */
331 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
332 #include <linux/bfin_mac.h>
333 static const unsigned short bfin_mac_peripherals[] = P_MII0;
335 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
338 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
342 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
344 .phydev_data = bfin_phydev_data,
345 .phy_mode = PHY_INTERFACE_MODE_MII,
346 .mac_peripherals = bfin_mac_peripherals,
349 static struct platform_device bfin_mii_bus = {
350 .name = "bfin_mii_bus",
352 .platform_data = &bfin_mii_bus_data,
356 static struct platform_device bfin_mac_device = {
359 .platform_data = &bfin_mii_bus,
364 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
365 static struct resource net2272_bfin_resources[] = {
368 .end = 0x20300000 + 0x100,
369 .flags = IORESOURCE_MEM,
372 .flags = IORESOURCE_BUS,
376 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
380 static struct platform_device net2272_bfin_device = {
383 .num_resources = ARRAY_SIZE(net2272_bfin_resources),
384 .resource = net2272_bfin_resources,
388 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
389 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
391 static struct mtd_partition bfin_plat_nand_partitions[] = {
393 .name = "linux kernel(nand)",
397 .name = "file system(nand)",
398 .size = MTDPART_SIZ_FULL,
399 .offset = MTDPART_OFS_APPEND,
403 #define BFIN_NAND_PLAT_CLE 2
404 #define BFIN_NAND_PLAT_ALE 1
405 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
407 struct nand_chip *this = mtd->priv;
409 if (cmd == NAND_CMD_NONE)
413 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
415 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
418 #define BFIN_NAND_PLAT_READY GPIO_PF3
419 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
421 return gpio_get_value(BFIN_NAND_PLAT_READY);
424 static struct platform_nand_data bfin_plat_nand_data = {
428 .part_probe_types = part_probes,
429 .partitions = bfin_plat_nand_partitions,
430 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
433 .cmd_ctrl = bfin_plat_nand_cmd_ctrl,
434 .dev_ready = bfin_plat_nand_dev_ready,
438 #define MAX(x, y) (x > y ? x : y)
439 static struct resource bfin_plat_nand_resources = {
441 .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
442 .flags = IORESOURCE_MEM,
445 static struct platform_device bfin_async_nand_device = {
449 .resource = &bfin_plat_nand_resources,
451 .platform_data = &bfin_plat_nand_data,
455 static void bfin_plat_nand_init(void)
457 gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
460 static void bfin_plat_nand_init(void) {}
463 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
464 static struct mtd_partition stamp_partitions[] = {
466 .name = "bootloader(nor)",
470 .name = "linux kernel(nor)",
472 .offset = MTDPART_OFS_APPEND,
474 .name = "file system(nor)",
475 .size = 0x400000 - 0x40000 - 0x180000 - 0x10000,
476 .offset = MTDPART_OFS_APPEND,
478 .name = "MAC Address(nor)",
479 .size = MTDPART_SIZ_FULL,
481 .mask_flags = MTD_WRITEABLE,
485 static struct physmap_flash_data stamp_flash_data = {
487 .parts = stamp_partitions,
488 .nr_parts = ARRAY_SIZE(stamp_partitions),
489 #ifdef CONFIG_ROMKERNEL
490 .probe_type = "map_rom",
494 static struct resource stamp_flash_resource = {
497 .flags = IORESOURCE_MEM,
500 static struct platform_device stamp_flash_device = {
501 .name = "physmap-flash",
504 .platform_data = &stamp_flash_data,
507 .resource = &stamp_flash_resource,
511 #if defined(CONFIG_MTD_M25P80) \
512 || defined(CONFIG_MTD_M25P80_MODULE)
513 static struct mtd_partition bfin_spi_flash_partitions[] = {
515 .name = "bootloader(spi)",
518 .mask_flags = MTD_CAP_ROM
520 .name = "linux kernel(spi)",
522 .offset = MTDPART_OFS_APPEND,
524 .name = "file system(spi)",
525 .size = MTDPART_SIZ_FULL,
526 .offset = MTDPART_OFS_APPEND,
530 static struct flash_platform_data bfin_spi_flash_data = {
532 .parts = bfin_spi_flash_partitions,
533 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
534 /* .type = "m25p64", */
537 /* SPI flash chip (m25p64) */
538 static struct bfin5xx_spi_chip spi_flash_chip_info = {
539 .enable_dma = 0, /* use dma transfer with this chip*/
543 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
544 #include <linux/input/ad714x.h>
546 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
554 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
556 .keycode = BTN_FORWARD,
566 .keycode = BTN_MIDDLE,
571 .keycode = BTN_RIGHT,
581 static struct ad714x_platform_data ad7147_spi_platform_data = {
584 .slider = ad7147_spi_slider_plat,
585 .button = ad7147_spi_button_plat,
587 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
588 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
589 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
590 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
591 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
592 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
593 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
594 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
595 {0xFF7B, 0x3FFF, 0x506, 0x2626, 1100, 1100, 1150, 1150},
596 {0xFDFE, 0x3FFF, 0x606, 0x2626, 1100, 1100, 1150, 1150},
597 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
598 {0xFFEF, 0x1FFF, 0x0, 0x2626, 1100, 1100, 1150, 1150},
600 .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
604 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
605 #include <linux/input/ad714x.h>
606 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
628 static struct ad714x_platform_data ad7142_i2c_platform_data = {
630 .button = ad7142_i2c_button_plat,
632 /* fixme: figure out right setting for all comoponent according
633 * to hardware feature of EVAL-AD7142EB board */
634 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
635 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
636 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
637 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
638 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
639 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
640 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
641 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
642 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
643 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
644 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
645 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
647 .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
651 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
652 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
657 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
658 static unsigned short ad2s120x_platform_data[] = {
659 /* used as SAMPLE and RDVEL */
660 GPIO_PF5, GPIO_PF6, 0
663 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
668 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
669 static unsigned short ad2s1210_platform_data[] = {
670 /* use as SAMPLE, A0, A1 */
671 GPIO_PF7, GPIO_PF8, GPIO_PF9,
672 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
673 /* the RES0 and RES1 pins */
679 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
684 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
685 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
690 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
691 static unsigned short ad7816_platform_data[] = {
692 GPIO_PF4, /* rdwr_pin */
693 GPIO_PF5, /* convert_pin */
694 GPIO_PF7, /* busy_pin */
698 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
703 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
704 static unsigned long adt7310_platform_data[3] = {
705 /* INT bound temperature alarm event. line 1 */
706 IRQ_PG4, IRQF_TRIGGER_LOW,
707 /* CT bound temperature alarm event irq_flags. line 0 */
711 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
716 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
717 static unsigned short ad7298_platform_data[] = {
718 GPIO_PF7, /* busy_pin */
723 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
724 static unsigned long adt7316_spi_data[2] = {
725 IRQF_TRIGGER_LOW, /* interrupt flags */
726 GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
729 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
734 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
735 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
737 static int bfin_mmc_spi_init(struct device *dev,
738 irqreturn_t (*detect_int)(int, void *), void *data)
740 return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
741 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
744 static void bfin_mmc_spi_exit(struct device *dev, void *data)
746 free_irq(MMC_SPI_CARD_DETECT_INT, data);
749 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
750 .init = bfin_mmc_spi_init,
751 .exit = bfin_mmc_spi_exit,
752 .detect_delay = 100, /* msecs */
755 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
761 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
762 #include <linux/spi/ad7877.h>
763 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
765 .vref_delay_usecs = 50, /* internal, no capacitor */
768 .pressure_max = 1000,
770 .stopacq_polarity = 1,
771 .first_conversion_delay = 3,
772 .acquisition_time = 1,
774 .pen_down_acc_interval = 1,
778 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
779 #include <linux/spi/ad7879.h>
780 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
781 .model = 7879, /* Model = AD7879 */
782 .x_plate_ohms = 620, /* 620 Ohm from the touch datasheet */
783 .pressure_max = 10000,
785 .first_conversion_delay = 3, /* wait 512us before do a first conversion */
786 .acquisition_time = 1, /* 4us acquisition time per sample */
787 .median = 2, /* do 8 measurements */
788 .averaging = 1, /* take the average of 4 middle samples */
789 .pen_down_acc_interval = 255, /* 9.4 ms */
790 .gpio_export = 1, /* Export GPIO to gpiolib */
791 .gpio_base = -1, /* Dynamic allocation */
795 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
796 #include <linux/input/adxl34x.h>
797 static const struct adxl34x_platform_data adxl34x_info = {
801 .tap_threshold = 0x31,
802 .tap_duration = 0x10,
805 .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
806 .act_axis_control = 0xFF,
807 .activity_threshold = 5,
808 .inactivity_threshold = 3,
809 .inactivity_time = 4,
810 .free_fall_threshold = 0x7,
811 .free_fall_time = 0x20,
813 .data_range = ADXL_FULL_RES,
816 .ev_code_x = ABS_X, /* EV_REL */
817 .ev_code_y = ABS_Y, /* EV_REL */
818 .ev_code_z = ABS_Z, /* EV_REL */
820 .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
822 /* .ev_code_ff = KEY_F,*/ /* EV_KEY */
823 /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */
824 .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
825 .fifo_mode = ADXL_FIFO_STREAM,
826 .orientation_enable = ADXL_EN_ORIENTATION_3D,
827 .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
828 .divisor_length = ADXL_LP_FILTER_DIVISOR_16,
829 /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
830 .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
834 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
835 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
840 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
841 #include <linux/spi/adf702x.h>
842 #define TXREG 0x0160A470
843 static const u32 adf7021_regs[] = {
862 static struct adf702x_platform_data adf7021_platform_data = {
863 .regs_base = (void *)SPORT1_TCR1,
864 .dma_ch_rx = CH_SPORT1_RX,
865 .dma_ch_tx = CH_SPORT1_TX,
866 .irq_sport_err = IRQ_SPORT1_ERROR,
867 .gpio_int_rfs = GPIO_PF8,
868 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
869 P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
870 .adf702x_model = MODEL_ADF7021,
871 .adf702x_regs = adf7021_regs,
874 static inline void adf702x_mac_init(void)
876 random_ether_addr(adf7021_platform_data.mac_addr);
879 static inline void adf702x_mac_init(void) {}
882 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
883 #include <linux/spi/ads7846.h>
884 static int ads7873_get_pendown_state(void)
886 return gpio_get_value(GPIO_PF6);
889 static struct ads7846_platform_data __initdata ad7873_pdata = {
890 .model = 7873, /* AD7873 */
896 .debounce_tol = (~0),
897 .get_pendown_state = ads7873_get_pendown_state,
901 #if defined(CONFIG_MTD_DATAFLASH) \
902 || defined(CONFIG_MTD_DATAFLASH_MODULE)
904 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
906 .name = "bootloader(spi)",
909 .mask_flags = MTD_CAP_ROM
911 .name = "linux kernel(spi)",
913 .offset = MTDPART_OFS_APPEND,
915 .name = "file system(spi)",
916 .size = MTDPART_SIZ_FULL,
917 .offset = MTDPART_OFS_APPEND,
921 static struct flash_platform_data bfin_spi_dataflash_data = {
922 .name = "SPI Dataflash",
923 .parts = bfin_spi_dataflash_partitions,
924 .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
928 static struct bfin5xx_spi_chip data_flash_chip_info = {
929 .enable_dma = 0, /* use dma transfer with this chip*/
933 #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
934 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
935 .enable_dma = 0, /* use dma transfer with this chip*/
939 static struct spi_board_info bfin_spi_board_info[] __initdata = {
940 #if defined(CONFIG_MTD_M25P80) \
941 || defined(CONFIG_MTD_M25P80_MODULE)
943 /* the modalias must be the same as spi device driver name */
944 .modalias = "m25p80", /* Name of spi_driver for this device */
945 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
946 .bus_num = 0, /* Framework bus number */
947 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
948 .platform_data = &bfin_spi_flash_data,
949 .controller_data = &spi_flash_chip_info,
953 #if defined(CONFIG_MTD_DATAFLASH) \
954 || defined(CONFIG_MTD_DATAFLASH_MODULE)
955 { /* DataFlash chip */
956 .modalias = "mtd_dataflash",
957 .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */
958 .bus_num = 0, /* Framework bus number */
959 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
960 .platform_data = &bfin_spi_dataflash_data,
961 .controller_data = &data_flash_chip_info,
966 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
967 || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
969 .modalias = "ad1836",
970 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
973 .platform_data = "ad1836", /* only includes chip name for the moment */
978 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
980 .modalias = "ad193x",
981 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
988 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
990 .modalias = "adav801",
991 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
998 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
1000 .modalias = "ad714x_captouch",
1001 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1006 .platform_data = &ad7147_spi_platform_data,
1010 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1012 .modalias = "ad2s90",
1014 .chip_select = 3, /* change it for your board */
1016 .platform_data = NULL,
1017 .controller_data = &ad2s90_spi_chip_info,
1021 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1023 .modalias = "ad2s120x",
1025 .chip_select = 4, /* CS, change it for your board */
1026 .platform_data = ad2s120x_platform_data,
1027 .controller_data = &ad2s120x_spi_chip_info,
1031 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1033 .modalias = "ad2s1210",
1034 .max_speed_hz = 8192000,
1036 .chip_select = 4, /* CS, change it for your board */
1037 .platform_data = ad2s1210_platform_data,
1038 .controller_data = &ad2s1210_spi_chip_info,
1042 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
1044 .modalias = "ad7314",
1045 .max_speed_hz = 1000000,
1047 .chip_select = 4, /* CS, change it for your board */
1048 .controller_data = &ad7314_spi_chip_info,
1053 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
1055 .modalias = "ad7818",
1056 .max_speed_hz = 1000000,
1058 .chip_select = 4, /* CS, change it for your board */
1059 .platform_data = ad7816_platform_data,
1060 .controller_data = &ad7816_spi_chip_info,
1065 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
1067 .modalias = "adt7310",
1068 .max_speed_hz = 1000000,
1069 .irq = IRQ_PG5, /* CT alarm event. Line 0 */
1071 .chip_select = 4, /* CS, change it for your board */
1072 .platform_data = adt7310_platform_data,
1073 .controller_data = &adt7310_spi_chip_info,
1078 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
1080 .modalias = "ad7298",
1081 .max_speed_hz = 1000000,
1083 .chip_select = 4, /* CS, change it for your board */
1084 .platform_data = ad7298_platform_data,
1089 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
1091 .modalias = "adt7316",
1092 .max_speed_hz = 1000000,
1093 .irq = IRQ_PG5, /* interrupt line */
1095 .chip_select = 4, /* CS, change it for your board */
1096 .platform_data = adt7316_spi_data,
1097 .controller_data = &adt7316_spi_chip_info,
1102 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1104 .modalias = "mmc_spi",
1105 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1108 .platform_data = &bfin_mmc_spi_pdata,
1109 .controller_data = &mmc_spi_chip_info,
1113 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1115 .modalias = "ad7877",
1116 .platform_data = &bfin_ad7877_ts_info,
1118 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
1123 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1125 .modalias = "ad7879",
1126 .platform_data = &bfin_ad7879_ts_info,
1128 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1131 .mode = SPI_CPHA | SPI_CPOL,
1134 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1136 .modalias = "spidev",
1137 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
1142 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1144 .modalias = "bfin-lq035q1-spi",
1145 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1148 .mode = SPI_CPHA | SPI_CPOL,
1151 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1153 .modalias = "enc28j60",
1154 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
1157 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1158 .controller_data = &enc28j60_spi_chip_info,
1162 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1164 .modalias = "adxl34x",
1165 .platform_data = &adxl34x_info,
1167 .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
1173 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1175 .modalias = "adf702x",
1176 .max_speed_hz = 16000000, /* max spi clock (SCK) speed in HZ */
1178 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1179 .platform_data = &adf7021_platform_data,
1183 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1185 .modalias = "ads7846",
1186 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1189 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1190 .platform_data = &ad7873_pdata,
1194 #if defined(CONFIG_AD7476) \
1195 || defined(CONFIG_AD7476_MODULE)
1197 .modalias = "ad7476", /* Name of spi_driver for this device */
1198 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
1199 .bus_num = 0, /* Framework bus number */
1200 .chip_select = 1, /* Framework chip select. */
1201 .platform_data = NULL, /* No spi_driver specific config */
1202 .controller_data = &spi_ad7476_chip_info,
1206 #if defined(CONFIG_ADE7753) \
1207 || defined(CONFIG_ADE7753_MODULE)
1209 .modalias = "ade7753",
1210 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1212 .chip_select = 1, /* CS, change it for your board */
1213 .platform_data = NULL, /* No spi_driver specific config */
1217 #if defined(CONFIG_ADE7754) \
1218 || defined(CONFIG_ADE7754_MODULE)
1220 .modalias = "ade7754",
1221 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1223 .chip_select = 1, /* CS, change it for your board */
1224 .platform_data = NULL, /* No spi_driver specific config */
1228 #if defined(CONFIG_ADE7758) \
1229 || defined(CONFIG_ADE7758_MODULE)
1231 .modalias = "ade7758",
1232 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1234 .chip_select = 1, /* CS, change it for your board */
1235 .platform_data = NULL, /* No spi_driver specific config */
1239 #if defined(CONFIG_ADE7759) \
1240 || defined(CONFIG_ADE7759_MODULE)
1242 .modalias = "ade7759",
1243 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1245 .chip_select = 1, /* CS, change it for your board */
1246 .platform_data = NULL, /* No spi_driver specific config */
1250 #if defined(CONFIG_ADE7854_SPI) \
1251 || defined(CONFIG_ADE7854_SPI_MODULE)
1253 .modalias = "ade7854",
1254 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1256 .chip_select = 1, /* CS, change it for your board */
1257 .platform_data = NULL, /* No spi_driver specific config */
1261 #if defined(CONFIG_ADIS16060) \
1262 || defined(CONFIG_ADIS16060_MODULE)
1264 .modalias = "adis16060_r",
1265 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1267 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1268 .platform_data = NULL, /* No spi_driver specific config */
1272 .modalias = "adis16060_w",
1273 .max_speed_hz = 2900000, /* max spi clock (SCK) speed in HZ */
1275 .chip_select = 2, /* CS for write, change it for your board */
1276 .platform_data = NULL, /* No spi_driver specific config */
1280 #if defined(CONFIG_ADIS16130) \
1281 || defined(CONFIG_ADIS16130_MODULE)
1283 .modalias = "adis16130",
1284 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1286 .chip_select = 1, /* CS for read, change it for your board */
1287 .platform_data = NULL, /* No spi_driver specific config */
1291 #if defined(CONFIG_ADIS16201) \
1292 || defined(CONFIG_ADIS16201_MODULE)
1294 .modalias = "adis16201",
1295 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1297 .chip_select = 5, /* CS, change it for your board */
1298 .platform_data = NULL, /* No spi_driver specific config */
1303 #if defined(CONFIG_ADIS16203) \
1304 || defined(CONFIG_ADIS16203_MODULE)
1306 .modalias = "adis16203",
1307 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1309 .chip_select = 5, /* CS, change it for your board */
1310 .platform_data = NULL, /* No spi_driver specific config */
1315 #if defined(CONFIG_ADIS16204) \
1316 || defined(CONFIG_ADIS16204_MODULE)
1318 .modalias = "adis16204",
1319 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1321 .chip_select = 5, /* CS, change it for your board */
1322 .platform_data = NULL, /* No spi_driver specific config */
1327 #if defined(CONFIG_ADIS16209) \
1328 || defined(CONFIG_ADIS16209_MODULE)
1330 .modalias = "adis16209",
1331 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1333 .chip_select = 5, /* CS, change it for your board */
1334 .platform_data = NULL, /* No spi_driver specific config */
1339 #if defined(CONFIG_ADIS16220) \
1340 || defined(CONFIG_ADIS16220_MODULE)
1342 .modalias = "adis16220",
1343 .max_speed_hz = 2000000, /* max spi clock (SCK) speed in HZ */
1345 .chip_select = 5, /* CS, change it for your board */
1346 .platform_data = NULL, /* No spi_driver specific config */
1351 #if defined(CONFIG_ADIS16240) \
1352 || defined(CONFIG_ADIS16240_MODULE)
1354 .modalias = "adis16240",
1355 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1357 .chip_select = 5, /* CS, change it for your board */
1358 .platform_data = NULL, /* No spi_driver specific config */
1363 #if defined(CONFIG_ADIS16260) \
1364 || defined(CONFIG_ADIS16260_MODULE)
1366 .modalias = "adis16260",
1367 .max_speed_hz = 1500000, /* max spi clock (SCK) speed in HZ */
1369 .chip_select = 5, /* CS, change it for your board */
1370 .platform_data = NULL, /* No spi_driver specific config */
1375 #if defined(CONFIG_ADIS16261) \
1376 || defined(CONFIG_ADIS16261_MODULE)
1378 .modalias = "adis16261",
1379 .max_speed_hz = 2500000, /* max spi clock (SCK) speed in HZ */
1381 .chip_select = 1, /* CS, change it for your board */
1382 .platform_data = NULL, /* No spi_driver specific config */
1386 #if defined(CONFIG_ADIS16300) \
1387 || defined(CONFIG_ADIS16300_MODULE)
1389 .modalias = "adis16300",
1390 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1392 .chip_select = 5, /* CS, change it for your board */
1393 .platform_data = NULL, /* No spi_driver specific config */
1398 #if defined(CONFIG_ADIS16350) \
1399 || defined(CONFIG_ADIS16350_MODULE)
1401 .modalias = "adis16364",
1402 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1404 .chip_select = 5, /* CS, change it for your board */
1405 .platform_data = NULL, /* No spi_driver specific config */
1410 #if defined(CONFIG_ADIS16400) \
1411 || defined(CONFIG_ADIS16400_MODULE)
1413 .modalias = "adis16400",
1414 .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */
1416 .chip_select = 1, /* CS, change it for your board */
1417 .platform_data = NULL, /* No spi_driver specific config */
1423 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1424 /* SPI controller data */
1425 static struct bfin5xx_spi_master bfin_spi0_info = {
1426 .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1427 .enable_dma = 1, /* master has the ability to do dma transfer */
1428 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1432 static struct resource bfin_spi0_resource[] = {
1434 .start = SPI0_REGBASE,
1435 .end = SPI0_REGBASE + 0xFF,
1436 .flags = IORESOURCE_MEM,
1441 .flags = IORESOURCE_DMA,
1446 .flags = IORESOURCE_IRQ,
1450 static struct platform_device bfin_spi0_device = {
1452 .id = 0, /* Bus number */
1453 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1454 .resource = bfin_spi0_resource,
1456 .platform_data = &bfin_spi0_info, /* Passed to driver */
1459 #endif /* spi master and devices */
1461 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1463 /* SPORT SPI controller data */
1464 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1465 .num_chipselect = 1, /* master only supports one device */
1466 .enable_dma = 0, /* master don't support DMA */
1467 .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1468 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1471 static struct resource bfin_sport_spi0_resource[] = {
1473 .start = SPORT0_TCR1,
1474 .end = SPORT0_TCR1 + 0xFF,
1475 .flags = IORESOURCE_MEM,
1478 .start = IRQ_SPORT0_ERROR,
1479 .end = IRQ_SPORT0_ERROR,
1480 .flags = IORESOURCE_IRQ,
1484 static struct platform_device bfin_sport_spi0_device = {
1485 .name = "bfin-sport-spi",
1486 .id = 1, /* Bus number */
1487 .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1488 .resource = bfin_sport_spi0_resource,
1490 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1494 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1495 .num_chipselect = 1, /* master only supports one device */
1496 .enable_dma = 0, /* master don't support DMA */
1497 .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1498 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1501 static struct resource bfin_sport_spi1_resource[] = {
1503 .start = SPORT1_TCR1,
1504 .end = SPORT1_TCR1 + 0xFF,
1505 .flags = IORESOURCE_MEM,
1508 .start = IRQ_SPORT1_ERROR,
1509 .end = IRQ_SPORT1_ERROR,
1510 .flags = IORESOURCE_IRQ,
1514 static struct platform_device bfin_sport_spi1_device = {
1515 .name = "bfin-sport-spi",
1516 .id = 2, /* Bus number */
1517 .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1518 .resource = bfin_sport_spi1_resource,
1520 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1524 #endif /* sport spi master and devices */
1526 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1527 static struct platform_device bfin_fb_device = {
1528 .name = "bf537-lq035",
1532 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1533 #include <asm/bfin-lq035q1.h>
1535 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1536 .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1537 .ppi_mode = USE_RGB565_16_BIT_PPI,
1538 .use_bl = 0, /* let something else control the LCD Blacklight */
1539 .gpio_bl = GPIO_PF7,
1542 static struct resource bfin_lq035q1_resources[] = {
1544 .start = IRQ_PPI_ERROR,
1545 .end = IRQ_PPI_ERROR,
1546 .flags = IORESOURCE_IRQ,
1550 static struct platform_device bfin_lq035q1_device = {
1551 .name = "bfin-lq035q1",
1553 .num_resources = ARRAY_SIZE(bfin_lq035q1_resources),
1554 .resource = bfin_lq035q1_resources,
1556 .platform_data = &bfin_lq035q1_data,
1561 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1562 #ifdef CONFIG_SERIAL_BFIN_UART0
1563 static struct resource bfin_uart0_resources[] = {
1566 .end = UART0_GCTL+2,
1567 .flags = IORESOURCE_MEM,
1570 .start = IRQ_UART0_TX,
1571 .end = IRQ_UART0_TX,
1572 .flags = IORESOURCE_IRQ,
1575 .start = IRQ_UART0_RX,
1576 .end = IRQ_UART0_RX,
1577 .flags = IORESOURCE_IRQ,
1580 .start = IRQ_UART0_ERROR,
1581 .end = IRQ_UART0_ERROR,
1582 .flags = IORESOURCE_IRQ,
1585 .start = CH_UART0_TX,
1587 .flags = IORESOURCE_DMA,
1590 .start = CH_UART0_RX,
1592 .flags = IORESOURCE_DMA,
1594 #ifdef CONFIG_BFIN_UART0_CTSRTS
1598 .flags = IORESOURCE_IO,
1603 .flags = IORESOURCE_IO,
1608 static unsigned short bfin_uart0_peripherals[] = {
1609 P_UART0_TX, P_UART0_RX, 0
1612 static struct platform_device bfin_uart0_device = {
1613 .name = "bfin-uart",
1615 .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1616 .resource = bfin_uart0_resources,
1618 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1622 #ifdef CONFIG_SERIAL_BFIN_UART1
1623 static struct resource bfin_uart1_resources[] = {
1626 .end = UART1_GCTL+2,
1627 .flags = IORESOURCE_MEM,
1630 .start = IRQ_UART1_TX,
1631 .end = IRQ_UART1_TX,
1632 .flags = IORESOURCE_IRQ,
1635 .start = IRQ_UART1_RX,
1636 .end = IRQ_UART1_RX,
1637 .flags = IORESOURCE_IRQ,
1640 .start = IRQ_UART1_ERROR,
1641 .end = IRQ_UART1_ERROR,
1642 .flags = IORESOURCE_IRQ,
1645 .start = CH_UART1_TX,
1647 .flags = IORESOURCE_DMA,
1650 .start = CH_UART1_RX,
1652 .flags = IORESOURCE_DMA,
1656 static unsigned short bfin_uart1_peripherals[] = {
1657 P_UART1_TX, P_UART1_RX, 0
1660 static struct platform_device bfin_uart1_device = {
1661 .name = "bfin-uart",
1663 .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1664 .resource = bfin_uart1_resources,
1666 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1672 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1673 #ifdef CONFIG_BFIN_SIR0
1674 static struct resource bfin_sir0_resources[] = {
1676 .start = 0xFFC00400,
1678 .flags = IORESOURCE_MEM,
1681 .start = IRQ_UART0_RX,
1682 .end = IRQ_UART0_RX+1,
1683 .flags = IORESOURCE_IRQ,
1686 .start = CH_UART0_RX,
1687 .end = CH_UART0_RX+1,
1688 .flags = IORESOURCE_DMA,
1692 static struct platform_device bfin_sir0_device = {
1695 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1696 .resource = bfin_sir0_resources,
1699 #ifdef CONFIG_BFIN_SIR1
1700 static struct resource bfin_sir1_resources[] = {
1702 .start = 0xFFC02000,
1704 .flags = IORESOURCE_MEM,
1707 .start = IRQ_UART1_RX,
1708 .end = IRQ_UART1_RX+1,
1709 .flags = IORESOURCE_IRQ,
1712 .start = CH_UART1_RX,
1713 .end = CH_UART1_RX+1,
1714 .flags = IORESOURCE_DMA,
1718 static struct platform_device bfin_sir1_device = {
1721 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1722 .resource = bfin_sir1_resources,
1727 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1728 static struct resource bfin_twi0_resource[] = {
1730 .start = TWI0_REGBASE,
1731 .end = TWI0_REGBASE,
1732 .flags = IORESOURCE_MEM,
1737 .flags = IORESOURCE_IRQ,
1741 static struct platform_device i2c_bfin_twi_device = {
1742 .name = "i2c-bfin-twi",
1744 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1745 .resource = bfin_twi0_resource,
1749 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1750 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1764 [13] = KEY_BACKSLASH,
1776 [26] = KEY_LEFTBRACE,
1777 [27] = KEY_RIGHTBRACE,
1790 [41] = KEY_SEMICOLON,
1791 [42] = KEY_APOSTROPHE,
1792 [43] = KEY_BACKSLASH,
1812 [65] = KEY_BACKSPACE,
1825 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1828 .keymap = adp5588_keymap,
1829 .keymapsize = ARRAY_SIZE(adp5588_keymap),
1834 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1835 #include <linux/mfd/adp5520.h>
1838 * ADP5520/5501 Backlight Data
1841 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1842 .fade_in = ADP5520_FADE_T_1200ms,
1843 .fade_out = ADP5520_FADE_T_1200ms,
1844 .fade_led_law = ADP5520_BL_LAW_LINEAR,
1846 .abml_filt = ADP5520_BL_AMBL_FILT_640ms,
1847 .l1_daylight_max = ADP5520_BL_CUR_mA(15),
1848 .l1_daylight_dim = ADP5520_BL_CUR_mA(0),
1849 .l2_office_max = ADP5520_BL_CUR_mA(7),
1850 .l2_office_dim = ADP5520_BL_CUR_mA(0),
1851 .l3_dark_max = ADP5520_BL_CUR_mA(3),
1852 .l3_dark_dim = ADP5520_BL_CUR_mA(0),
1853 .l2_trip = ADP5520_L2_COMP_CURR_uA(700),
1854 .l2_hyst = ADP5520_L2_COMP_CURR_uA(50),
1855 .l3_trip = ADP5520_L3_COMP_CURR_uA(80),
1856 .l3_hyst = ADP5520_L3_COMP_CURR_uA(20),
1860 * ADP5520/5501 LEDs Data
1863 static struct led_info adp5520_leds[] = {
1865 .name = "adp5520-led1",
1866 .default_trigger = "none",
1867 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1869 #ifdef ADP5520_EN_ALL_LEDS
1871 .name = "adp5520-led2",
1872 .default_trigger = "none",
1873 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1876 .name = "adp5520-led3",
1877 .default_trigger = "none",
1878 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1883 static struct adp5520_leds_platform_data adp5520_leds_data = {
1884 .num_leds = ARRAY_SIZE(adp5520_leds),
1885 .leds = adp5520_leds,
1886 .fade_in = ADP5520_FADE_T_600ms,
1887 .fade_out = ADP5520_FADE_T_600ms,
1888 .led_on_time = ADP5520_LED_ONT_600ms,
1895 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1897 .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1898 .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1902 * ADP5520 Keypad Data
1905 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1906 [ADP5520_KEY(0, 0)] = KEY_GRAVE,
1907 [ADP5520_KEY(0, 1)] = KEY_1,
1908 [ADP5520_KEY(0, 2)] = KEY_2,
1909 [ADP5520_KEY(0, 3)] = KEY_3,
1910 [ADP5520_KEY(1, 0)] = KEY_4,
1911 [ADP5520_KEY(1, 1)] = KEY_5,
1912 [ADP5520_KEY(1, 2)] = KEY_6,
1913 [ADP5520_KEY(1, 3)] = KEY_7,
1914 [ADP5520_KEY(2, 0)] = KEY_8,
1915 [ADP5520_KEY(2, 1)] = KEY_9,
1916 [ADP5520_KEY(2, 2)] = KEY_0,
1917 [ADP5520_KEY(2, 3)] = KEY_MINUS,
1918 [ADP5520_KEY(3, 0)] = KEY_EQUAL,
1919 [ADP5520_KEY(3, 1)] = KEY_BACKSLASH,
1920 [ADP5520_KEY(3, 2)] = KEY_BACKSPACE,
1921 [ADP5520_KEY(3, 3)] = KEY_ENTER,
1924 static struct adp5520_keys_platform_data adp5520_keys_data = {
1925 .rows_en_mask = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1926 .cols_en_mask = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1927 .keymap = adp5520_keymap,
1928 .keymapsize = ARRAY_SIZE(adp5520_keymap),
1933 * ADP5520/5501 Multifunction Device Init Data
1936 static struct adp5520_platform_data adp5520_pdev_data = {
1937 .backlight = &adp5520_backlight_data,
1938 .leds = &adp5520_leds_data,
1939 .gpio = &adp5520_gpio_data,
1940 .keys = &adp5520_keys_data,
1945 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1946 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
1948 .pullup_dis_mask = 0,
1952 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
1953 #include <linux/i2c/adp8870.h>
1954 static struct led_info adp8870_leds[] = {
1956 .name = "adp8870-led7",
1957 .default_trigger = "none",
1958 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
1963 static struct adp8870_backlight_platform_data adp8870_pdata = {
1964 .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
1965 ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
1966 .pwm_assign = 0, /* 1 = Enables PWM mode */
1968 .bl_fade_in = ADP8870_FADE_T_1200ms, /* Backlight Fade-In Timer */
1969 .bl_fade_out = ADP8870_FADE_T_1200ms, /* Backlight Fade-Out Timer */
1970 .bl_fade_law = ADP8870_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
1972 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
1973 .abml_filt = ADP8870_BL_AMBL_FILT_320ms, /* Light sensor filter time */
1975 .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1976 .l1_daylight_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1977 .l2_bright_max = ADP8870_BL_CUR_mA(14), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1978 .l2_bright_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1979 .l3_office_max = ADP8870_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1980 .l3_office_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1981 .l4_indoor_max = ADP8870_BL_CUR_mA(3), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1982 .l4_indor_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1983 .l5_dark_max = ADP8870_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1984 .l5_dark_dim = ADP8870_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1986 .l2_trip = ADP8870_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1987 .l2_hyst = ADP8870_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1988 .l3_trip = ADP8870_L3_COMP_CURR_uA(389), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1989 .l3_hyst = ADP8870_L3_COMP_CURR_uA(54), /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1990 .l4_trip = ADP8870_L4_COMP_CURR_uA(167), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1991 .l4_hyst = ADP8870_L4_COMP_CURR_uA(16), /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1992 .l5_trip = ADP8870_L5_COMP_CURR_uA(43), /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1993 .l5_hyst = ADP8870_L5_COMP_CURR_uA(11), /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1995 .leds = adp8870_leds,
1996 .num_leds = ARRAY_SIZE(adp8870_leds),
1997 .led_fade_law = ADP8870_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
1998 .led_fade_in = ADP8870_FADE_T_600ms,
1999 .led_fade_out = ADP8870_FADE_T_600ms,
2000 .led_on_time = ADP8870_LED_ONT_200ms,
2004 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2005 #include <linux/i2c/adp8860.h>
2006 static struct led_info adp8860_leds[] = {
2008 .name = "adp8860-led7",
2009 .default_trigger = "none",
2010 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2014 static struct adp8860_backlight_platform_data adp8860_pdata = {
2015 .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2016 ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2018 .bl_fade_in = ADP8860_FADE_T_1200ms, /* Backlight Fade-In Timer */
2019 .bl_fade_out = ADP8860_FADE_T_1200ms, /* Backlight Fade-Out Timer */
2020 .bl_fade_law = ADP8860_FADE_LAW_CUBIC1, /* fade-on/fade-off transfer characteristic */
2022 .en_ambl_sens = 1, /* 1 = enable ambient light sensor */
2023 .abml_filt = ADP8860_BL_AMBL_FILT_320ms, /* Light sensor filter time */
2025 .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2026 .l1_daylight_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2027 .l2_office_max = ADP8860_BL_CUR_mA(6), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2028 .l2_office_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2029 .l3_dark_max = ADP8860_BL_CUR_mA(2), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2030 .l3_dark_dim = ADP8860_BL_CUR_mA(0), /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2032 .l2_trip = ADP8860_L2_COMP_CURR_uA(710), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2033 .l2_hyst = ADP8860_L2_COMP_CURR_uA(73), /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2034 .l3_trip = ADP8860_L3_COMP_CURR_uA(43), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2035 .l3_hyst = ADP8860_L3_COMP_CURR_uA(11), /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2037 .leds = adp8860_leds,
2038 .num_leds = ARRAY_SIZE(adp8860_leds),
2039 .led_fade_law = ADP8860_FADE_LAW_SQUARE, /* fade-on/fade-off transfer characteristic */
2040 .led_fade_in = ADP8860_FADE_T_600ms,
2041 .led_fade_out = ADP8860_FADE_T_600ms,
2042 .led_on_time = ADP8860_LED_ONT_200ms,
2046 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2047 static struct regulator_consumer_supply ad5398_consumer = {
2048 .supply = "current",
2051 static struct regulator_init_data ad5398_regulator_data = {
2053 .name = "current range",
2055 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2057 .num_consumer_supplies = 1,
2058 .consumer_supplies = &ad5398_consumer,
2061 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2062 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2063 static struct platform_device ad5398_virt_consumer_device = {
2064 .name = "reg-virt-consumer",
2067 .platform_data = "current", /* Passed to driver */
2071 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2072 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2073 static struct regulator_bulk_data ad5398_bulk_data = {
2074 .supply = "current",
2077 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2080 .supplies = &ad5398_bulk_data,
2083 static struct platform_device ad5398_userspace_consumer_device = {
2084 .name = "reg-userspace-consumer",
2087 .platform_data = &ad5398_userspace_comsumer_data,
2093 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2094 /* INT bound temperature alarm event. line 1 */
2095 static unsigned long adt7410_platform_data[2] = {
2096 IRQ_PG4, IRQF_TRIGGER_LOW,
2100 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2101 /* INT bound temperature alarm event. line 1 */
2102 static unsigned long adt7316_i2c_data[2] = {
2103 IRQF_TRIGGER_LOW, /* interrupt flags */
2104 GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2108 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2109 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
2111 I2C_BOARD_INFO("ad1937", 0x04),
2115 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
2117 I2C_BOARD_INFO("adav803", 0x10),
2121 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
2123 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2125 .platform_data = (void *)&ad7142_i2c_platform_data,
2129 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
2131 I2C_BOARD_INFO("ad7150", 0x48),
2132 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2136 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
2138 I2C_BOARD_INFO("ad7152", 0x48),
2142 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
2144 I2C_BOARD_INFO("ad774x", 0x48),
2148 #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
2150 I2C_BOARD_INFO("ade7854", 0x38),
2154 #if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
2156 I2C_BOARD_INFO("adt75", 0x9),
2161 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2163 I2C_BOARD_INFO("adt7410", 0x48),
2164 /* CT critical temperature event. line 0 */
2166 .platform_data = (void *)&adt7410_platform_data,
2170 #if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
2172 I2C_BOARD_INFO("ad7291", 0x20),
2177 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2179 I2C_BOARD_INFO("adt7316", 0x48),
2181 .platform_data = (void *)&adt7316_i2c_data,
2185 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2187 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2190 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
2192 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2196 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
2198 I2C_BOARD_INFO("ad7879", 0x2F),
2200 .platform_data = (void *)&bfin_ad7879_ts_info,
2203 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
2205 I2C_BOARD_INFO("adp5588-keys", 0x34),
2207 .platform_data = (void *)&adp5588_kpad_data,
2210 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
2212 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2214 .platform_data = (void *)&adp5520_pdev_data,
2217 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
2219 I2C_BOARD_INFO("adxl34x", 0x53),
2221 .platform_data = (void *)&adxl34x_info,
2224 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2226 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2227 .platform_data = (void *)&adp5588_gpio_data,
2230 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
2232 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2235 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2237 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2240 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2242 I2C_BOARD_INFO("adp8870", 0x2B),
2243 .platform_data = (void *)&adp8870_pdata,
2246 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
2248 I2C_BOARD_INFO("adau1371", 0x1A),
2251 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
2253 I2C_BOARD_INFO("adau1761", 0x38),
2256 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
2258 I2C_BOARD_INFO("adau1361", 0x38),
2261 #if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
2263 I2C_BOARD_INFO("adau1701", 0x34),
2266 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
2268 I2C_BOARD_INFO("ad5258", 0x18),
2271 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
2273 I2C_BOARD_INFO("ssm2602", 0x1b),
2276 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2278 I2C_BOARD_INFO("ad5398", 0xC),
2279 .platform_data = (void *)&ad5398_regulator_data,
2282 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2284 I2C_BOARD_INFO("adp8860", 0x2A),
2285 .platform_data = (void *)&adp8860_pdata,
2288 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
2290 I2C_BOARD_INFO("adau1373", 0x1A),
2293 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2295 I2C_BOARD_INFO("ad5252", 0x2e),
2300 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2301 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2302 static struct resource bfin_sport0_uart_resources[] = {
2304 .start = SPORT0_TCR1,
2305 .end = SPORT0_MRCS3+4,
2306 .flags = IORESOURCE_MEM,
2309 .start = IRQ_SPORT0_RX,
2310 .end = IRQ_SPORT0_RX+1,
2311 .flags = IORESOURCE_IRQ,
2314 .start = IRQ_SPORT0_ERROR,
2315 .end = IRQ_SPORT0_ERROR,
2316 .flags = IORESOURCE_IRQ,
2320 static unsigned short bfin_sport0_peripherals[] = {
2321 P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2322 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
2325 static struct platform_device bfin_sport0_uart_device = {
2326 .name = "bfin-sport-uart",
2328 .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2329 .resource = bfin_sport0_uart_resources,
2331 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2335 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2336 static struct resource bfin_sport1_uart_resources[] = {
2338 .start = SPORT1_TCR1,
2339 .end = SPORT1_MRCS3+4,
2340 .flags = IORESOURCE_MEM,
2343 .start = IRQ_SPORT1_RX,
2344 .end = IRQ_SPORT1_RX+1,
2345 .flags = IORESOURCE_IRQ,
2348 .start = IRQ_SPORT1_ERROR,
2349 .end = IRQ_SPORT1_ERROR,
2350 .flags = IORESOURCE_IRQ,
2354 static unsigned short bfin_sport1_peripherals[] = {
2355 P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2356 P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2359 static struct platform_device bfin_sport1_uart_device = {
2360 .name = "bfin-sport-uart",
2362 .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2363 .resource = bfin_sport1_uart_resources,
2365 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2371 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2372 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2373 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2375 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2376 #define PATA_INT IRQ_PF5
2377 static struct pata_platform_info bfin_pata_platform_data = {
2379 .irq_flags = IRQF_TRIGGER_HIGH,
2382 static struct resource bfin_pata_resources[] = {
2384 .start = 0x20314020,
2386 .flags = IORESOURCE_MEM,
2389 .start = 0x2031401C,
2391 .flags = IORESOURCE_MEM,
2396 .flags = IORESOURCE_IRQ,
2399 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2400 static struct pata_platform_info bfin_pata_platform_data = {
2403 /* CompactFlash Storage Card Memory Mapped Addressing
2406 static struct resource bfin_pata_resources[] = {
2408 .start = 0x20211800,
2410 .flags = IORESOURCE_MEM,
2413 .start = 0x2021180E, /* Device Ctl */
2415 .flags = IORESOURCE_MEM,
2420 static struct platform_device bfin_pata_device = {
2421 .name = "pata_platform",
2423 .num_resources = ARRAY_SIZE(bfin_pata_resources),
2424 .resource = bfin_pata_resources,
2426 .platform_data = &bfin_pata_platform_data,
2431 static const unsigned int cclk_vlev_datasheet[] =
2433 VRPAIR(VLEV_085, 250000000),
2434 VRPAIR(VLEV_090, 376000000),
2435 VRPAIR(VLEV_095, 426000000),
2436 VRPAIR(VLEV_100, 426000000),
2437 VRPAIR(VLEV_105, 476000000),
2438 VRPAIR(VLEV_110, 476000000),
2439 VRPAIR(VLEV_115, 476000000),
2440 VRPAIR(VLEV_120, 500000000),
2441 VRPAIR(VLEV_125, 533000000),
2442 VRPAIR(VLEV_130, 600000000),
2445 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2446 .tuple_tab = cclk_vlev_datasheet,
2447 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2448 .vr_settling_time = 25 /* us */,
2451 static struct platform_device bfin_dpmc = {
2452 .name = "bfin dpmc",
2454 .platform_data = &bfin_dmpc_vreg_data,
2458 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
2459 defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
2460 defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2462 #define SPORT_REQ(x) \
2463 [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2464 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2466 static const u16 bfin_snd_pin[][7] = {
2471 static struct bfin_snd_platform_data bfin_snd_data[] = {
2473 .pin_req = &bfin_snd_pin[0][0],
2476 .pin_req = &bfin_snd_pin[1][0],
2480 #define BFIN_SND_RES(x) \
2483 .start = SPORT##x##_TCR1, \
2484 .end = SPORT##x##_TCR1, \
2485 .flags = IORESOURCE_MEM \
2488 .start = CH_SPORT##x##_RX, \
2489 .end = CH_SPORT##x##_RX, \
2490 .flags = IORESOURCE_DMA, \
2493 .start = CH_SPORT##x##_TX, \
2494 .end = CH_SPORT##x##_TX, \
2495 .flags = IORESOURCE_DMA, \
2498 .start = IRQ_SPORT##x##_ERROR, \
2499 .end = IRQ_SPORT##x##_ERROR, \
2500 .flags = IORESOURCE_IRQ, \
2504 static struct resource bfin_snd_resources[][4] = {
2510 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2511 static struct platform_device bfin_i2s_pcm = {
2512 .name = "bfin-i2s-pcm-audio",
2517 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2518 static struct platform_device bfin_tdm_pcm = {
2519 .name = "bfin-tdm-pcm-audio",
2524 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2525 static struct platform_device bfin_ac97_pcm = {
2526 .name = "bfin-ac97-pcm-audio",
2531 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2532 static struct platform_device bfin_ad73311_codec_device = {
2538 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2539 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2540 static struct platform_device bfin_eval_adav801_device = {
2541 .name = "bfin-eval-adav801",
2546 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2547 static struct platform_device bfin_i2s = {
2549 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2550 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2551 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2553 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2558 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2559 static struct platform_device bfin_tdm = {
2561 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2562 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2563 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2565 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2570 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2571 static struct platform_device bfin_ac97 = {
2572 .name = "bfin-ac97",
2573 .id = CONFIG_SND_BF5XX_SPORT_NUM,
2574 .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2575 .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2577 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2582 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2583 #define REGULATOR_ADP122 "adp122"
2584 #define REGULATOR_ADP122_UV 2500000
2586 static struct regulator_consumer_supply adp122_consumers = {
2587 .supply = REGULATOR_ADP122,
2590 static struct regulator_init_data adp_switch_regulator_data = {
2592 .name = REGULATOR_ADP122,
2593 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2594 .min_uV = REGULATOR_ADP122_UV,
2595 .max_uV = REGULATOR_ADP122_UV,
2599 .num_consumer_supplies = 1, /* only 1 */
2600 .consumer_supplies = &adp122_consumers,
2603 static struct fixed_voltage_config adp_switch_pdata = {
2604 .supply_name = REGULATOR_ADP122,
2605 .microvolts = REGULATOR_ADP122_UV,
2608 .enabled_at_boot = 0,
2609 .init_data = &adp_switch_regulator_data,
2612 static struct platform_device adp_switch_device = {
2613 .name = "reg-fixed-voltage",
2616 .platform_data = &adp_switch_pdata,
2620 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2621 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2622 static struct regulator_bulk_data adp122_bulk_data = {
2623 .supply = REGULATOR_ADP122,
2626 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2627 .name = REGULATOR_ADP122,
2629 .supplies = &adp122_bulk_data,
2632 static struct platform_device adp122_userspace_consumer_device = {
2633 .name = "reg-userspace-consumer",
2636 .platform_data = &adp122_userspace_comsumer_data,
2642 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2643 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2645 static struct resource iio_gpio_trigger_resources[] = {
2649 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2653 static struct platform_device iio_gpio_trigger = {
2654 .name = "iio_gpio_trigger",
2655 .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2656 .resource = iio_gpio_trigger_resources,
2660 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2661 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2662 static struct platform_device bf5xx_adau1373_device = {
2663 .name = "bfin-eval-adau1373",
2667 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2668 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2669 static struct platform_device bf5xx_adau1701_device = {
2670 .name = "bfin-eval-adau1701",
2674 static struct platform_device *stamp_devices[] __initdata = {
2678 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2679 &bfin_pcmcia_cf_device,
2682 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2686 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2690 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2691 &isp1362_hcd_device,
2694 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2695 &bfin_isp1760_device,
2698 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2702 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2706 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2710 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2715 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2716 &net2272_bfin_device,
2719 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
2723 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2724 &bfin_sport_spi0_device,
2725 &bfin_sport_spi1_device,
2728 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2732 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2733 &bfin_lq035q1_device,
2736 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2737 #ifdef CONFIG_SERIAL_BFIN_UART0
2740 #ifdef CONFIG_SERIAL_BFIN_UART1
2745 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2746 #ifdef CONFIG_BFIN_SIR0
2749 #ifdef CONFIG_BFIN_SIR1
2754 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2755 &i2c_bfin_twi_device,
2758 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2759 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2760 &bfin_sport0_uart_device,
2762 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2763 &bfin_sport1_uart_device,
2767 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2771 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2772 &bfin_device_gpiokeys,
2775 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2776 &bfin_async_nand_device,
2779 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2780 &stamp_flash_device,
2783 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2787 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2791 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2795 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2796 &bfin_ad73311_codec_device,
2799 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2803 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2807 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2811 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2812 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2813 defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2814 &ad5398_virt_consumer_device,
2816 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2817 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2818 &ad5398_userspace_consumer_device,
2822 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2824 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2825 defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2826 &adp122_userspace_consumer_device,
2830 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2831 defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2835 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2836 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2837 &bf5xx_adau1373_device,
2840 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2841 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2842 &bf5xx_adau1701_device,
2845 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2846 defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2847 &bfin_eval_adav801_device,
2851 static int __init net2272_init(void)
2853 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2856 ret = gpio_request(GPIO_PF6, "net2272");
2860 /* Reset the USB chip */
2861 gpio_direction_output(GPIO_PF6, 0);
2863 gpio_set_value(GPIO_PF6, 1);
2869 static int __init stamp_init(void)
2871 printk(KERN_INFO "%s(): registering device resources\n", __func__);
2872 bfin_plat_nand_init();
2874 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2875 i2c_register_board_info(0, bfin_i2c_board_info,
2876 ARRAY_SIZE(bfin_i2c_board_info));
2877 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2880 pr_warning("unable to configure net2272; it probably won't work\n");
2885 arch_initcall(stamp_init);
2888 static struct platform_device *stamp_early_devices[] __initdata = {
2889 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2890 #ifdef CONFIG_SERIAL_BFIN_UART0
2893 #ifdef CONFIG_SERIAL_BFIN_UART1
2898 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2899 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2900 &bfin_sport0_uart_device,
2902 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2903 &bfin_sport1_uart_device,
2908 void __init native_machine_early_platform_add_devices(void)
2910 printk(KERN_INFO "register early platform devices\n");
2911 early_platform_add_devices(stamp_early_devices,
2912 ARRAY_SIZE(stamp_early_devices));
2915 void native_machine_restart(char *cmd)
2917 /* workaround reboot hang when booting from SPI */
2918 if ((bfin_read_SYSCR() & 0x7) == 0x3)
2919 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
2923 * Currently the MAC address is saved in Flash by U-Boot
2925 #define FLASH_MAC 0x203f0000
2926 void bfin_get_ether_addr(char *addr)
2928 *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
2929 *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
2931 EXPORT_SYMBOL(bfin_get_ether_addr);