]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/ia64/kernel/signal.c
iommu/amd: Fix pci_request_acs() call-place
[karo-tx-linux.git] / arch / ia64 / kernel / signal.c
1 /*
2  * Architecture-specific signal handling support.
3  *
4  * Copyright (C) 1999-2004 Hewlett-Packard Co
5  *      David Mosberger-Tang <davidm@hpl.hp.com>
6  *
7  * Derived from i386 and Alpha versions.
8  */
9
10 #include <linux/errno.h>
11 #include <linux/kernel.h>
12 #include <linux/mm.h>
13 #include <linux/ptrace.h>
14 #include <linux/tracehook.h>
15 #include <linux/sched.h>
16 #include <linux/signal.h>
17 #include <linux/smp.h>
18 #include <linux/stddef.h>
19 #include <linux/tty.h>
20 #include <linux/binfmts.h>
21 #include <linux/unistd.h>
22 #include <linux/wait.h>
23
24 #include <asm/intrinsics.h>
25 #include <asm/uaccess.h>
26 #include <asm/rse.h>
27 #include <asm/sigcontext.h>
28
29 #include "sigframe.h"
30
31 #define DEBUG_SIG       0
32 #define STACK_ALIGN     16              /* minimal alignment for stack pointer */
33
34 #if _NSIG_WORDS > 1
35 # define PUT_SIGSET(k,u)        __copy_to_user((u)->sig, (k)->sig, sizeof(sigset_t))
36 # define GET_SIGSET(k,u)        __copy_from_user((k)->sig, (u)->sig, sizeof(sigset_t))
37 #else
38 # define PUT_SIGSET(k,u)        __put_user((k)->sig[0], &(u)->sig[0])
39 # define GET_SIGSET(k,u)        __get_user((k)->sig[0], &(u)->sig[0])
40 #endif
41
42 asmlinkage long
43 sys_sigaltstack (const stack_t __user *uss, stack_t __user *uoss, long arg2,
44                  long arg3, long arg4, long arg5, long arg6, long arg7,
45                  struct pt_regs regs)
46 {
47         return do_sigaltstack(uss, uoss, regs.r12);
48 }
49
50 static long
51 restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
52 {
53         unsigned long ip, flags, nat, um, cfm, rsc;
54         long err;
55
56         /* Always make any pending restarted system calls return -EINTR */
57         current_thread_info()->restart_block.fn = do_no_restart_syscall;
58
59         /* restore scratch that always needs gets updated during signal delivery: */
60         err  = __get_user(flags, &sc->sc_flags);
61         err |= __get_user(nat, &sc->sc_nat);
62         err |= __get_user(ip, &sc->sc_ip);                      /* instruction pointer */
63         err |= __get_user(cfm, &sc->sc_cfm);
64         err |= __get_user(um, &sc->sc_um);                      /* user mask */
65         err |= __get_user(rsc, &sc->sc_ar_rsc);
66         err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
67         err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
68         err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
69         err |= __get_user(scr->pt.pr, &sc->sc_pr);              /* predicates */
70         err |= __get_user(scr->pt.b0, &sc->sc_br[0]);           /* b0 (rp) */
71         err |= __get_user(scr->pt.b6, &sc->sc_br[6]);           /* b6 */
72         err |= __copy_from_user(&scr->pt.r1, &sc->sc_gr[1], 8); /* r1 */
73         err |= __copy_from_user(&scr->pt.r8, &sc->sc_gr[8], 4*8);       /* r8-r11 */
74         err |= __copy_from_user(&scr->pt.r12, &sc->sc_gr[12], 2*8);     /* r12-r13 */
75         err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8);       /* r15 */
76
77         scr->pt.cr_ifs = cfm | (1UL << 63);
78         scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
79
80         /* establish new instruction pointer: */
81         scr->pt.cr_iip = ip & ~0x3UL;
82         ia64_psr(&scr->pt)->ri = ip & 0x3;
83         scr->pt.cr_ipsr = (scr->pt.cr_ipsr & ~IA64_PSR_UM) | (um & IA64_PSR_UM);
84
85         scr->scratch_unat = ia64_put_scratch_nat_bits(&scr->pt, nat);
86
87         if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
88                 /* Restore most scratch-state only when not in syscall. */
89                 err |= __get_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);              /* ar.ccv */
90                 err |= __get_user(scr->pt.b7, &sc->sc_br[7]);                   /* b7 */
91                 err |= __get_user(scr->pt.r14, &sc->sc_gr[14]);                 /* r14 */
92                 err |= __copy_from_user(&scr->pt.ar_csd, &sc->sc_ar25, 2*8); /* ar.csd & ar.ssd */
93                 err |= __copy_from_user(&scr->pt.r2, &sc->sc_gr[2], 2*8);       /* r2-r3 */
94                 err |= __copy_from_user(&scr->pt.r16, &sc->sc_gr[16], 16*8);    /* r16-r31 */
95         }
96
97         if ((flags & IA64_SC_FLAG_FPH_VALID) != 0) {
98                 struct ia64_psr *psr = ia64_psr(&scr->pt);
99
100                 err |= __copy_from_user(current->thread.fph, &sc->sc_fr[32], 96*16);
101                 psr->mfh = 0;   /* drop signal handler's fph contents... */
102                 preempt_disable();
103                 if (psr->dfh)
104                         ia64_drop_fpu(current);
105                 else {
106                         /* We already own the local fph, otherwise psr->dfh wouldn't be 0.  */
107                         __ia64_load_fpu(current->thread.fph);
108                         ia64_set_local_fpu_owner(current);
109                 }
110                 preempt_enable();
111         }
112         return err;
113 }
114
115 int
116 copy_siginfo_to_user (siginfo_t __user *to, siginfo_t *from)
117 {
118         if (!access_ok(VERIFY_WRITE, to, sizeof(siginfo_t)))
119                 return -EFAULT;
120         if (from->si_code < 0) {
121                 if (__copy_to_user(to, from, sizeof(siginfo_t)))
122                         return -EFAULT;
123                 return 0;
124         } else {
125                 int err;
126
127                 /*
128                  * If you change siginfo_t structure, please be sure this code is fixed
129                  * accordingly.  It should never copy any pad contained in the structure
130                  * to avoid security leaks, but must copy the generic 3 ints plus the
131                  * relevant union member.
132                  */
133                 err = __put_user(from->si_signo, &to->si_signo);
134                 err |= __put_user(from->si_errno, &to->si_errno);
135                 err |= __put_user((short)from->si_code, &to->si_code);
136                 switch (from->si_code >> 16) {
137                       case __SI_FAULT >> 16:
138                         err |= __put_user(from->si_flags, &to->si_flags);
139                         err |= __put_user(from->si_isr, &to->si_isr);
140                       case __SI_POLL >> 16:
141                         err |= __put_user(from->si_addr, &to->si_addr);
142                         err |= __put_user(from->si_imm, &to->si_imm);
143                         break;
144                       case __SI_TIMER >> 16:
145                         err |= __put_user(from->si_tid, &to->si_tid);
146                         err |= __put_user(from->si_overrun, &to->si_overrun);
147                         err |= __put_user(from->si_ptr, &to->si_ptr);
148                         break;
149                       case __SI_RT >> 16:       /* Not generated by the kernel as of now.  */
150                       case __SI_MESGQ >> 16:
151                         err |= __put_user(from->si_uid, &to->si_uid);
152                         err |= __put_user(from->si_pid, &to->si_pid);
153                         err |= __put_user(from->si_ptr, &to->si_ptr);
154                         break;
155                       case __SI_CHLD >> 16:
156                         err |= __put_user(from->si_utime, &to->si_utime);
157                         err |= __put_user(from->si_stime, &to->si_stime);
158                         err |= __put_user(from->si_status, &to->si_status);
159                       default:
160                         err |= __put_user(from->si_uid, &to->si_uid);
161                         err |= __put_user(from->si_pid, &to->si_pid);
162                         break;
163                 }
164                 return err;
165         }
166 }
167
168 long
169 ia64_rt_sigreturn (struct sigscratch *scr)
170 {
171         extern char ia64_strace_leave_kernel, ia64_leave_kernel;
172         struct sigcontext __user *sc;
173         struct siginfo si;
174         sigset_t set;
175         long retval;
176
177         sc = &((struct sigframe __user *) (scr->pt.r12 + 16))->sc;
178
179         /*
180          * When we return to the previously executing context, r8 and r10 have already
181          * been setup the way we want them.  Indeed, if the signal wasn't delivered while
182          * in a system call, we must not touch r8 or r10 as otherwise user-level state
183          * could be corrupted.
184          */
185         retval = (long) &ia64_leave_kernel;
186         if (test_thread_flag(TIF_SYSCALL_TRACE)
187             || test_thread_flag(TIF_SYSCALL_AUDIT))
188                 /*
189                  * strace expects to be notified after sigreturn returns even though the
190                  * context to which we return may not be in the middle of a syscall.
191                  * Thus, the return-value that strace displays for sigreturn is
192                  * meaningless.
193                  */
194                 retval = (long) &ia64_strace_leave_kernel;
195
196         if (!access_ok(VERIFY_READ, sc, sizeof(*sc)))
197                 goto give_sigsegv;
198
199         if (GET_SIGSET(&set, &sc->sc_mask))
200                 goto give_sigsegv;
201
202         set_current_blocked(&set);
203
204         if (restore_sigcontext(sc, scr))
205                 goto give_sigsegv;
206
207 #if DEBUG_SIG
208         printk("SIG return (%s:%d): sp=%lx ip=%lx\n",
209                current->comm, current->pid, scr->pt.r12, scr->pt.cr_iip);
210 #endif
211         /*
212          * It is more difficult to avoid calling this function than to
213          * call it and ignore errors.
214          */
215         do_sigaltstack(&sc->sc_stack, NULL, scr->pt.r12);
216         return retval;
217
218   give_sigsegv:
219         si.si_signo = SIGSEGV;
220         si.si_errno = 0;
221         si.si_code = SI_KERNEL;
222         si.si_pid = task_pid_vnr(current);
223         si.si_uid = current_uid();
224         si.si_addr = sc;
225         force_sig_info(SIGSEGV, &si, current);
226         return retval;
227 }
228
229 /*
230  * This does just the minimum required setup of sigcontext.
231  * Specifically, it only installs data that is either not knowable at
232  * the user-level or that gets modified before execution in the
233  * trampoline starts.  Everything else is done at the user-level.
234  */
235 static long
236 setup_sigcontext (struct sigcontext __user *sc, sigset_t *mask, struct sigscratch *scr)
237 {
238         unsigned long flags = 0, ifs, cfm, nat;
239         long err = 0;
240
241         ifs = scr->pt.cr_ifs;
242
243         if (on_sig_stack((unsigned long) sc))
244                 flags |= IA64_SC_FLAG_ONSTACK;
245         if ((ifs & (1UL << 63)) == 0)
246                 /* if cr_ifs doesn't have the valid bit set, we got here through a syscall */
247                 flags |= IA64_SC_FLAG_IN_SYSCALL;
248         cfm = ifs & ((1UL << 38) - 1);
249         ia64_flush_fph(current);
250         if ((current->thread.flags & IA64_THREAD_FPH_VALID)) {
251                 flags |= IA64_SC_FLAG_FPH_VALID;
252                 err = __copy_to_user(&sc->sc_fr[32], current->thread.fph, 96*16);
253         }
254
255         nat = ia64_get_scratch_nat_bits(&scr->pt, scr->scratch_unat);
256
257         err |= __put_user(flags, &sc->sc_flags);
258         err |= __put_user(nat, &sc->sc_nat);
259         err |= PUT_SIGSET(mask, &sc->sc_mask);
260         err |= __put_user(cfm, &sc->sc_cfm);
261         err |= __put_user(scr->pt.cr_ipsr & IA64_PSR_UM, &sc->sc_um);
262         err |= __put_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
263         err |= __put_user(scr->pt.ar_unat, &sc->sc_ar_unat);            /* ar.unat */
264         err |= __put_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);            /* ar.fpsr */
265         err |= __put_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
266         err |= __put_user(scr->pt.pr, &sc->sc_pr);                      /* predicates */
267         err |= __put_user(scr->pt.b0, &sc->sc_br[0]);                   /* b0 (rp) */
268         err |= __put_user(scr->pt.b6, &sc->sc_br[6]);                   /* b6 */
269         err |= __copy_to_user(&sc->sc_gr[1], &scr->pt.r1, 8);           /* r1 */
270         err |= __copy_to_user(&sc->sc_gr[8], &scr->pt.r8, 4*8);         /* r8-r11 */
271         err |= __copy_to_user(&sc->sc_gr[12], &scr->pt.r12, 2*8);       /* r12-r13 */
272         err |= __copy_to_user(&sc->sc_gr[15], &scr->pt.r15, 8);         /* r15 */
273         err |= __put_user(scr->pt.cr_iip + ia64_psr(&scr->pt)->ri, &sc->sc_ip);
274
275         if (!(flags & IA64_SC_FLAG_IN_SYSCALL)) {
276                 /* Copy scratch regs to sigcontext if the signal didn't interrupt a syscall. */
277                 err |= __put_user(scr->pt.ar_ccv, &sc->sc_ar_ccv);              /* ar.ccv */
278                 err |= __put_user(scr->pt.b7, &sc->sc_br[7]);                   /* b7 */
279                 err |= __put_user(scr->pt.r14, &sc->sc_gr[14]);                 /* r14 */
280                 err |= __copy_to_user(&sc->sc_ar25, &scr->pt.ar_csd, 2*8); /* ar.csd & ar.ssd */
281                 err |= __copy_to_user(&sc->sc_gr[2], &scr->pt.r2, 2*8);         /* r2-r3 */
282                 err |= __copy_to_user(&sc->sc_gr[16], &scr->pt.r16, 16*8);      /* r16-r31 */
283         }
284         return err;
285 }
286
287 /*
288  * Check whether the register-backing store is already on the signal stack.
289  */
290 static inline int
291 rbs_on_sig_stack (unsigned long bsp)
292 {
293         return (bsp - current->sas_ss_sp < current->sas_ss_size);
294 }
295
296 static long
297 force_sigsegv_info (int sig, void __user *addr)
298 {
299         unsigned long flags;
300         struct siginfo si;
301
302         if (sig == SIGSEGV) {
303                 /*
304                  * Acquiring siglock around the sa_handler-update is almost
305                  * certainly overkill, but this isn't a
306                  * performance-critical path and I'd rather play it safe
307                  * here than having to debug a nasty race if and when
308                  * something changes in kernel/signal.c that would make it
309                  * no longer safe to modify sa_handler without holding the
310                  * lock.
311                  */
312                 spin_lock_irqsave(&current->sighand->siglock, flags);
313                 current->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
314                 spin_unlock_irqrestore(&current->sighand->siglock, flags);
315         }
316         si.si_signo = SIGSEGV;
317         si.si_errno = 0;
318         si.si_code = SI_KERNEL;
319         si.si_pid = task_pid_vnr(current);
320         si.si_uid = current_uid();
321         si.si_addr = addr;
322         force_sig_info(SIGSEGV, &si, current);
323         return 0;
324 }
325
326 static long
327 setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
328              struct sigscratch *scr)
329 {
330         extern char __kernel_sigtramp[];
331         unsigned long tramp_addr, new_rbs = 0, new_sp;
332         struct sigframe __user *frame;
333         long err;
334
335         new_sp = scr->pt.r12;
336         tramp_addr = (unsigned long) __kernel_sigtramp;
337         if (ka->sa.sa_flags & SA_ONSTACK) {
338                 int onstack = sas_ss_flags(new_sp);
339
340                 if (onstack == 0) {
341                         new_sp = current->sas_ss_sp + current->sas_ss_size;
342                         /*
343                          * We need to check for the register stack being on the
344                          * signal stack separately, because it's switched
345                          * separately (memory stack is switched in the kernel,
346                          * register stack is switched in the signal trampoline).
347                          */
348                         if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
349                                 new_rbs = ALIGN(current->sas_ss_sp,
350                                                 sizeof(long));
351                 } else if (onstack == SS_ONSTACK) {
352                         unsigned long check_sp;
353
354                         /*
355                          * If we are on the alternate signal stack and would
356                          * overflow it, don't. Return an always-bogus address
357                          * instead so we will die with SIGSEGV.
358                          */
359                         check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
360                         if (!likely(on_sig_stack(check_sp)))
361                                 return force_sigsegv_info(sig, (void __user *)
362                                                           check_sp);
363                 }
364         }
365         frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
366
367         if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
368                 return force_sigsegv_info(sig, frame);
369
370         err  = __put_user(sig, &frame->arg0);
371         err |= __put_user(&frame->info, &frame->arg1);
372         err |= __put_user(&frame->sc, &frame->arg2);
373         err |= __put_user(new_rbs, &frame->sc.sc_rbs_base);
374         err |= __put_user(0, &frame->sc.sc_loadrs);     /* initialize to zero */
375         err |= __put_user(ka->sa.sa_handler, &frame->handler);
376
377         err |= copy_siginfo_to_user(&frame->info, info);
378
379         err |= __put_user(current->sas_ss_sp, &frame->sc.sc_stack.ss_sp);
380         err |= __put_user(current->sas_ss_size, &frame->sc.sc_stack.ss_size);
381         err |= __put_user(sas_ss_flags(scr->pt.r12), &frame->sc.sc_stack.ss_flags);
382         err |= setup_sigcontext(&frame->sc, set, scr);
383
384         if (unlikely(err))
385                 return force_sigsegv_info(sig, frame);
386
387         scr->pt.r12 = (unsigned long) frame - 16;       /* new stack pointer */
388         scr->pt.ar_fpsr = FPSR_DEFAULT;                 /* reset fpsr for signal handler */
389         scr->pt.cr_iip = tramp_addr;
390         ia64_psr(&scr->pt)->ri = 0;                     /* start executing in first slot */
391         ia64_psr(&scr->pt)->be = 0;                     /* force little-endian byte-order */
392         /*
393          * Force the interruption function mask to zero.  This has no effect when a
394          * system-call got interrupted by a signal (since, in that case, scr->pt_cr_ifs is
395          * ignored), but it has the desirable effect of making it possible to deliver a
396          * signal with an incomplete register frame (which happens when a mandatory RSE
397          * load faults).  Furthermore, it has no negative effect on the getting the user's
398          * dirty partition preserved, because that's governed by scr->pt.loadrs.
399          */
400         scr->pt.cr_ifs = (1UL << 63);
401
402         /*
403          * Note: this affects only the NaT bits of the scratch regs (the ones saved in
404          * pt_regs), which is exactly what we want.
405          */
406         scr->scratch_unat = 0; /* ensure NaT bits of r12 is clear */
407
408 #if DEBUG_SIG
409         printk("SIG deliver (%s:%d): sig=%d sp=%lx ip=%lx handler=%p\n",
410                current->comm, current->pid, sig, scr->pt.r12, frame->sc.sc_ip, frame->handler);
411 #endif
412         return 1;
413 }
414
415 static long
416 handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
417                struct sigscratch *scr)
418 {
419         if (!setup_frame(sig, ka, info, sigmask_to_save(), scr))
420                 return 0;
421
422         signal_delivered(sig, info, ka, &scr->pt,
423                                  test_thread_flag(TIF_SINGLESTEP));
424
425         return 1;
426 }
427
428 /*
429  * Note that `init' is a special process: it doesn't get signals it doesn't want to
430  * handle.  Thus you cannot kill init even with a SIGKILL even by mistake.
431  */
432 void
433 ia64_do_signal (struct sigscratch *scr, long in_syscall)
434 {
435         struct k_sigaction ka;
436         siginfo_t info;
437         long restart = in_syscall;
438         long errno = scr->pt.r8;
439
440         /*
441          * In the ia64_leave_kernel code path, we want the common case to go fast, which
442          * is why we may in certain cases get here from kernel mode. Just return without
443          * doing anything if so.
444          */
445         if (!user_mode(&scr->pt))
446                 return;
447
448         /*
449          * This only loops in the rare cases of handle_signal() failing, in which case we
450          * need to push through a forced SIGSEGV.
451          */
452         while (1) {
453                 int signr = get_signal_to_deliver(&info, &ka, &scr->pt, NULL);
454
455                 /*
456                  * get_signal_to_deliver() may have run a debugger (via notify_parent())
457                  * and the debugger may have modified the state (e.g., to arrange for an
458                  * inferior call), thus it's important to check for restarting _after_
459                  * get_signal_to_deliver().
460                  */
461                 if ((long) scr->pt.r10 != -1)
462                         /*
463                          * A system calls has to be restarted only if one of the error codes
464                          * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned.  If r10
465                          * isn't -1 then r8 doesn't hold an error code and we don't need to
466                          * restart the syscall, so we can clear the "restart" flag here.
467                          */
468                         restart = 0;
469
470                 if (signr <= 0)
471                         break;
472
473                 if (unlikely(restart)) {
474                         switch (errno) {
475                               case ERESTART_RESTARTBLOCK:
476                               case ERESTARTNOHAND:
477                                 scr->pt.r8 = EINTR;
478                                 /* note: scr->pt.r10 is already -1 */
479                                 break;
480
481                               case ERESTARTSYS:
482                                 if ((ka.sa.sa_flags & SA_RESTART) == 0) {
483                                         scr->pt.r8 = EINTR;
484                                         /* note: scr->pt.r10 is already -1 */
485                                         break;
486                                 }
487                               case ERESTARTNOINTR:
488                                 ia64_decrement_ip(&scr->pt);
489                                 restart = 0; /* don't restart twice if handle_signal() fails... */
490                         }
491                 }
492
493                 /*
494                  * Whee!  Actually deliver the signal.  If the delivery failed, we need to
495                  * continue to iterate in this loop so we can deliver the SIGSEGV...
496                  */
497                 if (handle_signal(signr, &ka, &info, scr))
498                         return;
499         }
500
501         /* Did we come from a system call? */
502         if (restart) {
503                 /* Restart the system call - no handlers present */
504                 if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR
505                     || errno == ERESTART_RESTARTBLOCK)
506                 {
507                         /*
508                          * Note: the syscall number is in r15 which is saved in
509                          * pt_regs so all we need to do here is adjust ip so that
510                          * the "break" instruction gets re-executed.
511                          */
512                         ia64_decrement_ip(&scr->pt);
513                         if (errno == ERESTART_RESTARTBLOCK)
514                                 scr->pt.r15 = __NR_restart_syscall;
515                 }
516         }
517
518         /* if there's no signal to deliver, we just put the saved sigmask
519          * back */
520         restore_saved_sigmask();
521 }