]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/parisc/kernel/firmware.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
[karo-tx-linux.git] / arch / parisc / kernel / firmware.c
1 /*
2  * arch/parisc/kernel/firmware.c  - safe PDC access routines
3  *
4  *      PDC == Processor Dependent Code
5  *
6  * See http://www.parisc-linux.org/documentation/index.html
7  * for documentation describing the entry points and calling
8  * conventions defined below.
9  *
10  * Copyright 1999 SuSE GmbH Nuernberg (Philipp Rumpf, prumpf@tux.org)
11  * Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy)
12  * Copyright 2003 Grant Grundler <grundler parisc-linux org>
13  * Copyright 2003,2004 Ryan Bradetich <rbrad@parisc-linux.org>
14  * Copyright 2004,2006 Thibaut VARENE <varenet@parisc-linux.org>
15  *
16  *    This program is free software; you can redistribute it and/or modify
17  *    it under the terms of the GNU General Public License as published by
18  *    the Free Software Foundation; either version 2 of the License, or
19  *    (at your option) any later version.
20  *
21  */
22
23 /*      I think it would be in everyone's best interest to follow this
24  *      guidelines when writing PDC wrappers:
25  *
26  *       - the name of the pdc wrapper should match one of the macros
27  *         used for the first two arguments
28  *       - don't use caps for random parts of the name
29  *       - use the static PDC result buffers and "copyout" to structs
30  *         supplied by the caller to encapsulate alignment restrictions
31  *       - hold pdc_lock while in PDC or using static result buffers
32  *       - use __pa() to convert virtual (kernel) pointers to physical
33  *         ones.
34  *       - the name of the struct used for pdc return values should equal
35  *         one of the macros used for the first two arguments to the
36  *         corresponding PDC call
37  *       - keep the order of arguments
38  *       - don't be smart (setting trailing NUL bytes for strings, return
39  *         something useful even if the call failed) unless you are sure
40  *         it's not going to affect functionality or performance
41  *
42  *      Example:
43  *      int pdc_cache_info(struct pdc_cache_info *cache_info )
44  *      {
45  *              int retval;
46  *
47  *              spin_lock_irq(&pdc_lock);
48  *              retval = mem_pdc_call(PDC_CACHE,PDC_CACHE_INFO,__pa(cache_info),0);
49  *              convert_to_wide(pdc_result);
50  *              memcpy(cache_info, pdc_result, sizeof(*cache_info));
51  *              spin_unlock_irq(&pdc_lock);
52  *
53  *              return retval;
54  *      }
55  *                                      prumpf  991016  
56  */
57
58 #include <stdarg.h>
59
60 #include <linux/delay.h>
61 #include <linux/init.h>
62 #include <linux/kernel.h>
63 #include <linux/module.h>
64 #include <linux/string.h>
65 #include <linux/spinlock.h>
66
67 #include <asm/page.h>
68 #include <asm/pdc.h>
69 #include <asm/pdcpat.h>
70 #include <asm/processor.h>      /* for boot_cpu_data */
71
72 static DEFINE_SPINLOCK(pdc_lock);
73 extern unsigned long pdc_result[NUM_PDC_RESULT];
74 extern unsigned long pdc_result2[NUM_PDC_RESULT];
75
76 #ifdef CONFIG_64BIT
77 #define WIDE_FIRMWARE 0x1
78 #define NARROW_FIRMWARE 0x2
79
80 /* Firmware needs to be initially set to narrow to determine the 
81  * actual firmware width. */
82 int parisc_narrow_firmware __read_mostly = 1;
83 #endif
84
85 /* On most currently-supported platforms, IODC I/O calls are 32-bit calls
86  * and MEM_PDC calls are always the same width as the OS.
87  * Some PAT boxes may have 64-bit IODC I/O.
88  *
89  * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
90  * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
91  * This allowed wide kernels to run on Cxxx boxes.
92  * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
93  * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
94  */
95
96 #ifdef CONFIG_64BIT
97 long real64_call(unsigned long function, ...);
98 #endif
99 long real32_call(unsigned long function, ...);
100
101 #ifdef CONFIG_64BIT
102 #   define MEM_PDC (unsigned long)(PAGE0->mem_pdc_hi) << 32 | PAGE0->mem_pdc
103 #   define mem_pdc_call(args...) unlikely(parisc_narrow_firmware) ? real32_call(MEM_PDC, args) : real64_call(MEM_PDC, args)
104 #else
105 #   define MEM_PDC (unsigned long)PAGE0->mem_pdc
106 #   define mem_pdc_call(args...) real32_call(MEM_PDC, args)
107 #endif
108
109
110 /**
111  * f_extend - Convert PDC addresses to kernel addresses.
112  * @address: Address returned from PDC.
113  *
114  * This function is used to convert PDC addresses into kernel addresses
115  * when the PDC address size and kernel address size are different.
116  */
117 static unsigned long f_extend(unsigned long address)
118 {
119 #ifdef CONFIG_64BIT
120         if(unlikely(parisc_narrow_firmware)) {
121                 if((address & 0xff000000) == 0xf0000000)
122                         return 0xf0f0f0f000000000UL | (u32)address;
123
124                 if((address & 0xf0000000) == 0xf0000000)
125                         return 0xffffffff00000000UL | (u32)address;
126         }
127 #endif
128         return address;
129 }
130
131 /**
132  * convert_to_wide - Convert the return buffer addresses into kernel addresses.
133  * @address: The return buffer from PDC.
134  *
135  * This function is used to convert the return buffer addresses retrieved from PDC
136  * into kernel addresses when the PDC address size and kernel address size are
137  * different.
138  */
139 static void convert_to_wide(unsigned long *addr)
140 {
141 #ifdef CONFIG_64BIT
142         int i;
143         unsigned int *p = (unsigned int *)addr;
144
145         if(unlikely(parisc_narrow_firmware)) {
146                 for(i = 31; i >= 0; --i)
147                         addr[i] = p[i];
148         }
149 #endif
150 }
151
152 #ifdef CONFIG_64BIT
153 void __cpuinit set_firmware_width_unlocked(void)
154 {
155         int ret;
156
157         ret = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES,
158                 __pa(pdc_result), 0);
159         convert_to_wide(pdc_result);
160         if (pdc_result[0] != NARROW_FIRMWARE)
161                 parisc_narrow_firmware = 0;
162 }
163         
164 /**
165  * set_firmware_width - Determine if the firmware is wide or narrow.
166  * 
167  * This function must be called before any pdc_* function that uses the
168  * convert_to_wide function.
169  */
170 void __cpuinit set_firmware_width(void)
171 {
172         unsigned long flags;
173         spin_lock_irqsave(&pdc_lock, flags);
174         set_firmware_width_unlocked();
175         spin_unlock_irqrestore(&pdc_lock, flags);
176 }
177 #else
178 void __cpuinit set_firmware_width_unlocked(void) {
179         return;
180 }
181
182 void __cpuinit set_firmware_width(void) {
183         return;
184 }
185 #endif /*CONFIG_64BIT*/
186
187 /**
188  * pdc_emergency_unlock - Unlock the linux pdc lock
189  *
190  * This call unlocks the linux pdc lock in case we need some PDC functions
191  * (like pdc_add_valid) during kernel stack dump.
192  */
193 void pdc_emergency_unlock(void)
194 {
195         /* Spinlock DEBUG code freaks out if we unconditionally unlock */
196         if (spin_is_locked(&pdc_lock))
197                 spin_unlock(&pdc_lock);
198 }
199
200
201 /**
202  * pdc_add_valid - Verify address can be accessed without causing a HPMC.
203  * @address: Address to be verified.
204  *
205  * This PDC call attempts to read from the specified address and verifies
206  * if the address is valid.
207  * 
208  * The return value is PDC_OK (0) in case accessing this address is valid.
209  */
210 int pdc_add_valid(unsigned long address)
211 {
212         int retval;
213         unsigned long flags;
214
215         spin_lock_irqsave(&pdc_lock, flags);
216         retval = mem_pdc_call(PDC_ADD_VALID, PDC_ADD_VALID_VERIFY, address);
217         spin_unlock_irqrestore(&pdc_lock, flags);
218
219         return retval;
220 }
221 EXPORT_SYMBOL(pdc_add_valid);
222
223 /**
224  * pdc_chassis_info - Return chassis information.
225  * @result: The return buffer.
226  * @chassis_info: The memory buffer address.
227  * @len: The size of the memory buffer address.
228  *
229  * An HVERSION dependent call for returning the chassis information.
230  */
231 int __init pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len)
232 {
233         int retval;
234         unsigned long flags;
235
236         spin_lock_irqsave(&pdc_lock, flags);
237         memcpy(&pdc_result, chassis_info, sizeof(*chassis_info));
238         memcpy(&pdc_result2, led_info, len);
239         retval = mem_pdc_call(PDC_CHASSIS, PDC_RETURN_CHASSIS_INFO,
240                               __pa(pdc_result), __pa(pdc_result2), len);
241         memcpy(chassis_info, pdc_result, sizeof(*chassis_info));
242         memcpy(led_info, pdc_result2, len);
243         spin_unlock_irqrestore(&pdc_lock, flags);
244
245         return retval;
246 }
247
248 /**
249  * pdc_pat_chassis_send_log - Sends a PDC PAT CHASSIS log message.
250  * @retval: -1 on error, 0 on success. Other value are PDC errors
251  * 
252  * Must be correctly formatted or expect system crash
253  */
254 #ifdef CONFIG_64BIT
255 int pdc_pat_chassis_send_log(unsigned long state, unsigned long data)
256 {
257         int retval = 0;
258         unsigned long flags;
259         
260         if (!is_pdc_pat())
261                 return -1;
262
263         spin_lock_irqsave(&pdc_lock, flags);
264         retval = mem_pdc_call(PDC_PAT_CHASSIS_LOG, PDC_PAT_CHASSIS_WRITE_LOG, __pa(&state), __pa(&data));
265         spin_unlock_irqrestore(&pdc_lock, flags);
266
267         return retval;
268 }
269 #endif
270
271 /**
272  * pdc_chassis_disp - Updates chassis code
273  * @retval: -1 on error, 0 on success
274  */
275 int pdc_chassis_disp(unsigned long disp)
276 {
277         int retval = 0;
278         unsigned long flags;
279
280         spin_lock_irqsave(&pdc_lock, flags);
281         retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_DISP, disp);
282         spin_unlock_irqrestore(&pdc_lock, flags);
283
284         return retval;
285 }
286
287 /**
288  * pdc_chassis_warn - Fetches chassis warnings
289  * @retval: -1 on error, 0 on success
290  */
291 int pdc_chassis_warn(unsigned long *warn)
292 {
293         int retval = 0;
294         unsigned long flags;
295
296         spin_lock_irqsave(&pdc_lock, flags);
297         retval = mem_pdc_call(PDC_CHASSIS, PDC_CHASSIS_WARN, __pa(pdc_result));
298         *warn = pdc_result[0];
299         spin_unlock_irqrestore(&pdc_lock, flags);
300
301         return retval;
302 }
303
304 int __cpuinit pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info)
305 {
306         int ret;
307
308         ret = mem_pdc_call(PDC_COPROC, PDC_COPROC_CFG, __pa(pdc_result));
309         convert_to_wide(pdc_result);
310         pdc_coproc_info->ccr_functional = pdc_result[0];
311         pdc_coproc_info->ccr_present = pdc_result[1];
312         pdc_coproc_info->revision = pdc_result[17];
313         pdc_coproc_info->model = pdc_result[18];
314
315         return ret;
316 }
317
318 /**
319  * pdc_coproc_cfg - To identify coprocessors attached to the processor.
320  * @pdc_coproc_info: Return buffer address.
321  *
322  * This PDC call returns the presence and status of all the coprocessors
323  * attached to the processor.
324  */
325 int __cpuinit pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info)
326 {
327         int ret;
328         unsigned long flags;
329
330         spin_lock_irqsave(&pdc_lock, flags);
331         ret = pdc_coproc_cfg_unlocked(pdc_coproc_info);
332         spin_unlock_irqrestore(&pdc_lock, flags);
333
334         return ret;
335 }
336
337 /**
338  * pdc_iodc_read - Read data from the modules IODC.
339  * @actcnt: The actual number of bytes.
340  * @hpa: The HPA of the module for the iodc read.
341  * @index: The iodc entry point.
342  * @iodc_data: A buffer memory for the iodc options.
343  * @iodc_data_size: Size of the memory buffer.
344  *
345  * This PDC call reads from the IODC of the module specified by the hpa
346  * argument.
347  */
348 int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
349                   void *iodc_data, unsigned int iodc_data_size)
350 {
351         int retval;
352         unsigned long flags;
353
354         spin_lock_irqsave(&pdc_lock, flags);
355         retval = mem_pdc_call(PDC_IODC, PDC_IODC_READ, __pa(pdc_result), hpa, 
356                               index, __pa(pdc_result2), iodc_data_size);
357         convert_to_wide(pdc_result);
358         *actcnt = pdc_result[0];
359         memcpy(iodc_data, pdc_result2, iodc_data_size);
360         spin_unlock_irqrestore(&pdc_lock, flags);
361
362         return retval;
363 }
364 EXPORT_SYMBOL(pdc_iodc_read);
365
366 /**
367  * pdc_system_map_find_mods - Locate unarchitected modules.
368  * @pdc_mod_info: Return buffer address.
369  * @mod_path: pointer to dev path structure.
370  * @mod_index: fixed address module index.
371  *
372  * To locate and identify modules which reside at fixed I/O addresses, which
373  * do not self-identify via architected bus walks.
374  */
375 int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
376                              struct pdc_module_path *mod_path, long mod_index)
377 {
378         int retval;
379         unsigned long flags;
380
381         spin_lock_irqsave(&pdc_lock, flags);
382         retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_MODULE, __pa(pdc_result), 
383                               __pa(pdc_result2), mod_index);
384         convert_to_wide(pdc_result);
385         memcpy(pdc_mod_info, pdc_result, sizeof(*pdc_mod_info));
386         memcpy(mod_path, pdc_result2, sizeof(*mod_path));
387         spin_unlock_irqrestore(&pdc_lock, flags);
388
389         pdc_mod_info->mod_addr = f_extend(pdc_mod_info->mod_addr);
390         return retval;
391 }
392
393 /**
394  * pdc_system_map_find_addrs - Retrieve additional address ranges.
395  * @pdc_addr_info: Return buffer address.
396  * @mod_index: Fixed address module index.
397  * @addr_index: Address range index.
398  * 
399  * Retrieve additional information about subsequent address ranges for modules
400  * with multiple address ranges.  
401  */
402 int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info, 
403                               long mod_index, long addr_index)
404 {
405         int retval;
406         unsigned long flags;
407
408         spin_lock_irqsave(&pdc_lock, flags);
409         retval = mem_pdc_call(PDC_SYSTEM_MAP, PDC_FIND_ADDRESS, __pa(pdc_result),
410                               mod_index, addr_index);
411         convert_to_wide(pdc_result);
412         memcpy(pdc_addr_info, pdc_result, sizeof(*pdc_addr_info));
413         spin_unlock_irqrestore(&pdc_lock, flags);
414
415         pdc_addr_info->mod_addr = f_extend(pdc_addr_info->mod_addr);
416         return retval;
417 }
418
419 /**
420  * pdc_model_info - Return model information about the processor.
421  * @model: The return buffer.
422  *
423  * Returns the version numbers, identifiers, and capabilities from the processor module.
424  */
425 int pdc_model_info(struct pdc_model *model) 
426 {
427         int retval;
428         unsigned long flags;
429
430         spin_lock_irqsave(&pdc_lock, flags);
431         retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_INFO, __pa(pdc_result), 0);
432         convert_to_wide(pdc_result);
433         memcpy(model, pdc_result, sizeof(*model));
434         spin_unlock_irqrestore(&pdc_lock, flags);
435
436         return retval;
437 }
438
439 /**
440  * pdc_model_sysmodel - Get the system model name.
441  * @name: A char array of at least 81 characters.
442  *
443  * Get system model name from PDC ROM (e.g. 9000/715 or 9000/778/B160L).
444  * Using OS_ID_HPUX will return the equivalent of the 'modelname' command
445  * on HP/UX.
446  */
447 int pdc_model_sysmodel(char *name)
448 {
449         int retval;
450         unsigned long flags;
451
452         spin_lock_irqsave(&pdc_lock, flags);
453         retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_SYSMODEL, __pa(pdc_result),
454                               OS_ID_HPUX, __pa(name));
455         convert_to_wide(pdc_result);
456
457         if (retval == PDC_OK) {
458                 name[pdc_result[0]] = '\0'; /* add trailing '\0' */
459         } else {
460                 name[0] = 0;
461         }
462         spin_unlock_irqrestore(&pdc_lock, flags);
463
464         return retval;
465 }
466
467 /**
468  * pdc_model_versions - Identify the version number of each processor.
469  * @cpu_id: The return buffer.
470  * @id: The id of the processor to check.
471  *
472  * Returns the version number for each processor component.
473  *
474  * This comment was here before, but I do not know what it means :( -RB
475  * id: 0 = cpu revision, 1 = boot-rom-version
476  */
477 int pdc_model_versions(unsigned long *versions, int id)
478 {
479         int retval;
480         unsigned long flags;
481
482         spin_lock_irqsave(&pdc_lock, flags);
483         retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_VERSIONS, __pa(pdc_result), id);
484         convert_to_wide(pdc_result);
485         *versions = pdc_result[0];
486         spin_unlock_irqrestore(&pdc_lock, flags);
487
488         return retval;
489 }
490
491 /**
492  * pdc_model_cpuid - Returns the CPU_ID.
493  * @cpu_id: The return buffer.
494  *
495  * Returns the CPU_ID value which uniquely identifies the cpu portion of
496  * the processor module.
497  */
498 int pdc_model_cpuid(unsigned long *cpu_id)
499 {
500         int retval;
501         unsigned long flags;
502
503         spin_lock_irqsave(&pdc_lock, flags);
504         pdc_result[0] = 0; /* preset zero (call may not be implemented!) */
505         retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CPU_ID, __pa(pdc_result), 0);
506         convert_to_wide(pdc_result);
507         *cpu_id = pdc_result[0];
508         spin_unlock_irqrestore(&pdc_lock, flags);
509
510         return retval;
511 }
512
513 /**
514  * pdc_model_capabilities - Returns the platform capabilities.
515  * @capabilities: The return buffer.
516  *
517  * Returns information about platform support for 32- and/or 64-bit
518  * OSes, IO-PDIR coherency, and virtual aliasing.
519  */
520 int pdc_model_capabilities(unsigned long *capabilities)
521 {
522         int retval;
523         unsigned long flags;
524
525         spin_lock_irqsave(&pdc_lock, flags);
526         pdc_result[0] = 0; /* preset zero (call may not be implemented!) */
527         retval = mem_pdc_call(PDC_MODEL, PDC_MODEL_CAPABILITIES, __pa(pdc_result), 0);
528         convert_to_wide(pdc_result);
529         if (retval == PDC_OK) {
530                 *capabilities = pdc_result[0];
531         } else {
532                 *capabilities = PDC_MODEL_OS32;
533         }
534         spin_unlock_irqrestore(&pdc_lock, flags);
535
536         return retval;
537 }
538
539 /**
540  * pdc_cache_info - Return cache and TLB information.
541  * @cache_info: The return buffer.
542  *
543  * Returns information about the processor's cache and TLB.
544  */
545 int pdc_cache_info(struct pdc_cache_info *cache_info)
546 {
547         int retval;
548         unsigned long flags;
549
550         spin_lock_irqsave(&pdc_lock, flags);
551         retval = mem_pdc_call(PDC_CACHE, PDC_CACHE_INFO, __pa(pdc_result), 0);
552         convert_to_wide(pdc_result);
553         memcpy(cache_info, pdc_result, sizeof(*cache_info));
554         spin_unlock_irqrestore(&pdc_lock, flags);
555
556         return retval;
557 }
558
559 /**
560  * pdc_spaceid_bits - Return whether Space ID hashing is turned on.
561  * @space_bits: Should be 0, if not, bad mojo!
562  *
563  * Returns information about Space ID hashing.
564  */
565 int pdc_spaceid_bits(unsigned long *space_bits)
566 {
567         int retval;
568         unsigned long flags;
569
570         spin_lock_irqsave(&pdc_lock, flags);
571         pdc_result[0] = 0;
572         retval = mem_pdc_call(PDC_CACHE, PDC_CACHE_RET_SPID, __pa(pdc_result), 0);
573         convert_to_wide(pdc_result);
574         *space_bits = pdc_result[0];
575         spin_unlock_irqrestore(&pdc_lock, flags);
576
577         return retval;
578 }
579
580 #ifndef CONFIG_PA20
581 /**
582  * pdc_btlb_info - Return block TLB information.
583  * @btlb: The return buffer.
584  *
585  * Returns information about the hardware Block TLB.
586  */
587 int pdc_btlb_info(struct pdc_btlb_info *btlb) 
588 {
589         int retval;
590         unsigned long flags;
591
592         spin_lock_irqsave(&pdc_lock, flags);
593         retval = mem_pdc_call(PDC_BLOCK_TLB, PDC_BTLB_INFO, __pa(pdc_result), 0);
594         memcpy(btlb, pdc_result, sizeof(*btlb));
595         spin_unlock_irqrestore(&pdc_lock, flags);
596
597         if(retval < 0) {
598                 btlb->max_size = 0;
599         }
600         return retval;
601 }
602
603 /**
604  * pdc_mem_map_hpa - Find fixed module information.  
605  * @address: The return buffer
606  * @mod_path: pointer to dev path structure.
607  *
608  * This call was developed for S700 workstations to allow the kernel to find
609  * the I/O devices (Core I/O). In the future (Kittyhawk and beyond) this
610  * call will be replaced (on workstations) by the architected PDC_SYSTEM_MAP
611  * call.
612  *
613  * This call is supported by all existing S700 workstations (up to  Gecko).
614  */
615 int pdc_mem_map_hpa(struct pdc_memory_map *address,
616                 struct pdc_module_path *mod_path)
617 {
618         int retval;
619         unsigned long flags;
620
621         spin_lock_irqsave(&pdc_lock, flags);
622         memcpy(pdc_result2, mod_path, sizeof(*mod_path));
623         retval = mem_pdc_call(PDC_MEM_MAP, PDC_MEM_MAP_HPA, __pa(pdc_result),
624                                 __pa(pdc_result2));
625         memcpy(address, pdc_result, sizeof(*address));
626         spin_unlock_irqrestore(&pdc_lock, flags);
627
628         return retval;
629 }
630 #endif  /* !CONFIG_PA20 */
631
632 /**
633  * pdc_lan_station_id - Get the LAN address.
634  * @lan_addr: The return buffer.
635  * @hpa: The network device HPA.
636  *
637  * Get the LAN station address when it is not directly available from the LAN hardware.
638  */
639 int pdc_lan_station_id(char *lan_addr, unsigned long hpa)
640 {
641         int retval;
642         unsigned long flags;
643
644         spin_lock_irqsave(&pdc_lock, flags);
645         retval = mem_pdc_call(PDC_LAN_STATION_ID, PDC_LAN_STATION_ID_READ,
646                         __pa(pdc_result), hpa);
647         if (retval < 0) {
648                 /* FIXME: else read MAC from NVRAM */
649                 memset(lan_addr, 0, PDC_LAN_STATION_ID_SIZE);
650         } else {
651                 memcpy(lan_addr, pdc_result, PDC_LAN_STATION_ID_SIZE);
652         }
653         spin_unlock_irqrestore(&pdc_lock, flags);
654
655         return retval;
656 }
657 EXPORT_SYMBOL(pdc_lan_station_id);
658
659 /**
660  * pdc_stable_read - Read data from Stable Storage.
661  * @staddr: Stable Storage address to access.
662  * @memaddr: The memory address where Stable Storage data shall be copied.
663  * @count: number of bytes to transfer. count is multiple of 4.
664  *
665  * This PDC call reads from the Stable Storage address supplied in staddr
666  * and copies count bytes to the memory address memaddr.
667  * The call will fail if staddr+count > PDC_STABLE size.
668  */
669 int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count)
670 {
671        int retval;
672         unsigned long flags;
673
674        spin_lock_irqsave(&pdc_lock, flags);
675        retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_READ, staddr,
676                __pa(pdc_result), count);
677        convert_to_wide(pdc_result);
678        memcpy(memaddr, pdc_result, count);
679        spin_unlock_irqrestore(&pdc_lock, flags);
680
681        return retval;
682 }
683 EXPORT_SYMBOL(pdc_stable_read);
684
685 /**
686  * pdc_stable_write - Write data to Stable Storage.
687  * @staddr: Stable Storage address to access.
688  * @memaddr: The memory address where Stable Storage data shall be read from.
689  * @count: number of bytes to transfer. count is multiple of 4.
690  *
691  * This PDC call reads count bytes from the supplied memaddr address,
692  * and copies count bytes to the Stable Storage address staddr.
693  * The call will fail if staddr+count > PDC_STABLE size.
694  */
695 int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count)
696 {
697        int retval;
698         unsigned long flags;
699
700        spin_lock_irqsave(&pdc_lock, flags);
701        memcpy(pdc_result, memaddr, count);
702        convert_to_wide(pdc_result);
703        retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_WRITE, staddr,
704                __pa(pdc_result), count);
705        spin_unlock_irqrestore(&pdc_lock, flags);
706
707        return retval;
708 }
709 EXPORT_SYMBOL(pdc_stable_write);
710
711 /**
712  * pdc_stable_get_size - Get Stable Storage size in bytes.
713  * @size: pointer where the size will be stored.
714  *
715  * This PDC call returns the number of bytes in the processor's Stable
716  * Storage, which is the number of contiguous bytes implemented in Stable
717  * Storage starting from staddr=0. size in an unsigned 64-bit integer
718  * which is a multiple of four.
719  */
720 int pdc_stable_get_size(unsigned long *size)
721 {
722        int retval;
723         unsigned long flags;
724
725        spin_lock_irqsave(&pdc_lock, flags);
726        retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_RETURN_SIZE, __pa(pdc_result));
727        *size = pdc_result[0];
728        spin_unlock_irqrestore(&pdc_lock, flags);
729
730        return retval;
731 }
732 EXPORT_SYMBOL(pdc_stable_get_size);
733
734 /**
735  * pdc_stable_verify_contents - Checks that Stable Storage contents are valid.
736  *
737  * This PDC call is meant to be used to check the integrity of the current
738  * contents of Stable Storage.
739  */
740 int pdc_stable_verify_contents(void)
741 {
742        int retval;
743         unsigned long flags;
744
745        spin_lock_irqsave(&pdc_lock, flags);
746        retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_VERIFY_CONTENTS);
747        spin_unlock_irqrestore(&pdc_lock, flags);
748
749        return retval;
750 }
751 EXPORT_SYMBOL(pdc_stable_verify_contents);
752
753 /**
754  * pdc_stable_initialize - Sets Stable Storage contents to zero and initialize
755  * the validity indicator.
756  *
757  * This PDC call will erase all contents of Stable Storage. Use with care!
758  */
759 int pdc_stable_initialize(void)
760 {
761        int retval;
762         unsigned long flags;
763
764        spin_lock_irqsave(&pdc_lock, flags);
765        retval = mem_pdc_call(PDC_STABLE, PDC_STABLE_INITIALIZE);
766        spin_unlock_irqrestore(&pdc_lock, flags);
767
768        return retval;
769 }
770 EXPORT_SYMBOL(pdc_stable_initialize);
771
772 /**
773  * pdc_get_initiator - Get the SCSI Interface Card params (SCSI ID, SDTR, SE or LVD)
774  * @hwpath: fully bc.mod style path to the device.
775  * @initiator: the array to return the result into
776  *
777  * Get the SCSI operational parameters from PDC.
778  * Needed since HPUX never used BIOS or symbios card NVRAM.
779  * Most ncr/sym cards won't have an entry and just use whatever
780  * capabilities of the card are (eg Ultra, LVD). But there are
781  * several cases where it's useful:
782  *    o set SCSI id for Multi-initiator clusters,
783  *    o cable too long (ie SE scsi 10Mhz won't support 6m length),
784  *    o bus width exported is less than what the interface chip supports.
785  */
786 int pdc_get_initiator(struct hardware_path *hwpath, struct pdc_initiator *initiator)
787 {
788         int retval;
789         unsigned long flags;
790
791         spin_lock_irqsave(&pdc_lock, flags);
792
793 /* BCJ-XXXX series boxes. E.G. "9000/785/C3000" */
794 #define IS_SPROCKETS() (strlen(boot_cpu_data.pdc.sys_model_name) == 14 && \
795         strncmp(boot_cpu_data.pdc.sys_model_name, "9000/785", 8) == 0)
796
797         retval = mem_pdc_call(PDC_INITIATOR, PDC_GET_INITIATOR, 
798                               __pa(pdc_result), __pa(hwpath));
799         if (retval < PDC_OK)
800                 goto out;
801
802         if (pdc_result[0] < 16) {
803                 initiator->host_id = pdc_result[0];
804         } else {
805                 initiator->host_id = -1;
806         }
807
808         /*
809          * Sprockets and Piranha return 20 or 40 (MT/s).  Prelude returns
810          * 1, 2, 5 or 10 for 5, 10, 20 or 40 MT/s, respectively
811          */
812         switch (pdc_result[1]) {
813                 case  1: initiator->factor = 50; break;
814                 case  2: initiator->factor = 25; break;
815                 case  5: initiator->factor = 12; break;
816                 case 25: initiator->factor = 10; break;
817                 case 20: initiator->factor = 12; break;
818                 case 40: initiator->factor = 10; break;
819                 default: initiator->factor = -1; break;
820         }
821
822         if (IS_SPROCKETS()) {
823                 initiator->width = pdc_result[4];
824                 initiator->mode = pdc_result[5];
825         } else {
826                 initiator->width = -1;
827                 initiator->mode = -1;
828         }
829
830  out:
831         spin_unlock_irqrestore(&pdc_lock, flags);
832
833         return (retval >= PDC_OK);
834 }
835 EXPORT_SYMBOL(pdc_get_initiator);
836
837
838 /**
839  * pdc_pci_irt_size - Get the number of entries in the interrupt routing table.
840  * @num_entries: The return value.
841  * @hpa: The HPA for the device.
842  *
843  * This PDC function returns the number of entries in the specified cell's
844  * interrupt table.
845  * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes
846  */ 
847 int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa)
848 {
849         int retval;
850         unsigned long flags;
851
852         spin_lock_irqsave(&pdc_lock, flags);
853         retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL_SIZE, 
854                               __pa(pdc_result), hpa);
855         convert_to_wide(pdc_result);
856         *num_entries = pdc_result[0];
857         spin_unlock_irqrestore(&pdc_lock, flags);
858
859         return retval;
860 }
861
862 /** 
863  * pdc_pci_irt - Get the PCI interrupt routing table.
864  * @num_entries: The number of entries in the table.
865  * @hpa: The Hard Physical Address of the device.
866  * @tbl: 
867  *
868  * Get the PCI interrupt routing table for the device at the given HPA.
869  * Similar to PDC_PAT stuff - but added for Forte/Allegro boxes
870  */
871 int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl)
872 {
873         int retval;
874         unsigned long flags;
875
876         BUG_ON((unsigned long)tbl & 0x7);
877
878         spin_lock_irqsave(&pdc_lock, flags);
879         pdc_result[0] = num_entries;
880         retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_GET_INT_TBL, 
881                               __pa(pdc_result), hpa, __pa(tbl));
882         spin_unlock_irqrestore(&pdc_lock, flags);
883
884         return retval;
885 }
886
887
888 #if 0   /* UNTEST CODE - left here in case someone needs it */
889
890 /** 
891  * pdc_pci_config_read - read PCI config space.
892  * @hpa         token from PDC to indicate which PCI device
893  * @pci_addr    configuration space address to read from
894  *
895  * Read PCI Configuration space *before* linux PCI subsystem is running.
896  */
897 unsigned int pdc_pci_config_read(void *hpa, unsigned long cfg_addr)
898 {
899         int retval;
900         unsigned long flags;
901
902         spin_lock_irqsave(&pdc_lock, flags);
903         pdc_result[0] = 0;
904         pdc_result[1] = 0;
905         retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_READ_CONFIG, 
906                               __pa(pdc_result), hpa, cfg_addr&~3UL, 4UL);
907         spin_unlock_irqrestore(&pdc_lock, flags);
908
909         return retval ? ~0 : (unsigned int) pdc_result[0];
910 }
911
912
913 /** 
914  * pdc_pci_config_write - read PCI config space.
915  * @hpa         token from PDC to indicate which PCI device
916  * @pci_addr    configuration space address to write
917  * @val         value we want in the 32-bit register
918  *
919  * Write PCI Configuration space *before* linux PCI subsystem is running.
920  */
921 void pdc_pci_config_write(void *hpa, unsigned long cfg_addr, unsigned int val)
922 {
923         int retval;
924         unsigned long flags;
925
926         spin_lock_irqsave(&pdc_lock, flags);
927         pdc_result[0] = 0;
928         retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_WRITE_CONFIG, 
929                               __pa(pdc_result), hpa,
930                               cfg_addr&~3UL, 4UL, (unsigned long) val);
931         spin_unlock_irqrestore(&pdc_lock, flags);
932
933         return retval;
934 }
935 #endif /* UNTESTED CODE */
936
937 /**
938  * pdc_tod_read - Read the Time-Of-Day clock.
939  * @tod: The return buffer:
940  *
941  * Read the Time-Of-Day clock
942  */
943 int pdc_tod_read(struct pdc_tod *tod)
944 {
945         int retval;
946         unsigned long flags;
947
948         spin_lock_irqsave(&pdc_lock, flags);
949         retval = mem_pdc_call(PDC_TOD, PDC_TOD_READ, __pa(pdc_result), 0);
950         convert_to_wide(pdc_result);
951         memcpy(tod, pdc_result, sizeof(*tod));
952         spin_unlock_irqrestore(&pdc_lock, flags);
953
954         return retval;
955 }
956 EXPORT_SYMBOL(pdc_tod_read);
957
958 /**
959  * pdc_tod_set - Set the Time-Of-Day clock.
960  * @sec: The number of seconds since epoch.
961  * @usec: The number of micro seconds.
962  *
963  * Set the Time-Of-Day clock.
964  */ 
965 int pdc_tod_set(unsigned long sec, unsigned long usec)
966 {
967         int retval;
968         unsigned long flags;
969
970         spin_lock_irqsave(&pdc_lock, flags);
971         retval = mem_pdc_call(PDC_TOD, PDC_TOD_WRITE, sec, usec);
972         spin_unlock_irqrestore(&pdc_lock, flags);
973
974         return retval;
975 }
976 EXPORT_SYMBOL(pdc_tod_set);
977
978 #ifdef CONFIG_64BIT
979 int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
980                 struct pdc_memory_table *tbl, unsigned long entries)
981 {
982         int retval;
983         unsigned long flags;
984
985         spin_lock_irqsave(&pdc_lock, flags);
986         retval = mem_pdc_call(PDC_MEM, PDC_MEM_TABLE, __pa(pdc_result), __pa(pdc_result2), entries);
987         convert_to_wide(pdc_result);
988         memcpy(r_addr, pdc_result, sizeof(*r_addr));
989         memcpy(tbl, pdc_result2, entries * sizeof(*tbl));
990         spin_unlock_irqrestore(&pdc_lock, flags);
991
992         return retval;
993 }
994 #endif /* CONFIG_64BIT */
995
996 /* FIXME: Is this pdc used?  I could not find type reference to ftc_bitmap
997  * so I guessed at unsigned long.  Someone who knows what this does, can fix
998  * it later. :)
999  */
1000 int pdc_do_firm_test_reset(unsigned long ftc_bitmap)
1001 {
1002         int retval;
1003         unsigned long flags;
1004
1005         spin_lock_irqsave(&pdc_lock, flags);
1006         retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_FIRM_TEST_RESET,
1007                               PDC_FIRM_TEST_MAGIC, ftc_bitmap);
1008         spin_unlock_irqrestore(&pdc_lock, flags);
1009
1010         return retval;
1011 }
1012
1013 /*
1014  * pdc_do_reset - Reset the system.
1015  *
1016  * Reset the system.
1017  */
1018 int pdc_do_reset(void)
1019 {
1020         int retval;
1021         unsigned long flags;
1022
1023         spin_lock_irqsave(&pdc_lock, flags);
1024         retval = mem_pdc_call(PDC_BROADCAST_RESET, PDC_DO_RESET);
1025         spin_unlock_irqrestore(&pdc_lock, flags);
1026
1027         return retval;
1028 }
1029
1030 /*
1031  * pdc_soft_power_info - Enable soft power switch.
1032  * @power_reg: address of soft power register
1033  *
1034  * Return the absolute address of the soft power switch register
1035  */
1036 int __init pdc_soft_power_info(unsigned long *power_reg)
1037 {
1038         int retval;
1039         unsigned long flags;
1040
1041         *power_reg = (unsigned long) (-1);
1042         
1043         spin_lock_irqsave(&pdc_lock, flags);
1044         retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_INFO, __pa(pdc_result), 0);
1045         if (retval == PDC_OK) {
1046                 convert_to_wide(pdc_result);
1047                 *power_reg = f_extend(pdc_result[0]);
1048         }
1049         spin_unlock_irqrestore(&pdc_lock, flags);
1050
1051         return retval;
1052 }
1053
1054 /*
1055  * pdc_soft_power_button - Control the soft power button behaviour
1056  * @sw_control: 0 for hardware control, 1 for software control 
1057  *
1058  *
1059  * This PDC function places the soft power button under software or
1060  * hardware control.
1061  * Under software control the OS may control to when to allow to shut 
1062  * down the system. Under hardware control pressing the power button 
1063  * powers off the system immediately.
1064  */
1065 int pdc_soft_power_button(int sw_control)
1066 {
1067         int retval;
1068         unsigned long flags;
1069
1070         spin_lock_irqsave(&pdc_lock, flags);
1071         retval = mem_pdc_call(PDC_SOFT_POWER, PDC_SOFT_POWER_ENABLE, __pa(pdc_result), sw_control);
1072         spin_unlock_irqrestore(&pdc_lock, flags);
1073
1074         return retval;
1075 }
1076
1077 /*
1078  * pdc_io_reset - Hack to avoid overlapping range registers of Bridges devices.
1079  * Primarily a problem on T600 (which parisc-linux doesn't support) but
1080  * who knows what other platform firmware might do with this OS "hook".
1081  */
1082 void pdc_io_reset(void)
1083 {
1084         unsigned long flags;
1085
1086         spin_lock_irqsave(&pdc_lock, flags);
1087         mem_pdc_call(PDC_IO, PDC_IO_RESET, 0);
1088         spin_unlock_irqrestore(&pdc_lock, flags);
1089 }
1090
1091 /*
1092  * pdc_io_reset_devices - Hack to Stop USB controller
1093  *
1094  * If PDC used the usb controller, the usb controller
1095  * is still running and will crash the machines during iommu 
1096  * setup, because of still running DMA. This PDC call
1097  * stops the USB controller.
1098  * Normally called after calling pdc_io_reset().
1099  */
1100 void pdc_io_reset_devices(void)
1101 {
1102         unsigned long flags;
1103
1104         spin_lock_irqsave(&pdc_lock, flags);
1105         mem_pdc_call(PDC_IO, PDC_IO_RESET_DEVICES, 0);
1106         spin_unlock_irqrestore(&pdc_lock, flags);
1107 }
1108
1109 /* locked by pdc_console_lock */
1110 static int __attribute__((aligned(8)))   iodc_retbuf[32];
1111 static char __attribute__((aligned(64))) iodc_dbuf[4096];
1112
1113 /**
1114  * pdc_iodc_print - Console print using IODC.
1115  * @str: the string to output.
1116  * @count: length of str
1117  *
1118  * Note that only these special chars are architected for console IODC io:
1119  * BEL, BS, CR, and LF. Others are passed through.
1120  * Since the HP console requires CR+LF to perform a 'newline', we translate
1121  * "\n" to "\r\n".
1122  */
1123 int pdc_iodc_print(const unsigned char *str, unsigned count)
1124 {
1125         unsigned int i;
1126         unsigned long flags;
1127
1128         for (i = 0; i < count;) {
1129                 switch(str[i]) {
1130                 case '\n':
1131                         iodc_dbuf[i+0] = '\r';
1132                         iodc_dbuf[i+1] = '\n';
1133                         i += 2;
1134                         goto print;
1135                 default:
1136                         iodc_dbuf[i] = str[i];
1137                         i++;
1138                         break;
1139                 }
1140         }
1141
1142 print:
1143         spin_lock_irqsave(&pdc_lock, flags);
1144         real32_call(PAGE0->mem_cons.iodc_io,
1145                     (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
1146                     PAGE0->mem_cons.spa, __pa(PAGE0->mem_cons.dp.layers),
1147                     __pa(iodc_retbuf), 0, __pa(iodc_dbuf), i, 0);
1148         spin_unlock_irqrestore(&pdc_lock, flags);
1149
1150         return i;
1151 }
1152
1153 /**
1154  * pdc_iodc_getc - Read a character (non-blocking) from the PDC console.
1155  *
1156  * Read a character (non-blocking) from the PDC console, returns -1 if
1157  * key is not present.
1158  */
1159 int pdc_iodc_getc(void)
1160 {
1161         int ch;
1162         int status;
1163         unsigned long flags;
1164
1165         /* Bail if no console input device. */
1166         if (!PAGE0->mem_kbd.iodc_io)
1167                 return 0;
1168         
1169         /* wait for a keyboard (rs232)-input */
1170         spin_lock_irqsave(&pdc_lock, flags);
1171         real32_call(PAGE0->mem_kbd.iodc_io,
1172                     (unsigned long)PAGE0->mem_kbd.hpa, ENTRY_IO_CIN,
1173                     PAGE0->mem_kbd.spa, __pa(PAGE0->mem_kbd.dp.layers), 
1174                     __pa(iodc_retbuf), 0, __pa(iodc_dbuf), 1, 0);
1175
1176         ch = *iodc_dbuf;
1177         status = *iodc_retbuf;
1178         spin_unlock_irqrestore(&pdc_lock, flags);
1179
1180         if (status == 0)
1181             return -1;
1182         
1183         return ch;
1184 }
1185
1186 int pdc_sti_call(unsigned long func, unsigned long flags,
1187                  unsigned long inptr, unsigned long outputr,
1188                  unsigned long glob_cfg)
1189 {
1190         int retval;
1191         unsigned long irqflags;
1192
1193         spin_lock_irqsave(&pdc_lock, irqflags);  
1194         retval = real32_call(func, flags, inptr, outputr, glob_cfg);
1195         spin_unlock_irqrestore(&pdc_lock, irqflags);
1196
1197         return retval;
1198 }
1199 EXPORT_SYMBOL(pdc_sti_call);
1200
1201 #ifdef CONFIG_64BIT
1202 /**
1203  * pdc_pat_cell_get_number - Returns the cell number.
1204  * @cell_info: The return buffer.
1205  *
1206  * This PDC call returns the cell number of the cell from which the call
1207  * is made.
1208  */
1209 int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info)
1210 {
1211         int retval;
1212         unsigned long flags;
1213
1214         spin_lock_irqsave(&pdc_lock, flags);
1215         retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_GET_NUMBER, __pa(pdc_result));
1216         memcpy(cell_info, pdc_result, sizeof(*cell_info));
1217         spin_unlock_irqrestore(&pdc_lock, flags);
1218
1219         return retval;
1220 }
1221
1222 /**
1223  * pdc_pat_cell_module - Retrieve the cell's module information.
1224  * @actcnt: The number of bytes written to mem_addr.
1225  * @ploc: The physical location.
1226  * @mod: The module index.
1227  * @view_type: The view of the address type.
1228  * @mem_addr: The return buffer.
1229  *
1230  * This PDC call returns information about each module attached to the cell
1231  * at the specified location.
1232  */
1233 int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod,
1234                         unsigned long view_type, void *mem_addr)
1235 {
1236         int retval;
1237         unsigned long flags;
1238         static struct pdc_pat_cell_mod_maddr_block result __attribute__ ((aligned (8)));
1239
1240         spin_lock_irqsave(&pdc_lock, flags);
1241         retval = mem_pdc_call(PDC_PAT_CELL, PDC_PAT_CELL_MODULE, __pa(pdc_result), 
1242                               ploc, mod, view_type, __pa(&result));
1243         if(!retval) {
1244                 *actcnt = pdc_result[0];
1245                 memcpy(mem_addr, &result, *actcnt);
1246         }
1247         spin_unlock_irqrestore(&pdc_lock, flags);
1248
1249         return retval;
1250 }
1251
1252 /**
1253  * pdc_pat_cpu_get_number - Retrieve the cpu number.
1254  * @cpu_info: The return buffer.
1255  * @hpa: The Hard Physical Address of the CPU.
1256  *
1257  * Retrieve the cpu number for the cpu at the specified HPA.
1258  */
1259 int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa)
1260 {
1261         int retval;
1262         unsigned long flags;
1263
1264         spin_lock_irqsave(&pdc_lock, flags);
1265         retval = mem_pdc_call(PDC_PAT_CPU, PDC_PAT_CPU_GET_NUMBER,
1266                               __pa(&pdc_result), hpa);
1267         memcpy(cpu_info, pdc_result, sizeof(*cpu_info));
1268         spin_unlock_irqrestore(&pdc_lock, flags);
1269
1270         return retval;
1271 }
1272
1273 /**
1274  * pdc_pat_get_irt_size - Retrieve the number of entries in the cell's interrupt table.
1275  * @num_entries: The return value.
1276  * @cell_num: The target cell.
1277  *
1278  * This PDC function returns the number of entries in the specified cell's
1279  * interrupt table.
1280  */
1281 int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num)
1282 {
1283         int retval;
1284         unsigned long flags;
1285
1286         spin_lock_irqsave(&pdc_lock, flags);
1287         retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE,
1288                               __pa(pdc_result), cell_num);
1289         *num_entries = pdc_result[0];
1290         spin_unlock_irqrestore(&pdc_lock, flags);
1291
1292         return retval;
1293 }
1294
1295 /**
1296  * pdc_pat_get_irt - Retrieve the cell's interrupt table.
1297  * @r_addr: The return buffer.
1298  * @cell_num: The target cell.
1299  *
1300  * This PDC function returns the actual interrupt table for the specified cell.
1301  */
1302 int pdc_pat_get_irt(void *r_addr, unsigned long cell_num)
1303 {
1304         int retval;
1305         unsigned long flags;
1306
1307         spin_lock_irqsave(&pdc_lock, flags);
1308         retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_GET_PCI_ROUTING_TABLE,
1309                               __pa(r_addr), cell_num);
1310         spin_unlock_irqrestore(&pdc_lock, flags);
1311
1312         return retval;
1313 }
1314
1315 /**
1316  * pdc_pat_pd_get_addr_map - Retrieve information about memory address ranges.
1317  * @actlen: The return buffer.
1318  * @mem_addr: Pointer to the memory buffer.
1319  * @count: The number of bytes to read from the buffer.
1320  * @offset: The offset with respect to the beginning of the buffer.
1321  *
1322  */
1323 int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, 
1324                             unsigned long count, unsigned long offset)
1325 {
1326         int retval;
1327         unsigned long flags;
1328
1329         spin_lock_irqsave(&pdc_lock, flags);
1330         retval = mem_pdc_call(PDC_PAT_PD, PDC_PAT_PD_GET_ADDR_MAP, __pa(pdc_result), 
1331                               __pa(pdc_result2), count, offset);
1332         *actual_len = pdc_result[0];
1333         memcpy(mem_addr, pdc_result2, *actual_len);
1334         spin_unlock_irqrestore(&pdc_lock, flags);
1335
1336         return retval;
1337 }
1338
1339 /**
1340  * pdc_pat_io_pci_cfg_read - Read PCI configuration space.
1341  * @pci_addr: PCI configuration space address for which the read request is being made.
1342  * @pci_size: Size of read in bytes. Valid values are 1, 2, and 4. 
1343  * @mem_addr: Pointer to return memory buffer.
1344  *
1345  */
1346 int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *mem_addr)
1347 {
1348         int retval;
1349         unsigned long flags;
1350
1351         spin_lock_irqsave(&pdc_lock, flags);
1352         retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_READ,
1353                                         __pa(pdc_result), pci_addr, pci_size);
1354         switch(pci_size) {
1355                 case 1: *(u8 *) mem_addr =  (u8)  pdc_result[0];
1356                 case 2: *(u16 *)mem_addr =  (u16) pdc_result[0];
1357                 case 4: *(u32 *)mem_addr =  (u32) pdc_result[0];
1358         }
1359         spin_unlock_irqrestore(&pdc_lock, flags);
1360
1361         return retval;
1362 }
1363
1364 /**
1365  * pdc_pat_io_pci_cfg_write - Retrieve information about memory address ranges.
1366  * @pci_addr: PCI configuration space address for which the write  request is being made.
1367  * @pci_size: Size of write in bytes. Valid values are 1, 2, and 4. 
1368  * @value: Pointer to 1, 2, or 4 byte value in low order end of argument to be 
1369  *         written to PCI Config space.
1370  *
1371  */
1372 int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val)
1373 {
1374         int retval;
1375         unsigned long flags;
1376
1377         spin_lock_irqsave(&pdc_lock, flags);
1378         retval = mem_pdc_call(PDC_PAT_IO, PDC_PAT_IO_PCI_CONFIG_WRITE,
1379                                 pci_addr, pci_size, val);
1380         spin_unlock_irqrestore(&pdc_lock, flags);
1381
1382         return retval;
1383 }
1384 #endif /* CONFIG_64BIT */
1385
1386
1387 /***************** 32-bit real-mode calls ***********/
1388 /* The struct below is used
1389  * to overlay real_stack (real2.S), preparing a 32-bit call frame.
1390  * real32_call_asm() then uses this stack in narrow real mode
1391  */
1392
1393 struct narrow_stack {
1394         /* use int, not long which is 64 bits */
1395         unsigned int arg13;
1396         unsigned int arg12;
1397         unsigned int arg11;
1398         unsigned int arg10;
1399         unsigned int arg9;
1400         unsigned int arg8;
1401         unsigned int arg7;
1402         unsigned int arg6;
1403         unsigned int arg5;
1404         unsigned int arg4;
1405         unsigned int arg3;
1406         unsigned int arg2;
1407         unsigned int arg1;
1408         unsigned int arg0;
1409         unsigned int frame_marker[8];
1410         unsigned int sp;
1411         /* in reality, there's nearly 8k of stack after this */
1412 };
1413
1414 long real32_call(unsigned long fn, ...)
1415 {
1416         va_list args;
1417         extern struct narrow_stack real_stack;
1418         extern unsigned long real32_call_asm(unsigned int *,
1419                                              unsigned int *, 
1420                                              unsigned int);
1421         
1422         va_start(args, fn);
1423         real_stack.arg0 = va_arg(args, unsigned int);
1424         real_stack.arg1 = va_arg(args, unsigned int);
1425         real_stack.arg2 = va_arg(args, unsigned int);
1426         real_stack.arg3 = va_arg(args, unsigned int);
1427         real_stack.arg4 = va_arg(args, unsigned int);
1428         real_stack.arg5 = va_arg(args, unsigned int);
1429         real_stack.arg6 = va_arg(args, unsigned int);
1430         real_stack.arg7 = va_arg(args, unsigned int);
1431         real_stack.arg8 = va_arg(args, unsigned int);
1432         real_stack.arg9 = va_arg(args, unsigned int);
1433         real_stack.arg10 = va_arg(args, unsigned int);
1434         real_stack.arg11 = va_arg(args, unsigned int);
1435         real_stack.arg12 = va_arg(args, unsigned int);
1436         real_stack.arg13 = va_arg(args, unsigned int);
1437         va_end(args);
1438         
1439         return real32_call_asm(&real_stack.sp, &real_stack.arg0, fn);
1440 }
1441
1442 #ifdef CONFIG_64BIT
1443 /***************** 64-bit real-mode calls ***********/
1444
1445 struct wide_stack {
1446         unsigned long arg0;
1447         unsigned long arg1;
1448         unsigned long arg2;
1449         unsigned long arg3;
1450         unsigned long arg4;
1451         unsigned long arg5;
1452         unsigned long arg6;
1453         unsigned long arg7;
1454         unsigned long arg8;
1455         unsigned long arg9;
1456         unsigned long arg10;
1457         unsigned long arg11;
1458         unsigned long arg12;
1459         unsigned long arg13;
1460         unsigned long frame_marker[2];  /* rp, previous sp */
1461         unsigned long sp;
1462         /* in reality, there's nearly 8k of stack after this */
1463 };
1464
1465 long real64_call(unsigned long fn, ...)
1466 {
1467         va_list args;
1468         extern struct wide_stack real64_stack;
1469         extern unsigned long real64_call_asm(unsigned long *,
1470                                              unsigned long *, 
1471                                              unsigned long);
1472     
1473         va_start(args, fn);
1474         real64_stack.arg0 = va_arg(args, unsigned long);
1475         real64_stack.arg1 = va_arg(args, unsigned long);
1476         real64_stack.arg2 = va_arg(args, unsigned long);
1477         real64_stack.arg3 = va_arg(args, unsigned long);
1478         real64_stack.arg4 = va_arg(args, unsigned long);
1479         real64_stack.arg5 = va_arg(args, unsigned long);
1480         real64_stack.arg6 = va_arg(args, unsigned long);
1481         real64_stack.arg7 = va_arg(args, unsigned long);
1482         real64_stack.arg8 = va_arg(args, unsigned long);
1483         real64_stack.arg9 = va_arg(args, unsigned long);
1484         real64_stack.arg10 = va_arg(args, unsigned long);
1485         real64_stack.arg11 = va_arg(args, unsigned long);
1486         real64_stack.arg12 = va_arg(args, unsigned long);
1487         real64_stack.arg13 = va_arg(args, unsigned long);
1488         va_end(args);
1489         
1490         return real64_call_asm(&real64_stack.sp, &real64_stack.arg0, fn);
1491 }
1492
1493 #endif /* CONFIG_64BIT */
1494