arch/powerpc/kernel/dma-swiotlb.c

   1 /*
   2  * Contains routines needed to support swiotlb for ppc.
   3  *
   4  * Copyright (C) 2009-2010 Freescale Semiconductor, Inc.
   5  * Author: Becky Bruce
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  *
  12  */
  13
  14 #include <linux/dma-mapping.h>
  15 #include <linux/memblock.h>
  16 #include <linux/pfn.h>
  17 #include <linux/of_platform.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/pci.h>
  20
  21 #include <asm/machdep.h>
  22 #include <asm/swiotlb.h>
  23 #include <asm/dma.h>
  24
  25 unsigned int ppc_swiotlb_enable;
  26
  27 static u64 swiotlb_powerpc_get_required(struct device *dev)
  28 {
  29         u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
  30
  31         end = memblock_end_of_DRAM();
  32         if (max_direct_dma_addr && end > max_direct_dma_addr)
  33                 end = max_direct_dma_addr;
  34         end += get_dma_offset(dev);
  35
  36         mask = 1ULL << (fls64(end) - 1);
  37         mask += mask - 1;
  38
  39         return mask;
  40 }
  41
  42 /*
  43  * At the moment, all platforms that use this code only require
  44  * swiotlb to be used if we're operating on HIGHMEM.  Since
  45  * we don't ever call anything other than map_sg, unmap_sg,
  46  * map_page, and unmap_page on highmem, use normal dma_ops
  47  * for everything else.
  48  */
  49 struct dma_map_ops swiotlb_dma_ops = {
  50         .alloc = dma_direct_alloc_coherent,
  51         .free = dma_direct_free_coherent,
  52         .mmap = dma_direct_mmap_coherent,
  53         .map_sg = swiotlb_map_sg_attrs,
  54         .unmap_sg = swiotlb_unmap_sg_attrs,
  55         .dma_supported = swiotlb_dma_supported,
  56         .map_page = swiotlb_map_page,
  57         .unmap_page = swiotlb_unmap_page,
  58         .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
  59         .sync_single_for_device = swiotlb_sync_single_for_device,
  60         .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
  61         .sync_sg_for_device = swiotlb_sync_sg_for_device,
  62         .mapping_error = swiotlb_dma_mapping_error,
  63         .get_required_mask = swiotlb_powerpc_get_required,
  64 };
  65
  66 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
  67 {
  68         struct pci_controller *hose;
  69         struct dev_archdata *sd;
  70
  71         hose = pci_bus_to_host(pdev->bus);
  72         sd = &pdev->dev.archdata;
  73         sd->max_direct_dma_addr =
  74                 hose->dma_window_base_cur + hose->dma_window_size;
  75 }
  76
  77 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
  78                                   unsigned long action, void *data)
  79 {
  80         struct device *dev = data;
  81         struct dev_archdata *sd;
  82
  83         /* We are only intereted in device addition */
  84         if (action != BUS_NOTIFY_ADD_DEVICE)
  85                 return 0;
  86
  87         sd = &dev->archdata;
  88         sd->max_direct_dma_addr = 0;
  89
  90         /* May need to bounce if the device can't address all of DRAM */
  91         if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
  92                 set_dma_ops(dev, &swiotlb_dma_ops);
  93
  94         return NOTIFY_DONE;
  95 }
  96
  97 static struct notifier_block ppc_swiotlb_plat_bus_notifier = {
  98         .notifier_call = ppc_swiotlb_bus_notify,
  99         .priority = 0,
 100 };
 101
 102 int __init swiotlb_setup_bus_notifier(void)
 103 {
 104         bus_register_notifier(&platform_bus_type,
 105                               &ppc_swiotlb_plat_bus_notifier);
 106         return 0;
 107 }
 108
 109 void swiotlb_detect_4g(void)
 110 {
 111         if ((memblock_end_of_DRAM() - 1) > 0xffffffff)
 112                 ppc_swiotlb_enable = 1;
 113 }
 114
 115 static int __init swiotlb_late_init(void)
 116 {
 117         if (ppc_swiotlb_enable) {
 118                 swiotlb_print_info();
 119                 set_pci_dma_ops(&swiotlb_dma_ops);
 120                 ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 121         } else {
 122                 swiotlb_free();
 123         }
 124
 125         return 0;
 126 }
 127 subsys_initcall(swiotlb_late_init);