]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/powerpc/kernel/exceptions-64s.S
Merge branch 'pm-devfreq'
[karo-tx-linux.git] / arch / powerpc / kernel / exceptions-64s.S
1 /*
2  * This file contains the 64-bit "server" PowerPC variant
3  * of the low level exception handling including exception
4  * vectors, exception return, part of the slb and stab
5  * handling and other fixed offset specific things.
6  *
7  * This file is meant to be #included from head_64.S due to
8  * position dependent assembly.
9  *
10  * Most of this originates from head_64.S and thus has the same
11  * copyright history.
12  *
13  */
14
15 #include <asm/hw_irq.h>
16 #include <asm/exception-64s.h>
17 #include <asm/ptrace.h>
18
19 /*
20  * We layout physical memory as follows:
21  * 0x0000 - 0x00ff : Secondary processor spin code
22  * 0x0100 - 0x17ff : pSeries Interrupt prologs
23  * 0x1800 - 0x4000 : interrupt support common interrupt prologs
24  * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
25  * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
26  * 0x7000 - 0x7fff : FWNMI data area
27  * 0x8000 - 0x8fff : Initial (CPU0) segment table
28  * 0x9000 -        : Early init and support code
29  */
30         /* Syscall routine is used twice, in reloc-off and reloc-on paths */
31 #define SYSCALL_PSERIES_1                                       \
32 BEGIN_FTR_SECTION                                               \
33         cmpdi   r0,0x1ebe ;                                     \
34         beq-    1f ;                                            \
35 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)                          \
36         mr      r9,r13 ;                                        \
37         GET_PACA(r13) ;                                         \
38         mfspr   r11,SPRN_SRR0 ;                                 \
39 0:
40
41 #define SYSCALL_PSERIES_2_RFID                                  \
42         mfspr   r12,SPRN_SRR1 ;                                 \
43         ld      r10,PACAKBASE(r13) ;                            \
44         LOAD_HANDLER(r10, system_call_entry) ;                  \
45         mtspr   SPRN_SRR0,r10 ;                                 \
46         ld      r10,PACAKMSR(r13) ;                             \
47         mtspr   SPRN_SRR1,r10 ;                                 \
48         rfid ;                                                  \
49         b       . ;     /* prevent speculative execution */
50
51 #define SYSCALL_PSERIES_3                                       \
52         /* Fast LE/BE switch system call */                     \
53 1:      mfspr   r12,SPRN_SRR1 ;                                 \
54         xori    r12,r12,MSR_LE ;                                \
55         mtspr   SPRN_SRR1,r12 ;                                 \
56         rfid ;          /* return to userspace */               \
57         b       . ;     /* prevent speculative execution */
58
59 #if defined(CONFIG_RELOCATABLE)
60         /*
61          * We can't branch directly; in the direct case we use LR
62          * and system_call_entry restores LR.  (We thus need to move
63          * LR to r10 in the RFID case too.)
64          */
65 #define SYSCALL_PSERIES_2_DIRECT                                \
66         mflr    r10 ;                                           \
67         ld      r12,PACAKBASE(r13) ;                            \
68         LOAD_HANDLER(r12, system_call_entry_direct) ;           \
69         mtctr   r12 ;                                           \
70         mfspr   r12,SPRN_SRR1 ;                                 \
71         /* Re-use of r13... No spare regs to do this */ \
72         li      r13,MSR_RI ;                                    \
73         mtmsrd  r13,1 ;                                         \
74         GET_PACA(r13) ; /* get r13 back */                      \
75         bctr ;
76 #else
77         /* We can branch directly */
78 #define SYSCALL_PSERIES_2_DIRECT                                \
79         mfspr   r12,SPRN_SRR1 ;                                 \
80         li      r10,MSR_RI ;                                    \
81         mtmsrd  r10,1 ;                 /* Set RI (EE=0) */     \
82         b       system_call_entry_direct ;
83 #endif
84
85 /*
86  * This is the start of the interrupt handlers for pSeries
87  * This code runs with relocation off.
88  * Code from here to __end_interrupts gets copied down to real
89  * address 0x100 when we are running a relocatable kernel.
90  * Therefore any relative branches in this section must only
91  * branch to labels in this section.
92  */
93         . = 0x100
94         .globl __start_interrupts
95 __start_interrupts:
96
97         .globl system_reset_pSeries;
98 system_reset_pSeries:
99         HMT_MEDIUM_PPR_DISCARD
100         SET_SCRATCH0(r13)
101 #ifdef CONFIG_PPC_P7_NAP
102 BEGIN_FTR_SECTION
103         /* Running native on arch 2.06 or later, check if we are
104          * waking up from nap. We only handle no state loss and
105          * supervisor state loss. We do -not- handle hypervisor
106          * state loss at this time.
107          */
108         mfspr   r13,SPRN_SRR1
109         rlwinm. r13,r13,47-31,30,31
110         beq     9f
111
112         /* waking up from powersave (nap) state */
113         cmpwi   cr1,r13,2
114         /* Total loss of HV state is fatal, we could try to use the
115          * PIR to locate a PACA, then use an emergency stack etc...
116          * OPAL v3 based powernv platforms have new idle states
117          * which fall in this catagory.
118          */
119         bgt     cr1,8f
120         GET_PACA(r13)
121
122 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
123         li      r0,KVM_HWTHREAD_IN_KERNEL
124         stb     r0,HSTATE_HWTHREAD_STATE(r13)
125         /* Order setting hwthread_state vs. testing hwthread_req */
126         sync
127         lbz     r0,HSTATE_HWTHREAD_REQ(r13)
128         cmpwi   r0,0
129         beq     1f
130         b       kvm_start_guest
131 1:
132 #endif
133
134         beq     cr1,2f
135         b       .power7_wakeup_noloss
136 2:      b       .power7_wakeup_loss
137
138         /* Fast Sleep wakeup on PowerNV */
139 8:      GET_PACA(r13)
140         b       .power7_wakeup_tb_loss
141
142 9:
143 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
144 #endif /* CONFIG_PPC_P7_NAP */
145         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
146                                  NOTEST, 0x100)
147
148         . = 0x200
149 machine_check_pSeries_1:
150         /* This is moved out of line as it can be patched by FW, but
151          * some code path might still want to branch into the original
152          * vector
153          */
154         HMT_MEDIUM_PPR_DISCARD
155         SET_SCRATCH0(r13)               /* save r13 */
156 #ifdef CONFIG_PPC_P7_NAP
157 BEGIN_FTR_SECTION
158         /* Running native on arch 2.06 or later, check if we are
159          * waking up from nap. We only handle no state loss and
160          * supervisor state loss. We do -not- handle hypervisor
161          * state loss at this time.
162          */
163         mfspr   r13,SPRN_SRR1
164         rlwinm. r13,r13,47-31,30,31
165         OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
166         beq     9f
167
168         mfspr   r13,SPRN_SRR1
169         rlwinm. r13,r13,47-31,30,31
170         /* waking up from powersave (nap) state */
171         cmpwi   cr1,r13,2
172         /* Total loss of HV state is fatal. let's just stay stuck here */
173         OPT_GET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
174         bgt     cr1,.
175 9:
176         OPT_SET_SPR(r13, SPRN_CFAR, CPU_FTR_CFAR)
177 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
178 #endif /* CONFIG_PPC_P7_NAP */
179         EXCEPTION_PROLOG_0(PACA_EXMC)
180 BEGIN_FTR_SECTION
181         b       machine_check_pSeries_early
182 FTR_SECTION_ELSE
183         b       machine_check_pSeries_0
184 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
185
186         . = 0x300
187         .globl data_access_pSeries
188 data_access_pSeries:
189         HMT_MEDIUM_PPR_DISCARD
190         SET_SCRATCH0(r13)
191 BEGIN_FTR_SECTION
192         b       data_access_check_stab
193 data_access_not_stab:
194 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
195         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common, EXC_STD,
196                                  KVMTEST, 0x300)
197
198         . = 0x380
199         .globl data_access_slb_pSeries
200 data_access_slb_pSeries:
201         HMT_MEDIUM_PPR_DISCARD
202         SET_SCRATCH0(r13)
203         EXCEPTION_PROLOG_0(PACA_EXSLB)
204         EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST, 0x380)
205         std     r3,PACA_EXSLB+EX_R3(r13)
206         mfspr   r3,SPRN_DAR
207 #ifdef __DISABLED__
208         /* Keep that around for when we re-implement dynamic VSIDs */
209         cmpdi   r3,0
210         bge     slb_miss_user_pseries
211 #endif /* __DISABLED__ */
212         mfspr   r12,SPRN_SRR1
213 #ifndef CONFIG_RELOCATABLE
214         b       .slb_miss_realmode
215 #else
216         /*
217          * We can't just use a direct branch to .slb_miss_realmode
218          * because the distance from here to there depends on where
219          * the kernel ends up being put.
220          */
221         mfctr   r11
222         ld      r10,PACAKBASE(r13)
223         LOAD_HANDLER(r10, .slb_miss_realmode)
224         mtctr   r10
225         bctr
226 #endif
227
228         STD_EXCEPTION_PSERIES(0x400, 0x400, instruction_access)
229
230         . = 0x480
231         .globl instruction_access_slb_pSeries
232 instruction_access_slb_pSeries:
233         HMT_MEDIUM_PPR_DISCARD
234         SET_SCRATCH0(r13)
235         EXCEPTION_PROLOG_0(PACA_EXSLB)
236         EXCEPTION_PROLOG_1(PACA_EXSLB, KVMTEST_PR, 0x480)
237         std     r3,PACA_EXSLB+EX_R3(r13)
238         mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
239 #ifdef __DISABLED__
240         /* Keep that around for when we re-implement dynamic VSIDs */
241         cmpdi   r3,0
242         bge     slb_miss_user_pseries
243 #endif /* __DISABLED__ */
244         mfspr   r12,SPRN_SRR1
245 #ifndef CONFIG_RELOCATABLE
246         b       .slb_miss_realmode
247 #else
248         mfctr   r11
249         ld      r10,PACAKBASE(r13)
250         LOAD_HANDLER(r10, .slb_miss_realmode)
251         mtctr   r10
252         bctr
253 #endif
254
255         /* We open code these as we can't have a ". = x" (even with
256          * x = "." within a feature section
257          */
258         . = 0x500;
259         .globl hardware_interrupt_pSeries;
260         .globl hardware_interrupt_hv;
261 hardware_interrupt_pSeries:
262 hardware_interrupt_hv:
263         HMT_MEDIUM_PPR_DISCARD
264         BEGIN_FTR_SECTION
265                 _MASKABLE_EXCEPTION_PSERIES(0x502, hardware_interrupt,
266                                             EXC_HV, SOFTEN_TEST_HV)
267                 KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x502)
268         FTR_SECTION_ELSE
269                 _MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt,
270                                             EXC_STD, SOFTEN_TEST_HV_201)
271                 KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
272         ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
273
274         STD_EXCEPTION_PSERIES(0x600, 0x600, alignment)
275         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x600)
276
277         STD_EXCEPTION_PSERIES(0x700, 0x700, program_check)
278         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x700)
279
280         STD_EXCEPTION_PSERIES(0x800, 0x800, fp_unavailable)
281         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
282
283         . = 0x900
284         .globl decrementer_pSeries
285 decrementer_pSeries:
286         _MASKABLE_EXCEPTION_PSERIES(0x900, decrementer, EXC_STD, SOFTEN_TEST_PR)
287
288         STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
289
290         MASKABLE_EXCEPTION_PSERIES(0xa00, 0xa00, doorbell_super)
291         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
292
293         STD_EXCEPTION_PSERIES(0xb00, 0xb00, trap_0b)
294         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xb00)
295
296         . = 0xc00
297         .globl  system_call_pSeries
298 system_call_pSeries:
299         HMT_MEDIUM
300 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
301         SET_SCRATCH0(r13)
302         GET_PACA(r13)
303         std     r9,PACA_EXGEN+EX_R9(r13)
304         std     r10,PACA_EXGEN+EX_R10(r13)
305         mfcr    r9
306         KVMTEST(0xc00)
307         GET_SCRATCH0(r13)
308 #endif
309         SYSCALL_PSERIES_1
310         SYSCALL_PSERIES_2_RFID
311         SYSCALL_PSERIES_3
312         KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
313
314         STD_EXCEPTION_PSERIES(0xd00, 0xd00, single_step)
315         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xd00)
316
317         /* At 0xe??? we have a bunch of hypervisor exceptions, we branch
318          * out of line to handle them
319          */
320         . = 0xe00
321 hv_data_storage_trampoline:
322         SET_SCRATCH0(r13)
323         EXCEPTION_PROLOG_0(PACA_EXGEN)
324         b       h_data_storage_hv
325
326         . = 0xe20
327 hv_instr_storage_trampoline:
328         SET_SCRATCH0(r13)
329         EXCEPTION_PROLOG_0(PACA_EXGEN)
330         b       h_instr_storage_hv
331
332         . = 0xe40
333 emulation_assist_trampoline:
334         SET_SCRATCH0(r13)
335         EXCEPTION_PROLOG_0(PACA_EXGEN)
336         b       emulation_assist_hv
337
338         . = 0xe60
339 hv_exception_trampoline:
340         SET_SCRATCH0(r13)
341         EXCEPTION_PROLOG_0(PACA_EXGEN)
342         b       hmi_exception_hv
343
344         . = 0xe80
345 hv_doorbell_trampoline:
346         SET_SCRATCH0(r13)
347         EXCEPTION_PROLOG_0(PACA_EXGEN)
348         b       h_doorbell_hv
349
350         /* We need to deal with the Altivec unavailable exception
351          * here which is at 0xf20, thus in the middle of the
352          * prolog code of the PerformanceMonitor one. A little
353          * trickery is thus necessary
354          */
355         . = 0xf00
356 performance_monitor_pseries_trampoline:
357         SET_SCRATCH0(r13)
358         EXCEPTION_PROLOG_0(PACA_EXGEN)
359         b       performance_monitor_pSeries
360
361         . = 0xf20
362 altivec_unavailable_pseries_trampoline:
363         SET_SCRATCH0(r13)
364         EXCEPTION_PROLOG_0(PACA_EXGEN)
365         b       altivec_unavailable_pSeries
366
367         . = 0xf40
368 vsx_unavailable_pseries_trampoline:
369         SET_SCRATCH0(r13)
370         EXCEPTION_PROLOG_0(PACA_EXGEN)
371         b       vsx_unavailable_pSeries
372
373         . = 0xf60
374 facility_unavailable_trampoline:
375         SET_SCRATCH0(r13)
376         EXCEPTION_PROLOG_0(PACA_EXGEN)
377         b       facility_unavailable_pSeries
378
379         . = 0xf80
380 hv_facility_unavailable_trampoline:
381         SET_SCRATCH0(r13)
382         EXCEPTION_PROLOG_0(PACA_EXGEN)
383         b       facility_unavailable_hv
384
385 #ifdef CONFIG_CBE_RAS
386         STD_EXCEPTION_HV(0x1200, 0x1202, cbe_system_error)
387         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1202)
388 #endif /* CONFIG_CBE_RAS */
389
390         STD_EXCEPTION_PSERIES(0x1300, 0x1300, instruction_breakpoint)
391         KVM_HANDLER_PR_SKIP(PACA_EXGEN, EXC_STD, 0x1300)
392
393         . = 0x1500
394         .global denorm_exception_hv
395 denorm_exception_hv:
396         HMT_MEDIUM_PPR_DISCARD
397         mtspr   SPRN_SPRG_HSCRATCH0,r13
398         EXCEPTION_PROLOG_0(PACA_EXGEN)
399         EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0x1500)
400
401 #ifdef CONFIG_PPC_DENORMALISATION
402         mfspr   r10,SPRN_HSRR1
403         mfspr   r11,SPRN_HSRR0          /* save HSRR0 */
404         andis.  r10,r10,(HSRR1_DENORM)@h /* denorm? */
405         addi    r11,r11,-4              /* HSRR0 is next instruction */
406         bne+    denorm_assist
407 #endif
408
409         KVMTEST(0x1500)
410         EXCEPTION_PROLOG_PSERIES_1(denorm_common, EXC_HV)
411         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x1500)
412
413 #ifdef CONFIG_CBE_RAS
414         STD_EXCEPTION_HV(0x1600, 0x1602, cbe_maintenance)
415         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1602)
416 #endif /* CONFIG_CBE_RAS */
417
418         STD_EXCEPTION_PSERIES(0x1700, 0x1700, altivec_assist)
419         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x1700)
420
421 #ifdef CONFIG_CBE_RAS
422         STD_EXCEPTION_HV(0x1800, 0x1802, cbe_thermal)
423         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0x1802)
424 #else
425         . = 0x1800
426 #endif /* CONFIG_CBE_RAS */
427
428
429 /*** Out of line interrupts support ***/
430
431         .align  7
432         /* moved from 0x200 */
433 machine_check_pSeries_early:
434 BEGIN_FTR_SECTION
435         EXCEPTION_PROLOG_1(PACA_EXMC, NOTEST, 0x200)
436         /*
437          * Register contents:
438          * R13          = PACA
439          * R9           = CR
440          * Original R9 to R13 is saved on PACA_EXMC
441          *
442          * Switch to mc_emergency stack and handle re-entrancy (though we
443          * currently don't test for overflow). Save MCE registers srr1,
444          * srr0, dar and dsisr and then set ME=1
445          *
446          * We use paca->in_mce to check whether this is the first entry or
447          * nested machine check. We increment paca->in_mce to track nested
448          * machine checks.
449          *
450          * If this is the first entry then set stack pointer to
451          * paca->mc_emergency_sp, otherwise r1 is already pointing to
452          * stack frame on mc_emergency stack.
453          *
454          * NOTE: We are here with MSR_ME=0 (off), which means we risk a
455          * checkstop if we get another machine check exception before we do
456          * rfid with MSR_ME=1.
457          */
458         mr      r11,r1                  /* Save r1 */
459         lhz     r10,PACA_IN_MCE(r13)
460         cmpwi   r10,0                   /* Are we in nested machine check */
461         bne     0f                      /* Yes, we are. */
462         /* First machine check entry */
463         ld      r1,PACAMCEMERGSP(r13)   /* Use MC emergency stack */
464 0:      subi    r1,r1,INT_FRAME_SIZE    /* alloc stack frame */
465         addi    r10,r10,1               /* increment paca->in_mce */
466         sth     r10,PACA_IN_MCE(r13)
467         std     r11,GPR1(r1)            /* Save r1 on the stack. */
468         std     r11,0(r1)               /* make stack chain pointer */
469         mfspr   r11,SPRN_SRR0           /* Save SRR0 */
470         std     r11,_NIP(r1)
471         mfspr   r11,SPRN_SRR1           /* Save SRR1 */
472         std     r11,_MSR(r1)
473         mfspr   r11,SPRN_DAR            /* Save DAR */
474         std     r11,_DAR(r1)
475         mfspr   r11,SPRN_DSISR          /* Save DSISR */
476         std     r11,_DSISR(r1)
477         std     r9,_CCR(r1)             /* Save CR in stackframe */
478         /* Save r9 through r13 from EXMC save area to stack frame. */
479         EXCEPTION_PROLOG_COMMON_2(PACA_EXMC)
480         mfmsr   r11                     /* get MSR value */
481         ori     r11,r11,MSR_ME          /* turn on ME bit */
482         ori     r11,r11,MSR_RI          /* turn on RI bit */
483         ld      r12,PACAKBASE(r13)      /* get high part of &label */
484         LOAD_HANDLER(r12, machine_check_handle_early)
485         mtspr   SPRN_SRR0,r12
486         mtspr   SPRN_SRR1,r11
487         rfid
488         b       .       /* prevent speculative execution */
489 END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
490
491 machine_check_pSeries:
492         .globl machine_check_fwnmi
493 machine_check_fwnmi:
494         HMT_MEDIUM_PPR_DISCARD
495         SET_SCRATCH0(r13)               /* save r13 */
496         EXCEPTION_PROLOG_0(PACA_EXMC)
497 machine_check_pSeries_0:
498         EXCEPTION_PROLOG_1(PACA_EXMC, KVMTEST, 0x200)
499         EXCEPTION_PROLOG_PSERIES_1(machine_check_common, EXC_STD)
500         KVM_HANDLER_SKIP(PACA_EXMC, EXC_STD, 0x200)
501
502         /* moved from 0x300 */
503 data_access_check_stab:
504         GET_PACA(r13)
505         std     r9,PACA_EXSLB+EX_R9(r13)
506         std     r10,PACA_EXSLB+EX_R10(r13)
507         mfspr   r10,SPRN_DAR
508         mfspr   r9,SPRN_DSISR
509         srdi    r10,r10,60
510         rlwimi  r10,r9,16,0x20
511 #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
512         lbz     r9,HSTATE_IN_GUEST(r13)
513         rlwimi  r10,r9,8,0x300
514 #endif
515         mfcr    r9
516         cmpwi   r10,0x2c
517         beq     do_stab_bolted_pSeries
518         mtcrf   0x80,r9
519         ld      r9,PACA_EXSLB+EX_R9(r13)
520         ld      r10,PACA_EXSLB+EX_R10(r13)
521         b       data_access_not_stab
522 do_stab_bolted_pSeries:
523         std     r11,PACA_EXSLB+EX_R11(r13)
524         std     r12,PACA_EXSLB+EX_R12(r13)
525         GET_SCRATCH0(r10)
526         std     r10,PACA_EXSLB+EX_R13(r13)
527         EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted, EXC_STD)
528
529         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_STD, 0x300)
530         KVM_HANDLER_SKIP(PACA_EXSLB, EXC_STD, 0x380)
531         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x400)
532         KVM_HANDLER_PR(PACA_EXSLB, EXC_STD, 0x480)
533         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x900)
534         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0x982)
535
536 #ifdef CONFIG_PPC_DENORMALISATION
537 denorm_assist:
538 BEGIN_FTR_SECTION
539 /*
540  * To denormalise we need to move a copy of the register to itself.
541  * For POWER6 do that here for all FP regs.
542  */
543         mfmsr   r10
544         ori     r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
545         xori    r10,r10,(MSR_FE0|MSR_FE1)
546         mtmsrd  r10
547         sync
548
549 #define FMR2(n)  fmr (n), (n) ; fmr n+1, n+1
550 #define FMR4(n)  FMR2(n) ; FMR2(n+2)
551 #define FMR8(n)  FMR4(n) ; FMR4(n+4)
552 #define FMR16(n) FMR8(n) ; FMR8(n+8)
553 #define FMR32(n) FMR16(n) ; FMR16(n+16)
554         FMR32(0)
555
556 FTR_SECTION_ELSE
557 /*
558  * To denormalise we need to move a copy of the register to itself.
559  * For POWER7 do that here for the first 32 VSX registers only.
560  */
561         mfmsr   r10
562         oris    r10,r10,MSR_VSX@h
563         mtmsrd  r10
564         sync
565
566 #define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
567 #define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
568 #define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
569 #define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
570 #define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
571         XVCPSGNDP32(0)
572
573 ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
574
575 BEGIN_FTR_SECTION
576         b       denorm_done
577 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
578 /*
579  * To denormalise we need to move a copy of the register to itself.
580  * For POWER8 we need to do that for all 64 VSX registers
581  */
582         XVCPSGNDP32(32)
583 denorm_done:
584         mtspr   SPRN_HSRR0,r11
585         mtcrf   0x80,r9
586         ld      r9,PACA_EXGEN+EX_R9(r13)
587         RESTORE_PPR_PACA(PACA_EXGEN, r10)
588 BEGIN_FTR_SECTION
589         ld      r10,PACA_EXGEN+EX_CFAR(r13)
590         mtspr   SPRN_CFAR,r10
591 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
592         ld      r10,PACA_EXGEN+EX_R10(r13)
593         ld      r11,PACA_EXGEN+EX_R11(r13)
594         ld      r12,PACA_EXGEN+EX_R12(r13)
595         ld      r13,PACA_EXGEN+EX_R13(r13)
596         HRFID
597         b       .
598 #endif
599
600         .align  7
601         /* moved from 0xe00 */
602         STD_EXCEPTION_HV_OOL(0xe02, h_data_storage)
603         KVM_HANDLER_SKIP(PACA_EXGEN, EXC_HV, 0xe02)
604         STD_EXCEPTION_HV_OOL(0xe22, h_instr_storage)
605         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe22)
606         STD_EXCEPTION_HV_OOL(0xe42, emulation_assist)
607         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe42)
608         STD_EXCEPTION_HV_OOL(0xe62, hmi_exception) /* need to flush cache ? */
609         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe62)
610         MASKABLE_EXCEPTION_HV_OOL(0xe82, h_doorbell)
611         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xe82)
612
613         /* moved from 0xf00 */
614         STD_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
615         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf00)
616         STD_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
617         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf20)
618         STD_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
619         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40)
620         STD_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
621         KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf60)
622         STD_EXCEPTION_HV_OOL(0xf82, facility_unavailable)
623         KVM_HANDLER(PACA_EXGEN, EXC_HV, 0xf82)
624
625 /*
626  * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
627  * - If it was a decrementer interrupt, we bump the dec to max and and return.
628  * - If it was a doorbell we return immediately since doorbells are edge
629  *   triggered and won't automatically refire.
630  * - else we hard disable and return.
631  * This is called with r10 containing the value to OR to the paca field.
632  */
633 #define MASKED_INTERRUPT(_H)                            \
634 masked_##_H##interrupt:                                 \
635         std     r11,PACA_EXGEN+EX_R11(r13);             \
636         lbz     r11,PACAIRQHAPPENED(r13);               \
637         or      r11,r11,r10;                            \
638         stb     r11,PACAIRQHAPPENED(r13);               \
639         cmpwi   r10,PACA_IRQ_DEC;                       \
640         bne     1f;                                     \
641         lis     r10,0x7fff;                             \
642         ori     r10,r10,0xffff;                         \
643         mtspr   SPRN_DEC,r10;                           \
644         b       2f;                                     \
645 1:      cmpwi   r10,PACA_IRQ_DBELL;                     \
646         beq     2f;                                     \
647         mfspr   r10,SPRN_##_H##SRR1;                    \
648         rldicl  r10,r10,48,1; /* clear MSR_EE */        \
649         rotldi  r10,r10,16;                             \
650         mtspr   SPRN_##_H##SRR1,r10;                    \
651 2:      mtcrf   0x80,r9;                                \
652         ld      r9,PACA_EXGEN+EX_R9(r13);               \
653         ld      r10,PACA_EXGEN+EX_R10(r13);             \
654         ld      r11,PACA_EXGEN+EX_R11(r13);             \
655         GET_SCRATCH0(r13);                              \
656         ##_H##rfid;                                     \
657         b       .
658         
659         MASKED_INTERRUPT()
660         MASKED_INTERRUPT(H)
661
662 /*
663  * Called from arch_local_irq_enable when an interrupt needs
664  * to be resent. r3 contains 0x500, 0x900, 0xa00 or 0xe80 to indicate
665  * which kind of interrupt. MSR:EE is already off. We generate a
666  * stackframe like if a real interrupt had happened.
667  *
668  * Note: While MSR:EE is off, we need to make sure that _MSR
669  * in the generated frame has EE set to 1 or the exception
670  * handler will not properly re-enable them.
671  */
672 _GLOBAL(__replay_interrupt)
673         /* We are going to jump to the exception common code which
674          * will retrieve various register values from the PACA which
675          * we don't give a damn about, so we don't bother storing them.
676          */
677         mfmsr   r12
678         mflr    r11
679         mfcr    r9
680         ori     r12,r12,MSR_EE
681         cmpwi   r3,0x900
682         beq     decrementer_common
683         cmpwi   r3,0x500
684         beq     hardware_interrupt_common
685 BEGIN_FTR_SECTION
686         cmpwi   r3,0xe80
687         beq     h_doorbell_common
688 FTR_SECTION_ELSE
689         cmpwi   r3,0xa00
690         beq     doorbell_super_common
691 ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
692         blr
693
694 #ifdef CONFIG_PPC_PSERIES
695 /*
696  * Vectors for the FWNMI option.  Share common code.
697  */
698         .globl system_reset_fwnmi
699       .align 7
700 system_reset_fwnmi:
701         HMT_MEDIUM_PPR_DISCARD
702         SET_SCRATCH0(r13)               /* save r13 */
703         EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
704                                  NOTEST, 0x100)
705
706 #endif /* CONFIG_PPC_PSERIES */
707
708 #ifdef __DISABLED__
709 /*
710  * This is used for when the SLB miss handler has to go virtual,
711  * which doesn't happen for now anymore but will once we re-implement
712  * dynamic VSIDs for shared page tables
713  */
714 slb_miss_user_pseries:
715         std     r10,PACA_EXGEN+EX_R10(r13)
716         std     r11,PACA_EXGEN+EX_R11(r13)
717         std     r12,PACA_EXGEN+EX_R12(r13)
718         GET_SCRATCH0(r10)
719         ld      r11,PACA_EXSLB+EX_R9(r13)
720         ld      r12,PACA_EXSLB+EX_R3(r13)
721         std     r10,PACA_EXGEN+EX_R13(r13)
722         std     r11,PACA_EXGEN+EX_R9(r13)
723         std     r12,PACA_EXGEN+EX_R3(r13)
724         clrrdi  r12,r13,32
725         mfmsr   r10
726         mfspr   r11,SRR0                        /* save SRR0 */
727         ori     r12,r12,slb_miss_user_common@l  /* virt addr of handler */
728         ori     r10,r10,MSR_IR|MSR_DR|MSR_RI
729         mtspr   SRR0,r12
730         mfspr   r12,SRR1                        /* and SRR1 */
731         mtspr   SRR1,r10
732         rfid
733         b       .                               /* prevent spec. execution */
734 #endif /* __DISABLED__ */
735
736 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
737 kvmppc_skip_interrupt:
738         /*
739          * Here all GPRs are unchanged from when the interrupt happened
740          * except for r13, which is saved in SPRG_SCRATCH0.
741          */
742         mfspr   r13, SPRN_SRR0
743         addi    r13, r13, 4
744         mtspr   SPRN_SRR0, r13
745         GET_SCRATCH0(r13)
746         rfid
747         b       .
748
749 kvmppc_skip_Hinterrupt:
750         /*
751          * Here all GPRs are unchanged from when the interrupt happened
752          * except for r13, which is saved in SPRG_SCRATCH0.
753          */
754         mfspr   r13, SPRN_HSRR0
755         addi    r13, r13, 4
756         mtspr   SPRN_HSRR0, r13
757         GET_SCRATCH0(r13)
758         hrfid
759         b       .
760 #endif
761
762 /*
763  * Code from here down to __end_handlers is invoked from the
764  * exception prologs above.  Because the prologs assemble the
765  * addresses of these handlers using the LOAD_HANDLER macro,
766  * which uses an ori instruction, these handlers must be in
767  * the first 64k of the kernel image.
768  */
769
770 /*** Common interrupt handlers ***/
771
772         STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
773
774         STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
775         STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
776         STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
777 #ifdef CONFIG_PPC_DOORBELL
778         STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception)
779 #else
780         STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception)
781 #endif
782         STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
783         STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
784         STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
785         STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
786         STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
787 #ifdef CONFIG_PPC_DOORBELL
788         STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception)
789 #else
790         STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception)
791 #endif
792         STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
793         STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
794         STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
795 #ifdef CONFIG_ALTIVEC
796         STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
797 #else
798         STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
799 #endif
800 #ifdef CONFIG_CBE_RAS
801         STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
802         STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
803         STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
804 #endif /* CONFIG_CBE_RAS */
805
806         /*
807          * Relocation-on interrupts: A subset of the interrupts can be delivered
808          * with IR=1/DR=1, if AIL==2 and MSR.HV won't be changed by delivering
809          * it.  Addresses are the same as the original interrupt addresses, but
810          * offset by 0xc000000000004000.
811          * It's impossible to receive interrupts below 0x300 via this mechanism.
812          * KVM: None of these traps are from the guest ; anything that escalated
813          * to HV=1 from HV=0 is delivered via real mode handlers.
814          */
815
816         /*
817          * This uses the standard macro, since the original 0x300 vector
818          * only has extra guff for STAB-based processors -- which never
819          * come here.
820          */
821         STD_RELON_EXCEPTION_PSERIES(0x4300, 0x300, data_access)
822         . = 0x4380
823         .globl data_access_slb_relon_pSeries
824 data_access_slb_relon_pSeries:
825         SET_SCRATCH0(r13)
826         EXCEPTION_PROLOG_0(PACA_EXSLB)
827         EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x380)
828         std     r3,PACA_EXSLB+EX_R3(r13)
829         mfspr   r3,SPRN_DAR
830         mfspr   r12,SPRN_SRR1
831 #ifndef CONFIG_RELOCATABLE
832         b       .slb_miss_realmode
833 #else
834         /*
835          * We can't just use a direct branch to .slb_miss_realmode
836          * because the distance from here to there depends on where
837          * the kernel ends up being put.
838          */
839         mfctr   r11
840         ld      r10,PACAKBASE(r13)
841         LOAD_HANDLER(r10, .slb_miss_realmode)
842         mtctr   r10
843         bctr
844 #endif
845
846         STD_RELON_EXCEPTION_PSERIES(0x4400, 0x400, instruction_access)
847         . = 0x4480
848         .globl instruction_access_slb_relon_pSeries
849 instruction_access_slb_relon_pSeries:
850         SET_SCRATCH0(r13)
851         EXCEPTION_PROLOG_0(PACA_EXSLB)
852         EXCEPTION_PROLOG_1(PACA_EXSLB, NOTEST, 0x480)
853         std     r3,PACA_EXSLB+EX_R3(r13)
854         mfspr   r3,SPRN_SRR0            /* SRR0 is faulting address */
855         mfspr   r12,SPRN_SRR1
856 #ifndef CONFIG_RELOCATABLE
857         b       .slb_miss_realmode
858 #else
859         mfctr   r11
860         ld      r10,PACAKBASE(r13)
861         LOAD_HANDLER(r10, .slb_miss_realmode)
862         mtctr   r10
863         bctr
864 #endif
865
866         . = 0x4500
867         .globl hardware_interrupt_relon_pSeries;
868         .globl hardware_interrupt_relon_hv;
869 hardware_interrupt_relon_pSeries:
870 hardware_interrupt_relon_hv:
871         BEGIN_FTR_SECTION
872                 _MASKABLE_RELON_EXCEPTION_PSERIES(0x502, hardware_interrupt, EXC_HV, SOFTEN_TEST_HV)
873         FTR_SECTION_ELSE
874                 _MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt, EXC_STD, SOFTEN_TEST_PR)
875         ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
876         STD_RELON_EXCEPTION_PSERIES(0x4600, 0x600, alignment)
877         STD_RELON_EXCEPTION_PSERIES(0x4700, 0x700, program_check)
878         STD_RELON_EXCEPTION_PSERIES(0x4800, 0x800, fp_unavailable)
879         MASKABLE_RELON_EXCEPTION_PSERIES(0x4900, 0x900, decrementer)
880         STD_RELON_EXCEPTION_HV(0x4980, 0x982, hdecrementer)
881         MASKABLE_RELON_EXCEPTION_PSERIES(0x4a00, 0xa00, doorbell_super)
882         STD_RELON_EXCEPTION_PSERIES(0x4b00, 0xb00, trap_0b)
883
884         . = 0x4c00
885         .globl system_call_relon_pSeries
886 system_call_relon_pSeries:
887         HMT_MEDIUM
888         SYSCALL_PSERIES_1
889         SYSCALL_PSERIES_2_DIRECT
890         SYSCALL_PSERIES_3
891
892         STD_RELON_EXCEPTION_PSERIES(0x4d00, 0xd00, single_step)
893
894         . = 0x4e00
895         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
896
897         . = 0x4e20
898         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
899
900         . = 0x4e40
901 emulation_assist_relon_trampoline:
902         SET_SCRATCH0(r13)
903         EXCEPTION_PROLOG_0(PACA_EXGEN)
904         b       emulation_assist_relon_hv
905
906         . = 0x4e60
907         b       .       /* Can't happen, see v2.07 Book III-S section 6.5 */
908
909         . = 0x4e80
910 h_doorbell_relon_trampoline:
911         SET_SCRATCH0(r13)
912         EXCEPTION_PROLOG_0(PACA_EXGEN)
913         b       h_doorbell_relon_hv
914
915         . = 0x4f00
916 performance_monitor_relon_pseries_trampoline:
917         SET_SCRATCH0(r13)
918         EXCEPTION_PROLOG_0(PACA_EXGEN)
919         b       performance_monitor_relon_pSeries
920
921         . = 0x4f20
922 altivec_unavailable_relon_pseries_trampoline:
923         SET_SCRATCH0(r13)
924         EXCEPTION_PROLOG_0(PACA_EXGEN)
925         b       altivec_unavailable_relon_pSeries
926
927         . = 0x4f40
928 vsx_unavailable_relon_pseries_trampoline:
929         SET_SCRATCH0(r13)
930         EXCEPTION_PROLOG_0(PACA_EXGEN)
931         b       vsx_unavailable_relon_pSeries
932
933         . = 0x4f60
934 facility_unavailable_relon_trampoline:
935         SET_SCRATCH0(r13)
936         EXCEPTION_PROLOG_0(PACA_EXGEN)
937         b       facility_unavailable_relon_pSeries
938
939         . = 0x4f80
940 hv_facility_unavailable_relon_trampoline:
941         SET_SCRATCH0(r13)
942         EXCEPTION_PROLOG_0(PACA_EXGEN)
943         b       hv_facility_unavailable_relon_hv
944
945         STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
946 #ifdef CONFIG_PPC_DENORMALISATION
947         . = 0x5500
948         b       denorm_exception_hv
949 #endif
950         STD_RELON_EXCEPTION_PSERIES(0x5700, 0x1700, altivec_assist)
951
952         /* Other future vectors */
953         .align  7
954         .globl  __end_interrupts
955 __end_interrupts:
956
957         .align  7
958 system_call_entry_direct:
959 #if defined(CONFIG_RELOCATABLE)
960         /* The first level prologue may have used LR to get here, saving
961          * orig in r10.  To save hacking/ifdeffing common code, restore here.
962          */
963         mtlr    r10
964 #endif
965 system_call_entry:
966         b       system_call_common
967
968 ppc64_runlatch_on_trampoline:
969         b       .__ppc64_runlatch_on
970
971 /*
972  * Here we have detected that the kernel stack pointer is bad.
973  * R9 contains the saved CR, r13 points to the paca,
974  * r10 contains the (bad) kernel stack pointer,
975  * r11 and r12 contain the saved SRR0 and SRR1.
976  * We switch to using an emergency stack, save the registers there,
977  * and call kernel_bad_stack(), which panics.
978  */
979 bad_stack:
980         ld      r1,PACAEMERGSP(r13)
981         subi    r1,r1,64+INT_FRAME_SIZE
982         std     r9,_CCR(r1)
983         std     r10,GPR1(r1)
984         std     r11,_NIP(r1)
985         std     r12,_MSR(r1)
986         mfspr   r11,SPRN_DAR
987         mfspr   r12,SPRN_DSISR
988         std     r11,_DAR(r1)
989         std     r12,_DSISR(r1)
990         mflr    r10
991         mfctr   r11
992         mfxer   r12
993         std     r10,_LINK(r1)
994         std     r11,_CTR(r1)
995         std     r12,_XER(r1)
996         SAVE_GPR(0,r1)
997         SAVE_GPR(2,r1)
998         ld      r10,EX_R3(r3)
999         std     r10,GPR3(r1)
1000         SAVE_GPR(4,r1)
1001         SAVE_4GPRS(5,r1)
1002         ld      r9,EX_R9(r3)
1003         ld      r10,EX_R10(r3)
1004         SAVE_2GPRS(9,r1)
1005         ld      r9,EX_R11(r3)
1006         ld      r10,EX_R12(r3)
1007         ld      r11,EX_R13(r3)
1008         std     r9,GPR11(r1)
1009         std     r10,GPR12(r1)
1010         std     r11,GPR13(r1)
1011 BEGIN_FTR_SECTION
1012         ld      r10,EX_CFAR(r3)
1013         std     r10,ORIG_GPR3(r1)
1014 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
1015         SAVE_8GPRS(14,r1)
1016         SAVE_10GPRS(22,r1)
1017         lhz     r12,PACA_TRAP_SAVE(r13)
1018         std     r12,_TRAP(r1)
1019         addi    r11,r1,INT_FRAME_SIZE
1020         std     r11,0(r1)
1021         li      r12,0
1022         std     r12,0(r11)
1023         ld      r2,PACATOC(r13)
1024         ld      r11,exception_marker@toc(r2)
1025         std     r12,RESULT(r1)
1026         std     r11,STACK_FRAME_OVERHEAD-16(r1)
1027 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1028         bl      .kernel_bad_stack
1029         b       1b
1030
1031 /*
1032  * Here r13 points to the paca, r9 contains the saved CR,
1033  * SRR0 and SRR1 are saved in r11 and r12,
1034  * r9 - r13 are saved in paca->exgen.
1035  */
1036         .align  7
1037         .globl data_access_common
1038 data_access_common:
1039         mfspr   r10,SPRN_DAR
1040         std     r10,PACA_EXGEN+EX_DAR(r13)
1041         mfspr   r10,SPRN_DSISR
1042         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1043         EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN)
1044         DISABLE_INTS
1045         ld      r12,_MSR(r1)
1046         ld      r3,PACA_EXGEN+EX_DAR(r13)
1047         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
1048         li      r5,0x300
1049         b       .do_hash_page           /* Try to handle as hpte fault */
1050
1051         .align  7
1052         .globl  h_data_storage_common
1053 h_data_storage_common:
1054         mfspr   r10,SPRN_HDAR
1055         std     r10,PACA_EXGEN+EX_DAR(r13)
1056         mfspr   r10,SPRN_HDSISR
1057         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1058         EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN)
1059         bl      .save_nvgprs
1060         DISABLE_INTS
1061         addi    r3,r1,STACK_FRAME_OVERHEAD
1062         bl      .unknown_exception
1063         b       .ret_from_except
1064
1065         .align  7
1066         .globl instruction_access_common
1067 instruction_access_common:
1068         EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN)
1069         DISABLE_INTS
1070         ld      r12,_MSR(r1)
1071         ld      r3,_NIP(r1)
1072         andis.  r4,r12,0x5820
1073         li      r5,0x400
1074         b       .do_hash_page           /* Try to handle as hpte fault */
1075
1076         STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
1077
1078 /*
1079  * Here is the common SLB miss user that is used when going to virtual
1080  * mode for SLB misses, that is currently not used
1081  */
1082 #ifdef __DISABLED__
1083         .align  7
1084         .globl  slb_miss_user_common
1085 slb_miss_user_common:
1086         mflr    r10
1087         std     r3,PACA_EXGEN+EX_DAR(r13)
1088         stw     r9,PACA_EXGEN+EX_CCR(r13)
1089         std     r10,PACA_EXGEN+EX_LR(r13)
1090         std     r11,PACA_EXGEN+EX_SRR0(r13)
1091         bl      .slb_allocate_user
1092
1093         ld      r10,PACA_EXGEN+EX_LR(r13)
1094         ld      r3,PACA_EXGEN+EX_R3(r13)
1095         lwz     r9,PACA_EXGEN+EX_CCR(r13)
1096         ld      r11,PACA_EXGEN+EX_SRR0(r13)
1097         mtlr    r10
1098         beq-    slb_miss_fault
1099
1100         andi.   r10,r12,MSR_RI          /* check for unrecoverable exception */
1101         beq-    unrecov_user_slb
1102         mfmsr   r10
1103
1104 .machine push
1105 .machine "power4"
1106         mtcrf   0x80,r9
1107 .machine pop
1108
1109         clrrdi  r10,r10,2               /* clear RI before setting SRR0/1 */
1110         mtmsrd  r10,1
1111
1112         mtspr   SRR0,r11
1113         mtspr   SRR1,r12
1114
1115         ld      r9,PACA_EXGEN+EX_R9(r13)
1116         ld      r10,PACA_EXGEN+EX_R10(r13)
1117         ld      r11,PACA_EXGEN+EX_R11(r13)
1118         ld      r12,PACA_EXGEN+EX_R12(r13)
1119         ld      r13,PACA_EXGEN+EX_R13(r13)
1120         rfid
1121         b       .
1122
1123 slb_miss_fault:
1124         EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
1125         ld      r4,PACA_EXGEN+EX_DAR(r13)
1126         li      r5,0
1127         std     r4,_DAR(r1)
1128         std     r5,_DSISR(r1)
1129         b       handle_page_fault
1130
1131 unrecov_user_slb:
1132         EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
1133         DISABLE_INTS
1134         bl      .save_nvgprs
1135 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1136         bl      .unrecoverable_exception
1137         b       1b
1138
1139 #endif /* __DISABLED__ */
1140
1141
1142         /*
1143          * Machine check is different because we use a different
1144          * save area: PACA_EXMC instead of PACA_EXGEN.
1145          */
1146         .align  7
1147         .globl machine_check_common
1148 machine_check_common:
1149
1150         mfspr   r10,SPRN_DAR
1151         std     r10,PACA_EXGEN+EX_DAR(r13)
1152         mfspr   r10,SPRN_DSISR
1153         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1154         EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC)
1155         FINISH_NAP
1156         DISABLE_INTS
1157         ld      r3,PACA_EXGEN+EX_DAR(r13)
1158         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
1159         std     r3,_DAR(r1)
1160         std     r4,_DSISR(r1)
1161         bl      .save_nvgprs
1162         addi    r3,r1,STACK_FRAME_OVERHEAD
1163         bl      .machine_check_exception
1164         b       .ret_from_except
1165
1166         .align  7
1167         .globl alignment_common
1168 alignment_common:
1169         mfspr   r10,SPRN_DAR
1170         std     r10,PACA_EXGEN+EX_DAR(r13)
1171         mfspr   r10,SPRN_DSISR
1172         stw     r10,PACA_EXGEN+EX_DSISR(r13)
1173         EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN)
1174         ld      r3,PACA_EXGEN+EX_DAR(r13)
1175         lwz     r4,PACA_EXGEN+EX_DSISR(r13)
1176         std     r3,_DAR(r1)
1177         std     r4,_DSISR(r1)
1178         bl      .save_nvgprs
1179         DISABLE_INTS
1180         addi    r3,r1,STACK_FRAME_OVERHEAD
1181         bl      .alignment_exception
1182         b       .ret_from_except
1183
1184         .align  7
1185         .globl program_check_common
1186 program_check_common:
1187         EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN)
1188         bl      .save_nvgprs
1189         DISABLE_INTS
1190         addi    r3,r1,STACK_FRAME_OVERHEAD
1191         bl      .program_check_exception
1192         b       .ret_from_except
1193
1194         .align  7
1195         .globl fp_unavailable_common
1196 fp_unavailable_common:
1197         EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN)
1198         bne     1f                      /* if from user, just load it up */
1199         bl      .save_nvgprs
1200         DISABLE_INTS
1201         addi    r3,r1,STACK_FRAME_OVERHEAD
1202         bl      .kernel_fp_unavailable_exception
1203         BUG_OPCODE
1204 1:
1205 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1206 BEGIN_FTR_SECTION
1207         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1208          * transaction), go do TM stuff
1209          */
1210         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1211         bne-    2f
1212 END_FTR_SECTION_IFSET(CPU_FTR_TM)
1213 #endif
1214         bl      .load_up_fpu
1215         b       fast_exception_return
1216 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1217 2:      /* User process was in a transaction */
1218         bl      .save_nvgprs
1219         DISABLE_INTS
1220         addi    r3,r1,STACK_FRAME_OVERHEAD
1221         bl      .fp_unavailable_tm
1222         b       .ret_from_except
1223 #endif
1224         .align  7
1225         .globl altivec_unavailable_common
1226 altivec_unavailable_common:
1227         EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
1228 #ifdef CONFIG_ALTIVEC
1229 BEGIN_FTR_SECTION
1230         beq     1f
1231 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1232   BEGIN_FTR_SECTION_NESTED(69)
1233         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1234          * transaction), go do TM stuff
1235          */
1236         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1237         bne-    2f
1238   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
1239 #endif
1240         bl      .load_up_altivec
1241         b       fast_exception_return
1242 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1243 2:      /* User process was in a transaction */
1244         bl      .save_nvgprs
1245         DISABLE_INTS
1246         addi    r3,r1,STACK_FRAME_OVERHEAD
1247         bl      .altivec_unavailable_tm
1248         b       .ret_from_except
1249 #endif
1250 1:
1251 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
1252 #endif
1253         bl      .save_nvgprs
1254         DISABLE_INTS
1255         addi    r3,r1,STACK_FRAME_OVERHEAD
1256         bl      .altivec_unavailable_exception
1257         b       .ret_from_except
1258
1259         .align  7
1260         .globl vsx_unavailable_common
1261 vsx_unavailable_common:
1262         EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
1263 #ifdef CONFIG_VSX
1264 BEGIN_FTR_SECTION
1265         beq     1f
1266 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1267   BEGIN_FTR_SECTION_NESTED(69)
1268         /* Test if 2 TM state bits are zero.  If non-zero (ie. userspace was in
1269          * transaction), go do TM stuff
1270          */
1271         rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
1272         bne-    2f
1273   END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
1274 #endif
1275         b       .load_up_vsx
1276 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
1277 2:      /* User process was in a transaction */
1278         bl      .save_nvgprs
1279         DISABLE_INTS
1280         addi    r3,r1,STACK_FRAME_OVERHEAD
1281         bl      .vsx_unavailable_tm
1282         b       .ret_from_except
1283 #endif
1284 1:
1285 END_FTR_SECTION_IFSET(CPU_FTR_VSX)
1286 #endif
1287         bl      .save_nvgprs
1288         DISABLE_INTS
1289         addi    r3,r1,STACK_FRAME_OVERHEAD
1290         bl      .vsx_unavailable_exception
1291         b       .ret_from_except
1292
1293         STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
1294         STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
1295
1296         .align  7
1297         .globl  __end_handlers
1298 __end_handlers:
1299
1300         /* Equivalents to the above handlers for relocation-on interrupt vectors */
1301         STD_RELON_EXCEPTION_HV_OOL(0xe40, emulation_assist)
1302         MASKABLE_RELON_EXCEPTION_HV_OOL(0xe80, h_doorbell)
1303
1304         STD_RELON_EXCEPTION_PSERIES_OOL(0xf00, performance_monitor)
1305         STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
1306         STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
1307         STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
1308         STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
1309
1310 #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
1311 /*
1312  * Data area reserved for FWNMI option.
1313  * This address (0x7000) is fixed by the RPA.
1314  */
1315         .= 0x7000
1316         .globl fwnmi_data_area
1317 fwnmi_data_area:
1318
1319         /* pseries and powernv need to keep the whole page from
1320          * 0x7000 to 0x8000 free for use by the firmware
1321          */
1322         . = 0x8000
1323 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
1324
1325 /* Space for CPU0's segment table */
1326         .balign 4096
1327         .globl initial_stab
1328 initial_stab:
1329         .space  4096
1330
1331 #ifdef CONFIG_PPC_POWERNV
1332 _GLOBAL(opal_mc_secondary_handler)
1333         HMT_MEDIUM_PPR_DISCARD
1334         SET_SCRATCH0(r13)
1335         GET_PACA(r13)
1336         clrldi  r3,r3,2
1337         tovirt(r3,r3)
1338         std     r3,PACA_OPAL_MC_EVT(r13)
1339         ld      r13,OPAL_MC_SRR0(r3)
1340         mtspr   SPRN_SRR0,r13
1341         ld      r13,OPAL_MC_SRR1(r3)
1342         mtspr   SPRN_SRR1,r13
1343         ld      r3,OPAL_MC_GPR3(r3)
1344         GET_SCRATCH0(r13)
1345         b       machine_check_pSeries
1346 #endif /* CONFIG_PPC_POWERNV */
1347
1348
1349 #define MACHINE_CHECK_HANDLER_WINDUP                    \
1350         /* Clear MSR_RI before setting SRR0 and SRR1. */\
1351         li      r0,MSR_RI;                              \
1352         mfmsr   r9;             /* get MSR value */     \
1353         andc    r9,r9,r0;                               \
1354         mtmsrd  r9,1;           /* Clear MSR_RI */      \
1355         /* Move original SRR0 and SRR1 into the respective regs */      \
1356         ld      r9,_MSR(r1);                            \
1357         mtspr   SPRN_SRR1,r9;                           \
1358         ld      r3,_NIP(r1);                            \
1359         mtspr   SPRN_SRR0,r3;                           \
1360         ld      r9,_CTR(r1);                            \
1361         mtctr   r9;                                     \
1362         ld      r9,_XER(r1);                            \
1363         mtxer   r9;                                     \
1364         ld      r9,_LINK(r1);                           \
1365         mtlr    r9;                                     \
1366         REST_GPR(0, r1);                                \
1367         REST_8GPRS(2, r1);                              \
1368         REST_GPR(10, r1);                               \
1369         ld      r11,_CCR(r1);                           \
1370         mtcr    r11;                                    \
1371         /* Decrement paca->in_mce. */                   \
1372         lhz     r12,PACA_IN_MCE(r13);                   \
1373         subi    r12,r12,1;                              \
1374         sth     r12,PACA_IN_MCE(r13);                   \
1375         REST_GPR(11, r1);                               \
1376         REST_2GPRS(12, r1);                             \
1377         /* restore original r1. */                      \
1378         ld      r1,GPR1(r1)
1379
1380         /*
1381          * Handle machine check early in real mode. We come here with
1382          * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
1383          */
1384         .align  7
1385         .globl machine_check_handle_early
1386 machine_check_handle_early:
1387         std     r0,GPR0(r1)     /* Save r0 */
1388         EXCEPTION_PROLOG_COMMON_3(0x200)
1389         bl      .save_nvgprs
1390         addi    r3,r1,STACK_FRAME_OVERHEAD
1391         bl      .machine_check_early
1392         ld      r12,_MSR(r1)
1393 #ifdef  CONFIG_PPC_P7_NAP
1394         /*
1395          * Check if thread was in power saving mode. We come here when any
1396          * of the following is true:
1397          * a. thread wasn't in power saving mode
1398          * b. thread was in power saving mode with no state loss or
1399          *    supervisor state loss
1400          *
1401          * Go back to nap again if (b) is true.
1402          */
1403         rlwinm. r11,r12,47-31,30,31     /* Was it in power saving mode? */
1404         beq     4f                      /* No, it wasn;t */
1405         /* Thread was in power saving mode. Go back to nap again. */
1406         cmpwi   r11,2
1407         bne     3f
1408         /* Supervisor state loss */
1409         li      r0,1
1410         stb     r0,PACA_NAPSTATELOST(r13)
1411 3:      bl      .machine_check_queue_event
1412         MACHINE_CHECK_HANDLER_WINDUP
1413         GET_PACA(r13)
1414         ld      r1,PACAR1(r13)
1415         b       .power7_enter_nap_mode
1416 4:
1417 #endif
1418         /*
1419          * Check if we are coming from hypervisor userspace. If yes then we
1420          * continue in host kernel in V mode to deliver the MC event.
1421          */
1422         rldicl. r11,r12,4,63            /* See if MC hit while in HV mode. */
1423         beq     5f
1424         andi.   r11,r12,MSR_PR          /* See if coming from user. */
1425         bne     9f                      /* continue in V mode if we are. */
1426
1427 5:
1428 #ifdef CONFIG_KVM_BOOK3S_64_HV
1429         /*
1430          * We are coming from kernel context. Check if we are coming from
1431          * guest. if yes, then we can continue. We will fall through
1432          * do_kvm_200->kvmppc_interrupt to deliver the MC event to guest.
1433          */
1434         lbz     r11,HSTATE_IN_GUEST(r13)
1435         cmpwi   r11,0                   /* Check if coming from guest */
1436         bne     9f                      /* continue if we are. */
1437 #endif
1438         /*
1439          * At this point we are not sure about what context we come from.
1440          * Queue up the MCE event and return from the interrupt.
1441          * But before that, check if this is an un-recoverable exception.
1442          * If yes, then stay on emergency stack and panic.
1443          */
1444         andi.   r11,r12,MSR_RI
1445         bne     2f
1446 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1447         bl      .unrecoverable_exception
1448         b       1b
1449 2:
1450         /*
1451          * Return from MC interrupt.
1452          * Queue up the MCE event so that we can log it later, while
1453          * returning from kernel or opal call.
1454          */
1455         bl      .machine_check_queue_event
1456         MACHINE_CHECK_HANDLER_WINDUP
1457         rfid
1458 9:
1459         /* Deliver the machine check to host kernel in V mode. */
1460         MACHINE_CHECK_HANDLER_WINDUP
1461         b       machine_check_pSeries
1462
1463 /*
1464  * r13 points to the PACA, r9 contains the saved CR,
1465  * r12 contain the saved SRR1, SRR0 is still ready for return
1466  * r3 has the faulting address
1467  * r9 - r13 are saved in paca->exslb.
1468  * r3 is saved in paca->slb_r3
1469  * We assume we aren't going to take any exceptions during this procedure.
1470  */
1471 _GLOBAL(slb_miss_realmode)
1472         mflr    r10
1473 #ifdef CONFIG_RELOCATABLE
1474         mtctr   r11
1475 #endif
1476
1477         stw     r9,PACA_EXSLB+EX_CCR(r13)       /* save CR in exc. frame */
1478         std     r10,PACA_EXSLB+EX_LR(r13)       /* save LR */
1479
1480         bl      .slb_allocate_realmode
1481
1482         /* All done -- return from exception. */
1483
1484         ld      r10,PACA_EXSLB+EX_LR(r13)
1485         ld      r3,PACA_EXSLB+EX_R3(r13)
1486         lwz     r9,PACA_EXSLB+EX_CCR(r13)       /* get saved CR */
1487
1488         mtlr    r10
1489
1490         andi.   r10,r12,MSR_RI  /* check for unrecoverable exception */
1491         beq-    2f
1492
1493 .machine        push
1494 .machine        "power4"
1495         mtcrf   0x80,r9
1496         mtcrf   0x01,r9         /* slb_allocate uses cr0 and cr7 */
1497 .machine        pop
1498
1499         RESTORE_PPR_PACA(PACA_EXSLB, r9)
1500         ld      r9,PACA_EXSLB+EX_R9(r13)
1501         ld      r10,PACA_EXSLB+EX_R10(r13)
1502         ld      r11,PACA_EXSLB+EX_R11(r13)
1503         ld      r12,PACA_EXSLB+EX_R12(r13)
1504         ld      r13,PACA_EXSLB+EX_R13(r13)
1505         rfid
1506         b       .       /* prevent speculative execution */
1507
1508 2:      mfspr   r11,SPRN_SRR0
1509         ld      r10,PACAKBASE(r13)
1510         LOAD_HANDLER(r10,unrecov_slb)
1511         mtspr   SPRN_SRR0,r10
1512         ld      r10,PACAKMSR(r13)
1513         mtspr   SPRN_SRR1,r10
1514         rfid
1515         b       .
1516
1517 unrecov_slb:
1518         EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
1519         DISABLE_INTS
1520         bl      .save_nvgprs
1521 1:      addi    r3,r1,STACK_FRAME_OVERHEAD
1522         bl      .unrecoverable_exception
1523         b       1b
1524
1525
1526 #ifdef CONFIG_PPC_970_NAP
1527 power4_fixup_nap:
1528         andc    r9,r9,r10
1529         std     r9,TI_LOCAL_FLAGS(r11)
1530         ld      r10,_LINK(r1)           /* make idle task do the */
1531         std     r10,_NIP(r1)            /* equivalent of a blr */
1532         blr
1533 #endif
1534
1535 /*
1536  * Hash table stuff
1537  */
1538         .align  7
1539 _STATIC(do_hash_page)
1540         std     r3,_DAR(r1)
1541         std     r4,_DSISR(r1)
1542
1543         andis.  r0,r4,0xa410            /* weird error? */
1544         bne-    handle_page_fault       /* if not, try to insert a HPTE */
1545         andis.  r0,r4,DSISR_DABRMATCH@h
1546         bne-    handle_dabr_fault
1547
1548 BEGIN_FTR_SECTION
1549         andis.  r0,r4,0x0020            /* Is it a segment table fault? */
1550         bne-    do_ste_alloc            /* If so handle it */
1551 END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
1552
1553         CURRENT_THREAD_INFO(r11, r1)
1554         lwz     r0,TI_PREEMPT(r11)      /* If we're in an "NMI" */
1555         andis.  r0,r0,NMI_MASK@h        /* (i.e. an irq when soft-disabled) */
1556         bne     77f                     /* then don't call hash_page now */
1557         /*
1558          * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
1559          * accessing a userspace segment (even from the kernel). We assume
1560          * kernel addresses always have the high bit set.
1561          */
1562         rlwinm  r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */
1563         rotldi  r0,r3,15                /* Move high bit into MSR_PR posn */
1564         orc     r0,r12,r0               /* MSR_PR | ~high_bit */
1565         rlwimi  r4,r0,32-13,30,30       /* becomes _PAGE_USER access bit */
1566         ori     r4,r4,1                 /* add _PAGE_PRESENT */
1567         rlwimi  r4,r5,22+2,31-2,31-2    /* Set _PAGE_EXEC if trap is 0x400 */
1568
1569         /*
1570          * r3 contains the faulting address
1571          * r4 contains the required access permissions
1572          * r5 contains the trap number
1573          *
1574          * at return r3 = 0 for success, 1 for page fault, negative for error
1575          */
1576         bl      .hash_page              /* build HPTE if possible */
1577         cmpdi   r3,0                    /* see if hash_page succeeded */
1578
1579         /* Success */
1580         beq     fast_exc_return_irq     /* Return from exception on success */
1581
1582         /* Error */
1583         blt-    13f
1584
1585 /* Here we have a page fault that hash_page can't handle. */
1586 handle_page_fault:
1587 11:     ld      r4,_DAR(r1)
1588         ld      r5,_DSISR(r1)
1589         addi    r3,r1,STACK_FRAME_OVERHEAD
1590         bl      .do_page_fault
1591         cmpdi   r3,0
1592         beq+    12f
1593         bl      .save_nvgprs
1594         mr      r5,r3
1595         addi    r3,r1,STACK_FRAME_OVERHEAD
1596         lwz     r4,_DAR(r1)
1597         bl      .bad_page_fault
1598         b       .ret_from_except
1599
1600 /* We have a data breakpoint exception - handle it */
1601 handle_dabr_fault:
1602         bl      .save_nvgprs
1603         ld      r4,_DAR(r1)
1604         ld      r5,_DSISR(r1)
1605         addi    r3,r1,STACK_FRAME_OVERHEAD
1606         bl      .do_break
1607 12:     b       .ret_from_except_lite
1608
1609
1610 /* We have a page fault that hash_page could handle but HV refused
1611  * the PTE insertion
1612  */
1613 13:     bl      .save_nvgprs
1614         mr      r5,r3
1615         addi    r3,r1,STACK_FRAME_OVERHEAD
1616         ld      r4,_DAR(r1)
1617         bl      .low_hash_fault
1618         b       .ret_from_except
1619
1620 /*
1621  * We come here as a result of a DSI at a point where we don't want
1622  * to call hash_page, such as when we are accessing memory (possibly
1623  * user memory) inside a PMU interrupt that occurred while interrupts
1624  * were soft-disabled.  We want to invoke the exception handler for
1625  * the access, or panic if there isn't a handler.
1626  */
1627 77:     bl      .save_nvgprs
1628         mr      r4,r3
1629         addi    r3,r1,STACK_FRAME_OVERHEAD
1630         li      r5,SIGSEGV
1631         bl      .bad_page_fault
1632         b       .ret_from_except
1633
1634         /* here we have a segment miss */
1635 do_ste_alloc:
1636         bl      .ste_allocate           /* try to insert stab entry */
1637         cmpdi   r3,0
1638         bne-    handle_page_fault
1639         b       fast_exception_return
1640
1641 /*
1642  * r13 points to the PACA, r9 contains the saved CR,
1643  * r11 and r12 contain the saved SRR0 and SRR1.
1644  * r9 - r13 are saved in paca->exslb.
1645  * We assume we aren't going to take any exceptions during this procedure.
1646  * We assume (DAR >> 60) == 0xc.
1647  */
1648         .align  7
1649 _GLOBAL(do_stab_bolted)
1650         stw     r9,PACA_EXSLB+EX_CCR(r13)       /* save CR in exc. frame */
1651         std     r11,PACA_EXSLB+EX_SRR0(r13)     /* save SRR0 in exc. frame */
1652         mfspr   r11,SPRN_DAR                    /* ea */
1653
1654         /*
1655          * check for bad kernel/user address
1656          * (ea & ~REGION_MASK) >= PGTABLE_RANGE
1657          */
1658         rldicr. r9,r11,4,(63 - 46 - 4)
1659         li      r9,0    /* VSID = 0 for bad address */
1660         bne-    0f
1661
1662         /*
1663          * Calculate VSID:
1664          * This is the kernel vsid, we take the top for context from
1665          * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
1666          * Here we know that (ea >> 60) == 0xc
1667          */
1668         lis     r9,(MAX_USER_CONTEXT + 1)@ha
1669         addi    r9,r9,(MAX_USER_CONTEXT + 1)@l
1670
1671         srdi    r10,r11,SID_SHIFT
1672         rldimi  r10,r9,ESID_BITS,0 /* proto vsid */
1673         ASM_VSID_SCRAMBLE(r10, r9, 256M)
1674         rldic   r9,r10,12,16    /* r9 = vsid << 12 */
1675
1676 0:
1677         /* Hash to the primary group */
1678         ld      r10,PACASTABVIRT(r13)
1679         srdi    r11,r11,SID_SHIFT
1680         rldimi  r10,r11,7,52    /* r10 = first ste of the group */
1681
1682         /* Search the primary group for a free entry */
1683 1:      ld      r11,0(r10)      /* Test valid bit of the current ste    */
1684         andi.   r11,r11,0x80
1685         beq     2f
1686         addi    r10,r10,16
1687         andi.   r11,r10,0x70
1688         bne     1b
1689
1690         /* Stick for only searching the primary group for now.          */
1691         /* At least for now, we use a very simple random castout scheme */
1692         /* Use the TB as a random number ;  OR in 1 to avoid entry 0    */
1693         mftb    r11
1694         rldic   r11,r11,4,57    /* r11 = (r11 << 4) & 0x70 */
1695         ori     r11,r11,0x10
1696
1697         /* r10 currently points to an ste one past the group of interest */
1698         /* make it point to the randomly selected entry                 */
1699         subi    r10,r10,128
1700         or      r10,r10,r11     /* r10 is the entry to invalidate       */
1701
1702         isync                   /* mark the entry invalid               */
1703         ld      r11,0(r10)
1704         rldicl  r11,r11,56,1    /* clear the valid bit */
1705         rotldi  r11,r11,8
1706         std     r11,0(r10)
1707         sync
1708
1709         clrrdi  r11,r11,28      /* Get the esid part of the ste         */
1710         slbie   r11
1711
1712 2:      std     r9,8(r10)       /* Store the vsid part of the ste       */
1713         eieio
1714
1715         mfspr   r11,SPRN_DAR            /* Get the new esid                     */
1716         clrrdi  r11,r11,28      /* Permits a full 32b of ESID           */
1717         ori     r11,r11,0x90    /* Turn on valid and kp                 */
1718         std     r11,0(r10)      /* Put new entry back into the stab     */
1719
1720         sync
1721
1722         /* All done -- return from exception. */
1723         lwz     r9,PACA_EXSLB+EX_CCR(r13)       /* get saved CR */
1724         ld      r11,PACA_EXSLB+EX_SRR0(r13)     /* get saved SRR0 */
1725
1726         andi.   r10,r12,MSR_RI
1727         beq-    unrecov_slb
1728
1729         mtcrf   0x80,r9                 /* restore CR */
1730
1731         mfmsr   r10
1732         clrrdi  r10,r10,2
1733         mtmsrd  r10,1
1734
1735         mtspr   SPRN_SRR0,r11
1736         mtspr   SPRN_SRR1,r12
1737         ld      r9,PACA_EXSLB+EX_R9(r13)
1738         ld      r10,PACA_EXSLB+EX_R10(r13)
1739         ld      r11,PACA_EXSLB+EX_R11(r13)
1740         ld      r12,PACA_EXSLB+EX_R12(r13)
1741         ld      r13,PACA_EXSLB+EX_R13(r13)
1742         rfid
1743         b       .       /* prevent speculative execution */