2 bool "Support for 47x variant"
7 This option enables support for the 47x family of processors and is
8 not currently compatible with other 44x or 46x varients
18 This option enables support for the IBM PPC440EP evaluation board.
28 This option enables support for the IBM PPC440GP evaluation board.
37 This option enables support for the ACube Sam440ep board.
46 This option enables support for the AMCC PPC440EPX evaluation board.
56 This option enables support for the AMCC PPC440GX "Taishan"
66 select PPC4xx_PCI_EXPRESS
68 This option enables support for the AMCC PPC440SPe evaluation board.
78 This option enables support for the AMCC PPC440GRX evaluation board.
86 This option enables support for the PIKA Warp(tm) Appliance. The Warp
87 is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP
90 See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
91 Telephony Developers" link for more information.
98 select 460EX # Odd since it uses 460GT but the effects are the same
100 select PPC4xx_PCI_EXPRESS
102 This option enables support for the AMCC Dual PPC460GT evaluation board.
111 select PPC4xx_PCI_EXPRESS
112 select IBM_NEW_EMAC_RGMII
113 select IBM_NEW_EMAC_ZMII
115 This option enables support for the AMCC PPC460EX evaluation board.
122 select 460EX # Odd since it uses 460GT but the effects are the same
124 select PPC4xx_PCI_EXPRESS
125 select IBM_NEW_EMAC_RGMII
126 select IBM_NEW_EMAC_ZMII
128 This option enables support for the AMCC PPC460GT evaluation board.
137 select PPC4xx_PCI_EXPRESS
139 This option enables support for the AMCC PPC460SX Redwood board.
148 select PPC4xx_PCI_EXPRESS
149 select IBM_NEW_EMAC_RGMII
151 This option enables support for the AMCC PPC460SX evaluation board.
161 This option enables support for the AMCC PPC440EP evaluation board.
164 bool "ISS 4xx Simulator"
165 depends on (44x || 40x)
168 select 440GP if 44x && !PPC_47x
172 This option enables support for the IBM ISS simulation environment
180 # This option enables support for the IBM PPC440SP evaluation board.
188 # This option enables support for the IBM PPC440GX evaluation board.
190 config XILINX_VIRTEX440_GENERIC_BOARD
191 bool "Generic Xilinx Virtex 5 FXT board support"
194 select XILINX_VIRTEX_5_FXT
196 This option enables generic support for Xilinx Virtex based boards
197 that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
199 The generic virtex board support matches any device tree which
200 specifies 'xlnx,virtex440' in its compatible field. This includes
201 the Xilinx ML5xx reference designs using the powerpc core.
203 Most Virtex 5 designs should use this unless it needs to do some
204 special configuration at board probe time.
207 bool "Xilinx ML510 extra support"
208 depends on XILINX_VIRTEX440_GENERIC_BOARD
209 select PPC_PCI_CHOICE
210 select XILINX_PCI if PCI
211 select PPC_INDIRECT_PCI if PCI
212 select PPC_I8259 if PCI
214 This option enables extra support for features on the Xilinx ML510
215 board. The ML510 has a PCI bus with ALI south bridge.
218 bool "Simple PowerPC 44x board support"
222 This option enables the simple PowerPC 44x platform support.
225 bool "PPC4xx GPIO support"
227 select ARCH_REQUIRE_GPIOLIB
230 Enable gpiolib support for ppc440 based boards
232 # 44x specific CPU modules, selected based on the board above.
236 select IBM440EP_ERR42
237 select IBM_NEW_EMAC_ZMII
238 select USB_ARCH_HAS_OHCI
243 select IBM_NEW_EMAC_EMAC4
244 select IBM_NEW_EMAC_RGMII
245 select IBM_NEW_EMAC_ZMII
249 select IBM_NEW_EMAC_EMAC4
250 select IBM_NEW_EMAC_RGMII
251 select IBM_NEW_EMAC_ZMII
255 select IBM_NEW_EMAC_ZMII
259 select IBM_NEW_EMAC_EMAC4
260 select IBM_NEW_EMAC_RGMII
261 select IBM_NEW_EMAC_ZMII #test only
262 select IBM_NEW_EMAC_TAH #test only
269 select IBM_NEW_EMAC_EMAC4
274 select IBM_NEW_EMAC_EMAC4
275 select IBM_NEW_EMAC_TAH
280 select IBM_NEW_EMAC_EMAC4
281 select IBM_NEW_EMAC_RGMII
282 select IBM_NEW_EMAC_ZMII
283 select IBM_NEW_EMAC_TAH
285 # 44x errata/workaround config symbols, selected by the CPU models above
286 config IBM440EP_ERR42
289 # Xilinx specific config options.
292 select DEFAULT_UIMAGE
294 # Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
295 config XILINX_VIRTEX_5_FXT