8 Select KATANA if configuring an Artesyn KATANA 750i or 3750
17 Select CPCI690 if configuring a Force CPCI690 cPCI board.
20 bool "Force-PowerPMC250"
23 bool "IBM 750FX Eval board or 750GX Eval board"
25 Select CHESTNUT if configuring an IBM 750FX Eval Board or a
30 select PPC_INDIRECT_PCI
35 Select HDPU if configuring a Sky Computers Compute Blade.
39 tristate "HDPU-Features"
41 Select to enable HDPU enhanced features.
44 bool "Marvell-EV64260BP"
46 Select EV64260 if configuring a Marvell (formerly Galileo)
47 EV64260BP Evaluation platform.
53 bool "Motorola-MVME5100"
54 select PPC_INDIRECT_PCI
57 bool "Motorola-PowerPlus"
58 select PPC_INDIRECT_PCI
61 bool "Motorola-PrPMC750"
62 select PPC_INDIRECT_PCI
65 bool "Motorola-PrPMC800"
66 select PPC_INDIRECT_PCI
69 bool "Motorola-Sandpoint"
71 Select SANDPOINT if configuring for a Motorola Sandpoint X3
75 bool "Radstone Technology PPC7D board"
82 select PPC_INDIRECT_PCI
85 Select Gemini if configuring for a Synergy Microsystems' Gemini
86 series Single Board Computer. More information is available at:
87 <http://www.synergymicro.com/PressRel/97_10_15.html>.
92 The EST8260 is a single-board computer manufactured by Wind River
93 Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
94 the MPC8260. Wind River Systems has a website at
95 <http://www.windriver.com/>, but the EST8260 cannot be found on it
96 and has probably been discontinued or rebadged.
101 SBC PowerQUICC II, single-board computer with MPC82xx CPU
102 Manufacturer: Wind River Systems, Inc.
103 Date of Release: May 2003
105 URL: <http://www.windriver.com/>
116 MPC8260 based module, little larger than credit card,
117 up to 128 MB global + 64 MB local RAM, 32 MB Flash,
118 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
119 2 x serial ports, ...
120 Manufacturer: TQ Components, www.tq-group.de
121 Date of Release: June 2001
122 End of Life: not yet :-)
123 URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
129 bool "Freescale-PQ2FADS"
131 Select PQ2FADS if you wish to configure for a Freescale
132 PQ2FADS board (-VR or -ZU).
135 bool "Freescale LITE5200 / (IceCube)"
138 Support for the LITE5200 dev board for the MPC5200 from Freescale.
139 This is for the LITE5200 version 2.0 board. Don't know if it changes
140 much but it's only been tested on this board version. I think this
141 board is also known as IceCube.
144 bool "Freescale MPC834x SYS"
146 This option enables support for the MPC 834x SYS evaluation board.
148 Be aware that PCI buses can only function when SYS board is plugged
149 into the PIB (Platform IO Board) board from Freescale which provide
150 3 PCI slots. The PIBs PCI initialization is the bootloader's
154 bool "Marvell-EV64360BP"
156 Select EV64360 if configuring a Marvell EV64360BP Evaluation
167 depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
174 bool "CPM2 Support" if WILLOW
176 default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
178 The MPC8260 is a typical embedded CPU made by Motorola. Selecting
179 this option means that you wish to build a kernel for a machine with
188 The MPC8272 CPM has a different internal dpram setup than other CPM2
193 default y if MPC834x_SYS
197 default y if MPC834x_SYS
201 depends on 8260 || MPC8560 || MPC8555
204 The CPM2 (Communications Processor Module) is a coprocessor on
205 embedded CPUs made by Motorola. Selecting this option means that
206 you wish to build a kernel for a machine with a CPM2 coprocessor
207 on it (826x, 827x, 8560).
211 depends on SANDPOINT || SPRUCE || PPLUS || \
212 PRPMC750 || PRPMC800 || LOPEC || \
213 (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
219 depends on 6xx && POWERPMC250
224 depends on EV64260 || CPCI690
227 config MV64360 # Really MV64360 & MV64460
229 depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
234 depends on (GT64260 || MV64360)
235 select PPC_INDIRECT_PCI
238 menu "Set bridge options"
241 config NOT_COHERENT_CACHE
242 bool "Turn off Cache Coherency"
245 Some 64x60 bridges lock up when trying to enforce cache coherency.
246 When this option is selected, cache coherency will be turned off.
247 Note that this can cause other problems (e.g., stale data being
248 speculatively loaded via a cached mapping). Use at your own risk.
251 hex "Set bridge base used by firmware"
254 A firmware can leave the base address of the bridge's registers at
255 a non-standard location. If so, set this value to reflect the
256 address of that non-standard location.
258 config MV64X60_NEW_BASE
259 hex "Set bridge base used by kernel"
262 If the current base address of the bridge's registers is not where
263 you want it, set this value to the address that you want it moved to.
267 config NONMONARCH_SUPPORT
268 bool "Enable Non-Monarch Support"
276 config EPIC_SERIAL_MODE
278 depends on 6xx && (LOPEC || SANDPOINT)
283 depends on POWERPMC250 || LOPEC || SANDPOINT
284 select PPC_INDIRECT_PCI
287 config MPC10X_OPENPIC
289 depends on POWERPMC250 || LOPEC || SANDPOINT
292 config MPC10X_STORE_GATHERING
293 bool "Enable MPC10x store gathering"
294 depends on MPC10X_BRIDGE
296 config SANDPOINT_ENABLE_UART1
297 bool "Enable DUART mode on Sandpoint"
300 If this option is enabled then the MPC824x processor will run
301 in DUART mode instead of UART mode.
303 config HARRIER_STORE_GATHERING
304 bool "Enable Harrier store gathering"
307 config MVME5100_IPMC761_PRESENT
308 bool "MVME5100 configured with an IPMC761"
311 config SPRUCE_BAUD_33M
312 bool "Spruce baud clock support"