]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/powerpc/platforms/powernv/smp.c
sched/headers: Prepare for new header dependencies before moving code to <linux/sched...
[karo-tx-linux.git] / arch / powerpc / platforms / powernv / smp.c
1 /*
2  * SMP support for PowerNV machines.
3  *
4  * Copyright 2011 IBM Corp.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version
9  * 2 of the License, or (at your option) any later version.
10  */
11
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/sched.h>
15 #include <linux/sched/hotplug.h>
16 #include <linux/smp.h>
17 #include <linux/interrupt.h>
18 #include <linux/delay.h>
19 #include <linux/init.h>
20 #include <linux/spinlock.h>
21 #include <linux/cpu.h>
22
23 #include <asm/irq.h>
24 #include <asm/smp.h>
25 #include <asm/paca.h>
26 #include <asm/machdep.h>
27 #include <asm/cputable.h>
28 #include <asm/firmware.h>
29 #include <asm/vdso_datapage.h>
30 #include <asm/cputhreads.h>
31 #include <asm/xics.h>
32 #include <asm/opal.h>
33 #include <asm/runlatch.h>
34 #include <asm/code-patching.h>
35 #include <asm/dbell.h>
36 #include <asm/kvm_ppc.h>
37 #include <asm/ppc-opcode.h>
38
39 #include "powernv.h"
40
41 #ifdef DEBUG
42 #include <asm/udbg.h>
43 #define DBG(fmt...) udbg_printf(fmt)
44 #else
45 #define DBG(fmt...)
46 #endif
47
48 static void pnv_smp_setup_cpu(int cpu)
49 {
50         if (cpu != boot_cpuid)
51                 xics_setup_cpu();
52
53 #ifdef CONFIG_PPC_DOORBELL
54         if (cpu_has_feature(CPU_FTR_DBELL))
55                 doorbell_setup_this_cpu();
56 #endif
57 }
58
59 static int pnv_smp_kick_cpu(int nr)
60 {
61         unsigned int pcpu = get_hard_smp_processor_id(nr);
62         unsigned long start_here =
63                         __pa(ppc_function_entry(generic_secondary_smp_init));
64         long rc;
65         uint8_t status;
66
67         BUG_ON(nr < 0 || nr >= NR_CPUS);
68
69         /*
70          * If we already started or OPAL is not supported, we just
71          * kick the CPU via the PACA
72          */
73         if (paca[nr].cpu_start || !firmware_has_feature(FW_FEATURE_OPAL))
74                 goto kick;
75
76         /*
77          * At this point, the CPU can either be spinning on the way in
78          * from kexec or be inside OPAL waiting to be started for the
79          * first time. OPAL v3 allows us to query OPAL to know if it
80          * has the CPUs, so we do that
81          */
82         rc = opal_query_cpu_status(pcpu, &status);
83         if (rc != OPAL_SUCCESS) {
84                 pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr);
85                 return -ENODEV;
86         }
87
88         /*
89          * Already started, just kick it, probably coming from
90          * kexec and spinning
91          */
92         if (status == OPAL_THREAD_STARTED)
93                 goto kick;
94
95         /*
96          * Available/inactive, let's kick it
97          */
98         if (status == OPAL_THREAD_INACTIVE) {
99                 pr_devel("OPAL: Starting CPU %d (HW 0x%x)...\n", nr, pcpu);
100                 rc = opal_start_cpu(pcpu, start_here);
101                 if (rc != OPAL_SUCCESS) {
102                         pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr);
103                         return -ENODEV;
104                 }
105         } else {
106                 /*
107                  * An unavailable CPU (or any other unknown status)
108                  * shouldn't be started. It should also
109                  * not be in the possible map but currently it can
110                  * happen
111                  */
112                 pr_devel("OPAL: CPU %d (HW 0x%x) is unavailable"
113                          " (status %d)...\n", nr, pcpu, status);
114                 return -ENODEV;
115         }
116
117 kick:
118         return smp_generic_kick_cpu(nr);
119 }
120
121 #ifdef CONFIG_HOTPLUG_CPU
122
123 static int pnv_smp_cpu_disable(void)
124 {
125         int cpu = smp_processor_id();
126
127         /* This is identical to pSeries... might consolidate by
128          * moving migrate_irqs_away to a ppc_md with default to
129          * the generic fixup_irqs. --BenH.
130          */
131         set_cpu_online(cpu, false);
132         vdso_data->processorCount--;
133         if (cpu == boot_cpuid)
134                 boot_cpuid = cpumask_any(cpu_online_mask);
135         xics_migrate_irqs_away();
136         return 0;
137 }
138
139 static void pnv_smp_cpu_kill_self(void)
140 {
141         unsigned int cpu;
142         unsigned long srr1, wmask;
143         u32 idle_states;
144
145         /* Standard hot unplug procedure */
146         local_irq_disable();
147         idle_task_exit();
148         current->active_mm = NULL; /* for sanity */
149         cpu = smp_processor_id();
150         DBG("CPU%d offline\n", cpu);
151         generic_set_cpu_dead(cpu);
152         smp_wmb();
153
154         wmask = SRR1_WAKEMASK;
155         if (cpu_has_feature(CPU_FTR_ARCH_207S))
156                 wmask = SRR1_WAKEMASK_P8;
157
158         idle_states = pnv_get_supported_cpuidle_states();
159
160         /* We don't want to take decrementer interrupts while we are offline,
161          * so clear LPCR:PECE1. We keep PECE2 (and LPCR_PECE_HVEE on P9)
162          * enabled as to let IPIs in.
163          */
164         mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
165
166         /*
167          * Hard-disable interrupts, and then clear irq_happened flags
168          * that we can safely ignore while off-line, since they
169          * are for things for which we do no processing when off-line
170          * (or in the case of HMI, all the processing we need to do
171          * is done in lower-level real-mode code).
172          */
173         hard_irq_disable();
174         local_paca->irq_happened &= ~(PACA_IRQ_DEC | PACA_IRQ_HMI);
175
176         while (!generic_check_cpu_restart(cpu)) {
177                 /*
178                  * Clear IPI flag, since we don't handle IPIs while
179                  * offline, except for those when changing micro-threading
180                  * mode, which are handled explicitly below, and those
181                  * for coming online, which are handled via
182                  * generic_check_cpu_restart() calls.
183                  */
184                 kvmppc_set_host_ipi(cpu, 0);
185
186                 ppc64_runlatch_off();
187
188                 if (cpu_has_feature(CPU_FTR_ARCH_300)) {
189                         srr1 = power9_idle_stop(pnv_deepest_stop_psscr_val,
190                                                 pnv_deepest_stop_psscr_mask);
191                 } else if (idle_states & OPAL_PM_WINKLE_ENABLED) {
192                         srr1 = power7_winkle();
193                 } else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
194                            (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
195                         srr1 = power7_sleep();
196                 } else {
197                         srr1 = power7_nap(1);
198                 }
199
200                 ppc64_runlatch_on();
201
202                 /*
203                  * If the SRR1 value indicates that we woke up due to
204                  * an external interrupt, then clear the interrupt.
205                  * We clear the interrupt before checking for the
206                  * reason, so as to avoid a race where we wake up for
207                  * some other reason, find nothing and clear the interrupt
208                  * just as some other cpu is sending us an interrupt.
209                  * If we returned from power7_nap as a result of
210                  * having finished executing in a KVM guest, then srr1
211                  * contains 0.
212                  */
213                 if (((srr1 & wmask) == SRR1_WAKEEE) ||
214                     ((srr1 & wmask) == SRR1_WAKEHVI) ||
215                     (local_paca->irq_happened & PACA_IRQ_EE)) {
216                         if (cpu_has_feature(CPU_FTR_ARCH_300))
217                                 icp_opal_flush_interrupt();
218                         else
219                                 icp_native_flush_interrupt();
220                 } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
221                         unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
222                         asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
223                 }
224                 local_paca->irq_happened &= ~(PACA_IRQ_EE | PACA_IRQ_DBELL);
225                 smp_mb();
226
227                 if (cpu_core_split_required())
228                         continue;
229
230                 if (srr1 && !generic_check_cpu_restart(cpu))
231                         DBG("CPU%d Unexpected exit while offline !\n", cpu);
232         }
233
234         /* Re-enable decrementer interrupts */
235         mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) | LPCR_PECE1);
236         DBG("CPU%d coming online...\n", cpu);
237 }
238
239 #endif /* CONFIG_HOTPLUG_CPU */
240
241 static int pnv_cpu_bootable(unsigned int nr)
242 {
243         /*
244          * Starting with POWER8, the subcore logic relies on all threads of a
245          * core being booted so that they can participate in split mode
246          * switches. So on those machines we ignore the smt_enabled_at_boot
247          * setting (smt-enabled on the kernel command line).
248          */
249         if (cpu_has_feature(CPU_FTR_ARCH_207S))
250                 return 1;
251
252         return smp_generic_cpu_bootable(nr);
253 }
254
255 static struct smp_ops_t pnv_smp_ops = {
256         .message_pass   = smp_muxed_ipi_message_pass,
257         .cause_ipi      = NULL, /* Filled at runtime by xics_smp_probe() */
258         .probe          = xics_smp_probe,
259         .kick_cpu       = pnv_smp_kick_cpu,
260         .setup_cpu      = pnv_smp_setup_cpu,
261         .cpu_bootable   = pnv_cpu_bootable,
262 #ifdef CONFIG_HOTPLUG_CPU
263         .cpu_disable    = pnv_smp_cpu_disable,
264         .cpu_die        = generic_cpu_die,
265 #endif /* CONFIG_HOTPLUG_CPU */
266 };
267
268 /* This is called very early during platform setup_arch */
269 void __init pnv_smp_init(void)
270 {
271         smp_ops = &pnv_smp_ops;
272
273 #ifdef CONFIG_HOTPLUG_CPU
274         ppc_md.cpu_die  = pnv_smp_cpu_kill_self;
275 #endif
276 }