3 select ARCH_MIGHT_HAVE_PC_PARPORT
6 select HAVE_IDE if HAS_IOPORT
8 select HAVE_MEMBLOCK_NODE_MAP
9 select ARCH_DISCARD_MEMBLOCK
11 select HAVE_GENERIC_DMA_COHERENT
12 select HAVE_ARCH_TRACEHOOK
13 select HAVE_DMA_API_DEBUG
15 select HAVE_PERF_EVENTS
16 select HAVE_DEBUG_BUGVERBOSE
17 select ARCH_HAVE_CUSTOM_GPIO_H
18 select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
19 select PERF_USE_VMALLOC
20 select HAVE_DEBUG_KMEMLEAK
21 select HAVE_KERNEL_GZIP
22 select HAVE_KERNEL_BZIP2
23 select HAVE_KERNEL_LZMA
25 select HAVE_KERNEL_LZO
27 select ARCH_WANT_IPC_PARSE_VERSION
28 select HAVE_SYSCALL_TRACEPOINTS
29 select HAVE_REGS_AND_STACK_ACCESS_API
30 select MAY_HAVE_SPARSE_IRQ
31 select IRQ_FORCED_THREADING
33 select GENERIC_ATOMIC64
34 select GENERIC_IRQ_SHOW
35 select GENERIC_SMP_IDLE_THREAD
36 select GENERIC_IDLE_POLL_SETUP
37 select GENERIC_CLOCKEVENTS
38 select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
39 select GENERIC_STRNCPY_FROM_USER
40 select GENERIC_STRNLEN_USER
41 select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER
42 select MODULES_USE_ELF_RELA
46 The SuperH is a RISC processor targeted for use in embedded systems
47 and consumer electronics; it was also used in the Sega Dreamcast
48 gaming console. The SuperH port has a home page at
49 <http://www.linux-sh.org/>.
54 select HAVE_KRETPROBES
55 select HAVE_IOREMAP_PROT if MMU && !X2TLB
56 select HAVE_FUNCTION_TRACER
57 select HAVE_FTRACE_MCOUNT_RECORD
58 select HAVE_DYNAMIC_FTRACE
59 select HAVE_FUNCTION_TRACE_MCOUNT_TEST
60 select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE
61 select ARCH_WANT_IPC_PARSE_VERSION
62 select HAVE_FUNCTION_GRAPH_TRACER
64 select HAVE_HW_BREAKPOINT
65 select HAVE_MIXED_BREAKPOINTS_REGS
67 select ARCH_HIBERNATION_POSSIBLE if MMU
69 select HAVE_CC_STACKPROTECTOR
72 def_bool ARCH = "sh64"
77 default "arch/sh/configs/shx3_defconfig" if SUPERH32
78 default "arch/sh/configs/cayman_defconfig" if SUPERH64
80 config RWSEM_GENERIC_SPINLOCK
83 config RWSEM_XCHGADD_ALGORITHM
88 depends on BUG && SUPERH32
94 config GENERIC_HWEIGHT
97 config GENERIC_CALIBRATE_DELAY
100 config GENERIC_LOCKBREAK
102 depends on SMP && PREEMPT
104 config ARCH_SUSPEND_POSSIBLE
107 config ARCH_HIBERNATION_POSSIBLE
110 config SYS_SUPPORTS_APM_EMULATION
112 select ARCH_SUSPEND_POSSIBLE
114 config SYS_SUPPORTS_HUGETLBFS
117 config SYS_SUPPORTS_SMP
120 config SYS_SUPPORTS_NUMA
123 config SYS_SUPPORTS_PCI
126 config SYS_SUPPORTS_CMT
129 config SYS_SUPPORTS_MTU2
132 config SYS_SUPPORTS_TMU
135 config STACKTRACE_SUPPORT
138 config LOCKDEP_SUPPORT
141 config HAVE_LATENCYTOP_SUPPORT
144 config ARCH_HAS_ILOG2_U32
147 config ARCH_HAS_ILOG2_U64
152 depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
153 !SH_HP6XX && !SH_SOLUTION_ENGINE
164 config DMA_NONCOHERENT
165 def_bool !DMA_COHERENT
167 config NEED_DMA_MAP_STATE
168 def_bool DMA_NONCOHERENT
170 config NEED_SG_DMA_LENGTH
173 source "init/Kconfig"
175 source "kernel/Kconfig.freezer"
188 select UNCACHED_MAPPING
192 select CPU_HAS_INTEVT
194 select SYS_SUPPORTS_TMU
198 select CPU_HAS_INTEVT
200 select CPU_HAS_FPU if !CPU_SH4AL_DSP
201 select SYS_SUPPORTS_TMU
202 select SYS_SUPPORTS_HUGETLBFS if MMU
216 select SYS_SUPPORTS_TMU
217 select SYS_SUPPORTS_HUGETLBFS if MMU
225 select SYS_SUPPORTS_SMP
226 select SYS_SUPPORTS_NUMA
230 select ARCH_SUSPEND_POSSIBLE
235 depends on CPU_SH4 || CPU_SH4A
242 prompt "Processor sub-type selection"
248 # SH-2 Processor Support
250 config CPU_SUBTYPE_SH7619
251 bool "Support SH7619 processor"
253 select SYS_SUPPORTS_CMT
255 # SH-2A Processor Support
257 config CPU_SUBTYPE_SH7201
258 bool "Support SH7201 processor"
261 select SYS_SUPPORTS_MTU2
263 config CPU_SUBTYPE_SH7203
264 bool "Support SH7203 processor"
267 select SYS_SUPPORTS_CMT
268 select SYS_SUPPORTS_MTU2
269 select ARCH_WANT_OPTIONAL_GPIOLIB
272 config CPU_SUBTYPE_SH7206
273 bool "Support SH7206 processor"
275 select SYS_SUPPORTS_CMT
276 select SYS_SUPPORTS_MTU2
278 config CPU_SUBTYPE_SH7263
279 bool "Support SH7263 processor"
282 select SYS_SUPPORTS_CMT
283 select SYS_SUPPORTS_MTU2
285 config CPU_SUBTYPE_SH7264
286 bool "Support SH7264 processor"
289 select SYS_SUPPORTS_CMT
290 select SYS_SUPPORTS_MTU2
293 config CPU_SUBTYPE_SH7269
294 bool "Support SH7269 processor"
297 select SYS_SUPPORTS_CMT
298 select SYS_SUPPORTS_MTU2
301 config CPU_SUBTYPE_MXG
302 bool "Support MX-G processor"
304 select SYS_SUPPORTS_MTU2
306 Select MX-G if running on an R8A03022BG part.
308 # SH-3 Processor Support
310 config CPU_SUBTYPE_SH7705
311 bool "Support SH7705 processor"
314 config CPU_SUBTYPE_SH7706
315 bool "Support SH7706 processor"
318 Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
320 config CPU_SUBTYPE_SH7707
321 bool "Support SH7707 processor"
324 Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
326 config CPU_SUBTYPE_SH7708
327 bool "Support SH7708 processor"
330 Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
331 if you have a 100 Mhz SH-3 HD6417708R CPU.
333 config CPU_SUBTYPE_SH7709
334 bool "Support SH7709 processor"
337 Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
339 config CPU_SUBTYPE_SH7710
340 bool "Support SH7710 processor"
344 Select SH7710 if you have a SH3-DSP SH7710 CPU.
346 config CPU_SUBTYPE_SH7712
347 bool "Support SH7712 processor"
351 Select SH7712 if you have a SH3-DSP SH7712 CPU.
353 config CPU_SUBTYPE_SH7720
354 bool "Support SH7720 processor"
357 select SYS_SUPPORTS_CMT
358 select ARCH_WANT_OPTIONAL_GPIOLIB
359 select USB_ARCH_HAS_OHCI
360 select USB_OHCI_SH if USB_OHCI_HCD
363 Select SH7720 if you have a SH3-DSP SH7720 CPU.
365 config CPU_SUBTYPE_SH7721
366 bool "Support SH7721 processor"
369 select SYS_SUPPORTS_CMT
370 select USB_ARCH_HAS_OHCI
371 select USB_OHCI_SH if USB_OHCI_HCD
373 Select SH7721 if you have a SH3-DSP SH7721 CPU.
375 # SH-4 Processor Support
377 config CPU_SUBTYPE_SH7750
378 bool "Support SH7750 processor"
381 Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
383 config CPU_SUBTYPE_SH7091
384 bool "Support SH7091 processor"
387 Select SH7091 if you have an SH-4 based Sega device (such as
388 the Dreamcast, Naomi, and Naomi 2).
390 config CPU_SUBTYPE_SH7750R
391 bool "Support SH7750R processor"
394 config CPU_SUBTYPE_SH7750S
395 bool "Support SH7750S processor"
398 config CPU_SUBTYPE_SH7751
399 bool "Support SH7751 processor"
402 Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
403 or if you have a HD6417751R CPU.
405 config CPU_SUBTYPE_SH7751R
406 bool "Support SH7751R processor"
409 config CPU_SUBTYPE_SH7760
410 bool "Support SH7760 processor"
413 config CPU_SUBTYPE_SH4_202
414 bool "Support SH4-202 processor"
417 # SH-4A Processor Support
419 config CPU_SUBTYPE_SH7723
420 bool "Support SH7723 processor"
424 select ARCH_SPARSEMEM_ENABLE
425 select SYS_SUPPORTS_CMT
426 select ARCH_WANT_OPTIONAL_GPIOLIB
429 Select SH7723 if you have an SH-MobileR2 CPU.
431 config CPU_SUBTYPE_SH7724
432 bool "Support SH7724 processor"
436 select ARCH_SPARSEMEM_ENABLE
437 select SYS_SUPPORTS_CMT
438 select ARCH_WANT_OPTIONAL_GPIOLIB
441 Select SH7724 if you have an SH-MobileR2R CPU.
443 config CPU_SUBTYPE_SH7734
444 bool "Support SH7734 processor"
447 select ARCH_WANT_OPTIONAL_GPIOLIB
448 select USB_ARCH_HAS_OHCI
449 select USB_ARCH_HAS_EHCI
452 Select SH7734 if you have a SH4A SH7734 CPU.
454 config CPU_SUBTYPE_SH7757
455 bool "Support SH7757 processor"
458 select ARCH_WANT_OPTIONAL_GPIOLIB
459 select USB_ARCH_HAS_OHCI
460 select USB_ARCH_HAS_EHCI
463 Select SH7757 if you have a SH4A SH7757 CPU.
465 config CPU_SUBTYPE_SH7763
466 bool "Support SH7763 processor"
468 select USB_ARCH_HAS_OHCI
469 select USB_OHCI_SH if USB_OHCI_HCD
471 Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
473 config CPU_SUBTYPE_SH7770
474 bool "Support SH7770 processor"
477 config CPU_SUBTYPE_SH7780
478 bool "Support SH7780 processor"
481 config CPU_SUBTYPE_SH7785
482 bool "Support SH7785 processor"
485 select ARCH_SPARSEMEM_ENABLE
486 select SYS_SUPPORTS_NUMA
487 select ARCH_WANT_OPTIONAL_GPIOLIB
490 config CPU_SUBTYPE_SH7786
491 bool "Support SH7786 processor"
494 select CPU_HAS_PTEAEX
495 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
496 select ARCH_WANT_OPTIONAL_GPIOLIB
497 select USB_ARCH_HAS_OHCI
498 select USB_OHCI_SH if USB_OHCI_HCD
499 select USB_ARCH_HAS_EHCI
500 select USB_EHCI_SH if USB_EHCI_HCD
503 config CPU_SUBTYPE_SHX3
504 bool "Support SH-X3 processor"
507 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
508 select ARCH_REQUIRE_GPIOLIB
511 # SH4AL-DSP Processor Support
513 config CPU_SUBTYPE_SH7343
514 bool "Support SH7343 processor"
517 select SYS_SUPPORTS_CMT
519 config CPU_SUBTYPE_SH7722
520 bool "Support SH7722 processor"
524 select ARCH_SPARSEMEM_ENABLE
525 select SYS_SUPPORTS_NUMA
526 select SYS_SUPPORTS_CMT
527 select ARCH_WANT_OPTIONAL_GPIOLIB
530 config CPU_SUBTYPE_SH7366
531 bool "Support SH7366 processor"
535 select ARCH_SPARSEMEM_ENABLE
536 select SYS_SUPPORTS_NUMA
537 select SYS_SUPPORTS_CMT
546 prompt "Processor sub-type selection"
548 # SH-5 Processor Support
550 config CPU_SUBTYPE_SH5_101
551 bool "Support SH5-101 processor"
554 config CPU_SUBTYPE_SH5_103
555 bool "Support SH5-103 processor"
562 source "arch/sh/mm/Kconfig"
564 source "arch/sh/Kconfig.cpu"
566 source "arch/sh/boards/Kconfig"
568 menu "Timer and clock configuration"
571 bool "TMU timer driver"
572 depends on SYS_SUPPORTS_TMU
575 This enables the build of the TMU timer driver.
578 bool "CMT timer driver"
579 depends on SYS_SUPPORTS_CMT
582 This enables build of the CMT timer driver.
585 bool "MTU2 timer driver"
586 depends on SYS_SUPPORTS_MTU2
589 This enables build of the MTU2 timer driver.
592 int "Peripheral clock frequency (in Hz)"
593 depends on SH_CLK_CPG_LEGACY
594 default "31250000" if CPU_SUBTYPE_SH7619
595 default "33333333" if CPU_SUBTYPE_SH7770 || \
596 CPU_SUBTYPE_SH7760 || \
597 CPU_SUBTYPE_SH7705 || \
598 CPU_SUBTYPE_SH7203 || \
599 CPU_SUBTYPE_SH7206 || \
600 CPU_SUBTYPE_SH7263 || \
602 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
603 default "66000000" if CPU_SUBTYPE_SH4_202
606 This option is used to specify the peripheral clock frequency.
607 This is necessary for determining the reference clock value on
608 platforms lacking an RTC.
613 config SH_CLK_CPG_LEGACY
614 depends on SH_CLK_CPG
615 def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
616 !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \
617 !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \
622 menu "CPU Frequency scaling"
623 source "drivers/cpufreq/Kconfig"
626 source "arch/sh/drivers/Kconfig"
630 menu "Kernel features"
632 source kernel/Kconfig.hz
635 bool "kexec system call (EXPERIMENTAL)"
636 depends on SUPERH32 && MMU
638 kexec is a system call that implements the ability to shutdown your
639 current kernel, and to start another kernel. It is like a reboot
640 but it is independent of the system firmware. And like a reboot
641 you can start any kernel with it, not just Linux.
643 The name comes from the similarity to the exec system call.
645 It is an ongoing process to be certain the hardware in a machine
646 is properly shutdown, so do not be surprised if this code does not
647 initially work for you. As of this writing the exact hardware
648 interface is strongly in flux, so no good recommendation can be
652 bool "kernel crash dumps (EXPERIMENTAL)"
653 depends on SUPERH32 && BROKEN_ON_SMP
655 Generate crash dump after being started by kexec.
656 This should be normally only set in special crash dump kernels
657 which are loaded in the main kernel with kexec-tools into
658 a specially reserved region and then later executed after
659 a crash by kdump/kexec. The crash dump kernel must be compiled
660 to a memory address not used by the main kernel using
663 For more details see Documentation/kdump/kdump.txt
666 bool "kexec jump (EXPERIMENTAL)"
667 depends on SUPERH32 && KEXEC && HIBERNATION
669 Jump between original kernel and kexeced kernel and invoke
672 config PHYSICAL_START
673 hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
676 This gives the physical address where the kernel is loaded
677 and is ordinarily the same as MEMORY_START.
679 Different values are primarily used in the case of kexec on panic
680 where the fail safe kernel needs to run at a different address
681 than the panic-ed kernel.
684 bool "Enable seccomp to safely compute untrusted bytecode"
687 This kernel feature is useful for number crunching applications
688 that may need to compute untrusted bytecode during their
689 execution. By using pipes or other transports made available to
690 the process as file descriptors supporting the read/write
691 syscalls, it's possible to isolate those applications in
692 their own address space using seccomp. Once seccomp is
693 enabled via prctl, it cannot be disabled and the task is only
694 allowed to execute a few safe syscalls defined by each seccomp
700 bool "Symmetric multi-processing support"
701 depends on SYS_SUPPORTS_SMP
703 This enables support for systems with more than one CPU. If you have
704 a system with only one CPU, say N. If you have a system with more
707 If you say N here, the kernel will run on uni- and multiprocessor
708 machines, but will use only one CPU of a multiprocessor machine. If
709 you say Y here, the kernel will run on many, but not all,
710 uniprocessor machines. On a uniprocessor machine, the kernel
711 will run faster if you say N here.
713 People using multiprocessor machines who say Y here should also say
714 Y to "Enhanced Real Time Clock Support", below.
716 See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
717 available at <http://www.tldp.org/docs.html#howto>.
719 If you don't know what to do here, say N.
722 int "Maximum number of CPUs (2-32)"
725 default "4" if CPU_SUBTYPE_SHX3
728 This allows you to specify the maximum number of CPUs which this
729 kernel will support. The maximum supported value is 32 and the
730 minimum value which makes sense is 2.
732 This is purely to save memory - each supported CPU adds
733 approximately eight kilobytes to the kernel image.
736 bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
739 Say Y here to experiment with turning CPUs off and on. CPUs
740 can be controlled through /sys/devices/system/cpu.
742 source "kernel/Kconfig.preempt"
746 depends on !SMP && SUPERH32
748 This enables support for gUSA (general UserSpace Atomicity).
749 This is the default implementation for both UP and non-ll/sc
750 CPUs, and is used by the libc, amongst others.
752 For additional information, design information can be found
753 in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
755 This should only be disabled for special cases where alternate
756 atomicity implementations exist.
759 bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)"
760 depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A)
762 Enabling this option will allow the kernel to implement some
763 atomic operations using a software implementation of load-locked/
764 store-conditional (LLSC). On machines which do not have hardware
765 LLSC, this should be more efficient than the other alternative of
766 disabling interrupts around the atomic sequence.
768 config HW_PERF_EVENTS
769 bool "Enable hardware performance counter support for perf events"
770 depends on PERF_EVENTS && CPU_HAS_PMU
773 Enable hardware performance counter support for perf events. If
774 disabled, perf events will use software events only.
776 source "drivers/sh/Kconfig"
782 config ZERO_PAGE_OFFSET
784 default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \
785 SH_7751_SOLUTION_ENGINE
786 default "0x00004000" if PAGE_SIZE_16KB || SH_SH03
787 default "0x00002000" if PAGE_SIZE_8KB
790 This sets the default offset of zero page.
792 config BOOT_LINK_OFFSET
794 default "0x00210000" if SH_SHMIN
795 default "0x00400000" if SH_CAYMAN
796 default "0x00810000" if SH_7780_SOLUTION_ENGINE
797 default "0x009e0000" if SH_TITAN
798 default "0x01800000" if SH_SDK7780
799 default "0x02000000" if SH_EDOSK7760
802 This option allows you to set the link address offset of the zImage.
803 This can be useful if you are on a board which has a small amount of
808 default "0x00001000" if PAGE_SIZE_4KB
809 default "0x00002000" if PAGE_SIZE_8KB
810 default "0x00004000" if PAGE_SIZE_16KB
811 default "0x00010000" if PAGE_SIZE_64KB
814 config ROMIMAGE_MMCIF
815 bool "Include MMCIF loader in romImage (EXPERIMENTAL)"
816 depends on CPU_SUBTYPE_SH7724
818 Say Y here to include experimental MMCIF loading code in
819 romImage. With this enabled it is possible to write the romImage
820 kernel image to an MMC card and boot the kernel straight from
821 the reset vector. At reset the processor Mask ROM will load the
822 first part of the romImage which in turn loads the rest the kernel
823 image to RAM using the MMCIF hardware block.
826 prompt "Kernel command line"
828 default CMDLINE_OVERWRITE
830 Setting this option allows the kernel command line arguments
833 config CMDLINE_OVERWRITE
834 bool "Overwrite bootloader kernel arguments"
836 Given string will overwrite any arguments passed in by
839 config CMDLINE_EXTEND
840 bool "Extend bootloader kernel arguments"
842 Given string will be concatenated with arguments passed in
848 string "Kernel command line arguments string"
849 depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND
850 default "console=ttySC1,115200"
857 tristate "SuperHyway Bus support"
858 depends on CPU_SUBTYPE_SH4_202
861 bool "Maple Bus support"
862 depends on SH_DREAMCAST
864 The Maple Bus is SEGA's serial communication bus for peripherals
865 on the Dreamcast. Without this bus support you won't be able to
866 get your Dreamcast keyboard etc to work, so most users
867 probably want to say 'Y' here, unless you are only using the
868 Dreamcast with a serial line terminal or a remote network
873 depends on SYS_SUPPORTS_PCI
875 select GENERIC_PCI_IOMAP
876 select NO_GENERIC_PCI_IOPORT_MAP
878 Find out whether you have a PCI motherboard. PCI is the name of a
879 bus system, i.e. the way the CPU talks to the other stuff inside
880 your box. If you have PCI, say Y, otherwise N.
885 source "drivers/pci/pcie/Kconfig"
887 source "drivers/pci/Kconfig"
889 source "drivers/pcmcia/Kconfig"
891 source "drivers/pci/hotplug/Kconfig"
895 menu "Executable file formats"
897 source "fs/Kconfig.binfmt"
901 menu "Power management options (EXPERIMENTAL)"
903 source "kernel/power/Kconfig"
905 source "drivers/cpuidle/Kconfig"
911 source "drivers/Kconfig"
915 source "arch/sh/Kconfig.debug"
917 source "security/Kconfig"
919 source "crypto/Kconfig"