2 * Copyright (C) 2009 Renesas Solutions Corp.
4 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mfd/sh_mobile_sdhi.h>
15 #include <linux/mmc/host.h>
16 #include <linux/mmc/sh_mmcif.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/gpio.h>
19 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/usb/r8a66597.h>
23 #include <linux/i2c.h>
24 #include <linux/i2c/tsc2007.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/sh_msiof.h>
27 #include <linux/spi/mmc_spi.h>
28 #include <linux/input.h>
29 #include <linux/input/sh_keysc.h>
30 #include <video/sh_mobile_lcdc.h>
31 #include <sound/sh_fsi.h>
32 #include <media/sh_mobile_ceu.h>
33 #include <media/tw9910.h>
34 #include <media/mt9t112.h>
35 #include <asm/heartbeat.h>
36 #include <asm/sh_eth.h>
37 #include <asm/clock.h>
38 #include <asm/suspend.h>
39 #include <cpu/sh7724.h>
42 * Address Interface BusWidth
43 *-----------------------------------------
44 * 0x0000_0000 uboot 16bit
45 * 0x0004_0000 Linux romImage 16bit
46 * 0x0014_0000 MTD for Linux 16bit
47 * 0x0400_0000 Internal I/O 16/32bit
48 * 0x0800_0000 DRAM 32bit
49 * 0x1800_0000 MFI 16bit
53 *------------------------------
54 * DS2[1] = FlashROM write protect ON : write protect
55 * OFF : No write protect
56 * DS2[2] = RMII / TS, SCIF ON : RMII
58 * DS2[3] = Camera / Video ON : Camera
60 * DS2[5] = NTSC_OUT Clock ON : On board OSC
62 * DS2[6-7] = MMC / SD ON-OFF : SD
67 static unsigned char led_pos[] = { 0, 1, 2, 3 };
69 static struct heartbeat_data heartbeat_data = {
74 static struct resource heartbeat_resource = {
75 .start = 0xA405012C, /* PTG */
76 .end = 0xA405012E - 1,
77 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
80 static struct platform_device heartbeat_device = {
84 .platform_data = &heartbeat_data,
87 .resource = &heartbeat_resource,
91 static struct mtd_partition nor_flash_partitions[] = {
93 .name = "boot loader",
95 .size = (5 * 1024 * 1024),
96 .mask_flags = MTD_WRITEABLE, /* force read-only */
99 .offset = MTDPART_OFS_APPEND,
100 .size = MTDPART_SIZ_FULL,
104 static struct physmap_flash_data nor_flash_data = {
106 .parts = nor_flash_partitions,
107 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
110 static struct resource nor_flash_resources[] = {
115 .flags = IORESOURCE_MEM,
119 static struct platform_device nor_flash_device = {
120 .name = "physmap-flash",
121 .resource = nor_flash_resources,
122 .num_resources = ARRAY_SIZE(nor_flash_resources),
124 .platform_data = &nor_flash_data,
129 #define SH_ETH_ADDR (0xA4600000)
130 static struct resource sh_eth_resources[] = {
132 .start = SH_ETH_ADDR,
133 .end = SH_ETH_ADDR + 0x1FC,
134 .flags = IORESOURCE_MEM,
138 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
142 static struct sh_eth_plat_data sh_eth_plat = {
143 .phy = 0x1f, /* SMSC LAN8700 */
144 .edmac_endian = EDMAC_LITTLE_ENDIAN,
145 .ether_link_active_low = 1
148 static struct platform_device sh_eth_device = {
152 .platform_data = &sh_eth_plat,
154 .num_resources = ARRAY_SIZE(sh_eth_resources),
155 .resource = sh_eth_resources,
157 .hwblk_id = HWBLK_ETHER,
162 static void usb0_port_power(int port, int power)
164 gpio_set_value(GPIO_PTB4, power);
167 static struct r8a66597_platdata usb0_host_data = {
169 .port_power = usb0_port_power,
172 static struct resource usb0_host_resources[] = {
175 .end = 0xa4d80124 - 1,
176 .flags = IORESOURCE_MEM,
181 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
185 static struct platform_device usb0_host_device = {
186 .name = "r8a66597_hcd",
189 .dma_mask = NULL, /* not use dma */
190 .coherent_dma_mask = 0xffffffff,
191 .platform_data = &usb0_host_data,
193 .num_resources = ARRAY_SIZE(usb0_host_resources),
194 .resource = usb0_host_resources,
197 /* USB1 host/function */
198 static void usb1_port_power(int port, int power)
200 gpio_set_value(GPIO_PTB5, power);
203 static struct r8a66597_platdata usb1_common_data = {
205 .port_power = usb1_port_power,
208 static struct resource usb1_common_resources[] = {
211 .end = 0xa4d90124 - 1,
212 .flags = IORESOURCE_MEM,
217 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
221 static struct platform_device usb1_common_device = {
222 /* .name will be added in arch_setup */
225 .dma_mask = NULL, /* not use dma */
226 .coherent_dma_mask = 0xffffffff,
227 .platform_data = &usb1_common_data,
229 .num_resources = ARRAY_SIZE(usb1_common_resources),
230 .resource = usb1_common_resources,
234 const static struct fb_videomode ecovec_lcd_modes[] = {
245 .sync = 0, /* hsync and vsync are active low */
249 const static struct fb_videomode ecovec_dvi_modes[] = {
260 .sync = 0, /* hsync and vsync are active low */
264 static struct sh_mobile_lcdc_info lcdc_info = {
266 .interface_type = RGB18,
267 .chan = LCDC_CHAN_MAINLCD,
269 .lcd_size_cfg = { /* 7.0 inch */
278 static struct resource lcdc_resources[] = {
283 .flags = IORESOURCE_MEM,
287 .flags = IORESOURCE_IRQ,
291 static struct platform_device lcdc_device = {
292 .name = "sh_mobile_lcdc_fb",
293 .num_resources = ARRAY_SIZE(lcdc_resources),
294 .resource = lcdc_resources,
296 .platform_data = &lcdc_info,
299 .hwblk_id = HWBLK_LCDC,
304 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
305 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
308 static struct resource ceu0_resources[] = {
313 .flags = IORESOURCE_MEM,
317 .flags = IORESOURCE_IRQ,
320 /* place holder for contiguous memory */
324 static struct platform_device ceu0_device = {
325 .name = "sh_mobile_ceu",
326 .id = 0, /* "ceu0" clock */
327 .num_resources = ARRAY_SIZE(ceu0_resources),
328 .resource = ceu0_resources,
330 .platform_data = &sh_mobile_ceu0_info,
333 .hwblk_id = HWBLK_CEU0,
338 static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
339 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
342 static struct resource ceu1_resources[] = {
347 .flags = IORESOURCE_MEM,
351 .flags = IORESOURCE_IRQ,
354 /* place holder for contiguous memory */
358 static struct platform_device ceu1_device = {
359 .name = "sh_mobile_ceu",
360 .id = 1, /* "ceu1" clock */
361 .num_resources = ARRAY_SIZE(ceu1_resources),
362 .resource = ceu1_resources,
364 .platform_data = &sh_mobile_ceu1_info,
367 .hwblk_id = HWBLK_CEU1,
372 static struct i2c_board_info i2c0_devices[] = {
374 I2C_BOARD_INFO("da7210", 0x1a),
378 static struct i2c_board_info i2c1_devices[] = {
380 I2C_BOARD_INFO("r2025sd", 0x32),
383 I2C_BOARD_INFO("lis3lv02d", 0x1c),
389 static struct sh_keysc_info keysc_info = {
390 .mode = SH_KEYSC_MODE_1,
394 .keycodes = { KEY_1, 0, 0, 0, 0,
399 KEY_6, 0, 0, 0, 0, },
402 static struct resource keysc_resources[] = {
407 .flags = IORESOURCE_MEM,
411 .flags = IORESOURCE_IRQ,
415 static struct platform_device keysc_device = {
417 .id = 0, /* keysc0 clock */
418 .num_resources = ARRAY_SIZE(keysc_resources),
419 .resource = keysc_resources,
421 .platform_data = &keysc_info,
424 .hwblk_id = HWBLK_KEYSC,
430 static int ts_get_pendown_state(void)
433 gpio_free(GPIO_FN_INTC_IRQ0);
434 gpio_request(GPIO_PTZ0, NULL);
435 gpio_direction_input(GPIO_PTZ0);
437 val = gpio_get_value(GPIO_PTZ0);
439 gpio_free(GPIO_PTZ0);
440 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
445 static int ts_init(void)
447 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
451 static struct tsc2007_platform_data tsc2007_info = {
454 .get_pendown_state = ts_get_pendown_state,
455 .init_platform_hw = ts_init,
458 static struct i2c_board_info ts_i2c_clients = {
459 I2C_BOARD_INFO("tsc2007", 0x48),
461 .platform_data = &tsc2007_info,
465 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
467 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
469 gpio_set_value(GPIO_PTB6, state);
472 static struct sh_mobile_sdhi_info sdhi0_info = {
473 .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
474 .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
475 .set_pwr = sdhi0_set_pwr,
476 .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
479 static struct resource sdhi0_resources[] = {
484 .flags = IORESOURCE_MEM,
488 .flags = IORESOURCE_IRQ,
492 static struct platform_device sdhi0_device = {
493 .name = "sh_mobile_sdhi",
494 .num_resources = ARRAY_SIZE(sdhi0_resources),
495 .resource = sdhi0_resources,
498 .platform_data = &sdhi0_info,
501 .hwblk_id = HWBLK_SDHI0,
505 #if !defined(CONFIG_MMC_SH_MMCIF)
507 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
509 gpio_set_value(GPIO_PTB7, state);
512 static struct sh_mobile_sdhi_info sdhi1_info = {
513 .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
514 .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
515 .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
516 .set_pwr = sdhi1_set_pwr,
519 static struct resource sdhi1_resources[] = {
524 .flags = IORESOURCE_MEM,
528 .flags = IORESOURCE_IRQ,
532 static struct platform_device sdhi1_device = {
533 .name = "sh_mobile_sdhi",
534 .num_resources = ARRAY_SIZE(sdhi1_resources),
535 .resource = sdhi1_resources,
538 .platform_data = &sdhi1_info,
541 .hwblk_id = HWBLK_SDHI1,
544 #endif /* CONFIG_MMC_SH_MMCIF */
549 static int mmc_spi_get_ro(struct device *dev)
551 return gpio_get_value(GPIO_PTY6);
554 static int mmc_spi_get_cd(struct device *dev)
556 return !gpio_get_value(GPIO_PTY7);
559 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
561 gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
564 static struct mmc_spi_platform_data mmc_spi_info = {
565 .get_ro = mmc_spi_get_ro,
566 .get_cd = mmc_spi_get_cd,
567 .caps = MMC_CAP_NEEDS_POLL,
568 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
569 .setpower = mmc_spi_setpower,
572 static struct spi_board_info spi_bus[] = {
574 .modalias = "mmc_spi",
575 .platform_data = &mmc_spi_info,
576 .max_speed_hz = 5000000,
578 .controller_data = (void *) GPIO_PTM4,
583 static struct sh_msiof_spi_info msiof0_data = {
587 static struct resource msiof0_resources[] = {
592 .flags = IORESOURCE_MEM,
596 .flags = IORESOURCE_IRQ,
600 static struct platform_device msiof0_device = {
601 .name = "spi_sh_msiof",
602 .id = 0, /* MSIOF0 */
604 .platform_data = &msiof0_data,
606 .num_resources = ARRAY_SIZE(msiof0_resources),
607 .resource = msiof0_resources,
609 .hwblk_id = HWBLK_MSIOF0,
615 /* I2C Video/Camera */
616 static struct i2c_board_info i2c_camera[] = {
618 I2C_BOARD_INFO("tw9910", 0x45),
622 I2C_BOARD_INFO("mt9t112", 0x3c),
626 I2C_BOARD_INFO("mt9t112", 0x3c),
631 static int tw9910_power(struct device *dev, int mode)
633 int val = mode ? 0 : 1;
635 gpio_set_value(GPIO_PTU2, val);
642 static struct tw9910_video_info tw9910_info = {
643 .buswidth = SOCAM_DATAWIDTH_8,
644 .mpout = TW9910_MPO_FIELD,
647 static struct soc_camera_link tw9910_link = {
650 .power = tw9910_power,
651 .board_info = &i2c_camera[0],
652 .priv = &tw9910_info,
656 static int mt9t112_power1(struct device *dev, int mode)
658 gpio_set_value(GPIO_PTA3, mode);
665 static struct mt9t112_camera_info mt9t112_info1 = {
666 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
667 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
670 static struct soc_camera_link mt9t112_link1 = {
672 .power = mt9t112_power1,
674 .board_info = &i2c_camera[1],
675 .priv = &mt9t112_info1,
678 static int mt9t112_power2(struct device *dev, int mode)
680 gpio_set_value(GPIO_PTA4, mode);
687 static struct mt9t112_camera_info mt9t112_info2 = {
688 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
689 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
692 static struct soc_camera_link mt9t112_link2 = {
694 .power = mt9t112_power2,
696 .board_info = &i2c_camera[2],
697 .priv = &mt9t112_info2,
700 static struct platform_device camera_devices[] = {
702 .name = "soc-camera-pdrv",
705 .platform_data = &tw9910_link,
709 .name = "soc-camera-pdrv",
712 .platform_data = &mt9t112_link1,
716 .name = "soc-camera-pdrv",
719 .platform_data = &mt9t112_link2,
725 static struct sh_fsi_platform_info fsi_info = {
726 .portb_flags = SH_FSI_BRS_INV |
727 SH_FSI_OUT_SLAVE_MODE |
728 SH_FSI_IN_SLAVE_MODE |
733 static struct resource fsi_resources[] = {
738 .flags = IORESOURCE_MEM,
742 .flags = IORESOURCE_IRQ,
746 static struct platform_device fsi_device = {
749 .num_resources = ARRAY_SIZE(fsi_resources),
750 .resource = fsi_resources,
752 .platform_data = &fsi_info,
755 .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
760 static struct resource irda_resources[] = {
765 .flags = IORESOURCE_MEM,
769 .flags = IORESOURCE_IRQ,
773 static struct platform_device irda_device = {
775 .num_resources = ARRAY_SIZE(irda_resources),
776 .resource = irda_resources,
779 #include <media/ak881x.h>
780 #include <media/sh_vou.h>
782 static struct ak881x_pdata ak881x_pdata = {
783 .flags = AK881X_IF_MODE_SLAVE,
786 static struct i2c_board_info ak8813 = {
787 I2C_BOARD_INFO("ak8813", 0x20),
788 .platform_data = &ak881x_pdata,
791 static struct sh_vou_pdata sh_vou_pdata = {
792 .bus_fmt = SH_VOU_BUS_8BIT,
793 .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
794 .board_info = &ak8813,
798 static struct resource sh_vou_resources[] = {
802 .flags = IORESOURCE_MEM,
806 .flags = IORESOURCE_IRQ,
810 static struct platform_device vou_device = {
813 .num_resources = ARRAY_SIZE(sh_vou_resources),
814 .resource = sh_vou_resources,
816 .platform_data = &sh_vou_pdata,
819 .hwblk_id = HWBLK_VOU,
823 #if defined(CONFIG_MMC_SH_MMCIF)
825 static void mmcif_set_pwr(struct platform_device *pdev, int state)
827 gpio_set_value(GPIO_PTB7, state);
830 static void mmcif_down_pwr(struct platform_device *pdev)
832 gpio_set_value(GPIO_PTB7, 0);
835 static struct resource sh_mmcif_resources[] = {
840 .flags = IORESOURCE_MEM,
845 .flags = IORESOURCE_IRQ,
850 .flags = IORESOURCE_IRQ,
854 static struct sh_mmcif_plat_data sh_mmcif_plat = {
855 .set_pwr = mmcif_set_pwr,
856 .down_pwr = mmcif_down_pwr,
857 .sup_pclk = 0, /* SH7724: Max Pclk/2 */
858 .caps = MMC_CAP_4_BIT_DATA |
861 .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
864 static struct platform_device sh_mmcif_device = {
868 .platform_data = &sh_mmcif_plat,
870 .num_resources = ARRAY_SIZE(sh_mmcif_resources),
871 .resource = sh_mmcif_resources,
875 static struct platform_device *ecovec_devices[] __initdata = {
885 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
887 #if !defined(CONFIG_MMC_SH_MMCIF)
899 #if defined(CONFIG_MMC_SH_MMCIF)
905 #define EEPROM_ADDR 0x50
906 static u8 mac_read(struct i2c_adapter *a, u8 command)
908 struct i2c_msg msg[2];
912 msg[0].addr = EEPROM_ADDR;
915 msg[0].buf = &command;
917 msg[1].addr = EEPROM_ADDR;
918 msg[1].flags = I2C_M_RD;
922 ret = i2c_transfer(a, msg, 2);
924 printk(KERN_ERR "error %d\n", ret);
931 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
933 struct i2c_adapter *a = i2c_get_adapter(1);
937 pr_err("can not get I2C 1\n");
941 /* read MAC address frome EEPROM */
942 for (i = 0; i < sizeof(pd->mac_addr); i++) {
943 pd->mac_addr[i] = mac_read(a, 0x10 + i);
950 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
952 pr_err("unable to read sh_eth MAC address\n");
956 #define PORT_HIZA 0xA4050158
957 #define IODRIVEA 0xA405018A
959 extern char ecovec24_sdram_enter_start;
960 extern char ecovec24_sdram_enter_end;
961 extern char ecovec24_sdram_leave_start;
962 extern char ecovec24_sdram_leave_end;
964 static int __init arch_setup(void)
968 /* register board specific self-refresh code */
969 sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
971 &ecovec24_sdram_enter_start,
972 &ecovec24_sdram_enter_end,
973 &ecovec24_sdram_leave_start,
974 &ecovec24_sdram_leave_end);
976 /* enable STATUS0, STATUS2 and PDSTATUS */
977 gpio_request(GPIO_FN_STATUS0, NULL);
978 gpio_request(GPIO_FN_STATUS2, NULL);
979 gpio_request(GPIO_FN_PDSTATUS, NULL);
982 gpio_request(GPIO_FN_SCIF0_TXD, NULL);
983 gpio_request(GPIO_FN_SCIF0_RXD, NULL);
985 /* enable debug LED */
986 gpio_request(GPIO_PTG0, NULL);
987 gpio_request(GPIO_PTG1, NULL);
988 gpio_request(GPIO_PTG2, NULL);
989 gpio_request(GPIO_PTG3, NULL);
990 gpio_direction_output(GPIO_PTG0, 0);
991 gpio_direction_output(GPIO_PTG1, 0);
992 gpio_direction_output(GPIO_PTG2, 0);
993 gpio_direction_output(GPIO_PTG3, 0);
994 __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
997 gpio_request(GPIO_PTA1, NULL);
998 gpio_direction_output(GPIO_PTA1, 1);
1001 gpio_request(GPIO_FN_RMII_RXD0, NULL);
1002 gpio_request(GPIO_FN_RMII_RXD1, NULL);
1003 gpio_request(GPIO_FN_RMII_TXD0, NULL);
1004 gpio_request(GPIO_FN_RMII_TXD1, NULL);
1005 gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
1006 gpio_request(GPIO_FN_RMII_TX_EN, NULL);
1007 gpio_request(GPIO_FN_RMII_RX_ER, NULL);
1008 gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
1009 gpio_request(GPIO_FN_MDIO, NULL);
1010 gpio_request(GPIO_FN_MDC, NULL);
1011 gpio_request(GPIO_FN_LNKSTA, NULL);
1014 __raw_writew(0x0000, 0xA4D80000);
1015 __raw_writew(0x0000, 0xA4D90000);
1016 gpio_request(GPIO_PTB3, NULL);
1017 gpio_request(GPIO_PTB4, NULL);
1018 gpio_request(GPIO_PTB5, NULL);
1019 gpio_direction_input(GPIO_PTB3);
1020 gpio_direction_output(GPIO_PTB4, 0);
1021 gpio_direction_output(GPIO_PTB5, 0);
1022 __raw_writew(0x0600, 0xa40501d4);
1023 __raw_writew(0x0600, 0xa4050192);
1025 if (gpio_get_value(GPIO_PTB3)) {
1026 printk(KERN_INFO "USB1 function is selected\n");
1027 usb1_common_device.name = "r8a66597_udc";
1029 printk(KERN_INFO "USB1 host is selected\n");
1030 usb1_common_device.name = "r8a66597_hcd";
1034 gpio_request(GPIO_FN_LCDD23, NULL);
1035 gpio_request(GPIO_FN_LCDD22, NULL);
1036 gpio_request(GPIO_FN_LCDD21, NULL);
1037 gpio_request(GPIO_FN_LCDD20, NULL);
1038 gpio_request(GPIO_FN_LCDD19, NULL);
1039 gpio_request(GPIO_FN_LCDD18, NULL);
1040 gpio_request(GPIO_FN_LCDD17, NULL);
1041 gpio_request(GPIO_FN_LCDD16, NULL);
1042 gpio_request(GPIO_FN_LCDD15, NULL);
1043 gpio_request(GPIO_FN_LCDD14, NULL);
1044 gpio_request(GPIO_FN_LCDD13, NULL);
1045 gpio_request(GPIO_FN_LCDD12, NULL);
1046 gpio_request(GPIO_FN_LCDD11, NULL);
1047 gpio_request(GPIO_FN_LCDD10, NULL);
1048 gpio_request(GPIO_FN_LCDD9, NULL);
1049 gpio_request(GPIO_FN_LCDD8, NULL);
1050 gpio_request(GPIO_FN_LCDD7, NULL);
1051 gpio_request(GPIO_FN_LCDD6, NULL);
1052 gpio_request(GPIO_FN_LCDD5, NULL);
1053 gpio_request(GPIO_FN_LCDD4, NULL);
1054 gpio_request(GPIO_FN_LCDD3, NULL);
1055 gpio_request(GPIO_FN_LCDD2, NULL);
1056 gpio_request(GPIO_FN_LCDD1, NULL);
1057 gpio_request(GPIO_FN_LCDD0, NULL);
1058 gpio_request(GPIO_FN_LCDDISP, NULL);
1059 gpio_request(GPIO_FN_LCDHSYN, NULL);
1060 gpio_request(GPIO_FN_LCDDCK, NULL);
1061 gpio_request(GPIO_FN_LCDVSYN, NULL);
1062 gpio_request(GPIO_FN_LCDDON, NULL);
1063 gpio_request(GPIO_FN_LCDLCLK, NULL);
1064 __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
1066 gpio_request(GPIO_PTE6, NULL);
1067 gpio_request(GPIO_PTU1, NULL);
1068 gpio_request(GPIO_PTR1, NULL);
1069 gpio_request(GPIO_PTA2, NULL);
1070 gpio_direction_input(GPIO_PTE6);
1071 gpio_direction_output(GPIO_PTU1, 0);
1072 gpio_direction_output(GPIO_PTR1, 0);
1073 gpio_direction_output(GPIO_PTA2, 0);
1075 /* I/O buffer drive ability is high */
1076 __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
1078 if (gpio_get_value(GPIO_PTE6)) {
1080 lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
1081 lcdc_info.ch[0].clock_divider = 1;
1082 lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes;
1083 lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes);
1085 gpio_set_value(GPIO_PTA2, 1);
1086 gpio_set_value(GPIO_PTU1, 1);
1089 lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
1090 lcdc_info.ch[0].clock_divider = 2;
1091 lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes;
1092 lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes);
1094 gpio_set_value(GPIO_PTR1, 1);
1098 * LCDDON control is needed for Panel,
1099 * but current sh_mobile_lcdc driver doesn't control it.
1100 * It is temporary correspondence
1102 gpio_request(GPIO_PTF4, NULL);
1103 gpio_direction_output(GPIO_PTF4, 1);
1105 /* enable TouchScreen */
1106 i2c_register_board_info(0, &ts_i2c_clients, 1);
1107 set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
1111 gpio_request(GPIO_FN_VIO0_D15, NULL);
1112 gpio_request(GPIO_FN_VIO0_D14, NULL);
1113 gpio_request(GPIO_FN_VIO0_D13, NULL);
1114 gpio_request(GPIO_FN_VIO0_D12, NULL);
1115 gpio_request(GPIO_FN_VIO0_D11, NULL);
1116 gpio_request(GPIO_FN_VIO0_D10, NULL);
1117 gpio_request(GPIO_FN_VIO0_D9, NULL);
1118 gpio_request(GPIO_FN_VIO0_D8, NULL);
1119 gpio_request(GPIO_FN_VIO0_D7, NULL);
1120 gpio_request(GPIO_FN_VIO0_D6, NULL);
1121 gpio_request(GPIO_FN_VIO0_D5, NULL);
1122 gpio_request(GPIO_FN_VIO0_D4, NULL);
1123 gpio_request(GPIO_FN_VIO0_D3, NULL);
1124 gpio_request(GPIO_FN_VIO0_D2, NULL);
1125 gpio_request(GPIO_FN_VIO0_D1, NULL);
1126 gpio_request(GPIO_FN_VIO0_D0, NULL);
1127 gpio_request(GPIO_FN_VIO0_VD, NULL);
1128 gpio_request(GPIO_FN_VIO0_CLK, NULL);
1129 gpio_request(GPIO_FN_VIO0_FLD, NULL);
1130 gpio_request(GPIO_FN_VIO0_HD, NULL);
1131 platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
1134 gpio_request(GPIO_FN_VIO1_D7, NULL);
1135 gpio_request(GPIO_FN_VIO1_D6, NULL);
1136 gpio_request(GPIO_FN_VIO1_D5, NULL);
1137 gpio_request(GPIO_FN_VIO1_D4, NULL);
1138 gpio_request(GPIO_FN_VIO1_D3, NULL);
1139 gpio_request(GPIO_FN_VIO1_D2, NULL);
1140 gpio_request(GPIO_FN_VIO1_D1, NULL);
1141 gpio_request(GPIO_FN_VIO1_D0, NULL);
1142 gpio_request(GPIO_FN_VIO1_FLD, NULL);
1143 gpio_request(GPIO_FN_VIO1_HD, NULL);
1144 gpio_request(GPIO_FN_VIO1_VD, NULL);
1145 gpio_request(GPIO_FN_VIO1_CLK, NULL);
1146 platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
1149 gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1150 gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1151 gpio_request(GPIO_FN_KEYOUT3, NULL);
1152 gpio_request(GPIO_FN_KEYOUT2, NULL);
1153 gpio_request(GPIO_FN_KEYOUT1, NULL);
1154 gpio_request(GPIO_FN_KEYOUT0, NULL);
1155 gpio_request(GPIO_FN_KEYIN0, NULL);
1157 /* enable user debug switch */
1158 gpio_request(GPIO_PTR0, NULL);
1159 gpio_request(GPIO_PTR4, NULL);
1160 gpio_request(GPIO_PTR5, NULL);
1161 gpio_request(GPIO_PTR6, NULL);
1162 gpio_direction_input(GPIO_PTR0);
1163 gpio_direction_input(GPIO_PTR4);
1164 gpio_direction_input(GPIO_PTR5);
1165 gpio_direction_input(GPIO_PTR6);
1167 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
1168 /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1169 gpio_request(GPIO_FN_SDHI0CD, NULL);
1170 gpio_request(GPIO_FN_SDHI0WP, NULL);
1171 gpio_request(GPIO_FN_SDHI0CMD, NULL);
1172 gpio_request(GPIO_FN_SDHI0CLK, NULL);
1173 gpio_request(GPIO_FN_SDHI0D3, NULL);
1174 gpio_request(GPIO_FN_SDHI0D2, NULL);
1175 gpio_request(GPIO_FN_SDHI0D1, NULL);
1176 gpio_request(GPIO_FN_SDHI0D0, NULL);
1177 gpio_request(GPIO_PTB6, NULL);
1178 gpio_direction_output(GPIO_PTB6, 0);
1180 #if !defined(CONFIG_MMC_SH_MMCIF)
1181 /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1182 gpio_request(GPIO_FN_SDHI1CD, NULL);
1183 gpio_request(GPIO_FN_SDHI1WP, NULL);
1184 gpio_request(GPIO_FN_SDHI1CMD, NULL);
1185 gpio_request(GPIO_FN_SDHI1CLK, NULL);
1186 gpio_request(GPIO_FN_SDHI1D3, NULL);
1187 gpio_request(GPIO_FN_SDHI1D2, NULL);
1188 gpio_request(GPIO_FN_SDHI1D1, NULL);
1189 gpio_request(GPIO_FN_SDHI1D0, NULL);
1190 gpio_request(GPIO_PTB7, NULL);
1191 gpio_direction_output(GPIO_PTB7, 0);
1193 /* I/O buffer drive ability is high for SDHI1 */
1194 __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1195 #endif /* CONFIG_MMC_SH_MMCIF */
1197 /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1198 gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1199 gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1200 gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1201 gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1202 gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1203 gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1204 gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1205 gpio_request(GPIO_PTY6, NULL); /* write protect */
1206 gpio_direction_input(GPIO_PTY6);
1207 gpio_request(GPIO_PTY7, NULL); /* card detect */
1208 gpio_direction_input(GPIO_PTY7);
1210 spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1214 gpio_request(GPIO_PTU2, NULL);
1215 gpio_direction_output(GPIO_PTU2, 1);
1218 gpio_request(GPIO_PTA3, NULL);
1219 gpio_request(GPIO_PTA4, NULL);
1220 gpio_direction_output(GPIO_PTA3, 0);
1221 gpio_direction_output(GPIO_PTA4, 0);
1224 gpio_request(GPIO_FN_FSIMCKB, NULL);
1225 gpio_request(GPIO_FN_FSIIBSD, NULL);
1226 gpio_request(GPIO_FN_FSIOBSD, NULL);
1227 gpio_request(GPIO_FN_FSIIBBCK, NULL);
1228 gpio_request(GPIO_FN_FSIIBLRCK, NULL);
1229 gpio_request(GPIO_FN_FSIOBBCK, NULL);
1230 gpio_request(GPIO_FN_FSIOBLRCK, NULL);
1231 gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1233 /* set SPU2 clock to 83.4 MHz */
1234 clk = clk_get(NULL, "spu_clk");
1236 clk_set_rate(clk, clk_round_rate(clk, 83333333));
1240 /* change parent of FSI B */
1241 clk = clk_get(NULL, "fsib_clk");
1243 /* 48kHz dummy clock was used to make sure 1/1 divide */
1244 clk_set_rate(&sh7724_fsimckb_clk, 48000);
1245 clk_set_parent(clk, &sh7724_fsimckb_clk);
1246 clk_set_rate(clk, 48000);
1250 gpio_request(GPIO_PTU0, NULL);
1251 gpio_direction_output(GPIO_PTU0, 0);
1254 /* enable motion sensor */
1255 gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1256 gpio_direction_input(GPIO_FN_INTC_IRQ1);
1258 /* set VPU clock to 166 MHz */
1259 clk = clk_get(NULL, "vpu_clk");
1261 clk_set_rate(clk, clk_round_rate(clk, 166000000));
1266 gpio_request(GPIO_FN_IRDA_OUT, NULL);
1267 gpio_request(GPIO_FN_IRDA_IN, NULL);
1268 gpio_request(GPIO_PTU5, NULL);
1269 gpio_direction_output(GPIO_PTU5, 0);
1271 #if defined(CONFIG_MMC_SH_MMCIF)
1272 /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1273 gpio_request(GPIO_FN_MMC_D7, NULL);
1274 gpio_request(GPIO_FN_MMC_D6, NULL);
1275 gpio_request(GPIO_FN_MMC_D5, NULL);
1276 gpio_request(GPIO_FN_MMC_D4, NULL);
1277 gpio_request(GPIO_FN_MMC_D3, NULL);
1278 gpio_request(GPIO_FN_MMC_D2, NULL);
1279 gpio_request(GPIO_FN_MMC_D1, NULL);
1280 gpio_request(GPIO_FN_MMC_D0, NULL);
1281 gpio_request(GPIO_FN_MMC_CLK, NULL);
1282 gpio_request(GPIO_FN_MMC_CMD, NULL);
1283 gpio_request(GPIO_PTB7, NULL);
1284 gpio_direction_output(GPIO_PTB7, 0);
1286 /* I/O buffer drive ability is high for MMCIF */
1287 __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1290 /* enable I2C device */
1291 i2c_register_board_info(0, i2c0_devices,
1292 ARRAY_SIZE(i2c0_devices));
1294 i2c_register_board_info(1, i2c1_devices,
1295 ARRAY_SIZE(i2c1_devices));
1298 gpio_request(GPIO_FN_DV_D15, NULL);
1299 gpio_request(GPIO_FN_DV_D14, NULL);
1300 gpio_request(GPIO_FN_DV_D13, NULL);
1301 gpio_request(GPIO_FN_DV_D12, NULL);
1302 gpio_request(GPIO_FN_DV_D11, NULL);
1303 gpio_request(GPIO_FN_DV_D10, NULL);
1304 gpio_request(GPIO_FN_DV_D9, NULL);
1305 gpio_request(GPIO_FN_DV_D8, NULL);
1306 gpio_request(GPIO_FN_DV_CLKI, NULL);
1307 gpio_request(GPIO_FN_DV_CLK, NULL);
1308 gpio_request(GPIO_FN_DV_VSYNC, NULL);
1309 gpio_request(GPIO_FN_DV_HSYNC, NULL);
1311 /* AK8813 power / reset sequence */
1312 gpio_request(GPIO_PTG4, NULL);
1313 gpio_request(GPIO_PTU3, NULL);
1315 gpio_direction_output(GPIO_PTG4, 0);
1317 gpio_direction_output(GPIO_PTU3, 1);
1321 /* Power up, reset */
1322 gpio_set_value(GPIO_PTU3, 0);
1327 gpio_set_value(GPIO_PTG4, 1);
1329 return platform_add_devices(ecovec_devices,
1330 ARRAY_SIZE(ecovec_devices));
1332 arch_initcall(arch_setup);
1334 static int __init devices_setup(void)
1336 sh_eth_init(&sh_eth_plat);
1339 device_initcall(devices_setup);
1341 static struct sh_machine_vector mv_ecovec __initmv = {
1342 .mv_name = "R0P7724 (EcoVec)",