2 * Copyright (C) 2009 Renesas Solutions Corp.
4 * Kuninori Morimoto <morimoto.kuninori@renesas.com>
6 * This file is subject to the terms and conditions of the GNU General Public
7 * License. See the file "COPYING" in the main directory of this archive
11 #include <linux/init.h>
12 #include <linux/device.h>
13 #include <linux/platform_device.h>
14 #include <linux/mfd/sh_mobile_sdhi.h>
15 #include <linux/mmc/host.h>
16 #include <linux/mmc/sh_mmcif.h>
17 #include <linux/mtd/physmap.h>
18 #include <linux/gpio.h>
19 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/usb/r8a66597.h>
23 #include <linux/i2c.h>
24 #include <linux/i2c/tsc2007.h>
25 #include <linux/spi/spi.h>
26 #include <linux/spi/sh_msiof.h>
27 #include <linux/spi/mmc_spi.h>
28 #include <linux/input.h>
29 #include <linux/input/sh_keysc.h>
30 #include <video/sh_mobile_lcdc.h>
31 #include <sound/sh_fsi.h>
32 #include <media/sh_mobile_ceu.h>
33 #include <media/tw9910.h>
34 #include <media/mt9t112.h>
35 #include <asm/heartbeat.h>
36 #include <asm/sh_eth.h>
37 #include <asm/clock.h>
38 #include <asm/suspend.h>
39 #include <cpu/sh7724.h>
42 * Address Interface BusWidth
43 *-----------------------------------------
44 * 0x0000_0000 uboot 16bit
45 * 0x0004_0000 Linux romImage 16bit
46 * 0x0014_0000 MTD for Linux 16bit
47 * 0x0400_0000 Internal I/O 16/32bit
48 * 0x0800_0000 DRAM 32bit
49 * 0x1800_0000 MFI 16bit
53 *------------------------------
54 * DS2[1] = FlashROM write protect ON : write protect
55 * OFF : No write protect
56 * DS2[2] = RMII / TS, SCIF ON : RMII
58 * DS2[3] = Camera / Video ON : Camera
60 * DS2[5] = NTSC_OUT Clock ON : On board OSC
62 * DS2[6-7] = MMC / SD ON-OFF : SD
67 static unsigned char led_pos[] = { 0, 1, 2, 3 };
69 static struct heartbeat_data heartbeat_data = {
74 static struct resource heartbeat_resource = {
75 .start = 0xA405012C, /* PTG */
76 .end = 0xA405012E - 1,
77 .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
80 static struct platform_device heartbeat_device = {
84 .platform_data = &heartbeat_data,
87 .resource = &heartbeat_resource,
91 static struct mtd_partition nor_flash_partitions[] = {
93 .name = "boot loader",
95 .size = (5 * 1024 * 1024),
96 .mask_flags = MTD_WRITEABLE, /* force read-only */
99 .offset = MTDPART_OFS_APPEND,
100 .size = MTDPART_SIZ_FULL,
104 static struct physmap_flash_data nor_flash_data = {
106 .parts = nor_flash_partitions,
107 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
110 static struct resource nor_flash_resources[] = {
115 .flags = IORESOURCE_MEM,
119 static struct platform_device nor_flash_device = {
120 .name = "physmap-flash",
121 .resource = nor_flash_resources,
122 .num_resources = ARRAY_SIZE(nor_flash_resources),
124 .platform_data = &nor_flash_data,
129 #define SH_ETH_ADDR (0xA4600000)
130 static struct resource sh_eth_resources[] = {
132 .start = SH_ETH_ADDR,
133 .end = SH_ETH_ADDR + 0x1FC,
134 .flags = IORESOURCE_MEM,
138 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
142 static struct sh_eth_plat_data sh_eth_plat = {
143 .phy = 0x1f, /* SMSC LAN8700 */
144 .edmac_endian = EDMAC_LITTLE_ENDIAN,
145 .ether_link_active_low = 1
148 static struct platform_device sh_eth_device = {
152 .platform_data = &sh_eth_plat,
154 .num_resources = ARRAY_SIZE(sh_eth_resources),
155 .resource = sh_eth_resources,
157 .hwblk_id = HWBLK_ETHER,
162 static void usb0_port_power(int port, int power)
164 gpio_set_value(GPIO_PTB4, power);
167 static struct r8a66597_platdata usb0_host_data = {
169 .port_power = usb0_port_power,
172 static struct resource usb0_host_resources[] = {
175 .end = 0xa4d80124 - 1,
176 .flags = IORESOURCE_MEM,
181 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
185 static struct platform_device usb0_host_device = {
186 .name = "r8a66597_hcd",
189 .dma_mask = NULL, /* not use dma */
190 .coherent_dma_mask = 0xffffffff,
191 .platform_data = &usb0_host_data,
193 .num_resources = ARRAY_SIZE(usb0_host_resources),
194 .resource = usb0_host_resources,
197 /* USB1 host/function */
198 static void usb1_port_power(int port, int power)
200 gpio_set_value(GPIO_PTB5, power);
203 static struct r8a66597_platdata usb1_common_data = {
205 .port_power = usb1_port_power,
208 static struct resource usb1_common_resources[] = {
211 .end = 0xa4d90124 - 1,
212 .flags = IORESOURCE_MEM,
217 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
221 static struct platform_device usb1_common_device = {
222 /* .name will be added in arch_setup */
225 .dma_mask = NULL, /* not use dma */
226 .coherent_dma_mask = 0xffffffff,
227 .platform_data = &usb1_common_data,
229 .num_resources = ARRAY_SIZE(usb1_common_resources),
230 .resource = usb1_common_resources,
234 static struct sh_mobile_lcdc_info lcdc_info = {
236 .interface_type = RGB18,
237 .chan = LCDC_CHAN_MAINLCD,
240 .sync = 0, /* hsync and vsync are active low */
242 .lcd_size_cfg = { /* 7.0 inch */
251 static struct resource lcdc_resources[] = {
256 .flags = IORESOURCE_MEM,
260 .flags = IORESOURCE_IRQ,
264 static struct platform_device lcdc_device = {
265 .name = "sh_mobile_lcdc_fb",
266 .num_resources = ARRAY_SIZE(lcdc_resources),
267 .resource = lcdc_resources,
269 .platform_data = &lcdc_info,
272 .hwblk_id = HWBLK_LCDC,
277 static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
278 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
281 static struct resource ceu0_resources[] = {
286 .flags = IORESOURCE_MEM,
290 .flags = IORESOURCE_IRQ,
293 /* place holder for contiguous memory */
297 static struct platform_device ceu0_device = {
298 .name = "sh_mobile_ceu",
299 .id = 0, /* "ceu0" clock */
300 .num_resources = ARRAY_SIZE(ceu0_resources),
301 .resource = ceu0_resources,
303 .platform_data = &sh_mobile_ceu0_info,
306 .hwblk_id = HWBLK_CEU0,
311 static struct sh_mobile_ceu_info sh_mobile_ceu1_info = {
312 .flags = SH_CEU_FLAG_USE_8BIT_BUS,
315 static struct resource ceu1_resources[] = {
320 .flags = IORESOURCE_MEM,
324 .flags = IORESOURCE_IRQ,
327 /* place holder for contiguous memory */
331 static struct platform_device ceu1_device = {
332 .name = "sh_mobile_ceu",
333 .id = 1, /* "ceu1" clock */
334 .num_resources = ARRAY_SIZE(ceu1_resources),
335 .resource = ceu1_resources,
337 .platform_data = &sh_mobile_ceu1_info,
340 .hwblk_id = HWBLK_CEU1,
345 static struct i2c_board_info i2c0_devices[] = {
347 I2C_BOARD_INFO("da7210", 0x1a),
351 static struct i2c_board_info i2c1_devices[] = {
353 I2C_BOARD_INFO("r2025sd", 0x32),
356 I2C_BOARD_INFO("lis3lv02d", 0x1c),
362 static struct sh_keysc_info keysc_info = {
363 .mode = SH_KEYSC_MODE_1,
367 .keycodes = { KEY_1, 0, 0, 0, 0,
372 KEY_6, 0, 0, 0, 0, },
375 static struct resource keysc_resources[] = {
380 .flags = IORESOURCE_MEM,
384 .flags = IORESOURCE_IRQ,
388 static struct platform_device keysc_device = {
390 .id = 0, /* keysc0 clock */
391 .num_resources = ARRAY_SIZE(keysc_resources),
392 .resource = keysc_resources,
394 .platform_data = &keysc_info,
397 .hwblk_id = HWBLK_KEYSC,
403 static int ts_get_pendown_state(void)
406 gpio_free(GPIO_FN_INTC_IRQ0);
407 gpio_request(GPIO_PTZ0, NULL);
408 gpio_direction_input(GPIO_PTZ0);
410 val = gpio_get_value(GPIO_PTZ0);
412 gpio_free(GPIO_PTZ0);
413 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
418 static int ts_init(void)
420 gpio_request(GPIO_FN_INTC_IRQ0, NULL);
424 static struct tsc2007_platform_data tsc2007_info = {
427 .get_pendown_state = ts_get_pendown_state,
428 .init_platform_hw = ts_init,
431 static struct i2c_board_info ts_i2c_clients = {
432 I2C_BOARD_INFO("tsc2007", 0x48),
434 .platform_data = &tsc2007_info,
438 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
440 static void sdhi0_set_pwr(struct platform_device *pdev, int state)
442 gpio_set_value(GPIO_PTB6, state);
445 static struct sh_mobile_sdhi_info sdhi0_info = {
446 .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
447 .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
448 .set_pwr = sdhi0_set_pwr,
451 static struct resource sdhi0_resources[] = {
456 .flags = IORESOURCE_MEM,
460 .flags = IORESOURCE_IRQ,
464 static struct platform_device sdhi0_device = {
465 .name = "sh_mobile_sdhi",
466 .num_resources = ARRAY_SIZE(sdhi0_resources),
467 .resource = sdhi0_resources,
470 .platform_data = &sdhi0_info,
473 .hwblk_id = HWBLK_SDHI0,
477 #if !defined(CONFIG_MMC_SH_MMCIF)
479 static void sdhi1_set_pwr(struct platform_device *pdev, int state)
481 gpio_set_value(GPIO_PTB7, state);
484 static struct sh_mobile_sdhi_info sdhi1_info = {
485 .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
486 .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
487 .set_pwr = sdhi1_set_pwr,
490 static struct resource sdhi1_resources[] = {
495 .flags = IORESOURCE_MEM,
499 .flags = IORESOURCE_IRQ,
503 static struct platform_device sdhi1_device = {
504 .name = "sh_mobile_sdhi",
505 .num_resources = ARRAY_SIZE(sdhi1_resources),
506 .resource = sdhi1_resources,
509 .platform_data = &sdhi1_info,
512 .hwblk_id = HWBLK_SDHI1,
515 #endif /* CONFIG_MMC_SH_MMCIF */
520 static int mmc_spi_get_ro(struct device *dev)
522 return gpio_get_value(GPIO_PTY6);
525 static int mmc_spi_get_cd(struct device *dev)
527 return !gpio_get_value(GPIO_PTY7);
530 static void mmc_spi_setpower(struct device *dev, unsigned int maskval)
532 gpio_set_value(GPIO_PTB6, maskval ? 1 : 0);
535 static struct mmc_spi_platform_data mmc_spi_info = {
536 .get_ro = mmc_spi_get_ro,
537 .get_cd = mmc_spi_get_cd,
538 .caps = MMC_CAP_NEEDS_POLL,
539 .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* 3.3V only */
540 .setpower = mmc_spi_setpower,
543 static struct spi_board_info spi_bus[] = {
545 .modalias = "mmc_spi",
546 .platform_data = &mmc_spi_info,
547 .max_speed_hz = 5000000,
549 .controller_data = (void *) GPIO_PTM4,
554 static struct sh_msiof_spi_info msiof0_data = {
558 static struct resource msiof0_resources[] = {
563 .flags = IORESOURCE_MEM,
567 .flags = IORESOURCE_IRQ,
571 static struct platform_device msiof0_device = {
572 .name = "spi_sh_msiof",
573 .id = 0, /* MSIOF0 */
575 .platform_data = &msiof0_data,
577 .num_resources = ARRAY_SIZE(msiof0_resources),
578 .resource = msiof0_resources,
580 .hwblk_id = HWBLK_MSIOF0,
586 /* I2C Video/Camera */
587 static struct i2c_board_info i2c_camera[] = {
589 I2C_BOARD_INFO("tw9910", 0x45),
593 I2C_BOARD_INFO("mt9t112", 0x3c),
597 I2C_BOARD_INFO("mt9t112", 0x3c),
602 static int tw9910_power(struct device *dev, int mode)
604 int val = mode ? 0 : 1;
606 gpio_set_value(GPIO_PTU2, val);
613 static struct tw9910_video_info tw9910_info = {
614 .buswidth = SOCAM_DATAWIDTH_8,
615 .mpout = TW9910_MPO_FIELD,
618 static struct soc_camera_link tw9910_link = {
621 .power = tw9910_power,
622 .board_info = &i2c_camera[0],
623 .priv = &tw9910_info,
627 static int mt9t112_power1(struct device *dev, int mode)
629 gpio_set_value(GPIO_PTA3, mode);
636 static struct mt9t112_camera_info mt9t112_info1 = {
637 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
638 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
641 static struct soc_camera_link mt9t112_link1 = {
643 .power = mt9t112_power1,
645 .board_info = &i2c_camera[1],
646 .priv = &mt9t112_info1,
649 static int mt9t112_power2(struct device *dev, int mode)
651 gpio_set_value(GPIO_PTA4, mode);
658 static struct mt9t112_camera_info mt9t112_info2 = {
659 .flags = MT9T112_FLAG_PCLK_RISING_EDGE | MT9T112_FLAG_DATAWIDTH_8,
660 .divider = { 0x49, 0x6, 0, 6, 0, 9, 9, 6, 0 }, /* for 24MHz */
663 static struct soc_camera_link mt9t112_link2 = {
665 .power = mt9t112_power2,
667 .board_info = &i2c_camera[2],
668 .priv = &mt9t112_info2,
671 static struct platform_device camera_devices[] = {
673 .name = "soc-camera-pdrv",
676 .platform_data = &tw9910_link,
680 .name = "soc-camera-pdrv",
683 .platform_data = &mt9t112_link1,
687 .name = "soc-camera-pdrv",
690 .platform_data = &mt9t112_link2,
697 * FSI-B use external clock which came from da7210.
698 * So, we should change parent of fsi
700 #define FCLKBCR 0xa415000c
701 static void fsimck_init(struct clk *clk)
703 u32 status = __raw_readl(clk->enable_reg);
705 /* use external clock */
706 status &= ~0x000000ff;
707 status |= 0x00000080;
709 __raw_writel(status, clk->enable_reg);
712 static struct clk_ops fsimck_clk_ops = {
716 static struct clk fsimckb_clk = {
717 .ops = &fsimck_clk_ops,
718 .enable_reg = (void __iomem *)FCLKBCR,
719 .rate = 0, /* unknown */
722 static struct sh_fsi_platform_info fsi_info = {
723 .portb_flags = SH_FSI_BRS_INV |
724 SH_FSI_OUT_SLAVE_MODE |
725 SH_FSI_IN_SLAVE_MODE |
730 static struct resource fsi_resources[] = {
735 .flags = IORESOURCE_MEM,
739 .flags = IORESOURCE_IRQ,
743 static struct platform_device fsi_device = {
746 .num_resources = ARRAY_SIZE(fsi_resources),
747 .resource = fsi_resources,
749 .platform_data = &fsi_info,
752 .hwblk_id = HWBLK_SPU, /* FSI needs SPU hwblk */
757 static struct resource irda_resources[] = {
762 .flags = IORESOURCE_MEM,
766 .flags = IORESOURCE_IRQ,
770 static struct platform_device irda_device = {
772 .num_resources = ARRAY_SIZE(irda_resources),
773 .resource = irda_resources,
776 #include <media/ak881x.h>
777 #include <media/sh_vou.h>
779 static struct ak881x_pdata ak881x_pdata = {
780 .flags = AK881X_IF_MODE_SLAVE,
783 static struct i2c_board_info ak8813 = {
784 I2C_BOARD_INFO("ak8813", 0x20),
785 .platform_data = &ak881x_pdata,
788 static struct sh_vou_pdata sh_vou_pdata = {
789 .bus_fmt = SH_VOU_BUS_8BIT,
790 .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
791 .board_info = &ak8813,
795 static struct resource sh_vou_resources[] = {
799 .flags = IORESOURCE_MEM,
803 .flags = IORESOURCE_IRQ,
807 static struct platform_device vou_device = {
810 .num_resources = ARRAY_SIZE(sh_vou_resources),
811 .resource = sh_vou_resources,
813 .platform_data = &sh_vou_pdata,
816 .hwblk_id = HWBLK_VOU,
820 #if defined(CONFIG_MMC_SH_MMCIF)
822 static void mmcif_set_pwr(struct platform_device *pdev, int state)
824 gpio_set_value(GPIO_PTB7, state);
827 static void mmcif_down_pwr(struct platform_device *pdev)
829 gpio_set_value(GPIO_PTB7, 0);
832 static struct resource sh_mmcif_resources[] = {
837 .flags = IORESOURCE_MEM,
842 .flags = IORESOURCE_IRQ,
847 .flags = IORESOURCE_IRQ,
851 static struct sh_mmcif_plat_data sh_mmcif_plat = {
852 .set_pwr = mmcif_set_pwr,
853 .down_pwr = mmcif_down_pwr,
854 .sup_pclk = 0, /* SH7724: Max Pclk/2 */
855 .caps = MMC_CAP_4_BIT_DATA |
858 .ocr = MMC_VDD_32_33 | MMC_VDD_33_34,
861 static struct platform_device sh_mmcif_device = {
865 .platform_data = &sh_mmcif_plat,
867 .num_resources = ARRAY_SIZE(sh_mmcif_resources),
868 .resource = sh_mmcif_resources,
872 static struct platform_device *ecovec_devices[] __initdata = {
882 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
884 #if !defined(CONFIG_MMC_SH_MMCIF)
896 #if defined(CONFIG_MMC_SH_MMCIF)
902 #define EEPROM_ADDR 0x50
903 static u8 mac_read(struct i2c_adapter *a, u8 command)
905 struct i2c_msg msg[2];
909 msg[0].addr = EEPROM_ADDR;
912 msg[0].buf = &command;
914 msg[1].addr = EEPROM_ADDR;
915 msg[1].flags = I2C_M_RD;
919 ret = i2c_transfer(a, msg, 2);
921 printk(KERN_ERR "error %d\n", ret);
928 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
930 struct i2c_adapter *a = i2c_get_adapter(1);
934 pr_err("can not get I2C 1\n");
938 /* read MAC address frome EEPROM */
939 for (i = 0; i < sizeof(pd->mac_addr); i++) {
940 pd->mac_addr[i] = mac_read(a, 0x10 + i);
947 static void __init sh_eth_init(struct sh_eth_plat_data *pd)
949 pr_err("unable to read sh_eth MAC address\n");
953 #define PORT_HIZA 0xA4050158
954 #define IODRIVEA 0xA405018A
956 extern char ecovec24_sdram_enter_start;
957 extern char ecovec24_sdram_enter_end;
958 extern char ecovec24_sdram_leave_start;
959 extern char ecovec24_sdram_leave_end;
961 static int __init arch_setup(void)
965 /* register board specific self-refresh code */
966 sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
968 &ecovec24_sdram_enter_start,
969 &ecovec24_sdram_enter_end,
970 &ecovec24_sdram_leave_start,
971 &ecovec24_sdram_leave_end);
973 /* enable STATUS0, STATUS2 and PDSTATUS */
974 gpio_request(GPIO_FN_STATUS0, NULL);
975 gpio_request(GPIO_FN_STATUS2, NULL);
976 gpio_request(GPIO_FN_PDSTATUS, NULL);
979 gpio_request(GPIO_FN_SCIF0_TXD, NULL);
980 gpio_request(GPIO_FN_SCIF0_RXD, NULL);
982 /* enable debug LED */
983 gpio_request(GPIO_PTG0, NULL);
984 gpio_request(GPIO_PTG1, NULL);
985 gpio_request(GPIO_PTG2, NULL);
986 gpio_request(GPIO_PTG3, NULL);
987 gpio_direction_output(GPIO_PTG0, 0);
988 gpio_direction_output(GPIO_PTG1, 0);
989 gpio_direction_output(GPIO_PTG2, 0);
990 gpio_direction_output(GPIO_PTG3, 0);
991 __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
994 gpio_request(GPIO_PTA1, NULL);
995 gpio_direction_output(GPIO_PTA1, 1);
998 gpio_request(GPIO_FN_RMII_RXD0, NULL);
999 gpio_request(GPIO_FN_RMII_RXD1, NULL);
1000 gpio_request(GPIO_FN_RMII_TXD0, NULL);
1001 gpio_request(GPIO_FN_RMII_TXD1, NULL);
1002 gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
1003 gpio_request(GPIO_FN_RMII_TX_EN, NULL);
1004 gpio_request(GPIO_FN_RMII_RX_ER, NULL);
1005 gpio_request(GPIO_FN_RMII_CRS_DV, NULL);
1006 gpio_request(GPIO_FN_MDIO, NULL);
1007 gpio_request(GPIO_FN_MDC, NULL);
1008 gpio_request(GPIO_FN_LNKSTA, NULL);
1011 __raw_writew(0x0000, 0xA4D80000);
1012 __raw_writew(0x0000, 0xA4D90000);
1013 gpio_request(GPIO_PTB3, NULL);
1014 gpio_request(GPIO_PTB4, NULL);
1015 gpio_request(GPIO_PTB5, NULL);
1016 gpio_direction_input(GPIO_PTB3);
1017 gpio_direction_output(GPIO_PTB4, 0);
1018 gpio_direction_output(GPIO_PTB5, 0);
1019 __raw_writew(0x0600, 0xa40501d4);
1020 __raw_writew(0x0600, 0xa4050192);
1022 if (gpio_get_value(GPIO_PTB3)) {
1023 printk(KERN_INFO "USB1 function is selected\n");
1024 usb1_common_device.name = "r8a66597_udc";
1026 printk(KERN_INFO "USB1 host is selected\n");
1027 usb1_common_device.name = "r8a66597_hcd";
1031 gpio_request(GPIO_FN_LCDD23, NULL);
1032 gpio_request(GPIO_FN_LCDD22, NULL);
1033 gpio_request(GPIO_FN_LCDD21, NULL);
1034 gpio_request(GPIO_FN_LCDD20, NULL);
1035 gpio_request(GPIO_FN_LCDD19, NULL);
1036 gpio_request(GPIO_FN_LCDD18, NULL);
1037 gpio_request(GPIO_FN_LCDD17, NULL);
1038 gpio_request(GPIO_FN_LCDD16, NULL);
1039 gpio_request(GPIO_FN_LCDD15, NULL);
1040 gpio_request(GPIO_FN_LCDD14, NULL);
1041 gpio_request(GPIO_FN_LCDD13, NULL);
1042 gpio_request(GPIO_FN_LCDD12, NULL);
1043 gpio_request(GPIO_FN_LCDD11, NULL);
1044 gpio_request(GPIO_FN_LCDD10, NULL);
1045 gpio_request(GPIO_FN_LCDD9, NULL);
1046 gpio_request(GPIO_FN_LCDD8, NULL);
1047 gpio_request(GPIO_FN_LCDD7, NULL);
1048 gpio_request(GPIO_FN_LCDD6, NULL);
1049 gpio_request(GPIO_FN_LCDD5, NULL);
1050 gpio_request(GPIO_FN_LCDD4, NULL);
1051 gpio_request(GPIO_FN_LCDD3, NULL);
1052 gpio_request(GPIO_FN_LCDD2, NULL);
1053 gpio_request(GPIO_FN_LCDD1, NULL);
1054 gpio_request(GPIO_FN_LCDD0, NULL);
1055 gpio_request(GPIO_FN_LCDDISP, NULL);
1056 gpio_request(GPIO_FN_LCDHSYN, NULL);
1057 gpio_request(GPIO_FN_LCDDCK, NULL);
1058 gpio_request(GPIO_FN_LCDVSYN, NULL);
1059 gpio_request(GPIO_FN_LCDDON, NULL);
1060 gpio_request(GPIO_FN_LCDLCLK, NULL);
1061 __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
1063 gpio_request(GPIO_PTE6, NULL);
1064 gpio_request(GPIO_PTU1, NULL);
1065 gpio_request(GPIO_PTR1, NULL);
1066 gpio_request(GPIO_PTA2, NULL);
1067 gpio_direction_input(GPIO_PTE6);
1068 gpio_direction_output(GPIO_PTU1, 0);
1069 gpio_direction_output(GPIO_PTR1, 0);
1070 gpio_direction_output(GPIO_PTA2, 0);
1072 /* I/O buffer drive ability is high */
1073 __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
1075 if (gpio_get_value(GPIO_PTE6)) {
1077 lcdc_info.clock_source = LCDC_CLK_EXTERNAL;
1078 lcdc_info.ch[0].clock_divider = 1,
1079 lcdc_info.ch[0].lcd_cfg.name = "DVI";
1080 lcdc_info.ch[0].lcd_cfg.xres = 1280;
1081 lcdc_info.ch[0].lcd_cfg.yres = 720;
1082 lcdc_info.ch[0].lcd_cfg.left_margin = 220;
1083 lcdc_info.ch[0].lcd_cfg.right_margin = 110;
1084 lcdc_info.ch[0].lcd_cfg.hsync_len = 40;
1085 lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
1086 lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
1087 lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
1089 gpio_set_value(GPIO_PTA2, 1);
1090 gpio_set_value(GPIO_PTU1, 1);
1094 lcdc_info.clock_source = LCDC_CLK_PERIPHERAL;
1095 lcdc_info.ch[0].clock_divider = 2,
1096 lcdc_info.ch[0].lcd_cfg.name = "Panel";
1097 lcdc_info.ch[0].lcd_cfg.xres = 800;
1098 lcdc_info.ch[0].lcd_cfg.yres = 480;
1099 lcdc_info.ch[0].lcd_cfg.left_margin = 220;
1100 lcdc_info.ch[0].lcd_cfg.right_margin = 110;
1101 lcdc_info.ch[0].lcd_cfg.hsync_len = 70;
1102 lcdc_info.ch[0].lcd_cfg.upper_margin = 20;
1103 lcdc_info.ch[0].lcd_cfg.lower_margin = 5;
1104 lcdc_info.ch[0].lcd_cfg.vsync_len = 5;
1106 gpio_set_value(GPIO_PTR1, 1);
1110 * LCDDON control is needed for Panel,
1111 * but current sh_mobile_lcdc driver doesn't control it.
1112 * It is temporary correspondence
1114 gpio_request(GPIO_PTF4, NULL);
1115 gpio_direction_output(GPIO_PTF4, 1);
1117 /* enable TouchScreen */
1118 i2c_register_board_info(0, &ts_i2c_clients, 1);
1119 set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
1123 gpio_request(GPIO_FN_VIO0_D15, NULL);
1124 gpio_request(GPIO_FN_VIO0_D14, NULL);
1125 gpio_request(GPIO_FN_VIO0_D13, NULL);
1126 gpio_request(GPIO_FN_VIO0_D12, NULL);
1127 gpio_request(GPIO_FN_VIO0_D11, NULL);
1128 gpio_request(GPIO_FN_VIO0_D10, NULL);
1129 gpio_request(GPIO_FN_VIO0_D9, NULL);
1130 gpio_request(GPIO_FN_VIO0_D8, NULL);
1131 gpio_request(GPIO_FN_VIO0_D7, NULL);
1132 gpio_request(GPIO_FN_VIO0_D6, NULL);
1133 gpio_request(GPIO_FN_VIO0_D5, NULL);
1134 gpio_request(GPIO_FN_VIO0_D4, NULL);
1135 gpio_request(GPIO_FN_VIO0_D3, NULL);
1136 gpio_request(GPIO_FN_VIO0_D2, NULL);
1137 gpio_request(GPIO_FN_VIO0_D1, NULL);
1138 gpio_request(GPIO_FN_VIO0_D0, NULL);
1139 gpio_request(GPIO_FN_VIO0_VD, NULL);
1140 gpio_request(GPIO_FN_VIO0_CLK, NULL);
1141 gpio_request(GPIO_FN_VIO0_FLD, NULL);
1142 gpio_request(GPIO_FN_VIO0_HD, NULL);
1143 platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20);
1146 gpio_request(GPIO_FN_VIO1_D7, NULL);
1147 gpio_request(GPIO_FN_VIO1_D6, NULL);
1148 gpio_request(GPIO_FN_VIO1_D5, NULL);
1149 gpio_request(GPIO_FN_VIO1_D4, NULL);
1150 gpio_request(GPIO_FN_VIO1_D3, NULL);
1151 gpio_request(GPIO_FN_VIO1_D2, NULL);
1152 gpio_request(GPIO_FN_VIO1_D1, NULL);
1153 gpio_request(GPIO_FN_VIO1_D0, NULL);
1154 gpio_request(GPIO_FN_VIO1_FLD, NULL);
1155 gpio_request(GPIO_FN_VIO1_HD, NULL);
1156 gpio_request(GPIO_FN_VIO1_VD, NULL);
1157 gpio_request(GPIO_FN_VIO1_CLK, NULL);
1158 platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20);
1161 gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
1162 gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
1163 gpio_request(GPIO_FN_KEYOUT3, NULL);
1164 gpio_request(GPIO_FN_KEYOUT2, NULL);
1165 gpio_request(GPIO_FN_KEYOUT1, NULL);
1166 gpio_request(GPIO_FN_KEYOUT0, NULL);
1167 gpio_request(GPIO_FN_KEYIN0, NULL);
1169 /* enable user debug switch */
1170 gpio_request(GPIO_PTR0, NULL);
1171 gpio_request(GPIO_PTR4, NULL);
1172 gpio_request(GPIO_PTR5, NULL);
1173 gpio_request(GPIO_PTR6, NULL);
1174 gpio_direction_input(GPIO_PTR0);
1175 gpio_direction_input(GPIO_PTR4);
1176 gpio_direction_input(GPIO_PTR5);
1177 gpio_direction_input(GPIO_PTR6);
1179 #ifdef CONFIG_MFD_SH_MOBILE_SDHI
1180 /* enable SDHI0 on CN11 (needs DS2.4 set to ON) */
1181 gpio_request(GPIO_FN_SDHI0CD, NULL);
1182 gpio_request(GPIO_FN_SDHI0WP, NULL);
1183 gpio_request(GPIO_FN_SDHI0CMD, NULL);
1184 gpio_request(GPIO_FN_SDHI0CLK, NULL);
1185 gpio_request(GPIO_FN_SDHI0D3, NULL);
1186 gpio_request(GPIO_FN_SDHI0D2, NULL);
1187 gpio_request(GPIO_FN_SDHI0D1, NULL);
1188 gpio_request(GPIO_FN_SDHI0D0, NULL);
1189 gpio_request(GPIO_PTB6, NULL);
1190 gpio_direction_output(GPIO_PTB6, 0);
1192 #if !defined(CONFIG_MMC_SH_MMCIF)
1193 /* enable SDHI1 on CN12 (needs DS2.6,7 set to ON,OFF) */
1194 gpio_request(GPIO_FN_SDHI1CD, NULL);
1195 gpio_request(GPIO_FN_SDHI1WP, NULL);
1196 gpio_request(GPIO_FN_SDHI1CMD, NULL);
1197 gpio_request(GPIO_FN_SDHI1CLK, NULL);
1198 gpio_request(GPIO_FN_SDHI1D3, NULL);
1199 gpio_request(GPIO_FN_SDHI1D2, NULL);
1200 gpio_request(GPIO_FN_SDHI1D1, NULL);
1201 gpio_request(GPIO_FN_SDHI1D0, NULL);
1202 gpio_request(GPIO_PTB7, NULL);
1203 gpio_direction_output(GPIO_PTB7, 0);
1205 /* I/O buffer drive ability is high for SDHI1 */
1206 __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1207 #endif /* CONFIG_MMC_SH_MMCIF */
1209 /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
1210 gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
1211 gpio_request(GPIO_FN_MSIOF0_RXD, NULL);
1212 gpio_request(GPIO_FN_MSIOF0_TSCK, NULL);
1213 gpio_request(GPIO_PTM4, NULL); /* software CS control of TSYNC pin */
1214 gpio_direction_output(GPIO_PTM4, 1); /* active low CS */
1215 gpio_request(GPIO_PTB6, NULL); /* 3.3V power control */
1216 gpio_direction_output(GPIO_PTB6, 0); /* disable power by default */
1217 gpio_request(GPIO_PTY6, NULL); /* write protect */
1218 gpio_direction_input(GPIO_PTY6);
1219 gpio_request(GPIO_PTY7, NULL); /* card detect */
1220 gpio_direction_input(GPIO_PTY7);
1222 spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
1226 gpio_request(GPIO_PTU2, NULL);
1227 gpio_direction_output(GPIO_PTU2, 1);
1230 gpio_request(GPIO_PTA3, NULL);
1231 gpio_request(GPIO_PTA4, NULL);
1232 gpio_direction_output(GPIO_PTA3, 0);
1233 gpio_direction_output(GPIO_PTA4, 0);
1236 gpio_request(GPIO_FN_FSIMCKB, NULL);
1237 gpio_request(GPIO_FN_FSIIBSD, NULL);
1238 gpio_request(GPIO_FN_FSIOBSD, NULL);
1239 gpio_request(GPIO_FN_FSIIBBCK, NULL);
1240 gpio_request(GPIO_FN_FSIIBLRCK, NULL);
1241 gpio_request(GPIO_FN_FSIOBBCK, NULL);
1242 gpio_request(GPIO_FN_FSIOBLRCK, NULL);
1243 gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
1245 /* set SPU2 clock to 83.4 MHz */
1246 clk = clk_get(NULL, "spu_clk");
1248 clk_set_rate(clk, clk_round_rate(clk, 83333333));
1252 /* change parent of FSI B */
1253 clk = clk_get(NULL, "fsib_clk");
1255 clk_register(&fsimckb_clk);
1256 clk_set_parent(clk, &fsimckb_clk);
1257 clk_set_rate(clk, 11000);
1258 clk_set_rate(&fsimckb_clk, 11000);
1262 gpio_request(GPIO_PTU0, NULL);
1263 gpio_direction_output(GPIO_PTU0, 0);
1266 /* enable motion sensor */
1267 gpio_request(GPIO_FN_INTC_IRQ1, NULL);
1268 gpio_direction_input(GPIO_FN_INTC_IRQ1);
1270 /* set VPU clock to 166 MHz */
1271 clk = clk_get(NULL, "vpu_clk");
1273 clk_set_rate(clk, clk_round_rate(clk, 166000000));
1278 gpio_request(GPIO_FN_IRDA_OUT, NULL);
1279 gpio_request(GPIO_FN_IRDA_IN, NULL);
1280 gpio_request(GPIO_PTU5, NULL);
1281 gpio_direction_output(GPIO_PTU5, 0);
1283 #if defined(CONFIG_MMC_SH_MMCIF)
1284 /* enable MMCIF (needs DS2.6,7 set to OFF,ON) */
1285 gpio_request(GPIO_FN_MMC_D7, NULL);
1286 gpio_request(GPIO_FN_MMC_D6, NULL);
1287 gpio_request(GPIO_FN_MMC_D5, NULL);
1288 gpio_request(GPIO_FN_MMC_D4, NULL);
1289 gpio_request(GPIO_FN_MMC_D3, NULL);
1290 gpio_request(GPIO_FN_MMC_D2, NULL);
1291 gpio_request(GPIO_FN_MMC_D1, NULL);
1292 gpio_request(GPIO_FN_MMC_D0, NULL);
1293 gpio_request(GPIO_FN_MMC_CLK, NULL);
1294 gpio_request(GPIO_FN_MMC_CMD, NULL);
1295 gpio_request(GPIO_PTB7, NULL);
1296 gpio_direction_output(GPIO_PTB7, 0);
1298 /* I/O buffer drive ability is high for MMCIF */
1299 __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
1302 /* enable I2C device */
1303 i2c_register_board_info(0, i2c0_devices,
1304 ARRAY_SIZE(i2c0_devices));
1306 i2c_register_board_info(1, i2c1_devices,
1307 ARRAY_SIZE(i2c1_devices));
1310 gpio_request(GPIO_FN_DV_D15, NULL);
1311 gpio_request(GPIO_FN_DV_D14, NULL);
1312 gpio_request(GPIO_FN_DV_D13, NULL);
1313 gpio_request(GPIO_FN_DV_D12, NULL);
1314 gpio_request(GPIO_FN_DV_D11, NULL);
1315 gpio_request(GPIO_FN_DV_D10, NULL);
1316 gpio_request(GPIO_FN_DV_D9, NULL);
1317 gpio_request(GPIO_FN_DV_D8, NULL);
1318 gpio_request(GPIO_FN_DV_CLKI, NULL);
1319 gpio_request(GPIO_FN_DV_CLK, NULL);
1320 gpio_request(GPIO_FN_DV_VSYNC, NULL);
1321 gpio_request(GPIO_FN_DV_HSYNC, NULL);
1323 /* AK8813 power / reset sequence */
1324 gpio_request(GPIO_PTG4, NULL);
1325 gpio_request(GPIO_PTU3, NULL);
1327 gpio_direction_output(GPIO_PTG4, 0);
1329 gpio_direction_output(GPIO_PTU3, 1);
1333 /* Power up, reset */
1334 gpio_set_value(GPIO_PTU3, 0);
1339 gpio_set_value(GPIO_PTG4, 1);
1341 return platform_add_devices(ecovec_devices,
1342 ARRAY_SIZE(ecovec_devices));
1344 arch_initcall(arch_setup);
1346 static int __init devices_setup(void)
1348 sh_eth_init(&sh_eth_plat);
1351 device_initcall(devices_setup);
1353 static struct sh_machine_vector mv_ecovec __initmv = {
1354 .mv_name = "R0P7724 (EcoVec)",