1 #include <linux/bitops.h>
2 #include <linux/delay.h>
6 #include <asm/processor-cyrix.h>
7 #include <asm/processor-flags.h>
8 #include <linux/timer.h>
9 #include <asm/pci-direct.h>
11 #include <asm/cpufeature.h>
12 #include <linux/sched.h>
13 #include <linux/sched/clock.h>
18 * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
20 static void __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
22 unsigned char ccr2, ccr3;
24 /* we test for DEVID by checking whether CCR3 is writable */
25 ccr3 = getCx86(CX86_CCR3);
26 setCx86(CX86_CCR3, ccr3 ^ 0x80);
27 getCx86(0xc0); /* dummy to change bus */
29 if (getCx86(CX86_CCR3) == ccr3) { /* no DEVID regs. */
30 ccr2 = getCx86(CX86_CCR2);
31 setCx86(CX86_CCR2, ccr2 ^ 0x04);
32 getCx86(0xc0); /* dummy */
34 if (getCx86(CX86_CCR2) == ccr2) /* old Cx486SLC/DLC */
36 else { /* Cx486S A step */
37 setCx86(CX86_CCR2, ccr2);
41 setCx86(CX86_CCR3, ccr3); /* restore CCR3 */
43 /* read DIR0 and DIR1 CPU registers */
44 *dir0 = getCx86(CX86_DIR0);
45 *dir1 = getCx86(CX86_DIR1);
49 static void do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
53 local_irq_save(flags);
54 __do_cyrix_devid(dir0, dir1);
55 local_irq_restore(flags);
58 * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
59 * order to identify the Cyrix CPU model after we're out of setup.c
61 * Actually since bugs.h doesn't even reference this perhaps someone should
62 * fix the documentation ???
64 static unsigned char Cx86_dir0_msb = 0;
66 static const char Cx86_model[][9] = {
67 "Cx486", "Cx486", "5x86 ", "6x86", "MediaGX ", "6x86MX ",
70 static const char Cx486_name[][5] = {
71 "SLC", "DLC", "SLC2", "DLC2", "SRx", "DRx",
74 static const char Cx486S_name[][4] = {
75 "S", "S2", "Se", "S2e"
77 static const char Cx486D_name[][4] = {
78 "DX", "DX2", "?", "?", "?", "DX4"
80 static char Cx86_cb[] = "?.5x Core/Bus Clock";
81 static const char cyrix_model_mult1[] = "12??43";
82 static const char cyrix_model_mult2[] = "12233445";
85 * Reset the slow-loop (SLOP) bit on the 686(L) which is set by some old
86 * BIOSes for compatibility with DOS games. This makes the udelay loop
87 * work correctly, and improves performance.
89 * FIXME: our newer udelay uses the tsc. We don't need to frob with SLOP
92 static void check_cx686_slop(struct cpuinfo_x86 *c)
96 if (Cx86_dir0_msb == 3) {
97 unsigned char ccr3, ccr5;
99 local_irq_save(flags);
100 ccr3 = getCx86(CX86_CCR3);
101 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
102 ccr5 = getCx86(CX86_CCR5);
104 setCx86(CX86_CCR5, ccr5 & 0xfd); /* reset SLOP */
105 setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
106 local_irq_restore(flags);
108 if (ccr5 & 2) { /* possible wrong calibration done */
109 pr_info("Recalibrating delay loop with SLOP bit reset\n");
111 c->loops_per_jiffy = loops_per_jiffy;
117 static void set_cx86_reorder(void)
121 pr_info("Enable Memory access reorder on Cyrix/NSC processor.\n");
122 ccr3 = getCx86(CX86_CCR3);
123 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
125 /* Load/Store Serialize to mem access disable (=reorder it) */
126 setCx86_old(CX86_PCR0, getCx86_old(CX86_PCR0) & ~0x80);
127 /* set load/store serialize from 1GB to 4GB */
129 setCx86(CX86_CCR3, ccr3);
132 static void set_cx86_memwb(void)
134 pr_info("Enable Memory-Write-back mode on Cyrix/NSC processor.\n");
136 /* CCR2 bit 2: unlock NW bit */
137 setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) & ~0x04);
138 /* set 'Not Write-through' */
139 write_cr0(read_cr0() | X86_CR0_NW);
140 /* CCR2 bit 2: lock NW bit and set WT1 */
141 setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x14);
145 * Configure later MediaGX and/or Geode processor.
148 static void geode_configure(void)
152 local_irq_save(flags);
154 /* Suspend on halt power saving and enable #SUSP pin */
155 setCx86_old(CX86_CCR2, getCx86_old(CX86_CCR2) | 0x88);
157 ccr3 = getCx86(CX86_CCR3);
158 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
161 /* FPU fast, DTE cache, Mem bypass */
162 setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x38);
163 setCx86(CX86_CCR3, ccr3); /* disable MAPEN */
168 local_irq_restore(flags);
171 static void early_init_cyrix(struct cpuinfo_x86 *c)
173 unsigned char dir0, dir0_msn, dir1 = 0;
175 __do_cyrix_devid(&dir0, &dir1);
176 dir0_msn = dir0 >> 4; /* identifies CPU "family" */
179 case 3: /* 6x86/6x86L */
180 /* Emulate MTRRs using Cyrix's ARRs. */
181 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
183 case 5: /* 6x86MX/M II */
184 /* Emulate MTRRs using Cyrix's ARRs. */
185 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
190 static void init_cyrix(struct cpuinfo_x86 *c)
192 unsigned char dir0, dir0_msn, dir0_lsn, dir1 = 0;
193 char *buf = c->x86_model_id;
194 const char *p = NULL;
197 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
198 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
200 clear_cpu_cap(c, 0*32+31);
202 /* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
203 if (test_cpu_cap(c, 1*32+24)) {
204 clear_cpu_cap(c, 1*32+24);
205 set_cpu_cap(c, X86_FEATURE_CXMMX);
208 do_cyrix_devid(&dir0, &dir1);
212 Cx86_dir0_msb = dir0_msn = dir0 >> 4; /* identifies CPU "family" */
213 dir0_lsn = dir0 & 0xf; /* model or clock multiplier */
215 /* common case step number/rev -- exceptions handled below */
216 c->x86_model = (dir1 >> 4) + 1;
217 c->x86_mask = dir1 & 0xf;
219 /* Now cook; the original recipe is by Channing Corn, from Cyrix.
220 * We do the same thing for each generation: we work out
221 * the model, multiplier and stepping. Black magic included,
222 * to make the silicon step/rev numbers match the printed ones.
228 case 0: /* Cx486SLC/DLC/SRx/DRx */
229 p = Cx486_name[dir0_lsn & 7];
232 case 1: /* Cx486S/DX/DX2/DX4 */
233 p = (dir0_lsn & 8) ? Cx486D_name[dir0_lsn & 5]
234 : Cx486S_name[dir0_lsn & 3];
238 Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
242 case 3: /* 6x86/6x86L */
244 Cx86_cb[2] = cyrix_model_mult1[dir0_lsn & 5];
245 if (dir1 > 0x21) { /* 686L */
251 /* Emulate MTRRs using Cyrix's ARRs. */
252 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
253 /* 6x86's contain this bug */
254 set_cpu_bug(c, X86_BUG_COMA);
257 case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
258 case 11: /* GX1 with inverted Device ID */
263 * It isn't really a PCI quirk directly, but the cure is the
264 * same. The MediaGX has deep magic SMM stuff that handles the
265 * SB emulation. It throws away the fifo on disable_dma() which
266 * is wrong and ruins the audio.
268 * Bug2: VSA1 has a wrap bug so that using maximum sized DMA
269 * causes bad things. According to NatSemi VSA2 has another
270 * bug to do with 'hlt'. I've not seen any boards using VSA2
271 * and X doesn't seem to support it either so who cares 8).
272 * VSA1 we work around however.
275 pr_info("Working around Cyrix MediaGX virtual DMA bugs.\n");
276 isa_dma_bridge_buggy = 2;
278 /* We do this before the PCI layer is running. However we
279 are safe here as we know the bridge must be a Cyrix
280 companion and must be present */
281 vendor = read_pci_config_16(0, 0, 0x12, PCI_VENDOR_ID);
282 device = read_pci_config_16(0, 0, 0x12, PCI_DEVICE_ID);
285 * The 5510/5520 companion chips have a funky PIT.
287 if (vendor == PCI_VENDOR_ID_CYRIX &&
288 (device == PCI_DEVICE_ID_CYRIX_5510 ||
289 device == PCI_DEVICE_ID_CYRIX_5520))
290 mark_tsc_unstable("cyrix 5510/5520 detected");
293 c->x86_cache_size = 16; /* Yep 16K integrated cache thats it */
295 /* GXm supports extended cpuid levels 'ala' AMD */
296 if (c->cpuid_level == 2) {
297 /* Enable cxMMX extensions (GX1 Datasheet 54) */
298 setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7) | 1);
301 * GXm : 0x30 ... 0x5f GXm datasheet 51
302 * GXlv: 0x6x GXlv datasheet 54
304 * GX1 : 0x8x GX1 datasheet 56
306 if ((0x30 <= dir1 && dir1 <= 0x6f) ||
307 (0x80 <= dir1 && dir1 <= 0x8f))
310 } else { /* MediaGX */
311 Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
313 c->x86_model = (dir1 & 0x20) ? 1 : 2;
317 case 5: /* 6x86MX/M II */
319 dir0_msn++; /* M II */
320 /* Enable MMX extensions (App note 108) */
321 setCx86_old(CX86_CCR7, getCx86_old(CX86_CCR7)|1);
323 /* A 6x86MX - it has the bug. */
324 set_cpu_bug(c, X86_BUG_COMA);
326 tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
327 Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
329 if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
331 /* Emulate MTRRs using Cyrix's ARRs. */
332 set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
335 case 0xf: /* Cyrix 486 without DEVID registers */
337 case 0xd: /* either a 486SLC or DLC w/o DEVID */
339 p = Cx486_name[!!boot_cpu_has(X86_FEATURE_FPU)];
342 case 0xe: /* a 486S A step */
349 default: /* unknown (shouldn't happen, we know everyone ;-) */
353 strcpy(buf, Cx86_model[dir0_msn & 7]);
360 * Handle National Semiconductor branded processors
362 static void init_nsc(struct cpuinfo_x86 *c)
365 * There may be GX1 processors in the wild that are branded
368 * This function only handles the GX processor, and kicks every
369 * thing else to the Cyrix init function above - that should
370 * cover any processors that might have been branded differently
371 * after NSC acquired Cyrix.
373 * If this breaks your GX1 horribly, please e-mail
374 * info-linux@ldcmail.amd.com to tell us.
377 /* Handle the GX (Formally known as the GX2) */
379 if (c->x86 == 5 && c->x86_model == 5)
380 cpu_detect_cache_sizes(c);
386 * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
387 * by the fact that they preserve the flags across the division of 5/2.
388 * PII and PPro exhibit this behavior too, but they have cpuid available.
392 * Perform the Cyrix 5/2 test. A Cyrix won't change
393 * the flags, while other 486 chips will.
395 static inline int test_cyrix_52div(void)
399 __asm__ __volatile__(
400 "sahf\n\t" /* clear flags (%eax = 0x0005) */
401 "div %b2\n\t" /* divide 5 by 2 */
402 "lahf" /* store flags into %ah */
407 /* AH is 0x02 on Cyrix after the divide.. */
408 return (unsigned char) (test >> 8) == 0x02;
411 static void cyrix_identify(struct cpuinfo_x86 *c)
413 /* Detect Cyrix with disabled CPUID */
414 if (c->x86 == 4 && test_cyrix_52div()) {
415 unsigned char dir0, dir1;
417 strcpy(c->x86_vendor_id, "CyrixInstead");
418 c->x86_vendor = X86_VENDOR_CYRIX;
420 /* Actually enable cpuid on the older cyrix */
422 /* Retrieve CPU revisions */
424 do_cyrix_devid(&dir0, &dir1);
428 /* Check it is an affected model */
430 if (dir0 == 5 || dir0 == 3) {
433 pr_info("Enabling CPUID on Cyrix processor.\n");
434 local_irq_save(flags);
435 ccr3 = getCx86(CX86_CCR3);
437 setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
439 setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
441 setCx86(CX86_CCR3, ccr3);
442 local_irq_restore(flags);
447 static const struct cpu_dev cyrix_cpu_dev = {
449 .c_ident = { "CyrixInstead" },
450 .c_early_init = early_init_cyrix,
451 .c_init = init_cyrix,
452 .c_identify = cyrix_identify,
453 .c_x86_vendor = X86_VENDOR_CYRIX,
456 cpu_dev_register(cyrix_cpu_dev);
458 static const struct cpu_dev nsc_cpu_dev = {
460 .c_ident = { "Geode by NSC" },
462 .c_x86_vendor = X86_VENDOR_NSC,
465 cpu_dev_register(nsc_cpu_dev);