]> git.karo-electronics.de Git - linux-beck.git/blob - arch/x86/kernel/early-quirks.c
6b839b1476441c602f32ca62ad1a87a3bc801e87
[linux-beck.git] / arch / x86 / kernel / early-quirks.c
1 /* Various workarounds for chipset bugs.
2    This code runs very early and can't use the regular PCI subsystem
3    The entries are keyed to PCI bridges which usually identify chipsets
4    uniquely.
5    This is only for whole classes of chipsets with specific problems which
6    need early invasive action (e.g. before the timers are initialized).
7    Most PCI device specific workarounds can be done later and should be
8    in standard PCI quirks
9    Mainboard specific bugs should be handled by DMI entries.
10    CPU specific bugs in setup.c */
11
12 #include <linux/pci.h>
13 #include <linux/acpi.h>
14 #include <linux/pci_ids.h>
15 #include <asm/pci-direct.h>
16 #include <asm/dma.h>
17 #include <asm/io_apic.h>
18 #include <asm/apic.h>
19 #include <asm/iommu.h>
20
21 static void __init fix_hypertransport_config(int num, int slot, int func)
22 {
23         u32 htcfg;
24         /*
25          * we found a hypertransport bus
26          * make sure that we are broadcasting
27          * interrupts to all cpus on the ht bus
28          * if we're using extended apic ids
29          */
30         htcfg = read_pci_config(num, slot, func, 0x68);
31         if (htcfg & (1 << 18)) {
32                 printk(KERN_INFO "Detected use of extended apic ids "
33                                  "on hypertransport bus\n");
34                 if ((htcfg & (1 << 17)) == 0) {
35                         printk(KERN_INFO "Enabling hypertransport extended "
36                                          "apic interrupt broadcast\n");
37                         printk(KERN_INFO "Note this is a bios bug, "
38                                          "please contact your hw vendor\n");
39                         htcfg |= (1 << 17);
40                         write_pci_config(num, slot, func, 0x68, htcfg);
41                 }
42         }
43
44
45 }
46
47 static void __init via_bugs(int  num, int slot, int func)
48 {
49 #ifdef CONFIG_GART_IOMMU
50         if ((max_pfn > MAX_DMA32_PFN ||  force_iommu) &&
51             !gart_iommu_aperture_allowed) {
52                 printk(KERN_INFO
53                        "Looks like a VIA chipset. Disabling IOMMU."
54                        " Override with iommu=allowed\n");
55                 gart_iommu_aperture_disabled = 1;
56         }
57 #endif
58 }
59
60 #ifdef CONFIG_ACPI
61 #ifdef CONFIG_X86_IO_APIC
62
63 static int __init nvidia_hpet_check(struct acpi_table_header *header)
64 {
65         return 0;
66 }
67 #endif /* CONFIG_X86_IO_APIC */
68 #endif /* CONFIG_ACPI */
69
70 static void __init nvidia_bugs(int num, int slot, int func)
71 {
72 #ifdef CONFIG_ACPI
73 #ifdef CONFIG_X86_IO_APIC
74         /*
75          * All timer overrides on Nvidia are
76          * wrong unless HPET is enabled.
77          * Unfortunately that's not true on many Asus boards.
78          * We don't know yet how to detect this automatically, but
79          * at least allow a command line override.
80          */
81         if (acpi_use_timer_override)
82                 return;
83
84         if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) {
85                 acpi_skip_timer_override = 1;
86                 printk(KERN_INFO "Nvidia board "
87                        "detected. Ignoring ACPI "
88                        "timer override.\n");
89                 printk(KERN_INFO "If you got timer trouble "
90                         "try acpi_use_timer_override\n");
91         }
92 #endif
93 #endif
94         /* RED-PEN skip them on mptables too? */
95
96 }
97
98 static u32 ati_ixp4x0_rev(int num, int slot, int func)
99 {
100         u32 d;
101         u8  b;
102
103         b = read_pci_config_byte(num, slot, func, 0xac);
104         b &= ~(1<<5);
105         write_pci_config_byte(num, slot, func, 0xac, b);
106
107         d = read_pci_config(num, slot, func, 0x70);
108         d |= 1<<8;
109         write_pci_config(num, slot, func, 0x70, d);
110
111         d = read_pci_config(num, slot, func, 0x8);
112         d &= 0xff;
113         return d;
114 }
115
116 static void __init ati_bugs(int num, int slot, int func)
117 {
118 #if defined(CONFIG_ACPI) && defined (CONFIG_X86_IO_APIC)
119         u32 d;
120         u8  b;
121
122         if (acpi_use_timer_override)
123                 return;
124
125         d = ati_ixp4x0_rev(num, slot, func);
126         if (d  < 0x82)
127                 acpi_skip_timer_override = 1;
128         else {
129                 /* check for IRQ0 interrupt swap */
130                 outb(0x72, 0xcd6); b = inb(0xcd7);
131                 if (!(b & 0x2))
132                         acpi_skip_timer_override = 1;
133         }
134
135         if (acpi_skip_timer_override) {
136                 printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
137                 printk(KERN_INFO "Ignoring ACPI timer override.\n");
138                 printk(KERN_INFO "If you got timer trouble "
139                        "try acpi_use_timer_override\n");
140         }
141 #endif
142 }
143
144 #define QFLAG_APPLY_ONCE        0x1
145 #define QFLAG_APPLIED           0x2
146 #define QFLAG_DONE              (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
147 struct chipset {
148         u32 vendor;
149         u32 device;
150         u32 class;
151         u32 class_mask;
152         u32 flags;
153         void (*f)(int num, int slot, int func);
154 };
155
156 static struct chipset early_qrk[] __initdata = {
157         { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
158           PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
159         { PCI_VENDOR_ID_VIA, PCI_ANY_ID,
160           PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, via_bugs },
161         { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
162           PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, fix_hypertransport_config },
163         { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS,
164           PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
165         {}
166 };
167
168 /**
169  * check_dev_quirk - apply early quirks to a given PCI device
170  * @num: bus number
171  * @slot: slot number
172  * @func: PCI function
173  *
174  * Check the vendor & device ID against the early quirks table.
175  *
176  * If the device is single function, let early_quirks() know so we don't
177  * poke at this device again.
178  */
179 static int __init check_dev_quirk(int num, int slot, int func)
180 {
181         u16 class;
182         u16 vendor;
183         u16 device;
184         u8 type;
185         int i;
186
187         class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
188
189         if (class == 0xffff)
190                 return -1; /* no class, treat as single function */
191
192         vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
193
194         device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
195
196         for (i = 0; early_qrk[i].f != NULL; i++) {
197                 if (((early_qrk[i].vendor == PCI_ANY_ID) ||
198                         (early_qrk[i].vendor == vendor)) &&
199                         ((early_qrk[i].device == PCI_ANY_ID) ||
200                         (early_qrk[i].device == device)) &&
201                         (!((early_qrk[i].class ^ class) &
202                             early_qrk[i].class_mask))) {
203                                 if ((early_qrk[i].flags &
204                                      QFLAG_DONE) != QFLAG_DONE)
205                                         early_qrk[i].f(num, slot, func);
206                                 early_qrk[i].flags |= QFLAG_APPLIED;
207                         }
208         }
209
210         type = read_pci_config_byte(num, slot, func,
211                                     PCI_HEADER_TYPE);
212         if (!(type & 0x80))
213                 return -1;
214
215         return 0;
216 }
217
218 void __init early_quirks(void)
219 {
220         int num, slot, func;
221
222         if (!early_pci_allowed())
223                 return;
224
225         /* Poor man's PCI discovery */
226         for (num = 0; num < 32; num++)
227                 for (slot = 0; slot < 32; slot++)
228                         for (func = 0; func < 8; func++) {
229                                 /* Only probe function 0 on single fn devices */
230                                 if (check_dev_quirk(num, slot, func))
231                                         break;
232                         }
233 }