]> git.karo-electronics.de Git - karo-tx-linux.git/blob - arch/x86/kernel/process_32.c
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
[karo-tx-linux.git] / arch / x86 / kernel / process_32.c
1 /*
2  *  Copyright (C) 1995  Linus Torvalds
3  *
4  *  Pentium III FXSR, SSE support
5  *      Gareth Hughes <gareth@valinux.com>, May 2000
6  */
7
8 /*
9  * This file handles the architecture-dependent parts of process handling..
10  */
11
12 #include <linux/cpu.h>
13 #include <linux/errno.h>
14 #include <linux/sched.h>
15 #include <linux/fs.h>
16 #include <linux/kernel.h>
17 #include <linux/mm.h>
18 #include <linux/elfcore.h>
19 #include <linux/smp.h>
20 #include <linux/stddef.h>
21 #include <linux/slab.h>
22 #include <linux/vmalloc.h>
23 #include <linux/user.h>
24 #include <linux/interrupt.h>
25 #include <linux/delay.h>
26 #include <linux/reboot.h>
27 #include <linux/mc146818rtc.h>
28 #include <linux/module.h>
29 #include <linux/kallsyms.h>
30 #include <linux/ptrace.h>
31 #include <linux/personality.h>
32 #include <linux/percpu.h>
33 #include <linux/prctl.h>
34 #include <linux/ftrace.h>
35 #include <linux/uaccess.h>
36 #include <linux/io.h>
37 #include <linux/kdebug.h>
38
39 #include <asm/pgtable.h>
40 #include <asm/ldt.h>
41 #include <asm/processor.h>
42 #include <asm/fpu/internal.h>
43 #include <asm/desc.h>
44 #ifdef CONFIG_MATH_EMULATION
45 #include <asm/math_emu.h>
46 #endif
47
48 #include <linux/err.h>
49
50 #include <asm/tlbflush.h>
51 #include <asm/cpu.h>
52 #include <asm/idle.h>
53 #include <asm/syscalls.h>
54 #include <asm/debugreg.h>
55 #include <asm/switch_to.h>
56
57 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
58 asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
59
60 /*
61  * Return saved PC of a blocked thread.
62  */
63 unsigned long thread_saved_pc(struct task_struct *tsk)
64 {
65         return ((unsigned long *)tsk->thread.sp)[3];
66 }
67
68 void __show_regs(struct pt_regs *regs, int all)
69 {
70         unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
71         unsigned long d0, d1, d2, d3, d6, d7;
72         unsigned long sp;
73         unsigned short ss, gs;
74
75         if (user_mode(regs)) {
76                 sp = regs->sp;
77                 ss = regs->ss & 0xffff;
78                 gs = get_user_gs(regs);
79         } else {
80                 sp = kernel_stack_pointer(regs);
81                 savesegment(ss, ss);
82                 savesegment(gs, gs);
83         }
84
85         printk(KERN_DEFAULT "EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
86                         (u16)regs->cs, regs->ip, regs->flags,
87                         smp_processor_id());
88         print_symbol("EIP is at %s\n", regs->ip);
89
90         printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
91                 regs->ax, regs->bx, regs->cx, regs->dx);
92         printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
93                 regs->si, regs->di, regs->bp, sp);
94         printk(KERN_DEFAULT " DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
95                (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
96
97         if (!all)
98                 return;
99
100         cr0 = read_cr0();
101         cr2 = read_cr2();
102         cr3 = read_cr3();
103         cr4 = __read_cr4_safe();
104         printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
105                         cr0, cr2, cr3, cr4);
106
107         get_debugreg(d0, 0);
108         get_debugreg(d1, 1);
109         get_debugreg(d2, 2);
110         get_debugreg(d3, 3);
111         get_debugreg(d6, 6);
112         get_debugreg(d7, 7);
113
114         /* Only print out debug registers if they are in their non-default state. */
115         if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
116             (d6 == DR6_RESERVED) && (d7 == 0x400))
117                 return;
118
119         printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
120                         d0, d1, d2, d3);
121         printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
122                         d6, d7);
123 }
124
125 void release_thread(struct task_struct *dead_task)
126 {
127         BUG_ON(dead_task->mm);
128         release_vm86_irqs(dead_task);
129 }
130
131 int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
132         unsigned long arg, struct task_struct *p, unsigned long tls)
133 {
134         struct pt_regs *childregs = task_pt_regs(p);
135         struct task_struct *tsk;
136         int err;
137
138         p->thread.sp = (unsigned long) childregs;
139         p->thread.sp0 = (unsigned long) (childregs+1);
140         memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
141
142         if (unlikely(p->flags & PF_KTHREAD)) {
143                 /* kernel thread */
144                 memset(childregs, 0, sizeof(struct pt_regs));
145                 p->thread.ip = (unsigned long) ret_from_kernel_thread;
146                 task_user_gs(p) = __KERNEL_STACK_CANARY;
147                 childregs->ds = __USER_DS;
148                 childregs->es = __USER_DS;
149                 childregs->fs = __KERNEL_PERCPU;
150                 childregs->bx = sp;     /* function */
151                 childregs->bp = arg;
152                 childregs->orig_ax = -1;
153                 childregs->cs = __KERNEL_CS | get_kernel_rpl();
154                 childregs->flags = X86_EFLAGS_IF | X86_EFLAGS_FIXED;
155                 p->thread.io_bitmap_ptr = NULL;
156                 return 0;
157         }
158         *childregs = *current_pt_regs();
159         childregs->ax = 0;
160         if (sp)
161                 childregs->sp = sp;
162
163         p->thread.ip = (unsigned long) ret_from_fork;
164         task_user_gs(p) = get_user_gs(current_pt_regs());
165
166         p->thread.io_bitmap_ptr = NULL;
167         tsk = current;
168         err = -ENOMEM;
169
170         if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
171                 p->thread.io_bitmap_ptr = kmemdup(tsk->thread.io_bitmap_ptr,
172                                                 IO_BITMAP_BYTES, GFP_KERNEL);
173                 if (!p->thread.io_bitmap_ptr) {
174                         p->thread.io_bitmap_max = 0;
175                         return -ENOMEM;
176                 }
177                 set_tsk_thread_flag(p, TIF_IO_BITMAP);
178         }
179
180         err = 0;
181
182         /*
183          * Set a new TLS for the child thread?
184          */
185         if (clone_flags & CLONE_SETTLS)
186                 err = do_set_thread_area(p, -1,
187                         (struct user_desc __user *)tls, 0);
188
189         if (err && p->thread.io_bitmap_ptr) {
190                 kfree(p->thread.io_bitmap_ptr);
191                 p->thread.io_bitmap_max = 0;
192         }
193         return err;
194 }
195
196 void
197 start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
198 {
199         set_user_gs(regs, 0);
200         regs->fs                = 0;
201         regs->ds                = __USER_DS;
202         regs->es                = __USER_DS;
203         regs->ss                = __USER_DS;
204         regs->cs                = __USER_CS;
205         regs->ip                = new_ip;
206         regs->sp                = new_sp;
207         regs->flags             = X86_EFLAGS_IF;
208         force_iret();
209 }
210 EXPORT_SYMBOL_GPL(start_thread);
211
212
213 /*
214  *      switch_to(x,y) should switch tasks from x to y.
215  *
216  * We fsave/fwait so that an exception goes off at the right time
217  * (as a call from the fsave or fwait in effect) rather than to
218  * the wrong process. Lazy FP saving no longer makes any sense
219  * with modern CPU's, and this simplifies a lot of things (SMP
220  * and UP become the same).
221  *
222  * NOTE! We used to use the x86 hardware context switching. The
223  * reason for not using it any more becomes apparent when you
224  * try to recover gracefully from saved state that is no longer
225  * valid (stale segment register values in particular). With the
226  * hardware task-switch, there is no way to fix up bad state in
227  * a reasonable manner.
228  *
229  * The fact that Intel documents the hardware task-switching to
230  * be slow is a fairly red herring - this code is not noticeably
231  * faster. However, there _is_ some room for improvement here,
232  * so the performance issues may eventually be a valid point.
233  * More important, however, is the fact that this allows us much
234  * more flexibility.
235  *
236  * The return value (in %ax) will be the "prev" task after
237  * the task-switch, and shows up in ret_from_fork in entry.S,
238  * for example.
239  */
240 __visible __notrace_funcgraph struct task_struct *
241 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
242 {
243         struct thread_struct *prev = &prev_p->thread,
244                              *next = &next_p->thread;
245         struct fpu *prev_fpu = &prev->fpu;
246         struct fpu *next_fpu = &next->fpu;
247         int cpu = smp_processor_id();
248         struct tss_struct *tss = &per_cpu(cpu_tss, cpu);
249         fpu_switch_t fpu_switch;
250
251         /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
252
253         fpu_switch = switch_fpu_prepare(prev_fpu, next_fpu, cpu);
254
255         /*
256          * Save away %gs. No need to save %fs, as it was saved on the
257          * stack on entry.  No need to save %es and %ds, as those are
258          * always kernel segments while inside the kernel.  Doing this
259          * before setting the new TLS descriptors avoids the situation
260          * where we temporarily have non-reloadable segments in %fs
261          * and %gs.  This could be an issue if the NMI handler ever
262          * used %fs or %gs (it does not today), or if the kernel is
263          * running inside of a hypervisor layer.
264          */
265         lazy_save_gs(prev->gs);
266
267         /*
268          * Load the per-thread Thread-Local Storage descriptor.
269          */
270         load_TLS(next, cpu);
271
272         /*
273          * Restore IOPL if needed.  In normal use, the flags restore
274          * in the switch assembly will handle this.  But if the kernel
275          * is running virtualized at a non-zero CPL, the popf will
276          * not restore flags, so it must be done in a separate step.
277          */
278         if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl))
279                 set_iopl_mask(next->iopl);
280
281         /*
282          * If it were not for PREEMPT_ACTIVE we could guarantee that the
283          * preempt_count of all tasks was equal here and this would not be
284          * needed.
285          */
286         task_thread_info(prev_p)->saved_preempt_count = this_cpu_read(__preempt_count);
287         this_cpu_write(__preempt_count, task_thread_info(next_p)->saved_preempt_count);
288
289         /*
290          * Now maybe handle debug registers and/or IO bitmaps
291          */
292         if (unlikely(task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV ||
293                      task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
294                 __switch_to_xtra(prev_p, next_p, tss);
295
296         /*
297          * Leave lazy mode, flushing any hypercalls made here.
298          * This must be done before restoring TLS segments so
299          * the GDT and LDT are properly updated, and must be
300          * done before fpu__restore(), so the TS bit is up
301          * to date.
302          */
303         arch_end_context_switch(next_p);
304
305         /*
306          * Reload esp0 and cpu_current_top_of_stack.  This changes
307          * current_thread_info().
308          */
309         load_sp0(tss, next);
310         this_cpu_write(cpu_current_top_of_stack,
311                        (unsigned long)task_stack_page(next_p) +
312                        THREAD_SIZE);
313
314         /*
315          * Restore %gs if needed (which is common)
316          */
317         if (prev->gs | next->gs)
318                 lazy_load_gs(next->gs);
319
320         switch_fpu_finish(next_fpu, fpu_switch);
321
322         this_cpu_write(current_task, next_p);
323
324         return prev_p;
325 }
326
327 #define top_esp                (THREAD_SIZE - sizeof(unsigned long))
328 #define top_ebp                (THREAD_SIZE - 2*sizeof(unsigned long))
329
330 unsigned long get_wchan(struct task_struct *p)
331 {
332         unsigned long bp, sp, ip;
333         unsigned long stack_page;
334         int count = 0;
335         if (!p || p == current || p->state == TASK_RUNNING)
336                 return 0;
337         stack_page = (unsigned long)task_stack_page(p);
338         sp = p->thread.sp;
339         if (!stack_page || sp < stack_page || sp > top_esp+stack_page)
340                 return 0;
341         /* include/asm-i386/system.h:switch_to() pushes bp last. */
342         bp = *(unsigned long *) sp;
343         do {
344                 if (bp < stack_page || bp > top_ebp+stack_page)
345                         return 0;
346                 ip = *(unsigned long *) (bp+4);
347                 if (!in_sched_functions(ip))
348                         return ip;
349                 bp = *(unsigned long *) bp;
350         } while (count++ < 16);
351         return 0;
352 }
353