board/amcc/yucca/yucca.c

   1 /*
   2  * (C) Copyright 2006
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  *
  23  * Port to AMCC-440SPE Evaluation Board SOP - April 2005
  24  *
  25  * PCIe supporting routines derived from Linux 440SPe PCIe driver.
  26  */
  27
  28 #include <common.h>
  29 #include <ppc4xx.h>
  30 #include <asm/processor.h>
  31 #include <i2c.h>
  32 #include <asm-ppc/io.h>
  33
  34 #include "yucca.h"
  35 #include "../cpu/ppc4xx/440spe_pcie.h"
  36
  37 #undef PCIE_ENDPOINT
  38 /* #define PCIE_ENDPOINT 1 */
  39
  40 void fpga_init (void);
  41
  42 void get_sys_info(PPC440_SYS_INFO *board_cfg );
  43 int compare_to_true(char *str );
  44 char *remove_l_w_space(char *in_str );
  45 char *remove_t_w_space(char *in_str );
  46 int get_console_port(void);
  47 unsigned long ppcMfcpr(unsigned long cpr_reg);
  48 unsigned long ppcMfsdr(unsigned long sdr_reg);
  49
  50 int ppc440spe_init_pcie_rootport(int port);
  51 void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
  52
  53 #define DEBUG_ENV
  54 #ifdef DEBUG_ENV
  55 #define DEBUGF(fmt,args...) printf(fmt ,##args)
  56 #else
  57 #define DEBUGF(fmt,args...)
  58 #endif
  59
  60 #define FALSE   0
  61 #define TRUE    1
  62
  63 int board_early_init_f (void)
  64 {
  65 /*----------------------------------------------------------------------------+
  66 | Define Boot devices
  67 +----------------------------------------------------------------------------*/
  68 #define BOOT_FROM_SMALL_FLASH           0x00
  69 #define BOOT_FROM_LARGE_FLASH_OR_SRAM   0x01
  70 #define BOOT_FROM_PCI                   0x02
  71 #define BOOT_DEVICE_UNKNOWN             0x03
  72
  73 /*----------------------------------------------------------------------------+
  74 | EBC Devices Characteristics
  75 |   Peripheral Bank Access Parameters       -   EBC_BxAP
  76 |   Peripheral Bank Configuration Register  -   EBC_BxCR
  77 +----------------------------------------------------------------------------*/
  78
  79 /*
  80  * Small Flash and FRAM
  81  * BU Value
  82  * BxAP : 0x03800000  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
  83  * B0CR : 0xff098000  - BAS = ff0 - 100 11 00 0000000000000
  84  * B2CR : 0xe7098000  - BAS = e70 - 100 11 00 0000000000000
  85  */
  86 #define EBC_BXAP_SMALL_FLASH            EBC_BXAP_BME_DISABLED   | \
  87                                         EBC_BXAP_TWT_ENCODE(7)  | \
  88                                         EBC_BXAP_BCE_DISABLE    | \
  89                                         EBC_BXAP_BCT_2TRANS     | \
  90                                         EBC_BXAP_CSN_ENCODE(0)  | \
  91                                         EBC_BXAP_OEN_ENCODE(0)  | \
  92                                         EBC_BXAP_WBN_ENCODE(0)  | \
  93                                         EBC_BXAP_WBF_ENCODE(0)  | \
  94                                         EBC_BXAP_TH_ENCODE(0)   | \
  95                                         EBC_BXAP_RE_DISABLED    | \
  96                                         EBC_BXAP_SOR_DELAYED    | \
  97                                         EBC_BXAP_BEM_WRITEONLY  | \
  98                                         EBC_BXAP_PEN_DISABLED
  99
 100 #define EBC_BXCR_SMALL_FLASH_CS0        EBC_BXCR_BAS_ENCODE(0xFF000000) | \
 101                                         EBC_BXCR_BS_16MB                | \
 102                                         EBC_BXCR_BU_RW                  | \
 103                                         EBC_BXCR_BW_8BIT
 104
 105 #define EBC_BXCR_SMALL_FLASH_CS2        EBC_BXCR_BAS_ENCODE(0xe7000000) | \
 106                                         EBC_BXCR_BS_16MB                | \
 107                                         EBC_BXCR_BU_RW                  | \
 108                                         EBC_BXCR_BW_8BIT
 109
 110 /*
 111  * Large Flash and SRAM
 112  * BU Value
 113  * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
 114  * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
 115  * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
 116 */
 117 #define EBC_BXAP_LARGE_FLASH            EBC_BXAP_BME_DISABLED   | \
 118                                         EBC_BXAP_TWT_ENCODE(7)  | \
 119                                         EBC_BXAP_BCE_DISABLE    | \
 120                                         EBC_BXAP_BCT_2TRANS     | \
 121                                         EBC_BXAP_CSN_ENCODE(0)  | \
 122                                         EBC_BXAP_OEN_ENCODE(0)  | \
 123                                         EBC_BXAP_WBN_ENCODE(0)  | \
 124                                         EBC_BXAP_WBF_ENCODE(0)  | \
 125                                         EBC_BXAP_TH_ENCODE(0)   | \
 126                                         EBC_BXAP_RE_DISABLED    | \
 127                                         EBC_BXAP_SOR_DELAYED    | \
 128                                         EBC_BXAP_BEM_WRITEONLY  | \
 129                                         EBC_BXAP_PEN_DISABLED
 130
 131 #define EBC_BXCR_LARGE_FLASH_CS0        EBC_BXCR_BAS_ENCODE(0xFF000000) | \
 132                                         EBC_BXCR_BS_16MB                | \
 133                                         EBC_BXCR_BU_RW                  | \
 134                                         EBC_BXCR_BW_16BIT
 135
 136 #define EBC_BXCR_LARGE_FLASH_CS2        EBC_BXCR_BAS_ENCODE(0xE7000000) | \
 137                                         EBC_BXCR_BS_16MB                | \
 138                                         EBC_BXCR_BU_RW                  | \
 139                                         EBC_BXCR_BW_16BIT
 140
 141 /*
 142  * FPGA
 143  * BU value :
 144  * B1AP = 0x05895240  - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
 145  * B1CR = 0xe201a000  - BAS = e20 - 000 11 01 00000000000000
 146  */
 147 #define EBC_BXAP_FPGA                   EBC_BXAP_BME_DISABLED   | \
 148                                         EBC_BXAP_TWT_ENCODE(11) | \
 149                                         EBC_BXAP_BCE_DISABLE    | \
 150                                         EBC_BXAP_BCT_2TRANS     | \
 151                                         EBC_BXAP_CSN_ENCODE(10) | \
 152                                         EBC_BXAP_OEN_ENCODE(1)  | \
 153                                         EBC_BXAP_WBN_ENCODE(1)  | \
 154                                         EBC_BXAP_WBF_ENCODE(1)  | \
 155                                         EBC_BXAP_TH_ENCODE(1)   | \
 156                                         EBC_BXAP_RE_DISABLED    | \
 157                                         EBC_BXAP_SOR_DELAYED    | \
 158                                         EBC_BXAP_BEM_RW         | \
 159                                         EBC_BXAP_PEN_DISABLED
 160
 161 #define EBC_BXCR_FPGA_CS1               EBC_BXCR_BAS_ENCODE(0xe2000000) | \
 162                                         EBC_BXCR_BS_1MB                 | \
 163                                         EBC_BXCR_BU_RW                  | \
 164                                         EBC_BXCR_BW_16BIT
 165
 166          unsigned long mfr;
 167         /*
 168          * Define Variables for EBC initialization depending on BOOTSTRAP option
 169          */
 170         unsigned long sdr0_pinstp, sdr0_sdstp1 ;
 171         unsigned long bootstrap_settings, ebc_data_width, boot_selection;
 172         int computed_boot_device = BOOT_DEVICE_UNKNOWN;
 173
 174         /*-------------------------------------------------------------------+
 175          | Initialize EBC CONFIG -
 176          | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
 177          | default value :
 178          |      0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
 179          |
 180          +-------------------------------------------------------------------*/
 181         mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
 182                         EBC_CFG_PTD_ENABLE |
 183                         EBC_CFG_RTC_16PERCLK |
 184                         EBC_CFG_ATC_PREVIOUS |
 185                         EBC_CFG_DTC_PREVIOUS |
 186                         EBC_CFG_CTC_PREVIOUS |
 187                         EBC_CFG_OEO_PREVIOUS |
 188                         EBC_CFG_EMC_DEFAULT |
 189                         EBC_CFG_PME_DISABLE |
 190                         EBC_CFG_PR_16);
 191
 192         /*-------------------------------------------------------------------+
 193          |
 194          |  PART 1 : Initialize EBC Bank 1
 195          |  ==============================
 196          | Bank1 is always associated to the EPLD.
 197          | It has to be initialized prior to other banks settings computation
 198          | since some board registers values may be needed to determine the
 199          | boot type
 200          |
 201          +-------------------------------------------------------------------*/
 202         mtebc(pb1ap, EBC_BXAP_FPGA);
 203         mtebc(pb1cr, EBC_BXCR_FPGA_CS1);
 204
 205         /*-------------------------------------------------------------------+
 206          |
 207          |  PART 2 : Determine which boot device was selected
 208          |  =================================================
 209          |
 210          |  Read Pin Strap Register in PPC440SPe
 211          |  Result can either be :
 212          |   - Boot strap = boot from EBC 8bits     => Small Flash
 213          |   - Boot strap = boot from PCI
 214          |   - Boot strap = IIC
 215          |  In case of boot from IIC, read Serial Device Strap Register1
 216          |
 217          |  Result can either be :
 218          |   - Boot from EBC  - EBC Bus Width = 8bits    => Small Flash
 219          |   - Boot from EBC  - EBC Bus Width = 16bits   => Large Flash or SRAM
 220          |   - Boot from PCI
 221          |
 222          +-------------------------------------------------------------------*/
 223         /* Read Pin Strap Register in PPC440SP */
 224         sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
 225         bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
 226
 227         switch (bootstrap_settings) {
 228                 case SDR0_PINSTP_BOOTSTRAP_SETTINGS0:
 229                         /*
 230                          * Strapping Option A
 231                          * Boot from EBC - 8 bits , Small Flash
 232                          */
 233                         computed_boot_device = BOOT_FROM_SMALL_FLASH;
 234                         break;
 235                 case SDR0_PINSTP_BOOTSTRAP_SETTINGS1:
 236                         /*
 237                          * Strappping Option B
 238                          * Boot from PCI
 239                          */
 240                         computed_boot_device = BOOT_FROM_PCI;
 241                         break;
 242                 case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN:
 243                 case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN:
 244                         /*
 245                          * Strapping Option C or D
 246                          * Boot Settings in IIC EEprom address 0x50 or 0x54
 247                          * Read Serial Device Strap Register1 in PPC440SPe
 248                          */
 249                         sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
 250                         boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
 251                         ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
 252
 253                         switch (boot_selection) {
 254                                 case SDR0_SDSTP1_ERPN_EBC:
 255                                         switch (ebc_data_width) {
 256                                                 case SDR0_SDSTP1_EBCW_16_BITS:
 257                                                         computed_boot_device =
 258                                                                 BOOT_FROM_LARGE_FLASH_OR_SRAM;
 259                                                         break;
 260                                                 case SDR0_SDSTP1_EBCW_8_BITS :
 261                                                         computed_boot_device = BOOT_FROM_SMALL_FLASH;
 262                                                         break;
 263                                         }
 264                                         break;
 265
 266                                 case SDR0_SDSTP1_ERPN_PCI:
 267                                         computed_boot_device = BOOT_FROM_PCI;
 268                                         break;
 269                                 default:
 270                                         /* should not occure */
 271                                         computed_boot_device = BOOT_DEVICE_UNKNOWN;
 272                         }
 273                         break;
 274                 default:
 275                         /* should not be */
 276                         computed_boot_device = BOOT_DEVICE_UNKNOWN;
 277                         break;
 278         }
 279
 280         /*-------------------------------------------------------------------+
 281          |
 282          |  PART 3 : Compute EBC settings depending on selected boot device
 283          |  ======   ======================================================
 284          |
 285          | Resulting EBC init will be among following configurations :
 286          |
 287          |  - Boot from EBC 8bits => boot from Small Flash selected
 288          |            EBC-CS0     = Small Flash
 289          |            EBC-CS2     = Large Flash and SRAM
 290          |
 291          |  - Boot from EBC 16bits => boot from Large Flash or SRAM
 292          |            EBC-CS0     = Large Flash or SRAM
 293          |            EBC-CS2     = Small Flash
 294          |
 295          |  - Boot from PCI
 296          |            EBC-CS0     = not initialized to avoid address contention
 297          |            EBC-CS2     = same as boot from Small Flash selected
 298          |
 299          +-------------------------------------------------------------------*/
 300         unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
 301         unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
 302
 303         switch (computed_boot_device) {
 304                 /*-------------------------------------------------------------------*/
 305                 case BOOT_FROM_PCI:
 306                 /*-------------------------------------------------------------------*/
 307                         /*
 308                          * By Default CS2 is affected to LARGE Flash
 309                          * do not initialize SMALL FLASH to avoid address contention
 310                          * Large Flash
 311                          */
 312                         ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH;
 313                         ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
 314                         break;
 315
 316                 /*-------------------------------------------------------------------*/
 317                 case BOOT_FROM_SMALL_FLASH:
 318                 /*-------------------------------------------------------------------*/
 319                         ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH;
 320                         ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0;
 321
 322                         /*
 323                          * Large Flash or SRAM
 324                          */
 325                         /* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */
 326                         ebc0_cs2_bxap_value = 0x048ff240;
 327                         ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
 328                         break;
 329
 330                 /*-------------------------------------------------------------------*/
 331                 case BOOT_FROM_LARGE_FLASH_OR_SRAM:
 332                 /*-------------------------------------------------------------------*/
 333                         ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH;
 334                         ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0;
 335
 336                         /* Small flash */
 337                         ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH;
 338                         ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2;
 339                         break;
 340
 341                 /*-------------------------------------------------------------------*/
 342                 default:
 343                 /*-------------------------------------------------------------------*/
 344                         /* BOOT_DEVICE_UNKNOWN */
 345                         break;
 346         }
 347
 348         mtebc(pb0ap, ebc0_cs0_bxap_value);
 349         mtebc(pb0cr, ebc0_cs0_bxcr_value);
 350         mtebc(pb2ap, ebc0_cs2_bxap_value);
 351         mtebc(pb2cr, ebc0_cs2_bxcr_value);
 352
 353         /*--------------------------------------------------------------------+
 354          | Interrupt controller setup for the AMCC 440SPe Evaluation board.
 355          +--------------------------------------------------------------------+
 356         +---------------------------------------------------------------------+
 357         |Interrupt| Source                            | Pol.  | Sensi.| Crit. |
 358         +---------+-----------------------------------+-------+-------+-------+
 359         | IRQ 00  | UART0                             | High  | Level | Non   |
 360         | IRQ 01  | UART1                             | High  | Level | Non   |
 361         | IRQ 02  | IIC0                              | High  | Level | Non   |
 362         | IRQ 03  | IIC1                              | High  | Level | Non   |
 363         | IRQ 04  | PCI0X0 MSG IN                     | High  | Level | Non   |
 364         | IRQ 05  | PCI0X0 CMD Write                  | High  | Level | Non   |
 365         | IRQ 06  | PCI0X0 Power Mgt                  | High  | Level | Non   |
 366         | IRQ 07  | PCI0X0 VPD Access                 | Rising| Edge  | Non   |
 367         | IRQ 08  | PCI0X0 MSI level 0                | High  | Lvl/ed| Non   |
 368         | IRQ 09  | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non   |
 369         | IRQ 10  | UIC2 Non-critical Int.            | NA    | NA    | Non   |
 370         | IRQ 11  | UIC2 Critical Interrupt           | NA    | NA    | Crit  |
 371         | IRQ 12  | PCI Express MSI Level 0           | Rising| Edge  | Non   |
 372         | IRQ 13  | PCI Express MSI Level 1           | Rising| Edge  | Non   |
 373         | IRQ 14  | PCI Express MSI Level 2           | Rising| Edge  | Non   |
 374         | IRQ 15  | PCI Express MSI Level 3           | Rising| Edge  | Non   |
 375         | IRQ 16  | UIC3 Non-critical Int.            | NA    | NA    | Non   |
 376         | IRQ 17  | UIC3 Critical Interrupt           | NA    | NA    | Crit  |
 377         | IRQ 18  | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non   |
 378         | IRQ 19  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
 379         | IRQ 20  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
 380         | IRQ 21  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
 381         | IRQ 22  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
 382         | IRQ 23  | I2O Inbound Doorbell              | High  | Level | Non   |
 383         | IRQ 24  | Inbound Post List FIFO Not Empt   | High  | Level | Non   |
 384         | IRQ 25  | I2O Region 0 LL PLB Write         | High  | Level | Non   |
 385         | IRQ 26  | I2O Region 1 LL PLB Write         | High  | Level | Non   |
 386         | IRQ 27  | I2O Region 0 HB PLB Write         | High  | Level | Non   |
 387         | IRQ 28  | I2O Region 1 HB PLB Write         | High  | Level | Non   |
 388         | IRQ 29  | GPT Down Count Timer              | Rising| Edge  | Non   |
 389         | IRQ 30  | UIC1 Non-critical Int.            | NA    | NA    | Non   |
 390         | IRQ 31  | UIC1 Critical Interrupt           | NA    | NA    | Crit. |
 391         |----------------------------------------------------------------------
 392         | IRQ 32  | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non   |
 393         | IRQ 33  | MAL Serr                          | High  | Level | Non   |
 394         | IRQ 34  | MAL Txde                          | High  | Level | Non   |
 395         | IRQ 35  | MAL Rxde                          | High  | Level | Non   |
 396         | IRQ 36  | DMC CE or DMC UE                  | High  | Level | Non   |
 397         | IRQ 37  | EBC or UART2                      | High  |Lvl Edg| Non   |
 398         | IRQ 38  | MAL TX EOB                        | High  | Level | Non   |
 399         | IRQ 39  | MAL RX EOB                        | High  | Level | Non   |
 400         | IRQ 40  | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non   |
 401         | IRQ 41  | PCIX0 MSI level 2                 | High  |Lvl Edg| Non   |
 402         | IRQ 42  | PCIX0 MSI level 3                 | High  |Lvl Edg| Non   |
 403         | IRQ 43  | L2 Cache                          | Risin | Edge  | Non   |
 404         | IRQ 44  | GPT Compare Timer 0               | Risin | Edge  | Non   |
 405         | IRQ 45  | GPT Compare Timer 1               | Risin | Edge  | Non   |
 406         | IRQ 46  | GPT Compare Timer 2               | Risin | Edge  | Non   |
 407         | IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
 408         | IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
 409         | IRQ 49  | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non   |
 410         | IRQ 50  | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non   |
 411         | IRQ 51  | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non   |
 412         | IRQ 52  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
 413         | IRQ 53  | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non   |
 414         | IRQ 54  | DMA Error                         | High  | Level | Non   |
 415         | IRQ 55  | DMA I2O Error                     | High  | Level | Non   |
 416         | IRQ 56  | Serial ROM                        | High  | Level | Non   |
 417         | IRQ 57  | PCIX0 Error                       | High  | Edge  | Non   |
 418         | IRQ 58  | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non   |
 419         | IRQ 59  | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non   |
 420         | IRQ 60  | EMAC0 Interrupt                   | High  | Level | Non   |
 421         | IRQ 61  | EMAC0 Wake-up                     | High  | Level | Non   |
 422         | IRQ 62  | Reserved                          | High  | Level | Non   |
 423         | IRQ 63  | XOR                               | High  | Level | Non   |
 424         |----------------------------------------------------------------------
 425         | IRQ 64  | PE0 AL                            | High  | Level | Non   |
 426         | IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
 427         | IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
 428         | IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
 429         | IRQ 68  | PE0 TCR                           | High  | Level | Non   |
 430         | IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
 431         | IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
 432         | IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
 433         | IRQ 72  | PE1 AL                            | High  | Level | Non   |
 434         | IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
 435         | IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
 436         | IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
 437         | IRQ 76  | PE1 TCR                           | High  | Level | Non   |
 438         | IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
 439         | IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
 440         | IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
 441         | IRQ 80  | PE2 AL                            | High  | Level | Non   |
 442         | IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
 443         | IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
 444         | IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
 445         | IRQ 84  | PE2 TCR                           | High  | Level | Non   |
 446         | IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
 447         | IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
 448         | IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
 449         | IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
 450         | IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
 451         | IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
 452         | IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
 453         | IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
 454         | IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
 455         | IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
 456         | IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
 457         |---------------------------------------------------------------------
 458         | IRQ 96  | PE0 INTA                          | High  | Level | Non   |
 459         | IRQ 97  | PE0 INTB                          | High  | Level | Non   |
 460         | IRQ 98  | PE0 INTC                          | High  | Level | Non   |
 461         | IRQ 99  | PE0 INTD                          | High  | Level | Non   |
 462         | IRQ 100 | PE1 INTA                          | High  | Level | Non   |
 463         | IRQ 101 | PE1 INTB                          | High  | Level | Non   |
 464         | IRQ 102 | PE1 INTC                          | High  | Level | Non   |
 465         | IRQ 103 | PE1 INTD                          | High  | Level | Non   |
 466         | IRQ 104 | PE2 INTA                          | High  | Level | Non   |
 467         | IRQ 105 | PE2 INTB                          | High  | Level | Non   |
 468         | IRQ 106 | PE2 INTC                          | High  | Level | Non   |
 469         | IRQ 107 | PE2 INTD                          | Risin | Edge  | Non   |
 470         | IRQ 108 | PCI Express MSI Level 4           | Risin | Edge  | Non   |
 471         | IRQ 109 | PCI Express MSI Level 5           | Risin | Edge  | Non   |
 472         | IRQ 110 | PCI Express MSI Level 6           | Risin | Edge  | Non   |
 473         | IRQ 111 | PCI Express MSI Level 7           | Risin | Edge  | Non   |
 474         | IRQ 116 | PCI Express MSI Level 12          | Risin | Edge  | Non   |
 475         | IRQ 112 | PCI Express MSI Level 8           | Risin | Edge  | Non   |
 476         | IRQ 113 | PCI Express MSI Level 9           | Risin | Edge  | Non   |
 477         | IRQ 114 | PCI Express MSI Level 10          | Risin | Edge  | Non   |
 478         | IRQ 115 | PCI Express MSI Level 11          | Risin | Edge  | Non   |
 479         | IRQ 117 | PCI Express MSI Level 13          | Risin | Edge  | Non   |
 480         | IRQ 118 | PCI Express MSI Level 14          | Risin | Edge  | Non   |
 481         | IRQ 119 | PCI Express MSI Level 15          | Risin | Edge  | Non   |
 482         | IRQ 120 | PCI Express MSI Level 16          | Risin | Edge  | Non   |
 483         | IRQ 121 | PCI Express MSI Level 17          | Risin | Edge  | Non   |
 484         | IRQ 122 | PCI Express MSI Level 18          | Risin | Edge  | Non   |
 485         | IRQ 123 | PCI Express MSI Level 19          | Risin | Edge  | Non   |
 486         | IRQ 124 | PCI Express MSI Level 20          | Risin | Edge  | Non   |
 487         | IRQ 125 | PCI Express MSI Level 21          | Risin | Edge  | Non   |
 488         | IRQ 126 | PCI Express MSI Level 22          | Risin | Edge  | Non   |
 489         | IRQ 127 | PCI Express MSI Level 23          | Risin | Edge  | Non   |
 490         +---------+-----------------------------------+-------+-------+------*/
 491         /*--------------------------------------------------------------------+
 492          | Put UICs in PowerPC440SPemode.
 493          | Initialise UIC registers.  Clear all interrupts.  Disable all
 494          | interrupts.
 495          | Set critical interrupt values.  Set interrupt polarities.  Set
 496          | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
 497          | interrupts again.
 498          +-------------------------------------------------------------------*/
 499         mtdcr (uic3sr, 0xffffffff);     /* Clear all interrupts */
 500         mtdcr (uic3er, 0x00000000);     /* disable all interrupts */
 501         mtdcr (uic3cr, 0x00000000);     /* Set Critical / Non Critical
 502                                          * interrupts */
 503         mtdcr (uic3pr, 0xffffffff);     /* Set Interrupt Polarities */
 504         mtdcr (uic3tr, 0x001fffff);     /* Set Interrupt Trigger Levels */
 505         mtdcr (uic3vr, 0x00000001);     /* Set Vect base=0,INT31 Highest
 506                                          * priority */
 507         mtdcr (uic3sr, 0x00000000);     /* clear all  interrupts */
 508         mtdcr (uic3sr, 0xffffffff);     /* clear all  interrupts */
 509
 510         mtdcr (uic2sr, 0xffffffff);     /* Clear all interrupts */
 511         mtdcr (uic2er, 0x00000000);     /* disable all interrupts */
 512         mtdcr (uic2cr, 0x00000000);     /* Set Critical / Non Critical
 513                                          * interrupts */
 514         mtdcr (uic2pr, 0xebebebff);     /* Set Interrupt Polarities */
 515         mtdcr (uic2tr, 0x74747400);     /* Set Interrupt Trigger Levels */
 516         mtdcr (uic2vr, 0x00000001);     /* Set Vect base=0,INT31 Highest
 517                                          * priority */
 518         mtdcr (uic2sr, 0x00000000);     /* clear all interrupts */
 519         mtdcr (uic2sr, 0xffffffff);     /* clear all interrupts */
 520
 521         mtdcr (uic1sr, 0xffffffff);     /* Clear all interrupts */
 522         mtdcr (uic1er, 0x00000000);     /* disable all interrupts */
 523         mtdcr (uic1cr, 0x00000000);     /* Set Critical / Non Critical
 524                                          * interrupts */
 525         mtdcr (uic1pr, 0xffffffff);     /* Set Interrupt Polarities */
 526         mtdcr (uic1tr, 0x001f8040);     /* Set Interrupt Trigger Levels */
 527         mtdcr (uic1vr, 0x00000001);     /* Set Vect base=0,INT31 Highest
 528                                          * priority */
 529         mtdcr (uic1sr, 0x00000000);     /* clear all interrupts */
 530         mtdcr (uic1sr, 0xffffffff);     /* clear all interrupts */
 531
 532         mtdcr (uic0sr, 0xffffffff);     /* Clear all interrupts */
 533         mtdcr (uic0er, 0x00000000);     /* disable all interrupts excepted
 534                                          * cascade to be checked */
 535         mtdcr (uic0cr, 0x00104001);     /* Set Critical / Non Critical
 536                                          * interrupts */
 537         mtdcr (uic0pr, 0xffffffff);     /* Set Interrupt Polarities */
 538         mtdcr (uic0tr, 0x010f0004);     /* Set Interrupt Trigger Levels */
 539         mtdcr (uic0vr, 0x00000001);     /* Set Vect base=0,INT31 Highest
 540                                          * priority */
 541         mtdcr (uic0sr, 0x00000000);     /* clear all interrupts */
 542         mtdcr (uic0sr, 0xffffffff);     /* clear all interrupts */
 543
 544         /* SDR0_MFR should be part of Ethernet init */
 545         mfsdr (sdr_mfr, mfr);
 546         mfr &= ~SDR0_MFR_ECS_MASK;
 547         /*mtsdr(sdr_mfr, mfr);*/
 548         fpga_init();
 549
 550         return 0;
 551 }
 552
 553 int checkboard (void)
 554 {
 555         char *s = getenv("serial#");
 556
 557         printf("Board: Yucca - AMCC 440SPe Evaluation Board");
 558         if (s != NULL) {
 559                 puts(", serial# ");
 560                 puts(s);
 561         }
 562         putc('\n');
 563
 564         return 0;
 565 }
 566
 567 static long int yucca_probe_for_dimms(void)
 568 {
 569         int     dimm_installed[MAXDIMMS];
 570         int     dimm_num, result;
 571         int     dimms_found = 0;
 572         uchar   dimm_addr = IIC0_DIMM0_ADDR;
 573         uchar   dimm_spd_data[MAX_SPD_BYTES];
 574
 575         for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
 576                 /* check if there is a chip at the dimm address */
 577                 switch (dimm_num) {
 578                         case 0:
 579                                 dimm_addr = IIC0_DIMM0_ADDR;
 580                                 break;
 581                         case 1:
 582                                 dimm_addr = IIC0_DIMM1_ADDR;
 583                                 break;
 584                 }
 585
 586                 result = i2c_probe(dimm_addr);
 587
 588                 memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
 589                 if (result == 0) {
 590                         /* read first byte of SPD data, if there is any data */
 591                         result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
 592
 593                         if (result == 0) {
 594                                 result = dimm_spd_data[0];
 595                                 result = result > MAX_SPD_BYTES ?
 596                                                 MAX_SPD_BYTES : result;
 597                                 result = i2c_read(dimm_addr, 0, 1,
 598                                                         dimm_spd_data, result);
 599                         }
 600                 }
 601
 602                 if ((result == 0) &&
 603                     (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
 604                         dimm_installed[dimm_num] = TRUE;
 605                         dimms_found++;
 606                         debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
 607                 } else {
 608                         dimm_installed[dimm_num] = FALSE;
 609                         debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
 610                 }
 611         }
 612
 613         if (dimms_found == 0) {
 614                 printf("ERROR - No memory installed.  Install a DDR-SDRAM DIMM.\n\n");
 615                 hang();
 616         }
 617
 618         if (dimm_installed[0] != TRUE) {
 619                 printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
 620                 printf("        Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
 621                 hang();
 622         }
 623
 624         return dimms_found;
 625 }
 626
 627 /*************************************************************************
 628  * init SDRAM controller with fixed value
 629  * the initialization values are for 2x MICRON DDR2
 630  * PN: MT18HTF6472DY-53EB2
 631  * 512MB, DDR2, 533, CL4, ECC, REG
 632  ************************************************************************/
 633 static long int fixed_sdram(void)
 634 {
 635         long int yucca_dimms = 0;
 636
 637         yucca_dimms = yucca_probe_for_dimms();
 638
 639         /* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT  */
 640         mtdcr( 0x10, 0x00000021 );
 641         mtdcr( 0x11, 0x84000000 );
 642
 643         /* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2      */
 644         mtdcr( 0x10, 0x00000020 );
 645         mtdcr( 0x11, 0x2D122000 );
 646
 647         /* SET MCIF0_CODT   Die Termination On  */
 648         mtdcr( 0x10, 0x00000026 );
 649         if (yucca_dimms == 2)
 650                 mtdcr( 0x11, 0x2A800021 );
 651         else if (yucca_dimms == 1)
 652                 mtdcr( 0x11, 0x02800021 );
 653
 654         /* On-Die Termination for Bank 0        */
 655         mtdcr( 0x10, 0x00000022 );
 656         if (yucca_dimms == 2)
 657                 mtdcr( 0x11, 0x18000000 );
 658         else if (yucca_dimms == 1)
 659                 mtdcr( 0x11, 0x06000000 );
 660
 661         /*      On-Die Termination for Bank 1   */
 662         mtdcr( 0x10, 0x00000023 );
 663         if (yucca_dimms == 2)
 664                 mtdcr( 0x11, 0x18000000 );
 665         else if (yucca_dimms == 1)
 666                 mtdcr( 0x11, 0x01800000 );
 667
 668         /*      On-Die Termination for Bank 2   */
 669         mtdcr( 0x10, 0x00000024 );
 670         if (yucca_dimms == 2)
 671                 mtdcr( 0x11, 0x01800000 );
 672         else if (yucca_dimms == 1)
 673                 mtdcr( 0x11, 0x00000000 );
 674
 675         /*      On-Die Termination for Bank 3   */
 676         mtdcr( 0x10, 0x00000025 );
 677         if (yucca_dimms == 2)
 678                 mtdcr( 0x11, 0x01800000 );
 679         else if (yucca_dimms == 1)
 680                 mtdcr( 0x11, 0x00000000 );
 681
 682         /* Refresh Time register (0x30) Refresh every 7.8125uS  */
 683         mtdcr( 0x10, 0x00000030 );
 684         mtdcr( 0x11, 0x08200000 );
 685
 686         /* SET MCIF0_MMODE       CL 4   */
 687         mtdcr( 0x10, 0x00000088 );
 688         mtdcr( 0x11, 0x00000642 );
 689
 690         /* MCIF0_MEMODE */
 691         mtdcr( 0x10, 0x00000089 );
 692         mtdcr( 0x11, 0x00000004 );
 693
 694         /*SET MCIF0_MB0CF       */
 695         mtdcr( 0x10, 0x00000040 );
 696         mtdcr( 0x11, 0x00000201 );
 697
 698         /* SET MCIF0_MB1CF      */
 699         mtdcr( 0x10, 0x00000044 );
 700         mtdcr( 0x11, 0x00000201 );
 701
 702         /* SET MCIF0_MB2CF      */
 703         mtdcr( 0x10, 0x00000048 );
 704         if (yucca_dimms == 2)
 705                 mtdcr( 0x11, 0x00000201 );
 706         else if (yucca_dimms == 1)
 707                 mtdcr( 0x11, 0x00000000 );
 708
 709         /* SET MCIF0_MB3CF      */
 710         mtdcr( 0x10, 0x0000004c );
 711         if (yucca_dimms == 2)
 712                 mtdcr( 0x11, 0x00000201 );
 713         else if (yucca_dimms == 1)
 714                 mtdcr( 0x11, 0x00000000 );
 715
 716         /* SET MCIF0_INITPLR0  # NOP            */
 717         mtdcr( 0x10, 0x00000050 );
 718         mtdcr( 0x11, 0xB5380000 );
 719
 720         /* SET MCIF0_INITPLR1  # PRE            */
 721         mtdcr( 0x10, 0x00000051 );
 722         mtdcr( 0x11, 0x82100400 );
 723
 724         /* SET MCIF0_INITPLR2  # EMR2           */
 725         mtdcr( 0x10, 0x00000052 );
 726         mtdcr( 0x11, 0x80820000 );
 727
 728         /* SET MCIF0_INITPLR3  # EMR3           */
 729         mtdcr( 0x10, 0x00000053 );
 730         mtdcr( 0x11, 0x80830000 );
 731
 732         /* SET MCIF0_INITPLR4  # EMR DLL ENABLE */
 733         mtdcr( 0x10, 0x00000054 );
 734         mtdcr( 0x11, 0x80810000 );
 735
 736         /* SET MCIF0_INITPLR5  # MR DLL RESET   */
 737         mtdcr( 0x10, 0x00000055 );
 738         mtdcr( 0x11, 0x80800542 );
 739
 740         /* SET MCIF0_INITPLR6  # PRE            */
 741         mtdcr( 0x10, 0x00000056 );
 742         mtdcr( 0x11, 0x82100400 );
 743
 744         /* SET MCIF0_INITPLR7  # Refresh        */
 745         mtdcr( 0x10, 0x00000057 );
 746         mtdcr( 0x11, 0x8A080000 );
 747
 748         /* SET MCIF0_INITPLR8  # Refresh        */
 749         mtdcr( 0x10, 0x00000058 );
 750         mtdcr( 0x11, 0x8A080000 );
 751
 752         /* SET MCIF0_INITPLR9  # Refresh        */
 753         mtdcr( 0x10, 0x00000059 );
 754         mtdcr( 0x11, 0x8A080000 );
 755
 756         /* SET MCIF0_INITPLR10 # Refresh        */
 757         mtdcr( 0x10, 0x0000005A );
 758         mtdcr( 0x11, 0x8A080000 );
 759
 760         /* SET MCIF0_INITPLR11 # MR             */
 761         mtdcr( 0x10, 0x0000005B );
 762         mtdcr( 0x11, 0x80800442 );
 763
 764         /* SET MCIF0_INITPLR12 # EMR OCD Default*/
 765         mtdcr( 0x10, 0x0000005C );
 766         mtdcr( 0x11, 0x80810380 );
 767
 768         /* SET MCIF0_INITPLR13 # EMR OCD Exit   */
 769         mtdcr( 0x10, 0x0000005D );
 770         mtdcr( 0x11, 0x80810000 );
 771
 772         /* 0x80: Adv Addr clock by 180 deg      */
 773         mtdcr( 0x10, 0x00000080 );
 774         mtdcr( 0x11, 0x80000000 );
 775
 776         /* 0x21: Exit self refresh, set DC_EN   */
 777         mtdcr( 0x10, 0x00000021 );
 778         mtdcr( 0x11, 0x28000000 );
 779
 780         /* 0x81: Write DQS Adv 90 + Fractional DQS Delay        */
 781         mtdcr( 0x10, 0x00000081 );
 782         mtdcr( 0x11, 0x80000800 );
 783
 784         /* MCIF0_SDTR1  */
 785         mtdcr( 0x10, 0x00000085 );
 786         mtdcr( 0x11, 0x80201000 );
 787
 788         /* MCIF0_SDTR2  */
 789         mtdcr( 0x10, 0x00000086 );
 790         mtdcr( 0x11, 0x42103242 );
 791
 792         /* MCIF0_SDTR3  */
 793         mtdcr( 0x10, 0x00000087 );
 794         mtdcr( 0x11, 0x0C100D14 );
 795
 796         /* SET MQ0_B0BAS  base addr 00000000 / 256MB    */
 797         mtdcr( 0x40, 0x0000F800 );
 798
 799         /* SET MQ0_B1BAS  base addr 10000000 / 256MB    */
 800         mtdcr( 0x41, 0x0400F800 );
 801
 802         /* SET MQ0_B2BAS  base addr 20000000 / 256MB    */
 803         if (yucca_dimms == 2)
 804                 mtdcr( 0x42, 0x0800F800 );
 805         else if (yucca_dimms == 1)
 806                 mtdcr( 0x42, 0x00000000 );
 807
 808         /* SET MQ0_B3BAS  base addr 30000000 / 256MB    */
 809         if (yucca_dimms == 2)
 810                 mtdcr( 0x43, 0x0C00F800 );
 811         else if (yucca_dimms == 1)
 812                 mtdcr( 0x43, 0x00000000 );
 813
 814         /* SDRAM_RQDC   */
 815         mtdcr( 0x10, 0x00000070 );
 816         mtdcr( 0x11, 0x8000003F );
 817
 818         /* SDRAM_RDCC   */
 819         mtdcr( 0x10, 0x00000078 );
 820         mtdcr( 0x11, 0x80000000 );
 821
 822         /* SDRAM_RFDC   */
 823         mtdcr( 0x10, 0x00000074 );
 824         mtdcr( 0x11, 0x00000220 );
 825
 826         return (yucca_dimms * 512) << 20;
 827 }
 828
 829 long int initdram (int board_type)
 830 {
 831         long dram_size = 0;
 832
 833         dram_size = fixed_sdram();
 834
 835         return dram_size;
 836 }
 837
 838 #if defined(CFG_DRAM_TEST)
 839 int testdram (void)
 840 {
 841         uint *pstart = (uint *) 0x00000000;
 842         uint *pend = (uint *) 0x08000000;
 843         uint *p;
 844
 845         for (p = pstart; p < pend; p++)
 846                 *p = 0xaaaaaaaa;
 847
 848         for (p = pstart; p < pend; p++) {
 849                 if (*p != 0xaaaaaaaa) {
 850                         printf ("SDRAM test fails at: %08x\n", (uint) p);
 851                         return 1;
 852                 }
 853         }
 854
 855         for (p = pstart; p < pend; p++)
 856                 *p = 0x55555555;
 857
 858         for (p = pstart; p < pend; p++) {
 859                 if (*p != 0x55555555) {
 860                         printf ("SDRAM test fails at: %08x\n", (uint) p);
 861                         return 1;
 862                 }
 863         }
 864         return 0;
 865 }
 866 #endif
 867
 868 /*************************************************************************
 869  *  pci_pre_init
 870  *
 871  *  This routine is called just prior to registering the hose and gives
 872  *  the board the opportunity to check things. Returning a value of zero
 873  *  indicates that things are bad & PCI initialization should be aborted.
 874  *
 875  *      Different boards may wish to customize the pci controller structure
 876  *      (add regions, override default access routines, etc) or perform
 877  *      certain pre-initialization actions.
 878  *
 879  ************************************************************************/
 880 #if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
 881 int pci_pre_init(struct pci_controller * hose )
 882 {
 883         unsigned long strap;
 884
 885         /*-------------------------------------------------------------------+
 886          *      The yucca board is always configured as the host & requires the
 887          *      PCI arbiter to be enabled.
 888          *-------------------------------------------------------------------*/
 889         mfsdr(sdr_sdstp1, strap);
 890         if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
 891                 printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
 892                 return 0;
 893         }
 894
 895         return 1;
 896 }
 897 #endif  /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
 898
 899 /*************************************************************************
 900  *  pci_target_init
 901  *
 902  *      The bootstrap configuration provides default settings for the pci
 903  *      inbound map (PIM). But the bootstrap config choices are limited and
 904  *      may not be sufficient for a given board.
 905  *
 906  ************************************************************************/
 907 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 908 void pci_target_init(struct pci_controller * hose )
 909 {
 910         DECLARE_GLOBAL_DATA_PTR;
 911
 912         /*-------------------------------------------------------------------+
 913          * Disable everything
 914          *-------------------------------------------------------------------*/
 915         out32r( PCIX0_PIM0SA, 0 ); /* disable */
 916         out32r( PCIX0_PIM1SA, 0 ); /* disable */
 917         out32r( PCIX0_PIM2SA, 0 ); /* disable */
 918         out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
 919
 920         /*-------------------------------------------------------------------+
 921          * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
 922          * strapping options to not support sizes such as 128/256 MB.
 923          *-------------------------------------------------------------------*/
 924         out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
 925         out32r( PCIX0_PIM0LAH, 0 );
 926         out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
 927         out32r( PCIX0_BAR0, 0 );
 928
 929         /*-------------------------------------------------------------------+
 930          * Program the board's subsystem id/vendor id
 931          *-------------------------------------------------------------------*/
 932         out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
 933         out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
 934
 935         out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
 936 }
 937 #endif  /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 938
 939 #if defined(CONFIG_PCI)
 940 /*************************************************************************
 941  *  is_pci_host
 942  *
 943  *      This routine is called to determine if a pci scan should be
 944  *      performed. With various hardware environments (especially cPCI and
 945  *      PPMC) it's insufficient to depend on the state of the arbiter enable
 946  *      bit in the strap register, or generic host/adapter assumptions.
 947  *
 948  *      Rather than hard-code a bad assumption in the general 440 code, the
 949  *      440 pci code requires the board to decide at runtime.
 950  *
 951  *      Return 0 for adapter mode, non-zero for host (monarch) mode.
 952  *
 953  *
 954  ************************************************************************/
 955 int is_pci_host(struct pci_controller *hose)
 956 {
 957         /* The yucca board is always configured as host. */
 958         return 1;
 959 }
 960
 961 int yucca_pcie_card_present(int port)
 962 {
 963         u16 reg;
 964
 965         reg = in_be16((u16 *)FPGA_REG1C);
 966         switch(port) {
 967         case 0:
 968                 return !(reg & FPGA_REG1C_PE0_PRSNT);
 969         case 1:
 970                 return !(reg & FPGA_REG1C_PE1_PRSNT);
 971         case 2:
 972                 return !(reg & FPGA_REG1C_PE2_PRSNT);
 973         default:
 974                 return 0;
 975         }
 976 }
 977
 978 /*
 979  * For the given slot, set rootpoint mode, send power to the slot,
 980  * turn on the green LED and turn off the yellow LED, enable the clock
 981  * and turn off reset.
 982  */
 983 void yucca_setup_pcie_fpga_rootpoint(int port)
 984 {
 985         u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
 986
 987         switch(port) {
 988         case 0:
 989                 rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
 990                 endpoint    = 0;
 991                 power       = FPGA_REG1A_PE0_PWRON;
 992                 green_led   = FPGA_REG1A_PE0_GLED;
 993                 clock       = FPGA_REG1A_PE0_REFCLK_ENABLE;
 994                 yellow_led  = FPGA_REG1A_PE0_YLED;
 995                 reset_off   = FPGA_REG1C_PE0_PERST;
 996                 break;
 997         case 1:
 998                 rootpoint   = 0;
 999                 endpoint    = FPGA_REG1C_PE1_ENDPOINT;
1000                 power       = FPGA_REG1A_PE1_PWRON;
1001                 green_led   = FPGA_REG1A_PE1_GLED;
1002                 clock       = FPGA_REG1A_PE1_REFCLK_ENABLE;
1003                 yellow_led  = FPGA_REG1A_PE1_YLED;
1004                 reset_off   = FPGA_REG1C_PE1_PERST;
1005                 break;
1006         case 2:
1007                 rootpoint   = 0;
1008                 endpoint    = FPGA_REG1C_PE2_ENDPOINT;
1009                 power       = FPGA_REG1A_PE2_PWRON;
1010                 green_led   = FPGA_REG1A_PE2_GLED;
1011                 clock       = FPGA_REG1A_PE2_REFCLK_ENABLE;
1012                 yellow_led  = FPGA_REG1A_PE2_YLED;
1013                 reset_off   = FPGA_REG1C_PE2_PERST;
1014                 break;
1015
1016         default:
1017                 return;
1018         }
1019
1020         out_be16((u16 *)FPGA_REG1A,
1021                  ~(power | clock | green_led) &
1022                  (yellow_led | in_be16((u16 *)FPGA_REG1A)));
1023
1024         out_be16((u16 *)FPGA_REG1C,
1025                  ~(endpoint | reset_off) &
1026                  (rootpoint | in_be16((u16 *)FPGA_REG1C)));
1027         /*
1028          * Leave device in reset for a while after powering on the
1029          * slot to give it a chance to initialize.
1030          */
1031         udelay(250 * 1000);
1032
1033         out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
1034 }
1035 /*
1036  * For the given slot, set endpoint mode, send power to the slot,
1037  * turn on the green LED and turn off the yellow LED, enable the clock
1038  * .In end point mode reset bit is  read only.
1039  */
1040 void yucca_setup_pcie_fpga_endpoint(int port)
1041 {
1042         u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
1043
1044         switch(port) {
1045         case 0:
1046                 rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
1047                 endpoint    = 0;
1048                 power       = FPGA_REG1A_PE0_PWRON;
1049                 green_led   = FPGA_REG1A_PE0_GLED;
1050                 clock       = FPGA_REG1A_PE0_REFCLK_ENABLE;
1051                 yellow_led  = FPGA_REG1A_PE0_YLED;
1052                 reset_off   = FPGA_REG1C_PE0_PERST;
1053                 break;
1054         case 1:
1055                 rootpoint   = 0;
1056                 endpoint    = FPGA_REG1C_PE1_ENDPOINT;
1057                 power       = FPGA_REG1A_PE1_PWRON;
1058                 green_led   = FPGA_REG1A_PE1_GLED;
1059                 clock       = FPGA_REG1A_PE1_REFCLK_ENABLE;
1060                 yellow_led  = FPGA_REG1A_PE1_YLED;
1061                 reset_off   = FPGA_REG1C_PE1_PERST;
1062                 break;
1063         case 2:
1064                 rootpoint   = 0;
1065                 endpoint    = FPGA_REG1C_PE2_ENDPOINT;
1066                 power       = FPGA_REG1A_PE2_PWRON;
1067                 green_led   = FPGA_REG1A_PE2_GLED;
1068                 clock       = FPGA_REG1A_PE2_REFCLK_ENABLE;
1069                 yellow_led  = FPGA_REG1A_PE2_YLED;
1070                 reset_off   = FPGA_REG1C_PE2_PERST;
1071                 break;
1072
1073         default:
1074                 return;
1075         }
1076
1077         out_be16((u16 *)FPGA_REG1A,
1078                  ~(power | clock | green_led) &
1079                  (yellow_led | in_be16((u16 *)FPGA_REG1A)));
1080
1081         out_be16((u16 *)FPGA_REG1C,
1082                  ~(rootpoint | reset_off) &
1083                  (endpoint | in_be16((u16 *)FPGA_REG1C)));
1084 }
1085
1086 static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
1087
1088 void pcie_setup_hoses(void)
1089 {
1090         struct pci_controller *hose;
1091         int i, bus;
1092
1093         /*
1094          * assume we're called after the PCIX hose is initialized, which takes
1095          * bus ID 0 and therefore start numbering PCIe's from 1.
1096          */
1097         bus = 1;
1098         for (i = 0; i <= 2; i++) {
1099                 /* Check for yucca card presence */
1100                 if (!yucca_pcie_card_present(i))
1101                         continue;
1102
1103 #ifdef PCIE_ENDPOINT
1104                 yucca_setup_pcie_fpga_endpoint(i);
1105                 if (ppc440spe_init_pcie_endport(i)) {
1106 #else
1107                 yucca_setup_pcie_fpga_rootpoint(i);
1108                 if (ppc440spe_init_pcie_rootport(i)) {
1109 #endif
1110                         printf("PCIE%d: initialization failed\n", i);
1111                         continue;
1112                 }
1113
1114                 hose = &pcie_hose[i];
1115                 hose->first_busno = bus;
1116                 hose->last_busno  = bus;
1117                 bus++;
1118
1119                 /* setup mem resource */
1120                 pci_set_region(hose->regions + 0,
1121                         CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
1122                         CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
1123                         CFG_PCIE_MEMSIZE,
1124                         PCI_REGION_MEM
1125                         );
1126                 hose->region_count = 1;
1127                 pci_register_hose(hose);
1128
1129 #ifdef PCIE_ENDPOINT
1130                 ppc440spe_setup_pcie_endpoint(hose, i);
1131                 /*
1132                  * Reson for no scanning is endpoint can not generate
1133                  * upstream configuration accesses.
1134                  */
1135 #else
1136                 ppc440spe_setup_pcie_rootpoint(hose, i);
1137                 /*
1138                  * Config access can only go down stream
1139                  */
1140                 hose->last_busno = pci_hose_scan(hose);
1141 #endif
1142         }
1143 }
1144 #endif  /* defined(CONFIG_PCI) */
1145
1146 int misc_init_f (void)
1147 {
1148         uint reg;
1149 #if defined(CONFIG_STRESS)
1150         uint i ;
1151         uint disp;
1152 #endif
1153
1154         out16(FPGA_REG10, (in16(FPGA_REG10) &
1155                         ~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) |
1156                                 FPGA_REG10_10MHZ_ENABLE |
1157                                 FPGA_REG10_100MHZ_ENABLE |
1158                                 FPGA_REG10_GIGABIT_ENABLE |
1159                                 FPGA_REG10_FULL_DUPLEX );
1160
1161         udelay(10000);  /* wait 10ms */
1162
1163         out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH));
1164
1165         /* minimal init for PCIe */
1166         /* pci express 0 Endpoint Mode */
1167         mfsdr(SDR0_PE0DLPSET, reg);
1168         reg &= (~0x00400000);
1169         mtsdr(SDR0_PE0DLPSET, reg);
1170         /* pci express 1 Rootpoint  Mode */
1171         mfsdr(SDR0_PE1DLPSET, reg);
1172         reg |= 0x00400000;
1173         mtsdr(SDR0_PE1DLPSET, reg);
1174         /* pci express 2 Rootpoint  Mode */
1175         mfsdr(SDR0_PE2DLPSET, reg);
1176         reg |= 0x00400000;
1177         mtsdr(SDR0_PE2DLPSET, reg);
1178
1179         out16(FPGA_REG1C,(in16 (FPGA_REG1C) &
1180                                 ~FPGA_REG1C_PE0_ROOTPOINT &
1181                                 ~FPGA_REG1C_PE1_ENDPOINT  &
1182                                 ~FPGA_REG1C_PE2_ENDPOINT));
1183
1184 #if defined(CONFIG_STRESS)
1185         /*
1186          * all this setting done by linux only needed by stress an charac. test
1187          * procedure
1188          * PCIe 1 Rootpoint PCIe2 Endpoint
1189          * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver
1190          * Power Level
1191          */
1192         for (i = 0, disp = 0; i < 8; i++, disp += 3) {
1193                 mfsdr(SDR0_PE0HSSSET1L0 + disp, reg);
1194                 reg |= 0x33000000;
1195                 mtsdr(SDR0_PE0HSSSET1L0 + disp, reg);
1196         }
1197
1198         /*
1199          * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver
1200          * Power Level
1201          */
1202         for (i = 0, disp = 0; i < 4; i++, disp += 3) {
1203                 mfsdr(SDR0_PE1HSSSET1L0 + disp, reg);
1204                 reg |= 0x33000000;
1205                 mtsdr(SDR0_PE1HSSSET1L0 + disp, reg);
1206         }
1207
1208         /*
1209          * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver
1210          * Power Level
1211          */
1212         for (i = 0, disp = 0; i < 4; i++, disp += 3) {
1213                 mfsdr(SDR0_PE2HSSSET1L0 + disp, reg);
1214                 reg |= 0x33000000;
1215                 mtsdr(SDR0_PE2HSSSET1L0 + disp, reg);
1216         }
1217
1218         reg = 0x21242222;
1219         mtsdr(SDR0_PE2UTLSET1, reg);
1220         reg = 0x11000000;
1221         mtsdr(SDR0_PE2UTLSET2, reg);
1222         /* pci express 1 Endpoint  Mode */
1223         reg = 0x00004000;
1224         mtsdr(SDR0_PE2DLPSET, reg);
1225
1226         mtsdr(SDR0_UART1, 0x2080005a);  /* patch for TG */
1227 #endif
1228         return 0;
1229 }
1230
1231 void fpga_init(void)
1232 {
1233         /*
1234          * by default sdram access is disabled by fpga
1235          */
1236         out16(FPGA_REG10, (in16 (FPGA_REG10) |
1237                                 FPGA_REG10_SDRAM_ENABLE |
1238                                 FPGA_REG10_ENABLE_DISPLAY ));
1239
1240         return;
1241 }
1242
1243 #ifdef CONFIG_POST
1244 /*
1245  * Returns 1 if keys pressed to start the power-on long-running tests
1246  * Called from board_init_f().
1247  */
1248 int post_hotkeys_pressed(void)
1249 {
1250         return (ctrlc());
1251 }
1252 #endif
1253
1254 /*---------------------------------------------------------------------------+
1255  | onboard_pci_arbiter_selected => from EPLD
1256  +---------------------------------------------------------------------------*/
1257 int onboard_pci_arbiter_selected(int core_pci)
1258 {
1259 #if 0
1260         unsigned long onboard_pci_arbiter_sel;
1261
1262         onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK;
1263
1264         if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL)
1265                 return (BOARD_OPTION_SELECTED);
1266         else
1267 #endif
1268         return (BOARD_OPTION_NOT_SELECTED);
1269 }
1270
1271 /*---------------------------------------------------------------------------+
1272  | ppcMfcpr.
1273  +---------------------------------------------------------------------------*/
1274 unsigned long ppcMfcpr(unsigned long cpr_reg)
1275 {
1276         unsigned long msr;
1277         unsigned long cpr_cfgaddr_temp;
1278         unsigned long cpr_value;
1279
1280         msr = (mfmsr () & ~(MSR_EE));
1281         cpr_cfgaddr_temp =  mfdcr(CPR0_CFGADDR);
1282         mtdcr(CPR0_CFGADDR, cpr_reg);
1283         cpr_value =  mfdcr(CPR0_CFGDATA);
1284         mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
1285         mtmsr(msr);
1286
1287         return (cpr_value);
1288 }
1289
1290 /*----------------------------------------------------------------------------+
1291 | Indirect Access of the System DCR's (SDR)
1292 | ppcMfsdr
1293 +----------------------------------------------------------------------------*/
1294 unsigned long ppcMfsdr(unsigned long sdr_reg)
1295 {
1296         unsigned long msr;
1297         unsigned long sdr_cfgaddr_temp;
1298         unsigned long sdr_value;
1299
1300         msr = (mfmsr () & ~(MSR_EE));
1301         sdr_cfgaddr_temp =  mfdcr(SDR0_CFGADDR);
1302         mtdcr(SDR0_CFGADDR, sdr_reg);
1303         sdr_value =  mfdcr(SDR0_CFGDATA);
1304         mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
1305         mtmsr(msr);
1306
1307         return (sdr_value);
1308 }