3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28 #include <asm/mpc8349_pci.h>
32 #if defined(CONFIG_SPD_EEPROM)
33 #include <spd_sdram.h>
35 #if defined(CONFIG_OF_LIBFDT)
39 int fixed_sdram(void);
40 void sdram_init(void);
42 #if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
43 void ddr_enable_ecc(unsigned int dram_size);
46 int board_early_init_f (void)
48 volatile u8* bcsr = (volatile u8*)CFG_BCSR;
50 /* Enable flash write */
53 #ifdef CFG_USE_MPC834XSYS_USB_PHY
54 /* Use USB PHY on SYS board */
61 #define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
63 long int initdram (int board_type)
65 volatile immap_t *im = (immap_t *)CFG_IMMR;
68 if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
71 /* DDR SDRAM - Main SODIMM */
72 im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
73 #if defined(CONFIG_SPD_EEPROM)
76 msize = fixed_sdram();
79 * Initialize SDRAM if it is on local bus.
83 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
85 * Initialize and enable DDR ECC.
87 ddr_enable_ecc(msize * 1024 * 1024);
90 /* return total bus SDRAM size(bytes) -- DDR */
91 return (msize * 1024 * 1024);
94 #if !defined(CONFIG_SPD_EEPROM)
95 /*************************************************************************
96 * fixed sdram init -- doesn't use serial presence detect.
97 ************************************************************************/
100 volatile immap_t *im = (immap_t *)CFG_IMMR;
105 msize = CFG_DDR_SIZE;
106 for (ddr_size = msize << 20, ddr_size_log2 = 0;
108 ddr_size = ddr_size>>1, ddr_size_log2++) {
113 im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
114 im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
116 #if (CFG_DDR_SIZE != 256)
117 #warning Currenly any ddr size other than 256 is not supported
120 im->ddr.csbnds[2].csbnds = CFG_DDR_CS2_BNDS;
121 im->ddr.cs_config[2] = CFG_DDR_CS2_CONFIG;
122 im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
123 im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
124 im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
125 im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
126 im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
127 im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
128 im->ddr.sdram_mode = CFG_DDR_MODE;
129 im->ddr.sdram_mode2 = CFG_DDR_MODE2;
130 im->ddr.sdram_interval = CFG_DDR_INTERVAL;
131 im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
133 im->ddr.csbnds[2].csbnds = 0x0000000f;
134 im->ddr.cs_config[2] = CFG_DDR_CONFIG;
136 /* currently we use only one CS, so disable the other banks */
137 im->ddr.cs_config[0] = 0;
138 im->ddr.cs_config[1] = 0;
139 im->ddr.cs_config[3] = 0;
141 im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
142 im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
146 #if defined(CONFIG_DDR_2T_TIMING)
149 | 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
150 #if defined (CONFIG_DDR_32BIT)
151 /* for 32-bit mode burst length is 8 */
152 im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
154 im->ddr.sdram_mode = CFG_DDR_MODE;
156 im->ddr.sdram_interval = CFG_DDR_INTERVAL;
160 /* enable DDR controller */
161 im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
164 #endif/*!CFG_SPD_EEPROM*/
167 int checkboard (void)
169 puts("Board: Freescale MPC8349EMDS\n");
174 * if MPC8349EMDS is soldered with SDRAM
176 #if defined(CFG_BR2_PRELIM) \
177 && defined(CFG_OR2_PRELIM) \
178 && defined(CFG_LBLAWBAR2_PRELIM) \
179 && defined(CFG_LBLAWAR2_PRELIM)
181 * Initialize SDRAM memory on the Local Bus.
184 void sdram_init(void)
186 volatile immap_t *immap = (immap_t *)CFG_IMMR;
187 volatile lbus83xx_t *lbc= &immap->lbus;
188 uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
191 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
194 /* setup mtrpt, lsrt and lbcr for LB bus */
195 lbc->lbcr = CFG_LBC_LBCR;
196 lbc->mrtpr = CFG_LBC_MRTPR;
197 lbc->lsrt = CFG_LBC_LSRT;
201 * Configure the SDRAM controller Machine Mode Register.
203 lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
205 lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
210 lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
237 /* 0x58636733; mode register write operation */
238 lbc->lsdmr = CFG_LBC_LSDMR_4;
243 lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
249 void sdram_init(void)
254 #if defined(CONFIG_OF_BOARD_SETUP)
255 void ft_board_setup(void *blob, bd_t *bd)
257 ft_cpu_setup(blob, bd);
259 ft_pci_setup(blob, bd);