]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - board/logicpd/imx31_litekit/imx31_litekit.c
arm: move Logicpd's boards to board/logicpd/
[karo-tx-uboot.git] / board / logicpd / imx31_litekit / imx31_litekit.c
1 /*
2  *
3  * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24
25 #include <common.h>
26 #include <netdev.h>
27 #include <asm/arch/mx31.h>
28 #include <asm/arch/mx31-regs.h>
29
30 DECLARE_GLOBAL_DATA_PTR;
31
32 int dram_init (void)
33 {
34         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
35         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
36
37         return 0;
38 }
39
40 int board_init (void)
41 {
42         __REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
43         __REG(CSCR_L(0)) = 0xa0330d01;
44         __REG(CSCR_A(0)) = 0x00220800;
45
46         __REG(CSCR_U(4)) = 0x0000dcf6; /* CS4: Network Controller */
47         __REG(CSCR_L(4)) = 0x444a4541;
48         __REG(CSCR_A(4)) = 0x44443302;
49
50         /* setup pins for UART1 */
51         mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
52         mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
53         mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
54         mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
55
56         /* SPI2 */
57         mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
58         mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
59         mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
60         mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
61         mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
62         mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
63         mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
64
65         /* start SPI2 clock */
66         __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
67
68         gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
69         gd->bd->bi_boot_params = (0x80000100);  /* adress of boot parameters */
70
71         return 0;
72 }
73
74 int checkboard (void)
75 {
76         printf("Board: i.MX31 Litekit\n");
77         return 0;
78 }
79
80 int board_eth_init(bd_t *bis)
81 {
82         int rc = 0;
83 #ifdef CONFIG_SMC911X
84         rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
85 #endif
86         return rc;
87 }