board/samsung/trats/trats.c

   1 /*
   2  * Copyright (C) 2011 Samsung Electronics
   3  * Heungjun Kim <riverful.kim@samsung.com>
   4  * Kyungmin Park <kyungmin.park@samsung.com>
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #include <common.h>
  26 #include <asm/io.h>
  27 #include <asm/arch/cpu.h>
  28 #include <asm/arch/gpio.h>
  29 #include <asm/arch/mmc.h>
  30 #include <asm/arch/clock.h>
  31 #include <asm/arch/watchdog.h>
  32 #include <asm/arch/power.h>
  33 #include <pmic.h>
  34 #include <usb/s3c_udc.h>
  35 #include <max8998_pmic.h>
  36
  37 #include "setup.h"
  38
  39 DECLARE_GLOBAL_DATA_PTR;
  40
  41 unsigned int board_rev;
  42
  43 #ifdef CONFIG_REVISION_TAG
  44 u32 get_board_rev(void)
  45 {
  46         return board_rev;
  47 }
  48 #endif
  49
  50 static void check_hw_revision(void);
  51
  52 int board_init(void)
  53 {
  54         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
  55
  56         check_hw_revision();
  57         printf("HW Revision:\t0x%x\n", board_rev);
  58
  59 #if defined(CONFIG_PMIC)
  60         pmic_init();
  61 #endif
  62
  63         return 0;
  64 }
  65
  66 int dram_init(void)
  67 {
  68         gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
  69                 get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
  70
  71         return 0;
  72 }
  73
  74 void dram_init_banksize(void)
  75 {
  76         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  77         gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
  78         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
  79         gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
  80 }
  81
  82 static unsigned int get_hw_revision(void)
  83 {
  84         struct exynos4_gpio_part1 *gpio =
  85                 (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
  86         int hwrev = 0;
  87         int i;
  88
  89         /* hw_rev[3:0] == GPE1[3:0] */
  90         for (i = 0; i < 4; i++) {
  91                 s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
  92                 s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
  93         }
  94
  95         udelay(1);
  96
  97         for (i = 0; i < 4; i++)
  98                 hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
  99
 100         debug("hwrev 0x%x\n", hwrev);
 101
 102         return hwrev;
 103 }
 104
 105 static void check_hw_revision(void)
 106 {
 107         int hwrev;
 108
 109         hwrev = get_hw_revision();
 110
 111         board_rev |= hwrev;
 112 }
 113
 114 #ifdef CONFIG_DISPLAY_BOARDINFO
 115 int checkboard(void)
 116 {
 117         puts("Board:\tTRATS\n");
 118         return 0;
 119 }
 120 #endif
 121
 122 #ifdef CONFIG_GENERIC_MMC
 123 int board_mmc_init(bd_t *bis)
 124 {
 125         struct exynos4_gpio_part2 *gpio =
 126                 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
 127         int i, err;
 128
 129         /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
 130         s5p_gpio_direction_output(&gpio->k0, 2, 1);
 131         s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
 132
 133         /*
 134          * eMMC GPIO:
 135          * SDR 8-bit@48MHz at MMC0
 136          * GPK0[0]      SD_0_CLK(2)
 137          * GPK0[1]      SD_0_CMD(2)
 138          * GPK0[2]      SD_0_CDn        -> Not used
 139          * GPK0[3:6]    SD_0_DATA[0:3](2)
 140          * GPK1[3:6]    SD_0_DATA[0:3](3)
 141          *
 142          * DDR 4-bit@26MHz at MMC4
 143          * GPK0[0]      SD_4_CLK(3)
 144          * GPK0[1]      SD_4_CMD(3)
 145          * GPK0[2]      SD_4_CDn        -> Not used
 146          * GPK0[3:6]    SD_4_DATA[0:3](3)
 147          * GPK1[3:6]    SD_4_DATA[4:7](4)
 148          */
 149         for (i = 0; i < 7; i++) {
 150                 if (i == 2)
 151                         continue;
 152                 /* GPK0[0:6] special function 2 */
 153                 s5p_gpio_cfg_pin(&gpio->k0, i, 0x2);
 154                 /* GPK0[0:6] pull disable */
 155                 s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE);
 156                 /* GPK0[0:6] drv 4x */
 157                 s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X);
 158         }
 159
 160         for (i = 3; i < 7; i++) {
 161                 /* GPK1[3:6] special function 3 */
 162                 s5p_gpio_cfg_pin(&gpio->k1, i, 0x3);
 163                 /* GPK1[3:6] pull disable */
 164                 s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE);
 165                 /* GPK1[3:6] drv 4x */
 166                 s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X);
 167         }
 168
 169         /*
 170          * MMC device init
 171          * mmc0  : eMMC (8-bit buswidth)
 172          * mmc2  : SD card (4-bit buswidth)
 173          */
 174         err = s5p_mmc_init(0, 8);
 175
 176         /* T-flash detect */
 177         s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
 178         s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
 179
 180         /*
 181          * Check the T-flash  detect pin
 182          * GPX3[4] T-flash detect pin
 183          */
 184         if (!s5p_gpio_get_value(&gpio->x3, 4)) {
 185                 /*
 186                  * SD card GPIO:
 187                  * GPK2[0]      SD_2_CLK(2)
 188                  * GPK2[1]      SD_2_CMD(2)
 189                  * GPK2[2]      SD_2_CDn        -> Not used
 190                  * GPK2[3:6]    SD_2_DATA[0:3](2)
 191                  */
 192                 for (i = 0; i < 7; i++) {
 193                         if (i == 2)
 194                                 continue;
 195                         /* GPK2[0:6] special function 2 */
 196                         s5p_gpio_cfg_pin(&gpio->k2, i, 0x2);
 197                         /* GPK2[0:6] pull disable */
 198                         s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE);
 199                         /* GPK2[0:6] drv 4x */
 200                         s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X);
 201                 }
 202                 err = s5p_mmc_init(2, 4);
 203         }
 204
 205         return err;
 206 }
 207 #endif
 208
 209 #ifdef CONFIG_USB_GADGET
 210 static int s5pc210_phy_control(int on)
 211 {
 212         int ret = 0;
 213         struct pmic *p = get_pmic();
 214
 215         if (pmic_probe(p))
 216                 return -1;
 217
 218         if (on) {
 219                 ret |= pmic_set_output(p,
 220                                        MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
 221                                        MAX8998_SAFEOUT1, LDO_ON);
 222                 ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
 223                                       MAX8998_LDO3, LDO_ON);
 224                 ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
 225                                       MAX8998_LDO8, LDO_ON);
 226
 227         } else {
 228                 ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
 229                                       MAX8998_LDO8, LDO_OFF);
 230                 ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
 231                                       MAX8998_LDO3, LDO_OFF);
 232                 ret |= pmic_set_output(p,
 233                                        MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
 234                                        MAX8998_SAFEOUT1, LDO_OFF);
 235         }
 236
 237         if (ret) {
 238                 puts("MAX8998 LDO setting error!\n");
 239                 return -1;
 240         }
 241
 242         return 0;
 243 }
 244
 245 struct s3c_plat_otg_data s5pc210_otg_data = {
 246         .phy_control    = s5pc210_phy_control,
 247         .regs_phy       = EXYNOS4_USBPHY_BASE,
 248         .regs_otg       = EXYNOS4_USBOTG_BASE,
 249         .usb_phy_ctrl   = EXYNOS4_USBPHY_CONTROL,
 250         .usb_flags      = PHY0_SLEEP,
 251 };
 252 #endif
 253
 254 static void pmic_reset(void)
 255 {
 256         struct exynos4_gpio_part2 *gpio =
 257                 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
 258
 259         s5p_gpio_direction_output(&gpio->x0, 7, 1);
 260         s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
 261 }
 262
 263 static void board_clock_init(void)
 264 {
 265         struct exynos4_clock *clk =
 266                 (struct exynos4_clock *)samsung_get_base_clock();
 267
 268         writel(CLK_SRC_CPU_VAL, (unsigned int)&clk->src_cpu);
 269         writel(CLK_SRC_TOP0_VAL, (unsigned int)&clk->src_top0);
 270         writel(CLK_SRC_FSYS_VAL, (unsigned int)&clk->src_fsys);
 271         writel(CLK_SRC_PERIL0_VAL, (unsigned int)&clk->src_peril0);
 272
 273         writel(CLK_DIV_CPU0_VAL, (unsigned int)&clk->div_cpu0);
 274         writel(CLK_DIV_CPU1_VAL, (unsigned int)&clk->div_cpu1);
 275         writel(CLK_DIV_DMC0_VAL, (unsigned int)&clk->div_dmc0);
 276         writel(CLK_DIV_DMC1_VAL, (unsigned int)&clk->div_dmc1);
 277         writel(CLK_DIV_LEFTBUS_VAL, (unsigned int)&clk->div_leftbus);
 278         writel(CLK_DIV_RIGHTBUS_VAL, (unsigned int)&clk->div_rightbus);
 279         writel(CLK_DIV_TOP_VAL, (unsigned int)&clk->div_top);
 280         writel(CLK_DIV_FSYS1_VAL, (unsigned int)&clk->div_fsys1);
 281         writel(CLK_DIV_FSYS2_VAL, (unsigned int)&clk->div_fsys2);
 282         writel(CLK_DIV_FSYS3_VAL, (unsigned int)&clk->div_fsys3);
 283         writel(CLK_DIV_PERIL0_VAL, (unsigned int)&clk->div_peril0);
 284         writel(CLK_DIV_PERIL3_VAL, (unsigned int)&clk->div_peril3);
 285
 286         writel(PLL_LOCKTIME, (unsigned int)&clk->apll_lock);
 287         writel(PLL_LOCKTIME, (unsigned int)&clk->mpll_lock);
 288         writel(PLL_LOCKTIME, (unsigned int)&clk->epll_lock);
 289         writel(PLL_LOCKTIME, (unsigned int)&clk->vpll_lock);
 290         writel(APLL_CON1_VAL, (unsigned int)&clk->apll_con1);
 291         writel(APLL_CON0_VAL, (unsigned int)&clk->apll_con0);
 292         writel(MPLL_CON1_VAL, (unsigned int)&clk->mpll_con1);
 293         writel(MPLL_CON0_VAL, (unsigned int)&clk->mpll_con0);
 294         writel(EPLL_CON1_VAL, (unsigned int)&clk->epll_con1);
 295         writel(EPLL_CON0_VAL, (unsigned int)&clk->epll_con0);
 296         writel(VPLL_CON1_VAL, (unsigned int)&clk->vpll_con1);
 297         writel(VPLL_CON0_VAL, (unsigned int)&clk->vpll_con0);
 298
 299         writel(CLK_GATE_IP_CAM_VAL, (unsigned int)&clk->gate_ip_cam);
 300         writel(CLK_GATE_IP_VP_VAL, (unsigned int)&clk->gate_ip_tv);
 301         writel(CLK_GATE_IP_MFC_VAL, (unsigned int)&clk->gate_ip_mfc);
 302         writel(CLK_GATE_IP_G3D_VAL, (unsigned int)&clk->gate_ip_g3d);
 303         writel(CLK_GATE_IP_IMAGE_VAL, (unsigned int)&clk->gate_ip_image);
 304         writel(CLK_GATE_IP_LCD0_VAL, (unsigned int)&clk->gate_ip_lcd0);
 305         writel(CLK_GATE_IP_LCD1_VAL, (unsigned int)&clk->gate_ip_lcd1);
 306         writel(CLK_GATE_IP_FSYS_VAL, (unsigned int)&clk->gate_ip_fsys);
 307         writel(CLK_GATE_IP_GPS_VAL, (unsigned int)&clk->gate_ip_gps);
 308         writel(CLK_GATE_IP_PERIL_VAL, (unsigned int)&clk->gate_ip_peril);
 309         writel(CLK_GATE_IP_PERIR_VAL, (unsigned int)&clk->gate_ip_perir);
 310         writel(CLK_GATE_BLOCK_VAL, (unsigned int)&clk->gate_block);
 311 }
 312
 313 static void board_power_init(void)
 314 {
 315         struct exynos4_power *pwr =
 316                 (struct exynos4_power *)samsung_get_base_power();
 317
 318         /* PS HOLD */
 319         writel(EXYNOS4_PS_HOLD_CON_VAL, (unsigned int)&pwr->ps_hold_control);
 320
 321         /* Set power down */
 322         writel(0, (unsigned int)&pwr->cam_configuration);
 323         writel(0, (unsigned int)&pwr->tv_configuration);
 324         writel(0, (unsigned int)&pwr->mfc_configuration);
 325         writel(0, (unsigned int)&pwr->g3d_configuration);
 326         writel(0, (unsigned int)&pwr->lcd1_configuration);
 327         writel(0, (unsigned int)&pwr->gps_configuration);
 328         writel(0, (unsigned int)&pwr->gps_alive_configuration);
 329 }
 330
 331 static void board_uart_init(void)
 332 {
 333         struct exynos4_gpio_part1 *gpio1 =
 334                 (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
 335         struct exynos4_gpio_part2 *gpio2 =
 336                 (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
 337         int i;
 338
 339         /*
 340          * UART2 GPIOs
 341          * GPA1CON[0] = UART_2_RXD(2)
 342          * GPA1CON[1] = UART_2_TXD(2)
 343          * GPA1CON[2] = I2C_3_SDA (3)
 344          * GPA1CON[3] = I2C_3_SCL (3)
 345          */
 346
 347         for (i = 0; i < 4; i++) {
 348                 s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
 349                 s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC((i > 1) ? 0x3 : 0x2));
 350         }
 351
 352         /* UART_SEL GPY4[7] (part2) at EXYNOS4 */
 353         s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
 354         s5p_gpio_direction_output(&gpio2->y4, 7, 1);
 355 }
 356
 357 int board_early_init_f(void)
 358 {
 359         wdt_stop();
 360         pmic_reset();
 361         board_clock_init();
 362         board_uart_init();
 363         board_power_init();
 364
 365         return 0;
 366 }