]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - board/utx8245/utx8245.c
38c427a4a025994d069bf0d0ee44dc2b26f77124
[karo-tx-uboot.git] / board / utx8245 / utx8245.c
1 /*
2  * (C) Copyright 2001
3  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4  *
5  * (C) Copyright 2002
6  * Gregory E. Allen, gallen@arlut.utexas.edu
7  * Matthew E. Karger, karger@arlut.utexas.edu
8  * Applied Research Laboratories, The University of Texas at Austin
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28
29 #include <common.h>
30 #include <mpc824x.h>
31 #include <asm/processor.h>
32 #include <asm/io.h>
33 #include <asm/mmu.h>
34 #include <pci.h>
35
36 #define SAVE_SZ 32
37
38
39 int checkboard(void)
40 {
41         ulong busfreq  = get_bus_freq(0);
42         char  buf[32];
43
44         printf("Board: UTX8245 Local Bus at %s MHz\n", strmhz(buf, busfreq));
45         return 0;
46 }
47
48
49 long int initdram(int board_type)
50 {
51 #if 1
52         int                             i, cnt;
53         volatile uchar  *base = CFG_SDRAM_BASE;
54         volatile ulong  *addr;
55         ulong                   save[SAVE_SZ];
56         ulong                   val, ret  = 0;
57 /*
58         write_bat(IBAT1, ((CFG_MAX_RAM_SIZE/2) | BATU_BL_256M | BATU_VS | BATU_VP),
59                         ( (CFG_MAX_RAM_SIZE/2)| BATL_PP_10 | BATL_MEMCOHERENCE));
60
61         write_bat(DBAT1, ((CFG_MAX_RAM_SIZE/2) | BATU_BL_256M | BATU_VS | BATU_VP),
62                         ( (CFG_MAX_RAM_SIZE/2)| BATL_PP_10 | BATL_MEMCOHERENCE));
63 */
64         for (i=0; i<SAVE_SZ; i++) {
65                 save[i] = 0;            /* clear table */
66         }
67
68         for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
69                 addr = (volatile ulong *)base + cnt;
70                 save[i++] = *addr;
71                 *addr = ~cnt;
72         }
73
74         addr = (volatile ulong *)base;
75         save[i] = *addr;
76         *addr = 0;
77
78         if (*addr != 0) {
79                 *addr = save[i];
80                 goto Done;
81         }
82
83         for (cnt = 1; cnt < CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
84                 addr = (volatile ulong *)base + cnt;
85                 val = *addr;
86                 *addr = save[--i];
87                 if (val != ~cnt) {
88                         ulong new_bank0_end = cnt * sizeof(long) - 1;
89                         ulong mear1  = mpc824x_mpc107_getreg(MEAR1);
90                         ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
91                         mear1 =  (mear1  & 0xFFFFFF00) |
92                           ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
93                         emear1 = (emear1 & 0xFFFFFF00) |
94                           ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
95                         mpc824x_mpc107_setreg(MEAR1,  mear1);
96                         mpc824x_mpc107_setreg(EMEAR1, emear1);
97
98                         ret = cnt * sizeof(long);
99                         goto Done;
100                 }
101         }
102
103         ret = CFG_MAX_RAM_SIZE;
104 Done:
105         return ret;
106 #else
107         return (CFG_MAX_RAM_SIZE);
108 #endif
109
110 }
111
112
113 /*
114  * Initialize PCI Devices, report devices found.
115  */
116
117 static struct pci_config_table pci_utx8245_config_table[] = {
118 #ifndef CONFIG_PCI_PNP
119         { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0C, PCI_ANY_ID,
120           pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
121                                        PCI_ENET0_MEMADDR,
122                                        PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
123         { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0B, PCI_ANY_ID,
124           pci_cfgfunc_config_device, { PCI_FIREWIRE_IOADDR,
125                                        PCI_FIREWIRE_MEMADDR,
126                                        PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
127 #endif /*CONFIG_PCI_PNP*/
128         { }
129 };
130
131
132 static void pci_utx8245_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
133 {
134         if (PCI_DEV(dev) == 11)
135                 /* assign serial interrupt line 9 (int25) to FireWire */
136                 pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 25);
137
138         else if (PCI_DEV(dev) == 12)
139                 /* assign serial interrupt line 8 (int24) to Ethernet */
140                 pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 24);
141
142         else if (PCI_DEV(dev) == 14)
143                 /* assign serial interrupt line 0 (int16) to PMC slot 0 */
144                 pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 16);
145
146         else if (PCI_DEV(dev) == 15)
147                 /* assign serial interrupt line 1 (int17) to PMC slot 1 */
148                 pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 17);
149 }
150
151 static struct pci_controller utx8245_hose = {
152 #ifndef CONFIG_PCI_PNP
153         config_table: pci_utx8245_config_table,
154         fixup_irq: pci_utx8245_fixup_irq,
155         write_byte: pci_hose_write_config_byte
156 #endif /*CONFIG_PCI_PNP*/
157 };
158
159 void pci_init_board (void)
160 {
161         pci_mpc824x_init(&utx8245_hose);
162
163         icache_enable();
164 }