]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - common/env_nand.c
splash: Accommodate DM_USB in splash_init_usb()
[karo-tx-uboot.git] / common / env_nand.c
1 /*
2  * (C) Copyright 2000-2010
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * (C) Copyright 2008
6  * Stuart Wood, Lab X Technologies <stuart.wood@labxtechnologies.com>
7  *
8  * (C) Copyright 2004
9  * Jian Zhang, Texas Instruments, jzhang@ti.com.
10  *
11  * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
12  * Andreas Heppel <aheppel@sysgo.de>
13  *
14  * SPDX-License-Identifier:     GPL-2.0+
15  */
16
17 #include <common.h>
18 #include <command.h>
19 #include <environment.h>
20 #include <linux/stddef.h>
21 #include <malloc.h>
22 #include <memalign.h>
23 #include <nand.h>
24 #include <search.h>
25 #include <errno.h>
26
27 #if defined(CONFIG_CMD_SAVEENV) && defined(CONFIG_CMD_NAND)
28 #define CMD_SAVEENV
29 #elif defined(CONFIG_ENV_OFFSET_REDUND)
30 #error CONFIG_ENV_OFFSET_REDUND must have CONFIG_CMD_SAVEENV & CONFIG_CMD_NAND
31 #endif
32
33 #if defined(CONFIG_ENV_SIZE_REDUND) &&  \
34         (CONFIG_ENV_SIZE_REDUND != CONFIG_ENV_SIZE)
35 #error CONFIG_ENV_SIZE_REDUND should be the same as CONFIG_ENV_SIZE
36 #endif
37
38 #ifndef CONFIG_ENV_RANGE
39 #define CONFIG_ENV_RANGE        CONFIG_ENV_SIZE
40 #endif
41
42 char *env_name_spec = "NAND";
43
44 #if defined(ENV_IS_EMBEDDED)
45 env_t *env_ptr = &environment;
46 #elif defined(CONFIG_NAND_ENV_DST)
47 env_t *env_ptr = (env_t *)CONFIG_NAND_ENV_DST;
48 #else /* ! ENV_IS_EMBEDDED */
49 env_t *env_ptr;
50 #endif /* ENV_IS_EMBEDDED */
51
52 DECLARE_GLOBAL_DATA_PTR;
53
54 /*
55  * This is called before nand_init() so we can't read NAND to
56  * validate env data.
57  *
58  * Mark it OK for now. env_relocate() in env_common.c will call our
59  * relocate function which does the real validation.
60  *
61  * When using a NAND boot image (like sequoia_nand), the environment
62  * can be embedded or attached to the U-Boot image in NAND flash.
63  * This way the SPL loads not only the U-Boot image from NAND but
64  * also the environment.
65  */
66 int env_init(void)
67 {
68 #if defined(ENV_IS_EMBEDDED) || defined(CONFIG_NAND_ENV_DST)
69         int crc1_ok = 0, crc2_ok = 0;
70         env_t *tmp_env1;
71
72 #ifdef CONFIG_ENV_OFFSET_REDUND
73         env_t *tmp_env2;
74
75         tmp_env2 = (env_t *)((ulong)env_ptr + CONFIG_ENV_SIZE);
76         crc2_ok = crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc;
77 #endif
78         tmp_env1 = env_ptr;
79         crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc;
80
81         if (!crc1_ok && !crc2_ok) {
82                 gd->env_addr    = 0;
83                 gd->env_valid   = 0;
84
85                 return 0;
86         } else if (crc1_ok && !crc2_ok) {
87                 gd->env_valid = 1;
88         }
89 #ifdef CONFIG_ENV_OFFSET_REDUND
90         else if (!crc1_ok && crc2_ok) {
91                 gd->env_valid = 2;
92         } else {
93                 /* both ok - check serial */
94                 if (tmp_env1->flags == 255 && tmp_env2->flags == 0)
95                         gd->env_valid = 2;
96                 else if (tmp_env2->flags == 255 && tmp_env1->flags == 0)
97                         gd->env_valid = 1;
98                 else if (tmp_env1->flags > tmp_env2->flags)
99                         gd->env_valid = 1;
100                 else if (tmp_env2->flags > tmp_env1->flags)
101                         gd->env_valid = 2;
102                 else /* flags are equal - almost impossible */
103                         gd->env_valid = 1;
104         }
105
106         if (gd->env_valid == 2)
107                 env_ptr = tmp_env2;
108         else
109 #endif
110         if (gd->env_valid == 1)
111                 env_ptr = tmp_env1;
112
113         gd->env_addr = (ulong)env_ptr->data;
114
115 #else /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */
116         gd->env_addr    = (ulong)&default_environment[0];
117         gd->env_valid   = 1;
118 #endif /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */
119
120         return 0;
121 }
122
123 #ifdef CMD_SAVEENV
124 /*
125  * The legacy NAND code saved the environment in the first NAND device i.e.,
126  * nand_dev_desc + 0. This is also the behaviour using the new NAND code.
127  */
128 static int writeenv(size_t offset, u_char *buf)
129 {
130         size_t end = offset + CONFIG_ENV_RANGE;
131         size_t amount_saved = 0;
132         size_t blocksize, len;
133         u_char *char_ptr;
134
135         blocksize = nand_info[0]->erasesize;
136         len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
137
138         while (amount_saved < CONFIG_ENV_SIZE && offset < end) {
139                 if (nand_block_isbad(nand_info[0], offset)) {
140                         offset += blocksize;
141                 } else {
142                         char_ptr = &buf[amount_saved];
143                         if (nand_write(nand_info[0], offset, &len, char_ptr))
144                                 return 1;
145
146                         offset += blocksize;
147                         amount_saved += len;
148                 }
149         }
150         if (amount_saved != CONFIG_ENV_SIZE)
151                 return 1;
152
153         return 0;
154 }
155
156 struct env_location {
157         const char *name;
158         const nand_erase_options_t erase_opts;
159 };
160
161 static int erase_and_write_env(const struct env_location *location,
162                 u_char *env_new)
163 {
164         int ret = 0;
165
166         printf("Erasing %s...\n", location->name);
167         if (nand_erase_opts(nand_info[0], &location->erase_opts))
168                 return 1;
169
170         printf("Writing to %s... ", location->name);
171         ret = writeenv(location->erase_opts.offset, env_new);
172         puts(ret ? "FAILED!\n" : "OK\n");
173
174         return ret;
175 }
176
177 #ifdef CONFIG_ENV_OFFSET_REDUND
178 static unsigned char env_flags;
179 #endif
180
181 int saveenv(void)
182 {
183         int     ret = 0;
184         ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1);
185         int     env_idx = 0;
186         static const struct env_location location[] = {
187                 {
188                         .name = "NAND",
189                         .erase_opts = {
190                                 .length = CONFIG_ENV_RANGE,
191                                 .offset = CONFIG_ENV_OFFSET,
192                         },
193                 },
194 #ifdef CONFIG_ENV_OFFSET_REDUND
195                 {
196                         .name = "redundant NAND",
197                         .erase_opts = {
198                                 .length = CONFIG_ENV_RANGE,
199                                 .offset = CONFIG_ENV_OFFSET_REDUND,
200                         },
201                 },
202 #endif
203         };
204
205
206         if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE)
207                 return 1;
208
209         ret = env_export(env_new);
210         if (ret)
211                 return ret;
212
213 #ifdef CONFIG_ENV_OFFSET_REDUND
214         env_new->flags = ++env_flags; /* increase the serial */
215         env_idx = (gd->env_valid == 1);
216 #endif
217
218         ret = erase_and_write_env(&location[env_idx], (u_char *)env_new);
219 #ifdef CONFIG_ENV_OFFSET_REDUND
220         if (!ret) {
221                 /* preset other copy for next write */
222                 gd->env_valid = gd->env_valid == 2 ? 1 : 2;
223                 return ret;
224         }
225
226         env_idx = (env_idx + 1) & 1;
227         ret = erase_and_write_env(&location[env_idx], (u_char *)env_new);
228         if (!ret)
229                 printf("Warning: primary env write failed,"
230                                 " redundancy is lost!\n");
231 #endif
232
233         return ret;
234 }
235 #endif /* CMD_SAVEENV */
236
237 #if defined(CONFIG_SPL_BUILD)
238 static int readenv(size_t offset, u_char *buf)
239 {
240         return nand_spl_load_image(offset, CONFIG_ENV_SIZE, buf);
241 }
242 #else
243 static int readenv(size_t offset, u_char *buf)
244 {
245         size_t end = offset + CONFIG_ENV_RANGE;
246         size_t amount_loaded = 0;
247         size_t blocksize, len;
248         u_char *char_ptr;
249
250         blocksize = nand_info[0]->erasesize;
251         if (!blocksize)
252                 return 1;
253
254         len = min(blocksize, (size_t)CONFIG_ENV_SIZE);
255
256         while (amount_loaded < CONFIG_ENV_SIZE && offset < end) {
257                 if (nand_block_isbad(nand_info[0], offset)) {
258                         offset += blocksize;
259                 } else {
260                         char_ptr = &buf[amount_loaded];
261                         if (nand_read_skip_bad(nand_info[0], offset,
262                                                &len, NULL,
263                                                nand_info[0]->size, char_ptr))
264                                 return 1;
265
266                         offset += blocksize;
267                         amount_loaded += len;
268                 }
269         }
270
271         if (amount_loaded != CONFIG_ENV_SIZE)
272                 return 1;
273
274         return 0;
275 }
276 #endif /* #if defined(CONFIG_SPL_BUILD) */
277
278 #ifdef CONFIG_ENV_OFFSET_OOB
279 int get_nand_env_oob(struct mtd_info *mtd, unsigned long *result)
280 {
281         struct mtd_oob_ops ops;
282         uint32_t oob_buf[ENV_OFFSET_SIZE / sizeof(uint32_t)];
283         int ret;
284
285         ops.datbuf      = NULL;
286         ops.mode        = MTD_OOB_AUTO;
287         ops.ooboffs     = 0;
288         ops.ooblen      = ENV_OFFSET_SIZE;
289         ops.oobbuf      = (void *)oob_buf;
290
291         ret = mtd->read_oob(mtd, ENV_OFFSET_SIZE, &ops);
292         if (ret) {
293                 printf("error reading OOB block 0\n");
294                 return ret;
295         }
296
297         if (oob_buf[0] == ENV_OOB_MARKER) {
298                 *result = oob_buf[1] * mtd->erasesize;
299         } else if (oob_buf[0] == ENV_OOB_MARKER_OLD) {
300                 *result = oob_buf[1];
301         } else {
302                 printf("No dynamic environment marker in OOB block 0\n");
303                 return -ENOENT;
304         }
305
306         return 0;
307 }
308 #endif
309
310 #ifdef CONFIG_ENV_OFFSET_REDUND
311 void env_relocate_spec(void)
312 {
313 #if !defined(ENV_IS_EMBEDDED)
314         int read1_fail = 0, read2_fail = 0;
315         int crc1_ok = 0, crc2_ok = 0;
316         env_t *ep, *tmp_env1, *tmp_env2;
317
318         tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE);
319         tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE);
320         if (tmp_env1 == NULL || tmp_env2 == NULL) {
321                 puts("Can't allocate buffers for environment\n");
322                 set_default_env("!malloc() failed");
323                 goto done;
324         }
325
326         read1_fail = readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1);
327         read2_fail = readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2);
328
329         if (read1_fail && read2_fail)
330                 puts("*** Error - No Valid Environment Area found\n");
331         else if (read1_fail || read2_fail)
332                 puts("*** Warning - some problems detected "
333                      "reading environment; recovered successfully\n");
334
335         crc1_ok = !read1_fail &&
336                 (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
337         crc2_ok = !read2_fail &&
338                 (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
339
340         if (!crc1_ok && !crc2_ok) {
341                 set_default_env("!bad CRC");
342                 goto done;
343         } else if (crc1_ok && !crc2_ok) {
344                 gd->env_valid = 1;
345         } else if (!crc1_ok && crc2_ok) {
346                 gd->env_valid = 2;
347         } else {
348                 /* both ok - check serial */
349                 if (tmp_env1->flags == 255 && tmp_env2->flags == 0)
350                         gd->env_valid = 2;
351                 else if (tmp_env2->flags == 255 && tmp_env1->flags == 0)
352                         gd->env_valid = 1;
353                 else if (tmp_env1->flags > tmp_env2->flags)
354                         gd->env_valid = 1;
355                 else if (tmp_env2->flags > tmp_env1->flags)
356                         gd->env_valid = 2;
357                 else /* flags are equal - almost impossible */
358                         gd->env_valid = 1;
359         }
360
361         free(env_ptr);
362
363         if (gd->env_valid == 1)
364                 ep = tmp_env1;
365         else
366                 ep = tmp_env2;
367
368         env_flags = ep->flags;
369         env_import((char *)ep, 0);
370
371 done:
372         free(tmp_env1);
373         free(tmp_env2);
374
375 #endif /* ! ENV_IS_EMBEDDED */
376 }
377 #else /* ! CONFIG_ENV_OFFSET_REDUND */
378 /*
379  * The legacy NAND code saved the environment in the first NAND
380  * device i.e., nand_dev_desc + 0. This is also the behaviour using
381  * the new NAND code.
382  */
383 void env_relocate_spec(void)
384 {
385 #if !defined(ENV_IS_EMBEDDED)
386         int ret;
387         ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE);
388
389 #if defined(CONFIG_ENV_OFFSET_OOB)
390         ret = get_nand_env_oob(nand_info[0], &nand_env_oob_offset);
391         /*
392          * If unable to read environment offset from NAND OOB then fall through
393          * to the normal environment reading code below
394          */
395         if (!ret) {
396                 printf("Found Environment offset in OOB..\n");
397         } else {
398                 set_default_env("!no env offset in OOB");
399                 return;
400         }
401 #endif
402
403         ret = readenv(CONFIG_ENV_OFFSET, (u_char *)buf);
404         if (ret) {
405                 set_default_env("!readenv() failed");
406                 return;
407         }
408
409         env_import(buf, 1);
410 #endif /* ! ENV_IS_EMBEDDED */
411 }
412 #endif /* CONFIG_ENV_OFFSET_REDUND */