1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
30 hardware triton_eco_stk1 ;
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1 current ;
34 package -hardware CYGPKG_IO_FLASH current ;
35 package -hardware CYGPKG_DEVS_FLASH_STRATA current ;
36 package -hardware CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON current ;
37 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
38 package -hardware CYGPKG_DEVS_ETH_SMSC_LAN91C111 current ;
39 package -hardware CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON current ;
40 package CYGPKG_HAL current ;
41 package CYGPKG_INFRA current ;
42 package CYGPKG_REDBOOT current ;
43 package CYGPKG_ISOINFRA current ;
44 package CYGPKG_LIBC_STRING current ;
45 package CYGPKG_NS_DNS current ;
46 package CYGPKG_CRC current ;
49 # ---- conflicts -------------------------------------------------------
50 # There are no conflicts.
52 # ---- contents --------------------------------------------------------
55 # Global build options
56 # Global build options including control over
57 # compiler flags, linker flags and choice of toolchain.
59 cdl_component CYGBLD_GLOBAL_OPTIONS {
60 # There is no associated value.
62 # The following properties are affected by this value
66 # Global command prefix
67 # This option specifies the command prefix used when
68 # invoking the build tools.
70 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
74 # Default value: xscale-elf
77 # Global compiler flags
78 # This option controls the global compiler flags which are used to
79 # compile all packages by default. Individual packages may define
80 # options which override these global flags.
82 cdl_option CYGBLD_GLOBAL_CFLAGS {
84 # No user value, uncomment the following line to provide one.
85 # user_value "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
86 # value_source default
87 # Default value: "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
89 # The following properties are affected by this value
90 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
91 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
92 # option CYGBLD_INFRA_CFLAGS_PIPE
93 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
97 # This option controls the global linker flags. Individual
98 # packages may define options which override these global flags.
100 cdl_option CYGBLD_GLOBAL_LDFLAGS {
102 # No user value, uncomment the following line to provide one.
103 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
104 # value_source default
105 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
108 # Build GDB stub ROM image
109 # This option enables the building of the GDB stubs for the
110 # board. The common HAL controls takes care of most of the
111 # build process, but the final conversion from ELF image to
112 # binary data is handled by the platform CDL, allowing
113 # relocation of the data if necessary.
115 cdl_option CYGBLD_BUILD_GDB_STUBS {
117 # No user value, uncomment the following line to provide one.
119 # value_source default
121 # Requires: CYG_HAL_STARTUP == "ROM"
122 # CYG_HAL_STARTUP == ROM
124 # Requires: CYGSEM_HAL_ROM_MONITOR
125 # CYGSEM_HAL_ROM_MONITOR == 1
127 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
128 # CYGBLD_BUILD_COMMON_GDB_STUBS == 0
130 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
131 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
133 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
134 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
136 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
137 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
139 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
140 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
142 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
143 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
147 # Build common GDB stub ROM image
148 # Unless a target board has specific requirements to the
149 # stub implementation, it can use a simple common stub.
150 # This option, which gets enabled by platform HALs as
151 # appropriate, controls the building of the common stub.
153 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
155 # No user value, uncomment the following line to provide one.
157 # value_source default
159 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
160 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
163 # The following properties are affected by this value
164 # option CYGBLD_BUILD_GDB_STUBS
165 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
169 # Common ethernet support
170 # doc: ref/io-eth-drv-generic.html
171 # Platform independent ethernet drivers
173 cdl_package CYGPKG_IO_ETH_DRIVERS {
174 # Packages cannot be added or removed, nor can their version be changed,
175 # simply by editing their value. Instead the appropriate configuration
176 # should be used to perform these actions.
178 # This value cannot be modified here.
180 # Current value: 1 current
182 # The following properties are affected by this value
183 # package CYGPKG_DEVS_ETH_SMSC_LAN91C111
184 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
185 # package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON
186 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
187 # component CYGPKG_REDBOOT_NETWORKING
188 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
192 # Driver supports multicast addressing
193 # This interface defines whether or not a driver can handle
194 # requests for multicast addressing.
196 cdl_interface CYGINT_IO_ETH_MULTICAST {
197 # No options implement this inferface
198 # This value cannot be modified here.
203 # Support printing driver debug information
204 # Selecting this option will include code to allow the driver to
205 # print lots of information on diagnostic output such as full
208 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
210 # No user value, uncomment the following line to provide one.
212 # value_source default
217 # Driver debug output verbosity
218 # The value of this option indicates the default verbosity
219 # level of debugging output. 0 means no debugging output
220 # is made by default. Higher values indicate higher verbosity.
221 # The verbosity level may also be changed at run time by
222 # changing the variable cyg_io_eth_net_debug.
224 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
226 # No user value, uncomment the following line to provide one.
228 # value_source default
233 # Size of scatter-gather I/O lists
234 # A scatter-gather list is used to pass requests to/from
235 # the physical device driver. This list can typically be
236 # small, as the data is normally already packed into reasonable
239 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
241 # No user value, uncomment the following line to provide one.
243 # value_source default
247 # Support for standard eCos TCP/IP stack.
249 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
250 # This option is not active
251 # ActiveIf constraint: CYGPKG_NET
252 # CYGPKG_NET (unknown) == 0
256 # No user value, uncomment the following line to provide one.
258 # value_source default
260 # Requires: CYGINT_ISO_STRING_STRFUNCS
261 # CYGINT_ISO_STRING_STRFUNCS == 1
266 # Warn when there are no more mbufs
267 # Warnings about running out of mbufs are printed to the
268 # diagnostic output channel via diag_printf() if this option
269 # is enabled. Mbufs are the network stack's basic dynamic
270 # memory objects that hold all packets in transit; running
271 # out is bad for performance but not fatal, not a crash.
272 # You might want to turn off the warnings to preserve realtime
273 # properties of the system even in extremis.
275 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
276 # This option is not active
277 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
280 # No user value, uncomment the following line to provide one.
282 # value_source default
286 # Simulate network failures for testing
287 # This package contains a suite of simulated failure modes
288 # for the ethernet device layer, including dropping and/or
289 # corrupting received packets, dropping packets queued for
290 # transmission, and simulating a complete network break.
291 # It requires the kernel as a source of time information.
293 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
294 # This option is not active
295 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
298 # No user value, uncomment the following line to provide one.
300 # value_source default
305 # Drop incoming packets (percentage)
307 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
308 # This option is not active
309 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
310 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
313 # No user value, uncomment the following line to provide one.
315 # value_source default
316 # Default value: 1 10
317 # Legal values: 10 50 80
320 # Corrupt incoming packets (percentage)
322 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
323 # This option is not active
324 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
325 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
328 # No user value, uncomment the following line to provide one.
330 # value_source default
331 # Default value: 1 10
332 # Legal values: 10 50 80
335 # Drop outgoing packets (percentage)
337 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
338 # This option is not active
339 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
340 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
343 # No user value, uncomment the following line to provide one.
345 # value_source default
346 # Default value: 1 10
347 # Legal values: 10 50 80
350 # Simulate a line cut from time to time
351 # This option causes the system to drop all packets for a
352 # short random period (10s of seconds), and then act
353 # normally for up to 4 times that long. This simulates your
354 # sysadmin fiddling with plugs in the network switch
357 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
358 # This option is not active
359 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
360 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
363 # No user value, uncomment the following line to provide one.
365 # value_source default
371 # Support for stand-alone network stack.
373 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
374 # ActiveIf constraint: !CYGPKG_NET
375 # CYGPKG_NET (unknown) == 0
379 # No user value, uncomment the following line to provide one.
381 # value_source default
383 # Requires: CYGINT_ISO_STRING_MEMFUNCS
384 # CYGINT_ISO_STRING_MEMFUNCS == 1
389 # Pass packets to an alternate stack
390 # Define this to allow packets seen by this layer to be
391 # passed on to the previous logical layer, i.e. when
392 # stand-alone processing replaces system (eCos) processing.
394 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
399 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
400 # CYGPKG_REDBOOT_NETWORKING == 1
404 # Number of [network] buffers
405 # This option is used to allocate space to buffer incoming network
406 # packets. These buffers are used to hold data until they can be
407 # logically processed by higher layers.
409 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
411 # No user value, uncomment the following line to provide one.
413 # value_source default
415 # Legal values: 2 to 32
418 # Show driver warnings
419 # Selecting this option will allows the stand-alone ethernet driver
420 # to display warnings on the system console when incoming network
421 # packets are being discarded due to lack of buffer space.
423 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
424 # ActiveIf constraint: CYGPKG_REDBOOT
425 # CYGPKG_REDBOOT == current
429 # No user value, uncomment the following line to provide one.
431 # value_source default
436 # Support for lwIP network stack.
438 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
439 # This option is not active
440 # ActiveIf constraint: CYGPKG_NET_LWIP
441 # CYGPKG_NET_LWIP (unknown) == 0
445 # No user value, uncomment the following line to provide one.
447 # value_source default
449 # Requires: !CYGPKG_NET
450 # CYGPKG_NET (unknown) == 0
454 # Interrupt support required
455 # This interface is used to indicate to the low
456 # level device drivers that interrupt driven operation
457 # is required by higher layers.
459 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
460 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
461 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
462 # This value cannot be modified here.
466 # The following properties are affected by this value
469 # Common ethernet support build options
471 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
472 # There is no associated value.
476 # Additional compiler flags
477 # This option modifies the set of compiler flags for
478 # building the common ethernet support package. These flags are used in addition
479 # to the set of global flags.
481 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
483 # No user value, uncomment the following line to provide one.
484 # user_value "-D_KERNEL -D__ECOS"
485 # value_source default
486 # Default value: "-D_KERNEL -D__ECOS"
490 # SMSC LAN91C111 compatible ethernet driver
491 # Ethernet driver for SMSC LAN91C111 compatible controllers.
493 cdl_package CYGPKG_DEVS_ETH_SMSC_LAN91C111 {
494 # Packages cannot be added or removed, nor can their version be changed,
495 # simply by editing their value. Instead the appropriate configuration
496 # should be used to perform these actions.
498 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
499 # CYGPKG_IO_ETH_DRIVERS == current
501 # ActiveIf constraint: CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
502 # CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED == 1
505 # This value cannot be modified here.
507 # Current value: 1 current
509 # The following properties are affected by this value
510 # package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON
511 # Requires: CYGPKG_DEVS_ETH_SMSC_LAN91C111
515 # use 32 bit data access
516 # The device driver uses 32 bit data access if
517 # this option is enabled, otherwise 16 bit data access is
520 cdl_option CYGSEM_DEVS_ETH_SMSC_LAN91C111_USE_32BIT {
522 # No user value, uncomment the following line to provide one.
524 # value_source default
528 # SIOCSIFHWADDR records ESA (MAC address) in EEPROM
529 # The ioctl() socket call with operand SIOCSIFHWADDR sets the
530 # interface hardware address - the MAC address or Ethernet Station
531 # Address (ESA). This option causes the new MAC address to be written
532 # into the EEPROM associated with the interface, so that the new
533 # MAC address is permanently recorded. Doing this should be a
534 # carefully chosen decision, hence this option.
536 cdl_option CYGSEM_DEVS_ETH_SMSC_LAN91C111_WRITE_EEPROM {
538 # No user value, uncomment the following line to provide one.
540 # value_source default
544 # ESA is statically configured
545 # If this is nonzero, then the ESA (MAC address) is statically
546 # configured in the platform-specific package which instantiates
547 # this driver with all its details.
549 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_STATIC_ESA {
550 # Implemented by CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON, active, enabled
551 # This value cannot be modified here.
555 # The following properties are affected by this value
558 # LAN91C111 ethernet driver build options
560 cdl_component CYGPKG_DEVS_ETH_SMSC_LAN91C111_OPTIONS {
561 # There is no associated value.
565 # Additional compiler flags
566 # This option modifies the set of compiler flags for
567 # building the LAN91C111 ethernet driver package.
568 # These flags are used in addition
569 # to the set of global flags.
571 cdl_option CYGPKG_DEVS_ETH_SMSC_LAN91C111_CFLAGS_ADD {
573 # No user value, uncomment the following line to provide one.
574 # user_value "-O2 -D_KERNEL -D__ECOS"
575 # value_source default
576 # Default value: "-O2 -D_KERNEL -D__ECOS"
581 # TRITON SMC91C111 ethernet driver
582 # Ethernet driver for TRITON boards.
584 cdl_package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON {
585 # Packages cannot be added or removed, nor can their version be changed,
586 # simply by editing their value. Instead the appropriate configuration
587 # should be used to perform these actions.
589 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
590 # CYGPKG_IO_ETH_DRIVERS == current
593 # This value cannot be modified here.
595 # Current value: 1 current
596 # Requires: CYGPKG_DEVS_ETH_SMSC_LAN91C111
597 # CYGPKG_DEVS_ETH_SMSC_LAN91C111 == current
602 # SMSC LAN91C111 driver required
604 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED {
605 # Implemented by CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON, active, enabled
606 # This value cannot be modified here.
610 # The following properties are affected by this value
611 # package CYGPKG_DEVS_ETH_SMSC_LAN91C111
612 # ActiveIf: CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
615 # Device name for the ethernet driver
616 # This option sets the name of the ethernet device for the
619 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_NAME {
621 # No user value, uncomment the following line to provide one.
622 # user_value "\"eth0\""
623 # value_source default
624 # Default value: "\"eth0\""
627 # The ethernet station address (MAC)
628 # A static ethernet station address.
629 # Caution: Booting two systems with the same MAC on the same
630 # network, will cause severe conflicts.
632 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA {
633 # This option is not active
634 # ActiveIf constraint: !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
635 # CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA == 1
639 # No user value, uncomment the following line to provide one.
640 # user_value "{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"
641 # value_source default
642 # Default value: "{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"
645 # Use the 1-WIRE device ESA (MAC address)
646 # Use the ESA that is stored in the 1wire device instead of
649 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_1WIRE_ESA {
656 # Use the RedBoot ESA (MAC address)
657 # Use the ESA that is stored as a RedBoot variable instead of
660 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA {
666 # The following properties are affected by this value
667 # option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA
668 # ActiveIf: !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
673 # ISO C library string functions
675 # This package provides string functions specified by the
676 # ISO C standard - ISO/IEC 9899:1990.
678 cdl_package CYGPKG_LIBC_STRING {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # This value cannot be modified here.
685 # Current value: 1 current
686 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
687 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
689 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
690 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
692 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
693 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
695 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
696 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
698 # Requires: CYGPKG_ISOINFRA
699 # CYGPKG_ISOINFRA == current
704 # Inline versions of <string.h> functions
705 # This option chooses whether some of the
706 # particularly simple string functions from
707 # <string.h> are available as inline
708 # functions. This may improve performance, and as
709 # the functions are small, may even improve code
712 cdl_option CYGIMP_LIBC_STRING_INLINES {
714 # No user value, uncomment the following line to provide one.
716 # value_source default
720 # Optimize string functions for code size
721 # This option tries to reduce string function
722 # code size at the expense of execution speed. The
723 # same effect can be produced if the code is
724 # compiled with the -Os option to the compiler.
726 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
728 # No user value, uncomment the following line to provide one.
730 # value_source default
734 # Provide BSD compatibility functions
735 # Enabling this option causes various compatibility functions
736 # commonly found in the BSD UNIX operating system to be included.
737 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
738 # strncasecmp, index, rindex and swab.
740 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
742 # No user value, uncomment the following line to provide one.
744 # The inferred value should not be edited directly.
746 # value_source inferred
748 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
749 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
751 # Requires: CYGINT_ISO_CTYPE
752 # CYGINT_ISO_CTYPE == 0
757 # These options control the behaviour of the
758 # strtok() and strtok_r() string tokenization
761 cdl_component CYGPKG_LIBC_STRING_STRTOK {
762 # There is no associated value.
766 # Per-thread strtok()
767 # This option controls whether the string function
768 # strtok() has its state recorded on a per-thread
769 # basis rather than global. If this option is
770 # disabled, some per-thread space can be saved.
771 # Note there is also a POSIX-standard strtok_r()
772 # function to achieve a similar effect with user
773 # support. Enabling this option will use one slot
774 # of kernel per-thread data. You should ensure you
775 # have enough slots configured for all your
778 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
779 # This option is not active
780 # ActiveIf constraint: CYGPKG_KERNEL
781 # CYGPKG_KERNEL (unknown) == 0
785 # No user value, uncomment the following line to provide one.
787 # value_source default
788 # Default value: CYGVAR_KERNEL_THREADS_DATA
789 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
791 # Requires: CYGVAR_KERNEL_THREADS_DATA
792 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
797 # Trace verbosity level for debugging the <string.h>
798 # functions strtok() and strtok_r(). Increase this
799 # value to get additional trace output.
801 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
803 # No user value, uncomment the following line to provide one.
805 # value_source default
807 # Legal values: 0 to 1
811 # C library string functions build options
812 # Package specific build options including control over
813 # compiler flags used only in building this package,
814 # and details of which tests are built.
816 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
817 # There is no associated value.
821 # Additional compiler flags
822 # This option modifies the set of compiler flags for
823 # building the C library. These flags are used in addition
824 # to the set of global flags.
826 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
828 # No user value, uncomment the following line to provide one.
830 # value_source default
834 # Suppressed compiler flags
835 # This option modifies the set of compiler flags for
836 # building the C library. These flags are removed from
837 # the set of global flags if present.
839 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
841 # No user value, uncomment the following line to provide one.
843 # value_source default
847 # C library string function tests
848 # This option specifies the set of tests for the C library
851 cdl_option CYGPKG_LIBC_STRING_TESTS {
852 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
854 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
860 # FLASH device drivers
861 # This option enables drivers for basic I/O services on
864 cdl_package CYGPKG_IO_FLASH {
865 # Packages cannot be added or removed, nor can their version be changed,
866 # simply by editing their value. Instead the appropriate configuration
867 # should be used to perform these actions.
869 # This value cannot be modified here.
871 # Current value: 1 current
872 # Requires: CYGPKG_ISOINFRA
873 # CYGPKG_ISOINFRA == current
875 # Requires: CYGINT_ISO_STRING_STRFUNCS
876 # CYGINT_ISO_STRING_STRFUNCS == 1
879 # The following properties are affected by this value
880 # package CYGPKG_DEVS_FLASH_STRATA
881 # ActiveIf: CYGPKG_IO_FLASH
882 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
883 # ActiveIf: CYGPKG_IO_FLASH
887 # Extra memory required by FLASH device drivers
888 # Use this option to control how much extra memory is used
889 # by the FLASH drivers to perform certain operations. This
890 # memory is used to hold driver functions in RAM (for platforms
891 # which require it). The value should thus be large enough
892 # to hold any such driver. Reducing this value will make
893 # more RAM available to general programs.
895 cdl_option CYGNUM_FLASH_WORKSPACE_SIZE {
897 # No user value, uncomment the following line to provide one.
898 # user_value 0x00001000
899 # value_source default
900 # Default value: 0x00001000
903 # Hardware FLASH device drivers
904 # This option enables the hardware device drivers
905 # for the current platform.
907 cdl_interface CYGHWR_IO_FLASH_DEVICE {
908 # Implemented by CYGPKG_DEVS_FLASH_STRATA, active, enabled
909 # This value cannot be modified here.
913 # The following properties are affected by this value
914 # component CYGPKG_REDBOOT_FLASH
915 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
918 # Hardware FLASH device drivers are not in RAM
919 # This option makes the IO driver copy the device
920 # driver functions to RAM before calling them. Newer
921 # drivers should make sure that the functions are
922 # linked to RAM by putting them in .2ram sections.
924 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
925 # Implemented by CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM, active, enabled
926 # This value cannot be modified here.
930 # The following properties are affected by this value
933 # Hardware can support block locking
934 # This option will be enabled by devices which can support
935 # locking (write-protection) of individual blocks.
937 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
938 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
939 # This value cannot be modified here.
943 # The following properties are affected by this value
944 # component CYGPKG_DEVS_FLASH_STRATA_LOCKING
945 # ActiveIf: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
946 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
947 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
950 # Verify data programmed to flash
951 # Selecting this option will cause verification of data
952 # programmed to flash.
954 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
956 # No user value, uncomment the following line to provide one.
958 # value_source default
962 # Platform has flash soft DIP switch write-protect
963 # Selecting this option will cause the state of a hardware jumper or
964 # dipswitch to be read by software to determine whether the flash is
965 # write-protected or not.
967 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
969 # No user value, uncomment the following line to provide one.
971 # value_source default
975 # Instantiate in I/O block device API
976 # Provides a block device accessible using the standard I/O
977 # API ( cyg_io_read() etc. )
979 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
980 # This option is not active
981 # ActiveIf constraint: CYGPKG_IO
982 # CYGPKG_IO (unknown) == 0
986 # No user value, uncomment the following line to provide one.
988 # value_source default
993 # Name of flash device 1 block device
995 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
996 # This option is not active
997 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
998 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
1001 # No user value, uncomment the following line to provide one.
1002 # user_value "\"/dev/flash1\""
1003 # value_source default
1004 # Default value: "\"/dev/flash1\""
1008 # Start offset from flash base
1009 # This gives the offset from the base of flash which this
1010 # block device corresponds to.
1012 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
1013 # This option is not active
1014 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
1017 # No user value, uncomment the following line to provide one.
1018 # user_value 0x00100000
1019 # value_source default
1020 # Default value: 0x00100000
1024 # This gives the length of the region of flash given over
1025 # to this block device.
1027 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
1028 # This option is not active
1029 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
1032 # No user value, uncomment the following line to provide one.
1033 # user_value 0x00100000
1034 # value_source default
1035 # Default value: 0x00100000
1040 # Intel StrataFLASH memory support
1041 # FLASH memory device support for Intel StrataFlash
1043 cdl_package CYGPKG_DEVS_FLASH_STRATA {
1044 # Packages cannot be added or removed, nor can their version be changed,
1045 # simply by editing their value. Instead the appropriate configuration
1046 # should be used to perform these actions.
1048 # ActiveIf constraint: CYGPKG_IO_FLASH
1049 # CYGPKG_IO_FLASH == current
1051 # ActiveIf constraint: CYGINT_DEVS_FLASH_STRATA_REQUIRED
1052 # CYGINT_DEVS_FLASH_STRATA_REQUIRED == 1
1055 # This value cannot be modified here.
1057 # Current value: 1 current
1059 # The following properties are affected by this value
1060 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
1061 # Requires: CYGPKG_DEVS_FLASH_STRATA
1065 # Control Flash driver code copy to RAM
1066 # Rarely, it is useful to disable the request that flash driver code
1067 # be copied to separate RAM for execution. This option lets you do that.
1068 # It should only be controlled by redboot_XXX.ecm config files, for
1069 # building different varieties of RedBoot.
1070 # NEVER disable this option for ROM startup code, which executes in place
1071 # from Flash: the build will not work.
1073 cdl_option CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM {
1075 # No user value, uncomment the following line to provide one.
1077 # value_source default
1081 # Flash device implements locking
1083 cdl_component CYGPKG_DEVS_FLASH_STRATA_LOCKING {
1084 # ActiveIf constraint: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
1085 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
1088 # Calculated value: 1
1094 # TRITON FLASH memory support
1096 cdl_package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON {
1097 # Packages cannot be added or removed, nor can their version be changed,
1098 # simply by editing their value. Instead the appropriate configuration
1099 # should be used to perform these actions.
1101 # ActiveIf constraint: CYGPKG_IO_FLASH
1102 # CYGPKG_IO_FLASH == current
1105 # This value cannot be modified here.
1107 # Current value: 1 current
1108 # Requires: CYGPKG_DEVS_FLASH_STRATA
1109 # CYGPKG_DEVS_FLASH_STRATA == current
1114 # Generic StrataFLASH driver required
1116 cdl_interface CYGINT_DEVS_FLASH_STRATA_REQUIRED {
1117 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
1118 # This value cannot be modified here.
1122 # The following properties are affected by this value
1123 # package CYGPKG_DEVS_FLASH_STRATA
1124 # ActiveIf: CYGINT_DEVS_FLASH_STRATA_REQUIRED
1130 # doc: ref/the-ecos-hardware-abstraction-layer.html
1131 # The eCos HAL package provide a porting layer for
1132 # higher-level parts of the system such as the kernel and the
1133 # C library. Each installation should have HAL packages for
1134 # one or more architectures, and for each architecture there
1135 # may be one or more supported platforms. It is necessary to
1136 # select one target architecture and one platform for that
1137 # architecture. There are also a number of configuration
1138 # options that are common to all HAL packages.
1140 cdl_package CYGPKG_HAL {
1141 # Packages cannot be added or removed, nor can their version be changed,
1142 # simply by editing their value. Instead the appropriate configuration
1143 # should be used to perform these actions.
1145 # This value cannot be modified here.
1147 # Current value: 1 current
1148 # Requires: CYGPKG_INFRA
1149 # CYGPKG_INFRA == current
1152 # The following properties are affected by this value
1156 # Platform-independent HAL options
1157 # A number of configuration options are common to most or all
1158 # HAL packages, for example options controlling how much state
1159 # should be saved during a context switch. The implementations
1160 # of these options will vary from architecture to architecture.
1162 cdl_component CYGPKG_HAL_COMMON {
1163 # There is no associated value.
1167 # Provide eCos kernel support
1168 # The HAL can be configured to either support the full eCos
1169 # kernel, or to support only very simple applications which do
1170 # not require a full kernel. If kernel support is not required
1171 # then some of the startup, exception, and interrupt handling
1172 # code can be eliminated.
1174 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1176 # No user value, uncomment the following line to provide one.
1178 # value_source default
1179 # Default value: CYGPKG_KERNEL
1180 # CYGPKG_KERNEL (unknown) == 0
1182 # Requires: CYGPKG_KERNEL
1183 # CYGPKG_KERNEL (unknown) == 0
1187 # HAL exception support
1188 # When a processor exception occurs, for example an attempt to
1189 # execute an illegal instruction or to perform a divide by
1190 # zero, this exception may be handled in a number of different
1191 # ways. If the target system has gdb support then typically
1192 # the exception will be handled by gdb code. Otherwise if the
1193 # HAL exception support is enabled then the HAL will invoke a
1194 # routine deliver_exception(). Typically this routine will be
1195 # provided by the eCos kernel, but it is possible for
1196 # application code to provide its own implementation. If the
1197 # HAL exception support is not enabled and a processor
1198 # exception occurs then the behaviour of the system is
1201 cdl_option CYGPKG_HAL_EXCEPTIONS {
1203 # No user value, uncomment the following line to provide one.
1205 # value_source default
1206 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1207 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1209 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1210 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1214 # Stop calling constructors early
1215 # This option supports environments where some constructors
1216 # must be run in the context of a thread rather than at
1217 # simple system startup time. A boolean flag named
1218 # cyg_hal_stop_constructors is set to 1 when constructors
1219 # should no longer be invoked. It is up to some other
1220 # package to deal with the rest of the constructors.
1221 # In the current version this is only possible with the
1224 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1226 # No user value, uncomment the following line to provide one.
1228 # value_source default
1230 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1231 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1235 # HAL uses the MMU and allows for CDL manipulation of it's use
1237 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1238 # No options implement this inferface
1239 # This value cannot be modified here.
1243 # The following properties are affected by this value
1244 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1245 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1248 # Install MMU tables.
1249 # This option controls whether this application installs
1250 # its own Memory Management Unit (MMU) tables, or relies on the
1251 # existing environment to run.
1253 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1254 # This option is not active
1255 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1256 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1260 # No user value, uncomment the following line to provide one.
1262 # value_source default
1263 # Default value: CYG_HAL_STARTUP != "RAM"
1264 # CYG_HAL_STARTUP == ROM
1267 # The following properties are affected by this value
1268 # option CYGSEM_HAL_STATIC_MMU_TABLES
1269 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1272 # Use static MMU tables.
1273 # This option defines an environment where any Memory
1274 # Management Unit (MMU) tables are constant. Normally used by ROM
1275 # based environments, this provides a way to save RAM usage which
1276 # would otherwise be required for these tables.
1278 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1280 # No user value, uncomment the following line to provide one.
1282 # value_source default
1284 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1285 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1289 # Route diagnostic output to debug channel
1290 # If not inheriting the console setup from the ROM monitor,
1291 # it is possible to redirect diagnostic output to the debug
1292 # channel by enabling this option. Depending on the debugger
1293 # used it may also be necessary to select a mangler for the
1294 # output to be displayed by the debugger.
1296 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1297 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1298 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1300 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1301 # CYGPKG_HAL_ARM == current
1302 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1303 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1304 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1310 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1311 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1312 # CYG_HAL_STARTUP == ROM
1315 # The following properties are affected by this value
1316 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1317 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1321 # Mangler used on diag output
1322 # It is sometimes necessary to mangle (encode) the
1323 # diag ASCII text output in order for it to show up at the
1324 # other end. In particular, GDB may silently ignore raw
1327 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1328 # This option is not active
1329 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1332 # No user value, uncomment the following line to provide one.
1334 # value_source default
1335 # Default value: GDB
1336 # Legal values: "GDB" "None"
1341 # HAL interrupt handling
1342 # A number of configuration options related to interrupt
1343 # handling are common to most or all HAL packages, even though
1344 # the implementations will vary from architecture to
1347 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1348 # There is no associated value.
1352 # Use separate stack for interrupts
1353 # When an interrupt occurs this interrupt can be handled either
1354 # on the current stack or on a separate stack maintained by the
1355 # HAL. Using a separate stack requires a small number of extra
1356 # instructions in the interrupt handling code, but it has the
1357 # advantage that it is no longer necessary to allow extra space
1358 # in every thread stack for the interrupt handlers. The amount
1359 # of extra space required depends on the interrupt handlers
1360 # that are being used.
1362 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1364 # No user value, uncomment the following line to provide one.
1366 # value_source default
1370 # Interrupt stack size
1371 # This configuration option specifies the stack size in bytes
1372 # for the interrupt stack. Typically this should be a multiple
1373 # of 16, but the exact requirements will vary from architecture
1374 # to architecture. The interrupt stack serves two separate
1375 # purposes. It is used as the stack during system
1376 # initialization. In addition, if the interrupt system is
1377 # configured to use a separate stack then all interrupts will
1378 # be processed on this stack. The exact memory requirements
1379 # will vary from application to application, and will depend
1380 # heavily on whether or not other interrupt-related options,
1381 # for example nested interrupts, are enabled. On most targets,
1382 # in a configuration with no kernel this stack will also be
1383 # the stack used to invoke the application, and must obviously
1384 # be appropriately large in that case.
1386 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1390 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1391 # CYGPKG_KERNEL (unknown) == 0
1393 # Legal values: 1024 to 1048576
1396 # Allow nested interrupts
1397 # When an interrupt occurs the HAL interrupt handling code can
1398 # either leave interrupts disabled for the duration of the
1399 # interrupt handling code, or by doing some extra work it can
1400 # reenable interrupts before invoking the interrupt handler and
1401 # thus allow nested interrupts to happen. If all the interrupt
1402 # handlers being used are small and do not involve any loops
1403 # then it is usually better to disallow nested interrupts.
1404 # However if any of the interrupt handlers are more complicated
1405 # than nested interrupts will usually be required.
1407 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1409 # No user value, uncomment the following line to provide one.
1411 # value_source default
1415 # Save minimum context on interrupt
1416 # The HAL interrupt handling code can exploit the calling conventions
1417 # defined for a given architecture to reduce the amount of state
1418 # that has to be saved. Generally this improves performance and
1419 # reduces code size. However it can make source-level debugging
1422 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1428 # The following properties are affected by this value
1429 # option CYGBLD_BUILD_GDB_STUBS
1430 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1431 # component CYGBLD_BUILD_REDBOOT
1432 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1435 # Chain all interrupts together
1436 # Interrupts can be attached to vectors either singly, or be
1437 # chained together. The latter is necessary if there is no way
1438 # of discovering which device has interrupted without
1439 # inspecting the device itself. It can also reduce the amount
1440 # of RAM needed for interrupt decoding tables and code.
1442 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1444 # No user value, uncomment the following line to provide one.
1446 # value_source default
1450 # Ignore spurious [fleeting] interrupts
1451 # On some hardware, interrupt sources may not be de-bounced or
1452 # de-glitched. Rather than try to handle these interrupts (no
1453 # handling may be possible), this option allows the HAL to simply
1454 # ignore them. In most cases, if the interrupt is real it will
1455 # reoccur in a detectable form.
1457 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1466 # HAL context switch support
1467 # A number of configuration options related to thread contexts
1468 # are common to most or all HAL packages, even though the
1469 # implementations will vary from architecture to architecture.
1471 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1472 # There is no associated value.
1474 # The following properties are affected by this value
1478 # Use minimum thread context
1479 # The thread context switch code can exploit the calling
1480 # conventions defined for a given architecture to reduce the
1481 # amount of state that has to be saved during a context
1482 # switch. Generally this improves performance and reduces
1483 # code size. However it can make source-level debugging more
1486 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1488 # No user value, uncomment the following line to provide one.
1490 # The inferred value should not be edited directly.
1492 # value_source inferred
1495 # The following properties are affected by this value
1496 # option CYGBLD_BUILD_GDB_STUBS
1497 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1498 # component CYGBLD_BUILD_REDBOOT
1499 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1503 # Explicit control over cache behaviour
1504 # These options let the default behaviour of the caches
1505 # be easily configurable.
1507 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1508 # There is no associated value.
1512 # Enable DATA cache on startup
1513 # Enabling this option will cause the data cache to be enabled
1514 # as soon as practicable when eCos starts up. One would choose
1515 # to disable this if the data cache cannot safely be turned on,
1516 # such as a case where the cache(s) require additional platform
1519 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1521 # No user value, uncomment the following line to provide one.
1523 # value_source default
1528 # DATA cache mode on startup
1529 # This option controls the mode the cache will be set to
1530 # when enabled on startup.
1532 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1534 # No user value, uncomment the following line to provide one.
1535 # user_value COPYBACK
1536 # value_source default
1537 # Default value: COPYBACK
1538 # Legal values: "COPYBACK" "WRITETHRU"
1542 # Enable INSTRUCTION cache on startup
1543 # Enabling this option will cause the instruction cache to be enabled
1544 # as soon as practicable when eCos starts up. One would choose
1545 # to disable this if the instruction cache cannot safely be turned on,
1546 # such as a case where the cache(s) require additional platform
1549 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1551 # No user value, uncomment the following line to provide one.
1553 # value_source default
1558 # Source-level debugging support
1559 # If the source level debugger gdb is to be used for debugging
1560 # application code then it may be necessary to configure in support
1561 # for this in the HAL.
1563 cdl_component CYGPKG_HAL_DEBUG {
1564 # There is no associated value.
1568 # Support for GDB stubs
1569 # The HAL implements GDB stubs for the target.
1571 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1572 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
1573 # This value cannot be modified here.
1577 # The following properties are affected by this value
1578 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1579 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1580 # component CYGBLD_BUILD_REDBOOT
1581 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1582 # component CYGBLD_BUILD_REDBOOT
1583 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1586 # Include GDB stubs in HAL
1587 # This option causes a set of GDB stubs to be included into the
1588 # system. On some target systems the GDB support will be
1589 # provided by other means, for example by a ROM monitor. On
1590 # other targets, especially when building a ROM-booting system,
1591 # the necessary support has to go into the target library
1592 # itself. When GDB stubs are include in a configuration, HAL
1593 # serial drivers must also be included.
1595 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1596 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1597 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1601 # No user value, uncomment the following line to provide one.
1603 # The inferred value should not be edited directly.
1605 # value_source inferred
1607 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1608 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1610 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1611 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1612 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1615 # The following properties are affected by this value
1616 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1617 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1618 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1619 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1620 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1621 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1622 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1623 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1624 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1625 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1626 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1627 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1628 # option CYGBLD_BUILD_COMMON_GDB_STUBS
1629 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1630 # option CYGPKG_HAL_GDB_FILEIO
1631 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1632 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
1633 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1634 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1635 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1636 # option CYGBLD_BUILD_GDB_STUBS
1637 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1638 # component CYGBLD_BUILD_REDBOOT
1639 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1642 # Support for external break support in GDB stubs
1643 # The HAL implements external break (or asynchronous interrupt)
1644 # in the GDB stubs for the target.
1646 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
1647 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
1648 # This value cannot be modified here.
1652 # The following properties are affected by this value
1653 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1654 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1657 # Include GDB external break support for stubs
1658 # This option causes the GDB stub to add a serial interrupt handler
1659 # which will listen for GDB break packets. This lets you stop the
1660 # target asynchronously when using GDB, usually by hitting Control+C
1661 # or pressing the STOP button. This option differs from
1662 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
1663 # GDB stubs are present.
1665 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
1666 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1667 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
1671 # No user value, uncomment the following line to provide one.
1673 # value_source default
1674 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1675 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1677 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1678 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1681 # The following properties are affected by this value
1682 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1683 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1684 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1685 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1686 # option CYGBLD_BUILD_GDB_STUBS
1687 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1688 # component CYGBLD_BUILD_REDBOOT
1689 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1692 # Platform does not support CTRLC
1694 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
1695 # No options implement this inferface
1696 # This value cannot be modified here.
1700 # The following properties are affected by this value
1701 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1702 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1705 # Include GDB external break support when no stubs
1706 # This option adds an interrupt handler for the GDB serial line
1707 # which will listen for GDB break packets. This lets you stop the
1708 # target asynchronously when using GDB, usually by hitting Control+C
1709 # or pressing the STOP button. This option differs from
1710 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
1711 # stubs are NOT present.
1713 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
1714 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1715 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1716 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1718 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1719 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1723 # No user value, uncomment the following line to provide one.
1725 # value_source default
1726 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1727 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1729 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1730 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
1733 # The following properties are affected by this value
1734 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1735 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1736 # component CYGBLD_BUILD_REDBOOT
1737 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1740 # Include GDB multi-threading debug support
1741 # This option enables some extra HAL code which is needed
1742 # to support multi-threaded source level debugging.
1744 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
1745 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
1746 # CYGSEM_HAL_ROM_MONITOR == 1
1747 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
1751 # No user value, uncomment the following line to provide one.
1753 # value_source default
1756 # The following properties are affected by this value
1757 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1758 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1759 # option CYGBLD_BUILD_GDB_STUBS
1760 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1761 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
1762 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1765 # Number of times to retry sending a $O packet
1766 # This option controls the number of attempts that eCos programs
1767 # will make to send a $O packet to a host GDB process. If it is
1768 # set non-zero, then the target process will attempt to resend the
1769 # $O packet data up to this number of retries. Caution: use of
1770 # this option is not recommended as it can thoroughly confuse the
1773 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
1775 # No user value, uncomment the following line to provide one.
1777 # value_source default
1781 # Timeout period for GDB packets
1782 # This option controls the time (in milliseconds) that eCos programs
1783 # will wait for a response when sending packets to a host GDB process.
1784 # If this time elapses, then the packet will be resent, up to some
1785 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
1787 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
1789 # No user value, uncomment the following line to provide one.
1791 # value_source default
1792 # Default value: 500
1796 # ROM monitor support
1797 # Support for ROM monitors can be built in to your application.
1798 # It may also be relevant to build your application as a ROM monitor
1799 # itself. Such options are contained here if relevant for your chosen
1800 # platform. The options and ROM monitors available to choose are
1801 # platform-dependent.
1803 cdl_component CYGPKG_HAL_ROM_MONITOR {
1804 # There is no associated value.
1806 # The following properties are affected by this value
1810 # Target has virtual vector support
1812 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
1813 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
1814 # This value cannot be modified here.
1818 # The following properties are affected by this value
1819 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1820 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1823 # Target supports baud rate control via vectors
1824 # Whether this target supports the __COMMCTL_GETBAUD
1825 # and __COMMCTL_SETBAUD virtual vector comm control operations.
1827 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
1828 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
1829 # This value cannot be modified here.
1833 # The following properties are affected by this value
1834 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
1835 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
1838 # Enable use of virtual vector calling interface
1839 # Virtual vector support allows the HAL to let the ROM
1840 # monitor handle certain operations. The virtual vector table
1841 # defines a calling interface between applications running in
1842 # RAM and the ROM monitor.
1844 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
1845 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1846 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
1849 # Calculated value: 1
1853 # The following properties are affected by this value
1854 # component CYGBLD_BUILD_REDBOOT
1855 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1859 # Inherit console settings from ROM monitor
1860 # When this option is set, the application will inherit
1861 # the console as set up by the ROM monitor. This means
1862 # that the application will use whatever channel and
1863 # mangling style was used by the ROM monitor when
1864 # the application was launched.
1866 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
1867 # This option is not active
1868 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
1869 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1873 # No user value, uncomment the following line to provide one.
1875 # value_source default
1876 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1877 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1880 # The following properties are affected by this value
1881 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1882 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1883 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1884 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1887 # Debug channel is configurable
1888 # This option is a configuration hint - it is enabled
1889 # when the HAL initialization code will make use
1890 # of the debug channel configuration option.
1892 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
1893 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1894 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1899 # Console channel is configurable
1900 # This option is a configuration hint - it is enabled
1901 # when the HAL initialization code will make use
1902 # of the console channel configuration option.
1904 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
1905 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1906 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1907 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
1912 # Initialize whole of virtual vector table
1913 # This option will cause the whole of the virtual
1914 # vector table to be initialized with dummy values on
1915 # startup. When this option is enabled, all the
1916 # options below must also be enabled - or the
1917 # table would be empty when the application
1919 # On targets where older ROM monitors without
1920 # virtual vector support may still be in use, it is
1921 # necessary for RAM applictions to initialize the
1922 # table (since all HAL diagnostics and debug IO
1923 # happens via the table).
1925 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
1929 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
1930 # CYG_HAL_STARTUP == ROM
1931 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1933 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1934 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
1936 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1937 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
1939 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1940 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
1942 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1943 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
1945 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1946 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1949 # The following properties are affected by this value
1950 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1951 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1952 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1953 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1954 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
1955 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1956 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1957 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1958 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1959 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1960 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1961 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1962 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1963 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1966 # Claim virtual vector table entries by default
1967 # By default most virtual vectors will be claimed by
1968 # RAM startup configurations, meaning that the RAM
1969 # application will provide the services. The
1970 # exception is COMMS support (HAL
1971 # diagnostics/debugging IO) which is left in the
1972 # control of the ROM monitor.
1973 # The reasoning behind this is to get as much of the
1974 # code exercised during regular development so it
1975 # is known to be working the few times a new ROM
1976 # monitor or a ROM production configuration is used
1977 # - COMMS are excluded only by necessity in order to
1978 # avoid breaking an existing debugger connections
1979 # (there may be ways around this).
1980 # For production RAM configurations this option can
1981 # be switched off, causing the appliction to rely on
1982 # the ROM monitor for these services, thus
1983 # saving some space.
1984 # Individual vectors may also be left unclaimed,
1985 # controlled by the below options (meaning that the
1986 # associated service provided by the ROM monitor
1989 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
1990 # This option is not active
1991 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1992 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1996 # No user value, uncomment the following line to provide one.
1998 # value_source default
2001 # The following properties are affected by this value
2002 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2003 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2004 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2005 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2006 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2007 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2008 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2009 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2012 # Claim reset virtual vectors
2013 # This option will cause the reset and kill_by_reset
2014 # virtual vectors to be claimed.
2016 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2020 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2021 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2022 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2025 # The following properties are affected by this value
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2027 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2030 # Claim version virtual vectors
2031 # This option will cause the version
2032 # virtual vectors to be claimed.
2034 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2038 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2039 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2043 # Claim delay_us virtual vector
2044 # This option will cause the delay_us
2045 # virtual vector to be claimed.
2047 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2051 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2052 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2053 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2056 # The following properties are affected by this value
2057 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2058 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2061 # Claim cache virtual vectors
2062 # This option will cause the cache virtual vectors
2065 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2069 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2070 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2071 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2074 # The following properties are affected by this value
2075 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2076 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2079 # Claim data virtual vectors
2080 # This option will cause the data virtual vectors
2081 # to be claimed. At present there is only one, used
2082 # by the RedBoot ethernet driver to share diag output.
2084 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2088 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2089 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2090 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2093 # The following properties are affected by this value
2094 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2095 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2098 # Claim comms virtual vectors
2099 # This option will cause the communication tables
2100 # that are part of the virtual vectors mechanism to
2101 # be claimed. Note that doing this may cause an
2102 # existing ROM monitor communication connection to
2103 # be closed. For this reason, the option is disabled
2104 # per default for normal application
2107 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2111 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2116 # The following properties are affected by this value
2117 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2118 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2119 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2120 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2121 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2122 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2123 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2124 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2127 # Do diagnostic IO via virtual vector table
2128 # All HAL IO happens via the virtual vector table / comm
2129 # tables when those tables are supported by the HAL.
2130 # If so desired, the low-level IO functions can
2131 # still be provided by the RAM application by
2132 # enabling the CLAIM_COMMS option.
2134 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2135 # Calculated value: 1
2139 # The following properties are affected by this value
2140 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2141 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2142 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2143 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2147 # Behave as a ROM monitor
2148 # Enable this option if this program is to be used as a ROM monitor,
2149 # i.e. applications will be loaded into RAM on the board, and this
2150 # ROM monitor may process exceptions or interrupts generated from the
2151 # application. This enables features such as utilizing a separate
2152 # interrupt stack when exceptions are generated.
2154 cdl_option CYGSEM_HAL_ROM_MONITOR {
2159 # Requires: CYG_HAL_STARTUP == "ROM"
2160 # CYG_HAL_STARTUP == ROM
2163 # The following properties are affected by this value
2164 # option CYGBLD_BUILD_GDB_STUBS
2165 # Requires: CYGSEM_HAL_ROM_MONITOR
2166 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2167 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2168 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2169 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2170 # option CYGPRI_REDBOOT_ROM_MONITOR
2171 # Requires: CYGSEM_HAL_ROM_MONITOR
2174 # Work with a ROM monitor
2175 # Support can be enabled for different varieties of ROM monitor.
2176 # This support changes various eCos semantics such as the encoding
2177 # of diagnostic output, or the overriding of hardware interrupt
2179 # Firstly there is "Generic" support which prevents the HAL
2180 # from overriding the hardware vectors that it does not use, to
2181 # instead allow an installed ROM monitor to handle them. This is
2182 # the most basic support which is likely to be common to most
2183 # implementations of ROM monitor.
2184 # "GDB_stubs" provides support when GDB stubs are included in
2185 # the ROM monitor or boot ROM.
2187 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2191 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2192 # CYG_HAL_STARTUP == ROM
2194 # Legal values: "Generic" "GDB_stubs"
2195 # Requires: CYG_HAL_STARTUP == "RAM"
2196 # CYG_HAL_STARTUP == ROM
2199 # The following properties are affected by this value
2200 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2201 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2202 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2203 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2204 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2205 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2206 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2207 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2211 # Platform defined I/O channels.
2212 # Platforms which provide additional I/O channels can implement
2213 # this interface, indicating that the function plf_if_init()
2214 # needs to be called.
2216 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2217 # No options implement this inferface
2218 # This value cannot be modified here.
2223 # Platform IDE I/O support.
2224 # Platforms which provide IDE controllers can implement
2225 # this interface, indicating that IDE I/O macros are
2228 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2229 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
2230 # This value cannot be modified here.
2234 # The following properties are affected by this value
2235 # component CYGPKG_REDBOOT_DISK
2236 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2239 # File I/O operations via GDB
2240 # This option enables support for various file I/O
2241 # operations using the GDB remote protocol to communicate
2242 # with GDB. The operations are then performed on the
2243 # debugging host by proxy. These operations are only
2244 # currently available by using a system call interface
2245 # to RedBoot. This may change in the future.
2247 cdl_option CYGPKG_HAL_GDB_FILEIO {
2248 # This option is not active
2249 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2250 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2254 # No user value, uncomment the following line to provide one.
2256 # value_source default
2258 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2259 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2263 # Build Compiler sanity checking tests
2264 # Enabling this option causes compiler tests to be built.
2266 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2268 # No user value, uncomment the following line to provide one.
2270 # value_source default
2273 # The following properties are affected by this value
2274 # component CYGPKG_HAL_TESTS
2275 # Calculated: "tests/context tests/basic"
2276 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2277 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2278 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2282 # This option specifies the set of tests for the common HAL.
2284 cdl_component CYGPKG_HAL_TESTS {
2285 # Calculated value: "tests/context tests/basic"
2286 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2287 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2288 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2289 # CYGINT_HAL_TESTS_NO_CACHES == 0
2290 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2291 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2293 # Current_value: tests/context tests/basic tests/cache tests/intr
2297 # Interface for cache presence
2298 # Some architectures and/or platforms do not have caches. By
2299 # implementing this interface, these can disable the various
2300 # cache-related tests.
2302 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2303 # No options implement this inferface
2304 # This value cannot be modified here.
2306 # Current value: 0 0
2308 # The following properties are affected by this value
2309 # component CYGPKG_HAL_TESTS
2310 # Calculated: "tests/context tests/basic"
2311 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2312 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2313 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2318 # The ARM architecture HAL package provides generic
2319 # support for this processor architecture. It is also
2320 # necessary to select a specific target platform HAL
2323 cdl_package CYGPKG_HAL_ARM {
2324 # Packages cannot be added or removed, nor can their version be changed,
2325 # simply by editing their value. Instead the appropriate configuration
2326 # should be used to perform these actions.
2328 # This value cannot be modified here.
2330 # Current value: 1 current
2332 # The following properties are affected by this value
2333 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2334 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2335 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2336 # ActiveIf: CYGPKG_HAL_ARM
2340 # The CPU architecture supports THUMB mode
2342 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2343 # No options implement this inferface
2344 # This value cannot be modified here.
2348 # The following properties are affected by this value
2349 # option CYGHWR_THUMB
2350 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2351 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2352 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2355 # Enable Thumb instruction set
2356 # Enable use of the Thumb instruction set.
2358 cdl_option CYGHWR_THUMB {
2359 # This option is not active
2360 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2361 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2365 # No user value, uncomment the following line to provide one.
2367 # value_source default
2370 # The following properties are affected by this value
2371 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2372 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2375 # Enable Thumb interworking compiler option
2376 # This option controls the use of -mthumb-interwork in the
2377 # compiler flags. It defaults enabled in Thumb or ROM monitor
2378 # configurations, but can be overridden for reduced memory
2379 # footprint where interworking is not a requirement.
2381 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2382 # This option is not active
2383 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2384 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2390 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2392 # CYGSEM_HAL_ROM_MONITOR == 1
2396 # The platform and architecture supports Big Endian operation
2398 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2399 # No options implement this inferface
2400 # This value cannot be modified here.
2404 # The following properties are affected by this value
2405 # option CYGHWR_HAL_ARM_BIGENDIAN
2406 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2409 # Use big-endian mode
2410 # Use the CPU in big-endian mode.
2412 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2413 # This option is not active
2414 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2415 # CYGINT_HAL_ARM_BIGENDIAN == 0
2419 # No user value, uncomment the following line to provide one.
2421 # value_source default
2425 # The platform uses a processor with an ARM7 core
2427 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2428 # No options implement this inferface
2429 # This value cannot be modified here.
2433 # The following properties are affected by this value
2434 # option CYGHWR_HAL_ARM_CPU_FAMILY
2435 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2436 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2437 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2438 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2440 # option CYGHWR_HAL_ARM_CPU_FAMILY
2441 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2442 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2443 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2444 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2448 # The platform uses a processor with an ARM9 core
2450 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2451 # No options implement this inferface
2452 # This value cannot be modified here.
2456 # The following properties are affected by this value
2457 # option CYGHWR_HAL_ARM_CPU_FAMILY
2458 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2459 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2460 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2461 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2463 # option CYGHWR_HAL_ARM_CPU_FAMILY
2464 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2465 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2466 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2467 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2471 # The platform uses a processor with a StrongARM core
2473 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2474 # No options implement this inferface
2475 # This value cannot be modified here.
2479 # The following properties are affected by this value
2480 # option CYGHWR_HAL_ARM_CPU_FAMILY
2481 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2482 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2483 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2484 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2486 # option CYGHWR_HAL_ARM_CPU_FAMILY
2487 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2488 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2489 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2490 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2494 # The platform uses a processor with a XScale core
2496 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2497 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1, active, enabled
2498 # This value cannot be modified here.
2502 # The following properties are affected by this value
2503 # option CYGHWR_HAL_ARM_CPU_FAMILY
2504 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2505 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2506 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2507 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2509 # option CYGHWR_HAL_ARM_CPU_FAMILY
2510 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2511 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2512 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2513 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2518 # It is possible to optimize code for different
2519 # ARM CPU families. This option selects which CPU to
2520 # optimize for on boards that support multiple CPU types.
2522 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2524 # No user value, uncomment the following line to provide one.
2526 # value_source default
2527 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2528 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2529 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2530 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2532 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2533 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2534 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2535 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2537 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2538 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2539 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2540 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2542 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2543 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2544 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2545 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2548 # Provide diagnostic dump for exceptions
2549 # Print messages about hardware exceptions, including
2550 # raw exception frame dump and register contents.
2552 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2554 # No user value, uncomment the following line to provide one.
2556 # value_source default
2558 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2559 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2563 # Process all exceptions with the eCos application
2564 # Normal RAM-based programs which do not include GDB stubs
2565 # defer processing of the illegal instruction exception to GDB.
2566 # Setting this options allows the program to explicitly handle
2567 # the illegal instruction exception itself. Note: this will
2568 # prevent the use of GDB to debug the application as breakpoints
2569 # will no longer work.
2571 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2573 # No user value, uncomment the following line to provide one.
2575 # value_source default
2579 # Support GDB thread operations via ICE/Multi-ICE
2580 # Allow GDB to get thread information via the ICE/Multi-ICE
2583 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2585 # No user value, uncomment the following line to provide one.
2587 # value_source default
2589 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2590 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2592 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2593 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
2595 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2596 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2600 # Support for 'gprof' callbacks
2601 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
2602 # to acquire the interrupt-context PC and SP, when this option is
2605 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
2606 # This option is not active
2607 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2608 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2610 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2611 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
2612 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
2615 # Calculated value: 1
2622 cdl_option CYGBLD_LINKER_SCRIPT {
2623 # Calculated value: "src/arm.ld"
2625 # Current_value: src/arm.ld
2628 # Implementations of hal_arm_mem_real_region_top()
2630 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
2631 # No options implement this inferface
2632 # This value cannot be modified here.
2637 # Karo Triton XScale evaluation boards
2638 # The TRITON_ECO_STK1 HAL package provides the support needed to run
2639 # eCos on a Karo TRITON ECO board located on a Starter Kit I.
2641 cdl_package CYGPKG_HAL_ARM_XSCALE_TRITON_ECO_STK1 {
2642 # Packages cannot be added or removed, nor can their version be changed,
2643 # simply by editing their value. Instead the appropriate configuration
2644 # should be used to perform these actions.
2646 # This value cannot be modified here.
2648 # Current value: 1 current
2653 # When targetting the KARO TRITON eval board it is possible to build
2654 # the system for either RAM bootstrap or ROM bootstrap(s). Select
2655 # 'ram' when building programs to load into RAM using onboard
2656 # debug software such as Angel or eCos GDB stubs. Select 'rom'
2657 # when building a stand-alone application which will be put
2658 # into ROM. Selection of 'stubs' is for the special case of
2659 # building the eCos GDB stubs themselves.
2661 cdl_component CYG_HAL_STARTUP {
2665 # Default value: RAM
2666 # Legal values: "RAM" "ROM"
2668 # The following properties are affected by this value
2669 # option CYGBLD_BUILD_GDB_STUBS
2670 # Requires: CYG_HAL_STARTUP == "ROM"
2671 # component CYGHWR_MEMORY_LAYOUT
2672 # Calculated: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_lp_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_lp_roma" : "arm_xscale_triton_lp_rom"
2673 # option CYGHWR_MEMORY_LAYOUT_LDI
2674 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_lp_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_lp_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_lp_rom.ldi>"
2675 # option CYGHWR_MEMORY_LAYOUT_H
2676 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_lp_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_lp_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_lp_rom.h>"
2677 # option CYGSEM_HAL_ROM_MONITOR
2678 # Requires: CYG_HAL_STARTUP == "ROM"
2679 # option CYGSEM_HAL_USE_ROM_MONITOR
2680 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2681 # option CYGSEM_HAL_USE_ROM_MONITOR
2682 # Requires: CYG_HAL_STARTUP == "RAM"
2683 # option CYGSEM_HAL_INSTALL_MMU_TABLES
2684 # DefaultValue: CYG_HAL_STARTUP != "RAM"
2685 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2686 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2687 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2688 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2689 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2690 # ActiveIf: CYG_HAL_STARTUP != "RAM"
2691 # option CYGPRI_REDBOOT_ROM_MONITOR
2692 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2693 # option CYGPRI_REDBOOT_ROM_MONITOR
2694 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2697 # Coexist with ARM bootloader
2698 # Enable this option if the ARM bootloader is programmed into
2699 # the FLASH boot sector on the board.
2701 cdl_option CYGSEM_HAL_ARM__XSCALE_TRITON_ARMBOOT {
2703 # No user value, uncomment the following line to provide one.
2705 # value_source default
2709 # Default console channel.
2711 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
2712 # Calculated value: 0
2715 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2716 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2719 # Number of communication channels on the board
2721 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
2722 # Calculated value: 1
2726 # The following properties are affected by this value
2727 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
2728 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2729 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2730 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2731 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2732 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2736 # This option chooses which port will be used to connect to a host
2739 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
2741 # No user value, uncomment the following line to provide one.
2743 # value_source default
2745 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2746 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2749 # Diagnostic serial port
2750 # The TRITON board has only one serial port. This option
2751 # chooses which port will be used for diagnostic output.
2753 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
2755 # No user value, uncomment the following line to provide one.
2757 # value_source default
2759 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2760 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2763 # Diagnostic serial port baud rate
2764 # This option selects the baud rate used for the diagnostic port.
2765 # Note: this should match the value chosen for the GDB port if the
2766 # diagnostic and GDB port are the same.
2768 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
2770 # No user value, uncomment the following line to provide one.
2772 # value_source default
2773 # Default value: 38400
2774 # Legal values: 9600 19200 38400 57600 115200
2777 # GDB serial port baud rate
2778 # This option selects the baud rate used for the GDB port.
2780 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
2782 # No user value, uncomment the following line to provide one.
2784 # value_source default
2785 # Default value: 38400
2786 # Legal values: 9600 19200 38400 57600 115200
2789 # Real-time clock constants
2791 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
2792 # There is no associated value.
2796 # Real-time clock numerator
2798 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
2799 # Calculated value: 1000000000
2801 # Current_value: 1000000000
2804 # Real-time clock denominator
2806 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
2807 # Calculated value: 100
2809 # Current_value: 100
2812 # Real-time clock period
2814 cdl_option CYGNUM_HAL_RTC_PERIOD {
2815 # Calculated value: 330000
2817 # Current_value: 330000
2821 # XScale TRITON build options
2822 # Package specific build options including control over
2823 # compiler flags used only in building this package,
2824 # and details of which tests are built.
2826 cdl_component CYGPKG_HAL_ARM_XSCALE_TRITON_OPTIONS {
2827 # There is no associated value.
2831 # Additional compiler flags
2832 # This option modifies the set of compiler flags for
2833 # building the XScale TRITON HAL. These flags are used
2834 # in addition to the set of global flags.
2836 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_ADD {
2838 # No user value, uncomment the following line to provide one.
2840 # value_source default
2844 # Suppressed compiler flags
2845 # This option modifies the set of compiler flags for
2846 # building the XScale TRITON HAL. These flags are
2847 # removed from the set of global flags if present.
2849 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_REMOVE {
2851 # No user value, uncomment the following line to provide one.
2853 # value_source default
2857 # XScale TRITON tests
2858 # This option specifies the set of tests for the XScale TRITON HAL.
2860 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_TESTS {
2861 # Calculated value: ""
2869 cdl_component CYGHWR_MEMORY_LAYOUT {
2870 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_lp_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_lp_roma" : "arm_xscale_triton_lp_rom"
2871 # CYG_HAL_STARTUP == ROM
2872 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2874 # Current_value: arm_xscale_triton_lp_rom
2878 # Memory layout linker script fragment
2880 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
2881 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_lp_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_lp_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_lp_rom.ldi>"
2882 # CYG_HAL_STARTUP == ROM
2883 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2885 # Current_value: <pkgconf/mlt_arm_xscale_triton_lp_rom.ldi>
2888 # Memory layout header file
2890 cdl_option CYGHWR_MEMORY_LAYOUT_H {
2891 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_lp_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_lp_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_lp_rom.h>"
2892 # CYG_HAL_STARTUP == ROM
2893 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2895 # Current_value: <pkgconf/mlt_arm_xscale_triton_lp_rom.h>
2903 # Common types and useful macros.
2904 # Tracing and assertion facilities.
2905 # Package startup options.
2907 cdl_package CYGPKG_INFRA {
2908 # Packages cannot be added or removed, nor can their version be changed,
2909 # simply by editing their value. Instead the appropriate configuration
2910 # should be used to perform these actions.
2912 # This value cannot be modified here.
2914 # Current value: 1 current
2916 # The following properties are affected by this value
2917 # package CYGPKG_HAL
2918 # Requires: CYGPKG_INFRA
2919 # component CYGBLD_BUILD_REDBOOT
2920 # Requires: CYGPKG_INFRA
2925 # The eCos source code contains a significant amount of
2926 # internal debugging support, in the form of assertions and
2928 # Assertions check at runtime that various conditions are as
2929 # expected; if not, execution is halted.
2930 # Tracing takes the form of text messages that are output
2931 # whenever certain events occur, or whenever functions are
2933 # The most important property of these checks and messages is
2934 # that they are not required for the program to run.
2935 # It is prudent to develop software with assertions enabled,
2936 # but disable them when making a product release, thus
2937 # removing the overhead of that checking.
2938 # It is possible to enable assertions and tracing
2940 # There are also options controlling the exact behaviour of
2941 # the assertion and tracing facilities, thus giving users
2942 # finer control over the code and data size requirements.
2944 cdl_component CYGPKG_INFRA_DEBUG {
2946 # No user value, uncomment the following line to provide one.
2948 # value_source default
2954 # If this option is defined, asserts in the code are tested.
2955 # Assert functions (CYG_ASSERT()) are defined in
2956 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
2957 # If it is not defined, these result in no additional
2958 # object code and no checking of the asserted conditions.
2960 cdl_component CYGDBG_USE_ASSERTS {
2961 # This option is not active
2962 # The parent CYGPKG_INFRA_DEBUG is disabled
2965 # No user value, uncomment the following line to provide one.
2967 # value_source default
2969 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2970 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
2976 # This option allows individual control of preconditions.
2977 # A precondition is one type of assert, which it is
2978 # useful to control separately from more general asserts.
2979 # The function is CYG_PRECONDITION(condition,msg).
2981 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
2982 # This option is not active
2983 # The parent CYGDBG_USE_ASSERTS is not active
2986 # No user value, uncomment the following line to provide one.
2988 # value_source default
2993 # This option allows individual control of postconditions.
2994 # A postcondition is one type of assert, which it is
2995 # useful to control separately from more general asserts.
2996 # The function is CYG_POSTCONDITION(condition,msg).
2998 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
2999 # This option is not active
3000 # The parent CYGDBG_USE_ASSERTS is not active
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3010 # This option allows individual control of loop invariants.
3011 # A loop invariant is one type of assert, which it is
3012 # useful to control separately from more general asserts,
3013 # particularly since a loop invariant is typically evaluated
3014 # a great many times when used correctly.
3015 # The function is CYG_LOOP_INVARIANT(condition,msg).
3017 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3018 # This option is not active
3019 # The parent CYGDBG_USE_ASSERTS is not active
3022 # No user value, uncomment the following line to provide one.
3024 # value_source default
3029 # All assertions within eCos contain a text message
3030 # which should give some information about the condition
3032 # These text messages will end up being embedded in the
3033 # application image and hence there is a significant penalty
3034 # in terms of image size.
3035 # It is possible to suppress the use of these messages by
3036 # disabling this option.
3037 # This results in smaller code size, but there is less
3038 # human-readable information if an assertion actually gets
3041 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3042 # This option is not active
3043 # The parent CYGDBG_USE_ASSERTS is not active
3046 # No user value, uncomment the following line to provide one.
3048 # value_source default
3054 # If this option is defined, tracing operations
3055 # result in output or logging, depending on other options.
3056 # This may have adverse effects on performance, if the time
3057 # taken to output message overwhelms the available CPU
3058 # power or output bandwidth.
3059 # Trace functions (CYG_TRACE()) are defined in
3060 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3061 # If it is not defined, these result in no additional
3062 # object code and no trace information.
3064 cdl_component CYGDBG_USE_TRACING {
3065 # This option is not active
3066 # The parent CYGPKG_INFRA_DEBUG is disabled
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3073 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3074 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3077 # The following properties are affected by this value
3078 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3079 # ActiveIf: CYGDBG_USE_TRACING
3080 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3081 # ActiveIf: CYGDBG_USE_TRACING
3082 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3083 # ActiveIf: CYGDBG_USE_TRACING
3084 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3085 # ActiveIf: CYGDBG_USE_TRACING
3086 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3087 # ActiveIf: CYGDBG_USE_TRACING
3091 # Trace function reports
3092 # This option allows individual control of
3093 # function entry/exit tracing, independent of
3094 # more general tracing output.
3095 # This may be useful to remove clutter from a
3098 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3099 # This option is not active
3100 # The parent CYGDBG_USE_TRACING is not active
3101 # The parent CYGDBG_USE_TRACING is disabled
3104 # No user value, uncomment the following line to provide one.
3106 # value_source default
3111 # All trace calls within eCos contain a text message
3112 # which should give some information about the circumstances.
3113 # These text messages will end up being embedded in the
3114 # application image and hence there is a significant penalty
3115 # in terms of image size.
3116 # It is possible to suppress the use of these messages by
3117 # disabling this option.
3118 # This results in smaller code size, but there is less
3119 # human-readable information available in the trace output,
3120 # possibly only filenames and line numbers.
3122 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3123 # This option is not active
3124 # The parent CYGDBG_USE_TRACING is not active
3125 # The parent CYGDBG_USE_TRACING is disabled
3128 # No user value, uncomment the following line to provide one.
3130 # value_source default
3135 # Trace output implementations
3137 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3138 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3139 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3140 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3141 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3142 # This option is not active
3143 # The parent CYGPKG_INFRA_DEBUG is disabled
3145 # This value cannot be modified here.
3149 # The following properties are affected by this value
3150 # component CYGDBG_USE_ASSERTS
3151 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3152 # component CYGDBG_USE_TRACING
3153 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3157 # A null output module which is useful when
3158 # debugging interactively; the output routines
3159 # can be breakpointed rather than have them actually
3160 # 'print' something.
3162 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3163 # This option is not active
3164 # The parent CYGPKG_INFRA_DEBUG is disabled
3167 # No user value, uncomment the following line to provide one.
3169 # value_source default
3174 # An output module which produces simple output
3175 # from tracing and assertion events.
3177 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3178 # This option is not active
3179 # The parent CYGPKG_INFRA_DEBUG is disabled
3182 # No user value, uncomment the following line to provide one.
3184 # value_source default
3189 # An output module which produces fancy output
3190 # from tracing and assertion events.
3192 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3193 # This option is not active
3194 # The parent CYGPKG_INFRA_DEBUG is disabled
3197 # No user value, uncomment the following line to provide one.
3199 # value_source default
3204 # An output module which buffers output
3205 # from tracing and assertion events. The stored
3206 # messages are output when an assert fires, or
3207 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3209 # Of course, there will only be stored messages
3210 # if tracing per se (CYGDBG_USE_TRACING)
3213 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3214 # This option is not active
3215 # The parent CYGPKG_INFRA_DEBUG is disabled
3218 # No user value, uncomment the following line to provide one.
3220 # value_source default
3226 # The size of the trace buffer. This counts the number
3227 # of trace records stored. When the buffer fills it
3228 # either wraps, stops recording, or generates output.
3230 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3231 # This option is not active
3232 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3233 # ActiveIf constraint: CYGDBG_USE_TRACING
3234 # CYGDBG_USE_TRACING == 0
3238 # No user value, uncomment the following line to provide one.
3240 # value_source default
3242 # Legal values: 5 to 65535
3245 # Wrap trace buffer when full
3246 # When the trace buffer has filled with records it
3247 # starts again at the beginning. Hence only the last
3248 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3251 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3252 # This option is not active
3253 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3254 # ActiveIf constraint: CYGDBG_USE_TRACING
3255 # CYGDBG_USE_TRACING == 0
3259 # No user value, uncomment the following line to provide one.
3261 # value_source default
3265 # Halt trace buffer when full
3266 # When the trace buffer has filled with records it
3267 # stops recording. Hence only the first
3268 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3271 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3272 # This option is not active
3273 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3274 # ActiveIf constraint: CYGDBG_USE_TRACING
3275 # CYGDBG_USE_TRACING == 0
3279 # No user value, uncomment the following line to provide one.
3281 # value_source default
3285 # Print trace buffer when full
3286 # When the trace buffer has filled with records it
3287 # prints the contents of the buffer. The buffer is then
3288 # emptied and the system continues.
3290 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3291 # This option is not active
3292 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3293 # ActiveIf constraint: CYGDBG_USE_TRACING
3294 # CYGDBG_USE_TRACING == 0
3298 # No user value, uncomment the following line to provide one.
3300 # value_source default
3304 # Print trace buffer on assert fail
3305 # When an assertion fails the trace buffer will be
3306 # printed to the default diagnostic device.
3308 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3309 # This option is not active
3310 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3311 # ActiveIf constraint: CYGDBG_USE_TRACING
3312 # CYGDBG_USE_TRACING == 0
3316 # No user value, uncomment the following line to provide one.
3318 # value_source default
3323 # Use function names
3324 # All trace and assert calls within eCos contain a
3325 # reference to the builtin macro '__PRETTY_FUNCTION__',
3326 # which evaluates to a string containing
3327 # the name of the current function.
3328 # This is useful when reading a trace log.
3329 # It is possible to suppress the use of the function name
3330 # by disabling this option.
3331 # This results in smaller code size, but there is less
3332 # human-readable information available in the trace output,
3333 # possibly only filenames and line numbers.
3335 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3336 # This option is not active
3337 # The parent CYGPKG_INFRA_DEBUG is disabled
3340 # No user value, uncomment the following line to provide one.
3342 # value_source default
3348 # Some packages require a startup routine to be called.
3349 # This can be carried out by application code, by supplying
3350 # a routine called cyg_package_start() which calls the
3351 # appropriate package startup routine(s).
3352 # Alternatively, this routine can be constructed automatically
3353 # and configured to call the startup routines of your choice.
3355 cdl_component CYGPKG_INFRA_STARTUP {
3356 # There is no associated value.
3360 # Start uITRON subsystem
3361 # Generate a call to initialize the
3362 # uITRON compatibility subsystem
3363 # within the system version of cyg_package_start().
3364 # This enables compatibility with uITRON.
3365 # You must configure uITRON with the correct tasks before
3366 # starting the uItron subsystem.
3367 # If this is disabled, and you want to use uITRON,
3368 # you must call cyg_uitron_start() from your own
3369 # cyg_package_start() or cyg_userstart().
3371 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
3372 # This option is not active
3373 # ActiveIf constraint: CYGPKG_UITRON
3374 # CYGPKG_UITRON (unknown) == 0
3378 # No user value, uncomment the following line to provide one.
3380 # value_source default
3382 # Requires: CYGPKG_UITRON
3383 # CYGPKG_UITRON (unknown) == 0
3388 # Smaller slower memcpy()
3389 # Enabling this option causes the implementation of
3390 # the standard memcpy() routine to reduce code
3391 # size at the expense of execution speed. This
3392 # option is automatically enabled with the use of
3393 # the -Os option to the compiler. Also note that
3394 # the compiler will try to use its own builtin
3395 # version of memcpy() if possible, ignoring the
3396 # implementation in this package, unless given
3397 # the -fno-builtin compiler option.
3399 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
3401 # No user value, uncomment the following line to provide one.
3403 # value_source default
3407 # Smaller slower memset()
3408 # Enabling this option causes the implementation of
3409 # the standard memset() routine to reduce code
3410 # size at the expense of execution speed. This
3411 # option is automatically enabled with the use of
3412 # the -Os option to the compiler. Also note that
3413 # the compiler will try to use its own builtin
3414 # version of memset() if possible, ignoring the
3415 # implementation in this package, unless given
3416 # the -fno-builtin compiler option.
3418 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
3420 # No user value, uncomment the following line to provide one.
3422 # value_source default
3426 # Provide empty C++ delete functions
3427 # To deal with virtual destructors, where the correct delete()
3428 # function must be called for the derived class in question, the
3429 # underlying delete is called when needed, from destructors. This
3430 # is regardless of whether the destructor is called by delete itself.
3431 # So there is a reference to delete() from all destructors. The
3432 # default builtin delete() attempts to call free() if there is
3433 # one defined. So, if you have destructors, and you have free(),
3434 # as in malloc() and free(), any destructor counts as a reference
3435 # to free(). So the dynamic memory allocation code is linked
3436 # in regardless of whether it gets explicitly called. This
3437 # increases code and data size needlessly.
3438 # To defeat this undesirable behaviour, we define empty versions
3439 # of delete and delete. But doing this prevents proper use
3440 # of dynamic memory in C++ programs via C++'s new and delete
3442 # Therefore, this option is provided
3443 # for explicitly disabling the provision of these empty functions,
3444 # so that new and delete can be used, if that is what is required.
3446 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
3448 # No user value, uncomment the following line to provide one.
3450 # value_source default
3454 # Provide dummy abort() function
3455 # This option controls the inclusion of a dummy abort() function.
3456 # Parts of the C and C++ compiler runtime systems contain references
3457 # to abort(), particulary in the C++ exception handling code. It is
3458 # not possible to eliminate these references, so this dummy function
3459 # in included to satisfy them. It is not expected that this function
3460 # will ever be called, so its current behaviour is to simply loop.
3462 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3467 # Default value: CYGINT_ISO_EXIT == 0
3468 # CYGINT_ISO_EXIT == 0
3470 # Requires: !CYGINT_ISO_EXIT
3471 # CYGINT_ISO_EXIT == 0
3475 # Provide dummy strlen() function
3476 # This option controls the inclusion of a dummy strlen() function.
3477 # Parts of the C and C++ compiler runtime systems contain references
3478 # to strlen(), particulary in the C++ exception handling code. It is
3479 # not possible to eliminate these references, so this dummy function
3480 # in included to satisfy them. While it is not expected that this function
3481 # will ever be called, it is functional but uses the simplest, smallest
3482 # algorithm. There is a faster version of strlen() in the C library.
3484 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
3486 # No user value, uncomment the following line to provide one.
3488 # value_source default
3489 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
3490 # CYGINT_ISO_STRING_STRFUNCS == 1
3492 # Requires: !CYGINT_ISO_STRING_STRFUNCS
3493 # CYGINT_ISO_STRING_STRFUNCS == 1
3497 # Make all compiler warnings show as errors
3498 # Enabling this option will cause all compiler warnings to show
3499 # as errors and bring the library build to a halt. This is used
3500 # to ensure that the code base is warning free, and thus ensure
3501 # that newly introduced warnings stand out and get fixed before
3502 # they show up as weird run-time behavior.
3504 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
3506 # No user value, uncomment the following line to provide one.
3508 # value_source default
3510 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
3511 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3515 # Make compiler and assembler communicate by pipe
3516 # Enabling this option will cause the compiler to feed the
3517 # assembly output the the assembler via a pipe instead of
3518 # via a temporary file. This normally reduces the build
3521 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
3523 # No user value, uncomment the following line to provide one.
3525 # value_source default
3527 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
3528 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3532 # Infra build options
3533 # Package specific build options including control over
3534 # compiler flags used only in building this package.
3536 cdl_component CYGPKG_INFRA_OPTIONS {
3537 # There is no associated value.
3541 # Additional compiler flags
3542 # This option modifies the set of compiler flags for
3543 # building the eCos infra package. These flags are used
3544 # in addition to the set of global flags.
3546 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
3548 # No user value, uncomment the following line to provide one.
3550 # value_source default
3554 # Suppressed compiler flags
3555 # This option modifies the set of compiler flags for
3556 # building the eCos infra package. These flags are removed from
3557 # the set of global flags if present.
3559 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
3561 # No user value, uncomment the following line to provide one.
3563 # value_source default
3567 # Suppressed linker flags
3568 # This option modifies the set of linker flags for
3569 # building the eCos infra package tests. These flags are removed from
3570 # the set of global flags if present.
3572 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
3574 # No user value, uncomment the following line to provide one.
3575 # user_value -Wl,--gc-sections
3576 # value_source default
3577 # Default value: -Wl,--gc-sections
3580 # Additional linker flags
3581 # This option modifies the set of linker flags for
3582 # building the eCos infra package tests. These flags are added to
3583 # the set of global flags if present.
3585 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
3587 # No user value, uncomment the following line to provide one.
3588 # user_value -Wl,--fatal-warnings
3589 # value_source default
3590 # Default value: -Wl,--fatal-warnings
3593 # Infra package tests
3595 cdl_option CYGPKG_INFRA_TESTS {
3596 # Calculated value: "tests/cxxsupp"
3598 # Current_value: tests/cxxsupp
3603 # Redboot ROM monitor
3604 # doc: ref/redboot.html
3605 # This package supports the Redboot [stand-alone debug monitor]
3606 # using eCos as the underlying board support mechanism.
3608 cdl_package CYGPKG_REDBOOT {
3609 # Packages cannot be added or removed, nor can their version be changed,
3610 # simply by editing their value. Instead the appropriate configuration
3611 # should be used to perform these actions.
3613 # This value cannot be modified here.
3615 # Current value: 1 current
3617 # The following properties are affected by this value
3618 # component CYGPKG_REDBOOT_ARM_OPTIONS
3619 # ActiveIf: CYGPKG_REDBOOT
3620 # component CYGPKG_REDBOOT_XSCALE_OPTIONS
3621 # ActiveIf: CYGPKG_REDBOOT
3622 # component CYGPKG_REDBOOT_HAL_OPTIONS
3623 # ActiveIf: CYGPKG_REDBOOT
3624 # option CYGSEM_IO_ETH_DRIVERS_WARN
3625 # ActiveIf: CYGPKG_REDBOOT
3629 # Include support for ELF file format
3631 cdl_option CYGSEM_REDBOOT_ELF {
3633 # No user value, uncomment the following line to provide one.
3635 # value_source default
3639 # Methods of loading images using redboot
3641 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
3642 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
3643 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
3644 # This value cannot be modified here.
3648 # The following properties are affected by this value
3649 # component CYGBLD_BUILD_REDBOOT
3650 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3653 # Build Redboot ROM ELF image
3654 # This option enables the building of the Redboot ELF image.
3655 # The image may require further relocation or symbol
3656 # stripping before being converted to a binary image.
3657 # This is handled by a rule in the target CDL.
3659 cdl_component CYGBLD_BUILD_REDBOOT {
3664 # Requires: CYGPKG_INFRA
3665 # CYGPKG_INFRA == current
3667 # Requires: CYGPKG_ISOINFRA
3668 # CYGPKG_ISOINFRA == current
3670 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3671 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3672 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
3674 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3675 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3676 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
3678 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
3679 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3681 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
3682 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
3684 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
3685 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
3687 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
3688 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
3690 # Requires: CYGINT_ISO_STRING_MEMFUNCS
3691 # CYGINT_ISO_STRING_MEMFUNCS == 1
3693 # Requires: CYGINT_ISO_STRING_STRFUNCS
3694 # CYGINT_ISO_STRING_STRFUNCS == 1
3696 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3697 # CYGINT_REDBOOT_LOAD_METHOD == 2
3700 # The following properties are affected by this value
3701 # option CYGBLD_BUILD_REDBOOT_BIN
3702 # ActiveIf: CYGBLD_BUILD_REDBOOT
3706 # Threads debugging support
3707 # Enabling this option will include special code in the GDB stubs to
3708 # support debugging of threaded programs. In the case of eCos programs,
3709 # this support allows GDB to have complete access to the eCos threads
3712 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
3713 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
3714 # CYG_HAL_STARTUP == ROM
3718 # No user value, uncomment the following line to provide one.
3720 # value_source default
3722 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3723 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3727 # Customized version string
3728 # Use this option to define a customized version "string" for
3729 # RedBoot. Note: this value is only cosmetic, displayed by the
3730 # "version" command, but is useful for providing site specific
3731 # information about the RedBoot configuration.
3733 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
3737 # Default value: 0 0
3740 # Enable command line editing
3741 # If this option is non-zero, RedBoot will remember the last N command
3742 # lines. These lines may be reused. Enabling this history will also
3743 # enable rudimentary editting of the lines themselves.
3745 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
3747 # No user value, uncomment the following line to provide one.
3749 # value_source default
3753 # Include support gzip/zlib decompression
3755 cdl_option CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
3756 # This option is not active
3757 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
3758 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
3762 # No user value, uncomment the following line to provide one.
3764 # value_source default
3767 # The following properties are affected by this value
3768 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
3769 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
3772 # Include support for xyzModem downloads
3773 # doc: ref/download-command.html
3775 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
3777 # No user value, uncomment the following line to provide one.
3779 # value_source default
3783 # Include MS Windows CE support
3784 # doc: ref/wince.html
3785 # This option enables MS Windows CE EShell support
3786 # and Windows CE .BIN images support
3788 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
3790 # No user value, uncomment the following line to provide one.
3792 # value_source default
3796 # Include POSIX checksum command
3797 # doc: ref/cksum-command.html
3799 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
3801 # No user value, uncomment the following line to provide one.
3803 # value_source default
3807 # Include memory fill command
3808 # doc: ref/mfill-command.html
3810 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
3812 # No user value, uncomment the following line to provide one.
3814 # value_source default
3818 # Include memory compare command
3819 # doc: ref/mcmp-command.html
3821 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
3823 # No user value, uncomment the following line to provide one.
3825 # value_source default
3829 # Include memory dump command
3830 # doc: ref/dump-command.html
3832 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
3834 # No user value, uncomment the following line to provide one.
3836 # value_source default
3840 # Include cache command
3841 # doc: ref/cache-command.html
3843 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
3845 # No user value, uncomment the following line to provide one.
3847 # value_source default
3851 # Include exec command
3852 # doc: ref/exec-command.html
3854 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
3856 # No user value, uncomment the following line to provide one.
3858 # value_source default
3861 # The following properties are affected by this value
3862 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
3863 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
3866 # Redboot Networking
3867 # This option includes networking support in RedBoot.
3869 cdl_component CYGPKG_REDBOOT_NETWORKING {
3870 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
3871 # CYGPKG_IO_ETH_DRIVERS == current
3875 # No user value, uncomment the following line to provide one.
3877 # value_source default
3880 # The following properties are affected by this value
3881 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
3882 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
3886 # Print net debug information
3887 # This option is overriden by the configuration stored in flash.
3889 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
3891 # No user value, uncomment the following line to provide one.
3893 # value_source default
3897 # Support HTTP for download
3898 # This option enables the use of the HTTP protocol for download
3900 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
3907 # Default IP address
3908 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3909 # server does not respond. The numbers should be separated by
3910 # *commas*, and not dots. If an IP address is configured into
3911 # the Flash configuration, that will be used in preference.
3913 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
3915 # No user value, uncomment the following line to provide one.
3917 # value_source default
3918 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3919 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3924 # Do not try to use BOOTP
3925 # By default Redboot tries to use BOOTP to get an IP
3926 # address. If there's no BOOTP server on your network
3927 # use this option to avoid to wait until the
3928 # timeout. This option is overriden by the
3929 # configuration stored in flash.
3931 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
3932 # This option is not active
3933 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
3936 # No user value, uncomment the following line to provide one.
3938 # value_source default
3943 # Use DHCP to get IP information
3944 # Use DHCP protocol to obtain pertinent IP addresses, such
3945 # as the client, server, gateway, etc.
3947 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
3949 # No user value, uncomment the following line to provide one.
3951 # value_source default
3955 # Use a gateway for non-local IP traffic
3956 # Enabling this option will allow the RedBoot networking
3957 # stack to use a [single] gateway to reach a non-local
3958 # IP address. If disabled, RedBoot will only be able to
3959 # reach nodes on the same subnet.
3961 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
3963 # No user value, uncomment the following line to provide one.
3965 # value_source default
3970 # Default gateway IP address
3971 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3972 # server does not respond. The numbers should be separated by
3973 # *commas*, and not dots. If an IP address is configured into
3974 # the Flash configuration, that will be used in preference.
3976 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
3978 # No user value, uncomment the following line to provide one.
3980 # value_source default
3981 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3982 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3986 # Default IP address mask
3987 # This IP address mask is the default used by RedBoot if a BOOTP/DHCP
3988 # server does not respond. The numbers should be separated by
3989 # *commas*, and not dots. If an IP address is configured into
3990 # the Flash configuration, that will be used in preference.
3992 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
3994 user_value 0 255,255,255,0
3996 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
3997 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4002 # TCP port to listen for incoming connections
4003 # RedBoot will 'listen' on this port for incoming TCP connections.
4004 # This allows outside connections to be made to the platform, either
4005 # for GDB or RedBoot commands.
4007 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4009 # No user value, uncomment the following line to provide one.
4011 # value_source default
4012 # Default value: 9000
4015 # Number of [network] packet buffers
4016 # RedBoot may need to buffer network data to support various connections.
4017 # This option allows control over the number of such buffered packets,
4018 # and in turn, controls the amount of memory used by RedBoot (which
4019 # is not available to user applications). Each packet buffer takes up
4020 # about 1514 bytes. Note: there is little need to make this larger
4023 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
4025 # No user value, uncomment the following line to provide one.
4027 # value_source default
4029 # Legal values: 3 to 8
4033 # When this option is enabled, RedBoot will be built with
4034 # support for DNS, allowing use of hostnames on the command
4037 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
4042 # Requires: CYGPKG_NS_DNS
4043 # CYGPKG_NS_DNS == current
4045 # Requires: !CYGPKG_NS_DNS_BUILD
4046 # CYGPKG_NS_DNS_BUILD == 0
4052 # This option sets the IP of the default DNS. The IP can be
4053 # changed at runtime as well.
4055 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
4056 # This option is not active
4057 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is disabled
4058 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
4059 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4063 # No user value, uncomment the following line to provide one.
4064 # user_value 0.0.0.0
4065 # value_source default
4066 # Default value: 0.0.0.0
4069 # Timeout in DNS lookup
4070 # This option sets the timeout used when looking up an
4071 # address via the DNS. Default is 10 seconds.
4073 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
4074 # This option is not active
4075 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is disabled
4078 # No user value, uncomment the following line to provide one.
4080 # value_source default
4086 # Allow RedBoot to use any I/O channel for its console.
4087 # If this option is enabled then RedBoot will attempt to use all
4088 # defined serial I/O channels for its console device. Once input
4089 # arrives at one of these channels then the console will use only
4092 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
4099 # Allow RedBoot to adjust the baud rate on the serial console.
4100 # If this option is enabled then RedBoot will support commands to set
4101 # and query the baud rate on the selected console.
4103 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
4104 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
4105 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
4109 # No user value, uncomment the following line to provide one.
4111 # value_source default
4115 # Maximum command line length
4116 # This option allows control over how long the CLI command line
4117 # should be. This space will be allocated statically
4118 # rather than from RedBoot's stack.
4120 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
4124 # Default value: 256
4127 # Command processing idle timeout (ms)
4128 # This option controls the timeout period before the
4129 # command processing is considered 'idle'. Making this
4130 # number smaller will cause idle processing to take place
4131 # more often, etc. The default value of 10ms is a reasonable
4132 # tradeoff between responsiveness and overhead.
4134 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
4136 # No user value, uncomment the following line to provide one.
4138 # value_source default
4142 # Size of zlib decompression buffer
4143 # This is the size of the buffer filled with incoming data
4144 # during load before calls are made to the decompressor
4145 # function. For ethernet downloads this can be made bigger
4146 # (at the cost of memory), but for serial downloads on slow
4147 # processors it may be necessary to reduce the size to
4148 # avoid serial overruns. zlib appears to bail out if less than
4149 # five bytes are available initially so this is the minimum.
4151 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4152 # This option is not active
4153 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4154 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
4158 # No user value, uncomment the following line to provide one.
4160 # value_source default
4162 # Legal values: 5 to 256
4165 # Validate RAM addresses during load
4166 # This option controls whether or not RedBoot will make sure that
4167 # memory being used by the "load" command is in fact in user RAM.
4168 # Leaving the option enabled makes for a safer environment, but this
4169 # check may not be valid on all platforms, thus the ability to
4170 # disable it. ** Disable this only with great care **
4172 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
4174 # No user value, uncomment the following line to provide one.
4176 # value_source default
4180 # Allow RedBoot to support FLASH programming
4181 # If this option is enabled then RedBoot will provide commands
4182 # to manage images in FLASH memory. These images can be loaded
4183 # into memory for execution or executed in place.
4185 cdl_component CYGPKG_REDBOOT_FLASH {
4186 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
4187 # CYGHWR_IO_FLASH_DEVICE == 1
4191 # No user value, uncomment the following line to provide one.
4193 # value_source default
4198 # Minimum image size
4199 # This option controls the minimum length of images kept by
4200 # the FIS. In particular, it should be large enough to hold
4201 # the RedBoot primary image itself, as well as be a natural
4202 # multiple of the FLASH erase block size.
4204 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
4206 user_value 0x00040000
4208 # Default value: 0x00020000
4211 # Offset from start of FLASH to RedBoot boot image
4212 # This option controls where the RedBoot boot image is located
4213 # relative to the start of FLASH.
4215 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
4217 # No user value, uncomment the following line to provide one.
4219 # value_source default
4220 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4221 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4223 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4224 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4225 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
4228 # The following properties are affected by this value
4229 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4230 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4231 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
4232 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4235 # Size of reserved area at start of FLASH
4236 # This option reserves an area at the start of FLASH where RedBoot
4237 # will never interfere; it is expected that this area contains
4238 # (non-RedBoot-based) POST code or some other boot monitor that
4239 # executes before RedBoot.
4241 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
4243 # No user value, uncomment the following line to provide one.
4245 # value_source default
4248 # The following properties are affected by this value
4249 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4250 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4251 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4252 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4253 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
4254 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4257 # RedBoot Flash Image System support
4258 # doc: ref/flash-image-system.html
4259 # This option enables the Flash Image System commands
4260 # and support within RedBoot. If disabled, simple Flash
4261 # access commands such as "fis write" will still exist.
4262 # This option would be disabled for targets that need simple
4263 # FLASH manipulation, but do not have the need or space for
4264 # complete image management.
4266 cdl_option CYGOPT_REDBOOT_FIS {
4268 # No user value, uncomment the following line to provide one.
4270 # value_source default
4273 # The following properties are affected by this value
4274 # component CYGPKG_REDBOOT_FIS_CONTENTS
4275 # ActiveIf: CYGOPT_REDBOOT_FIS
4276 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
4277 # ActiveIf: CYGOPT_REDBOOT_FIS
4278 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4279 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4282 # Flash Image System default directory contents
4284 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
4285 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
4286 # CYGOPT_REDBOOT_FIS == 1
4289 # Calculated value: 1
4295 # Flash block containing the Directory
4296 # Which block of flash should hold the directory
4297 # information. Positive numbers are absolute block numbers.
4298 # Negative block numbers count backwards from the last block.
4299 # eg 2 means block 2, -2 means the last but one block.
4301 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
4303 # No user value, uncomment the following line to provide one.
4305 # value_source default
4309 # Pseudo-file to describe reserved area
4310 # If an area of FLASH is reserved, it is informative to
4311 # have a fis entry describing it. This option controls
4312 # creation of such an entry by default in the fis init
4315 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
4316 # This option is not active
4317 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4318 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4322 # No user value, uncomment the following line to provide one.
4324 # value_source default
4328 # File to describe RedBoot boot image
4329 # Normally a ROM-startup RedBoot image is first in the
4330 # FLASH, and the system boots using that image. This
4331 # option controls creation of an entry describing it in
4332 # the fis init command. It might be disabled if a
4333 # platform has an immutable boot image of its own, where
4334 # we use a POST-startup RedBoot instead, which performs
4335 # less board initialization.
4337 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
4339 # No user value, uncomment the following line to provide one.
4341 # value_source default
4344 # The following properties are affected by this value
4345 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
4346 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
4349 # File to describe RedBoot POST-compatible image
4350 # This option controls creation of an entry describing a
4351 # POST-startup RedBoot image in the fis init command.
4352 # Not all platforms support POST-startup. A platform
4353 # might have both for testing purposes, where the
4354 # eventual user would substitute their own POST code for
4355 # the initial ROM-startup RedBoot, and then jump to the
4356 # POST-compatible RedBoot immediately following.
4358 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
4360 # No user value, uncomment the following line to provide one.
4362 # value_source default
4363 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
4364 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
4369 # Offset of POST image from FLASH start
4370 # This option specifies the offset for a POST image from
4371 # the start of FLASH. If unset, then the fis entry
4372 # describing the POST image will be placed where
4375 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
4376 # This option is not active
4377 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
4380 # No user value, uncomment the following line to provide one.
4382 # value_source default
4383 # Default value: 0 0
4384 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4385 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
4386 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
4389 # The following properties are affected by this value
4390 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
4391 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4395 # File to describe RedBoot backup image
4396 # This option controls creation of an entry describing a
4397 # backup RedBoot image in the fis init command.
4398 # Conventionally a RAM-startup RedBoot image is kept
4399 # under this name for use in updating the ROM-based
4400 # RedBoot that boots the board.
4402 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
4404 # No user value, uncomment the following line to provide one.
4406 # value_source default
4410 # Include ARM SIB ID in FIS
4411 # If set, this option will cause the last 5 words of
4412 # the FIS to include the special ID needed for the
4413 # flash to be recognized as a reserved area for RedBoot
4414 # by an ARM BootRom monitor.
4416 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
4418 # No user value, uncomment the following line to provide one.
4420 # value_source default
4424 # Size of FIS directory entry
4425 # The FIS directory is limited to one single flash
4426 # sector. If your flash has tiny sectors, you may wish
4427 # to reduce this value in order to get more slots in
4428 # the FIS directory.
4430 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
4432 # No user value, uncomment the following line to provide one.
4434 # value_source default
4435 # Default value: 256
4439 # Keep RedBoot configuration data in FLASH
4440 # When this option is enabled, RedBoot will keep configuration
4441 # data in a separate block of FLASH memory. This data will
4442 # include such items as the node IP address or startup scripts.
4444 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
4446 # No user value, uncomment the following line to provide one.
4448 # value_source default
4451 # The following properties are affected by this value
4452 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
4453 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4454 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
4455 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4456 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
4457 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4458 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
4459 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
4460 # option CYGFUN_REDBOOT_BOOT_SCRIPT
4461 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4465 # Length of configuration data in FLASH
4466 # This option is used to control the amount of memory and FLASH
4467 # to be used for configuration options (persistent storage).
4469 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
4471 # No user value, uncomment the following line to provide one.
4473 # value_source default
4474 # Default value: 4096
4477 # Merged config data and FIS directory
4478 # If this option is set, then the FIS directory and FLASH
4479 # configuration database will be stored in the same physical
4482 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
4483 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
4484 # CYGOPT_REDBOOT_FIS == 1
4488 # No user value, uncomment the following line to provide one.
4490 # value_source default
4494 # Which block of flash to use
4495 # Which block of flash should hold the configuration
4496 # information. Positive numbers are absolute block numbers.
4497 # Negative block numbers count backwards from the last block.
4498 # eg 2 means block 2, -2 means the last but one block.
4500 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
4502 # No user value, uncomment the following line to provide one.
4504 # value_source default
4508 # Support simple macros/aliases in FLASH
4509 # This option is used to allow support for simple text-based
4510 # macros (aliases). These aliases are kept in the FLASH
4511 # configuration data (persistent storage).
4513 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
4515 # No user value, uncomment the following line to provide one.
4517 # value_source default
4521 # Length of strings in FLASH configuration data
4522 # This option is used to control the amount of memory and FLASH
4523 # to be used for string configuration options (persistent storage).
4525 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
4527 # No user value, uncomment the following line to provide one.
4529 # value_source default
4530 # Default value: 128
4533 # Length of configuration script(s) in FLASH
4534 # This option is used to control the amount of memory and FLASH
4535 # to be used for configuration options (persistent storage).
4537 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
4539 # No user value, uncomment the following line to provide one.
4541 # value_source default
4542 # Default value: 512
4545 # Fallback to read-only FLASH configuration
4546 # This option will cause the configuration information to
4547 # revert to the readonly information stored in the FLASH.
4548 # The option only takes effect after
4549 # 1) the config_ok flag has been set to be true,
4550 # indicating that at one time the copy in RAM was valid;
4552 # 2) the information in RAM has been verified to be invalid
4554 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
4556 # No user value, uncomment the following line to provide one.
4558 # value_source default
4563 # Keep all RedBoot FLASH data blocks locked.
4564 # When this option is enabled, RedBoot will keep configuration
4565 # data and the FIS directory blocks implicitly locked. While
4566 # this is somewhat safer, it does add overhead during updates.
4568 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
4569 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
4570 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
4574 # No user value, uncomment the following line to provide one.
4576 # value_source default
4580 # Use CRC checksums on FIS images.
4581 # When this option is enabled, RedBoot will use CRC checksums
4582 # when reading and writing flash images.
4584 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
4586 # No user value, uncomment the following line to provide one.
4588 # value_source default
4592 # ARM FLASH drivers support SIB flash block structure
4593 # This interface is implemented by a flash driver
4594 # to indicate that it supports the ARM SIB flash
4597 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
4598 # No options implement this inferface
4599 # ActiveIf constraint: CYGPKG_HAL_ARM
4600 # CYGPKG_HAL_ARM == current
4603 # This value cannot be modified here.
4607 # The following properties are affected by this value
4608 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
4609 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4612 # Use ARM SIB flash block structure
4613 # This option is used to interpret ARM Flash System information
4616 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
4617 # This option is not active
4618 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4619 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
4623 # No user value, uncomment the following line to provide one.
4625 # value_source default
4630 # Allow RedBoot to support disks
4631 # If this option is enabled then RedBoot will provide commands
4632 # to load disk files.
4634 cdl_component CYGPKG_REDBOOT_DISK {
4635 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
4636 # CYGINT_HAL_PLF_IF_IDE == 1
4640 # No user value, uncomment the following line to provide one.
4642 # value_source default
4647 # Maximum number of supported disks
4648 # This option controls the number of disks supported by RedBoot.
4650 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
4652 # No user value, uncomment the following line to provide one.
4654 # value_source default
4658 # Maximum number of partitions per disk
4659 # This option controls the maximum number of supported partitions per disk.
4661 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
4663 # No user value, uncomment the following line to provide one.
4665 # value_source default
4669 # Support IDE disks.
4670 # When this option is enabled, RedBoot will support IDE disks.
4672 cdl_component CYGSEM_REDBOOT_DISK_IDE {
4674 # No user value, uncomment the following line to provide one.
4676 # value_source default
4680 # Support Linux second extended filesystems.
4681 # When this option is enabled, RedBoot will support IDE disks.
4683 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
4685 # No user value, uncomment the following line to provide one.
4687 # value_source default
4691 # Support ISO9660 filesystems.
4692 # When this option is enabled, RedBoot will support ISO9660 filesystems.
4694 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
4695 # Calculated value: 0
4702 # doc: ref/persistent-state-flash.html
4703 # This contains options related to RedBoot's boot script
4706 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
4707 # There is no associated value.
4711 # Boot scripting enabled
4712 # This option controls whether RedBoot boot script
4713 # functionality is enabled.
4715 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
4716 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4717 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
4718 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4721 # Calculated value: 1
4726 # Use default RedBoot boot script
4727 # If enabled, this option will tell RedBoot to use the value of
4728 # this option as a default boot script.
4730 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
4732 # No user value, uncomment the following line to provide one.
4734 # value_source default
4735 # Default value: 0 0
4737 # The following properties are affected by this value
4738 # option CYGFUN_REDBOOT_BOOT_SCRIPT
4739 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4742 # Resolution (in ms) for script timeout value.
4743 # This option controls the resolution of the script timeout.
4744 # The value is specified in milliseconds (ms), thus to have the
4745 # script timeout be defined in terms of tenths of seconds, use 100.
4747 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
4749 # No user value, uncomment the following line to provide one.
4751 # value_source default
4755 # Script default timeout value
4756 # This option is used to set the default timeout for startup
4757 # scripts, when they are enabled.
4759 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
4761 # No user value, uncomment the following line to provide one.
4763 # value_source default
4764 # Default value: 100
4768 # Behave like a ROM monitor
4769 # Enabling this option will allow RedBoot to provide ROM monitor-style
4770 # services to programs which it executes.
4772 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
4773 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
4774 # CYG_HAL_STARTUP == ROM
4775 # CYG_HAL_STARTUP == ROM
4778 # Calculated value: 1
4781 # Requires: CYGSEM_HAL_ROM_MONITOR
4782 # CYGSEM_HAL_ROM_MONITOR == 1
4786 # Allow RedBoot to handle GNUPro application 'syscalls'.
4787 # If this option is enabled then RedBoot will install a syscall handler
4788 # to support debugging of applications based on GNUPro newlib/bsp.
4790 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
4792 # No user value, uncomment the following line to provide one.
4794 # value_source default
4797 # The following properties are affected by this value
4798 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
4799 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4800 # option CYGPKG_HAL_GDB_FILEIO
4801 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4805 # Support additional syscalls for 'gprof' profiling
4806 # Support additional syscalls to support a periodic callback
4807 # function for histogram-style profiling, and an enquire/set
4809 # The application must use the GNUPro newlib facilities
4812 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
4813 # This option is not active
4814 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4815 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4816 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
4820 # No user value, uncomment the following line to provide one.
4822 # value_source default
4826 # Does the HAL support 'gprof' profiling?
4828 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
4829 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
4830 # This option is not active
4831 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4833 # This value cannot be modified here.
4837 # The following properties are affected by this value
4838 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
4839 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4843 # Use a common buffer for Zlib and FIS
4844 # Use a common memory buffer for both the zlib workspace
4845 # and FIS directory operations. This can save a substantial
4846 # amount of RAM, especially when flash sectors are large.
4848 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
4849 # This option is not active
4850 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4851 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 0
4852 # CYGOPT_REDBOOT_FIS == 1
4856 # No user value, uncomment the following line to provide one.
4858 # value_source default
4863 # Size of Zlib/FIS common buffer
4864 # Size of common buffer to allocate. Must be at least the
4865 # size of one flash sector.
4867 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
4868 # This option is not active
4869 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is not active
4870 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
4873 # No user value, uncomment the following line to provide one.
4874 # user_value 0x0000C000
4875 # value_source default
4876 # Default value: 0x0000C000
4877 # Legal values: 0x4000 to 0x80000000
4882 # Redboot for ARM options
4883 # This option lists the target's requirements for a valid Redboot
4886 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
4887 # ActiveIf constraint: CYGPKG_REDBOOT
4888 # CYGPKG_REDBOOT == current
4891 # There is no associated value.
4893 # The following properties are affected by this value
4897 # Provide the exec command in RedBoot
4898 # This option contains requirements for booting linux
4899 # from RedBoot. The component is enabled/disabled from
4902 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
4903 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4904 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
4907 # There is no associated value.
4911 # Physical base address of linux kernel
4912 # This is the physical address of the base of the
4913 # Linux kernel image.
4915 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
4917 user_value 0xa0008000
4919 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4920 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xa0008000
4924 # Default physical base address of linux kernel
4925 # This is the physical address of the base of the
4926 # Linux kernel image. This option gets set by the
4929 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
4931 user_value 0xa0008000
4933 # Default value: 0x00008000
4935 # The following properties are affected by this value
4936 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
4937 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4940 # Base address of linux kernel parameter tags
4941 # This is the base address of the area of memory used to
4942 # pass parameters to the Linux kernel. This should be chosen
4943 # to avoid overlap with the kernel and any ramdisk image.
4945 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
4947 user_value 0xa0001000
4949 # Default value: 0x00000100
4954 # Redboot for XScale options
4955 # This option lists the target's requirements for a valid Redboot
4958 cdl_component CYGPKG_REDBOOT_XSCALE_OPTIONS {
4959 # ActiveIf constraint: CYGPKG_REDBOOT
4960 # CYGPKG_REDBOOT == current
4963 # There is no associated value.
4966 # Redboot HAL options
4967 # This option lists the target's requirements for a valid Redboot
4970 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
4971 # ActiveIf constraint: CYGPKG_REDBOOT
4972 # CYGPKG_REDBOOT == current
4975 # There is no associated value.
4979 # Build Redboot ROM binary image
4980 # This option enables the conversion of the Redboot ELF
4981 # image to a binary image suitable for ROM programming.
4983 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
4984 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
4985 # CYGBLD_BUILD_REDBOOT == 1
4989 # No user value, uncomment the following line to provide one.
4991 # value_source default
4997 # ISO C and POSIX infrastructure
4998 # eCos supports implementations of ISO C libraries and POSIX
4999 # implementations. This package provides infrastructure used by
5000 # all such implementations.
5002 cdl_package CYGPKG_ISOINFRA {
5003 # Packages cannot be added or removed, nor can their version be changed,
5004 # simply by editing their value. Instead the appropriate configuration
5005 # should be used to perform these actions.
5007 # This value cannot be modified here.
5009 # Current value: 1 current
5011 # The following properties are affected by this value
5012 # package CYGPKG_IO_FLASH
5013 # Requires: CYGPKG_ISOINFRA
5014 # component CYGBLD_BUILD_REDBOOT
5015 # Requires: CYGPKG_ISOINFRA
5016 # package CYGPKG_LIBC_STRING
5017 # Requires: CYGPKG_ISOINFRA
5021 # Startup and termination
5023 cdl_component CYGPKG_ISO_STARTUP {
5024 # There is no associated value.
5028 # main() startup implementations
5029 # Implementations of this interface arrange for a user-supplied
5030 # main() to be called in an ISO compatible environment.
5032 cdl_interface CYGINT_ISO_MAIN_STARTUP {
5033 # No options implement this inferface
5034 # This value cannot be modified here.
5037 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
5038 # CYGINT_ISO_MAIN_STARTUP == 0
5041 # The following properties are affected by this value
5042 # interface CYGINT_ISO_MAIN_STARTUP
5043 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
5046 # environ implementations
5047 # Implementations of this interface provide the environ
5048 # variable required by POSIX.
5050 cdl_interface CYGINT_ISO_ENVIRON {
5051 # No options implement this inferface
5052 # This value cannot be modified here.
5055 # Requires: 1 >= CYGINT_ISO_ENVIRON
5056 # CYGINT_ISO_ENVIRON == 0
5059 # The following properties are affected by this value
5060 # interface CYGINT_ISO_ENVIRON
5061 # Requires: 1 >= CYGINT_ISO_ENVIRON
5067 cdl_component CYGPKG_ISO_CTYPE_H {
5068 # There is no associated value.
5072 # Number of implementations of ctype functions
5074 cdl_interface CYGINT_ISO_CTYPE {
5075 # No options implement this inferface
5076 # This value cannot be modified here.
5079 # Requires: 1 >= CYGINT_ISO_CTYPE
5080 # CYGINT_ISO_CTYPE == 0
5083 # The following properties are affected by this value
5084 # interface CYGINT_ISO_CTYPE
5085 # Requires: 1 >= CYGINT_ISO_CTYPE
5086 # option CYGFUN_LIBC_STRING_BSD_FUNCS
5087 # Requires: CYGINT_ISO_CTYPE
5088 # option CYGPKG_NS_DNS_BUILD
5089 # Requires: CYGINT_ISO_CTYPE
5092 # Ctype implementation header
5094 cdl_option CYGBLD_ISO_CTYPE_HEADER {
5096 # No user value, uncomment the following line to provide one.
5098 # value_source default
5099 # Default value: 0 0
5105 cdl_component CYGPKG_ISO_ERRNO {
5106 # There is no associated value.
5110 # Number of implementations of error codes
5112 cdl_interface CYGINT_ISO_ERRNO_CODES {
5113 # No options implement this inferface
5114 # This value cannot be modified here.
5117 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
5118 # CYGINT_ISO_ERRNO_CODES == 0
5121 # The following properties are affected by this value
5122 # interface CYGINT_ISO_ERRNO_CODES
5123 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
5126 # Error codes implementation header
5128 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
5130 # No user value, uncomment the following line to provide one.
5132 # value_source default
5133 # Default value: 0 0
5136 # Number of implementations of errno variable
5138 cdl_interface CYGINT_ISO_ERRNO {
5139 # No options implement this inferface
5140 # This value cannot be modified here.
5143 # Requires: 1 >= CYGINT_ISO_ERRNO
5144 # CYGINT_ISO_ERRNO == 0
5147 # The following properties are affected by this value
5148 # interface CYGINT_ISO_ERRNO
5149 # Requires: 1 >= CYGINT_ISO_ERRNO
5152 # errno variable implementation header
5154 cdl_option CYGBLD_ISO_ERRNO_HEADER {
5156 # No user value, uncomment the following line to provide one.
5158 # value_source default
5159 # Default value: 0 0
5163 # Locale-related functions
5165 cdl_component CYGPKG_ISO_LOCALE {
5166 # There is no associated value.
5170 # Number of implementations of locale functions
5172 cdl_interface CYGINT_ISO_LOCALE {
5173 # No options implement this inferface
5174 # This value cannot be modified here.
5177 # Requires: 1 >= CYGINT_ISO_LOCALE
5178 # CYGINT_ISO_LOCALE == 0
5181 # The following properties are affected by this value
5182 # interface CYGINT_ISO_LOCALE
5183 # Requires: 1 >= CYGINT_ISO_LOCALE
5186 # Locale implementation header
5188 cdl_option CYGBLD_ISO_LOCALE_HEADER {
5190 # No user value, uncomment the following line to provide one.
5192 # value_source default
5193 # Default value: 0 0
5197 # Standard I/O-related functionality
5199 cdl_component CYGPKG_ISO_STDIO {
5200 # There is no associated value.
5204 # Number of implementations of stdio file types
5206 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
5207 # No options implement this inferface
5208 # This value cannot be modified here.
5210 # Current value: 0 0
5211 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
5212 # CYGINT_ISO_STDIO_FILETYPES == 0
5215 # The following properties are affected by this value
5216 # interface CYGINT_ISO_STDIO_FILETYPES
5217 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
5220 # Stdio file types implementation header
5222 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
5224 # No user value, uncomment the following line to provide one.
5226 # value_source default
5227 # Default value: 0 0
5230 # Stdio standard streams implementations
5232 cdl_interface CYGINT_ISO_STDIO_STREAMS {
5233 # No options implement this inferface
5234 # This value cannot be modified here.
5236 # Current value: 0 0
5237 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
5238 # CYGINT_ISO_STDIO_STREAMS == 0
5241 # The following properties are affected by this value
5242 # interface CYGINT_ISO_STDIO_STREAMS
5243 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
5246 # Stdio standard streams implementation header
5247 # This header file must define stdin, stdout
5250 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
5252 # No user value, uncomment the following line to provide one.
5254 # value_source default
5255 # Default value: 0 0
5258 # Number of implementations of stdio file operations
5260 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
5261 # No options implement this inferface
5262 # This value cannot be modified here.
5264 # Current value: 0 0
5265 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
5266 # CYGINT_ISO_STDIO_FILEOPS == 0
5269 # The following properties are affected by this value
5270 # interface CYGINT_ISO_STDIO_FILEOPS
5271 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
5274 # Stdio file operations implementation header
5275 # This header controls the file system operations on a file
5276 # such as remove(), rename(), tmpfile(), tmpnam() and associated
5279 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
5281 # No user value, uncomment the following line to provide one.
5283 # value_source default
5284 # Default value: 0 0
5287 # Number of implementations of stdio file access functionals
5289 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
5290 # No options implement this inferface
5291 # This value cannot be modified here.
5293 # Current value: 0 0
5294 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
5295 # CYGINT_ISO_STDIO_FILEACCESS == 0
5298 # The following properties are affected by this value
5299 # interface CYGINT_ISO_STDIO_FILEACCESS
5300 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
5303 # Stdio file access implementation header
5304 # This header controls the file access operations
5305 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
5306 # setvbuf(), and associated constants.
5308 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
5310 # No user value, uncomment the following line to provide one.
5312 # value_source default
5313 # Default value: 0 0
5316 # Number of implementations of stdio formatted I/O
5318 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
5319 # No options implement this inferface
5320 # This value cannot be modified here.
5322 # Current value: 0 0
5323 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
5324 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
5327 # The following properties are affected by this value
5328 # interface CYGINT_ISO_STDIO_FORMATTED_IO
5329 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
5332 # Stdio formatted I/O implementation header
5334 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
5336 # No user value, uncomment the following line to provide one.
5338 # value_source default
5339 # Default value: 0 0
5342 # Number of implementations of stdio character I/O
5344 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
5345 # No options implement this inferface
5346 # This value cannot be modified here.
5348 # Current value: 0 0
5349 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
5350 # CYGINT_ISO_STDIO_CHAR_IO == 0
5353 # The following properties are affected by this value
5354 # interface CYGINT_ISO_STDIO_CHAR_IO
5355 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
5358 # Stdio character I/O implementation header
5360 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
5362 # No user value, uncomment the following line to provide one.
5364 # value_source default
5365 # Default value: 0 0
5368 # Number of implementations of stdio direct I/O
5370 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
5371 # No options implement this inferface
5372 # This value cannot be modified here.
5374 # Current value: 0 0
5375 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
5376 # CYGINT_ISO_STDIO_DIRECT_IO == 0
5379 # The following properties are affected by this value
5380 # interface CYGINT_ISO_STDIO_DIRECT_IO
5381 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
5384 # Stdio direct I/O implementation header
5386 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
5388 # No user value, uncomment the following line to provide one.
5390 # value_source default
5391 # Default value: 0 0
5394 # Number of implementations of stdio file positioning
5396 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
5397 # No options implement this inferface
5398 # This value cannot be modified here.
5400 # Current value: 0 0
5401 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
5402 # CYGINT_ISO_STDIO_FILEPOS == 0
5405 # The following properties are affected by this value
5406 # interface CYGINT_ISO_STDIO_FILEPOS
5407 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
5410 # Stdio file positioning implementation header
5412 cdl_option CYGBLD_ISO_STDIO_FILEPOS {
5414 # No user value, uncomment the following line to provide one.
5416 # value_source default
5417 # Default value: 0 0
5420 # Number of implementations of stdio error handling
5422 cdl_interface CYGINT_ISO_STDIO_ERROR {
5423 # No options implement this inferface
5424 # This value cannot be modified here.
5426 # Current value: 0 0
5427 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
5428 # CYGINT_ISO_STDIO_ERROR == 0
5431 # The following properties are affected by this value
5432 # interface CYGINT_ISO_STDIO_ERROR
5433 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
5436 # Stdio error handling implementation header
5438 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
5440 # No user value, uncomment the following line to provide one.
5442 # value_source default
5443 # Default value: 0 0
5446 # POSIX fd-related function implementations
5448 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
5449 # No options implement this inferface
5450 # This value cannot be modified here.
5452 # Current value: 0 0
5453 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
5454 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
5457 # The following properties are affected by this value
5458 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
5459 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
5462 # POSIX fd-related function implementation header
5464 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
5466 # No user value, uncomment the following line to provide one.
5468 # value_source default
5469 # Default value: 0 0
5473 # Standard general utility functions
5475 cdl_component CYGPKG_ISO_STDLIB {
5476 # There is no associated value.
5480 # String conversion function implementations
5482 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
5483 # No options implement this inferface
5484 # This value cannot be modified here.
5487 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5488 # CYGINT_ISO_STDLIB_STRCONV == 0
5491 # The following properties are affected by this value
5492 # interface CYGINT_ISO_STDLIB_STRCONV
5493 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5496 # String conversion function implementation header
5498 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
5500 # No user value, uncomment the following line to provide one.
5502 # value_source default
5503 # Default value: 0 0
5506 # String to FP conversion function implementations
5508 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
5509 # No options implement this inferface
5510 # This value cannot be modified here.
5513 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5514 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
5517 # The following properties are affected by this value
5518 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
5519 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5522 # String to FP conversion function implementation header
5524 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
5526 # No user value, uncomment the following line to provide one.
5528 # value_source default
5529 # Default value: 0 0
5532 # Random number generator implementations
5534 cdl_interface CYGINT_ISO_RAND {
5535 # No options implement this inferface
5536 # This value cannot be modified here.
5539 # Requires: 1 >= CYGINT_ISO_RAND
5540 # CYGINT_ISO_RAND == 0
5543 # The following properties are affected by this value
5544 # interface CYGINT_ISO_RAND
5545 # Requires: 1 >= CYGINT_ISO_RAND
5548 # Random number generator implementation header
5550 cdl_option CYGBLD_ISO_RAND_HEADER {
5552 # No user value, uncomment the following line to provide one.
5554 # value_source default
5555 # Default value: 0 0
5558 # Malloc implementations
5560 cdl_interface CYGINT_ISO_MALLOC {
5561 # No options implement this inferface
5562 # This value cannot be modified here.
5565 # Requires: 1 >= CYGINT_ISO_MALLOC
5566 # CYGINT_ISO_MALLOC == 0
5569 # The following properties are affected by this value
5570 # interface CYGINT_ISO_MALLOC
5571 # Requires: 1 >= CYGINT_ISO_MALLOC
5572 # option CYGPKG_NS_DNS_BUILD
5573 # Requires: CYGINT_ISO_MALLOC
5576 # Malloc implementation header
5578 cdl_option CYGBLD_ISO_MALLOC_HEADER {
5580 # No user value, uncomment the following line to provide one.
5582 # value_source default
5583 # Default value: 0 0
5586 # Mallinfo() implementations
5588 cdl_interface CYGINT_ISO_MALLINFO {
5589 # No options implement this inferface
5590 # This value cannot be modified here.
5593 # Requires: 1 >= CYGINT_ISO_MALLINFO
5594 # CYGINT_ISO_MALLINFO == 0
5597 # The following properties are affected by this value
5598 # interface CYGINT_ISO_MALLINFO
5599 # Requires: 1 >= CYGINT_ISO_MALLINFO
5602 # Mallinfo() implementation header
5604 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
5606 # No user value, uncomment the following line to provide one.
5608 # value_source default
5609 # Default value: 0 0
5612 # Program exit functionality implementations
5614 cdl_interface CYGINT_ISO_EXIT {
5615 # No options implement this inferface
5616 # This value cannot be modified here.
5619 # Requires: 1 >= CYGINT_ISO_EXIT
5620 # CYGINT_ISO_EXIT == 0
5623 # The following properties are affected by this value
5624 # interface CYGINT_ISO_EXIT
5625 # Requires: 1 >= CYGINT_ISO_EXIT
5626 # option CYGFUN_INFRA_DUMMY_ABORT
5627 # Requires: !CYGINT_ISO_EXIT
5628 # option CYGFUN_INFRA_DUMMY_ABORT
5629 # DefaultValue: CYGINT_ISO_EXIT == 0
5632 # Program exit functionality implementation header
5634 cdl_option CYGBLD_ISO_EXIT_HEADER {
5636 # No user value, uncomment the following line to provide one.
5638 # value_source default
5639 # Default value: 0 0
5642 # Program environment implementations
5644 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
5645 # No options implement this inferface
5646 # This value cannot be modified here.
5649 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5650 # CYGINT_ISO_STDLIB_ENVIRON == 0
5653 # The following properties are affected by this value
5654 # interface CYGINT_ISO_STDLIB_ENVIRON
5655 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5658 # Program environment implementation header
5660 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
5662 # No user value, uncomment the following line to provide one.
5664 # value_source default
5665 # Default value: 0 0
5668 # system() implementations
5670 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
5671 # No options implement this inferface
5672 # This value cannot be modified here.
5675 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5676 # CYGINT_ISO_STDLIB_SYSTEM == 0
5679 # The following properties are affected by this value
5680 # interface CYGINT_ISO_STDLIB_SYSTEM
5681 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5684 # system() implementation header
5686 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
5688 # No user value, uncomment the following line to provide one.
5690 # value_source default
5691 # Default value: 0 0
5694 # bsearch() implementations
5696 cdl_interface CYGINT_ISO_BSEARCH {
5697 # No options implement this inferface
5698 # This value cannot be modified here.
5701 # Requires: 1 >= CYGINT_ISO_BSEARCH
5702 # CYGINT_ISO_BSEARCH == 0
5705 # The following properties are affected by this value
5706 # interface CYGINT_ISO_BSEARCH
5707 # Requires: 1 >= CYGINT_ISO_BSEARCH
5710 # bsearch() implementation header
5712 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
5714 # No user value, uncomment the following line to provide one.
5716 # value_source default
5717 # Default value: 0 0
5720 # qsort() implementations
5722 cdl_interface CYGINT_ISO_QSORT {
5723 # No options implement this inferface
5724 # This value cannot be modified here.
5727 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
5728 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
5732 # qsort() implementation header
5734 cdl_option CYGBLD_ISO_QSORT_HEADER {
5736 # No user value, uncomment the following line to provide one.
5738 # value_source default
5739 # Default value: 0 0
5742 # abs()/labs() implementations
5744 cdl_interface CYGINT_ISO_ABS {
5745 # No options implement this inferface
5746 # This value cannot be modified here.
5749 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
5750 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
5754 # abs()/labs() implementation header
5756 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
5758 # No user value, uncomment the following line to provide one.
5760 # value_source default
5761 # Default value: 0 0
5764 # div()/ldiv() implementations
5766 cdl_interface CYGINT_ISO_DIV {
5767 # No options implement this inferface
5768 # This value cannot be modified here.
5771 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
5772 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
5776 # div()/ldiv() implementation header
5778 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
5780 # No user value, uncomment the following line to provide one.
5782 # value_source default
5783 # Default value: 0 0
5786 # Header defining the implementation's MB_CUR_MAX
5788 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
5790 # No user value, uncomment the following line to provide one.
5792 # value_source default
5793 # Default value: 0 0
5796 # Multibyte character implementations
5798 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
5799 # No options implement this inferface
5800 # This value cannot be modified here.
5803 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5804 # CYGINT_ISO_STDLIB_MULTIBYTE == 0
5807 # The following properties are affected by this value
5808 # interface CYGINT_ISO_STDLIB_MULTIBYTE
5809 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5812 # Multibyte character implementation header
5814 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
5816 # No user value, uncomment the following line to provide one.
5818 # value_source default
5819 # Default value: 0 0
5825 cdl_component CYGPKG_ISO_STRING {
5826 # There is no associated value.
5830 # Number of implementations of strerror() function
5832 cdl_interface CYGINT_ISO_STRERROR {
5833 # No options implement this inferface
5834 # This value cannot be modified here.
5836 # Current value: 0 0
5837 # Requires: 1 >= CYGINT_ISO_STRERROR
5838 # CYGINT_ISO_STRERROR == 0
5841 # The following properties are affected by this value
5842 # interface CYGINT_ISO_STRERROR
5843 # Requires: 1 >= CYGINT_ISO_STRERROR
5846 # strerror() implementation header
5848 cdl_option CYGBLD_ISO_STRERROR_HEADER {
5850 # No user value, uncomment the following line to provide one.
5852 # value_source default
5853 # Default value: 0 0
5856 # memcpy() implementation header
5858 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
5860 # No user value, uncomment the following line to provide one.
5862 # value_source default
5863 # Default value: 0 0
5866 # memset() implementation header
5868 cdl_option CYGBLD_ISO_MEMSET_HEADER {
5870 # No user value, uncomment the following line to provide one.
5872 # value_source default
5873 # Default value: 0 0
5876 # Number of implementations of strtok_r() function
5878 cdl_interface CYGINT_ISO_STRTOK_R {
5879 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5880 # This value cannot be modified here.
5882 # Current value: 1 1
5883 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5884 # CYGINT_ISO_STRTOK_R == 1
5887 # The following properties are affected by this value
5888 # interface CYGINT_ISO_STRTOK_R
5889 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5892 # strtok_r() implementation header
5894 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
5896 # No user value, uncomment the following line to provide one.
5898 # The inferred value should not be edited directly.
5899 inferred_value 1 <cyg/libc/string/string.h>
5900 # value_source inferred
5901 # Default value: 0 0
5903 # The following properties are affected by this value
5904 # package CYGPKG_LIBC_STRING
5905 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
5908 # Number of implementations of locale-specific string functions
5909 # This covers locale-dependent string functions such as strcoll()
5912 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
5913 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5914 # This value cannot be modified here.
5916 # Current value: 1 1
5917 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5918 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
5921 # The following properties are affected by this value
5922 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
5923 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5926 # Locale-specific string functions' implementation header
5927 # This covers locale-dependent string functions such as strcoll()
5930 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
5932 # No user value, uncomment the following line to provide one.
5934 # The inferred value should not be edited directly.
5935 inferred_value 1 <cyg/libc/string/string.h>
5936 # value_source inferred
5937 # Default value: 0 0
5939 # The following properties are affected by this value
5940 # package CYGPKG_LIBC_STRING
5941 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
5944 # Number of implementations of BSD string functions
5946 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
5947 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
5948 # This value cannot be modified here.
5950 # Current value: 0 0
5951 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5952 # CYGINT_ISO_STRING_BSD_FUNCS == 0
5955 # The following properties are affected by this value
5956 # interface CYGINT_ISO_STRING_BSD_FUNCS
5957 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5960 # BSD string functions' implementation header
5962 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
5964 # No user value, uncomment the following line to provide one.
5966 # The inferred value should not be edited directly.
5967 inferred_value 1 <cyg/libc/string/bsdstring.h>
5968 # value_source inferred
5969 # Default value: 0 0
5971 # The following properties are affected by this value
5972 # option CYGFUN_LIBC_STRING_BSD_FUNCS
5973 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
5976 # Number of implementations of other mem*() functions
5978 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
5979 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5980 # This value cannot be modified here.
5982 # Current value: 1 1
5983 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5984 # CYGINT_ISO_STRING_MEMFUNCS == 1
5987 # The following properties are affected by this value
5988 # interface CYGINT_ISO_STRING_MEMFUNCS
5989 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5990 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
5991 # Requires: CYGINT_ISO_STRING_MEMFUNCS
5992 # component CYGBLD_BUILD_REDBOOT
5993 # Requires: CYGINT_ISO_STRING_MEMFUNCS
5996 # Other mem*() functions' implementation header
5998 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
6000 # No user value, uncomment the following line to provide one.
6002 # The inferred value should not be edited directly.
6003 inferred_value 1 <cyg/libc/string/string.h>
6004 # value_source inferred
6005 # Default value: 0 0
6007 # The following properties are affected by this value
6008 # package CYGPKG_LIBC_STRING
6009 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
6012 # Number of implementations of other ISO C str*() functions
6013 # This covers the other str*() functions defined by ISO C.
6015 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
6016 # Implemented by CYGPKG_LIBC_STRING, active, enabled
6017 # This value cannot be modified here.
6019 # Current value: 1 1
6020 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
6021 # CYGINT_ISO_STRING_STRFUNCS == 1
6024 # The following properties are affected by this value
6025 # interface CYGINT_ISO_STRING_STRFUNCS
6026 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
6027 # package CYGPKG_IO_FLASH
6028 # Requires: CYGINT_ISO_STRING_STRFUNCS
6029 # component CYGPKG_IO_ETH_DRIVERS_NET
6030 # Requires: CYGINT_ISO_STRING_STRFUNCS
6031 # option CYGFUN_INFRA_DUMMY_STRLEN
6032 # Requires: !CYGINT_ISO_STRING_STRFUNCS
6033 # option CYGFUN_INFRA_DUMMY_STRLEN
6034 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
6035 # component CYGBLD_BUILD_REDBOOT
6036 # Requires: CYGINT_ISO_STRING_STRFUNCS
6037 # option CYGPKG_NS_DNS_BUILD
6038 # Requires: CYGINT_ISO_STRING_STRFUNCS
6041 # Other ISO C str*() functions' implementation header
6042 # This covers the other str*() functions defined by ISO C.
6044 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
6046 # No user value, uncomment the following line to provide one.
6048 # The inferred value should not be edited directly.
6049 inferred_value 1 <cyg/libc/string/string.h>
6050 # value_source inferred
6051 # Default value: 0 0
6053 # The following properties are affected by this value
6054 # package CYGPKG_LIBC_STRING
6055 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
6059 # Clock and time functionality
6061 cdl_component CYGPKG_ISO_TIME {
6062 # There is no associated value.
6066 # time_t implementation header
6068 cdl_option CYGBLD_ISO_TIME_T_HEADER {
6070 # No user value, uncomment the following line to provide one.
6072 # value_source default
6073 # Default value: 0 0
6076 # clock_t implementation header
6078 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
6080 # No user value, uncomment the following line to provide one.
6082 # value_source default
6083 # Default value: 0 0
6086 # struct timeval implementation header
6088 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
6090 # No user value, uncomment the following line to provide one.
6092 # value_source default
6093 # Default value: 0 0
6096 # Number of implementations of POSIX timer types
6098 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
6099 # No options implement this inferface
6100 # This value cannot be modified here.
6102 # Current value: 0 0
6103 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
6104 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
6107 # The following properties are affected by this value
6108 # interface CYGINT_ISO_POSIX_TIMER_TYPES
6109 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
6112 # POSIX timer types implementation header
6114 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
6116 # No user value, uncomment the following line to provide one.
6118 # value_source default
6119 # Default value: 0 0
6122 # Number of implementations of POSIX clock types
6124 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
6125 # No options implement this inferface
6126 # This value cannot be modified here.
6128 # Current value: 0 0
6129 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
6130 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
6133 # The following properties are affected by this value
6134 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
6135 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
6138 # POSIX clock types implementation header
6140 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
6142 # No user value, uncomment the following line to provide one.
6144 # value_source default
6145 # Default value: 0 0
6148 # Number of implementations of ISO C types
6150 cdl_interface CYGINT_ISO_C_TIME_TYPES {
6151 # No options implement this inferface
6152 # This value cannot be modified here.
6154 # Current value: 0 0
6155 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
6156 # CYGINT_ISO_C_TIME_TYPES == 0
6159 # The following properties are affected by this value
6160 # interface CYGINT_ISO_C_TIME_TYPES
6161 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
6164 # ISO C time types implementation header
6166 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
6168 # No user value, uncomment the following line to provide one.
6170 # value_source default
6171 # Default value: 0 0
6174 # Number of implementations of POSIX timers
6176 cdl_interface CYGINT_ISO_POSIX_TIMERS {
6177 # No options implement this inferface
6178 # This value cannot be modified here.
6180 # Current value: 0 0
6181 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
6182 # CYGINT_ISO_POSIX_TIMERS == 0
6185 # The following properties are affected by this value
6186 # interface CYGINT_ISO_POSIX_TIMERS
6187 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
6190 # POSIX timer implementation header
6192 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
6194 # No user value, uncomment the following line to provide one.
6196 # value_source default
6197 # Default value: 0 0
6200 # Number of implementations of POSIX clocks
6202 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
6203 # No options implement this inferface
6204 # This value cannot be modified here.
6206 # Current value: 0 0
6207 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
6208 # CYGINT_ISO_POSIX_CLOCKS == 0
6211 # The following properties are affected by this value
6212 # interface CYGINT_ISO_POSIX_CLOCKS
6213 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
6216 # POSIX clocks implementation header
6218 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
6220 # No user value, uncomment the following line to provide one.
6222 # value_source default
6223 # Default value: 0 0
6226 # Number of implementations of ISO C clock functions
6228 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
6229 # No options implement this inferface
6230 # This value cannot be modified here.
6232 # Current value: 0 0
6233 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
6234 # CYGINT_ISO_C_CLOCK_FUNCS == 0
6237 # The following properties are affected by this value
6238 # interface CYGINT_ISO_C_CLOCK_FUNCS
6239 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
6242 # ISO C clock functions' implementation header
6244 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
6246 # No user value, uncomment the following line to provide one.
6248 # value_source default
6249 # Default value: 0 0
6252 # Number of implementations of tzset() function
6254 cdl_interface CYGINT_ISO_TZSET {
6255 # No options implement this inferface
6256 # This value cannot be modified here.
6258 # Current value: 0 0
6259 # Requires: 1 >= CYGINT_ISO_TZSET
6260 # CYGINT_ISO_TZSET == 0
6263 # The following properties are affected by this value
6264 # interface CYGINT_ISO_TZSET
6265 # Requires: 1 >= CYGINT_ISO_TZSET
6268 # tzset() implementation header
6270 cdl_option CYGBLD_ISO_TZSET_HEADER {
6272 # No user value, uncomment the following line to provide one.
6274 # value_source default
6275 # Default value: 0 0
6279 # Signal functionality
6281 cdl_component CYGPKG_ISO_SIGNAL {
6282 # There is no associated value.
6286 # Number of implementations of signal numbers
6288 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
6289 # No options implement this inferface
6290 # This value cannot be modified here.
6293 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
6294 # CYGINT_ISO_SIGNAL_NUMBERS == 0
6297 # The following properties are affected by this value
6298 # interface CYGINT_ISO_SIGNAL_NUMBERS
6299 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
6302 # Signal numbering implementation header
6303 # This header provides the mapping of signal
6304 # names (e.g. SIGBUS) to numbers.
6306 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
6308 # No user value, uncomment the following line to provide one.
6310 # value_source default
6311 # Default value: 0 0
6314 # Number of signal implementations
6316 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
6317 # No options implement this inferface
6318 # This value cannot be modified here.
6321 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
6322 # CYGINT_ISO_SIGNAL_IMPL == 0
6325 # The following properties are affected by this value
6326 # interface CYGINT_ISO_SIGNAL_IMPL
6327 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
6330 # Signals implementation header
6332 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
6334 # No user value, uncomment the following line to provide one.
6336 # value_source default
6337 # Default value: 0 0
6340 # POSIX real time signals feature test macro
6341 # This defines the POSIX feature test macro
6342 # that indicates that the POSIX real time signals
6345 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
6346 # No options implement this inferface
6347 # This value cannot be modified here.
6350 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
6351 # CYGINT_POSIX_REALTIME_SIGNALS == 0
6354 # The following properties are affected by this value
6355 # interface CYGINT_POSIX_REALTIME_SIGNALS
6356 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
6360 # Non-local jumps functionality
6362 cdl_component CYGPKG_ISO_SETJMP {
6363 # There is no associated value.
6367 # setjmp() / longjmp() implementations
6369 cdl_interface CYGINT_ISO_SETJMP {
6370 # No options implement this inferface
6371 # This value cannot be modified here.
6374 # Requires: 1 >= CYGINT_ISO_SETJMP
6375 # CYGINT_ISO_SETJMP == 0
6378 # The following properties are affected by this value
6379 # interface CYGINT_ISO_SETJMP
6380 # Requires: 1 >= CYGINT_ISO_SETJMP
6383 # setjmp() / longjmp() implementation header
6385 cdl_option CYGBLD_ISO_SETJMP_HEADER {
6387 # No user value, uncomment the following line to provide one.
6389 # value_source default
6390 # Default value: 0 0
6393 # sigsetjmp() / siglongjmp() implementations
6395 cdl_interface CYGINT_ISO_SIGSETJMP {
6396 # No options implement this inferface
6397 # This value cannot be modified here.
6400 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
6401 # CYGINT_ISO_SIGSETJMP == 0
6404 # The following properties are affected by this value
6405 # interface CYGINT_ISO_SIGSETJMP
6406 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
6409 # sigsetjmp() / siglongjmp() implementation header
6411 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
6413 # No user value, uncomment the following line to provide one.
6415 # value_source default
6416 # Default value: 0 0
6420 # Assertions implementation header
6422 cdl_option CYGBLD_ISO_ASSERT_HEADER {
6424 # No user value, uncomment the following line to provide one.
6426 # value_source default
6427 # Default value: 0 0
6430 # POSIX file control
6431 # This covers the POSIX file control definitions,
6432 # normally found in <fcntl.h>
6434 cdl_component CYGPKG_ISO_POSIX_FCNTL {
6435 # There is no associated value.
6439 # POSIX open flags implementation header
6441 cdl_option CYGBLD_ISO_OFLAG_HEADER {
6443 # No user value, uncomment the following line to provide one.
6445 # value_source default
6446 # Default value: 0 0
6449 # POSIX fcntl() implementations
6451 cdl_interface CYGINT_ISO_FCNTL {
6452 # No options implement this inferface
6453 # This value cannot be modified here.
6456 # Requires: 1 >= CYGINT_ISO_FCNTL
6457 # CYGINT_ISO_FCNTL == 0
6460 # The following properties are affected by this value
6461 # interface CYGINT_ISO_FCNTL
6462 # Requires: 1 >= CYGINT_ISO_FCNTL
6465 # POSIX fcntl() implementation header
6467 cdl_option CYGBLD_ISO_FCNTL_HEADER {
6469 # No user value, uncomment the following line to provide one.
6471 # value_source default
6472 # Default value: 0 0
6475 # POSIX file open implementations
6477 cdl_interface CYGINT_ISO_OPEN {
6478 # No options implement this inferface
6479 # This value cannot be modified here.
6482 # Requires: 1 >= CYGINT_ISO_OPEN
6483 # CYGINT_ISO_OPEN == 0
6486 # The following properties are affected by this value
6487 # interface CYGINT_ISO_OPEN
6488 # Requires: 1 >= CYGINT_ISO_OPEN
6491 # POSIX file open implementation header
6493 cdl_option CYGBLD_ISO_OPEN_HEADER {
6495 # No user value, uncomment the following line to provide one.
6497 # value_source default
6498 # Default value: 0 0
6502 # <sys/stat.h> definitions implementation header
6504 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
6506 # No user value, uncomment the following line to provide one.
6508 # value_source default
6509 # Default value: 0 0
6512 # POSIX directory reading implementation
6514 cdl_interface CYGINT_ISO_DIRENT {
6515 # No options implement this inferface
6516 # This value cannot be modified here.
6519 # Requires: 1 >= CYGINT_ISO_DIRENT
6520 # CYGINT_ISO_DIRENT == 0
6523 # The following properties are affected by this value
6524 # interface CYGINT_ISO_DIRENT
6525 # Requires: 1 >= CYGINT_ISO_DIRENT
6528 # <dirent.h> definitions implementation header
6530 cdl_option CYGBLD_ISO_DIRENT_HEADER {
6532 # No user value, uncomment the following line to provide one.
6534 # value_source default
6535 # Default value: 0 0
6538 # POSIX <sys/types.h> contents
6539 # This covers the types required by POSIX to be in
6542 cdl_component CYGPKG_ISO_POSIX_TYPES {
6543 # There is no associated value.
6547 # POSIX thread types implementations
6549 cdl_interface CYGINT_ISO_PTHREADTYPES {
6550 # No options implement this inferface
6551 # This value cannot be modified here.
6554 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6555 # CYGINT_ISO_PTHREADTYPES == 0
6558 # The following properties are affected by this value
6559 # interface CYGINT_ISO_PTHREADTYPES
6560 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6561 # interface CYGINT_ISO_PMUTEXTYPES
6562 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6565 # POSIX thread types implementation header
6567 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
6569 # No user value, uncomment the following line to provide one.
6571 # value_source default
6572 # Default value: 0 0
6575 # POSIX mutex types implementations
6577 cdl_interface CYGINT_ISO_PMUTEXTYPES {
6578 # No options implement this inferface
6579 # This value cannot be modified here.
6582 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6583 # CYGINT_ISO_PTHREADTYPES == 0
6587 # POSIX mutex types implementation header
6589 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
6591 # No user value, uncomment the following line to provide one.
6593 # value_source default
6594 # Default value: 0 0
6597 # ssize_t implementation header
6599 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
6601 # No user value, uncomment the following line to provide one.
6603 # value_source default
6604 # Default value: 0 0
6607 # Filesystem types implementation header
6609 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
6611 # No user value, uncomment the following line to provide one.
6613 # value_source default
6614 # Default value: 0 0
6617 # gid_t, pid_t, uid_t implementation header
6619 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
6621 # No user value, uncomment the following line to provide one.
6623 # value_source default
6624 # Default value: 0 0
6628 # Non-POSIX <sys/types.h> contents
6629 # This covers the extra types required by non-POSIX
6630 # packages to be in <sys/types.h>. These would normally
6631 # only be visible if _POSIX_SOURCE is not defined.
6633 cdl_component CYGPKG_ISO_EXTRA_TYPES {
6634 # There is no associated value.
6638 # BSD compatible types
6640 cdl_interface CYGINT_ISO_BSDTYPES {
6641 # No options implement this inferface
6642 # This value cannot be modified here.
6645 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6646 # CYGINT_ISO_BSDTYPES == 0
6649 # The following properties are affected by this value
6650 # interface CYGINT_ISO_BSDTYPES
6651 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6656 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
6658 # No user value, uncomment the following line to provide one.
6660 # value_source default
6661 # Default value: 0 0
6667 cdl_component CYGPKG_ISO_UTSNAME {
6668 # There is no associated value.
6674 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
6676 # No user value, uncomment the following line to provide one.
6678 # value_source default
6679 # Default value: 0 0
6685 cdl_component CYGPKG_ISO_SCHED {
6686 # There is no associated value.
6690 # POSIX scheduler implementations
6692 cdl_interface CYGINT_ISO_SCHED_IMPL {
6693 # No options implement this inferface
6694 # This value cannot be modified here.
6697 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6698 # CYGINT_ISO_SCHED_IMPL == 0
6701 # The following properties are affected by this value
6702 # interface CYGINT_ISO_SCHED_IMPL
6703 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6706 # POSIX scheduler implementation header
6708 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
6710 # No user value, uncomment the following line to provide one.
6712 # value_source default
6713 # Default value: 0 0
6719 cdl_component CYGPKG_ISO_SEMAPHORES {
6720 # There is no associated value.
6724 # POSIX semaphore implementations
6726 cdl_interface CYGINT_ISO_SEMAPHORES {
6727 # No options implement this inferface
6728 # This value cannot be modified here.
6731 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6732 # CYGINT_ISO_SEMAPHORES == 0
6735 # The following properties are affected by this value
6736 # interface CYGINT_ISO_SEMAPHORES
6737 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6740 # POSIX semaphore implementation header
6742 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
6744 # No user value, uncomment the following line to provide one.
6746 # value_source default
6747 # Default value: 0 0
6751 # POSIX message queues
6753 cdl_component CYGPKG_ISO_MQUEUE {
6754 # There is no associated value.
6760 cdl_interface CYGINT_ISO_MQUEUE {
6761 # No options implement this inferface
6762 # This value cannot be modified here.
6765 # Requires: 1 >= CYGINT_ISO_MQUEUE
6766 # CYGINT_ISO_MQUEUE == 0
6769 # The following properties are affected by this value
6770 # interface CYGINT_ISO_MQUEUE
6771 # Requires: 1 >= CYGINT_ISO_MQUEUE
6772 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
6773 # ActiveIf: CYGINT_ISO_MQUEUE
6774 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
6775 # ActiveIf: CYGINT_ISO_MQUEUE
6778 # Implementation header
6780 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
6782 # No user value, uncomment the following line to provide one.
6784 # value_source default
6785 # Default value: 0 0
6788 # Maximum number of open message queues
6790 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
6791 # This option is not active
6792 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6793 # CYGINT_ISO_MQUEUE == 0
6797 # No user value, uncomment the following line to provide one.
6799 # value_source default
6800 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
6801 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6802 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6806 # Maximum number of message priorities
6808 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
6809 # This option is not active
6810 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6811 # CYGINT_ISO_MQUEUE == 0
6815 # No user value, uncomment the following line to provide one.
6816 # user_value 1 65535
6817 # value_source default
6818 # Default value: 1 65535
6824 cdl_component CYGPKG_ISO_PTHREAD {
6825 # There is no associated value.
6829 # POSIX pthread implementations
6831 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
6832 # No options implement this inferface
6833 # This value cannot be modified here.
6835 # Current value: 0 0
6836 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6837 # CYGINT_ISO_PTHREAD_IMPL == 0
6840 # The following properties are affected by this value
6841 # interface CYGINT_ISO_PTHREAD_IMPL
6842 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6845 # POSIX pthread implementation header
6847 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
6849 # No user value, uncomment the following line to provide one.
6851 # value_source default
6852 # Default value: 0 0
6855 # POSIX mutex/cond var implementations
6857 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
6858 # No options implement this inferface
6859 # This value cannot be modified here.
6861 # Current value: 0 0
6862 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6863 # CYGINT_ISO_PTHREAD_MUTEX == 0
6866 # The following properties are affected by this value
6867 # interface CYGINT_ISO_PTHREAD_MUTEX
6868 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6871 # POSIX mutex/cond var implementation header
6873 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
6875 # No user value, uncomment the following line to provide one.
6877 # value_source default
6878 # Default value: 0 0
6884 cdl_component CYGPKG_ISO_LIMITS {
6885 # There is no associated value.
6889 # POSIX pthread limits implementations
6891 cdl_interface CYGINT_ISO_POSIX_LIMITS {
6892 # No options implement this inferface
6893 # This value cannot be modified here.
6896 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6897 # CYGINT_ISO_POSIX_LIMITS == 0
6900 # The following properties are affected by this value
6901 # interface CYGINT_ISO_POSIX_LIMITS
6902 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6905 # POSIX pthread limits implementation header
6907 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
6909 # No user value, uncomment the following line to provide one.
6911 # value_source default
6912 # Default value: 0 0
6915 # OPEN_MAX implementation header
6917 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
6919 # No user value, uncomment the following line to provide one.
6921 # value_source default
6922 # Default value: 0 0
6925 # LINK_MAX implementation header
6927 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
6929 # No user value, uncomment the following line to provide one.
6931 # value_source default
6932 # Default value: 0 0
6935 # NAME_MAX implementation header
6937 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
6939 # No user value, uncomment the following line to provide one.
6941 # value_source default
6942 # Default value: 0 0
6945 # PATH_MAX implementation header
6947 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
6949 # No user value, uncomment the following line to provide one.
6951 # value_source default
6952 # Default value: 0 0
6958 cdl_component CYGPKG_ISO_TERMIOS {
6959 # There is no associated value.
6963 # POSIX termios implementations
6965 cdl_interface CYGINT_ISO_TERMIOS {
6966 # No options implement this inferface
6967 # This value cannot be modified here.
6970 # Requires: 1 >= CYGINT_ISO_TERMIOS
6971 # CYGINT_ISO_TERMIOS == 0
6974 # The following properties are affected by this value
6975 # interface CYGINT_ISO_TERMIOS
6976 # Requires: 1 >= CYGINT_ISO_TERMIOS
6979 # POSIX termios implementation header
6981 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
6983 # No user value, uncomment the following line to provide one.
6985 # value_source default
6986 # Default value: 0 0
6992 cdl_component CYGPKG_ISO_DLFCN {
6993 # There is no associated value.
6997 # Dynamic load implementations
6999 cdl_interface CYGINT_ISO_DLFCN {
7000 # No options implement this inferface
7001 # This value cannot be modified here.
7004 # Requires: 1 >= CYGINT_ISO_DLFCN
7005 # CYGINT_ISO_DLFCN == 0
7008 # The following properties are affected by this value
7009 # interface CYGINT_ISO_DLFCN
7010 # Requires: 1 >= CYGINT_ISO_DLFCN
7013 # Dynamic load implementation header
7015 cdl_option CYGBLD_ISO_DLFCN_HEADER {
7017 # No user value, uncomment the following line to provide one.
7019 # value_source default
7020 # Default value: 0 0
7024 # UNIX standard functions
7026 cdl_component CYGPKG_ISO_UNISTD {
7027 # There is no associated value.
7031 # POSIX timer operations implementations
7033 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
7034 # No options implement this inferface
7035 # This value cannot be modified here.
7037 # Current value: 0 0
7038 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
7039 # CYGINT_ISO_POSIX_TIMER_OPS == 0
7042 # The following properties are affected by this value
7043 # interface CYGINT_ISO_POSIX_TIMER_OPS
7044 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
7047 # POSIX timer operations implementation header
7049 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
7051 # No user value, uncomment the following line to provide one.
7053 # value_source default
7054 # Default value: 0 0
7057 # POSIX sleep() implementations
7059 cdl_interface CYGINT_ISO_POSIX_SLEEP {
7060 # No options implement this inferface
7061 # This value cannot be modified here.
7063 # Current value: 0 0
7064 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
7065 # CYGINT_ISO_POSIX_SLEEP == 0
7068 # The following properties are affected by this value
7069 # interface CYGINT_ISO_POSIX_SLEEP
7070 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
7073 # POSIX sleep() implementation header
7075 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
7077 # No user value, uncomment the following line to provide one.
7079 # value_source default
7080 # Default value: 0 0
7084 # select()/poll() functions
7086 cdl_component CYGPKG_ISO_SELECT {
7087 # There is no associated value.
7091 # select() implementations
7093 cdl_interface CYGINT_ISO_SELECT {
7094 # No options implement this inferface
7095 # This value cannot be modified here.
7097 # Current value: 0 0
7098 # Requires: 1 >= CYGINT_ISO_SELECT
7099 # CYGINT_ISO_SELECT == 0
7102 # The following properties are affected by this value
7103 # interface CYGINT_ISO_SELECT
7104 # Requires: 1 >= CYGINT_ISO_SELECT
7107 # select() implementation header
7109 cdl_option CYGBLD_ISO_SELECT_HEADER {
7111 # No user value, uncomment the following line to provide one.
7113 # value_source default
7114 # Default value: 0 0
7117 # poll() implementations
7119 cdl_interface CYGINT_ISO_POLL {
7120 # No options implement this inferface
7121 # This value cannot be modified here.
7123 # Current value: 0 0
7124 # Requires: 1 >= CYGINT_ISO_POLL
7125 # CYGINT_ISO_POLL == 0
7128 # The following properties are affected by this value
7129 # interface CYGINT_ISO_POLL
7130 # Requires: 1 >= CYGINT_ISO_POLL
7133 # poll() implementation header
7135 cdl_option CYGBLD_ISO_POLL_HEADER {
7137 # No user value, uncomment the following line to provide one.
7139 # value_source default
7140 # Default value: 0 0
7144 # NetDB utility functions
7146 cdl_component CYGPKG_ISO_NETDB {
7147 # There is no associated value.
7151 # DNS implementations
7153 cdl_interface CYGINT_ISO_DNS {
7154 # Implemented by CYGPKG_NS_DNS_BUILD, active, disabled
7155 # This value cannot be modified here.
7158 # Requires: 1 >= CYGINT_ISO_DNS
7159 # CYGINT_ISO_DNS == 0
7162 # The following properties are affected by this value
7163 # interface CYGINT_ISO_DNS
7164 # Requires: 1 >= CYGINT_ISO_DNS
7167 # DNS implementation header
7169 cdl_option CYGBLD_ISO_DNS_HEADER {
7171 # No user value, uncomment the following line to provide one.
7173 # The inferred value should not be edited directly.
7174 inferred_value 1 <cyg/ns/dns/dns.h>
7175 # value_source inferred
7176 # Default value: 0 0
7178 # The following properties are affected by this value
7179 # option CYGPKG_NS_DNS_BUILD
7180 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
7183 # Protocol network database implementations
7185 cdl_interface CYGINT_ISO_NETDB_PROTO {
7186 # No options implement this inferface
7187 # This value cannot be modified here.
7190 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
7191 # CYGINT_ISO_NETDB_PROTO == 0
7194 # The following properties are affected by this value
7195 # interface CYGINT_ISO_NETDB_PROTO
7196 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
7199 # Protocol network database implementation header
7201 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
7203 # No user value, uncomment the following line to provide one.
7205 # value_source default
7206 # Default value: 0 0
7209 # Services network database implementations
7211 cdl_interface CYGINT_ISO_NETDB_SERV {
7212 # No options implement this inferface
7213 # This value cannot be modified here.
7216 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
7217 # CYGINT_ISO_NETDB_SERV == 0
7220 # The following properties are affected by this value
7221 # interface CYGINT_ISO_NETDB_SERV
7222 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
7225 # Services network database implementation header
7227 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
7229 # No user value, uncomment the following line to provide one.
7231 # value_source default
7232 # Default value: 0 0
7237 # Package specific build options including control over
7238 # compiler flags used only in building this package,
7239 # and details of which tests are built.
7241 cdl_component CYGPKG_ISOINFRA_OPTIONS {
7242 # There is no associated value.
7246 # Additional compiler flags
7247 # This option modifies the set of compiler flags for
7248 # building the ISO C and POSIX infrastructure package.
7249 # These flags are used in addition to the set of global flags.
7251 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
7253 # No user value, uncomment the following line to provide one.
7255 # value_source default
7259 # Suppressed compiler flags
7260 # This option modifies the set of compiler flags for
7261 # building the ISO C and POSIX infrastructure package.
7262 # These flags are removed from the set of global flags
7265 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
7267 # No user value, uncomment the following line to provide one.
7269 # value_source default
7276 # doc: ref/net-ns-dns.html
7278 cdl_package CYGPKG_NS_DNS {
7279 # Packages cannot be added or removed, nor can their version be changed,
7280 # simply by editing their value. Instead the appropriate configuration
7281 # should be used to perform these actions.
7283 # This value cannot be modified here.
7285 # Current value: 1 current
7287 # The following properties are affected by this value
7288 # component CYGPKG_REDBOOT_NETWORKING_DNS
7289 # Requires: CYGPKG_NS_DNS
7293 # Build DNS NS client package
7295 cdl_option CYGPKG_NS_DNS_BUILD {
7297 # No user value, uncomment the following line to provide one.
7299 # The inferred value should not be edited directly.
7301 # value_source inferred
7303 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
7304 # CYGBLD_ISO_DNS_HEADER == <cyg/ns/dns/dns.h>
7306 # Requires: CYGPKG_NET
7307 # CYGPKG_NET (unknown) == 0
7309 # Requires: CYGINT_ISO_CTYPE
7310 # CYGINT_ISO_CTYPE == 0
7312 # Requires: CYGINT_ISO_MALLOC
7313 # CYGINT_ISO_MALLOC == 0
7315 # Requires: CYGINT_ISO_STRING_STRFUNCS
7316 # CYGINT_ISO_STRING_STRFUNCS == 1
7318 # Requires: CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD
7319 # CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD (unknown) == 0
7322 # The following properties are affected by this value
7323 # component CYGPKG_NS_DNS_DEFAULT
7324 # ActiveIf: CYGPKG_NS_DNS_BUILD
7325 # component CYGPKG_NS_DNS_DOMAINNAME
7326 # ActiveIf: CYGPKG_NS_DNS_BUILD
7327 # option CYGPKG_NS_DNS_TESTS
7328 # ActiveIf: CYGPKG_NS_DNS_BUILD
7329 # component CYGPKG_REDBOOT_NETWORKING_DNS
7330 # Requires: !CYGPKG_NS_DNS_BUILD
7333 # Provide a hard coded default server address
7334 # This option controls the use of a default, hard coded DNS
7335 # server. When this is enabled, the IP address in the CDL
7336 # option CYGDAT_NS_DNS_DEFAULT_SERVER is used in
7337 # init_all_network_interfaces() to start the resolver using
7338 # the specified server. The DHCP client or user code may
7339 # override this by restarting the resolver.
7341 cdl_component CYGPKG_NS_DNS_DEFAULT {
7342 # This option is not active
7343 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7344 # CYGPKG_NS_DNS_BUILD == 0
7348 # No user value, uncomment the following line to provide one.
7350 # value_source default
7355 # IP address of the default DNS server
7357 cdl_option CYGDAT_NS_DNS_DEFAULT_SERVER {
7358 # This option is not active
7359 # The parent CYGPKG_NS_DNS_DEFAULT is not active
7360 # The parent CYGPKG_NS_DNS_DEFAULT is disabled
7363 # No user value, uncomment the following line to provide one.
7364 # user_value 192.168.1.1
7365 # value_source default
7366 # Default value: 192.168.1.1
7370 # Provide a hard coded default domain name
7371 # This option controls the use of a default, hard coded
7372 # domain name to be used when querying a DNS server. When
7373 # this is enabled, the name in the CDL option
7374 # CYGDAT_NS_DNS_DOMAINNAME_NAME is used in
7375 # init_all_network_interfaces() to set the domain name as
7376 # accessed by getdomainname().
7378 cdl_component CYGPKG_NS_DNS_DOMAINNAME {
7379 # This option is not active
7380 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7381 # CYGPKG_NS_DNS_BUILD == 0
7385 # No user value, uncomment the following line to provide one.
7387 # value_source default
7392 # Domain name for this device
7394 cdl_option CYGDAT_NS_DNS_DOMAINNAME_NAME {
7395 # This option is not active
7396 # The parent CYGPKG_NS_DNS_DOMAINNAME is not active
7397 # The parent CYGPKG_NS_DNS_DOMAINNAME is disabled
7400 # No user value, uncomment the following line to provide one.
7401 # user_value default.domain.com
7402 # value_source default
7403 # Default value: default.domain.com
7407 # DNS support build options
7409 cdl_component CYGPKG_NS_DNS_OPTIONS {
7410 # There is no associated value.
7414 # Additional compiler flags
7415 # This option modifies the set of compiler flags for
7416 # building the DNS package.
7417 # These flags are used in addition
7418 # to the set of global flags.
7420 cdl_option CYGPKG_NS_DNS_CFLAGS_ADD {
7422 # No user value, uncomment the following line to provide one.
7423 # user_value "-D_KERNEL -D__ECOS"
7424 # value_source default
7425 # Default value: "-D_KERNEL -D__ECOS"
7428 # Suppressed compiler flags
7429 # This option modifies the set of compiler flags for
7430 # building the DNS package. These flags are removed from
7431 # the set of global flags if present.
7433 cdl_option CYGPKG_NS_DNS_CFLAGS_REMOVE {
7435 # No user value, uncomment the following line to provide one.
7437 # value_source default
7443 # This option specifies the set of tests for the DNS package.
7445 cdl_option CYGPKG_NS_DNS_TESTS {
7446 # This option is not active
7447 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7448 # CYGPKG_NS_DNS_BUILD == 0
7451 # Calculated value: "tests/dns1 tests/dns2"
7453 # Current_value: tests/dns1 tests/dns2
7458 # doc: ref/services-crc.html
7459 # This package provides support for CRC calculation. Currently
7460 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
7461 # Gary S. Brown, and a 16 bit CRC.
7463 cdl_package CYGPKG_CRC {
7464 # Packages cannot be added or removed, nor can their version be changed,
7465 # simply by editing their value. Instead the appropriate configuration
7466 # should be used to perform these actions.
7468 # This value cannot be modified here.
7470 # Current value: 1 current
7476 cdl_option CYGPKG_CRC_TESTS {
7477 # Calculated value: "tests/crc_test"
7479 # Current_value: tests/crc_test