1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
30 hardware triton_etn_stk2 ;
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2 current ;
34 package -hardware CYGPKG_IO_FLASH current ;
35 package -hardware CYGPKG_DEVS_FLASH_STRATA current ;
36 package -hardware CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON current ;
37 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
38 package -hardware CYGPKG_DEVS_ETH_SMSC_LAN91C111 current ;
39 package -hardware CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON current ;
40 package CYGPKG_HAL current ;
41 package CYGPKG_INFRA current ;
42 package CYGPKG_REDBOOT current ;
43 package CYGPKG_ISOINFRA current ;
44 package CYGPKG_LIBC_STRING current ;
45 package CYGPKG_NS_DNS current ;
46 package CYGPKG_CRC current ;
49 # ---- conflicts -------------------------------------------------------
50 # There are no conflicts.
52 # ---- contents --------------------------------------------------------
55 # Global build options
56 # Global build options including control over
57 # compiler flags, linker flags and choice of toolchain.
59 cdl_component CYGBLD_GLOBAL_OPTIONS {
60 # There is no associated value.
62 # The following properties are affected by this value
66 # Global command prefix
67 # This option specifies the command prefix used when
68 # invoking the build tools.
70 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
74 # Default value: xscale-elf
77 # Global compiler flags
78 # This option controls the global compiler flags which are used to
79 # compile all packages by default. Individual packages may define
80 # options which override these global flags.
82 cdl_option CYGBLD_GLOBAL_CFLAGS {
84 # No user value, uncomment the following line to provide one.
85 # user_value "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
86 # value_source default
87 # Default value: "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
89 # The following properties are affected by this value
90 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
91 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
92 # option CYGBLD_INFRA_CFLAGS_PIPE
93 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
97 # This option controls the global linker flags. Individual
98 # packages may define options which override these global flags.
100 cdl_option CYGBLD_GLOBAL_LDFLAGS {
102 # No user value, uncomment the following line to provide one.
103 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
104 # value_source default
105 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
108 # Build GDB stub ROM image
109 # This option enables the building of the GDB stubs for the
110 # board. The common HAL controls takes care of most of the
111 # build process, but the final conversion from ELF image to
112 # binary data is handled by the platform CDL, allowing
113 # relocation of the data if necessary.
115 cdl_option CYGBLD_BUILD_GDB_STUBS {
117 # No user value, uncomment the following line to provide one.
119 # value_source default
121 # Requires: CYG_HAL_STARTUP == "ROM"
122 # CYG_HAL_STARTUP == ROM
124 # Requires: CYGSEM_HAL_ROM_MONITOR
125 # CYGSEM_HAL_ROM_MONITOR == 1
127 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
128 # CYGBLD_BUILD_COMMON_GDB_STUBS == 0
130 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
131 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
133 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
134 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
136 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
137 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
139 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
140 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
142 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
143 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
147 # Build common GDB stub ROM image
148 # Unless a target board has specific requirements to the
149 # stub implementation, it can use a simple common stub.
150 # This option, which gets enabled by platform HALs as
151 # appropriate, controls the building of the common stub.
153 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
155 # No user value, uncomment the following line to provide one.
157 # value_source default
159 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
160 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
163 # The following properties are affected by this value
164 # option CYGBLD_BUILD_GDB_STUBS
165 # Requires: CYGBLD_BUILD_COMMON_GDB_STUBS
169 # Common ethernet support
170 # doc: ref/io-eth-drv-generic.html
171 # Platform independent ethernet drivers
173 cdl_package CYGPKG_IO_ETH_DRIVERS {
174 # Packages cannot be added or removed, nor can their version be changed,
175 # simply by editing their value. Instead the appropriate configuration
176 # should be used to perform these actions.
178 # This value cannot be modified here.
180 # Current value: 1 current
182 # The following properties are affected by this value
183 # package CYGPKG_DEVS_ETH_SMSC_LAN91C111
184 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
185 # package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON
186 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
187 # component CYGPKG_REDBOOT_NETWORKING
188 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
192 # Driver supports multicast addressing
193 # This interface defines whether or not a driver can handle
194 # requests for multicast addressing.
196 cdl_interface CYGINT_IO_ETH_MULTICAST {
197 # No options implement this inferface
198 # This value cannot be modified here.
203 # Support printing driver debug information
204 # Selecting this option will include code to allow the driver to
205 # print lots of information on diagnostic output such as full
208 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
210 # No user value, uncomment the following line to provide one.
212 # value_source default
217 # Driver debug output verbosity
218 # The value of this option indicates the default verbosity
219 # level of debugging output. 0 means no debugging output
220 # is made by default. Higher values indicate higher verbosity.
221 # The verbosity level may also be changed at run time by
222 # changing the variable cyg_io_eth_net_debug.
224 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
226 # No user value, uncomment the following line to provide one.
228 # value_source default
233 # Size of scatter-gather I/O lists
234 # A scatter-gather list is used to pass requests to/from
235 # the physical device driver. This list can typically be
236 # small, as the data is normally already packed into reasonable
239 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
241 # No user value, uncomment the following line to provide one.
243 # value_source default
247 # Support for standard eCos TCP/IP stack.
249 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
250 # This option is not active
251 # ActiveIf constraint: CYGPKG_NET
252 # CYGPKG_NET (unknown) == 0
256 # No user value, uncomment the following line to provide one.
258 # value_source default
260 # Requires: CYGINT_ISO_STRING_STRFUNCS
261 # CYGINT_ISO_STRING_STRFUNCS == 1
266 # Warn when there are no more mbufs
267 # Warnings about running out of mbufs are printed to the
268 # diagnostic output channel via diag_printf() if this option
269 # is enabled. Mbufs are the network stack's basic dynamic
270 # memory objects that hold all packets in transit; running
271 # out is bad for performance but not fatal, not a crash.
272 # You might want to turn off the warnings to preserve realtime
273 # properties of the system even in extremis.
275 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
276 # This option is not active
277 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
280 # No user value, uncomment the following line to provide one.
282 # value_source default
286 # Simulate network failures for testing
287 # This package contains a suite of simulated failure modes
288 # for the ethernet device layer, including dropping and/or
289 # corrupting received packets, dropping packets queued for
290 # transmission, and simulating a complete network break.
291 # It requires the kernel as a source of time information.
293 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
294 # This option is not active
295 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
298 # No user value, uncomment the following line to provide one.
300 # value_source default
305 # Drop incoming packets (percentage)
307 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
308 # This option is not active
309 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
310 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
313 # No user value, uncomment the following line to provide one.
315 # value_source default
316 # Default value: 1 10
317 # Legal values: 10 50 80
320 # Corrupt incoming packets (percentage)
322 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
323 # This option is not active
324 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
325 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
328 # No user value, uncomment the following line to provide one.
330 # value_source default
331 # Default value: 1 10
332 # Legal values: 10 50 80
335 # Drop outgoing packets (percentage)
337 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
338 # This option is not active
339 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
340 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
343 # No user value, uncomment the following line to provide one.
345 # value_source default
346 # Default value: 1 10
347 # Legal values: 10 50 80
350 # Simulate a line cut from time to time
351 # This option causes the system to drop all packets for a
352 # short random period (10s of seconds), and then act
353 # normally for up to 4 times that long. This simulates your
354 # sysadmin fiddling with plugs in the network switch
357 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
358 # This option is not active
359 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
360 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
363 # No user value, uncomment the following line to provide one.
365 # value_source default
371 # Support for stand-alone network stack.
373 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
374 # ActiveIf constraint: !CYGPKG_NET
375 # CYGPKG_NET (unknown) == 0
379 # No user value, uncomment the following line to provide one.
381 # value_source default
383 # Requires: CYGINT_ISO_STRING_MEMFUNCS
384 # CYGINT_ISO_STRING_MEMFUNCS == 1
389 # Pass packets to an alternate stack
390 # Define this to allow packets seen by this layer to be
391 # passed on to the previous logical layer, i.e. when
392 # stand-alone processing replaces system (eCos) processing.
394 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
399 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
400 # CYGPKG_REDBOOT_NETWORKING == 1
404 # Number of [network] buffers
405 # This option is used to allocate space to buffer incoming network
406 # packets. These buffers are used to hold data until they can be
407 # logically processed by higher layers.
409 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
411 # No user value, uncomment the following line to provide one.
413 # value_source default
415 # Legal values: 2 to 32
418 # Show driver warnings
419 # Selecting this option will allows the stand-alone ethernet driver
420 # to display warnings on the system console when incoming network
421 # packets are being discarded due to lack of buffer space.
423 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
424 # ActiveIf constraint: CYGPKG_REDBOOT
425 # CYGPKG_REDBOOT == current
429 # No user value, uncomment the following line to provide one.
431 # value_source default
436 # Support for lwIP network stack.
438 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
439 # This option is not active
440 # ActiveIf constraint: CYGPKG_NET_LWIP
441 # CYGPKG_NET_LWIP (unknown) == 0
445 # No user value, uncomment the following line to provide one.
447 # value_source default
449 # Requires: !CYGPKG_NET
450 # CYGPKG_NET (unknown) == 0
454 # Interrupt support required
455 # This interface is used to indicate to the low
456 # level device drivers that interrupt driven operation
457 # is required by higher layers.
459 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
460 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
461 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
462 # This value cannot be modified here.
466 # The following properties are affected by this value
469 # Common ethernet support build options
471 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
472 # There is no associated value.
476 # Additional compiler flags
477 # This option modifies the set of compiler flags for
478 # building the common ethernet support package. These flags are used in addition
479 # to the set of global flags.
481 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
483 # No user value, uncomment the following line to provide one.
484 # user_value "-D_KERNEL -D__ECOS"
485 # value_source default
486 # Default value: "-D_KERNEL -D__ECOS"
490 # SMSC LAN91C111 compatible ethernet driver
491 # Ethernet driver for SMSC LAN91C111 compatible controllers.
493 cdl_package CYGPKG_DEVS_ETH_SMSC_LAN91C111 {
494 # Packages cannot be added or removed, nor can their version be changed,
495 # simply by editing their value. Instead the appropriate configuration
496 # should be used to perform these actions.
498 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
499 # CYGPKG_IO_ETH_DRIVERS == current
501 # ActiveIf constraint: CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
502 # CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED == 1
505 # This value cannot be modified here.
507 # Current value: 1 current
509 # The following properties are affected by this value
510 # package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON
511 # Requires: CYGPKG_DEVS_ETH_SMSC_LAN91C111
515 # use 32 bit data access
516 # The device driver uses 32 bit data access if
517 # this option is enabled, otherwise 16 bit data access is
520 cdl_option CYGSEM_DEVS_ETH_SMSC_LAN91C111_USE_32BIT {
527 # SIOCSIFHWADDR records ESA (MAC address) in EEPROM
528 # The ioctl() socket call with operand SIOCSIFHWADDR sets the
529 # interface hardware address - the MAC address or Ethernet Station
530 # Address (ESA). This option causes the new MAC address to be written
531 # into the EEPROM associated with the interface, so that the new
532 # MAC address is permanently recorded. Doing this should be a
533 # carefully chosen decision, hence this option.
535 cdl_option CYGSEM_DEVS_ETH_SMSC_LAN91C111_WRITE_EEPROM {
537 # No user value, uncomment the following line to provide one.
539 # value_source default
543 # ESA is statically configured
544 # If this is nonzero, then the ESA (MAC address) is statically
545 # configured in the platform-specific package which instantiates
546 # this driver with all its details.
548 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_STATIC_ESA {
549 # Implemented by CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON, active, enabled
550 # This value cannot be modified here.
554 # The following properties are affected by this value
557 # LAN91C111 ethernet driver build options
559 cdl_component CYGPKG_DEVS_ETH_SMSC_LAN91C111_OPTIONS {
560 # There is no associated value.
564 # Additional compiler flags
565 # This option modifies the set of compiler flags for
566 # building the LAN91C111 ethernet driver package.
567 # These flags are used in addition
568 # to the set of global flags.
570 cdl_option CYGPKG_DEVS_ETH_SMSC_LAN91C111_CFLAGS_ADD {
572 # No user value, uncomment the following line to provide one.
573 # user_value "-O2 -D_KERNEL -D__ECOS"
574 # value_source default
575 # Default value: "-O2 -D_KERNEL -D__ECOS"
580 # TRITON SMC91C111 ethernet driver
581 # Ethernet driver for TRITON boards.
583 cdl_package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON {
584 # Packages cannot be added or removed, nor can their version be changed,
585 # simply by editing their value. Instead the appropriate configuration
586 # should be used to perform these actions.
588 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
589 # CYGPKG_IO_ETH_DRIVERS == current
592 # This value cannot be modified here.
594 # Current value: 1 current
595 # Requires: CYGPKG_DEVS_ETH_SMSC_LAN91C111
596 # CYGPKG_DEVS_ETH_SMSC_LAN91C111 == current
601 # SMSC LAN91C111 driver required
603 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED {
604 # Implemented by CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON, active, enabled
605 # This value cannot be modified here.
609 # The following properties are affected by this value
610 # package CYGPKG_DEVS_ETH_SMSC_LAN91C111
611 # ActiveIf: CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
614 # Device name for the ethernet driver
615 # This option sets the name of the ethernet device for the
618 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_NAME {
620 # No user value, uncomment the following line to provide one.
621 # user_value "\"eth0\""
622 # value_source default
623 # Default value: "\"eth0\""
626 # The ethernet station address (MAC)
627 # A static ethernet station address.
628 # Caution: Booting two systems with the same MAC on the same
629 # network, will cause severe conflicts.
631 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA {
632 # ActiveIf constraint: !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
633 # CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA == 0
637 # No user value, uncomment the following line to provide one.
638 # user_value "{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"
639 # value_source default
640 # Default value: "{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"
643 # Use the 1-WIRE device ESA (MAC address)
644 # Use the ESA that is stored in the 1wire device instead of
647 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_1WIRE_ESA {
654 # Use the RedBoot ESA (MAC address)
655 # Use the ESA that is stored as a RedBoot variable instead of
658 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA {
664 # The following properties are affected by this value
665 # option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA
666 # ActiveIf: !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
671 # ISO C library string functions
673 # This package provides string functions specified by the
674 # ISO C standard - ISO/IEC 9899:1990.
676 cdl_package CYGPKG_LIBC_STRING {
677 # Packages cannot be added or removed, nor can their version be changed,
678 # simply by editing their value. Instead the appropriate configuration
679 # should be used to perform these actions.
681 # This value cannot be modified here.
683 # Current value: 1 current
684 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
685 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
687 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
688 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
690 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
691 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
693 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
694 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
696 # Requires: CYGPKG_ISOINFRA
697 # CYGPKG_ISOINFRA == current
702 # Inline versions of <string.h> functions
703 # This option chooses whether some of the
704 # particularly simple string functions from
705 # <string.h> are available as inline
706 # functions. This may improve performance, and as
707 # the functions are small, may even improve code
710 cdl_option CYGIMP_LIBC_STRING_INLINES {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
718 # Optimize string functions for code size
719 # This option tries to reduce string function
720 # code size at the expense of execution speed. The
721 # same effect can be produced if the code is
722 # compiled with the -Os option to the compiler.
724 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
726 # No user value, uncomment the following line to provide one.
728 # value_source default
732 # Provide BSD compatibility functions
733 # Enabling this option causes various compatibility functions
734 # commonly found in the BSD UNIX operating system to be included.
735 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
736 # strncasecmp, index, rindex and swab.
738 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
740 # No user value, uncomment the following line to provide one.
742 # The inferred value should not be edited directly.
744 # value_source inferred
746 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
747 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
749 # Requires: CYGINT_ISO_CTYPE
750 # CYGINT_ISO_CTYPE == 0
755 # These options control the behaviour of the
756 # strtok() and strtok_r() string tokenization
759 cdl_component CYGPKG_LIBC_STRING_STRTOK {
760 # There is no associated value.
764 # Per-thread strtok()
765 # This option controls whether the string function
766 # strtok() has its state recorded on a per-thread
767 # basis rather than global. If this option is
768 # disabled, some per-thread space can be saved.
769 # Note there is also a POSIX-standard strtok_r()
770 # function to achieve a similar effect with user
771 # support. Enabling this option will use one slot
772 # of kernel per-thread data. You should ensure you
773 # have enough slots configured for all your
776 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
777 # This option is not active
778 # ActiveIf constraint: CYGPKG_KERNEL
779 # CYGPKG_KERNEL (unknown) == 0
783 # No user value, uncomment the following line to provide one.
785 # value_source default
786 # Default value: CYGVAR_KERNEL_THREADS_DATA
787 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
789 # Requires: CYGVAR_KERNEL_THREADS_DATA
790 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
795 # Trace verbosity level for debugging the <string.h>
796 # functions strtok() and strtok_r(). Increase this
797 # value to get additional trace output.
799 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
801 # No user value, uncomment the following line to provide one.
803 # value_source default
805 # Legal values: 0 to 1
809 # C library string functions build options
810 # Package specific build options including control over
811 # compiler flags used only in building this package,
812 # and details of which tests are built.
814 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
815 # There is no associated value.
819 # Additional compiler flags
820 # This option modifies the set of compiler flags for
821 # building the C library. These flags are used in addition
822 # to the set of global flags.
824 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
826 # No user value, uncomment the following line to provide one.
828 # value_source default
832 # Suppressed compiler flags
833 # This option modifies the set of compiler flags for
834 # building the C library. These flags are removed from
835 # the set of global flags if present.
837 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
839 # No user value, uncomment the following line to provide one.
841 # value_source default
845 # C library string function tests
846 # This option specifies the set of tests for the C library
849 cdl_option CYGPKG_LIBC_STRING_TESTS {
850 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
852 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
858 # FLASH device drivers
859 # This option enables drivers for basic I/O services on
862 cdl_package CYGPKG_IO_FLASH {
863 # Packages cannot be added or removed, nor can their version be changed,
864 # simply by editing their value. Instead the appropriate configuration
865 # should be used to perform these actions.
867 # This value cannot be modified here.
869 # Current value: 1 current
870 # Requires: CYGPKG_ISOINFRA
871 # CYGPKG_ISOINFRA == current
873 # Requires: CYGINT_ISO_STRING_STRFUNCS
874 # CYGINT_ISO_STRING_STRFUNCS == 1
877 # The following properties are affected by this value
878 # package CYGPKG_DEVS_FLASH_STRATA
879 # ActiveIf: CYGPKG_IO_FLASH
880 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
881 # ActiveIf: CYGPKG_IO_FLASH
885 # Extra memory required by FLASH device drivers
886 # Use this option to control how much extra memory is used
887 # by the FLASH drivers to perform certain operations. This
888 # memory is used to hold driver functions in RAM (for platforms
889 # which require it). The value should thus be large enough
890 # to hold any such driver. Reducing this value will make
891 # more RAM available to general programs.
893 cdl_option CYGNUM_FLASH_WORKSPACE_SIZE {
895 # No user value, uncomment the following line to provide one.
896 # user_value 0x00001000
897 # value_source default
898 # Default value: 0x00001000
901 # Hardware FLASH device drivers
902 # This option enables the hardware device drivers
903 # for the current platform.
905 cdl_interface CYGHWR_IO_FLASH_DEVICE {
906 # Implemented by CYGPKG_DEVS_FLASH_STRATA, active, enabled
907 # This value cannot be modified here.
911 # The following properties are affected by this value
912 # component CYGPKG_REDBOOT_FLASH
913 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
916 # Hardware FLASH device drivers are not in RAM
917 # This option makes the IO driver copy the device
918 # driver functions to RAM before calling them. Newer
919 # drivers should make sure that the functions are
920 # linked to RAM by putting them in .2ram sections.
922 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
923 # Implemented by CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM, active, enabled
924 # This value cannot be modified here.
928 # The following properties are affected by this value
931 # Hardware can support block locking
932 # This option will be enabled by devices which can support
933 # locking (write-protection) of individual blocks.
935 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
936 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
937 # This value cannot be modified here.
941 # The following properties are affected by this value
942 # component CYGPKG_DEVS_FLASH_STRATA_LOCKING
943 # ActiveIf: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
944 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
945 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
948 # Verify data programmed to flash
949 # Selecting this option will cause verification of data
950 # programmed to flash.
952 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
954 # No user value, uncomment the following line to provide one.
956 # value_source default
960 # Platform has flash soft DIP switch write-protect
961 # Selecting this option will cause the state of a hardware jumper or
962 # dipswitch to be read by software to determine whether the flash is
963 # write-protected or not.
965 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
967 # No user value, uncomment the following line to provide one.
969 # value_source default
973 # Instantiate in I/O block device API
974 # Provides a block device accessible using the standard I/O
975 # API ( cyg_io_read() etc. )
977 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
978 # This option is not active
979 # ActiveIf constraint: CYGPKG_IO
980 # CYGPKG_IO (unknown) == 0
984 # No user value, uncomment the following line to provide one.
986 # value_source default
991 # Name of flash device 1 block device
993 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
994 # This option is not active
995 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
996 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
999 # No user value, uncomment the following line to provide one.
1000 # user_value "\"/dev/flash1\""
1001 # value_source default
1002 # Default value: "\"/dev/flash1\""
1006 # Start offset from flash base
1007 # This gives the offset from the base of flash which this
1008 # block device corresponds to.
1010 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
1011 # This option is not active
1012 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
1015 # No user value, uncomment the following line to provide one.
1016 # user_value 0x00100000
1017 # value_source default
1018 # Default value: 0x00100000
1022 # This gives the length of the region of flash given over
1023 # to this block device.
1025 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
1026 # This option is not active
1027 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
1030 # No user value, uncomment the following line to provide one.
1031 # user_value 0x00100000
1032 # value_source default
1033 # Default value: 0x00100000
1038 # Intel StrataFLASH memory support
1039 # FLASH memory device support for Intel StrataFlash
1041 cdl_package CYGPKG_DEVS_FLASH_STRATA {
1042 # Packages cannot be added or removed, nor can their version be changed,
1043 # simply by editing their value. Instead the appropriate configuration
1044 # should be used to perform these actions.
1046 # ActiveIf constraint: CYGPKG_IO_FLASH
1047 # CYGPKG_IO_FLASH == current
1049 # ActiveIf constraint: CYGINT_DEVS_FLASH_STRATA_REQUIRED
1050 # CYGINT_DEVS_FLASH_STRATA_REQUIRED == 1
1053 # This value cannot be modified here.
1055 # Current value: 1 current
1057 # The following properties are affected by this value
1058 # package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON
1059 # Requires: CYGPKG_DEVS_FLASH_STRATA
1063 # Control Flash driver code copy to RAM
1064 # Rarely, it is useful to disable the request that flash driver code
1065 # be copied to separate RAM for execution. This option lets you do that.
1066 # It should only be controlled by redboot_XXX.ecm config files, for
1067 # building different varieties of RedBoot.
1068 # NEVER disable this option for ROM startup code, which executes in place
1069 # from Flash: the build will not work.
1071 cdl_option CYGOPT_DEVS_FLASH_STRATA_NOT_IN_RAM {
1073 # No user value, uncomment the following line to provide one.
1075 # value_source default
1079 # Flash device implements locking
1081 cdl_component CYGPKG_DEVS_FLASH_STRATA_LOCKING {
1082 # ActiveIf constraint: 0 < CYGHWR_IO_FLASH_BLOCK_LOCKING
1083 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
1086 # Calculated value: 1
1092 # TRITON FLASH memory support
1094 cdl_package CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON {
1095 # Packages cannot be added or removed, nor can their version be changed,
1096 # simply by editing their value. Instead the appropriate configuration
1097 # should be used to perform these actions.
1099 # ActiveIf constraint: CYGPKG_IO_FLASH
1100 # CYGPKG_IO_FLASH == current
1103 # This value cannot be modified here.
1105 # Current value: 1 current
1106 # Requires: CYGPKG_DEVS_FLASH_STRATA
1107 # CYGPKG_DEVS_FLASH_STRATA == current
1112 # Generic StrataFLASH driver required
1114 cdl_interface CYGINT_DEVS_FLASH_STRATA_REQUIRED {
1115 # Implemented by CYGPKG_DEVS_FLASH_ARM_XSCALE_TRITON, active, enabled
1116 # This value cannot be modified here.
1120 # The following properties are affected by this value
1121 # package CYGPKG_DEVS_FLASH_STRATA
1122 # ActiveIf: CYGINT_DEVS_FLASH_STRATA_REQUIRED
1128 # doc: ref/the-ecos-hardware-abstraction-layer.html
1129 # The eCos HAL package provide a porting layer for
1130 # higher-level parts of the system such as the kernel and the
1131 # C library. Each installation should have HAL packages for
1132 # one or more architectures, and for each architecture there
1133 # may be one or more supported platforms. It is necessary to
1134 # select one target architecture and one platform for that
1135 # architecture. There are also a number of configuration
1136 # options that are common to all HAL packages.
1138 cdl_package CYGPKG_HAL {
1139 # Packages cannot be added or removed, nor can their version be changed,
1140 # simply by editing their value. Instead the appropriate configuration
1141 # should be used to perform these actions.
1143 # This value cannot be modified here.
1145 # Current value: 1 current
1146 # Requires: CYGPKG_INFRA
1147 # CYGPKG_INFRA == current
1150 # The following properties are affected by this value
1154 # Platform-independent HAL options
1155 # A number of configuration options are common to most or all
1156 # HAL packages, for example options controlling how much state
1157 # should be saved during a context switch. The implementations
1158 # of these options will vary from architecture to architecture.
1160 cdl_component CYGPKG_HAL_COMMON {
1161 # There is no associated value.
1165 # Provide eCos kernel support
1166 # The HAL can be configured to either support the full eCos
1167 # kernel, or to support only very simple applications which do
1168 # not require a full kernel. If kernel support is not required
1169 # then some of the startup, exception, and interrupt handling
1170 # code can be eliminated.
1172 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1174 # No user value, uncomment the following line to provide one.
1176 # value_source default
1177 # Default value: CYGPKG_KERNEL
1178 # CYGPKG_KERNEL (unknown) == 0
1180 # Requires: CYGPKG_KERNEL
1181 # CYGPKG_KERNEL (unknown) == 0
1185 # HAL exception support
1186 # When a processor exception occurs, for example an attempt to
1187 # execute an illegal instruction or to perform a divide by
1188 # zero, this exception may be handled in a number of different
1189 # ways. If the target system has gdb support then typically
1190 # the exception will be handled by gdb code. Otherwise if the
1191 # HAL exception support is enabled then the HAL will invoke a
1192 # routine deliver_exception(). Typically this routine will be
1193 # provided by the eCos kernel, but it is possible for
1194 # application code to provide its own implementation. If the
1195 # HAL exception support is not enabled and a processor
1196 # exception occurs then the behaviour of the system is
1199 cdl_option CYGPKG_HAL_EXCEPTIONS {
1201 # No user value, uncomment the following line to provide one.
1203 # value_source default
1204 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1205 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1207 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1208 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1212 # Stop calling constructors early
1213 # This option supports environments where some constructors
1214 # must be run in the context of a thread rather than at
1215 # simple system startup time. A boolean flag named
1216 # cyg_hal_stop_constructors is set to 1 when constructors
1217 # should no longer be invoked. It is up to some other
1218 # package to deal with the rest of the constructors.
1219 # In the current version this is only possible with the
1222 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1224 # No user value, uncomment the following line to provide one.
1226 # value_source default
1228 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1229 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1233 # HAL uses the MMU and allows for CDL manipulation of it's use
1235 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1236 # No options implement this inferface
1237 # This value cannot be modified here.
1241 # The following properties are affected by this value
1242 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1243 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1246 # Install MMU tables.
1247 # This option controls whether this application installs
1248 # its own Memory Management Unit (MMU) tables, or relies on the
1249 # existing environment to run.
1251 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1252 # This option is not active
1253 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1254 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1258 # No user value, uncomment the following line to provide one.
1260 # value_source default
1261 # Default value: CYG_HAL_STARTUP != "RAM"
1262 # CYG_HAL_STARTUP == ROM
1265 # The following properties are affected by this value
1266 # option CYGSEM_HAL_STATIC_MMU_TABLES
1267 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1270 # Use static MMU tables.
1271 # This option defines an environment where any Memory
1272 # Management Unit (MMU) tables are constant. Normally used by ROM
1273 # based environments, this provides a way to save RAM usage which
1274 # would otherwise be required for these tables.
1276 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1278 # No user value, uncomment the following line to provide one.
1280 # value_source default
1282 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1283 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1287 # Route diagnostic output to debug channel
1288 # If not inheriting the console setup from the ROM monitor,
1289 # it is possible to redirect diagnostic output to the debug
1290 # channel by enabling this option. Depending on the debugger
1291 # used it may also be necessary to select a mangler for the
1292 # output to be displayed by the debugger.
1294 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1295 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1296 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1298 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1299 # CYGPKG_HAL_ARM == current
1300 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1301 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1302 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1308 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1309 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1310 # CYG_HAL_STARTUP == ROM
1313 # The following properties are affected by this value
1314 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1315 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1319 # Mangler used on diag output
1320 # It is sometimes necessary to mangle (encode) the
1321 # diag ASCII text output in order for it to show up at the
1322 # other end. In particular, GDB may silently ignore raw
1325 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1326 # This option is not active
1327 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1330 # No user value, uncomment the following line to provide one.
1332 # value_source default
1333 # Default value: GDB
1334 # Legal values: "GDB" "None"
1339 # HAL interrupt handling
1340 # A number of configuration options related to interrupt
1341 # handling are common to most or all HAL packages, even though
1342 # the implementations will vary from architecture to
1345 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1346 # There is no associated value.
1350 # Use separate stack for interrupts
1351 # When an interrupt occurs this interrupt can be handled either
1352 # on the current stack or on a separate stack maintained by the
1353 # HAL. Using a separate stack requires a small number of extra
1354 # instructions in the interrupt handling code, but it has the
1355 # advantage that it is no longer necessary to allow extra space
1356 # in every thread stack for the interrupt handlers. The amount
1357 # of extra space required depends on the interrupt handlers
1358 # that are being used.
1360 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1362 # No user value, uncomment the following line to provide one.
1364 # value_source default
1368 # Interrupt stack size
1369 # This configuration option specifies the stack size in bytes
1370 # for the interrupt stack. Typically this should be a multiple
1371 # of 16, but the exact requirements will vary from architecture
1372 # to architecture. The interrupt stack serves two separate
1373 # purposes. It is used as the stack during system
1374 # initialization. In addition, if the interrupt system is
1375 # configured to use a separate stack then all interrupts will
1376 # be processed on this stack. The exact memory requirements
1377 # will vary from application to application, and will depend
1378 # heavily on whether or not other interrupt-related options,
1379 # for example nested interrupts, are enabled. On most targets,
1380 # in a configuration with no kernel this stack will also be
1381 # the stack used to invoke the application, and must obviously
1382 # be appropriately large in that case.
1384 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1388 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1389 # CYGPKG_KERNEL (unknown) == 0
1391 # Legal values: 1024 to 1048576
1394 # Allow nested interrupts
1395 # When an interrupt occurs the HAL interrupt handling code can
1396 # either leave interrupts disabled for the duration of the
1397 # interrupt handling code, or by doing some extra work it can
1398 # reenable interrupts before invoking the interrupt handler and
1399 # thus allow nested interrupts to happen. If all the interrupt
1400 # handlers being used are small and do not involve any loops
1401 # then it is usually better to disallow nested interrupts.
1402 # However if any of the interrupt handlers are more complicated
1403 # than nested interrupts will usually be required.
1405 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1407 # No user value, uncomment the following line to provide one.
1409 # value_source default
1413 # Save minimum context on interrupt
1414 # The HAL interrupt handling code can exploit the calling conventions
1415 # defined for a given architecture to reduce the amount of state
1416 # that has to be saved. Generally this improves performance and
1417 # reduces code size. However it can make source-level debugging
1420 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1426 # The following properties are affected by this value
1427 # option CYGBLD_BUILD_GDB_STUBS
1428 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1429 # component CYGBLD_BUILD_REDBOOT
1430 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1433 # Chain all interrupts together
1434 # Interrupts can be attached to vectors either singly, or be
1435 # chained together. The latter is necessary if there is no way
1436 # of discovering which device has interrupted without
1437 # inspecting the device itself. It can also reduce the amount
1438 # of RAM needed for interrupt decoding tables and code.
1440 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1442 # No user value, uncomment the following line to provide one.
1444 # value_source default
1448 # Ignore spurious [fleeting] interrupts
1449 # On some hardware, interrupt sources may not be de-bounced or
1450 # de-glitched. Rather than try to handle these interrupts (no
1451 # handling may be possible), this option allows the HAL to simply
1452 # ignore them. In most cases, if the interrupt is real it will
1453 # reoccur in a detectable form.
1455 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1457 # No user value, uncomment the following line to provide one.
1459 # value_source default
1464 # HAL context switch support
1465 # A number of configuration options related to thread contexts
1466 # are common to most or all HAL packages, even though the
1467 # implementations will vary from architecture to architecture.
1469 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1470 # There is no associated value.
1472 # The following properties are affected by this value
1476 # Use minimum thread context
1477 # The thread context switch code can exploit the calling
1478 # conventions defined for a given architecture to reduce the
1479 # amount of state that has to be saved during a context
1480 # switch. Generally this improves performance and reduces
1481 # code size. However it can make source-level debugging more
1484 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1486 # No user value, uncomment the following line to provide one.
1488 # The inferred value should not be edited directly.
1490 # value_source inferred
1493 # The following properties are affected by this value
1494 # option CYGBLD_BUILD_GDB_STUBS
1495 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1496 # component CYGBLD_BUILD_REDBOOT
1497 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1501 # Explicit control over cache behaviour
1502 # These options let the default behaviour of the caches
1503 # be easily configurable.
1505 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1506 # There is no associated value.
1510 # Enable DATA cache on startup
1511 # Enabling this option will cause the data cache to be enabled
1512 # as soon as practicable when eCos starts up. One would choose
1513 # to disable this if the data cache cannot safely be turned on,
1514 # such as a case where the cache(s) require additional platform
1517 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1519 # No user value, uncomment the following line to provide one.
1521 # value_source default
1526 # DATA cache mode on startup
1527 # This option controls the mode the cache will be set to
1528 # when enabled on startup.
1530 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1532 # No user value, uncomment the following line to provide one.
1533 # user_value COPYBACK
1534 # value_source default
1535 # Default value: COPYBACK
1536 # Legal values: "COPYBACK" "WRITETHRU"
1540 # Enable INSTRUCTION cache on startup
1541 # Enabling this option will cause the instruction cache to be enabled
1542 # as soon as practicable when eCos starts up. One would choose
1543 # to disable this if the instruction cache cannot safely be turned on,
1544 # such as a case where the cache(s) require additional platform
1547 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1549 # No user value, uncomment the following line to provide one.
1551 # value_source default
1556 # Source-level debugging support
1557 # If the source level debugger gdb is to be used for debugging
1558 # application code then it may be necessary to configure in support
1559 # for this in the HAL.
1561 cdl_component CYGPKG_HAL_DEBUG {
1562 # There is no associated value.
1566 # Support for GDB stubs
1567 # The HAL implements GDB stubs for the target.
1569 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1570 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
1571 # This value cannot be modified here.
1575 # The following properties are affected by this value
1576 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1577 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1578 # component CYGBLD_BUILD_REDBOOT
1579 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1580 # component CYGBLD_BUILD_REDBOOT
1581 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1584 # Include GDB stubs in HAL
1585 # This option causes a set of GDB stubs to be included into the
1586 # system. On some target systems the GDB support will be
1587 # provided by other means, for example by a ROM monitor. On
1588 # other targets, especially when building a ROM-booting system,
1589 # the necessary support has to go into the target library
1590 # itself. When GDB stubs are include in a configuration, HAL
1591 # serial drivers must also be included.
1593 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1594 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1595 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1599 # No user value, uncomment the following line to provide one.
1601 # The inferred value should not be edited directly.
1603 # value_source inferred
1605 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1606 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1608 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1609 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1610 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1613 # The following properties are affected by this value
1614 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1615 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1616 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1617 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1618 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1619 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1620 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1621 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1622 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1623 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1624 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1625 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1626 # option CYGBLD_BUILD_COMMON_GDB_STUBS
1627 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1628 # option CYGPKG_HAL_GDB_FILEIO
1629 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1630 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
1631 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1632 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1633 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1634 # option CYGBLD_BUILD_GDB_STUBS
1635 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1636 # component CYGBLD_BUILD_REDBOOT
1637 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1640 # Support for external break support in GDB stubs
1641 # The HAL implements external break (or asynchronous interrupt)
1642 # in the GDB stubs for the target.
1644 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
1645 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
1646 # This value cannot be modified here.
1650 # The following properties are affected by this value
1651 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1652 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1655 # Include GDB external break support for stubs
1656 # This option causes the GDB stub to add a serial interrupt handler
1657 # which will listen for GDB break packets. This lets you stop the
1658 # target asynchronously when using GDB, usually by hitting Control+C
1659 # or pressing the STOP button. This option differs from
1660 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
1661 # GDB stubs are present.
1663 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
1664 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
1665 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
1669 # No user value, uncomment the following line to provide one.
1671 # value_source default
1672 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1673 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1675 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1676 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1679 # The following properties are affected by this value
1680 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1681 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1682 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1683 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1684 # option CYGBLD_BUILD_GDB_STUBS
1685 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1686 # component CYGBLD_BUILD_REDBOOT
1687 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1690 # Platform does not support CTRLC
1692 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
1693 # No options implement this inferface
1694 # This value cannot be modified here.
1698 # The following properties are affected by this value
1699 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1700 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1703 # Include GDB external break support when no stubs
1704 # This option adds an interrupt handler for the GDB serial line
1705 # which will listen for GDB break packets. This lets you stop the
1706 # target asynchronously when using GDB, usually by hitting Control+C
1707 # or pressing the STOP button. This option differs from
1708 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
1709 # stubs are NOT present.
1711 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
1712 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1713 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1714 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1716 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1717 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
1721 # No user value, uncomment the following line to provide one.
1723 # value_source default
1724 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1725 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
1727 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1728 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
1731 # The following properties are affected by this value
1732 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
1733 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
1734 # component CYGBLD_BUILD_REDBOOT
1735 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
1738 # Include GDB multi-threading debug support
1739 # This option enables some extra HAL code which is needed
1740 # to support multi-threaded source level debugging.
1742 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
1743 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
1744 # CYGSEM_HAL_ROM_MONITOR == 1
1745 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
1749 # No user value, uncomment the following line to provide one.
1751 # value_source default
1754 # The following properties are affected by this value
1755 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
1756 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1757 # option CYGBLD_BUILD_GDB_STUBS
1758 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1759 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
1760 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
1763 # Number of times to retry sending a $O packet
1764 # This option controls the number of attempts that eCos programs
1765 # will make to send a $O packet to a host GDB process. If it is
1766 # set non-zero, then the target process will attempt to resend the
1767 # $O packet data up to this number of retries. Caution: use of
1768 # this option is not recommended as it can thoroughly confuse the
1771 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
1773 # No user value, uncomment the following line to provide one.
1775 # value_source default
1779 # Timeout period for GDB packets
1780 # This option controls the time (in milliseconds) that eCos programs
1781 # will wait for a response when sending packets to a host GDB process.
1782 # If this time elapses, then the packet will be resent, up to some
1783 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
1785 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
1787 # No user value, uncomment the following line to provide one.
1789 # value_source default
1790 # Default value: 500
1794 # ROM monitor support
1795 # Support for ROM monitors can be built in to your application.
1796 # It may also be relevant to build your application as a ROM monitor
1797 # itself. Such options are contained here if relevant for your chosen
1798 # platform. The options and ROM monitors available to choose are
1799 # platform-dependent.
1801 cdl_component CYGPKG_HAL_ROM_MONITOR {
1802 # There is no associated value.
1804 # The following properties are affected by this value
1808 # Target has virtual vector support
1810 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
1811 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
1812 # This value cannot be modified here.
1816 # The following properties are affected by this value
1817 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1818 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1821 # Target supports baud rate control via vectors
1822 # Whether this target supports the __COMMCTL_GETBAUD
1823 # and __COMMCTL_SETBAUD virtual vector comm control operations.
1825 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
1826 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
1827 # This value cannot be modified here.
1831 # The following properties are affected by this value
1832 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
1833 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
1836 # Enable use of virtual vector calling interface
1837 # Virtual vector support allows the HAL to let the ROM
1838 # monitor handle certain operations. The virtual vector table
1839 # defines a calling interface between applications running in
1840 # RAM and the ROM monitor.
1842 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
1843 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
1844 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
1847 # Calculated value: 1
1851 # The following properties are affected by this value
1852 # component CYGBLD_BUILD_REDBOOT
1853 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
1857 # Inherit console settings from ROM monitor
1858 # When this option is set, the application will inherit
1859 # the console as set up by the ROM monitor. This means
1860 # that the application will use whatever channel and
1861 # mangling style was used by the ROM monitor when
1862 # the application was launched.
1864 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
1865 # This option is not active
1866 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
1867 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1871 # No user value, uncomment the following line to provide one.
1873 # value_source default
1874 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1875 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1878 # The following properties are affected by this value
1879 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1880 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1881 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1882 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1885 # Debug channel is configurable
1886 # This option is a configuration hint - it is enabled
1887 # when the HAL initialization code will make use
1888 # of the debug channel configuration option.
1890 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
1891 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1892 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1897 # Console channel is configurable
1898 # This option is a configuration hint - it is enabled
1899 # when the HAL initialization code will make use
1900 # of the console channel configuration option.
1902 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
1903 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1904 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1905 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
1910 # Initialize whole of virtual vector table
1911 # This option will cause the whole of the virtual
1912 # vector table to be initialized with dummy values on
1913 # startup. When this option is enabled, all the
1914 # options below must also be enabled - or the
1915 # table would be empty when the application
1917 # On targets where older ROM monitors without
1918 # virtual vector support may still be in use, it is
1919 # necessary for RAM applictions to initialize the
1920 # table (since all HAL diagnostics and debug IO
1921 # happens via the table).
1923 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
1927 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
1928 # CYG_HAL_STARTUP == ROM
1929 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1931 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1932 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
1934 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1935 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
1937 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1938 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
1940 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1941 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
1943 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1944 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1947 # The following properties are affected by this value
1948 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1949 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1950 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
1951 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1952 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
1953 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1954 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
1955 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1956 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
1957 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1958 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
1959 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
1960 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1961 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1964 # Claim virtual vector table entries by default
1965 # By default most virtual vectors will be claimed by
1966 # RAM startup configurations, meaning that the RAM
1967 # application will provide the services. The
1968 # exception is COMMS support (HAL
1969 # diagnostics/debugging IO) which is left in the
1970 # control of the ROM monitor.
1971 # The reasoning behind this is to get as much of the
1972 # code exercised during regular development so it
1973 # is known to be working the few times a new ROM
1974 # monitor or a ROM production configuration is used
1975 # - COMMS are excluded only by necessity in order to
1976 # avoid breaking an existing debugger connections
1977 # (there may be ways around this).
1978 # For production RAM configurations this option can
1979 # be switched off, causing the appliction to rely on
1980 # the ROM monitor for these services, thus
1981 # saving some space.
1982 # Individual vectors may also be left unclaimed,
1983 # controlled by the below options (meaning that the
1984 # associated service provided by the ROM monitor
1987 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
1988 # This option is not active
1989 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
1990 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
1994 # No user value, uncomment the following line to provide one.
1996 # value_source default
1999 # The following properties are affected by this value
2000 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2001 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2002 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2003 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2004 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2005 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2006 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2007 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2010 # Claim reset virtual vectors
2011 # This option will cause the reset and kill_by_reset
2012 # virtual vectors to be claimed.
2014 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2018 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2019 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2020 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2023 # The following properties are affected by this value
2024 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2025 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2028 # Claim version virtual vectors
2029 # This option will cause the version
2030 # virtual vectors to be claimed.
2032 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2036 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2037 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2041 # Claim delay_us virtual vector
2042 # This option will cause the delay_us
2043 # virtual vector to be claimed.
2045 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2049 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2050 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2051 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2054 # The following properties are affected by this value
2055 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2056 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2059 # Claim cache virtual vectors
2060 # This option will cause the cache virtual vectors
2063 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2067 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2068 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2069 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2072 # The following properties are affected by this value
2073 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2074 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2077 # Claim data virtual vectors
2078 # This option will cause the data virtual vectors
2079 # to be claimed. At present there is only one, used
2080 # by the RedBoot ethernet driver to share diag output.
2082 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2086 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2087 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2088 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2091 # The following properties are affected by this value
2092 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2093 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2096 # Claim comms virtual vectors
2097 # This option will cause the communication tables
2098 # that are part of the virtual vectors mechanism to
2099 # be claimed. Note that doing this may cause an
2100 # existing ROM monitor communication connection to
2101 # be closed. For this reason, the option is disabled
2102 # per default for normal application
2105 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2109 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2110 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2111 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2114 # The following properties are affected by this value
2115 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2116 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2117 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2118 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2119 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2120 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2121 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2122 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2125 # Do diagnostic IO via virtual vector table
2126 # All HAL IO happens via the virtual vector table / comm
2127 # tables when those tables are supported by the HAL.
2128 # If so desired, the low-level IO functions can
2129 # still be provided by the RAM application by
2130 # enabling the CLAIM_COMMS option.
2132 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2133 # Calculated value: 1
2137 # The following properties are affected by this value
2138 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2139 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2140 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2141 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2145 # Behave as a ROM monitor
2146 # Enable this option if this program is to be used as a ROM monitor,
2147 # i.e. applications will be loaded into RAM on the board, and this
2148 # ROM monitor may process exceptions or interrupts generated from the
2149 # application. This enables features such as utilizing a separate
2150 # interrupt stack when exceptions are generated.
2152 cdl_option CYGSEM_HAL_ROM_MONITOR {
2157 # Requires: CYG_HAL_STARTUP == "ROM"
2158 # CYG_HAL_STARTUP == ROM
2161 # The following properties are affected by this value
2162 # option CYGBLD_BUILD_GDB_STUBS
2163 # Requires: CYGSEM_HAL_ROM_MONITOR
2164 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2165 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2166 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2167 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2168 # option CYGPRI_REDBOOT_ROM_MONITOR
2169 # Requires: CYGSEM_HAL_ROM_MONITOR
2172 # Work with a ROM monitor
2173 # Support can be enabled for different varieties of ROM monitor.
2174 # This support changes various eCos semantics such as the encoding
2175 # of diagnostic output, or the overriding of hardware interrupt
2177 # Firstly there is "Generic" support which prevents the HAL
2178 # from overriding the hardware vectors that it does not use, to
2179 # instead allow an installed ROM monitor to handle them. This is
2180 # the most basic support which is likely to be common to most
2181 # implementations of ROM monitor.
2182 # "GDB_stubs" provides support when GDB stubs are included in
2183 # the ROM monitor or boot ROM.
2185 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2189 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2190 # CYG_HAL_STARTUP == ROM
2192 # Legal values: "Generic" "GDB_stubs"
2193 # Requires: CYG_HAL_STARTUP == "RAM"
2194 # CYG_HAL_STARTUP == ROM
2197 # The following properties are affected by this value
2198 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2199 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2200 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2201 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2202 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2203 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2204 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2205 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2209 # Platform defined I/O channels.
2210 # Platforms which provide additional I/O channels can implement
2211 # this interface, indicating that the function plf_if_init()
2212 # needs to be called.
2214 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2215 # No options implement this inferface
2216 # This value cannot be modified here.
2221 # Platform IDE I/O support.
2222 # Platforms which provide IDE controllers can implement
2223 # this interface, indicating that IDE I/O macros are
2226 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2227 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
2228 # This value cannot be modified here.
2232 # The following properties are affected by this value
2233 # component CYGPKG_REDBOOT_DISK
2234 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2237 # File I/O operations via GDB
2238 # This option enables support for various file I/O
2239 # operations using the GDB remote protocol to communicate
2240 # with GDB. The operations are then performed on the
2241 # debugging host by proxy. These operations are only
2242 # currently available by using a system call interface
2243 # to RedBoot. This may change in the future.
2245 cdl_option CYGPKG_HAL_GDB_FILEIO {
2246 # This option is not active
2247 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2248 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2252 # No user value, uncomment the following line to provide one.
2254 # value_source default
2256 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2257 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2261 # Build Compiler sanity checking tests
2262 # Enabling this option causes compiler tests to be built.
2264 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2266 # No user value, uncomment the following line to provide one.
2268 # value_source default
2271 # The following properties are affected by this value
2272 # component CYGPKG_HAL_TESTS
2273 # Calculated: "tests/context tests/basic"
2274 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2275 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2276 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2280 # This option specifies the set of tests for the common HAL.
2282 cdl_component CYGPKG_HAL_TESTS {
2283 # Calculated value: "tests/context tests/basic"
2284 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2285 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2286 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2287 # CYGINT_HAL_TESTS_NO_CACHES == 0
2288 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2289 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2291 # Current_value: tests/context tests/basic tests/cache tests/intr
2295 # Interface for cache presence
2296 # Some architectures and/or platforms do not have caches. By
2297 # implementing this interface, these can disable the various
2298 # cache-related tests.
2300 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2301 # No options implement this inferface
2302 # This value cannot be modified here.
2304 # Current value: 0 0
2306 # The following properties are affected by this value
2307 # component CYGPKG_HAL_TESTS
2308 # Calculated: "tests/context tests/basic"
2309 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2310 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2311 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2316 # The ARM architecture HAL package provides generic
2317 # support for this processor architecture. It is also
2318 # necessary to select a specific target platform HAL
2321 cdl_package CYGPKG_HAL_ARM {
2322 # Packages cannot be added or removed, nor can their version be changed,
2323 # simply by editing their value. Instead the appropriate configuration
2324 # should be used to perform these actions.
2326 # This value cannot be modified here.
2328 # Current value: 1 current
2330 # The following properties are affected by this value
2331 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2332 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2333 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2334 # ActiveIf: CYGPKG_HAL_ARM
2338 # The CPU architecture supports THUMB mode
2340 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2341 # No options implement this inferface
2342 # This value cannot be modified here.
2346 # The following properties are affected by this value
2347 # option CYGHWR_THUMB
2348 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2349 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2350 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2353 # Enable Thumb instruction set
2354 # Enable use of the Thumb instruction set.
2356 cdl_option CYGHWR_THUMB {
2357 # This option is not active
2358 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2359 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2363 # No user value, uncomment the following line to provide one.
2365 # value_source default
2368 # The following properties are affected by this value
2369 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2370 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2373 # Enable Thumb interworking compiler option
2374 # This option controls the use of -mthumb-interwork in the
2375 # compiler flags. It defaults enabled in Thumb or ROM monitor
2376 # configurations, but can be overridden for reduced memory
2377 # footprint where interworking is not a requirement.
2379 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2380 # This option is not active
2381 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2382 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2388 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2390 # CYGSEM_HAL_ROM_MONITOR == 1
2394 # The platform and architecture supports Big Endian operation
2396 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2397 # No options implement this inferface
2398 # This value cannot be modified here.
2402 # The following properties are affected by this value
2403 # option CYGHWR_HAL_ARM_BIGENDIAN
2404 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2407 # Use big-endian mode
2408 # Use the CPU in big-endian mode.
2410 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2411 # This option is not active
2412 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2413 # CYGINT_HAL_ARM_BIGENDIAN == 0
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2423 # The platform uses a processor with an ARM7 core
2425 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2426 # No options implement this inferface
2427 # This value cannot be modified here.
2431 # The following properties are affected by this value
2432 # option CYGHWR_HAL_ARM_CPU_FAMILY
2433 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2434 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2435 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2436 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2438 # option CYGHWR_HAL_ARM_CPU_FAMILY
2439 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2440 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2441 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2442 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2446 # The platform uses a processor with an ARM9 core
2448 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2449 # No options implement this inferface
2450 # This value cannot be modified here.
2454 # The following properties are affected by this value
2455 # option CYGHWR_HAL_ARM_CPU_FAMILY
2456 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2457 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2458 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2459 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2461 # option CYGHWR_HAL_ARM_CPU_FAMILY
2462 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2463 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2464 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2465 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2469 # The platform uses a processor with a StrongARM core
2471 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2472 # No options implement this inferface
2473 # This value cannot be modified here.
2477 # The following properties are affected by this value
2478 # option CYGHWR_HAL_ARM_CPU_FAMILY
2479 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2480 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2481 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2482 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2484 # option CYGHWR_HAL_ARM_CPU_FAMILY
2485 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2486 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2487 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2488 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2492 # The platform uses a processor with a XScale core
2494 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2495 # Implemented by CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2, active, enabled
2496 # This value cannot be modified here.
2500 # The following properties are affected by this value
2501 # option CYGHWR_HAL_ARM_CPU_FAMILY
2502 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2503 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2504 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2505 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2507 # option CYGHWR_HAL_ARM_CPU_FAMILY
2508 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2509 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2510 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2511 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2516 # It is possible to optimize code for different
2517 # ARM CPU families. This option selects which CPU to
2518 # optimize for on boards that support multiple CPU types.
2520 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2522 # No user value, uncomment the following line to provide one.
2524 # value_source default
2525 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2526 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2527 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2528 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2530 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2531 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2532 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2533 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2535 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2536 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2537 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2538 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2540 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2541 # CYGINT_HAL_ARM_ARCH_ARM9 == 0
2542 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2543 # CYGINT_HAL_ARM_ARCH_XSCALE == 1
2546 # Provide diagnostic dump for exceptions
2547 # Print messages about hardware exceptions, including
2548 # raw exception frame dump and register contents.
2550 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2552 # No user value, uncomment the following line to provide one.
2554 # value_source default
2556 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2557 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2561 # Process all exceptions with the eCos application
2562 # Normal RAM-based programs which do not include GDB stubs
2563 # defer processing of the illegal instruction exception to GDB.
2564 # Setting this options allows the program to explicitly handle
2565 # the illegal instruction exception itself. Note: this will
2566 # prevent the use of GDB to debug the application as breakpoints
2567 # will no longer work.
2569 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2571 # No user value, uncomment the following line to provide one.
2573 # value_source default
2577 # Support GDB thread operations via ICE/Multi-ICE
2578 # Allow GDB to get thread information via the ICE/Multi-ICE
2581 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2583 # No user value, uncomment the following line to provide one.
2585 # value_source default
2587 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2588 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
2590 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2591 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
2593 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2594 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2598 # Support for 'gprof' callbacks
2599 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
2600 # to acquire the interrupt-context PC and SP, when this option is
2603 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
2604 # This option is not active
2605 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2606 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2608 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2609 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
2610 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
2613 # Calculated value: 1
2620 cdl_option CYGBLD_LINKER_SCRIPT {
2621 # Calculated value: "src/arm.ld"
2623 # Current_value: src/arm.ld
2626 # Implementations of hal_arm_mem_real_region_top()
2628 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
2629 # No options implement this inferface
2630 # This value cannot be modified here.
2635 # Karo Triton XScale evaluation boards
2636 # The TRITON_ETN_STK2 HAL package provides the support needed to run
2637 # eCos on a Karo TRITON ETN board located on a Starter Kit II.
2639 cdl_package CYGPKG_HAL_ARM_XSCALE_TRITON_ETN_STK2 {
2640 # Packages cannot be added or removed, nor can their version be changed,
2641 # simply by editing their value. Instead the appropriate configuration
2642 # should be used to perform these actions.
2644 # This value cannot be modified here.
2646 # Current value: 1 current
2651 # When targetting the KARO TRITON eval board it is possible to build
2652 # the system for either RAM bootstrap or ROM bootstrap(s). Select
2653 # 'ram' when building programs to load into RAM using onboard
2654 # debug software such as Angel or eCos GDB stubs. Select 'rom'
2655 # when building a stand-alone application which will be put
2656 # into ROM. Selection of 'stubs' is for the special case of
2657 # building the eCos GDB stubs themselves.
2659 cdl_component CYG_HAL_STARTUP {
2663 # Default value: RAM
2664 # Legal values: "RAM" "ROM"
2666 # The following properties are affected by this value
2667 # option CYGBLD_BUILD_GDB_STUBS
2668 # Requires: CYG_HAL_STARTUP == "ROM"
2669 # component CYGHWR_MEMORY_LAYOUT
2670 # Calculated: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_roma" : "arm_xscale_triton_rom"
2671 # option CYGHWR_MEMORY_LAYOUT_LDI
2672 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>"
2673 # option CYGHWR_MEMORY_LAYOUT_H
2674 # Calculated: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.h>"
2675 # option CYGSEM_HAL_ROM_MONITOR
2676 # Requires: CYG_HAL_STARTUP == "ROM"
2677 # option CYGSEM_HAL_USE_ROM_MONITOR
2678 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2679 # option CYGSEM_HAL_USE_ROM_MONITOR
2680 # Requires: CYG_HAL_STARTUP == "RAM"
2681 # option CYGSEM_HAL_INSTALL_MMU_TABLES
2682 # DefaultValue: CYG_HAL_STARTUP != "RAM"
2683 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2684 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2685 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2686 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2687 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2688 # ActiveIf: CYG_HAL_STARTUP != "RAM"
2689 # option CYGPRI_REDBOOT_ROM_MONITOR
2690 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2691 # option CYGPRI_REDBOOT_ROM_MONITOR
2692 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2695 # Coexist with ARM bootloader
2696 # Enable this option if the ARM bootloader is programmed into
2697 # the FLASH boot sector on the board.
2699 cdl_option CYGSEM_HAL_ARM__XSCALE_TRITON_ARMBOOT {
2701 # No user value, uncomment the following line to provide one.
2703 # value_source default
2707 # Default console channel.
2709 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
2710 # Calculated value: 0
2713 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2714 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2717 # Number of communication channels on the board
2719 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
2720 # Calculated value: 1
2724 # The following properties are affected by this value
2725 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
2726 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2727 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2728 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2729 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2730 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2734 # This option chooses which port will be used to connect to a host
2737 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
2739 # No user value, uncomment the following line to provide one.
2741 # value_source default
2743 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2744 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2747 # Diagnostic serial port
2748 # The TRITON board has only one serial port. This option
2749 # chooses which port will be used for diagnostic output.
2751 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
2753 # No user value, uncomment the following line to provide one.
2755 # value_source default
2757 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
2758 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 1
2761 # Diagnostic serial port baud rate
2762 # This option selects the baud rate used for the diagnostic port.
2763 # Note: this should match the value chosen for the GDB port if the
2764 # diagnostic and GDB port are the same.
2766 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
2768 # No user value, uncomment the following line to provide one.
2770 # value_source default
2771 # Default value: 38400
2772 # Legal values: 9600 19200 38400 57600 115200
2775 # GDB serial port baud rate
2776 # This option selects the baud rate used for the GDB port.
2778 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
2780 # No user value, uncomment the following line to provide one.
2782 # value_source default
2783 # Default value: 38400
2784 # Legal values: 9600 19200 38400 57600 115200
2787 # Real-time clock constants
2789 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
2790 # There is no associated value.
2794 # Real-time clock numerator
2796 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
2797 # Calculated value: 1000000000
2799 # Current_value: 1000000000
2802 # Real-time clock denominator
2804 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
2805 # Calculated value: 100
2807 # Current_value: 100
2810 # Real-time clock period
2812 cdl_option CYGNUM_HAL_RTC_PERIOD {
2813 # Calculated value: 330000
2815 # Current_value: 330000
2819 # XScale TRITON build options
2820 # Package specific build options including control over
2821 # compiler flags used only in building this package,
2822 # and details of which tests are built.
2824 cdl_component CYGPKG_HAL_ARM_XSCALE_TRITON_OPTIONS {
2825 # There is no associated value.
2829 # Additional compiler flags
2830 # This option modifies the set of compiler flags for
2831 # building the XScale TRITON HAL. These flags are used
2832 # in addition to the set of global flags.
2834 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_ADD {
2836 # No user value, uncomment the following line to provide one.
2838 # value_source default
2842 # Suppressed compiler flags
2843 # This option modifies the set of compiler flags for
2844 # building the XScale TRITON HAL. These flags are
2845 # removed from the set of global flags if present.
2847 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_CFLAGS_REMOVE {
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # XScale TRITON tests
2856 # This option specifies the set of tests for the XScale TRITON HAL.
2858 cdl_option CYGPKG_HAL_ARM_XSCALE_TRITON_TESTS {
2859 # Calculated value: ""
2867 cdl_component CYGHWR_MEMORY_LAYOUT {
2868 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "arm_xscale_triton_ram" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "arm_xscale_triton_roma" : "arm_xscale_triton_rom"
2869 # CYG_HAL_STARTUP == ROM
2870 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2872 # Current_value: arm_xscale_triton_rom
2876 # Memory layout linker script fragment
2878 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
2879 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.ldi>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.ldi>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>"
2880 # CYG_HAL_STARTUP == ROM
2881 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2883 # Current_value: <pkgconf/mlt_arm_xscale_triton_stk_rom.ldi>
2886 # Memory layout header file
2888 cdl_option CYGHWR_MEMORY_LAYOUT_H {
2889 # Calculated value: CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_arm_xscale_triton_stk_ram.h>" : CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT ? "<pkgconf/mlt_arm_xscale_triton_stk_roma.h>" : "<pkgconf/mlt_arm_xscale_triton_stk_rom.h>"
2890 # CYG_HAL_STARTUP == ROM
2891 # CYGSEM_HAL_ARM_XSCALE_TRITON_ARMBOOT (unknown) == 0
2893 # Current_value: <pkgconf/mlt_arm_xscale_triton_stk_rom.h>
2901 # Common types and useful macros.
2902 # Tracing and assertion facilities.
2903 # Package startup options.
2905 cdl_package CYGPKG_INFRA {
2906 # Packages cannot be added or removed, nor can their version be changed,
2907 # simply by editing their value. Instead the appropriate configuration
2908 # should be used to perform these actions.
2910 # This value cannot be modified here.
2912 # Current value: 1 current
2914 # The following properties are affected by this value
2915 # package CYGPKG_HAL
2916 # Requires: CYGPKG_INFRA
2917 # component CYGBLD_BUILD_REDBOOT
2918 # Requires: CYGPKG_INFRA
2923 # The eCos source code contains a significant amount of
2924 # internal debugging support, in the form of assertions and
2926 # Assertions check at runtime that various conditions are as
2927 # expected; if not, execution is halted.
2928 # Tracing takes the form of text messages that are output
2929 # whenever certain events occur, or whenever functions are
2931 # The most important property of these checks and messages is
2932 # that they are not required for the program to run.
2933 # It is prudent to develop software with assertions enabled,
2934 # but disable them when making a product release, thus
2935 # removing the overhead of that checking.
2936 # It is possible to enable assertions and tracing
2938 # There are also options controlling the exact behaviour of
2939 # the assertion and tracing facilities, thus giving users
2940 # finer control over the code and data size requirements.
2942 cdl_component CYGPKG_INFRA_DEBUG {
2944 # No user value, uncomment the following line to provide one.
2946 # value_source default
2952 # If this option is defined, asserts in the code are tested.
2953 # Assert functions (CYG_ASSERT()) are defined in
2954 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
2955 # If it is not defined, these result in no additional
2956 # object code and no checking of the asserted conditions.
2958 cdl_component CYGDBG_USE_ASSERTS {
2959 # This option is not active
2960 # The parent CYGPKG_INFRA_DEBUG is disabled
2963 # No user value, uncomment the following line to provide one.
2965 # value_source default
2967 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
2968 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
2974 # This option allows individual control of preconditions.
2975 # A precondition is one type of assert, which it is
2976 # useful to control separately from more general asserts.
2977 # The function is CYG_PRECONDITION(condition,msg).
2979 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
2980 # This option is not active
2981 # The parent CYGDBG_USE_ASSERTS is not active
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2991 # This option allows individual control of postconditions.
2992 # A postcondition is one type of assert, which it is
2993 # useful to control separately from more general asserts.
2994 # The function is CYG_POSTCONDITION(condition,msg).
2996 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
2997 # This option is not active
2998 # The parent CYGDBG_USE_ASSERTS is not active
3001 # No user value, uncomment the following line to provide one.
3003 # value_source default
3008 # This option allows individual control of loop invariants.
3009 # A loop invariant is one type of assert, which it is
3010 # useful to control separately from more general asserts,
3011 # particularly since a loop invariant is typically evaluated
3012 # a great many times when used correctly.
3013 # The function is CYG_LOOP_INVARIANT(condition,msg).
3015 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3016 # This option is not active
3017 # The parent CYGDBG_USE_ASSERTS is not active
3020 # No user value, uncomment the following line to provide one.
3022 # value_source default
3027 # All assertions within eCos contain a text message
3028 # which should give some information about the condition
3030 # These text messages will end up being embedded in the
3031 # application image and hence there is a significant penalty
3032 # in terms of image size.
3033 # It is possible to suppress the use of these messages by
3034 # disabling this option.
3035 # This results in smaller code size, but there is less
3036 # human-readable information if an assertion actually gets
3039 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3040 # This option is not active
3041 # The parent CYGDBG_USE_ASSERTS is not active
3044 # No user value, uncomment the following line to provide one.
3046 # value_source default
3052 # If this option is defined, tracing operations
3053 # result in output or logging, depending on other options.
3054 # This may have adverse effects on performance, if the time
3055 # taken to output message overwhelms the available CPU
3056 # power or output bandwidth.
3057 # Trace functions (CYG_TRACE()) are defined in
3058 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3059 # If it is not defined, these result in no additional
3060 # object code and no trace information.
3062 cdl_component CYGDBG_USE_TRACING {
3063 # This option is not active
3064 # The parent CYGPKG_INFRA_DEBUG is disabled
3067 # No user value, uncomment the following line to provide one.
3069 # value_source default
3071 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3072 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3075 # The following properties are affected by this value
3076 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3077 # ActiveIf: CYGDBG_USE_TRACING
3078 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3079 # ActiveIf: CYGDBG_USE_TRACING
3080 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3081 # ActiveIf: CYGDBG_USE_TRACING
3082 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3083 # ActiveIf: CYGDBG_USE_TRACING
3084 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3085 # ActiveIf: CYGDBG_USE_TRACING
3089 # Trace function reports
3090 # This option allows individual control of
3091 # function entry/exit tracing, independent of
3092 # more general tracing output.
3093 # This may be useful to remove clutter from a
3096 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3097 # This option is not active
3098 # The parent CYGDBG_USE_TRACING is not active
3099 # The parent CYGDBG_USE_TRACING is disabled
3102 # No user value, uncomment the following line to provide one.
3104 # value_source default
3109 # All trace calls within eCos contain a text message
3110 # which should give some information about the circumstances.
3111 # These text messages will end up being embedded in the
3112 # application image and hence there is a significant penalty
3113 # in terms of image size.
3114 # It is possible to suppress the use of these messages by
3115 # disabling this option.
3116 # This results in smaller code size, but there is less
3117 # human-readable information available in the trace output,
3118 # possibly only filenames and line numbers.
3120 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3121 # This option is not active
3122 # The parent CYGDBG_USE_TRACING is not active
3123 # The parent CYGDBG_USE_TRACING is disabled
3126 # No user value, uncomment the following line to provide one.
3128 # value_source default
3133 # Trace output implementations
3135 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3136 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3137 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3138 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3139 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3140 # This option is not active
3141 # The parent CYGPKG_INFRA_DEBUG is disabled
3143 # This value cannot be modified here.
3147 # The following properties are affected by this value
3148 # component CYGDBG_USE_ASSERTS
3149 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3150 # component CYGDBG_USE_TRACING
3151 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3155 # A null output module which is useful when
3156 # debugging interactively; the output routines
3157 # can be breakpointed rather than have them actually
3158 # 'print' something.
3160 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3161 # This option is not active
3162 # The parent CYGPKG_INFRA_DEBUG is disabled
3165 # No user value, uncomment the following line to provide one.
3167 # value_source default
3172 # An output module which produces simple output
3173 # from tracing and assertion events.
3175 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3176 # This option is not active
3177 # The parent CYGPKG_INFRA_DEBUG is disabled
3180 # No user value, uncomment the following line to provide one.
3182 # value_source default
3187 # An output module which produces fancy output
3188 # from tracing and assertion events.
3190 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3191 # This option is not active
3192 # The parent CYGPKG_INFRA_DEBUG is disabled
3195 # No user value, uncomment the following line to provide one.
3197 # value_source default
3202 # An output module which buffers output
3203 # from tracing and assertion events. The stored
3204 # messages are output when an assert fires, or
3205 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3207 # Of course, there will only be stored messages
3208 # if tracing per se (CYGDBG_USE_TRACING)
3211 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3212 # This option is not active
3213 # The parent CYGPKG_INFRA_DEBUG is disabled
3216 # No user value, uncomment the following line to provide one.
3218 # value_source default
3224 # The size of the trace buffer. This counts the number
3225 # of trace records stored. When the buffer fills it
3226 # either wraps, stops recording, or generates output.
3228 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3229 # This option is not active
3230 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3231 # ActiveIf constraint: CYGDBG_USE_TRACING
3232 # CYGDBG_USE_TRACING == 0
3236 # No user value, uncomment the following line to provide one.
3238 # value_source default
3240 # Legal values: 5 to 65535
3243 # Wrap trace buffer when full
3244 # When the trace buffer has filled with records it
3245 # starts again at the beginning. Hence only the last
3246 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3249 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3250 # This option is not active
3251 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3252 # ActiveIf constraint: CYGDBG_USE_TRACING
3253 # CYGDBG_USE_TRACING == 0
3257 # No user value, uncomment the following line to provide one.
3259 # value_source default
3263 # Halt trace buffer when full
3264 # When the trace buffer has filled with records it
3265 # stops recording. Hence only the first
3266 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3269 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3270 # This option is not active
3271 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3272 # ActiveIf constraint: CYGDBG_USE_TRACING
3273 # CYGDBG_USE_TRACING == 0
3277 # No user value, uncomment the following line to provide one.
3279 # value_source default
3283 # Print trace buffer when full
3284 # When the trace buffer has filled with records it
3285 # prints the contents of the buffer. The buffer is then
3286 # emptied and the system continues.
3288 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3289 # This option is not active
3290 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3291 # ActiveIf constraint: CYGDBG_USE_TRACING
3292 # CYGDBG_USE_TRACING == 0
3296 # No user value, uncomment the following line to provide one.
3298 # value_source default
3302 # Print trace buffer on assert fail
3303 # When an assertion fails the trace buffer will be
3304 # printed to the default diagnostic device.
3306 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3307 # This option is not active
3308 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3309 # ActiveIf constraint: CYGDBG_USE_TRACING
3310 # CYGDBG_USE_TRACING == 0
3314 # No user value, uncomment the following line to provide one.
3316 # value_source default
3321 # Use function names
3322 # All trace and assert calls within eCos contain a
3323 # reference to the builtin macro '__PRETTY_FUNCTION__',
3324 # which evaluates to a string containing
3325 # the name of the current function.
3326 # This is useful when reading a trace log.
3327 # It is possible to suppress the use of the function name
3328 # by disabling this option.
3329 # This results in smaller code size, but there is less
3330 # human-readable information available in the trace output,
3331 # possibly only filenames and line numbers.
3333 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3334 # This option is not active
3335 # The parent CYGPKG_INFRA_DEBUG is disabled
3338 # No user value, uncomment the following line to provide one.
3340 # value_source default
3346 # Some packages require a startup routine to be called.
3347 # This can be carried out by application code, by supplying
3348 # a routine called cyg_package_start() which calls the
3349 # appropriate package startup routine(s).
3350 # Alternatively, this routine can be constructed automatically
3351 # and configured to call the startup routines of your choice.
3353 cdl_component CYGPKG_INFRA_STARTUP {
3354 # There is no associated value.
3358 # Start uITRON subsystem
3359 # Generate a call to initialize the
3360 # uITRON compatibility subsystem
3361 # within the system version of cyg_package_start().
3362 # This enables compatibility with uITRON.
3363 # You must configure uITRON with the correct tasks before
3364 # starting the uItron subsystem.
3365 # If this is disabled, and you want to use uITRON,
3366 # you must call cyg_uitron_start() from your own
3367 # cyg_package_start() or cyg_userstart().
3369 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
3370 # This option is not active
3371 # ActiveIf constraint: CYGPKG_UITRON
3372 # CYGPKG_UITRON (unknown) == 0
3376 # No user value, uncomment the following line to provide one.
3378 # value_source default
3380 # Requires: CYGPKG_UITRON
3381 # CYGPKG_UITRON (unknown) == 0
3386 # Smaller slower memcpy()
3387 # Enabling this option causes the implementation of
3388 # the standard memcpy() routine to reduce code
3389 # size at the expense of execution speed. This
3390 # option is automatically enabled with the use of
3391 # the -Os option to the compiler. Also note that
3392 # the compiler will try to use its own builtin
3393 # version of memcpy() if possible, ignoring the
3394 # implementation in this package, unless given
3395 # the -fno-builtin compiler option.
3397 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
3399 # No user value, uncomment the following line to provide one.
3401 # value_source default
3405 # Smaller slower memset()
3406 # Enabling this option causes the implementation of
3407 # the standard memset() routine to reduce code
3408 # size at the expense of execution speed. This
3409 # option is automatically enabled with the use of
3410 # the -Os option to the compiler. Also note that
3411 # the compiler will try to use its own builtin
3412 # version of memset() if possible, ignoring the
3413 # implementation in this package, unless given
3414 # the -fno-builtin compiler option.
3416 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
3418 # No user value, uncomment the following line to provide one.
3420 # value_source default
3424 # Provide empty C++ delete functions
3425 # To deal with virtual destructors, where the correct delete()
3426 # function must be called for the derived class in question, the
3427 # underlying delete is called when needed, from destructors. This
3428 # is regardless of whether the destructor is called by delete itself.
3429 # So there is a reference to delete() from all destructors. The
3430 # default builtin delete() attempts to call free() if there is
3431 # one defined. So, if you have destructors, and you have free(),
3432 # as in malloc() and free(), any destructor counts as a reference
3433 # to free(). So the dynamic memory allocation code is linked
3434 # in regardless of whether it gets explicitly called. This
3435 # increases code and data size needlessly.
3436 # To defeat this undesirable behaviour, we define empty versions
3437 # of delete and delete. But doing this prevents proper use
3438 # of dynamic memory in C++ programs via C++'s new and delete
3440 # Therefore, this option is provided
3441 # for explicitly disabling the provision of these empty functions,
3442 # so that new and delete can be used, if that is what is required.
3444 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
3446 # No user value, uncomment the following line to provide one.
3448 # value_source default
3452 # Provide dummy abort() function
3453 # This option controls the inclusion of a dummy abort() function.
3454 # Parts of the C and C++ compiler runtime systems contain references
3455 # to abort(), particulary in the C++ exception handling code. It is
3456 # not possible to eliminate these references, so this dummy function
3457 # in included to satisfy them. It is not expected that this function
3458 # will ever be called, so its current behaviour is to simply loop.
3460 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
3462 # No user value, uncomment the following line to provide one.
3464 # value_source default
3465 # Default value: CYGINT_ISO_EXIT == 0
3466 # CYGINT_ISO_EXIT == 0
3468 # Requires: !CYGINT_ISO_EXIT
3469 # CYGINT_ISO_EXIT == 0
3473 # Provide dummy strlen() function
3474 # This option controls the inclusion of a dummy strlen() function.
3475 # Parts of the C and C++ compiler runtime systems contain references
3476 # to strlen(), particulary in the C++ exception handling code. It is
3477 # not possible to eliminate these references, so this dummy function
3478 # in included to satisfy them. While it is not expected that this function
3479 # will ever be called, it is functional but uses the simplest, smallest
3480 # algorithm. There is a faster version of strlen() in the C library.
3482 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
3484 # No user value, uncomment the following line to provide one.
3486 # value_source default
3487 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
3488 # CYGINT_ISO_STRING_STRFUNCS == 1
3490 # Requires: !CYGINT_ISO_STRING_STRFUNCS
3491 # CYGINT_ISO_STRING_STRFUNCS == 1
3495 # Make all compiler warnings show as errors
3496 # Enabling this option will cause all compiler warnings to show
3497 # as errors and bring the library build to a halt. This is used
3498 # to ensure that the code base is warning free, and thus ensure
3499 # that newly introduced warnings stand out and get fixed before
3500 # they show up as weird run-time behavior.
3502 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
3504 # No user value, uncomment the following line to provide one.
3506 # value_source default
3508 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
3509 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3513 # Make compiler and assembler communicate by pipe
3514 # Enabling this option will cause the compiler to feed the
3515 # assembly output the the assembler via a pipe instead of
3516 # via a temporary file. This normally reduces the build
3519 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
3521 # No user value, uncomment the following line to provide one.
3523 # value_source default
3525 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
3526 # CYGBLD_GLOBAL_CFLAGS == "-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-builtin -fno-exceptions -finit-priority -mapcs-frame"
3530 # Infra build options
3531 # Package specific build options including control over
3532 # compiler flags used only in building this package.
3534 cdl_component CYGPKG_INFRA_OPTIONS {
3535 # There is no associated value.
3539 # Additional compiler flags
3540 # This option modifies the set of compiler flags for
3541 # building the eCos infra package. These flags are used
3542 # in addition to the set of global flags.
3544 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
3546 # No user value, uncomment the following line to provide one.
3548 # value_source default
3552 # Suppressed compiler flags
3553 # This option modifies the set of compiler flags for
3554 # building the eCos infra package. These flags are removed from
3555 # the set of global flags if present.
3557 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
3559 # No user value, uncomment the following line to provide one.
3561 # value_source default
3565 # Suppressed linker flags
3566 # This option modifies the set of linker flags for
3567 # building the eCos infra package tests. These flags are removed from
3568 # the set of global flags if present.
3570 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
3572 # No user value, uncomment the following line to provide one.
3573 # user_value -Wl,--gc-sections
3574 # value_source default
3575 # Default value: -Wl,--gc-sections
3578 # Additional linker flags
3579 # This option modifies the set of linker flags for
3580 # building the eCos infra package tests. These flags are added to
3581 # the set of global flags if present.
3583 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
3585 # No user value, uncomment the following line to provide one.
3586 # user_value -Wl,--fatal-warnings
3587 # value_source default
3588 # Default value: -Wl,--fatal-warnings
3591 # Infra package tests
3593 cdl_option CYGPKG_INFRA_TESTS {
3594 # Calculated value: "tests/cxxsupp"
3596 # Current_value: tests/cxxsupp
3601 # Redboot ROM monitor
3602 # doc: ref/redboot.html
3603 # This package supports the Redboot [stand-alone debug monitor]
3604 # using eCos as the underlying board support mechanism.
3606 cdl_package CYGPKG_REDBOOT {
3607 # Packages cannot be added or removed, nor can their version be changed,
3608 # simply by editing their value. Instead the appropriate configuration
3609 # should be used to perform these actions.
3611 # This value cannot be modified here.
3613 # Current value: 1 current
3615 # The following properties are affected by this value
3616 # component CYGPKG_REDBOOT_ARM_OPTIONS
3617 # ActiveIf: CYGPKG_REDBOOT
3618 # component CYGPKG_REDBOOT_XSCALE_OPTIONS
3619 # ActiveIf: CYGPKG_REDBOOT
3620 # component CYGPKG_REDBOOT_HAL_OPTIONS
3621 # ActiveIf: CYGPKG_REDBOOT
3622 # option CYGSEM_IO_ETH_DRIVERS_WARN
3623 # ActiveIf: CYGPKG_REDBOOT
3627 # Include support for ELF file format
3629 cdl_option CYGSEM_REDBOOT_ELF {
3631 # No user value, uncomment the following line to provide one.
3633 # value_source default
3637 # Methods of loading images using redboot
3639 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
3640 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
3641 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
3642 # This value cannot be modified here.
3646 # The following properties are affected by this value
3647 # component CYGBLD_BUILD_REDBOOT
3648 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3651 # Build Redboot ROM ELF image
3652 # This option enables the building of the Redboot ELF image.
3653 # The image may require further relocation or symbol
3654 # stripping before being converted to a binary image.
3655 # This is handled by a rule in the target CDL.
3657 cdl_component CYGBLD_BUILD_REDBOOT {
3662 # Requires: CYGPKG_INFRA
3663 # CYGPKG_INFRA == current
3665 # Requires: CYGPKG_ISOINFRA
3666 # CYGPKG_ISOINFRA == current
3668 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3669 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3670 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 1
3672 # Requires: !CYGINT_HAL_DEBUG_GDB_STUBS || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3673 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
3674 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 1
3676 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
3677 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3679 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
3680 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
3682 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
3683 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
3685 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
3686 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
3688 # Requires: CYGINT_ISO_STRING_MEMFUNCS
3689 # CYGINT_ISO_STRING_MEMFUNCS == 1
3691 # Requires: CYGINT_ISO_STRING_STRFUNCS
3692 # CYGINT_ISO_STRING_STRFUNCS == 1
3694 # Requires: CYGINT_REDBOOT_LOAD_METHOD
3695 # CYGINT_REDBOOT_LOAD_METHOD == 2
3698 # The following properties are affected by this value
3699 # option CYGBLD_BUILD_REDBOOT_BIN
3700 # ActiveIf: CYGBLD_BUILD_REDBOOT
3704 # Threads debugging support
3705 # Enabling this option will include special code in the GDB stubs to
3706 # support debugging of threaded programs. In the case of eCos programs,
3707 # this support allows GDB to have complete access to the eCos threads
3710 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
3711 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
3712 # CYG_HAL_STARTUP == ROM
3716 # No user value, uncomment the following line to provide one.
3718 # value_source default
3720 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3721 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3725 # Customized version string
3726 # Use this option to define a customized version "string" for
3727 # RedBoot. Note: this value is only cosmetic, displayed by the
3728 # "version" command, but is useful for providing site specific
3729 # information about the RedBoot configuration.
3731 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
3735 # Default value: 0 0
3738 # Enable command line editing
3739 # If this option is non-zero, RedBoot will remember the last N command
3740 # lines. These lines may be reused. Enabling this history will also
3741 # enable rudimentary editting of the lines themselves.
3743 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
3745 # No user value, uncomment the following line to provide one.
3747 # value_source default
3751 # Include support gzip/zlib decompression
3753 cdl_option CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
3754 # This option is not active
3755 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
3756 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
3760 # No user value, uncomment the following line to provide one.
3762 # value_source default
3765 # The following properties are affected by this value
3766 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
3767 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
3770 # Include support for xyzModem downloads
3771 # doc: ref/download-command.html
3773 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
3775 # No user value, uncomment the following line to provide one.
3777 # value_source default
3781 # Include MS Windows CE support
3782 # doc: ref/wince.html
3783 # This option enables MS Windows CE EShell support
3784 # and Windows CE .BIN images support
3786 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
3788 # No user value, uncomment the following line to provide one.
3790 # value_source default
3794 # Include POSIX checksum command
3795 # doc: ref/cksum-command.html
3797 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
3799 # No user value, uncomment the following line to provide one.
3801 # value_source default
3805 # Include memory fill command
3806 # doc: ref/mfill-command.html
3808 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
3810 # No user value, uncomment the following line to provide one.
3812 # value_source default
3816 # Include memory compare command
3817 # doc: ref/mcmp-command.html
3819 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
3821 # No user value, uncomment the following line to provide one.
3823 # value_source default
3827 # Include memory dump command
3828 # doc: ref/dump-command.html
3830 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
3832 # No user value, uncomment the following line to provide one.
3834 # value_source default
3838 # Include cache command
3839 # doc: ref/cache-command.html
3841 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
3843 # No user value, uncomment the following line to provide one.
3845 # value_source default
3849 # Include exec command
3850 # doc: ref/exec-command.html
3852 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
3854 # No user value, uncomment the following line to provide one.
3856 # value_source default
3859 # The following properties are affected by this value
3860 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
3861 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
3864 # Redboot Networking
3865 # This option includes networking support in RedBoot.
3867 cdl_component CYGPKG_REDBOOT_NETWORKING {
3868 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
3869 # CYGPKG_IO_ETH_DRIVERS == current
3873 # No user value, uncomment the following line to provide one.
3875 # value_source default
3878 # The following properties are affected by this value
3879 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
3880 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
3884 # Print net debug information
3885 # This option is overriden by the configuration stored in flash.
3887 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
3889 # No user value, uncomment the following line to provide one.
3891 # value_source default
3895 # Support HTTP for download
3896 # This option enables the use of the HTTP protocol for download
3898 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
3905 # Default IP address
3906 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3907 # server does not respond. The numbers should be separated by
3908 # *commas*, and not dots. If an IP address is configured into
3909 # the Flash configuration, that will be used in preference.
3911 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
3913 # No user value, uncomment the following line to provide one.
3915 # value_source default
3916 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3917 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3922 # Do not try to use BOOTP
3923 # By default Redboot tries to use BOOTP to get an IP
3924 # address. If there's no BOOTP server on your network
3925 # use this option to avoid to wait until the
3926 # timeout. This option is overriden by the
3927 # configuration stored in flash.
3929 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
3930 # This option is not active
3931 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
3934 # No user value, uncomment the following line to provide one.
3936 # value_source default
3941 # Use DHCP to get IP information
3942 # Use DHCP protocol to obtain pertinent IP addresses, such
3943 # as the client, server, gateway, etc.
3945 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
3947 # No user value, uncomment the following line to provide one.
3949 # value_source default
3953 # Use a gateway for non-local IP traffic
3954 # Enabling this option will allow the RedBoot networking
3955 # stack to use a [single] gateway to reach a non-local
3956 # IP address. If disabled, RedBoot will only be able to
3957 # reach nodes on the same subnet.
3959 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
3961 # No user value, uncomment the following line to provide one.
3963 # value_source default
3968 # Default gateway IP address
3969 # This IP address is the default used by RedBoot if a BOOTP/DHCP
3970 # server does not respond. The numbers should be separated by
3971 # *commas*, and not dots. If an IP address is configured into
3972 # the Flash configuration, that will be used in preference.
3974 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
3976 # No user value, uncomment the following line to provide one.
3978 # value_source default
3979 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
3980 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
3984 # Default IP address mask
3985 # This IP address mask is the default used by RedBoot if a BOOTP/DHCP
3986 # server does not respond. The numbers should be separated by
3987 # *commas*, and not dots. If an IP address is configured into
3988 # the Flash configuration, that will be used in preference.
3990 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
3992 user_value 0 255,255,255,0
3994 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
3995 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4000 # TCP port to listen for incoming connections
4001 # RedBoot will 'listen' on this port for incoming TCP connections.
4002 # This allows outside connections to be made to the platform, either
4003 # for GDB or RedBoot commands.
4005 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4007 # No user value, uncomment the following line to provide one.
4009 # value_source default
4010 # Default value: 9000
4013 # Number of [network] packet buffers
4014 # RedBoot may need to buffer network data to support various connections.
4015 # This option allows control over the number of such buffered packets,
4016 # and in turn, controls the amount of memory used by RedBoot (which
4017 # is not available to user applications). Each packet buffer takes up
4018 # about 1514 bytes. Note: there is little need to make this larger
4021 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
4023 # No user value, uncomment the following line to provide one.
4025 # value_source default
4027 # Legal values: 3 to 8
4031 # When this option is enabled, RedBoot will be built with
4032 # support for DNS, allowing use of hostnames on the command
4035 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
4040 # Requires: CYGPKG_NS_DNS
4041 # CYGPKG_NS_DNS == current
4043 # Requires: !CYGPKG_NS_DNS_BUILD
4044 # CYGPKG_NS_DNS_BUILD == 0
4050 # This option sets the IP of the default DNS. The IP can be
4051 # changed at runtime as well.
4053 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
4054 # This option is not active
4055 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is disabled
4056 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
4057 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4061 # No user value, uncomment the following line to provide one.
4062 # user_value 0.0.0.0
4063 # value_source default
4064 # Default value: 0.0.0.0
4067 # Timeout in DNS lookup
4068 # This option sets the timeout used when looking up an
4069 # address via the DNS. Default is 10 seconds.
4071 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
4072 # This option is not active
4073 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is disabled
4076 # No user value, uncomment the following line to provide one.
4078 # value_source default
4084 # Allow RedBoot to use any I/O channel for its console.
4085 # If this option is enabled then RedBoot will attempt to use all
4086 # defined serial I/O channels for its console device. Once input
4087 # arrives at one of these channels then the console will use only
4090 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
4097 # Allow RedBoot to adjust the baud rate on the serial console.
4098 # If this option is enabled then RedBoot will support commands to set
4099 # and query the baud rate on the selected console.
4101 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
4102 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
4103 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
4107 # No user value, uncomment the following line to provide one.
4109 # value_source default
4113 # Maximum command line length
4114 # This option allows control over how long the CLI command line
4115 # should be. This space will be allocated statically
4116 # rather than from RedBoot's stack.
4118 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
4122 # Default value: 256
4125 # Command processing idle timeout (ms)
4126 # This option controls the timeout period before the
4127 # command processing is considered 'idle'. Making this
4128 # number smaller will cause idle processing to take place
4129 # more often, etc. The default value of 10ms is a reasonable
4130 # tradeoff between responsiveness and overhead.
4132 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
4134 # No user value, uncomment the following line to provide one.
4136 # value_source default
4140 # Size of zlib decompression buffer
4141 # This is the size of the buffer filled with incoming data
4142 # during load before calls are made to the decompressor
4143 # function. For ethernet downloads this can be made bigger
4144 # (at the cost of memory), but for serial downloads on slow
4145 # processors it may be necessary to reduce the size to
4146 # avoid serial overruns. zlib appears to bail out if less than
4147 # five bytes are available initially so this is the minimum.
4149 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4150 # This option is not active
4151 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4152 # CYGPKG_COMPRESS_ZLIB (unknown) == 0
4156 # No user value, uncomment the following line to provide one.
4158 # value_source default
4160 # Legal values: 5 to 256
4163 # Validate RAM addresses during load
4164 # This option controls whether or not RedBoot will make sure that
4165 # memory being used by the "load" command is in fact in user RAM.
4166 # Leaving the option enabled makes for a safer environment, but this
4167 # check may not be valid on all platforms, thus the ability to
4168 # disable it. ** Disable this only with great care **
4170 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
4172 # No user value, uncomment the following line to provide one.
4174 # value_source default
4178 # Allow RedBoot to support FLASH programming
4179 # If this option is enabled then RedBoot will provide commands
4180 # to manage images in FLASH memory. These images can be loaded
4181 # into memory for execution or executed in place.
4183 cdl_component CYGPKG_REDBOOT_FLASH {
4184 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
4185 # CYGHWR_IO_FLASH_DEVICE == 1
4189 # No user value, uncomment the following line to provide one.
4191 # value_source default
4196 # Minimum image size
4197 # This option controls the minimum length of images kept by
4198 # the FIS. In particular, it should be large enough to hold
4199 # the RedBoot primary image itself, as well as be a natural
4200 # multiple of the FLASH erase block size.
4202 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
4204 user_value 0x00040000
4206 # Default value: 0x00020000
4209 # Offset from start of FLASH to RedBoot boot image
4210 # This option controls where the RedBoot boot image is located
4211 # relative to the start of FLASH.
4213 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
4215 # No user value, uncomment the following line to provide one.
4217 # value_source default
4218 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4219 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4221 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4222 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4223 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
4226 # The following properties are affected by this value
4227 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4228 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4229 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
4230 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4233 # Size of reserved area at start of FLASH
4234 # This option reserves an area at the start of FLASH where RedBoot
4235 # will never interfere; it is expected that this area contains
4236 # (non-RedBoot-based) POST code or some other boot monitor that
4237 # executes before RedBoot.
4239 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
4241 # No user value, uncomment the following line to provide one.
4243 # value_source default
4246 # The following properties are affected by this value
4247 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4248 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4249 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4250 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4251 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
4252 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4255 # RedBoot Flash Image System support
4256 # doc: ref/flash-image-system.html
4257 # This option enables the Flash Image System commands
4258 # and support within RedBoot. If disabled, simple Flash
4259 # access commands such as "fis write" will still exist.
4260 # This option would be disabled for targets that need simple
4261 # FLASH manipulation, but do not have the need or space for
4262 # complete image management.
4264 cdl_option CYGOPT_REDBOOT_FIS {
4266 # No user value, uncomment the following line to provide one.
4268 # value_source default
4271 # The following properties are affected by this value
4272 # component CYGPKG_REDBOOT_FIS_CONTENTS
4273 # ActiveIf: CYGOPT_REDBOOT_FIS
4274 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
4275 # ActiveIf: CYGOPT_REDBOOT_FIS
4276 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4277 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4280 # Flash Image System default directory contents
4282 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
4283 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
4284 # CYGOPT_REDBOOT_FIS == 1
4287 # Calculated value: 1
4293 # Flash block containing the Directory
4294 # Which block of flash should hold the directory
4295 # information. Positive numbers are absolute block numbers.
4296 # Negative block numbers count backwards from the last block.
4297 # eg 2 means block 2, -2 means the last but one block.
4299 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
4301 # No user value, uncomment the following line to provide one.
4303 # value_source default
4307 # Pseudo-file to describe reserved area
4308 # If an area of FLASH is reserved, it is informative to
4309 # have a fis entry describing it. This option controls
4310 # creation of such an entry by default in the fis init
4313 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
4314 # This option is not active
4315 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
4316 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
4320 # No user value, uncomment the following line to provide one.
4322 # value_source default
4326 # File to describe RedBoot boot image
4327 # Normally a ROM-startup RedBoot image is first in the
4328 # FLASH, and the system boots using that image. This
4329 # option controls creation of an entry describing it in
4330 # the fis init command. It might be disabled if a
4331 # platform has an immutable boot image of its own, where
4332 # we use a POST-startup RedBoot instead, which performs
4333 # less board initialization.
4335 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
4337 # No user value, uncomment the following line to provide one.
4339 # value_source default
4342 # The following properties are affected by this value
4343 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
4344 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
4347 # File to describe RedBoot POST-compatible image
4348 # This option controls creation of an entry describing a
4349 # POST-startup RedBoot image in the fis init command.
4350 # Not all platforms support POST-startup. A platform
4351 # might have both for testing purposes, where the
4352 # eventual user would substitute their own POST code for
4353 # the initial ROM-startup RedBoot, and then jump to the
4354 # POST-compatible RedBoot immediately following.
4356 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
4358 # No user value, uncomment the following line to provide one.
4360 # value_source default
4361 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
4362 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
4367 # Offset of POST image from FLASH start
4368 # This option specifies the offset for a POST image from
4369 # the start of FLASH. If unset, then the fis entry
4370 # describing the POST image will be placed where
4373 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
4374 # This option is not active
4375 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
4378 # No user value, uncomment the following line to provide one.
4380 # value_source default
4381 # Default value: 0 0
4382 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4383 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
4384 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
4387 # The following properties are affected by this value
4388 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
4389 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
4393 # File to describe RedBoot backup image
4394 # This option controls creation of an entry describing a
4395 # backup RedBoot image in the fis init command.
4396 # Conventionally a RAM-startup RedBoot image is kept
4397 # under this name for use in updating the ROM-based
4398 # RedBoot that boots the board.
4400 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
4402 # No user value, uncomment the following line to provide one.
4404 # value_source default
4408 # Include ARM SIB ID in FIS
4409 # If set, this option will cause the last 5 words of
4410 # the FIS to include the special ID needed for the
4411 # flash to be recognized as a reserved area for RedBoot
4412 # by an ARM BootRom monitor.
4414 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
4416 # No user value, uncomment the following line to provide one.
4418 # value_source default
4422 # Size of FIS directory entry
4423 # The FIS directory is limited to one single flash
4424 # sector. If your flash has tiny sectors, you may wish
4425 # to reduce this value in order to get more slots in
4426 # the FIS directory.
4428 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
4430 # No user value, uncomment the following line to provide one.
4432 # value_source default
4433 # Default value: 256
4437 # Keep RedBoot configuration data in FLASH
4438 # When this option is enabled, RedBoot will keep configuration
4439 # data in a separate block of FLASH memory. This data will
4440 # include such items as the node IP address or startup scripts.
4442 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
4444 # No user value, uncomment the following line to provide one.
4446 # value_source default
4449 # The following properties are affected by this value
4450 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
4451 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4452 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
4453 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4454 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
4455 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4456 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
4457 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
4458 # option CYGFUN_REDBOOT_BOOT_SCRIPT
4459 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4463 # Length of configuration data in FLASH
4464 # This option is used to control the amount of memory and FLASH
4465 # to be used for configuration options (persistent storage).
4467 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
4469 # No user value, uncomment the following line to provide one.
4471 # value_source default
4472 # Default value: 4096
4475 # Merged config data and FIS directory
4476 # If this option is set, then the FIS directory and FLASH
4477 # configuration database will be stored in the same physical
4480 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
4481 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
4482 # CYGOPT_REDBOOT_FIS == 1
4486 # No user value, uncomment the following line to provide one.
4488 # value_source default
4492 # Which block of flash to use
4493 # Which block of flash should hold the configuration
4494 # information. Positive numbers are absolute block numbers.
4495 # Negative block numbers count backwards from the last block.
4496 # eg 2 means block 2, -2 means the last but one block.
4498 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
4500 # No user value, uncomment the following line to provide one.
4502 # value_source default
4506 # Support simple macros/aliases in FLASH
4507 # This option is used to allow support for simple text-based
4508 # macros (aliases). These aliases are kept in the FLASH
4509 # configuration data (persistent storage).
4511 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
4513 # No user value, uncomment the following line to provide one.
4515 # value_source default
4519 # Length of strings in FLASH configuration data
4520 # This option is used to control the amount of memory and FLASH
4521 # to be used for string configuration options (persistent storage).
4523 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
4525 # No user value, uncomment the following line to provide one.
4527 # value_source default
4528 # Default value: 128
4531 # Length of configuration script(s) in FLASH
4532 # This option is used to control the amount of memory and FLASH
4533 # to be used for configuration options (persistent storage).
4535 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
4537 # No user value, uncomment the following line to provide one.
4539 # value_source default
4540 # Default value: 512
4543 # Fallback to read-only FLASH configuration
4544 # This option will cause the configuration information to
4545 # revert to the readonly information stored in the FLASH.
4546 # The option only takes effect after
4547 # 1) the config_ok flag has been set to be true,
4548 # indicating that at one time the copy in RAM was valid;
4550 # 2) the information in RAM has been verified to be invalid
4552 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
4554 # No user value, uncomment the following line to provide one.
4556 # value_source default
4561 # Keep all RedBoot FLASH data blocks locked.
4562 # When this option is enabled, RedBoot will keep configuration
4563 # data and the FIS directory blocks implicitly locked. While
4564 # this is somewhat safer, it does add overhead during updates.
4566 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
4567 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
4568 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 1
4572 # No user value, uncomment the following line to provide one.
4574 # value_source default
4578 # Use CRC checksums on FIS images.
4579 # When this option is enabled, RedBoot will use CRC checksums
4580 # when reading and writing flash images.
4582 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
4584 # No user value, uncomment the following line to provide one.
4586 # value_source default
4590 # ARM FLASH drivers support SIB flash block structure
4591 # This interface is implemented by a flash driver
4592 # to indicate that it supports the ARM SIB flash
4595 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
4596 # No options implement this inferface
4597 # ActiveIf constraint: CYGPKG_HAL_ARM
4598 # CYGPKG_HAL_ARM == current
4601 # This value cannot be modified here.
4605 # The following properties are affected by this value
4606 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
4607 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4610 # Use ARM SIB flash block structure
4611 # This option is used to interpret ARM Flash System information
4614 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
4615 # This option is not active
4616 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
4617 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
4621 # No user value, uncomment the following line to provide one.
4623 # value_source default
4628 # Allow RedBoot to support disks
4629 # If this option is enabled then RedBoot will provide commands
4630 # to load disk files.
4632 cdl_component CYGPKG_REDBOOT_DISK {
4633 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
4634 # CYGINT_HAL_PLF_IF_IDE == 1
4638 # No user value, uncomment the following line to provide one.
4640 # value_source default
4645 # Maximum number of supported disks
4646 # This option controls the number of disks supported by RedBoot.
4648 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
4650 # No user value, uncomment the following line to provide one.
4652 # value_source default
4656 # Maximum number of partitions per disk
4657 # This option controls the maximum number of supported partitions per disk.
4659 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
4661 # No user value, uncomment the following line to provide one.
4663 # value_source default
4667 # Support IDE disks.
4668 # When this option is enabled, RedBoot will support IDE disks.
4670 cdl_component CYGSEM_REDBOOT_DISK_IDE {
4672 # No user value, uncomment the following line to provide one.
4674 # value_source default
4678 # Support Linux second extended filesystems.
4679 # When this option is enabled, RedBoot will support IDE disks.
4681 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
4683 # No user value, uncomment the following line to provide one.
4685 # value_source default
4689 # Support ISO9660 filesystems.
4690 # When this option is enabled, RedBoot will support ISO9660 filesystems.
4692 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
4693 # Calculated value: 0
4700 # doc: ref/persistent-state-flash.html
4701 # This contains options related to RedBoot's boot script
4704 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
4705 # There is no associated value.
4709 # Boot scripting enabled
4710 # This option controls whether RedBoot boot script
4711 # functionality is enabled.
4713 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
4714 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4715 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
4716 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4719 # Calculated value: 1
4724 # Use default RedBoot boot script
4725 # If enabled, this option will tell RedBoot to use the value of
4726 # this option as a default boot script.
4728 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
4730 # No user value, uncomment the following line to provide one.
4732 # value_source default
4733 # Default value: 0 0
4735 # The following properties are affected by this value
4736 # option CYGFUN_REDBOOT_BOOT_SCRIPT
4737 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
4740 # Resolution (in ms) for script timeout value.
4741 # This option controls the resolution of the script timeout.
4742 # The value is specified in milliseconds (ms), thus to have the
4743 # script timeout be defined in terms of tenths of seconds, use 100.
4745 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
4747 # No user value, uncomment the following line to provide one.
4749 # value_source default
4753 # Script default timeout value
4754 # This option is used to set the default timeout for startup
4755 # scripts, when they are enabled.
4757 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
4759 # No user value, uncomment the following line to provide one.
4761 # value_source default
4762 # Default value: 100
4766 # Behave like a ROM monitor
4767 # Enabling this option will allow RedBoot to provide ROM monitor-style
4768 # services to programs which it executes.
4770 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
4771 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
4772 # CYG_HAL_STARTUP == ROM
4773 # CYG_HAL_STARTUP == ROM
4776 # Calculated value: 1
4779 # Requires: CYGSEM_HAL_ROM_MONITOR
4780 # CYGSEM_HAL_ROM_MONITOR == 1
4784 # Allow RedBoot to handle GNUPro application 'syscalls'.
4785 # If this option is enabled then RedBoot will install a syscall handler
4786 # to support debugging of applications based on GNUPro newlib/bsp.
4788 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
4790 # No user value, uncomment the following line to provide one.
4792 # value_source default
4795 # The following properties are affected by this value
4796 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
4797 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4798 # option CYGPKG_HAL_GDB_FILEIO
4799 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
4803 # Support additional syscalls for 'gprof' profiling
4804 # Support additional syscalls to support a periodic callback
4805 # function for histogram-style profiling, and an enquire/set
4807 # The application must use the GNUPro newlib facilities
4810 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
4811 # This option is not active
4812 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4813 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4814 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
4818 # No user value, uncomment the following line to provide one.
4820 # value_source default
4824 # Does the HAL support 'gprof' profiling?
4826 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
4827 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
4828 # This option is not active
4829 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
4831 # This value cannot be modified here.
4835 # The following properties are affected by this value
4836 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
4837 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
4841 # Use a common buffer for Zlib and FIS
4842 # Use a common memory buffer for both the zlib workspace
4843 # and FIS directory operations. This can save a substantial
4844 # amount of RAM, especially when flash sectors are large.
4846 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
4847 # This option is not active
4848 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4849 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 0
4850 # CYGOPT_REDBOOT_FIS == 1
4854 # No user value, uncomment the following line to provide one.
4856 # value_source default
4861 # Size of Zlib/FIS common buffer
4862 # Size of common buffer to allocate. Must be at least the
4863 # size of one flash sector.
4865 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
4866 # This option is not active
4867 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is not active
4868 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
4871 # No user value, uncomment the following line to provide one.
4872 # user_value 0x0000C000
4873 # value_source default
4874 # Default value: 0x0000C000
4875 # Legal values: 0x4000 to 0x80000000
4880 # Redboot for ARM options
4881 # This option lists the target's requirements for a valid Redboot
4884 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
4885 # ActiveIf constraint: CYGPKG_REDBOOT
4886 # CYGPKG_REDBOOT == current
4889 # There is no associated value.
4891 # The following properties are affected by this value
4895 # Provide the exec command in RedBoot
4896 # This option contains requirements for booting linux
4897 # from RedBoot. The component is enabled/disabled from
4900 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
4901 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4902 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
4905 # There is no associated value.
4909 # Physical base address of linux kernel
4910 # This is the physical address of the base of the
4911 # Linux kernel image.
4913 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
4915 user_value 0xa0008000
4917 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4918 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xa0008000
4922 # Default physical base address of linux kernel
4923 # This is the physical address of the base of the
4924 # Linux kernel image. This option gets set by the
4927 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
4929 user_value 0xa0008000
4931 # Default value: 0x00008000
4933 # The following properties are affected by this value
4934 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
4935 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
4938 # Base address of linux kernel parameter tags
4939 # This is the base address of the area of memory used to
4940 # pass parameters to the Linux kernel. This should be chosen
4941 # to avoid overlap with the kernel and any ramdisk image.
4943 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
4945 user_value 0xa0001000
4947 # Default value: 0x00000100
4952 # Redboot for XScale options
4953 # This option lists the target's requirements for a valid Redboot
4956 cdl_component CYGPKG_REDBOOT_XSCALE_OPTIONS {
4957 # ActiveIf constraint: CYGPKG_REDBOOT
4958 # CYGPKG_REDBOOT == current
4961 # There is no associated value.
4964 # Redboot HAL options
4965 # This option lists the target's requirements for a valid Redboot
4968 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
4969 # ActiveIf constraint: CYGPKG_REDBOOT
4970 # CYGPKG_REDBOOT == current
4973 # There is no associated value.
4977 # Build Redboot ROM binary image
4978 # This option enables the conversion of the Redboot ELF
4979 # image to a binary image suitable for ROM programming.
4981 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
4982 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
4983 # CYGBLD_BUILD_REDBOOT == 1
4987 # No user value, uncomment the following line to provide one.
4989 # value_source default
4995 # ISO C and POSIX infrastructure
4996 # eCos supports implementations of ISO C libraries and POSIX
4997 # implementations. This package provides infrastructure used by
4998 # all such implementations.
5000 cdl_package CYGPKG_ISOINFRA {
5001 # Packages cannot be added or removed, nor can their version be changed,
5002 # simply by editing their value. Instead the appropriate configuration
5003 # should be used to perform these actions.
5005 # This value cannot be modified here.
5007 # Current value: 1 current
5009 # The following properties are affected by this value
5010 # package CYGPKG_IO_FLASH
5011 # Requires: CYGPKG_ISOINFRA
5012 # component CYGBLD_BUILD_REDBOOT
5013 # Requires: CYGPKG_ISOINFRA
5014 # package CYGPKG_LIBC_STRING
5015 # Requires: CYGPKG_ISOINFRA
5019 # Startup and termination
5021 cdl_component CYGPKG_ISO_STARTUP {
5022 # There is no associated value.
5026 # main() startup implementations
5027 # Implementations of this interface arrange for a user-supplied
5028 # main() to be called in an ISO compatible environment.
5030 cdl_interface CYGINT_ISO_MAIN_STARTUP {
5031 # No options implement this inferface
5032 # This value cannot be modified here.
5035 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
5036 # CYGINT_ISO_MAIN_STARTUP == 0
5039 # The following properties are affected by this value
5040 # interface CYGINT_ISO_MAIN_STARTUP
5041 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
5044 # environ implementations
5045 # Implementations of this interface provide the environ
5046 # variable required by POSIX.
5048 cdl_interface CYGINT_ISO_ENVIRON {
5049 # No options implement this inferface
5050 # This value cannot be modified here.
5053 # Requires: 1 >= CYGINT_ISO_ENVIRON
5054 # CYGINT_ISO_ENVIRON == 0
5057 # The following properties are affected by this value
5058 # interface CYGINT_ISO_ENVIRON
5059 # Requires: 1 >= CYGINT_ISO_ENVIRON
5065 cdl_component CYGPKG_ISO_CTYPE_H {
5066 # There is no associated value.
5070 # Number of implementations of ctype functions
5072 cdl_interface CYGINT_ISO_CTYPE {
5073 # No options implement this inferface
5074 # This value cannot be modified here.
5077 # Requires: 1 >= CYGINT_ISO_CTYPE
5078 # CYGINT_ISO_CTYPE == 0
5081 # The following properties are affected by this value
5082 # interface CYGINT_ISO_CTYPE
5083 # Requires: 1 >= CYGINT_ISO_CTYPE
5084 # option CYGFUN_LIBC_STRING_BSD_FUNCS
5085 # Requires: CYGINT_ISO_CTYPE
5086 # option CYGPKG_NS_DNS_BUILD
5087 # Requires: CYGINT_ISO_CTYPE
5090 # Ctype implementation header
5092 cdl_option CYGBLD_ISO_CTYPE_HEADER {
5094 # No user value, uncomment the following line to provide one.
5096 # value_source default
5097 # Default value: 0 0
5103 cdl_component CYGPKG_ISO_ERRNO {
5104 # There is no associated value.
5108 # Number of implementations of error codes
5110 cdl_interface CYGINT_ISO_ERRNO_CODES {
5111 # No options implement this inferface
5112 # This value cannot be modified here.
5115 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
5116 # CYGINT_ISO_ERRNO_CODES == 0
5119 # The following properties are affected by this value
5120 # interface CYGINT_ISO_ERRNO_CODES
5121 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
5124 # Error codes implementation header
5126 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
5128 # No user value, uncomment the following line to provide one.
5130 # value_source default
5131 # Default value: 0 0
5134 # Number of implementations of errno variable
5136 cdl_interface CYGINT_ISO_ERRNO {
5137 # No options implement this inferface
5138 # This value cannot be modified here.
5141 # Requires: 1 >= CYGINT_ISO_ERRNO
5142 # CYGINT_ISO_ERRNO == 0
5145 # The following properties are affected by this value
5146 # interface CYGINT_ISO_ERRNO
5147 # Requires: 1 >= CYGINT_ISO_ERRNO
5150 # errno variable implementation header
5152 cdl_option CYGBLD_ISO_ERRNO_HEADER {
5154 # No user value, uncomment the following line to provide one.
5156 # value_source default
5157 # Default value: 0 0
5161 # Locale-related functions
5163 cdl_component CYGPKG_ISO_LOCALE {
5164 # There is no associated value.
5168 # Number of implementations of locale functions
5170 cdl_interface CYGINT_ISO_LOCALE {
5171 # No options implement this inferface
5172 # This value cannot be modified here.
5175 # Requires: 1 >= CYGINT_ISO_LOCALE
5176 # CYGINT_ISO_LOCALE == 0
5179 # The following properties are affected by this value
5180 # interface CYGINT_ISO_LOCALE
5181 # Requires: 1 >= CYGINT_ISO_LOCALE
5184 # Locale implementation header
5186 cdl_option CYGBLD_ISO_LOCALE_HEADER {
5188 # No user value, uncomment the following line to provide one.
5190 # value_source default
5191 # Default value: 0 0
5195 # Standard I/O-related functionality
5197 cdl_component CYGPKG_ISO_STDIO {
5198 # There is no associated value.
5202 # Number of implementations of stdio file types
5204 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
5205 # No options implement this inferface
5206 # This value cannot be modified here.
5208 # Current value: 0 0
5209 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
5210 # CYGINT_ISO_STDIO_FILETYPES == 0
5213 # The following properties are affected by this value
5214 # interface CYGINT_ISO_STDIO_FILETYPES
5215 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
5218 # Stdio file types implementation header
5220 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
5222 # No user value, uncomment the following line to provide one.
5224 # value_source default
5225 # Default value: 0 0
5228 # Stdio standard streams implementations
5230 cdl_interface CYGINT_ISO_STDIO_STREAMS {
5231 # No options implement this inferface
5232 # This value cannot be modified here.
5234 # Current value: 0 0
5235 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
5236 # CYGINT_ISO_STDIO_STREAMS == 0
5239 # The following properties are affected by this value
5240 # interface CYGINT_ISO_STDIO_STREAMS
5241 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
5244 # Stdio standard streams implementation header
5245 # This header file must define stdin, stdout
5248 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
5250 # No user value, uncomment the following line to provide one.
5252 # value_source default
5253 # Default value: 0 0
5256 # Number of implementations of stdio file operations
5258 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
5259 # No options implement this inferface
5260 # This value cannot be modified here.
5262 # Current value: 0 0
5263 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
5264 # CYGINT_ISO_STDIO_FILEOPS == 0
5267 # The following properties are affected by this value
5268 # interface CYGINT_ISO_STDIO_FILEOPS
5269 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
5272 # Stdio file operations implementation header
5273 # This header controls the file system operations on a file
5274 # such as remove(), rename(), tmpfile(), tmpnam() and associated
5277 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
5279 # No user value, uncomment the following line to provide one.
5281 # value_source default
5282 # Default value: 0 0
5285 # Number of implementations of stdio file access functionals
5287 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
5288 # No options implement this inferface
5289 # This value cannot be modified here.
5291 # Current value: 0 0
5292 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
5293 # CYGINT_ISO_STDIO_FILEACCESS == 0
5296 # The following properties are affected by this value
5297 # interface CYGINT_ISO_STDIO_FILEACCESS
5298 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
5301 # Stdio file access implementation header
5302 # This header controls the file access operations
5303 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
5304 # setvbuf(), and associated constants.
5306 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
5308 # No user value, uncomment the following line to provide one.
5310 # value_source default
5311 # Default value: 0 0
5314 # Number of implementations of stdio formatted I/O
5316 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
5317 # No options implement this inferface
5318 # This value cannot be modified here.
5320 # Current value: 0 0
5321 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
5322 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
5325 # The following properties are affected by this value
5326 # interface CYGINT_ISO_STDIO_FORMATTED_IO
5327 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
5330 # Stdio formatted I/O implementation header
5332 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
5334 # No user value, uncomment the following line to provide one.
5336 # value_source default
5337 # Default value: 0 0
5340 # Number of implementations of stdio character I/O
5342 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
5343 # No options implement this inferface
5344 # This value cannot be modified here.
5346 # Current value: 0 0
5347 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
5348 # CYGINT_ISO_STDIO_CHAR_IO == 0
5351 # The following properties are affected by this value
5352 # interface CYGINT_ISO_STDIO_CHAR_IO
5353 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
5356 # Stdio character I/O implementation header
5358 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
5360 # No user value, uncomment the following line to provide one.
5362 # value_source default
5363 # Default value: 0 0
5366 # Number of implementations of stdio direct I/O
5368 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
5369 # No options implement this inferface
5370 # This value cannot be modified here.
5372 # Current value: 0 0
5373 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
5374 # CYGINT_ISO_STDIO_DIRECT_IO == 0
5377 # The following properties are affected by this value
5378 # interface CYGINT_ISO_STDIO_DIRECT_IO
5379 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
5382 # Stdio direct I/O implementation header
5384 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
5386 # No user value, uncomment the following line to provide one.
5388 # value_source default
5389 # Default value: 0 0
5392 # Number of implementations of stdio file positioning
5394 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
5395 # No options implement this inferface
5396 # This value cannot be modified here.
5398 # Current value: 0 0
5399 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
5400 # CYGINT_ISO_STDIO_FILEPOS == 0
5403 # The following properties are affected by this value
5404 # interface CYGINT_ISO_STDIO_FILEPOS
5405 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
5408 # Stdio file positioning implementation header
5410 cdl_option CYGBLD_ISO_STDIO_FILEPOS {
5412 # No user value, uncomment the following line to provide one.
5414 # value_source default
5415 # Default value: 0 0
5418 # Number of implementations of stdio error handling
5420 cdl_interface CYGINT_ISO_STDIO_ERROR {
5421 # No options implement this inferface
5422 # This value cannot be modified here.
5424 # Current value: 0 0
5425 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
5426 # CYGINT_ISO_STDIO_ERROR == 0
5429 # The following properties are affected by this value
5430 # interface CYGINT_ISO_STDIO_ERROR
5431 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
5434 # Stdio error handling implementation header
5436 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
5438 # No user value, uncomment the following line to provide one.
5440 # value_source default
5441 # Default value: 0 0
5444 # POSIX fd-related function implementations
5446 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
5447 # No options implement this inferface
5448 # This value cannot be modified here.
5450 # Current value: 0 0
5451 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
5452 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
5455 # The following properties are affected by this value
5456 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
5457 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
5460 # POSIX fd-related function implementation header
5462 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
5464 # No user value, uncomment the following line to provide one.
5466 # value_source default
5467 # Default value: 0 0
5471 # Standard general utility functions
5473 cdl_component CYGPKG_ISO_STDLIB {
5474 # There is no associated value.
5478 # String conversion function implementations
5480 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
5481 # No options implement this inferface
5482 # This value cannot be modified here.
5485 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5486 # CYGINT_ISO_STDLIB_STRCONV == 0
5489 # The following properties are affected by this value
5490 # interface CYGINT_ISO_STDLIB_STRCONV
5491 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
5494 # String conversion function implementation header
5496 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
5498 # No user value, uncomment the following line to provide one.
5500 # value_source default
5501 # Default value: 0 0
5504 # String to FP conversion function implementations
5506 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
5507 # No options implement this inferface
5508 # This value cannot be modified here.
5511 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5512 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
5515 # The following properties are affected by this value
5516 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
5517 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
5520 # String to FP conversion function implementation header
5522 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
5524 # No user value, uncomment the following line to provide one.
5526 # value_source default
5527 # Default value: 0 0
5530 # Random number generator implementations
5532 cdl_interface CYGINT_ISO_RAND {
5533 # No options implement this inferface
5534 # This value cannot be modified here.
5537 # Requires: 1 >= CYGINT_ISO_RAND
5538 # CYGINT_ISO_RAND == 0
5541 # The following properties are affected by this value
5542 # interface CYGINT_ISO_RAND
5543 # Requires: 1 >= CYGINT_ISO_RAND
5546 # Random number generator implementation header
5548 cdl_option CYGBLD_ISO_RAND_HEADER {
5550 # No user value, uncomment the following line to provide one.
5552 # value_source default
5553 # Default value: 0 0
5556 # Malloc implementations
5558 cdl_interface CYGINT_ISO_MALLOC {
5559 # No options implement this inferface
5560 # This value cannot be modified here.
5563 # Requires: 1 >= CYGINT_ISO_MALLOC
5564 # CYGINT_ISO_MALLOC == 0
5567 # The following properties are affected by this value
5568 # interface CYGINT_ISO_MALLOC
5569 # Requires: 1 >= CYGINT_ISO_MALLOC
5570 # option CYGPKG_NS_DNS_BUILD
5571 # Requires: CYGINT_ISO_MALLOC
5574 # Malloc implementation header
5576 cdl_option CYGBLD_ISO_MALLOC_HEADER {
5578 # No user value, uncomment the following line to provide one.
5580 # value_source default
5581 # Default value: 0 0
5584 # Mallinfo() implementations
5586 cdl_interface CYGINT_ISO_MALLINFO {
5587 # No options implement this inferface
5588 # This value cannot be modified here.
5591 # Requires: 1 >= CYGINT_ISO_MALLINFO
5592 # CYGINT_ISO_MALLINFO == 0
5595 # The following properties are affected by this value
5596 # interface CYGINT_ISO_MALLINFO
5597 # Requires: 1 >= CYGINT_ISO_MALLINFO
5600 # Mallinfo() implementation header
5602 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
5604 # No user value, uncomment the following line to provide one.
5606 # value_source default
5607 # Default value: 0 0
5610 # Program exit functionality implementations
5612 cdl_interface CYGINT_ISO_EXIT {
5613 # No options implement this inferface
5614 # This value cannot be modified here.
5617 # Requires: 1 >= CYGINT_ISO_EXIT
5618 # CYGINT_ISO_EXIT == 0
5621 # The following properties are affected by this value
5622 # interface CYGINT_ISO_EXIT
5623 # Requires: 1 >= CYGINT_ISO_EXIT
5624 # option CYGFUN_INFRA_DUMMY_ABORT
5625 # Requires: !CYGINT_ISO_EXIT
5626 # option CYGFUN_INFRA_DUMMY_ABORT
5627 # DefaultValue: CYGINT_ISO_EXIT == 0
5630 # Program exit functionality implementation header
5632 cdl_option CYGBLD_ISO_EXIT_HEADER {
5634 # No user value, uncomment the following line to provide one.
5636 # value_source default
5637 # Default value: 0 0
5640 # Program environment implementations
5642 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
5643 # No options implement this inferface
5644 # This value cannot be modified here.
5647 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5648 # CYGINT_ISO_STDLIB_ENVIRON == 0
5651 # The following properties are affected by this value
5652 # interface CYGINT_ISO_STDLIB_ENVIRON
5653 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
5656 # Program environment implementation header
5658 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
5660 # No user value, uncomment the following line to provide one.
5662 # value_source default
5663 # Default value: 0 0
5666 # system() implementations
5668 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
5669 # No options implement this inferface
5670 # This value cannot be modified here.
5673 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5674 # CYGINT_ISO_STDLIB_SYSTEM == 0
5677 # The following properties are affected by this value
5678 # interface CYGINT_ISO_STDLIB_SYSTEM
5679 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
5682 # system() implementation header
5684 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
5686 # No user value, uncomment the following line to provide one.
5688 # value_source default
5689 # Default value: 0 0
5692 # bsearch() implementations
5694 cdl_interface CYGINT_ISO_BSEARCH {
5695 # No options implement this inferface
5696 # This value cannot be modified here.
5699 # Requires: 1 >= CYGINT_ISO_BSEARCH
5700 # CYGINT_ISO_BSEARCH == 0
5703 # The following properties are affected by this value
5704 # interface CYGINT_ISO_BSEARCH
5705 # Requires: 1 >= CYGINT_ISO_BSEARCH
5708 # bsearch() implementation header
5710 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
5712 # No user value, uncomment the following line to provide one.
5714 # value_source default
5715 # Default value: 0 0
5718 # qsort() implementations
5720 cdl_interface CYGINT_ISO_QSORT {
5721 # No options implement this inferface
5722 # This value cannot be modified here.
5725 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
5726 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
5730 # qsort() implementation header
5732 cdl_option CYGBLD_ISO_QSORT_HEADER {
5734 # No user value, uncomment the following line to provide one.
5736 # value_source default
5737 # Default value: 0 0
5740 # abs()/labs() implementations
5742 cdl_interface CYGINT_ISO_ABS {
5743 # No options implement this inferface
5744 # This value cannot be modified here.
5747 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
5748 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
5752 # abs()/labs() implementation header
5754 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
5756 # No user value, uncomment the following line to provide one.
5758 # value_source default
5759 # Default value: 0 0
5762 # div()/ldiv() implementations
5764 cdl_interface CYGINT_ISO_DIV {
5765 # No options implement this inferface
5766 # This value cannot be modified here.
5769 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
5770 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
5774 # div()/ldiv() implementation header
5776 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
5778 # No user value, uncomment the following line to provide one.
5780 # value_source default
5781 # Default value: 0 0
5784 # Header defining the implementation's MB_CUR_MAX
5786 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
5788 # No user value, uncomment the following line to provide one.
5790 # value_source default
5791 # Default value: 0 0
5794 # Multibyte character implementations
5796 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
5797 # No options implement this inferface
5798 # This value cannot be modified here.
5801 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5802 # CYGINT_ISO_STDLIB_MULTIBYTE == 0
5805 # The following properties are affected by this value
5806 # interface CYGINT_ISO_STDLIB_MULTIBYTE
5807 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
5810 # Multibyte character implementation header
5812 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
5814 # No user value, uncomment the following line to provide one.
5816 # value_source default
5817 # Default value: 0 0
5823 cdl_component CYGPKG_ISO_STRING {
5824 # There is no associated value.
5828 # Number of implementations of strerror() function
5830 cdl_interface CYGINT_ISO_STRERROR {
5831 # No options implement this inferface
5832 # This value cannot be modified here.
5834 # Current value: 0 0
5835 # Requires: 1 >= CYGINT_ISO_STRERROR
5836 # CYGINT_ISO_STRERROR == 0
5839 # The following properties are affected by this value
5840 # interface CYGINT_ISO_STRERROR
5841 # Requires: 1 >= CYGINT_ISO_STRERROR
5844 # strerror() implementation header
5846 cdl_option CYGBLD_ISO_STRERROR_HEADER {
5848 # No user value, uncomment the following line to provide one.
5850 # value_source default
5851 # Default value: 0 0
5854 # memcpy() implementation header
5856 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
5858 # No user value, uncomment the following line to provide one.
5860 # value_source default
5861 # Default value: 0 0
5864 # memset() implementation header
5866 cdl_option CYGBLD_ISO_MEMSET_HEADER {
5868 # No user value, uncomment the following line to provide one.
5870 # value_source default
5871 # Default value: 0 0
5874 # Number of implementations of strtok_r() function
5876 cdl_interface CYGINT_ISO_STRTOK_R {
5877 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5878 # This value cannot be modified here.
5880 # Current value: 1 1
5881 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5882 # CYGINT_ISO_STRTOK_R == 1
5885 # The following properties are affected by this value
5886 # interface CYGINT_ISO_STRTOK_R
5887 # Requires: 1 >= CYGINT_ISO_STRTOK_R
5890 # strtok_r() implementation header
5892 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
5894 # No user value, uncomment the following line to provide one.
5896 # The inferred value should not be edited directly.
5897 inferred_value 1 <cyg/libc/string/string.h>
5898 # value_source inferred
5899 # Default value: 0 0
5901 # The following properties are affected by this value
5902 # package CYGPKG_LIBC_STRING
5903 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
5906 # Number of implementations of locale-specific string functions
5907 # This covers locale-dependent string functions such as strcoll()
5910 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
5911 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5912 # This value cannot be modified here.
5914 # Current value: 1 1
5915 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5916 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
5919 # The following properties are affected by this value
5920 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
5921 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
5924 # Locale-specific string functions' implementation header
5925 # This covers locale-dependent string functions such as strcoll()
5928 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
5930 # No user value, uncomment the following line to provide one.
5932 # The inferred value should not be edited directly.
5933 inferred_value 1 <cyg/libc/string/string.h>
5934 # value_source inferred
5935 # Default value: 0 0
5937 # The following properties are affected by this value
5938 # package CYGPKG_LIBC_STRING
5939 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
5942 # Number of implementations of BSD string functions
5944 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
5945 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
5946 # This value cannot be modified here.
5948 # Current value: 0 0
5949 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5950 # CYGINT_ISO_STRING_BSD_FUNCS == 0
5953 # The following properties are affected by this value
5954 # interface CYGINT_ISO_STRING_BSD_FUNCS
5955 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
5958 # BSD string functions' implementation header
5960 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
5962 # No user value, uncomment the following line to provide one.
5964 # The inferred value should not be edited directly.
5965 inferred_value 1 <cyg/libc/string/bsdstring.h>
5966 # value_source inferred
5967 # Default value: 0 0
5969 # The following properties are affected by this value
5970 # option CYGFUN_LIBC_STRING_BSD_FUNCS
5971 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
5974 # Number of implementations of other mem*() functions
5976 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
5977 # Implemented by CYGPKG_LIBC_STRING, active, enabled
5978 # This value cannot be modified here.
5980 # Current value: 1 1
5981 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5982 # CYGINT_ISO_STRING_MEMFUNCS == 1
5985 # The following properties are affected by this value
5986 # interface CYGINT_ISO_STRING_MEMFUNCS
5987 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
5988 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
5989 # Requires: CYGINT_ISO_STRING_MEMFUNCS
5990 # component CYGBLD_BUILD_REDBOOT
5991 # Requires: CYGINT_ISO_STRING_MEMFUNCS
5994 # Other mem*() functions' implementation header
5996 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
5998 # No user value, uncomment the following line to provide one.
6000 # The inferred value should not be edited directly.
6001 inferred_value 1 <cyg/libc/string/string.h>
6002 # value_source inferred
6003 # Default value: 0 0
6005 # The following properties are affected by this value
6006 # package CYGPKG_LIBC_STRING
6007 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
6010 # Number of implementations of other ISO C str*() functions
6011 # This covers the other str*() functions defined by ISO C.
6013 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
6014 # Implemented by CYGPKG_LIBC_STRING, active, enabled
6015 # This value cannot be modified here.
6017 # Current value: 1 1
6018 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
6019 # CYGINT_ISO_STRING_STRFUNCS == 1
6022 # The following properties are affected by this value
6023 # interface CYGINT_ISO_STRING_STRFUNCS
6024 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
6025 # package CYGPKG_IO_FLASH
6026 # Requires: CYGINT_ISO_STRING_STRFUNCS
6027 # component CYGPKG_IO_ETH_DRIVERS_NET
6028 # Requires: CYGINT_ISO_STRING_STRFUNCS
6029 # option CYGFUN_INFRA_DUMMY_STRLEN
6030 # Requires: !CYGINT_ISO_STRING_STRFUNCS
6031 # option CYGFUN_INFRA_DUMMY_STRLEN
6032 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
6033 # component CYGBLD_BUILD_REDBOOT
6034 # Requires: CYGINT_ISO_STRING_STRFUNCS
6035 # option CYGPKG_NS_DNS_BUILD
6036 # Requires: CYGINT_ISO_STRING_STRFUNCS
6039 # Other ISO C str*() functions' implementation header
6040 # This covers the other str*() functions defined by ISO C.
6042 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
6044 # No user value, uncomment the following line to provide one.
6046 # The inferred value should not be edited directly.
6047 inferred_value 1 <cyg/libc/string/string.h>
6048 # value_source inferred
6049 # Default value: 0 0
6051 # The following properties are affected by this value
6052 # package CYGPKG_LIBC_STRING
6053 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
6057 # Clock and time functionality
6059 cdl_component CYGPKG_ISO_TIME {
6060 # There is no associated value.
6064 # time_t implementation header
6066 cdl_option CYGBLD_ISO_TIME_T_HEADER {
6068 # No user value, uncomment the following line to provide one.
6070 # value_source default
6071 # Default value: 0 0
6074 # clock_t implementation header
6076 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
6078 # No user value, uncomment the following line to provide one.
6080 # value_source default
6081 # Default value: 0 0
6084 # struct timeval implementation header
6086 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
6088 # No user value, uncomment the following line to provide one.
6090 # value_source default
6091 # Default value: 0 0
6094 # Number of implementations of POSIX timer types
6096 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
6097 # No options implement this inferface
6098 # This value cannot be modified here.
6100 # Current value: 0 0
6101 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
6102 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
6105 # The following properties are affected by this value
6106 # interface CYGINT_ISO_POSIX_TIMER_TYPES
6107 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
6110 # POSIX timer types implementation header
6112 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
6114 # No user value, uncomment the following line to provide one.
6116 # value_source default
6117 # Default value: 0 0
6120 # Number of implementations of POSIX clock types
6122 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
6123 # No options implement this inferface
6124 # This value cannot be modified here.
6126 # Current value: 0 0
6127 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
6128 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
6131 # The following properties are affected by this value
6132 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
6133 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
6136 # POSIX clock types implementation header
6138 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
6140 # No user value, uncomment the following line to provide one.
6142 # value_source default
6143 # Default value: 0 0
6146 # Number of implementations of ISO C types
6148 cdl_interface CYGINT_ISO_C_TIME_TYPES {
6149 # No options implement this inferface
6150 # This value cannot be modified here.
6152 # Current value: 0 0
6153 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
6154 # CYGINT_ISO_C_TIME_TYPES == 0
6157 # The following properties are affected by this value
6158 # interface CYGINT_ISO_C_TIME_TYPES
6159 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
6162 # ISO C time types implementation header
6164 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
6166 # No user value, uncomment the following line to provide one.
6168 # value_source default
6169 # Default value: 0 0
6172 # Number of implementations of POSIX timers
6174 cdl_interface CYGINT_ISO_POSIX_TIMERS {
6175 # No options implement this inferface
6176 # This value cannot be modified here.
6178 # Current value: 0 0
6179 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
6180 # CYGINT_ISO_POSIX_TIMERS == 0
6183 # The following properties are affected by this value
6184 # interface CYGINT_ISO_POSIX_TIMERS
6185 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
6188 # POSIX timer implementation header
6190 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
6192 # No user value, uncomment the following line to provide one.
6194 # value_source default
6195 # Default value: 0 0
6198 # Number of implementations of POSIX clocks
6200 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
6201 # No options implement this inferface
6202 # This value cannot be modified here.
6204 # Current value: 0 0
6205 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
6206 # CYGINT_ISO_POSIX_CLOCKS == 0
6209 # The following properties are affected by this value
6210 # interface CYGINT_ISO_POSIX_CLOCKS
6211 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
6214 # POSIX clocks implementation header
6216 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
6218 # No user value, uncomment the following line to provide one.
6220 # value_source default
6221 # Default value: 0 0
6224 # Number of implementations of ISO C clock functions
6226 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
6227 # No options implement this inferface
6228 # This value cannot be modified here.
6230 # Current value: 0 0
6231 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
6232 # CYGINT_ISO_C_CLOCK_FUNCS == 0
6235 # The following properties are affected by this value
6236 # interface CYGINT_ISO_C_CLOCK_FUNCS
6237 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
6240 # ISO C clock functions' implementation header
6242 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
6244 # No user value, uncomment the following line to provide one.
6246 # value_source default
6247 # Default value: 0 0
6250 # Number of implementations of tzset() function
6252 cdl_interface CYGINT_ISO_TZSET {
6253 # No options implement this inferface
6254 # This value cannot be modified here.
6256 # Current value: 0 0
6257 # Requires: 1 >= CYGINT_ISO_TZSET
6258 # CYGINT_ISO_TZSET == 0
6261 # The following properties are affected by this value
6262 # interface CYGINT_ISO_TZSET
6263 # Requires: 1 >= CYGINT_ISO_TZSET
6266 # tzset() implementation header
6268 cdl_option CYGBLD_ISO_TZSET_HEADER {
6270 # No user value, uncomment the following line to provide one.
6272 # value_source default
6273 # Default value: 0 0
6277 # Signal functionality
6279 cdl_component CYGPKG_ISO_SIGNAL {
6280 # There is no associated value.
6284 # Number of implementations of signal numbers
6286 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
6287 # No options implement this inferface
6288 # This value cannot be modified here.
6291 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
6292 # CYGINT_ISO_SIGNAL_NUMBERS == 0
6295 # The following properties are affected by this value
6296 # interface CYGINT_ISO_SIGNAL_NUMBERS
6297 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
6300 # Signal numbering implementation header
6301 # This header provides the mapping of signal
6302 # names (e.g. SIGBUS) to numbers.
6304 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
6306 # No user value, uncomment the following line to provide one.
6308 # value_source default
6309 # Default value: 0 0
6312 # Number of signal implementations
6314 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
6315 # No options implement this inferface
6316 # This value cannot be modified here.
6319 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
6320 # CYGINT_ISO_SIGNAL_IMPL == 0
6323 # The following properties are affected by this value
6324 # interface CYGINT_ISO_SIGNAL_IMPL
6325 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
6328 # Signals implementation header
6330 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
6332 # No user value, uncomment the following line to provide one.
6334 # value_source default
6335 # Default value: 0 0
6338 # POSIX real time signals feature test macro
6339 # This defines the POSIX feature test macro
6340 # that indicates that the POSIX real time signals
6343 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
6344 # No options implement this inferface
6345 # This value cannot be modified here.
6348 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
6349 # CYGINT_POSIX_REALTIME_SIGNALS == 0
6352 # The following properties are affected by this value
6353 # interface CYGINT_POSIX_REALTIME_SIGNALS
6354 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
6358 # Non-local jumps functionality
6360 cdl_component CYGPKG_ISO_SETJMP {
6361 # There is no associated value.
6365 # setjmp() / longjmp() implementations
6367 cdl_interface CYGINT_ISO_SETJMP {
6368 # No options implement this inferface
6369 # This value cannot be modified here.
6372 # Requires: 1 >= CYGINT_ISO_SETJMP
6373 # CYGINT_ISO_SETJMP == 0
6376 # The following properties are affected by this value
6377 # interface CYGINT_ISO_SETJMP
6378 # Requires: 1 >= CYGINT_ISO_SETJMP
6381 # setjmp() / longjmp() implementation header
6383 cdl_option CYGBLD_ISO_SETJMP_HEADER {
6385 # No user value, uncomment the following line to provide one.
6387 # value_source default
6388 # Default value: 0 0
6391 # sigsetjmp() / siglongjmp() implementations
6393 cdl_interface CYGINT_ISO_SIGSETJMP {
6394 # No options implement this inferface
6395 # This value cannot be modified here.
6398 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
6399 # CYGINT_ISO_SIGSETJMP == 0
6402 # The following properties are affected by this value
6403 # interface CYGINT_ISO_SIGSETJMP
6404 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
6407 # sigsetjmp() / siglongjmp() implementation header
6409 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
6411 # No user value, uncomment the following line to provide one.
6413 # value_source default
6414 # Default value: 0 0
6418 # Assertions implementation header
6420 cdl_option CYGBLD_ISO_ASSERT_HEADER {
6422 # No user value, uncomment the following line to provide one.
6424 # value_source default
6425 # Default value: 0 0
6428 # POSIX file control
6429 # This covers the POSIX file control definitions,
6430 # normally found in <fcntl.h>
6432 cdl_component CYGPKG_ISO_POSIX_FCNTL {
6433 # There is no associated value.
6437 # POSIX open flags implementation header
6439 cdl_option CYGBLD_ISO_OFLAG_HEADER {
6441 # No user value, uncomment the following line to provide one.
6443 # value_source default
6444 # Default value: 0 0
6447 # POSIX fcntl() implementations
6449 cdl_interface CYGINT_ISO_FCNTL {
6450 # No options implement this inferface
6451 # This value cannot be modified here.
6454 # Requires: 1 >= CYGINT_ISO_FCNTL
6455 # CYGINT_ISO_FCNTL == 0
6458 # The following properties are affected by this value
6459 # interface CYGINT_ISO_FCNTL
6460 # Requires: 1 >= CYGINT_ISO_FCNTL
6463 # POSIX fcntl() implementation header
6465 cdl_option CYGBLD_ISO_FCNTL_HEADER {
6467 # No user value, uncomment the following line to provide one.
6469 # value_source default
6470 # Default value: 0 0
6473 # POSIX file open implementations
6475 cdl_interface CYGINT_ISO_OPEN {
6476 # No options implement this inferface
6477 # This value cannot be modified here.
6480 # Requires: 1 >= CYGINT_ISO_OPEN
6481 # CYGINT_ISO_OPEN == 0
6484 # The following properties are affected by this value
6485 # interface CYGINT_ISO_OPEN
6486 # Requires: 1 >= CYGINT_ISO_OPEN
6489 # POSIX file open implementation header
6491 cdl_option CYGBLD_ISO_OPEN_HEADER {
6493 # No user value, uncomment the following line to provide one.
6495 # value_source default
6496 # Default value: 0 0
6500 # <sys/stat.h> definitions implementation header
6502 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
6504 # No user value, uncomment the following line to provide one.
6506 # value_source default
6507 # Default value: 0 0
6510 # POSIX directory reading implementation
6512 cdl_interface CYGINT_ISO_DIRENT {
6513 # No options implement this inferface
6514 # This value cannot be modified here.
6517 # Requires: 1 >= CYGINT_ISO_DIRENT
6518 # CYGINT_ISO_DIRENT == 0
6521 # The following properties are affected by this value
6522 # interface CYGINT_ISO_DIRENT
6523 # Requires: 1 >= CYGINT_ISO_DIRENT
6526 # <dirent.h> definitions implementation header
6528 cdl_option CYGBLD_ISO_DIRENT_HEADER {
6530 # No user value, uncomment the following line to provide one.
6532 # value_source default
6533 # Default value: 0 0
6536 # POSIX <sys/types.h> contents
6537 # This covers the types required by POSIX to be in
6540 cdl_component CYGPKG_ISO_POSIX_TYPES {
6541 # There is no associated value.
6545 # POSIX thread types implementations
6547 cdl_interface CYGINT_ISO_PTHREADTYPES {
6548 # No options implement this inferface
6549 # This value cannot be modified here.
6552 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6553 # CYGINT_ISO_PTHREADTYPES == 0
6556 # The following properties are affected by this value
6557 # interface CYGINT_ISO_PTHREADTYPES
6558 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6559 # interface CYGINT_ISO_PMUTEXTYPES
6560 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6563 # POSIX thread types implementation header
6565 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
6567 # No user value, uncomment the following line to provide one.
6569 # value_source default
6570 # Default value: 0 0
6573 # POSIX mutex types implementations
6575 cdl_interface CYGINT_ISO_PMUTEXTYPES {
6576 # No options implement this inferface
6577 # This value cannot be modified here.
6580 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
6581 # CYGINT_ISO_PTHREADTYPES == 0
6585 # POSIX mutex types implementation header
6587 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
6589 # No user value, uncomment the following line to provide one.
6591 # value_source default
6592 # Default value: 0 0
6595 # ssize_t implementation header
6597 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
6599 # No user value, uncomment the following line to provide one.
6601 # value_source default
6602 # Default value: 0 0
6605 # Filesystem types implementation header
6607 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
6609 # No user value, uncomment the following line to provide one.
6611 # value_source default
6612 # Default value: 0 0
6615 # gid_t, pid_t, uid_t implementation header
6617 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
6619 # No user value, uncomment the following line to provide one.
6621 # value_source default
6622 # Default value: 0 0
6626 # Non-POSIX <sys/types.h> contents
6627 # This covers the extra types required by non-POSIX
6628 # packages to be in <sys/types.h>. These would normally
6629 # only be visible if _POSIX_SOURCE is not defined.
6631 cdl_component CYGPKG_ISO_EXTRA_TYPES {
6632 # There is no associated value.
6636 # BSD compatible types
6638 cdl_interface CYGINT_ISO_BSDTYPES {
6639 # No options implement this inferface
6640 # This value cannot be modified here.
6643 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6644 # CYGINT_ISO_BSDTYPES == 0
6647 # The following properties are affected by this value
6648 # interface CYGINT_ISO_BSDTYPES
6649 # Requires: 1 >= CYGINT_ISO_BSDTYPES
6654 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
6656 # No user value, uncomment the following line to provide one.
6658 # value_source default
6659 # Default value: 0 0
6665 cdl_component CYGPKG_ISO_UTSNAME {
6666 # There is no associated value.
6672 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
6674 # No user value, uncomment the following line to provide one.
6676 # value_source default
6677 # Default value: 0 0
6683 cdl_component CYGPKG_ISO_SCHED {
6684 # There is no associated value.
6688 # POSIX scheduler implementations
6690 cdl_interface CYGINT_ISO_SCHED_IMPL {
6691 # No options implement this inferface
6692 # This value cannot be modified here.
6695 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6696 # CYGINT_ISO_SCHED_IMPL == 0
6699 # The following properties are affected by this value
6700 # interface CYGINT_ISO_SCHED_IMPL
6701 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
6704 # POSIX scheduler implementation header
6706 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
6708 # No user value, uncomment the following line to provide one.
6710 # value_source default
6711 # Default value: 0 0
6717 cdl_component CYGPKG_ISO_SEMAPHORES {
6718 # There is no associated value.
6722 # POSIX semaphore implementations
6724 cdl_interface CYGINT_ISO_SEMAPHORES {
6725 # No options implement this inferface
6726 # This value cannot be modified here.
6729 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6730 # CYGINT_ISO_SEMAPHORES == 0
6733 # The following properties are affected by this value
6734 # interface CYGINT_ISO_SEMAPHORES
6735 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
6738 # POSIX semaphore implementation header
6740 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
6742 # No user value, uncomment the following line to provide one.
6744 # value_source default
6745 # Default value: 0 0
6749 # POSIX message queues
6751 cdl_component CYGPKG_ISO_MQUEUE {
6752 # There is no associated value.
6758 cdl_interface CYGINT_ISO_MQUEUE {
6759 # No options implement this inferface
6760 # This value cannot be modified here.
6763 # Requires: 1 >= CYGINT_ISO_MQUEUE
6764 # CYGINT_ISO_MQUEUE == 0
6767 # The following properties are affected by this value
6768 # interface CYGINT_ISO_MQUEUE
6769 # Requires: 1 >= CYGINT_ISO_MQUEUE
6770 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
6771 # ActiveIf: CYGINT_ISO_MQUEUE
6772 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
6773 # ActiveIf: CYGINT_ISO_MQUEUE
6776 # Implementation header
6778 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
6780 # No user value, uncomment the following line to provide one.
6782 # value_source default
6783 # Default value: 0 0
6786 # Maximum number of open message queues
6788 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
6789 # This option is not active
6790 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6791 # CYGINT_ISO_MQUEUE == 0
6795 # No user value, uncomment the following line to provide one.
6797 # value_source default
6798 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
6799 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6800 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
6804 # Maximum number of message priorities
6806 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
6807 # This option is not active
6808 # ActiveIf constraint: CYGINT_ISO_MQUEUE
6809 # CYGINT_ISO_MQUEUE == 0
6813 # No user value, uncomment the following line to provide one.
6814 # user_value 1 65535
6815 # value_source default
6816 # Default value: 1 65535
6822 cdl_component CYGPKG_ISO_PTHREAD {
6823 # There is no associated value.
6827 # POSIX pthread implementations
6829 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
6830 # No options implement this inferface
6831 # This value cannot be modified here.
6833 # Current value: 0 0
6834 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6835 # CYGINT_ISO_PTHREAD_IMPL == 0
6838 # The following properties are affected by this value
6839 # interface CYGINT_ISO_PTHREAD_IMPL
6840 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
6843 # POSIX pthread implementation header
6845 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
6847 # No user value, uncomment the following line to provide one.
6849 # value_source default
6850 # Default value: 0 0
6853 # POSIX mutex/cond var implementations
6855 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
6856 # No options implement this inferface
6857 # This value cannot be modified here.
6859 # Current value: 0 0
6860 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6861 # CYGINT_ISO_PTHREAD_MUTEX == 0
6864 # The following properties are affected by this value
6865 # interface CYGINT_ISO_PTHREAD_MUTEX
6866 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
6869 # POSIX mutex/cond var implementation header
6871 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
6873 # No user value, uncomment the following line to provide one.
6875 # value_source default
6876 # Default value: 0 0
6882 cdl_component CYGPKG_ISO_LIMITS {
6883 # There is no associated value.
6887 # POSIX pthread limits implementations
6889 cdl_interface CYGINT_ISO_POSIX_LIMITS {
6890 # No options implement this inferface
6891 # This value cannot be modified here.
6894 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6895 # CYGINT_ISO_POSIX_LIMITS == 0
6898 # The following properties are affected by this value
6899 # interface CYGINT_ISO_POSIX_LIMITS
6900 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
6903 # POSIX pthread limits implementation header
6905 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
6907 # No user value, uncomment the following line to provide one.
6909 # value_source default
6910 # Default value: 0 0
6913 # OPEN_MAX implementation header
6915 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
6917 # No user value, uncomment the following line to provide one.
6919 # value_source default
6920 # Default value: 0 0
6923 # LINK_MAX implementation header
6925 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
6927 # No user value, uncomment the following line to provide one.
6929 # value_source default
6930 # Default value: 0 0
6933 # NAME_MAX implementation header
6935 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
6937 # No user value, uncomment the following line to provide one.
6939 # value_source default
6940 # Default value: 0 0
6943 # PATH_MAX implementation header
6945 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
6947 # No user value, uncomment the following line to provide one.
6949 # value_source default
6950 # Default value: 0 0
6956 cdl_component CYGPKG_ISO_TERMIOS {
6957 # There is no associated value.
6961 # POSIX termios implementations
6963 cdl_interface CYGINT_ISO_TERMIOS {
6964 # No options implement this inferface
6965 # This value cannot be modified here.
6968 # Requires: 1 >= CYGINT_ISO_TERMIOS
6969 # CYGINT_ISO_TERMIOS == 0
6972 # The following properties are affected by this value
6973 # interface CYGINT_ISO_TERMIOS
6974 # Requires: 1 >= CYGINT_ISO_TERMIOS
6977 # POSIX termios implementation header
6979 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
6981 # No user value, uncomment the following line to provide one.
6983 # value_source default
6984 # Default value: 0 0
6990 cdl_component CYGPKG_ISO_DLFCN {
6991 # There is no associated value.
6995 # Dynamic load implementations
6997 cdl_interface CYGINT_ISO_DLFCN {
6998 # No options implement this inferface
6999 # This value cannot be modified here.
7002 # Requires: 1 >= CYGINT_ISO_DLFCN
7003 # CYGINT_ISO_DLFCN == 0
7006 # The following properties are affected by this value
7007 # interface CYGINT_ISO_DLFCN
7008 # Requires: 1 >= CYGINT_ISO_DLFCN
7011 # Dynamic load implementation header
7013 cdl_option CYGBLD_ISO_DLFCN_HEADER {
7015 # No user value, uncomment the following line to provide one.
7017 # value_source default
7018 # Default value: 0 0
7022 # UNIX standard functions
7024 cdl_component CYGPKG_ISO_UNISTD {
7025 # There is no associated value.
7029 # POSIX timer operations implementations
7031 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
7032 # No options implement this inferface
7033 # This value cannot be modified here.
7035 # Current value: 0 0
7036 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
7037 # CYGINT_ISO_POSIX_TIMER_OPS == 0
7040 # The following properties are affected by this value
7041 # interface CYGINT_ISO_POSIX_TIMER_OPS
7042 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
7045 # POSIX timer operations implementation header
7047 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
7049 # No user value, uncomment the following line to provide one.
7051 # value_source default
7052 # Default value: 0 0
7055 # POSIX sleep() implementations
7057 cdl_interface CYGINT_ISO_POSIX_SLEEP {
7058 # No options implement this inferface
7059 # This value cannot be modified here.
7061 # Current value: 0 0
7062 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
7063 # CYGINT_ISO_POSIX_SLEEP == 0
7066 # The following properties are affected by this value
7067 # interface CYGINT_ISO_POSIX_SLEEP
7068 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
7071 # POSIX sleep() implementation header
7073 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
7075 # No user value, uncomment the following line to provide one.
7077 # value_source default
7078 # Default value: 0 0
7082 # select()/poll() functions
7084 cdl_component CYGPKG_ISO_SELECT {
7085 # There is no associated value.
7089 # select() implementations
7091 cdl_interface CYGINT_ISO_SELECT {
7092 # No options implement this inferface
7093 # This value cannot be modified here.
7095 # Current value: 0 0
7096 # Requires: 1 >= CYGINT_ISO_SELECT
7097 # CYGINT_ISO_SELECT == 0
7100 # The following properties are affected by this value
7101 # interface CYGINT_ISO_SELECT
7102 # Requires: 1 >= CYGINT_ISO_SELECT
7105 # select() implementation header
7107 cdl_option CYGBLD_ISO_SELECT_HEADER {
7109 # No user value, uncomment the following line to provide one.
7111 # value_source default
7112 # Default value: 0 0
7115 # poll() implementations
7117 cdl_interface CYGINT_ISO_POLL {
7118 # No options implement this inferface
7119 # This value cannot be modified here.
7121 # Current value: 0 0
7122 # Requires: 1 >= CYGINT_ISO_POLL
7123 # CYGINT_ISO_POLL == 0
7126 # The following properties are affected by this value
7127 # interface CYGINT_ISO_POLL
7128 # Requires: 1 >= CYGINT_ISO_POLL
7131 # poll() implementation header
7133 cdl_option CYGBLD_ISO_POLL_HEADER {
7135 # No user value, uncomment the following line to provide one.
7137 # value_source default
7138 # Default value: 0 0
7142 # NetDB utility functions
7144 cdl_component CYGPKG_ISO_NETDB {
7145 # There is no associated value.
7149 # DNS implementations
7151 cdl_interface CYGINT_ISO_DNS {
7152 # Implemented by CYGPKG_NS_DNS_BUILD, active, disabled
7153 # This value cannot be modified here.
7156 # Requires: 1 >= CYGINT_ISO_DNS
7157 # CYGINT_ISO_DNS == 0
7160 # The following properties are affected by this value
7161 # interface CYGINT_ISO_DNS
7162 # Requires: 1 >= CYGINT_ISO_DNS
7165 # DNS implementation header
7167 cdl_option CYGBLD_ISO_DNS_HEADER {
7169 # No user value, uncomment the following line to provide one.
7171 # The inferred value should not be edited directly.
7172 inferred_value 1 <cyg/ns/dns/dns.h>
7173 # value_source inferred
7174 # Default value: 0 0
7176 # The following properties are affected by this value
7177 # option CYGPKG_NS_DNS_BUILD
7178 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
7181 # Protocol network database implementations
7183 cdl_interface CYGINT_ISO_NETDB_PROTO {
7184 # No options implement this inferface
7185 # This value cannot be modified here.
7188 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
7189 # CYGINT_ISO_NETDB_PROTO == 0
7192 # The following properties are affected by this value
7193 # interface CYGINT_ISO_NETDB_PROTO
7194 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
7197 # Protocol network database implementation header
7199 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
7201 # No user value, uncomment the following line to provide one.
7203 # value_source default
7204 # Default value: 0 0
7207 # Services network database implementations
7209 cdl_interface CYGINT_ISO_NETDB_SERV {
7210 # No options implement this inferface
7211 # This value cannot be modified here.
7214 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
7215 # CYGINT_ISO_NETDB_SERV == 0
7218 # The following properties are affected by this value
7219 # interface CYGINT_ISO_NETDB_SERV
7220 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
7223 # Services network database implementation header
7225 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
7227 # No user value, uncomment the following line to provide one.
7229 # value_source default
7230 # Default value: 0 0
7235 # Package specific build options including control over
7236 # compiler flags used only in building this package,
7237 # and details of which tests are built.
7239 cdl_component CYGPKG_ISOINFRA_OPTIONS {
7240 # There is no associated value.
7244 # Additional compiler flags
7245 # This option modifies the set of compiler flags for
7246 # building the ISO C and POSIX infrastructure package.
7247 # These flags are used in addition to the set of global flags.
7249 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
7251 # No user value, uncomment the following line to provide one.
7253 # value_source default
7257 # Suppressed compiler flags
7258 # This option modifies the set of compiler flags for
7259 # building the ISO C and POSIX infrastructure package.
7260 # These flags are removed from the set of global flags
7263 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
7265 # No user value, uncomment the following line to provide one.
7267 # value_source default
7274 # doc: ref/net-ns-dns.html
7276 cdl_package CYGPKG_NS_DNS {
7277 # Packages cannot be added or removed, nor can their version be changed,
7278 # simply by editing their value. Instead the appropriate configuration
7279 # should be used to perform these actions.
7281 # This value cannot be modified here.
7283 # Current value: 1 current
7285 # The following properties are affected by this value
7286 # component CYGPKG_REDBOOT_NETWORKING_DNS
7287 # Requires: CYGPKG_NS_DNS
7291 # Build DNS NS client package
7293 cdl_option CYGPKG_NS_DNS_BUILD {
7295 # No user value, uncomment the following line to provide one.
7297 # The inferred value should not be edited directly.
7299 # value_source inferred
7301 # Requires: CYGBLD_ISO_DNS_HEADER == "<cyg/ns/dns/dns.h>"
7302 # CYGBLD_ISO_DNS_HEADER == <cyg/ns/dns/dns.h>
7304 # Requires: CYGPKG_NET
7305 # CYGPKG_NET (unknown) == 0
7307 # Requires: CYGINT_ISO_CTYPE
7308 # CYGINT_ISO_CTYPE == 0
7310 # Requires: CYGINT_ISO_MALLOC
7311 # CYGINT_ISO_MALLOC == 0
7313 # Requires: CYGINT_ISO_STRING_STRFUNCS
7314 # CYGINT_ISO_STRING_STRFUNCS == 1
7316 # Requires: CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD
7317 # CYGSEM_KERNEL_THREADS_DESTRUCTORS_PER_THREAD (unknown) == 0
7320 # The following properties are affected by this value
7321 # component CYGPKG_NS_DNS_DEFAULT
7322 # ActiveIf: CYGPKG_NS_DNS_BUILD
7323 # component CYGPKG_NS_DNS_DOMAINNAME
7324 # ActiveIf: CYGPKG_NS_DNS_BUILD
7325 # option CYGPKG_NS_DNS_TESTS
7326 # ActiveIf: CYGPKG_NS_DNS_BUILD
7327 # component CYGPKG_REDBOOT_NETWORKING_DNS
7328 # Requires: !CYGPKG_NS_DNS_BUILD
7331 # Provide a hard coded default server address
7332 # This option controls the use of a default, hard coded DNS
7333 # server. When this is enabled, the IP address in the CDL
7334 # option CYGDAT_NS_DNS_DEFAULT_SERVER is used in
7335 # init_all_network_interfaces() to start the resolver using
7336 # the specified server. The DHCP client or user code may
7337 # override this by restarting the resolver.
7339 cdl_component CYGPKG_NS_DNS_DEFAULT {
7340 # This option is not active
7341 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7342 # CYGPKG_NS_DNS_BUILD == 0
7346 # No user value, uncomment the following line to provide one.
7348 # value_source default
7353 # IP address of the default DNS server
7355 cdl_option CYGDAT_NS_DNS_DEFAULT_SERVER {
7356 # This option is not active
7357 # The parent CYGPKG_NS_DNS_DEFAULT is not active
7358 # The parent CYGPKG_NS_DNS_DEFAULT is disabled
7361 # No user value, uncomment the following line to provide one.
7362 # user_value 192.168.1.1
7363 # value_source default
7364 # Default value: 192.168.1.1
7368 # Provide a hard coded default domain name
7369 # This option controls the use of a default, hard coded
7370 # domain name to be used when querying a DNS server. When
7371 # this is enabled, the name in the CDL option
7372 # CYGDAT_NS_DNS_DOMAINNAME_NAME is used in
7373 # init_all_network_interfaces() to set the domain name as
7374 # accessed by getdomainname().
7376 cdl_component CYGPKG_NS_DNS_DOMAINNAME {
7377 # This option is not active
7378 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7379 # CYGPKG_NS_DNS_BUILD == 0
7383 # No user value, uncomment the following line to provide one.
7385 # value_source default
7390 # Domain name for this device
7392 cdl_option CYGDAT_NS_DNS_DOMAINNAME_NAME {
7393 # This option is not active
7394 # The parent CYGPKG_NS_DNS_DOMAINNAME is not active
7395 # The parent CYGPKG_NS_DNS_DOMAINNAME is disabled
7398 # No user value, uncomment the following line to provide one.
7399 # user_value default.domain.com
7400 # value_source default
7401 # Default value: default.domain.com
7405 # DNS support build options
7407 cdl_component CYGPKG_NS_DNS_OPTIONS {
7408 # There is no associated value.
7412 # Additional compiler flags
7413 # This option modifies the set of compiler flags for
7414 # building the DNS package.
7415 # These flags are used in addition
7416 # to the set of global flags.
7418 cdl_option CYGPKG_NS_DNS_CFLAGS_ADD {
7420 # No user value, uncomment the following line to provide one.
7421 # user_value "-D_KERNEL -D__ECOS"
7422 # value_source default
7423 # Default value: "-D_KERNEL -D__ECOS"
7426 # Suppressed compiler flags
7427 # This option modifies the set of compiler flags for
7428 # building the DNS package. These flags are removed from
7429 # the set of global flags if present.
7431 cdl_option CYGPKG_NS_DNS_CFLAGS_REMOVE {
7433 # No user value, uncomment the following line to provide one.
7435 # value_source default
7441 # This option specifies the set of tests for the DNS package.
7443 cdl_option CYGPKG_NS_DNS_TESTS {
7444 # This option is not active
7445 # ActiveIf constraint: CYGPKG_NS_DNS_BUILD
7446 # CYGPKG_NS_DNS_BUILD == 0
7449 # Calculated value: "tests/dns1 tests/dns2"
7451 # Current_value: tests/dns1 tests/dns2
7456 # doc: ref/services-crc.html
7457 # This package provides support for CRC calculation. Currently
7458 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
7459 # Gary S. Brown, and a 16 bit CRC.
7461 cdl_package CYGPKG_CRC {
7462 # Packages cannot be added or removed, nor can their version be changed,
7463 # simply by editing their value. Instead the appropriate configuration
7464 # should be used to perform these actions.
7466 # This value cannot be modified here.
7468 # Current value: 1 current
7474 cdl_option CYGPKG_CRC_TESTS {
7475 # Calculated value: "tests/crc_test"
7477 # Current_value: tests/crc_test