1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source inferred
95 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX27
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX27 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX27 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
798 # Ethernet transceiver (PHY) support
799 # API for ethernet PHY devices
801 cdl_package CYGPKG_DEVS_ETH_PHY {
802 # Packages cannot be added or removed, nor can their version be changed,
803 # simply by editing their value. Instead the appropriate configuration
804 # should be used to perform these actions.
806 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
807 # CYGPKG_IO_ETH_DRIVERS == current
810 # This value cannot be modified here.
812 # Current value: 1 current
813 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
814 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
819 # Enable driver debugging
820 # Enables the diagnostic debug messages on the
823 cdl_option CYGDBG_DEVS_ETH_PHY {
825 # No user value, uncomment the following line to provide one.
827 # value_source default
831 # Time period (seconds) to wait for auto-negotiation
832 # The length of time to wait for auto-negotiation to complete
833 # before giving up and declaring the link dead/missing.
835 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
837 # No user value, uncomment the following line to provide one.
839 # value_source default
844 # Include support for National Semiconductor DP83847 DsPHYTER II
846 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
848 # No user value, uncomment the following line to provide one.
850 # value_source default
855 # Include support for AMD 79C874 NetPHY
857 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
859 # No user value, uncomment the following line to provide one.
861 # value_source default
866 # Include support for Intel LXT972xxx PHY
868 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
870 # No user value, uncomment the following line to provide one.
872 # value_source default
877 # Include support for ICS 1890 PHY
879 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
881 # No user value, uncomment the following line to provide one.
883 # value_source default
888 # Include support for ICS 1892 PHY
890 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
892 # No user value, uncomment the following line to provide one.
894 # value_source default
899 # Include support for ICS 1893 and 1893AF PHY
901 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
903 # No user value, uncomment the following line to provide one.
905 # value_source default
910 # Include support for the Davicom DM9161A PHY
912 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
914 # No user value, uncomment the following line to provide one.
916 # value_source default
921 # Include support for the Micrel KS8721 PHY
923 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
925 # No user value, uncomment the following line to provide one.
927 # value_source default
932 # Include support for SMSC LAN8700 NetPHY
934 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
936 # No user value, uncomment the following line to provide one.
938 # The inferred value should not be edited directly.
940 # value_source inferred
943 # The following properties are affected by this value
944 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
945 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
950 # ISO C library internationalization functions
952 # This package provides internationalization functions specified by the
953 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
954 # functionality and <ctype.h> functionality.
956 cdl_package CYGPKG_LIBC_I18N {
957 # Packages cannot be added or removed, nor can their version be changed,
958 # simply by editing their value. Instead the appropriate configuration
959 # should be used to perform these actions.
961 # This value cannot be modified here.
963 # Current value: 1 current
964 # Requires: CYGPKG_ISOINFRA
965 # CYGPKG_ISOINFRA == current
971 # These options determine which locales other than the "C" locale
972 # are supported and hence contribute to the size of the executable.
974 cdl_component CYGPKG_LIBC_I18N_LOCALES {
975 # There is no associated value.
979 # Support for multiple locales required
981 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
982 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
983 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
984 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
985 # This value cannot be modified here.
988 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
989 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
992 # The following properties are affected by this value
995 # C-SJIS locale support
996 # This option controls if the "C-SJIS" locale will be
997 # supported by setlocale(). The locale is a hybrid locale
998 # that is mostly the "C" locale with Japanese SJIS multibyte
1001 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1003 # No user value, uncomment the following line to provide one.
1005 # value_source default
1008 # The following properties are affected by this value
1009 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1010 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1011 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1012 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1015 # C-JIS locale support
1016 # This option controls if the "C-JIS" locale will be
1017 # supported by setlocale(). The locale is a hybrid locale
1018 # that is mostly the "C" locale with Japanese JIS multibyte
1021 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1023 # No user value, uncomment the following line to provide one.
1025 # value_source default
1028 # The following properties are affected by this value
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1031 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1032 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1035 # C-EUCJP locale support
1036 # This option controls if the "C-EUCJP" locale will be
1037 # supported by setlocale(). The locale is a hybrid locale
1038 # that is mostly the "C" locale with Japanese EUCJP multibyte
1041 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1043 # No user value, uncomment the following line to provide one.
1045 # value_source default
1048 # The following properties are affected by this value
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1051 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1052 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1056 # Newlib's ctype implementation
1057 # This option enables the implementation of the ctype functions
1058 # that comes with newlib. It is table driven and therefore
1059 # exhibits different performance characteristics. It also offers
1060 # a limited amount of binary compatibility
1061 # with newlib so that programs linked against newlib ctype/locale
1062 # do not need to be recompiled when linked with eCos.
1064 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1066 # No user value, uncomment the following line to provide one.
1068 # value_source default
1070 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1071 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1075 # Per-thread multibyte state
1076 # This option controls whether the multibyte character
1077 # handling functions mblen(), mbtowc(), and wctomb(),
1078 # have their state recorded on a per-thread
1079 # basis rather than global. If this option is
1080 # disabled, some per-thread space can be saved.
1081 # Enabling this option will use three slots
1082 # of kernel per-thread data. You should ensure you
1083 # have enough slots configured for all your
1086 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1087 # This option is not active
1088 # ActiveIf constraint: CYGPKG_KERNEL
1089 # CYGPKG_KERNEL (unknown) == 0
1093 # No user value, uncomment the following line to provide one.
1095 # value_source default
1096 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1097 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1099 # Requires: CYGVAR_KERNEL_THREADS_DATA
1100 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1104 # Size of locale name strings
1105 # This option controls the maximum size of
1106 # locale names and is used, among other things
1107 # to instantiate a static string used
1108 # as a return value from the
1109 # setlocale() function. When requesting the
1110 # current locale settings with LC_ALL, a string
1111 # must be constructed to contain this data, rather
1112 # than just returning a constant string. This
1113 # string data is stored in the static string.
1114 # This depends on the length of locale names,
1115 # hence this option. If just the C locale is
1116 # present, this option can be set as low as 2.
1118 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1120 # No user value, uncomment the following line to provide one.
1122 # value_source default
1123 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1124 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1125 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1126 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1128 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1129 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1130 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1131 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1134 # Inline versions of <ctype.h> functions
1135 # This option chooses whether the simple character
1136 # classification and conversion functions (e.g.
1137 # isupper(), isalpha(), toupper(), etc.)
1138 # from <ctype.h> are available as inline
1139 # functions. This may improve performance and as
1140 # the functions are small, may even improve code
1143 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1145 # No user value, uncomment the following line to provide one.
1147 # value_source default
1149 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1150 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1154 # C library i18n functions build options
1155 # Package specific build options including control over
1156 # compiler flags used only in building this package,
1157 # and details of which tests are built.
1159 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1160 # There is no associated value.
1164 # Additional compiler flags
1165 # This option modifies the set of compiler flags for
1166 # building the C library. These flags are used in addition
1167 # to the set of global flags.
1169 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1171 # No user value, uncomment the following line to provide one.
1172 # user_value "-fno-rtti -Woverloaded-virtual"
1173 # value_source default
1174 # Default value: "-fno-rtti -Woverloaded-virtual"
1177 # Suppressed compiler flags
1178 # This option modifies the set of compiler flags for
1179 # building the C library. These flags are removed from
1180 # the set of global flags if present.
1182 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1184 # No user value, uncomment the following line to provide one.
1185 # user_value -Wno-pointer-sign
1186 # value_source default
1187 # Default value: -Wno-pointer-sign
1190 # C library i18n function tests
1191 # This option specifies the set of tests for the C library
1194 cdl_option CYGPKG_LIBC_I18N_TESTS {
1195 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1197 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1202 # ISO C library general utility functions
1203 # doc: ref/libc.html
1204 # This package provides general utility functions in <stdlib.h>
1205 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1207 cdl_package CYGPKG_LIBC_STDLIB {
1208 # Packages cannot be added or removed, nor can their version be changed,
1209 # simply by editing their value. Instead the appropriate configuration
1210 # should be used to perform these actions.
1212 # This value cannot be modified here.
1214 # Current value: 1 current
1215 # Requires: CYGPKG_ISOINFRA
1216 # CYGPKG_ISOINFRA == current
1218 # Requires: CYGINT_ISO_CTYPE
1219 # CYGINT_ISO_CTYPE == 1
1221 # Requires: CYGINT_ISO_STRING_STRFUNCS
1222 # CYGINT_ISO_STRING_STRFUNCS == 1
1227 # Inline versions of <stdlib.h> functions
1228 # This option chooses whether some of the
1229 # particularly simple standard utility functions
1230 # from <stdlib.h> are available as inline
1231 # functions. This may improve performance, and as
1232 # the functions are small, may even improve code
1235 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1236 # There is no associated value.
1242 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1244 # No user value, uncomment the following line to provide one.
1246 # value_source default
1248 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1249 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1255 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1257 # No user value, uncomment the following line to provide one.
1259 # value_source default
1261 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1262 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1266 # atof() / atoi() / atol()
1268 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1270 # No user value, uncomment the following line to provide one.
1272 # value_source default
1274 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1275 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1280 # Random number generation
1281 # These options control the behaviour of the
1282 # functions rand(), srand() and rand_r()
1284 cdl_component CYGPKG_LIBC_RAND {
1285 # There is no associated value.
1289 # Per-thread random seed
1290 # doc: ref/libc-thread-safety.html
1291 # This option controls whether the pseudo-random
1292 # number generation functions rand() and srand()
1293 # have their state recorded on a per-thread
1294 # basis rather than global. If this option is
1295 # disabled, some per-thread space can be saved.
1296 # Note there is also a POSIX-standard rand_r()
1297 # function to achieve a similar effect with user
1298 # support. Enabling this option will use one slot
1299 # of kernel per-thread data. You should ensure you
1300 # have enough slots configured for all your
1303 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1305 # No user value, uncomment the following line to provide one.
1307 # value_source default
1309 # Requires: CYGVAR_KERNEL_THREADS_DATA
1310 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1314 # Random number seed
1315 # This selects the initial random number seed for
1316 # rand()'s pseudo-random number generator. For
1317 # strict ISO standard compliance, this should be 1,
1318 # as per section 7.10.2.2 of the standard.
1320 cdl_option CYGNUM_LIBC_RAND_SEED {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Legal values: 0 to 0x7fffffff
1330 # Trace verbosity level for debugging the rand(),
1331 # srand() and rand_r() functions. Increase this
1332 # value to get additional trace output.
1334 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1336 # No user value, uncomment the following line to provide one.
1338 # value_source default
1340 # Legal values: 0 to 1
1343 # Simplest implementation
1344 # This provides a very simple implementation of rand()
1345 # that does not perform well with randomness in the
1346 # lower significant bits. However it is exceptionally
1347 # fast. It uses the sample algorithm from the ISO C
1350 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1352 # No user value, uncomment the following line to provide one.
1354 # value_source default
1358 # Simple implementation #1
1359 # This provides a very simple implementation of rand()
1360 # based on the simplest implementation above. However
1361 # it does try to work around the lack of randomness
1362 # in the lower significant bits, at the expense of a
1365 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1372 # Knuth implementation #1
1373 # This implements a slightly more complex algorithm
1374 # published in Donald E. Knuth's Art of Computer
1375 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1376 # This produces better random numbers than the
1377 # simplest approach but is slower.
1379 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1388 # This option allows use of the utility function
1389 # strtod() (and consequently atof()) to convert
1390 # from string to double precision floating point
1391 # numbers. Disabling this option removes the
1392 # dependency on the math library package.
1394 cdl_option CYGFUN_LIBC_strtod {
1396 # No user value, uncomment the following line to provide one.
1398 # value_source default
1399 # Default value: 0 != CYGPKG_LIBM
1400 # CYGPKG_LIBM (unknown) == 0
1402 # Requires: CYGPKG_LIBM
1403 # CYGPKG_LIBM (unknown) == 0
1407 # Provides long long conversion functions
1408 # Enabling this option will provide support for the strtoll(),
1409 # strtoull() and atoll() conversion functions, which are
1410 # the long long variants of the standard versions of these
1411 # functions. Supporting this requires extra code and compile
1414 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1421 # bsearch() tracing level
1422 # Trace verbosity level for debugging the <stdlib.h>
1423 # binary search function bsearch(). Increase this
1424 # value to get additional trace output.
1426 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1428 # No user value, uncomment the following line to provide one.
1430 # value_source default
1432 # Legal values: 0 to 1
1435 # qsort() tracing level
1436 # Trace verbosity level for debugging the <stdlib.h>
1437 # quicksort function qsort(). Increase this value
1438 # to get additional trace output.
1440 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1442 # No user value, uncomment the following line to provide one.
1444 # value_source default
1446 # Legal values: 0 to 1
1449 # C library stdlib build options
1450 # Package specific build options including control over
1451 # compiler flags used only in building this package,
1452 # and details of which tests are built.
1454 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1455 # There is no associated value.
1459 # Additional compiler flags
1460 # This option modifies the set of compiler flags for
1461 # building this package. These flags are used in addition
1462 # to the set of global flags.
1464 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1466 # No user value, uncomment the following line to provide one.
1467 # user_value "-fno-rtti -Woverloaded-virtual"
1468 # value_source default
1469 # Default value: "-fno-rtti -Woverloaded-virtual"
1472 # Suppressed compiler flags
1473 # This option modifies the set of compiler flags for
1474 # building this package. These flags are removed from
1475 # the set of global flags if present.
1477 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1479 # No user value, uncomment the following line to provide one.
1480 # user_value -Wno-pointer-sign
1481 # value_source default
1482 # Default value: -Wno-pointer-sign
1485 # C library stdlib tests
1486 # This option specifies the set of tests for this package.
1488 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1489 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1491 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1498 # doc: ref/the-ecos-hardware-abstraction-layer.html
1499 # The eCos HAL package provide a porting layer for
1500 # higher-level parts of the system such as the kernel and the
1501 # C library. Each installation should have HAL packages for
1502 # one or more architectures, and for each architecture there
1503 # may be one or more supported platforms. It is necessary to
1504 # select one target architecture and one platform for that
1505 # architecture. There are also a number of configuration
1506 # options that are common to all HAL packages.
1508 cdl_package CYGPKG_HAL {
1509 # Packages cannot be added or removed, nor can their version be changed,
1510 # simply by editing their value. Instead the appropriate configuration
1511 # should be used to perform these actions.
1513 # This value cannot be modified here.
1515 # Current value: 1 current
1516 # Requires: CYGPKG_INFRA
1517 # CYGPKG_INFRA == current
1520 # The following properties are affected by this value
1524 # Platform-independent HAL options
1525 # A number of configuration options are common to most or all
1526 # HAL packages, for example options controlling how much state
1527 # should be saved during a context switch. The implementations
1528 # of these options will vary from architecture to architecture.
1530 cdl_component CYGPKG_HAL_COMMON {
1531 # There is no associated value.
1535 # Provide eCos kernel support
1536 # The HAL can be configured to either support the full eCos
1537 # kernel, or to support only very simple applications which do
1538 # not require a full kernel. If kernel support is not required
1539 # then some of the startup, exception, and interrupt handling
1540 # code can be eliminated.
1542 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1544 # No user value, uncomment the following line to provide one.
1546 # value_source default
1547 # Default value: CYGPKG_KERNEL
1548 # CYGPKG_KERNEL (unknown) == 0
1550 # Requires: CYGPKG_KERNEL
1551 # CYGPKG_KERNEL (unknown) == 0
1555 # HAL exception support
1556 # When a processor exception occurs, for example an attempt to
1557 # execute an illegal instruction or to perform a divide by
1558 # zero, this exception may be handled in a number of different
1559 # ways. If the target system has gdb support then typically
1560 # the exception will be handled by gdb code. Otherwise if the
1561 # HAL exception support is enabled then the HAL will invoke a
1562 # routine deliver_exception(). Typically this routine will be
1563 # provided by the eCos kernel, but it is possible for
1564 # application code to provide its own implementation. If the
1565 # HAL exception support is not enabled and a processor
1566 # exception occurs then the behaviour of the system is
1569 cdl_option CYGPKG_HAL_EXCEPTIONS {
1571 # No user value, uncomment the following line to provide one.
1573 # value_source default
1574 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1575 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1577 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1578 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1582 # Stop calling constructors early
1583 # This option supports environments where some constructors
1584 # must be run in the context of a thread rather than at
1585 # simple system startup time. A boolean flag named
1586 # cyg_hal_stop_constructors is set to 1 when constructors
1587 # should no longer be invoked. It is up to some other
1588 # package to deal with the rest of the constructors.
1589 # In the current version this is only possible with the
1592 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1594 # No user value, uncomment the following line to provide one.
1596 # value_source default
1598 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1599 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1603 # HAL uses the MMU and allows for CDL manipulation of it's use
1605 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1606 # No options implement this inferface
1607 # This value cannot be modified here.
1611 # The following properties are affected by this value
1612 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1613 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1616 # Install MMU tables.
1617 # This option controls whether this application installs
1618 # its own Memory Management Unit (MMU) tables, or relies on the
1619 # existing environment to run.
1621 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1622 # This option is not active
1623 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1624 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1628 # No user value, uncomment the following line to provide one.
1630 # value_source default
1631 # Default value: CYG_HAL_STARTUP != "RAM"
1632 # CYG_HAL_STARTUP == ROMRAM
1635 # The following properties are affected by this value
1636 # option CYGSEM_HAL_STATIC_MMU_TABLES
1637 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1640 # Use static MMU tables.
1641 # This option defines an environment where any Memory
1642 # Management Unit (MMU) tables are constant. Normally used by ROM
1643 # based environments, this provides a way to save RAM usage which
1644 # would otherwise be required for these tables.
1646 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1648 # No user value, uncomment the following line to provide one.
1650 # value_source default
1652 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1653 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1657 # Route diagnostic output to debug channel
1658 # If not inheriting the console setup from the ROM monitor,
1659 # it is possible to redirect diagnostic output to the debug
1660 # channel by enabling this option. Depending on the debugger
1661 # used it may also be necessary to select a mangler for the
1662 # output to be displayed by the debugger.
1664 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1665 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1666 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1668 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1669 # CYGPKG_HAL_ARM == current
1670 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1671 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1672 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1676 # No user value, uncomment the following line to provide one.
1678 # value_source default
1679 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1680 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1681 # CYG_HAL_STARTUP == ROMRAM
1684 # The following properties are affected by this value
1685 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1686 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1690 # Mangler used on diag output
1691 # It is sometimes necessary to mangle (encode) the
1692 # diag ASCII text output in order for it to show up at the
1693 # other end. In particular, GDB may silently ignore raw
1696 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1697 # This option is not active
1698 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1701 # No user value, uncomment the following line to provide one.
1703 # value_source default
1704 # Default value: GDB
1705 # Legal values: "GDB" "None"
1710 # HAL interrupt handling
1711 # A number of configuration options related to interrupt
1712 # handling are common to most or all HAL packages, even though
1713 # the implementations will vary from architecture to
1716 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1717 # There is no associated value.
1721 # Use separate stack for interrupts
1722 # When an interrupt occurs this interrupt can be handled either
1723 # on the current stack or on a separate stack maintained by the
1724 # HAL. Using a separate stack requires a small number of extra
1725 # instructions in the interrupt handling code, but it has the
1726 # advantage that it is no longer necessary to allow extra space
1727 # in every thread stack for the interrupt handlers. The amount
1728 # of extra space required depends on the interrupt handlers
1729 # that are being used.
1731 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1733 # No user value, uncomment the following line to provide one.
1735 # The inferred value should not be edited directly.
1737 # value_source inferred
1740 # The following properties are affected by this value
1741 # package CYGPKG_REDBOOT
1742 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1745 # Interrupt stack size
1746 # This configuration option specifies the stack size in bytes
1747 # for the interrupt stack. Typically this should be a multiple
1748 # of 16, but the exact requirements will vary from architecture
1749 # to architecture. The interrupt stack serves two separate
1750 # purposes. It is used as the stack during system
1751 # initialization. In addition, if the interrupt system is
1752 # configured to use a separate stack then all interrupts will
1753 # be processed on this stack. The exact memory requirements
1754 # will vary from application to application, and will depend
1755 # heavily on whether or not other interrupt-related options,
1756 # for example nested interrupts, are enabled. On most targets,
1757 # in a configuration with no kernel this stack will also be
1758 # the stack used to invoke the application, and must obviously
1759 # be appropriately large in that case.
1761 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1763 # No user value, uncomment the following line to provide one.
1765 # value_source default
1766 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1767 # CYGPKG_KERNEL (unknown) == 0
1769 # Legal values: 128 to 1048576
1772 # Allow nested interrupts
1773 # When an interrupt occurs the HAL interrupt handling code can
1774 # either leave interrupts disabled for the duration of the
1775 # interrupt handling code, or by doing some extra work it can
1776 # reenable interrupts before invoking the interrupt handler and
1777 # thus allow nested interrupts to happen. If all the interrupt
1778 # handlers being used are small and do not involve any loops
1779 # then it is usually better to disallow nested interrupts.
1780 # However if any of the interrupt handlers are more complicated
1781 # than nested interrupts will usually be required.
1783 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1785 # No user value, uncomment the following line to provide one.
1787 # value_source default
1791 # Save minimum context on interrupt
1792 # The HAL interrupt handling code can exploit the calling conventions
1793 # defined for a given architecture to reduce the amount of state
1794 # that has to be saved. Generally this improves performance and
1795 # reduces code size. However it can make source-level debugging
1798 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1800 # No user value, uncomment the following line to provide one.
1802 # The inferred value should not be edited directly.
1804 # value_source inferred
1807 # The following properties are affected by this value
1808 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1809 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1810 # component CYGBLD_BUILD_REDBOOT
1811 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1814 # Chain all interrupts together
1815 # Interrupts can be attached to vectors either singly, or be
1816 # chained together. The latter is necessary if there is no way
1817 # of discovering which device has interrupted without
1818 # inspecting the device itself. It can also reduce the amount
1819 # of RAM needed for interrupt decoding tables and code.
1821 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1823 # No user value, uncomment the following line to provide one.
1825 # value_source default
1829 # Ignore spurious [fleeting] interrupts
1830 # On some hardware, interrupt sources may not be de-bounced or
1831 # de-glitched. Rather than try to handle these interrupts (no
1832 # handling may be possible), this option allows the HAL to simply
1833 # ignore them. In most cases, if the interrupt is real it will
1834 # reoccur in a detectable form.
1836 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1838 # No user value, uncomment the following line to provide one.
1840 # value_source default
1845 # HAL context switch support
1846 # A number of configuration options related to thread contexts
1847 # are common to most or all HAL packages, even though the
1848 # implementations will vary from architecture to architecture.
1850 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1851 # There is no associated value.
1853 # The following properties are affected by this value
1857 # Use minimum thread context
1858 # The thread context switch code can exploit the calling
1859 # conventions defined for a given architecture to reduce the
1860 # amount of state that has to be saved during a context
1861 # switch. Generally this improves performance and reduces
1862 # code size. However it can make source-level debugging more
1865 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1867 # No user value, uncomment the following line to provide one.
1869 # The inferred value should not be edited directly.
1871 # value_source inferred
1874 # The following properties are affected by this value
1875 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1876 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1877 # component CYGBLD_BUILD_REDBOOT
1878 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1882 # Explicit control over cache behaviour
1883 # These options let the default behaviour of the caches
1884 # be easily configurable.
1886 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1887 # There is no associated value.
1891 # Enable DATA cache on startup
1892 # Enabling this option will cause the data cache to be enabled
1893 # as soon as practicable when eCos starts up. One would choose
1894 # to disable this if the data cache cannot safely be turned on,
1895 # such as a case where the cache(s) require additional platform
1898 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1900 # No user value, uncomment the following line to provide one.
1902 # value_source default
1907 # DATA cache mode on startup
1908 # This option controls the mode the cache will be set to
1909 # when enabled on startup.
1911 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1913 # No user value, uncomment the following line to provide one.
1914 # user_value COPYBACK
1915 # value_source default
1916 # Default value: COPYBACK
1917 # Legal values: "COPYBACK" "WRITETHRU"
1921 # Enable INSTRUCTION cache on startup
1922 # Enabling this option will cause the instruction cache to be enabled
1923 # as soon as practicable when eCos starts up. One would choose
1924 # to disable this if the instruction cache cannot safely be turned on,
1925 # such as a case where the cache(s) require additional platform
1928 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1930 # No user value, uncomment the following line to provide one.
1932 # value_source default
1937 # Source-level debugging support
1938 # If the source level debugger gdb is to be used for debugging
1939 # application code then it may be necessary to configure in support
1940 # for this in the HAL.
1942 cdl_component CYGPKG_HAL_DEBUG {
1943 # There is no associated value.
1947 # Support for GDB stubs
1948 # The HAL implements GDB stubs for the target.
1950 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1951 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1952 # This value cannot be modified here.
1956 # The following properties are affected by this value
1957 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1958 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1959 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1960 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1963 # Include GDB stubs in HAL
1964 # This option causes a set of GDB stubs to be included into the
1965 # system. On some target systems the GDB support will be
1966 # provided by other means, for example by a ROM monitor. On
1967 # other targets, especially when building a ROM-booting system,
1968 # the necessary support has to go into the target library
1969 # itself. When GDB stubs are include in a configuration, HAL
1970 # serial drivers must also be included.
1972 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1973 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1974 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1978 # No user value, uncomment the following line to provide one.
1980 # The inferred value should not be edited directly.
1982 # value_source inferred
1984 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1985 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1987 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1988 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
1990 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1991 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
1993 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1994 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1995 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1998 # The following properties are affected by this value
1999 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2000 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2001 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2003 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2004 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2005 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2006 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2007 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2008 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2009 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2010 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2011 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2012 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2013 # option CYGPKG_HAL_GDB_FILEIO
2014 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2015 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2016 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2017 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2019 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # Support for external break support in GDB stubs
2024 # The HAL implements external break (or asynchronous interrupt)
2025 # in the GDB stubs for the target.
2027 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2028 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2029 # This value cannot be modified here.
2033 # The following properties are affected by this value
2034 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2035 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2038 # Include GDB external break support for stubs
2039 # This option causes the GDB stub to add a serial interrupt handler
2040 # which will listen for GDB break packets. This lets you stop the
2041 # target asynchronously when using GDB, usually by hitting Control+C
2042 # or pressing the STOP button. This option differs from
2043 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2044 # GDB stubs are present.
2046 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2047 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2048 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2052 # No user value, uncomment the following line to provide one.
2054 # value_source default
2055 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2056 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2058 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2059 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2062 # The following properties are affected by this value
2063 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2064 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2065 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2066 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2067 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2068 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2071 # Platform does not support CTRLC
2073 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2074 # No options implement this inferface
2075 # This value cannot be modified here.
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2084 # Include GDB external break support when no stubs
2085 # This option adds an interrupt handler for the GDB serial line
2086 # which will listen for GDB break packets. This lets you stop the
2087 # target asynchronously when using GDB, usually by hitting Control+C
2088 # or pressing the STOP button. This option differs from
2089 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2090 # stubs are NOT present.
2092 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2093 # This option is not active
2094 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2095 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2096 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2098 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2099 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2103 # No user value, uncomment the following line to provide one.
2105 # value_source default
2106 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2107 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2109 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2110 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2113 # The following properties are affected by this value
2114 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2115 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2116 # component CYGBLD_BUILD_REDBOOT
2117 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2120 # Include GDB multi-threading debug support
2121 # This option enables some extra HAL code which is needed
2122 # to support multi-threaded source level debugging.
2124 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2125 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2126 # CYGSEM_HAL_ROM_MONITOR == 1
2127 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2131 # No user value, uncomment the following line to provide one.
2133 # value_source default
2136 # The following properties are affected by this value
2137 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2138 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2139 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2140 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2143 # Number of times to retry sending a $O packet
2144 # This option controls the number of attempts that eCos programs
2145 # will make to send a $O packet to a host GDB process. If it is
2146 # set non-zero, then the target process will attempt to resend the
2147 # $O packet data up to this number of retries. Caution: use of
2148 # this option is not recommended as it can thoroughly confuse the
2151 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2153 # No user value, uncomment the following line to provide one.
2155 # value_source default
2159 # Timeout period for GDB packets
2160 # This option controls the time (in milliseconds) that eCos programs
2161 # will wait for a response when sending packets to a host GDB process.
2162 # If this time elapses, then the packet will be resent, up to some
2163 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2165 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2167 # No user value, uncomment the following line to provide one.
2169 # value_source default
2170 # Default value: 500
2173 # Location of CRC32 table
2174 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2175 # and placed in ROM, or generated at runtime in RAM. Depending on
2176 # your memory constraints, one of these options may be better.
2178 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2180 # No user value, uncomment the following line to provide one.
2182 # value_source default
2183 # Default value: RAM
2184 # Legal values: "ROM" "RAM"
2188 # ROM monitor support
2189 # Support for ROM monitors can be built in to your application.
2190 # It may also be relevant to build your application as a ROM monitor
2191 # itself. Such options are contained here if relevant for your chosen
2192 # platform. The options and ROM monitors available to choose are
2193 # platform-dependent.
2195 cdl_component CYGPKG_HAL_ROM_MONITOR {
2196 # There is no associated value.
2198 # The following properties are affected by this value
2202 # Target has virtual vector support
2204 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2205 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2206 # This value cannot be modified here.
2210 # The following properties are affected by this value
2211 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2212 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2215 # Target supports baud rate control via vectors
2216 # Whether this target supports the __COMMCTL_GETBAUD
2217 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2219 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2220 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2221 # This value cannot be modified here.
2225 # The following properties are affected by this value
2226 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2227 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2230 # Enable use of virtual vector calling interface
2231 # Virtual vector support allows the HAL to let the ROM
2232 # monitor handle certain operations. The virtual vector table
2233 # defines a calling interface between applications running in
2234 # RAM and the ROM monitor.
2236 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2237 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2238 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2241 # Calculated value: 1
2245 # The following properties are affected by this value
2246 # component CYGBLD_BUILD_REDBOOT
2247 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2248 # package CYGPKG_DEVS_ETH_PHY
2249 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2253 # Inherit console settings from ROM monitor
2254 # When this option is set, the application will inherit
2255 # the console as set up by the ROM monitor. This means
2256 # that the application will use whatever channel and
2257 # mangling style was used by the ROM monitor when
2258 # the application was launched.
2260 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2261 # This option is not active
2262 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2263 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2267 # No user value, uncomment the following line to provide one.
2269 # value_source default
2270 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2271 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2274 # The following properties are affected by this value
2275 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2276 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2277 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2278 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2281 # Debug channel is configurable
2282 # This option is a configuration hint - it is enabled
2283 # when the HAL initialization code will make use
2284 # of the debug channel configuration option.
2286 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2287 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2294 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2297 # Console channel is configurable
2298 # This option is a configuration hint - it is enabled
2299 # when the HAL initialization code will make use
2300 # of the console channel configuration option.
2302 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2303 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2304 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2305 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2314 # Initialize whole of virtual vector table
2315 # This option will cause the whole of the virtual
2316 # vector table to be initialized with dummy values on
2317 # startup. When this option is enabled, all the
2318 # options below must also be enabled - or the
2319 # table would be empty when the application
2321 # On targets where older ROM monitors without
2322 # virtual vector support may still be in use, it is
2323 # necessary for RAM applictions to initialize the
2324 # table (since all HAL diagnostics and debug IO
2325 # happens via the table).
2327 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2329 # No user value, uncomment the following line to provide one.
2331 # value_source default
2332 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2333 # CYG_HAL_STARTUP == ROMRAM
2334 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2336 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2337 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2339 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2340 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2342 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2343 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2345 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2346 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2348 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2349 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2352 # The following properties are affected by this value
2353 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2354 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2355 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2356 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2357 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2358 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2359 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2360 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2361 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2362 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2363 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2365 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2369 # Claim virtual vector table entries by default
2370 # By default most virtual vectors will be claimed by
2371 # RAM startup configurations, meaning that the RAM
2372 # application will provide the services. The
2373 # exception is COMMS support (HAL
2374 # diagnostics/debugging IO) which is left in the
2375 # control of the ROM monitor.
2376 # The reasoning behind this is to get as much of the
2377 # code exercised during regular development so it
2378 # is known to be working the few times a new ROM
2379 # monitor or a ROM production configuration is used
2380 # - COMMS are excluded only by necessity in order to
2381 # avoid breaking an existing debugger connections
2382 # (there may be ways around this).
2383 # For production RAM configurations this option can
2384 # be switched off, causing the appliction to rely on
2385 # the ROM monitor for these services, thus
2386 # saving some space.
2387 # Individual vectors may also be left unclaimed,
2388 # controlled by the below options (meaning that the
2389 # associated service provided by the ROM monitor
2392 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2393 # This option is not active
2394 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2395 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2399 # No user value, uncomment the following line to provide one.
2401 # value_source default
2404 # The following properties are affected by this value
2405 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2406 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2407 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2408 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2409 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2410 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2411 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2412 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2415 # Claim reset virtual vectors
2416 # This option will cause the reset and kill_by_reset
2417 # virtual vectors to be claimed.
2419 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2421 # No user value, uncomment the following line to provide one.
2423 # value_source default
2424 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2426 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2429 # The following properties are affected by this value
2430 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2431 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2434 # Claim version virtual vectors
2435 # This option will cause the version
2436 # virtual vectors to be claimed.
2438 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2440 # No user value, uncomment the following line to provide one.
2442 # value_source default
2443 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2448 # Claim delay_us virtual vector
2449 # This option will cause the delay_us
2450 # virtual vector to be claimed.
2452 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2454 # No user value, uncomment the following line to provide one.
2456 # value_source default
2457 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2458 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2459 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2462 # The following properties are affected by this value
2463 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2464 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2467 # Claim cache virtual vectors
2468 # This option will cause the cache virtual vectors
2471 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2473 # No user value, uncomment the following line to provide one.
2475 # value_source default
2476 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2478 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2481 # The following properties are affected by this value
2482 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2483 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2486 # Claim data virtual vectors
2487 # This option will cause the data virtual vectors
2488 # to be claimed. At present there is only one, used
2489 # by the RedBoot ethernet driver to share diag output.
2491 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2493 # No user value, uncomment the following line to provide one.
2495 # value_source default
2496 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2497 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2498 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2501 # The following properties are affected by this value
2502 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2503 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2506 # Claim comms virtual vectors
2507 # This option will cause the communication tables
2508 # that are part of the virtual vectors mechanism to
2509 # be claimed. Note that doing this may cause an
2510 # existing ROM monitor communication connection to
2511 # be closed. For this reason, the option is disabled
2512 # per default for normal application
2515 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2517 # No user value, uncomment the following line to provide one.
2519 # value_source default
2520 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2521 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2522 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2525 # The following properties are affected by this value
2526 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2527 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2528 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2529 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2530 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2531 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2532 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2533 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2536 # Do diagnostic IO via virtual vector table
2537 # All HAL IO happens via the virtual vector table / comm
2538 # tables when those tables are supported by the HAL.
2539 # If so desired, the low-level IO functions can
2540 # still be provided by the RAM application by
2541 # enabling the CLAIM_COMMS option.
2543 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2544 # Calculated value: 1
2548 # The following properties are affected by this value
2549 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2550 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2551 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2552 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2556 # Behave as a ROM monitor
2557 # Enable this option if this program is to be used as a ROM monitor,
2558 # i.e. applications will be loaded into RAM on the TX27 module, and this
2559 # ROM monitor may process exceptions or interrupts generated from the
2560 # application. This enables features such as utilizing a separate
2561 # interrupt stack when exceptions are generated.
2563 cdl_option CYGSEM_HAL_ROM_MONITOR {
2565 # No user value, uncomment the following line to provide one.
2567 # The inferred value should not be edited directly.
2569 # value_source inferred
2571 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2572 # CYG_HAL_STARTUP == ROMRAM
2573 # CYG_HAL_STARTUP == ROMRAM
2576 # The following properties are affected by this value
2577 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2578 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2579 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2580 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2581 # option CYGPRI_REDBOOT_ROM_MONITOR
2582 # Requires: CYGSEM_HAL_ROM_MONITOR
2585 # Work with a ROM monitor
2586 # Support can be enabled for different varieties of ROM monitor.
2587 # This support changes various eCos semantics such as the encoding
2588 # of diagnostic output, or the overriding of hardware interrupt
2590 # Firstly there is "Generic" support which prevents the HAL
2591 # from overriding the hardware vectors that it does not use, to
2592 # instead allow an installed ROM monitor to handle them. This is
2593 # the most basic support which is likely to be common to most
2594 # implementations of ROM monitor.
2595 # "GDB_stubs" provides support when GDB stubs are included in
2596 # the ROM monitor or boot ROM.
2598 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2600 # No user value, uncomment the following line to provide one.
2602 # value_source default
2603 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2604 # CYG_HAL_STARTUP == ROMRAM
2606 # Legal values: "Generic" "GDB_stubs"
2607 # Requires: CYG_HAL_STARTUP == "RAM"
2608 # CYG_HAL_STARTUP == ROMRAM
2611 # The following properties are affected by this value
2612 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2613 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2614 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2615 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2616 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2617 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2618 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2619 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2623 # Platform defined I/O channels.
2624 # Platforms which provide additional I/O channels can implement
2625 # this interface, indicating that the function plf_if_init()
2626 # needs to be called.
2628 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2629 # No options implement this inferface
2630 # This value cannot be modified here.
2635 # Platform IDE I/O support.
2636 # Platforms which provide IDE controllers can implement
2637 # this interface, indicating that IDE I/O macros are
2640 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2641 # No options implement this inferface
2642 # This value cannot be modified here.
2646 # The following properties are affected by this value
2647 # component CYGSEM_REDBOOT_DISK_IDE
2648 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2651 # File I/O operations via GDB
2652 # This option enables support for various file I/O
2653 # operations using the GDB remote protocol to communicate
2654 # with GDB. The operations are then performed on the
2655 # debugging host by proxy. These operations are only
2656 # currently available by using a system call interface
2657 # to RedBoot. This may change in the future.
2659 cdl_option CYGPKG_HAL_GDB_FILEIO {
2660 # This option is not active
2661 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2662 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2666 # No user value, uncomment the following line to provide one.
2668 # value_source default
2670 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2671 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2675 # Build Compiler sanity checking tests
2676 # Enabling this option causes compiler tests to be built.
2678 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2680 # No user value, uncomment the following line to provide one.
2682 # value_source default
2685 # The following properties are affected by this value
2686 # component CYGPKG_HAL_TESTS
2687 # Calculated: "tests/context tests/basic"
2688 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2689 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2690 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2694 # This option specifies the set of tests for the common HAL.
2696 cdl_component CYGPKG_HAL_TESTS {
2697 # Calculated value: "tests/context tests/basic"
2698 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2699 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2700 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2701 # CYGINT_HAL_TESTS_NO_CACHES == 0
2702 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2703 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2705 # Current_value: tests/context tests/basic tests/cache tests/intr
2709 # Interface for cache presence
2710 # Some architectures and/or platforms do not have caches. By
2711 # implementing this interface, these can disable the various
2712 # cache-related tests.
2714 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2715 # No options implement this inferface
2716 # This value cannot be modified here.
2718 # Current value: 0 0
2720 # The following properties are affected by this value
2721 # component CYGPKG_HAL_TESTS
2722 # Calculated: "tests/context tests/basic"
2723 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2724 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2725 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2730 # The ARM architecture HAL package provides generic
2731 # support for this processor architecture. It is also
2732 # necessary to select a specific target platform HAL
2735 cdl_package CYGPKG_HAL_ARM {
2736 # Packages cannot be added or removed, nor can their version be changed,
2737 # simply by editing their value. Instead the appropriate configuration
2738 # should be used to perform these actions.
2740 # This value cannot be modified here.
2742 # Current value: 1 current
2744 # The following properties are affected by this value
2745 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2746 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2747 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2748 # ActiveIf: CYGPKG_HAL_ARM
2752 # The CPU architecture supports THUMB mode
2754 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2755 # No options implement this inferface
2756 # This value cannot be modified here.
2760 # The following properties are affected by this value
2761 # option CYGHWR_THUMB
2762 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2763 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2764 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2767 # Enable Thumb instruction set
2768 # Enable use of the Thumb instruction set.
2770 cdl_option CYGHWR_THUMB {
2771 # This option is not active
2772 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2773 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2777 # No user value, uncomment the following line to provide one.
2779 # value_source default
2782 # The following properties are affected by this value
2783 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2784 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2787 # Enable Thumb interworking compiler option
2788 # This option controls the use of -mthumb-interwork in the
2789 # compiler flags. It defaults enabled in Thumb or ROM monitor
2790 # configurations, but can be overridden for reduced memory
2791 # footprint where interworking is not a requirement.
2793 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2794 # This option is not active
2795 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2796 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2800 # No user value, uncomment the following line to provide one.
2802 # value_source default
2803 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # CYGSEM_HAL_ROM_MONITOR == 1
2809 # The platform and architecture supports Big Endian operation
2811 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2812 # No options implement this inferface
2813 # This value cannot be modified here.
2817 # The following properties are affected by this value
2818 # option CYGHWR_HAL_ARM_BIGENDIAN
2819 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2822 # Use big-endian mode
2823 # Use the CPU in big-endian mode.
2825 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2826 # This option is not active
2827 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2828 # CYGINT_HAL_ARM_BIGENDIAN == 0
2832 # No user value, uncomment the following line to provide one.
2834 # value_source default
2838 # The platform uses a processor with an ARM7 core
2840 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2841 # No options implement this inferface
2842 # This value cannot be modified here.
2846 # The following properties are affected by this value
2847 # option CYGHWR_HAL_ARM_CPU_FAMILY
2848 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2849 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2850 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2851 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2853 # option CYGHWR_HAL_ARM_CPU_FAMILY
2854 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2855 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2856 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2857 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2861 # The platform uses a processor with an ARM9 core
2863 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2864 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2865 # This value cannot be modified here.
2869 # The following properties are affected by this value
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2876 # option CYGHWR_HAL_ARM_CPU_FAMILY
2877 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2878 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2879 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2880 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2884 # The platform uses a processor with a StrongARM core
2886 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2887 # No options implement this inferface
2888 # This value cannot be modified here.
2892 # The following properties are affected by this value
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2899 # option CYGHWR_HAL_ARM_CPU_FAMILY
2900 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2901 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2902 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2903 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2907 # The platform uses a processor with a XScale core
2909 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2910 # No options implement this inferface
2911 # This value cannot be modified here.
2915 # The following properties are affected by this value
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2922 # option CYGHWR_HAL_ARM_CPU_FAMILY
2923 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2924 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2925 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2926 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2931 # It is possible to optimize code for different
2932 # ARM CPU families. This option selects which CPU to
2933 # optimize for on boards that support multiple CPU types.
2935 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2937 # No user value, uncomment the following line to provide one.
2939 # value_source default
2940 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2945 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2946 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2947 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2948 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2950 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2951 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2952 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2953 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2955 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2956 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2957 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2958 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2961 # Provide diagnostic dump for exceptions
2962 # Print messages about hardware exceptions, including
2963 # raw exception frame dump and register contents.
2965 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2967 # No user value, uncomment the following line to provide one.
2969 # value_source default
2971 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2972 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2976 # Process all exceptions with the eCos application
2977 # Normal RAM-based programs which do not include GDB stubs
2978 # defer processing of the illegal instruction exception to GDB.
2979 # Setting this options allows the program to explicitly handle
2980 # the illegal instruction exception itself. Note: this will
2981 # prevent the use of GDB to debug the application as breakpoints
2982 # will no longer work.
2984 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2986 # No user value, uncomment the following line to provide one.
2988 # value_source default
2992 # Support GDB thread operations via ICE/Multi-ICE
2993 # Allow GDB to get thread information via the ICE/Multi-ICE
2996 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2998 # No user value, uncomment the following line to provide one.
3000 # value_source default
3002 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3003 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3005 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3006 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3008 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3009 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3013 # Support for 'gprof' callbacks
3014 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3015 # to acquire the interrupt-context PC and SP, when this option is
3018 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3019 # This option is not active
3020 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3021 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3023 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3025 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3028 # Calculated value: 1
3033 # Accept exceptions and irq's occurring in user mode
3034 # For standalone Redboot based programs running in user mode.
3036 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3038 # No user value, uncomment the following line to provide one.
3040 # value_source default
3044 # Preserve svc spsr before returning to svc mode
3045 # This option secures exception and breakpoint processing
3046 # triggered during execution of application specific SWI
3049 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3051 # No user value, uncomment the following line to provide one.
3053 # value_source default
3059 cdl_option CYGBLD_LINKER_SCRIPT {
3060 # Calculated value: "src/arm.ld"
3062 # Current_value: src/arm.ld
3065 # Implementations of hal_arm_mem_real_region_top()
3067 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3068 # No options implement this inferface
3069 # This value cannot be modified here.
3074 # Freescale SoC architecture
3075 # This HAL variant package provides generic
3076 # support for the Freescale SoC. It is also
3077 # necessary to select a specific target platform HAL
3080 cdl_package CYGPKG_HAL_ARM_MX27 {
3081 # Packages cannot be added or removed, nor can their version be changed,
3082 # simply by editing their value. Instead the appropriate configuration
3083 # should be used to perform these actions.
3085 # This value cannot be modified here.
3087 # Current value: 1 current
3089 # The following properties are affected by this value
3094 # The processor can run at various frequencies.
3095 # These values are expressed in KHz. Note that there are
3096 # several steppings of the rate to run at different
3097 # maximum frequencies. Check the specs to make sure that your
3098 # particular processor can run at the rate you select here.
3100 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3102 # No user value, uncomment the following line to provide one.
3103 # user_value 26000000
3104 # value_source default
3105 # Default value: 26000000
3106 # Legal values: 26000000 27000000 33554432 32768000
3109 # Processor clock rate
3110 # The processor can run at various frequencies.
3111 # These values are expressed in KHz. Note that there are
3112 # several steppings of the rate to run at different
3113 # maximum frequencies. Check the specs to make sure that your
3114 # particular processor can run at the rate you select here.
3116 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3118 # No user value, uncomment the following line to provide one.
3120 # value_source default
3121 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3122 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3123 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3124 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3126 # Legal values: 266 399
3129 # System clock (hclk) rate
3130 # The processor can run at various frequencies.
3131 # These values are expressed in KHz. Note that there are
3132 # several steppings of the rate to run at different
3133 # maximum frequencies. Check the specs to make sure that your
3134 # particular processor can run at the rate you select here.
3136 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3138 # No user value, uncomment the following line to provide one.
3140 # value_source default
3141 # Default value: 133
3142 # Legal values: 133 100
3145 # Real-time clock constants
3147 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3148 # There is no associated value.
3152 # Real-time clock numerator
3154 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3155 # Calculated value: 1000000000
3157 # Current_value: 1000000000
3160 # Real-time clock denominator
3161 # This option selects the heartbeat rate for the real-time clock.
3162 # The rate is specified in ticks per second. Change this value
3163 # with caution - too high and your system will become saturated
3164 # just handling clock interrupts, too low and some operations
3165 # such as thread scheduling may become sluggish.
3167 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3169 # No user value, uncomment the following line to provide one.
3171 # value_source default
3172 # Default value: 100
3174 # The following properties are affected by this value
3175 # option CYGNUM_HAL_RTC_PERIOD
3176 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3179 # Real-time clock period
3181 cdl_option CYGNUM_HAL_RTC_PERIOD {
3182 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3183 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3185 # Current_value: 36864
3189 # UART1 available as diagnostic/debug channel
3190 # The chip has multiple serial channels which may be
3191 # used for different things on different platforms. This
3192 # interface allows a platform to indicate that the specified
3193 # serial port can be used as a diagnostic and/or debug channel.
3195 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3196 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3197 # This value cannot be modified here.
3201 # The following properties are affected by this value
3204 # UART2 available as diagnostic/debug channel
3205 # The chip has multiple serial channels which may be
3206 # used for different things on different platforms. This
3207 # interface allows a platform to indicate that the specified
3208 # serial port can be used as a diagnostic and/or debug channel.
3210 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3211 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3212 # This value cannot be modified here.
3216 # The following properties are affected by this value
3219 # UART3 available as diagnostic/debug channel
3220 # The chip has multiple serial channels which may be
3221 # used for different things on different platforms. This
3222 # interface allows a platform to indicate that the specified
3223 # serial port can be used as a diagnostic and/or debug channel.
3225 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3226 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3227 # This value cannot be modified here.
3231 # The following properties are affected by this value
3234 # UART4 available as diagnostic/debug channel
3235 # The chip has multiple serial channels which may be
3236 # used for different things on different platforms. This
3237 # interface allows a platform to indicate that the specified
3238 # serial port can be used as a diagnostic and/or debug channel.
3240 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3241 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3242 # This value cannot be modified here.
3246 # The following properties are affected by this value
3249 # UART5 available as diagnostic/debug channel
3250 # The chip has multiple serial channels which may be
3251 # used for different things on different platforms. This
3252 # interface allows a platform to indicate that the specified
3253 # serial port can be used as a diagnostic and/or debug channel.
3255 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3256 # No options implement this inferface
3257 # This value cannot be modified here.
3262 # UART6 available as diagnostic/debug channel
3263 # The chip has multiple serial channels which may be
3264 # used for different things on different platforms. This
3265 # interface allows a platform to indicate that the specified
3266 # serial port can be used as a diagnostic and/or debug channel.
3268 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3269 # No options implement this inferface
3270 # This value cannot be modified here.
3276 # This HAL platform package provides generic
3277 # support for the Ka-Ro electronics TX27 module.
3279 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3280 # Packages cannot be added or removed, nor can their version be changed,
3281 # simply by editing their value. Instead the appropriate configuration
3282 # should be used to perform these actions.
3284 # This value cannot be modified here.
3286 # Current value: 1 current
3287 # Requires: CYGINT_ISO_CTYPE
3288 # CYGINT_ISO_CTYPE == 1
3290 # Requires: CYGBLD_BUILD_REDBOOT == 1
3291 # CYGBLD_BUILD_REDBOOT == 1
3297 # The only startup type allowed is ROMRAM, since this will allow
3298 # the program to exist in ROM, but be copied to RAM during startup
3299 # which is required to boot from NAND flash.
3301 cdl_component CYG_HAL_STARTUP {
3303 # No user value, uncomment the following line to provide one.
3305 # value_source default
3306 # Default value: ROMRAM
3307 # Legal values: "ROMRAM"
3309 # The following properties are affected by this value
3310 # option CYGSEM_HAL_ROM_MONITOR
3311 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3312 # option CYGSEM_HAL_ROM_MONITOR
3313 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3314 # option CYGSEM_HAL_USE_ROM_MONITOR
3315 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3316 # option CYGSEM_HAL_USE_ROM_MONITOR
3317 # Requires: CYG_HAL_STARTUP == "RAM"
3318 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3319 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3320 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3321 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3322 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3323 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3324 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3325 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3326 # option CYGPRI_REDBOOT_ROM_MONITOR
3327 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3328 # option CYGPRI_REDBOOT_ROM_MONITOR
3329 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3332 # Diagnostic serial port baud rate
3333 # This option selects the baud rate used for the console port.
3334 # Note: this should match the value chosen for the GDB port if the
3335 # console and GDB port are the same.
3337 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3339 # No user value, uncomment the following line to provide one.
3341 # value_source default
3342 # Default value: 115200
3343 # Legal values: 9600 19200 38400 57600 115200
3346 # GDB serial port baud rate
3347 # This option selects the baud rate used for the GDB port.
3348 # Note: this should match the value chosen for the console port if the
3349 # console and GDB port are the same.
3351 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3353 # No user value, uncomment the following line to provide one.
3355 # value_source default
3356 # Default value: 115200
3357 # Legal values: 9600 19200 38400 57600 115200
3360 # Number of communication channels on the TX27
3362 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3363 # Calculated value: 3
3367 # The following properties are affected by this value
3368 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3369 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3370 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3371 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3372 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3373 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3377 # The TX27 provides access to three serial ports. This option
3378 # chooses which port will be used to connect to a host
3381 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3382 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3383 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3387 # No user value, uncomment the following line to provide one.
3389 # value_source default
3391 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3392 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3395 # Default console channel.
3397 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3398 # Calculated value: 0
3401 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3402 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3404 # The following properties are affected by this value
3405 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3406 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3409 # Console serial port
3410 # The TX27 provides access to three serial ports. This option
3411 # chooses which port will be used for console output.
3413 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3414 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3415 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3419 # No user value, uncomment the following line to provide one.
3421 # value_source default
3422 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3423 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3425 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3426 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3429 # Ka-Ro electronics TX27 module build options
3430 # Package specific build options including control over
3431 # compiler flags used only in building this package,
3432 # and details of which tests are built.
3434 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3435 # There is no associated value.
3436 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3437 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3443 # This option specifies the SDRAM size of the TX27 module.
3445 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3447 # No user value, uncomment the following line to provide one.
3448 # user_value 0x04000000
3449 # value_source default
3450 # Default value: 0x04000000
3451 # Legal values: 0x04000000 0x08000000
3454 # Enable low level debugging with LED
3455 # This option enables low level debugging by blink codes
3456 # of the LED on STK5.
3458 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3460 # No user value, uncomment the following line to provide one.
3462 # value_source default
3463 # Default value: false
3464 # false (unknown) == 0
3468 # Additional compiler flags
3469 # This option modifies the set of compiler flags for
3470 # building the TX27 HAL. These flags are used in addition
3471 # to the set of global flags.
3473 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3475 # No user value, uncomment the following line to provide one.
3477 # value_source default
3481 # Suppressed compiler flags
3482 # This option modifies the set of compiler flags for
3483 # building the TX27 HAL. These flags are removed from
3484 # the set of global flags if present.
3486 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3488 # No user value, uncomment the following line to provide one.
3490 # value_source default
3497 cdl_component CYGHWR_MEMORY_LAYOUT {
3498 # Calculated value: "arm_tx27_romram"
3500 # Current_value: arm_tx27_romram
3504 # Memory layout linker script fragment
3506 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3507 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3509 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3512 # Memory layout header file
3514 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3515 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3517 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3526 # Common types and useful macros.
3527 # Tracing and assertion facilities.
3528 # Package startup options.
3530 cdl_package CYGPKG_INFRA {
3531 # Packages cannot be added or removed, nor can their version be changed,
3532 # simply by editing their value. Instead the appropriate configuration
3533 # should be used to perform these actions.
3535 # This value cannot be modified here.
3537 # Current value: 1 current
3539 # The following properties are affected by this value
3540 # package CYGPKG_HAL
3541 # Requires: CYGPKG_INFRA
3542 # component CYGBLD_BUILD_REDBOOT
3543 # Requires: CYGPKG_INFRA
3548 # The eCos source code contains a significant amount of
3549 # internal debugging support, in the form of assertions and
3551 # Assertions check at runtime that various conditions are as
3552 # expected; if not, execution is halted.
3553 # Tracing takes the form of text messages that are output
3554 # whenever certain events occur, or whenever functions are
3556 # The most important property of these checks and messages is
3557 # that they are not required for the program to run.
3558 # It is prudent to develop software with assertions enabled,
3559 # but disable them when making a product release, thus
3560 # removing the overhead of that checking.
3561 # It is possible to enable assertions and tracing
3563 # There are also options controlling the exact behaviour of
3564 # the assertion and tracing facilities, thus giving users
3565 # finer control over the code and data size requirements.
3567 cdl_component CYGPKG_INFRA_DEBUG {
3569 # No user value, uncomment the following line to provide one.
3571 # value_source default
3574 # The following properties are affected by this value
3575 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3576 # ActiveIf: CYGPKG_INFRA_DEBUG
3581 # If this option is defined, asserts in the code are tested.
3582 # Assert functions (CYG_ASSERT()) are defined in
3583 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3584 # If it is not defined, these result in no additional
3585 # object code and no checking of the asserted conditions.
3587 cdl_component CYGDBG_USE_ASSERTS {
3588 # This option is not active
3589 # The parent CYGPKG_INFRA_DEBUG is disabled
3592 # No user value, uncomment the following line to provide one.
3594 # value_source default
3596 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3597 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3600 # The following properties are affected by this value
3601 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3602 # Requires: CYGDBG_USE_ASSERTS
3603 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3604 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3609 # This option allows individual control of preconditions.
3610 # A precondition is one type of assert, which it is
3611 # useful to control separately from more general asserts.
3612 # The function is CYG_PRECONDITION(condition,msg).
3614 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3615 # This option is not active
3616 # The parent CYGDBG_USE_ASSERTS is not active
3619 # No user value, uncomment the following line to provide one.
3621 # value_source default
3626 # This option allows individual control of postconditions.
3627 # A postcondition is one type of assert, which it is
3628 # useful to control separately from more general asserts.
3629 # The function is CYG_POSTCONDITION(condition,msg).
3631 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3632 # This option is not active
3633 # The parent CYGDBG_USE_ASSERTS is not active
3636 # No user value, uncomment the following line to provide one.
3638 # value_source default
3643 # This option allows individual control of loop invariants.
3644 # A loop invariant is one type of assert, which it is
3645 # useful to control separately from more general asserts,
3646 # particularly since a loop invariant is typically evaluated
3647 # a great many times when used correctly.
3648 # The function is CYG_LOOP_INVARIANT(condition,msg).
3650 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3651 # This option is not active
3652 # The parent CYGDBG_USE_ASSERTS is not active
3655 # No user value, uncomment the following line to provide one.
3657 # value_source default
3662 # All assertions within eCos contain a text message
3663 # which should give some information about the condition
3665 # These text messages will end up being embedded in the
3666 # application image and hence there is a significant penalty
3667 # in terms of image size.
3668 # It is possible to suppress the use of these messages by
3669 # disabling this option.
3670 # This results in smaller code size, but there is less
3671 # human-readable information if an assertion actually gets
3674 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3675 # This option is not active
3676 # The parent CYGDBG_USE_ASSERTS is not active
3679 # No user value, uncomment the following line to provide one.
3681 # value_source default
3687 # If this option is defined, tracing operations
3688 # result in output or logging, depending on other options.
3689 # This may have adverse effects on performance, if the time
3690 # taken to output message overwhelms the available CPU
3691 # power or output bandwidth.
3692 # Trace functions (CYG_TRACE()) are defined in
3693 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3694 # If it is not defined, these result in no additional
3695 # object code and no trace information.
3697 cdl_component CYGDBG_USE_TRACING {
3698 # This option is not active
3699 # The parent CYGPKG_INFRA_DEBUG is disabled
3702 # No user value, uncomment the following line to provide one.
3704 # value_source default
3706 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3707 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3710 # The following properties are affected by this value
3711 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3712 # ActiveIf: CYGDBG_USE_TRACING
3713 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3714 # ActiveIf: CYGDBG_USE_TRACING
3715 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3716 # ActiveIf: CYGDBG_USE_TRACING
3717 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3718 # ActiveIf: CYGDBG_USE_TRACING
3719 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3720 # ActiveIf: CYGDBG_USE_TRACING
3724 # Trace function reports
3725 # This option allows individual control of
3726 # function entry/exit tracing, independent of
3727 # more general tracing output.
3728 # This may be useful to remove clutter from a
3731 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3732 # This option is not active
3733 # The parent CYGDBG_USE_TRACING is not active
3734 # The parent CYGDBG_USE_TRACING is disabled
3737 # No user value, uncomment the following line to provide one.
3739 # value_source default
3744 # All trace calls within eCos contain a text message
3745 # which should give some information about the circumstances.
3746 # These text messages will end up being embedded in the
3747 # application image and hence there is a significant penalty
3748 # in terms of image size.
3749 # It is possible to suppress the use of these messages by
3750 # disabling this option.
3751 # This results in smaller code size, but there is less
3752 # human-readable information available in the trace output,
3753 # possibly only filenames and line numbers.
3755 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3756 # This option is not active
3757 # The parent CYGDBG_USE_TRACING is not active
3758 # The parent CYGDBG_USE_TRACING is disabled
3761 # No user value, uncomment the following line to provide one.
3763 # value_source default
3768 # Trace output implementations
3770 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3771 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3772 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3773 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3774 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3775 # This option is not active
3776 # The parent CYGPKG_INFRA_DEBUG is disabled
3778 # This value cannot be modified here.
3782 # The following properties are affected by this value
3783 # component CYGDBG_USE_ASSERTS
3784 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3785 # component CYGDBG_USE_TRACING
3786 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3790 # A null output module which is useful when
3791 # debugging interactively; the output routines
3792 # can be breakpointed rather than have them actually
3793 # 'print' something.
3795 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3796 # This option is not active
3797 # The parent CYGPKG_INFRA_DEBUG is disabled
3800 # No user value, uncomment the following line to provide one.
3802 # value_source default
3807 # An output module which produces simple output
3808 # from tracing and assertion events.
3810 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3811 # This option is not active
3812 # The parent CYGPKG_INFRA_DEBUG is disabled
3815 # No user value, uncomment the following line to provide one.
3817 # value_source default
3822 # An output module which produces fancy output
3823 # from tracing and assertion events.
3825 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3826 # This option is not active
3827 # The parent CYGPKG_INFRA_DEBUG is disabled
3830 # No user value, uncomment the following line to provide one.
3832 # value_source default
3837 # An output module which buffers output
3838 # from tracing and assertion events. The stored
3839 # messages are output when an assert fires, or
3840 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3842 # Of course, there will only be stored messages
3843 # if tracing per se (CYGDBG_USE_TRACING)
3846 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3847 # This option is not active
3848 # The parent CYGPKG_INFRA_DEBUG is disabled
3851 # No user value, uncomment the following line to provide one.
3853 # value_source default
3859 # The size of the trace buffer. This counts the number
3860 # of trace records stored. When the buffer fills it
3861 # either wraps, stops recording, or generates output.
3863 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3864 # This option is not active
3865 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3866 # ActiveIf constraint: CYGDBG_USE_TRACING
3867 # CYGDBG_USE_TRACING == 0
3871 # No user value, uncomment the following line to provide one.
3873 # value_source default
3875 # Legal values: 5 to 65535
3878 # Wrap trace buffer when full
3879 # When the trace buffer has filled with records it
3880 # starts again at the beginning. Hence only the last
3881 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3884 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3885 # This option is not active
3886 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3887 # ActiveIf constraint: CYGDBG_USE_TRACING
3888 # CYGDBG_USE_TRACING == 0
3892 # No user value, uncomment the following line to provide one.
3894 # value_source default
3898 # Halt trace buffer when full
3899 # When the trace buffer has filled with records it
3900 # stops recording. Hence only the first
3901 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3904 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3905 # This option is not active
3906 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3907 # ActiveIf constraint: CYGDBG_USE_TRACING
3908 # CYGDBG_USE_TRACING == 0
3912 # No user value, uncomment the following line to provide one.
3914 # value_source default
3918 # Print trace buffer when full
3919 # When the trace buffer has filled with records it
3920 # prints the contents of the buffer. The buffer is then
3921 # emptied and the system continues.
3923 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3924 # This option is not active
3925 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3926 # ActiveIf constraint: CYGDBG_USE_TRACING
3927 # CYGDBG_USE_TRACING == 0
3931 # No user value, uncomment the following line to provide one.
3933 # value_source default
3937 # Print trace buffer on assert fail
3938 # When an assertion fails the trace buffer will be
3939 # printed to the default diagnostic device.
3941 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3942 # This option is not active
3943 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3944 # ActiveIf constraint: CYGDBG_USE_TRACING
3945 # CYGDBG_USE_TRACING == 0
3949 # No user value, uncomment the following line to provide one.
3951 # value_source default
3956 # Use function names
3957 # All trace and assert calls within eCos contain a
3958 # reference to the builtin macro '__PRETTY_FUNCTION__',
3959 # which evaluates to a string containing
3960 # the name of the current function.
3961 # This is useful when reading a trace log.
3962 # It is possible to suppress the use of the function name
3963 # by disabling this option.
3964 # This results in smaller code size, but there is less
3965 # human-readable information available in the trace output,
3966 # possibly only filenames and line numbers.
3968 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3969 # This option is not active
3970 # The parent CYGPKG_INFRA_DEBUG is disabled
3973 # No user value, uncomment the following line to provide one.
3975 # value_source default
3981 # Some packages require a startup routine to be called.
3982 # This can be carried out by application code, by supplying
3983 # a routine called cyg_package_start() which calls the
3984 # appropriate package startup routine(s).
3985 # Alternatively, this routine can be constructed automatically
3986 # and configured to call the startup routines of your choice.
3988 cdl_component CYGPKG_INFRA_STARTUP {
3989 # There is no associated value.
3993 # Start uITRON subsystem
3994 # Generate a call to initialize the
3995 # uITRON compatibility subsystem
3996 # within the system version of cyg_package_start().
3997 # This enables compatibility with uITRON.
3998 # You must configure uITRON with the correct tasks before
3999 # starting the uItron subsystem.
4000 # If this is disabled, and you want to use uITRON,
4001 # you must call cyg_uitron_start() from your own
4002 # cyg_package_start() or cyg_userstart().
4004 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4005 # This option is not active
4006 # ActiveIf constraint: CYGPKG_UITRON
4007 # CYGPKG_UITRON (unknown) == 0
4011 # No user value, uncomment the following line to provide one.
4013 # value_source default
4015 # Requires: CYGPKG_UITRON
4016 # CYGPKG_UITRON (unknown) == 0
4021 # Smaller slower memcpy()
4022 # Enabling this option causes the implementation of
4023 # the standard memcpy() routine to reduce code
4024 # size at the expense of execution speed. This
4025 # option is automatically enabled with the use of
4026 # the -Os option to the compiler. Also note that
4027 # the compiler will try to use its own builtin
4028 # version of memcpy() if possible, ignoring the
4029 # implementation in this package, unless given
4030 # the -fno-builtin compiler option.
4032 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4034 # No user value, uncomment the following line to provide one.
4036 # value_source default
4040 # Smaller slower memset()
4041 # Enabling this option causes the implementation of
4042 # the standard memset() routine to reduce code
4043 # size at the expense of execution speed. This
4044 # option is automatically enabled with the use of
4045 # the -Os option to the compiler. Also note that
4046 # the compiler will try to use its own builtin
4047 # version of memset() if possible, ignoring the
4048 # implementation in this package, unless given
4049 # the -fno-builtin compiler option.
4051 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4053 # No user value, uncomment the following line to provide one.
4055 # value_source default
4059 # Provide empty C++ delete functions
4060 # To deal with virtual destructors, where the correct delete()
4061 # function must be called for the derived class in question, the
4062 # underlying delete is called when needed, from destructors. This
4063 # is regardless of whether the destructor is called by delete itself.
4064 # So there is a reference to delete() from all destructors. The
4065 # default builtin delete() attempts to call free() if there is
4066 # one defined. So, if you have destructors, and you have free(),
4067 # as in malloc() and free(), any destructor counts as a reference
4068 # to free(). So the dynamic memory allocation code is linked
4069 # in regardless of whether it gets explicitly called. This
4070 # increases code and data size needlessly.
4071 # To defeat this undesirable behaviour, we define empty versions
4072 # of delete and delete. But doing this prevents proper use
4073 # of dynamic memory in C++ programs via C++'s new and delete
4075 # Therefore, this option is provided
4076 # for explicitly disabling the provision of these empty functions,
4077 # so that new and delete can be used, if that is what is required.
4079 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4081 # No user value, uncomment the following line to provide one.
4083 # value_source default
4087 # Threshold for valid number of delete calls
4088 # Some users don't know about the empty delete function and then
4089 # wonder why their C++ classes are leaking memory. If
4090 # INFRA_DEBUG is enabled we keep a counter for the number of
4091 # times delete is called. If it goes above this threshold we throw
4092 # an assertion failure. This should point heavy users of
4093 # delete in the right direction without upsetting those who want
4094 # an empty delete function.
4096 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4097 # This option is not active
4098 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4099 # CYGPKG_INFRA_DEBUG == 0
4103 # No user value, uncomment the following line to provide one.
4105 # value_source default
4106 # Default value: 100
4109 # Provide dummy abort() function
4110 # This option controls the inclusion of a dummy abort() function.
4111 # Parts of the C and C++ compiler runtime systems contain references
4112 # to abort(), particulary in the C++ exception handling code. It is
4113 # not possible to eliminate these references, so this dummy function
4114 # in included to satisfy them. It is not expected that this function
4115 # will ever be called, so its current behaviour is to simply loop.
4117 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4119 # No user value, uncomment the following line to provide one.
4121 # value_source default
4122 # Default value: CYGINT_ISO_EXIT == 0
4123 # CYGINT_ISO_EXIT == 0
4125 # Requires: !CYGINT_ISO_EXIT
4126 # CYGINT_ISO_EXIT == 0
4130 # Reset platform at end of test case execution
4131 # If this option is set then test case programs will reset the platform
4132 # when they terminate, as opposed to the default which is to just hang
4135 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4137 # No user value, uncomment the following line to provide one.
4139 # value_source default
4143 # Provide dummy strlen() function
4144 # This option controls the inclusion of a dummy strlen() function.
4145 # Parts of the C and C++ compiler runtime systems contain references
4146 # to strlen(), particulary in the C++ exception handling code. It is
4147 # not possible to eliminate these references, so this dummy function
4148 # in included to satisfy them. While it is not expected that this function
4149 # will ever be called, it is functional but uses the simplest, smallest
4150 # algorithm. There is a faster version of strlen() in the C library.
4152 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4154 # No user value, uncomment the following line to provide one.
4156 # value_source default
4157 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4158 # CYGINT_ISO_STRING_STRFUNCS == 1
4160 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4161 # CYGINT_ISO_STRING_STRFUNCS == 1
4165 # Make all compiler warnings show as errors
4166 # Enabling this option will cause all compiler warnings to show
4167 # as errors and bring the library build to a halt. This is used
4168 # to ensure that the code base is warning free, and thus ensure
4169 # that newly introduced warnings stand out and get fixed before
4170 # they show up as weird run-time behavior.
4172 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4177 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4178 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4181 # The following properties are affected by this value
4182 # option CYGBLD_GLOBAL_CFLAGS
4183 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4186 # Make compiler and assembler communicate by pipe
4187 # Enabling this option will cause the compiler to feed the
4188 # assembly output the the assembler via a pipe instead of
4189 # via a temporary file. This normally reduces the build
4192 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4197 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4198 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4202 # Infra build options
4203 # Package specific build options including control over
4204 # compiler flags used only in building this package.
4206 cdl_component CYGPKG_INFRA_OPTIONS {
4207 # There is no associated value.
4211 # Additional compiler flags
4212 # This option modifies the set of compiler flags for
4213 # building the eCos infra package. These flags are used
4214 # in addition to the set of global flags.
4216 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4218 # No user value, uncomment the following line to provide one.
4219 # user_value "-fno-rtti -Woverloaded-virtual"
4220 # value_source default
4221 # Default value: "-fno-rtti -Woverloaded-virtual"
4224 # Suppressed compiler flags
4225 # This option modifies the set of compiler flags for
4226 # building the eCos infra package. These flags are removed from
4227 # the set of global flags if present.
4229 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4231 # No user value, uncomment the following line to provide one.
4232 # user_value -Wno-pointer-sign
4233 # value_source default
4234 # Default value: -Wno-pointer-sign
4237 # Suppressed linker flags
4238 # This option modifies the set of linker flags for
4239 # building the eCos infra package tests. These flags are removed from
4240 # the set of global flags if present.
4242 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4244 # No user value, uncomment the following line to provide one.
4245 # user_value -Wl,--gc-sections
4246 # value_source default
4247 # Default value: -Wl,--gc-sections
4250 # Additional linker flags
4251 # This option modifies the set of linker flags for
4252 # building the eCos infra package tests. These flags are added to
4253 # the set of global flags if present.
4255 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4257 # No user value, uncomment the following line to provide one.
4258 # user_value -Wl,--fatal-warnings
4259 # value_source default
4260 # Default value: -Wl,--fatal-warnings
4263 # Infra package tests
4265 cdl_component CYGPKG_INFRA_TESTS {
4266 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4268 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4272 # Number of times a test runs
4273 # This option controls the number of times tests will execute their
4274 # basic function. Not all tests will honor this setting, but those
4275 # that do will execute the test N times before terminating. A value
4276 # less than 0 indicates to run forever.
4278 cdl_option CYGNUM_TESTS_RUN_COUNT {
4280 # No user value, uncomment the following line to provide one.
4282 # value_source default
4289 # Redboot ROM monitor
4290 # doc: ref/redboot.html
4291 # This package supports the Redboot [stand-alone debug monitor]
4292 # using eCos as the underlying board support mechanism.
4294 cdl_package CYGPKG_REDBOOT {
4295 # Packages cannot be added or removed, nor can their version be changed,
4296 # simply by editing their value. Instead the appropriate configuration
4297 # should be used to perform these actions.
4299 # This value cannot be modified here.
4301 # Current value: 1 current
4302 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4303 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4306 # The following properties are affected by this value
4307 # component CYGPKG_REDBOOT_ARM_OPTIONS
4308 # ActiveIf: CYGPKG_REDBOOT
4309 # component CYGPKG_REDBOOT_HAL_OPTIONS
4310 # ActiveIf: CYGPKG_REDBOOT
4311 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4312 # ActiveIf: CYGPKG_REDBOOT
4313 # option CYGSEM_IO_ETH_DRIVERS_WARN
4314 # ActiveIf: CYGPKG_REDBOOT
4318 # Include support for ELF file format
4320 cdl_component CYGSEM_REDBOOT_ELF {
4322 # No user value, uncomment the following line to provide one.
4324 # value_source default
4329 # Use the virtual address in the ELF headers
4330 # The ELF headers contain both a virtual and a physical address
4331 # for where code/data should be loaded. By default the physical
4332 # address is used but sometimes it is necassary to use the
4333 # virtual address because of bugy toolchains
4335 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4337 # No user value, uncomment the following line to provide one.
4339 # value_source default
4344 # Methods of loading images using redboot
4346 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4347 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4348 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4349 # This value cannot be modified here.
4353 # The following properties are affected by this value
4354 # component CYGBLD_BUILD_REDBOOT
4355 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4358 # Build Redboot ROM ELF image
4359 # This option enables the building of the Redboot ELF image.
4360 # The image may require further relocation or symbol
4361 # stripping before being converted to a binary image.
4362 # This is handled by a rule in the target CDL.
4364 cdl_component CYGBLD_BUILD_REDBOOT {
4366 # No user value, uncomment the following line to provide one.
4368 # The inferred value should not be edited directly.
4370 # value_source inferred
4372 # Requires: CYGPKG_INFRA
4373 # CYGPKG_INFRA == current
4375 # Requires: CYGPKG_ISOINFRA
4376 # CYGPKG_ISOINFRA == current
4378 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4379 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4381 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4382 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4384 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4385 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4387 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4388 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4390 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4391 # CYGINT_ISO_STRING_MEMFUNCS == 1
4393 # Requires: CYGINT_ISO_STRING_STRFUNCS
4394 # CYGINT_ISO_STRING_STRFUNCS == 1
4396 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4397 # CYGINT_REDBOOT_LOAD_METHOD == 2
4400 # The following properties are affected by this value
4401 # package CYGPKG_HAL_ARM_TX27KARO
4402 # Requires: CYGBLD_BUILD_REDBOOT == 1
4403 # option CYGBLD_BUILD_REDBOOT_BIN
4404 # ActiveIf: CYGBLD_BUILD_REDBOOT
4408 # Include GDB support in RedBoot
4409 # RedBoot normally includes support for the GDB debugging
4410 # protocols. This option allows this to be disabled which
4411 # may yield a substantial savings in terms of code and memory
4414 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4415 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4416 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4423 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4424 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4426 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4427 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4431 # Threads debugging support
4432 # Enabling this option will include special code in the
4433 # GDB stubs to support debugging of threaded programs. In
4434 # the case of eCos programs, this support allows GDB to
4435 # have complete access to the eCos threads in the
4438 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4439 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4440 # CYG_HAL_STARTUP == ROMRAM
4444 # No user value, uncomment the following line to provide one.
4446 # value_source default
4448 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4449 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4453 # Customized version string
4454 # Use this option to define a customized version "string" for
4455 # RedBoot. Note: this value is only cosmetic, displayed by the
4456 # "version" command, but is useful for providing site specific
4457 # information about the RedBoot configuration.
4459 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4461 # No user value, uncomment the following line to provide one.
4463 # The inferred value should not be edited directly.
4464 inferred_value 1 "Ka-Ro 2009-06-10"
4465 # value_source inferred
4466 # Default value: 0 0
4469 # Enable command line editing
4470 # If this option is non-zero, RedBoot will remember the
4471 # last N command lines. These lines may be reused.
4472 # Enabling this history will also enable rudimentary
4473 # editting of the lines themselves.
4475 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4477 # No user value, uncomment the following line to provide one.
4479 # value_source default
4482 # The following properties are affected by this value
4483 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4484 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4485 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4486 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4489 # Enable command line editing using ANSI arrows, etc
4490 # If this option is enabled, RedBoot will accept standard ANSI key
4491 # sequences for cursor movement (along with the emacs style keys).
4493 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4494 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4495 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4499 # No user value, uncomment the following line to provide one.
4501 # value_source default
4505 # Enable history command and expansion
4506 # Enabling this option will allow RedBoot to provide a
4507 # history command to list previous commands. Also enables
4508 # history expansion via '!' character similar to bash
4511 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4513 # No user value, uncomment the following line to provide one.
4515 # value_source default
4517 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4518 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4522 # Number of unique RAM segments on platform
4523 # Change this option to be the number of memory segments which are
4524 # supported by the platform. If the value is greater than 1, then
4525 # a platform specific function must provide information about the
4526 # additional segments.
4528 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4530 # No user value, uncomment the following line to provide one.
4532 # value_source default
4536 # Include support gzip/zlib decompression
4538 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4539 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4540 # CYGPKG_COMPRESS_ZLIB == current
4544 # No user value, uncomment the following line to provide one.
4546 # value_source default
4549 # The following properties are affected by this value
4550 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4551 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4555 # Size of zlib decompression buffer
4556 # This is the size of the buffer filled with incoming data
4557 # during load before calls are made to the decompressor
4558 # function. For ethernet downloads this can be made bigger
4559 # (at the cost of memory), but for serial downloads on slow
4560 # processors it may be necessary to reduce the size to
4561 # avoid serial overruns. zlib appears to bail out if less
4562 # than five bytes are available initially so this is the
4565 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4567 # No user value, uncomment the following line to provide one.
4569 # value_source default
4571 # Legal values: 5 to 256
4574 # Support compression of Flash images
4575 # This CDL indicates whether flash images can
4576 # be decompressed from gzip/zlib format into RAM.
4578 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4579 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4580 # CYGPKG_REDBOOT_FLASH == 1
4582 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4583 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4584 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4587 # Calculated value: 1
4592 # Include GZIP uncompress command
4593 # Enable this option to include a 'gunzip' command
4594 # to uncompress GZIP compressed data.
4596 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4598 # No user value, uncomment the following line to provide one.
4600 # value_source default
4604 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4605 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4607 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4609 # No user value, uncomment the following line to provide one.
4611 # The inferred value should not be edited directly.
4613 # value_source inferred
4616 # The following properties are affected by this value
4617 # option CYGPRI_REDBOOT_ZLIB_FLASH
4618 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4622 # Include support for xyzModem downloads
4623 # doc: ref/download-command.html
4625 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4627 # No user value, uncomment the following line to provide one.
4629 # value_source default
4632 # The following properties are affected by this value
4633 # option CYGPKG_REDBOOT_CFLAGS_ADD
4634 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4637 # Additional compiler flags
4638 # This option modifies the set of compiler flags for
4639 # building the eCos infra package. These flags are used
4640 # in addition to the set of global flags.
4642 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4643 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4644 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4648 # No user value, uncomment the following line to provide one.
4649 # user_value -Wno-inline
4650 # value_source default
4651 # Default value: -Wno-inline
4654 # Allow the load-command write into Flash.
4655 # Write images direct to Flash via the load command.
4656 # We assume anything which is invalid RAM is flash, hence
4657 # the requires statement
4659 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4660 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4661 # CYGPKG_REDBOOT_FLASH == 1
4665 # No user value, uncomment the following line to provide one.
4667 # value_source default
4669 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4670 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4674 # Include MS Windows CE support
4675 # doc: ref/wince.html
4676 # This option enables MS Windows CE EShell support
4677 # and Windows CE .BIN images support
4679 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4686 # Include support for MXC USB downloads
4688 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4690 # No user value, uncomment the following line to provide one.
4692 # value_source default
4696 # Include support for i.MX USB OTG downloads
4698 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4700 # No user value, uncomment the following line to provide one.
4702 # value_source default
4706 # Include POSIX checksum command
4707 # doc: ref/cksum-command.html
4709 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4711 # No user value, uncomment the following line to provide one.
4713 # value_source default
4717 # Include memory fill command
4718 # doc: ref/mfill-command.html
4720 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4722 # No user value, uncomment the following line to provide one.
4724 # value_source default
4728 # Include memory compare command
4729 # doc: ref/mcmp-command.html
4731 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4733 # No user value, uncomment the following line to provide one.
4735 # value_source default
4739 # Include memory copy command
4740 # doc: ref/mcopy-command.html
4742 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4744 # No user value, uncomment the following line to provide one.
4746 # value_source default
4750 # Include memory dump command
4751 # doc: ref/dump-command.html
4753 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4755 # No user value, uncomment the following line to provide one.
4757 # value_source default
4761 # Include cache command
4762 # doc: ref/cache-command.html
4764 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4766 # No user value, uncomment the following line to provide one.
4768 # value_source default
4772 # Include exec command
4773 # doc: ref/exec-command.html
4775 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4777 # No user value, uncomment the following line to provide one.
4779 # value_source default
4782 # The following properties are affected by this value
4783 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4784 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4787 # Include I/O Memory commands 'iopeek' and 'iopoke'
4789 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4791 # No user value, uncomment the following line to provide one.
4793 # value_source default
4797 # Granularity of timer/ticks
4798 # This option controls the granularity of the timers.
4799 # Faster CPUs can afford higher granularity (lower values)
4800 # which should give higher network performance since the stack
4803 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4805 # No user value, uncomment the following line to provide one.
4807 # value_source default
4808 # Default value: 250
4809 # Legal values: 10 25 50 100 250 500 1000
4812 # Redboot Networking
4813 # This option includes networking support in RedBoot.
4815 cdl_component CYGPKG_REDBOOT_NETWORKING {
4816 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4817 # CYGPKG_IO_ETH_DRIVERS == current
4821 # No user value, uncomment the following line to provide one.
4823 # value_source default
4826 # The following properties are affected by this value
4827 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4828 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4832 # Print net debug information
4833 # This option is overriden by the configuration stored
4836 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4838 # No user value, uncomment the following line to provide one.
4840 # value_source default
4844 # Support TFTP for download
4845 # This option enables the use of the TFTP protocol for
4848 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4850 # No user value, uncomment the following line to provide one.
4852 # value_source default
4856 # Support HTTP for download
4857 # This option enables the use of the HTTP protocol for
4860 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4867 # Default IP address
4868 # This IP address is the default used by RedBoot if
4869 # a BOOTP/DHCP server does not respond. The numbers
4870 # should be separated by *commas*, and not dots. If
4871 # an IP address is configured into the Flash
4872 # configuration, that will be used in preference.
4874 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4876 # No user value, uncomment the following line to provide one.
4878 # value_source default
4879 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4880 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4885 # Do not try to use BOOTP
4886 # By default Redboot tries to use BOOTP to get an IP
4887 # address. If there's no BOOTP server on your network
4888 # use this option to avoid to wait until the
4889 # timeout. This option is overriden by the
4890 # configuration stored in flash.
4892 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4893 # This option is not active
4894 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4897 # No user value, uncomment the following line to provide one.
4899 # value_source default
4903 # Default bootp server
4904 # This IP address is the default server
4905 # address used by RedBoot if a BOOTP/DHCP
4906 # server does not respond. The numbers should
4907 # be separated by *commas*, and not dots. If
4908 # an IP address is configured into the Flash
4909 # configuration, that will be used in
4912 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4913 # This option is not active
4914 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4917 # No user value, uncomment the following line to provide one.
4919 # value_source default
4920 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4921 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4926 # Use DHCP to get IP information
4927 # Use DHCP protocol to obtain pertinent IP addresses, such
4928 # as the client, server, gateway, etc.
4930 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4932 # No user value, uncomment the following line to provide one.
4934 # value_source default
4937 # The following properties are affected by this value
4938 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4939 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4942 # Use a gateway for non-local IP traffic
4943 # Enabling this option will allow the RedBoot networking
4944 # stack to use a [single] gateway to reach a non-local
4945 # IP address. If disabled, RedBoot will only be able to
4946 # reach nodes on the same subnet.
4948 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4950 # No user value, uncomment the following line to provide one.
4952 # value_source default
4954 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4955 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4960 # Default gateway IP address
4961 # This IP address is the default used by RedBoot
4962 # if a BOOTP/DHCP server does not respond. The
4963 # numbers should be separated by *commas*, and
4964 # not dots. If an IP address is configured into
4965 # the Flash configuration, that will be used in
4968 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4970 # No user value, uncomment the following line to provide one.
4972 # value_source default
4973 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4974 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4978 # Default IP address mask
4979 # This IP address mask is the default used by
4980 # RedBoot if a BOOTP/DHCP server does not
4981 # respond. The numbers should be separated by
4982 # *commas*, and not dots. If an IP address is
4983 # configured into the Flash configuration, that
4984 # will be used in preference.
4986 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4988 # No user value, uncomment the following line to provide one.
4990 # value_source default
4991 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4992 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4997 # TCP port to listen for incoming connections
4998 # RedBoot will 'listen' on this port for incoming TCP
4999 # connections. This allows outside connections to be made
5000 # to the platform, either for GDB or RedBoot commands.
5002 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5004 # No user value, uncomment the following line to provide one.
5006 # value_source default
5007 # Default value: 9000
5010 # Number of [network] packet buffers
5011 # RedBoot may need to buffer network data to support
5012 # various connections. This option allows control
5013 # over the number of such buffered packets, and in
5014 # turn, controls the amount of memory used by RedBoot
5015 # (which is not available to user applications).
5016 # Each packet buffer takes up about 1514 bytes.
5017 # Note: there is little need to make this larger than
5020 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5022 # No user value, uncomment the following line to provide one.
5024 # value_source default
5026 # Legal values: 3 to 8
5030 # When this option is enabled, RedBoot will be built with
5031 # support for DNS, allowing use of hostnames on the command
5034 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5035 # This option is not active
5036 # ActiveIf constraint: CYGPKG_NS_DNS
5037 # CYGPKG_NS_DNS (unknown) == 0
5041 # No user value, uncomment the following line to provide one.
5043 # value_source default
5045 # Requires: !CYGPKG_NS_DNS_BUILD
5046 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5052 # This option sets the IP of the default DNS. The IP can be
5053 # changed at runtime as well.
5055 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5056 # This option is not active
5057 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5058 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5059 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5063 # No user value, uncomment the following line to provide one.
5064 # user_value 0.0.0.0
5065 # value_source default
5066 # Default value: 0.0.0.0
5069 # Timeout in DNS lookup
5070 # This option sets the timeout used when looking up an
5071 # address via the DNS. Default is 10 seconds.
5073 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5074 # This option is not active
5075 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5078 # No user value, uncomment the following line to provide one.
5080 # value_source default
5084 # Support the use of a domain name
5085 # This option controls if Redboot supports domain
5086 # names when performing DNS lookups
5088 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5089 # This option is not active
5090 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5093 # No user value, uncomment the following line to provide one.
5095 # value_source default
5100 # Default DNS domain
5101 # This option sets the default DNS domain name.
5102 # This value will be overwritten by the value in
5103 # flash or a domain returned by DHCP
5105 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5106 # This option is not active
5107 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5108 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5111 # No user value, uncomment the following line to provide one.
5113 # value_source default
5114 # Default value: 0 0
5117 # Get DNS domain from Flash
5118 # This option enables getting the domain name
5119 # from the flash configuration. This can later be
5120 # overwritten by a value learnt from DHCP
5122 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5123 # This option is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5125 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5126 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5127 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5131 # No user value, uncomment the following line to provide one.
5133 # value_source default
5137 # Use DNS domain from DHCP
5138 # This option enables the use of the domain name
5141 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5142 # This option is not active
5143 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5144 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5147 # No user value, uncomment the following line to provide one.
5149 # value_source default
5153 # BOOTP/DHCP DNS domain buffer size
5154 # This options sets the size of the static
5155 # buffer used by BOOTP/DHCP to store the DNS
5156 # domain name. The domain name will not be
5157 # set if the buffer is too small to hold it.
5159 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5160 # This option is not active
5161 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5162 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5165 # No user value, uncomment the following line to provide one.
5167 # value_source default
5173 # Default network device driver
5174 # This is the name of the default network device to use.
5176 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5177 # This option is not active
5178 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5179 # CYGHWR_NET_DRIVERS == 1
5183 # No user value, uncomment the following line to provide one.
5185 # value_source default
5186 # Default value: "\"\""
5189 # Initialize only one net device
5190 # This option tells RedBoot to stop initializing network
5191 # devices when it finds the first device which is
5192 # successfully initialized. The default behavior causes
5193 # all network devices to be initialized.
5195 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5196 # This option is not active
5197 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5198 # CYGHWR_NET_DRIVERS == 1
5202 # No user value, uncomment the following line to provide one.
5204 # value_source default
5209 # Let RedBoot use any I/O channel for its console.
5210 # If this option is enabled then RedBoot will attempt to use all
5211 # defined serial I/O channels for its console device. Once input
5212 # arrives at one of these channels then the console will use only
5215 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5217 # No user value, uncomment the following line to provide one.
5219 # The inferred value should not be edited directly.
5221 # value_source inferred
5225 # Let RedBoot adjust the baud rate of the serial console.
5226 # If this option is enabled then RedBoot will support commands
5227 # to set and query the baud rate on the selected console.
5229 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5230 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5231 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5235 # No user value, uncomment the following line to provide one.
5237 # value_source default
5241 # Run a platform specific startup function.
5242 # If this option is enabled then RedBoot will execute a platform
5243 # specific startup function before entering into its command line
5244 # processing. This allows the platform to perform any special
5245 # setups before RedBoot actually starts running. Note: the entire
5246 # RedBoot environment will already be initialized at this point.
5248 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5250 # No user value, uncomment the following line to provide one.
5252 # value_source default
5256 # Run a platform specific ESA validation function.
5257 # If this option is enabled then RedBoot will execute a platform
5258 # specific function to validate an ethernet ESA. This would be
5259 # useful if the address must conform to standards set by the
5260 # hardware manufacturer, etc.
5262 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5264 # No user value, uncomment the following line to provide one.
5266 # The inferred value should not be edited directly.
5268 # value_source inferred
5271 # The following properties are affected by this value
5272 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5273 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5274 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5275 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5278 # Maximum command line length
5279 # This option allows control over how long the CLI command line
5280 # should be. This space will be allocated statically
5281 # rather than from RedBoot's stack.
5283 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5285 # No user value, uncomment the following line to provide one.
5287 # The inferred value should not be edited directly.
5289 # value_source inferred
5290 # Default value: 256
5293 # Command processing idle timeout (ms)
5294 # This option controls the timeout period before the
5295 # command processing is considered 'idle'. Making this
5296 # number smaller will cause idle processing to take place
5297 # more often, etc. The default value of 10ms is a reasonable
5298 # tradeoff between responsiveness and overhead.
5300 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5302 # No user value, uncomment the following line to provide one.
5304 # value_source default
5308 # Validate RAM addresses during load
5309 # This option controls whether or not RedBoot will make
5310 # sure that memory being used by the "load" command is
5311 # in fact in user RAM. Leaving the option enabled makes
5312 # for a safer environment, but this check may not be valid
5313 # on all platforms, thus the ability to disable it.
5314 # ** Disable this only with great care **
5316 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5318 # No user value, uncomment the following line to provide one.
5320 # value_source default
5323 # The following properties are affected by this value
5324 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5325 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5328 # Allow RedBoot to support FLASH programming
5329 # If this option is enabled then RedBoot will provide commands
5330 # to manage images in FLASH memory. These images can be loaded
5331 # into memory for execution or executed in place.
5333 cdl_component CYGPKG_REDBOOT_FLASH {
5334 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5335 # CYGHWR_IO_FLASH_DEVICE == 1
5339 # No user value, uncomment the following line to provide one.
5341 # value_source default
5344 # The following properties are affected by this value
5345 # option CYGPRI_REDBOOT_ZLIB_FLASH
5346 # ActiveIf: CYGPKG_REDBOOT_FLASH
5347 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5348 # ActiveIf: CYGPKG_REDBOOT_FLASH
5352 # Byte order used to store info in flash.
5353 # This option controls the byte ordering used to store
5354 # the FIS directory info and flash config info.
5356 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5358 # No user value, uncomment the following line to provide one.
5359 # user_value NATURAL
5360 # value_source default
5361 # Default value: NATURAL
5362 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5365 # RedBoot Flash Image System support
5366 # doc: ref/flash-image-system.html
5367 # This option enables the Flash Image System commands
5368 # and support within RedBoot. If disabled, simple Flash
5369 # access commands such as "fis write" will still exist.
5370 # This option would be disabled for targets that need simple
5371 # FLASH manipulation, but do not have the need or space for
5372 # complete image management.
5374 cdl_option CYGOPT_REDBOOT_FIS {
5376 # No user value, uncomment the following line to provide one.
5378 # value_source default
5381 # The following properties are affected by this value
5382 # component CYGPKG_REDBOOT_FIS_CONTENTS
5383 # ActiveIf: CYGOPT_REDBOOT_FIS
5384 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5385 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5386 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5387 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5390 # Max number of chunks of free space to manage
5391 # If this option is defined then "fis free" will
5392 # rely on the FIS directory to determine what space is
5393 # free within the FLASH. This option controls the
5394 # maximum number of free segment which can be handled
5395 # (typically this number is small). If this option is
5396 # not enabled, the the archaic behaviour of actually
5397 # scanning the FLASH for erased sectors (unreliable)
5398 # will be used to determine what's free and what's
5401 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5403 # No user value, uncomment the following line to provide one.
5405 # value_source default
5406 # Default value: 1 32
5409 # Flash Image System default directory contents
5411 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5412 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5413 # CYGOPT_REDBOOT_FIS == 1
5416 # Calculated value: 1
5422 # Flash block containing the Directory
5423 # Which block of flash should hold the directory
5424 # information. Positive numbers are absolute block
5425 # numbers. Negative block numbers count backwards
5426 # from the last block. eg 2 means block 2, -2
5427 # means the last but one block.
5429 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5431 # No user value, uncomment the following line to provide one.
5433 # value_source default
5436 # The following properties are affected by this value
5437 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5438 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5439 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5442 # Redundant Flash Image System Directory Support
5443 # This option enables the use of a redundant FIS
5444 # directory within RedBoot. If enabled a flash block
5445 # will be reserved for a second copy of the fis
5446 # directory. Doing this allow for power failure safe
5447 # updates of the directory by the application.
5449 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5451 # No user value, uncomment the following line to provide one.
5453 # value_source default
5455 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5456 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5461 # Flash block containing the backup Directory
5462 # Which block of flash should hold the redundant
5463 # directory information. Positive numbers are
5464 # absolute block numbers. Negative block numbers
5465 # count backwards from the last block. eg 2 means
5466 # block 2, -2 means the last but one block.
5468 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5469 # This option is not active
5470 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5473 # No user value, uncomment the following line to provide one.
5475 # value_source default
5477 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5478 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5479 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5480 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5483 # The following properties are affected by this value
5484 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5485 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5486 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5490 # Pseudo-file to describe reserved area
5491 # If an area of FLASH is reserved, it is informative to
5492 # have a fis entry describing it. This option controls
5493 # creation of such an entry by default in the fis init
5496 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5497 # This option is not active
5498 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5499 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5503 # No user value, uncomment the following line to provide one.
5505 # value_source default
5509 # File to describe RedBoot boot image
5510 # Normally a ROM-startup RedBoot image is first in the
5511 # FLASH, and the system boots using that image. This
5512 # option controls creation of an entry describing it in
5513 # the fis init command. It might be disabled if a
5514 # platform has an immutable boot image of its own, where
5515 # we use a POST-startup RedBoot instead, which performs
5516 # less board initialization.
5518 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5520 # No user value, uncomment the following line to provide one.
5522 # value_source default
5525 # The following properties are affected by this value
5526 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5527 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5528 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5529 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5532 # File to describe RedBoot POST-compatible image
5533 # This option controls creation of an entry describing a
5534 # POST-startup RedBoot image in the fis init command.
5535 # Not all platforms support POST-startup. A platform
5536 # might have both for testing purposes, where the
5537 # eventual user would substitute their own POST code for
5538 # the initial ROM-startup RedBoot, and then jump to the
5539 # POST-compatible RedBoot immediately following.
5541 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5543 # No user value, uncomment the following line to provide one.
5545 # value_source default
5546 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5547 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5552 # Offset of POST image from FLASH start
5553 # This option specifies the offset for a POST image from
5554 # the start of FLASH. If unset, then the fis entry
5555 # describing the POST image will be placed where
5558 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5559 # This option is not active
5560 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5563 # No user value, uncomment the following line to provide one.
5565 # value_source default
5566 # Default value: 0 0
5567 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5568 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5569 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5572 # The following properties are affected by this value
5573 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5574 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5578 # File to describe RedBoot backup image
5579 # This option controls creation of an entry describing a
5580 # backup RedBoot image in the fis init command.
5581 # Conventionally a RAM-startup RedBoot image is kept
5582 # under this name for use in updating the ROM-based
5583 # RedBoot that boots the board.
5585 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5587 # No user value, uncomment the following line to provide one.
5589 # value_source default
5593 # Include ARM SIB ID in FIS
5594 # If set, this option will cause the last 5 words of
5595 # the FIS to include the special ID needed for the
5596 # flash to be recognized as a reserved area for RedBoot
5597 # by an ARM BootRom monitor.
5599 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5601 # No user value, uncomment the following line to provide one.
5603 # value_source default
5607 # Size of FIS directory entry
5608 # The FIS directory is limited to one single flash
5609 # sector. If your flash has tiny sectors, you may wish
5610 # to reduce this value in order to get more slots in
5611 # the FIS directory.
5613 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5615 # No user value, uncomment the following line to provide one.
5617 # value_source default
5618 # Default value: 256
5621 # Number of FIS directory entries
5622 # The FIS directory normally occupies a single flash
5623 # sector. Adjusting this value can allow for more than
5624 # one flash sector to be used, which is useful if your
5625 # sectors are very small.
5627 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5629 # No user value, uncomment the following line to provide one.
5631 # value_source default
5635 # Maximum RedBoot image size
5636 # This option controls the maximum length reserved
5637 # for the RedBoot boot image in the FIS table.
5638 # This should be a multiple of the flash's erase
5641 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5643 # No user value, uncomment the following line to provide one.
5644 # user_value 0x00020000
5645 # The inferred value should not be edited directly.
5646 inferred_value 0x00040000
5647 # value_source inferred
5648 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5649 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5653 # Offset from start of FLASH to RedBoot boot image
5654 # This option controls where the RedBoot boot image is
5655 # located relative to the start of FLASH.
5657 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5659 # No user value, uncomment the following line to provide one.
5661 # value_source default
5662 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5663 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5665 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5666 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5667 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5670 # The following properties are affected by this value
5671 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5672 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5673 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5674 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5675 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5676 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5679 # Size of reserved area at start of FLASH
5680 # This option reserves an area at the start of
5681 # FLASH where RedBoot will never interfere; it is
5682 # expected that this area contains
5683 # (non-RedBoot-based) POST code or some other boot
5684 # monitor that executes before RedBoot.
5686 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5688 # No user value, uncomment the following line to provide one.
5690 # value_source default
5693 # The following properties are affected by this value
5694 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5695 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5696 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5697 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5698 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5699 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5703 # Keep all RedBoot FLASH data blocks locked.
5704 # When this option is enabled, RedBoot will keep configuration
5705 # data and the FIS directory blocks implicitly locked. While
5706 # this is somewhat safer, it does add overhead during updates.
5708 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5709 # This option is not active
5710 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5711 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5715 # No user value, uncomment the following line to provide one.
5717 # value_source default
5721 # Use CRC checksums on FIS images.
5722 # When this option is enabled, RedBoot will use CRC checksums
5723 # when reading and writing flash images.
5725 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5727 # No user value, uncomment the following line to provide one.
5729 # value_source default
5733 # ARM FLASH drivers support SIB flash block structure
5734 # This interface is implemented by a flash driver
5735 # to indicate that it supports the ARM SIB flash
5738 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5739 # No options implement this inferface
5740 # ActiveIf constraint: CYGPKG_HAL_ARM
5741 # CYGPKG_HAL_ARM == current
5744 # This value cannot be modified here.
5748 # The following properties are affected by this value
5749 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5750 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5753 # Use ARM SIB flash block structure
5754 # This option is used to interpret ARM Flash System
5755 # information blocks.
5757 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5758 # This option is not active
5759 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5760 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5764 # No user value, uncomment the following line to provide one.
5766 # value_source default
5771 # Keep RedBoot configuration data in FLASH
5772 # When this option is enabled, RedBoot will keep configuration
5773 # data in a separate block of FLASH memory. This data will
5774 # include such items as the node IP address or startup scripts.
5776 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5778 # No user value, uncomment the following line to provide one.
5780 # value_source default
5781 # Default value: CYGPKG_IO_FLASH != 0
5782 # CYGPKG_IO_FLASH == current
5785 # The following properties are affected by this value
5786 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5787 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5788 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5789 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5790 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5791 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5792 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5793 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5794 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5795 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5796 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5797 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5798 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5799 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5803 # Length of configuration data in FLASH
5804 # This option is used to control the amount of memory and FLASH
5805 # to be used for configuration options (persistent storage).
5807 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5809 # No user value, uncomment the following line to provide one.
5811 # value_source default
5812 # Default value: 4096
5815 # Style of media used for persistent data storage
5816 # Persistent data storage can either be held in 'norma' FLASH
5817 # or some other device (represented by the 'EEPROM' choice).
5818 # The different styles utilize different access methods.
5820 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5822 # No user value, uncomment the following line to provide one.
5824 # value_source default
5825 # Default value: FLASH
5826 # Legal values: "FLASH" "EEPROM"
5828 # The following properties are affected by this value
5829 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5830 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5831 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5832 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5835 # Merged config data and FIS directory
5836 # If this option is set, then the FIS directory and FLASH
5837 # configuration database will be stored in the same physical
5840 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5841 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5842 # CYGOPT_REDBOOT_FIS == 1
5843 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5847 # No user value, uncomment the following line to provide one.
5849 # value_source default
5852 # The following properties are affected by this value
5853 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5854 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5857 # Which block of flash to use
5858 # Which block of flash should hold the configuration
5859 # information. Positive numbers are absolute block numbers.
5860 # Negative block numbers count backwards from the last block.
5861 # eg 2 means block 2, -2 means the last but one block.
5863 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5865 # No user value, uncomment the following line to provide one.
5867 # value_source default
5871 # Support simple macros/aliases in FLASH
5872 # This option is used to allow support for simple text-based
5873 # macros (aliases). These aliases are kept in the FLASH
5874 # configuration data (persistent storage).
5876 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5878 # No user value, uncomment the following line to provide one.
5880 # value_source default
5884 # Length of strings in FLASH configuration data
5885 # This option is used to control the amount of memory
5886 # and FLASH to be used for string configuration
5887 # options (persistent storage).
5889 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5891 # No user value, uncomment the following line to provide one.
5893 # value_source default
5894 # Default value: 128
5897 # Length of configuration script(s) in FLASH
5898 # This option is used to control the amount of memory and
5899 # FLASH to be used for configuration options (persistent
5902 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5904 # No user value, uncomment the following line to provide one.
5906 # The inferred value should not be edited directly.
5908 # value_source inferred
5909 # Default value: 512
5912 # Fallback to read-only FLASH configuration
5913 # This option will cause the configuration information to
5914 # revert to the readonly information stored in the FLASH.
5915 # The option only takes effect after
5916 # 1) the config_ok flag has been set to be true,
5917 # indicating that at one time the copy in RAM was valid;
5919 # 2) the information in RAM has been verified to be invalid
5921 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5923 # No user value, uncomment the following line to provide one.
5925 # value_source default
5926 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5927 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5932 # Allow RedBoot to support fileio
5933 # If this option is enabled then RedBoot will provide commands
5934 # to load files from fileio file systems such as JFFS2.
5936 cdl_component CYGPKG_REDBOOT_FILEIO {
5937 # This option is not active
5938 # ActiveIf constraint: CYGPKG_IO_FILEIO
5939 # CYGPKG_IO_FILEIO (unknown) == 0
5943 # No user value, uncomment the following line to provide one.
5945 # value_source default
5948 # The following properties are affected by this value
5949 # option CYGNUM_REDBOOT_GETC_BUFFER
5950 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5954 # Include an ls command
5955 # If this option is enabled a simple ls command will be
5956 # included in redboot so the contents of a directory
5959 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5960 # This option is not active
5961 # The parent CYGPKG_REDBOOT_FILEIO is not active
5964 # No user value, uncomment the following line to provide one.
5966 # value_source default
5971 # Allow RedBoot to support disks
5972 # If this option is enabled then RedBoot will provide commands
5973 # to load disk files.
5975 cdl_component CYGPKG_REDBOOT_DISK {
5983 # Include Redboot commands for disk access
5985 cdl_option CYGSEM_REDBOOT_DISK {
5986 # This option is not active
5987 # The parent CYGPKG_REDBOOT_DISK is disabled
5990 # No user value, uncomment the following line to provide one.
5992 # value_source default
5993 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5994 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5998 # Hardware drivers for disk-type devices
6000 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6001 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6002 # This option is not active
6003 # The parent CYGPKG_REDBOOT_DISK is disabled
6005 # This value cannot be modified here.
6009 # The following properties are affected by this value
6010 # option CYGSEM_REDBOOT_DISK
6011 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6014 # Maximum number of supported disks
6015 # This option controls the number of disks supported by
6018 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6019 # This option is not active
6020 # The parent CYGPKG_REDBOOT_DISK is disabled
6023 # No user value, uncomment the following line to provide one.
6025 # value_source default
6029 # Maximum number of partitions per disk
6030 # This option controls the maximum number of supported
6031 # partitions per disk.
6033 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6034 # This option is not active
6035 # The parent CYGPKG_REDBOOT_DISK is disabled
6038 # No user value, uncomment the following line to provide one.
6040 # value_source default
6044 # Support IDE disks.
6045 # When this option is enabled, RedBoot will support IDE disks.
6047 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6048 # This option is not active
6049 # The parent CYGPKG_REDBOOT_DISK is disabled
6050 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6051 # CYGINT_HAL_PLF_IF_IDE == 0
6055 # No user value, uncomment the following line to provide one.
6057 # value_source default
6062 # Work with VMware virtual disks
6063 # This option controls the disk driver behavior at
6066 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6067 # This option is not active
6068 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6071 # No user value, uncomment the following line to provide one.
6073 # value_source default
6078 # Support Linux second extended filesystems.
6079 # When this option is enabled, RedBoot will support EXT2
6082 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6083 # This option is not active
6084 # The parent CYGPKG_REDBOOT_DISK is disabled
6087 # No user value, uncomment the following line to provide one.
6089 # value_source default
6093 # Support ISO9660 filesystems.
6094 # When this option is enabled, RedBoot will support ISO9660
6097 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6098 # This option is not active
6099 # The parent CYGPKG_REDBOOT_DISK is disabled
6101 # Calculated value: 0
6108 # doc: ref/persistent-state-flash.html
6109 # This contains options related to RedBoot's boot script
6112 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6113 # There is no associated value.
6117 # Boot scripting enabled
6118 # This option controls whether RedBoot boot script
6119 # functionality is enabled.
6121 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6122 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6123 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6124 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6127 # Calculated value: 1
6132 # Use default RedBoot boot script
6133 # If enabled, this option will tell RedBoot to use the
6134 # value of this option as a default boot script.
6136 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6138 # No user value, uncomment the following line to provide one.
6140 # The inferred value should not be edited directly.
6142 # value_source inferred
6143 # Default value: 0 0
6145 # The following properties are affected by this value
6146 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6147 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6150 # Resolution (in ms) for script timeout value.
6151 # This option controls the resolution of the script
6152 # timeout. The value is specified in milliseconds
6153 # (ms), thus to have the script timeout be defined in
6154 # terms of tenths of seconds, use 100.
6156 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6158 # No user value, uncomment the following line to provide one.
6160 # The inferred value should not be edited directly.
6162 # value_source inferred
6163 # Default value: 1000
6166 # Script default timeout value
6167 # This option is used to set the default timeout for startup
6168 # scripts, when they are enabled.
6170 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6172 # No user value, uncomment the following line to provide one.
6174 # The inferred value should not be edited directly.
6176 # value_source inferred
6181 # Support RTC for time & date functions
6182 # When this option is enabled, RedBoot will support commands to
6183 # query and set the real time clock (time and date)
6185 cdl_option CYGSEM_REDBOOT_RTC {
6186 # This option is not active
6187 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6188 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6192 # No user value, uncomment the following line to provide one.
6194 # value_source default
6198 # Behave like a ROM monitor
6199 # Enabling this option will allow RedBoot to provide ROM
6200 # monitor-style services to programs which it executes.
6202 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6203 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6204 # CYG_HAL_STARTUP == ROMRAM
6205 # CYG_HAL_STARTUP == ROMRAM
6208 # Calculated value: 1
6211 # Requires: CYGSEM_HAL_ROM_MONITOR
6212 # CYGSEM_HAL_ROM_MONITOR == 1
6216 # Allow RedBoot to handle GNUPro application 'syscalls'.
6217 # If this option is enabled then RedBoot will install a
6218 # syscall handler to support debugging of applications
6219 # based on GNUPro newlib/bsp.
6221 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6223 # No user value, uncomment the following line to provide one.
6225 # value_source default
6228 # The following properties are affected by this value
6229 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6230 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6231 # option CYGPKG_HAL_GDB_FILEIO
6232 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6236 # Support additional syscalls for 'gprof' profiling
6237 # Support additional syscalls to support a periodic callback
6238 # function for histogram-style profiling, and an enquire/set
6240 # The application must use the GNUPro newlib facilities
6243 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6244 # This option is not active
6245 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6246 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6247 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6251 # No user value, uncomment the following line to provide one.
6253 # value_source default
6257 # Does the HAL support 'gprof' profiling?
6259 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6260 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6261 # This option is not active
6262 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6264 # This value cannot be modified here.
6268 # The following properties are affected by this value
6269 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6270 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6273 # Do not raise SIGTRAP when program exits
6274 # For some (single shot) newlib based programs,
6275 # exiting and returning a termination status may be
6276 # the normal expected behavior.
6278 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6279 # This option is not active
6280 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6283 # No user value, uncomment the following line to provide one.
6285 # value_source default
6290 # Use a common buffer for Zlib and FIS
6291 # Use a common memory buffer for both the zlib workspace
6292 # and FIS directory operations. This can save a substantial
6293 # amount of RAM, especially when flash sectors are large.
6295 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6296 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6297 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6298 # CYGOPT_REDBOOT_FIS == 1
6302 # No user value, uncomment the following line to provide one.
6304 # value_source default
6309 # Size of Zlib/FIS common buffer
6310 # Size of common buffer to allocate. Must be at least the
6311 # size of one flash sector.
6313 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6314 # This option is not active
6315 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6318 # No user value, uncomment the following line to provide one.
6319 # user_value 0x0000C000
6320 # value_source default
6321 # Default value: 0x0000C000
6322 # Legal values: 0x4000 to 0x80000000
6326 # Buffer size in getc when loading images
6327 # When loading images a buffer is used between redboot and the
6328 # underlying storage medium, eg a filesystem, or a socket etc.
6329 # The size of this buffer can have a big impart on load speed.
6331 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6333 # No user value, uncomment the following line to provide one.
6335 # value_source default
6336 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6337 # CYGPKG_REDBOOT_FILEIO == 0
6342 # Redboot for ARM options
6343 # This option lists the target's requirements for a valid Redboot
6346 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6347 # ActiveIf constraint: CYGPKG_REDBOOT
6348 # CYGPKG_REDBOOT == current
6351 # There is no associated value.
6353 # The following properties are affected by this value
6357 # Provide the exec command in RedBoot
6358 # This option contains requirements for booting linux
6359 # from RedBoot. The component is enabled/disabled from
6362 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6363 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6364 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6367 # There is no associated value.
6371 # Enable -x switch for exec command.
6372 # This option allows bi-endian platforms to launch kernels
6373 # built for an endianess different than the RedBoot endianess
6375 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6377 # No user value, uncomment the following line to provide one.
6379 # value_source default
6383 # Physical base address of linux kernel
6384 # This is the physical address of the base of the
6385 # Linux kernel image.
6387 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6389 # No user value, uncomment the following line to provide one.
6390 # user_value 0xA0108000
6391 # value_source default
6392 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6393 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6397 # Default physical base address of linux kernel
6398 # This is the physical address of the base of the
6399 # Linux kernel image. This option gets set by the
6402 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6404 # No user value, uncomment the following line to provide one.
6405 # user_value 0x00008000
6406 # The inferred value should not be edited directly.
6407 inferred_value 0xA0108000
6408 # value_source inferred
6409 # Default value: 0x00008000
6411 # The following properties are affected by this value
6412 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6413 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6414 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6415 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6418 # Base address of linux kernel parameter tags
6419 # This is the base address of the area of memory used to
6420 # pass parameters to the Linux kernel. This should be chosen
6421 # to avoid overlap with the kernel and any ramdisk image.
6423 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6425 # No user value, uncomment the following line to provide one.
6426 # user_value 0x00000100
6427 # value_source default
6428 # Default value: 0x00000100
6433 # Redboot HAL options
6434 # This option lists the target's requirements for a valid Redboot
6437 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6438 # ActiveIf constraint: CYGPKG_REDBOOT
6439 # CYGPKG_REDBOOT == current
6442 # There is no associated value.
6446 # Build Redboot ROM binary image
6447 # This option enables the conversion of the Redboot ELF
6448 # image to a binary image suitable for ROM programming.
6450 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6451 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6452 # CYGBLD_BUILD_REDBOOT == 1
6456 # No user value, uncomment the following line to provide one.
6458 # value_source default
6463 # Redboot HAL variant options
6465 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6466 # ActiveIf constraint: CYGPKG_REDBOOT
6467 # CYGPKG_REDBOOT == current
6470 # There is no associated value.
6471 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6472 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6477 # ISO C and POSIX infrastructure
6478 # eCos supports implementations of ISO C libraries and POSIX
6479 # implementations. This package provides infrastructure used by
6480 # all such implementations.
6482 cdl_package CYGPKG_ISOINFRA {
6483 # Packages cannot be added or removed, nor can their version be changed,
6484 # simply by editing their value. Instead the appropriate configuration
6485 # should be used to perform these actions.
6487 # This value cannot be modified here.
6489 # Current value: 1 current
6491 # The following properties are affected by this value
6492 # component CYGBLD_BUILD_REDBOOT
6493 # Requires: CYGPKG_ISOINFRA
6494 # package CYGPKG_LIBC_STRING
6495 # Requires: CYGPKG_ISOINFRA
6496 # package CYGPKG_COMPRESS_ZLIB
6497 # Requires: CYGPKG_ISOINFRA
6498 # package CYGPKG_IO_FLASH
6499 # Requires: CYGPKG_ISOINFRA
6500 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6501 # Requires: CYGPKG_ISOINFRA
6502 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6503 # DefaultValue: 0 != CYGPKG_ISOINFRA
6504 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6505 # ActiveIf: CYGPKG_ISOINFRA
6506 # package CYGPKG_LIBC_I18N
6507 # Requires: CYGPKG_ISOINFRA
6508 # package CYGPKG_LIBC_STDLIB
6509 # Requires: CYGPKG_ISOINFRA
6513 # Startup and termination
6515 cdl_component CYGPKG_ISO_STARTUP {
6516 # There is no associated value.
6520 # main() startup implementations
6521 # Implementations of this interface arrange for a user-supplied
6522 # main() to be called in an ISO compatible environment.
6524 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6525 # No options implement this inferface
6526 # This value cannot be modified here.
6529 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6530 # CYGINT_ISO_MAIN_STARTUP == 0
6533 # The following properties are affected by this value
6534 # interface CYGINT_ISO_MAIN_STARTUP
6535 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6538 # environ implementations
6539 # Implementations of this interface provide the environ
6540 # variable required by POSIX.
6542 cdl_interface CYGINT_ISO_ENVIRON {
6543 # No options implement this inferface
6544 # This value cannot be modified here.
6547 # Requires: 1 >= CYGINT_ISO_ENVIRON
6548 # CYGINT_ISO_ENVIRON == 0
6551 # The following properties are affected by this value
6552 # interface CYGINT_ISO_ENVIRON
6553 # Requires: 1 >= CYGINT_ISO_ENVIRON
6559 cdl_component CYGPKG_ISO_CTYPE_H {
6560 # There is no associated value.
6564 # Number of implementations of ctype functions
6566 cdl_interface CYGINT_ISO_CTYPE {
6567 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6568 # This value cannot be modified here.
6571 # Requires: 1 >= CYGINT_ISO_CTYPE
6572 # CYGINT_ISO_CTYPE == 1
6575 # The following properties are affected by this value
6576 # interface CYGINT_ISO_CTYPE
6577 # Requires: 1 >= CYGINT_ISO_CTYPE
6578 # package CYGPKG_HAL_ARM_TX27KARO
6579 # Requires: CYGINT_ISO_CTYPE
6580 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6581 # Requires: CYGINT_ISO_CTYPE
6582 # package CYGPKG_LIBC_STDLIB
6583 # Requires: CYGINT_ISO_CTYPE
6586 # Ctype implementation header
6588 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6590 # No user value, uncomment the following line to provide one.
6592 # The inferred value should not be edited directly.
6593 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6594 # value_source inferred
6595 # Default value: 0 0
6597 # The following properties are affected by this value
6598 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6599 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6600 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6601 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6607 cdl_component CYGPKG_ISO_ERRNO {
6608 # There is no associated value.
6612 # Number of implementations of error codes
6614 cdl_interface CYGINT_ISO_ERRNO_CODES {
6615 # Implemented by CYGPKG_ERROR, active, enabled
6616 # This value cannot be modified here.
6619 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6620 # CYGINT_ISO_ERRNO_CODES == 1
6623 # The following properties are affected by this value
6624 # interface CYGINT_ISO_ERRNO_CODES
6625 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6628 # Error codes implementation header
6630 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6632 # No user value, uncomment the following line to provide one.
6634 # The inferred value should not be edited directly.
6635 inferred_value 1 <cyg/error/codes.h>
6636 # value_source inferred
6637 # Default value: 0 0
6639 # The following properties are affected by this value
6640 # package CYGPKG_ERROR
6641 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6644 # Number of implementations of errno variable
6646 cdl_interface CYGINT_ISO_ERRNO {
6647 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6648 # This value cannot be modified here.
6651 # Requires: 1 >= CYGINT_ISO_ERRNO
6652 # CYGINT_ISO_ERRNO == 1
6655 # The following properties are affected by this value
6656 # interface CYGINT_ISO_ERRNO
6657 # Requires: 1 >= CYGINT_ISO_ERRNO
6660 # errno variable implementation header
6662 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6664 # No user value, uncomment the following line to provide one.
6666 # The inferred value should not be edited directly.
6667 inferred_value 1 <cyg/error/errno.h>
6668 # value_source inferred
6669 # Default value: 0 0
6671 # The following properties are affected by this value
6672 # component CYGPKG_ERROR_ERRNO
6673 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6677 # Locale-related functions
6679 cdl_component CYGPKG_ISO_LOCALE {
6680 # There is no associated value.
6684 # Number of implementations of locale functions
6686 cdl_interface CYGINT_ISO_LOCALE {
6687 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6688 # This value cannot be modified here.
6691 # Requires: 1 >= CYGINT_ISO_LOCALE
6692 # CYGINT_ISO_LOCALE == 1
6695 # The following properties are affected by this value
6696 # interface CYGINT_ISO_LOCALE
6697 # Requires: 1 >= CYGINT_ISO_LOCALE
6700 # Locale implementation header
6702 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6704 # No user value, uncomment the following line to provide one.
6706 # value_source default
6707 # Default value: 0 0
6711 # Standard I/O-related functionality
6713 cdl_component CYGPKG_ISO_STDIO {
6714 # There is no associated value.
6718 # Number of implementations of stdio file types
6720 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6721 # No options implement this inferface
6722 # This value cannot be modified here.
6724 # Current value: 0 0
6725 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6726 # CYGINT_ISO_STDIO_FILETYPES == 0
6729 # The following properties are affected by this value
6730 # interface CYGINT_ISO_STDIO_FILETYPES
6731 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6734 # Stdio file types implementation header
6736 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6738 # No user value, uncomment the following line to provide one.
6740 # value_source default
6741 # Default value: 0 0
6744 # Stdio standard streams implementations
6746 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6747 # No options implement this inferface
6748 # This value cannot be modified here.
6750 # Current value: 0 0
6751 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6752 # CYGINT_ISO_STDIO_STREAMS == 0
6755 # The following properties are affected by this value
6756 # interface CYGINT_ISO_STDIO_STREAMS
6757 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6760 # Stdio standard streams implementation header
6761 # This header file must define stdin, stdout
6764 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6766 # No user value, uncomment the following line to provide one.
6768 # value_source default
6769 # Default value: 0 0
6772 # Number of implementations of stdio file operations
6774 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6775 # No options implement this inferface
6776 # This value cannot be modified here.
6778 # Current value: 0 0
6779 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6780 # CYGINT_ISO_STDIO_FILEOPS == 0
6783 # The following properties are affected by this value
6784 # interface CYGINT_ISO_STDIO_FILEOPS
6785 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6788 # Stdio file operations implementation header
6789 # This header controls the file system operations on a file
6790 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6793 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6795 # No user value, uncomment the following line to provide one.
6797 # value_source default
6798 # Default value: 0 0
6801 # Number of implementations of stdio file access functionals
6803 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6804 # No options implement this inferface
6805 # This value cannot be modified here.
6807 # Current value: 0 0
6808 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6809 # CYGINT_ISO_STDIO_FILEACCESS == 0
6812 # The following properties are affected by this value
6813 # interface CYGINT_ISO_STDIO_FILEACCESS
6814 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6815 # option CYGFUN_COMPRESS_ZLIB_GZIO
6816 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6819 # Stdio file access implementation header
6820 # This header controls the file access operations
6821 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6822 # setvbuf(), and associated constants.
6824 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6826 # No user value, uncomment the following line to provide one.
6828 # value_source default
6829 # Default value: 0 0
6832 # Number of implementations of stdio formatted I/O
6834 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6835 # No options implement this inferface
6836 # This value cannot be modified here.
6838 # Current value: 0 0
6839 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6840 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6843 # The following properties are affected by this value
6844 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6845 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6846 # option CYGFUN_COMPRESS_ZLIB_GZIO
6847 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6850 # Stdio formatted I/O implementation header
6852 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6854 # No user value, uncomment the following line to provide one.
6856 # value_source default
6857 # Default value: 0 0
6860 # Number of implementations of stdio character I/O
6862 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6863 # No options implement this inferface
6864 # This value cannot be modified here.
6866 # Current value: 0 0
6867 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6868 # CYGINT_ISO_STDIO_CHAR_IO == 0
6871 # The following properties are affected by this value
6872 # interface CYGINT_ISO_STDIO_CHAR_IO
6873 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6876 # Stdio character I/O implementation header
6878 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6880 # No user value, uncomment the following line to provide one.
6882 # value_source default
6883 # Default value: 0 0
6886 # Number of implementations of stdio direct I/O
6888 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6889 # No options implement this inferface
6890 # This value cannot be modified here.
6892 # Current value: 0 0
6893 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6894 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6897 # The following properties are affected by this value
6898 # interface CYGINT_ISO_STDIO_DIRECT_IO
6899 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6902 # Stdio direct I/O implementation header
6904 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6906 # No user value, uncomment the following line to provide one.
6908 # value_source default
6909 # Default value: 0 0
6912 # Number of implementations of stdio file positioning
6914 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6915 # No options implement this inferface
6916 # This value cannot be modified here.
6918 # Current value: 0 0
6919 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6920 # CYGINT_ISO_STDIO_FILEPOS == 0
6923 # The following properties are affected by this value
6924 # interface CYGINT_ISO_STDIO_FILEPOS
6925 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6926 # option CYGFUN_COMPRESS_ZLIB_GZIO
6927 # Requires: CYGINT_ISO_STDIO_FILEPOS
6930 # Stdio file positioning implementation header
6932 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6934 # No user value, uncomment the following line to provide one.
6936 # value_source default
6937 # Default value: 0 0
6940 # Number of implementations of stdio error handling
6942 cdl_interface CYGINT_ISO_STDIO_ERROR {
6943 # No options implement this inferface
6944 # This value cannot be modified here.
6946 # Current value: 0 0
6947 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6948 # CYGINT_ISO_STDIO_ERROR == 0
6951 # The following properties are affected by this value
6952 # interface CYGINT_ISO_STDIO_ERROR
6953 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6956 # Stdio error handling implementation header
6958 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6960 # No user value, uncomment the following line to provide one.
6962 # value_source default
6963 # Default value: 0 0
6966 # POSIX fd-related function implementations
6968 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6969 # No options implement this inferface
6970 # This value cannot be modified here.
6972 # Current value: 0 0
6973 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6974 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6977 # The following properties are affected by this value
6978 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6979 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6982 # POSIX fd-related function implementation header
6984 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6986 # No user value, uncomment the following line to provide one.
6988 # value_source default
6989 # Default value: 0 0
6993 # Standard general utility functions
6995 cdl_component CYGPKG_ISO_STDLIB {
6996 # There is no associated value.
7000 # String conversion function implementations
7002 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7003 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7004 # This value cannot be modified here.
7007 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7008 # CYGINT_ISO_STDLIB_STRCONV == 1
7011 # The following properties are affected by this value
7012 # interface CYGINT_ISO_STDLIB_STRCONV
7013 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7016 # String conversion function implementation header
7018 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7020 # No user value, uncomment the following line to provide one.
7022 # The inferred value should not be edited directly.
7023 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7024 # value_source inferred
7025 # Default value: 0 0
7027 # The following properties are affected by this value
7028 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7029 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7032 # String to FP conversion function implementations
7034 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7035 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7036 # This value cannot be modified here.
7039 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7040 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7043 # The following properties are affected by this value
7044 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7045 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7048 # String to FP conversion function implementation header
7050 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7052 # No user value, uncomment the following line to provide one.
7054 # value_source default
7055 # Default value: 0 0
7058 # Random number generator implementations
7060 cdl_interface CYGINT_ISO_RAND {
7061 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7062 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7063 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7064 # This value cannot be modified here.
7067 # Requires: 1 >= CYGINT_ISO_RAND
7068 # CYGINT_ISO_RAND == 1
7071 # The following properties are affected by this value
7072 # interface CYGINT_ISO_RAND
7073 # Requires: 1 >= CYGINT_ISO_RAND
7076 # Random number generator implementation header
7078 cdl_option CYGBLD_ISO_RAND_HEADER {
7080 # No user value, uncomment the following line to provide one.
7082 # value_source default
7083 # Default value: 0 0
7086 # Malloc implementations
7088 cdl_interface CYGINT_ISO_MALLOC {
7089 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7090 # This value cannot be modified here.
7093 # Requires: 1 >= CYGINT_ISO_MALLOC
7094 # CYGINT_ISO_MALLOC == 1
7097 # The following properties are affected by this value
7098 # interface CYGINT_ISO_MALLOC
7099 # Requires: 1 >= CYGINT_ISO_MALLOC
7100 # option CYGFUN_LIBC_STRING_STRDUP
7101 # ActiveIf: CYGINT_ISO_MALLOC
7104 # Malloc implementation header
7106 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7108 # No user value, uncomment the following line to provide one.
7110 # value_source default
7111 # Default value: 0 0
7114 # Mallinfo() implementations
7116 cdl_interface CYGINT_ISO_MALLINFO {
7117 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7118 # This value cannot be modified here.
7121 # Requires: 1 >= CYGINT_ISO_MALLINFO
7122 # CYGINT_ISO_MALLINFO == 1
7125 # The following properties are affected by this value
7126 # interface CYGINT_ISO_MALLINFO
7127 # Requires: 1 >= CYGINT_ISO_MALLINFO
7130 # Mallinfo() implementation header
7132 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7134 # No user value, uncomment the following line to provide one.
7136 # value_source default
7137 # Default value: 0 0
7140 # Program exit functionality implementations
7142 cdl_interface CYGINT_ISO_EXIT {
7143 # No options implement this inferface
7144 # This value cannot be modified here.
7147 # Requires: 1 >= CYGINT_ISO_EXIT
7148 # CYGINT_ISO_EXIT == 0
7151 # The following properties are affected by this value
7152 # interface CYGINT_ISO_EXIT
7153 # Requires: 1 >= CYGINT_ISO_EXIT
7154 # option CYGFUN_INFRA_DUMMY_ABORT
7155 # Requires: !CYGINT_ISO_EXIT
7156 # option CYGFUN_INFRA_DUMMY_ABORT
7157 # DefaultValue: CYGINT_ISO_EXIT == 0
7160 # Program exit functionality implementation header
7162 cdl_option CYGBLD_ISO_EXIT_HEADER {
7164 # No user value, uncomment the following line to provide one.
7166 # value_source default
7167 # Default value: 0 0
7170 # Program environment implementations
7172 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7173 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7174 # This value cannot be modified here.
7177 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7178 # CYGINT_ISO_STDLIB_ENVIRON == 1
7181 # The following properties are affected by this value
7182 # interface CYGINT_ISO_STDLIB_ENVIRON
7183 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7186 # Program environment implementation header
7188 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7190 # No user value, uncomment the following line to provide one.
7192 # value_source default
7193 # Default value: 0 0
7196 # system() implementations
7198 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7199 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7200 # This value cannot be modified here.
7203 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7204 # CYGINT_ISO_STDLIB_SYSTEM == 1
7207 # The following properties are affected by this value
7208 # interface CYGINT_ISO_STDLIB_SYSTEM
7209 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7212 # system() implementation header
7214 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7216 # No user value, uncomment the following line to provide one.
7218 # value_source default
7219 # Default value: 0 0
7222 # bsearch() implementations
7224 cdl_interface CYGINT_ISO_BSEARCH {
7225 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7226 # This value cannot be modified here.
7229 # Requires: 1 >= CYGINT_ISO_BSEARCH
7230 # CYGINT_ISO_BSEARCH == 1
7233 # The following properties are affected by this value
7234 # interface CYGINT_ISO_BSEARCH
7235 # Requires: 1 >= CYGINT_ISO_BSEARCH
7238 # bsearch() implementation header
7240 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7242 # No user value, uncomment the following line to provide one.
7244 # value_source default
7245 # Default value: 0 0
7248 # qsort() implementations
7250 cdl_interface CYGINT_ISO_QSORT {
7251 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7252 # This value cannot be modified here.
7255 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7256 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7259 # The following properties are affected by this value
7262 # qsort() implementation header
7264 cdl_option CYGBLD_ISO_QSORT_HEADER {
7266 # No user value, uncomment the following line to provide one.
7268 # value_source default
7269 # Default value: 0 0
7272 # abs()/labs() implementations
7274 cdl_interface CYGINT_ISO_ABS {
7275 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7276 # This value cannot be modified here.
7279 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7280 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7283 # The following properties are affected by this value
7286 # abs()/labs() implementation header
7288 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7290 # No user value, uncomment the following line to provide one.
7292 # The inferred value should not be edited directly.
7293 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7294 # value_source inferred
7295 # Default value: 0 0
7297 # The following properties are affected by this value
7298 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7299 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7302 # div()/ldiv() implementations
7304 cdl_interface CYGINT_ISO_DIV {
7305 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7306 # This value cannot be modified here.
7309 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7310 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7313 # The following properties are affected by this value
7316 # div()/ldiv() implementation header
7318 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7320 # No user value, uncomment the following line to provide one.
7322 # The inferred value should not be edited directly.
7323 inferred_value 1 <cyg/libc/stdlib/div.inl>
7324 # value_source inferred
7325 # Default value: 0 0
7327 # The following properties are affected by this value
7328 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7329 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7332 # Header defining the implementation's MB_CUR_MAX
7334 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7336 # No user value, uncomment the following line to provide one.
7338 # value_source default
7339 # Default value: 0 0
7341 # The following properties are affected by this value
7342 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7343 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7346 # Multibyte character implementations
7348 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7349 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7350 # This value cannot be modified here.
7353 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7354 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7357 # The following properties are affected by this value
7358 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7359 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7362 # Multibyte character implementation header
7364 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7366 # No user value, uncomment the following line to provide one.
7368 # value_source default
7369 # Default value: 0 0
7375 cdl_component CYGPKG_ISO_STRING {
7376 # There is no associated value.
7380 # Number of implementations of strerror() function
7382 cdl_interface CYGINT_ISO_STRERROR {
7383 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7384 # This value cannot be modified here.
7386 # Current value: 1 1
7387 # Requires: 1 >= CYGINT_ISO_STRERROR
7388 # CYGINT_ISO_STRERROR == 1
7391 # The following properties are affected by this value
7392 # interface CYGINT_ISO_STRERROR
7393 # Requires: 1 >= CYGINT_ISO_STRERROR
7396 # strerror() implementation header
7398 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7400 # No user value, uncomment the following line to provide one.
7402 # The inferred value should not be edited directly.
7403 inferred_value 1 <cyg/error/strerror.h>
7404 # value_source inferred
7405 # Default value: 0 0
7407 # The following properties are affected by this value
7408 # option CYGPKG_ERROR_STRERROR
7409 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7412 # memcpy() implementation header
7414 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7416 # No user value, uncomment the following line to provide one.
7418 # value_source default
7419 # Default value: 0 0
7422 # memset() implementation header
7424 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7426 # No user value, uncomment the following line to provide one.
7428 # value_source default
7429 # Default value: 0 0
7432 # Number of implementations of strtok_r() function
7434 cdl_interface CYGINT_ISO_STRTOK_R {
7435 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7436 # This value cannot be modified here.
7438 # Current value: 1 1
7439 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7440 # CYGINT_ISO_STRTOK_R == 1
7443 # The following properties are affected by this value
7444 # interface CYGINT_ISO_STRTOK_R
7445 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7448 # strtok_r() implementation header
7450 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7452 # No user value, uncomment the following line to provide one.
7454 # The inferred value should not be edited directly.
7455 inferred_value 1 <cyg/libc/string/string.h>
7456 # value_source inferred
7457 # Default value: 0 0
7459 # The following properties are affected by this value
7460 # package CYGPKG_LIBC_STRING
7461 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7464 # Number of implementations of locale-specific string functions
7465 # This covers locale-dependent string functions such as strcoll()
7468 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7469 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7470 # This value cannot be modified here.
7472 # Current value: 1 1
7473 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7474 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7477 # The following properties are affected by this value
7478 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7479 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7482 # Locale-specific string functions' implementation header
7483 # This covers locale-dependent string functions such as strcoll()
7486 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7488 # No user value, uncomment the following line to provide one.
7490 # The inferred value should not be edited directly.
7491 inferred_value 1 <cyg/libc/string/string.h>
7492 # value_source inferred
7493 # Default value: 0 0
7495 # The following properties are affected by this value
7496 # package CYGPKG_LIBC_STRING
7497 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7500 # Number of implementations of BSD string functions
7502 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7503 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7504 # This value cannot be modified here.
7506 # Current value: 0 0
7507 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7508 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7511 # The following properties are affected by this value
7512 # interface CYGINT_ISO_STRING_BSD_FUNCS
7513 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7516 # BSD string functions' implementation header
7518 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7520 # No user value, uncomment the following line to provide one.
7522 # The inferred value should not be edited directly.
7523 inferred_value 1 <cyg/libc/string/bsdstring.h>
7524 # value_source inferred
7525 # Default value: 0 0
7527 # The following properties are affected by this value
7528 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7529 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7532 # Number of implementations of other mem*() functions
7534 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7535 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7536 # This value cannot be modified here.
7538 # Current value: 1 1
7539 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7540 # CYGINT_ISO_STRING_MEMFUNCS == 1
7543 # The following properties are affected by this value
7544 # interface CYGINT_ISO_STRING_MEMFUNCS
7545 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7546 # component CYGBLD_BUILD_REDBOOT
7547 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7548 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7549 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7552 # Other mem*() functions' implementation header
7554 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7556 # No user value, uncomment the following line to provide one.
7558 # The inferred value should not be edited directly.
7559 inferred_value 1 <cyg/libc/string/string.h>
7560 # value_source inferred
7561 # Default value: 0 0
7563 # The following properties are affected by this value
7564 # package CYGPKG_LIBC_STRING
7565 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7568 # Number of implementations of other ISO C str*() functions
7569 # This covers the other str*() functions defined by ISO C.
7571 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7572 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7573 # This value cannot be modified here.
7575 # Current value: 1 1
7576 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7577 # CYGINT_ISO_STRING_STRFUNCS == 1
7580 # The following properties are affected by this value
7581 # interface CYGINT_ISO_STRING_STRFUNCS
7582 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7583 # option CYGFUN_INFRA_DUMMY_STRLEN
7584 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7585 # option CYGFUN_INFRA_DUMMY_STRLEN
7586 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7587 # component CYGBLD_BUILD_REDBOOT
7588 # Requires: CYGINT_ISO_STRING_STRFUNCS
7589 # component CYGPKG_IO_ETH_DRIVERS_NET
7590 # Requires: CYGINT_ISO_STRING_STRFUNCS
7591 # option CYGFUN_COMPRESS_ZLIB_GZIO
7592 # Requires: CYGINT_ISO_STRING_STRFUNCS
7593 # package CYGPKG_IO_FLASH
7594 # Requires: CYGINT_ISO_STRING_STRFUNCS
7595 # package CYGPKG_LIBC_STDLIB
7596 # Requires: CYGINT_ISO_STRING_STRFUNCS
7599 # Other ISO C str*() functions' implementation header
7600 # This covers the other str*() functions defined by ISO C.
7602 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7604 # No user value, uncomment the following line to provide one.
7606 # The inferred value should not be edited directly.
7607 inferred_value 1 <cyg/libc/string/string.h>
7608 # value_source inferred
7609 # Default value: 0 0
7611 # The following properties are affected by this value
7612 # package CYGPKG_LIBC_STRING
7613 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7617 # Clock and time functionality
7619 cdl_component CYGPKG_ISO_TIME {
7620 # There is no associated value.
7624 # time_t implementation header
7626 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7628 # No user value, uncomment the following line to provide one.
7630 # value_source default
7631 # Default value: 0 0
7634 # clock_t implementation header
7636 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7638 # No user value, uncomment the following line to provide one.
7640 # value_source default
7641 # Default value: 0 0
7644 # struct timeval implementation header
7646 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7648 # No user value, uncomment the following line to provide one.
7650 # value_source default
7651 # Default value: 0 0
7654 # fnmatch implementation header
7656 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7658 # No user value, uncomment the following line to provide one.
7660 # value_source default
7661 # Default value: 0 0
7664 # Number of implementations of POSIX timer types
7666 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7667 # No options implement this inferface
7668 # This value cannot be modified here.
7670 # Current value: 0 0
7671 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7672 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7675 # The following properties are affected by this value
7676 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7677 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7680 # POSIX timer types implementation header
7682 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7684 # No user value, uncomment the following line to provide one.
7686 # value_source default
7687 # Default value: 0 0
7690 # Number of implementations of POSIX clock types
7692 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7693 # No options implement this inferface
7694 # This value cannot be modified here.
7696 # Current value: 0 0
7697 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7698 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7701 # The following properties are affected by this value
7702 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7703 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7706 # POSIX clock types implementation header
7708 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7710 # No user value, uncomment the following line to provide one.
7712 # value_source default
7713 # Default value: 0 0
7716 # Number of implementations of ISO C types
7718 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7719 # No options implement this inferface
7720 # This value cannot be modified here.
7722 # Current value: 0 0
7723 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7724 # CYGINT_ISO_C_TIME_TYPES == 0
7727 # The following properties are affected by this value
7728 # interface CYGINT_ISO_C_TIME_TYPES
7729 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7732 # ISO C time types implementation header
7734 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7736 # No user value, uncomment the following line to provide one.
7738 # value_source default
7739 # Default value: 0 0
7742 # Number of implementations of POSIX timers
7744 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7745 # No options implement this inferface
7746 # This value cannot be modified here.
7748 # Current value: 0 0
7749 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7750 # CYGINT_ISO_POSIX_TIMERS == 0
7753 # The following properties are affected by this value
7754 # interface CYGINT_ISO_POSIX_TIMERS
7755 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7758 # POSIX timer implementation header
7760 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7762 # No user value, uncomment the following line to provide one.
7764 # value_source default
7765 # Default value: 0 0
7768 # Number of implementations of POSIX clocks
7770 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7771 # No options implement this inferface
7772 # This value cannot be modified here.
7774 # Current value: 0 0
7775 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7776 # CYGINT_ISO_POSIX_CLOCKS == 0
7779 # The following properties are affected by this value
7780 # interface CYGINT_ISO_POSIX_CLOCKS
7781 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7784 # POSIX clocks implementation header
7786 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7788 # No user value, uncomment the following line to provide one.
7790 # value_source default
7791 # Default value: 0 0
7794 # Number of implementations of ISO C clock functions
7796 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7797 # No options implement this inferface
7798 # This value cannot be modified here.
7800 # Current value: 0 0
7801 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7802 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7805 # The following properties are affected by this value
7806 # interface CYGINT_ISO_C_CLOCK_FUNCS
7807 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7810 # ISO C clock functions' implementation header
7812 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7814 # No user value, uncomment the following line to provide one.
7816 # value_source default
7817 # Default value: 0 0
7820 # Number of implementations of tzset() function
7822 cdl_interface CYGINT_ISO_TZSET {
7823 # No options implement this inferface
7824 # This value cannot be modified here.
7826 # Current value: 0 0
7827 # Requires: 1 >= CYGINT_ISO_TZSET
7828 # CYGINT_ISO_TZSET == 0
7831 # The following properties are affected by this value
7832 # interface CYGINT_ISO_TZSET
7833 # Requires: 1 >= CYGINT_ISO_TZSET
7836 # tzset() implementation header
7838 cdl_option CYGBLD_ISO_TZSET_HEADER {
7840 # No user value, uncomment the following line to provide one.
7842 # value_source default
7843 # Default value: 0 0
7847 # Signal functionality
7849 cdl_component CYGPKG_ISO_SIGNAL {
7850 # There is no associated value.
7854 # Number of implementations of signal numbers
7856 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7857 # No options implement this inferface
7858 # This value cannot be modified here.
7861 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7862 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7865 # The following properties are affected by this value
7866 # interface CYGINT_ISO_SIGNAL_NUMBERS
7867 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7870 # Signal numbering implementation header
7871 # This header provides the mapping of signal
7872 # names (e.g. SIGBUS) to numbers.
7874 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7876 # No user value, uncomment the following line to provide one.
7878 # value_source default
7879 # Default value: 0 0
7882 # Number of signal implementations
7884 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7885 # No options implement this inferface
7886 # This value cannot be modified here.
7889 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7890 # CYGINT_ISO_SIGNAL_IMPL == 0
7893 # The following properties are affected by this value
7894 # interface CYGINT_ISO_SIGNAL_IMPL
7895 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7898 # Signals implementation header
7900 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7902 # No user value, uncomment the following line to provide one.
7904 # value_source default
7905 # Default value: 0 0
7908 # POSIX real time signals feature test macro
7909 # This defines the POSIX feature test macro
7910 # that indicates that the POSIX real time signals
7913 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7914 # No options implement this inferface
7915 # This value cannot be modified here.
7918 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7919 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7922 # The following properties are affected by this value
7923 # interface CYGINT_POSIX_REALTIME_SIGNALS
7924 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7928 # Non-local jumps functionality
7930 cdl_component CYGPKG_ISO_SETJMP {
7931 # There is no associated value.
7935 # setjmp() / longjmp() implementations
7937 cdl_interface CYGINT_ISO_SETJMP {
7938 # No options implement this inferface
7939 # This value cannot be modified here.
7942 # Requires: 1 >= CYGINT_ISO_SETJMP
7943 # CYGINT_ISO_SETJMP == 0
7946 # The following properties are affected by this value
7947 # interface CYGINT_ISO_SETJMP
7948 # Requires: 1 >= CYGINT_ISO_SETJMP
7951 # setjmp() / longjmp() implementation header
7953 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7955 # No user value, uncomment the following line to provide one.
7957 # value_source default
7958 # Default value: 0 0
7961 # sigsetjmp() / siglongjmp() implementations
7963 cdl_interface CYGINT_ISO_SIGSETJMP {
7964 # No options implement this inferface
7965 # This value cannot be modified here.
7968 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7969 # CYGINT_ISO_SIGSETJMP == 0
7972 # The following properties are affected by this value
7973 # interface CYGINT_ISO_SIGSETJMP
7974 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7977 # sigsetjmp() / siglongjmp() implementation header
7979 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7981 # No user value, uncomment the following line to provide one.
7983 # value_source default
7984 # Default value: 0 0
7988 # Assertions implementation header
7990 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7992 # No user value, uncomment the following line to provide one.
7994 # value_source default
7995 # Default value: 0 0
7998 # POSIX file control
7999 # This covers the POSIX file control definitions,
8000 # normally found in <fcntl.h>
8002 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8003 # There is no associated value.
8007 # POSIX open flags implementation header
8009 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8011 # No user value, uncomment the following line to provide one.
8013 # value_source default
8014 # Default value: 0 0
8017 # POSIX fcntl() implementations
8019 cdl_interface CYGINT_ISO_FCNTL {
8020 # No options implement this inferface
8021 # This value cannot be modified here.
8024 # Requires: 1 >= CYGINT_ISO_FCNTL
8025 # CYGINT_ISO_FCNTL == 0
8028 # The following properties are affected by this value
8029 # interface CYGINT_ISO_FCNTL
8030 # Requires: 1 >= CYGINT_ISO_FCNTL
8033 # POSIX fcntl() implementation header
8035 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8037 # No user value, uncomment the following line to provide one.
8039 # value_source default
8040 # Default value: 0 0
8043 # POSIX file open implementations
8045 cdl_interface CYGINT_ISO_OPEN {
8046 # No options implement this inferface
8047 # This value cannot be modified here.
8050 # Requires: 1 >= CYGINT_ISO_OPEN
8051 # CYGINT_ISO_OPEN == 0
8054 # The following properties are affected by this value
8055 # interface CYGINT_ISO_OPEN
8056 # Requires: 1 >= CYGINT_ISO_OPEN
8059 # POSIX file open implementation header
8061 cdl_option CYGBLD_ISO_OPEN_HEADER {
8063 # No user value, uncomment the following line to provide one.
8065 # value_source default
8066 # Default value: 0 0
8070 # <sys/stat.h> definitions implementation header
8072 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8074 # No user value, uncomment the following line to provide one.
8076 # value_source default
8077 # Default value: 0 0
8080 # POSIX directory reading implementation
8082 cdl_interface CYGINT_ISO_DIRENT {
8083 # No options implement this inferface
8084 # This value cannot be modified here.
8087 # Requires: 1 >= CYGINT_ISO_DIRENT
8088 # CYGINT_ISO_DIRENT == 0
8091 # The following properties are affected by this value
8092 # interface CYGINT_ISO_DIRENT
8093 # Requires: 1 >= CYGINT_ISO_DIRENT
8096 # <dirent.h> definitions implementation header
8098 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8100 # No user value, uncomment the following line to provide one.
8102 # value_source default
8103 # Default value: 0 0
8106 # POSIX <sys/types.h> contents
8107 # This covers the types required by POSIX to be in
8110 cdl_component CYGPKG_ISO_POSIX_TYPES {
8111 # There is no associated value.
8115 # POSIX thread types implementations
8117 cdl_interface CYGINT_ISO_PTHREADTYPES {
8118 # No options implement this inferface
8119 # This value cannot be modified here.
8122 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8123 # CYGINT_ISO_PTHREADTYPES == 0
8126 # The following properties are affected by this value
8127 # interface CYGINT_ISO_PTHREADTYPES
8128 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8129 # interface CYGINT_ISO_PMUTEXTYPES
8130 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8133 # POSIX thread types implementation header
8135 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8137 # No user value, uncomment the following line to provide one.
8139 # value_source default
8140 # Default value: 0 0
8143 # POSIX mutex types implementations
8145 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8146 # No options implement this inferface
8147 # This value cannot be modified here.
8150 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8151 # CYGINT_ISO_PTHREADTYPES == 0
8155 # POSIX mutex types implementation header
8157 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8159 # No user value, uncomment the following line to provide one.
8161 # value_source default
8162 # Default value: 0 0
8165 # ssize_t implementation header
8167 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8169 # No user value, uncomment the following line to provide one.
8171 # value_source default
8172 # Default value: 0 0
8175 # Filesystem types implementation header
8177 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8179 # No user value, uncomment the following line to provide one.
8181 # value_source default
8182 # Default value: 0 0
8185 # gid_t, pid_t, uid_t implementation header
8187 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8189 # No user value, uncomment the following line to provide one.
8191 # value_source default
8192 # Default value: 0 0
8196 # Non-POSIX <sys/types.h> contents
8197 # This covers the extra types required by non-POSIX
8198 # packages to be in <sys/types.h>. These would normally
8199 # only be visible if _POSIX_SOURCE is not defined.
8201 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8202 # There is no associated value.
8206 # BSD compatible types
8208 cdl_interface CYGINT_ISO_BSDTYPES {
8209 # No options implement this inferface
8210 # This value cannot be modified here.
8213 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8214 # CYGINT_ISO_BSDTYPES == 0
8217 # The following properties are affected by this value
8218 # interface CYGINT_ISO_BSDTYPES
8219 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8224 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8226 # No user value, uncomment the following line to provide one.
8228 # value_source default
8229 # Default value: 0 0
8235 cdl_component CYGPKG_ISO_UTSNAME {
8236 # There is no associated value.
8242 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8244 # No user value, uncomment the following line to provide one.
8246 # value_source default
8247 # Default value: 0 0
8253 cdl_component CYGPKG_ISO_SCHED {
8254 # There is no associated value.
8258 # POSIX scheduler implementations
8260 cdl_interface CYGINT_ISO_SCHED_IMPL {
8261 # No options implement this inferface
8262 # This value cannot be modified here.
8265 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8266 # CYGINT_ISO_SCHED_IMPL == 0
8269 # The following properties are affected by this value
8270 # interface CYGINT_ISO_SCHED_IMPL
8271 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8274 # POSIX scheduler implementation header
8276 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8278 # No user value, uncomment the following line to provide one.
8280 # value_source default
8281 # Default value: 0 0
8287 cdl_component CYGPKG_ISO_SEMAPHORES {
8288 # There is no associated value.
8292 # POSIX semaphore implementations
8294 cdl_interface CYGINT_ISO_SEMAPHORES {
8295 # No options implement this inferface
8296 # This value cannot be modified here.
8299 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8300 # CYGINT_ISO_SEMAPHORES == 0
8303 # The following properties are affected by this value
8304 # interface CYGINT_ISO_SEMAPHORES
8305 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8308 # POSIX semaphore implementation header
8310 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8312 # No user value, uncomment the following line to provide one.
8314 # value_source default
8315 # Default value: 0 0
8319 # POSIX message queues
8321 cdl_component CYGPKG_ISO_MQUEUE {
8322 # There is no associated value.
8328 cdl_interface CYGINT_ISO_MQUEUE {
8329 # No options implement this inferface
8330 # This value cannot be modified here.
8333 # Requires: 1 >= CYGINT_ISO_MQUEUE
8334 # CYGINT_ISO_MQUEUE == 0
8337 # The following properties are affected by this value
8338 # interface CYGINT_ISO_MQUEUE
8339 # Requires: 1 >= CYGINT_ISO_MQUEUE
8340 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8341 # ActiveIf: CYGINT_ISO_MQUEUE
8342 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8343 # ActiveIf: CYGINT_ISO_MQUEUE
8346 # Implementation header
8348 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8350 # No user value, uncomment the following line to provide one.
8352 # value_source default
8353 # Default value: 0 0
8356 # Maximum number of open message queues
8358 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8359 # This option is not active
8360 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8361 # CYGINT_ISO_MQUEUE == 0
8365 # No user value, uncomment the following line to provide one.
8367 # value_source default
8368 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8369 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8370 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8374 # Maximum number of message priorities
8376 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8377 # This option is not active
8378 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8379 # CYGINT_ISO_MQUEUE == 0
8383 # No user value, uncomment the following line to provide one.
8384 # user_value 1 65535
8385 # value_source default
8386 # Default value: 1 65535
8392 cdl_component CYGPKG_ISO_PTHREAD {
8393 # There is no associated value.
8397 # POSIX pthread implementations
8399 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8400 # No options implement this inferface
8401 # This value cannot be modified here.
8403 # Current value: 0 0
8404 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8405 # CYGINT_ISO_PTHREAD_IMPL == 0
8408 # The following properties are affected by this value
8409 # interface CYGINT_ISO_PTHREAD_IMPL
8410 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8413 # POSIX pthread implementation header
8415 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8417 # No user value, uncomment the following line to provide one.
8419 # value_source default
8420 # Default value: 0 0
8423 # POSIX mutex/cond var implementations
8425 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8426 # No options implement this inferface
8427 # This value cannot be modified here.
8429 # Current value: 0 0
8430 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8431 # CYGINT_ISO_PTHREAD_MUTEX == 0
8434 # The following properties are affected by this value
8435 # interface CYGINT_ISO_PTHREAD_MUTEX
8436 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8439 # POSIX mutex/cond var implementation header
8441 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8443 # No user value, uncomment the following line to provide one.
8445 # value_source default
8446 # Default value: 0 0
8452 cdl_component CYGPKG_ISO_LIMITS {
8453 # There is no associated value.
8457 # POSIX pthread limits implementations
8459 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8460 # No options implement this inferface
8461 # This value cannot be modified here.
8464 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8465 # CYGINT_ISO_POSIX_LIMITS == 0
8468 # The following properties are affected by this value
8469 # interface CYGINT_ISO_POSIX_LIMITS
8470 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8473 # POSIX pthread limits implementation header
8475 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8477 # No user value, uncomment the following line to provide one.
8479 # value_source default
8480 # Default value: 0 0
8483 # OPEN_MAX implementation header
8485 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8487 # No user value, uncomment the following line to provide one.
8489 # value_source default
8490 # Default value: 0 0
8493 # LINK_MAX implementation header
8495 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8497 # No user value, uncomment the following line to provide one.
8499 # value_source default
8500 # Default value: 0 0
8503 # NAME_MAX implementation header
8505 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8507 # No user value, uncomment the following line to provide one.
8509 # value_source default
8510 # Default value: 0 0
8513 # PATH_MAX implementation header
8515 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8517 # No user value, uncomment the following line to provide one.
8519 # value_source default
8520 # Default value: 0 0
8526 cdl_component CYGPKG_ISO_TERMIOS {
8527 # There is no associated value.
8531 # POSIX termios implementations
8533 cdl_interface CYGINT_ISO_TERMIOS {
8534 # No options implement this inferface
8535 # This value cannot be modified here.
8538 # Requires: 1 >= CYGINT_ISO_TERMIOS
8539 # CYGINT_ISO_TERMIOS == 0
8542 # The following properties are affected by this value
8543 # interface CYGINT_ISO_TERMIOS
8544 # Requires: 1 >= CYGINT_ISO_TERMIOS
8547 # POSIX termios implementation header
8549 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8551 # No user value, uncomment the following line to provide one.
8553 # value_source default
8554 # Default value: 0 0
8560 cdl_component CYGPKG_ISO_DLFCN {
8561 # There is no associated value.
8565 # Dynamic load implementations
8567 cdl_interface CYGINT_ISO_DLFCN {
8568 # No options implement this inferface
8569 # This value cannot be modified here.
8572 # Requires: 1 >= CYGINT_ISO_DLFCN
8573 # CYGINT_ISO_DLFCN == 0
8576 # The following properties are affected by this value
8577 # interface CYGINT_ISO_DLFCN
8578 # Requires: 1 >= CYGINT_ISO_DLFCN
8581 # Dynamic load implementation header
8583 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8585 # No user value, uncomment the following line to provide one.
8587 # value_source default
8588 # Default value: 0 0
8592 # UNIX standard functions
8594 cdl_component CYGPKG_ISO_UNISTD {
8595 # There is no associated value.
8599 # POSIX timer operations implementations
8601 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8602 # No options implement this inferface
8603 # This value cannot be modified here.
8605 # Current value: 0 0
8606 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8607 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8610 # The following properties are affected by this value
8611 # interface CYGINT_ISO_POSIX_TIMER_OPS
8612 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8615 # POSIX timer operations implementation header
8617 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8619 # No user value, uncomment the following line to provide one.
8621 # value_source default
8622 # Default value: 0 0
8625 # POSIX sleep() implementations
8627 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8628 # No options implement this inferface
8629 # This value cannot be modified here.
8631 # Current value: 0 0
8632 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8633 # CYGINT_ISO_POSIX_SLEEP == 0
8636 # The following properties are affected by this value
8637 # interface CYGINT_ISO_POSIX_SLEEP
8638 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8641 # POSIX sleep() implementation header
8643 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8645 # No user value, uncomment the following line to provide one.
8647 # value_source default
8648 # Default value: 0 0
8652 # select()/poll() functions
8654 cdl_component CYGPKG_ISO_SELECT {
8655 # There is no associated value.
8659 # select() implementations
8661 cdl_interface CYGINT_ISO_SELECT {
8662 # No options implement this inferface
8663 # This value cannot be modified here.
8665 # Current value: 0 0
8666 # Requires: 1 >= CYGINT_ISO_SELECT
8667 # CYGINT_ISO_SELECT == 0
8670 # The following properties are affected by this value
8671 # interface CYGINT_ISO_SELECT
8672 # Requires: 1 >= CYGINT_ISO_SELECT
8675 # select() implementation header
8677 cdl_option CYGBLD_ISO_SELECT_HEADER {
8679 # No user value, uncomment the following line to provide one.
8681 # value_source default
8682 # Default value: 0 0
8685 # poll() implementations
8687 cdl_interface CYGINT_ISO_POLL {
8688 # No options implement this inferface
8689 # This value cannot be modified here.
8691 # Current value: 0 0
8692 # Requires: 1 >= CYGINT_ISO_POLL
8693 # CYGINT_ISO_POLL == 0
8696 # The following properties are affected by this value
8697 # interface CYGINT_ISO_POLL
8698 # Requires: 1 >= CYGINT_ISO_POLL
8701 # poll() implementation header
8703 cdl_option CYGBLD_ISO_POLL_HEADER {
8705 # No user value, uncomment the following line to provide one.
8707 # value_source default
8708 # Default value: 0 0
8712 # NetDB utility functions
8714 cdl_component CYGPKG_ISO_NETDB {
8715 # There is no associated value.
8719 # DNS implementations
8721 cdl_interface CYGINT_ISO_DNS {
8722 # No options implement this inferface
8723 # This value cannot be modified here.
8726 # Requires: 1 >= CYGINT_ISO_DNS
8727 # CYGINT_ISO_DNS == 0
8730 # The following properties are affected by this value
8731 # interface CYGINT_ISO_DNS
8732 # Requires: 1 >= CYGINT_ISO_DNS
8735 # DNS implementation header
8737 cdl_option CYGBLD_ISO_DNS_HEADER {
8739 # No user value, uncomment the following line to provide one.
8741 # value_source default
8742 # Default value: 0 0
8745 # Protocol network database implementations
8747 cdl_interface CYGINT_ISO_NETDB_PROTO {
8748 # No options implement this inferface
8749 # This value cannot be modified here.
8752 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8753 # CYGINT_ISO_NETDB_PROTO == 0
8756 # The following properties are affected by this value
8757 # interface CYGINT_ISO_NETDB_PROTO
8758 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8761 # Protocol network database implementation header
8763 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8765 # No user value, uncomment the following line to provide one.
8767 # value_source default
8768 # Default value: 0 0
8771 # Services network database implementations
8773 cdl_interface CYGINT_ISO_NETDB_SERV {
8774 # No options implement this inferface
8775 # This value cannot be modified here.
8778 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8779 # CYGINT_ISO_NETDB_SERV == 0
8782 # The following properties are affected by this value
8783 # interface CYGINT_ISO_NETDB_SERV
8784 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8787 # Services network database implementation header
8789 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8791 # No user value, uncomment the following line to provide one.
8793 # value_source default
8794 # Default value: 0 0
8799 # Package specific build options including control over
8800 # compiler flags used only in building this package,
8801 # and details of which tests are built.
8803 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8804 # There is no associated value.
8808 # Additional compiler flags
8809 # This option modifies the set of compiler flags for
8810 # building the ISO C and POSIX infrastructure package.
8811 # These flags are used in addition to the set of global flags.
8813 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8815 # No user value, uncomment the following line to provide one.
8817 # value_source default
8821 # Suppressed compiler flags
8822 # This option modifies the set of compiler flags for
8823 # building the ISO C and POSIX infrastructure package.
8824 # These flags are removed from the set of global flags
8827 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8829 # No user value, uncomment the following line to provide one.
8831 # value_source default
8838 # doc: ref/services-crc.html
8839 # This package provides support for CRC calculation. Currently
8840 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8841 # Gary S. Brown, and a 16 bit CRC.
8843 cdl_package CYGPKG_CRC {
8844 # Packages cannot be added or removed, nor can their version be changed,
8845 # simply by editing their value. Instead the appropriate configuration
8846 # should be used to perform these actions.
8848 # This value cannot be modified here.
8850 # Current value: 1 current
8852 # The following properties are affected by this value
8853 # package CYGPKG_COMPRESS_ZLIB
8854 # Requires: CYGPKG_CRC
8860 cdl_option CYGPKG_CRC_TESTS {
8861 # Calculated value: "tests/crc_test"
8863 # Current_value: tests/crc_test
8867 # Zlib compress and decompress package
8868 # This package provides support for compression and
8871 cdl_package CYGPKG_COMPRESS_ZLIB {
8872 # Packages cannot be added or removed, nor can their version be changed,
8873 # simply by editing their value. Instead the appropriate configuration
8874 # should be used to perform these actions.
8876 # This value cannot be modified here.
8878 # Current value: 1 current
8879 # Requires: CYGPKG_ISOINFRA
8880 # CYGPKG_ISOINFRA == current
8882 # Requires: CYGPKG_CRC
8883 # CYGPKG_CRC == current
8886 # The following properties are affected by this value
8887 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8888 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8892 # Override memory allocation routines.
8894 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8895 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8896 # This value cannot be modified here.
8900 # The following properties are affected by this value
8901 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8902 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8905 # Should deflate() produce 'gzip' compatible output?
8906 # If this option is set then the output of calling deflate()
8907 # will be wrapped up as a 'gzip' compatible file.
8909 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8911 # No user value, uncomment the following line to provide one.
8913 # value_source default
8917 # Does this library need malloc?
8918 # This pseudo-option will force the memalloc library to be
8919 # required iff the application does not provide it's own
8922 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8923 # This option is not active
8924 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8925 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8929 # No user value, uncomment the following line to provide one.
8931 # value_source default
8933 # Requires: CYGPKG_MEMALLOC
8934 # CYGPKG_MEMALLOC == current
8938 # Include stdio-like utility functions
8939 # This option enables the stdio-like zlib utility functions
8940 # (gzread/gzwrite and friends) provided in gzio.c.
8942 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8944 # No user value, uncomment the following line to provide one.
8946 # value_source default
8947 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8948 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8950 # Requires: CYGINT_ISO_STDIO_FILEPOS
8951 # CYGINT_ISO_STDIO_FILEPOS == 0
8953 # Requires: CYGINT_ISO_STRING_STRFUNCS
8954 # CYGINT_ISO_STRING_STRFUNCS == 1
8956 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8957 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8959 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8960 # CYGINT_ISO_STDIO_FILEACCESS == 0
8964 # Zlib compress and decompress package build options
8965 # Package specific build options including control over
8966 # compiler flags used only in building this package,
8967 # and details of which tests are built.
8969 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8970 # There is no associated value.
8974 # Additional compiler flags
8975 # This option modifies the set of compiler flags for
8976 # building this package. These flags are used in addition
8977 # to the set of global flags.
8979 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8981 # No user value, uncomment the following line to provide one.
8982 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8983 # value_source default
8984 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8987 # Suppressed compiler flags
8988 # This option modifies the set of compiler flags for
8989 # building this package. These flags are removed from
8990 # the set of global flags if present.
8992 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8994 # No user value, uncomment the following line to provide one.
8995 # user_value -Wstrict-prototypes
8996 # value_source default
8997 # Default value: -Wstrict-prototypes
9000 # Additional compiler flags
9001 # This option modifies the set of compiler flags for
9002 # building this package. These flags are used in addition
9003 # to the set of global flags.
9005 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9007 # No user value, uncomment the following line to provide one.
9009 # value_source default
9013 # Suppressed compiler flags
9014 # This option modifies the set of compiler flags for
9015 # building this package. These flags are removed from
9016 # the set of global flags if present.
9018 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9020 # No user value, uncomment the following line to provide one.
9022 # value_source default
9029 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9030 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9032 # Current_value: tests/zlib1.c tests/zlib2.c
9036 # FLASH device drivers
9037 # doc: ref/flash.html
9038 # This option enables drivers for basic I/O services on
9041 cdl_package CYGPKG_IO_FLASH {
9042 # Packages cannot be added or removed, nor can their version be changed,
9043 # simply by editing their value. Instead the appropriate configuration
9044 # should be used to perform these actions.
9046 # This value cannot be modified here.
9048 # Current value: 1 current
9049 # Requires: CYGPKG_ISOINFRA
9050 # CYGPKG_ISOINFRA == current
9052 # Requires: CYGINT_ISO_STRING_STRFUNCS
9053 # CYGINT_ISO_STRING_STRFUNCS == 1
9056 # The following properties are affected by this value
9057 # component CYGSEM_REDBOOT_FLASH_CONFIG
9058 # DefaultValue: CYGPKG_IO_FLASH != 0
9059 # package CYGPKG_DEVS_FLASH_ONMXC
9060 # ActiveIf: CYGPKG_IO_FLASH
9064 # Hardware FLASH device drivers
9065 # This option enables the hardware device drivers
9066 # for the current platform.
9068 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9069 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9070 # This value cannot be modified here.
9074 # The following properties are affected by this value
9075 # component CYGPKG_REDBOOT_FLASH
9076 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9079 # Hardware FLASH device drivers are not in RAM
9080 # Use of this interface is deprecated.
9081 # Drivers should make sure that the functions are
9082 # linked to RAM by putting them in .2ram sections.
9084 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9085 # No options implement this inferface
9086 # This value cannot be modified here.
9088 # Current value: 0 0
9089 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9090 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9093 # The following properties are affected by this value
9094 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9095 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9098 # Hardware can support block locking
9099 # This option will be enabled by devices which can support
9100 # locking (write-protection) of individual blocks.
9102 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9103 # No options implement this inferface
9104 # This value cannot be modified here.
9106 # Current value: 0 0
9108 # The following properties are affected by this value
9109 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9110 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9113 # Hardware cannot support direct access to FLASH memory
9114 # This option will be asserted by devices which cannot support
9115 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9116 # devices). In these cases, the driver must provide an appropriate
9117 # hardware access function.
9119 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9121 # No user value, uncomment the following line to provide one.
9123 # The inferred value should not be edited directly.
9125 # value_source inferred
9127 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9128 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9131 # The following properties are affected by this value
9132 # option CYGPRI_REDBOOT_ZLIB_FLASH
9133 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9134 # component CYGHWR_DEVS_FLASH_MMC
9135 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9136 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9137 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9138 # option CYGHWR_DEVS_FLASH_MMC_SD
9139 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9140 # option CYGHWR_DEVS_FLASH_MXC_NAND
9141 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9144 # Display status messages during flash operations
9145 # Selecting this option will cause the drivers to print status
9146 # messages as various flash operations are undertaken.
9148 cdl_option CYGSEM_IO_FLASH_CHATTER {
9150 # No user value, uncomment the following line to provide one.
9152 # value_source default
9156 # Verify data programmed to flash
9157 # Selecting this option will cause verification of data
9158 # programmed to flash.
9160 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9162 # No user value, uncomment the following line to provide one.
9164 # The inferred value should not be edited directly.
9166 # value_source inferred
9169 # The following properties are affected by this value
9170 # option CYGSEM_IO_FLASH_READ_INDIRECT
9171 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9174 # Platform has flash soft DIP switch write-protect
9175 # Selecting this option will cause the state of a hardware jumper or
9176 # dipswitch to be read by software to determine whether the flash is
9177 # write-protected or not.
9179 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9181 # No user value, uncomment the following line to provide one.
9183 # value_source default
9187 # Instantiate in I/O block device API
9188 # Provides a block device accessible using the standard I/O
9189 # API ( cyg_io_read() etc. )
9191 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9192 # This option is not active
9193 # ActiveIf constraint: CYGPKG_IO
9194 # CYGPKG_IO (unknown) == 0
9198 # No user value, uncomment the following line to provide one.
9200 # value_source default
9205 # Name of flash device 1 block device
9207 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9208 # This option is not active
9209 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9210 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9213 # No user value, uncomment the following line to provide one.
9214 # user_value "\"/dev/flash1\""
9215 # value_source default
9216 # Default value: "\"/dev/flash1\""
9221 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9222 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9223 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9224 # This option is not active
9225 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9227 # This value cannot be modified here.
9230 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9231 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9234 # The following properties are affected by this value
9235 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9236 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9239 # Static configuration
9240 # This configures the flash device 1 block device
9241 # with static base and length
9243 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9244 # This option is not active
9245 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9248 # No user value, uncomment the following line to provide one.
9250 # value_source default
9255 # Start offset from flash base
9256 # This gives the offset from the base of flash which this
9257 # block device corresponds to.
9259 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9260 # This option is not active
9261 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9264 # No user value, uncomment the following line to provide one.
9265 # user_value 0x00100000
9266 # value_source default
9267 # Default value: 0x00100000
9271 # This gives the length of the region of flash given over
9272 # to this block device.
9274 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9275 # This option is not active
9276 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9279 # No user value, uncomment the following line to provide one.
9280 # user_value 0x00100000
9281 # value_source default
9282 # Default value: 0x00100000
9286 # Configuration from FIS
9287 # This configures the flash device 1 block device
9290 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9291 # This option is not active
9292 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9295 # No user value, uncomment the following line to provide one.
9297 # value_source default
9304 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9305 # This option is not active
9306 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9307 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9310 # No user value, uncomment the following line to provide one.
9311 # user_value "\"jffs2\""
9312 # value_source default
9313 # Default value: "\"jffs2\""
9319 # Flash device driver build options
9320 # Package specific build options including control over
9321 # compiler flags used only in building this package,
9322 # and details of which tests are built.
9324 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9325 # There is no associated value.
9329 # Additional compiler flags
9330 # This option modifies the set of compiler flags for
9331 # building the flash device drivers. These flags are used in addition
9332 # to the set of global flags.
9334 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9336 # No user value, uncomment the following line to provide one.
9338 # value_source default
9342 # Suppressed compiler flags
9343 # This option modifies the set of compiler flags for
9344 # building the flash device drivers. These flags are removed from
9345 # the set of global flags if present.
9347 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9349 # No user value, uncomment the following line to provide one.
9351 # value_source default
9355 # Flash device driver tests
9356 # This option specifies the set of tests for the flash device drivers.
9358 cdl_component CYGPKG_IO_FLASH_TESTS {
9359 # Calculated value: "tests/flash1"
9361 # Current_value: tests/flash1
9365 # Start offset from flash base
9366 # This gives the offset from the base of flash where tests
9367 # can be run. It is important to set this correctly, as an
9368 # incorrect value could allow the tests to write over critical
9369 # portions of the FLASH device and possibly render the target
9370 # board totally non-functional.
9372 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9374 # No user value, uncomment the following line to provide one.
9375 # user_value 0x00100000
9376 # value_source default
9377 # Default value: 0x00100000
9381 # This gives the length of the region of flash used for testing.
9383 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9385 # No user value, uncomment the following line to provide one.
9386 # user_value 0x00100000
9387 # value_source default
9388 # Default value: 0x00100000
9393 # Support FLASH memory on Freescale MXC platforms
9395 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9396 # Packages cannot be added or removed, nor can their version be changed,
9397 # simply by editing their value. Instead the appropriate configuration
9398 # should be used to perform these actions.
9400 # ActiveIf constraint: CYGPKG_IO_FLASH
9401 # CYGPKG_IO_FLASH == current
9404 # This value cannot be modified here.
9406 # Current value: 1 current
9410 # MXC platform MMC card support
9411 # When this option is enabled, it indicates MMC card is
9412 # supported on the MXC platforms
9414 cdl_component CYGHWR_DEVS_FLASH_MMC {
9416 # No user value, uncomment the following line to provide one.
9418 # value_source default
9420 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9421 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9424 # The following properties are affected by this value
9425 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9426 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9427 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9428 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9429 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9430 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9431 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9432 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9436 # MXC platform MMC card for newer SDHC controllers
9438 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9439 # This option is not active
9440 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9441 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9442 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9443 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9444 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9445 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9449 # No user value, uncomment the following line to provide one.
9451 # value_source default
9453 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9454 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9458 # MXC platform MMC card for older MMC/SD controllers
9460 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9461 # This option is not active
9462 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9463 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9464 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9465 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9469 # No user value, uncomment the following line to provide one.
9471 # value_source default
9473 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9474 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9479 # MXC platform NOR flash memory support
9480 # When this option is enabled, it indicates NOR flash is
9481 # supported on the MXC platforms
9483 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9485 # No user value, uncomment the following line to provide one.
9487 # The inferred value should not be edited directly.
9489 # value_source inferred
9492 # The following properties are affected by this value
9493 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9494 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9495 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9496 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9497 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9498 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9499 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9500 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9501 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9502 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9505 # MXC platform NAND flash memory support
9506 # When this option is enabled, it indicates NAND flash is
9507 # supported on the MXC platforms
9509 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9511 # No user value, uncomment the following line to provide one.
9513 # The inferred value should not be edited directly.
9515 # value_source inferred
9517 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9518 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9521 # The following properties are affected by this value
9522 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9523 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9524 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9525 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9526 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9527 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9528 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9529 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9530 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9531 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9532 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9533 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9536 # i.MX platform SPI NOR flash memory support
9537 # When this option is enabled, it indicates SPI NOR flash is
9538 # supported on the i.MX platforms
9540 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9542 # No user value, uncomment the following line to provide one.
9544 # value_source default
9546 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9547 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9551 # MXC platform ATA support
9552 # When this option is enabled, it indicates ATA is
9553 # supported on the MXC platforms
9555 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9557 # No user value, uncomment the following line to provide one.
9559 # value_source default
9563 # Use a flash based Bad Block Table
9565 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9566 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9567 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9570 # There is no associated value.
9574 # When this option is enabled, the driver will search for a flash
9575 # based bad block table
9577 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9579 # No user value, uncomment the following line to provide one.
9581 # value_source default
9585 # header file defining the NAND BBT descriptor
9586 # defines the name of the header file that describes the BBT layout
9588 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9590 # No user value, uncomment the following line to provide one.
9592 # The inferred value should not be edited directly.
9593 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9594 # value_source inferred
9595 # Default value: 0 0
9598 # Number of blocks to reserve for BBT
9599 # Number of blocks to reserve for BBT
9601 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9603 # No user value, uncomment the following line to provide one.
9605 # value_source default
9610 # MXC platform multi flash memory support
9611 # When this option is enabled, it indicates multi flashes are
9612 # supported on the MXC platforms (like NAND and NOR)
9614 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9615 # This option is not active
9616 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9617 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9618 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9619 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9620 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9621 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9622 # CYGHWR_DEVS_FLASH_MMC == 0
9623 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9624 # CYGHWR_DEVS_FLASH_MMC == 0
9628 # No user value, uncomment the following line to provide one.
9630 # The inferred value should not be edited directly.
9632 # value_source inferred
9636 # MXC platform NAND flash reset workaround support
9637 # When this option is enabled, it indicates 0xFFFF is used for
9638 # the NAND reset command instead of 0xFF.
9640 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9641 # No options implement this inferface
9642 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9643 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9646 # This value cannot be modified here.
9653 # Dynamic memory allocation
9654 # doc: ref/memalloc.html
9655 # This package provides memory allocator infrastructure required for
9656 # dynamic memory allocators, including the ISO standard malloc
9657 # interface. It also contains some sample implementations.
9659 cdl_package CYGPKG_MEMALLOC {
9660 # Packages cannot be added or removed, nor can their version be changed,
9661 # simply by editing their value. Instead the appropriate configuration
9662 # should be used to perform these actions.
9664 # This value cannot be modified here.
9666 # Current value: 1 current
9668 # The following properties are affected by this value
9669 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9670 # Requires: CYGPKG_MEMALLOC
9674 # Memory allocator implementations
9675 # This component contains configuration options related to the
9676 # various memory allocators available.
9678 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9679 # There is no associated value.
9683 # Fixed block allocator
9684 # This component contains configuration options related to the
9685 # fixed block memory allocator.
9687 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9688 # There is no associated value.
9693 # With this option enabled, this allocator will be
9694 # made thread-safe. Additionally allocation functions
9695 # are made available that allow a thread to wait
9696 # until memory is available.
9698 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9699 # This option is not active
9700 # ActiveIf constraint: CYGPKG_KERNEL
9701 # CYGPKG_KERNEL (unknown) == 0
9705 # No user value, uncomment the following line to provide one.
9707 # value_source default
9712 # Simple variable block allocator
9713 # This component contains configuration options related to the
9714 # simple variable block memory allocator. This allocator is not
9715 # very fast, and in particular does not scale well with large
9716 # numbers of allocations. It is however very compact in terms of
9717 # code size and does not have very much overhead per allocation.
9719 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9720 # There is no associated value.
9725 # With this option enabled, this allocator will be
9726 # made thread-safe. Additionally allocation functions
9727 # are added that allow a thread to wait until memory
9728 # are made available that allow a thread to wait
9729 # until memory is available.
9731 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9732 # This option is not active
9733 # ActiveIf constraint: CYGPKG_KERNEL
9734 # CYGPKG_KERNEL (unknown) == 0
9738 # No user value, uncomment the following line to provide one.
9740 # value_source default
9745 # The variable-block memory allocator can perform coalescing
9746 # of memory whenever the application code releases memory back
9747 # to the pool. This coalescing reduces the possibility of
9748 # memory fragmentation problems, but involves extra code and
9751 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9753 # No user value, uncomment the following line to provide one.
9755 # value_source default
9758 # The following properties are affected by this value
9759 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9760 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9765 # This component contains configuration options related to the
9766 # port of Doug Lea's memory allocator, normally known as
9767 # dlmalloc. dlmalloc has a reputation for being both fast
9768 # and space-conserving, as well as resisting fragmentation well.
9769 # It is a common choice for a general purpose allocator and
9770 # has been used in both newlib and Linux glibc.
9772 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9773 # There is no associated value.
9778 # Doug Lea's malloc implementation has substantial amounts
9779 # of internal checking in order to verify the operation
9780 # and consistency of the allocator. However this imposes
9781 # substantial overhead on each operation. Therefore this
9782 # checking may be individually disabled.
9784 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9786 # No user value, uncomment the following line to provide one.
9788 # value_source default
9789 # Default value: 0 != CYGDBG_USE_ASSERTS
9790 # CYGDBG_USE_ASSERTS == 0
9792 # Requires: CYGDBG_USE_ASSERTS
9793 # CYGDBG_USE_ASSERTS == 0
9798 # With this option enabled, this allocator will be
9799 # made thread-safe. Additionally allocation functions
9800 # are made available that allow a thread to wait
9801 # until memory is available.
9803 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9804 # This option is not active
9805 # ActiveIf constraint: CYGPKG_KERNEL
9806 # CYGPKG_KERNEL (unknown) == 0
9810 # No user value, uncomment the following line to provide one.
9812 # value_source default
9814 # Requires: CYGPKG_KERNEL
9815 # CYGPKG_KERNEL (unknown) == 0
9819 # Support more than one instance
9820 # Having this option disabled allows important
9821 # implementation structures to be declared as a single
9822 # static instance, allowing faster access. However this
9823 # would fail if there is more than one instance of
9824 # the dlmalloc allocator class. Therefore this option can
9825 # be enabled if multiple instances are required. Note: as
9826 # a special case, if this allocator is used as the
9827 # implementation of malloc, and it can be determined there
9828 # is more than one malloc pool, then this option will be
9831 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9833 # No user value, uncomment the following line to provide one.
9835 # value_source default
9839 # Use system memmove() and memset()
9840 # This may be used to control whether memset() and memmove()
9841 # are used within the implementation. The alternative is
9842 # to use some macro equivalents, which some people report
9843 # are faster in some circumstances.
9845 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9847 # No user value, uncomment the following line to provide one.
9849 # value_source default
9850 # Default value: 0 != CYGPKG_ISOINFRA
9851 # CYGPKG_ISOINFRA == current
9853 # Requires: CYGPKG_ISOINFRA
9854 # CYGPKG_ISOINFRA == current
9858 # Minimum alignment of allocated blocks
9859 # This option controls the minimum alignment that the
9860 # allocated memory blocks are aligned on, specified as
9861 # 2^N. Note that using large mininum alignments can lead
9862 # to excessive memory wastage.
9864 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9866 # No user value, uncomment the following line to provide one.
9868 # value_source default
9870 # Legal values: 3 to 10
9874 # Variable block allocator with separate metadata
9875 # This component contains configuration options related to the
9876 # variable block memory allocator with separate metadata.
9878 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9879 # There is no associated value.
9884 # With this option enabled, this allocator will be
9885 # made thread-safe. Additionally allocation functions
9886 # are made available that allow a thread to wait
9887 # until memory is available.
9889 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9890 # This option is not active
9891 # ActiveIf constraint: CYGPKG_KERNEL
9892 # CYGPKG_KERNEL (unknown) == 0
9896 # No user value, uncomment the following line to provide one.
9898 # value_source default
9904 # Kernel C API support for memory allocation
9905 # This option must be enabled to provide the extensions required
9906 # to support integration into the kernel C API.
9908 cdl_option CYGFUN_MEMALLOC_KAPI {
9909 # This option is not active
9910 # ActiveIf constraint: CYGPKG_KERNEL
9911 # CYGPKG_KERNEL (unknown) == 0
9915 # No user value, uncomment the following line to provide one.
9917 # value_source default
9918 # Default value: CYGFUN_KERNEL_API_C
9919 # CYGFUN_KERNEL_API_C (unknown) == 0
9923 # malloc(0) returns NULL
9924 # This option controls the behavior of malloc(0) ( or calloc with
9925 # either argument 0 ). It is permitted by the standard to return
9926 # either a NULL pointer or a unique pointer. Enabling this option
9927 # forces a NULL pointer to be returned.
9929 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9931 # No user value, uncomment the following line to provide one.
9933 # value_source default
9937 # Breakpoint site when running out of memory
9938 # Whenever the system runs out of memory, it invokes this function
9939 # before either going to sleep waiting for memory to become
9940 # available or returning failure.
9942 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9944 # No user value, uncomment the following line to provide one.
9946 # value_source default
9950 # malloc() and supporting allocators
9951 # This component enables support for dynamic memory
9952 # allocation as supplied by the functions malloc(),
9953 # free(), calloc() and realloc(). As these
9954 # functions are often used, but can have quite an
9955 # overhead, disabling them here can ensure they
9956 # cannot even be used accidentally when static
9957 # allocation is preferred. Within this component are
9958 # various allocators that can be selected for use
9959 # as the underlying implementation of the dynamic
9960 # allocation functions.
9962 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9963 # ActiveIf constraint: CYGPKG_ISOINFRA
9964 # CYGPKG_ISOINFRA == current
9968 # No user value, uncomment the following line to provide one.
9970 # value_source default
9975 # Use external heap definition
9976 # This option allows other components in the
9977 # system to override the default system
9978 # provision of heap memory pools. This should
9979 # be set to a header which provides the equivalent
9980 # definitions to <pkgconf/heaps.hxx>.
9982 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9984 # No user value, uncomment the following line to provide one.
9986 # value_source default
9987 # Default value: 0 0
9990 # Use external implementation of joining multiple heaps
9991 # The default implementation of joining multiple heaps
9992 # is fine for the case where there are multiple disjoint
9993 # memory regions of the same type. However, in a system
9994 # there might be e.g. a small amount of internal SRAM and
9995 # a large amount of external DRAM. The SRAM is faster and
9996 # the DRAM is slower. An application can implement some
9997 # heuristic to choose which pool to allocate from. This
9998 # heuristic can be highly application specific.
10000 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10002 # No user value, uncomment the following line to provide one.
10004 # value_source default
10005 # Default value: 0 0
10008 # malloc() allocator implementations
10010 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10011 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10012 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10013 # This value cannot be modified here.
10016 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10017 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10020 # The following properties are affected by this value
10021 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10022 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10025 # malloc() implementation instantiation data
10026 # Memory allocator implementations that are capable of being
10027 # used underneath malloc() must be instantiated. The code
10028 # to do this is set in this option. It is only intended to
10029 # be set by the implementation, not the user.
10031 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10033 # No user value, uncomment the following line to provide one.
10034 # user_value <cyg/memalloc/dlmalloc.hxx>
10035 # value_source default
10036 # Default value: <cyg/memalloc/dlmalloc.hxx>
10038 # The following properties are affected by this value
10039 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10040 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10041 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10042 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10045 # Simple variable block implementation
10046 # This causes malloc() to use the simple
10047 # variable block allocator.
10049 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10051 # No user value, uncomment the following line to provide one.
10053 # value_source default
10055 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10056 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10058 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10059 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10063 # Doug Lea's malloc implementation
10064 # This causes malloc() to use a version of Doug Lea's
10065 # malloc (dlmalloc) as the underlying implementation.
10067 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10069 # No user value, uncomment the following line to provide one.
10071 # value_source default
10073 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10074 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10079 # Size of the fallback dynamic memory pool in bytes
10080 # If *no* heaps are configured in your memory layout,
10081 # dynamic memory allocation by
10082 # malloc() and calloc() must be from a fixed-size,
10083 # contiguous memory pool (note here that it is the
10084 # pool that is of a fixed size, but malloc() is still
10085 # able to allocate variable sized chunks of memory
10086 # from it). This option is the size
10087 # of that pool, in bytes. Note that not all of
10088 # this is available for programs to
10089 # use - some is needed for internal information
10090 # about memory regions, and some may be lost to
10091 # ensure that memory allocation only returns
10092 # memory aligned on word (or double word)
10093 # boundaries - a very common architecture
10096 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10098 # No user value, uncomment the following line to provide one.
10100 # value_source default
10101 # Default value: 16384
10102 # Legal values: 32 to 0x7fffffff
10105 # Common memory allocator package build options
10106 # Package specific build options including control over
10107 # compiler flags used only in building this package,
10108 # and details of which tests are built.
10110 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10111 # There is no associated value.
10115 # Additional compiler flags
10116 # This option modifies the set of compiler flags for
10117 # building this package. These flags are used in addition
10118 # to the set of global flags.
10120 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10122 # No user value, uncomment the following line to provide one.
10123 # user_value "-fno-rtti -Woverloaded-virtual"
10124 # value_source default
10125 # Default value: "-fno-rtti -Woverloaded-virtual"
10128 # Suppressed compiler flags
10129 # This option modifies the set of compiler flags for
10130 # building this package. These flags are removed from
10131 # the set of global flags if present.
10133 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10135 # No user value, uncomment the following line to provide one.
10136 # user_value -Wno-pointer-sign
10137 # value_source default
10138 # Default value: -Wno-pointer-sign
10142 # This option specifies the set of tests for this package.
10144 cdl_option CYGPKG_MEMALLOC_TESTS {
10145 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10147 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10152 # Common error code support
10153 # This package contains the common list of error and
10154 # status codes. It is held centrally to allow
10155 # packages to interchange error codes and status
10156 # codes in a common way, rather than each package
10157 # having its own conventions for error/status
10158 # reporting. The error codes are modelled on the
10159 # POSIX style naming e.g. EINVAL etc. This package
10160 # also provides the standard strerror() function to
10161 # convert error codes to textual representation, as
10162 # well as an implementation of the errno idiom.
10164 cdl_package CYGPKG_ERROR {
10165 # Packages cannot be added or removed, nor can their version be changed,
10166 # simply by editing their value. Instead the appropriate configuration
10167 # should be used to perform these actions.
10169 # This value cannot be modified here.
10171 # Current value: 1 current
10172 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10173 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10179 # This package controls the behaviour of the
10180 # errno variable (or more strictly, expression)
10183 cdl_component CYGPKG_ERROR_ERRNO {
10185 # No user value, uncomment the following line to provide one.
10187 # value_source default
10189 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10190 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10196 # This option controls whether the standard error
10197 # code reporting variable errno is a per-thread
10198 # variable, rather than global.
10200 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10202 # No user value, uncomment the following line to provide one.
10204 # The inferred value should not be edited directly.
10206 # value_source inferred
10208 # Requires: CYGVAR_KERNEL_THREADS_DATA
10209 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10214 # Trace verbosity level for debugging the errno
10215 # retrieval mechanism in errno.cxx. Increase this
10216 # value to get additional trace output.
10218 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10220 # No user value, uncomment the following line to provide one.
10222 # value_source default
10224 # Legal values: 0 to 1
10228 # strerror function
10229 # This package controls the presence and behaviour of the
10230 # strerror() function from <string.h>
10232 cdl_option CYGPKG_ERROR_STRERROR {
10234 # No user value, uncomment the following line to provide one.
10236 # value_source default
10238 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10239 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10243 # Error package build options
10244 # Package specific build options including control over
10245 # compiler flags used only in building this package,
10246 # and details of which tests are built.
10248 cdl_component CYGPKG_ERROR_OPTIONS {
10249 # There is no associated value.
10253 # Additional compiler flags
10254 # This option modifies the set of compiler flags for
10255 # building the error package. These flags are used in addition
10256 # to the set of global flags.
10258 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10260 # No user value, uncomment the following line to provide one.
10262 # value_source default
10263 # Default value: ""
10266 # Suppressed compiler flags
10267 # This option modifies the set of compiler flags for
10268 # building the error package. These flags are removed from
10269 # the set of global flags if present.
10271 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10273 # No user value, uncomment the following line to provide one.
10275 # value_source default
10276 # Default value: ""