1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source inferred
95 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX27
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX27 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX27 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX27 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX27 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3112 # The processor can run at various frequencies.
3113 # These values are expressed in KHz. Note that there are
3114 # several steppings of the rate to run at different
3115 # maximum frequencies. Check the specs to make sure that your
3116 # particular processor can run at the rate you select here.
3118 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3120 # No user value, uncomment the following line to provide one.
3121 # user_value 26000000
3122 # value_source default
3123 # Default value: 26000000
3124 # Legal values: 26000000 27000000 33554432 32768000
3127 # Processor clock rate
3128 # The processor can run at various frequencies.
3129 # These values are expressed in KHz. Note that there are
3130 # several steppings of the rate to run at different
3131 # maximum frequencies. Check the specs to make sure that your
3132 # particular processor can run at the rate you select here.
3134 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3136 # No user value, uncomment the following line to provide one.
3138 # value_source default
3139 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3140 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3141 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3142 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3144 # Legal values: 266 399
3147 # System clock (hclk) rate
3148 # The processor can run at various frequencies.
3149 # These values are expressed in KHz. Note that there are
3150 # several steppings of the rate to run at different
3151 # maximum frequencies. Check the specs to make sure that your
3152 # particular processor can run at the rate you select here.
3154 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3156 # No user value, uncomment the following line to provide one.
3158 # value_source default
3159 # Default value: 133
3160 # Legal values: 133 100
3163 # Real-time clock constants
3165 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3166 # There is no associated value.
3170 # Real-time clock numerator
3172 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3173 # Calculated value: 1000000000
3175 # Current_value: 1000000000
3178 # Real-time clock denominator
3179 # This option selects the heartbeat rate for the real-time clock.
3180 # The rate is specified in ticks per second. Change this value
3181 # with caution - too high and your system will become saturated
3182 # just handling clock interrupts, too low and some operations
3183 # such as thread scheduling may become sluggish.
3185 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3187 # No user value, uncomment the following line to provide one.
3189 # value_source default
3190 # Default value: 100
3192 # The following properties are affected by this value
3193 # option CYGNUM_HAL_RTC_PERIOD
3194 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3197 # Real-time clock period
3199 cdl_option CYGNUM_HAL_RTC_PERIOD {
3200 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3201 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3203 # Current_value: 36864
3207 # UART1 available as diagnostic/debug channel
3208 # The chip has multiple serial channels which may be
3209 # used for different things on different platforms. This
3210 # interface allows a platform to indicate that the specified
3211 # serial port can be used as a diagnostic and/or debug channel.
3213 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3214 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3215 # This value cannot be modified here.
3219 # The following properties are affected by this value
3222 # UART2 available as diagnostic/debug channel
3223 # The chip has multiple serial channels which may be
3224 # used for different things on different platforms. This
3225 # interface allows a platform to indicate that the specified
3226 # serial port can be used as a diagnostic and/or debug channel.
3228 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3229 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3230 # This value cannot be modified here.
3234 # The following properties are affected by this value
3237 # UART3 available as diagnostic/debug channel
3238 # The chip has multiple serial channels which may be
3239 # used for different things on different platforms. This
3240 # interface allows a platform to indicate that the specified
3241 # serial port can be used as a diagnostic and/or debug channel.
3243 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3244 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3245 # This value cannot be modified here.
3249 # The following properties are affected by this value
3252 # UART4 available as diagnostic/debug channel
3253 # The chip has multiple serial channels which may be
3254 # used for different things on different platforms. This
3255 # interface allows a platform to indicate that the specified
3256 # serial port can be used as a diagnostic and/or debug channel.
3258 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3259 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3260 # This value cannot be modified here.
3264 # The following properties are affected by this value
3267 # UART5 available as diagnostic/debug channel
3268 # The chip has multiple serial channels which may be
3269 # used for different things on different platforms. This
3270 # interface allows a platform to indicate that the specified
3271 # serial port can be used as a diagnostic and/or debug channel.
3273 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3274 # No options implement this inferface
3275 # This value cannot be modified here.
3280 # UART6 available as diagnostic/debug channel
3281 # The chip has multiple serial channels which may be
3282 # used for different things on different platforms. This
3283 # interface allows a platform to indicate that the specified
3284 # serial port can be used as a diagnostic and/or debug channel.
3286 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3287 # No options implement this inferface
3288 # This value cannot be modified here.
3294 # This HAL platform package provides generic
3295 # support for the Ka-Ro electronics TX27 module.
3297 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3298 # Packages cannot be added or removed, nor can their version be changed,
3299 # simply by editing their value. Instead the appropriate configuration
3300 # should be used to perform these actions.
3302 # This value cannot be modified here.
3304 # Current value: 1 current
3305 # Requires: CYGINT_ISO_CTYPE
3306 # CYGINT_ISO_CTYPE == 1
3308 # Requires: CYGBLD_BUILD_REDBOOT == 1
3309 # CYGBLD_BUILD_REDBOOT == 1
3315 # The only startup type allowed is ROMRAM, since this will allow
3316 # the program to exist in ROM, but be copied to RAM during startup
3317 # which is required to boot from NAND flash.
3319 cdl_component CYG_HAL_STARTUP {
3321 # No user value, uncomment the following line to provide one.
3323 # value_source default
3324 # Default value: ROMRAM
3325 # Legal values: "ROMRAM"
3327 # The following properties are affected by this value
3328 # option CYGSEM_HAL_ROM_MONITOR
3329 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3330 # option CYGSEM_HAL_ROM_MONITOR
3331 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3332 # option CYGSEM_HAL_USE_ROM_MONITOR
3333 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3334 # option CYGSEM_HAL_USE_ROM_MONITOR
3335 # Requires: CYG_HAL_STARTUP == "RAM"
3336 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3337 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3338 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3339 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3340 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3341 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3342 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3343 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3344 # option CYGPRI_REDBOOT_ROM_MONITOR
3345 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3346 # option CYGPRI_REDBOOT_ROM_MONITOR
3347 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3350 # Diagnostic serial port baud rate
3351 # This option selects the baud rate used for the console port.
3352 # Note: this should match the value chosen for the GDB port if the
3353 # console and GDB port are the same.
3355 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3357 # No user value, uncomment the following line to provide one.
3359 # value_source default
3360 # Default value: 115200
3361 # Legal values: 9600 19200 38400 57600 115200
3364 # GDB serial port baud rate
3365 # This option selects the baud rate used for the GDB port.
3366 # Note: this should match the value chosen for the console port if the
3367 # console and GDB port are the same.
3369 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3371 # No user value, uncomment the following line to provide one.
3373 # value_source default
3374 # Default value: 115200
3375 # Legal values: 9600 19200 38400 57600 115200
3378 # Number of communication channels on the TX27
3380 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3381 # Calculated value: 3
3385 # The following properties are affected by this value
3386 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3387 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3388 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3389 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3390 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3391 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3395 # The TX27 provides access to three serial ports. This option
3396 # chooses which port will be used to connect to a host
3399 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3400 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3401 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3405 # No user value, uncomment the following line to provide one.
3407 # value_source default
3409 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3410 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3413 # Default console channel.
3415 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3416 # Calculated value: 0
3419 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3420 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3422 # The following properties are affected by this value
3423 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3424 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3427 # Console serial port
3428 # The TX27 provides access to three serial ports. This option
3429 # chooses which port will be used for console output.
3431 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3432 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3433 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3437 # No user value, uncomment the following line to provide one.
3439 # value_source default
3440 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3441 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3443 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3444 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3447 # Ka-Ro electronics TX27 module build options
3448 # Package specific build options including control over
3449 # compiler flags used only in building this package,
3450 # and details of which tests are built.
3452 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3453 # There is no associated value.
3454 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3455 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3461 # This option specifies the SDRAM size of the TX27 module.
3463 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3465 user_value 0x08000000
3467 # Default value: 0x04000000
3468 # Legal values: 0x04000000 0x08000000
3471 # Enable low level debugging with LED
3472 # This option enables low level debugging by blink codes
3473 # of the LED on STK5.
3475 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3477 # No user value, uncomment the following line to provide one.
3479 # value_source default
3480 # Default value: false
3481 # false (unknown) == 0
3485 # Additional compiler flags
3486 # This option modifies the set of compiler flags for
3487 # building the TX27 HAL. These flags are used in addition
3488 # to the set of global flags.
3490 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3492 # No user value, uncomment the following line to provide one.
3494 # value_source default
3498 # Suppressed compiler flags
3499 # This option modifies the set of compiler flags for
3500 # building the TX27 HAL. These flags are removed from
3501 # the set of global flags if present.
3503 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3505 # No user value, uncomment the following line to provide one.
3507 # value_source default
3514 cdl_component CYGHWR_MEMORY_LAYOUT {
3515 # Calculated value: "arm_tx27_romram"
3517 # Current_value: arm_tx27_romram
3521 # Memory layout linker script fragment
3523 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3524 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3526 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3529 # Memory layout header file
3531 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3532 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3534 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3543 # Common types and useful macros.
3544 # Tracing and assertion facilities.
3545 # Package startup options.
3547 cdl_package CYGPKG_INFRA {
3548 # Packages cannot be added or removed, nor can their version be changed,
3549 # simply by editing their value. Instead the appropriate configuration
3550 # should be used to perform these actions.
3552 # This value cannot be modified here.
3554 # Current value: 1 current
3556 # The following properties are affected by this value
3557 # package CYGPKG_HAL
3558 # Requires: CYGPKG_INFRA
3559 # component CYGBLD_BUILD_REDBOOT
3560 # Requires: CYGPKG_INFRA
3565 # The eCos source code contains a significant amount of
3566 # internal debugging support, in the form of assertions and
3568 # Assertions check at runtime that various conditions are as
3569 # expected; if not, execution is halted.
3570 # Tracing takes the form of text messages that are output
3571 # whenever certain events occur, or whenever functions are
3573 # The most important property of these checks and messages is
3574 # that they are not required for the program to run.
3575 # It is prudent to develop software with assertions enabled,
3576 # but disable them when making a product release, thus
3577 # removing the overhead of that checking.
3578 # It is possible to enable assertions and tracing
3580 # There are also options controlling the exact behaviour of
3581 # the assertion and tracing facilities, thus giving users
3582 # finer control over the code and data size requirements.
3584 cdl_component CYGPKG_INFRA_DEBUG {
3586 # No user value, uncomment the following line to provide one.
3588 # value_source default
3591 # The following properties are affected by this value
3592 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3593 # ActiveIf: CYGPKG_INFRA_DEBUG
3598 # If this option is defined, asserts in the code are tested.
3599 # Assert functions (CYG_ASSERT()) are defined in
3600 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3601 # If it is not defined, these result in no additional
3602 # object code and no checking of the asserted conditions.
3604 cdl_component CYGDBG_USE_ASSERTS {
3605 # This option is not active
3606 # The parent CYGPKG_INFRA_DEBUG is disabled
3609 # No user value, uncomment the following line to provide one.
3611 # value_source default
3613 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3614 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3617 # The following properties are affected by this value
3618 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3619 # Requires: CYGDBG_USE_ASSERTS
3620 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3621 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3626 # This option allows individual control of preconditions.
3627 # A precondition is one type of assert, which it is
3628 # useful to control separately from more general asserts.
3629 # The function is CYG_PRECONDITION(condition,msg).
3631 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3632 # This option is not active
3633 # The parent CYGDBG_USE_ASSERTS is not active
3636 # No user value, uncomment the following line to provide one.
3638 # value_source default
3643 # This option allows individual control of postconditions.
3644 # A postcondition is one type of assert, which it is
3645 # useful to control separately from more general asserts.
3646 # The function is CYG_POSTCONDITION(condition,msg).
3648 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3649 # This option is not active
3650 # The parent CYGDBG_USE_ASSERTS is not active
3653 # No user value, uncomment the following line to provide one.
3655 # value_source default
3660 # This option allows individual control of loop invariants.
3661 # A loop invariant is one type of assert, which it is
3662 # useful to control separately from more general asserts,
3663 # particularly since a loop invariant is typically evaluated
3664 # a great many times when used correctly.
3665 # The function is CYG_LOOP_INVARIANT(condition,msg).
3667 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3668 # This option is not active
3669 # The parent CYGDBG_USE_ASSERTS is not active
3672 # No user value, uncomment the following line to provide one.
3674 # value_source default
3679 # All assertions within eCos contain a text message
3680 # which should give some information about the condition
3682 # These text messages will end up being embedded in the
3683 # application image and hence there is a significant penalty
3684 # in terms of image size.
3685 # It is possible to suppress the use of these messages by
3686 # disabling this option.
3687 # This results in smaller code size, but there is less
3688 # human-readable information if an assertion actually gets
3691 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3692 # This option is not active
3693 # The parent CYGDBG_USE_ASSERTS is not active
3696 # No user value, uncomment the following line to provide one.
3698 # value_source default
3704 # If this option is defined, tracing operations
3705 # result in output or logging, depending on other options.
3706 # This may have adverse effects on performance, if the time
3707 # taken to output message overwhelms the available CPU
3708 # power or output bandwidth.
3709 # Trace functions (CYG_TRACE()) are defined in
3710 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3711 # If it is not defined, these result in no additional
3712 # object code and no trace information.
3714 cdl_component CYGDBG_USE_TRACING {
3715 # This option is not active
3716 # The parent CYGPKG_INFRA_DEBUG is disabled
3719 # No user value, uncomment the following line to provide one.
3721 # value_source default
3723 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3724 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3727 # The following properties are affected by this value
3728 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3729 # ActiveIf: CYGDBG_USE_TRACING
3730 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3731 # ActiveIf: CYGDBG_USE_TRACING
3732 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3733 # ActiveIf: CYGDBG_USE_TRACING
3734 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3735 # ActiveIf: CYGDBG_USE_TRACING
3736 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3737 # ActiveIf: CYGDBG_USE_TRACING
3741 # Trace function reports
3742 # This option allows individual control of
3743 # function entry/exit tracing, independent of
3744 # more general tracing output.
3745 # This may be useful to remove clutter from a
3748 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3749 # This option is not active
3750 # The parent CYGDBG_USE_TRACING is not active
3751 # The parent CYGDBG_USE_TRACING is disabled
3754 # No user value, uncomment the following line to provide one.
3756 # value_source default
3761 # All trace calls within eCos contain a text message
3762 # which should give some information about the circumstances.
3763 # These text messages will end up being embedded in the
3764 # application image and hence there is a significant penalty
3765 # in terms of image size.
3766 # It is possible to suppress the use of these messages by
3767 # disabling this option.
3768 # This results in smaller code size, but there is less
3769 # human-readable information available in the trace output,
3770 # possibly only filenames and line numbers.
3772 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3773 # This option is not active
3774 # The parent CYGDBG_USE_TRACING is not active
3775 # The parent CYGDBG_USE_TRACING is disabled
3778 # No user value, uncomment the following line to provide one.
3780 # value_source default
3785 # Trace output implementations
3787 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3788 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3789 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3790 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3791 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3792 # This option is not active
3793 # The parent CYGPKG_INFRA_DEBUG is disabled
3795 # This value cannot be modified here.
3799 # The following properties are affected by this value
3800 # component CYGDBG_USE_ASSERTS
3801 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3802 # component CYGDBG_USE_TRACING
3803 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3807 # A null output module which is useful when
3808 # debugging interactively; the output routines
3809 # can be breakpointed rather than have them actually
3810 # 'print' something.
3812 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3813 # This option is not active
3814 # The parent CYGPKG_INFRA_DEBUG is disabled
3817 # No user value, uncomment the following line to provide one.
3819 # value_source default
3824 # An output module which produces simple output
3825 # from tracing and assertion events.
3827 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3828 # This option is not active
3829 # The parent CYGPKG_INFRA_DEBUG is disabled
3832 # No user value, uncomment the following line to provide one.
3834 # value_source default
3839 # An output module which produces fancy output
3840 # from tracing and assertion events.
3842 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3843 # This option is not active
3844 # The parent CYGPKG_INFRA_DEBUG is disabled
3847 # No user value, uncomment the following line to provide one.
3849 # value_source default
3854 # An output module which buffers output
3855 # from tracing and assertion events. The stored
3856 # messages are output when an assert fires, or
3857 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3859 # Of course, there will only be stored messages
3860 # if tracing per se (CYGDBG_USE_TRACING)
3863 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3864 # This option is not active
3865 # The parent CYGPKG_INFRA_DEBUG is disabled
3868 # No user value, uncomment the following line to provide one.
3870 # value_source default
3876 # The size of the trace buffer. This counts the number
3877 # of trace records stored. When the buffer fills it
3878 # either wraps, stops recording, or generates output.
3880 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3881 # This option is not active
3882 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3883 # ActiveIf constraint: CYGDBG_USE_TRACING
3884 # CYGDBG_USE_TRACING == 0
3888 # No user value, uncomment the following line to provide one.
3890 # value_source default
3892 # Legal values: 5 to 65535
3895 # Wrap trace buffer when full
3896 # When the trace buffer has filled with records it
3897 # starts again at the beginning. Hence only the last
3898 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3901 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3902 # This option is not active
3903 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3904 # ActiveIf constraint: CYGDBG_USE_TRACING
3905 # CYGDBG_USE_TRACING == 0
3909 # No user value, uncomment the following line to provide one.
3911 # value_source default
3915 # Halt trace buffer when full
3916 # When the trace buffer has filled with records it
3917 # stops recording. Hence only the first
3918 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3921 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3922 # This option is not active
3923 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3924 # ActiveIf constraint: CYGDBG_USE_TRACING
3925 # CYGDBG_USE_TRACING == 0
3929 # No user value, uncomment the following line to provide one.
3931 # value_source default
3935 # Print trace buffer when full
3936 # When the trace buffer has filled with records it
3937 # prints the contents of the buffer. The buffer is then
3938 # emptied and the system continues.
3940 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3941 # This option is not active
3942 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3943 # ActiveIf constraint: CYGDBG_USE_TRACING
3944 # CYGDBG_USE_TRACING == 0
3948 # No user value, uncomment the following line to provide one.
3950 # value_source default
3954 # Print trace buffer on assert fail
3955 # When an assertion fails the trace buffer will be
3956 # printed to the default diagnostic device.
3958 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3959 # This option is not active
3960 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3961 # ActiveIf constraint: CYGDBG_USE_TRACING
3962 # CYGDBG_USE_TRACING == 0
3966 # No user value, uncomment the following line to provide one.
3968 # value_source default
3973 # Use function names
3974 # All trace and assert calls within eCos contain a
3975 # reference to the builtin macro '__PRETTY_FUNCTION__',
3976 # which evaluates to a string containing
3977 # the name of the current function.
3978 # This is useful when reading a trace log.
3979 # It is possible to suppress the use of the function name
3980 # by disabling this option.
3981 # This results in smaller code size, but there is less
3982 # human-readable information available in the trace output,
3983 # possibly only filenames and line numbers.
3985 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3986 # This option is not active
3987 # The parent CYGPKG_INFRA_DEBUG is disabled
3990 # No user value, uncomment the following line to provide one.
3992 # value_source default
3998 # Some packages require a startup routine to be called.
3999 # This can be carried out by application code, by supplying
4000 # a routine called cyg_package_start() which calls the
4001 # appropriate package startup routine(s).
4002 # Alternatively, this routine can be constructed automatically
4003 # and configured to call the startup routines of your choice.
4005 cdl_component CYGPKG_INFRA_STARTUP {
4006 # There is no associated value.
4010 # Start uITRON subsystem
4011 # Generate a call to initialize the
4012 # uITRON compatibility subsystem
4013 # within the system version of cyg_package_start().
4014 # This enables compatibility with uITRON.
4015 # You must configure uITRON with the correct tasks before
4016 # starting the uItron subsystem.
4017 # If this is disabled, and you want to use uITRON,
4018 # you must call cyg_uitron_start() from your own
4019 # cyg_package_start() or cyg_userstart().
4021 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4022 # This option is not active
4023 # ActiveIf constraint: CYGPKG_UITRON
4024 # CYGPKG_UITRON (unknown) == 0
4028 # No user value, uncomment the following line to provide one.
4030 # value_source default
4032 # Requires: CYGPKG_UITRON
4033 # CYGPKG_UITRON (unknown) == 0
4038 # Smaller slower memcpy()
4039 # Enabling this option causes the implementation of
4040 # the standard memcpy() routine to reduce code
4041 # size at the expense of execution speed. This
4042 # option is automatically enabled with the use of
4043 # the -Os option to the compiler. Also note that
4044 # the compiler will try to use its own builtin
4045 # version of memcpy() if possible, ignoring the
4046 # implementation in this package, unless given
4047 # the -fno-builtin compiler option.
4049 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4051 # No user value, uncomment the following line to provide one.
4053 # value_source default
4057 # Smaller slower memset()
4058 # Enabling this option causes the implementation of
4059 # the standard memset() routine to reduce code
4060 # size at the expense of execution speed. This
4061 # option is automatically enabled with the use of
4062 # the -Os option to the compiler. Also note that
4063 # the compiler will try to use its own builtin
4064 # version of memset() if possible, ignoring the
4065 # implementation in this package, unless given
4066 # the -fno-builtin compiler option.
4068 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4070 # No user value, uncomment the following line to provide one.
4072 # value_source default
4076 # Provide empty C++ delete functions
4077 # To deal with virtual destructors, where the correct delete()
4078 # function must be called for the derived class in question, the
4079 # underlying delete is called when needed, from destructors. This
4080 # is regardless of whether the destructor is called by delete itself.
4081 # So there is a reference to delete() from all destructors. The
4082 # default builtin delete() attempts to call free() if there is
4083 # one defined. So, if you have destructors, and you have free(),
4084 # as in malloc() and free(), any destructor counts as a reference
4085 # to free(). So the dynamic memory allocation code is linked
4086 # in regardless of whether it gets explicitly called. This
4087 # increases code and data size needlessly.
4088 # To defeat this undesirable behaviour, we define empty versions
4089 # of delete and delete. But doing this prevents proper use
4090 # of dynamic memory in C++ programs via C++'s new and delete
4092 # Therefore, this option is provided
4093 # for explicitly disabling the provision of these empty functions,
4094 # so that new and delete can be used, if that is what is required.
4096 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4098 # No user value, uncomment the following line to provide one.
4100 # value_source default
4104 # Threshold for valid number of delete calls
4105 # Some users don't know about the empty delete function and then
4106 # wonder why their C++ classes are leaking memory. If
4107 # INFRA_DEBUG is enabled we keep a counter for the number of
4108 # times delete is called. If it goes above this threshold we throw
4109 # an assertion failure. This should point heavy users of
4110 # delete in the right direction without upsetting those who want
4111 # an empty delete function.
4113 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4114 # This option is not active
4115 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4116 # CYGPKG_INFRA_DEBUG == 0
4120 # No user value, uncomment the following line to provide one.
4122 # value_source default
4123 # Default value: 100
4126 # Provide dummy abort() function
4127 # This option controls the inclusion of a dummy abort() function.
4128 # Parts of the C and C++ compiler runtime systems contain references
4129 # to abort(), particulary in the C++ exception handling code. It is
4130 # not possible to eliminate these references, so this dummy function
4131 # in included to satisfy them. It is not expected that this function
4132 # will ever be called, so its current behaviour is to simply loop.
4134 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4136 # No user value, uncomment the following line to provide one.
4138 # value_source default
4139 # Default value: CYGINT_ISO_EXIT == 0
4140 # CYGINT_ISO_EXIT == 0
4142 # Requires: !CYGINT_ISO_EXIT
4143 # CYGINT_ISO_EXIT == 0
4147 # Reset platform at end of test case execution
4148 # If this option is set then test case programs will reset the platform
4149 # when they terminate, as opposed to the default which is to just hang
4152 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4154 # No user value, uncomment the following line to provide one.
4156 # value_source default
4160 # Provide dummy strlen() function
4161 # This option controls the inclusion of a dummy strlen() function.
4162 # Parts of the C and C++ compiler runtime systems contain references
4163 # to strlen(), particulary in the C++ exception handling code. It is
4164 # not possible to eliminate these references, so this dummy function
4165 # in included to satisfy them. While it is not expected that this function
4166 # will ever be called, it is functional but uses the simplest, smallest
4167 # algorithm. There is a faster version of strlen() in the C library.
4169 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4171 # No user value, uncomment the following line to provide one.
4173 # value_source default
4174 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4175 # CYGINT_ISO_STRING_STRFUNCS == 1
4177 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4178 # CYGINT_ISO_STRING_STRFUNCS == 1
4182 # Make all compiler warnings show as errors
4183 # Enabling this option will cause all compiler warnings to show
4184 # as errors and bring the library build to a halt. This is used
4185 # to ensure that the code base is warning free, and thus ensure
4186 # that newly introduced warnings stand out and get fixed before
4187 # they show up as weird run-time behavior.
4189 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4194 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4195 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4198 # The following properties are affected by this value
4199 # option CYGBLD_GLOBAL_CFLAGS
4200 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4203 # Make compiler and assembler communicate by pipe
4204 # Enabling this option will cause the compiler to feed the
4205 # assembly output the the assembler via a pipe instead of
4206 # via a temporary file. This normally reduces the build
4209 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4214 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4215 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4219 # Infra build options
4220 # Package specific build options including control over
4221 # compiler flags used only in building this package.
4223 cdl_component CYGPKG_INFRA_OPTIONS {
4224 # There is no associated value.
4228 # Additional compiler flags
4229 # This option modifies the set of compiler flags for
4230 # building the eCos infra package. These flags are used
4231 # in addition to the set of global flags.
4233 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4235 # No user value, uncomment the following line to provide one.
4236 # user_value "-fno-rtti -Woverloaded-virtual"
4237 # value_source default
4238 # Default value: "-fno-rtti -Woverloaded-virtual"
4241 # Suppressed compiler flags
4242 # This option modifies the set of compiler flags for
4243 # building the eCos infra package. These flags are removed from
4244 # the set of global flags if present.
4246 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4248 # No user value, uncomment the following line to provide one.
4249 # user_value -Wno-pointer-sign
4250 # value_source default
4251 # Default value: -Wno-pointer-sign
4254 # Suppressed linker flags
4255 # This option modifies the set of linker flags for
4256 # building the eCos infra package tests. These flags are removed from
4257 # the set of global flags if present.
4259 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4261 # No user value, uncomment the following line to provide one.
4262 # user_value -Wl,--gc-sections
4263 # value_source default
4264 # Default value: -Wl,--gc-sections
4267 # Additional linker flags
4268 # This option modifies the set of linker flags for
4269 # building the eCos infra package tests. These flags are added to
4270 # the set of global flags if present.
4272 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4274 # No user value, uncomment the following line to provide one.
4275 # user_value -Wl,--fatal-warnings
4276 # value_source default
4277 # Default value: -Wl,--fatal-warnings
4280 # Infra package tests
4282 cdl_component CYGPKG_INFRA_TESTS {
4283 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4285 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4289 # Number of times a test runs
4290 # This option controls the number of times tests will execute their
4291 # basic function. Not all tests will honor this setting, but those
4292 # that do will execute the test N times before terminating. A value
4293 # less than 0 indicates to run forever.
4295 cdl_option CYGNUM_TESTS_RUN_COUNT {
4297 # No user value, uncomment the following line to provide one.
4299 # value_source default
4306 # Redboot ROM monitor
4307 # doc: ref/redboot.html
4308 # This package supports the Redboot [stand-alone debug monitor]
4309 # using eCos as the underlying board support mechanism.
4311 cdl_package CYGPKG_REDBOOT {
4312 # Packages cannot be added or removed, nor can their version be changed,
4313 # simply by editing their value. Instead the appropriate configuration
4314 # should be used to perform these actions.
4316 # This value cannot be modified here.
4318 # Current value: 1 current
4319 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4320 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4323 # The following properties are affected by this value
4324 # component CYGPKG_REDBOOT_ARM_OPTIONS
4325 # ActiveIf: CYGPKG_REDBOOT
4326 # component CYGPKG_REDBOOT_HAL_OPTIONS
4327 # ActiveIf: CYGPKG_REDBOOT
4328 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4329 # ActiveIf: CYGPKG_REDBOOT
4330 # option CYGSEM_IO_ETH_DRIVERS_WARN
4331 # ActiveIf: CYGPKG_REDBOOT
4335 # Include support for ELF file format
4337 cdl_component CYGSEM_REDBOOT_ELF {
4339 # No user value, uncomment the following line to provide one.
4341 # value_source default
4346 # Use the virtual address in the ELF headers
4347 # The ELF headers contain both a virtual and a physical address
4348 # for where code/data should be loaded. By default the physical
4349 # address is used but sometimes it is necassary to use the
4350 # virtual address because of bugy toolchains
4352 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4354 # No user value, uncomment the following line to provide one.
4356 # value_source default
4361 # Methods of loading images using redboot
4363 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4364 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4365 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4366 # This value cannot be modified here.
4370 # The following properties are affected by this value
4371 # component CYGBLD_BUILD_REDBOOT
4372 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4375 # Build Redboot ROM ELF image
4376 # This option enables the building of the Redboot ELF image.
4377 # The image may require further relocation or symbol
4378 # stripping before being converted to a binary image.
4379 # This is handled by a rule in the target CDL.
4381 cdl_component CYGBLD_BUILD_REDBOOT {
4383 # No user value, uncomment the following line to provide one.
4385 # The inferred value should not be edited directly.
4387 # value_source inferred
4389 # Requires: CYGPKG_INFRA
4390 # CYGPKG_INFRA == current
4392 # Requires: CYGPKG_ISOINFRA
4393 # CYGPKG_ISOINFRA == current
4395 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4396 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4398 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4399 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4401 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4402 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4404 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4405 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4407 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4408 # CYGINT_ISO_STRING_MEMFUNCS == 1
4410 # Requires: CYGINT_ISO_STRING_STRFUNCS
4411 # CYGINT_ISO_STRING_STRFUNCS == 1
4413 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4414 # CYGINT_REDBOOT_LOAD_METHOD == 2
4417 # The following properties are affected by this value
4418 # package CYGPKG_HAL_ARM_TX27KARO
4419 # Requires: CYGBLD_BUILD_REDBOOT == 1
4420 # option CYGBLD_BUILD_REDBOOT_BIN
4421 # ActiveIf: CYGBLD_BUILD_REDBOOT
4425 # Include GDB support in RedBoot
4426 # RedBoot normally includes support for the GDB debugging
4427 # protocols. This option allows this to be disabled which
4428 # may yield a substantial savings in terms of code and memory
4431 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4432 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4433 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4440 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4441 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4443 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4444 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4448 # Threads debugging support
4449 # Enabling this option will include special code in the
4450 # GDB stubs to support debugging of threaded programs. In
4451 # the case of eCos programs, this support allows GDB to
4452 # have complete access to the eCos threads in the
4455 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4456 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4457 # CYG_HAL_STARTUP == ROMRAM
4461 # No user value, uncomment the following line to provide one.
4463 # value_source default
4465 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4466 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4470 # Customized version string
4471 # Use this option to define a customized version "string" for
4472 # RedBoot. Note: this value is only cosmetic, displayed by the
4473 # "version" command, but is useful for providing site specific
4474 # information about the RedBoot configuration.
4476 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4478 # No user value, uncomment the following line to provide one.
4480 # The inferred value should not be edited directly.
4481 inferred_value 1 "Ka-Ro 2009-06-10"
4482 # value_source inferred
4483 # Default value: 0 0
4486 # Enable command line editing
4487 # If this option is non-zero, RedBoot will remember the
4488 # last N command lines. These lines may be reused.
4489 # Enabling this history will also enable rudimentary
4490 # editting of the lines themselves.
4492 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4494 # No user value, uncomment the following line to provide one.
4496 # value_source default
4499 # The following properties are affected by this value
4500 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4501 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4502 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4503 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4506 # Enable command line editing using ANSI arrows, etc
4507 # If this option is enabled, RedBoot will accept standard ANSI key
4508 # sequences for cursor movement (along with the emacs style keys).
4510 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4511 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4512 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4516 # No user value, uncomment the following line to provide one.
4518 # value_source default
4522 # Enable history command and expansion
4523 # Enabling this option will allow RedBoot to provide a
4524 # history command to list previous commands. Also enables
4525 # history expansion via '!' character similar to bash
4528 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4530 # No user value, uncomment the following line to provide one.
4532 # value_source default
4534 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4535 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4539 # Number of unique RAM segments on platform
4540 # Change this option to be the number of memory segments which are
4541 # supported by the platform. If the value is greater than 1, then
4542 # a platform specific function must provide information about the
4543 # additional segments.
4545 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4547 # No user value, uncomment the following line to provide one.
4549 # value_source default
4553 # Include support gzip/zlib decompression
4555 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4556 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4557 # CYGPKG_COMPRESS_ZLIB == current
4561 # No user value, uncomment the following line to provide one.
4563 # value_source default
4566 # The following properties are affected by this value
4567 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4568 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4572 # Size of zlib decompression buffer
4573 # This is the size of the buffer filled with incoming data
4574 # during load before calls are made to the decompressor
4575 # function. For ethernet downloads this can be made bigger
4576 # (at the cost of memory), but for serial downloads on slow
4577 # processors it may be necessary to reduce the size to
4578 # avoid serial overruns. zlib appears to bail out if less
4579 # than five bytes are available initially so this is the
4582 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4584 # No user value, uncomment the following line to provide one.
4586 # value_source default
4588 # Legal values: 5 to 256
4591 # Support compression of Flash images
4592 # This CDL indicates whether flash images can
4593 # be decompressed from gzip/zlib format into RAM.
4595 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4596 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4597 # CYGPKG_REDBOOT_FLASH == 1
4599 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4600 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4601 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4604 # Calculated value: 1
4609 # Include GZIP uncompress command
4610 # Enable this option to include a 'gunzip' command
4611 # to uncompress GZIP compressed data.
4613 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4615 # No user value, uncomment the following line to provide one.
4617 # value_source default
4621 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4622 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4624 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4626 # No user value, uncomment the following line to provide one.
4628 # The inferred value should not be edited directly.
4630 # value_source inferred
4633 # The following properties are affected by this value
4634 # option CYGPRI_REDBOOT_ZLIB_FLASH
4635 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4639 # Include support for xyzModem downloads
4640 # doc: ref/download-command.html
4642 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4644 # No user value, uncomment the following line to provide one.
4646 # value_source default
4649 # The following properties are affected by this value
4650 # option CYGPKG_REDBOOT_CFLAGS_ADD
4651 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4654 # Additional compiler flags
4655 # This option modifies the set of compiler flags for
4656 # building the eCos infra package. These flags are used
4657 # in addition to the set of global flags.
4659 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4660 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4661 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4665 # No user value, uncomment the following line to provide one.
4666 # user_value -Wno-inline
4667 # value_source default
4668 # Default value: -Wno-inline
4671 # Allow the load-command write into Flash.
4672 # Write images direct to Flash via the load command.
4673 # We assume anything which is invalid RAM is flash, hence
4674 # the requires statement
4676 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4677 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4678 # CYGPKG_REDBOOT_FLASH == 1
4682 # No user value, uncomment the following line to provide one.
4684 # value_source default
4686 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4687 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4691 # Include MS Windows CE support
4692 # doc: ref/wince.html
4693 # This option enables MS Windows CE EShell support
4694 # and Windows CE .BIN images support
4696 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4703 # Include support for MXC USB downloads
4705 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4707 # No user value, uncomment the following line to provide one.
4709 # value_source default
4713 # Include support for i.MX USB OTG downloads
4715 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4717 # No user value, uncomment the following line to provide one.
4719 # value_source default
4723 # Include POSIX checksum command
4724 # doc: ref/cksum-command.html
4726 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4728 # No user value, uncomment the following line to provide one.
4730 # value_source default
4734 # Include memory fill command
4735 # doc: ref/mfill-command.html
4737 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4739 # No user value, uncomment the following line to provide one.
4741 # value_source default
4745 # Include memory compare command
4746 # doc: ref/mcmp-command.html
4748 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4750 # No user value, uncomment the following line to provide one.
4752 # value_source default
4756 # Include memory copy command
4757 # doc: ref/mcopy-command.html
4759 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4761 # No user value, uncomment the following line to provide one.
4763 # value_source default
4767 # Include memory dump command
4768 # doc: ref/dump-command.html
4770 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4772 # No user value, uncomment the following line to provide one.
4774 # value_source default
4778 # Include cache command
4779 # doc: ref/cache-command.html
4781 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4783 # No user value, uncomment the following line to provide one.
4785 # value_source default
4789 # Include exec command
4790 # doc: ref/exec-command.html
4792 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4794 # No user value, uncomment the following line to provide one.
4796 # value_source default
4799 # The following properties are affected by this value
4800 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4801 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4804 # Include I/O Memory commands 'iopeek' and 'iopoke'
4806 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4808 # No user value, uncomment the following line to provide one.
4810 # value_source default
4814 # Granularity of timer/ticks
4815 # This option controls the granularity of the timers.
4816 # Faster CPUs can afford higher granularity (lower values)
4817 # which should give higher network performance since the stack
4820 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4822 # No user value, uncomment the following line to provide one.
4824 # value_source default
4825 # Default value: 250
4826 # Legal values: 10 25 50 100 250 500 1000
4829 # Redboot Networking
4830 # This option includes networking support in RedBoot.
4832 cdl_component CYGPKG_REDBOOT_NETWORKING {
4833 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4834 # CYGPKG_IO_ETH_DRIVERS == current
4838 # No user value, uncomment the following line to provide one.
4840 # value_source default
4843 # The following properties are affected by this value
4844 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4845 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4849 # Print net debug information
4850 # This option is overriden by the configuration stored
4853 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4855 # No user value, uncomment the following line to provide one.
4857 # value_source default
4861 # Support TFTP for download
4862 # This option enables the use of the TFTP protocol for
4865 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4867 # No user value, uncomment the following line to provide one.
4869 # value_source default
4873 # Support HTTP for download
4874 # This option enables the use of the HTTP protocol for
4877 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4884 # Default IP address
4885 # This IP address is the default used by RedBoot if
4886 # a BOOTP/DHCP server does not respond. The numbers
4887 # should be separated by *commas*, and not dots. If
4888 # an IP address is configured into the Flash
4889 # configuration, that will be used in preference.
4891 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4893 # No user value, uncomment the following line to provide one.
4895 # value_source default
4896 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4897 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4902 # Do not try to use BOOTP
4903 # By default Redboot tries to use BOOTP to get an IP
4904 # address. If there's no BOOTP server on your network
4905 # use this option to avoid to wait until the
4906 # timeout. This option is overriden by the
4907 # configuration stored in flash.
4909 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4910 # This option is not active
4911 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4914 # No user value, uncomment the following line to provide one.
4916 # value_source default
4920 # Default bootp server
4921 # This IP address is the default server
4922 # address used by RedBoot if a BOOTP/DHCP
4923 # server does not respond. The numbers should
4924 # be separated by *commas*, and not dots. If
4925 # an IP address is configured into the Flash
4926 # configuration, that will be used in
4929 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4930 # This option is not active
4931 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4934 # No user value, uncomment the following line to provide one.
4936 # value_source default
4937 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4938 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4943 # Use DHCP to get IP information
4944 # Use DHCP protocol to obtain pertinent IP addresses, such
4945 # as the client, server, gateway, etc.
4947 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4949 # No user value, uncomment the following line to provide one.
4951 # value_source default
4954 # The following properties are affected by this value
4955 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4956 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4959 # Use a gateway for non-local IP traffic
4960 # Enabling this option will allow the RedBoot networking
4961 # stack to use a [single] gateway to reach a non-local
4962 # IP address. If disabled, RedBoot will only be able to
4963 # reach nodes on the same subnet.
4965 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4967 # No user value, uncomment the following line to provide one.
4969 # value_source default
4971 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4972 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4977 # Default gateway IP address
4978 # This IP address is the default used by RedBoot
4979 # if a BOOTP/DHCP server does not respond. The
4980 # numbers should be separated by *commas*, and
4981 # not dots. If an IP address is configured into
4982 # the Flash configuration, that will be used in
4985 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4987 # No user value, uncomment the following line to provide one.
4989 # value_source default
4990 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4991 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4995 # Default IP address mask
4996 # This IP address mask is the default used by
4997 # RedBoot if a BOOTP/DHCP server does not
4998 # respond. The numbers should be separated by
4999 # *commas*, and not dots. If an IP address is
5000 # configured into the Flash configuration, that
5001 # will be used in preference.
5003 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5005 # No user value, uncomment the following line to provide one.
5007 # value_source default
5008 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5009 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5014 # TCP port to listen for incoming connections
5015 # RedBoot will 'listen' on this port for incoming TCP
5016 # connections. This allows outside connections to be made
5017 # to the platform, either for GDB or RedBoot commands.
5019 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5021 # No user value, uncomment the following line to provide one.
5023 # value_source default
5024 # Default value: 9000
5027 # Number of [network] packet buffers
5028 # RedBoot may need to buffer network data to support
5029 # various connections. This option allows control
5030 # over the number of such buffered packets, and in
5031 # turn, controls the amount of memory used by RedBoot
5032 # (which is not available to user applications).
5033 # Each packet buffer takes up about 1514 bytes.
5034 # Note: there is little need to make this larger than
5037 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5039 # No user value, uncomment the following line to provide one.
5041 # value_source default
5043 # Legal values: 3 to 8
5047 # When this option is enabled, RedBoot will be built with
5048 # support for DNS, allowing use of hostnames on the command
5051 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5052 # This option is not active
5053 # ActiveIf constraint: CYGPKG_NS_DNS
5054 # CYGPKG_NS_DNS (unknown) == 0
5058 # No user value, uncomment the following line to provide one.
5060 # value_source default
5062 # Requires: !CYGPKG_NS_DNS_BUILD
5063 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5069 # This option sets the IP of the default DNS. The IP can be
5070 # changed at runtime as well.
5072 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5073 # This option is not active
5074 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5075 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5076 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5080 # No user value, uncomment the following line to provide one.
5081 # user_value 0.0.0.0
5082 # value_source default
5083 # Default value: 0.0.0.0
5086 # Timeout in DNS lookup
5087 # This option sets the timeout used when looking up an
5088 # address via the DNS. Default is 10 seconds.
5090 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5091 # This option is not active
5092 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5095 # No user value, uncomment the following line to provide one.
5097 # value_source default
5101 # Support the use of a domain name
5102 # This option controls if Redboot supports domain
5103 # names when performing DNS lookups
5105 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5106 # This option is not active
5107 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5110 # No user value, uncomment the following line to provide one.
5112 # value_source default
5117 # Default DNS domain
5118 # This option sets the default DNS domain name.
5119 # This value will be overwritten by the value in
5120 # flash or a domain returned by DHCP
5122 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5123 # This option is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5125 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5128 # No user value, uncomment the following line to provide one.
5130 # value_source default
5131 # Default value: 0 0
5134 # Get DNS domain from Flash
5135 # This option enables getting the domain name
5136 # from the flash configuration. This can later be
5137 # overwritten by a value learnt from DHCP
5139 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5140 # This option is not active
5141 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5142 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5143 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5144 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5148 # No user value, uncomment the following line to provide one.
5150 # value_source default
5154 # Use DNS domain from DHCP
5155 # This option enables the use of the domain name
5158 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5159 # This option is not active
5160 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5161 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5164 # No user value, uncomment the following line to provide one.
5166 # value_source default
5170 # BOOTP/DHCP DNS domain buffer size
5171 # This options sets the size of the static
5172 # buffer used by BOOTP/DHCP to store the DNS
5173 # domain name. The domain name will not be
5174 # set if the buffer is too small to hold it.
5176 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5177 # This option is not active
5178 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5179 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5182 # No user value, uncomment the following line to provide one.
5184 # value_source default
5190 # Default network device driver
5191 # This is the name of the default network device to use.
5193 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5194 # This option is not active
5195 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5196 # CYGHWR_NET_DRIVERS == 1
5200 # No user value, uncomment the following line to provide one.
5202 # value_source default
5203 # Default value: "\"\""
5206 # Initialize only one net device
5207 # This option tells RedBoot to stop initializing network
5208 # devices when it finds the first device which is
5209 # successfully initialized. The default behavior causes
5210 # all network devices to be initialized.
5212 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5213 # This option is not active
5214 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5215 # CYGHWR_NET_DRIVERS == 1
5219 # No user value, uncomment the following line to provide one.
5221 # value_source default
5226 # Let RedBoot use any I/O channel for its console.
5227 # If this option is enabled then RedBoot will attempt to use all
5228 # defined serial I/O channels for its console device. Once input
5229 # arrives at one of these channels then the console will use only
5232 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5234 # No user value, uncomment the following line to provide one.
5236 # The inferred value should not be edited directly.
5238 # value_source inferred
5242 # Let RedBoot adjust the baud rate of the serial console.
5243 # If this option is enabled then RedBoot will support commands
5244 # to set and query the baud rate on the selected console.
5246 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5247 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5248 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5252 # No user value, uncomment the following line to provide one.
5254 # value_source default
5258 # Run a platform specific startup function.
5259 # If this option is enabled then RedBoot will execute a platform
5260 # specific startup function before entering into its command line
5261 # processing. This allows the platform to perform any special
5262 # setups before RedBoot actually starts running. Note: the entire
5263 # RedBoot environment will already be initialized at this point.
5265 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5267 # No user value, uncomment the following line to provide one.
5269 # value_source default
5273 # Run a platform specific ESA validation function.
5274 # If this option is enabled then RedBoot will execute a platform
5275 # specific function to validate an ethernet ESA. This would be
5276 # useful if the address must conform to standards set by the
5277 # hardware manufacturer, etc.
5279 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5281 # No user value, uncomment the following line to provide one.
5283 # The inferred value should not be edited directly.
5285 # value_source inferred
5288 # The following properties are affected by this value
5289 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5290 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5291 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5292 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5295 # Maximum command line length
5296 # This option allows control over how long the CLI command line
5297 # should be. This space will be allocated statically
5298 # rather than from RedBoot's stack.
5300 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5302 # No user value, uncomment the following line to provide one.
5304 # The inferred value should not be edited directly.
5306 # value_source inferred
5307 # Default value: 256
5310 # Command processing idle timeout (ms)
5311 # This option controls the timeout period before the
5312 # command processing is considered 'idle'. Making this
5313 # number smaller will cause idle processing to take place
5314 # more often, etc. The default value of 10ms is a reasonable
5315 # tradeoff between responsiveness and overhead.
5317 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5319 # No user value, uncomment the following line to provide one.
5321 # value_source default
5325 # Validate RAM addresses during load
5326 # This option controls whether or not RedBoot will make
5327 # sure that memory being used by the "load" command is
5328 # in fact in user RAM. Leaving the option enabled makes
5329 # for a safer environment, but this check may not be valid
5330 # on all platforms, thus the ability to disable it.
5331 # ** Disable this only with great care **
5333 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5335 # No user value, uncomment the following line to provide one.
5337 # value_source default
5340 # The following properties are affected by this value
5341 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5342 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5345 # Allow RedBoot to support FLASH programming
5346 # If this option is enabled then RedBoot will provide commands
5347 # to manage images in FLASH memory. These images can be loaded
5348 # into memory for execution or executed in place.
5350 cdl_component CYGPKG_REDBOOT_FLASH {
5351 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5352 # CYGHWR_IO_FLASH_DEVICE == 1
5356 # No user value, uncomment the following line to provide one.
5358 # value_source default
5361 # The following properties are affected by this value
5362 # option CYGPRI_REDBOOT_ZLIB_FLASH
5363 # ActiveIf: CYGPKG_REDBOOT_FLASH
5364 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5365 # ActiveIf: CYGPKG_REDBOOT_FLASH
5369 # Byte order used to store info in flash.
5370 # This option controls the byte ordering used to store
5371 # the FIS directory info and flash config info.
5373 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5375 # No user value, uncomment the following line to provide one.
5376 # user_value NATURAL
5377 # value_source default
5378 # Default value: NATURAL
5379 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5382 # RedBoot Flash Image System support
5383 # doc: ref/flash-image-system.html
5384 # This option enables the Flash Image System commands
5385 # and support within RedBoot. If disabled, simple Flash
5386 # access commands such as "fis write" will still exist.
5387 # This option would be disabled for targets that need simple
5388 # FLASH manipulation, but do not have the need or space for
5389 # complete image management.
5391 cdl_option CYGOPT_REDBOOT_FIS {
5393 # No user value, uncomment the following line to provide one.
5395 # value_source default
5398 # The following properties are affected by this value
5399 # component CYGPKG_REDBOOT_FIS_CONTENTS
5400 # ActiveIf: CYGOPT_REDBOOT_FIS
5401 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5402 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5403 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5404 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5407 # Max number of chunks of free space to manage
5408 # If this option is defined then "fis free" will
5409 # rely on the FIS directory to determine what space is
5410 # free within the FLASH. This option controls the
5411 # maximum number of free segment which can be handled
5412 # (typically this number is small). If this option is
5413 # not enabled, the the archaic behaviour of actually
5414 # scanning the FLASH for erased sectors (unreliable)
5415 # will be used to determine what's free and what's
5418 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5420 # No user value, uncomment the following line to provide one.
5422 # value_source default
5423 # Default value: 1 32
5426 # Flash Image System default directory contents
5428 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5429 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5430 # CYGOPT_REDBOOT_FIS == 1
5433 # Calculated value: 1
5439 # Flash block containing the Directory
5440 # Which block of flash should hold the directory
5441 # information. Positive numbers are absolute block
5442 # numbers. Negative block numbers count backwards
5443 # from the last block. eg 2 means block 2, -2
5444 # means the last but one block.
5446 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5448 # No user value, uncomment the following line to provide one.
5450 # value_source default
5453 # The following properties are affected by this value
5454 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5455 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5456 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5459 # Redundant Flash Image System Directory Support
5460 # This option enables the use of a redundant FIS
5461 # directory within RedBoot. If enabled a flash block
5462 # will be reserved for a second copy of the fis
5463 # directory. Doing this allow for power failure safe
5464 # updates of the directory by the application.
5466 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5468 # No user value, uncomment the following line to provide one.
5470 # value_source default
5472 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5473 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5478 # Flash block containing the backup Directory
5479 # Which block of flash should hold the redundant
5480 # directory information. Positive numbers are
5481 # absolute block numbers. Negative block numbers
5482 # count backwards from the last block. eg 2 means
5483 # block 2, -2 means the last but one block.
5485 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5486 # This option is not active
5487 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5490 # No user value, uncomment the following line to provide one.
5492 # value_source default
5494 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5495 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5496 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5497 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5500 # The following properties are affected by this value
5501 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5502 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5503 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5507 # Pseudo-file to describe reserved area
5508 # If an area of FLASH is reserved, it is informative to
5509 # have a fis entry describing it. This option controls
5510 # creation of such an entry by default in the fis init
5513 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5514 # This option is not active
5515 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5516 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5520 # No user value, uncomment the following line to provide one.
5522 # value_source default
5526 # File to describe RedBoot boot image
5527 # Normally a ROM-startup RedBoot image is first in the
5528 # FLASH, and the system boots using that image. This
5529 # option controls creation of an entry describing it in
5530 # the fis init command. It might be disabled if a
5531 # platform has an immutable boot image of its own, where
5532 # we use a POST-startup RedBoot instead, which performs
5533 # less board initialization.
5535 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5537 # No user value, uncomment the following line to provide one.
5539 # value_source default
5542 # The following properties are affected by this value
5543 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5544 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5545 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5546 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5549 # File to describe RedBoot POST-compatible image
5550 # This option controls creation of an entry describing a
5551 # POST-startup RedBoot image in the fis init command.
5552 # Not all platforms support POST-startup. A platform
5553 # might have both for testing purposes, where the
5554 # eventual user would substitute their own POST code for
5555 # the initial ROM-startup RedBoot, and then jump to the
5556 # POST-compatible RedBoot immediately following.
5558 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5560 # No user value, uncomment the following line to provide one.
5562 # value_source default
5563 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5564 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5569 # Offset of POST image from FLASH start
5570 # This option specifies the offset for a POST image from
5571 # the start of FLASH. If unset, then the fis entry
5572 # describing the POST image will be placed where
5575 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5576 # This option is not active
5577 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5580 # No user value, uncomment the following line to provide one.
5582 # value_source default
5583 # Default value: 0 0
5584 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5585 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5586 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5589 # The following properties are affected by this value
5590 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5591 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5595 # File to describe RedBoot backup image
5596 # This option controls creation of an entry describing a
5597 # backup RedBoot image in the fis init command.
5598 # Conventionally a RAM-startup RedBoot image is kept
5599 # under this name for use in updating the ROM-based
5600 # RedBoot that boots the board.
5602 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5604 # No user value, uncomment the following line to provide one.
5606 # value_source default
5610 # Include ARM SIB ID in FIS
5611 # If set, this option will cause the last 5 words of
5612 # the FIS to include the special ID needed for the
5613 # flash to be recognized as a reserved area for RedBoot
5614 # by an ARM BootRom monitor.
5616 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5618 # No user value, uncomment the following line to provide one.
5620 # value_source default
5624 # Size of FIS directory entry
5625 # The FIS directory is limited to one single flash
5626 # sector. If your flash has tiny sectors, you may wish
5627 # to reduce this value in order to get more slots in
5628 # the FIS directory.
5630 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5632 # No user value, uncomment the following line to provide one.
5634 # value_source default
5635 # Default value: 256
5638 # Number of FIS directory entries
5639 # The FIS directory normally occupies a single flash
5640 # sector. Adjusting this value can allow for more than
5641 # one flash sector to be used, which is useful if your
5642 # sectors are very small.
5644 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5646 # No user value, uncomment the following line to provide one.
5648 # value_source default
5652 # Maximum RedBoot image size
5653 # This option controls the maximum length reserved
5654 # for the RedBoot boot image in the FIS table.
5655 # This should be a multiple of the flash's erase
5658 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5660 # No user value, uncomment the following line to provide one.
5661 # user_value 0x00020000
5662 # The inferred value should not be edited directly.
5663 inferred_value 0x00040000
5664 # value_source inferred
5665 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5666 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5670 # Offset from start of FLASH to RedBoot boot image
5671 # This option controls where the RedBoot boot image is
5672 # located relative to the start of FLASH.
5674 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5676 # No user value, uncomment the following line to provide one.
5678 # value_source default
5679 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5680 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5682 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5683 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5684 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5687 # The following properties are affected by this value
5688 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5689 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5690 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5691 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5692 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5693 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5696 # Size of reserved area at start of FLASH
5697 # This option reserves an area at the start of
5698 # FLASH where RedBoot will never interfere; it is
5699 # expected that this area contains
5700 # (non-RedBoot-based) POST code or some other boot
5701 # monitor that executes before RedBoot.
5703 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5705 # No user value, uncomment the following line to provide one.
5707 # value_source default
5710 # The following properties are affected by this value
5711 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5712 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5713 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5714 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5715 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5716 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5720 # Keep all RedBoot FLASH data blocks locked.
5721 # When this option is enabled, RedBoot will keep configuration
5722 # data and the FIS directory blocks implicitly locked. While
5723 # this is somewhat safer, it does add overhead during updates.
5725 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5726 # This option is not active
5727 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5728 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5732 # No user value, uncomment the following line to provide one.
5734 # value_source default
5738 # Use CRC checksums on FIS images.
5739 # When this option is enabled, RedBoot will use CRC checksums
5740 # when reading and writing flash images.
5742 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5744 # No user value, uncomment the following line to provide one.
5746 # The inferred value should not be edited directly.
5748 # value_source inferred
5752 # ARM FLASH drivers support SIB flash block structure
5753 # This interface is implemented by a flash driver
5754 # to indicate that it supports the ARM SIB flash
5757 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5758 # No options implement this inferface
5759 # ActiveIf constraint: CYGPKG_HAL_ARM
5760 # CYGPKG_HAL_ARM == current
5763 # This value cannot be modified here.
5767 # The following properties are affected by this value
5768 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5769 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5772 # Use ARM SIB flash block structure
5773 # This option is used to interpret ARM Flash System
5774 # information blocks.
5776 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5777 # This option is not active
5778 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5779 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5783 # No user value, uncomment the following line to provide one.
5785 # value_source default
5790 # Keep RedBoot configuration data in FLASH
5791 # When this option is enabled, RedBoot will keep configuration
5792 # data in a separate block of FLASH memory. This data will
5793 # include such items as the node IP address or startup scripts.
5795 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5797 # No user value, uncomment the following line to provide one.
5799 # value_source default
5800 # Default value: CYGPKG_IO_FLASH != 0
5801 # CYGPKG_IO_FLASH == current
5804 # The following properties are affected by this value
5805 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5806 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5807 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5808 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5809 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5810 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5811 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5812 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5813 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5814 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5815 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5816 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5817 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5818 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5822 # Length of configuration data in FLASH
5823 # This option is used to control the amount of memory and FLASH
5824 # to be used for configuration options (persistent storage).
5826 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5828 # No user value, uncomment the following line to provide one.
5830 # value_source default
5831 # Default value: 4096
5834 # Style of media used for persistent data storage
5835 # Persistent data storage can either be held in 'norma' FLASH
5836 # or some other device (represented by the 'EEPROM' choice).
5837 # The different styles utilize different access methods.
5839 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5841 # No user value, uncomment the following line to provide one.
5843 # value_source default
5844 # Default value: FLASH
5845 # Legal values: "FLASH" "EEPROM"
5847 # The following properties are affected by this value
5848 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5849 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5850 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5851 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5854 # Merged config data and FIS directory
5855 # If this option is set, then the FIS directory and FLASH
5856 # configuration database will be stored in the same physical
5859 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5860 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5861 # CYGOPT_REDBOOT_FIS == 1
5862 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5866 # No user value, uncomment the following line to provide one.
5868 # value_source default
5871 # The following properties are affected by this value
5872 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5873 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5876 # Which block of flash to use
5877 # Which block of flash should hold the configuration
5878 # information. Positive numbers are absolute block numbers.
5879 # Negative block numbers count backwards from the last block.
5880 # eg 2 means block 2, -2 means the last but one block.
5882 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5884 # No user value, uncomment the following line to provide one.
5886 # value_source default
5890 # Support simple macros/aliases in FLASH
5891 # This option is used to allow support for simple text-based
5892 # macros (aliases). These aliases are kept in the FLASH
5893 # configuration data (persistent storage).
5895 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5897 # No user value, uncomment the following line to provide one.
5899 # value_source default
5903 # Length of strings in FLASH configuration data
5904 # This option is used to control the amount of memory
5905 # and FLASH to be used for string configuration
5906 # options (persistent storage).
5908 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5910 # No user value, uncomment the following line to provide one.
5912 # value_source default
5913 # Default value: 128
5916 # Length of configuration script(s) in FLASH
5917 # This option is used to control the amount of memory and
5918 # FLASH to be used for configuration options (persistent
5921 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5923 # No user value, uncomment the following line to provide one.
5925 # The inferred value should not be edited directly.
5927 # value_source inferred
5928 # Default value: 512
5931 # Fallback to read-only FLASH configuration
5932 # This option will cause the configuration information to
5933 # revert to the readonly information stored in the FLASH.
5934 # The option only takes effect after
5935 # 1) the config_ok flag has been set to be true,
5936 # indicating that at one time the copy in RAM was valid;
5938 # 2) the information in RAM has been verified to be invalid
5940 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5942 # No user value, uncomment the following line to provide one.
5944 # value_source default
5945 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5946 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5951 # Allow RedBoot to support fileio
5952 # If this option is enabled then RedBoot will provide commands
5953 # to load files from fileio file systems such as JFFS2.
5955 cdl_component CYGPKG_REDBOOT_FILEIO {
5956 # This option is not active
5957 # ActiveIf constraint: CYGPKG_IO_FILEIO
5958 # CYGPKG_IO_FILEIO (unknown) == 0
5962 # No user value, uncomment the following line to provide one.
5964 # value_source default
5967 # The following properties are affected by this value
5968 # option CYGNUM_REDBOOT_GETC_BUFFER
5969 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5973 # Include an ls command
5974 # If this option is enabled a simple ls command will be
5975 # included in redboot so the contents of a directory
5978 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5979 # This option is not active
5980 # The parent CYGPKG_REDBOOT_FILEIO is not active
5983 # No user value, uncomment the following line to provide one.
5985 # value_source default
5990 # Allow RedBoot to support disks
5991 # If this option is enabled then RedBoot will provide commands
5992 # to load disk files.
5994 cdl_component CYGPKG_REDBOOT_DISK {
6002 # Include Redboot commands for disk access
6004 cdl_option CYGSEM_REDBOOT_DISK {
6005 # This option is not active
6006 # The parent CYGPKG_REDBOOT_DISK is disabled
6009 # No user value, uncomment the following line to provide one.
6011 # value_source default
6012 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6013 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6017 # Hardware drivers for disk-type devices
6019 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6020 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6021 # This option is not active
6022 # The parent CYGPKG_REDBOOT_DISK is disabled
6024 # This value cannot be modified here.
6028 # The following properties are affected by this value
6029 # option CYGSEM_REDBOOT_DISK
6030 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6033 # Maximum number of supported disks
6034 # This option controls the number of disks supported by
6037 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6038 # This option is not active
6039 # The parent CYGPKG_REDBOOT_DISK is disabled
6042 # No user value, uncomment the following line to provide one.
6044 # value_source default
6048 # Maximum number of partitions per disk
6049 # This option controls the maximum number of supported
6050 # partitions per disk.
6052 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6053 # This option is not active
6054 # The parent CYGPKG_REDBOOT_DISK is disabled
6057 # No user value, uncomment the following line to provide one.
6059 # value_source default
6063 # Support IDE disks.
6064 # When this option is enabled, RedBoot will support IDE disks.
6066 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6067 # This option is not active
6068 # The parent CYGPKG_REDBOOT_DISK is disabled
6069 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6070 # CYGINT_HAL_PLF_IF_IDE == 0
6074 # No user value, uncomment the following line to provide one.
6076 # value_source default
6081 # Work with VMware virtual disks
6082 # This option controls the disk driver behavior at
6085 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6086 # This option is not active
6087 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6090 # No user value, uncomment the following line to provide one.
6092 # value_source default
6097 # Support Linux second extended filesystems.
6098 # When this option is enabled, RedBoot will support EXT2
6101 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6102 # This option is not active
6103 # The parent CYGPKG_REDBOOT_DISK is disabled
6106 # No user value, uncomment the following line to provide one.
6108 # value_source default
6112 # Support ISO9660 filesystems.
6113 # When this option is enabled, RedBoot will support ISO9660
6116 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6117 # This option is not active
6118 # The parent CYGPKG_REDBOOT_DISK is disabled
6120 # Calculated value: 0
6127 # doc: ref/persistent-state-flash.html
6128 # This contains options related to RedBoot's boot script
6131 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6132 # There is no associated value.
6136 # Boot scripting enabled
6137 # This option controls whether RedBoot boot script
6138 # functionality is enabled.
6140 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6141 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6142 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6143 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6146 # Calculated value: 1
6151 # Use default RedBoot boot script
6152 # If enabled, this option will tell RedBoot to use the
6153 # value of this option as a default boot script.
6155 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6157 # No user value, uncomment the following line to provide one.
6159 # The inferred value should not be edited directly.
6161 # value_source inferred
6162 # Default value: 0 0
6164 # The following properties are affected by this value
6165 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6166 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6169 # Resolution (in ms) for script timeout value.
6170 # This option controls the resolution of the script
6171 # timeout. The value is specified in milliseconds
6172 # (ms), thus to have the script timeout be defined in
6173 # terms of tenths of seconds, use 100.
6175 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6177 # No user value, uncomment the following line to provide one.
6179 # The inferred value should not be edited directly.
6181 # value_source inferred
6182 # Default value: 1000
6185 # Script default timeout value
6186 # This option is used to set the default timeout for startup
6187 # scripts, when they are enabled.
6189 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6191 # No user value, uncomment the following line to provide one.
6193 # The inferred value should not be edited directly.
6195 # value_source inferred
6200 # Support RTC for time & date functions
6201 # When this option is enabled, RedBoot will support commands to
6202 # query and set the real time clock (time and date)
6204 cdl_option CYGSEM_REDBOOT_RTC {
6205 # This option is not active
6206 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6207 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6211 # No user value, uncomment the following line to provide one.
6213 # value_source default
6217 # Behave like a ROM monitor
6218 # Enabling this option will allow RedBoot to provide ROM
6219 # monitor-style services to programs which it executes.
6221 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6222 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6223 # CYG_HAL_STARTUP == ROMRAM
6224 # CYG_HAL_STARTUP == ROMRAM
6227 # Calculated value: 1
6230 # Requires: CYGSEM_HAL_ROM_MONITOR
6231 # CYGSEM_HAL_ROM_MONITOR == 1
6235 # Allow RedBoot to handle GNUPro application 'syscalls'.
6236 # If this option is enabled then RedBoot will install a
6237 # syscall handler to support debugging of applications
6238 # based on GNUPro newlib/bsp.
6240 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6242 # No user value, uncomment the following line to provide one.
6244 # value_source default
6247 # The following properties are affected by this value
6248 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6249 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6250 # option CYGPKG_HAL_GDB_FILEIO
6251 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6255 # Support additional syscalls for 'gprof' profiling
6256 # Support additional syscalls to support a periodic callback
6257 # function for histogram-style profiling, and an enquire/set
6259 # The application must use the GNUPro newlib facilities
6262 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6263 # This option is not active
6264 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6265 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6266 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6270 # No user value, uncomment the following line to provide one.
6272 # value_source default
6276 # Does the HAL support 'gprof' profiling?
6278 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6279 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6280 # This option is not active
6281 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6283 # This value cannot be modified here.
6287 # The following properties are affected by this value
6288 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6289 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6292 # Do not raise SIGTRAP when program exits
6293 # For some (single shot) newlib based programs,
6294 # exiting and returning a termination status may be
6295 # the normal expected behavior.
6297 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6298 # This option is not active
6299 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6302 # No user value, uncomment the following line to provide one.
6304 # value_source default
6309 # Use a common buffer for Zlib and FIS
6310 # Use a common memory buffer for both the zlib workspace
6311 # and FIS directory operations. This can save a substantial
6312 # amount of RAM, especially when flash sectors are large.
6314 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6315 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6316 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6317 # CYGOPT_REDBOOT_FIS == 1
6321 # No user value, uncomment the following line to provide one.
6323 # value_source default
6328 # Size of Zlib/FIS common buffer
6329 # Size of common buffer to allocate. Must be at least the
6330 # size of one flash sector.
6332 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6333 # This option is not active
6334 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6337 # No user value, uncomment the following line to provide one.
6338 # user_value 0x0000C000
6339 # value_source default
6340 # Default value: 0x0000C000
6341 # Legal values: 0x4000 to 0x80000000
6345 # Buffer size in getc when loading images
6346 # When loading images a buffer is used between redboot and the
6347 # underlying storage medium, eg a filesystem, or a socket etc.
6348 # The size of this buffer can have a big impart on load speed.
6350 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6352 # No user value, uncomment the following line to provide one.
6354 # value_source default
6355 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6356 # CYGPKG_REDBOOT_FILEIO == 0
6361 # Redboot for ARM options
6362 # This option lists the target's requirements for a valid Redboot
6365 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6366 # ActiveIf constraint: CYGPKG_REDBOOT
6367 # CYGPKG_REDBOOT == current
6370 # There is no associated value.
6372 # The following properties are affected by this value
6376 # Provide the exec command in RedBoot
6377 # This option contains requirements for booting linux
6378 # from RedBoot. The component is enabled/disabled from
6381 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6382 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6383 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6386 # There is no associated value.
6390 # Enable -x switch for exec command.
6391 # This option allows bi-endian platforms to launch kernels
6392 # built for an endianess different than the RedBoot endianess
6394 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6396 # No user value, uncomment the following line to provide one.
6398 # value_source default
6402 # Physical base address of linux kernel
6403 # This is the physical address of the base of the
6404 # Linux kernel image.
6406 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6408 # No user value, uncomment the following line to provide one.
6409 # user_value 0xA0108000
6410 # value_source default
6411 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6412 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6416 # Default physical base address of linux kernel
6417 # This is the physical address of the base of the
6418 # Linux kernel image. This option gets set by the
6421 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6423 # No user value, uncomment the following line to provide one.
6424 # user_value 0x00008000
6425 # The inferred value should not be edited directly.
6426 inferred_value 0xA0108000
6427 # value_source inferred
6428 # Default value: 0x00008000
6430 # The following properties are affected by this value
6431 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6432 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6433 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6434 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6437 # Base address of linux kernel parameter tags
6438 # This is the base address of the area of memory used to
6439 # pass parameters to the Linux kernel. This should be chosen
6440 # to avoid overlap with the kernel and any ramdisk image.
6442 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6444 # No user value, uncomment the following line to provide one.
6445 # user_value 0x00000100
6446 # value_source default
6447 # Default value: 0x00000100
6452 # Redboot HAL options
6453 # This option lists the target's requirements for a valid Redboot
6456 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6457 # ActiveIf constraint: CYGPKG_REDBOOT
6458 # CYGPKG_REDBOOT == current
6461 # There is no associated value.
6465 # Build Redboot ROM binary image
6466 # This option enables the conversion of the Redboot ELF
6467 # image to a binary image suitable for ROM programming.
6469 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6470 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6471 # CYGBLD_BUILD_REDBOOT == 1
6475 # No user value, uncomment the following line to provide one.
6477 # value_source default
6482 # Redboot HAL variant options
6484 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6485 # ActiveIf constraint: CYGPKG_REDBOOT
6486 # CYGPKG_REDBOOT == current
6489 # There is no associated value.
6490 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6491 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6496 # ISO C and POSIX infrastructure
6497 # eCos supports implementations of ISO C libraries and POSIX
6498 # implementations. This package provides infrastructure used by
6499 # all such implementations.
6501 cdl_package CYGPKG_ISOINFRA {
6502 # Packages cannot be added or removed, nor can their version be changed,
6503 # simply by editing their value. Instead the appropriate configuration
6504 # should be used to perform these actions.
6506 # This value cannot be modified here.
6508 # Current value: 1 current
6510 # The following properties are affected by this value
6511 # component CYGBLD_BUILD_REDBOOT
6512 # Requires: CYGPKG_ISOINFRA
6513 # package CYGPKG_LIBC_STRING
6514 # Requires: CYGPKG_ISOINFRA
6515 # package CYGPKG_COMPRESS_ZLIB
6516 # Requires: CYGPKG_ISOINFRA
6517 # package CYGPKG_IO_FLASH
6518 # Requires: CYGPKG_ISOINFRA
6519 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6520 # Requires: CYGPKG_ISOINFRA
6521 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6522 # DefaultValue: 0 != CYGPKG_ISOINFRA
6523 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6524 # ActiveIf: CYGPKG_ISOINFRA
6525 # package CYGPKG_LIBC_I18N
6526 # Requires: CYGPKG_ISOINFRA
6527 # package CYGPKG_LIBC_STDLIB
6528 # Requires: CYGPKG_ISOINFRA
6532 # Startup and termination
6534 cdl_component CYGPKG_ISO_STARTUP {
6535 # There is no associated value.
6539 # main() startup implementations
6540 # Implementations of this interface arrange for a user-supplied
6541 # main() to be called in an ISO compatible environment.
6543 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6544 # No options implement this inferface
6545 # This value cannot be modified here.
6548 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6549 # CYGINT_ISO_MAIN_STARTUP == 0
6552 # The following properties are affected by this value
6553 # interface CYGINT_ISO_MAIN_STARTUP
6554 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6557 # environ implementations
6558 # Implementations of this interface provide the environ
6559 # variable required by POSIX.
6561 cdl_interface CYGINT_ISO_ENVIRON {
6562 # No options implement this inferface
6563 # This value cannot be modified here.
6566 # Requires: 1 >= CYGINT_ISO_ENVIRON
6567 # CYGINT_ISO_ENVIRON == 0
6570 # The following properties are affected by this value
6571 # interface CYGINT_ISO_ENVIRON
6572 # Requires: 1 >= CYGINT_ISO_ENVIRON
6578 cdl_component CYGPKG_ISO_CTYPE_H {
6579 # There is no associated value.
6583 # Number of implementations of ctype functions
6585 cdl_interface CYGINT_ISO_CTYPE {
6586 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6587 # This value cannot be modified here.
6590 # Requires: 1 >= CYGINT_ISO_CTYPE
6591 # CYGINT_ISO_CTYPE == 1
6594 # The following properties are affected by this value
6595 # interface CYGINT_ISO_CTYPE
6596 # Requires: 1 >= CYGINT_ISO_CTYPE
6597 # package CYGPKG_HAL_ARM_TX27KARO
6598 # Requires: CYGINT_ISO_CTYPE
6599 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6600 # Requires: CYGINT_ISO_CTYPE
6601 # package CYGPKG_LIBC_STDLIB
6602 # Requires: CYGINT_ISO_CTYPE
6605 # Ctype implementation header
6607 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6609 # No user value, uncomment the following line to provide one.
6611 # The inferred value should not be edited directly.
6612 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6613 # value_source inferred
6614 # Default value: 0 0
6616 # The following properties are affected by this value
6617 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6618 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6619 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6620 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6626 cdl_component CYGPKG_ISO_ERRNO {
6627 # There is no associated value.
6631 # Number of implementations of error codes
6633 cdl_interface CYGINT_ISO_ERRNO_CODES {
6634 # Implemented by CYGPKG_ERROR, active, enabled
6635 # This value cannot be modified here.
6638 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6639 # CYGINT_ISO_ERRNO_CODES == 1
6642 # The following properties are affected by this value
6643 # interface CYGINT_ISO_ERRNO_CODES
6644 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6647 # Error codes implementation header
6649 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6651 # No user value, uncomment the following line to provide one.
6653 # The inferred value should not be edited directly.
6654 inferred_value 1 <cyg/error/codes.h>
6655 # value_source inferred
6656 # Default value: 0 0
6658 # The following properties are affected by this value
6659 # package CYGPKG_ERROR
6660 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6663 # Number of implementations of errno variable
6665 cdl_interface CYGINT_ISO_ERRNO {
6666 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6667 # This value cannot be modified here.
6670 # Requires: 1 >= CYGINT_ISO_ERRNO
6671 # CYGINT_ISO_ERRNO == 1
6674 # The following properties are affected by this value
6675 # interface CYGINT_ISO_ERRNO
6676 # Requires: 1 >= CYGINT_ISO_ERRNO
6679 # errno variable implementation header
6681 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6683 # No user value, uncomment the following line to provide one.
6685 # The inferred value should not be edited directly.
6686 inferred_value 1 <cyg/error/errno.h>
6687 # value_source inferred
6688 # Default value: 0 0
6690 # The following properties are affected by this value
6691 # component CYGPKG_ERROR_ERRNO
6692 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6696 # Locale-related functions
6698 cdl_component CYGPKG_ISO_LOCALE {
6699 # There is no associated value.
6703 # Number of implementations of locale functions
6705 cdl_interface CYGINT_ISO_LOCALE {
6706 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6707 # This value cannot be modified here.
6710 # Requires: 1 >= CYGINT_ISO_LOCALE
6711 # CYGINT_ISO_LOCALE == 1
6714 # The following properties are affected by this value
6715 # interface CYGINT_ISO_LOCALE
6716 # Requires: 1 >= CYGINT_ISO_LOCALE
6719 # Locale implementation header
6721 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6723 # No user value, uncomment the following line to provide one.
6725 # value_source default
6726 # Default value: 0 0
6730 # Standard I/O-related functionality
6732 cdl_component CYGPKG_ISO_STDIO {
6733 # There is no associated value.
6737 # Number of implementations of stdio file types
6739 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6740 # No options implement this inferface
6741 # This value cannot be modified here.
6743 # Current value: 0 0
6744 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6745 # CYGINT_ISO_STDIO_FILETYPES == 0
6748 # The following properties are affected by this value
6749 # interface CYGINT_ISO_STDIO_FILETYPES
6750 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6753 # Stdio file types implementation header
6755 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6757 # No user value, uncomment the following line to provide one.
6759 # value_source default
6760 # Default value: 0 0
6763 # Stdio standard streams implementations
6765 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6766 # No options implement this inferface
6767 # This value cannot be modified here.
6769 # Current value: 0 0
6770 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6771 # CYGINT_ISO_STDIO_STREAMS == 0
6774 # The following properties are affected by this value
6775 # interface CYGINT_ISO_STDIO_STREAMS
6776 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6779 # Stdio standard streams implementation header
6780 # This header file must define stdin, stdout
6783 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6785 # No user value, uncomment the following line to provide one.
6787 # value_source default
6788 # Default value: 0 0
6791 # Number of implementations of stdio file operations
6793 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6794 # No options implement this inferface
6795 # This value cannot be modified here.
6797 # Current value: 0 0
6798 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6799 # CYGINT_ISO_STDIO_FILEOPS == 0
6802 # The following properties are affected by this value
6803 # interface CYGINT_ISO_STDIO_FILEOPS
6804 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6807 # Stdio file operations implementation header
6808 # This header controls the file system operations on a file
6809 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6812 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6814 # No user value, uncomment the following line to provide one.
6816 # value_source default
6817 # Default value: 0 0
6820 # Number of implementations of stdio file access functionals
6822 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6823 # No options implement this inferface
6824 # This value cannot be modified here.
6826 # Current value: 0 0
6827 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6828 # CYGINT_ISO_STDIO_FILEACCESS == 0
6831 # The following properties are affected by this value
6832 # interface CYGINT_ISO_STDIO_FILEACCESS
6833 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6834 # option CYGFUN_COMPRESS_ZLIB_GZIO
6835 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6838 # Stdio file access implementation header
6839 # This header controls the file access operations
6840 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6841 # setvbuf(), and associated constants.
6843 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6845 # No user value, uncomment the following line to provide one.
6847 # value_source default
6848 # Default value: 0 0
6851 # Number of implementations of stdio formatted I/O
6853 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6854 # No options implement this inferface
6855 # This value cannot be modified here.
6857 # Current value: 0 0
6858 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6859 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6862 # The following properties are affected by this value
6863 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6864 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6865 # option CYGFUN_COMPRESS_ZLIB_GZIO
6866 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6869 # Stdio formatted I/O implementation header
6871 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6873 # No user value, uncomment the following line to provide one.
6875 # value_source default
6876 # Default value: 0 0
6879 # Number of implementations of stdio character I/O
6881 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6882 # No options implement this inferface
6883 # This value cannot be modified here.
6885 # Current value: 0 0
6886 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6887 # CYGINT_ISO_STDIO_CHAR_IO == 0
6890 # The following properties are affected by this value
6891 # interface CYGINT_ISO_STDIO_CHAR_IO
6892 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6895 # Stdio character I/O implementation header
6897 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6899 # No user value, uncomment the following line to provide one.
6901 # value_source default
6902 # Default value: 0 0
6905 # Number of implementations of stdio direct I/O
6907 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6908 # No options implement this inferface
6909 # This value cannot be modified here.
6911 # Current value: 0 0
6912 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6913 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6916 # The following properties are affected by this value
6917 # interface CYGINT_ISO_STDIO_DIRECT_IO
6918 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6921 # Stdio direct I/O implementation header
6923 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6925 # No user value, uncomment the following line to provide one.
6927 # value_source default
6928 # Default value: 0 0
6931 # Number of implementations of stdio file positioning
6933 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6934 # No options implement this inferface
6935 # This value cannot be modified here.
6937 # Current value: 0 0
6938 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6939 # CYGINT_ISO_STDIO_FILEPOS == 0
6942 # The following properties are affected by this value
6943 # interface CYGINT_ISO_STDIO_FILEPOS
6944 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6945 # option CYGFUN_COMPRESS_ZLIB_GZIO
6946 # Requires: CYGINT_ISO_STDIO_FILEPOS
6949 # Stdio file positioning implementation header
6951 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6953 # No user value, uncomment the following line to provide one.
6955 # value_source default
6956 # Default value: 0 0
6959 # Number of implementations of stdio error handling
6961 cdl_interface CYGINT_ISO_STDIO_ERROR {
6962 # No options implement this inferface
6963 # This value cannot be modified here.
6965 # Current value: 0 0
6966 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6967 # CYGINT_ISO_STDIO_ERROR == 0
6970 # The following properties are affected by this value
6971 # interface CYGINT_ISO_STDIO_ERROR
6972 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6975 # Stdio error handling implementation header
6977 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6979 # No user value, uncomment the following line to provide one.
6981 # value_source default
6982 # Default value: 0 0
6985 # POSIX fd-related function implementations
6987 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6988 # No options implement this inferface
6989 # This value cannot be modified here.
6991 # Current value: 0 0
6992 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6993 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6996 # The following properties are affected by this value
6997 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6998 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7001 # POSIX fd-related function implementation header
7003 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7005 # No user value, uncomment the following line to provide one.
7007 # value_source default
7008 # Default value: 0 0
7012 # Standard general utility functions
7014 cdl_component CYGPKG_ISO_STDLIB {
7015 # There is no associated value.
7019 # String conversion function implementations
7021 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7022 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7023 # This value cannot be modified here.
7026 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7027 # CYGINT_ISO_STDLIB_STRCONV == 1
7030 # The following properties are affected by this value
7031 # interface CYGINT_ISO_STDLIB_STRCONV
7032 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7035 # String conversion function implementation header
7037 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7039 # No user value, uncomment the following line to provide one.
7041 # The inferred value should not be edited directly.
7042 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7043 # value_source inferred
7044 # Default value: 0 0
7046 # The following properties are affected by this value
7047 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7048 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7051 # String to FP conversion function implementations
7053 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7054 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7055 # This value cannot be modified here.
7058 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7059 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7062 # The following properties are affected by this value
7063 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7064 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7067 # String to FP conversion function implementation header
7069 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7071 # No user value, uncomment the following line to provide one.
7073 # value_source default
7074 # Default value: 0 0
7077 # Random number generator implementations
7079 cdl_interface CYGINT_ISO_RAND {
7080 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7081 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7082 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7083 # This value cannot be modified here.
7086 # Requires: 1 >= CYGINT_ISO_RAND
7087 # CYGINT_ISO_RAND == 1
7090 # The following properties are affected by this value
7091 # interface CYGINT_ISO_RAND
7092 # Requires: 1 >= CYGINT_ISO_RAND
7095 # Random number generator implementation header
7097 cdl_option CYGBLD_ISO_RAND_HEADER {
7099 # No user value, uncomment the following line to provide one.
7101 # value_source default
7102 # Default value: 0 0
7105 # Malloc implementations
7107 cdl_interface CYGINT_ISO_MALLOC {
7108 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7109 # This value cannot be modified here.
7112 # Requires: 1 >= CYGINT_ISO_MALLOC
7113 # CYGINT_ISO_MALLOC == 1
7116 # The following properties are affected by this value
7117 # interface CYGINT_ISO_MALLOC
7118 # Requires: 1 >= CYGINT_ISO_MALLOC
7119 # option CYGFUN_LIBC_STRING_STRDUP
7120 # ActiveIf: CYGINT_ISO_MALLOC
7123 # Malloc implementation header
7125 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7127 # No user value, uncomment the following line to provide one.
7129 # value_source default
7130 # Default value: 0 0
7133 # Mallinfo() implementations
7135 cdl_interface CYGINT_ISO_MALLINFO {
7136 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7137 # This value cannot be modified here.
7140 # Requires: 1 >= CYGINT_ISO_MALLINFO
7141 # CYGINT_ISO_MALLINFO == 1
7144 # The following properties are affected by this value
7145 # interface CYGINT_ISO_MALLINFO
7146 # Requires: 1 >= CYGINT_ISO_MALLINFO
7149 # Mallinfo() implementation header
7151 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7153 # No user value, uncomment the following line to provide one.
7155 # value_source default
7156 # Default value: 0 0
7159 # Program exit functionality implementations
7161 cdl_interface CYGINT_ISO_EXIT {
7162 # No options implement this inferface
7163 # This value cannot be modified here.
7166 # Requires: 1 >= CYGINT_ISO_EXIT
7167 # CYGINT_ISO_EXIT == 0
7170 # The following properties are affected by this value
7171 # interface CYGINT_ISO_EXIT
7172 # Requires: 1 >= CYGINT_ISO_EXIT
7173 # option CYGFUN_INFRA_DUMMY_ABORT
7174 # Requires: !CYGINT_ISO_EXIT
7175 # option CYGFUN_INFRA_DUMMY_ABORT
7176 # DefaultValue: CYGINT_ISO_EXIT == 0
7179 # Program exit functionality implementation header
7181 cdl_option CYGBLD_ISO_EXIT_HEADER {
7183 # No user value, uncomment the following line to provide one.
7185 # value_source default
7186 # Default value: 0 0
7189 # Program environment implementations
7191 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7192 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7193 # This value cannot be modified here.
7196 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7197 # CYGINT_ISO_STDLIB_ENVIRON == 1
7200 # The following properties are affected by this value
7201 # interface CYGINT_ISO_STDLIB_ENVIRON
7202 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7205 # Program environment implementation header
7207 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7209 # No user value, uncomment the following line to provide one.
7211 # value_source default
7212 # Default value: 0 0
7215 # system() implementations
7217 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7218 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7219 # This value cannot be modified here.
7222 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7223 # CYGINT_ISO_STDLIB_SYSTEM == 1
7226 # The following properties are affected by this value
7227 # interface CYGINT_ISO_STDLIB_SYSTEM
7228 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7231 # system() implementation header
7233 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7235 # No user value, uncomment the following line to provide one.
7237 # value_source default
7238 # Default value: 0 0
7241 # bsearch() implementations
7243 cdl_interface CYGINT_ISO_BSEARCH {
7244 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7245 # This value cannot be modified here.
7248 # Requires: 1 >= CYGINT_ISO_BSEARCH
7249 # CYGINT_ISO_BSEARCH == 1
7252 # The following properties are affected by this value
7253 # interface CYGINT_ISO_BSEARCH
7254 # Requires: 1 >= CYGINT_ISO_BSEARCH
7257 # bsearch() implementation header
7259 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7261 # No user value, uncomment the following line to provide one.
7263 # value_source default
7264 # Default value: 0 0
7267 # qsort() implementations
7269 cdl_interface CYGINT_ISO_QSORT {
7270 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7271 # This value cannot be modified here.
7274 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7275 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7278 # The following properties are affected by this value
7281 # qsort() implementation header
7283 cdl_option CYGBLD_ISO_QSORT_HEADER {
7285 # No user value, uncomment the following line to provide one.
7287 # value_source default
7288 # Default value: 0 0
7291 # abs()/labs() implementations
7293 cdl_interface CYGINT_ISO_ABS {
7294 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7295 # This value cannot be modified here.
7298 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7299 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7302 # The following properties are affected by this value
7305 # abs()/labs() implementation header
7307 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7309 # No user value, uncomment the following line to provide one.
7311 # The inferred value should not be edited directly.
7312 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7313 # value_source inferred
7314 # Default value: 0 0
7316 # The following properties are affected by this value
7317 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7318 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7321 # div()/ldiv() implementations
7323 cdl_interface CYGINT_ISO_DIV {
7324 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7325 # This value cannot be modified here.
7328 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7329 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7332 # The following properties are affected by this value
7335 # div()/ldiv() implementation header
7337 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7339 # No user value, uncomment the following line to provide one.
7341 # The inferred value should not be edited directly.
7342 inferred_value 1 <cyg/libc/stdlib/div.inl>
7343 # value_source inferred
7344 # Default value: 0 0
7346 # The following properties are affected by this value
7347 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7348 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7351 # Header defining the implementation's MB_CUR_MAX
7353 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7355 # No user value, uncomment the following line to provide one.
7357 # value_source default
7358 # Default value: 0 0
7360 # The following properties are affected by this value
7361 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7362 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7365 # Multibyte character implementations
7367 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7368 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7369 # This value cannot be modified here.
7372 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7373 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7376 # The following properties are affected by this value
7377 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7378 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7381 # Multibyte character implementation header
7383 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7385 # No user value, uncomment the following line to provide one.
7387 # value_source default
7388 # Default value: 0 0
7394 cdl_component CYGPKG_ISO_STRING {
7395 # There is no associated value.
7399 # Number of implementations of strerror() function
7401 cdl_interface CYGINT_ISO_STRERROR {
7402 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7403 # This value cannot be modified here.
7405 # Current value: 1 1
7406 # Requires: 1 >= CYGINT_ISO_STRERROR
7407 # CYGINT_ISO_STRERROR == 1
7410 # The following properties are affected by this value
7411 # interface CYGINT_ISO_STRERROR
7412 # Requires: 1 >= CYGINT_ISO_STRERROR
7415 # strerror() implementation header
7417 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7419 # No user value, uncomment the following line to provide one.
7421 # The inferred value should not be edited directly.
7422 inferred_value 1 <cyg/error/strerror.h>
7423 # value_source inferred
7424 # Default value: 0 0
7426 # The following properties are affected by this value
7427 # option CYGPKG_ERROR_STRERROR
7428 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7431 # memcpy() implementation header
7433 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7435 # No user value, uncomment the following line to provide one.
7437 # value_source default
7438 # Default value: 0 0
7441 # memset() implementation header
7443 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7445 # No user value, uncomment the following line to provide one.
7447 # value_source default
7448 # Default value: 0 0
7451 # Number of implementations of strtok_r() function
7453 cdl_interface CYGINT_ISO_STRTOK_R {
7454 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7455 # This value cannot be modified here.
7457 # Current value: 1 1
7458 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7459 # CYGINT_ISO_STRTOK_R == 1
7462 # The following properties are affected by this value
7463 # interface CYGINT_ISO_STRTOK_R
7464 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7467 # strtok_r() implementation header
7469 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7471 # No user value, uncomment the following line to provide one.
7473 # The inferred value should not be edited directly.
7474 inferred_value 1 <cyg/libc/string/string.h>
7475 # value_source inferred
7476 # Default value: 0 0
7478 # The following properties are affected by this value
7479 # package CYGPKG_LIBC_STRING
7480 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7483 # Number of implementations of locale-specific string functions
7484 # This covers locale-dependent string functions such as strcoll()
7487 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7488 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7489 # This value cannot be modified here.
7491 # Current value: 1 1
7492 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7493 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7496 # The following properties are affected by this value
7497 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7498 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7501 # Locale-specific string functions' implementation header
7502 # This covers locale-dependent string functions such as strcoll()
7505 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7507 # No user value, uncomment the following line to provide one.
7509 # The inferred value should not be edited directly.
7510 inferred_value 1 <cyg/libc/string/string.h>
7511 # value_source inferred
7512 # Default value: 0 0
7514 # The following properties are affected by this value
7515 # package CYGPKG_LIBC_STRING
7516 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7519 # Number of implementations of BSD string functions
7521 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7522 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7523 # This value cannot be modified here.
7525 # Current value: 0 0
7526 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7527 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7530 # The following properties are affected by this value
7531 # interface CYGINT_ISO_STRING_BSD_FUNCS
7532 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7535 # BSD string functions' implementation header
7537 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7539 # No user value, uncomment the following line to provide one.
7541 # The inferred value should not be edited directly.
7542 inferred_value 1 <cyg/libc/string/bsdstring.h>
7543 # value_source inferred
7544 # Default value: 0 0
7546 # The following properties are affected by this value
7547 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7548 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7551 # Number of implementations of other mem*() functions
7553 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7554 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7555 # This value cannot be modified here.
7557 # Current value: 1 1
7558 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7559 # CYGINT_ISO_STRING_MEMFUNCS == 1
7562 # The following properties are affected by this value
7563 # interface CYGINT_ISO_STRING_MEMFUNCS
7564 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7565 # component CYGBLD_BUILD_REDBOOT
7566 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7567 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7568 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7571 # Other mem*() functions' implementation header
7573 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7575 # No user value, uncomment the following line to provide one.
7577 # The inferred value should not be edited directly.
7578 inferred_value 1 <cyg/libc/string/string.h>
7579 # value_source inferred
7580 # Default value: 0 0
7582 # The following properties are affected by this value
7583 # package CYGPKG_LIBC_STRING
7584 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7587 # Number of implementations of other ISO C str*() functions
7588 # This covers the other str*() functions defined by ISO C.
7590 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7591 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7592 # This value cannot be modified here.
7594 # Current value: 1 1
7595 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7596 # CYGINT_ISO_STRING_STRFUNCS == 1
7599 # The following properties are affected by this value
7600 # interface CYGINT_ISO_STRING_STRFUNCS
7601 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7602 # option CYGFUN_INFRA_DUMMY_STRLEN
7603 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7604 # option CYGFUN_INFRA_DUMMY_STRLEN
7605 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7606 # component CYGBLD_BUILD_REDBOOT
7607 # Requires: CYGINT_ISO_STRING_STRFUNCS
7608 # component CYGPKG_IO_ETH_DRIVERS_NET
7609 # Requires: CYGINT_ISO_STRING_STRFUNCS
7610 # option CYGFUN_COMPRESS_ZLIB_GZIO
7611 # Requires: CYGINT_ISO_STRING_STRFUNCS
7612 # package CYGPKG_IO_FLASH
7613 # Requires: CYGINT_ISO_STRING_STRFUNCS
7614 # package CYGPKG_LIBC_STDLIB
7615 # Requires: CYGINT_ISO_STRING_STRFUNCS
7618 # Other ISO C str*() functions' implementation header
7619 # This covers the other str*() functions defined by ISO C.
7621 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7623 # No user value, uncomment the following line to provide one.
7625 # The inferred value should not be edited directly.
7626 inferred_value 1 <cyg/libc/string/string.h>
7627 # value_source inferred
7628 # Default value: 0 0
7630 # The following properties are affected by this value
7631 # package CYGPKG_LIBC_STRING
7632 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7636 # Clock and time functionality
7638 cdl_component CYGPKG_ISO_TIME {
7639 # There is no associated value.
7643 # time_t implementation header
7645 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7647 # No user value, uncomment the following line to provide one.
7649 # value_source default
7650 # Default value: 0 0
7653 # clock_t implementation header
7655 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7657 # No user value, uncomment the following line to provide one.
7659 # value_source default
7660 # Default value: 0 0
7663 # struct timeval implementation header
7665 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7667 # No user value, uncomment the following line to provide one.
7669 # value_source default
7670 # Default value: 0 0
7673 # fnmatch implementation header
7675 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7677 # No user value, uncomment the following line to provide one.
7679 # value_source default
7680 # Default value: 0 0
7683 # Number of implementations of POSIX timer types
7685 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7686 # No options implement this inferface
7687 # This value cannot be modified here.
7689 # Current value: 0 0
7690 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7691 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7694 # The following properties are affected by this value
7695 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7696 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7699 # POSIX timer types implementation header
7701 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7703 # No user value, uncomment the following line to provide one.
7705 # value_source default
7706 # Default value: 0 0
7709 # Number of implementations of POSIX clock types
7711 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7712 # No options implement this inferface
7713 # This value cannot be modified here.
7715 # Current value: 0 0
7716 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7717 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7720 # The following properties are affected by this value
7721 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7722 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7725 # POSIX clock types implementation header
7727 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7729 # No user value, uncomment the following line to provide one.
7731 # value_source default
7732 # Default value: 0 0
7735 # Number of implementations of ISO C types
7737 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7738 # No options implement this inferface
7739 # This value cannot be modified here.
7741 # Current value: 0 0
7742 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7743 # CYGINT_ISO_C_TIME_TYPES == 0
7746 # The following properties are affected by this value
7747 # interface CYGINT_ISO_C_TIME_TYPES
7748 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7751 # ISO C time types implementation header
7753 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7755 # No user value, uncomment the following line to provide one.
7757 # value_source default
7758 # Default value: 0 0
7761 # Number of implementations of POSIX timers
7763 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7764 # No options implement this inferface
7765 # This value cannot be modified here.
7767 # Current value: 0 0
7768 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7769 # CYGINT_ISO_POSIX_TIMERS == 0
7772 # The following properties are affected by this value
7773 # interface CYGINT_ISO_POSIX_TIMERS
7774 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7777 # POSIX timer implementation header
7779 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7781 # No user value, uncomment the following line to provide one.
7783 # value_source default
7784 # Default value: 0 0
7787 # Number of implementations of POSIX clocks
7789 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7790 # No options implement this inferface
7791 # This value cannot be modified here.
7793 # Current value: 0 0
7794 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7795 # CYGINT_ISO_POSIX_CLOCKS == 0
7798 # The following properties are affected by this value
7799 # interface CYGINT_ISO_POSIX_CLOCKS
7800 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7803 # POSIX clocks implementation header
7805 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7807 # No user value, uncomment the following line to provide one.
7809 # value_source default
7810 # Default value: 0 0
7813 # Number of implementations of ISO C clock functions
7815 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7816 # No options implement this inferface
7817 # This value cannot be modified here.
7819 # Current value: 0 0
7820 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7821 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7824 # The following properties are affected by this value
7825 # interface CYGINT_ISO_C_CLOCK_FUNCS
7826 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7829 # ISO C clock functions' implementation header
7831 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7833 # No user value, uncomment the following line to provide one.
7835 # value_source default
7836 # Default value: 0 0
7839 # Number of implementations of tzset() function
7841 cdl_interface CYGINT_ISO_TZSET {
7842 # No options implement this inferface
7843 # This value cannot be modified here.
7845 # Current value: 0 0
7846 # Requires: 1 >= CYGINT_ISO_TZSET
7847 # CYGINT_ISO_TZSET == 0
7850 # The following properties are affected by this value
7851 # interface CYGINT_ISO_TZSET
7852 # Requires: 1 >= CYGINT_ISO_TZSET
7855 # tzset() implementation header
7857 cdl_option CYGBLD_ISO_TZSET_HEADER {
7859 # No user value, uncomment the following line to provide one.
7861 # value_source default
7862 # Default value: 0 0
7866 # Signal functionality
7868 cdl_component CYGPKG_ISO_SIGNAL {
7869 # There is no associated value.
7873 # Number of implementations of signal numbers
7875 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7876 # No options implement this inferface
7877 # This value cannot be modified here.
7880 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7881 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7884 # The following properties are affected by this value
7885 # interface CYGINT_ISO_SIGNAL_NUMBERS
7886 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7889 # Signal numbering implementation header
7890 # This header provides the mapping of signal
7891 # names (e.g. SIGBUS) to numbers.
7893 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7895 # No user value, uncomment the following line to provide one.
7897 # value_source default
7898 # Default value: 0 0
7901 # Number of signal implementations
7903 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7904 # No options implement this inferface
7905 # This value cannot be modified here.
7908 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7909 # CYGINT_ISO_SIGNAL_IMPL == 0
7912 # The following properties are affected by this value
7913 # interface CYGINT_ISO_SIGNAL_IMPL
7914 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7917 # Signals implementation header
7919 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7921 # No user value, uncomment the following line to provide one.
7923 # value_source default
7924 # Default value: 0 0
7927 # POSIX real time signals feature test macro
7928 # This defines the POSIX feature test macro
7929 # that indicates that the POSIX real time signals
7932 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7933 # No options implement this inferface
7934 # This value cannot be modified here.
7937 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7938 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7941 # The following properties are affected by this value
7942 # interface CYGINT_POSIX_REALTIME_SIGNALS
7943 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7947 # Non-local jumps functionality
7949 cdl_component CYGPKG_ISO_SETJMP {
7950 # There is no associated value.
7954 # setjmp() / longjmp() implementations
7956 cdl_interface CYGINT_ISO_SETJMP {
7957 # No options implement this inferface
7958 # This value cannot be modified here.
7961 # Requires: 1 >= CYGINT_ISO_SETJMP
7962 # CYGINT_ISO_SETJMP == 0
7965 # The following properties are affected by this value
7966 # interface CYGINT_ISO_SETJMP
7967 # Requires: 1 >= CYGINT_ISO_SETJMP
7970 # setjmp() / longjmp() implementation header
7972 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7974 # No user value, uncomment the following line to provide one.
7976 # value_source default
7977 # Default value: 0 0
7980 # sigsetjmp() / siglongjmp() implementations
7982 cdl_interface CYGINT_ISO_SIGSETJMP {
7983 # No options implement this inferface
7984 # This value cannot be modified here.
7987 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7988 # CYGINT_ISO_SIGSETJMP == 0
7991 # The following properties are affected by this value
7992 # interface CYGINT_ISO_SIGSETJMP
7993 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7996 # sigsetjmp() / siglongjmp() implementation header
7998 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8000 # No user value, uncomment the following line to provide one.
8002 # value_source default
8003 # Default value: 0 0
8007 # Assertions implementation header
8009 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8011 # No user value, uncomment the following line to provide one.
8013 # value_source default
8014 # Default value: 0 0
8017 # POSIX file control
8018 # This covers the POSIX file control definitions,
8019 # normally found in <fcntl.h>
8021 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8022 # There is no associated value.
8026 # POSIX open flags implementation header
8028 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8030 # No user value, uncomment the following line to provide one.
8032 # value_source default
8033 # Default value: 0 0
8036 # POSIX fcntl() implementations
8038 cdl_interface CYGINT_ISO_FCNTL {
8039 # No options implement this inferface
8040 # This value cannot be modified here.
8043 # Requires: 1 >= CYGINT_ISO_FCNTL
8044 # CYGINT_ISO_FCNTL == 0
8047 # The following properties are affected by this value
8048 # interface CYGINT_ISO_FCNTL
8049 # Requires: 1 >= CYGINT_ISO_FCNTL
8052 # POSIX fcntl() implementation header
8054 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8056 # No user value, uncomment the following line to provide one.
8058 # value_source default
8059 # Default value: 0 0
8062 # POSIX file open implementations
8064 cdl_interface CYGINT_ISO_OPEN {
8065 # No options implement this inferface
8066 # This value cannot be modified here.
8069 # Requires: 1 >= CYGINT_ISO_OPEN
8070 # CYGINT_ISO_OPEN == 0
8073 # The following properties are affected by this value
8074 # interface CYGINT_ISO_OPEN
8075 # Requires: 1 >= CYGINT_ISO_OPEN
8078 # POSIX file open implementation header
8080 cdl_option CYGBLD_ISO_OPEN_HEADER {
8082 # No user value, uncomment the following line to provide one.
8084 # value_source default
8085 # Default value: 0 0
8089 # <sys/stat.h> definitions implementation header
8091 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8093 # No user value, uncomment the following line to provide one.
8095 # value_source default
8096 # Default value: 0 0
8099 # POSIX directory reading implementation
8101 cdl_interface CYGINT_ISO_DIRENT {
8102 # No options implement this inferface
8103 # This value cannot be modified here.
8106 # Requires: 1 >= CYGINT_ISO_DIRENT
8107 # CYGINT_ISO_DIRENT == 0
8110 # The following properties are affected by this value
8111 # interface CYGINT_ISO_DIRENT
8112 # Requires: 1 >= CYGINT_ISO_DIRENT
8115 # <dirent.h> definitions implementation header
8117 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8119 # No user value, uncomment the following line to provide one.
8121 # value_source default
8122 # Default value: 0 0
8125 # POSIX <sys/types.h> contents
8126 # This covers the types required by POSIX to be in
8129 cdl_component CYGPKG_ISO_POSIX_TYPES {
8130 # There is no associated value.
8134 # POSIX thread types implementations
8136 cdl_interface CYGINT_ISO_PTHREADTYPES {
8137 # No options implement this inferface
8138 # This value cannot be modified here.
8141 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8142 # CYGINT_ISO_PTHREADTYPES == 0
8145 # The following properties are affected by this value
8146 # interface CYGINT_ISO_PTHREADTYPES
8147 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8148 # interface CYGINT_ISO_PMUTEXTYPES
8149 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8152 # POSIX thread types implementation header
8154 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8156 # No user value, uncomment the following line to provide one.
8158 # value_source default
8159 # Default value: 0 0
8162 # POSIX mutex types implementations
8164 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8165 # No options implement this inferface
8166 # This value cannot be modified here.
8169 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8170 # CYGINT_ISO_PTHREADTYPES == 0
8174 # POSIX mutex types implementation header
8176 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8178 # No user value, uncomment the following line to provide one.
8180 # value_source default
8181 # Default value: 0 0
8184 # ssize_t implementation header
8186 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8188 # No user value, uncomment the following line to provide one.
8190 # value_source default
8191 # Default value: 0 0
8194 # Filesystem types implementation header
8196 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8198 # No user value, uncomment the following line to provide one.
8200 # value_source default
8201 # Default value: 0 0
8204 # gid_t, pid_t, uid_t implementation header
8206 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8208 # No user value, uncomment the following line to provide one.
8210 # value_source default
8211 # Default value: 0 0
8215 # Non-POSIX <sys/types.h> contents
8216 # This covers the extra types required by non-POSIX
8217 # packages to be in <sys/types.h>. These would normally
8218 # only be visible if _POSIX_SOURCE is not defined.
8220 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8221 # There is no associated value.
8225 # BSD compatible types
8227 cdl_interface CYGINT_ISO_BSDTYPES {
8228 # No options implement this inferface
8229 # This value cannot be modified here.
8232 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8233 # CYGINT_ISO_BSDTYPES == 0
8236 # The following properties are affected by this value
8237 # interface CYGINT_ISO_BSDTYPES
8238 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8243 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8245 # No user value, uncomment the following line to provide one.
8247 # value_source default
8248 # Default value: 0 0
8254 cdl_component CYGPKG_ISO_UTSNAME {
8255 # There is no associated value.
8261 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8263 # No user value, uncomment the following line to provide one.
8265 # value_source default
8266 # Default value: 0 0
8272 cdl_component CYGPKG_ISO_SCHED {
8273 # There is no associated value.
8277 # POSIX scheduler implementations
8279 cdl_interface CYGINT_ISO_SCHED_IMPL {
8280 # No options implement this inferface
8281 # This value cannot be modified here.
8284 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8285 # CYGINT_ISO_SCHED_IMPL == 0
8288 # The following properties are affected by this value
8289 # interface CYGINT_ISO_SCHED_IMPL
8290 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8293 # POSIX scheduler implementation header
8295 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8297 # No user value, uncomment the following line to provide one.
8299 # value_source default
8300 # Default value: 0 0
8306 cdl_component CYGPKG_ISO_SEMAPHORES {
8307 # There is no associated value.
8311 # POSIX semaphore implementations
8313 cdl_interface CYGINT_ISO_SEMAPHORES {
8314 # No options implement this inferface
8315 # This value cannot be modified here.
8318 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8319 # CYGINT_ISO_SEMAPHORES == 0
8322 # The following properties are affected by this value
8323 # interface CYGINT_ISO_SEMAPHORES
8324 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8327 # POSIX semaphore implementation header
8329 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8331 # No user value, uncomment the following line to provide one.
8333 # value_source default
8334 # Default value: 0 0
8338 # POSIX message queues
8340 cdl_component CYGPKG_ISO_MQUEUE {
8341 # There is no associated value.
8347 cdl_interface CYGINT_ISO_MQUEUE {
8348 # No options implement this inferface
8349 # This value cannot be modified here.
8352 # Requires: 1 >= CYGINT_ISO_MQUEUE
8353 # CYGINT_ISO_MQUEUE == 0
8356 # The following properties are affected by this value
8357 # interface CYGINT_ISO_MQUEUE
8358 # Requires: 1 >= CYGINT_ISO_MQUEUE
8359 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8360 # ActiveIf: CYGINT_ISO_MQUEUE
8361 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8362 # ActiveIf: CYGINT_ISO_MQUEUE
8365 # Implementation header
8367 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8369 # No user value, uncomment the following line to provide one.
8371 # value_source default
8372 # Default value: 0 0
8375 # Maximum number of open message queues
8377 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8378 # This option is not active
8379 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8380 # CYGINT_ISO_MQUEUE == 0
8384 # No user value, uncomment the following line to provide one.
8386 # value_source default
8387 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8388 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8389 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8393 # Maximum number of message priorities
8395 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8396 # This option is not active
8397 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8398 # CYGINT_ISO_MQUEUE == 0
8402 # No user value, uncomment the following line to provide one.
8403 # user_value 1 65535
8404 # value_source default
8405 # Default value: 1 65535
8411 cdl_component CYGPKG_ISO_PTHREAD {
8412 # There is no associated value.
8416 # POSIX pthread implementations
8418 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8419 # No options implement this inferface
8420 # This value cannot be modified here.
8422 # Current value: 0 0
8423 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8424 # CYGINT_ISO_PTHREAD_IMPL == 0
8427 # The following properties are affected by this value
8428 # interface CYGINT_ISO_PTHREAD_IMPL
8429 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8432 # POSIX pthread implementation header
8434 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8436 # No user value, uncomment the following line to provide one.
8438 # value_source default
8439 # Default value: 0 0
8442 # POSIX mutex/cond var implementations
8444 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8445 # No options implement this inferface
8446 # This value cannot be modified here.
8448 # Current value: 0 0
8449 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8450 # CYGINT_ISO_PTHREAD_MUTEX == 0
8453 # The following properties are affected by this value
8454 # interface CYGINT_ISO_PTHREAD_MUTEX
8455 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8458 # POSIX mutex/cond var implementation header
8460 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8462 # No user value, uncomment the following line to provide one.
8464 # value_source default
8465 # Default value: 0 0
8471 cdl_component CYGPKG_ISO_LIMITS {
8472 # There is no associated value.
8476 # POSIX pthread limits implementations
8478 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8479 # No options implement this inferface
8480 # This value cannot be modified here.
8483 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8484 # CYGINT_ISO_POSIX_LIMITS == 0
8487 # The following properties are affected by this value
8488 # interface CYGINT_ISO_POSIX_LIMITS
8489 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8492 # POSIX pthread limits implementation header
8494 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8496 # No user value, uncomment the following line to provide one.
8498 # value_source default
8499 # Default value: 0 0
8502 # OPEN_MAX implementation header
8504 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8506 # No user value, uncomment the following line to provide one.
8508 # value_source default
8509 # Default value: 0 0
8512 # LINK_MAX implementation header
8514 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8516 # No user value, uncomment the following line to provide one.
8518 # value_source default
8519 # Default value: 0 0
8522 # NAME_MAX implementation header
8524 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8526 # No user value, uncomment the following line to provide one.
8528 # value_source default
8529 # Default value: 0 0
8532 # PATH_MAX implementation header
8534 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8536 # No user value, uncomment the following line to provide one.
8538 # value_source default
8539 # Default value: 0 0
8545 cdl_component CYGPKG_ISO_TERMIOS {
8546 # There is no associated value.
8550 # POSIX termios implementations
8552 cdl_interface CYGINT_ISO_TERMIOS {
8553 # No options implement this inferface
8554 # This value cannot be modified here.
8557 # Requires: 1 >= CYGINT_ISO_TERMIOS
8558 # CYGINT_ISO_TERMIOS == 0
8561 # The following properties are affected by this value
8562 # interface CYGINT_ISO_TERMIOS
8563 # Requires: 1 >= CYGINT_ISO_TERMIOS
8566 # POSIX termios implementation header
8568 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8570 # No user value, uncomment the following line to provide one.
8572 # value_source default
8573 # Default value: 0 0
8579 cdl_component CYGPKG_ISO_DLFCN {
8580 # There is no associated value.
8584 # Dynamic load implementations
8586 cdl_interface CYGINT_ISO_DLFCN {
8587 # No options implement this inferface
8588 # This value cannot be modified here.
8591 # Requires: 1 >= CYGINT_ISO_DLFCN
8592 # CYGINT_ISO_DLFCN == 0
8595 # The following properties are affected by this value
8596 # interface CYGINT_ISO_DLFCN
8597 # Requires: 1 >= CYGINT_ISO_DLFCN
8600 # Dynamic load implementation header
8602 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8604 # No user value, uncomment the following line to provide one.
8606 # value_source default
8607 # Default value: 0 0
8611 # UNIX standard functions
8613 cdl_component CYGPKG_ISO_UNISTD {
8614 # There is no associated value.
8618 # POSIX timer operations implementations
8620 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8621 # No options implement this inferface
8622 # This value cannot be modified here.
8624 # Current value: 0 0
8625 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8626 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8629 # The following properties are affected by this value
8630 # interface CYGINT_ISO_POSIX_TIMER_OPS
8631 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8634 # POSIX timer operations implementation header
8636 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8638 # No user value, uncomment the following line to provide one.
8640 # value_source default
8641 # Default value: 0 0
8644 # POSIX sleep() implementations
8646 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8647 # No options implement this inferface
8648 # This value cannot be modified here.
8650 # Current value: 0 0
8651 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8652 # CYGINT_ISO_POSIX_SLEEP == 0
8655 # The following properties are affected by this value
8656 # interface CYGINT_ISO_POSIX_SLEEP
8657 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8660 # POSIX sleep() implementation header
8662 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8664 # No user value, uncomment the following line to provide one.
8666 # value_source default
8667 # Default value: 0 0
8671 # select()/poll() functions
8673 cdl_component CYGPKG_ISO_SELECT {
8674 # There is no associated value.
8678 # select() implementations
8680 cdl_interface CYGINT_ISO_SELECT {
8681 # No options implement this inferface
8682 # This value cannot be modified here.
8684 # Current value: 0 0
8685 # Requires: 1 >= CYGINT_ISO_SELECT
8686 # CYGINT_ISO_SELECT == 0
8689 # The following properties are affected by this value
8690 # interface CYGINT_ISO_SELECT
8691 # Requires: 1 >= CYGINT_ISO_SELECT
8694 # select() implementation header
8696 cdl_option CYGBLD_ISO_SELECT_HEADER {
8698 # No user value, uncomment the following line to provide one.
8700 # value_source default
8701 # Default value: 0 0
8704 # poll() implementations
8706 cdl_interface CYGINT_ISO_POLL {
8707 # No options implement this inferface
8708 # This value cannot be modified here.
8710 # Current value: 0 0
8711 # Requires: 1 >= CYGINT_ISO_POLL
8712 # CYGINT_ISO_POLL == 0
8715 # The following properties are affected by this value
8716 # interface CYGINT_ISO_POLL
8717 # Requires: 1 >= CYGINT_ISO_POLL
8720 # poll() implementation header
8722 cdl_option CYGBLD_ISO_POLL_HEADER {
8724 # No user value, uncomment the following line to provide one.
8726 # value_source default
8727 # Default value: 0 0
8731 # NetDB utility functions
8733 cdl_component CYGPKG_ISO_NETDB {
8734 # There is no associated value.
8738 # DNS implementations
8740 cdl_interface CYGINT_ISO_DNS {
8741 # No options implement this inferface
8742 # This value cannot be modified here.
8745 # Requires: 1 >= CYGINT_ISO_DNS
8746 # CYGINT_ISO_DNS == 0
8749 # The following properties are affected by this value
8750 # interface CYGINT_ISO_DNS
8751 # Requires: 1 >= CYGINT_ISO_DNS
8754 # DNS implementation header
8756 cdl_option CYGBLD_ISO_DNS_HEADER {
8758 # No user value, uncomment the following line to provide one.
8760 # value_source default
8761 # Default value: 0 0
8764 # Protocol network database implementations
8766 cdl_interface CYGINT_ISO_NETDB_PROTO {
8767 # No options implement this inferface
8768 # This value cannot be modified here.
8771 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8772 # CYGINT_ISO_NETDB_PROTO == 0
8775 # The following properties are affected by this value
8776 # interface CYGINT_ISO_NETDB_PROTO
8777 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8780 # Protocol network database implementation header
8782 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8784 # No user value, uncomment the following line to provide one.
8786 # value_source default
8787 # Default value: 0 0
8790 # Services network database implementations
8792 cdl_interface CYGINT_ISO_NETDB_SERV {
8793 # No options implement this inferface
8794 # This value cannot be modified here.
8797 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8798 # CYGINT_ISO_NETDB_SERV == 0
8801 # The following properties are affected by this value
8802 # interface CYGINT_ISO_NETDB_SERV
8803 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8806 # Services network database implementation header
8808 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8810 # No user value, uncomment the following line to provide one.
8812 # value_source default
8813 # Default value: 0 0
8818 # Package specific build options including control over
8819 # compiler flags used only in building this package,
8820 # and details of which tests are built.
8822 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8823 # There is no associated value.
8827 # Additional compiler flags
8828 # This option modifies the set of compiler flags for
8829 # building the ISO C and POSIX infrastructure package.
8830 # These flags are used in addition to the set of global flags.
8832 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8834 # No user value, uncomment the following line to provide one.
8836 # value_source default
8840 # Suppressed compiler flags
8841 # This option modifies the set of compiler flags for
8842 # building the ISO C and POSIX infrastructure package.
8843 # These flags are removed from the set of global flags
8846 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8848 # No user value, uncomment the following line to provide one.
8850 # value_source default
8857 # doc: ref/services-crc.html
8858 # This package provides support for CRC calculation. Currently
8859 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8860 # Gary S. Brown, and a 16 bit CRC.
8862 cdl_package CYGPKG_CRC {
8863 # Packages cannot be added or removed, nor can their version be changed,
8864 # simply by editing their value. Instead the appropriate configuration
8865 # should be used to perform these actions.
8867 # This value cannot be modified here.
8869 # Current value: 1 current
8871 # The following properties are affected by this value
8872 # package CYGPKG_COMPRESS_ZLIB
8873 # Requires: CYGPKG_CRC
8879 cdl_option CYGPKG_CRC_TESTS {
8880 # Calculated value: "tests/crc_test"
8882 # Current_value: tests/crc_test
8886 # Zlib compress and decompress package
8887 # This package provides support for compression and
8890 cdl_package CYGPKG_COMPRESS_ZLIB {
8891 # Packages cannot be added or removed, nor can their version be changed,
8892 # simply by editing their value. Instead the appropriate configuration
8893 # should be used to perform these actions.
8895 # This value cannot be modified here.
8897 # Current value: 1 current
8898 # Requires: CYGPKG_ISOINFRA
8899 # CYGPKG_ISOINFRA == current
8901 # Requires: CYGPKG_CRC
8902 # CYGPKG_CRC == current
8905 # The following properties are affected by this value
8906 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8907 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8911 # Override memory allocation routines.
8913 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8914 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8915 # This value cannot be modified here.
8919 # The following properties are affected by this value
8920 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8921 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8924 # Should deflate() produce 'gzip' compatible output?
8925 # If this option is set then the output of calling deflate()
8926 # will be wrapped up as a 'gzip' compatible file.
8928 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8930 # No user value, uncomment the following line to provide one.
8932 # value_source default
8936 # Does this library need malloc?
8937 # This pseudo-option will force the memalloc library to be
8938 # required iff the application does not provide it's own
8941 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8942 # This option is not active
8943 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8944 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8948 # No user value, uncomment the following line to provide one.
8950 # value_source default
8952 # Requires: CYGPKG_MEMALLOC
8953 # CYGPKG_MEMALLOC == current
8957 # Include stdio-like utility functions
8958 # This option enables the stdio-like zlib utility functions
8959 # (gzread/gzwrite and friends) provided in gzio.c.
8961 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8963 # No user value, uncomment the following line to provide one.
8965 # value_source default
8966 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8967 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8969 # Requires: CYGINT_ISO_STDIO_FILEPOS
8970 # CYGINT_ISO_STDIO_FILEPOS == 0
8972 # Requires: CYGINT_ISO_STRING_STRFUNCS
8973 # CYGINT_ISO_STRING_STRFUNCS == 1
8975 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8976 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8978 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8979 # CYGINT_ISO_STDIO_FILEACCESS == 0
8983 # Zlib compress and decompress package build options
8984 # Package specific build options including control over
8985 # compiler flags used only in building this package,
8986 # and details of which tests are built.
8988 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8989 # There is no associated value.
8993 # Additional compiler flags
8994 # This option modifies the set of compiler flags for
8995 # building this package. These flags are used in addition
8996 # to the set of global flags.
8998 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9000 # No user value, uncomment the following line to provide one.
9001 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9002 # value_source default
9003 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9006 # Suppressed compiler flags
9007 # This option modifies the set of compiler flags for
9008 # building this package. These flags are removed from
9009 # the set of global flags if present.
9011 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9013 # No user value, uncomment the following line to provide one.
9014 # user_value -Wstrict-prototypes
9015 # value_source default
9016 # Default value: -Wstrict-prototypes
9019 # Additional compiler flags
9020 # This option modifies the set of compiler flags for
9021 # building this package. These flags are used in addition
9022 # to the set of global flags.
9024 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9026 # No user value, uncomment the following line to provide one.
9028 # value_source default
9032 # Suppressed compiler flags
9033 # This option modifies the set of compiler flags for
9034 # building this package. These flags are removed from
9035 # the set of global flags if present.
9037 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9039 # No user value, uncomment the following line to provide one.
9041 # value_source default
9048 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9049 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9051 # Current_value: tests/zlib1.c tests/zlib2.c
9055 # FLASH device drivers
9056 # doc: ref/flash.html
9057 # This option enables drivers for basic I/O services on
9060 cdl_package CYGPKG_IO_FLASH {
9061 # Packages cannot be added or removed, nor can their version be changed,
9062 # simply by editing their value. Instead the appropriate configuration
9063 # should be used to perform these actions.
9065 # This value cannot be modified here.
9067 # Current value: 1 current
9068 # Requires: CYGPKG_ISOINFRA
9069 # CYGPKG_ISOINFRA == current
9071 # Requires: CYGINT_ISO_STRING_STRFUNCS
9072 # CYGINT_ISO_STRING_STRFUNCS == 1
9075 # The following properties are affected by this value
9076 # component CYGSEM_REDBOOT_FLASH_CONFIG
9077 # DefaultValue: CYGPKG_IO_FLASH != 0
9078 # package CYGPKG_DEVS_FLASH_ONMXC
9079 # ActiveIf: CYGPKG_IO_FLASH
9083 # Hardware FLASH device drivers
9084 # This option enables the hardware device drivers
9085 # for the current platform.
9087 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9088 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9089 # This value cannot be modified here.
9093 # The following properties are affected by this value
9094 # component CYGPKG_REDBOOT_FLASH
9095 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9098 # Hardware FLASH device drivers are not in RAM
9099 # Use of this interface is deprecated.
9100 # Drivers should make sure that the functions are
9101 # linked to RAM by putting them in .2ram sections.
9103 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9104 # No options implement this inferface
9105 # This value cannot be modified here.
9107 # Current value: 0 0
9108 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9109 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9112 # The following properties are affected by this value
9113 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9114 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9117 # Hardware can support block locking
9118 # This option will be enabled by devices which can support
9119 # locking (write-protection) of individual blocks.
9121 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9122 # No options implement this inferface
9123 # This value cannot be modified here.
9125 # Current value: 0 0
9127 # The following properties are affected by this value
9128 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9129 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9132 # Hardware cannot support direct access to FLASH memory
9133 # This option will be asserted by devices which cannot support
9134 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9135 # devices). In these cases, the driver must provide an appropriate
9136 # hardware access function.
9138 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9140 # No user value, uncomment the following line to provide one.
9142 # The inferred value should not be edited directly.
9144 # value_source inferred
9146 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9147 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9150 # The following properties are affected by this value
9151 # option CYGPRI_REDBOOT_ZLIB_FLASH
9152 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9153 # component CYGHWR_DEVS_FLASH_MMC
9154 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9155 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9156 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9157 # option CYGHWR_DEVS_FLASH_MMC_SD
9158 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9159 # option CYGHWR_DEVS_FLASH_MXC_NAND
9160 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9163 # Display status messages during flash operations
9164 # Selecting this option will cause the drivers to print status
9165 # messages as various flash operations are undertaken.
9167 cdl_option CYGSEM_IO_FLASH_CHATTER {
9169 # No user value, uncomment the following line to provide one.
9171 # value_source default
9175 # Verify data programmed to flash
9176 # Selecting this option will cause verification of data
9177 # programmed to flash.
9179 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9181 # No user value, uncomment the following line to provide one.
9183 # The inferred value should not be edited directly.
9185 # value_source inferred
9188 # The following properties are affected by this value
9189 # option CYGSEM_IO_FLASH_READ_INDIRECT
9190 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9193 # Platform has flash soft DIP switch write-protect
9194 # Selecting this option will cause the state of a hardware jumper or
9195 # dipswitch to be read by software to determine whether the flash is
9196 # write-protected or not.
9198 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9200 # No user value, uncomment the following line to provide one.
9202 # value_source default
9206 # Instantiate in I/O block device API
9207 # Provides a block device accessible using the standard I/O
9208 # API ( cyg_io_read() etc. )
9210 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9211 # This option is not active
9212 # ActiveIf constraint: CYGPKG_IO
9213 # CYGPKG_IO (unknown) == 0
9217 # No user value, uncomment the following line to provide one.
9219 # value_source default
9224 # Name of flash device 1 block device
9226 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9227 # This option is not active
9228 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9229 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9232 # No user value, uncomment the following line to provide one.
9233 # user_value "\"/dev/flash1\""
9234 # value_source default
9235 # Default value: "\"/dev/flash1\""
9240 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9241 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9242 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9243 # This option is not active
9244 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9246 # This value cannot be modified here.
9249 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9250 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9253 # The following properties are affected by this value
9254 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9255 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9258 # Static configuration
9259 # This configures the flash device 1 block device
9260 # with static base and length
9262 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9263 # This option is not active
9264 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9267 # No user value, uncomment the following line to provide one.
9269 # value_source default
9274 # Start offset from flash base
9275 # This gives the offset from the base of flash which this
9276 # block device corresponds to.
9278 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9279 # This option is not active
9280 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9283 # No user value, uncomment the following line to provide one.
9284 # user_value 0x00100000
9285 # value_source default
9286 # Default value: 0x00100000
9290 # This gives the length of the region of flash given over
9291 # to this block device.
9293 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9294 # This option is not active
9295 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9298 # No user value, uncomment the following line to provide one.
9299 # user_value 0x00100000
9300 # value_source default
9301 # Default value: 0x00100000
9305 # Configuration from FIS
9306 # This configures the flash device 1 block device
9309 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9310 # This option is not active
9311 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9314 # No user value, uncomment the following line to provide one.
9316 # value_source default
9323 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9324 # This option is not active
9325 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9326 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9329 # No user value, uncomment the following line to provide one.
9330 # user_value "\"jffs2\""
9331 # value_source default
9332 # Default value: "\"jffs2\""
9338 # Flash device driver build options
9339 # Package specific build options including control over
9340 # compiler flags used only in building this package,
9341 # and details of which tests are built.
9343 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9344 # There is no associated value.
9348 # Additional compiler flags
9349 # This option modifies the set of compiler flags for
9350 # building the flash device drivers. These flags are used in addition
9351 # to the set of global flags.
9353 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9355 # No user value, uncomment the following line to provide one.
9357 # value_source default
9361 # Suppressed compiler flags
9362 # This option modifies the set of compiler flags for
9363 # building the flash device drivers. These flags are removed from
9364 # the set of global flags if present.
9366 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9368 # No user value, uncomment the following line to provide one.
9370 # value_source default
9374 # Flash device driver tests
9375 # This option specifies the set of tests for the flash device drivers.
9377 cdl_component CYGPKG_IO_FLASH_TESTS {
9378 # Calculated value: "tests/flash1"
9380 # Current_value: tests/flash1
9384 # Start offset from flash base
9385 # This gives the offset from the base of flash where tests
9386 # can be run. It is important to set this correctly, as an
9387 # incorrect value could allow the tests to write over critical
9388 # portions of the FLASH device and possibly render the target
9389 # board totally non-functional.
9391 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9393 # No user value, uncomment the following line to provide one.
9394 # user_value 0x00100000
9395 # value_source default
9396 # Default value: 0x00100000
9400 # This gives the length of the region of flash used for testing.
9402 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9404 # No user value, uncomment the following line to provide one.
9405 # user_value 0x00100000
9406 # value_source default
9407 # Default value: 0x00100000
9412 # Support FLASH memory on Freescale MXC platforms
9414 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9415 # Packages cannot be added or removed, nor can their version be changed,
9416 # simply by editing their value. Instead the appropriate configuration
9417 # should be used to perform these actions.
9419 # ActiveIf constraint: CYGPKG_IO_FLASH
9420 # CYGPKG_IO_FLASH == current
9423 # This value cannot be modified here.
9425 # Current value: 1 current
9429 # MXC platform MMC card support
9430 # When this option is enabled, it indicates MMC card is
9431 # supported on the MXC platforms
9433 cdl_component CYGHWR_DEVS_FLASH_MMC {
9435 # No user value, uncomment the following line to provide one.
9437 # value_source default
9439 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9440 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9443 # The following properties are affected by this value
9444 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9445 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9446 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9447 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9448 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9449 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9450 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9451 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9455 # MXC platform MMC card for newer SDHC controllers
9457 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9458 # This option is not active
9459 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9460 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9461 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9462 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9463 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9464 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9465 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9466 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
9470 # No user value, uncomment the following line to provide one.
9472 # value_source default
9474 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9475 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9479 # MXC platform MMC card for older MMC/SD controllers
9481 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9482 # This option is not active
9483 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9484 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9485 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9486 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9490 # No user value, uncomment the following line to provide one.
9492 # value_source default
9494 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9495 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9500 # MXC platform NOR flash memory support
9501 # When this option is enabled, it indicates NOR flash is
9502 # supported on the MXC platforms
9504 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9506 # No user value, uncomment the following line to provide one.
9508 # The inferred value should not be edited directly.
9510 # value_source inferred
9513 # The following properties are affected by this value
9514 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9515 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9516 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9517 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9518 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9519 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9520 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9521 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9522 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9523 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9526 # MXC platform NAND flash memory support
9527 # When this option is enabled, it indicates NAND flash is
9528 # supported on the MXC platforms
9530 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9532 # No user value, uncomment the following line to provide one.
9534 # The inferred value should not be edited directly.
9536 # value_source inferred
9538 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9539 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9542 # The following properties are affected by this value
9543 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9544 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9545 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9546 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9547 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9548 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9549 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9550 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9551 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9552 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9553 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9554 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9557 # i.MX platform SPI NOR flash memory support
9558 # When this option is enabled, it indicates SPI NOR flash is
9559 # supported on the i.MX platforms
9561 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9563 # No user value, uncomment the following line to provide one.
9565 # value_source default
9567 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9568 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9572 # MXC platform ATA support
9573 # When this option is enabled, it indicates ATA is
9574 # supported on the MXC platforms
9576 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9578 # No user value, uncomment the following line to provide one.
9580 # value_source default
9584 # Use a flash based Bad Block Table
9586 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9587 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9588 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9591 # There is no associated value.
9595 # When this option is enabled, the driver will search for a flash
9596 # based bad block table
9598 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9600 # No user value, uncomment the following line to provide one.
9602 # value_source default
9606 # header file defining the NAND BBT descriptor
9607 # defines the name of the header file that describes the BBT layout
9609 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9611 # No user value, uncomment the following line to provide one.
9613 # The inferred value should not be edited directly.
9614 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9615 # value_source inferred
9616 # Default value: 0 0
9619 # Number of blocks to reserve for BBT
9620 # Number of blocks to reserve for BBT
9622 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9624 # No user value, uncomment the following line to provide one.
9626 # value_source default
9631 # MXC platform multi flash memory support
9632 # When this option is enabled, it indicates multi flashes are
9633 # supported on the MXC platforms (like NAND and NOR)
9635 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9636 # This option is not active
9637 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9638 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9639 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9640 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9641 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9642 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9643 # CYGHWR_DEVS_FLASH_MMC == 0
9644 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9645 # CYGHWR_DEVS_FLASH_MMC == 0
9649 # No user value, uncomment the following line to provide one.
9651 # The inferred value should not be edited directly.
9653 # value_source inferred
9657 # MXC platform NAND flash reset workaround support
9658 # When this option is enabled, it indicates 0xFFFF is used for
9659 # the NAND reset command instead of 0xFF.
9661 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9662 # No options implement this inferface
9663 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9664 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9667 # This value cannot be modified here.
9674 # Dynamic memory allocation
9675 # doc: ref/memalloc.html
9676 # This package provides memory allocator infrastructure required for
9677 # dynamic memory allocators, including the ISO standard malloc
9678 # interface. It also contains some sample implementations.
9680 cdl_package CYGPKG_MEMALLOC {
9681 # Packages cannot be added or removed, nor can their version be changed,
9682 # simply by editing their value. Instead the appropriate configuration
9683 # should be used to perform these actions.
9685 # This value cannot be modified here.
9687 # Current value: 1 current
9689 # The following properties are affected by this value
9690 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9691 # Requires: CYGPKG_MEMALLOC
9695 # Memory allocator implementations
9696 # This component contains configuration options related to the
9697 # various memory allocators available.
9699 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9700 # There is no associated value.
9704 # Fixed block allocator
9705 # This component contains configuration options related to the
9706 # fixed block memory allocator.
9708 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9709 # There is no associated value.
9714 # With this option enabled, this allocator will be
9715 # made thread-safe. Additionally allocation functions
9716 # are made available that allow a thread to wait
9717 # until memory is available.
9719 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9720 # This option is not active
9721 # ActiveIf constraint: CYGPKG_KERNEL
9722 # CYGPKG_KERNEL (unknown) == 0
9726 # No user value, uncomment the following line to provide one.
9728 # value_source default
9733 # Simple variable block allocator
9734 # This component contains configuration options related to the
9735 # simple variable block memory allocator. This allocator is not
9736 # very fast, and in particular does not scale well with large
9737 # numbers of allocations. It is however very compact in terms of
9738 # code size and does not have very much overhead per allocation.
9740 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9741 # There is no associated value.
9746 # With this option enabled, this allocator will be
9747 # made thread-safe. Additionally allocation functions
9748 # are added that allow a thread to wait until memory
9749 # are made available that allow a thread to wait
9750 # until memory is available.
9752 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9753 # This option is not active
9754 # ActiveIf constraint: CYGPKG_KERNEL
9755 # CYGPKG_KERNEL (unknown) == 0
9759 # No user value, uncomment the following line to provide one.
9761 # value_source default
9766 # The variable-block memory allocator can perform coalescing
9767 # of memory whenever the application code releases memory back
9768 # to the pool. This coalescing reduces the possibility of
9769 # memory fragmentation problems, but involves extra code and
9772 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9774 # No user value, uncomment the following line to provide one.
9776 # value_source default
9779 # The following properties are affected by this value
9780 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9781 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9786 # This component contains configuration options related to the
9787 # port of Doug Lea's memory allocator, normally known as
9788 # dlmalloc. dlmalloc has a reputation for being both fast
9789 # and space-conserving, as well as resisting fragmentation well.
9790 # It is a common choice for a general purpose allocator and
9791 # has been used in both newlib and Linux glibc.
9793 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9794 # There is no associated value.
9799 # Doug Lea's malloc implementation has substantial amounts
9800 # of internal checking in order to verify the operation
9801 # and consistency of the allocator. However this imposes
9802 # substantial overhead on each operation. Therefore this
9803 # checking may be individually disabled.
9805 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9807 # No user value, uncomment the following line to provide one.
9809 # value_source default
9810 # Default value: 0 != CYGDBG_USE_ASSERTS
9811 # CYGDBG_USE_ASSERTS == 0
9813 # Requires: CYGDBG_USE_ASSERTS
9814 # CYGDBG_USE_ASSERTS == 0
9819 # With this option enabled, this allocator will be
9820 # made thread-safe. Additionally allocation functions
9821 # are made available that allow a thread to wait
9822 # until memory is available.
9824 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9825 # This option is not active
9826 # ActiveIf constraint: CYGPKG_KERNEL
9827 # CYGPKG_KERNEL (unknown) == 0
9831 # No user value, uncomment the following line to provide one.
9833 # value_source default
9835 # Requires: CYGPKG_KERNEL
9836 # CYGPKG_KERNEL (unknown) == 0
9840 # Support more than one instance
9841 # Having this option disabled allows important
9842 # implementation structures to be declared as a single
9843 # static instance, allowing faster access. However this
9844 # would fail if there is more than one instance of
9845 # the dlmalloc allocator class. Therefore this option can
9846 # be enabled if multiple instances are required. Note: as
9847 # a special case, if this allocator is used as the
9848 # implementation of malloc, and it can be determined there
9849 # is more than one malloc pool, then this option will be
9852 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9854 # No user value, uncomment the following line to provide one.
9856 # value_source default
9860 # Use system memmove() and memset()
9861 # This may be used to control whether memset() and memmove()
9862 # are used within the implementation. The alternative is
9863 # to use some macro equivalents, which some people report
9864 # are faster in some circumstances.
9866 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9868 # No user value, uncomment the following line to provide one.
9870 # value_source default
9871 # Default value: 0 != CYGPKG_ISOINFRA
9872 # CYGPKG_ISOINFRA == current
9874 # Requires: CYGPKG_ISOINFRA
9875 # CYGPKG_ISOINFRA == current
9879 # Minimum alignment of allocated blocks
9880 # This option controls the minimum alignment that the
9881 # allocated memory blocks are aligned on, specified as
9882 # 2^N. Note that using large mininum alignments can lead
9883 # to excessive memory wastage.
9885 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9887 # No user value, uncomment the following line to provide one.
9889 # value_source default
9891 # Legal values: 3 to 10
9895 # Variable block allocator with separate metadata
9896 # This component contains configuration options related to the
9897 # variable block memory allocator with separate metadata.
9899 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9900 # There is no associated value.
9905 # With this option enabled, this allocator will be
9906 # made thread-safe. Additionally allocation functions
9907 # are made available that allow a thread to wait
9908 # until memory is available.
9910 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9911 # This option is not active
9912 # ActiveIf constraint: CYGPKG_KERNEL
9913 # CYGPKG_KERNEL (unknown) == 0
9917 # No user value, uncomment the following line to provide one.
9919 # value_source default
9925 # Kernel C API support for memory allocation
9926 # This option must be enabled to provide the extensions required
9927 # to support integration into the kernel C API.
9929 cdl_option CYGFUN_MEMALLOC_KAPI {
9930 # This option is not active
9931 # ActiveIf constraint: CYGPKG_KERNEL
9932 # CYGPKG_KERNEL (unknown) == 0
9936 # No user value, uncomment the following line to provide one.
9938 # value_source default
9939 # Default value: CYGFUN_KERNEL_API_C
9940 # CYGFUN_KERNEL_API_C (unknown) == 0
9944 # malloc(0) returns NULL
9945 # This option controls the behavior of malloc(0) ( or calloc with
9946 # either argument 0 ). It is permitted by the standard to return
9947 # either a NULL pointer or a unique pointer. Enabling this option
9948 # forces a NULL pointer to be returned.
9950 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9952 # No user value, uncomment the following line to provide one.
9954 # value_source default
9958 # Breakpoint site when running out of memory
9959 # Whenever the system runs out of memory, it invokes this function
9960 # before either going to sleep waiting for memory to become
9961 # available or returning failure.
9963 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9965 # No user value, uncomment the following line to provide one.
9967 # value_source default
9971 # malloc() and supporting allocators
9972 # This component enables support for dynamic memory
9973 # allocation as supplied by the functions malloc(),
9974 # free(), calloc() and realloc(). As these
9975 # functions are often used, but can have quite an
9976 # overhead, disabling them here can ensure they
9977 # cannot even be used accidentally when static
9978 # allocation is preferred. Within this component are
9979 # various allocators that can be selected for use
9980 # as the underlying implementation of the dynamic
9981 # allocation functions.
9983 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9984 # ActiveIf constraint: CYGPKG_ISOINFRA
9985 # CYGPKG_ISOINFRA == current
9989 # No user value, uncomment the following line to provide one.
9991 # value_source default
9996 # Use external heap definition
9997 # This option allows other components in the
9998 # system to override the default system
9999 # provision of heap memory pools. This should
10000 # be set to a header which provides the equivalent
10001 # definitions to <pkgconf/heaps.hxx>.
10003 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10005 # No user value, uncomment the following line to provide one.
10007 # value_source default
10008 # Default value: 0 0
10011 # Use external implementation of joining multiple heaps
10012 # The default implementation of joining multiple heaps
10013 # is fine for the case where there are multiple disjoint
10014 # memory regions of the same type. However, in a system
10015 # there might be e.g. a small amount of internal SRAM and
10016 # a large amount of external DRAM. The SRAM is faster and
10017 # the DRAM is slower. An application can implement some
10018 # heuristic to choose which pool to allocate from. This
10019 # heuristic can be highly application specific.
10021 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10023 # No user value, uncomment the following line to provide one.
10025 # value_source default
10026 # Default value: 0 0
10029 # malloc() allocator implementations
10031 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10032 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10033 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10034 # This value cannot be modified here.
10037 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10038 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10041 # The following properties are affected by this value
10042 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10043 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10046 # malloc() implementation instantiation data
10047 # Memory allocator implementations that are capable of being
10048 # used underneath malloc() must be instantiated. The code
10049 # to do this is set in this option. It is only intended to
10050 # be set by the implementation, not the user.
10052 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10054 # No user value, uncomment the following line to provide one.
10055 # user_value <cyg/memalloc/dlmalloc.hxx>
10056 # value_source default
10057 # Default value: <cyg/memalloc/dlmalloc.hxx>
10059 # The following properties are affected by this value
10060 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10061 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10062 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10063 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10066 # Simple variable block implementation
10067 # This causes malloc() to use the simple
10068 # variable block allocator.
10070 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10072 # No user value, uncomment the following line to provide one.
10074 # value_source default
10076 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10077 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10079 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10080 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10084 # Doug Lea's malloc implementation
10085 # This causes malloc() to use a version of Doug Lea's
10086 # malloc (dlmalloc) as the underlying implementation.
10088 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10090 # No user value, uncomment the following line to provide one.
10092 # value_source default
10094 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10095 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10100 # Size of the fallback dynamic memory pool in bytes
10101 # If *no* heaps are configured in your memory layout,
10102 # dynamic memory allocation by
10103 # malloc() and calloc() must be from a fixed-size,
10104 # contiguous memory pool (note here that it is the
10105 # pool that is of a fixed size, but malloc() is still
10106 # able to allocate variable sized chunks of memory
10107 # from it). This option is the size
10108 # of that pool, in bytes. Note that not all of
10109 # this is available for programs to
10110 # use - some is needed for internal information
10111 # about memory regions, and some may be lost to
10112 # ensure that memory allocation only returns
10113 # memory aligned on word (or double word)
10114 # boundaries - a very common architecture
10117 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10119 # No user value, uncomment the following line to provide one.
10121 # value_source default
10122 # Default value: 16384
10123 # Legal values: 32 to 0x7fffffff
10126 # Common memory allocator package build options
10127 # Package specific build options including control over
10128 # compiler flags used only in building this package,
10129 # and details of which tests are built.
10131 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10132 # There is no associated value.
10136 # Additional compiler flags
10137 # This option modifies the set of compiler flags for
10138 # building this package. These flags are used in addition
10139 # to the set of global flags.
10141 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10143 # No user value, uncomment the following line to provide one.
10144 # user_value "-fno-rtti -Woverloaded-virtual"
10145 # value_source default
10146 # Default value: "-fno-rtti -Woverloaded-virtual"
10149 # Suppressed compiler flags
10150 # This option modifies the set of compiler flags for
10151 # building this package. These flags are removed from
10152 # the set of global flags if present.
10154 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10156 # No user value, uncomment the following line to provide one.
10157 # user_value -Wno-pointer-sign
10158 # value_source default
10159 # Default value: -Wno-pointer-sign
10163 # This option specifies the set of tests for this package.
10165 cdl_option CYGPKG_MEMALLOC_TESTS {
10166 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10168 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10173 # Common error code support
10174 # This package contains the common list of error and
10175 # status codes. It is held centrally to allow
10176 # packages to interchange error codes and status
10177 # codes in a common way, rather than each package
10178 # having its own conventions for error/status
10179 # reporting. The error codes are modelled on the
10180 # POSIX style naming e.g. EINVAL etc. This package
10181 # also provides the standard strerror() function to
10182 # convert error codes to textual representation, as
10183 # well as an implementation of the errno idiom.
10185 cdl_package CYGPKG_ERROR {
10186 # Packages cannot be added or removed, nor can their version be changed,
10187 # simply by editing their value. Instead the appropriate configuration
10188 # should be used to perform these actions.
10190 # This value cannot be modified here.
10192 # Current value: 1 current
10193 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10194 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10200 # This package controls the behaviour of the
10201 # errno variable (or more strictly, expression)
10204 cdl_component CYGPKG_ERROR_ERRNO {
10206 # No user value, uncomment the following line to provide one.
10208 # value_source default
10210 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10211 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10217 # This option controls whether the standard error
10218 # code reporting variable errno is a per-thread
10219 # variable, rather than global.
10221 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10223 # No user value, uncomment the following line to provide one.
10225 # The inferred value should not be edited directly.
10227 # value_source inferred
10229 # Requires: CYGVAR_KERNEL_THREADS_DATA
10230 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10235 # Trace verbosity level for debugging the errno
10236 # retrieval mechanism in errno.cxx. Increase this
10237 # value to get additional trace output.
10239 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10241 # No user value, uncomment the following line to provide one.
10243 # value_source default
10245 # Legal values: 0 to 1
10249 # strerror function
10250 # This package controls the presence and behaviour of the
10251 # strerror() function from <string.h>
10253 cdl_option CYGPKG_ERROR_STRERROR {
10255 # No user value, uncomment the following line to provide one.
10257 # value_source default
10259 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10260 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10264 # Error package build options
10265 # Package specific build options including control over
10266 # compiler flags used only in building this package,
10267 # and details of which tests are built.
10269 cdl_component CYGPKG_ERROR_OPTIONS {
10270 # There is no associated value.
10274 # Additional compiler flags
10275 # This option modifies the set of compiler flags for
10276 # building the error package. These flags are used in addition
10277 # to the set of global flags.
10279 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10281 # No user value, uncomment the following line to provide one.
10283 # value_source default
10284 # Default value: ""
10287 # Suppressed compiler flags
10288 # This option modifies the set of compiler flags for
10289 # building the error package. These flags are removed from
10290 # the set of global flags if present.
10292 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10294 # No user value, uncomment the following line to provide one.
10296 # value_source default
10297 # Default value: ""