1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX37 current ;
34 package -hardware CYGPKG_HAL_ARM_TX37KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX37 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-1136jfs-linux-gnu
79 # value_source default
80 # Default value: arm-1136jfs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # value_source default
93 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
95 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
98 # The following properties are affected by this value
99 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
100 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
101 # option CYGBLD_INFRA_CFLAGS_PIPE
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
105 # Global linker flags
106 # This option controls the global linker flags. Individual
107 # packages may define options which override these global flags.
109 cdl_option CYGBLD_GLOBAL_LDFLAGS {
111 # No user value, uncomment the following line to provide one.
112 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
113 # value_source default
114 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
117 # Build common GDB stub ROM image
118 # Unless a target board has specific requirements to the
119 # stub implementation, it can use a simple common stub.
120 # This option, which gets enabled by platform HALs as
121 # appropriate, controls the building of the common stub.
123 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
125 # No user value, uncomment the following line to provide one.
127 # value_source default
129 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
130 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
135 # ISO C library string functions
137 # This package provides string functions specified by the
138 # ISO C standard - ISO/IEC 9899:1990.
140 cdl_package CYGPKG_LIBC_STRING {
141 # Packages cannot be added or removed, nor can their version be changed,
142 # simply by editing their value. Instead the appropriate configuration
143 # should be used to perform these actions.
145 # This value cannot be modified here.
147 # Current value: 1 current
148 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
149 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
151 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
152 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
154 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
155 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
157 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
158 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
160 # Requires: CYGPKG_ISOINFRA
161 # CYGPKG_ISOINFRA == current
166 # Inline versions of <string.h> functions
167 # This option chooses whether some of the
168 # particularly simple string functions from
169 # <string.h> are available as inline
170 # functions. This may improve performance, and as
171 # the functions are small, may even improve code
174 cdl_option CYGIMP_LIBC_STRING_INLINES {
176 # No user value, uncomment the following line to provide one.
178 # value_source default
182 # Optimize string functions for code size
183 # This option tries to reduce string function
184 # code size at the expense of execution speed. The
185 # same effect can be produced if the code is
186 # compiled with the -Os option to the compiler.
188 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
190 # No user value, uncomment the following line to provide one.
192 # value_source default
196 # Provide BSD compatibility functions
197 # Enabling this option causes various compatibility functions
198 # commonly found in the BSD UNIX operating system to be included.
199 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
200 # strncasecmp, index, rindex and swab.
202 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
204 # No user value, uncomment the following line to provide one.
206 # The inferred value should not be edited directly.
208 # value_source inferred
210 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
211 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
213 # Requires: CYGINT_ISO_CTYPE
214 # CYGINT_ISO_CTYPE == 1
219 # These options control the behaviour of the
220 # strtok() and strtok_r() string tokenization
223 cdl_component CYGPKG_LIBC_STRING_STRTOK {
224 # There is no associated value.
228 # Per-thread strtok()
229 # This option controls whether the string function
230 # strtok() has its state recorded on a per-thread
231 # basis rather than global. If this option is
232 # disabled, some per-thread space can be saved.
233 # Note there is also a POSIX-standard strtok_r()
234 # function to achieve a similar effect with user
235 # support. Enabling this option will use one slot
236 # of kernel per-thread data. You should ensure you
237 # have enough slots configured for all your
240 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
241 # This option is not active
242 # ActiveIf constraint: CYGPKG_KERNEL
243 # CYGPKG_KERNEL (unknown) == 0
247 # No user value, uncomment the following line to provide one.
249 # value_source default
250 # Default value: CYGVAR_KERNEL_THREADS_DATA
251 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
253 # Requires: CYGVAR_KERNEL_THREADS_DATA
254 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
259 # Trace verbosity level for debugging the <string.h>
260 # functions strtok() and strtok_r(). Increase this
261 # value to get additional trace output.
263 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
265 # No user value, uncomment the following line to provide one.
267 # value_source default
269 # Legal values: 0 to 1
274 # This option indicates whether strdup() is to be supported.
276 cdl_option CYGFUN_LIBC_STRING_STRDUP {
277 # ActiveIf constraint: CYGINT_ISO_MALLOC
278 # CYGINT_ISO_MALLOC == 1
281 # Calculated value: 1
286 # C library string functions build options
287 # Package specific build options including control over
288 # compiler flags used only in building this package,
289 # and details of which tests are built.
291 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
292 # There is no associated value.
296 # Additional compiler flags
297 # This option modifies the set of compiler flags for
298 # building the C library. These flags are used in addition
299 # to the set of global flags.
301 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
303 # No user value, uncomment the following line to provide one.
304 # user_value "-fno-rtti -Woverloaded-virtual"
305 # value_source default
306 # Default value: "-fno-rtti -Woverloaded-virtual"
309 # Suppressed compiler flags
310 # This option modifies the set of compiler flags for
311 # building the C library. These flags are removed from
312 # the set of global flags if present.
314 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
316 # No user value, uncomment the following line to provide one.
317 # user_value -Wno-pointer-sign
318 # value_source default
319 # Default value: -Wno-pointer-sign
322 # C library string function tests
323 # This option specifies the set of tests for the C library
326 cdl_option CYGPKG_LIBC_STRING_TESTS {
327 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
329 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
334 # Common ethernet support
335 # doc: ref/io-eth-drv-generic.html
336 # Platform independent ethernet drivers
338 cdl_package CYGPKG_IO_ETH_DRIVERS {
339 # Packages cannot be added or removed, nor can their version be changed,
340 # simply by editing their value. Instead the appropriate configuration
341 # should be used to perform these actions.
343 # This value cannot be modified here.
345 # Current value: 1 current
347 # The following properties are affected by this value
348 # component CYGPKG_REDBOOT_NETWORKING
349 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
350 # package CYGPKG_DEVS_ETH_ARM_TX37
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_FEC
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_PHY
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
361 cdl_interface CYGHWR_NET_DRIVERS {
362 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
363 # This value cannot be modified here.
367 # The following properties are affected by this value
368 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
369 # ActiveIf: CYGHWR_NET_DRIVERS > 1
370 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
374 # Driver supports multicast addressing
375 # This interface defines whether or not a driver can handle
376 # requests for multicast addressing.
378 cdl_interface CYGINT_IO_ETH_MULTICAST {
379 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
380 # This value cannot be modified here.
384 # The following properties are affected by this value
387 # Support printing driver debug information
388 # Selecting this option will include code to allow the driver to
389 # print lots of information on diagnostic output such as full
392 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
394 # No user value, uncomment the following line to provide one.
396 # value_source default
401 # Driver debug output verbosity
402 # The value of this option indicates the default verbosity
403 # level of debugging output. 0 means no debugging output
404 # is made by default. Higher values indicate higher verbosity.
405 # The verbosity level may also be changed at run time by
406 # changing the variable cyg_io_eth_net_debug.
408 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
410 # No user value, uncomment the following line to provide one.
412 # value_source default
417 # Size of scatter-gather I/O lists
418 # A scatter-gather list is used to pass requests to/from
419 # the physical device driver. This list can typically be
420 # small, as the data is normally already packed into reasonable
423 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
425 # No user value, uncomment the following line to provide one.
427 # value_source default
431 # Support for standard eCos TCP/IP stack.
433 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
434 # This option is not active
435 # ActiveIf constraint: CYGPKG_NET
436 # CYGPKG_NET (unknown) == 0
440 # No user value, uncomment the following line to provide one.
442 # value_source default
444 # Requires: CYGINT_ISO_STRING_STRFUNCS
445 # CYGINT_ISO_STRING_STRFUNCS == 1
450 # Warn when there are no more mbufs
451 # Warnings about running out of mbufs are printed to the
452 # diagnostic output channel via diag_printf() if this option
453 # is enabled. Mbufs are the network stack's basic dynamic
454 # memory objects that hold all packets in transit; running
455 # out is bad for performance but not fatal, not a crash.
456 # You might want to turn off the warnings to preserve realtime
457 # properties of the system even in extremis.
459 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
460 # This option is not active
461 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
464 # No user value, uncomment the following line to provide one.
466 # value_source default
470 # Simulate network failures for testing
471 # This package contains a suite of simulated failure modes
472 # for the ethernet device layer, including dropping and/or
473 # corrupting received packets, dropping packets queued for
474 # transmission, and simulating a complete network break.
475 # It requires the kernel as a source of time information.
477 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
478 # This option is not active
479 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
482 # No user value, uncomment the following line to provide one.
484 # value_source default
489 # Drop incoming packets (percentage)
491 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
492 # This option is not active
493 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
494 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
497 # No user value, uncomment the following line to provide one.
499 # value_source default
500 # Default value: 1 10
501 # Legal values: 10 50 80
504 # Corrupt incoming packets (percentage)
506 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
507 # This option is not active
508 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
509 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
512 # No user value, uncomment the following line to provide one.
514 # value_source default
515 # Default value: 1 10
516 # Legal values: 10 50 80
519 # Drop outgoing packets (percentage)
521 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
522 # This option is not active
523 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
524 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
527 # No user value, uncomment the following line to provide one.
529 # value_source default
530 # Default value: 1 10
531 # Legal values: 10 50 80
534 # Simulate a line cut from time to time
535 # This option causes the system to drop all packets for a
536 # short random period (10s of seconds), and then act
537 # normally for up to 4 times that long. This simulates your
538 # sysadmin fiddling with plugs in the network switch
541 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
542 # This option is not active
543 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
544 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
547 # No user value, uncomment the following line to provide one.
549 # value_source default
555 # Support for stand-alone network stack.
557 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
558 # ActiveIf constraint: !CYGPKG_NET
559 # CYGPKG_NET (unknown) == 0
563 # No user value, uncomment the following line to provide one.
565 # value_source default
567 # Requires: CYGINT_ISO_STRING_MEMFUNCS
568 # CYGINT_ISO_STRING_MEMFUNCS == 1
573 # Pass packets to an alternate stack
574 # Define this to allow packets seen by this layer to be
575 # passed on to the previous logical layer, i.e. when
576 # stand-alone processing replaces system (eCos) processing.
578 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
580 # No user value, uncomment the following line to provide one.
582 # value_source default
583 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
584 # CYGPKG_REDBOOT_NETWORKING == 1
588 # Number of [network] buffers
589 # This option is used to allocate space to buffer incoming network
590 # packets. These buffers are used to hold data until they can be
591 # logically processed by higher layers.
593 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
595 # No user value, uncomment the following line to provide one.
597 # value_source default
599 # Legal values: 2 to 32
602 # Show driver warnings
603 # Selecting this option will allows the stand-alone ethernet driver
604 # to display warnings on the system console when incoming network
605 # packets are being discarded due to lack of buffer space.
607 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
608 # ActiveIf constraint: CYGPKG_REDBOOT
609 # CYGPKG_REDBOOT == current
613 # No user value, uncomment the following line to provide one.
615 # value_source default
620 # Support for lwIP network stack.
622 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
623 # This option is not active
624 # ActiveIf constraint: CYGPKG_NET_LWIP
625 # CYGPKG_NET_LWIP (unknown) == 0
629 # No user value, uncomment the following line to provide one.
631 # value_source default
633 # Requires: !CYGPKG_NET
634 # CYGPKG_NET (unknown) == 0
638 # Interrupt support required
639 # This interface is used to indicate to the low
640 # level device drivers that interrupt driven operation
641 # is required by higher layers.
643 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
644 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
645 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
646 # This value cannot be modified here.
650 # The following properties are affected by this value
653 # Common ethernet support build options
655 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
656 # There is no associated value.
660 # Additional compiler flags
661 # This option modifies the set of compiler flags for
662 # building the common ethernet support package. These flags are used in addition
663 # to the set of global flags.
665 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
667 # No user value, uncomment the following line to provide one.
668 # user_value "-D_KERNEL -D__ECOS"
669 # value_source default
670 # Default value: "-D_KERNEL -D__ECOS"
674 # Ethernet driver for Ka-Ro electronics TX37 processor module
676 cdl_package CYGPKG_DEVS_ETH_ARM_TX37 {
677 # Packages cannot be added or removed, nor can their version be changed,
678 # simply by editing their value. Instead the appropriate configuration
679 # should be used to perform these actions.
681 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
682 # CYGPKG_IO_ETH_DRIVERS == current
685 # This value cannot be modified here.
687 # Current value: 1 current
691 # FEC ethernet driver required
693 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
694 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
695 # This value cannot be modified here.
699 # The following properties are affected by this value
700 # package CYGPKG_DEVS_ETH_FEC
701 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
704 # Ka-Ro TX37 ethernet port driver
705 # This option includes the ethernet device driver for the
708 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
710 # No user value, uncomment the following line to provide one.
712 # value_source default
714 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
715 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
717 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
718 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
723 # Device name for the ETH0 ethernet driver
724 # This option sets the name of the ethernet device.
726 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
728 # No user value, uncomment the following line to provide one.
729 # user_value "\"eth0\""
730 # value_source default
731 # Default value: "\"eth0\""
734 # OUI part of MAC address
735 # This option sets OUI part (manufacturer ID) of the MAC address
738 cdl_option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI {
739 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
740 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
744 # No user value, uncomment the following line to provide one.
745 # user_value "{ 0x00, 0x0c, 0xc6 }"
746 # value_source default
747 # Default value: "{ 0x00, 0x0c, 0xc6 }"
752 # Driver for fast ethernet controller.
753 # Driver for fast ethernet controller.
755 cdl_package CYGPKG_DEVS_ETH_FEC {
756 # Packages cannot be added or removed, nor can their version be changed,
757 # simply by editing their value. Instead the appropriate configuration
758 # should be used to perform these actions.
760 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
761 # CYGPKG_IO_ETH_DRIVERS == current
763 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
764 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
767 # This value cannot be modified here.
769 # Current value: 1 current
773 # MXC FEC ethernet driver build options
775 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
776 # There is no associated value.
780 # Additional compiler flags
781 # This option modifies the set of compiler flags for
782 # building the Cirrus Logic ethernet driver package.
783 # These flags are used in addition
784 # to the set of global flags.
786 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
788 # No user value, uncomment the following line to provide one.
789 # user_value "-D_KERNEL -D__ECOS"
790 # value_source default
791 # Default value: "-D_KERNEL -D__ECOS"
796 # Ethernet transceiver (PHY) support
797 # API for ethernet PHY devices
799 cdl_package CYGPKG_DEVS_ETH_PHY {
800 # Packages cannot be added or removed, nor can their version be changed,
801 # simply by editing their value. Instead the appropriate configuration
802 # should be used to perform these actions.
804 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
805 # CYGPKG_IO_ETH_DRIVERS == current
808 # This value cannot be modified here.
810 # Current value: 1 current
811 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
812 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
817 # Enable driver debugging
818 # Enables the diagnostic debug messages on the
821 cdl_option CYGDBG_DEVS_ETH_PHY {
823 # No user value, uncomment the following line to provide one.
825 # value_source default
829 # Time period (seconds) to wait for auto-negotiation
830 # The length of time to wait for auto-negotiation to complete
831 # before giving up and declaring the link dead/missing.
833 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
835 # No user value, uncomment the following line to provide one.
837 # value_source default
842 # Include support for National Semiconductor DP83847 DsPHYTER II
844 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
846 # No user value, uncomment the following line to provide one.
848 # value_source default
853 # Include support for AMD 79C874 NetPHY
855 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
857 # No user value, uncomment the following line to provide one.
859 # value_source default
864 # Include support for Intel LXT972xxx PHY
866 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
868 # No user value, uncomment the following line to provide one.
870 # value_source default
875 # Include support for ICS 1890 PHY
877 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
879 # No user value, uncomment the following line to provide one.
881 # value_source default
886 # Include support for ICS 1892 PHY
888 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
890 # No user value, uncomment the following line to provide one.
892 # value_source default
897 # Include support for ICS 1893 and 1893AF PHY
899 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
901 # No user value, uncomment the following line to provide one.
903 # value_source default
908 # Include support for the Davicom DM9161A PHY
910 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
912 # No user value, uncomment the following line to provide one.
914 # value_source default
919 # Include support for the Micrel KS8721 PHY
921 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
923 # No user value, uncomment the following line to provide one.
925 # value_source default
930 # Include support for SMSC LAN8700 NetPHY
932 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
934 # No user value, uncomment the following line to provide one.
936 # The inferred value should not be edited directly.
938 # value_source inferred
941 # The following properties are affected by this value
942 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
943 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
948 # ISO C library internationalization functions
950 # This package provides internationalization functions specified by the
951 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
952 # functionality and <ctype.h> functionality.
954 cdl_package CYGPKG_LIBC_I18N {
955 # Packages cannot be added or removed, nor can their version be changed,
956 # simply by editing their value. Instead the appropriate configuration
957 # should be used to perform these actions.
959 # This value cannot be modified here.
961 # Current value: 1 current
962 # Requires: CYGPKG_ISOINFRA
963 # CYGPKG_ISOINFRA == current
969 # These options determine which locales other than the "C" locale
970 # are supported and hence contribute to the size of the executable.
972 cdl_component CYGPKG_LIBC_I18N_LOCALES {
973 # There is no associated value.
977 # Support for multiple locales required
979 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
980 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
981 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
982 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
983 # This value cannot be modified here.
986 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
987 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
990 # The following properties are affected by this value
993 # C-SJIS locale support
994 # This option controls if the "C-SJIS" locale will be
995 # supported by setlocale(). The locale is a hybrid locale
996 # that is mostly the "C" locale with Japanese SJIS multibyte
999 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1001 # No user value, uncomment the following line to provide one.
1003 # value_source default
1006 # The following properties are affected by this value
1007 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1008 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1009 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1010 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1013 # C-JIS locale support
1014 # This option controls if the "C-JIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese JIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-EUCJP locale support
1034 # This option controls if the "C-EUCJP" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese EUCJP multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1054 # Newlib's ctype implementation
1055 # This option enables the implementation of the ctype functions
1056 # that comes with newlib. It is table driven and therefore
1057 # exhibits different performance characteristics. It also offers
1058 # a limited amount of binary compatibility
1059 # with newlib so that programs linked against newlib ctype/locale
1060 # do not need to be recompiled when linked with eCos.
1062 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1064 # No user value, uncomment the following line to provide one.
1066 # value_source default
1068 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1069 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1073 # Per-thread multibyte state
1074 # This option controls whether the multibyte character
1075 # handling functions mblen(), mbtowc(), and wctomb(),
1076 # have their state recorded on a per-thread
1077 # basis rather than global. If this option is
1078 # disabled, some per-thread space can be saved.
1079 # Enabling this option will use three slots
1080 # of kernel per-thread data. You should ensure you
1081 # have enough slots configured for all your
1084 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1085 # This option is not active
1086 # ActiveIf constraint: CYGPKG_KERNEL
1087 # CYGPKG_KERNEL (unknown) == 0
1091 # No user value, uncomment the following line to provide one.
1093 # value_source default
1094 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1095 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1097 # Requires: CYGVAR_KERNEL_THREADS_DATA
1098 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1102 # Size of locale name strings
1103 # This option controls the maximum size of
1104 # locale names and is used, among other things
1105 # to instantiate a static string used
1106 # as a return value from the
1107 # setlocale() function. When requesting the
1108 # current locale settings with LC_ALL, a string
1109 # must be constructed to contain this data, rather
1110 # than just returning a constant string. This
1111 # string data is stored in the static string.
1112 # This depends on the length of locale names,
1113 # hence this option. If just the C locale is
1114 # present, this option can be set as low as 2.
1116 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1118 # No user value, uncomment the following line to provide one.
1120 # value_source default
1121 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1122 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1123 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1124 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1126 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1127 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1128 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1129 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1132 # Inline versions of <ctype.h> functions
1133 # This option chooses whether the simple character
1134 # classification and conversion functions (e.g.
1135 # isupper(), isalpha(), toupper(), etc.)
1136 # from <ctype.h> are available as inline
1137 # functions. This may improve performance and as
1138 # the functions are small, may even improve code
1141 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1143 # No user value, uncomment the following line to provide one.
1145 # value_source default
1147 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1148 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1152 # C library i18n functions build options
1153 # Package specific build options including control over
1154 # compiler flags used only in building this package,
1155 # and details of which tests are built.
1157 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1158 # There is no associated value.
1162 # Additional compiler flags
1163 # This option modifies the set of compiler flags for
1164 # building the C library. These flags are used in addition
1165 # to the set of global flags.
1167 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1169 # No user value, uncomment the following line to provide one.
1170 # user_value "-fno-rtti -Woverloaded-virtual"
1171 # value_source default
1172 # Default value: "-fno-rtti -Woverloaded-virtual"
1175 # Suppressed compiler flags
1176 # This option modifies the set of compiler flags for
1177 # building the C library. These flags are removed from
1178 # the set of global flags if present.
1180 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1182 # No user value, uncomment the following line to provide one.
1183 # user_value -Wno-pointer-sign
1184 # value_source default
1185 # Default value: -Wno-pointer-sign
1188 # C library i18n function tests
1189 # This option specifies the set of tests for the C library
1192 cdl_option CYGPKG_LIBC_I18N_TESTS {
1193 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1195 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1200 # ISO C library general utility functions
1201 # doc: ref/libc.html
1202 # This package provides general utility functions in <stdlib.h>
1203 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1205 cdl_package CYGPKG_LIBC_STDLIB {
1206 # Packages cannot be added or removed, nor can their version be changed,
1207 # simply by editing their value. Instead the appropriate configuration
1208 # should be used to perform these actions.
1210 # This value cannot be modified here.
1212 # Current value: 1 current
1213 # Requires: CYGPKG_ISOINFRA
1214 # CYGPKG_ISOINFRA == current
1216 # Requires: CYGINT_ISO_CTYPE
1217 # CYGINT_ISO_CTYPE == 1
1219 # Requires: CYGINT_ISO_STRING_STRFUNCS
1220 # CYGINT_ISO_STRING_STRFUNCS == 1
1225 # Inline versions of <stdlib.h> functions
1226 # This option chooses whether some of the
1227 # particularly simple standard utility functions
1228 # from <stdlib.h> are available as inline
1229 # functions. This may improve performance, and as
1230 # the functions are small, may even improve code
1233 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1234 # There is no associated value.
1240 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1242 # No user value, uncomment the following line to provide one.
1244 # value_source default
1246 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1247 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1253 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1255 # No user value, uncomment the following line to provide one.
1257 # value_source default
1259 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1260 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1264 # atof() / atoi() / atol()
1266 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1268 # No user value, uncomment the following line to provide one.
1270 # value_source default
1272 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1273 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1278 # Random number generation
1279 # These options control the behaviour of the
1280 # functions rand(), srand() and rand_r()
1282 cdl_component CYGPKG_LIBC_RAND {
1283 # There is no associated value.
1287 # Per-thread random seed
1288 # doc: ref/libc-thread-safety.html
1289 # This option controls whether the pseudo-random
1290 # number generation functions rand() and srand()
1291 # have their state recorded on a per-thread
1292 # basis rather than global. If this option is
1293 # disabled, some per-thread space can be saved.
1294 # Note there is also a POSIX-standard rand_r()
1295 # function to achieve a similar effect with user
1296 # support. Enabling this option will use one slot
1297 # of kernel per-thread data. You should ensure you
1298 # have enough slots configured for all your
1301 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1303 # No user value, uncomment the following line to provide one.
1305 # value_source default
1307 # Requires: CYGVAR_KERNEL_THREADS_DATA
1308 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1312 # Random number seed
1313 # This selects the initial random number seed for
1314 # rand()'s pseudo-random number generator. For
1315 # strict ISO standard compliance, this should be 1,
1316 # as per section 7.10.2.2 of the standard.
1318 cdl_option CYGNUM_LIBC_RAND_SEED {
1320 # No user value, uncomment the following line to provide one.
1322 # value_source default
1324 # Legal values: 0 to 0x7fffffff
1328 # Trace verbosity level for debugging the rand(),
1329 # srand() and rand_r() functions. Increase this
1330 # value to get additional trace output.
1332 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1334 # No user value, uncomment the following line to provide one.
1336 # value_source default
1338 # Legal values: 0 to 1
1341 # Simplest implementation
1342 # This provides a very simple implementation of rand()
1343 # that does not perform well with randomness in the
1344 # lower significant bits. However it is exceptionally
1345 # fast. It uses the sample algorithm from the ISO C
1348 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1350 # No user value, uncomment the following line to provide one.
1352 # value_source default
1356 # Simple implementation #1
1357 # This provides a very simple implementation of rand()
1358 # based on the simplest implementation above. However
1359 # it does try to work around the lack of randomness
1360 # in the lower significant bits, at the expense of a
1363 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1370 # Knuth implementation #1
1371 # This implements a slightly more complex algorithm
1372 # published in Donald E. Knuth's Art of Computer
1373 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1374 # This produces better random numbers than the
1375 # simplest approach but is slower.
1377 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1386 # This option allows use of the utility function
1387 # strtod() (and consequently atof()) to convert
1388 # from string to double precision floating point
1389 # numbers. Disabling this option removes the
1390 # dependency on the math library package.
1392 cdl_option CYGFUN_LIBC_strtod {
1394 # No user value, uncomment the following line to provide one.
1396 # value_source default
1397 # Default value: 0 != CYGPKG_LIBM
1398 # CYGPKG_LIBM (unknown) == 0
1400 # Requires: CYGPKG_LIBM
1401 # CYGPKG_LIBM (unknown) == 0
1405 # Provides long long conversion functions
1406 # Enabling this option will provide support for the strtoll(),
1407 # strtoull() and atoll() conversion functions, which are
1408 # the long long variants of the standard versions of these
1409 # functions. Supporting this requires extra code and compile
1412 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1419 # bsearch() tracing level
1420 # Trace verbosity level for debugging the <stdlib.h>
1421 # binary search function bsearch(). Increase this
1422 # value to get additional trace output.
1424 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1426 # No user value, uncomment the following line to provide one.
1428 # value_source default
1430 # Legal values: 0 to 1
1433 # qsort() tracing level
1434 # Trace verbosity level for debugging the <stdlib.h>
1435 # quicksort function qsort(). Increase this value
1436 # to get additional trace output.
1438 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1440 # No user value, uncomment the following line to provide one.
1442 # value_source default
1444 # Legal values: 0 to 1
1447 # C library stdlib build options
1448 # Package specific build options including control over
1449 # compiler flags used only in building this package,
1450 # and details of which tests are built.
1452 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1453 # There is no associated value.
1457 # Additional compiler flags
1458 # This option modifies the set of compiler flags for
1459 # building this package. These flags are used in addition
1460 # to the set of global flags.
1462 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1464 # No user value, uncomment the following line to provide one.
1465 # user_value "-fno-rtti -Woverloaded-virtual"
1466 # value_source default
1467 # Default value: "-fno-rtti -Woverloaded-virtual"
1470 # Suppressed compiler flags
1471 # This option modifies the set of compiler flags for
1472 # building this package. These flags are removed from
1473 # the set of global flags if present.
1475 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1477 # No user value, uncomment the following line to provide one.
1478 # user_value -Wno-pointer-sign
1479 # value_source default
1480 # Default value: -Wno-pointer-sign
1483 # C library stdlib tests
1484 # This option specifies the set of tests for this package.
1486 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1487 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1489 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1496 # doc: ref/the-ecos-hardware-abstraction-layer.html
1497 # The eCos HAL package provide a porting layer for
1498 # higher-level parts of the system such as the kernel and the
1499 # C library. Each installation should have HAL packages for
1500 # one or more architectures, and for each architecture there
1501 # may be one or more supported platforms. It is necessary to
1502 # select one target architecture and one platform for that
1503 # architecture. There are also a number of configuration
1504 # options that are common to all HAL packages.
1506 cdl_package CYGPKG_HAL {
1507 # Packages cannot be added or removed, nor can their version be changed,
1508 # simply by editing their value. Instead the appropriate configuration
1509 # should be used to perform these actions.
1511 # This value cannot be modified here.
1513 # Current value: 1 current
1514 # Requires: CYGPKG_INFRA
1515 # CYGPKG_INFRA == current
1518 # The following properties are affected by this value
1522 # Platform-independent HAL options
1523 # A number of configuration options are common to most or all
1524 # HAL packages, for example options controlling how much state
1525 # should be saved during a context switch. The implementations
1526 # of these options will vary from architecture to architecture.
1528 cdl_component CYGPKG_HAL_COMMON {
1529 # There is no associated value.
1533 # Provide eCos kernel support
1534 # The HAL can be configured to either support the full eCos
1535 # kernel, or to support only very simple applications which do
1536 # not require a full kernel. If kernel support is not required
1537 # then some of the startup, exception, and interrupt handling
1538 # code can be eliminated.
1540 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1542 # No user value, uncomment the following line to provide one.
1544 # value_source default
1545 # Default value: CYGPKG_KERNEL
1546 # CYGPKG_KERNEL (unknown) == 0
1548 # Requires: CYGPKG_KERNEL
1549 # CYGPKG_KERNEL (unknown) == 0
1553 # HAL exception support
1554 # When a processor exception occurs, for example an attempt to
1555 # execute an illegal instruction or to perform a divide by
1556 # zero, this exception may be handled in a number of different
1557 # ways. If the target system has gdb support then typically
1558 # the exception will be handled by gdb code. Otherwise if the
1559 # HAL exception support is enabled then the HAL will invoke a
1560 # routine deliver_exception(). Typically this routine will be
1561 # provided by the eCos kernel, but it is possible for
1562 # application code to provide its own implementation. If the
1563 # HAL exception support is not enabled and a processor
1564 # exception occurs then the behaviour of the system is
1567 cdl_option CYGPKG_HAL_EXCEPTIONS {
1569 # No user value, uncomment the following line to provide one.
1571 # value_source default
1572 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1573 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1575 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1576 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1580 # Stop calling constructors early
1581 # This option supports environments where some constructors
1582 # must be run in the context of a thread rather than at
1583 # simple system startup time. A boolean flag named
1584 # cyg_hal_stop_constructors is set to 1 when constructors
1585 # should no longer be invoked. It is up to some other
1586 # package to deal with the rest of the constructors.
1587 # In the current version this is only possible with the
1590 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1592 # No user value, uncomment the following line to provide one.
1594 # value_source default
1596 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1597 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1601 # HAL uses the MMU and allows for CDL manipulation of it's use
1603 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1604 # No options implement this inferface
1605 # This value cannot be modified here.
1609 # The following properties are affected by this value
1610 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1611 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1614 # Install MMU tables.
1615 # This option controls whether this application installs
1616 # its own Memory Management Unit (MMU) tables, or relies on the
1617 # existing environment to run.
1619 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1620 # This option is not active
1621 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1622 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1626 # No user value, uncomment the following line to provide one.
1628 # value_source default
1629 # Default value: CYG_HAL_STARTUP != "RAM"
1630 # CYG_HAL_STARTUP == ROMRAM
1633 # The following properties are affected by this value
1634 # option CYGSEM_HAL_STATIC_MMU_TABLES
1635 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1638 # Use static MMU tables.
1639 # This option defines an environment where any Memory
1640 # Management Unit (MMU) tables are constant. Normally used by ROM
1641 # based environments, this provides a way to save RAM usage which
1642 # would otherwise be required for these tables.
1644 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1650 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1651 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1655 # Route diagnostic output to debug channel
1656 # If not inheriting the console setup from the ROM monitor,
1657 # it is possible to redirect diagnostic output to the debug
1658 # channel by enabling this option. Depending on the debugger
1659 # used it may also be necessary to select a mangler for the
1660 # output to be displayed by the debugger.
1662 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1663 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1664 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1666 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1667 # CYGPKG_HAL_ARM == current
1668 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1669 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1670 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1674 # No user value, uncomment the following line to provide one.
1676 # value_source default
1677 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1678 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1679 # CYG_HAL_STARTUP == ROMRAM
1682 # The following properties are affected by this value
1683 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1684 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1688 # Mangler used on diag output
1689 # It is sometimes necessary to mangle (encode) the
1690 # diag ASCII text output in order for it to show up at the
1691 # other end. In particular, GDB may silently ignore raw
1694 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1695 # This option is not active
1696 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1699 # No user value, uncomment the following line to provide one.
1701 # value_source default
1702 # Default value: GDB
1703 # Legal values: "GDB" "None"
1708 # HAL interrupt handling
1709 # A number of configuration options related to interrupt
1710 # handling are common to most or all HAL packages, even though
1711 # the implementations will vary from architecture to
1714 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1715 # There is no associated value.
1719 # Use separate stack for interrupts
1720 # When an interrupt occurs this interrupt can be handled either
1721 # on the current stack or on a separate stack maintained by the
1722 # HAL. Using a separate stack requires a small number of extra
1723 # instructions in the interrupt handling code, but it has the
1724 # advantage that it is no longer necessary to allow extra space
1725 # in every thread stack for the interrupt handlers. The amount
1726 # of extra space required depends on the interrupt handlers
1727 # that are being used.
1729 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1731 # No user value, uncomment the following line to provide one.
1733 # The inferred value should not be edited directly.
1735 # value_source inferred
1738 # The following properties are affected by this value
1739 # package CYGPKG_REDBOOT
1740 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1743 # Interrupt stack size
1744 # This configuration option specifies the stack size in bytes
1745 # for the interrupt stack. Typically this should be a multiple
1746 # of 16, but the exact requirements will vary from architecture
1747 # to architecture. The interrupt stack serves two separate
1748 # purposes. It is used as the stack during system
1749 # initialization. In addition, if the interrupt system is
1750 # configured to use a separate stack then all interrupts will
1751 # be processed on this stack. The exact memory requirements
1752 # will vary from application to application, and will depend
1753 # heavily on whether or not other interrupt-related options,
1754 # for example nested interrupts, are enabled. On most targets,
1755 # in a configuration with no kernel this stack will also be
1756 # the stack used to invoke the application, and must obviously
1757 # be appropriately large in that case.
1759 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1761 # No user value, uncomment the following line to provide one.
1763 # value_source default
1764 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1765 # CYGPKG_KERNEL (unknown) == 0
1767 # Legal values: 128 to 1048576
1770 # Allow nested interrupts
1771 # When an interrupt occurs the HAL interrupt handling code can
1772 # either leave interrupts disabled for the duration of the
1773 # interrupt handling code, or by doing some extra work it can
1774 # reenable interrupts before invoking the interrupt handler and
1775 # thus allow nested interrupts to happen. If all the interrupt
1776 # handlers being used are small and do not involve any loops
1777 # then it is usually better to disallow nested interrupts.
1778 # However if any of the interrupt handlers are more complicated
1779 # than nested interrupts will usually be required.
1781 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1783 # No user value, uncomment the following line to provide one.
1785 # value_source default
1789 # Save minimum context on interrupt
1790 # The HAL interrupt handling code can exploit the calling conventions
1791 # defined for a given architecture to reduce the amount of state
1792 # that has to be saved. Generally this improves performance and
1793 # reduces code size. However it can make source-level debugging
1796 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1798 # No user value, uncomment the following line to provide one.
1800 # The inferred value should not be edited directly.
1802 # value_source inferred
1805 # The following properties are affected by this value
1806 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1807 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1808 # component CYGBLD_BUILD_REDBOOT
1809 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1812 # Chain all interrupts together
1813 # Interrupts can be attached to vectors either singly, or be
1814 # chained together. The latter is necessary if there is no way
1815 # of discovering which device has interrupted without
1816 # inspecting the device itself. It can also reduce the amount
1817 # of RAM needed for interrupt decoding tables and code.
1819 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1821 # No user value, uncomment the following line to provide one.
1823 # value_source default
1827 # Ignore spurious [fleeting] interrupts
1828 # On some hardware, interrupt sources may not be de-bounced or
1829 # de-glitched. Rather than try to handle these interrupts (no
1830 # handling may be possible), this option allows the HAL to simply
1831 # ignore them. In most cases, if the interrupt is real it will
1832 # reoccur in a detectable form.
1834 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1836 # No user value, uncomment the following line to provide one.
1838 # value_source default
1843 # HAL context switch support
1844 # A number of configuration options related to thread contexts
1845 # are common to most or all HAL packages, even though the
1846 # implementations will vary from architecture to architecture.
1848 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1849 # There is no associated value.
1851 # The following properties are affected by this value
1855 # Use minimum thread context
1856 # The thread context switch code can exploit the calling
1857 # conventions defined for a given architecture to reduce the
1858 # amount of state that has to be saved during a context
1859 # switch. Generally this improves performance and reduces
1860 # code size. However it can make source-level debugging more
1863 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1865 # No user value, uncomment the following line to provide one.
1867 # The inferred value should not be edited directly.
1869 # value_source inferred
1872 # The following properties are affected by this value
1873 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1874 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1875 # component CYGBLD_BUILD_REDBOOT
1876 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1880 # Explicit control over cache behaviour
1881 # These options let the default behaviour of the caches
1882 # be easily configurable.
1884 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1885 # There is no associated value.
1889 # Enable DATA cache on startup
1890 # Enabling this option will cause the data cache to be enabled
1891 # as soon as practicable when eCos starts up. One would choose
1892 # to disable this if the data cache cannot safely be turned on,
1893 # such as a case where the cache(s) require additional platform
1896 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1898 # No user value, uncomment the following line to provide one.
1900 # value_source default
1905 # DATA cache mode on startup
1906 # This option controls the mode the cache will be set to
1907 # when enabled on startup.
1909 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1911 # No user value, uncomment the following line to provide one.
1912 # user_value COPYBACK
1913 # value_source default
1914 # Default value: COPYBACK
1915 # Legal values: "COPYBACK" "WRITETHRU"
1919 # Enable INSTRUCTION cache on startup
1920 # Enabling this option will cause the instruction cache to be enabled
1921 # as soon as practicable when eCos starts up. One would choose
1922 # to disable this if the instruction cache cannot safely be turned on,
1923 # such as a case where the cache(s) require additional platform
1926 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1928 # No user value, uncomment the following line to provide one.
1930 # value_source default
1935 # Source-level debugging support
1936 # If the source level debugger gdb is to be used for debugging
1937 # application code then it may be necessary to configure in support
1938 # for this in the HAL.
1940 cdl_component CYGPKG_HAL_DEBUG {
1941 # There is no associated value.
1945 # Support for GDB stubs
1946 # The HAL implements GDB stubs for the target.
1948 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1949 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
1950 # This value cannot be modified here.
1954 # The following properties are affected by this value
1955 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1956 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1957 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1958 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1961 # Include GDB stubs in HAL
1962 # This option causes a set of GDB stubs to be included into the
1963 # system. On some target systems the GDB support will be
1964 # provided by other means, for example by a ROM monitor. On
1965 # other targets, especially when building a ROM-booting system,
1966 # the necessary support has to go into the target library
1967 # itself. When GDB stubs are include in a configuration, HAL
1968 # serial drivers must also be included.
1970 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1971 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1972 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1976 # No user value, uncomment the following line to provide one.
1978 # The inferred value should not be edited directly.
1980 # value_source inferred
1982 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1983 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1985 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1986 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
1988 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1989 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
1991 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1992 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1993 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1996 # The following properties are affected by this value
1997 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1998 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1999 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2000 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2001 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2002 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2003 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2004 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2005 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2006 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2007 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2008 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2009 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2010 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2011 # option CYGPKG_HAL_GDB_FILEIO
2012 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2013 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2014 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2015 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2016 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2017 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # Support for external break support in GDB stubs
2022 # The HAL implements external break (or asynchronous interrupt)
2023 # in the GDB stubs for the target.
2025 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2026 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
2027 # This value cannot be modified here.
2031 # The following properties are affected by this value
2032 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2033 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2036 # Include GDB external break support for stubs
2037 # This option causes the GDB stub to add a serial interrupt handler
2038 # which will listen for GDB break packets. This lets you stop the
2039 # target asynchronously when using GDB, usually by hitting Control+C
2040 # or pressing the STOP button. This option differs from
2041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2042 # GDB stubs are present.
2044 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2045 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2046 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2050 # No user value, uncomment the following line to provide one.
2052 # value_source default
2053 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2054 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2056 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2057 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2060 # The following properties are affected by this value
2061 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2062 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2063 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2064 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2065 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2066 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2069 # Platform does not support CTRLC
2071 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2072 # No options implement this inferface
2073 # This value cannot be modified here.
2077 # The following properties are affected by this value
2078 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2079 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2082 # Include GDB external break support when no stubs
2083 # This option adds an interrupt handler for the GDB serial line
2084 # which will listen for GDB break packets. This lets you stop the
2085 # target asynchronously when using GDB, usually by hitting Control+C
2086 # or pressing the STOP button. This option differs from
2087 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2088 # stubs are NOT present.
2090 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2091 # This option is not active
2092 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2093 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2094 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2096 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2097 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # No user value, uncomment the following line to provide one.
2103 # value_source default
2104 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2105 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2107 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2108 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2111 # The following properties are affected by this value
2112 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2113 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2114 # component CYGBLD_BUILD_REDBOOT
2115 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2118 # Include GDB multi-threading debug support
2119 # This option enables some extra HAL code which is needed
2120 # to support multi-threaded source level debugging.
2122 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2123 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2124 # CYGSEM_HAL_ROM_MONITOR == 1
2125 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2129 # No user value, uncomment the following line to provide one.
2131 # value_source default
2134 # The following properties are affected by this value
2135 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2136 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2137 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2138 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2141 # Number of times to retry sending a $O packet
2142 # This option controls the number of attempts that eCos programs
2143 # will make to send a $O packet to a host GDB process. If it is
2144 # set non-zero, then the target process will attempt to resend the
2145 # $O packet data up to this number of retries. Caution: use of
2146 # this option is not recommended as it can thoroughly confuse the
2149 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2151 # No user value, uncomment the following line to provide one.
2153 # value_source default
2157 # Timeout period for GDB packets
2158 # This option controls the time (in milliseconds) that eCos programs
2159 # will wait for a response when sending packets to a host GDB process.
2160 # If this time elapses, then the packet will be resent, up to some
2161 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2163 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2165 # No user value, uncomment the following line to provide one.
2167 # value_source default
2168 # Default value: 500
2171 # Location of CRC32 table
2172 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2173 # and placed in ROM, or generated at runtime in RAM. Depending on
2174 # your memory constraints, one of these options may be better.
2176 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2178 # No user value, uncomment the following line to provide one.
2180 # value_source default
2181 # Default value: RAM
2182 # Legal values: "ROM" "RAM"
2186 # ROM monitor support
2187 # Support for ROM monitors can be built in to your application.
2188 # It may also be relevant to build your application as a ROM monitor
2189 # itself. Such options are contained here if relevant for your chosen
2190 # platform. The options and ROM monitors available to choose are
2191 # platform-dependent.
2193 cdl_component CYGPKG_HAL_ROM_MONITOR {
2194 # There is no associated value.
2196 # The following properties are affected by this value
2200 # Target has virtual vector support
2202 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2203 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
2204 # This value cannot be modified here.
2208 # The following properties are affected by this value
2209 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2210 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2213 # Target supports baud rate control via vectors
2214 # Whether this target supports the __COMMCTL_GETBAUD
2215 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2217 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2218 # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled
2219 # This value cannot be modified here.
2223 # The following properties are affected by this value
2224 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2225 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2228 # Enable use of virtual vector calling interface
2229 # Virtual vector support allows the HAL to let the ROM
2230 # monitor handle certain operations. The virtual vector table
2231 # defines a calling interface between applications running in
2232 # RAM and the ROM monitor.
2234 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2235 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2236 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2239 # Calculated value: 1
2243 # The following properties are affected by this value
2244 # component CYGBLD_BUILD_REDBOOT
2245 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2246 # package CYGPKG_DEVS_ETH_PHY
2247 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2251 # Inherit console settings from ROM monitor
2252 # When this option is set, the application will inherit
2253 # the console as set up by the ROM monitor. This means
2254 # that the application will use whatever channel and
2255 # mangling style was used by the ROM monitor when
2256 # the application was launched.
2258 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2259 # This option is not active
2260 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2261 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2265 # No user value, uncomment the following line to provide one.
2267 # value_source default
2268 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2269 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2272 # The following properties are affected by this value
2273 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2274 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2275 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2276 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2279 # Debug channel is configurable
2280 # This option is a configuration hint - it is enabled
2281 # when the HAL initialization code will make use
2282 # of the debug channel configuration option.
2284 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2285 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2286 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2290 # The following properties are affected by this value
2291 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2292 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2295 # Console channel is configurable
2296 # This option is a configuration hint - it is enabled
2297 # when the HAL initialization code will make use
2298 # of the console channel configuration option.
2300 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2301 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2302 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2303 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2307 # The following properties are affected by this value
2308 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2309 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2312 # Initialize whole of virtual vector table
2313 # This option will cause the whole of the virtual
2314 # vector table to be initialized with dummy values on
2315 # startup. When this option is enabled, all the
2316 # options below must also be enabled - or the
2317 # table would be empty when the application
2319 # On targets where older ROM monitors without
2320 # virtual vector support may still be in use, it is
2321 # necessary for RAM applictions to initialize the
2322 # table (since all HAL diagnostics and debug IO
2323 # happens via the table).
2325 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2327 # No user value, uncomment the following line to provide one.
2329 # value_source default
2330 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2331 # CYG_HAL_STARTUP == ROMRAM
2332 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2334 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2335 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2337 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2338 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2340 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2341 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2343 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2344 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2346 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2347 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2350 # The following properties are affected by this value
2351 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2352 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2353 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2355 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2356 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2357 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2359 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2361 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2362 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2363 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2364 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2367 # Claim virtual vector table entries by default
2368 # By default most virtual vectors will be claimed by
2369 # RAM startup configurations, meaning that the RAM
2370 # application will provide the services. The
2371 # exception is COMMS support (HAL
2372 # diagnostics/debugging IO) which is left in the
2373 # control of the ROM monitor.
2374 # The reasoning behind this is to get as much of the
2375 # code exercised during regular development so it
2376 # is known to be working the few times a new ROM
2377 # monitor or a ROM production configuration is used
2378 # - COMMS are excluded only by necessity in order to
2379 # avoid breaking an existing debugger connections
2380 # (there may be ways around this).
2381 # For production RAM configurations this option can
2382 # be switched off, causing the appliction to rely on
2383 # the ROM monitor for these services, thus
2384 # saving some space.
2385 # Individual vectors may also be left unclaimed,
2386 # controlled by the below options (meaning that the
2387 # associated service provided by the ROM monitor
2390 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2391 # This option is not active
2392 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2393 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2397 # No user value, uncomment the following line to provide one.
2399 # value_source default
2402 # The following properties are affected by this value
2403 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2404 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2405 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2406 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2407 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2408 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2409 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2410 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2413 # Claim reset virtual vectors
2414 # This option will cause the reset and kill_by_reset
2415 # virtual vectors to be claimed.
2417 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2419 # No user value, uncomment the following line to provide one.
2421 # value_source default
2422 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2423 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2424 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2427 # The following properties are affected by this value
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2429 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2432 # Claim version virtual vectors
2433 # This option will cause the version
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2446 # Claim delay_us virtual vector
2447 # This option will cause the delay_us
2448 # virtual vector to be claimed.
2450 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2452 # No user value, uncomment the following line to provide one.
2454 # value_source default
2455 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2456 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2457 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2460 # The following properties are affected by this value
2461 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2465 # Claim cache virtual vectors
2466 # This option will cause the cache virtual vectors
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2484 # Claim data virtual vectors
2485 # This option will cause the data virtual vectors
2486 # to be claimed. At present there is only one, used
2487 # by the RedBoot ethernet driver to share diag output.
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2504 # Claim comms virtual vectors
2505 # This option will cause the communication tables
2506 # that are part of the virtual vectors mechanism to
2507 # be claimed. Note that doing this may cause an
2508 # existing ROM monitor communication connection to
2509 # be closed. For this reason, the option is disabled
2510 # per default for normal application
2513 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2515 # No user value, uncomment the following line to provide one.
2517 # value_source default
2518 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2519 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2520 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2523 # The following properties are affected by this value
2524 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2525 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2526 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2527 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2528 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2529 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2530 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2531 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2534 # Do diagnostic IO via virtual vector table
2535 # All HAL IO happens via the virtual vector table / comm
2536 # tables when those tables are supported by the HAL.
2537 # If so desired, the low-level IO functions can
2538 # still be provided by the RAM application by
2539 # enabling the CLAIM_COMMS option.
2541 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2542 # Calculated value: 1
2546 # The following properties are affected by this value
2547 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2548 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2549 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2550 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Behave as a ROM monitor
2555 # Enable this option if this program is to be used as a ROM monitor,
2556 # i.e. applications will be loaded into RAM on the TX37 module, and this
2557 # ROM monitor may process exceptions or interrupts generated from the
2558 # application. This enables features such as utilizing a separate
2559 # interrupt stack when exceptions are generated.
2561 cdl_option CYGSEM_HAL_ROM_MONITOR {
2563 # No user value, uncomment the following line to provide one.
2565 # The inferred value should not be edited directly.
2567 # value_source inferred
2569 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2570 # CYG_HAL_STARTUP == ROMRAM
2571 # CYG_HAL_STARTUP == ROMRAM
2574 # The following properties are affected by this value
2575 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2576 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2577 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2578 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2579 # option CYGPRI_REDBOOT_ROM_MONITOR
2580 # Requires: CYGSEM_HAL_ROM_MONITOR
2583 # Work with a ROM monitor
2584 # Support can be enabled for different varieties of ROM monitor.
2585 # This support changes various eCos semantics such as the encoding
2586 # of diagnostic output, or the overriding of hardware interrupt
2588 # Firstly there is "Generic" support which prevents the HAL
2589 # from overriding the hardware vectors that it does not use, to
2590 # instead allow an installed ROM monitor to handle them. This is
2591 # the most basic support which is likely to be common to most
2592 # implementations of ROM monitor.
2593 # "GDB_stubs" provides support when GDB stubs are included in
2594 # the ROM monitor or boot ROM.
2596 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2598 # No user value, uncomment the following line to provide one.
2600 # value_source default
2601 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2602 # CYG_HAL_STARTUP == ROMRAM
2604 # Legal values: "Generic" "GDB_stubs"
2605 # Requires: CYG_HAL_STARTUP == "RAM"
2606 # CYG_HAL_STARTUP == ROMRAM
2609 # The following properties are affected by this value
2610 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2611 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2612 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2613 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2614 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2615 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2616 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2617 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2621 # Platform defined I/O channels.
2622 # Platforms which provide additional I/O channels can implement
2623 # this interface, indicating that the function plf_if_init()
2624 # needs to be called.
2626 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2627 # No options implement this inferface
2628 # This value cannot be modified here.
2633 # Platform IDE I/O support.
2634 # Platforms which provide IDE controllers can implement
2635 # this interface, indicating that IDE I/O macros are
2638 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2639 # No options implement this inferface
2640 # This value cannot be modified here.
2644 # The following properties are affected by this value
2645 # component CYGSEM_REDBOOT_DISK_IDE
2646 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2649 # File I/O operations via GDB
2650 # This option enables support for various file I/O
2651 # operations using the GDB remote protocol to communicate
2652 # with GDB. The operations are then performed on the
2653 # debugging host by proxy. These operations are only
2654 # currently available by using a system call interface
2655 # to RedBoot. This may change in the future.
2657 cdl_option CYGPKG_HAL_GDB_FILEIO {
2658 # This option is not active
2659 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2660 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2664 # No user value, uncomment the following line to provide one.
2666 # value_source default
2668 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2669 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2673 # Build Compiler sanity checking tests
2674 # Enabling this option causes compiler tests to be built.
2676 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2678 # No user value, uncomment the following line to provide one.
2680 # value_source default
2683 # The following properties are affected by this value
2684 # component CYGPKG_HAL_TESTS
2685 # Calculated: "tests/context tests/basic"
2686 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2687 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2688 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2692 # This option specifies the set of tests for the common HAL.
2694 cdl_component CYGPKG_HAL_TESTS {
2695 # Calculated value: "tests/context tests/basic"
2696 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2697 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2698 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2699 # CYGINT_HAL_TESTS_NO_CACHES == 0
2700 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2701 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2703 # Current_value: tests/context tests/basic tests/cache tests/intr
2707 # Interface for cache presence
2708 # Some architectures and/or platforms do not have caches. By
2709 # implementing this interface, these can disable the various
2710 # cache-related tests.
2712 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2713 # No options implement this inferface
2714 # This value cannot be modified here.
2716 # Current value: 0 0
2718 # The following properties are affected by this value
2719 # component CYGPKG_HAL_TESTS
2720 # Calculated: "tests/context tests/basic"
2721 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2722 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2723 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2728 # The ARM architecture HAL package provides generic
2729 # support for this processor architecture. It is also
2730 # necessary to select a specific target platform HAL
2733 cdl_package CYGPKG_HAL_ARM {
2734 # Packages cannot be added or removed, nor can their version be changed,
2735 # simply by editing their value. Instead the appropriate configuration
2736 # should be used to perform these actions.
2738 # This value cannot be modified here.
2740 # Current value: 1 current
2742 # The following properties are affected by this value
2743 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2744 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2745 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2746 # ActiveIf: CYGPKG_HAL_ARM
2750 # The CPU architecture supports THUMB mode
2752 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2753 # No options implement this inferface
2754 # This value cannot be modified here.
2758 # The following properties are affected by this value
2759 # option CYGHWR_THUMB
2760 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2761 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2762 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2765 # Enable Thumb instruction set
2766 # Enable use of the Thumb instruction set.
2768 cdl_option CYGHWR_THUMB {
2769 # This option is not active
2770 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2771 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2775 # No user value, uncomment the following line to provide one.
2777 # value_source default
2780 # The following properties are affected by this value
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2785 # Enable Thumb interworking compiler option
2786 # This option controls the use of -mthumb-interwork in the
2787 # compiler flags. It defaults enabled in Thumb or ROM monitor
2788 # configurations, but can be overridden for reduced memory
2789 # footprint where interworking is not a requirement.
2791 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2792 # This option is not active
2793 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2794 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2798 # No user value, uncomment the following line to provide one.
2800 # value_source default
2801 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2803 # CYGSEM_HAL_ROM_MONITOR == 1
2807 # The platform and architecture supports Big Endian operation
2809 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2810 # No options implement this inferface
2811 # This value cannot be modified here.
2815 # The following properties are affected by this value
2816 # option CYGHWR_HAL_ARM_BIGENDIAN
2817 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2820 # Use big-endian mode
2821 # Use the CPU in big-endian mode.
2823 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2824 # This option is not active
2825 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2826 # CYGINT_HAL_ARM_BIGENDIAN == 0
2830 # No user value, uncomment the following line to provide one.
2832 # value_source default
2836 # The platform uses a processor with an ARM7 core
2838 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2839 # No options implement this inferface
2840 # This value cannot be modified here.
2844 # The following properties are affected by this value
2845 # option CYGHWR_HAL_ARM_CPU_FAMILY
2846 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2847 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2848 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2849 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2851 # option CYGHWR_HAL_ARM_CPU_FAMILY
2852 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2853 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2854 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2855 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2859 # The platform uses a processor with an ARM9 core
2861 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2862 # Implemented by CYGPKG_HAL_ARM_MX37, active, enabled
2863 # This value cannot be modified here.
2867 # The following properties are affected by this value
2868 # option CYGHWR_HAL_ARM_CPU_FAMILY
2869 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2870 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2871 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2872 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2874 # option CYGHWR_HAL_ARM_CPU_FAMILY
2875 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2876 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2877 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2878 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2882 # The platform uses a processor with a StrongARM core
2884 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2885 # No options implement this inferface
2886 # This value cannot be modified here.
2890 # The following properties are affected by this value
2891 # option CYGHWR_HAL_ARM_CPU_FAMILY
2892 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2893 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2894 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2895 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2897 # option CYGHWR_HAL_ARM_CPU_FAMILY
2898 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2899 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2900 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2901 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2905 # The platform uses a processor with a XScale core
2907 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2908 # No options implement this inferface
2909 # This value cannot be modified here.
2913 # The following properties are affected by this value
2914 # option CYGHWR_HAL_ARM_CPU_FAMILY
2915 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2916 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2917 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2918 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2920 # option CYGHWR_HAL_ARM_CPU_FAMILY
2921 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2922 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2923 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2924 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2929 # It is possible to optimize code for different
2930 # ARM CPU families. This option selects which CPU to
2931 # optimize for on boards that support multiple CPU types.
2933 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2935 # No user value, uncomment the following line to provide one.
2937 # value_source default
2938 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2939 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2940 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2941 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2943 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2944 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2945 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2946 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2948 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2949 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2950 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2951 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2953 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2954 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2955 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2956 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2959 # Provide diagnostic dump for exceptions
2960 # Print messages about hardware exceptions, including
2961 # raw exception frame dump and register contents.
2963 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2965 # No user value, uncomment the following line to provide one.
2967 # value_source default
2969 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2970 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2974 # Process all exceptions with the eCos application
2975 # Normal RAM-based programs which do not include GDB stubs
2976 # defer processing of the illegal instruction exception to GDB.
2977 # Setting this options allows the program to explicitly handle
2978 # the illegal instruction exception itself. Note: this will
2979 # prevent the use of GDB to debug the application as breakpoints
2980 # will no longer work.
2982 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2990 # Support GDB thread operations via ICE/Multi-ICE
2991 # Allow GDB to get thread information via the ICE/Multi-ICE
2994 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2996 # No user value, uncomment the following line to provide one.
2998 # value_source default
3000 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3001 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3003 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3004 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3006 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3007 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3011 # Support for 'gprof' callbacks
3012 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3013 # to acquire the interrupt-context PC and SP, when this option is
3016 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3017 # This option is not active
3018 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3019 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3021 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3022 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3023 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3026 # Calculated value: 1
3031 # Accept exceptions and irq's occurring in user mode
3032 # For standalone Redboot based programs running in user mode.
3034 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3036 # No user value, uncomment the following line to provide one.
3038 # value_source default
3042 # Preserve svc spsr before returning to svc mode
3043 # This option secures exception and breakpoint processing
3044 # triggered during execution of application specific SWI
3047 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3049 # No user value, uncomment the following line to provide one.
3051 # value_source default
3057 cdl_option CYGBLD_LINKER_SCRIPT {
3058 # Calculated value: "src/arm.ld"
3060 # Current_value: src/arm.ld
3063 # Implementations of hal_arm_mem_real_region_top()
3065 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3066 # No options implement this inferface
3067 # This value cannot be modified here.
3072 # Freescale SoC architecture
3073 # This HAL variant package provides generic
3074 # support for the Freescale SoC. It is also
3075 # necessary to select a specific target platform HAL
3078 cdl_package CYGPKG_HAL_ARM_MX37 {
3079 # Packages cannot be added or removed, nor can their version be changed,
3080 # simply by editing their value. Instead the appropriate configuration
3081 # should be used to perform these actions.
3083 # This value cannot be modified here.
3085 # Current value: 1 current
3087 # The following properties are affected by this value
3091 # Processor clock rate
3092 # The processor can run at various frequencies.
3093 # These values are expressed in KHz. Note that there are
3094 # several steppings of the rate to run at different
3095 # maximum frequencies. Check the specs to make sure that your
3096 # particular processor can run at the rate you select here.
3098 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3099 # This option is not active
3100 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3101 # CYG_HAL_STARTUP == ROMRAM
3105 # No user value, uncomment the following line to provide one.
3107 # value_source default
3108 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3109 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3110 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3111 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3113 # Legal values: 150000 200000
3116 # Real-time clock constants
3118 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3119 # There is no associated value.
3123 # Real-time clock numerator
3125 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3126 # Calculated value: 1000000000
3128 # Current_value: 1000000000
3131 # Real-time clock denominator
3132 # This option selects the heartbeat rate for the real-time clock.
3133 # The rate is specified in ticks per second. Change this value
3134 # with caution - too high and your system will become saturated
3135 # just handling clock interrupts, too low and some operations
3136 # such as thread scheduling may become sluggish.
3138 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3140 # No user value, uncomment the following line to provide one.
3142 # value_source default
3143 # Default value: 100
3145 # The following properties are affected by this value
3146 # option CYGNUM_HAL_RTC_PERIOD
3147 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3150 # Real-time clock period
3152 cdl_option CYGNUM_HAL_RTC_PERIOD {
3153 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3154 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3156 # Current_value: 36864
3160 # UART1 available as diagnostic/debug channel
3161 # The chip has multiple serial channels which may be
3162 # used for different things on different platforms. This
3163 # interface allows a platform to indicate that the specified
3164 # serial port can be used as a diagnostic and/or debug channel.
3166 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3167 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
3168 # This value cannot be modified here.
3172 # The following properties are affected by this value
3175 # UART2 available as diagnostic/debug channel
3176 # The chip has multiple serial channels which may be
3177 # used for different things on different platforms. This
3178 # interface allows a platform to indicate that the specified
3179 # serial port can be used as a diagnostic and/or debug channel.
3181 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3182 # Implemented by CYGPKG_HAL_ARM_TX37KARO, active, enabled
3183 # This value cannot be modified here.
3187 # The following properties are affected by this value
3190 # UART3 available as diagnostic/debug channel
3191 # The chip has multiple serial channels which may be
3192 # used for different things on different platforms. This
3193 # interface allows a platform to indicate that the specified
3194 # serial port can be used as a diagnostic and/or debug channel.
3196 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3197 # No options implement this inferface
3198 # This value cannot be modified here.
3203 # UART4 available as diagnostic/debug channel
3204 # The chip has multiple serial channels which may be
3205 # used for different things on different platforms. This
3206 # interface allows a platform to indicate that the specified
3207 # serial port can be used as a diagnostic and/or debug channel.
3209 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3210 # No options implement this inferface
3211 # This value cannot be modified here.
3216 # UART5 available as diagnostic/debug channel
3217 # The chip has multiple serial channels which may be
3218 # used for different things on different platforms. This
3219 # interface allows a platform to indicate that the specified
3220 # serial port can be used as a diagnostic and/or debug channel.
3222 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3223 # No options implement this inferface
3224 # This value cannot be modified here.
3230 # This HAL platform package provides generic
3231 # support for the Ka-Ro electronics TX37 module.
3233 cdl_package CYGPKG_HAL_ARM_TX37KARO {
3234 # Packages cannot be added or removed, nor can their version be changed,
3235 # simply by editing their value. Instead the appropriate configuration
3236 # should be used to perform these actions.
3238 # This value cannot be modified here.
3240 # Current value: 1 current
3241 # Requires: CYGINT_ISO_CTYPE
3242 # CYGINT_ISO_CTYPE == 1
3244 # Requires: CYGBLD_BUILD_REDBOOT == 1
3245 # CYGBLD_BUILD_REDBOOT == 1
3251 # The only startup type allowed is ROMRAM, since this will allow
3252 # the program to exist in ROM, but be copied to RAM during startup
3253 # which is required to boot from NAND flash.
3255 cdl_component CYG_HAL_STARTUP {
3257 # No user value, uncomment the following line to provide one.
3259 # value_source default
3260 # Default value: ROMRAM
3261 # Legal values: "ROMRAM"
3263 # The following properties are affected by this value
3264 # option CYGSEM_HAL_ROM_MONITOR
3265 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3266 # option CYGSEM_HAL_ROM_MONITOR
3267 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3268 # option CYGSEM_HAL_USE_ROM_MONITOR
3269 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3270 # option CYGSEM_HAL_USE_ROM_MONITOR
3271 # Requires: CYG_HAL_STARTUP == "RAM"
3272 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3273 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3274 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3275 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3276 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3277 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3278 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3279 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3280 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3281 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3282 # option CYGPRI_REDBOOT_ROM_MONITOR
3283 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3284 # option CYGPRI_REDBOOT_ROM_MONITOR
3285 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3288 # Diagnostic serial port baud rate
3289 # This option selects the baud rate used for the console port.
3290 # Note: this should match the value chosen for the GDB port if the
3291 # console and GDB port are the same.
3293 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3295 # No user value, uncomment the following line to provide one.
3297 # value_source default
3298 # Default value: 115200
3299 # Legal values: 9600 19200 38400 57600 115200
3302 # GDB serial port baud rate
3303 # This option selects the baud rate used for the GDB port.
3304 # Note: this should match the value chosen for the console port if the
3305 # console and GDB port are the same.
3307 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3309 # No user value, uncomment the following line to provide one.
3311 # value_source default
3312 # Default value: 115200
3313 # Legal values: 9600 19200 38400 57600 115200
3316 # Number of communication channels on the TX37
3318 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3319 # Calculated value: 2
3323 # The following properties are affected by this value
3324 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3325 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3326 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3327 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3329 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3333 # The TX37 provides access to two serial ports. This option
3334 # chooses which port will be used to connect to a host
3337 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3338 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3339 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3343 # No user value, uncomment the following line to provide one.
3345 # value_source default
3347 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3348 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3351 # Default console channel.
3353 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3354 # Calculated value: 0
3357 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3358 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3360 # The following properties are affected by this value
3361 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3362 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3365 # Console serial port
3366 # The TX37 provides access to two serial ports. This option
3367 # chooses which port will be used for console output.
3369 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3370 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3371 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3375 # No user value, uncomment the following line to provide one.
3377 # value_source default
3378 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3379 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3381 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3382 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 2
3385 # Ka-Ro electronics TX37 module build options
3386 # Package specific build options including control over
3387 # compiler flags used only in building this package,
3388 # and details of which tests are built.
3390 cdl_component CYGPKG_HAL_ARM_TX37_OPTIONS {
3391 # There is no associated value.
3392 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3393 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3399 # This option specifies the SDRAM size of the TX37 module.
3401 cdl_option CYGNUM_HAL_ARM_TX37_SDRAM_SIZE {
3403 # No user value, uncomment the following line to provide one.
3404 # user_value 0x08000000
3405 # value_source default
3406 # Default value: 0x08000000
3407 # Legal values: 0x08000000 0x04000000
3410 # Enable low level debugging with LED
3411 # This option enables low level debugging by blink codes
3412 # of the LED on STK5.
3414 cdl_option CYGOPT_HAL_ARM_TX37_DEBUG {
3416 # No user value, uncomment the following line to provide one.
3418 # value_source default
3419 # Default value: false
3420 # false (unknown) == 0
3424 # Additional compiler flags
3425 # This option modifies the set of compiler flags for
3426 # building the TX37 HAL. These flags are used in addition
3427 # to the set of global flags.
3429 cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_ADD {
3431 # No user value, uncomment the following line to provide one.
3433 # value_source default
3437 # Suppressed compiler flags
3438 # This option modifies the set of compiler flags for
3439 # building the TX37 HAL. These flags are removed from
3440 # the set of global flags if present.
3442 cdl_option CYGPKG_HAL_ARM_TX37_CFLAGS_REMOVE {
3444 # No user value, uncomment the following line to provide one.
3446 # value_source default
3453 cdl_component CYGHWR_MEMORY_LAYOUT {
3454 # Calculated value: "arm_tx37_romram"
3456 # Current_value: arm_tx37_romram
3460 # Memory layout linker script fragment
3462 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3463 # Calculated value: "<pkgconf/mlt_arm_tx37_romram.ldi>"
3465 # Current_value: <pkgconf/mlt_arm_tx37_romram.ldi>
3468 # Memory layout header file
3470 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3471 # Calculated value: "<pkgconf/mlt_arm_tx37_romram.h>"
3473 # Current_value: <pkgconf/mlt_arm_tx37_romram.h>
3482 # Common types and useful macros.
3483 # Tracing and assertion facilities.
3484 # Package startup options.
3486 cdl_package CYGPKG_INFRA {
3487 # Packages cannot be added or removed, nor can their version be changed,
3488 # simply by editing their value. Instead the appropriate configuration
3489 # should be used to perform these actions.
3491 # This value cannot be modified here.
3493 # Current value: 1 current
3495 # The following properties are affected by this value
3496 # package CYGPKG_HAL
3497 # Requires: CYGPKG_INFRA
3498 # component CYGBLD_BUILD_REDBOOT
3499 # Requires: CYGPKG_INFRA
3504 # The eCos source code contains a significant amount of
3505 # internal debugging support, in the form of assertions and
3507 # Assertions check at runtime that various conditions are as
3508 # expected; if not, execution is halted.
3509 # Tracing takes the form of text messages that are output
3510 # whenever certain events occur, or whenever functions are
3512 # The most important property of these checks and messages is
3513 # that they are not required for the program to run.
3514 # It is prudent to develop software with assertions enabled,
3515 # but disable them when making a product release, thus
3516 # removing the overhead of that checking.
3517 # It is possible to enable assertions and tracing
3519 # There are also options controlling the exact behaviour of
3520 # the assertion and tracing facilities, thus giving users
3521 # finer control over the code and data size requirements.
3523 cdl_component CYGPKG_INFRA_DEBUG {
3525 # No user value, uncomment the following line to provide one.
3527 # value_source default
3530 # The following properties are affected by this value
3531 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3532 # ActiveIf: CYGPKG_INFRA_DEBUG
3537 # If this option is defined, asserts in the code are tested.
3538 # Assert functions (CYG_ASSERT()) are defined in
3539 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3540 # If it is not defined, these result in no additional
3541 # object code and no checking of the asserted conditions.
3543 cdl_component CYGDBG_USE_ASSERTS {
3544 # This option is not active
3545 # The parent CYGPKG_INFRA_DEBUG is disabled
3548 # No user value, uncomment the following line to provide one.
3550 # value_source default
3552 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3553 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3556 # The following properties are affected by this value
3557 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3558 # Requires: CYGDBG_USE_ASSERTS
3559 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3560 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3565 # This option allows individual control of preconditions.
3566 # A precondition is one type of assert, which it is
3567 # useful to control separately from more general asserts.
3568 # The function is CYG_PRECONDITION(condition,msg).
3570 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3571 # This option is not active
3572 # The parent CYGDBG_USE_ASSERTS is not active
3575 # No user value, uncomment the following line to provide one.
3577 # value_source default
3582 # This option allows individual control of postconditions.
3583 # A postcondition is one type of assert, which it is
3584 # useful to control separately from more general asserts.
3585 # The function is CYG_POSTCONDITION(condition,msg).
3587 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3588 # This option is not active
3589 # The parent CYGDBG_USE_ASSERTS is not active
3592 # No user value, uncomment the following line to provide one.
3594 # value_source default
3599 # This option allows individual control of loop invariants.
3600 # A loop invariant is one type of assert, which it is
3601 # useful to control separately from more general asserts,
3602 # particularly since a loop invariant is typically evaluated
3603 # a great many times when used correctly.
3604 # The function is CYG_LOOP_INVARIANT(condition,msg).
3606 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3607 # This option is not active
3608 # The parent CYGDBG_USE_ASSERTS is not active
3611 # No user value, uncomment the following line to provide one.
3613 # value_source default
3618 # All assertions within eCos contain a text message
3619 # which should give some information about the condition
3621 # These text messages will end up being embedded in the
3622 # application image and hence there is a significant penalty
3623 # in terms of image size.
3624 # It is possible to suppress the use of these messages by
3625 # disabling this option.
3626 # This results in smaller code size, but there is less
3627 # human-readable information if an assertion actually gets
3630 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3631 # This option is not active
3632 # The parent CYGDBG_USE_ASSERTS is not active
3635 # No user value, uncomment the following line to provide one.
3637 # value_source default
3643 # If this option is defined, tracing operations
3644 # result in output or logging, depending on other options.
3645 # This may have adverse effects on performance, if the time
3646 # taken to output message overwhelms the available CPU
3647 # power or output bandwidth.
3648 # Trace functions (CYG_TRACE()) are defined in
3649 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3650 # If it is not defined, these result in no additional
3651 # object code and no trace information.
3653 cdl_component CYGDBG_USE_TRACING {
3654 # This option is not active
3655 # The parent CYGPKG_INFRA_DEBUG is disabled
3658 # No user value, uncomment the following line to provide one.
3660 # value_source default
3662 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3663 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3666 # The following properties are affected by this value
3667 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3668 # ActiveIf: CYGDBG_USE_TRACING
3669 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3670 # ActiveIf: CYGDBG_USE_TRACING
3671 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3672 # ActiveIf: CYGDBG_USE_TRACING
3673 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3674 # ActiveIf: CYGDBG_USE_TRACING
3675 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3676 # ActiveIf: CYGDBG_USE_TRACING
3680 # Trace function reports
3681 # This option allows individual control of
3682 # function entry/exit tracing, independent of
3683 # more general tracing output.
3684 # This may be useful to remove clutter from a
3687 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3688 # This option is not active
3689 # The parent CYGDBG_USE_TRACING is not active
3690 # The parent CYGDBG_USE_TRACING is disabled
3693 # No user value, uncomment the following line to provide one.
3695 # value_source default
3700 # All trace calls within eCos contain a text message
3701 # which should give some information about the circumstances.
3702 # These text messages will end up being embedded in the
3703 # application image and hence there is a significant penalty
3704 # in terms of image size.
3705 # It is possible to suppress the use of these messages by
3706 # disabling this option.
3707 # This results in smaller code size, but there is less
3708 # human-readable information available in the trace output,
3709 # possibly only filenames and line numbers.
3711 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3712 # This option is not active
3713 # The parent CYGDBG_USE_TRACING is not active
3714 # The parent CYGDBG_USE_TRACING is disabled
3717 # No user value, uncomment the following line to provide one.
3719 # value_source default
3724 # Trace output implementations
3726 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3727 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3728 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3729 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3730 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3731 # This option is not active
3732 # The parent CYGPKG_INFRA_DEBUG is disabled
3734 # This value cannot be modified here.
3738 # The following properties are affected by this value
3739 # component CYGDBG_USE_ASSERTS
3740 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3741 # component CYGDBG_USE_TRACING
3742 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3746 # A null output module which is useful when
3747 # debugging interactively; the output routines
3748 # can be breakpointed rather than have them actually
3749 # 'print' something.
3751 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3752 # This option is not active
3753 # The parent CYGPKG_INFRA_DEBUG is disabled
3756 # No user value, uncomment the following line to provide one.
3758 # value_source default
3763 # An output module which produces simple output
3764 # from tracing and assertion events.
3766 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3767 # This option is not active
3768 # The parent CYGPKG_INFRA_DEBUG is disabled
3771 # No user value, uncomment the following line to provide one.
3773 # value_source default
3778 # An output module which produces fancy output
3779 # from tracing and assertion events.
3781 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3782 # This option is not active
3783 # The parent CYGPKG_INFRA_DEBUG is disabled
3786 # No user value, uncomment the following line to provide one.
3788 # value_source default
3793 # An output module which buffers output
3794 # from tracing and assertion events. The stored
3795 # messages are output when an assert fires, or
3796 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3798 # Of course, there will only be stored messages
3799 # if tracing per se (CYGDBG_USE_TRACING)
3802 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3803 # This option is not active
3804 # The parent CYGPKG_INFRA_DEBUG is disabled
3807 # No user value, uncomment the following line to provide one.
3809 # value_source default
3815 # The size of the trace buffer. This counts the number
3816 # of trace records stored. When the buffer fills it
3817 # either wraps, stops recording, or generates output.
3819 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3820 # This option is not active
3821 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3822 # ActiveIf constraint: CYGDBG_USE_TRACING
3823 # CYGDBG_USE_TRACING == 0
3827 # No user value, uncomment the following line to provide one.
3829 # value_source default
3831 # Legal values: 5 to 65535
3834 # Wrap trace buffer when full
3835 # When the trace buffer has filled with records it
3836 # starts again at the beginning. Hence only the last
3837 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3840 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3841 # This option is not active
3842 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3843 # ActiveIf constraint: CYGDBG_USE_TRACING
3844 # CYGDBG_USE_TRACING == 0
3848 # No user value, uncomment the following line to provide one.
3850 # value_source default
3854 # Halt trace buffer when full
3855 # When the trace buffer has filled with records it
3856 # stops recording. Hence only the first
3857 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3860 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3861 # This option is not active
3862 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3863 # ActiveIf constraint: CYGDBG_USE_TRACING
3864 # CYGDBG_USE_TRACING == 0
3868 # No user value, uncomment the following line to provide one.
3870 # value_source default
3874 # Print trace buffer when full
3875 # When the trace buffer has filled with records it
3876 # prints the contents of the buffer. The buffer is then
3877 # emptied and the system continues.
3879 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3880 # This option is not active
3881 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3882 # ActiveIf constraint: CYGDBG_USE_TRACING
3883 # CYGDBG_USE_TRACING == 0
3887 # No user value, uncomment the following line to provide one.
3889 # value_source default
3893 # Print trace buffer on assert fail
3894 # When an assertion fails the trace buffer will be
3895 # printed to the default diagnostic device.
3897 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3898 # This option is not active
3899 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3900 # ActiveIf constraint: CYGDBG_USE_TRACING
3901 # CYGDBG_USE_TRACING == 0
3905 # No user value, uncomment the following line to provide one.
3907 # value_source default
3912 # Use function names
3913 # All trace and assert calls within eCos contain a
3914 # reference to the builtin macro '__PRETTY_FUNCTION__',
3915 # which evaluates to a string containing
3916 # the name of the current function.
3917 # This is useful when reading a trace log.
3918 # It is possible to suppress the use of the function name
3919 # by disabling this option.
3920 # This results in smaller code size, but there is less
3921 # human-readable information available in the trace output,
3922 # possibly only filenames and line numbers.
3924 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3925 # This option is not active
3926 # The parent CYGPKG_INFRA_DEBUG is disabled
3929 # No user value, uncomment the following line to provide one.
3931 # value_source default
3937 # Some packages require a startup routine to be called.
3938 # This can be carried out by application code, by supplying
3939 # a routine called cyg_package_start() which calls the
3940 # appropriate package startup routine(s).
3941 # Alternatively, this routine can be constructed automatically
3942 # and configured to call the startup routines of your choice.
3944 cdl_component CYGPKG_INFRA_STARTUP {
3945 # There is no associated value.
3949 # Start uITRON subsystem
3950 # Generate a call to initialize the
3951 # uITRON compatibility subsystem
3952 # within the system version of cyg_package_start().
3953 # This enables compatibility with uITRON.
3954 # You must configure uITRON with the correct tasks before
3955 # starting the uItron subsystem.
3956 # If this is disabled, and you want to use uITRON,
3957 # you must call cyg_uitron_start() from your own
3958 # cyg_package_start() or cyg_userstart().
3960 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
3961 # This option is not active
3962 # ActiveIf constraint: CYGPKG_UITRON
3963 # CYGPKG_UITRON (unknown) == 0
3967 # No user value, uncomment the following line to provide one.
3969 # value_source default
3971 # Requires: CYGPKG_UITRON
3972 # CYGPKG_UITRON (unknown) == 0
3977 # Smaller slower memcpy()
3978 # Enabling this option causes the implementation of
3979 # the standard memcpy() routine to reduce code
3980 # size at the expense of execution speed. This
3981 # option is automatically enabled with the use of
3982 # the -Os option to the compiler. Also note that
3983 # the compiler will try to use its own builtin
3984 # version of memcpy() if possible, ignoring the
3985 # implementation in this package, unless given
3986 # the -fno-builtin compiler option.
3988 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
3990 # No user value, uncomment the following line to provide one.
3992 # value_source default
3996 # Smaller slower memset()
3997 # Enabling this option causes the implementation of
3998 # the standard memset() routine to reduce code
3999 # size at the expense of execution speed. This
4000 # option is automatically enabled with the use of
4001 # the -Os option to the compiler. Also note that
4002 # the compiler will try to use its own builtin
4003 # version of memset() if possible, ignoring the
4004 # implementation in this package, unless given
4005 # the -fno-builtin compiler option.
4007 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4009 # No user value, uncomment the following line to provide one.
4011 # value_source default
4015 # Provide empty C++ delete functions
4016 # To deal with virtual destructors, where the correct delete()
4017 # function must be called for the derived class in question, the
4018 # underlying delete is called when needed, from destructors. This
4019 # is regardless of whether the destructor is called by delete itself.
4020 # So there is a reference to delete() from all destructors. The
4021 # default builtin delete() attempts to call free() if there is
4022 # one defined. So, if you have destructors, and you have free(),
4023 # as in malloc() and free(), any destructor counts as a reference
4024 # to free(). So the dynamic memory allocation code is linked
4025 # in regardless of whether it gets explicitly called. This
4026 # increases code and data size needlessly.
4027 # To defeat this undesirable behaviour, we define empty versions
4028 # of delete and delete. But doing this prevents proper use
4029 # of dynamic memory in C++ programs via C++'s new and delete
4031 # Therefore, this option is provided
4032 # for explicitly disabling the provision of these empty functions,
4033 # so that new and delete can be used, if that is what is required.
4035 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4037 # No user value, uncomment the following line to provide one.
4039 # value_source default
4043 # Threshold for valid number of delete calls
4044 # Some users don't know about the empty delete function and then
4045 # wonder why their C++ classes are leaking memory. If
4046 # INFRA_DEBUG is enabled we keep a counter for the number of
4047 # times delete is called. If it goes above this threshold we throw
4048 # an assertion failure. This should point heavy users of
4049 # delete in the right direction without upsetting those who want
4050 # an empty delete function.
4052 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4053 # This option is not active
4054 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4055 # CYGPKG_INFRA_DEBUG == 0
4059 # No user value, uncomment the following line to provide one.
4061 # value_source default
4062 # Default value: 100
4065 # Provide dummy abort() function
4066 # This option controls the inclusion of a dummy abort() function.
4067 # Parts of the C and C++ compiler runtime systems contain references
4068 # to abort(), particulary in the C++ exception handling code. It is
4069 # not possible to eliminate these references, so this dummy function
4070 # in included to satisfy them. It is not expected that this function
4071 # will ever be called, so its current behaviour is to simply loop.
4073 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4075 # No user value, uncomment the following line to provide one.
4077 # value_source default
4078 # Default value: CYGINT_ISO_EXIT == 0
4079 # CYGINT_ISO_EXIT == 0
4081 # Requires: !CYGINT_ISO_EXIT
4082 # CYGINT_ISO_EXIT == 0
4086 # Reset platform at end of test case execution
4087 # If this option is set then test case programs will reset the platform
4088 # when they terminate, as opposed to the default which is to just hang
4091 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4093 # No user value, uncomment the following line to provide one.
4095 # value_source default
4099 # Provide dummy strlen() function
4100 # This option controls the inclusion of a dummy strlen() function.
4101 # Parts of the C and C++ compiler runtime systems contain references
4102 # to strlen(), particulary in the C++ exception handling code. It is
4103 # not possible to eliminate these references, so this dummy function
4104 # in included to satisfy them. While it is not expected that this function
4105 # will ever be called, it is functional but uses the simplest, smallest
4106 # algorithm. There is a faster version of strlen() in the C library.
4108 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4110 # No user value, uncomment the following line to provide one.
4112 # value_source default
4113 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4114 # CYGINT_ISO_STRING_STRFUNCS == 1
4116 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4117 # CYGINT_ISO_STRING_STRFUNCS == 1
4121 # Make all compiler warnings show as errors
4122 # Enabling this option will cause all compiler warnings to show
4123 # as errors and bring the library build to a halt. This is used
4124 # to ensure that the code base is warning free, and thus ensure
4125 # that newly introduced warnings stand out and get fixed before
4126 # they show up as weird run-time behavior.
4128 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4130 # No user value, uncomment the following line to provide one.
4132 # The inferred value should not be edited directly.
4134 # value_source inferred
4136 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4137 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4140 # The following properties are affected by this value
4141 # option CYGBLD_GLOBAL_CFLAGS
4142 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4145 # Make compiler and assembler communicate by pipe
4146 # Enabling this option will cause the compiler to feed the
4147 # assembly output the the assembler via a pipe instead of
4148 # via a temporary file. This normally reduces the build
4151 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4156 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4157 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4161 # Infra build options
4162 # Package specific build options including control over
4163 # compiler flags used only in building this package.
4165 cdl_component CYGPKG_INFRA_OPTIONS {
4166 # There is no associated value.
4170 # Additional compiler flags
4171 # This option modifies the set of compiler flags for
4172 # building the eCos infra package. These flags are used
4173 # in addition to the set of global flags.
4175 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4177 # No user value, uncomment the following line to provide one.
4178 # user_value "-fno-rtti -Woverloaded-virtual"
4179 # value_source default
4180 # Default value: "-fno-rtti -Woverloaded-virtual"
4183 # Suppressed compiler flags
4184 # This option modifies the set of compiler flags for
4185 # building the eCos infra package. These flags are removed from
4186 # the set of global flags if present.
4188 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4190 # No user value, uncomment the following line to provide one.
4191 # user_value -Wno-pointer-sign
4192 # value_source default
4193 # Default value: -Wno-pointer-sign
4196 # Suppressed linker flags
4197 # This option modifies the set of linker flags for
4198 # building the eCos infra package tests. These flags are removed from
4199 # the set of global flags if present.
4201 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4203 # No user value, uncomment the following line to provide one.
4204 # user_value -Wl,--gc-sections
4205 # value_source default
4206 # Default value: -Wl,--gc-sections
4209 # Additional linker flags
4210 # This option modifies the set of linker flags for
4211 # building the eCos infra package tests. These flags are added to
4212 # the set of global flags if present.
4214 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4216 # No user value, uncomment the following line to provide one.
4217 # user_value -Wl,--fatal-warnings
4218 # value_source default
4219 # Default value: -Wl,--fatal-warnings
4222 # Infra package tests
4224 cdl_component CYGPKG_INFRA_TESTS {
4225 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4227 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4231 # Number of times a test runs
4232 # This option controls the number of times tests will execute their
4233 # basic function. Not all tests will honor this setting, but those
4234 # that do will execute the test N times before terminating. A value
4235 # less than 0 indicates to run forever.
4237 cdl_option CYGNUM_TESTS_RUN_COUNT {
4239 # No user value, uncomment the following line to provide one.
4241 # value_source default
4248 # Redboot ROM monitor
4249 # doc: ref/redboot.html
4250 # This package supports the Redboot [stand-alone debug monitor]
4251 # using eCos as the underlying board support mechanism.
4253 cdl_package CYGPKG_REDBOOT {
4254 # Packages cannot be added or removed, nor can their version be changed,
4255 # simply by editing their value. Instead the appropriate configuration
4256 # should be used to perform these actions.
4258 # This value cannot be modified here.
4260 # Current value: 1 current
4261 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4262 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4265 # The following properties are affected by this value
4266 # component CYGPKG_REDBOOT_ARM_OPTIONS
4267 # ActiveIf: CYGPKG_REDBOOT
4268 # component CYGPKG_REDBOOT_HAL_OPTIONS
4269 # ActiveIf: CYGPKG_REDBOOT
4270 # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS
4271 # ActiveIf: CYGPKG_REDBOOT
4272 # option CYGSEM_IO_ETH_DRIVERS_WARN
4273 # ActiveIf: CYGPKG_REDBOOT
4277 # Include support for ELF file format
4279 cdl_component CYGSEM_REDBOOT_ELF {
4281 # No user value, uncomment the following line to provide one.
4283 # value_source default
4288 # Use the virtual address in the ELF headers
4289 # The ELF headers contain both a virtual and a physical address
4290 # for where code/data should be loaded. By default the physical
4291 # address is used but sometimes it is necassary to use the
4292 # virtual address because of bugy toolchains
4294 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4296 # No user value, uncomment the following line to provide one.
4298 # value_source default
4303 # Methods of loading images using redboot
4305 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4306 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4307 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4308 # This value cannot be modified here.
4312 # The following properties are affected by this value
4313 # component CYGBLD_BUILD_REDBOOT
4314 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4317 # Build Redboot ROM ELF image
4318 # This option enables the building of the Redboot ELF image.
4319 # The image may require further relocation or symbol
4320 # stripping before being converted to a binary image.
4321 # This is handled by a rule in the target CDL.
4323 cdl_component CYGBLD_BUILD_REDBOOT {
4325 # No user value, uncomment the following line to provide one.
4327 # The inferred value should not be edited directly.
4329 # value_source inferred
4331 # Requires: CYGPKG_INFRA
4332 # CYGPKG_INFRA == current
4334 # Requires: CYGPKG_ISOINFRA
4335 # CYGPKG_ISOINFRA == current
4337 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4338 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4340 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4341 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4343 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4344 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4346 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4347 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4349 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4350 # CYGINT_ISO_STRING_MEMFUNCS == 1
4352 # Requires: CYGINT_ISO_STRING_STRFUNCS
4353 # CYGINT_ISO_STRING_STRFUNCS == 1
4355 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4356 # CYGINT_REDBOOT_LOAD_METHOD == 2
4359 # The following properties are affected by this value
4360 # package CYGPKG_HAL_ARM_TX37KARO
4361 # Requires: CYGBLD_BUILD_REDBOOT == 1
4362 # option CYGBLD_BUILD_REDBOOT_BIN
4363 # ActiveIf: CYGBLD_BUILD_REDBOOT
4367 # Include GDB support in RedBoot
4368 # RedBoot normally includes support for the GDB debugging
4369 # protocols. This option allows this to be disabled which
4370 # may yield a substantial savings in terms of code and memory
4373 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4374 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4375 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4379 # No user value, uncomment the following line to provide one.
4381 # The inferred value should not be edited directly.
4383 # value_source inferred
4385 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4386 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4388 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4389 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4393 # Threads debugging support
4394 # Enabling this option will include special code in the
4395 # GDB stubs to support debugging of threaded programs. In
4396 # the case of eCos programs, this support allows GDB to
4397 # have complete access to the eCos threads in the
4400 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4401 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4402 # CYG_HAL_STARTUP == ROMRAM
4406 # No user value, uncomment the following line to provide one.
4408 # value_source default
4410 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4411 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4415 # Customized version string
4416 # Use this option to define a customized version "string" for
4417 # RedBoot. Note: this value is only cosmetic, displayed by the
4418 # "version" command, but is useful for providing site specific
4419 # information about the RedBoot configuration.
4421 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4423 # No user value, uncomment the following line to provide one.
4425 # The inferred value should not be edited directly.
4426 inferred_value 1 "Ka-Ro 2009-06-10"
4427 # value_source inferred
4428 # Default value: 0 0
4431 # Enable command line editing
4432 # If this option is non-zero, RedBoot will remember the
4433 # last N command lines. These lines may be reused.
4434 # Enabling this history will also enable rudimentary
4435 # editting of the lines themselves.
4437 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4439 # No user value, uncomment the following line to provide one.
4441 # value_source default
4444 # The following properties are affected by this value
4445 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4446 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4447 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4448 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4451 # Enable command line editing using ANSI arrows, etc
4452 # If this option is enabled, RedBoot will accept standard ANSI key
4453 # sequences for cursor movement (along with the emacs style keys).
4455 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4456 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4457 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4461 # No user value, uncomment the following line to provide one.
4463 # value_source default
4467 # Enable history command and expansion
4468 # Enabling this option will allow RedBoot to provide a
4469 # history command to list previous commands. Also enables
4470 # history expansion via '!' character similar to bash
4473 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4475 # No user value, uncomment the following line to provide one.
4477 # value_source default
4479 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4480 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4484 # Number of unique RAM segments on platform
4485 # Change this option to be the number of memory segments which are
4486 # supported by the platform. If the value is greater than 1, then
4487 # a platform specific function must provide information about the
4488 # additional segments.
4490 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4492 # No user value, uncomment the following line to provide one.
4494 # value_source default
4498 # Include support gzip/zlib decompression
4500 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4501 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4502 # CYGPKG_COMPRESS_ZLIB == current
4506 # No user value, uncomment the following line to provide one.
4508 # value_source default
4511 # The following properties are affected by this value
4512 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4513 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4517 # Size of zlib decompression buffer
4518 # This is the size of the buffer filled with incoming data
4519 # during load before calls are made to the decompressor
4520 # function. For ethernet downloads this can be made bigger
4521 # (at the cost of memory), but for serial downloads on slow
4522 # processors it may be necessary to reduce the size to
4523 # avoid serial overruns. zlib appears to bail out if less
4524 # than five bytes are available initially so this is the
4527 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4529 # No user value, uncomment the following line to provide one.
4531 # value_source default
4533 # Legal values: 5 to 256
4536 # Support compression of Flash images
4537 # This CDL indicates whether flash images can
4538 # be decompressed from gzip/zlib format into RAM.
4540 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4541 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4542 # CYGPKG_REDBOOT_FLASH == 1
4544 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4545 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4546 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4549 # Calculated value: 1
4554 # Include GZIP uncompress command
4555 # Enable this option to include a 'gunzip' command
4556 # to uncompress GZIP compressed data.
4558 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4560 # No user value, uncomment the following line to provide one.
4562 # value_source default
4566 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4567 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4569 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4571 # No user value, uncomment the following line to provide one.
4573 # The inferred value should not be edited directly.
4575 # value_source inferred
4578 # The following properties are affected by this value
4579 # option CYGPRI_REDBOOT_ZLIB_FLASH
4580 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4584 # Include support for xyzModem downloads
4585 # doc: ref/download-command.html
4587 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4589 # No user value, uncomment the following line to provide one.
4591 # value_source default
4594 # The following properties are affected by this value
4595 # option CYGPKG_REDBOOT_CFLAGS_ADD
4596 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4599 # Additional compiler flags
4600 # This option modifies the set of compiler flags for
4601 # building the eCos infra package. These flags are used
4602 # in addition to the set of global flags.
4604 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4605 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4606 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4610 # No user value, uncomment the following line to provide one.
4611 # user_value -Wno-inline
4612 # value_source default
4613 # Default value: -Wno-inline
4616 # Allow the load-command write into Flash.
4617 # Write images direct to Flash via the load command.
4618 # We assume anything which is invalid RAM is flash, hence
4619 # the requires statement
4621 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4622 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4623 # CYGPKG_REDBOOT_FLASH == 1
4627 # No user value, uncomment the following line to provide one.
4629 # value_source default
4631 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4632 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4636 # Include MS Windows CE support
4637 # doc: ref/wince.html
4638 # This option enables MS Windows CE EShell support
4639 # and Windows CE .BIN images support
4641 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4648 # Include support for MXC USB downloads
4650 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4652 # No user value, uncomment the following line to provide one.
4654 # value_source default
4658 # Include support for i.MX USB OTG downloads
4660 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4662 # No user value, uncomment the following line to provide one.
4664 # value_source default
4668 # Include POSIX checksum command
4669 # doc: ref/cksum-command.html
4671 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4673 # No user value, uncomment the following line to provide one.
4675 # value_source default
4679 # Include memory fill command
4680 # doc: ref/mfill-command.html
4682 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4684 # No user value, uncomment the following line to provide one.
4686 # value_source default
4690 # Include memory compare command
4691 # doc: ref/mcmp-command.html
4693 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4695 # No user value, uncomment the following line to provide one.
4697 # value_source default
4701 # Include memory copy command
4702 # doc: ref/mcopy-command.html
4704 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4706 # No user value, uncomment the following line to provide one.
4708 # value_source default
4712 # Include memory dump command
4713 # doc: ref/dump-command.html
4715 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4717 # No user value, uncomment the following line to provide one.
4719 # value_source default
4723 # Include cache command
4724 # doc: ref/cache-command.html
4726 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4728 # No user value, uncomment the following line to provide one.
4730 # value_source default
4734 # Include exec command
4735 # doc: ref/exec-command.html
4737 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4739 # No user value, uncomment the following line to provide one.
4741 # value_source default
4744 # The following properties are affected by this value
4745 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4746 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4749 # Include I/O Memory commands 'iopeek' and 'iopoke'
4751 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4753 # No user value, uncomment the following line to provide one.
4755 # value_source default
4759 # Granularity of timer/ticks
4760 # This option controls the granularity of the timers.
4761 # Faster CPUs can afford higher granularity (lower values)
4762 # which should give higher network performance since the stack
4765 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4767 # No user value, uncomment the following line to provide one.
4769 # value_source default
4770 # Default value: 250
4771 # Legal values: 10 25 50 100 250 500 1000
4774 # Redboot Networking
4775 # This option includes networking support in RedBoot.
4777 cdl_component CYGPKG_REDBOOT_NETWORKING {
4778 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4779 # CYGPKG_IO_ETH_DRIVERS == current
4783 # No user value, uncomment the following line to provide one.
4785 # value_source default
4788 # The following properties are affected by this value
4789 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4790 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4794 # Print net debug information
4795 # This option is overriden by the configuration stored
4798 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4800 # No user value, uncomment the following line to provide one.
4802 # value_source default
4806 # Support TFTP for download
4807 # This option enables the use of the TFTP protocol for
4810 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4812 # No user value, uncomment the following line to provide one.
4814 # value_source default
4818 # Support HTTP for download
4819 # This option enables the use of the HTTP protocol for
4822 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4829 # Default IP address
4830 # This IP address is the default used by RedBoot if
4831 # a BOOTP/DHCP server does not respond. The numbers
4832 # should be separated by *commas*, and not dots. If
4833 # an IP address is configured into the Flash
4834 # configuration, that will be used in preference.
4836 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4838 # No user value, uncomment the following line to provide one.
4840 # value_source default
4841 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4842 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4847 # Do not try to use BOOTP
4848 # By default Redboot tries to use BOOTP to get an IP
4849 # address. If there's no BOOTP server on your network
4850 # use this option to avoid to wait until the
4851 # timeout. This option is overriden by the
4852 # configuration stored in flash.
4854 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4855 # This option is not active
4856 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4859 # No user value, uncomment the following line to provide one.
4861 # value_source default
4865 # Default bootp server
4866 # This IP address is the default server
4867 # address used by RedBoot if a BOOTP/DHCP
4868 # server does not respond. The numbers should
4869 # be separated by *commas*, and not dots. If
4870 # an IP address is configured into the Flash
4871 # configuration, that will be used in
4874 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4875 # This option is not active
4876 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4879 # No user value, uncomment the following line to provide one.
4881 # value_source default
4882 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4883 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4888 # Use DHCP to get IP information
4889 # Use DHCP protocol to obtain pertinent IP addresses, such
4890 # as the client, server, gateway, etc.
4892 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4894 # No user value, uncomment the following line to provide one.
4896 # value_source default
4899 # The following properties are affected by this value
4900 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4901 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4904 # Use a gateway for non-local IP traffic
4905 # Enabling this option will allow the RedBoot networking
4906 # stack to use a [single] gateway to reach a non-local
4907 # IP address. If disabled, RedBoot will only be able to
4908 # reach nodes on the same subnet.
4910 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4912 # No user value, uncomment the following line to provide one.
4914 # value_source default
4916 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4917 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4922 # Default gateway IP address
4923 # This IP address is the default used by RedBoot
4924 # if a BOOTP/DHCP server does not respond. The
4925 # numbers should be separated by *commas*, and
4926 # not dots. If an IP address is configured into
4927 # the Flash configuration, that will be used in
4930 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4932 # No user value, uncomment the following line to provide one.
4934 # value_source default
4935 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4936 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4940 # Default IP address mask
4941 # This IP address mask is the default used by
4942 # RedBoot if a BOOTP/DHCP server does not
4943 # respond. The numbers should be separated by
4944 # *commas*, and not dots. If an IP address is
4945 # configured into the Flash configuration, that
4946 # will be used in preference.
4948 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4950 # No user value, uncomment the following line to provide one.
4952 # value_source default
4953 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4954 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4959 # TCP port to listen for incoming connections
4960 # RedBoot will 'listen' on this port for incoming TCP
4961 # connections. This allows outside connections to be made
4962 # to the platform, either for GDB or RedBoot commands.
4964 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4966 # No user value, uncomment the following line to provide one.
4968 # value_source default
4969 # Default value: 9000
4972 # Number of [network] packet buffers
4973 # RedBoot may need to buffer network data to support
4974 # various connections. This option allows control
4975 # over the number of such buffered packets, and in
4976 # turn, controls the amount of memory used by RedBoot
4977 # (which is not available to user applications).
4978 # Each packet buffer takes up about 1514 bytes.
4979 # Note: there is little need to make this larger than
4982 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
4984 # No user value, uncomment the following line to provide one.
4986 # value_source default
4988 # Legal values: 3 to 8
4992 # When this option is enabled, RedBoot will be built with
4993 # support for DNS, allowing use of hostnames on the command
4996 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
4997 # This option is not active
4998 # ActiveIf constraint: CYGPKG_NS_DNS
4999 # CYGPKG_NS_DNS (unknown) == 0
5003 # No user value, uncomment the following line to provide one.
5005 # value_source default
5007 # Requires: !CYGPKG_NS_DNS_BUILD
5008 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5014 # This option sets the IP of the default DNS. The IP can be
5015 # changed at runtime as well.
5017 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5018 # This option is not active
5019 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5020 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5021 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5025 # No user value, uncomment the following line to provide one.
5026 # user_value 0.0.0.0
5027 # value_source default
5028 # Default value: 0.0.0.0
5031 # Timeout in DNS lookup
5032 # This option sets the timeout used when looking up an
5033 # address via the DNS. Default is 10 seconds.
5035 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5036 # This option is not active
5037 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5040 # No user value, uncomment the following line to provide one.
5042 # value_source default
5046 # Support the use of a domain name
5047 # This option controls if Redboot supports domain
5048 # names when performing DNS lookups
5050 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5051 # This option is not active
5052 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5055 # No user value, uncomment the following line to provide one.
5057 # value_source default
5062 # Default DNS domain
5063 # This option sets the default DNS domain name.
5064 # This value will be overwritten by the value in
5065 # flash or a domain returned by DHCP
5067 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5068 # This option is not active
5069 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5070 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5073 # No user value, uncomment the following line to provide one.
5075 # value_source default
5076 # Default value: 0 0
5079 # Get DNS domain from Flash
5080 # This option enables getting the domain name
5081 # from the flash configuration. This can later be
5082 # overwritten by a value learnt from DHCP
5084 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5085 # This option is not active
5086 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5087 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5088 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5089 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5093 # No user value, uncomment the following line to provide one.
5095 # value_source default
5099 # Use DNS domain from DHCP
5100 # This option enables the use of the domain name
5103 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5104 # This option is not active
5105 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5106 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5109 # No user value, uncomment the following line to provide one.
5111 # value_source default
5115 # BOOTP/DHCP DNS domain buffer size
5116 # This options sets the size of the static
5117 # buffer used by BOOTP/DHCP to store the DNS
5118 # domain name. The domain name will not be
5119 # set if the buffer is too small to hold it.
5121 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5122 # This option is not active
5123 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5124 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5127 # No user value, uncomment the following line to provide one.
5129 # value_source default
5135 # Default network device driver
5136 # This is the name of the default network device to use.
5138 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5139 # This option is not active
5140 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5141 # CYGHWR_NET_DRIVERS == 1
5145 # No user value, uncomment the following line to provide one.
5147 # value_source default
5148 # Default value: "\"\""
5151 # Initialize only one net device
5152 # This option tells RedBoot to stop initializing network
5153 # devices when it finds the first device which is
5154 # successfully initialized. The default behavior causes
5155 # all network devices to be initialized.
5157 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5158 # This option is not active
5159 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5160 # CYGHWR_NET_DRIVERS == 1
5164 # No user value, uncomment the following line to provide one.
5166 # value_source default
5171 # Let RedBoot use any I/O channel for its console.
5172 # If this option is enabled then RedBoot will attempt to use all
5173 # defined serial I/O channels for its console device. Once input
5174 # arrives at one of these channels then the console will use only
5177 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5179 # No user value, uncomment the following line to provide one.
5181 # The inferred value should not be edited directly.
5183 # value_source inferred
5187 # Let RedBoot adjust the baud rate of the serial console.
5188 # If this option is enabled then RedBoot will support commands
5189 # to set and query the baud rate on the selected console.
5191 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5192 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5193 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5197 # No user value, uncomment the following line to provide one.
5199 # value_source default
5203 # Run a platform specific startup function.
5204 # If this option is enabled then RedBoot will execute a platform
5205 # specific startup function before entering into its command line
5206 # processing. This allows the platform to perform any special
5207 # setups before RedBoot actually starts running. Note: the entire
5208 # RedBoot environment will already be initialized at this point.
5210 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5212 # No user value, uncomment the following line to provide one.
5214 # value_source default
5218 # Run a platform specific ESA validation function.
5219 # If this option is enabled then RedBoot will execute a platform
5220 # specific function to validate an ethernet ESA. This would be
5221 # useful if the address must conform to standards set by the
5222 # hardware manufacturer, etc.
5224 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5226 # No user value, uncomment the following line to provide one.
5228 # The inferred value should not be edited directly.
5230 # value_source inferred
5233 # The following properties are affected by this value
5234 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5235 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5236 # option CYGDAT_DEVS_ETH_ARM_TX37KARO_OUI
5237 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5240 # Maximum command line length
5241 # This option allows control over how long the CLI command line
5242 # should be. This space will be allocated statically
5243 # rather than from RedBoot's stack.
5245 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5247 # No user value, uncomment the following line to provide one.
5249 # The inferred value should not be edited directly.
5251 # value_source inferred
5252 # Default value: 256
5255 # Command processing idle timeout (ms)
5256 # This option controls the timeout period before the
5257 # command processing is considered 'idle'. Making this
5258 # number smaller will cause idle processing to take place
5259 # more often, etc. The default value of 10ms is a reasonable
5260 # tradeoff between responsiveness and overhead.
5262 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5264 # No user value, uncomment the following line to provide one.
5266 # value_source default
5270 # Validate RAM addresses during load
5271 # This option controls whether or not RedBoot will make
5272 # sure that memory being used by the "load" command is
5273 # in fact in user RAM. Leaving the option enabled makes
5274 # for a safer environment, but this check may not be valid
5275 # on all platforms, thus the ability to disable it.
5276 # ** Disable this only with great care **
5278 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5280 # No user value, uncomment the following line to provide one.
5282 # value_source default
5285 # The following properties are affected by this value
5286 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5287 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5290 # Allow RedBoot to support FLASH programming
5291 # If this option is enabled then RedBoot will provide commands
5292 # to manage images in FLASH memory. These images can be loaded
5293 # into memory for execution or executed in place.
5295 cdl_component CYGPKG_REDBOOT_FLASH {
5296 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5297 # CYGHWR_IO_FLASH_DEVICE == 1
5301 # No user value, uncomment the following line to provide one.
5303 # value_source default
5306 # The following properties are affected by this value
5307 # option CYGPRI_REDBOOT_ZLIB_FLASH
5308 # ActiveIf: CYGPKG_REDBOOT_FLASH
5309 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5310 # ActiveIf: CYGPKG_REDBOOT_FLASH
5314 # Byte order used to store info in flash.
5315 # This option controls the byte ordering used to store
5316 # the FIS directory info and flash config info.
5318 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5320 # No user value, uncomment the following line to provide one.
5321 # user_value NATURAL
5322 # value_source default
5323 # Default value: NATURAL
5324 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5327 # RedBoot Flash Image System support
5328 # doc: ref/flash-image-system.html
5329 # This option enables the Flash Image System commands
5330 # and support within RedBoot. If disabled, simple Flash
5331 # access commands such as "fis write" will still exist.
5332 # This option would be disabled for targets that need simple
5333 # FLASH manipulation, but do not have the need or space for
5334 # complete image management.
5336 cdl_option CYGOPT_REDBOOT_FIS {
5338 # No user value, uncomment the following line to provide one.
5340 # value_source default
5343 # The following properties are affected by this value
5344 # component CYGPKG_REDBOOT_FIS_CONTENTS
5345 # ActiveIf: CYGOPT_REDBOOT_FIS
5346 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5347 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5348 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5349 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5352 # Max number of chunks of free space to manage
5353 # If this option is defined then "fis free" will
5354 # rely on the FIS directory to determine what space is
5355 # free within the FLASH. This option controls the
5356 # maximum number of free segment which can be handled
5357 # (typically this number is small). If this option is
5358 # not enabled, the the archaic behaviour of actually
5359 # scanning the FLASH for erased sectors (unreliable)
5360 # will be used to determine what's free and what's
5363 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5365 # No user value, uncomment the following line to provide one.
5367 # value_source default
5368 # Default value: 1 32
5371 # Flash Image System default directory contents
5373 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5374 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5375 # CYGOPT_REDBOOT_FIS == 1
5378 # Calculated value: 1
5384 # Flash block containing the Directory
5385 # Which block of flash should hold the directory
5386 # information. Positive numbers are absolute block
5387 # numbers. Negative block numbers count backwards
5388 # from the last block. eg 2 means block 2, -2
5389 # means the last but one block.
5391 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5393 # No user value, uncomment the following line to provide one.
5395 # value_source default
5398 # The following properties are affected by this value
5399 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5400 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5401 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5404 # Redundant Flash Image System Directory Support
5405 # This option enables the use of a redundant FIS
5406 # directory within RedBoot. If enabled a flash block
5407 # will be reserved for a second copy of the fis
5408 # directory. Doing this allow for power failure safe
5409 # updates of the directory by the application.
5411 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5413 # No user value, uncomment the following line to provide one.
5415 # value_source default
5417 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5418 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5423 # Flash block containing the backup Directory
5424 # Which block of flash should hold the redundant
5425 # directory information. Positive numbers are
5426 # absolute block numbers. Negative block numbers
5427 # count backwards from the last block. eg 2 means
5428 # block 2, -2 means the last but one block.
5430 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5431 # This option is not active
5432 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5435 # No user value, uncomment the following line to provide one.
5437 # value_source default
5439 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5440 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5441 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5442 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5445 # The following properties are affected by this value
5446 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5447 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5448 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5452 # Pseudo-file to describe reserved area
5453 # If an area of FLASH is reserved, it is informative to
5454 # have a fis entry describing it. This option controls
5455 # creation of such an entry by default in the fis init
5458 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5459 # This option is not active
5460 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5461 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5465 # No user value, uncomment the following line to provide one.
5467 # value_source default
5471 # File to describe RedBoot boot image
5472 # Normally a ROM-startup RedBoot image is first in the
5473 # FLASH, and the system boots using that image. This
5474 # option controls creation of an entry describing it in
5475 # the fis init command. It might be disabled if a
5476 # platform has an immutable boot image of its own, where
5477 # we use a POST-startup RedBoot instead, which performs
5478 # less board initialization.
5480 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5482 # No user value, uncomment the following line to provide one.
5484 # value_source default
5487 # The following properties are affected by this value
5488 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5489 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5490 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5491 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5494 # File to describe RedBoot POST-compatible image
5495 # This option controls creation of an entry describing a
5496 # POST-startup RedBoot image in the fis init command.
5497 # Not all platforms support POST-startup. A platform
5498 # might have both for testing purposes, where the
5499 # eventual user would substitute their own POST code for
5500 # the initial ROM-startup RedBoot, and then jump to the
5501 # POST-compatible RedBoot immediately following.
5503 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5505 # No user value, uncomment the following line to provide one.
5507 # value_source default
5508 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5509 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5514 # Offset of POST image from FLASH start
5515 # This option specifies the offset for a POST image from
5516 # the start of FLASH. If unset, then the fis entry
5517 # describing the POST image will be placed where
5520 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5521 # This option is not active
5522 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5525 # No user value, uncomment the following line to provide one.
5527 # value_source default
5528 # Default value: 0 0
5529 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5530 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5531 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5534 # The following properties are affected by this value
5535 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5536 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5540 # File to describe RedBoot backup image
5541 # This option controls creation of an entry describing a
5542 # backup RedBoot image in the fis init command.
5543 # Conventionally a RAM-startup RedBoot image is kept
5544 # under this name for use in updating the ROM-based
5545 # RedBoot that boots the board.
5547 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5549 # No user value, uncomment the following line to provide one.
5551 # value_source default
5555 # Include ARM SIB ID in FIS
5556 # If set, this option will cause the last 5 words of
5557 # the FIS to include the special ID needed for the
5558 # flash to be recognized as a reserved area for RedBoot
5559 # by an ARM BootRom monitor.
5561 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5563 # No user value, uncomment the following line to provide one.
5565 # value_source default
5569 # Size of FIS directory entry
5570 # The FIS directory is limited to one single flash
5571 # sector. If your flash has tiny sectors, you may wish
5572 # to reduce this value in order to get more slots in
5573 # the FIS directory.
5575 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5577 # No user value, uncomment the following line to provide one.
5579 # value_source default
5580 # Default value: 256
5583 # Number of FIS directory entries
5584 # The FIS directory normally occupies a single flash
5585 # sector. Adjusting this value can allow for more than
5586 # one flash sector to be used, which is useful if your
5587 # sectors are very small.
5589 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5591 # No user value, uncomment the following line to provide one.
5593 # value_source default
5597 # Maximum RedBoot image size
5598 # This option controls the maximum length reserved
5599 # for the RedBoot boot image in the FIS table.
5600 # This should be a multiple of the flash's erase
5603 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5605 # No user value, uncomment the following line to provide one.
5606 # user_value 0x00020000
5607 # The inferred value should not be edited directly.
5608 inferred_value 0x00040000
5609 # value_source inferred
5610 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5611 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5615 # Offset from start of FLASH to RedBoot boot image
5616 # This option controls where the RedBoot boot image is
5617 # located relative to the start of FLASH.
5619 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5621 # No user value, uncomment the following line to provide one.
5623 # value_source default
5624 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5625 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5627 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5628 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5629 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5632 # The following properties are affected by this value
5633 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5634 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5635 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5636 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5637 # component CYGPKG_HAL_ARM_TX37_OPTIONS
5638 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5641 # Size of reserved area at start of FLASH
5642 # This option reserves an area at the start of
5643 # FLASH where RedBoot will never interfere; it is
5644 # expected that this area contains
5645 # (non-RedBoot-based) POST code or some other boot
5646 # monitor that executes before RedBoot.
5648 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5650 # No user value, uncomment the following line to provide one.
5652 # value_source default
5655 # The following properties are affected by this value
5656 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5657 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5658 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5659 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5660 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5661 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5665 # Keep all RedBoot FLASH data blocks locked.
5666 # When this option is enabled, RedBoot will keep configuration
5667 # data and the FIS directory blocks implicitly locked. While
5668 # this is somewhat safer, it does add overhead during updates.
5670 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5671 # This option is not active
5672 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5673 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5677 # No user value, uncomment the following line to provide one.
5679 # value_source default
5683 # Use CRC checksums on FIS images.
5684 # When this option is enabled, RedBoot will use CRC checksums
5685 # when reading and writing flash images.
5687 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5689 # No user value, uncomment the following line to provide one.
5691 # The inferred value should not be edited directly.
5693 # value_source inferred
5697 # ARM FLASH drivers support SIB flash block structure
5698 # This interface is implemented by a flash driver
5699 # to indicate that it supports the ARM SIB flash
5702 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5703 # No options implement this inferface
5704 # ActiveIf constraint: CYGPKG_HAL_ARM
5705 # CYGPKG_HAL_ARM == current
5708 # This value cannot be modified here.
5712 # The following properties are affected by this value
5713 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5714 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5717 # Use ARM SIB flash block structure
5718 # This option is used to interpret ARM Flash System
5719 # information blocks.
5721 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5722 # This option is not active
5723 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5724 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5728 # No user value, uncomment the following line to provide one.
5730 # value_source default
5735 # Keep RedBoot configuration data in FLASH
5736 # When this option is enabled, RedBoot will keep configuration
5737 # data in a separate block of FLASH memory. This data will
5738 # include such items as the node IP address or startup scripts.
5740 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5742 # No user value, uncomment the following line to provide one.
5744 # value_source default
5745 # Default value: CYGPKG_IO_FLASH != 0
5746 # CYGPKG_IO_FLASH == current
5749 # The following properties are affected by this value
5750 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5751 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5752 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5753 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5754 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5755 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5756 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5757 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5758 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5759 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5760 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5761 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5762 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5763 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5767 # Length of configuration data in FLASH
5768 # This option is used to control the amount of memory and FLASH
5769 # to be used for configuration options (persistent storage).
5771 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5773 # No user value, uncomment the following line to provide one.
5775 # value_source default
5776 # Default value: 4096
5779 # Style of media used for persistent data storage
5780 # Persistent data storage can either be held in 'norma' FLASH
5781 # or some other device (represented by the 'EEPROM' choice).
5782 # The different styles utilize different access methods.
5784 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5786 # No user value, uncomment the following line to provide one.
5788 # value_source default
5789 # Default value: FLASH
5790 # Legal values: "FLASH" "EEPROM"
5792 # The following properties are affected by this value
5793 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5794 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5795 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5796 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5799 # Merged config data and FIS directory
5800 # If this option is set, then the FIS directory and FLASH
5801 # configuration database will be stored in the same physical
5804 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5805 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5806 # CYGOPT_REDBOOT_FIS == 1
5807 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5811 # No user value, uncomment the following line to provide one.
5813 # value_source default
5816 # The following properties are affected by this value
5817 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5818 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5821 # Which block of flash to use
5822 # Which block of flash should hold the configuration
5823 # information. Positive numbers are absolute block numbers.
5824 # Negative block numbers count backwards from the last block.
5825 # eg 2 means block 2, -2 means the last but one block.
5827 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5829 # No user value, uncomment the following line to provide one.
5831 # value_source default
5835 # Support simple macros/aliases in FLASH
5836 # This option is used to allow support for simple text-based
5837 # macros (aliases). These aliases are kept in the FLASH
5838 # configuration data (persistent storage).
5840 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5842 # No user value, uncomment the following line to provide one.
5844 # value_source default
5848 # Length of strings in FLASH configuration data
5849 # This option is used to control the amount of memory
5850 # and FLASH to be used for string configuration
5851 # options (persistent storage).
5853 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5855 # No user value, uncomment the following line to provide one.
5857 # value_source default
5858 # Default value: 128
5861 # Length of configuration script(s) in FLASH
5862 # This option is used to control the amount of memory and
5863 # FLASH to be used for configuration options (persistent
5866 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5868 # No user value, uncomment the following line to provide one.
5870 # The inferred value should not be edited directly.
5872 # value_source inferred
5873 # Default value: 512
5876 # Fallback to read-only FLASH configuration
5877 # This option will cause the configuration information to
5878 # revert to the readonly information stored in the FLASH.
5879 # The option only takes effect after
5880 # 1) the config_ok flag has been set to be true,
5881 # indicating that at one time the copy in RAM was valid;
5883 # 2) the information in RAM has been verified to be invalid
5885 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5887 # No user value, uncomment the following line to provide one.
5889 # value_source default
5890 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5891 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5896 # Allow RedBoot to support fileio
5897 # If this option is enabled then RedBoot will provide commands
5898 # to load files from fileio file systems such as JFFS2.
5900 cdl_component CYGPKG_REDBOOT_FILEIO {
5901 # This option is not active
5902 # ActiveIf constraint: CYGPKG_IO_FILEIO
5903 # CYGPKG_IO_FILEIO (unknown) == 0
5907 # No user value, uncomment the following line to provide one.
5909 # value_source default
5912 # The following properties are affected by this value
5913 # option CYGNUM_REDBOOT_GETC_BUFFER
5914 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5918 # Include an ls command
5919 # If this option is enabled a simple ls command will be
5920 # included in redboot so the contents of a directory
5923 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5924 # This option is not active
5925 # The parent CYGPKG_REDBOOT_FILEIO is not active
5928 # No user value, uncomment the following line to provide one.
5930 # value_source default
5935 # Allow RedBoot to support disks
5936 # If this option is enabled then RedBoot will provide commands
5937 # to load disk files.
5939 cdl_component CYGPKG_REDBOOT_DISK {
5947 # Include Redboot commands for disk access
5949 cdl_option CYGSEM_REDBOOT_DISK {
5950 # This option is not active
5951 # The parent CYGPKG_REDBOOT_DISK is disabled
5954 # No user value, uncomment the following line to provide one.
5956 # value_source default
5957 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5958 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5962 # Hardware drivers for disk-type devices
5964 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
5965 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
5966 # This option is not active
5967 # The parent CYGPKG_REDBOOT_DISK is disabled
5969 # This value cannot be modified here.
5973 # The following properties are affected by this value
5974 # option CYGSEM_REDBOOT_DISK
5975 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
5978 # Maximum number of supported disks
5979 # This option controls the number of disks supported by
5982 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
5983 # This option is not active
5984 # The parent CYGPKG_REDBOOT_DISK is disabled
5987 # No user value, uncomment the following line to provide one.
5989 # value_source default
5993 # Maximum number of partitions per disk
5994 # This option controls the maximum number of supported
5995 # partitions per disk.
5997 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
5998 # This option is not active
5999 # The parent CYGPKG_REDBOOT_DISK is disabled
6002 # No user value, uncomment the following line to provide one.
6004 # value_source default
6008 # Support IDE disks.
6009 # When this option is enabled, RedBoot will support IDE disks.
6011 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6012 # This option is not active
6013 # The parent CYGPKG_REDBOOT_DISK is disabled
6014 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6015 # CYGINT_HAL_PLF_IF_IDE == 0
6019 # No user value, uncomment the following line to provide one.
6021 # value_source default
6026 # Work with VMware virtual disks
6027 # This option controls the disk driver behavior at
6030 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6031 # This option is not active
6032 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6035 # No user value, uncomment the following line to provide one.
6037 # value_source default
6042 # Support Linux second extended filesystems.
6043 # When this option is enabled, RedBoot will support EXT2
6046 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6047 # This option is not active
6048 # The parent CYGPKG_REDBOOT_DISK is disabled
6051 # No user value, uncomment the following line to provide one.
6053 # value_source default
6057 # Support ISO9660 filesystems.
6058 # When this option is enabled, RedBoot will support ISO9660
6061 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6062 # This option is not active
6063 # The parent CYGPKG_REDBOOT_DISK is disabled
6065 # Calculated value: 0
6072 # doc: ref/persistent-state-flash.html
6073 # This contains options related to RedBoot's boot script
6076 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6077 # There is no associated value.
6081 # Boot scripting enabled
6082 # This option controls whether RedBoot boot script
6083 # functionality is enabled.
6085 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6086 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6087 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6088 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6091 # Calculated value: 1
6096 # Use default RedBoot boot script
6097 # If enabled, this option will tell RedBoot to use the
6098 # value of this option as a default boot script.
6100 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6102 # No user value, uncomment the following line to provide one.
6104 # value_source default
6105 # Default value: 0 0
6107 # The following properties are affected by this value
6108 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6109 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6112 # Resolution (in ms) for script timeout value.
6113 # This option controls the resolution of the script
6114 # timeout. The value is specified in milliseconds
6115 # (ms), thus to have the script timeout be defined in
6116 # terms of tenths of seconds, use 100.
6118 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6120 # No user value, uncomment the following line to provide one.
6122 # The inferred value should not be edited directly.
6124 # value_source inferred
6125 # Default value: 1000
6128 # Script default timeout value
6129 # This option is used to set the default timeout for startup
6130 # scripts, when they are enabled.
6132 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6134 # No user value, uncomment the following line to provide one.
6136 # The inferred value should not be edited directly.
6138 # value_source inferred
6143 # Support RTC for time & date functions
6144 # When this option is enabled, RedBoot will support commands to
6145 # query and set the real time clock (time and date)
6147 cdl_option CYGSEM_REDBOOT_RTC {
6148 # This option is not active
6149 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6150 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6154 # No user value, uncomment the following line to provide one.
6156 # value_source default
6160 # Behave like a ROM monitor
6161 # Enabling this option will allow RedBoot to provide ROM
6162 # monitor-style services to programs which it executes.
6164 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6165 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6166 # CYG_HAL_STARTUP == ROMRAM
6167 # CYG_HAL_STARTUP == ROMRAM
6170 # Calculated value: 1
6173 # Requires: CYGSEM_HAL_ROM_MONITOR
6174 # CYGSEM_HAL_ROM_MONITOR == 1
6178 # Allow RedBoot to handle GNUPro application 'syscalls'.
6179 # If this option is enabled then RedBoot will install a
6180 # syscall handler to support debugging of applications
6181 # based on GNUPro newlib/bsp.
6183 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6185 # No user value, uncomment the following line to provide one.
6187 # value_source default
6190 # The following properties are affected by this value
6191 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6192 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6193 # option CYGPKG_HAL_GDB_FILEIO
6194 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6198 # Support additional syscalls for 'gprof' profiling
6199 # Support additional syscalls to support a periodic callback
6200 # function for histogram-style profiling, and an enquire/set
6202 # The application must use the GNUPro newlib facilities
6205 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6206 # This option is not active
6207 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6208 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6209 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6213 # No user value, uncomment the following line to provide one.
6215 # value_source default
6219 # Does the HAL support 'gprof' profiling?
6221 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6222 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6223 # This option is not active
6224 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6226 # This value cannot be modified here.
6230 # The following properties are affected by this value
6231 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6232 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6235 # Do not raise SIGTRAP when program exits
6236 # For some (single shot) newlib based programs,
6237 # exiting and returning a termination status may be
6238 # the normal expected behavior.
6240 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6241 # This option is not active
6242 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6245 # No user value, uncomment the following line to provide one.
6247 # value_source default
6252 # Use a common buffer for Zlib and FIS
6253 # Use a common memory buffer for both the zlib workspace
6254 # and FIS directory operations. This can save a substantial
6255 # amount of RAM, especially when flash sectors are large.
6257 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6258 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6259 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6260 # CYGOPT_REDBOOT_FIS == 1
6264 # No user value, uncomment the following line to provide one.
6266 # value_source default
6271 # Size of Zlib/FIS common buffer
6272 # Size of common buffer to allocate. Must be at least the
6273 # size of one flash sector.
6275 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6276 # This option is not active
6277 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6280 # No user value, uncomment the following line to provide one.
6281 # user_value 0x0000C000
6282 # value_source default
6283 # Default value: 0x0000C000
6284 # Legal values: 0x4000 to 0x80000000
6288 # Buffer size in getc when loading images
6289 # When loading images a buffer is used between redboot and the
6290 # underlying storage medium, eg a filesystem, or a socket etc.
6291 # The size of this buffer can have a big impart on load speed.
6293 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6295 # No user value, uncomment the following line to provide one.
6297 # value_source default
6298 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6299 # CYGPKG_REDBOOT_FILEIO == 0
6304 # Redboot for ARM options
6305 # This option lists the target's requirements for a valid Redboot
6308 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6309 # ActiveIf constraint: CYGPKG_REDBOOT
6310 # CYGPKG_REDBOOT == current
6313 # There is no associated value.
6315 # The following properties are affected by this value
6319 # Provide the exec command in RedBoot
6320 # This option contains requirements for booting linux
6321 # from RedBoot. The component is enabled/disabled from
6324 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6325 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6326 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6329 # There is no associated value.
6333 # Enable -x switch for exec command.
6334 # This option allows bi-endian platforms to launch kernels
6335 # built for an endianess different than the RedBoot endianess
6337 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6339 # No user value, uncomment the following line to provide one.
6341 # value_source default
6345 # Physical base address of linux kernel
6346 # This is the physical address of the base of the
6347 # Linux kernel image.
6349 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6351 # No user value, uncomment the following line to provide one.
6352 # user_value 0x40108000
6353 # The inferred value should not be edited directly.
6354 inferred_value 0x40108000
6355 # value_source inferred
6356 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6357 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6361 # Default physical base address of linux kernel
6362 # This is the physical address of the base of the
6363 # Linux kernel image. This option gets set by the
6366 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6368 # No user value, uncomment the following line to provide one.
6369 # user_value 0x00008000
6370 # The inferred value should not be edited directly.
6371 inferred_value 0x40108000
6372 # value_source inferred
6373 # Default value: 0x00008000
6375 # The following properties are affected by this value
6376 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6377 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6378 # component CYGPKG_REDBOOT_HAL_TX37_OPTIONS
6379 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6382 # Base address of linux kernel parameter tags
6383 # This is the base address of the area of memory used to
6384 # pass parameters to the Linux kernel. This should be chosen
6385 # to avoid overlap with the kernel and any ramdisk image.
6387 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6389 # No user value, uncomment the following line to provide one.
6390 # user_value 0x00000100
6391 # value_source default
6392 # Default value: 0x00000100
6397 # Redboot HAL options
6398 # This option lists the target's requirements for a valid Redboot
6401 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6402 # ActiveIf constraint: CYGPKG_REDBOOT
6403 # CYGPKG_REDBOOT == current
6406 # There is no associated value.
6410 # Build Redboot ROM binary image
6411 # This option enables the conversion of the Redboot ELF
6412 # image to a binary image suitable for ROM programming.
6414 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6415 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6416 # CYGBLD_BUILD_REDBOOT == 1
6420 # No user value, uncomment the following line to provide one.
6422 # value_source default
6427 # Redboot HAL variant options
6429 cdl_component CYGPKG_REDBOOT_HAL_TX37_OPTIONS {
6430 # ActiveIf constraint: CYGPKG_REDBOOT
6431 # CYGPKG_REDBOOT == current
6434 # There is no associated value.
6435 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6436 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x40108000
6441 # ISO C and POSIX infrastructure
6442 # eCos supports implementations of ISO C libraries and POSIX
6443 # implementations. This package provides infrastructure used by
6444 # all such implementations.
6446 cdl_package CYGPKG_ISOINFRA {
6447 # Packages cannot be added or removed, nor can their version be changed,
6448 # simply by editing their value. Instead the appropriate configuration
6449 # should be used to perform these actions.
6451 # This value cannot be modified here.
6453 # Current value: 1 current
6455 # The following properties are affected by this value
6456 # component CYGBLD_BUILD_REDBOOT
6457 # Requires: CYGPKG_ISOINFRA
6458 # package CYGPKG_LIBC_STRING
6459 # Requires: CYGPKG_ISOINFRA
6460 # package CYGPKG_COMPRESS_ZLIB
6461 # Requires: CYGPKG_ISOINFRA
6462 # package CYGPKG_IO_FLASH
6463 # Requires: CYGPKG_ISOINFRA
6464 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6465 # Requires: CYGPKG_ISOINFRA
6466 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6467 # DefaultValue: 0 != CYGPKG_ISOINFRA
6468 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6469 # ActiveIf: CYGPKG_ISOINFRA
6470 # package CYGPKG_LIBC_I18N
6471 # Requires: CYGPKG_ISOINFRA
6472 # package CYGPKG_LIBC_STDLIB
6473 # Requires: CYGPKG_ISOINFRA
6477 # Startup and termination
6479 cdl_component CYGPKG_ISO_STARTUP {
6480 # There is no associated value.
6484 # main() startup implementations
6485 # Implementations of this interface arrange for a user-supplied
6486 # main() to be called in an ISO compatible environment.
6488 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6489 # No options implement this inferface
6490 # This value cannot be modified here.
6493 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6494 # CYGINT_ISO_MAIN_STARTUP == 0
6497 # The following properties are affected by this value
6498 # interface CYGINT_ISO_MAIN_STARTUP
6499 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6502 # environ implementations
6503 # Implementations of this interface provide the environ
6504 # variable required by POSIX.
6506 cdl_interface CYGINT_ISO_ENVIRON {
6507 # No options implement this inferface
6508 # This value cannot be modified here.
6511 # Requires: 1 >= CYGINT_ISO_ENVIRON
6512 # CYGINT_ISO_ENVIRON == 0
6515 # The following properties are affected by this value
6516 # interface CYGINT_ISO_ENVIRON
6517 # Requires: 1 >= CYGINT_ISO_ENVIRON
6523 cdl_component CYGPKG_ISO_CTYPE_H {
6524 # There is no associated value.
6528 # Number of implementations of ctype functions
6530 cdl_interface CYGINT_ISO_CTYPE {
6531 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6532 # This value cannot be modified here.
6535 # Requires: 1 >= CYGINT_ISO_CTYPE
6536 # CYGINT_ISO_CTYPE == 1
6539 # The following properties are affected by this value
6540 # interface CYGINT_ISO_CTYPE
6541 # Requires: 1 >= CYGINT_ISO_CTYPE
6542 # package CYGPKG_HAL_ARM_TX37KARO
6543 # Requires: CYGINT_ISO_CTYPE
6544 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6545 # Requires: CYGINT_ISO_CTYPE
6546 # package CYGPKG_LIBC_STDLIB
6547 # Requires: CYGINT_ISO_CTYPE
6550 # Ctype implementation header
6552 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6554 # No user value, uncomment the following line to provide one.
6556 # The inferred value should not be edited directly.
6557 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6558 # value_source inferred
6559 # Default value: 0 0
6561 # The following properties are affected by this value
6562 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6563 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6564 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6565 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6571 cdl_component CYGPKG_ISO_ERRNO {
6572 # There is no associated value.
6576 # Number of implementations of error codes
6578 cdl_interface CYGINT_ISO_ERRNO_CODES {
6579 # Implemented by CYGPKG_ERROR, active, enabled
6580 # This value cannot be modified here.
6583 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6584 # CYGINT_ISO_ERRNO_CODES == 1
6587 # The following properties are affected by this value
6588 # interface CYGINT_ISO_ERRNO_CODES
6589 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6592 # Error codes implementation header
6594 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6596 # No user value, uncomment the following line to provide one.
6598 # The inferred value should not be edited directly.
6599 inferred_value 1 <cyg/error/codes.h>
6600 # value_source inferred
6601 # Default value: 0 0
6603 # The following properties are affected by this value
6604 # package CYGPKG_ERROR
6605 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6608 # Number of implementations of errno variable
6610 cdl_interface CYGINT_ISO_ERRNO {
6611 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6612 # This value cannot be modified here.
6615 # Requires: 1 >= CYGINT_ISO_ERRNO
6616 # CYGINT_ISO_ERRNO == 1
6619 # The following properties are affected by this value
6620 # interface CYGINT_ISO_ERRNO
6621 # Requires: 1 >= CYGINT_ISO_ERRNO
6624 # errno variable implementation header
6626 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6628 # No user value, uncomment the following line to provide one.
6630 # The inferred value should not be edited directly.
6631 inferred_value 1 <cyg/error/errno.h>
6632 # value_source inferred
6633 # Default value: 0 0
6635 # The following properties are affected by this value
6636 # component CYGPKG_ERROR_ERRNO
6637 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6641 # Locale-related functions
6643 cdl_component CYGPKG_ISO_LOCALE {
6644 # There is no associated value.
6648 # Number of implementations of locale functions
6650 cdl_interface CYGINT_ISO_LOCALE {
6651 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6652 # This value cannot be modified here.
6655 # Requires: 1 >= CYGINT_ISO_LOCALE
6656 # CYGINT_ISO_LOCALE == 1
6659 # The following properties are affected by this value
6660 # interface CYGINT_ISO_LOCALE
6661 # Requires: 1 >= CYGINT_ISO_LOCALE
6664 # Locale implementation header
6666 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6668 # No user value, uncomment the following line to provide one.
6670 # value_source default
6671 # Default value: 0 0
6675 # Standard I/O-related functionality
6677 cdl_component CYGPKG_ISO_STDIO {
6678 # There is no associated value.
6682 # Number of implementations of stdio file types
6684 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6685 # No options implement this inferface
6686 # This value cannot be modified here.
6688 # Current value: 0 0
6689 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6690 # CYGINT_ISO_STDIO_FILETYPES == 0
6693 # The following properties are affected by this value
6694 # interface CYGINT_ISO_STDIO_FILETYPES
6695 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6698 # Stdio file types implementation header
6700 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6702 # No user value, uncomment the following line to provide one.
6704 # value_source default
6705 # Default value: 0 0
6708 # Stdio standard streams implementations
6710 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6711 # No options implement this inferface
6712 # This value cannot be modified here.
6714 # Current value: 0 0
6715 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6716 # CYGINT_ISO_STDIO_STREAMS == 0
6719 # The following properties are affected by this value
6720 # interface CYGINT_ISO_STDIO_STREAMS
6721 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6724 # Stdio standard streams implementation header
6725 # This header file must define stdin, stdout
6728 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6730 # No user value, uncomment the following line to provide one.
6732 # value_source default
6733 # Default value: 0 0
6736 # Number of implementations of stdio file operations
6738 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6739 # No options implement this inferface
6740 # This value cannot be modified here.
6742 # Current value: 0 0
6743 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6744 # CYGINT_ISO_STDIO_FILEOPS == 0
6747 # The following properties are affected by this value
6748 # interface CYGINT_ISO_STDIO_FILEOPS
6749 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6752 # Stdio file operations implementation header
6753 # This header controls the file system operations on a file
6754 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6757 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6759 # No user value, uncomment the following line to provide one.
6761 # value_source default
6762 # Default value: 0 0
6765 # Number of implementations of stdio file access functionals
6767 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6768 # No options implement this inferface
6769 # This value cannot be modified here.
6771 # Current value: 0 0
6772 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6773 # CYGINT_ISO_STDIO_FILEACCESS == 0
6776 # The following properties are affected by this value
6777 # interface CYGINT_ISO_STDIO_FILEACCESS
6778 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6779 # option CYGFUN_COMPRESS_ZLIB_GZIO
6780 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6783 # Stdio file access implementation header
6784 # This header controls the file access operations
6785 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6786 # setvbuf(), and associated constants.
6788 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6790 # No user value, uncomment the following line to provide one.
6792 # value_source default
6793 # Default value: 0 0
6796 # Number of implementations of stdio formatted I/O
6798 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6799 # No options implement this inferface
6800 # This value cannot be modified here.
6802 # Current value: 0 0
6803 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6804 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6807 # The following properties are affected by this value
6808 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6809 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6810 # option CYGFUN_COMPRESS_ZLIB_GZIO
6811 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6814 # Stdio formatted I/O implementation header
6816 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6818 # No user value, uncomment the following line to provide one.
6820 # value_source default
6821 # Default value: 0 0
6824 # Number of implementations of stdio character I/O
6826 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6827 # No options implement this inferface
6828 # This value cannot be modified here.
6830 # Current value: 0 0
6831 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6832 # CYGINT_ISO_STDIO_CHAR_IO == 0
6835 # The following properties are affected by this value
6836 # interface CYGINT_ISO_STDIO_CHAR_IO
6837 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6840 # Stdio character I/O implementation header
6842 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6844 # No user value, uncomment the following line to provide one.
6846 # value_source default
6847 # Default value: 0 0
6850 # Number of implementations of stdio direct I/O
6852 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6853 # No options implement this inferface
6854 # This value cannot be modified here.
6856 # Current value: 0 0
6857 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6858 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6861 # The following properties are affected by this value
6862 # interface CYGINT_ISO_STDIO_DIRECT_IO
6863 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6866 # Stdio direct I/O implementation header
6868 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6870 # No user value, uncomment the following line to provide one.
6872 # value_source default
6873 # Default value: 0 0
6876 # Number of implementations of stdio file positioning
6878 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6879 # No options implement this inferface
6880 # This value cannot be modified here.
6882 # Current value: 0 0
6883 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6884 # CYGINT_ISO_STDIO_FILEPOS == 0
6887 # The following properties are affected by this value
6888 # interface CYGINT_ISO_STDIO_FILEPOS
6889 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6890 # option CYGFUN_COMPRESS_ZLIB_GZIO
6891 # Requires: CYGINT_ISO_STDIO_FILEPOS
6894 # Stdio file positioning implementation header
6896 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6898 # No user value, uncomment the following line to provide one.
6900 # value_source default
6901 # Default value: 0 0
6904 # Number of implementations of stdio error handling
6906 cdl_interface CYGINT_ISO_STDIO_ERROR {
6907 # No options implement this inferface
6908 # This value cannot be modified here.
6910 # Current value: 0 0
6911 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6912 # CYGINT_ISO_STDIO_ERROR == 0
6915 # The following properties are affected by this value
6916 # interface CYGINT_ISO_STDIO_ERROR
6917 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6920 # Stdio error handling implementation header
6922 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6924 # No user value, uncomment the following line to provide one.
6926 # value_source default
6927 # Default value: 0 0
6930 # POSIX fd-related function implementations
6932 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6933 # No options implement this inferface
6934 # This value cannot be modified here.
6936 # Current value: 0 0
6937 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6938 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6941 # The following properties are affected by this value
6942 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6943 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6946 # POSIX fd-related function implementation header
6948 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6950 # No user value, uncomment the following line to provide one.
6952 # value_source default
6953 # Default value: 0 0
6957 # Standard general utility functions
6959 cdl_component CYGPKG_ISO_STDLIB {
6960 # There is no associated value.
6964 # String conversion function implementations
6966 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
6967 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
6968 # This value cannot be modified here.
6971 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6972 # CYGINT_ISO_STDLIB_STRCONV == 1
6975 # The following properties are affected by this value
6976 # interface CYGINT_ISO_STDLIB_STRCONV
6977 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6980 # String conversion function implementation header
6982 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
6984 # No user value, uncomment the following line to provide one.
6986 # The inferred value should not be edited directly.
6987 inferred_value 1 <cyg/libc/stdlib/atox.inl>
6988 # value_source inferred
6989 # Default value: 0 0
6991 # The following properties are affected by this value
6992 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
6993 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
6996 # String to FP conversion function implementations
6998 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
6999 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7000 # This value cannot be modified here.
7003 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7004 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7007 # The following properties are affected by this value
7008 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7009 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7012 # String to FP conversion function implementation header
7014 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7016 # No user value, uncomment the following line to provide one.
7018 # value_source default
7019 # Default value: 0 0
7022 # Random number generator implementations
7024 cdl_interface CYGINT_ISO_RAND {
7025 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7026 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7027 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7028 # This value cannot be modified here.
7031 # Requires: 1 >= CYGINT_ISO_RAND
7032 # CYGINT_ISO_RAND == 1
7035 # The following properties are affected by this value
7036 # interface CYGINT_ISO_RAND
7037 # Requires: 1 >= CYGINT_ISO_RAND
7040 # Random number generator implementation header
7042 cdl_option CYGBLD_ISO_RAND_HEADER {
7044 # No user value, uncomment the following line to provide one.
7046 # value_source default
7047 # Default value: 0 0
7050 # Malloc implementations
7052 cdl_interface CYGINT_ISO_MALLOC {
7053 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7054 # This value cannot be modified here.
7057 # Requires: 1 >= CYGINT_ISO_MALLOC
7058 # CYGINT_ISO_MALLOC == 1
7061 # The following properties are affected by this value
7062 # interface CYGINT_ISO_MALLOC
7063 # Requires: 1 >= CYGINT_ISO_MALLOC
7064 # option CYGFUN_LIBC_STRING_STRDUP
7065 # ActiveIf: CYGINT_ISO_MALLOC
7068 # Malloc implementation header
7070 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7072 # No user value, uncomment the following line to provide one.
7074 # value_source default
7075 # Default value: 0 0
7078 # Mallinfo() implementations
7080 cdl_interface CYGINT_ISO_MALLINFO {
7081 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7082 # This value cannot be modified here.
7085 # Requires: 1 >= CYGINT_ISO_MALLINFO
7086 # CYGINT_ISO_MALLINFO == 1
7089 # The following properties are affected by this value
7090 # interface CYGINT_ISO_MALLINFO
7091 # Requires: 1 >= CYGINT_ISO_MALLINFO
7094 # Mallinfo() implementation header
7096 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7098 # No user value, uncomment the following line to provide one.
7100 # value_source default
7101 # Default value: 0 0
7104 # Program exit functionality implementations
7106 cdl_interface CYGINT_ISO_EXIT {
7107 # No options implement this inferface
7108 # This value cannot be modified here.
7111 # Requires: 1 >= CYGINT_ISO_EXIT
7112 # CYGINT_ISO_EXIT == 0
7115 # The following properties are affected by this value
7116 # interface CYGINT_ISO_EXIT
7117 # Requires: 1 >= CYGINT_ISO_EXIT
7118 # option CYGFUN_INFRA_DUMMY_ABORT
7119 # Requires: !CYGINT_ISO_EXIT
7120 # option CYGFUN_INFRA_DUMMY_ABORT
7121 # DefaultValue: CYGINT_ISO_EXIT == 0
7124 # Program exit functionality implementation header
7126 cdl_option CYGBLD_ISO_EXIT_HEADER {
7128 # No user value, uncomment the following line to provide one.
7130 # value_source default
7131 # Default value: 0 0
7134 # Program environment implementations
7136 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7137 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7138 # This value cannot be modified here.
7141 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7142 # CYGINT_ISO_STDLIB_ENVIRON == 1
7145 # The following properties are affected by this value
7146 # interface CYGINT_ISO_STDLIB_ENVIRON
7147 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7150 # Program environment implementation header
7152 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7154 # No user value, uncomment the following line to provide one.
7156 # value_source default
7157 # Default value: 0 0
7160 # system() implementations
7162 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7163 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7164 # This value cannot be modified here.
7167 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7168 # CYGINT_ISO_STDLIB_SYSTEM == 1
7171 # The following properties are affected by this value
7172 # interface CYGINT_ISO_STDLIB_SYSTEM
7173 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7176 # system() implementation header
7178 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7180 # No user value, uncomment the following line to provide one.
7182 # value_source default
7183 # Default value: 0 0
7186 # bsearch() implementations
7188 cdl_interface CYGINT_ISO_BSEARCH {
7189 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7190 # This value cannot be modified here.
7193 # Requires: 1 >= CYGINT_ISO_BSEARCH
7194 # CYGINT_ISO_BSEARCH == 1
7197 # The following properties are affected by this value
7198 # interface CYGINT_ISO_BSEARCH
7199 # Requires: 1 >= CYGINT_ISO_BSEARCH
7202 # bsearch() implementation header
7204 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7206 # No user value, uncomment the following line to provide one.
7208 # value_source default
7209 # Default value: 0 0
7212 # qsort() implementations
7214 cdl_interface CYGINT_ISO_QSORT {
7215 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7216 # This value cannot be modified here.
7219 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7220 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7223 # The following properties are affected by this value
7226 # qsort() implementation header
7228 cdl_option CYGBLD_ISO_QSORT_HEADER {
7230 # No user value, uncomment the following line to provide one.
7232 # value_source default
7233 # Default value: 0 0
7236 # abs()/labs() implementations
7238 cdl_interface CYGINT_ISO_ABS {
7239 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7240 # This value cannot be modified here.
7243 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7244 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7247 # The following properties are affected by this value
7250 # abs()/labs() implementation header
7252 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7254 # No user value, uncomment the following line to provide one.
7256 # The inferred value should not be edited directly.
7257 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7258 # value_source inferred
7259 # Default value: 0 0
7261 # The following properties are affected by this value
7262 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7263 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7266 # div()/ldiv() implementations
7268 cdl_interface CYGINT_ISO_DIV {
7269 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7270 # This value cannot be modified here.
7273 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7274 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7277 # The following properties are affected by this value
7280 # div()/ldiv() implementation header
7282 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7284 # No user value, uncomment the following line to provide one.
7286 # The inferred value should not be edited directly.
7287 inferred_value 1 <cyg/libc/stdlib/div.inl>
7288 # value_source inferred
7289 # Default value: 0 0
7291 # The following properties are affected by this value
7292 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7293 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7296 # Header defining the implementation's MB_CUR_MAX
7298 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7300 # No user value, uncomment the following line to provide one.
7302 # value_source default
7303 # Default value: 0 0
7305 # The following properties are affected by this value
7306 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7307 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7310 # Multibyte character implementations
7312 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7313 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7314 # This value cannot be modified here.
7317 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7318 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7321 # The following properties are affected by this value
7322 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7323 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7326 # Multibyte character implementation header
7328 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7330 # No user value, uncomment the following line to provide one.
7332 # value_source default
7333 # Default value: 0 0
7339 cdl_component CYGPKG_ISO_STRING {
7340 # There is no associated value.
7344 # Number of implementations of strerror() function
7346 cdl_interface CYGINT_ISO_STRERROR {
7347 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7348 # This value cannot be modified here.
7350 # Current value: 1 1
7351 # Requires: 1 >= CYGINT_ISO_STRERROR
7352 # CYGINT_ISO_STRERROR == 1
7355 # The following properties are affected by this value
7356 # interface CYGINT_ISO_STRERROR
7357 # Requires: 1 >= CYGINT_ISO_STRERROR
7360 # strerror() implementation header
7362 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7364 # No user value, uncomment the following line to provide one.
7366 # The inferred value should not be edited directly.
7367 inferred_value 1 <cyg/error/strerror.h>
7368 # value_source inferred
7369 # Default value: 0 0
7371 # The following properties are affected by this value
7372 # option CYGPKG_ERROR_STRERROR
7373 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7376 # memcpy() implementation header
7378 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7380 # No user value, uncomment the following line to provide one.
7382 # value_source default
7383 # Default value: 0 0
7386 # memset() implementation header
7388 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7390 # No user value, uncomment the following line to provide one.
7392 # value_source default
7393 # Default value: 0 0
7396 # Number of implementations of strtok_r() function
7398 cdl_interface CYGINT_ISO_STRTOK_R {
7399 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7400 # This value cannot be modified here.
7402 # Current value: 1 1
7403 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7404 # CYGINT_ISO_STRTOK_R == 1
7407 # The following properties are affected by this value
7408 # interface CYGINT_ISO_STRTOK_R
7409 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7412 # strtok_r() implementation header
7414 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7416 # No user value, uncomment the following line to provide one.
7418 # The inferred value should not be edited directly.
7419 inferred_value 1 <cyg/libc/string/string.h>
7420 # value_source inferred
7421 # Default value: 0 0
7423 # The following properties are affected by this value
7424 # package CYGPKG_LIBC_STRING
7425 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7428 # Number of implementations of locale-specific string functions
7429 # This covers locale-dependent string functions such as strcoll()
7432 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7433 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7434 # This value cannot be modified here.
7436 # Current value: 1 1
7437 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7438 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7441 # The following properties are affected by this value
7442 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7443 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7446 # Locale-specific string functions' implementation header
7447 # This covers locale-dependent string functions such as strcoll()
7450 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7452 # No user value, uncomment the following line to provide one.
7454 # The inferred value should not be edited directly.
7455 inferred_value 1 <cyg/libc/string/string.h>
7456 # value_source inferred
7457 # Default value: 0 0
7459 # The following properties are affected by this value
7460 # package CYGPKG_LIBC_STRING
7461 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7464 # Number of implementations of BSD string functions
7466 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7467 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7468 # This value cannot be modified here.
7470 # Current value: 0 0
7471 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7472 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7475 # The following properties are affected by this value
7476 # interface CYGINT_ISO_STRING_BSD_FUNCS
7477 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7480 # BSD string functions' implementation header
7482 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7484 # No user value, uncomment the following line to provide one.
7486 # The inferred value should not be edited directly.
7487 inferred_value 1 <cyg/libc/string/bsdstring.h>
7488 # value_source inferred
7489 # Default value: 0 0
7491 # The following properties are affected by this value
7492 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7493 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7496 # Number of implementations of other mem*() functions
7498 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7499 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7500 # This value cannot be modified here.
7502 # Current value: 1 1
7503 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7504 # CYGINT_ISO_STRING_MEMFUNCS == 1
7507 # The following properties are affected by this value
7508 # interface CYGINT_ISO_STRING_MEMFUNCS
7509 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7510 # component CYGBLD_BUILD_REDBOOT
7511 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7512 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7513 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7516 # Other mem*() functions' implementation header
7518 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7520 # No user value, uncomment the following line to provide one.
7522 # The inferred value should not be edited directly.
7523 inferred_value 1 <cyg/libc/string/string.h>
7524 # value_source inferred
7525 # Default value: 0 0
7527 # The following properties are affected by this value
7528 # package CYGPKG_LIBC_STRING
7529 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7532 # Number of implementations of other ISO C str*() functions
7533 # This covers the other str*() functions defined by ISO C.
7535 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7536 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7537 # This value cannot be modified here.
7539 # Current value: 1 1
7540 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7541 # CYGINT_ISO_STRING_STRFUNCS == 1
7544 # The following properties are affected by this value
7545 # interface CYGINT_ISO_STRING_STRFUNCS
7546 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7547 # option CYGFUN_INFRA_DUMMY_STRLEN
7548 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7549 # option CYGFUN_INFRA_DUMMY_STRLEN
7550 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7551 # component CYGBLD_BUILD_REDBOOT
7552 # Requires: CYGINT_ISO_STRING_STRFUNCS
7553 # component CYGPKG_IO_ETH_DRIVERS_NET
7554 # Requires: CYGINT_ISO_STRING_STRFUNCS
7555 # option CYGFUN_COMPRESS_ZLIB_GZIO
7556 # Requires: CYGINT_ISO_STRING_STRFUNCS
7557 # package CYGPKG_IO_FLASH
7558 # Requires: CYGINT_ISO_STRING_STRFUNCS
7559 # package CYGPKG_LIBC_STDLIB
7560 # Requires: CYGINT_ISO_STRING_STRFUNCS
7563 # Other ISO C str*() functions' implementation header
7564 # This covers the other str*() functions defined by ISO C.
7566 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7568 # No user value, uncomment the following line to provide one.
7570 # The inferred value should not be edited directly.
7571 inferred_value 1 <cyg/libc/string/string.h>
7572 # value_source inferred
7573 # Default value: 0 0
7575 # The following properties are affected by this value
7576 # package CYGPKG_LIBC_STRING
7577 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7581 # Clock and time functionality
7583 cdl_component CYGPKG_ISO_TIME {
7584 # There is no associated value.
7588 # time_t implementation header
7590 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7592 # No user value, uncomment the following line to provide one.
7594 # value_source default
7595 # Default value: 0 0
7598 # clock_t implementation header
7600 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7602 # No user value, uncomment the following line to provide one.
7604 # value_source default
7605 # Default value: 0 0
7608 # struct timeval implementation header
7610 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7612 # No user value, uncomment the following line to provide one.
7614 # value_source default
7615 # Default value: 0 0
7618 # fnmatch implementation header
7620 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7622 # No user value, uncomment the following line to provide one.
7624 # value_source default
7625 # Default value: 0 0
7628 # Number of implementations of POSIX timer types
7630 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7631 # No options implement this inferface
7632 # This value cannot be modified here.
7634 # Current value: 0 0
7635 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7636 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7639 # The following properties are affected by this value
7640 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7641 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7644 # POSIX timer types implementation header
7646 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7648 # No user value, uncomment the following line to provide one.
7650 # value_source default
7651 # Default value: 0 0
7654 # Number of implementations of POSIX clock types
7656 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7657 # No options implement this inferface
7658 # This value cannot be modified here.
7660 # Current value: 0 0
7661 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7662 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7665 # The following properties are affected by this value
7666 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7667 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7670 # POSIX clock types implementation header
7672 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7674 # No user value, uncomment the following line to provide one.
7676 # value_source default
7677 # Default value: 0 0
7680 # Number of implementations of ISO C types
7682 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7683 # No options implement this inferface
7684 # This value cannot be modified here.
7686 # Current value: 0 0
7687 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7688 # CYGINT_ISO_C_TIME_TYPES == 0
7691 # The following properties are affected by this value
7692 # interface CYGINT_ISO_C_TIME_TYPES
7693 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7696 # ISO C time types implementation header
7698 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7700 # No user value, uncomment the following line to provide one.
7702 # value_source default
7703 # Default value: 0 0
7706 # Number of implementations of POSIX timers
7708 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7709 # No options implement this inferface
7710 # This value cannot be modified here.
7712 # Current value: 0 0
7713 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7714 # CYGINT_ISO_POSIX_TIMERS == 0
7717 # The following properties are affected by this value
7718 # interface CYGINT_ISO_POSIX_TIMERS
7719 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7722 # POSIX timer implementation header
7724 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7726 # No user value, uncomment the following line to provide one.
7728 # value_source default
7729 # Default value: 0 0
7732 # Number of implementations of POSIX clocks
7734 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7735 # No options implement this inferface
7736 # This value cannot be modified here.
7738 # Current value: 0 0
7739 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7740 # CYGINT_ISO_POSIX_CLOCKS == 0
7743 # The following properties are affected by this value
7744 # interface CYGINT_ISO_POSIX_CLOCKS
7745 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7748 # POSIX clocks implementation header
7750 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7752 # No user value, uncomment the following line to provide one.
7754 # value_source default
7755 # Default value: 0 0
7758 # Number of implementations of ISO C clock functions
7760 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7761 # No options implement this inferface
7762 # This value cannot be modified here.
7764 # Current value: 0 0
7765 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7766 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7769 # The following properties are affected by this value
7770 # interface CYGINT_ISO_C_CLOCK_FUNCS
7771 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7774 # ISO C clock functions' implementation header
7776 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7778 # No user value, uncomment the following line to provide one.
7780 # value_source default
7781 # Default value: 0 0
7784 # Number of implementations of tzset() function
7786 cdl_interface CYGINT_ISO_TZSET {
7787 # No options implement this inferface
7788 # This value cannot be modified here.
7790 # Current value: 0 0
7791 # Requires: 1 >= CYGINT_ISO_TZSET
7792 # CYGINT_ISO_TZSET == 0
7795 # The following properties are affected by this value
7796 # interface CYGINT_ISO_TZSET
7797 # Requires: 1 >= CYGINT_ISO_TZSET
7800 # tzset() implementation header
7802 cdl_option CYGBLD_ISO_TZSET_HEADER {
7804 # No user value, uncomment the following line to provide one.
7806 # value_source default
7807 # Default value: 0 0
7811 # Signal functionality
7813 cdl_component CYGPKG_ISO_SIGNAL {
7814 # There is no associated value.
7818 # Number of implementations of signal numbers
7820 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7821 # No options implement this inferface
7822 # This value cannot be modified here.
7825 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7826 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7829 # The following properties are affected by this value
7830 # interface CYGINT_ISO_SIGNAL_NUMBERS
7831 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7834 # Signal numbering implementation header
7835 # This header provides the mapping of signal
7836 # names (e.g. SIGBUS) to numbers.
7838 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7840 # No user value, uncomment the following line to provide one.
7842 # value_source default
7843 # Default value: 0 0
7846 # Number of signal implementations
7848 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7849 # No options implement this inferface
7850 # This value cannot be modified here.
7853 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7854 # CYGINT_ISO_SIGNAL_IMPL == 0
7857 # The following properties are affected by this value
7858 # interface CYGINT_ISO_SIGNAL_IMPL
7859 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7862 # Signals implementation header
7864 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7866 # No user value, uncomment the following line to provide one.
7868 # value_source default
7869 # Default value: 0 0
7872 # POSIX real time signals feature test macro
7873 # This defines the POSIX feature test macro
7874 # that indicates that the POSIX real time signals
7877 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7878 # No options implement this inferface
7879 # This value cannot be modified here.
7882 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7883 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7886 # The following properties are affected by this value
7887 # interface CYGINT_POSIX_REALTIME_SIGNALS
7888 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7892 # Non-local jumps functionality
7894 cdl_component CYGPKG_ISO_SETJMP {
7895 # There is no associated value.
7899 # setjmp() / longjmp() implementations
7901 cdl_interface CYGINT_ISO_SETJMP {
7902 # No options implement this inferface
7903 # This value cannot be modified here.
7906 # Requires: 1 >= CYGINT_ISO_SETJMP
7907 # CYGINT_ISO_SETJMP == 0
7910 # The following properties are affected by this value
7911 # interface CYGINT_ISO_SETJMP
7912 # Requires: 1 >= CYGINT_ISO_SETJMP
7915 # setjmp() / longjmp() implementation header
7917 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7919 # No user value, uncomment the following line to provide one.
7921 # value_source default
7922 # Default value: 0 0
7925 # sigsetjmp() / siglongjmp() implementations
7927 cdl_interface CYGINT_ISO_SIGSETJMP {
7928 # No options implement this inferface
7929 # This value cannot be modified here.
7932 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7933 # CYGINT_ISO_SIGSETJMP == 0
7936 # The following properties are affected by this value
7937 # interface CYGINT_ISO_SIGSETJMP
7938 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7941 # sigsetjmp() / siglongjmp() implementation header
7943 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7945 # No user value, uncomment the following line to provide one.
7947 # value_source default
7948 # Default value: 0 0
7952 # Assertions implementation header
7954 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7956 # No user value, uncomment the following line to provide one.
7958 # value_source default
7959 # Default value: 0 0
7962 # POSIX file control
7963 # This covers the POSIX file control definitions,
7964 # normally found in <fcntl.h>
7966 cdl_component CYGPKG_ISO_POSIX_FCNTL {
7967 # There is no associated value.
7971 # POSIX open flags implementation header
7973 cdl_option CYGBLD_ISO_OFLAG_HEADER {
7975 # No user value, uncomment the following line to provide one.
7977 # value_source default
7978 # Default value: 0 0
7981 # POSIX fcntl() implementations
7983 cdl_interface CYGINT_ISO_FCNTL {
7984 # No options implement this inferface
7985 # This value cannot be modified here.
7988 # Requires: 1 >= CYGINT_ISO_FCNTL
7989 # CYGINT_ISO_FCNTL == 0
7992 # The following properties are affected by this value
7993 # interface CYGINT_ISO_FCNTL
7994 # Requires: 1 >= CYGINT_ISO_FCNTL
7997 # POSIX fcntl() implementation header
7999 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8001 # No user value, uncomment the following line to provide one.
8003 # value_source default
8004 # Default value: 0 0
8007 # POSIX file open implementations
8009 cdl_interface CYGINT_ISO_OPEN {
8010 # No options implement this inferface
8011 # This value cannot be modified here.
8014 # Requires: 1 >= CYGINT_ISO_OPEN
8015 # CYGINT_ISO_OPEN == 0
8018 # The following properties are affected by this value
8019 # interface CYGINT_ISO_OPEN
8020 # Requires: 1 >= CYGINT_ISO_OPEN
8023 # POSIX file open implementation header
8025 cdl_option CYGBLD_ISO_OPEN_HEADER {
8027 # No user value, uncomment the following line to provide one.
8029 # value_source default
8030 # Default value: 0 0
8034 # <sys/stat.h> definitions implementation header
8036 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8038 # No user value, uncomment the following line to provide one.
8040 # value_source default
8041 # Default value: 0 0
8044 # POSIX directory reading implementation
8046 cdl_interface CYGINT_ISO_DIRENT {
8047 # No options implement this inferface
8048 # This value cannot be modified here.
8051 # Requires: 1 >= CYGINT_ISO_DIRENT
8052 # CYGINT_ISO_DIRENT == 0
8055 # The following properties are affected by this value
8056 # interface CYGINT_ISO_DIRENT
8057 # Requires: 1 >= CYGINT_ISO_DIRENT
8060 # <dirent.h> definitions implementation header
8062 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8064 # No user value, uncomment the following line to provide one.
8066 # value_source default
8067 # Default value: 0 0
8070 # POSIX <sys/types.h> contents
8071 # This covers the types required by POSIX to be in
8074 cdl_component CYGPKG_ISO_POSIX_TYPES {
8075 # There is no associated value.
8079 # POSIX thread types implementations
8081 cdl_interface CYGINT_ISO_PTHREADTYPES {
8082 # No options implement this inferface
8083 # This value cannot be modified here.
8086 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8087 # CYGINT_ISO_PTHREADTYPES == 0
8090 # The following properties are affected by this value
8091 # interface CYGINT_ISO_PTHREADTYPES
8092 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8093 # interface CYGINT_ISO_PMUTEXTYPES
8094 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8097 # POSIX thread types implementation header
8099 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8101 # No user value, uncomment the following line to provide one.
8103 # value_source default
8104 # Default value: 0 0
8107 # POSIX mutex types implementations
8109 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8110 # No options implement this inferface
8111 # This value cannot be modified here.
8114 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8115 # CYGINT_ISO_PTHREADTYPES == 0
8119 # POSIX mutex types implementation header
8121 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8123 # No user value, uncomment the following line to provide one.
8125 # value_source default
8126 # Default value: 0 0
8129 # ssize_t implementation header
8131 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8133 # No user value, uncomment the following line to provide one.
8135 # value_source default
8136 # Default value: 0 0
8139 # Filesystem types implementation header
8141 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8143 # No user value, uncomment the following line to provide one.
8145 # value_source default
8146 # Default value: 0 0
8149 # gid_t, pid_t, uid_t implementation header
8151 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8153 # No user value, uncomment the following line to provide one.
8155 # value_source default
8156 # Default value: 0 0
8160 # Non-POSIX <sys/types.h> contents
8161 # This covers the extra types required by non-POSIX
8162 # packages to be in <sys/types.h>. These would normally
8163 # only be visible if _POSIX_SOURCE is not defined.
8165 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8166 # There is no associated value.
8170 # BSD compatible types
8172 cdl_interface CYGINT_ISO_BSDTYPES {
8173 # No options implement this inferface
8174 # This value cannot be modified here.
8177 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8178 # CYGINT_ISO_BSDTYPES == 0
8181 # The following properties are affected by this value
8182 # interface CYGINT_ISO_BSDTYPES
8183 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8188 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8190 # No user value, uncomment the following line to provide one.
8192 # value_source default
8193 # Default value: 0 0
8199 cdl_component CYGPKG_ISO_UTSNAME {
8200 # There is no associated value.
8206 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8208 # No user value, uncomment the following line to provide one.
8210 # value_source default
8211 # Default value: 0 0
8217 cdl_component CYGPKG_ISO_SCHED {
8218 # There is no associated value.
8222 # POSIX scheduler implementations
8224 cdl_interface CYGINT_ISO_SCHED_IMPL {
8225 # No options implement this inferface
8226 # This value cannot be modified here.
8229 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8230 # CYGINT_ISO_SCHED_IMPL == 0
8233 # The following properties are affected by this value
8234 # interface CYGINT_ISO_SCHED_IMPL
8235 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8238 # POSIX scheduler implementation header
8240 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8242 # No user value, uncomment the following line to provide one.
8244 # value_source default
8245 # Default value: 0 0
8251 cdl_component CYGPKG_ISO_SEMAPHORES {
8252 # There is no associated value.
8256 # POSIX semaphore implementations
8258 cdl_interface CYGINT_ISO_SEMAPHORES {
8259 # No options implement this inferface
8260 # This value cannot be modified here.
8263 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8264 # CYGINT_ISO_SEMAPHORES == 0
8267 # The following properties are affected by this value
8268 # interface CYGINT_ISO_SEMAPHORES
8269 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8272 # POSIX semaphore implementation header
8274 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8276 # No user value, uncomment the following line to provide one.
8278 # value_source default
8279 # Default value: 0 0
8283 # POSIX message queues
8285 cdl_component CYGPKG_ISO_MQUEUE {
8286 # There is no associated value.
8292 cdl_interface CYGINT_ISO_MQUEUE {
8293 # No options implement this inferface
8294 # This value cannot be modified here.
8297 # Requires: 1 >= CYGINT_ISO_MQUEUE
8298 # CYGINT_ISO_MQUEUE == 0
8301 # The following properties are affected by this value
8302 # interface CYGINT_ISO_MQUEUE
8303 # Requires: 1 >= CYGINT_ISO_MQUEUE
8304 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8305 # ActiveIf: CYGINT_ISO_MQUEUE
8306 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8307 # ActiveIf: CYGINT_ISO_MQUEUE
8310 # Implementation header
8312 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8314 # No user value, uncomment the following line to provide one.
8316 # value_source default
8317 # Default value: 0 0
8320 # Maximum number of open message queues
8322 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8323 # This option is not active
8324 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8325 # CYGINT_ISO_MQUEUE == 0
8329 # No user value, uncomment the following line to provide one.
8331 # value_source default
8332 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8333 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8334 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8338 # Maximum number of message priorities
8340 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8341 # This option is not active
8342 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8343 # CYGINT_ISO_MQUEUE == 0
8347 # No user value, uncomment the following line to provide one.
8348 # user_value 1 65535
8349 # value_source default
8350 # Default value: 1 65535
8356 cdl_component CYGPKG_ISO_PTHREAD {
8357 # There is no associated value.
8361 # POSIX pthread implementations
8363 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8364 # No options implement this inferface
8365 # This value cannot be modified here.
8367 # Current value: 0 0
8368 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8369 # CYGINT_ISO_PTHREAD_IMPL == 0
8372 # The following properties are affected by this value
8373 # interface CYGINT_ISO_PTHREAD_IMPL
8374 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8377 # POSIX pthread implementation header
8379 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8381 # No user value, uncomment the following line to provide one.
8383 # value_source default
8384 # Default value: 0 0
8387 # POSIX mutex/cond var implementations
8389 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8390 # No options implement this inferface
8391 # This value cannot be modified here.
8393 # Current value: 0 0
8394 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8395 # CYGINT_ISO_PTHREAD_MUTEX == 0
8398 # The following properties are affected by this value
8399 # interface CYGINT_ISO_PTHREAD_MUTEX
8400 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8403 # POSIX mutex/cond var implementation header
8405 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8407 # No user value, uncomment the following line to provide one.
8409 # value_source default
8410 # Default value: 0 0
8416 cdl_component CYGPKG_ISO_LIMITS {
8417 # There is no associated value.
8421 # POSIX pthread limits implementations
8423 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8424 # No options implement this inferface
8425 # This value cannot be modified here.
8428 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8429 # CYGINT_ISO_POSIX_LIMITS == 0
8432 # The following properties are affected by this value
8433 # interface CYGINT_ISO_POSIX_LIMITS
8434 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8437 # POSIX pthread limits implementation header
8439 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8441 # No user value, uncomment the following line to provide one.
8443 # value_source default
8444 # Default value: 0 0
8447 # OPEN_MAX implementation header
8449 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8451 # No user value, uncomment the following line to provide one.
8453 # value_source default
8454 # Default value: 0 0
8457 # LINK_MAX implementation header
8459 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8461 # No user value, uncomment the following line to provide one.
8463 # value_source default
8464 # Default value: 0 0
8467 # NAME_MAX implementation header
8469 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8471 # No user value, uncomment the following line to provide one.
8473 # value_source default
8474 # Default value: 0 0
8477 # PATH_MAX implementation header
8479 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8481 # No user value, uncomment the following line to provide one.
8483 # value_source default
8484 # Default value: 0 0
8490 cdl_component CYGPKG_ISO_TERMIOS {
8491 # There is no associated value.
8495 # POSIX termios implementations
8497 cdl_interface CYGINT_ISO_TERMIOS {
8498 # No options implement this inferface
8499 # This value cannot be modified here.
8502 # Requires: 1 >= CYGINT_ISO_TERMIOS
8503 # CYGINT_ISO_TERMIOS == 0
8506 # The following properties are affected by this value
8507 # interface CYGINT_ISO_TERMIOS
8508 # Requires: 1 >= CYGINT_ISO_TERMIOS
8511 # POSIX termios implementation header
8513 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8515 # No user value, uncomment the following line to provide one.
8517 # value_source default
8518 # Default value: 0 0
8524 cdl_component CYGPKG_ISO_DLFCN {
8525 # There is no associated value.
8529 # Dynamic load implementations
8531 cdl_interface CYGINT_ISO_DLFCN {
8532 # No options implement this inferface
8533 # This value cannot be modified here.
8536 # Requires: 1 >= CYGINT_ISO_DLFCN
8537 # CYGINT_ISO_DLFCN == 0
8540 # The following properties are affected by this value
8541 # interface CYGINT_ISO_DLFCN
8542 # Requires: 1 >= CYGINT_ISO_DLFCN
8545 # Dynamic load implementation header
8547 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8549 # No user value, uncomment the following line to provide one.
8551 # value_source default
8552 # Default value: 0 0
8556 # UNIX standard functions
8558 cdl_component CYGPKG_ISO_UNISTD {
8559 # There is no associated value.
8563 # POSIX timer operations implementations
8565 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8566 # No options implement this inferface
8567 # This value cannot be modified here.
8569 # Current value: 0 0
8570 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8571 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8574 # The following properties are affected by this value
8575 # interface CYGINT_ISO_POSIX_TIMER_OPS
8576 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8579 # POSIX timer operations implementation header
8581 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8583 # No user value, uncomment the following line to provide one.
8585 # value_source default
8586 # Default value: 0 0
8589 # POSIX sleep() implementations
8591 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8592 # No options implement this inferface
8593 # This value cannot be modified here.
8595 # Current value: 0 0
8596 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8597 # CYGINT_ISO_POSIX_SLEEP == 0
8600 # The following properties are affected by this value
8601 # interface CYGINT_ISO_POSIX_SLEEP
8602 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8605 # POSIX sleep() implementation header
8607 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8609 # No user value, uncomment the following line to provide one.
8611 # value_source default
8612 # Default value: 0 0
8616 # select()/poll() functions
8618 cdl_component CYGPKG_ISO_SELECT {
8619 # There is no associated value.
8623 # select() implementations
8625 cdl_interface CYGINT_ISO_SELECT {
8626 # No options implement this inferface
8627 # This value cannot be modified here.
8629 # Current value: 0 0
8630 # Requires: 1 >= CYGINT_ISO_SELECT
8631 # CYGINT_ISO_SELECT == 0
8634 # The following properties are affected by this value
8635 # interface CYGINT_ISO_SELECT
8636 # Requires: 1 >= CYGINT_ISO_SELECT
8639 # select() implementation header
8641 cdl_option CYGBLD_ISO_SELECT_HEADER {
8643 # No user value, uncomment the following line to provide one.
8645 # value_source default
8646 # Default value: 0 0
8649 # poll() implementations
8651 cdl_interface CYGINT_ISO_POLL {
8652 # No options implement this inferface
8653 # This value cannot be modified here.
8655 # Current value: 0 0
8656 # Requires: 1 >= CYGINT_ISO_POLL
8657 # CYGINT_ISO_POLL == 0
8660 # The following properties are affected by this value
8661 # interface CYGINT_ISO_POLL
8662 # Requires: 1 >= CYGINT_ISO_POLL
8665 # poll() implementation header
8667 cdl_option CYGBLD_ISO_POLL_HEADER {
8669 # No user value, uncomment the following line to provide one.
8671 # value_source default
8672 # Default value: 0 0
8676 # NetDB utility functions
8678 cdl_component CYGPKG_ISO_NETDB {
8679 # There is no associated value.
8683 # DNS implementations
8685 cdl_interface CYGINT_ISO_DNS {
8686 # No options implement this inferface
8687 # This value cannot be modified here.
8690 # Requires: 1 >= CYGINT_ISO_DNS
8691 # CYGINT_ISO_DNS == 0
8694 # The following properties are affected by this value
8695 # interface CYGINT_ISO_DNS
8696 # Requires: 1 >= CYGINT_ISO_DNS
8699 # DNS implementation header
8701 cdl_option CYGBLD_ISO_DNS_HEADER {
8703 # No user value, uncomment the following line to provide one.
8705 # value_source default
8706 # Default value: 0 0
8709 # Protocol network database implementations
8711 cdl_interface CYGINT_ISO_NETDB_PROTO {
8712 # No options implement this inferface
8713 # This value cannot be modified here.
8716 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8717 # CYGINT_ISO_NETDB_PROTO == 0
8720 # The following properties are affected by this value
8721 # interface CYGINT_ISO_NETDB_PROTO
8722 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8725 # Protocol network database implementation header
8727 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8729 # No user value, uncomment the following line to provide one.
8731 # value_source default
8732 # Default value: 0 0
8735 # Services network database implementations
8737 cdl_interface CYGINT_ISO_NETDB_SERV {
8738 # No options implement this inferface
8739 # This value cannot be modified here.
8742 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8743 # CYGINT_ISO_NETDB_SERV == 0
8746 # The following properties are affected by this value
8747 # interface CYGINT_ISO_NETDB_SERV
8748 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8751 # Services network database implementation header
8753 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8755 # No user value, uncomment the following line to provide one.
8757 # value_source default
8758 # Default value: 0 0
8763 # Package specific build options including control over
8764 # compiler flags used only in building this package,
8765 # and details of which tests are built.
8767 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8768 # There is no associated value.
8772 # Additional compiler flags
8773 # This option modifies the set of compiler flags for
8774 # building the ISO C and POSIX infrastructure package.
8775 # These flags are used in addition to the set of global flags.
8777 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8779 # No user value, uncomment the following line to provide one.
8781 # value_source default
8785 # Suppressed compiler flags
8786 # This option modifies the set of compiler flags for
8787 # building the ISO C and POSIX infrastructure package.
8788 # These flags are removed from the set of global flags
8791 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8793 # No user value, uncomment the following line to provide one.
8795 # value_source default
8802 # doc: ref/services-crc.html
8803 # This package provides support for CRC calculation. Currently
8804 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8805 # Gary S. Brown, and a 16 bit CRC.
8807 cdl_package CYGPKG_CRC {
8808 # Packages cannot be added or removed, nor can their version be changed,
8809 # simply by editing their value. Instead the appropriate configuration
8810 # should be used to perform these actions.
8812 # This value cannot be modified here.
8814 # Current value: 1 current
8816 # The following properties are affected by this value
8817 # package CYGPKG_COMPRESS_ZLIB
8818 # Requires: CYGPKG_CRC
8824 cdl_option CYGPKG_CRC_TESTS {
8825 # Calculated value: "tests/crc_test"
8827 # Current_value: tests/crc_test
8831 # Zlib compress and decompress package
8832 # This package provides support for compression and
8835 cdl_package CYGPKG_COMPRESS_ZLIB {
8836 # Packages cannot be added or removed, nor can their version be changed,
8837 # simply by editing their value. Instead the appropriate configuration
8838 # should be used to perform these actions.
8840 # This value cannot be modified here.
8842 # Current value: 1 current
8843 # Requires: CYGPKG_ISOINFRA
8844 # CYGPKG_ISOINFRA == current
8846 # Requires: CYGPKG_CRC
8847 # CYGPKG_CRC == current
8850 # The following properties are affected by this value
8851 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8852 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8856 # Override memory allocation routines.
8858 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8859 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8860 # This value cannot be modified here.
8864 # The following properties are affected by this value
8865 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8866 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8869 # Should deflate() produce 'gzip' compatible output?
8870 # If this option is set then the output of calling deflate()
8871 # will be wrapped up as a 'gzip' compatible file.
8873 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8875 # No user value, uncomment the following line to provide one.
8877 # value_source default
8881 # Does this library need malloc?
8882 # This pseudo-option will force the memalloc library to be
8883 # required iff the application does not provide it's own
8886 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8887 # This option is not active
8888 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8889 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8893 # No user value, uncomment the following line to provide one.
8895 # value_source default
8897 # Requires: CYGPKG_MEMALLOC
8898 # CYGPKG_MEMALLOC == current
8902 # Include stdio-like utility functions
8903 # This option enables the stdio-like zlib utility functions
8904 # (gzread/gzwrite and friends) provided in gzio.c.
8906 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8908 # No user value, uncomment the following line to provide one.
8910 # value_source default
8911 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8912 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8914 # Requires: CYGINT_ISO_STDIO_FILEPOS
8915 # CYGINT_ISO_STDIO_FILEPOS == 0
8917 # Requires: CYGINT_ISO_STRING_STRFUNCS
8918 # CYGINT_ISO_STRING_STRFUNCS == 1
8920 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8921 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8923 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8924 # CYGINT_ISO_STDIO_FILEACCESS == 0
8928 # Zlib compress and decompress package build options
8929 # Package specific build options including control over
8930 # compiler flags used only in building this package,
8931 # and details of which tests are built.
8933 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8934 # There is no associated value.
8938 # Additional compiler flags
8939 # This option modifies the set of compiler flags for
8940 # building this package. These flags are used in addition
8941 # to the set of global flags.
8943 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8945 # No user value, uncomment the following line to provide one.
8946 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8947 # value_source default
8948 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8951 # Suppressed compiler flags
8952 # This option modifies the set of compiler flags for
8953 # building this package. These flags are removed from
8954 # the set of global flags if present.
8956 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8958 # No user value, uncomment the following line to provide one.
8959 # user_value -Wstrict-prototypes
8960 # value_source default
8961 # Default value: -Wstrict-prototypes
8964 # Additional compiler flags
8965 # This option modifies the set of compiler flags for
8966 # building this package. These flags are used in addition
8967 # to the set of global flags.
8969 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
8971 # No user value, uncomment the following line to provide one.
8973 # value_source default
8977 # Suppressed compiler flags
8978 # This option modifies the set of compiler flags for
8979 # building this package. These flags are removed from
8980 # the set of global flags if present.
8982 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
8984 # No user value, uncomment the following line to provide one.
8986 # value_source default
8993 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
8994 # Calculated value: "tests/zlib1.c tests/zlib2.c"
8996 # Current_value: tests/zlib1.c tests/zlib2.c
9000 # FLASH device drivers
9001 # doc: ref/flash.html
9002 # This option enables drivers for basic I/O services on
9005 cdl_package CYGPKG_IO_FLASH {
9006 # Packages cannot be added or removed, nor can their version be changed,
9007 # simply by editing their value. Instead the appropriate configuration
9008 # should be used to perform these actions.
9010 # This value cannot be modified here.
9012 # Current value: 1 current
9013 # Requires: CYGPKG_ISOINFRA
9014 # CYGPKG_ISOINFRA == current
9016 # Requires: CYGINT_ISO_STRING_STRFUNCS
9017 # CYGINT_ISO_STRING_STRFUNCS == 1
9020 # The following properties are affected by this value
9021 # component CYGSEM_REDBOOT_FLASH_CONFIG
9022 # DefaultValue: CYGPKG_IO_FLASH != 0
9023 # package CYGPKG_DEVS_FLASH_ONMXC
9024 # ActiveIf: CYGPKG_IO_FLASH
9028 # Hardware FLASH device drivers
9029 # This option enables the hardware device drivers
9030 # for the current platform.
9032 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9033 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9034 # This value cannot be modified here.
9038 # The following properties are affected by this value
9039 # component CYGPKG_REDBOOT_FLASH
9040 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9043 # Hardware FLASH device drivers are not in RAM
9044 # Use of this interface is deprecated.
9045 # Drivers should make sure that the functions are
9046 # linked to RAM by putting them in .2ram sections.
9048 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9049 # No options implement this inferface
9050 # This value cannot be modified here.
9052 # Current value: 0 0
9053 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9054 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9057 # The following properties are affected by this value
9058 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9059 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9062 # Hardware can support block locking
9063 # This option will be enabled by devices which can support
9064 # locking (write-protection) of individual blocks.
9066 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9067 # No options implement this inferface
9068 # This value cannot be modified here.
9070 # Current value: 0 0
9072 # The following properties are affected by this value
9073 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9074 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9077 # Hardware cannot support direct access to FLASH memory
9078 # This option will be asserted by devices which cannot support
9079 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9080 # devices). In these cases, the driver must provide an appropriate
9081 # hardware access function.
9083 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9085 # No user value, uncomment the following line to provide one.
9087 # The inferred value should not be edited directly.
9089 # value_source inferred
9091 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9092 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9095 # The following properties are affected by this value
9096 # option CYGPRI_REDBOOT_ZLIB_FLASH
9097 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9098 # component CYGHWR_DEVS_FLASH_MMC
9099 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9100 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9101 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9102 # option CYGHWR_DEVS_FLASH_MMC_SD
9103 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9104 # option CYGHWR_DEVS_FLASH_MXC_NAND
9105 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9108 # Display status messages during flash operations
9109 # Selecting this option will cause the drivers to print status
9110 # messages as various flash operations are undertaken.
9112 cdl_option CYGSEM_IO_FLASH_CHATTER {
9114 # No user value, uncomment the following line to provide one.
9116 # value_source default
9120 # Verify data programmed to flash
9121 # Selecting this option will cause verification of data
9122 # programmed to flash.
9124 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9126 # No user value, uncomment the following line to provide one.
9128 # The inferred value should not be edited directly.
9130 # value_source inferred
9133 # The following properties are affected by this value
9134 # option CYGSEM_IO_FLASH_READ_INDIRECT
9135 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9138 # Platform has flash soft DIP switch write-protect
9139 # Selecting this option will cause the state of a hardware jumper or
9140 # dipswitch to be read by software to determine whether the flash is
9141 # write-protected or not.
9143 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9145 # No user value, uncomment the following line to provide one.
9147 # value_source default
9151 # Instantiate in I/O block device API
9152 # Provides a block device accessible using the standard I/O
9153 # API ( cyg_io_read() etc. )
9155 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9156 # This option is not active
9157 # ActiveIf constraint: CYGPKG_IO
9158 # CYGPKG_IO (unknown) == 0
9162 # No user value, uncomment the following line to provide one.
9164 # value_source default
9169 # Name of flash device 1 block device
9171 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9172 # This option is not active
9173 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9174 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9177 # No user value, uncomment the following line to provide one.
9178 # user_value "\"/dev/flash1\""
9179 # value_source default
9180 # Default value: "\"/dev/flash1\""
9185 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9186 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9187 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9188 # This option is not active
9189 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9191 # This value cannot be modified here.
9194 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9195 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9198 # The following properties are affected by this value
9199 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9200 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9203 # Static configuration
9204 # This configures the flash device 1 block device
9205 # with static base and length
9207 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9208 # This option is not active
9209 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9212 # No user value, uncomment the following line to provide one.
9214 # value_source default
9219 # Start offset from flash base
9220 # This gives the offset from the base of flash which this
9221 # block device corresponds to.
9223 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9224 # This option is not active
9225 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9228 # No user value, uncomment the following line to provide one.
9229 # user_value 0x00100000
9230 # value_source default
9231 # Default value: 0x00100000
9235 # This gives the length of the region of flash given over
9236 # to this block device.
9238 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9239 # This option is not active
9240 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9243 # No user value, uncomment the following line to provide one.
9244 # user_value 0x00100000
9245 # value_source default
9246 # Default value: 0x00100000
9250 # Configuration from FIS
9251 # This configures the flash device 1 block device
9254 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9255 # This option is not active
9256 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9259 # No user value, uncomment the following line to provide one.
9261 # value_source default
9268 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9269 # This option is not active
9270 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9271 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9274 # No user value, uncomment the following line to provide one.
9275 # user_value "\"jffs2\""
9276 # value_source default
9277 # Default value: "\"jffs2\""
9283 # Flash device driver build options
9284 # Package specific build options including control over
9285 # compiler flags used only in building this package,
9286 # and details of which tests are built.
9288 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9289 # There is no associated value.
9293 # Additional compiler flags
9294 # This option modifies the set of compiler flags for
9295 # building the flash device drivers. These flags are used in addition
9296 # to the set of global flags.
9298 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9300 # No user value, uncomment the following line to provide one.
9302 # value_source default
9306 # Suppressed compiler flags
9307 # This option modifies the set of compiler flags for
9308 # building the flash device drivers. These flags are removed from
9309 # the set of global flags if present.
9311 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9313 # No user value, uncomment the following line to provide one.
9315 # value_source default
9319 # Flash device driver tests
9320 # This option specifies the set of tests for the flash device drivers.
9322 cdl_component CYGPKG_IO_FLASH_TESTS {
9323 # Calculated value: "tests/flash1"
9325 # Current_value: tests/flash1
9329 # Start offset from flash base
9330 # This gives the offset from the base of flash where tests
9331 # can be run. It is important to set this correctly, as an
9332 # incorrect value could allow the tests to write over critical
9333 # portions of the FLASH device and possibly render the target
9334 # board totally non-functional.
9336 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9338 # No user value, uncomment the following line to provide one.
9339 # user_value 0x00100000
9340 # value_source default
9341 # Default value: 0x00100000
9345 # This gives the length of the region of flash used for testing.
9347 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9349 # No user value, uncomment the following line to provide one.
9350 # user_value 0x00100000
9351 # value_source default
9352 # Default value: 0x00100000
9357 # Support FLASH memory on Freescale MXC platforms
9359 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9360 # Packages cannot be added or removed, nor can their version be changed,
9361 # simply by editing their value. Instead the appropriate configuration
9362 # should be used to perform these actions.
9364 # ActiveIf constraint: CYGPKG_IO_FLASH
9365 # CYGPKG_IO_FLASH == current
9368 # This value cannot be modified here.
9370 # Current value: 1 current
9374 # MXC platform MMC card support
9375 # When this option is enabled, it indicates MMC card is
9376 # supported on the MXC platforms
9378 cdl_component CYGHWR_DEVS_FLASH_MMC {
9380 # No user value, uncomment the following line to provide one.
9382 # value_source default
9384 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9385 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9388 # The following properties are affected by this value
9389 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9390 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9391 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9392 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9393 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9394 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9395 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9396 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9400 # MXC platform MMC card for newer SDHC controllers
9402 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9403 # This option is not active
9404 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9405 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9406 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9407 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9408 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9409 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9413 # No user value, uncomment the following line to provide one.
9415 # value_source default
9417 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9418 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9422 # MXC platform MMC card for older MMC/SD controllers
9424 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9425 # This option is not active
9426 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9427 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9428 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9429 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9433 # No user value, uncomment the following line to provide one.
9435 # value_source default
9437 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9438 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9443 # MXC platform NOR flash memory support
9444 # When this option is enabled, it indicates NOR flash is
9445 # supported on the MXC platforms
9447 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9449 # No user value, uncomment the following line to provide one.
9451 # The inferred value should not be edited directly.
9453 # value_source inferred
9456 # The following properties are affected by this value
9457 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9458 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9459 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9460 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9461 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9462 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9463 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9464 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9465 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9466 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9469 # MXC platform NAND flash memory support
9470 # When this option is enabled, it indicates NAND flash is
9471 # supported on the MXC platforms
9473 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9475 # No user value, uncomment the following line to provide one.
9477 # The inferred value should not be edited directly.
9479 # value_source inferred
9481 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9482 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9485 # The following properties are affected by this value
9486 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9487 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9488 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9489 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9490 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9491 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9492 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9493 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9494 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9495 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9496 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9497 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9500 # i.MX platform SPI NOR flash memory support
9501 # When this option is enabled, it indicates SPI NOR flash is
9502 # supported on the i.MX platforms
9504 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9506 # No user value, uncomment the following line to provide one.
9508 # value_source default
9510 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9511 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9515 # MXC platform ATA support
9516 # When this option is enabled, it indicates ATA is
9517 # supported on the MXC platforms
9519 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9521 # No user value, uncomment the following line to provide one.
9523 # value_source default
9527 # Use a flash based Bad Block Table
9529 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9530 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9531 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9534 # There is no associated value.
9538 # When this option is enabled, the driver will search for a flash
9539 # based bad block table
9541 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9543 # No user value, uncomment the following line to provide one.
9545 # value_source default
9549 # header file defining the NAND BBT descriptor
9550 # defines the name of the header file that describes the BBT layout
9552 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9554 # No user value, uncomment the following line to provide one.
9556 # The inferred value should not be edited directly.
9557 inferred_value 1 <cyg/io/tx37_nand_bbt.h>
9558 # value_source inferred
9559 # Default value: 0 0
9562 # Number of blocks to reserve for BBT
9563 # Number of blocks to reserve for BBT
9565 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9567 # No user value, uncomment the following line to provide one.
9569 # value_source default
9574 # MXC platform multi flash memory support
9575 # When this option is enabled, it indicates multi flashes are
9576 # supported on the MXC platforms (like NAND and NOR)
9578 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9579 # This option is not active
9580 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9581 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9582 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9583 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9584 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9585 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9586 # CYGHWR_DEVS_FLASH_MMC == 0
9587 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9588 # CYGHWR_DEVS_FLASH_MMC == 0
9592 # No user value, uncomment the following line to provide one.
9594 # The inferred value should not be edited directly.
9596 # value_source inferred
9600 # MXC platform NAND flash reset workaround support
9601 # When this option is enabled, it indicates 0xFFFF is used for
9602 # the NAND reset command instead of 0xFF.
9604 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9605 # No options implement this inferface
9606 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9607 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9610 # This value cannot be modified here.
9617 # Dynamic memory allocation
9618 # doc: ref/memalloc.html
9619 # This package provides memory allocator infrastructure required for
9620 # dynamic memory allocators, including the ISO standard malloc
9621 # interface. It also contains some sample implementations.
9623 cdl_package CYGPKG_MEMALLOC {
9624 # Packages cannot be added or removed, nor can their version be changed,
9625 # simply by editing their value. Instead the appropriate configuration
9626 # should be used to perform these actions.
9628 # This value cannot be modified here.
9630 # Current value: 1 current
9632 # The following properties are affected by this value
9633 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9634 # Requires: CYGPKG_MEMALLOC
9638 # Memory allocator implementations
9639 # This component contains configuration options related to the
9640 # various memory allocators available.
9642 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9643 # There is no associated value.
9647 # Fixed block allocator
9648 # This component contains configuration options related to the
9649 # fixed block memory allocator.
9651 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9652 # There is no associated value.
9657 # With this option enabled, this allocator will be
9658 # made thread-safe. Additionally allocation functions
9659 # are made available that allow a thread to wait
9660 # until memory is available.
9662 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9663 # This option is not active
9664 # ActiveIf constraint: CYGPKG_KERNEL
9665 # CYGPKG_KERNEL (unknown) == 0
9669 # No user value, uncomment the following line to provide one.
9671 # value_source default
9676 # Simple variable block allocator
9677 # This component contains configuration options related to the
9678 # simple variable block memory allocator. This allocator is not
9679 # very fast, and in particular does not scale well with large
9680 # numbers of allocations. It is however very compact in terms of
9681 # code size and does not have very much overhead per allocation.
9683 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9684 # There is no associated value.
9689 # With this option enabled, this allocator will be
9690 # made thread-safe. Additionally allocation functions
9691 # are added that allow a thread to wait until memory
9692 # are made available that allow a thread to wait
9693 # until memory is available.
9695 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9696 # This option is not active
9697 # ActiveIf constraint: CYGPKG_KERNEL
9698 # CYGPKG_KERNEL (unknown) == 0
9702 # No user value, uncomment the following line to provide one.
9704 # value_source default
9709 # The variable-block memory allocator can perform coalescing
9710 # of memory whenever the application code releases memory back
9711 # to the pool. This coalescing reduces the possibility of
9712 # memory fragmentation problems, but involves extra code and
9715 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9717 # No user value, uncomment the following line to provide one.
9719 # value_source default
9722 # The following properties are affected by this value
9723 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9724 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9729 # This component contains configuration options related to the
9730 # port of Doug Lea's memory allocator, normally known as
9731 # dlmalloc. dlmalloc has a reputation for being both fast
9732 # and space-conserving, as well as resisting fragmentation well.
9733 # It is a common choice for a general purpose allocator and
9734 # has been used in both newlib and Linux glibc.
9736 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9737 # There is no associated value.
9742 # Doug Lea's malloc implementation has substantial amounts
9743 # of internal checking in order to verify the operation
9744 # and consistency of the allocator. However this imposes
9745 # substantial overhead on each operation. Therefore this
9746 # checking may be individually disabled.
9748 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9750 # No user value, uncomment the following line to provide one.
9752 # value_source default
9753 # Default value: 0 != CYGDBG_USE_ASSERTS
9754 # CYGDBG_USE_ASSERTS == 0
9756 # Requires: CYGDBG_USE_ASSERTS
9757 # CYGDBG_USE_ASSERTS == 0
9762 # With this option enabled, this allocator will be
9763 # made thread-safe. Additionally allocation functions
9764 # are made available that allow a thread to wait
9765 # until memory is available.
9767 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9768 # This option is not active
9769 # ActiveIf constraint: CYGPKG_KERNEL
9770 # CYGPKG_KERNEL (unknown) == 0
9774 # No user value, uncomment the following line to provide one.
9776 # value_source default
9778 # Requires: CYGPKG_KERNEL
9779 # CYGPKG_KERNEL (unknown) == 0
9783 # Support more than one instance
9784 # Having this option disabled allows important
9785 # implementation structures to be declared as a single
9786 # static instance, allowing faster access. However this
9787 # would fail if there is more than one instance of
9788 # the dlmalloc allocator class. Therefore this option can
9789 # be enabled if multiple instances are required. Note: as
9790 # a special case, if this allocator is used as the
9791 # implementation of malloc, and it can be determined there
9792 # is more than one malloc pool, then this option will be
9795 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9797 # No user value, uncomment the following line to provide one.
9799 # value_source default
9803 # Use system memmove() and memset()
9804 # This may be used to control whether memset() and memmove()
9805 # are used within the implementation. The alternative is
9806 # to use some macro equivalents, which some people report
9807 # are faster in some circumstances.
9809 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9811 # No user value, uncomment the following line to provide one.
9813 # value_source default
9814 # Default value: 0 != CYGPKG_ISOINFRA
9815 # CYGPKG_ISOINFRA == current
9817 # Requires: CYGPKG_ISOINFRA
9818 # CYGPKG_ISOINFRA == current
9822 # Minimum alignment of allocated blocks
9823 # This option controls the minimum alignment that the
9824 # allocated memory blocks are aligned on, specified as
9825 # 2^N. Note that using large mininum alignments can lead
9826 # to excessive memory wastage.
9828 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9830 # No user value, uncomment the following line to provide one.
9832 # value_source default
9834 # Legal values: 3 to 10
9838 # Variable block allocator with separate metadata
9839 # This component contains configuration options related to the
9840 # variable block memory allocator with separate metadata.
9842 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9843 # There is no associated value.
9848 # With this option enabled, this allocator will be
9849 # made thread-safe. Additionally allocation functions
9850 # are made available that allow a thread to wait
9851 # until memory is available.
9853 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9854 # This option is not active
9855 # ActiveIf constraint: CYGPKG_KERNEL
9856 # CYGPKG_KERNEL (unknown) == 0
9860 # No user value, uncomment the following line to provide one.
9862 # value_source default
9868 # Kernel C API support for memory allocation
9869 # This option must be enabled to provide the extensions required
9870 # to support integration into the kernel C API.
9872 cdl_option CYGFUN_MEMALLOC_KAPI {
9873 # This option is not active
9874 # ActiveIf constraint: CYGPKG_KERNEL
9875 # CYGPKG_KERNEL (unknown) == 0
9879 # No user value, uncomment the following line to provide one.
9881 # value_source default
9882 # Default value: CYGFUN_KERNEL_API_C
9883 # CYGFUN_KERNEL_API_C (unknown) == 0
9887 # malloc(0) returns NULL
9888 # This option controls the behavior of malloc(0) ( or calloc with
9889 # either argument 0 ). It is permitted by the standard to return
9890 # either a NULL pointer or a unique pointer. Enabling this option
9891 # forces a NULL pointer to be returned.
9893 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9895 # No user value, uncomment the following line to provide one.
9897 # value_source default
9901 # Breakpoint site when running out of memory
9902 # Whenever the system runs out of memory, it invokes this function
9903 # before either going to sleep waiting for memory to become
9904 # available or returning failure.
9906 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9908 # No user value, uncomment the following line to provide one.
9910 # value_source default
9914 # malloc() and supporting allocators
9915 # This component enables support for dynamic memory
9916 # allocation as supplied by the functions malloc(),
9917 # free(), calloc() and realloc(). As these
9918 # functions are often used, but can have quite an
9919 # overhead, disabling them here can ensure they
9920 # cannot even be used accidentally when static
9921 # allocation is preferred. Within this component are
9922 # various allocators that can be selected for use
9923 # as the underlying implementation of the dynamic
9924 # allocation functions.
9926 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9927 # ActiveIf constraint: CYGPKG_ISOINFRA
9928 # CYGPKG_ISOINFRA == current
9932 # No user value, uncomment the following line to provide one.
9934 # value_source default
9939 # Use external heap definition
9940 # This option allows other components in the
9941 # system to override the default system
9942 # provision of heap memory pools. This should
9943 # be set to a header which provides the equivalent
9944 # definitions to <pkgconf/heaps.hxx>.
9946 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9948 # No user value, uncomment the following line to provide one.
9950 # value_source default
9951 # Default value: 0 0
9954 # Use external implementation of joining multiple heaps
9955 # The default implementation of joining multiple heaps
9956 # is fine for the case where there are multiple disjoint
9957 # memory regions of the same type. However, in a system
9958 # there might be e.g. a small amount of internal SRAM and
9959 # a large amount of external DRAM. The SRAM is faster and
9960 # the DRAM is slower. An application can implement some
9961 # heuristic to choose which pool to allocate from. This
9962 # heuristic can be highly application specific.
9964 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
9966 # No user value, uncomment the following line to provide one.
9968 # value_source default
9969 # Default value: 0 0
9972 # malloc() allocator implementations
9974 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
9975 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
9976 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
9977 # This value cannot be modified here.
9980 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9981 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9984 # The following properties are affected by this value
9985 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
9986 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9989 # malloc() implementation instantiation data
9990 # Memory allocator implementations that are capable of being
9991 # used underneath malloc() must be instantiated. The code
9992 # to do this is set in this option. It is only intended to
9993 # be set by the implementation, not the user.
9995 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
9997 # No user value, uncomment the following line to provide one.
9998 # user_value <cyg/memalloc/dlmalloc.hxx>
9999 # value_source default
10000 # Default value: <cyg/memalloc/dlmalloc.hxx>
10002 # The following properties are affected by this value
10003 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10004 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10005 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10006 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10009 # Simple variable block implementation
10010 # This causes malloc() to use the simple
10011 # variable block allocator.
10013 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10015 # No user value, uncomment the following line to provide one.
10017 # value_source default
10019 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10020 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10022 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10023 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10027 # Doug Lea's malloc implementation
10028 # This causes malloc() to use a version of Doug Lea's
10029 # malloc (dlmalloc) as the underlying implementation.
10031 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10033 # No user value, uncomment the following line to provide one.
10035 # value_source default
10037 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10038 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10043 # Size of the fallback dynamic memory pool in bytes
10044 # If *no* heaps are configured in your memory layout,
10045 # dynamic memory allocation by
10046 # malloc() and calloc() must be from a fixed-size,
10047 # contiguous memory pool (note here that it is the
10048 # pool that is of a fixed size, but malloc() is still
10049 # able to allocate variable sized chunks of memory
10050 # from it). This option is the size
10051 # of that pool, in bytes. Note that not all of
10052 # this is available for programs to
10053 # use - some is needed for internal information
10054 # about memory regions, and some may be lost to
10055 # ensure that memory allocation only returns
10056 # memory aligned on word (or double word)
10057 # boundaries - a very common architecture
10060 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10062 # No user value, uncomment the following line to provide one.
10064 # value_source default
10065 # Default value: 16384
10066 # Legal values: 32 to 0x7fffffff
10069 # Common memory allocator package build options
10070 # Package specific build options including control over
10071 # compiler flags used only in building this package,
10072 # and details of which tests are built.
10074 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10075 # There is no associated value.
10079 # Additional compiler flags
10080 # This option modifies the set of compiler flags for
10081 # building this package. These flags are used in addition
10082 # to the set of global flags.
10084 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10086 # No user value, uncomment the following line to provide one.
10087 # user_value "-fno-rtti -Woverloaded-virtual"
10088 # value_source default
10089 # Default value: "-fno-rtti -Woverloaded-virtual"
10092 # Suppressed compiler flags
10093 # This option modifies the set of compiler flags for
10094 # building this package. These flags are removed from
10095 # the set of global flags if present.
10097 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10099 # No user value, uncomment the following line to provide one.
10100 # user_value -Wno-pointer-sign
10101 # value_source default
10102 # Default value: -Wno-pointer-sign
10106 # This option specifies the set of tests for this package.
10108 cdl_option CYGPKG_MEMALLOC_TESTS {
10109 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10111 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10116 # Common error code support
10117 # This package contains the common list of error and
10118 # status codes. It is held centrally to allow
10119 # packages to interchange error codes and status
10120 # codes in a common way, rather than each package
10121 # having its own conventions for error/status
10122 # reporting. The error codes are modelled on the
10123 # POSIX style naming e.g. EINVAL etc. This package
10124 # also provides the standard strerror() function to
10125 # convert error codes to textual representation, as
10126 # well as an implementation of the errno idiom.
10128 cdl_package CYGPKG_ERROR {
10129 # Packages cannot be added or removed, nor can their version be changed,
10130 # simply by editing their value. Instead the appropriate configuration
10131 # should be used to perform these actions.
10133 # This value cannot be modified here.
10135 # Current value: 1 current
10136 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10137 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10143 # This package controls the behaviour of the
10144 # errno variable (or more strictly, expression)
10147 cdl_component CYGPKG_ERROR_ERRNO {
10149 # No user value, uncomment the following line to provide one.
10151 # value_source default
10153 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10154 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10160 # This option controls whether the standard error
10161 # code reporting variable errno is a per-thread
10162 # variable, rather than global.
10164 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10166 # No user value, uncomment the following line to provide one.
10168 # The inferred value should not be edited directly.
10170 # value_source inferred
10172 # Requires: CYGVAR_KERNEL_THREADS_DATA
10173 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10178 # Trace verbosity level for debugging the errno
10179 # retrieval mechanism in errno.cxx. Increase this
10180 # value to get additional trace output.
10182 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10184 # No user value, uncomment the following line to provide one.
10186 # value_source default
10188 # Legal values: 0 to 1
10192 # strerror function
10193 # This package controls the presence and behaviour of the
10194 # strerror() function from <string.h>
10196 cdl_option CYGPKG_ERROR_STRERROR {
10198 # No user value, uncomment the following line to provide one.
10200 # value_source default
10202 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10203 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10207 # Error package build options
10208 # Package specific build options including control over
10209 # compiler flags used only in building this package,
10210 # and details of which tests are built.
10212 cdl_component CYGPKG_ERROR_OPTIONS {
10213 # There is no associated value.
10217 # Additional compiler flags
10218 # This option modifies the set of compiler flags for
10219 # building the error package. These flags are used in addition
10220 # to the set of global flags.
10222 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10224 # No user value, uncomment the following line to provide one.
10226 # value_source default
10227 # Default value: ""
10230 # Suppressed compiler flags
10231 # This option modifies the set of compiler flags for
10232 # building the error package. These flags are removed from
10233 # the set of global flags if present.
10235 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10237 # No user value, uncomment the following line to provide one.
10239 # value_source default
10240 # Default value: ""