1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX51 current ;
34 package -hardware CYGPKG_HAL_ARM_TX51KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX51 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX51
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX51 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX51 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX51 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX51 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX51 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3108 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3109 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3110 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3114 # MX51 Tapeout 2.0 support
3115 # When this option is enabled, it indicates support for
3118 cdl_option CYGHWR_MX51_TO2 {
3120 # No user value, uncomment the following line to provide one.
3122 # value_source default
3126 # MX51 mDDR memory support
3127 # When this option is enabled, it indicates support for
3128 # mDDR memory on MX51
3130 cdl_option CYGHWR_MX51_MDDR {
3137 # Processor clock rate
3138 # The processor can run at various frequencies.
3139 # These values are expressed in KHz. Note that there are
3140 # several steppings of the rate to run at different
3141 # maximum frequencies. Check the specs to make sure that your
3142 # particular processor can run at the rate you select here.
3144 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3145 # This option is not active
3146 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3147 # CYG_HAL_STARTUP == ROMRAM
3151 # No user value, uncomment the following line to provide one.
3153 # value_source default
3154 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3155 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3156 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3157 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3159 # Legal values: 150000 200000
3162 # Real-time clock constants
3164 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3165 # There is no associated value.
3169 # Real-time clock numerator
3171 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3172 # Calculated value: 1000000000
3174 # Current_value: 1000000000
3177 # Real-time clock denominator
3178 # This option selects the heartbeat rate for the real-time clock.
3179 # The rate is specified in ticks per second. Change this value
3180 # with caution - too high and your system will become saturated
3181 # just handling clock interrupts, too low and some operations
3182 # such as thread scheduling may become sluggish.
3184 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3186 # No user value, uncomment the following line to provide one.
3188 # value_source default
3189 # Default value: 100
3191 # The following properties are affected by this value
3192 # option CYGNUM_HAL_RTC_PERIOD
3193 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3196 # Real-time clock period
3198 cdl_option CYGNUM_HAL_RTC_PERIOD {
3199 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3200 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3202 # Current_value: 36864
3206 # UART1 available as diagnostic/debug channel
3207 # The chip has multiple serial channels which may be
3208 # used for different things on different platforms. This
3209 # interface allows a platform to indicate that the specified
3210 # serial port can be used as a diagnostic and/or debug channel.
3212 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3213 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3214 # This value cannot be modified here.
3218 # The following properties are affected by this value
3221 # UART2 available as diagnostic/debug channel
3222 # The chip has multiple serial channels which may be
3223 # used for different things on different platforms. This
3224 # interface allows a platform to indicate that the specified
3225 # serial port can be used as a diagnostic and/or debug channel.
3227 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3228 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3229 # This value cannot be modified here.
3233 # The following properties are affected by this value
3236 # UART3 available as diagnostic/debug channel
3237 # The chip has multiple serial channels which may be
3238 # used for different things on different platforms. This
3239 # interface allows a platform to indicate that the specified
3240 # serial port can be used as a diagnostic and/or debug channel.
3242 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3243 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3244 # This value cannot be modified here.
3248 # The following properties are affected by this value
3251 # UART4 available as diagnostic/debug channel
3252 # The chip has multiple serial channels which may be
3253 # used for different things on different platforms. This
3254 # interface allows a platform to indicate that the specified
3255 # serial port can be used as a diagnostic and/or debug channel.
3257 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3258 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3259 # This value cannot be modified here.
3263 # The following properties are affected by this value
3266 # UART5 available as diagnostic/debug channel
3267 # The chip has multiple serial channels which may be
3268 # used for different things on different platforms. This
3269 # interface allows a platform to indicate that the specified
3270 # serial port can be used as a diagnostic and/or debug channel.
3272 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3273 # No options implement this inferface
3274 # This value cannot be modified here.
3280 # This HAL platform package provides generic
3281 # support for the Ka-Ro electronics TX51 module.
3283 cdl_package CYGPKG_HAL_ARM_TX51KARO {
3284 # Packages cannot be added or removed, nor can their version be changed,
3285 # simply by editing their value. Instead the appropriate configuration
3286 # should be used to perform these actions.
3288 # This value cannot be modified here.
3290 # Current value: 1 current
3291 # Requires: CYGINT_ISO_CTYPE
3292 # CYGINT_ISO_CTYPE == 1
3294 # Requires: CYGBLD_BUILD_REDBOOT == 1
3295 # CYGBLD_BUILD_REDBOOT == 1
3301 # The only startup type allowed is ROMRAM, since this will allow
3302 # the program to exist in ROM, but be copied to RAM during startup
3303 # which is required to boot from NAND flash.
3305 cdl_component CYG_HAL_STARTUP {
3307 # No user value, uncomment the following line to provide one.
3309 # value_source default
3310 # Default value: ROMRAM
3311 # Legal values: "ROMRAM"
3313 # The following properties are affected by this value
3314 # option CYGSEM_HAL_ROM_MONITOR
3315 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3316 # option CYGSEM_HAL_ROM_MONITOR
3317 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3318 # option CYGSEM_HAL_USE_ROM_MONITOR
3319 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3320 # option CYGSEM_HAL_USE_ROM_MONITOR
3321 # Requires: CYG_HAL_STARTUP == "RAM"
3322 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3323 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3324 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3325 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3326 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3327 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3328 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3329 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3330 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3331 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3332 # option CYGPRI_REDBOOT_ROM_MONITOR
3333 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3334 # option CYGPRI_REDBOOT_ROM_MONITOR
3335 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3338 # Diagnostic serial port baud rate
3339 # This option selects the baud rate used for the console port.
3340 # Note: this should match the value chosen for the GDB port if the
3341 # console and GDB port are the same.
3343 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3345 # No user value, uncomment the following line to provide one.
3347 # value_source default
3348 # Default value: 115200
3349 # Legal values: 9600 19200 38400 57600 115200
3352 # GDB serial port baud rate
3353 # This option selects the baud rate used for the GDB port.
3354 # Note: this should match the value chosen for the console port if the
3355 # console and GDB port are the same.
3357 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3359 # No user value, uncomment the following line to provide one.
3361 # value_source default
3362 # Default value: 115200
3363 # Legal values: 9600 19200 38400 57600 115200
3366 # Number of communication channels on the TX51
3368 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3369 # Calculated value: 3
3373 # The following properties are affected by this value
3374 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3375 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3377 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3378 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3379 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3383 # The TX51 provides access to three serial ports. This option
3384 # chooses which port will be used to connect to a host
3387 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3388 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3389 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3393 # No user value, uncomment the following line to provide one.
3395 # value_source default
3397 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3398 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3401 # Default console channel.
3403 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3404 # Calculated value: 0
3407 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3408 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3410 # The following properties are affected by this value
3411 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3412 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3415 # Console serial port
3416 # The TX51 provides access to three serial ports. This option
3417 # chooses which port will be used for console output.
3419 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3420 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3421 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3425 # No user value, uncomment the following line to provide one.
3427 # value_source default
3428 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3429 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3431 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3432 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3435 # Ka-Ro electronics TX51 module build options
3436 # Package specific build options including control over
3437 # compiler flags used only in building this package,
3438 # and details of which tests are built.
3440 cdl_component CYGPKG_HAL_ARM_TX51_OPTIONS {
3441 # There is no associated value.
3442 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3443 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3449 # This option specifies the SDRAM size of the TX51 module.
3451 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_SIZE {
3453 user_value 0x10000000
3455 # Default value: 0x08000000
3456 # Legal values: 0x10000000 0x08000000 0x04000000
3460 # This option specifies the SDRAM clock in MHz of the TX51 module.
3462 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_CLK {
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3467 # Default value: 166
3468 # Legal values: 166 200
3472 # This option specifies the CPU clock in MHz of the TX51 module.
3474 cdl_option CYGNUM_HAL_ARM_TX51_CPU_CLK {
3478 # Default value: 800
3479 # Legal values: 600 800
3482 # Enable low level debugging with LED
3483 # This option enables low level debugging by blink codes
3484 # of the LED on STK5.
3486 cdl_option CYGOPT_HAL_ARM_TX51_DEBUG {
3488 # No user value, uncomment the following line to provide one.
3490 # value_source default
3491 # Default value: false
3492 # false (unknown) == 0
3496 # Additional compiler flags
3497 # This option modifies the set of compiler flags for
3498 # building the TX51 HAL. These flags are used in addition
3499 # to the set of global flags.
3501 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_ADD {
3503 # No user value, uncomment the following line to provide one.
3505 # value_source default
3509 # Suppressed compiler flags
3510 # This option modifies the set of compiler flags for
3511 # building the TX51 HAL. These flags are removed from
3512 # the set of global flags if present.
3514 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_REMOVE {
3516 # No user value, uncomment the following line to provide one.
3518 # value_source default
3522 # Show a splash screen from the FIS partition: 'logo'
3523 # When this option is enabled, RedBoot will look for a flash partition
3524 # named 'logo' and display the contents of this partition as initial
3527 cdl_option CYGHWR_MX51_LCD_LOGO {
3528 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3529 # CYGPKG_DEVS_IMX_IPU == current
3533 # No user value, uncomment the following line to provide one.
3535 # value_source default
3542 cdl_component CYGHWR_MEMORY_LAYOUT {
3543 # Calculated value: "arm_tx51_romram"
3545 # Current_value: arm_tx51_romram
3549 # Memory layout linker script fragment
3551 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3552 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.ldi>"
3554 # Current_value: <pkgconf/mlt_arm_tx51_romram.ldi>
3557 # Memory layout header file
3559 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3560 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.h>"
3562 # Current_value: <pkgconf/mlt_arm_tx51_romram.h>
3571 # Common types and useful macros.
3572 # Tracing and assertion facilities.
3573 # Package startup options.
3575 cdl_package CYGPKG_INFRA {
3576 # Packages cannot be added or removed, nor can their version be changed,
3577 # simply by editing their value. Instead the appropriate configuration
3578 # should be used to perform these actions.
3580 # This value cannot be modified here.
3582 # Current value: 1 current
3584 # The following properties are affected by this value
3585 # package CYGPKG_HAL
3586 # Requires: CYGPKG_INFRA
3587 # component CYGBLD_BUILD_REDBOOT
3588 # Requires: CYGPKG_INFRA
3593 # The eCos source code contains a significant amount of
3594 # internal debugging support, in the form of assertions and
3596 # Assertions check at runtime that various conditions are as
3597 # expected; if not, execution is halted.
3598 # Tracing takes the form of text messages that are output
3599 # whenever certain events occur, or whenever functions are
3601 # The most important property of these checks and messages is
3602 # that they are not required for the program to run.
3603 # It is prudent to develop software with assertions enabled,
3604 # but disable them when making a product release, thus
3605 # removing the overhead of that checking.
3606 # It is possible to enable assertions and tracing
3608 # There are also options controlling the exact behaviour of
3609 # the assertion and tracing facilities, thus giving users
3610 # finer control over the code and data size requirements.
3612 cdl_component CYGPKG_INFRA_DEBUG {
3614 # No user value, uncomment the following line to provide one.
3616 # value_source default
3619 # The following properties are affected by this value
3620 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3621 # ActiveIf: CYGPKG_INFRA_DEBUG
3626 # If this option is defined, asserts in the code are tested.
3627 # Assert functions (CYG_ASSERT()) are defined in
3628 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3629 # If it is not defined, these result in no additional
3630 # object code and no checking of the asserted conditions.
3632 cdl_component CYGDBG_USE_ASSERTS {
3633 # This option is not active
3634 # The parent CYGPKG_INFRA_DEBUG is disabled
3637 # No user value, uncomment the following line to provide one.
3639 # value_source default
3641 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3642 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3645 # The following properties are affected by this value
3646 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3647 # Requires: CYGDBG_USE_ASSERTS
3648 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3649 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3654 # This option allows individual control of preconditions.
3655 # A precondition is one type of assert, which it is
3656 # useful to control separately from more general asserts.
3657 # The function is CYG_PRECONDITION(condition,msg).
3659 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3660 # This option is not active
3661 # The parent CYGDBG_USE_ASSERTS is not active
3664 # No user value, uncomment the following line to provide one.
3666 # value_source default
3671 # This option allows individual control of postconditions.
3672 # A postcondition is one type of assert, which it is
3673 # useful to control separately from more general asserts.
3674 # The function is CYG_POSTCONDITION(condition,msg).
3676 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3677 # This option is not active
3678 # The parent CYGDBG_USE_ASSERTS is not active
3681 # No user value, uncomment the following line to provide one.
3683 # value_source default
3688 # This option allows individual control of loop invariants.
3689 # A loop invariant is one type of assert, which it is
3690 # useful to control separately from more general asserts,
3691 # particularly since a loop invariant is typically evaluated
3692 # a great many times when used correctly.
3693 # The function is CYG_LOOP_INVARIANT(condition,msg).
3695 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3696 # This option is not active
3697 # The parent CYGDBG_USE_ASSERTS is not active
3700 # No user value, uncomment the following line to provide one.
3702 # value_source default
3707 # All assertions within eCos contain a text message
3708 # which should give some information about the condition
3710 # These text messages will end up being embedded in the
3711 # application image and hence there is a significant penalty
3712 # in terms of image size.
3713 # It is possible to suppress the use of these messages by
3714 # disabling this option.
3715 # This results in smaller code size, but there is less
3716 # human-readable information if an assertion actually gets
3719 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3720 # This option is not active
3721 # The parent CYGDBG_USE_ASSERTS is not active
3724 # No user value, uncomment the following line to provide one.
3726 # value_source default
3732 # If this option is defined, tracing operations
3733 # result in output or logging, depending on other options.
3734 # This may have adverse effects on performance, if the time
3735 # taken to output message overwhelms the available CPU
3736 # power or output bandwidth.
3737 # Trace functions (CYG_TRACE()) are defined in
3738 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3739 # If it is not defined, these result in no additional
3740 # object code and no trace information.
3742 cdl_component CYGDBG_USE_TRACING {
3743 # This option is not active
3744 # The parent CYGPKG_INFRA_DEBUG is disabled
3747 # No user value, uncomment the following line to provide one.
3749 # value_source default
3751 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3752 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3755 # The following properties are affected by this value
3756 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3757 # ActiveIf: CYGDBG_USE_TRACING
3758 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3759 # ActiveIf: CYGDBG_USE_TRACING
3760 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3761 # ActiveIf: CYGDBG_USE_TRACING
3762 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3763 # ActiveIf: CYGDBG_USE_TRACING
3764 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3765 # ActiveIf: CYGDBG_USE_TRACING
3769 # Trace function reports
3770 # This option allows individual control of
3771 # function entry/exit tracing, independent of
3772 # more general tracing output.
3773 # This may be useful to remove clutter from a
3776 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3777 # This option is not active
3778 # The parent CYGDBG_USE_TRACING is not active
3779 # The parent CYGDBG_USE_TRACING is disabled
3782 # No user value, uncomment the following line to provide one.
3784 # value_source default
3789 # All trace calls within eCos contain a text message
3790 # which should give some information about the circumstances.
3791 # These text messages will end up being embedded in the
3792 # application image and hence there is a significant penalty
3793 # in terms of image size.
3794 # It is possible to suppress the use of these messages by
3795 # disabling this option.
3796 # This results in smaller code size, but there is less
3797 # human-readable information available in the trace output,
3798 # possibly only filenames and line numbers.
3800 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3801 # This option is not active
3802 # The parent CYGDBG_USE_TRACING is not active
3803 # The parent CYGDBG_USE_TRACING is disabled
3806 # No user value, uncomment the following line to provide one.
3808 # value_source default
3813 # Trace output implementations
3815 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3816 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3817 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3818 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3819 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3820 # This option is not active
3821 # The parent CYGPKG_INFRA_DEBUG is disabled
3823 # This value cannot be modified here.
3827 # The following properties are affected by this value
3828 # component CYGDBG_USE_ASSERTS
3829 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3830 # component CYGDBG_USE_TRACING
3831 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3835 # A null output module which is useful when
3836 # debugging interactively; the output routines
3837 # can be breakpointed rather than have them actually
3838 # 'print' something.
3840 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3841 # This option is not active
3842 # The parent CYGPKG_INFRA_DEBUG is disabled
3845 # No user value, uncomment the following line to provide one.
3847 # value_source default
3852 # An output module which produces simple output
3853 # from tracing and assertion events.
3855 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3856 # This option is not active
3857 # The parent CYGPKG_INFRA_DEBUG is disabled
3860 # No user value, uncomment the following line to provide one.
3862 # value_source default
3867 # An output module which produces fancy output
3868 # from tracing and assertion events.
3870 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3871 # This option is not active
3872 # The parent CYGPKG_INFRA_DEBUG is disabled
3875 # No user value, uncomment the following line to provide one.
3877 # value_source default
3882 # An output module which buffers output
3883 # from tracing and assertion events. The stored
3884 # messages are output when an assert fires, or
3885 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3887 # Of course, there will only be stored messages
3888 # if tracing per se (CYGDBG_USE_TRACING)
3891 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3892 # This option is not active
3893 # The parent CYGPKG_INFRA_DEBUG is disabled
3896 # No user value, uncomment the following line to provide one.
3898 # value_source default
3904 # The size of the trace buffer. This counts the number
3905 # of trace records stored. When the buffer fills it
3906 # either wraps, stops recording, or generates output.
3908 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3909 # This option is not active
3910 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3911 # ActiveIf constraint: CYGDBG_USE_TRACING
3912 # CYGDBG_USE_TRACING == 0
3916 # No user value, uncomment the following line to provide one.
3918 # value_source default
3920 # Legal values: 5 to 65535
3923 # Wrap trace buffer when full
3924 # When the trace buffer has filled with records it
3925 # starts again at the beginning. Hence only the last
3926 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3929 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3930 # This option is not active
3931 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3932 # ActiveIf constraint: CYGDBG_USE_TRACING
3933 # CYGDBG_USE_TRACING == 0
3937 # No user value, uncomment the following line to provide one.
3939 # value_source default
3943 # Halt trace buffer when full
3944 # When the trace buffer has filled with records it
3945 # stops recording. Hence only the first
3946 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3949 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3950 # This option is not active
3951 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3952 # ActiveIf constraint: CYGDBG_USE_TRACING
3953 # CYGDBG_USE_TRACING == 0
3957 # No user value, uncomment the following line to provide one.
3959 # value_source default
3963 # Print trace buffer when full
3964 # When the trace buffer has filled with records it
3965 # prints the contents of the buffer. The buffer is then
3966 # emptied and the system continues.
3968 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3969 # This option is not active
3970 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3971 # ActiveIf constraint: CYGDBG_USE_TRACING
3972 # CYGDBG_USE_TRACING == 0
3976 # No user value, uncomment the following line to provide one.
3978 # value_source default
3982 # Print trace buffer on assert fail
3983 # When an assertion fails the trace buffer will be
3984 # printed to the default diagnostic device.
3986 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3987 # This option is not active
3988 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3989 # ActiveIf constraint: CYGDBG_USE_TRACING
3990 # CYGDBG_USE_TRACING == 0
3994 # No user value, uncomment the following line to provide one.
3996 # value_source default
4001 # Use function names
4002 # All trace and assert calls within eCos contain a
4003 # reference to the builtin macro '__PRETTY_FUNCTION__',
4004 # which evaluates to a string containing
4005 # the name of the current function.
4006 # This is useful when reading a trace log.
4007 # It is possible to suppress the use of the function name
4008 # by disabling this option.
4009 # This results in smaller code size, but there is less
4010 # human-readable information available in the trace output,
4011 # possibly only filenames and line numbers.
4013 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4014 # This option is not active
4015 # The parent CYGPKG_INFRA_DEBUG is disabled
4018 # No user value, uncomment the following line to provide one.
4020 # value_source default
4026 # Some packages require a startup routine to be called.
4027 # This can be carried out by application code, by supplying
4028 # a routine called cyg_package_start() which calls the
4029 # appropriate package startup routine(s).
4030 # Alternatively, this routine can be constructed automatically
4031 # and configured to call the startup routines of your choice.
4033 cdl_component CYGPKG_INFRA_STARTUP {
4034 # There is no associated value.
4038 # Start uITRON subsystem
4039 # Generate a call to initialize the
4040 # uITRON compatibility subsystem
4041 # within the system version of cyg_package_start().
4042 # This enables compatibility with uITRON.
4043 # You must configure uITRON with the correct tasks before
4044 # starting the uItron subsystem.
4045 # If this is disabled, and you want to use uITRON,
4046 # you must call cyg_uitron_start() from your own
4047 # cyg_package_start() or cyg_userstart().
4049 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4050 # This option is not active
4051 # ActiveIf constraint: CYGPKG_UITRON
4052 # CYGPKG_UITRON (unknown) == 0
4056 # No user value, uncomment the following line to provide one.
4058 # value_source default
4060 # Requires: CYGPKG_UITRON
4061 # CYGPKG_UITRON (unknown) == 0
4066 # Smaller slower memcpy()
4067 # Enabling this option causes the implementation of
4068 # the standard memcpy() routine to reduce code
4069 # size at the expense of execution speed. This
4070 # option is automatically enabled with the use of
4071 # the -Os option to the compiler. Also note that
4072 # the compiler will try to use its own builtin
4073 # version of memcpy() if possible, ignoring the
4074 # implementation in this package, unless given
4075 # the -fno-builtin compiler option.
4077 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4079 # No user value, uncomment the following line to provide one.
4081 # value_source default
4085 # Smaller slower memset()
4086 # Enabling this option causes the implementation of
4087 # the standard memset() routine to reduce code
4088 # size at the expense of execution speed. This
4089 # option is automatically enabled with the use of
4090 # the -Os option to the compiler. Also note that
4091 # the compiler will try to use its own builtin
4092 # version of memset() if possible, ignoring the
4093 # implementation in this package, unless given
4094 # the -fno-builtin compiler option.
4096 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4098 # No user value, uncomment the following line to provide one.
4100 # value_source default
4104 # Provide empty C++ delete functions
4105 # To deal with virtual destructors, where the correct delete()
4106 # function must be called for the derived class in question, the
4107 # underlying delete is called when needed, from destructors. This
4108 # is regardless of whether the destructor is called by delete itself.
4109 # So there is a reference to delete() from all destructors. The
4110 # default builtin delete() attempts to call free() if there is
4111 # one defined. So, if you have destructors, and you have free(),
4112 # as in malloc() and free(), any destructor counts as a reference
4113 # to free(). So the dynamic memory allocation code is linked
4114 # in regardless of whether it gets explicitly called. This
4115 # increases code and data size needlessly.
4116 # To defeat this undesirable behaviour, we define empty versions
4117 # of delete and delete. But doing this prevents proper use
4118 # of dynamic memory in C++ programs via C++'s new and delete
4120 # Therefore, this option is provided
4121 # for explicitly disabling the provision of these empty functions,
4122 # so that new and delete can be used, if that is what is required.
4124 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4126 # No user value, uncomment the following line to provide one.
4128 # value_source default
4132 # Threshold for valid number of delete calls
4133 # Some users don't know about the empty delete function and then
4134 # wonder why their C++ classes are leaking memory. If
4135 # INFRA_DEBUG is enabled we keep a counter for the number of
4136 # times delete is called. If it goes above this threshold we throw
4137 # an assertion failure. This should point heavy users of
4138 # delete in the right direction without upsetting those who want
4139 # an empty delete function.
4141 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4142 # This option is not active
4143 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4144 # CYGPKG_INFRA_DEBUG == 0
4148 # No user value, uncomment the following line to provide one.
4150 # value_source default
4151 # Default value: 100
4154 # Provide dummy abort() function
4155 # This option controls the inclusion of a dummy abort() function.
4156 # Parts of the C and C++ compiler runtime systems contain references
4157 # to abort(), particulary in the C++ exception handling code. It is
4158 # not possible to eliminate these references, so this dummy function
4159 # in included to satisfy them. It is not expected that this function
4160 # will ever be called, so its current behaviour is to simply loop.
4162 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4164 # No user value, uncomment the following line to provide one.
4166 # value_source default
4167 # Default value: CYGINT_ISO_EXIT == 0
4168 # CYGINT_ISO_EXIT == 0
4170 # Requires: !CYGINT_ISO_EXIT
4171 # CYGINT_ISO_EXIT == 0
4175 # Reset platform at end of test case execution
4176 # If this option is set then test case programs will reset the platform
4177 # when they terminate, as opposed to the default which is to just hang
4180 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4182 # No user value, uncomment the following line to provide one.
4184 # value_source default
4188 # Provide dummy strlen() function
4189 # This option controls the inclusion of a dummy strlen() function.
4190 # Parts of the C and C++ compiler runtime systems contain references
4191 # to strlen(), particulary in the C++ exception handling code. It is
4192 # not possible to eliminate these references, so this dummy function
4193 # in included to satisfy them. While it is not expected that this function
4194 # will ever be called, it is functional but uses the simplest, smallest
4195 # algorithm. There is a faster version of strlen() in the C library.
4197 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4199 # No user value, uncomment the following line to provide one.
4201 # value_source default
4202 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4203 # CYGINT_ISO_STRING_STRFUNCS == 1
4205 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4206 # CYGINT_ISO_STRING_STRFUNCS == 1
4210 # Make all compiler warnings show as errors
4211 # Enabling this option will cause all compiler warnings to show
4212 # as errors and bring the library build to a halt. This is used
4213 # to ensure that the code base is warning free, and thus ensure
4214 # that newly introduced warnings stand out and get fixed before
4215 # they show up as weird run-time behavior.
4217 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4222 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4223 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4226 # The following properties are affected by this value
4227 # option CYGBLD_GLOBAL_CFLAGS
4228 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4231 # Make compiler and assembler communicate by pipe
4232 # Enabling this option will cause the compiler to feed the
4233 # assembly output the the assembler via a pipe instead of
4234 # via a temporary file. This normally reduces the build
4237 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4242 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4243 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4247 # Infra build options
4248 # Package specific build options including control over
4249 # compiler flags used only in building this package.
4251 cdl_component CYGPKG_INFRA_OPTIONS {
4252 # There is no associated value.
4256 # Additional compiler flags
4257 # This option modifies the set of compiler flags for
4258 # building the eCos infra package. These flags are used
4259 # in addition to the set of global flags.
4261 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4263 # No user value, uncomment the following line to provide one.
4264 # user_value "-fno-rtti -Woverloaded-virtual"
4265 # value_source default
4266 # Default value: "-fno-rtti -Woverloaded-virtual"
4269 # Suppressed compiler flags
4270 # This option modifies the set of compiler flags for
4271 # building the eCos infra package. These flags are removed from
4272 # the set of global flags if present.
4274 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4276 # No user value, uncomment the following line to provide one.
4277 # user_value -Wno-pointer-sign
4278 # value_source default
4279 # Default value: -Wno-pointer-sign
4282 # Suppressed linker flags
4283 # This option modifies the set of linker flags for
4284 # building the eCos infra package tests. These flags are removed from
4285 # the set of global flags if present.
4287 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4289 # No user value, uncomment the following line to provide one.
4290 # user_value -Wl,--gc-sections
4291 # value_source default
4292 # Default value: -Wl,--gc-sections
4295 # Additional linker flags
4296 # This option modifies the set of linker flags for
4297 # building the eCos infra package tests. These flags are added to
4298 # the set of global flags if present.
4300 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4302 # No user value, uncomment the following line to provide one.
4303 # user_value -Wl,--fatal-warnings
4304 # value_source default
4305 # Default value: -Wl,--fatal-warnings
4308 # Infra package tests
4310 cdl_component CYGPKG_INFRA_TESTS {
4311 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4313 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4317 # Number of times a test runs
4318 # This option controls the number of times tests will execute their
4319 # basic function. Not all tests will honor this setting, but those
4320 # that do will execute the test N times before terminating. A value
4321 # less than 0 indicates to run forever.
4323 cdl_option CYGNUM_TESTS_RUN_COUNT {
4325 # No user value, uncomment the following line to provide one.
4327 # value_source default
4334 # Redboot ROM monitor
4335 # doc: ref/redboot.html
4336 # This package supports the Redboot [stand-alone debug monitor]
4337 # using eCos as the underlying board support mechanism.
4339 cdl_package CYGPKG_REDBOOT {
4340 # Packages cannot be added or removed, nor can their version be changed,
4341 # simply by editing their value. Instead the appropriate configuration
4342 # should be used to perform these actions.
4344 # This value cannot be modified here.
4346 # Current value: 1 current
4347 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4348 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4351 # The following properties are affected by this value
4352 # component CYGPKG_REDBOOT_ARM_OPTIONS
4353 # ActiveIf: CYGPKG_REDBOOT
4354 # component CYGPKG_REDBOOT_HAL_OPTIONS
4355 # ActiveIf: CYGPKG_REDBOOT
4356 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
4357 # ActiveIf: CYGPKG_REDBOOT
4358 # option CYGSEM_IO_ETH_DRIVERS_WARN
4359 # ActiveIf: CYGPKG_REDBOOT
4363 # Include support for ELF file format
4365 cdl_component CYGSEM_REDBOOT_ELF {
4367 # No user value, uncomment the following line to provide one.
4369 # value_source default
4374 # Use the virtual address in the ELF headers
4375 # The ELF headers contain both a virtual and a physical address
4376 # for where code/data should be loaded. By default the physical
4377 # address is used but sometimes it is necassary to use the
4378 # virtual address because of bugy toolchains
4380 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4382 # No user value, uncomment the following line to provide one.
4384 # value_source default
4389 # Methods of loading images using redboot
4391 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4392 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4393 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4394 # This value cannot be modified here.
4398 # The following properties are affected by this value
4399 # component CYGBLD_BUILD_REDBOOT
4400 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4403 # Build Redboot ROM ELF image
4404 # This option enables the building of the Redboot ELF image.
4405 # The image may require further relocation or symbol
4406 # stripping before being converted to a binary image.
4407 # This is handled by a rule in the target CDL.
4409 cdl_component CYGBLD_BUILD_REDBOOT {
4411 # No user value, uncomment the following line to provide one.
4413 # The inferred value should not be edited directly.
4415 # value_source inferred
4417 # Requires: CYGPKG_INFRA
4418 # CYGPKG_INFRA == current
4420 # Requires: CYGPKG_ISOINFRA
4421 # CYGPKG_ISOINFRA == current
4423 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4424 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4426 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4427 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4429 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4430 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4432 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4433 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4435 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4436 # CYGINT_ISO_STRING_MEMFUNCS == 1
4438 # Requires: CYGINT_ISO_STRING_STRFUNCS
4439 # CYGINT_ISO_STRING_STRFUNCS == 1
4441 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4442 # CYGINT_REDBOOT_LOAD_METHOD == 2
4445 # The following properties are affected by this value
4446 # package CYGPKG_HAL_ARM_TX51KARO
4447 # Requires: CYGBLD_BUILD_REDBOOT == 1
4448 # option CYGBLD_BUILD_REDBOOT_BIN
4449 # ActiveIf: CYGBLD_BUILD_REDBOOT
4453 # Include GDB support in RedBoot
4454 # RedBoot normally includes support for the GDB debugging
4455 # protocols. This option allows this to be disabled which
4456 # may yield a substantial savings in terms of code and memory
4459 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4460 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4461 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4466 # The inferred value should not be edited directly.
4470 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4471 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4473 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4474 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4478 # Threads debugging support
4479 # Enabling this option will include special code in the
4480 # GDB stubs to support debugging of threaded programs. In
4481 # the case of eCos programs, this support allows GDB to
4482 # have complete access to the eCos threads in the
4485 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4486 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4487 # CYG_HAL_STARTUP == ROMRAM
4491 # No user value, uncomment the following line to provide one.
4493 # value_source default
4495 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4496 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4500 # Customized version string
4501 # Use this option to define a customized version "string" for
4502 # RedBoot. Note: this value is only cosmetic, displayed by the
4503 # "version" command, but is useful for providing site specific
4504 # information about the RedBoot configuration.
4506 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4508 # No user value, uncomment the following line to provide one.
4510 # The inferred value should not be edited directly.
4511 inferred_value 1 "Ka-Ro 2010-01-06"
4512 # value_source inferred
4513 # Default value: 0 0
4516 # Enable command line editing
4517 # If this option is non-zero, RedBoot will remember the
4518 # last N command lines. These lines may be reused.
4519 # Enabling this history will also enable rudimentary
4520 # editting of the lines themselves.
4522 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4524 # No user value, uncomment the following line to provide one.
4526 # value_source default
4529 # The following properties are affected by this value
4530 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4531 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4532 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4533 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4536 # Enable command line editing using ANSI arrows, etc
4537 # If this option is enabled, RedBoot will accept standard ANSI key
4538 # sequences for cursor movement (along with the emacs style keys).
4540 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4541 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4542 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4546 # No user value, uncomment the following line to provide one.
4548 # value_source default
4552 # Enable history command and expansion
4553 # Enabling this option will allow RedBoot to provide a
4554 # history command to list previous commands. Also enables
4555 # history expansion via '!' character similar to bash
4558 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4560 # No user value, uncomment the following line to provide one.
4562 # value_source default
4564 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4565 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4569 # Number of unique RAM segments on platform
4570 # Change this option to be the number of memory segments which are
4571 # supported by the platform. If the value is greater than 1, then
4572 # a platform specific function must provide information about the
4573 # additional segments.
4575 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4577 # No user value, uncomment the following line to provide one.
4579 # value_source default
4583 # Include support gzip/zlib decompression
4585 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4586 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4587 # CYGPKG_COMPRESS_ZLIB == current
4591 # No user value, uncomment the following line to provide one.
4593 # value_source default
4596 # The following properties are affected by this value
4597 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4598 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4602 # Size of zlib decompression buffer
4603 # This is the size of the buffer filled with incoming data
4604 # during load before calls are made to the decompressor
4605 # function. For ethernet downloads this can be made bigger
4606 # (at the cost of memory), but for serial downloads on slow
4607 # processors it may be necessary to reduce the size to
4608 # avoid serial overruns. zlib appears to bail out if less
4609 # than five bytes are available initially so this is the
4612 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4614 # No user value, uncomment the following line to provide one.
4616 # value_source default
4618 # Legal values: 5 to 256
4621 # Support compression of Flash images
4622 # This CDL indicates whether flash images can
4623 # be decompressed from gzip/zlib format into RAM.
4625 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4626 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4627 # CYGPKG_REDBOOT_FLASH == 1
4629 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4630 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4631 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4634 # Calculated value: 1
4639 # Include GZIP uncompress command
4640 # Enable this option to include a 'gunzip' command
4641 # to uncompress GZIP compressed data.
4643 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4645 # No user value, uncomment the following line to provide one.
4647 # value_source default
4651 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4652 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4654 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4656 # No user value, uncomment the following line to provide one.
4658 # The inferred value should not be edited directly.
4660 # value_source inferred
4663 # The following properties are affected by this value
4664 # option CYGPRI_REDBOOT_ZLIB_FLASH
4665 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4669 # Include support for xyzModem downloads
4670 # doc: ref/download-command.html
4672 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4674 # No user value, uncomment the following line to provide one.
4676 # value_source default
4679 # The following properties are affected by this value
4680 # option CYGPKG_REDBOOT_CFLAGS_ADD
4681 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4684 # Additional compiler flags
4685 # This option modifies the set of compiler flags for
4686 # building the eCos infra package. These flags are used
4687 # in addition to the set of global flags.
4689 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4690 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4691 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4695 # No user value, uncomment the following line to provide one.
4696 # user_value -Wno-inline
4697 # value_source default
4698 # Default value: -Wno-inline
4701 # Allow the load-command write into Flash.
4702 # Write images direct to Flash via the load command.
4703 # We assume anything which is invalid RAM is flash, hence
4704 # the requires statement
4706 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4707 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4708 # CYGPKG_REDBOOT_FLASH == 1
4712 # No user value, uncomment the following line to provide one.
4714 # value_source default
4716 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4717 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4721 # Include MS Windows CE support
4722 # doc: ref/wince.html
4723 # This option enables MS Windows CE EShell support
4724 # and Windows CE .BIN images support
4726 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4733 # Include support for MXC USB downloads
4735 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4737 # No user value, uncomment the following line to provide one.
4739 # value_source default
4743 # Include support for i.MX USB OTG downloads
4745 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4747 # No user value, uncomment the following line to provide one.
4749 # value_source default
4753 # Include POSIX checksum command
4754 # doc: ref/cksum-command.html
4756 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4758 # No user value, uncomment the following line to provide one.
4760 # value_source default
4764 # Include memory fill command
4765 # doc: ref/mfill-command.html
4767 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4769 # No user value, uncomment the following line to provide one.
4771 # value_source default
4775 # Include memory compare command
4776 # doc: ref/mcmp-command.html
4778 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4780 # No user value, uncomment the following line to provide one.
4782 # value_source default
4786 # Include memory copy command
4787 # doc: ref/mcopy-command.html
4789 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4791 # No user value, uncomment the following line to provide one.
4793 # value_source default
4797 # Include memory dump command
4798 # doc: ref/dump-command.html
4800 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4802 # No user value, uncomment the following line to provide one.
4804 # value_source default
4808 # Include cache command
4809 # doc: ref/cache-command.html
4811 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4813 # No user value, uncomment the following line to provide one.
4815 # value_source default
4819 # Include exec command
4820 # doc: ref/exec-command.html
4822 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4824 # No user value, uncomment the following line to provide one.
4826 # value_source default
4829 # The following properties are affected by this value
4830 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4831 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4834 # Include I/O Memory commands 'iopeek' and 'iopoke'
4836 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4838 # No user value, uncomment the following line to provide one.
4840 # value_source default
4844 # Granularity of timer/ticks
4845 # This option controls the granularity of the timers.
4846 # Faster CPUs can afford higher granularity (lower values)
4847 # which should give higher network performance since the stack
4850 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4852 # No user value, uncomment the following line to provide one.
4854 # value_source default
4855 # Default value: 250
4856 # Legal values: 10 25 50 100 250 500 1000
4859 # Redboot Networking
4860 # This option includes networking support in RedBoot.
4862 cdl_component CYGPKG_REDBOOT_NETWORKING {
4863 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4864 # CYGPKG_IO_ETH_DRIVERS == current
4868 # No user value, uncomment the following line to provide one.
4870 # value_source default
4873 # The following properties are affected by this value
4874 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4875 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4879 # Print net debug information
4880 # This option is overriden by the configuration stored
4883 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4885 # No user value, uncomment the following line to provide one.
4887 # value_source default
4891 # Support TFTP for download
4892 # This option enables the use of the TFTP protocol for
4895 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4897 # No user value, uncomment the following line to provide one.
4899 # value_source default
4903 # Support HTTP for download
4904 # This option enables the use of the HTTP protocol for
4907 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4914 # Default IP address
4915 # This IP address is the default used by RedBoot if
4916 # a BOOTP/DHCP server does not respond. The numbers
4917 # should be separated by *commas*, and not dots. If
4918 # an IP address is configured into the Flash
4919 # configuration, that will be used in preference.
4921 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4923 # No user value, uncomment the following line to provide one.
4925 # value_source default
4926 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4927 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4932 # Do not try to use BOOTP
4933 # By default Redboot tries to use BOOTP to get an IP
4934 # address. If there's no BOOTP server on your network
4935 # use this option to avoid to wait until the
4936 # timeout. This option is overriden by the
4937 # configuration stored in flash.
4939 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4940 # This option is not active
4941 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4944 # No user value, uncomment the following line to provide one.
4946 # value_source default
4950 # Default bootp server
4951 # This IP address is the default server
4952 # address used by RedBoot if a BOOTP/DHCP
4953 # server does not respond. The numbers should
4954 # be separated by *commas*, and not dots. If
4955 # an IP address is configured into the Flash
4956 # configuration, that will be used in
4959 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4960 # This option is not active
4961 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4964 # No user value, uncomment the following line to provide one.
4966 # value_source default
4967 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4968 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4973 # Use DHCP to get IP information
4974 # Use DHCP protocol to obtain pertinent IP addresses, such
4975 # as the client, server, gateway, etc.
4977 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4979 # No user value, uncomment the following line to provide one.
4981 # value_source default
4984 # The following properties are affected by this value
4985 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4986 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4989 # Use a gateway for non-local IP traffic
4990 # Enabling this option will allow the RedBoot networking
4991 # stack to use a [single] gateway to reach a non-local
4992 # IP address. If disabled, RedBoot will only be able to
4993 # reach nodes on the same subnet.
4995 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4997 # No user value, uncomment the following line to provide one.
4999 # value_source default
5001 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5002 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5007 # Default gateway IP address
5008 # This IP address is the default used by RedBoot
5009 # if a BOOTP/DHCP server does not respond. The
5010 # numbers should be separated by *commas*, and
5011 # not dots. If an IP address is configured into
5012 # the Flash configuration, that will be used in
5015 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5017 # No user value, uncomment the following line to provide one.
5019 # value_source default
5020 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5021 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5025 # Default IP address mask
5026 # This IP address mask is the default used by
5027 # RedBoot if a BOOTP/DHCP server does not
5028 # respond. The numbers should be separated by
5029 # *commas*, and not dots. If an IP address is
5030 # configured into the Flash configuration, that
5031 # will be used in preference.
5033 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5035 # No user value, uncomment the following line to provide one.
5037 # value_source default
5038 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5039 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5044 # TCP port to listen for incoming connections
5045 # RedBoot will 'listen' on this port for incoming TCP
5046 # connections. This allows outside connections to be made
5047 # to the platform, either for GDB or RedBoot commands.
5049 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5051 # No user value, uncomment the following line to provide one.
5053 # value_source default
5054 # Default value: 9000
5057 # Number of [network] packet buffers
5058 # RedBoot may need to buffer network data to support
5059 # various connections. This option allows control
5060 # over the number of such buffered packets, and in
5061 # turn, controls the amount of memory used by RedBoot
5062 # (which is not available to user applications).
5063 # Each packet buffer takes up about 1514 bytes.
5064 # Note: there is little need to make this larger than
5067 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5069 # No user value, uncomment the following line to provide one.
5071 # value_source default
5073 # Legal values: 3 to 8
5077 # When this option is enabled, RedBoot will be built with
5078 # support for DNS, allowing use of hostnames on the command
5081 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5082 # This option is not active
5083 # ActiveIf constraint: CYGPKG_NS_DNS
5084 # CYGPKG_NS_DNS (unknown) == 0
5088 # No user value, uncomment the following line to provide one.
5090 # value_source default
5092 # Requires: !CYGPKG_NS_DNS_BUILD
5093 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5099 # This option sets the IP of the default DNS. The IP can be
5100 # changed at runtime as well.
5102 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5103 # This option is not active
5104 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5105 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5106 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5110 # No user value, uncomment the following line to provide one.
5111 # user_value 0.0.0.0
5112 # value_source default
5113 # Default value: 0.0.0.0
5116 # Timeout in DNS lookup
5117 # This option sets the timeout used when looking up an
5118 # address via the DNS. Default is 10 seconds.
5120 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5121 # This option is not active
5122 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5125 # No user value, uncomment the following line to provide one.
5127 # value_source default
5131 # Support the use of a domain name
5132 # This option controls if Redboot supports domain
5133 # names when performing DNS lookups
5135 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5136 # This option is not active
5137 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5140 # No user value, uncomment the following line to provide one.
5142 # value_source default
5147 # Default DNS domain
5148 # This option sets the default DNS domain name.
5149 # This value will be overwritten by the value in
5150 # flash or a domain returned by DHCP
5152 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5153 # This option is not active
5154 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5155 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5158 # No user value, uncomment the following line to provide one.
5160 # value_source default
5161 # Default value: 0 0
5164 # Get DNS domain from Flash
5165 # This option enables getting the domain name
5166 # from the flash configuration. This can later be
5167 # overwritten by a value learnt from DHCP
5169 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5170 # This option is not active
5171 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5172 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5173 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5174 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5178 # No user value, uncomment the following line to provide one.
5180 # value_source default
5184 # Use DNS domain from DHCP
5185 # This option enables the use of the domain name
5188 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5189 # This option is not active
5190 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5191 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5194 # No user value, uncomment the following line to provide one.
5196 # value_source default
5200 # BOOTP/DHCP DNS domain buffer size
5201 # This options sets the size of the static
5202 # buffer used by BOOTP/DHCP to store the DNS
5203 # domain name. The domain name will not be
5204 # set if the buffer is too small to hold it.
5206 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5207 # This option is not active
5208 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5209 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5212 # No user value, uncomment the following line to provide one.
5214 # value_source default
5220 # Default network device driver
5221 # This is the name of the default network device to use.
5223 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5224 # This option is not active
5225 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5226 # CYGHWR_NET_DRIVERS == 1
5230 # No user value, uncomment the following line to provide one.
5232 # value_source default
5233 # Default value: "\"\""
5236 # Initialize only one net device
5237 # This option tells RedBoot to stop initializing network
5238 # devices when it finds the first device which is
5239 # successfully initialized. The default behavior causes
5240 # all network devices to be initialized.
5242 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5243 # This option is not active
5244 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5245 # CYGHWR_NET_DRIVERS == 1
5249 # No user value, uncomment the following line to provide one.
5251 # value_source default
5256 # Let RedBoot use any I/O channel for its console.
5257 # If this option is enabled then RedBoot will attempt to use all
5258 # defined serial I/O channels for its console device. Once input
5259 # arrives at one of these channels then the console will use only
5262 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5264 # No user value, uncomment the following line to provide one.
5266 # The inferred value should not be edited directly.
5268 # value_source inferred
5272 # Let RedBoot adjust the baud rate of the serial console.
5273 # If this option is enabled then RedBoot will support commands
5274 # to set and query the baud rate on the selected console.
5276 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5277 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5278 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5282 # No user value, uncomment the following line to provide one.
5284 # value_source default
5288 # Run a platform specific startup function.
5289 # If this option is enabled then RedBoot will execute a platform
5290 # specific startup function before entering into its command line
5291 # processing. This allows the platform to perform any special
5292 # setups before RedBoot actually starts running. Note: the entire
5293 # RedBoot environment will already be initialized at this point.
5295 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5297 # No user value, uncomment the following line to provide one.
5299 # value_source default
5303 # Run a platform specific ESA validation function.
5304 # If this option is enabled then RedBoot will execute a platform
5305 # specific function to validate an ethernet ESA. This would be
5306 # useful if the address must conform to standards set by the
5307 # hardware manufacturer, etc.
5309 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5311 # No user value, uncomment the following line to provide one.
5313 # The inferred value should not be edited directly.
5315 # value_source inferred
5318 # The following properties are affected by this value
5319 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5320 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5321 # option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI
5322 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5325 # Maximum command line length
5326 # This option allows control over how long the CLI command line
5327 # should be. This space will be allocated statically
5328 # rather than from RedBoot's stack.
5330 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5332 # No user value, uncomment the following line to provide one.
5334 # The inferred value should not be edited directly.
5336 # value_source inferred
5337 # Default value: 256
5340 # Command processing idle timeout (ms)
5341 # This option controls the timeout period before the
5342 # command processing is considered 'idle'. Making this
5343 # number smaller will cause idle processing to take place
5344 # more often, etc. The default value of 10ms is a reasonable
5345 # tradeoff between responsiveness and overhead.
5347 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5349 # No user value, uncomment the following line to provide one.
5351 # value_source default
5355 # Validate RAM addresses during load
5356 # This option controls whether or not RedBoot will make
5357 # sure that memory being used by the "load" command is
5358 # in fact in user RAM. Leaving the option enabled makes
5359 # for a safer environment, but this check may not be valid
5360 # on all platforms, thus the ability to disable it.
5361 # ** Disable this only with great care **
5363 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5365 # No user value, uncomment the following line to provide one.
5367 # value_source default
5370 # The following properties are affected by this value
5371 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5372 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5375 # Allow RedBoot to support FLASH programming
5376 # If this option is enabled then RedBoot will provide commands
5377 # to manage images in FLASH memory. These images can be loaded
5378 # into memory for execution or executed in place.
5380 cdl_component CYGPKG_REDBOOT_FLASH {
5381 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5382 # CYGHWR_IO_FLASH_DEVICE == 1
5386 # No user value, uncomment the following line to provide one.
5388 # value_source default
5391 # The following properties are affected by this value
5392 # option CYGPRI_REDBOOT_ZLIB_FLASH
5393 # ActiveIf: CYGPKG_REDBOOT_FLASH
5394 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5395 # ActiveIf: CYGPKG_REDBOOT_FLASH
5399 # Byte order used to store info in flash.
5400 # This option controls the byte ordering used to store
5401 # the FIS directory info and flash config info.
5403 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5405 # No user value, uncomment the following line to provide one.
5406 # user_value NATURAL
5407 # value_source default
5408 # Default value: NATURAL
5409 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5412 # RedBoot Flash Image System support
5413 # doc: ref/flash-image-system.html
5414 # This option enables the Flash Image System commands
5415 # and support within RedBoot. If disabled, simple Flash
5416 # access commands such as "fis write" will still exist.
5417 # This option would be disabled for targets that need simple
5418 # FLASH manipulation, but do not have the need or space for
5419 # complete image management.
5421 cdl_option CYGOPT_REDBOOT_FIS {
5423 # No user value, uncomment the following line to provide one.
5425 # value_source default
5428 # The following properties are affected by this value
5429 # component CYGPKG_REDBOOT_FIS_CONTENTS
5430 # ActiveIf: CYGOPT_REDBOOT_FIS
5431 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5432 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5433 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5434 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5437 # Max number of chunks of free space to manage
5438 # If this option is defined then "fis free" will
5439 # rely on the FIS directory to determine what space is
5440 # free within the FLASH. This option controls the
5441 # maximum number of free segment which can be handled
5442 # (typically this number is small). If this option is
5443 # not enabled, the the archaic behaviour of actually
5444 # scanning the FLASH for erased sectors (unreliable)
5445 # will be used to determine what's free and what's
5448 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5450 # No user value, uncomment the following line to provide one.
5452 # value_source default
5453 # Default value: 1 32
5456 # Flash Image System default directory contents
5458 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5459 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5460 # CYGOPT_REDBOOT_FIS == 1
5463 # Calculated value: 1
5469 # Flash block containing the Directory
5470 # Which block of flash should hold the directory
5471 # information. Positive numbers are absolute block
5472 # numbers. Negative block numbers count backwards
5473 # from the last block. eg 2 means block 2, -2
5474 # means the last but one block.
5476 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5478 # No user value, uncomment the following line to provide one.
5480 # value_source default
5483 # The following properties are affected by this value
5484 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5485 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5486 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5489 # Redundant Flash Image System Directory Support
5490 # This option enables the use of a redundant FIS
5491 # directory within RedBoot. If enabled a flash block
5492 # will be reserved for a second copy of the fis
5493 # directory. Doing this allow for power failure safe
5494 # updates of the directory by the application.
5496 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5498 # No user value, uncomment the following line to provide one.
5500 # value_source default
5502 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5503 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5508 # Flash block containing the backup Directory
5509 # Which block of flash should hold the redundant
5510 # directory information. Positive numbers are
5511 # absolute block numbers. Negative block numbers
5512 # count backwards from the last block. eg 2 means
5513 # block 2, -2 means the last but one block.
5515 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5516 # This option is not active
5517 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5520 # No user value, uncomment the following line to provide one.
5522 # value_source default
5524 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5525 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5526 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5527 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5530 # The following properties are affected by this value
5531 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5532 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5533 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5537 # Pseudo-file to describe reserved area
5538 # If an area of FLASH is reserved, it is informative to
5539 # have a fis entry describing it. This option controls
5540 # creation of such an entry by default in the fis init
5543 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5544 # This option is not active
5545 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5546 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5550 # No user value, uncomment the following line to provide one.
5552 # value_source default
5556 # File to describe RedBoot boot image
5557 # Normally a ROM-startup RedBoot image is first in the
5558 # FLASH, and the system boots using that image. This
5559 # option controls creation of an entry describing it in
5560 # the fis init command. It might be disabled if a
5561 # platform has an immutable boot image of its own, where
5562 # we use a POST-startup RedBoot instead, which performs
5563 # less board initialization.
5565 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5567 # No user value, uncomment the following line to provide one.
5569 # value_source default
5572 # The following properties are affected by this value
5573 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5574 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5575 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5576 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5579 # File to describe RedBoot POST-compatible image
5580 # This option controls creation of an entry describing a
5581 # POST-startup RedBoot image in the fis init command.
5582 # Not all platforms support POST-startup. A platform
5583 # might have both for testing purposes, where the
5584 # eventual user would substitute their own POST code for
5585 # the initial ROM-startup RedBoot, and then jump to the
5586 # POST-compatible RedBoot immediately following.
5588 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5590 # No user value, uncomment the following line to provide one.
5592 # value_source default
5593 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5594 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5599 # Offset of POST image from FLASH start
5600 # This option specifies the offset for a POST image from
5601 # the start of FLASH. If unset, then the fis entry
5602 # describing the POST image will be placed where
5605 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5606 # This option is not active
5607 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5610 # No user value, uncomment the following line to provide one.
5612 # value_source default
5613 # Default value: 0 0
5614 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5615 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5616 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5619 # The following properties are affected by this value
5620 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5621 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5625 # File to describe RedBoot backup image
5626 # This option controls creation of an entry describing a
5627 # backup RedBoot image in the fis init command.
5628 # Conventionally a RAM-startup RedBoot image is kept
5629 # under this name for use in updating the ROM-based
5630 # RedBoot that boots the board.
5632 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5634 # No user value, uncomment the following line to provide one.
5636 # value_source default
5640 # Include ARM SIB ID in FIS
5641 # If set, this option will cause the last 5 words of
5642 # the FIS to include the special ID needed for the
5643 # flash to be recognized as a reserved area for RedBoot
5644 # by an ARM BootRom monitor.
5646 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5648 # No user value, uncomment the following line to provide one.
5650 # value_source default
5654 # Size of FIS directory entry
5655 # The FIS directory is limited to one single flash
5656 # sector. If your flash has tiny sectors, you may wish
5657 # to reduce this value in order to get more slots in
5658 # the FIS directory.
5660 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5662 # No user value, uncomment the following line to provide one.
5664 # value_source default
5665 # Default value: 256
5668 # Number of FIS directory entries
5669 # The FIS directory normally occupies a single flash
5670 # sector. Adjusting this value can allow for more than
5671 # one flash sector to be used, which is useful if your
5672 # sectors are very small.
5674 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5676 # No user value, uncomment the following line to provide one.
5678 # value_source default
5682 # Maximum RedBoot image size
5683 # This option controls the maximum length reserved
5684 # for the RedBoot boot image in the FIS table.
5685 # This should be a multiple of the flash's erase
5688 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5690 # No user value, uncomment the following line to provide one.
5691 # user_value 0x00020000
5692 # The inferred value should not be edited directly.
5693 inferred_value 0x00040000
5694 # value_source inferred
5695 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5696 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5700 # Offset from start of FLASH to RedBoot boot image
5701 # This option controls where the RedBoot boot image is
5702 # located relative to the start of FLASH.
5704 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5706 # No user value, uncomment the following line to provide one.
5708 # value_source default
5709 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5710 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5712 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5713 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5714 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5717 # The following properties are affected by this value
5718 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5719 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5720 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5721 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5722 # component CYGPKG_HAL_ARM_TX51_OPTIONS
5723 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5726 # Size of reserved area at start of FLASH
5727 # This option reserves an area at the start of
5728 # FLASH where RedBoot will never interfere; it is
5729 # expected that this area contains
5730 # (non-RedBoot-based) POST code or some other boot
5731 # monitor that executes before RedBoot.
5733 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5735 # No user value, uncomment the following line to provide one.
5737 # value_source default
5740 # The following properties are affected by this value
5741 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5742 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5743 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5744 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5745 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5746 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5750 # Keep all RedBoot FLASH data blocks locked.
5751 # When this option is enabled, RedBoot will keep configuration
5752 # data and the FIS directory blocks implicitly locked. While
5753 # this is somewhat safer, it does add overhead during updates.
5755 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5756 # This option is not active
5757 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5758 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5762 # No user value, uncomment the following line to provide one.
5764 # value_source default
5768 # Use CRC checksums on FIS images.
5769 # When this option is enabled, RedBoot will use CRC checksums
5770 # when reading and writing flash images.
5772 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5774 # No user value, uncomment the following line to provide one.
5776 # The inferred value should not be edited directly.
5778 # value_source inferred
5782 # ARM FLASH drivers support SIB flash block structure
5783 # This interface is implemented by a flash driver
5784 # to indicate that it supports the ARM SIB flash
5787 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5788 # No options implement this inferface
5789 # ActiveIf constraint: CYGPKG_HAL_ARM
5790 # CYGPKG_HAL_ARM == current
5793 # This value cannot be modified here.
5797 # The following properties are affected by this value
5798 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5799 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5802 # Use ARM SIB flash block structure
5803 # This option is used to interpret ARM Flash System
5804 # information blocks.
5806 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5807 # This option is not active
5808 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5809 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5813 # No user value, uncomment the following line to provide one.
5815 # value_source default
5820 # Keep RedBoot configuration data in FLASH
5821 # When this option is enabled, RedBoot will keep configuration
5822 # data in a separate block of FLASH memory. This data will
5823 # include such items as the node IP address or startup scripts.
5825 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5827 # No user value, uncomment the following line to provide one.
5829 # value_source default
5830 # Default value: CYGPKG_IO_FLASH != 0
5831 # CYGPKG_IO_FLASH == current
5834 # The following properties are affected by this value
5835 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5836 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5837 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5838 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5839 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5840 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5841 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5842 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5843 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5844 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5845 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5846 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5847 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5848 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5852 # Length of configuration data in FLASH
5853 # This option is used to control the amount of memory and FLASH
5854 # to be used for configuration options (persistent storage).
5856 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5858 # No user value, uncomment the following line to provide one.
5860 # value_source default
5861 # Default value: 4096
5864 # Style of media used for persistent data storage
5865 # Persistent data storage can either be held in 'norma' FLASH
5866 # or some other device (represented by the 'EEPROM' choice).
5867 # The different styles utilize different access methods.
5869 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5871 # No user value, uncomment the following line to provide one.
5873 # value_source default
5874 # Default value: FLASH
5875 # Legal values: "FLASH" "EEPROM"
5877 # The following properties are affected by this value
5878 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5879 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5880 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5881 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5884 # Merged config data and FIS directory
5885 # If this option is set, then the FIS directory and FLASH
5886 # configuration database will be stored in the same physical
5889 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5890 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5891 # CYGOPT_REDBOOT_FIS == 1
5892 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5896 # No user value, uncomment the following line to provide one.
5898 # value_source default
5901 # The following properties are affected by this value
5902 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5903 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5906 # Which block of flash to use
5907 # Which block of flash should hold the configuration
5908 # information. Positive numbers are absolute block numbers.
5909 # Negative block numbers count backwards from the last block.
5910 # eg 2 means block 2, -2 means the last but one block.
5912 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5914 # No user value, uncomment the following line to provide one.
5916 # value_source default
5920 # Support simple macros/aliases in FLASH
5921 # This option is used to allow support for simple text-based
5922 # macros (aliases). These aliases are kept in the FLASH
5923 # configuration data (persistent storage).
5925 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5927 # No user value, uncomment the following line to provide one.
5929 # value_source default
5933 # Length of strings in FLASH configuration data
5934 # This option is used to control the amount of memory
5935 # and FLASH to be used for string configuration
5936 # options (persistent storage).
5938 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5940 # No user value, uncomment the following line to provide one.
5942 # value_source default
5943 # Default value: 128
5946 # Length of configuration script(s) in FLASH
5947 # This option is used to control the amount of memory and
5948 # FLASH to be used for configuration options (persistent
5951 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5953 # No user value, uncomment the following line to provide one.
5955 # The inferred value should not be edited directly.
5957 # value_source inferred
5958 # Default value: 512
5961 # Fallback to read-only FLASH configuration
5962 # This option will cause the configuration information to
5963 # revert to the readonly information stored in the FLASH.
5964 # The option only takes effect after
5965 # 1) the config_ok flag has been set to be true,
5966 # indicating that at one time the copy in RAM was valid;
5968 # 2) the information in RAM has been verified to be invalid
5970 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5972 # No user value, uncomment the following line to provide one.
5974 # value_source default
5975 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5976 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5981 # Allow RedBoot to support fileio
5982 # If this option is enabled then RedBoot will provide commands
5983 # to load files from fileio file systems such as JFFS2.
5985 cdl_component CYGPKG_REDBOOT_FILEIO {
5986 # This option is not active
5987 # ActiveIf constraint: CYGPKG_IO_FILEIO
5988 # CYGPKG_IO_FILEIO (unknown) == 0
5992 # No user value, uncomment the following line to provide one.
5994 # value_source default
5997 # The following properties are affected by this value
5998 # option CYGNUM_REDBOOT_GETC_BUFFER
5999 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6003 # Include an ls command
6004 # If this option is enabled a simple ls command will be
6005 # included in redboot so the contents of a directory
6008 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6009 # This option is not active
6010 # The parent CYGPKG_REDBOOT_FILEIO is not active
6013 # No user value, uncomment the following line to provide one.
6015 # value_source default
6020 # Allow RedBoot to support disks
6021 # If this option is enabled then RedBoot will provide commands
6022 # to load disk files.
6024 cdl_component CYGPKG_REDBOOT_DISK {
6032 # Include Redboot commands for disk access
6034 cdl_option CYGSEM_REDBOOT_DISK {
6035 # This option is not active
6036 # The parent CYGPKG_REDBOOT_DISK is disabled
6039 # No user value, uncomment the following line to provide one.
6041 # value_source default
6042 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6043 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6047 # Hardware drivers for disk-type devices
6049 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6050 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6051 # This option is not active
6052 # The parent CYGPKG_REDBOOT_DISK is disabled
6054 # This value cannot be modified here.
6058 # The following properties are affected by this value
6059 # option CYGSEM_REDBOOT_DISK
6060 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6063 # Maximum number of supported disks
6064 # This option controls the number of disks supported by
6067 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6068 # This option is not active
6069 # The parent CYGPKG_REDBOOT_DISK is disabled
6072 # No user value, uncomment the following line to provide one.
6074 # value_source default
6078 # Maximum number of partitions per disk
6079 # This option controls the maximum number of supported
6080 # partitions per disk.
6082 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6083 # This option is not active
6084 # The parent CYGPKG_REDBOOT_DISK is disabled
6087 # No user value, uncomment the following line to provide one.
6089 # value_source default
6093 # Support IDE disks.
6094 # When this option is enabled, RedBoot will support IDE disks.
6096 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6097 # This option is not active
6098 # The parent CYGPKG_REDBOOT_DISK is disabled
6099 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6100 # CYGINT_HAL_PLF_IF_IDE == 0
6104 # No user value, uncomment the following line to provide one.
6106 # value_source default
6111 # Work with VMware virtual disks
6112 # This option controls the disk driver behavior at
6115 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6116 # This option is not active
6117 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6120 # No user value, uncomment the following line to provide one.
6122 # value_source default
6127 # Support Linux second extended filesystems.
6128 # When this option is enabled, RedBoot will support EXT2
6131 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6132 # This option is not active
6133 # The parent CYGPKG_REDBOOT_DISK is disabled
6136 # No user value, uncomment the following line to provide one.
6138 # value_source default
6142 # Support ISO9660 filesystems.
6143 # When this option is enabled, RedBoot will support ISO9660
6146 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6147 # This option is not active
6148 # The parent CYGPKG_REDBOOT_DISK is disabled
6150 # Calculated value: 0
6157 # doc: ref/persistent-state-flash.html
6158 # This contains options related to RedBoot's boot script
6161 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6162 # There is no associated value.
6166 # Boot scripting enabled
6167 # This option controls whether RedBoot boot script
6168 # functionality is enabled.
6170 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6171 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6172 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6173 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6176 # Calculated value: 1
6181 # Use default RedBoot boot script
6182 # If enabled, this option will tell RedBoot to use the
6183 # value of this option as a default boot script.
6185 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6187 # No user value, uncomment the following line to provide one.
6189 # The inferred value should not be edited directly.
6191 # value_source inferred
6192 # Default value: 0 0
6194 # The following properties are affected by this value
6195 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6196 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6199 # Resolution (in ms) for script timeout value.
6200 # This option controls the resolution of the script
6201 # timeout. The value is specified in milliseconds
6202 # (ms), thus to have the script timeout be defined in
6203 # terms of tenths of seconds, use 100.
6205 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6207 # No user value, uncomment the following line to provide one.
6209 # The inferred value should not be edited directly.
6211 # value_source inferred
6212 # Default value: 1000
6215 # Script default timeout value
6216 # This option is used to set the default timeout for startup
6217 # scripts, when they are enabled.
6219 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6221 # No user value, uncomment the following line to provide one.
6223 # The inferred value should not be edited directly.
6225 # value_source inferred
6230 # Support RTC for time & date functions
6231 # When this option is enabled, RedBoot will support commands to
6232 # query and set the real time clock (time and date)
6234 cdl_option CYGSEM_REDBOOT_RTC {
6235 # This option is not active
6236 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6237 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6241 # No user value, uncomment the following line to provide one.
6243 # value_source default
6247 # Behave like a ROM monitor
6248 # Enabling this option will allow RedBoot to provide ROM
6249 # monitor-style services to programs which it executes.
6251 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6252 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6253 # CYG_HAL_STARTUP == ROMRAM
6254 # CYG_HAL_STARTUP == ROMRAM
6257 # Calculated value: 1
6260 # Requires: CYGSEM_HAL_ROM_MONITOR
6261 # CYGSEM_HAL_ROM_MONITOR == 1
6265 # Allow RedBoot to handle GNUPro application 'syscalls'.
6266 # If this option is enabled then RedBoot will install a
6267 # syscall handler to support debugging of applications
6268 # based on GNUPro newlib/bsp.
6270 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6272 # No user value, uncomment the following line to provide one.
6274 # value_source default
6277 # The following properties are affected by this value
6278 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6279 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6280 # option CYGPKG_HAL_GDB_FILEIO
6281 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6285 # Support additional syscalls for 'gprof' profiling
6286 # Support additional syscalls to support a periodic callback
6287 # function for histogram-style profiling, and an enquire/set
6289 # The application must use the GNUPro newlib facilities
6292 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6293 # This option is not active
6294 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6295 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6296 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6300 # No user value, uncomment the following line to provide one.
6302 # value_source default
6306 # Does the HAL support 'gprof' profiling?
6308 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6309 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6310 # This option is not active
6311 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6313 # This value cannot be modified here.
6317 # The following properties are affected by this value
6318 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6319 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6322 # Do not raise SIGTRAP when program exits
6323 # For some (single shot) newlib based programs,
6324 # exiting and returning a termination status may be
6325 # the normal expected behavior.
6327 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6328 # This option is not active
6329 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6332 # No user value, uncomment the following line to provide one.
6334 # value_source default
6339 # Use a common buffer for Zlib and FIS
6340 # Use a common memory buffer for both the zlib workspace
6341 # and FIS directory operations. This can save a substantial
6342 # amount of RAM, especially when flash sectors are large.
6344 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6345 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6346 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6347 # CYGOPT_REDBOOT_FIS == 1
6351 # No user value, uncomment the following line to provide one.
6353 # value_source default
6358 # Size of Zlib/FIS common buffer
6359 # Size of common buffer to allocate. Must be at least the
6360 # size of one flash sector.
6362 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6363 # This option is not active
6364 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6367 # No user value, uncomment the following line to provide one.
6368 # user_value 0x0000C000
6369 # value_source default
6370 # Default value: 0x0000C000
6371 # Legal values: 0x4000 to 0x80000000
6375 # Buffer size in getc when loading images
6376 # When loading images a buffer is used between redboot and the
6377 # underlying storage medium, eg a filesystem, or a socket etc.
6378 # The size of this buffer can have a big impart on load speed.
6380 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6382 # No user value, uncomment the following line to provide one.
6384 # value_source default
6385 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6386 # CYGPKG_REDBOOT_FILEIO == 0
6391 # Redboot for ARM options
6392 # This option lists the target's requirements for a valid Redboot
6395 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6396 # ActiveIf constraint: CYGPKG_REDBOOT
6397 # CYGPKG_REDBOOT == current
6400 # There is no associated value.
6402 # The following properties are affected by this value
6406 # Provide the exec command in RedBoot
6407 # This option contains requirements for booting linux
6408 # from RedBoot. The component is enabled/disabled from
6411 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6412 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6413 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6416 # There is no associated value.
6420 # Enable -x switch for exec command.
6421 # This option allows bi-endian platforms to launch kernels
6422 # built for an endianess different than the RedBoot endianess
6424 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6426 # No user value, uncomment the following line to provide one.
6428 # value_source default
6432 # Physical base address of linux kernel
6433 # This is the physical address of the base of the
6434 # Linux kernel image.
6436 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6438 # No user value, uncomment the following line to provide one.
6439 # user_value 0x90108000
6440 # value_source default
6441 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6442 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6446 # Default physical base address of linux kernel
6447 # This is the physical address of the base of the
6448 # Linux kernel image. This option gets set by the
6451 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6453 # No user value, uncomment the following line to provide one.
6454 # user_value 0x00008000
6455 # The inferred value should not be edited directly.
6456 inferred_value 0x90108000
6457 # value_source inferred
6458 # Default value: 0x00008000
6460 # The following properties are affected by this value
6461 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6462 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6463 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
6464 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6467 # Base address of linux kernel parameter tags
6468 # This is the base address of the area of memory used to
6469 # pass parameters to the Linux kernel. This should be chosen
6470 # to avoid overlap with the kernel and any ramdisk image.
6472 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6474 # No user value, uncomment the following line to provide one.
6475 # user_value 0x00000100
6476 # value_source default
6477 # Default value: 0x00000100
6482 # Redboot HAL options
6483 # This option lists the target's requirements for a valid Redboot
6486 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6487 # ActiveIf constraint: CYGPKG_REDBOOT
6488 # CYGPKG_REDBOOT == current
6491 # There is no associated value.
6495 # Build Redboot ROM binary image
6496 # This option enables the conversion of the Redboot ELF
6497 # image to a binary image suitable for ROM programming.
6499 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6500 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6501 # CYGBLD_BUILD_REDBOOT == 1
6505 # No user value, uncomment the following line to provide one.
6507 # value_source default
6512 # Redboot HAL variant options
6514 cdl_component CYGPKG_REDBOOT_HAL_TX51_OPTIONS {
6515 # ActiveIf constraint: CYGPKG_REDBOOT
6516 # CYGPKG_REDBOOT == current
6519 # There is no associated value.
6520 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6521 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6526 # ISO C and POSIX infrastructure
6527 # eCos supports implementations of ISO C libraries and POSIX
6528 # implementations. This package provides infrastructure used by
6529 # all such implementations.
6531 cdl_package CYGPKG_ISOINFRA {
6532 # Packages cannot be added or removed, nor can their version be changed,
6533 # simply by editing their value. Instead the appropriate configuration
6534 # should be used to perform these actions.
6536 # This value cannot be modified here.
6538 # Current value: 1 current
6540 # The following properties are affected by this value
6541 # component CYGBLD_BUILD_REDBOOT
6542 # Requires: CYGPKG_ISOINFRA
6543 # package CYGPKG_LIBC_STRING
6544 # Requires: CYGPKG_ISOINFRA
6545 # package CYGPKG_COMPRESS_ZLIB
6546 # Requires: CYGPKG_ISOINFRA
6547 # package CYGPKG_IO_FLASH
6548 # Requires: CYGPKG_ISOINFRA
6549 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6550 # Requires: CYGPKG_ISOINFRA
6551 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6552 # DefaultValue: 0 != CYGPKG_ISOINFRA
6553 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6554 # ActiveIf: CYGPKG_ISOINFRA
6555 # package CYGPKG_LIBC_I18N
6556 # Requires: CYGPKG_ISOINFRA
6557 # package CYGPKG_LIBC_STDLIB
6558 # Requires: CYGPKG_ISOINFRA
6562 # Startup and termination
6564 cdl_component CYGPKG_ISO_STARTUP {
6565 # There is no associated value.
6569 # main() startup implementations
6570 # Implementations of this interface arrange for a user-supplied
6571 # main() to be called in an ISO compatible environment.
6573 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6574 # No options implement this inferface
6575 # This value cannot be modified here.
6578 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6579 # CYGINT_ISO_MAIN_STARTUP == 0
6582 # The following properties are affected by this value
6583 # interface CYGINT_ISO_MAIN_STARTUP
6584 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6587 # environ implementations
6588 # Implementations of this interface provide the environ
6589 # variable required by POSIX.
6591 cdl_interface CYGINT_ISO_ENVIRON {
6592 # No options implement this inferface
6593 # This value cannot be modified here.
6596 # Requires: 1 >= CYGINT_ISO_ENVIRON
6597 # CYGINT_ISO_ENVIRON == 0
6600 # The following properties are affected by this value
6601 # interface CYGINT_ISO_ENVIRON
6602 # Requires: 1 >= CYGINT_ISO_ENVIRON
6608 cdl_component CYGPKG_ISO_CTYPE_H {
6609 # There is no associated value.
6613 # Number of implementations of ctype functions
6615 cdl_interface CYGINT_ISO_CTYPE {
6616 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6617 # This value cannot be modified here.
6620 # Requires: 1 >= CYGINT_ISO_CTYPE
6621 # CYGINT_ISO_CTYPE == 1
6624 # The following properties are affected by this value
6625 # interface CYGINT_ISO_CTYPE
6626 # Requires: 1 >= CYGINT_ISO_CTYPE
6627 # package CYGPKG_HAL_ARM_TX51KARO
6628 # Requires: CYGINT_ISO_CTYPE
6629 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6630 # Requires: CYGINT_ISO_CTYPE
6631 # package CYGPKG_LIBC_STDLIB
6632 # Requires: CYGINT_ISO_CTYPE
6635 # Ctype implementation header
6637 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6639 # No user value, uncomment the following line to provide one.
6641 # The inferred value should not be edited directly.
6642 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6643 # value_source inferred
6644 # Default value: 0 0
6646 # The following properties are affected by this value
6647 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6648 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6649 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6650 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6656 cdl_component CYGPKG_ISO_ERRNO {
6657 # There is no associated value.
6661 # Number of implementations of error codes
6663 cdl_interface CYGINT_ISO_ERRNO_CODES {
6664 # Implemented by CYGPKG_ERROR, active, enabled
6665 # This value cannot be modified here.
6668 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6669 # CYGINT_ISO_ERRNO_CODES == 1
6672 # The following properties are affected by this value
6673 # interface CYGINT_ISO_ERRNO_CODES
6674 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6677 # Error codes implementation header
6679 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6681 # No user value, uncomment the following line to provide one.
6683 # The inferred value should not be edited directly.
6684 inferred_value 1 <cyg/error/codes.h>
6685 # value_source inferred
6686 # Default value: 0 0
6688 # The following properties are affected by this value
6689 # package CYGPKG_ERROR
6690 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6693 # Number of implementations of errno variable
6695 cdl_interface CYGINT_ISO_ERRNO {
6696 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6697 # This value cannot be modified here.
6700 # Requires: 1 >= CYGINT_ISO_ERRNO
6701 # CYGINT_ISO_ERRNO == 1
6704 # The following properties are affected by this value
6705 # interface CYGINT_ISO_ERRNO
6706 # Requires: 1 >= CYGINT_ISO_ERRNO
6709 # errno variable implementation header
6711 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6713 # No user value, uncomment the following line to provide one.
6715 # The inferred value should not be edited directly.
6716 inferred_value 1 <cyg/error/errno.h>
6717 # value_source inferred
6718 # Default value: 0 0
6720 # The following properties are affected by this value
6721 # component CYGPKG_ERROR_ERRNO
6722 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6726 # Locale-related functions
6728 cdl_component CYGPKG_ISO_LOCALE {
6729 # There is no associated value.
6733 # Number of implementations of locale functions
6735 cdl_interface CYGINT_ISO_LOCALE {
6736 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6737 # This value cannot be modified here.
6740 # Requires: 1 >= CYGINT_ISO_LOCALE
6741 # CYGINT_ISO_LOCALE == 1
6744 # The following properties are affected by this value
6745 # interface CYGINT_ISO_LOCALE
6746 # Requires: 1 >= CYGINT_ISO_LOCALE
6749 # Locale implementation header
6751 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6753 # No user value, uncomment the following line to provide one.
6755 # value_source default
6756 # Default value: 0 0
6760 # Standard I/O-related functionality
6762 cdl_component CYGPKG_ISO_STDIO {
6763 # There is no associated value.
6767 # Number of implementations of stdio file types
6769 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6770 # No options implement this inferface
6771 # This value cannot be modified here.
6773 # Current value: 0 0
6774 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6775 # CYGINT_ISO_STDIO_FILETYPES == 0
6778 # The following properties are affected by this value
6779 # interface CYGINT_ISO_STDIO_FILETYPES
6780 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6783 # Stdio file types implementation header
6785 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6787 # No user value, uncomment the following line to provide one.
6789 # value_source default
6790 # Default value: 0 0
6793 # Stdio standard streams implementations
6795 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6796 # No options implement this inferface
6797 # This value cannot be modified here.
6799 # Current value: 0 0
6800 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6801 # CYGINT_ISO_STDIO_STREAMS == 0
6804 # The following properties are affected by this value
6805 # interface CYGINT_ISO_STDIO_STREAMS
6806 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6809 # Stdio standard streams implementation header
6810 # This header file must define stdin, stdout
6813 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6815 # No user value, uncomment the following line to provide one.
6817 # value_source default
6818 # Default value: 0 0
6821 # Number of implementations of stdio file operations
6823 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6824 # No options implement this inferface
6825 # This value cannot be modified here.
6827 # Current value: 0 0
6828 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6829 # CYGINT_ISO_STDIO_FILEOPS == 0
6832 # The following properties are affected by this value
6833 # interface CYGINT_ISO_STDIO_FILEOPS
6834 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6837 # Stdio file operations implementation header
6838 # This header controls the file system operations on a file
6839 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6842 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6844 # No user value, uncomment the following line to provide one.
6846 # value_source default
6847 # Default value: 0 0
6850 # Number of implementations of stdio file access functionals
6852 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6853 # No options implement this inferface
6854 # This value cannot be modified here.
6856 # Current value: 0 0
6857 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6858 # CYGINT_ISO_STDIO_FILEACCESS == 0
6861 # The following properties are affected by this value
6862 # interface CYGINT_ISO_STDIO_FILEACCESS
6863 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6864 # option CYGFUN_COMPRESS_ZLIB_GZIO
6865 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6868 # Stdio file access implementation header
6869 # This header controls the file access operations
6870 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6871 # setvbuf(), and associated constants.
6873 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6875 # No user value, uncomment the following line to provide one.
6877 # value_source default
6878 # Default value: 0 0
6881 # Number of implementations of stdio formatted I/O
6883 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6884 # No options implement this inferface
6885 # This value cannot be modified here.
6887 # Current value: 0 0
6888 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6889 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6892 # The following properties are affected by this value
6893 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6894 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6895 # option CYGFUN_COMPRESS_ZLIB_GZIO
6896 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6899 # Stdio formatted I/O implementation header
6901 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6903 # No user value, uncomment the following line to provide one.
6905 # value_source default
6906 # Default value: 0 0
6909 # Number of implementations of stdio character I/O
6911 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6912 # No options implement this inferface
6913 # This value cannot be modified here.
6915 # Current value: 0 0
6916 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6917 # CYGINT_ISO_STDIO_CHAR_IO == 0
6920 # The following properties are affected by this value
6921 # interface CYGINT_ISO_STDIO_CHAR_IO
6922 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6925 # Stdio character I/O implementation header
6927 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6929 # No user value, uncomment the following line to provide one.
6931 # value_source default
6932 # Default value: 0 0
6935 # Number of implementations of stdio direct I/O
6937 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6938 # No options implement this inferface
6939 # This value cannot be modified here.
6941 # Current value: 0 0
6942 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6943 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6946 # The following properties are affected by this value
6947 # interface CYGINT_ISO_STDIO_DIRECT_IO
6948 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6951 # Stdio direct I/O implementation header
6953 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6955 # No user value, uncomment the following line to provide one.
6957 # value_source default
6958 # Default value: 0 0
6961 # Number of implementations of stdio file positioning
6963 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6964 # No options implement this inferface
6965 # This value cannot be modified here.
6967 # Current value: 0 0
6968 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6969 # CYGINT_ISO_STDIO_FILEPOS == 0
6972 # The following properties are affected by this value
6973 # interface CYGINT_ISO_STDIO_FILEPOS
6974 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6975 # option CYGFUN_COMPRESS_ZLIB_GZIO
6976 # Requires: CYGINT_ISO_STDIO_FILEPOS
6979 # Stdio file positioning implementation header
6981 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6983 # No user value, uncomment the following line to provide one.
6985 # value_source default
6986 # Default value: 0 0
6989 # Number of implementations of stdio error handling
6991 cdl_interface CYGINT_ISO_STDIO_ERROR {
6992 # No options implement this inferface
6993 # This value cannot be modified here.
6995 # Current value: 0 0
6996 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6997 # CYGINT_ISO_STDIO_ERROR == 0
7000 # The following properties are affected by this value
7001 # interface CYGINT_ISO_STDIO_ERROR
7002 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7005 # Stdio error handling implementation header
7007 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7009 # No user value, uncomment the following line to provide one.
7011 # value_source default
7012 # Default value: 0 0
7015 # POSIX fd-related function implementations
7017 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7018 # No options implement this inferface
7019 # This value cannot be modified here.
7021 # Current value: 0 0
7022 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7023 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7026 # The following properties are affected by this value
7027 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7028 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7031 # POSIX fd-related function implementation header
7033 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7035 # No user value, uncomment the following line to provide one.
7037 # value_source default
7038 # Default value: 0 0
7042 # Standard general utility functions
7044 cdl_component CYGPKG_ISO_STDLIB {
7045 # There is no associated value.
7049 # String conversion function implementations
7051 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7052 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7053 # This value cannot be modified here.
7056 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7057 # CYGINT_ISO_STDLIB_STRCONV == 1
7060 # The following properties are affected by this value
7061 # interface CYGINT_ISO_STDLIB_STRCONV
7062 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7065 # String conversion function implementation header
7067 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7069 # No user value, uncomment the following line to provide one.
7071 # The inferred value should not be edited directly.
7072 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7073 # value_source inferred
7074 # Default value: 0 0
7076 # The following properties are affected by this value
7077 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7078 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7081 # String to FP conversion function implementations
7083 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7084 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7085 # This value cannot be modified here.
7088 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7089 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7092 # The following properties are affected by this value
7093 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7094 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7097 # String to FP conversion function implementation header
7099 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7101 # No user value, uncomment the following line to provide one.
7103 # value_source default
7104 # Default value: 0 0
7107 # Random number generator implementations
7109 cdl_interface CYGINT_ISO_RAND {
7110 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7111 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7112 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7113 # This value cannot be modified here.
7116 # Requires: 1 >= CYGINT_ISO_RAND
7117 # CYGINT_ISO_RAND == 1
7120 # The following properties are affected by this value
7121 # interface CYGINT_ISO_RAND
7122 # Requires: 1 >= CYGINT_ISO_RAND
7125 # Random number generator implementation header
7127 cdl_option CYGBLD_ISO_RAND_HEADER {
7129 # No user value, uncomment the following line to provide one.
7131 # value_source default
7132 # Default value: 0 0
7135 # Malloc implementations
7137 cdl_interface CYGINT_ISO_MALLOC {
7138 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7139 # This value cannot be modified here.
7142 # Requires: 1 >= CYGINT_ISO_MALLOC
7143 # CYGINT_ISO_MALLOC == 1
7146 # The following properties are affected by this value
7147 # interface CYGINT_ISO_MALLOC
7148 # Requires: 1 >= CYGINT_ISO_MALLOC
7149 # option CYGFUN_LIBC_STRING_STRDUP
7150 # ActiveIf: CYGINT_ISO_MALLOC
7153 # Malloc implementation header
7155 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7157 # No user value, uncomment the following line to provide one.
7159 # value_source default
7160 # Default value: 0 0
7163 # Mallinfo() implementations
7165 cdl_interface CYGINT_ISO_MALLINFO {
7166 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7167 # This value cannot be modified here.
7170 # Requires: 1 >= CYGINT_ISO_MALLINFO
7171 # CYGINT_ISO_MALLINFO == 1
7174 # The following properties are affected by this value
7175 # interface CYGINT_ISO_MALLINFO
7176 # Requires: 1 >= CYGINT_ISO_MALLINFO
7179 # Mallinfo() implementation header
7181 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7183 # No user value, uncomment the following line to provide one.
7185 # value_source default
7186 # Default value: 0 0
7189 # Program exit functionality implementations
7191 cdl_interface CYGINT_ISO_EXIT {
7192 # No options implement this inferface
7193 # This value cannot be modified here.
7196 # Requires: 1 >= CYGINT_ISO_EXIT
7197 # CYGINT_ISO_EXIT == 0
7200 # The following properties are affected by this value
7201 # interface CYGINT_ISO_EXIT
7202 # Requires: 1 >= CYGINT_ISO_EXIT
7203 # option CYGFUN_INFRA_DUMMY_ABORT
7204 # Requires: !CYGINT_ISO_EXIT
7205 # option CYGFUN_INFRA_DUMMY_ABORT
7206 # DefaultValue: CYGINT_ISO_EXIT == 0
7209 # Program exit functionality implementation header
7211 cdl_option CYGBLD_ISO_EXIT_HEADER {
7213 # No user value, uncomment the following line to provide one.
7215 # value_source default
7216 # Default value: 0 0
7219 # Program environment implementations
7221 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7222 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7223 # This value cannot be modified here.
7226 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7227 # CYGINT_ISO_STDLIB_ENVIRON == 1
7230 # The following properties are affected by this value
7231 # interface CYGINT_ISO_STDLIB_ENVIRON
7232 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7235 # Program environment implementation header
7237 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7239 # No user value, uncomment the following line to provide one.
7241 # value_source default
7242 # Default value: 0 0
7245 # system() implementations
7247 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7248 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7249 # This value cannot be modified here.
7252 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7253 # CYGINT_ISO_STDLIB_SYSTEM == 1
7256 # The following properties are affected by this value
7257 # interface CYGINT_ISO_STDLIB_SYSTEM
7258 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7261 # system() implementation header
7263 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7265 # No user value, uncomment the following line to provide one.
7267 # value_source default
7268 # Default value: 0 0
7271 # bsearch() implementations
7273 cdl_interface CYGINT_ISO_BSEARCH {
7274 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7275 # This value cannot be modified here.
7278 # Requires: 1 >= CYGINT_ISO_BSEARCH
7279 # CYGINT_ISO_BSEARCH == 1
7282 # The following properties are affected by this value
7283 # interface CYGINT_ISO_BSEARCH
7284 # Requires: 1 >= CYGINT_ISO_BSEARCH
7287 # bsearch() implementation header
7289 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7291 # No user value, uncomment the following line to provide one.
7293 # value_source default
7294 # Default value: 0 0
7297 # qsort() implementations
7299 cdl_interface CYGINT_ISO_QSORT {
7300 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7301 # This value cannot be modified here.
7304 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7305 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7308 # The following properties are affected by this value
7311 # qsort() implementation header
7313 cdl_option CYGBLD_ISO_QSORT_HEADER {
7315 # No user value, uncomment the following line to provide one.
7317 # value_source default
7318 # Default value: 0 0
7321 # abs()/labs() implementations
7323 cdl_interface CYGINT_ISO_ABS {
7324 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7325 # This value cannot be modified here.
7328 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7329 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7332 # The following properties are affected by this value
7335 # abs()/labs() implementation header
7337 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7339 # No user value, uncomment the following line to provide one.
7341 # The inferred value should not be edited directly.
7342 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7343 # value_source inferred
7344 # Default value: 0 0
7346 # The following properties are affected by this value
7347 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7348 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7351 # div()/ldiv() implementations
7353 cdl_interface CYGINT_ISO_DIV {
7354 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7355 # This value cannot be modified here.
7358 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7359 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7362 # The following properties are affected by this value
7365 # div()/ldiv() implementation header
7367 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7369 # No user value, uncomment the following line to provide one.
7371 # The inferred value should not be edited directly.
7372 inferred_value 1 <cyg/libc/stdlib/div.inl>
7373 # value_source inferred
7374 # Default value: 0 0
7376 # The following properties are affected by this value
7377 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7378 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7381 # Header defining the implementation's MB_CUR_MAX
7383 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7385 # No user value, uncomment the following line to provide one.
7387 # value_source default
7388 # Default value: 0 0
7390 # The following properties are affected by this value
7391 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7392 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7395 # Multibyte character implementations
7397 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7398 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7399 # This value cannot be modified here.
7402 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7403 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7406 # The following properties are affected by this value
7407 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7408 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7411 # Multibyte character implementation header
7413 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7415 # No user value, uncomment the following line to provide one.
7417 # value_source default
7418 # Default value: 0 0
7424 cdl_component CYGPKG_ISO_STRING {
7425 # There is no associated value.
7429 # Number of implementations of strerror() function
7431 cdl_interface CYGINT_ISO_STRERROR {
7432 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7433 # This value cannot be modified here.
7435 # Current value: 1 1
7436 # Requires: 1 >= CYGINT_ISO_STRERROR
7437 # CYGINT_ISO_STRERROR == 1
7440 # The following properties are affected by this value
7441 # interface CYGINT_ISO_STRERROR
7442 # Requires: 1 >= CYGINT_ISO_STRERROR
7445 # strerror() implementation header
7447 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7449 # No user value, uncomment the following line to provide one.
7451 # The inferred value should not be edited directly.
7452 inferred_value 1 <cyg/error/strerror.h>
7453 # value_source inferred
7454 # Default value: 0 0
7456 # The following properties are affected by this value
7457 # option CYGPKG_ERROR_STRERROR
7458 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7461 # memcpy() implementation header
7463 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7465 # No user value, uncomment the following line to provide one.
7467 # value_source default
7468 # Default value: 0 0
7471 # memset() implementation header
7473 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7475 # No user value, uncomment the following line to provide one.
7477 # value_source default
7478 # Default value: 0 0
7481 # Number of implementations of strtok_r() function
7483 cdl_interface CYGINT_ISO_STRTOK_R {
7484 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7485 # This value cannot be modified here.
7487 # Current value: 1 1
7488 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7489 # CYGINT_ISO_STRTOK_R == 1
7492 # The following properties are affected by this value
7493 # interface CYGINT_ISO_STRTOK_R
7494 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7497 # strtok_r() implementation header
7499 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7501 # No user value, uncomment the following line to provide one.
7503 # The inferred value should not be edited directly.
7504 inferred_value 1 <cyg/libc/string/string.h>
7505 # value_source inferred
7506 # Default value: 0 0
7508 # The following properties are affected by this value
7509 # package CYGPKG_LIBC_STRING
7510 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7513 # Number of implementations of locale-specific string functions
7514 # This covers locale-dependent string functions such as strcoll()
7517 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7518 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7519 # This value cannot be modified here.
7521 # Current value: 1 1
7522 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7523 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7526 # The following properties are affected by this value
7527 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7528 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7531 # Locale-specific string functions' implementation header
7532 # This covers locale-dependent string functions such as strcoll()
7535 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7537 # No user value, uncomment the following line to provide one.
7539 # The inferred value should not be edited directly.
7540 inferred_value 1 <cyg/libc/string/string.h>
7541 # value_source inferred
7542 # Default value: 0 0
7544 # The following properties are affected by this value
7545 # package CYGPKG_LIBC_STRING
7546 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7549 # Number of implementations of BSD string functions
7551 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7552 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7553 # This value cannot be modified here.
7555 # Current value: 0 0
7556 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7557 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7560 # The following properties are affected by this value
7561 # interface CYGINT_ISO_STRING_BSD_FUNCS
7562 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7565 # BSD string functions' implementation header
7567 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7569 # No user value, uncomment the following line to provide one.
7571 # The inferred value should not be edited directly.
7572 inferred_value 1 <cyg/libc/string/bsdstring.h>
7573 # value_source inferred
7574 # Default value: 0 0
7576 # The following properties are affected by this value
7577 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7578 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7581 # Number of implementations of other mem*() functions
7583 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7584 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7585 # This value cannot be modified here.
7587 # Current value: 1 1
7588 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7589 # CYGINT_ISO_STRING_MEMFUNCS == 1
7592 # The following properties are affected by this value
7593 # interface CYGINT_ISO_STRING_MEMFUNCS
7594 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7595 # component CYGBLD_BUILD_REDBOOT
7596 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7597 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7598 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7601 # Other mem*() functions' implementation header
7603 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7605 # No user value, uncomment the following line to provide one.
7607 # The inferred value should not be edited directly.
7608 inferred_value 1 <cyg/libc/string/string.h>
7609 # value_source inferred
7610 # Default value: 0 0
7612 # The following properties are affected by this value
7613 # package CYGPKG_LIBC_STRING
7614 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7617 # Number of implementations of other ISO C str*() functions
7618 # This covers the other str*() functions defined by ISO C.
7620 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7621 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7622 # This value cannot be modified here.
7624 # Current value: 1 1
7625 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7626 # CYGINT_ISO_STRING_STRFUNCS == 1
7629 # The following properties are affected by this value
7630 # interface CYGINT_ISO_STRING_STRFUNCS
7631 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7632 # option CYGFUN_INFRA_DUMMY_STRLEN
7633 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7634 # option CYGFUN_INFRA_DUMMY_STRLEN
7635 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7636 # component CYGBLD_BUILD_REDBOOT
7637 # Requires: CYGINT_ISO_STRING_STRFUNCS
7638 # component CYGPKG_IO_ETH_DRIVERS_NET
7639 # Requires: CYGINT_ISO_STRING_STRFUNCS
7640 # option CYGFUN_COMPRESS_ZLIB_GZIO
7641 # Requires: CYGINT_ISO_STRING_STRFUNCS
7642 # package CYGPKG_IO_FLASH
7643 # Requires: CYGINT_ISO_STRING_STRFUNCS
7644 # package CYGPKG_LIBC_STDLIB
7645 # Requires: CYGINT_ISO_STRING_STRFUNCS
7648 # Other ISO C str*() functions' implementation header
7649 # This covers the other str*() functions defined by ISO C.
7651 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7653 # No user value, uncomment the following line to provide one.
7655 # The inferred value should not be edited directly.
7656 inferred_value 1 <cyg/libc/string/string.h>
7657 # value_source inferred
7658 # Default value: 0 0
7660 # The following properties are affected by this value
7661 # package CYGPKG_LIBC_STRING
7662 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7666 # Clock and time functionality
7668 cdl_component CYGPKG_ISO_TIME {
7669 # There is no associated value.
7673 # time_t implementation header
7675 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7677 # No user value, uncomment the following line to provide one.
7679 # value_source default
7680 # Default value: 0 0
7683 # clock_t implementation header
7685 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7687 # No user value, uncomment the following line to provide one.
7689 # value_source default
7690 # Default value: 0 0
7693 # struct timeval implementation header
7695 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7697 # No user value, uncomment the following line to provide one.
7699 # value_source default
7700 # Default value: 0 0
7703 # fnmatch implementation header
7705 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7707 # No user value, uncomment the following line to provide one.
7709 # value_source default
7710 # Default value: 0 0
7713 # Number of implementations of POSIX timer types
7715 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7716 # No options implement this inferface
7717 # This value cannot be modified here.
7719 # Current value: 0 0
7720 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7721 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7724 # The following properties are affected by this value
7725 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7726 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7729 # POSIX timer types implementation header
7731 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7733 # No user value, uncomment the following line to provide one.
7735 # value_source default
7736 # Default value: 0 0
7739 # Number of implementations of POSIX clock types
7741 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7742 # No options implement this inferface
7743 # This value cannot be modified here.
7745 # Current value: 0 0
7746 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7747 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7750 # The following properties are affected by this value
7751 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7752 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7755 # POSIX clock types implementation header
7757 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7759 # No user value, uncomment the following line to provide one.
7761 # value_source default
7762 # Default value: 0 0
7765 # Number of implementations of ISO C types
7767 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7768 # No options implement this inferface
7769 # This value cannot be modified here.
7771 # Current value: 0 0
7772 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7773 # CYGINT_ISO_C_TIME_TYPES == 0
7776 # The following properties are affected by this value
7777 # interface CYGINT_ISO_C_TIME_TYPES
7778 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7781 # ISO C time types implementation header
7783 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7785 # No user value, uncomment the following line to provide one.
7787 # value_source default
7788 # Default value: 0 0
7791 # Number of implementations of POSIX timers
7793 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7794 # No options implement this inferface
7795 # This value cannot be modified here.
7797 # Current value: 0 0
7798 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7799 # CYGINT_ISO_POSIX_TIMERS == 0
7802 # The following properties are affected by this value
7803 # interface CYGINT_ISO_POSIX_TIMERS
7804 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7807 # POSIX timer implementation header
7809 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7811 # No user value, uncomment the following line to provide one.
7813 # value_source default
7814 # Default value: 0 0
7817 # Number of implementations of POSIX clocks
7819 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7820 # No options implement this inferface
7821 # This value cannot be modified here.
7823 # Current value: 0 0
7824 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7825 # CYGINT_ISO_POSIX_CLOCKS == 0
7828 # The following properties are affected by this value
7829 # interface CYGINT_ISO_POSIX_CLOCKS
7830 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7833 # POSIX clocks implementation header
7835 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7837 # No user value, uncomment the following line to provide one.
7839 # value_source default
7840 # Default value: 0 0
7843 # Number of implementations of ISO C clock functions
7845 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7846 # No options implement this inferface
7847 # This value cannot be modified here.
7849 # Current value: 0 0
7850 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7851 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7854 # The following properties are affected by this value
7855 # interface CYGINT_ISO_C_CLOCK_FUNCS
7856 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7859 # ISO C clock functions' implementation header
7861 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7863 # No user value, uncomment the following line to provide one.
7865 # value_source default
7866 # Default value: 0 0
7869 # Number of implementations of tzset() function
7871 cdl_interface CYGINT_ISO_TZSET {
7872 # No options implement this inferface
7873 # This value cannot be modified here.
7875 # Current value: 0 0
7876 # Requires: 1 >= CYGINT_ISO_TZSET
7877 # CYGINT_ISO_TZSET == 0
7880 # The following properties are affected by this value
7881 # interface CYGINT_ISO_TZSET
7882 # Requires: 1 >= CYGINT_ISO_TZSET
7885 # tzset() implementation header
7887 cdl_option CYGBLD_ISO_TZSET_HEADER {
7889 # No user value, uncomment the following line to provide one.
7891 # value_source default
7892 # Default value: 0 0
7896 # Signal functionality
7898 cdl_component CYGPKG_ISO_SIGNAL {
7899 # There is no associated value.
7903 # Number of implementations of signal numbers
7905 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7906 # No options implement this inferface
7907 # This value cannot be modified here.
7910 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7911 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7914 # The following properties are affected by this value
7915 # interface CYGINT_ISO_SIGNAL_NUMBERS
7916 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7919 # Signal numbering implementation header
7920 # This header provides the mapping of signal
7921 # names (e.g. SIGBUS) to numbers.
7923 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7925 # No user value, uncomment the following line to provide one.
7927 # value_source default
7928 # Default value: 0 0
7931 # Number of signal implementations
7933 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7934 # No options implement this inferface
7935 # This value cannot be modified here.
7938 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7939 # CYGINT_ISO_SIGNAL_IMPL == 0
7942 # The following properties are affected by this value
7943 # interface CYGINT_ISO_SIGNAL_IMPL
7944 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7947 # Signals implementation header
7949 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7951 # No user value, uncomment the following line to provide one.
7953 # value_source default
7954 # Default value: 0 0
7957 # POSIX real time signals feature test macro
7958 # This defines the POSIX feature test macro
7959 # that indicates that the POSIX real time signals
7962 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7963 # No options implement this inferface
7964 # This value cannot be modified here.
7967 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7968 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7971 # The following properties are affected by this value
7972 # interface CYGINT_POSIX_REALTIME_SIGNALS
7973 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7977 # Non-local jumps functionality
7979 cdl_component CYGPKG_ISO_SETJMP {
7980 # There is no associated value.
7984 # setjmp() / longjmp() implementations
7986 cdl_interface CYGINT_ISO_SETJMP {
7987 # No options implement this inferface
7988 # This value cannot be modified here.
7991 # Requires: 1 >= CYGINT_ISO_SETJMP
7992 # CYGINT_ISO_SETJMP == 0
7995 # The following properties are affected by this value
7996 # interface CYGINT_ISO_SETJMP
7997 # Requires: 1 >= CYGINT_ISO_SETJMP
8000 # setjmp() / longjmp() implementation header
8002 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8004 # No user value, uncomment the following line to provide one.
8006 # value_source default
8007 # Default value: 0 0
8010 # sigsetjmp() / siglongjmp() implementations
8012 cdl_interface CYGINT_ISO_SIGSETJMP {
8013 # No options implement this inferface
8014 # This value cannot be modified here.
8017 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8018 # CYGINT_ISO_SIGSETJMP == 0
8021 # The following properties are affected by this value
8022 # interface CYGINT_ISO_SIGSETJMP
8023 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8026 # sigsetjmp() / siglongjmp() implementation header
8028 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8030 # No user value, uncomment the following line to provide one.
8032 # value_source default
8033 # Default value: 0 0
8037 # Assertions implementation header
8039 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8041 # No user value, uncomment the following line to provide one.
8043 # value_source default
8044 # Default value: 0 0
8047 # POSIX file control
8048 # This covers the POSIX file control definitions,
8049 # normally found in <fcntl.h>
8051 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8052 # There is no associated value.
8056 # POSIX open flags implementation header
8058 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8060 # No user value, uncomment the following line to provide one.
8062 # value_source default
8063 # Default value: 0 0
8066 # POSIX fcntl() implementations
8068 cdl_interface CYGINT_ISO_FCNTL {
8069 # No options implement this inferface
8070 # This value cannot be modified here.
8073 # Requires: 1 >= CYGINT_ISO_FCNTL
8074 # CYGINT_ISO_FCNTL == 0
8077 # The following properties are affected by this value
8078 # interface CYGINT_ISO_FCNTL
8079 # Requires: 1 >= CYGINT_ISO_FCNTL
8082 # POSIX fcntl() implementation header
8084 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8086 # No user value, uncomment the following line to provide one.
8088 # value_source default
8089 # Default value: 0 0
8092 # POSIX file open implementations
8094 cdl_interface CYGINT_ISO_OPEN {
8095 # No options implement this inferface
8096 # This value cannot be modified here.
8099 # Requires: 1 >= CYGINT_ISO_OPEN
8100 # CYGINT_ISO_OPEN == 0
8103 # The following properties are affected by this value
8104 # interface CYGINT_ISO_OPEN
8105 # Requires: 1 >= CYGINT_ISO_OPEN
8108 # POSIX file open implementation header
8110 cdl_option CYGBLD_ISO_OPEN_HEADER {
8112 # No user value, uncomment the following line to provide one.
8114 # value_source default
8115 # Default value: 0 0
8119 # <sys/stat.h> definitions implementation header
8121 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8123 # No user value, uncomment the following line to provide one.
8125 # value_source default
8126 # Default value: 0 0
8129 # POSIX directory reading implementation
8131 cdl_interface CYGINT_ISO_DIRENT {
8132 # No options implement this inferface
8133 # This value cannot be modified here.
8136 # Requires: 1 >= CYGINT_ISO_DIRENT
8137 # CYGINT_ISO_DIRENT == 0
8140 # The following properties are affected by this value
8141 # interface CYGINT_ISO_DIRENT
8142 # Requires: 1 >= CYGINT_ISO_DIRENT
8145 # <dirent.h> definitions implementation header
8147 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8149 # No user value, uncomment the following line to provide one.
8151 # value_source default
8152 # Default value: 0 0
8155 # POSIX <sys/types.h> contents
8156 # This covers the types required by POSIX to be in
8159 cdl_component CYGPKG_ISO_POSIX_TYPES {
8160 # There is no associated value.
8164 # POSIX thread types implementations
8166 cdl_interface CYGINT_ISO_PTHREADTYPES {
8167 # No options implement this inferface
8168 # This value cannot be modified here.
8171 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8172 # CYGINT_ISO_PTHREADTYPES == 0
8175 # The following properties are affected by this value
8176 # interface CYGINT_ISO_PTHREADTYPES
8177 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8178 # interface CYGINT_ISO_PMUTEXTYPES
8179 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8182 # POSIX thread types implementation header
8184 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8186 # No user value, uncomment the following line to provide one.
8188 # value_source default
8189 # Default value: 0 0
8192 # POSIX mutex types implementations
8194 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8195 # No options implement this inferface
8196 # This value cannot be modified here.
8199 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8200 # CYGINT_ISO_PTHREADTYPES == 0
8204 # POSIX mutex types implementation header
8206 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8208 # No user value, uncomment the following line to provide one.
8210 # value_source default
8211 # Default value: 0 0
8214 # ssize_t implementation header
8216 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8218 # No user value, uncomment the following line to provide one.
8220 # value_source default
8221 # Default value: 0 0
8224 # Filesystem types implementation header
8226 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8228 # No user value, uncomment the following line to provide one.
8230 # value_source default
8231 # Default value: 0 0
8234 # gid_t, pid_t, uid_t implementation header
8236 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8238 # No user value, uncomment the following line to provide one.
8240 # value_source default
8241 # Default value: 0 0
8245 # Non-POSIX <sys/types.h> contents
8246 # This covers the extra types required by non-POSIX
8247 # packages to be in <sys/types.h>. These would normally
8248 # only be visible if _POSIX_SOURCE is not defined.
8250 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8251 # There is no associated value.
8255 # BSD compatible types
8257 cdl_interface CYGINT_ISO_BSDTYPES {
8258 # No options implement this inferface
8259 # This value cannot be modified here.
8262 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8263 # CYGINT_ISO_BSDTYPES == 0
8266 # The following properties are affected by this value
8267 # interface CYGINT_ISO_BSDTYPES
8268 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8273 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8275 # No user value, uncomment the following line to provide one.
8277 # value_source default
8278 # Default value: 0 0
8284 cdl_component CYGPKG_ISO_UTSNAME {
8285 # There is no associated value.
8291 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8293 # No user value, uncomment the following line to provide one.
8295 # value_source default
8296 # Default value: 0 0
8302 cdl_component CYGPKG_ISO_SCHED {
8303 # There is no associated value.
8307 # POSIX scheduler implementations
8309 cdl_interface CYGINT_ISO_SCHED_IMPL {
8310 # No options implement this inferface
8311 # This value cannot be modified here.
8314 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8315 # CYGINT_ISO_SCHED_IMPL == 0
8318 # The following properties are affected by this value
8319 # interface CYGINT_ISO_SCHED_IMPL
8320 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8323 # POSIX scheduler implementation header
8325 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8327 # No user value, uncomment the following line to provide one.
8329 # value_source default
8330 # Default value: 0 0
8336 cdl_component CYGPKG_ISO_SEMAPHORES {
8337 # There is no associated value.
8341 # POSIX semaphore implementations
8343 cdl_interface CYGINT_ISO_SEMAPHORES {
8344 # No options implement this inferface
8345 # This value cannot be modified here.
8348 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8349 # CYGINT_ISO_SEMAPHORES == 0
8352 # The following properties are affected by this value
8353 # interface CYGINT_ISO_SEMAPHORES
8354 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8357 # POSIX semaphore implementation header
8359 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8361 # No user value, uncomment the following line to provide one.
8363 # value_source default
8364 # Default value: 0 0
8368 # POSIX message queues
8370 cdl_component CYGPKG_ISO_MQUEUE {
8371 # There is no associated value.
8377 cdl_interface CYGINT_ISO_MQUEUE {
8378 # No options implement this inferface
8379 # This value cannot be modified here.
8382 # Requires: 1 >= CYGINT_ISO_MQUEUE
8383 # CYGINT_ISO_MQUEUE == 0
8386 # The following properties are affected by this value
8387 # interface CYGINT_ISO_MQUEUE
8388 # Requires: 1 >= CYGINT_ISO_MQUEUE
8389 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8390 # ActiveIf: CYGINT_ISO_MQUEUE
8391 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8392 # ActiveIf: CYGINT_ISO_MQUEUE
8395 # Implementation header
8397 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8399 # No user value, uncomment the following line to provide one.
8401 # value_source default
8402 # Default value: 0 0
8405 # Maximum number of open message queues
8407 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8408 # This option is not active
8409 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8410 # CYGINT_ISO_MQUEUE == 0
8414 # No user value, uncomment the following line to provide one.
8416 # value_source default
8417 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8418 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8419 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8423 # Maximum number of message priorities
8425 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8426 # This option is not active
8427 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8428 # CYGINT_ISO_MQUEUE == 0
8432 # No user value, uncomment the following line to provide one.
8433 # user_value 1 65535
8434 # value_source default
8435 # Default value: 1 65535
8441 cdl_component CYGPKG_ISO_PTHREAD {
8442 # There is no associated value.
8446 # POSIX pthread implementations
8448 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8449 # No options implement this inferface
8450 # This value cannot be modified here.
8452 # Current value: 0 0
8453 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8454 # CYGINT_ISO_PTHREAD_IMPL == 0
8457 # The following properties are affected by this value
8458 # interface CYGINT_ISO_PTHREAD_IMPL
8459 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8462 # POSIX pthread implementation header
8464 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8466 # No user value, uncomment the following line to provide one.
8468 # value_source default
8469 # Default value: 0 0
8472 # POSIX mutex/cond var implementations
8474 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8475 # No options implement this inferface
8476 # This value cannot be modified here.
8478 # Current value: 0 0
8479 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8480 # CYGINT_ISO_PTHREAD_MUTEX == 0
8483 # The following properties are affected by this value
8484 # interface CYGINT_ISO_PTHREAD_MUTEX
8485 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8488 # POSIX mutex/cond var implementation header
8490 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8492 # No user value, uncomment the following line to provide one.
8494 # value_source default
8495 # Default value: 0 0
8501 cdl_component CYGPKG_ISO_LIMITS {
8502 # There is no associated value.
8506 # POSIX pthread limits implementations
8508 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8509 # No options implement this inferface
8510 # This value cannot be modified here.
8513 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8514 # CYGINT_ISO_POSIX_LIMITS == 0
8517 # The following properties are affected by this value
8518 # interface CYGINT_ISO_POSIX_LIMITS
8519 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8522 # POSIX pthread limits implementation header
8524 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8526 # No user value, uncomment the following line to provide one.
8528 # value_source default
8529 # Default value: 0 0
8532 # OPEN_MAX implementation header
8534 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8536 # No user value, uncomment the following line to provide one.
8538 # value_source default
8539 # Default value: 0 0
8542 # LINK_MAX implementation header
8544 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8546 # No user value, uncomment the following line to provide one.
8548 # value_source default
8549 # Default value: 0 0
8552 # NAME_MAX implementation header
8554 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8556 # No user value, uncomment the following line to provide one.
8558 # value_source default
8559 # Default value: 0 0
8562 # PATH_MAX implementation header
8564 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8566 # No user value, uncomment the following line to provide one.
8568 # value_source default
8569 # Default value: 0 0
8575 cdl_component CYGPKG_ISO_TERMIOS {
8576 # There is no associated value.
8580 # POSIX termios implementations
8582 cdl_interface CYGINT_ISO_TERMIOS {
8583 # No options implement this inferface
8584 # This value cannot be modified here.
8587 # Requires: 1 >= CYGINT_ISO_TERMIOS
8588 # CYGINT_ISO_TERMIOS == 0
8591 # The following properties are affected by this value
8592 # interface CYGINT_ISO_TERMIOS
8593 # Requires: 1 >= CYGINT_ISO_TERMIOS
8596 # POSIX termios implementation header
8598 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8600 # No user value, uncomment the following line to provide one.
8602 # value_source default
8603 # Default value: 0 0
8609 cdl_component CYGPKG_ISO_DLFCN {
8610 # There is no associated value.
8614 # Dynamic load implementations
8616 cdl_interface CYGINT_ISO_DLFCN {
8617 # No options implement this inferface
8618 # This value cannot be modified here.
8621 # Requires: 1 >= CYGINT_ISO_DLFCN
8622 # CYGINT_ISO_DLFCN == 0
8625 # The following properties are affected by this value
8626 # interface CYGINT_ISO_DLFCN
8627 # Requires: 1 >= CYGINT_ISO_DLFCN
8630 # Dynamic load implementation header
8632 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8634 # No user value, uncomment the following line to provide one.
8636 # value_source default
8637 # Default value: 0 0
8641 # UNIX standard functions
8643 cdl_component CYGPKG_ISO_UNISTD {
8644 # There is no associated value.
8648 # POSIX timer operations implementations
8650 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8651 # No options implement this inferface
8652 # This value cannot be modified here.
8654 # Current value: 0 0
8655 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8656 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8659 # The following properties are affected by this value
8660 # interface CYGINT_ISO_POSIX_TIMER_OPS
8661 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8664 # POSIX timer operations implementation header
8666 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8668 # No user value, uncomment the following line to provide one.
8670 # value_source default
8671 # Default value: 0 0
8674 # POSIX sleep() implementations
8676 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8677 # No options implement this inferface
8678 # This value cannot be modified here.
8680 # Current value: 0 0
8681 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8682 # CYGINT_ISO_POSIX_SLEEP == 0
8685 # The following properties are affected by this value
8686 # interface CYGINT_ISO_POSIX_SLEEP
8687 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8690 # POSIX sleep() implementation header
8692 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8694 # No user value, uncomment the following line to provide one.
8696 # value_source default
8697 # Default value: 0 0
8701 # select()/poll() functions
8703 cdl_component CYGPKG_ISO_SELECT {
8704 # There is no associated value.
8708 # select() implementations
8710 cdl_interface CYGINT_ISO_SELECT {
8711 # No options implement this inferface
8712 # This value cannot be modified here.
8714 # Current value: 0 0
8715 # Requires: 1 >= CYGINT_ISO_SELECT
8716 # CYGINT_ISO_SELECT == 0
8719 # The following properties are affected by this value
8720 # interface CYGINT_ISO_SELECT
8721 # Requires: 1 >= CYGINT_ISO_SELECT
8724 # select() implementation header
8726 cdl_option CYGBLD_ISO_SELECT_HEADER {
8728 # No user value, uncomment the following line to provide one.
8730 # value_source default
8731 # Default value: 0 0
8734 # poll() implementations
8736 cdl_interface CYGINT_ISO_POLL {
8737 # No options implement this inferface
8738 # This value cannot be modified here.
8740 # Current value: 0 0
8741 # Requires: 1 >= CYGINT_ISO_POLL
8742 # CYGINT_ISO_POLL == 0
8745 # The following properties are affected by this value
8746 # interface CYGINT_ISO_POLL
8747 # Requires: 1 >= CYGINT_ISO_POLL
8750 # poll() implementation header
8752 cdl_option CYGBLD_ISO_POLL_HEADER {
8754 # No user value, uncomment the following line to provide one.
8756 # value_source default
8757 # Default value: 0 0
8761 # NetDB utility functions
8763 cdl_component CYGPKG_ISO_NETDB {
8764 # There is no associated value.
8768 # DNS implementations
8770 cdl_interface CYGINT_ISO_DNS {
8771 # No options implement this inferface
8772 # This value cannot be modified here.
8775 # Requires: 1 >= CYGINT_ISO_DNS
8776 # CYGINT_ISO_DNS == 0
8779 # The following properties are affected by this value
8780 # interface CYGINT_ISO_DNS
8781 # Requires: 1 >= CYGINT_ISO_DNS
8784 # DNS implementation header
8786 cdl_option CYGBLD_ISO_DNS_HEADER {
8788 # No user value, uncomment the following line to provide one.
8790 # value_source default
8791 # Default value: 0 0
8794 # Protocol network database implementations
8796 cdl_interface CYGINT_ISO_NETDB_PROTO {
8797 # No options implement this inferface
8798 # This value cannot be modified here.
8801 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8802 # CYGINT_ISO_NETDB_PROTO == 0
8805 # The following properties are affected by this value
8806 # interface CYGINT_ISO_NETDB_PROTO
8807 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8810 # Protocol network database implementation header
8812 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8814 # No user value, uncomment the following line to provide one.
8816 # value_source default
8817 # Default value: 0 0
8820 # Services network database implementations
8822 cdl_interface CYGINT_ISO_NETDB_SERV {
8823 # No options implement this inferface
8824 # This value cannot be modified here.
8827 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8828 # CYGINT_ISO_NETDB_SERV == 0
8831 # The following properties are affected by this value
8832 # interface CYGINT_ISO_NETDB_SERV
8833 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8836 # Services network database implementation header
8838 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8840 # No user value, uncomment the following line to provide one.
8842 # value_source default
8843 # Default value: 0 0
8848 # Package specific build options including control over
8849 # compiler flags used only in building this package,
8850 # and details of which tests are built.
8852 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8853 # There is no associated value.
8857 # Additional compiler flags
8858 # This option modifies the set of compiler flags for
8859 # building the ISO C and POSIX infrastructure package.
8860 # These flags are used in addition to the set of global flags.
8862 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8864 # No user value, uncomment the following line to provide one.
8866 # value_source default
8870 # Suppressed compiler flags
8871 # This option modifies the set of compiler flags for
8872 # building the ISO C and POSIX infrastructure package.
8873 # These flags are removed from the set of global flags
8876 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8878 # No user value, uncomment the following line to provide one.
8880 # value_source default
8887 # doc: ref/services-crc.html
8888 # This package provides support for CRC calculation. Currently
8889 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8890 # Gary S. Brown, and a 16 bit CRC.
8892 cdl_package CYGPKG_CRC {
8893 # Packages cannot be added or removed, nor can their version be changed,
8894 # simply by editing their value. Instead the appropriate configuration
8895 # should be used to perform these actions.
8897 # This value cannot be modified here.
8899 # Current value: 1 current
8901 # The following properties are affected by this value
8902 # package CYGPKG_COMPRESS_ZLIB
8903 # Requires: CYGPKG_CRC
8909 cdl_option CYGPKG_CRC_TESTS {
8910 # Calculated value: "tests/crc_test"
8912 # Current_value: tests/crc_test
8916 # Zlib compress and decompress package
8917 # This package provides support for compression and
8920 cdl_package CYGPKG_COMPRESS_ZLIB {
8921 # Packages cannot be added or removed, nor can their version be changed,
8922 # simply by editing their value. Instead the appropriate configuration
8923 # should be used to perform these actions.
8925 # This value cannot be modified here.
8927 # Current value: 1 current
8928 # Requires: CYGPKG_ISOINFRA
8929 # CYGPKG_ISOINFRA == current
8931 # Requires: CYGPKG_CRC
8932 # CYGPKG_CRC == current
8935 # The following properties are affected by this value
8936 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8937 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8941 # Override memory allocation routines.
8943 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8944 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8945 # This value cannot be modified here.
8949 # The following properties are affected by this value
8950 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8951 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8954 # Should deflate() produce 'gzip' compatible output?
8955 # If this option is set then the output of calling deflate()
8956 # will be wrapped up as a 'gzip' compatible file.
8958 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8960 # No user value, uncomment the following line to provide one.
8962 # value_source default
8966 # Does this library need malloc?
8967 # This pseudo-option will force the memalloc library to be
8968 # required iff the application does not provide it's own
8971 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8972 # This option is not active
8973 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8974 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8978 # No user value, uncomment the following line to provide one.
8980 # value_source default
8982 # Requires: CYGPKG_MEMALLOC
8983 # CYGPKG_MEMALLOC == current
8987 # Include stdio-like utility functions
8988 # This option enables the stdio-like zlib utility functions
8989 # (gzread/gzwrite and friends) provided in gzio.c.
8991 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8993 # No user value, uncomment the following line to provide one.
8995 # value_source default
8996 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8997 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8999 # Requires: CYGINT_ISO_STDIO_FILEPOS
9000 # CYGINT_ISO_STDIO_FILEPOS == 0
9002 # Requires: CYGINT_ISO_STRING_STRFUNCS
9003 # CYGINT_ISO_STRING_STRFUNCS == 1
9005 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9006 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9008 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9009 # CYGINT_ISO_STDIO_FILEACCESS == 0
9013 # Zlib compress and decompress package build options
9014 # Package specific build options including control over
9015 # compiler flags used only in building this package,
9016 # and details of which tests are built.
9018 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9019 # There is no associated value.
9023 # Additional compiler flags
9024 # This option modifies the set of compiler flags for
9025 # building this package. These flags are used in addition
9026 # to the set of global flags.
9028 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9030 # No user value, uncomment the following line to provide one.
9031 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9032 # value_source default
9033 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9036 # Suppressed compiler flags
9037 # This option modifies the set of compiler flags for
9038 # building this package. These flags are removed from
9039 # the set of global flags if present.
9041 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9043 # No user value, uncomment the following line to provide one.
9044 # user_value -Wstrict-prototypes
9045 # value_source default
9046 # Default value: -Wstrict-prototypes
9049 # Additional compiler flags
9050 # This option modifies the set of compiler flags for
9051 # building this package. These flags are used in addition
9052 # to the set of global flags.
9054 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9056 # No user value, uncomment the following line to provide one.
9058 # value_source default
9062 # Suppressed compiler flags
9063 # This option modifies the set of compiler flags for
9064 # building this package. These flags are removed from
9065 # the set of global flags if present.
9067 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9069 # No user value, uncomment the following line to provide one.
9071 # value_source default
9078 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9079 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9081 # Current_value: tests/zlib1.c tests/zlib2.c
9085 # FLASH device drivers
9086 # doc: ref/flash.html
9087 # This option enables drivers for basic I/O services on
9090 cdl_package CYGPKG_IO_FLASH {
9091 # Packages cannot be added or removed, nor can their version be changed,
9092 # simply by editing their value. Instead the appropriate configuration
9093 # should be used to perform these actions.
9095 # This value cannot be modified here.
9097 # Current value: 1 current
9098 # Requires: CYGPKG_ISOINFRA
9099 # CYGPKG_ISOINFRA == current
9101 # Requires: CYGINT_ISO_STRING_STRFUNCS
9102 # CYGINT_ISO_STRING_STRFUNCS == 1
9105 # The following properties are affected by this value
9106 # component CYGSEM_REDBOOT_FLASH_CONFIG
9107 # DefaultValue: CYGPKG_IO_FLASH != 0
9108 # package CYGPKG_DEVS_FLASH_ONMXC
9109 # ActiveIf: CYGPKG_IO_FLASH
9113 # Hardware FLASH device drivers
9114 # This option enables the hardware device drivers
9115 # for the current platform.
9117 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9118 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9119 # This value cannot be modified here.
9123 # The following properties are affected by this value
9124 # component CYGPKG_REDBOOT_FLASH
9125 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9128 # Hardware FLASH device drivers are not in RAM
9129 # Use of this interface is deprecated.
9130 # Drivers should make sure that the functions are
9131 # linked to RAM by putting them in .2ram sections.
9133 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9134 # No options implement this inferface
9135 # This value cannot be modified here.
9137 # Current value: 0 0
9138 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9139 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9142 # The following properties are affected by this value
9143 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9144 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9147 # Hardware can support block locking
9148 # This option will be enabled by devices which can support
9149 # locking (write-protection) of individual blocks.
9151 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9152 # No options implement this inferface
9153 # This value cannot be modified here.
9155 # Current value: 0 0
9157 # The following properties are affected by this value
9158 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9159 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9162 # Hardware cannot support direct access to FLASH memory
9163 # This option will be asserted by devices which cannot support
9164 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9165 # devices). In these cases, the driver must provide an appropriate
9166 # hardware access function.
9168 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9170 # No user value, uncomment the following line to provide one.
9172 # The inferred value should not be edited directly.
9174 # value_source inferred
9176 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9177 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9180 # The following properties are affected by this value
9181 # option CYGPRI_REDBOOT_ZLIB_FLASH
9182 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9183 # component CYGHWR_DEVS_FLASH_MMC
9184 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9185 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9186 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9187 # option CYGHWR_DEVS_FLASH_MMC_SD
9188 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9189 # option CYGHWR_DEVS_FLASH_MXC_NAND
9190 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9193 # Display status messages during flash operations
9194 # Selecting this option will cause the drivers to print status
9195 # messages as various flash operations are undertaken.
9197 cdl_option CYGSEM_IO_FLASH_CHATTER {
9199 # No user value, uncomment the following line to provide one.
9201 # value_source default
9205 # Verify data programmed to flash
9206 # Selecting this option will cause verification of data
9207 # programmed to flash.
9209 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9211 # No user value, uncomment the following line to provide one.
9213 # The inferred value should not be edited directly.
9215 # value_source inferred
9218 # The following properties are affected by this value
9219 # option CYGSEM_IO_FLASH_READ_INDIRECT
9220 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9223 # Platform has flash soft DIP switch write-protect
9224 # Selecting this option will cause the state of a hardware jumper or
9225 # dipswitch to be read by software to determine whether the flash is
9226 # write-protected or not.
9228 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9230 # No user value, uncomment the following line to provide one.
9232 # value_source default
9236 # Instantiate in I/O block device API
9237 # Provides a block device accessible using the standard I/O
9238 # API ( cyg_io_read() etc. )
9240 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9241 # This option is not active
9242 # ActiveIf constraint: CYGPKG_IO
9243 # CYGPKG_IO (unknown) == 0
9247 # No user value, uncomment the following line to provide one.
9249 # value_source default
9254 # Name of flash device 1 block device
9256 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9257 # This option is not active
9258 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9259 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9262 # No user value, uncomment the following line to provide one.
9263 # user_value "\"/dev/flash1\""
9264 # value_source default
9265 # Default value: "\"/dev/flash1\""
9270 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9271 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9272 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9273 # This option is not active
9274 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9276 # This value cannot be modified here.
9279 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9280 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9283 # The following properties are affected by this value
9284 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9285 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9288 # Static configuration
9289 # This configures the flash device 1 block device
9290 # with static base and length
9292 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9293 # This option is not active
9294 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9297 # No user value, uncomment the following line to provide one.
9299 # value_source default
9304 # Start offset from flash base
9305 # This gives the offset from the base of flash which this
9306 # block device corresponds to.
9308 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9309 # This option is not active
9310 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9313 # No user value, uncomment the following line to provide one.
9314 # user_value 0x00100000
9315 # value_source default
9316 # Default value: 0x00100000
9320 # This gives the length of the region of flash given over
9321 # to this block device.
9323 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9324 # This option is not active
9325 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9328 # No user value, uncomment the following line to provide one.
9329 # user_value 0x00100000
9330 # value_source default
9331 # Default value: 0x00100000
9335 # Configuration from FIS
9336 # This configures the flash device 1 block device
9339 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9340 # This option is not active
9341 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9344 # No user value, uncomment the following line to provide one.
9346 # value_source default
9353 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9354 # This option is not active
9355 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9356 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9359 # No user value, uncomment the following line to provide one.
9360 # user_value "\"jffs2\""
9361 # value_source default
9362 # Default value: "\"jffs2\""
9368 # Flash device driver build options
9369 # Package specific build options including control over
9370 # compiler flags used only in building this package,
9371 # and details of which tests are built.
9373 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9374 # There is no associated value.
9378 # Additional compiler flags
9379 # This option modifies the set of compiler flags for
9380 # building the flash device drivers. These flags are used in addition
9381 # to the set of global flags.
9383 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9385 # No user value, uncomment the following line to provide one.
9387 # value_source default
9391 # Suppressed compiler flags
9392 # This option modifies the set of compiler flags for
9393 # building the flash device drivers. These flags are removed from
9394 # the set of global flags if present.
9396 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9398 # No user value, uncomment the following line to provide one.
9400 # value_source default
9404 # Flash device driver tests
9405 # This option specifies the set of tests for the flash device drivers.
9407 cdl_component CYGPKG_IO_FLASH_TESTS {
9408 # Calculated value: "tests/flash1"
9410 # Current_value: tests/flash1
9414 # Start offset from flash base
9415 # This gives the offset from the base of flash where tests
9416 # can be run. It is important to set this correctly, as an
9417 # incorrect value could allow the tests to write over critical
9418 # portions of the FLASH device and possibly render the target
9419 # board totally non-functional.
9421 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9423 # No user value, uncomment the following line to provide one.
9424 # user_value 0x00100000
9425 # value_source default
9426 # Default value: 0x00100000
9430 # This gives the length of the region of flash used for testing.
9432 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9434 # No user value, uncomment the following line to provide one.
9435 # user_value 0x00100000
9436 # value_source default
9437 # Default value: 0x00100000
9442 # Support FLASH memory on Freescale MXC platforms
9444 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9445 # Packages cannot be added or removed, nor can their version be changed,
9446 # simply by editing their value. Instead the appropriate configuration
9447 # should be used to perform these actions.
9449 # ActiveIf constraint: CYGPKG_IO_FLASH
9450 # CYGPKG_IO_FLASH == current
9453 # This value cannot be modified here.
9455 # Current value: 1 current
9459 # MXC platform MMC card support
9460 # When this option is enabled, it indicates MMC card is
9461 # supported on the MXC platforms
9463 cdl_component CYGHWR_DEVS_FLASH_MMC {
9465 # No user value, uncomment the following line to provide one.
9467 # value_source default
9469 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9470 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9473 # The following properties are affected by this value
9474 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9475 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9476 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9477 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9478 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9479 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9480 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9481 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9485 # MXC platform MMC card for newer SDHC controllers
9487 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9488 # This option is not active
9489 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9490 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9491 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9492 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9493 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9494 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9495 # CYGPKG_HAL_ARM_MX51 == current
9496 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
9500 # No user value, uncomment the following line to provide one.
9502 # value_source default
9504 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9505 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9509 # MXC platform MMC card for older MMC/SD controllers
9511 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9512 # This option is not active
9513 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9514 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9515 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9516 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9520 # No user value, uncomment the following line to provide one.
9522 # value_source default
9524 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9525 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9530 # MXC platform NOR flash memory support
9531 # When this option is enabled, it indicates NOR flash is
9532 # supported on the MXC platforms
9534 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9536 # No user value, uncomment the following line to provide one.
9538 # The inferred value should not be edited directly.
9540 # value_source inferred
9543 # The following properties are affected by this value
9544 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9545 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9546 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9547 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9548 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9549 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9550 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9551 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9552 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9553 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9556 # MXC platform NAND flash memory support
9557 # When this option is enabled, it indicates NAND flash is
9558 # supported on the MXC platforms
9560 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9562 # No user value, uncomment the following line to provide one.
9564 # The inferred value should not be edited directly.
9566 # value_source inferred
9568 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9569 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9572 # The following properties are affected by this value
9573 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9574 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9575 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9576 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9577 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9578 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9579 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9580 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9581 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9582 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9583 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9584 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9587 # i.MX platform SPI NOR flash memory support
9588 # When this option is enabled, it indicates SPI NOR flash is
9589 # supported on the i.MX platforms
9591 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9593 # No user value, uncomment the following line to provide one.
9595 # value_source default
9597 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9598 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9602 # MXC platform ATA support
9603 # When this option is enabled, it indicates ATA is
9604 # supported on the MXC platforms
9606 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9608 # No user value, uncomment the following line to provide one.
9610 # value_source default
9614 # Use a flash based Bad Block Table
9616 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9617 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9618 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9621 # There is no associated value.
9625 # When this option is enabled, the driver will search for a flash
9626 # based bad block table
9628 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9630 # No user value, uncomment the following line to provide one.
9632 # value_source default
9636 # header file defining the NAND BBT descriptor
9637 # defines the name of the header file that describes the BBT layout
9639 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9641 # No user value, uncomment the following line to provide one.
9643 # The inferred value should not be edited directly.
9644 inferred_value 1 <cyg/io/tx51_nand_bbt.h>
9645 # value_source inferred
9646 # Default value: 0 0
9649 # Number of blocks to reserve for BBT
9650 # Number of blocks to reserve for BBT
9652 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9654 # No user value, uncomment the following line to provide one.
9656 # value_source default
9661 # MXC platform multi flash memory support
9662 # When this option is enabled, it indicates multi flashes are
9663 # supported on the MXC platforms (like NAND and NOR)
9665 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9666 # This option is not active
9667 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9668 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9669 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9670 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9671 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9672 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9673 # CYGHWR_DEVS_FLASH_MMC == 0
9674 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9675 # CYGHWR_DEVS_FLASH_MMC == 0
9679 # No user value, uncomment the following line to provide one.
9681 # The inferred value should not be edited directly.
9683 # value_source inferred
9687 # MXC platform NAND flash reset workaround support
9688 # When this option is enabled, it indicates 0xFFFF is used for
9689 # the NAND reset command instead of 0xFF.
9691 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9692 # No options implement this inferface
9693 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9694 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9697 # This value cannot be modified here.
9704 # Dynamic memory allocation
9705 # doc: ref/memalloc.html
9706 # This package provides memory allocator infrastructure required for
9707 # dynamic memory allocators, including the ISO standard malloc
9708 # interface. It also contains some sample implementations.
9710 cdl_package CYGPKG_MEMALLOC {
9711 # Packages cannot be added or removed, nor can their version be changed,
9712 # simply by editing their value. Instead the appropriate configuration
9713 # should be used to perform these actions.
9715 # This value cannot be modified here.
9717 # Current value: 1 current
9719 # The following properties are affected by this value
9720 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9721 # Requires: CYGPKG_MEMALLOC
9725 # Memory allocator implementations
9726 # This component contains configuration options related to the
9727 # various memory allocators available.
9729 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9730 # There is no associated value.
9734 # Fixed block allocator
9735 # This component contains configuration options related to the
9736 # fixed block memory allocator.
9738 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9739 # There is no associated value.
9744 # With this option enabled, this allocator will be
9745 # made thread-safe. Additionally allocation functions
9746 # are made available that allow a thread to wait
9747 # until memory is available.
9749 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9750 # This option is not active
9751 # ActiveIf constraint: CYGPKG_KERNEL
9752 # CYGPKG_KERNEL (unknown) == 0
9756 # No user value, uncomment the following line to provide one.
9758 # value_source default
9763 # Simple variable block allocator
9764 # This component contains configuration options related to the
9765 # simple variable block memory allocator. This allocator is not
9766 # very fast, and in particular does not scale well with large
9767 # numbers of allocations. It is however very compact in terms of
9768 # code size and does not have very much overhead per allocation.
9770 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9771 # There is no associated value.
9776 # With this option enabled, this allocator will be
9777 # made thread-safe. Additionally allocation functions
9778 # are added that allow a thread to wait until memory
9779 # are made available that allow a thread to wait
9780 # until memory is available.
9782 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9783 # This option is not active
9784 # ActiveIf constraint: CYGPKG_KERNEL
9785 # CYGPKG_KERNEL (unknown) == 0
9789 # No user value, uncomment the following line to provide one.
9791 # value_source default
9796 # The variable-block memory allocator can perform coalescing
9797 # of memory whenever the application code releases memory back
9798 # to the pool. This coalescing reduces the possibility of
9799 # memory fragmentation problems, but involves extra code and
9802 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9804 # No user value, uncomment the following line to provide one.
9806 # value_source default
9809 # The following properties are affected by this value
9810 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9811 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9816 # This component contains configuration options related to the
9817 # port of Doug Lea's memory allocator, normally known as
9818 # dlmalloc. dlmalloc has a reputation for being both fast
9819 # and space-conserving, as well as resisting fragmentation well.
9820 # It is a common choice for a general purpose allocator and
9821 # has been used in both newlib and Linux glibc.
9823 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9824 # There is no associated value.
9829 # Doug Lea's malloc implementation has substantial amounts
9830 # of internal checking in order to verify the operation
9831 # and consistency of the allocator. However this imposes
9832 # substantial overhead on each operation. Therefore this
9833 # checking may be individually disabled.
9835 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9837 # No user value, uncomment the following line to provide one.
9839 # value_source default
9840 # Default value: 0 != CYGDBG_USE_ASSERTS
9841 # CYGDBG_USE_ASSERTS == 0
9843 # Requires: CYGDBG_USE_ASSERTS
9844 # CYGDBG_USE_ASSERTS == 0
9849 # With this option enabled, this allocator will be
9850 # made thread-safe. Additionally allocation functions
9851 # are made available that allow a thread to wait
9852 # until memory is available.
9854 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9855 # This option is not active
9856 # ActiveIf constraint: CYGPKG_KERNEL
9857 # CYGPKG_KERNEL (unknown) == 0
9861 # No user value, uncomment the following line to provide one.
9863 # value_source default
9865 # Requires: CYGPKG_KERNEL
9866 # CYGPKG_KERNEL (unknown) == 0
9870 # Support more than one instance
9871 # Having this option disabled allows important
9872 # implementation structures to be declared as a single
9873 # static instance, allowing faster access. However this
9874 # would fail if there is more than one instance of
9875 # the dlmalloc allocator class. Therefore this option can
9876 # be enabled if multiple instances are required. Note: as
9877 # a special case, if this allocator is used as the
9878 # implementation of malloc, and it can be determined there
9879 # is more than one malloc pool, then this option will be
9882 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9884 # No user value, uncomment the following line to provide one.
9886 # value_source default
9890 # Use system memmove() and memset()
9891 # This may be used to control whether memset() and memmove()
9892 # are used within the implementation. The alternative is
9893 # to use some macro equivalents, which some people report
9894 # are faster in some circumstances.
9896 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9898 # No user value, uncomment the following line to provide one.
9900 # value_source default
9901 # Default value: 0 != CYGPKG_ISOINFRA
9902 # CYGPKG_ISOINFRA == current
9904 # Requires: CYGPKG_ISOINFRA
9905 # CYGPKG_ISOINFRA == current
9909 # Minimum alignment of allocated blocks
9910 # This option controls the minimum alignment that the
9911 # allocated memory blocks are aligned on, specified as
9912 # 2^N. Note that using large mininum alignments can lead
9913 # to excessive memory wastage.
9915 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9917 # No user value, uncomment the following line to provide one.
9919 # value_source default
9921 # Legal values: 3 to 10
9925 # Variable block allocator with separate metadata
9926 # This component contains configuration options related to the
9927 # variable block memory allocator with separate metadata.
9929 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9930 # There is no associated value.
9935 # With this option enabled, this allocator will be
9936 # made thread-safe. Additionally allocation functions
9937 # are made available that allow a thread to wait
9938 # until memory is available.
9940 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9941 # This option is not active
9942 # ActiveIf constraint: CYGPKG_KERNEL
9943 # CYGPKG_KERNEL (unknown) == 0
9947 # No user value, uncomment the following line to provide one.
9949 # value_source default
9955 # Kernel C API support for memory allocation
9956 # This option must be enabled to provide the extensions required
9957 # to support integration into the kernel C API.
9959 cdl_option CYGFUN_MEMALLOC_KAPI {
9960 # This option is not active
9961 # ActiveIf constraint: CYGPKG_KERNEL
9962 # CYGPKG_KERNEL (unknown) == 0
9966 # No user value, uncomment the following line to provide one.
9968 # value_source default
9969 # Default value: CYGFUN_KERNEL_API_C
9970 # CYGFUN_KERNEL_API_C (unknown) == 0
9974 # malloc(0) returns NULL
9975 # This option controls the behavior of malloc(0) ( or calloc with
9976 # either argument 0 ). It is permitted by the standard to return
9977 # either a NULL pointer or a unique pointer. Enabling this option
9978 # forces a NULL pointer to be returned.
9980 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9982 # No user value, uncomment the following line to provide one.
9984 # value_source default
9988 # Breakpoint site when running out of memory
9989 # Whenever the system runs out of memory, it invokes this function
9990 # before either going to sleep waiting for memory to become
9991 # available or returning failure.
9993 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9995 # No user value, uncomment the following line to provide one.
9997 # value_source default
10001 # malloc() and supporting allocators
10002 # This component enables support for dynamic memory
10003 # allocation as supplied by the functions malloc(),
10004 # free(), calloc() and realloc(). As these
10005 # functions are often used, but can have quite an
10006 # overhead, disabling them here can ensure they
10007 # cannot even be used accidentally when static
10008 # allocation is preferred. Within this component are
10009 # various allocators that can be selected for use
10010 # as the underlying implementation of the dynamic
10011 # allocation functions.
10013 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10014 # ActiveIf constraint: CYGPKG_ISOINFRA
10015 # CYGPKG_ISOINFRA == current
10019 # No user value, uncomment the following line to provide one.
10021 # value_source default
10026 # Use external heap definition
10027 # This option allows other components in the
10028 # system to override the default system
10029 # provision of heap memory pools. This should
10030 # be set to a header which provides the equivalent
10031 # definitions to <pkgconf/heaps.hxx>.
10033 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10035 # No user value, uncomment the following line to provide one.
10037 # value_source default
10038 # Default value: 0 0
10041 # Use external implementation of joining multiple heaps
10042 # The default implementation of joining multiple heaps
10043 # is fine for the case where there are multiple disjoint
10044 # memory regions of the same type. However, in a system
10045 # there might be e.g. a small amount of internal SRAM and
10046 # a large amount of external DRAM. The SRAM is faster and
10047 # the DRAM is slower. An application can implement some
10048 # heuristic to choose which pool to allocate from. This
10049 # heuristic can be highly application specific.
10051 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10053 # No user value, uncomment the following line to provide one.
10055 # value_source default
10056 # Default value: 0 0
10059 # malloc() allocator implementations
10061 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10062 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10063 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10064 # This value cannot be modified here.
10067 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10068 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10071 # The following properties are affected by this value
10072 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10073 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10076 # malloc() implementation instantiation data
10077 # Memory allocator implementations that are capable of being
10078 # used underneath malloc() must be instantiated. The code
10079 # to do this is set in this option. It is only intended to
10080 # be set by the implementation, not the user.
10082 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10084 # No user value, uncomment the following line to provide one.
10085 # user_value <cyg/memalloc/dlmalloc.hxx>
10086 # value_source default
10087 # Default value: <cyg/memalloc/dlmalloc.hxx>
10089 # The following properties are affected by this value
10090 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10091 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10092 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10093 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10096 # Simple variable block implementation
10097 # This causes malloc() to use the simple
10098 # variable block allocator.
10100 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10102 # No user value, uncomment the following line to provide one.
10104 # value_source default
10106 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10107 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10109 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10110 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10114 # Doug Lea's malloc implementation
10115 # This causes malloc() to use a version of Doug Lea's
10116 # malloc (dlmalloc) as the underlying implementation.
10118 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10120 # No user value, uncomment the following line to provide one.
10122 # value_source default
10124 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10125 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10130 # Size of the fallback dynamic memory pool in bytes
10131 # If *no* heaps are configured in your memory layout,
10132 # dynamic memory allocation by
10133 # malloc() and calloc() must be from a fixed-size,
10134 # contiguous memory pool (note here that it is the
10135 # pool that is of a fixed size, but malloc() is still
10136 # able to allocate variable sized chunks of memory
10137 # from it). This option is the size
10138 # of that pool, in bytes. Note that not all of
10139 # this is available for programs to
10140 # use - some is needed for internal information
10141 # about memory regions, and some may be lost to
10142 # ensure that memory allocation only returns
10143 # memory aligned on word (or double word)
10144 # boundaries - a very common architecture
10147 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10149 # No user value, uncomment the following line to provide one.
10151 # value_source default
10152 # Default value: 16384
10153 # Legal values: 32 to 0x7fffffff
10156 # Common memory allocator package build options
10157 # Package specific build options including control over
10158 # compiler flags used only in building this package,
10159 # and details of which tests are built.
10161 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10162 # There is no associated value.
10166 # Additional compiler flags
10167 # This option modifies the set of compiler flags for
10168 # building this package. These flags are used in addition
10169 # to the set of global flags.
10171 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10173 # No user value, uncomment the following line to provide one.
10174 # user_value "-fno-rtti -Woverloaded-virtual"
10175 # value_source default
10176 # Default value: "-fno-rtti -Woverloaded-virtual"
10179 # Suppressed compiler flags
10180 # This option modifies the set of compiler flags for
10181 # building this package. These flags are removed from
10182 # the set of global flags if present.
10184 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10186 # No user value, uncomment the following line to provide one.
10187 # user_value -Wno-pointer-sign
10188 # value_source default
10189 # Default value: -Wno-pointer-sign
10193 # This option specifies the set of tests for this package.
10195 cdl_option CYGPKG_MEMALLOC_TESTS {
10196 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10198 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10203 # Common error code support
10204 # This package contains the common list of error and
10205 # status codes. It is held centrally to allow
10206 # packages to interchange error codes and status
10207 # codes in a common way, rather than each package
10208 # having its own conventions for error/status
10209 # reporting. The error codes are modelled on the
10210 # POSIX style naming e.g. EINVAL etc. This package
10211 # also provides the standard strerror() function to
10212 # convert error codes to textual representation, as
10213 # well as an implementation of the errno idiom.
10215 cdl_package CYGPKG_ERROR {
10216 # Packages cannot be added or removed, nor can their version be changed,
10217 # simply by editing their value. Instead the appropriate configuration
10218 # should be used to perform these actions.
10220 # This value cannot be modified here.
10222 # Current value: 1 current
10223 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10224 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10230 # This package controls the behaviour of the
10231 # errno variable (or more strictly, expression)
10234 cdl_component CYGPKG_ERROR_ERRNO {
10236 # No user value, uncomment the following line to provide one.
10238 # value_source default
10240 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10241 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10247 # This option controls whether the standard error
10248 # code reporting variable errno is a per-thread
10249 # variable, rather than global.
10251 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10253 # No user value, uncomment the following line to provide one.
10255 # The inferred value should not be edited directly.
10257 # value_source inferred
10259 # Requires: CYGVAR_KERNEL_THREADS_DATA
10260 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10265 # Trace verbosity level for debugging the errno
10266 # retrieval mechanism in errno.cxx. Increase this
10267 # value to get additional trace output.
10269 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10271 # No user value, uncomment the following line to provide one.
10273 # value_source default
10275 # Legal values: 0 to 1
10279 # strerror function
10280 # This package controls the presence and behaviour of the
10281 # strerror() function from <string.h>
10283 cdl_option CYGPKG_ERROR_STRERROR {
10285 # No user value, uncomment the following line to provide one.
10287 # value_source default
10289 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10290 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10294 # Error package build options
10295 # Package specific build options including control over
10296 # compiler flags used only in building this package,
10297 # and details of which tests are built.
10299 cdl_component CYGPKG_ERROR_OPTIONS {
10300 # There is no associated value.
10304 # Additional compiler flags
10305 # This option modifies the set of compiler flags for
10306 # building the error package. These flags are used in addition
10307 # to the set of global flags.
10309 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10311 # No user value, uncomment the following line to provide one.
10313 # value_source default
10314 # Default value: ""
10317 # Suppressed compiler flags
10318 # This option modifies the set of compiler flags for
10319 # building the error package. These flags are removed from
10320 # the set of global flags if present.
10322 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10324 # No user value, uncomment the following line to provide one.
10326 # value_source default
10327 # Default value: ""
10332 # I2C driver for FSL MXC-based platforms
10334 cdl_package CYGPKG_DEVS_MXC_I2C {
10335 # Packages cannot be added or removed, nor can their version be changed,
10336 # simply by editing their value. Instead the appropriate configuration
10337 # should be used to perform these actions.
10339 # This value cannot be modified here.
10341 # Current value: 1 current
10344 # ipu driver for mxc
10346 cdl_package CYGPKG_DEVS_IMX_IPU {
10347 # Packages cannot be added or removed, nor can their version be changed,
10348 # simply by editing their value. Instead the appropriate configuration
10349 # should be used to perform these actions.
10351 # This value cannot be modified here.
10353 # Current value: 1 current
10355 # The following properties are affected by this value
10356 # option CYGHWR_MX51_LCD_LOGO
10357 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10361 # IPU version 3EX support
10362 # When this option is enabled, it indicates the IPU version
10365 cdl_option CYGHWR_DEVS_IPU_3_EX {
10367 # No user value, uncomment the following line to provide one.
10369 # The inferred value should not be edited directly.
10371 # value_source inferred
10375 # IPU version 3D support
10376 # When this option is enabled, it indicates the IPU version
10379 cdl_option CYGHWR_DEVS_IPU_3_D {
10381 # No user value, uncomment the following line to provide one.
10383 # value_source default