1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX53
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX53 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX53 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
803 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
804 # CYGPKG_HAL_ARM_MX53 == current
808 # No user value, uncomment the following line to provide one.
810 # value_source default
815 # Ethernet transceiver (PHY) support
816 # API for ethernet PHY devices
818 cdl_package CYGPKG_DEVS_ETH_PHY {
819 # Packages cannot be added or removed, nor can their version be changed,
820 # simply by editing their value. Instead the appropriate configuration
821 # should be used to perform these actions.
823 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
824 # CYGPKG_IO_ETH_DRIVERS == current
827 # This value cannot be modified here.
829 # Current value: 1 current
830 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
831 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
836 # Enable driver debugging
837 # Enables the diagnostic debug messages on the
840 cdl_option CYGDBG_DEVS_ETH_PHY {
842 # No user value, uncomment the following line to provide one.
844 # value_source default
848 # Time period (seconds) to wait for auto-negotiation
849 # The length of time to wait for auto-negotiation to complete
850 # before giving up and declaring the link dead/missing.
852 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
854 # No user value, uncomment the following line to provide one.
856 # value_source default
861 # Include support for National Semiconductor DP83847 DsPHYTER II
863 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
865 # No user value, uncomment the following line to provide one.
867 # value_source default
872 # Include support for AMD 79C874 NetPHY
874 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
876 # No user value, uncomment the following line to provide one.
878 # value_source default
883 # Include support for Intel LXT972xxx PHY
885 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
887 # No user value, uncomment the following line to provide one.
889 # value_source default
894 # Include support for ICS 1890 PHY
896 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
898 # No user value, uncomment the following line to provide one.
900 # value_source default
905 # Include support for ICS 1892 PHY
907 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
909 # No user value, uncomment the following line to provide one.
911 # value_source default
916 # Include support for ICS 1893 and 1893AF PHY
918 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
920 # No user value, uncomment the following line to provide one.
922 # value_source default
927 # Include support for the Davicom DM9161A PHY
929 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
931 # No user value, uncomment the following line to provide one.
933 # value_source default
938 # Include support for the Micrel KS8721 PHY
940 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
942 # No user value, uncomment the following line to provide one.
944 # value_source default
949 # Include support for SMSC LAN8700 NetPHY
951 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
953 # No user value, uncomment the following line to provide one.
955 # The inferred value should not be edited directly.
957 # value_source inferred
960 # The following properties are affected by this value
961 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
962 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
967 # ISO C library internationalization functions
969 # This package provides internationalization functions specified by the
970 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
971 # functionality and <ctype.h> functionality.
973 cdl_package CYGPKG_LIBC_I18N {
974 # Packages cannot be added or removed, nor can their version be changed,
975 # simply by editing their value. Instead the appropriate configuration
976 # should be used to perform these actions.
978 # This value cannot be modified here.
980 # Current value: 1 current
981 # Requires: CYGPKG_ISOINFRA
982 # CYGPKG_ISOINFRA == current
988 # These options determine which locales other than the "C" locale
989 # are supported and hence contribute to the size of the executable.
991 cdl_component CYGPKG_LIBC_I18N_LOCALES {
992 # There is no associated value.
996 # Support for multiple locales required
998 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1002 # This value cannot be modified here.
1004 # Current value: 0 0
1005 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1006 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1009 # The following properties are affected by this value
1012 # C-SJIS locale support
1013 # This option controls if the "C-SJIS" locale will be
1014 # supported by setlocale(). The locale is a hybrid locale
1015 # that is mostly the "C" locale with Japanese SJIS multibyte
1018 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1020 # No user value, uncomment the following line to provide one.
1022 # value_source default
1025 # The following properties are affected by this value
1026 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1027 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1028 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1029 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1032 # C-JIS locale support
1033 # This option controls if the "C-JIS" locale will be
1034 # supported by setlocale(). The locale is a hybrid locale
1035 # that is mostly the "C" locale with Japanese JIS multibyte
1038 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1040 # No user value, uncomment the following line to provide one.
1042 # value_source default
1045 # The following properties are affected by this value
1046 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1047 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1048 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1049 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1052 # C-EUCJP locale support
1053 # This option controls if the "C-EUCJP" locale will be
1054 # supported by setlocale(). The locale is a hybrid locale
1055 # that is mostly the "C" locale with Japanese EUCJP multibyte
1058 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1060 # No user value, uncomment the following line to provide one.
1062 # value_source default
1065 # The following properties are affected by this value
1066 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1067 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1068 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1069 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1073 # Newlib's ctype implementation
1074 # This option enables the implementation of the ctype functions
1075 # that comes with newlib. It is table driven and therefore
1076 # exhibits different performance characteristics. It also offers
1077 # a limited amount of binary compatibility
1078 # with newlib so that programs linked against newlib ctype/locale
1079 # do not need to be recompiled when linked with eCos.
1081 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1083 # No user value, uncomment the following line to provide one.
1085 # value_source default
1087 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1088 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1092 # Per-thread multibyte state
1093 # This option controls whether the multibyte character
1094 # handling functions mblen(), mbtowc(), and wctomb(),
1095 # have their state recorded on a per-thread
1096 # basis rather than global. If this option is
1097 # disabled, some per-thread space can be saved.
1098 # Enabling this option will use three slots
1099 # of kernel per-thread data. You should ensure you
1100 # have enough slots configured for all your
1103 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1104 # This option is not active
1105 # ActiveIf constraint: CYGPKG_KERNEL
1106 # CYGPKG_KERNEL (unknown) == 0
1110 # No user value, uncomment the following line to provide one.
1112 # value_source default
1113 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1114 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1116 # Requires: CYGVAR_KERNEL_THREADS_DATA
1117 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Size of locale name strings
1122 # This option controls the maximum size of
1123 # locale names and is used, among other things
1124 # to instantiate a static string used
1125 # as a return value from the
1126 # setlocale() function. When requesting the
1127 # current locale settings with LC_ALL, a string
1128 # must be constructed to contain this data, rather
1129 # than just returning a constant string. This
1130 # string data is stored in the static string.
1131 # This depends on the length of locale names,
1132 # hence this option. If just the C locale is
1133 # present, this option can be set as low as 2.
1135 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1137 # No user value, uncomment the following line to provide one.
1139 # value_source default
1140 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1141 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1145 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Inline versions of <ctype.h> functions
1152 # This option chooses whether the simple character
1153 # classification and conversion functions (e.g.
1154 # isupper(), isalpha(), toupper(), etc.)
1155 # from <ctype.h> are available as inline
1156 # functions. This may improve performance and as
1157 # the functions are small, may even improve code
1160 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1166 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1167 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1171 # C library i18n functions build options
1172 # Package specific build options including control over
1173 # compiler flags used only in building this package,
1174 # and details of which tests are built.
1176 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1177 # There is no associated value.
1181 # Additional compiler flags
1182 # This option modifies the set of compiler flags for
1183 # building the C library. These flags are used in addition
1184 # to the set of global flags.
1186 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1188 # No user value, uncomment the following line to provide one.
1189 # user_value "-fno-rtti -Woverloaded-virtual"
1190 # value_source default
1191 # Default value: "-fno-rtti -Woverloaded-virtual"
1194 # Suppressed compiler flags
1195 # This option modifies the set of compiler flags for
1196 # building the C library. These flags are removed from
1197 # the set of global flags if present.
1199 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1201 # No user value, uncomment the following line to provide one.
1202 # user_value -Wno-pointer-sign
1203 # value_source default
1204 # Default value: -Wno-pointer-sign
1207 # C library i18n function tests
1208 # This option specifies the set of tests for the C library
1211 cdl_option CYGPKG_LIBC_I18N_TESTS {
1212 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1214 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1219 # ISO C library general utility functions
1220 # doc: ref/libc.html
1221 # This package provides general utility functions in <stdlib.h>
1222 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1224 cdl_package CYGPKG_LIBC_STDLIB {
1225 # Packages cannot be added or removed, nor can their version be changed,
1226 # simply by editing their value. Instead the appropriate configuration
1227 # should be used to perform these actions.
1229 # This value cannot be modified here.
1231 # Current value: 1 current
1232 # Requires: CYGPKG_ISOINFRA
1233 # CYGPKG_ISOINFRA == current
1235 # Requires: CYGINT_ISO_CTYPE
1236 # CYGINT_ISO_CTYPE == 1
1238 # Requires: CYGINT_ISO_STRING_STRFUNCS
1239 # CYGINT_ISO_STRING_STRFUNCS == 1
1244 # Inline versions of <stdlib.h> functions
1245 # This option chooses whether some of the
1246 # particularly simple standard utility functions
1247 # from <stdlib.h> are available as inline
1248 # functions. This may improve performance, and as
1249 # the functions are small, may even improve code
1252 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1253 # There is no associated value.
1259 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1261 # No user value, uncomment the following line to provide one.
1263 # value_source default
1265 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1266 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1272 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1274 # No user value, uncomment the following line to provide one.
1276 # value_source default
1278 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1279 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1283 # atof() / atoi() / atol()
1285 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1287 # No user value, uncomment the following line to provide one.
1289 # value_source default
1291 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1292 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1297 # Random number generation
1298 # These options control the behaviour of the
1299 # functions rand(), srand() and rand_r()
1301 cdl_component CYGPKG_LIBC_RAND {
1302 # There is no associated value.
1306 # Per-thread random seed
1307 # doc: ref/libc-thread-safety.html
1308 # This option controls whether the pseudo-random
1309 # number generation functions rand() and srand()
1310 # have their state recorded on a per-thread
1311 # basis rather than global. If this option is
1312 # disabled, some per-thread space can be saved.
1313 # Note there is also a POSIX-standard rand_r()
1314 # function to achieve a similar effect with user
1315 # support. Enabling this option will use one slot
1316 # of kernel per-thread data. You should ensure you
1317 # have enough slots configured for all your
1320 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Requires: CYGVAR_KERNEL_THREADS_DATA
1327 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1331 # Random number seed
1332 # This selects the initial random number seed for
1333 # rand()'s pseudo-random number generator. For
1334 # strict ISO standard compliance, this should be 1,
1335 # as per section 7.10.2.2 of the standard.
1337 cdl_option CYGNUM_LIBC_RAND_SEED {
1339 # No user value, uncomment the following line to provide one.
1341 # value_source default
1343 # Legal values: 0 to 0x7fffffff
1347 # Trace verbosity level for debugging the rand(),
1348 # srand() and rand_r() functions. Increase this
1349 # value to get additional trace output.
1351 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1353 # No user value, uncomment the following line to provide one.
1355 # value_source default
1357 # Legal values: 0 to 1
1360 # Simplest implementation
1361 # This provides a very simple implementation of rand()
1362 # that does not perform well with randomness in the
1363 # lower significant bits. However it is exceptionally
1364 # fast. It uses the sample algorithm from the ISO C
1367 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1369 # No user value, uncomment the following line to provide one.
1371 # value_source default
1375 # Simple implementation #1
1376 # This provides a very simple implementation of rand()
1377 # based on the simplest implementation above. However
1378 # it does try to work around the lack of randomness
1379 # in the lower significant bits, at the expense of a
1382 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1389 # Knuth implementation #1
1390 # This implements a slightly more complex algorithm
1391 # published in Donald E. Knuth's Art of Computer
1392 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1393 # This produces better random numbers than the
1394 # simplest approach but is slower.
1396 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1405 # This option allows use of the utility function
1406 # strtod() (and consequently atof()) to convert
1407 # from string to double precision floating point
1408 # numbers. Disabling this option removes the
1409 # dependency on the math library package.
1411 cdl_option CYGFUN_LIBC_strtod {
1413 # No user value, uncomment the following line to provide one.
1415 # value_source default
1416 # Default value: 0 != CYGPKG_LIBM
1417 # CYGPKG_LIBM (unknown) == 0
1419 # Requires: CYGPKG_LIBM
1420 # CYGPKG_LIBM (unknown) == 0
1424 # Provides long long conversion functions
1425 # Enabling this option will provide support for the strtoll(),
1426 # strtoull() and atoll() conversion functions, which are
1427 # the long long variants of the standard versions of these
1428 # functions. Supporting this requires extra code and compile
1431 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1438 # bsearch() tracing level
1439 # Trace verbosity level for debugging the <stdlib.h>
1440 # binary search function bsearch(). Increase this
1441 # value to get additional trace output.
1443 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1445 # No user value, uncomment the following line to provide one.
1447 # value_source default
1449 # Legal values: 0 to 1
1452 # qsort() tracing level
1453 # Trace verbosity level for debugging the <stdlib.h>
1454 # quicksort function qsort(). Increase this value
1455 # to get additional trace output.
1457 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1463 # Legal values: 0 to 1
1466 # C library stdlib build options
1467 # Package specific build options including control over
1468 # compiler flags used only in building this package,
1469 # and details of which tests are built.
1471 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1472 # There is no associated value.
1476 # Additional compiler flags
1477 # This option modifies the set of compiler flags for
1478 # building this package. These flags are used in addition
1479 # to the set of global flags.
1481 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1483 # No user value, uncomment the following line to provide one.
1484 # user_value "-fno-rtti -Woverloaded-virtual"
1485 # value_source default
1486 # Default value: "-fno-rtti -Woverloaded-virtual"
1489 # Suppressed compiler flags
1490 # This option modifies the set of compiler flags for
1491 # building this package. These flags are removed from
1492 # the set of global flags if present.
1494 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1496 # No user value, uncomment the following line to provide one.
1497 # user_value -Wno-pointer-sign
1498 # value_source default
1499 # Default value: -Wno-pointer-sign
1502 # C library stdlib tests
1503 # This option specifies the set of tests for this package.
1505 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1506 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1508 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1515 # doc: ref/the-ecos-hardware-abstraction-layer.html
1516 # The eCos HAL package provide a porting layer for
1517 # higher-level parts of the system such as the kernel and the
1518 # C library. Each installation should have HAL packages for
1519 # one or more architectures, and for each architecture there
1520 # may be one or more supported platforms. It is necessary to
1521 # select one target architecture and one platform for that
1522 # architecture. There are also a number of configuration
1523 # options that are common to all HAL packages.
1525 cdl_package CYGPKG_HAL {
1526 # Packages cannot be added or removed, nor can their version be changed,
1527 # simply by editing their value. Instead the appropriate configuration
1528 # should be used to perform these actions.
1530 # This value cannot be modified here.
1532 # Current value: 1 current
1533 # Requires: CYGPKG_INFRA
1534 # CYGPKG_INFRA == current
1537 # The following properties are affected by this value
1541 # Platform-independent HAL options
1542 # A number of configuration options are common to most or all
1543 # HAL packages, for example options controlling how much state
1544 # should be saved during a context switch. The implementations
1545 # of these options will vary from architecture to architecture.
1547 cdl_component CYGPKG_HAL_COMMON {
1548 # There is no associated value.
1552 # Provide eCos kernel support
1553 # The HAL can be configured to either support the full eCos
1554 # kernel, or to support only very simple applications which do
1555 # not require a full kernel. If kernel support is not required
1556 # then some of the startup, exception, and interrupt handling
1557 # code can be eliminated.
1559 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1561 # No user value, uncomment the following line to provide one.
1563 # value_source default
1564 # Default value: CYGPKG_KERNEL
1565 # CYGPKG_KERNEL (unknown) == 0
1567 # Requires: CYGPKG_KERNEL
1568 # CYGPKG_KERNEL (unknown) == 0
1572 # HAL exception support
1573 # When a processor exception occurs, for example an attempt to
1574 # execute an illegal instruction or to perform a divide by
1575 # zero, this exception may be handled in a number of different
1576 # ways. If the target system has gdb support then typically
1577 # the exception will be handled by gdb code. Otherwise if the
1578 # HAL exception support is enabled then the HAL will invoke a
1579 # routine deliver_exception(). Typically this routine will be
1580 # provided by the eCos kernel, but it is possible for
1581 # application code to provide its own implementation. If the
1582 # HAL exception support is not enabled and a processor
1583 # exception occurs then the behaviour of the system is
1586 cdl_option CYGPKG_HAL_EXCEPTIONS {
1588 # No user value, uncomment the following line to provide one.
1590 # value_source default
1591 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1592 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1594 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1595 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Stop calling constructors early
1600 # This option supports environments where some constructors
1601 # must be run in the context of a thread rather than at
1602 # simple system startup time. A boolean flag named
1603 # cyg_hal_stop_constructors is set to 1 when constructors
1604 # should no longer be invoked. It is up to some other
1605 # package to deal with the rest of the constructors.
1606 # In the current version this is only possible with the
1609 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1611 # No user value, uncomment the following line to provide one.
1613 # value_source default
1615 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1616 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1620 # HAL uses the MMU and allows for CDL manipulation of it's use
1622 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1623 # No options implement this inferface
1624 # This value cannot be modified here.
1628 # The following properties are affected by this value
1629 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1630 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1633 # Install MMU tables.
1634 # This option controls whether this application installs
1635 # its own Memory Management Unit (MMU) tables, or relies on the
1636 # existing environment to run.
1638 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1639 # This option is not active
1640 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1641 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1645 # No user value, uncomment the following line to provide one.
1647 # value_source default
1648 # Default value: CYG_HAL_STARTUP != "RAM"
1649 # CYG_HAL_STARTUP == ROMRAM
1652 # The following properties are affected by this value
1653 # option CYGSEM_HAL_STATIC_MMU_TABLES
1654 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1657 # Use static MMU tables.
1658 # This option defines an environment where any Memory
1659 # Management Unit (MMU) tables are constant. Normally used by ROM
1660 # based environments, this provides a way to save RAM usage which
1661 # would otherwise be required for these tables.
1663 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1665 # No user value, uncomment the following line to provide one.
1667 # value_source default
1669 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1670 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1674 # Route diagnostic output to debug channel
1675 # If not inheriting the console setup from the ROM monitor,
1676 # it is possible to redirect diagnostic output to the debug
1677 # channel by enabling this option. Depending on the debugger
1678 # used it may also be necessary to select a mangler for the
1679 # output to be displayed by the debugger.
1681 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1682 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1683 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1685 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1686 # CYGPKG_HAL_ARM == current
1687 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1688 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1693 # No user value, uncomment the following line to provide one.
1695 # value_source default
1696 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1697 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1698 # CYG_HAL_STARTUP == ROMRAM
1701 # The following properties are affected by this value
1702 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1703 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1707 # Mangler used on diag output
1708 # It is sometimes necessary to mangle (encode) the
1709 # diag ASCII text output in order for it to show up at the
1710 # other end. In particular, GDB may silently ignore raw
1713 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1714 # This option is not active
1715 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1718 # No user value, uncomment the following line to provide one.
1720 # value_source default
1721 # Default value: GDB
1722 # Legal values: "GDB" "None"
1727 # HAL interrupt handling
1728 # A number of configuration options related to interrupt
1729 # handling are common to most or all HAL packages, even though
1730 # the implementations will vary from architecture to
1733 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1734 # There is no associated value.
1738 # Use separate stack for interrupts
1739 # When an interrupt occurs this interrupt can be handled either
1740 # on the current stack or on a separate stack maintained by the
1741 # HAL. Using a separate stack requires a small number of extra
1742 # instructions in the interrupt handling code, but it has the
1743 # advantage that it is no longer necessary to allow extra space
1744 # in every thread stack for the interrupt handlers. The amount
1745 # of extra space required depends on the interrupt handlers
1746 # that are being used.
1748 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1750 # No user value, uncomment the following line to provide one.
1752 # The inferred value should not be edited directly.
1754 # value_source inferred
1757 # The following properties are affected by this value
1758 # package CYGPKG_REDBOOT
1759 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1762 # Interrupt stack size
1763 # This configuration option specifies the stack size in bytes
1764 # for the interrupt stack. Typically this should be a multiple
1765 # of 16, but the exact requirements will vary from architecture
1766 # to architecture. The interrupt stack serves two separate
1767 # purposes. It is used as the stack during system
1768 # initialization. In addition, if the interrupt system is
1769 # configured to use a separate stack then all interrupts will
1770 # be processed on this stack. The exact memory requirements
1771 # will vary from application to application, and will depend
1772 # heavily on whether or not other interrupt-related options,
1773 # for example nested interrupts, are enabled. On most targets,
1774 # in a configuration with no kernel this stack will also be
1775 # the stack used to invoke the application, and must obviously
1776 # be appropriately large in that case.
1778 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1780 # No user value, uncomment the following line to provide one.
1782 # value_source default
1783 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1784 # CYGPKG_KERNEL (unknown) == 0
1786 # Legal values: 128 to 1048576
1789 # Allow nested interrupts
1790 # When an interrupt occurs the HAL interrupt handling code can
1791 # either leave interrupts disabled for the duration of the
1792 # interrupt handling code, or by doing some extra work it can
1793 # reenable interrupts before invoking the interrupt handler and
1794 # thus allow nested interrupts to happen. If all the interrupt
1795 # handlers being used are small and do not involve any loops
1796 # then it is usually better to disallow nested interrupts.
1797 # However if any of the interrupt handlers are more complicated
1798 # than nested interrupts will usually be required.
1800 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1802 # No user value, uncomment the following line to provide one.
1804 # value_source default
1808 # Save minimum context on interrupt
1809 # The HAL interrupt handling code can exploit the calling conventions
1810 # defined for a given architecture to reduce the amount of state
1811 # that has to be saved. Generally this improves performance and
1812 # reduces code size. However it can make source-level debugging
1815 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1817 # No user value, uncomment the following line to provide one.
1819 # The inferred value should not be edited directly.
1821 # value_source inferred
1824 # The following properties are affected by this value
1825 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1826 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1827 # component CYGBLD_BUILD_REDBOOT
1828 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1831 # Chain all interrupts together
1832 # Interrupts can be attached to vectors either singly, or be
1833 # chained together. The latter is necessary if there is no way
1834 # of discovering which device has interrupted without
1835 # inspecting the device itself. It can also reduce the amount
1836 # of RAM needed for interrupt decoding tables and code.
1838 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1840 # No user value, uncomment the following line to provide one.
1842 # value_source default
1846 # Ignore spurious [fleeting] interrupts
1847 # On some hardware, interrupt sources may not be de-bounced or
1848 # de-glitched. Rather than try to handle these interrupts (no
1849 # handling may be possible), this option allows the HAL to simply
1850 # ignore them. In most cases, if the interrupt is real it will
1851 # reoccur in a detectable form.
1853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1855 # No user value, uncomment the following line to provide one.
1857 # value_source default
1862 # HAL context switch support
1863 # A number of configuration options related to thread contexts
1864 # are common to most or all HAL packages, even though the
1865 # implementations will vary from architecture to architecture.
1867 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1868 # There is no associated value.
1870 # The following properties are affected by this value
1874 # Use minimum thread context
1875 # The thread context switch code can exploit the calling
1876 # conventions defined for a given architecture to reduce the
1877 # amount of state that has to be saved during a context
1878 # switch. Generally this improves performance and reduces
1879 # code size. However it can make source-level debugging more
1882 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1884 # No user value, uncomment the following line to provide one.
1886 # The inferred value should not be edited directly.
1888 # value_source inferred
1891 # The following properties are affected by this value
1892 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1893 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1894 # component CYGBLD_BUILD_REDBOOT
1895 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # Explicit control over cache behaviour
1900 # These options let the default behaviour of the caches
1901 # be easily configurable.
1903 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1904 # There is no associated value.
1908 # Enable DATA cache on startup
1909 # Enabling this option will cause the data cache to be enabled
1910 # as soon as practicable when eCos starts up. One would choose
1911 # to disable this if the data cache cannot safely be turned on,
1912 # such as a case where the cache(s) require additional platform
1915 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1917 # No user value, uncomment the following line to provide one.
1919 # value_source default
1924 # DATA cache mode on startup
1925 # This option controls the mode the cache will be set to
1926 # when enabled on startup.
1928 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1930 # No user value, uncomment the following line to provide one.
1931 # user_value COPYBACK
1932 # value_source default
1933 # Default value: COPYBACK
1934 # Legal values: "COPYBACK" "WRITETHRU"
1938 # Enable INSTRUCTION cache on startup
1939 # Enabling this option will cause the instruction cache to be enabled
1940 # as soon as practicable when eCos starts up. One would choose
1941 # to disable this if the instruction cache cannot safely be turned on,
1942 # such as a case where the cache(s) require additional platform
1945 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1947 # No user value, uncomment the following line to provide one.
1949 # value_source default
1954 # Source-level debugging support
1955 # If the source level debugger gdb is to be used for debugging
1956 # application code then it may be necessary to configure in support
1957 # for this in the HAL.
1959 cdl_component CYGPKG_HAL_DEBUG {
1960 # There is no associated value.
1964 # Support for GDB stubs
1965 # The HAL implements GDB stubs for the target.
1967 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1968 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1969 # This value cannot be modified here.
1973 # The following properties are affected by this value
1974 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1975 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1976 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1977 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1980 # Include GDB stubs in HAL
1981 # This option causes a set of GDB stubs to be included into the
1982 # system. On some target systems the GDB support will be
1983 # provided by other means, for example by a ROM monitor. On
1984 # other targets, especially when building a ROM-booting system,
1985 # the necessary support has to go into the target library
1986 # itself. When GDB stubs are include in a configuration, HAL
1987 # serial drivers must also be included.
1989 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1990 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1991 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1995 # No user value, uncomment the following line to provide one.
1997 # The inferred value should not be edited directly.
1999 # value_source inferred
2001 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2002 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2004 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2005 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2007 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2008 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2010 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2015 # The following properties are affected by this value
2016 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2017 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2018 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2020 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2021 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2022 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2023 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2024 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2025 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2027 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2029 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGPKG_HAL_GDB_FILEIO
2031 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2033 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # Support for external break support in GDB stubs
2041 # The HAL implements external break (or asynchronous interrupt)
2042 # in the GDB stubs for the target.
2044 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2045 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2046 # This value cannot be modified here.
2050 # The following properties are affected by this value
2051 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2052 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2055 # Include GDB external break support for stubs
2056 # This option causes the GDB stub to add a serial interrupt handler
2057 # which will listen for GDB break packets. This lets you stop the
2058 # target asynchronously when using GDB, usually by hitting Control+C
2059 # or pressing the STOP button. This option differs from
2060 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2061 # GDB stubs are present.
2063 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2064 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2065 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2069 # No user value, uncomment the following line to provide one.
2071 # value_source default
2072 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2073 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2075 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2076 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2082 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2083 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2084 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2085 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # Platform does not support CTRLC
2090 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2091 # No options implement this inferface
2092 # This value cannot be modified here.
2096 # The following properties are affected by this value
2097 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2098 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # Include GDB external break support when no stubs
2102 # This option adds an interrupt handler for the GDB serial line
2103 # which will listen for GDB break packets. This lets you stop the
2104 # target asynchronously when using GDB, usually by hitting Control+C
2105 # or pressing the STOP button. This option differs from
2106 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2107 # stubs are NOT present.
2109 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2110 # This option is not active
2111 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2115 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2116 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2120 # No user value, uncomment the following line to provide one.
2122 # value_source default
2123 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2124 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2126 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2127 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2130 # The following properties are affected by this value
2131 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2132 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # component CYGBLD_BUILD_REDBOOT
2134 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2137 # Include GDB multi-threading debug support
2138 # This option enables some extra HAL code which is needed
2139 # to support multi-threaded source level debugging.
2141 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2142 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2143 # CYGSEM_HAL_ROM_MONITOR == 1
2144 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2148 # No user value, uncomment the following line to provide one.
2150 # value_source default
2153 # The following properties are affected by this value
2154 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2155 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2156 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2157 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2160 # Number of times to retry sending a $O packet
2161 # This option controls the number of attempts that eCos programs
2162 # will make to send a $O packet to a host GDB process. If it is
2163 # set non-zero, then the target process will attempt to resend the
2164 # $O packet data up to this number of retries. Caution: use of
2165 # this option is not recommended as it can thoroughly confuse the
2168 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2170 # No user value, uncomment the following line to provide one.
2172 # value_source default
2176 # Timeout period for GDB packets
2177 # This option controls the time (in milliseconds) that eCos programs
2178 # will wait for a response when sending packets to a host GDB process.
2179 # If this time elapses, then the packet will be resent, up to some
2180 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2182 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2184 # No user value, uncomment the following line to provide one.
2186 # value_source default
2187 # Default value: 500
2190 # Location of CRC32 table
2191 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2192 # and placed in ROM, or generated at runtime in RAM. Depending on
2193 # your memory constraints, one of these options may be better.
2195 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2197 # No user value, uncomment the following line to provide one.
2199 # value_source default
2200 # Default value: RAM
2201 # Legal values: "ROM" "RAM"
2205 # ROM monitor support
2206 # Support for ROM monitors can be built in to your application.
2207 # It may also be relevant to build your application as a ROM monitor
2208 # itself. Such options are contained here if relevant for your chosen
2209 # platform. The options and ROM monitors available to choose are
2210 # platform-dependent.
2212 cdl_component CYGPKG_HAL_ROM_MONITOR {
2213 # There is no associated value.
2215 # The following properties are affected by this value
2219 # Target has virtual vector support
2221 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2222 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2223 # This value cannot be modified here.
2227 # The following properties are affected by this value
2228 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2229 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2232 # Target supports baud rate control via vectors
2233 # Whether this target supports the __COMMCTL_GETBAUD
2234 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2236 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2237 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2238 # This value cannot be modified here.
2242 # The following properties are affected by this value
2243 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2244 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2247 # Enable use of virtual vector calling interface
2248 # Virtual vector support allows the HAL to let the ROM
2249 # monitor handle certain operations. The virtual vector table
2250 # defines a calling interface between applications running in
2251 # RAM and the ROM monitor.
2253 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2254 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2255 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2258 # Calculated value: 1
2262 # The following properties are affected by this value
2263 # component CYGBLD_BUILD_REDBOOT
2264 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2265 # package CYGPKG_DEVS_ETH_PHY
2266 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # Inherit console settings from ROM monitor
2271 # When this option is set, the application will inherit
2272 # the console as set up by the ROM monitor. This means
2273 # that the application will use whatever channel and
2274 # mangling style was used by the ROM monitor when
2275 # the application was launched.
2277 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2278 # This option is not active
2279 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2280 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2284 # No user value, uncomment the following line to provide one.
2286 # value_source default
2287 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2291 # The following properties are affected by this value
2292 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2293 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2294 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2295 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # Debug channel is configurable
2299 # This option is a configuration hint - it is enabled
2300 # when the HAL initialization code will make use
2301 # of the debug channel configuration option.
2303 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2304 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2305 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2314 # Console channel is configurable
2315 # This option is a configuration hint - it is enabled
2316 # when the HAL initialization code will make use
2317 # of the console channel configuration option.
2319 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2320 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2321 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2322 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2326 # The following properties are affected by this value
2327 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2328 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2331 # Initialize whole of virtual vector table
2332 # This option will cause the whole of the virtual
2333 # vector table to be initialized with dummy values on
2334 # startup. When this option is enabled, all the
2335 # options below must also be enabled - or the
2336 # table would be empty when the application
2338 # On targets where older ROM monitors without
2339 # virtual vector support may still be in use, it is
2340 # necessary for RAM applictions to initialize the
2341 # table (since all HAL diagnostics and debug IO
2342 # happens via the table).
2344 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2346 # No user value, uncomment the following line to provide one.
2348 # value_source default
2349 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2350 # CYG_HAL_STARTUP == ROMRAM
2351 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2353 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2356 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2357 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2369 # The following properties are affected by this value
2370 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2371 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2372 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2373 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2374 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2375 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2377 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2386 # Claim virtual vector table entries by default
2387 # By default most virtual vectors will be claimed by
2388 # RAM startup configurations, meaning that the RAM
2389 # application will provide the services. The
2390 # exception is COMMS support (HAL
2391 # diagnostics/debugging IO) which is left in the
2392 # control of the ROM monitor.
2393 # The reasoning behind this is to get as much of the
2394 # code exercised during regular development so it
2395 # is known to be working the few times a new ROM
2396 # monitor or a ROM production configuration is used
2397 # - COMMS are excluded only by necessity in order to
2398 # avoid breaking an existing debugger connections
2399 # (there may be ways around this).
2400 # For production RAM configurations this option can
2401 # be switched off, causing the appliction to rely on
2402 # the ROM monitor for these services, thus
2403 # saving some space.
2404 # Individual vectors may also be left unclaimed,
2405 # controlled by the below options (meaning that the
2406 # associated service provided by the ROM monitor
2409 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2410 # This option is not active
2411 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2412 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2416 # No user value, uncomment the following line to provide one.
2418 # value_source default
2421 # The following properties are affected by this value
2422 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2423 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2424 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2425 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2426 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2427 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # Claim reset virtual vectors
2433 # This option will cause the reset and kill_by_reset
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2446 # The following properties are affected by this value
2447 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2448 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2451 # Claim version virtual vectors
2452 # This option will cause the version
2453 # virtual vectors to be claimed.
2455 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2457 # No user value, uncomment the following line to provide one.
2459 # value_source default
2460 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2461 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2465 # Claim delay_us virtual vector
2466 # This option will cause the delay_us
2467 # virtual vector to be claimed.
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2484 # Claim cache virtual vectors
2485 # This option will cause the cache virtual vectors
2488 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2490 # No user value, uncomment the following line to provide one.
2492 # value_source default
2493 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2498 # The following properties are affected by this value
2499 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2500 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2503 # Claim data virtual vectors
2504 # This option will cause the data virtual vectors
2505 # to be claimed. At present there is only one, used
2506 # by the RedBoot ethernet driver to share diag output.
2508 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2510 # No user value, uncomment the following line to provide one.
2512 # value_source default
2513 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2518 # The following properties are affected by this value
2519 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2520 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2523 # Claim comms virtual vectors
2524 # This option will cause the communication tables
2525 # that are part of the virtual vectors mechanism to
2526 # be claimed. Note that doing this may cause an
2527 # existing ROM monitor communication connection to
2528 # be closed. For this reason, the option is disabled
2529 # per default for normal application
2532 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2534 # No user value, uncomment the following line to provide one.
2536 # value_source default
2537 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2538 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2539 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2542 # The following properties are affected by this value
2543 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2545 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2546 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2547 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2548 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2549 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2550 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # Do diagnostic IO via virtual vector table
2554 # All HAL IO happens via the virtual vector table / comm
2555 # tables when those tables are supported by the HAL.
2556 # If so desired, the low-level IO functions can
2557 # still be provided by the RAM application by
2558 # enabling the CLAIM_COMMS option.
2560 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2561 # Calculated value: 1
2565 # The following properties are affected by this value
2566 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2567 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2568 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2569 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2573 # Behave as a ROM monitor
2574 # Enable this option if this program is to be used as a ROM monitor,
2575 # i.e. applications will be loaded into RAM on the TX53 module, and this
2576 # ROM monitor may process exceptions or interrupts generated from the
2577 # application. This enables features such as utilizing a separate
2578 # interrupt stack when exceptions are generated.
2580 cdl_option CYGSEM_HAL_ROM_MONITOR {
2582 # No user value, uncomment the following line to provide one.
2584 # The inferred value should not be edited directly.
2586 # value_source inferred
2588 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2589 # CYG_HAL_STARTUP == ROMRAM
2590 # CYG_HAL_STARTUP == ROMRAM
2593 # The following properties are affected by this value
2594 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2595 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2596 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2597 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2598 # option CYGPRI_REDBOOT_ROM_MONITOR
2599 # Requires: CYGSEM_HAL_ROM_MONITOR
2602 # Work with a ROM monitor
2603 # Support can be enabled for different varieties of ROM monitor.
2604 # This support changes various eCos semantics such as the encoding
2605 # of diagnostic output, or the overriding of hardware interrupt
2607 # Firstly there is "Generic" support which prevents the HAL
2608 # from overriding the hardware vectors that it does not use, to
2609 # instead allow an installed ROM monitor to handle them. This is
2610 # the most basic support which is likely to be common to most
2611 # implementations of ROM monitor.
2612 # "GDB_stubs" provides support when GDB stubs are included in
2613 # the ROM monitor or boot ROM.
2615 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2617 # No user value, uncomment the following line to provide one.
2619 # value_source default
2620 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2621 # CYG_HAL_STARTUP == ROMRAM
2623 # Legal values: "Generic" "GDB_stubs"
2624 # Requires: CYG_HAL_STARTUP == "RAM"
2625 # CYG_HAL_STARTUP == ROMRAM
2628 # The following properties are affected by this value
2629 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2630 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2631 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2632 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2633 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2634 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2635 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2636 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2640 # Platform defined I/O channels.
2641 # Platforms which provide additional I/O channels can implement
2642 # this interface, indicating that the function plf_if_init()
2643 # needs to be called.
2645 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2646 # No options implement this inferface
2647 # This value cannot be modified here.
2652 # Platform IDE I/O support.
2653 # Platforms which provide IDE controllers can implement
2654 # this interface, indicating that IDE I/O macros are
2657 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2658 # No options implement this inferface
2659 # This value cannot be modified here.
2663 # The following properties are affected by this value
2664 # component CYGSEM_REDBOOT_DISK_IDE
2665 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2668 # File I/O operations via GDB
2669 # This option enables support for various file I/O
2670 # operations using the GDB remote protocol to communicate
2671 # with GDB. The operations are then performed on the
2672 # debugging host by proxy. These operations are only
2673 # currently available by using a system call interface
2674 # to RedBoot. This may change in the future.
2676 cdl_option CYGPKG_HAL_GDB_FILEIO {
2677 # This option is not active
2678 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2679 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2683 # No user value, uncomment the following line to provide one.
2685 # value_source default
2687 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2688 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2692 # Build Compiler sanity checking tests
2693 # Enabling this option causes compiler tests to be built.
2695 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2697 # No user value, uncomment the following line to provide one.
2699 # value_source default
2702 # The following properties are affected by this value
2703 # component CYGPKG_HAL_TESTS
2704 # Calculated: "tests/context tests/basic"
2705 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2706 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2707 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2711 # This option specifies the set of tests for the common HAL.
2713 cdl_component CYGPKG_HAL_TESTS {
2714 # Calculated value: "tests/context tests/basic"
2715 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2716 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2717 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2718 # CYGINT_HAL_TESTS_NO_CACHES == 0
2719 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2720 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2722 # Current_value: tests/context tests/basic tests/cache tests/intr
2726 # Interface for cache presence
2727 # Some architectures and/or platforms do not have caches. By
2728 # implementing this interface, these can disable the various
2729 # cache-related tests.
2731 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2732 # No options implement this inferface
2733 # This value cannot be modified here.
2735 # Current value: 0 0
2737 # The following properties are affected by this value
2738 # component CYGPKG_HAL_TESTS
2739 # Calculated: "tests/context tests/basic"
2740 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2741 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2742 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2747 # The ARM architecture HAL package provides generic
2748 # support for this processor architecture. It is also
2749 # necessary to select a specific target platform HAL
2752 cdl_package CYGPKG_HAL_ARM {
2753 # Packages cannot be added or removed, nor can their version be changed,
2754 # simply by editing their value. Instead the appropriate configuration
2755 # should be used to perform these actions.
2757 # This value cannot be modified here.
2759 # Current value: 1 current
2761 # The following properties are affected by this value
2762 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2763 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2764 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2765 # ActiveIf: CYGPKG_HAL_ARM
2769 # The CPU architecture supports THUMB mode
2771 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2772 # No options implement this inferface
2773 # This value cannot be modified here.
2777 # The following properties are affected by this value
2778 # option CYGHWR_THUMB
2779 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2780 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2781 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2784 # Enable Thumb instruction set
2785 # Enable use of the Thumb instruction set.
2787 cdl_option CYGHWR_THUMB {
2788 # This option is not active
2789 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2794 # No user value, uncomment the following line to provide one.
2796 # value_source default
2799 # The following properties are affected by this value
2800 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2801 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2804 # Enable Thumb interworking compiler option
2805 # This option controls the use of -mthumb-interwork in the
2806 # compiler flags. It defaults enabled in Thumb or ROM monitor
2807 # configurations, but can be overridden for reduced memory
2808 # footprint where interworking is not a requirement.
2810 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2811 # This option is not active
2812 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2813 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2820 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2822 # CYGSEM_HAL_ROM_MONITOR == 1
2826 # The platform and architecture supports Big Endian operation
2828 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2829 # No options implement this inferface
2830 # This value cannot be modified here.
2834 # The following properties are affected by this value
2835 # option CYGHWR_HAL_ARM_BIGENDIAN
2836 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2839 # Use big-endian mode
2840 # Use the CPU in big-endian mode.
2842 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2843 # This option is not active
2844 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2845 # CYGINT_HAL_ARM_BIGENDIAN == 0
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # The platform uses a processor with an ARM7 core
2857 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_CPU_FAMILY
2865 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2866 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2867 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2868 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2878 # The platform uses a processor with an ARM9 core
2880 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2881 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2882 # This value cannot be modified here.
2886 # The following properties are affected by this value
2887 # option CYGHWR_HAL_ARM_CPU_FAMILY
2888 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2889 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2890 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2891 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2901 # The platform uses a processor with a StrongARM core
2903 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2904 # No options implement this inferface
2905 # This value cannot be modified here.
2909 # The following properties are affected by this value
2910 # option CYGHWR_HAL_ARM_CPU_FAMILY
2911 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2912 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2913 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2914 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2924 # The platform uses a processor with a XScale core
2926 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2927 # No options implement this inferface
2928 # This value cannot be modified here.
2932 # The following properties are affected by this value
2933 # option CYGHWR_HAL_ARM_CPU_FAMILY
2934 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2935 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2936 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2937 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2948 # It is possible to optimize code for different
2949 # ARM CPU families. This option selects which CPU to
2950 # optimize for on boards that support multiple CPU types.
2952 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2958 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2959 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2960 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2962 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2963 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2964 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2965 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2967 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2968 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2969 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2970 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2972 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2973 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2974 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2975 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2978 # Provide diagnostic dump for exceptions
2979 # Print messages about hardware exceptions, including
2980 # raw exception frame dump and register contents.
2982 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2988 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2989 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2993 # Process all exceptions with the eCos application
2994 # Normal RAM-based programs which do not include GDB stubs
2995 # defer processing of the illegal instruction exception to GDB.
2996 # Setting this options allows the program to explicitly handle
2997 # the illegal instruction exception itself. Note: this will
2998 # prevent the use of GDB to debug the application as breakpoints
2999 # will no longer work.
3001 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3009 # Support GDB thread operations via ICE/Multi-ICE
3010 # Allow GDB to get thread information via the ICE/Multi-ICE
3013 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3015 # No user value, uncomment the following line to provide one.
3017 # value_source default
3019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3020 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3023 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3025 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3026 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3030 # Support for 'gprof' callbacks
3031 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3032 # to acquire the interrupt-context PC and SP, when this option is
3035 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3036 # This option is not active
3037 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3038 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3040 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3042 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3045 # Calculated value: 1
3050 # Accept exceptions and irq's occurring in user mode
3051 # For standalone Redboot based programs running in user mode.
3053 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3055 # No user value, uncomment the following line to provide one.
3057 # value_source default
3061 # Preserve svc spsr before returning to svc mode
3062 # This option secures exception and breakpoint processing
3063 # triggered during execution of application specific SWI
3066 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3068 # No user value, uncomment the following line to provide one.
3070 # value_source default
3076 cdl_option CYGBLD_LINKER_SCRIPT {
3077 # Calculated value: "src/arm.ld"
3079 # Current_value: src/arm.ld
3082 # Implementations of hal_arm_mem_real_region_top()
3084 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3085 # No options implement this inferface
3086 # This value cannot be modified here.
3091 # Freescale SoC architecture
3092 # This HAL variant package provides generic
3093 # support for the Freescale SoC. It is also
3094 # necessary to select a specific target platform HAL
3097 cdl_package CYGPKG_HAL_ARM_MX53 {
3098 # Packages cannot be added or removed, nor can their version be changed,
3099 # simply by editing their value. Instead the appropriate configuration
3100 # should be used to perform these actions.
3102 # This value cannot be modified here.
3104 # Current value: 1 current
3106 # The following properties are affected by this value
3107 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3108 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3112 # Processor clock rate
3113 # The processor can run at various frequencies.
3114 # These values are expressed in KHz. Note that there are
3115 # several steppings of the rate to run at different
3116 # maximum frequencies. Check the specs to make sure that your
3117 # particular processor can run at the rate you select here.
3119 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3120 # This option is not active
3121 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3122 # CYG_HAL_STARTUP == ROMRAM
3126 # No user value, uncomment the following line to provide one.
3128 # value_source default
3129 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3130 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3131 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3132 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3134 # Legal values: 150000 200000
3137 # Real-time clock constants
3139 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3140 # There is no associated value.
3144 # Real-time clock numerator
3146 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3147 # Calculated value: 1000000000
3149 # Current_value: 1000000000
3152 # Real-time clock denominator
3153 # This option selects the heartbeat rate for the real-time clock.
3154 # The rate is specified in ticks per second. Change this value
3155 # with caution - too high and your system will become saturated
3156 # just handling clock interrupts, too low and some operations
3157 # such as thread scheduling may become sluggish.
3159 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3161 # No user value, uncomment the following line to provide one.
3163 # value_source default
3164 # Default value: 100
3166 # The following properties are affected by this value
3167 # option CYGNUM_HAL_RTC_PERIOD
3168 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3171 # Real-time clock period
3173 cdl_option CYGNUM_HAL_RTC_PERIOD {
3174 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3175 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3177 # Current_value: 36864
3181 # UART1 available as diagnostic/debug channel
3182 # The chip has multiple serial channels which may be
3183 # used for different things on different platforms. This
3184 # interface allows a platform to indicate that the specified
3185 # serial port can be used as a diagnostic and/or debug channel.
3187 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3188 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3189 # This value cannot be modified here.
3193 # The following properties are affected by this value
3196 # UART2 available as diagnostic/debug channel
3197 # The chip has multiple serial channels which may be
3198 # used for different things on different platforms. This
3199 # interface allows a platform to indicate that the specified
3200 # serial port can be used as a diagnostic and/or debug channel.
3202 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3203 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3204 # This value cannot be modified here.
3208 # The following properties are affected by this value
3211 # UART3 available as diagnostic/debug channel
3212 # The chip has multiple serial channels which may be
3213 # used for different things on different platforms. This
3214 # interface allows a platform to indicate that the specified
3215 # serial port can be used as a diagnostic and/or debug channel.
3217 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3218 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3219 # This value cannot be modified here.
3223 # The following properties are affected by this value
3226 # UART4 available as diagnostic/debug channel
3227 # The chip has multiple serial channels which may be
3228 # used for different things on different platforms. This
3229 # interface allows a platform to indicate that the specified
3230 # serial port can be used as a diagnostic and/or debug channel.
3232 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3233 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3234 # This value cannot be modified here.
3238 # The following properties are affected by this value
3241 # UART5 available as diagnostic/debug channel
3242 # The chip has multiple serial channels which may be
3243 # used for different things on different platforms. This
3244 # interface allows a platform to indicate that the specified
3245 # serial port can be used as a diagnostic and/or debug channel.
3247 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3248 # No options implement this inferface
3249 # This value cannot be modified here.
3255 # This HAL platform package provides generic
3256 # support for the Ka-Ro electronics TX53 module.
3258 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3259 # Packages cannot be added or removed, nor can their version be changed,
3260 # simply by editing their value. Instead the appropriate configuration
3261 # should be used to perform these actions.
3263 # This value cannot be modified here.
3265 # Current value: 1 current
3266 # Requires: CYGINT_ISO_CTYPE
3267 # CYGINT_ISO_CTYPE == 1
3269 # Requires: CYGBLD_BUILD_REDBOOT == 1
3270 # CYGBLD_BUILD_REDBOOT == 1
3276 # The only startup type allowed is ROMRAM, since this will allow
3277 # the program to exist in ROM, but be copied to RAM during startup
3278 # which is required to boot from NAND flash.
3280 cdl_component CYG_HAL_STARTUP {
3282 # No user value, uncomment the following line to provide one.
3284 # value_source default
3285 # Default value: ROMRAM
3286 # Legal values: "ROMRAM" "RAM"
3288 # The following properties are affected by this value
3289 # option CYGSEM_HAL_ROM_MONITOR
3290 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3291 # option CYGSEM_HAL_ROM_MONITOR
3292 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3293 # option CYGSEM_HAL_USE_ROM_MONITOR
3294 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3295 # option CYGSEM_HAL_USE_ROM_MONITOR
3296 # Requires: CYG_HAL_STARTUP == "RAM"
3297 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3298 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3299 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3300 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3301 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3302 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3303 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3304 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3305 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3306 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3307 # option CYGPRI_REDBOOT_ROM_MONITOR
3308 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3309 # option CYGPRI_REDBOOT_ROM_MONITOR
3310 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3313 # Diagnostic serial port baud rate
3314 # This option selects the baud rate used for the console port.
3315 # Note: this should match the value chosen for the GDB port if the
3316 # console and GDB port are the same.
3318 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3320 # No user value, uncomment the following line to provide one.
3322 # value_source default
3323 # Default value: 115200
3324 # Legal values: 9600 19200 38400 57600 115200
3327 # GDB serial port baud rate
3328 # This option selects the baud rate used for the GDB port.
3329 # Note: this should match the value chosen for the console port if the
3330 # console and GDB port are the same.
3332 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3334 # No user value, uncomment the following line to provide one.
3336 # value_source default
3337 # Default value: 115200
3338 # Legal values: 9600 19200 38400 57600 115200
3341 # Number of communication channels on the TX53
3343 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3344 # Calculated value: 3
3348 # The following properties are affected by this value
3349 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3350 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3351 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3352 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3353 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3354 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3358 # The TX53 provides access to three serial ports. This option
3359 # chooses which port will be used to connect to a host
3362 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3363 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3364 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3368 # No user value, uncomment the following line to provide one.
3370 # value_source default
3372 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3373 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3376 # Default console channel.
3378 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3379 # Calculated value: 0
3382 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3383 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3385 # The following properties are affected by this value
3386 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3387 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3390 # Console serial port
3391 # The TX53 provides access to three serial ports. This option
3392 # chooses which port will be used for console output.
3394 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3395 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3396 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3400 # No user value, uncomment the following line to provide one.
3402 # value_source default
3403 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3404 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3406 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3410 # Ka-Ro electronics TX53 module build options
3411 # Package specific build options including control over
3412 # compiler flags used only in building this package,
3413 # and details of which tests are built.
3415 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3416 # There is no associated value.
3417 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3418 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3424 # This option specifies the SDRAM size of the TX53 module.
3426 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3428 user_value 0x40000000
3430 # Default value: 0x20000000
3431 # Legal values: 0x40000000 0x20000000
3435 # This option specifies the SDRAM clock im MHz of the TX53 module.
3437 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_CLK {
3439 # No user value, uncomment the following line to provide one.
3441 # value_source default
3442 # Default value: 400
3443 # Legal values: 216 400
3446 # Enable low level debugging with LED
3447 # This option enables low level debugging by blink codes
3448 # of the LED on STK5.
3450 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3452 # No user value, uncomment the following line to provide one.
3454 # value_source default
3455 # Default value: false
3456 # false (unknown) == 0
3460 # Additional compiler flags
3461 # This option modifies the set of compiler flags for
3462 # building the TX53 HAL. These flags are used in addition
3463 # to the set of global flags.
3465 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3467 # No user value, uncomment the following line to provide one.
3469 # value_source default
3473 # Suppressed compiler flags
3474 # This option modifies the set of compiler flags for
3475 # building the TX53 HAL. These flags are removed from
3476 # the set of global flags if present.
3478 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3480 # No user value, uncomment the following line to provide one.
3482 # value_source default
3486 # Show a splash screen from the FIS partition: 'logo'
3487 # When this option is enabled, RedBoot will look for a flash partition
3488 # named 'logo' and display the contents of this partition as initial
3491 cdl_option CYGHWR_MX53_LCD_LOGO {
3492 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3493 # CYGPKG_DEVS_IMX_IPU == current
3497 # No user value, uncomment the following line to provide one.
3499 # value_source default
3506 cdl_component CYGHWR_MEMORY_LAYOUT {
3507 # Calculated value: "arm_tx53_romram"
3509 # Current_value: arm_tx53_romram
3513 # Memory layout linker script fragment
3515 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3516 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3518 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3521 # Memory layout header file
3523 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3524 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3526 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3535 # Common types and useful macros.
3536 # Tracing and assertion facilities.
3537 # Package startup options.
3539 cdl_package CYGPKG_INFRA {
3540 # Packages cannot be added or removed, nor can their version be changed,
3541 # simply by editing their value. Instead the appropriate configuration
3542 # should be used to perform these actions.
3544 # This value cannot be modified here.
3546 # Current value: 1 current
3548 # The following properties are affected by this value
3549 # package CYGPKG_HAL
3550 # Requires: CYGPKG_INFRA
3551 # component CYGBLD_BUILD_REDBOOT
3552 # Requires: CYGPKG_INFRA
3557 # The eCos source code contains a significant amount of
3558 # internal debugging support, in the form of assertions and
3560 # Assertions check at runtime that various conditions are as
3561 # expected; if not, execution is halted.
3562 # Tracing takes the form of text messages that are output
3563 # whenever certain events occur, or whenever functions are
3565 # The most important property of these checks and messages is
3566 # that they are not required for the program to run.
3567 # It is prudent to develop software with assertions enabled,
3568 # but disable them when making a product release, thus
3569 # removing the overhead of that checking.
3570 # It is possible to enable assertions and tracing
3572 # There are also options controlling the exact behaviour of
3573 # the assertion and tracing facilities, thus giving users
3574 # finer control over the code and data size requirements.
3576 cdl_component CYGPKG_INFRA_DEBUG {
3578 # No user value, uncomment the following line to provide one.
3580 # value_source default
3583 # The following properties are affected by this value
3584 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3585 # ActiveIf: CYGPKG_INFRA_DEBUG
3590 # If this option is defined, asserts in the code are tested.
3591 # Assert functions (CYG_ASSERT()) are defined in
3592 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3593 # If it is not defined, these result in no additional
3594 # object code and no checking of the asserted conditions.
3596 cdl_component CYGDBG_USE_ASSERTS {
3597 # This option is not active
3598 # The parent CYGPKG_INFRA_DEBUG is disabled
3601 # No user value, uncomment the following line to provide one.
3603 # value_source default
3605 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3606 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3609 # The following properties are affected by this value
3610 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3611 # Requires: CYGDBG_USE_ASSERTS
3612 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3613 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3618 # This option allows individual control of preconditions.
3619 # A precondition is one type of assert, which it is
3620 # useful to control separately from more general asserts.
3621 # The function is CYG_PRECONDITION(condition,msg).
3623 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3624 # This option is not active
3625 # The parent CYGDBG_USE_ASSERTS is not active
3628 # No user value, uncomment the following line to provide one.
3630 # value_source default
3635 # This option allows individual control of postconditions.
3636 # A postcondition is one type of assert, which it is
3637 # useful to control separately from more general asserts.
3638 # The function is CYG_POSTCONDITION(condition,msg).
3640 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3641 # This option is not active
3642 # The parent CYGDBG_USE_ASSERTS is not active
3645 # No user value, uncomment the following line to provide one.
3647 # value_source default
3652 # This option allows individual control of loop invariants.
3653 # A loop invariant is one type of assert, which it is
3654 # useful to control separately from more general asserts,
3655 # particularly since a loop invariant is typically evaluated
3656 # a great many times when used correctly.
3657 # The function is CYG_LOOP_INVARIANT(condition,msg).
3659 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3660 # This option is not active
3661 # The parent CYGDBG_USE_ASSERTS is not active
3664 # No user value, uncomment the following line to provide one.
3666 # value_source default
3671 # All assertions within eCos contain a text message
3672 # which should give some information about the condition
3674 # These text messages will end up being embedded in the
3675 # application image and hence there is a significant penalty
3676 # in terms of image size.
3677 # It is possible to suppress the use of these messages by
3678 # disabling this option.
3679 # This results in smaller code size, but there is less
3680 # human-readable information if an assertion actually gets
3683 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3684 # This option is not active
3685 # The parent CYGDBG_USE_ASSERTS is not active
3688 # No user value, uncomment the following line to provide one.
3690 # value_source default
3696 # If this option is defined, tracing operations
3697 # result in output or logging, depending on other options.
3698 # This may have adverse effects on performance, if the time
3699 # taken to output message overwhelms the available CPU
3700 # power or output bandwidth.
3701 # Trace functions (CYG_TRACE()) are defined in
3702 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3703 # If it is not defined, these result in no additional
3704 # object code and no trace information.
3706 cdl_component CYGDBG_USE_TRACING {
3707 # This option is not active
3708 # The parent CYGPKG_INFRA_DEBUG is disabled
3711 # No user value, uncomment the following line to provide one.
3713 # value_source default
3715 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3716 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3719 # The following properties are affected by this value
3720 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3721 # ActiveIf: CYGDBG_USE_TRACING
3722 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3723 # ActiveIf: CYGDBG_USE_TRACING
3724 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3725 # ActiveIf: CYGDBG_USE_TRACING
3726 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3727 # ActiveIf: CYGDBG_USE_TRACING
3728 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3729 # ActiveIf: CYGDBG_USE_TRACING
3733 # Trace function reports
3734 # This option allows individual control of
3735 # function entry/exit tracing, independent of
3736 # more general tracing output.
3737 # This may be useful to remove clutter from a
3740 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3741 # This option is not active
3742 # The parent CYGDBG_USE_TRACING is not active
3743 # The parent CYGDBG_USE_TRACING is disabled
3746 # No user value, uncomment the following line to provide one.
3748 # value_source default
3753 # All trace calls within eCos contain a text message
3754 # which should give some information about the circumstances.
3755 # These text messages will end up being embedded in the
3756 # application image and hence there is a significant penalty
3757 # in terms of image size.
3758 # It is possible to suppress the use of these messages by
3759 # disabling this option.
3760 # This results in smaller code size, but there is less
3761 # human-readable information available in the trace output,
3762 # possibly only filenames and line numbers.
3764 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3765 # This option is not active
3766 # The parent CYGDBG_USE_TRACING is not active
3767 # The parent CYGDBG_USE_TRACING is disabled
3770 # No user value, uncomment the following line to provide one.
3772 # value_source default
3777 # Trace output implementations
3779 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3780 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3781 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3782 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3783 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3784 # This option is not active
3785 # The parent CYGPKG_INFRA_DEBUG is disabled
3787 # This value cannot be modified here.
3791 # The following properties are affected by this value
3792 # component CYGDBG_USE_ASSERTS
3793 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3794 # component CYGDBG_USE_TRACING
3795 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3799 # A null output module which is useful when
3800 # debugging interactively; the output routines
3801 # can be breakpointed rather than have them actually
3802 # 'print' something.
3804 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3805 # This option is not active
3806 # The parent CYGPKG_INFRA_DEBUG is disabled
3809 # No user value, uncomment the following line to provide one.
3811 # value_source default
3816 # An output module which produces simple output
3817 # from tracing and assertion events.
3819 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3820 # This option is not active
3821 # The parent CYGPKG_INFRA_DEBUG is disabled
3824 # No user value, uncomment the following line to provide one.
3826 # value_source default
3831 # An output module which produces fancy output
3832 # from tracing and assertion events.
3834 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3835 # This option is not active
3836 # The parent CYGPKG_INFRA_DEBUG is disabled
3839 # No user value, uncomment the following line to provide one.
3841 # value_source default
3846 # An output module which buffers output
3847 # from tracing and assertion events. The stored
3848 # messages are output when an assert fires, or
3849 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3851 # Of course, there will only be stored messages
3852 # if tracing per se (CYGDBG_USE_TRACING)
3855 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3856 # This option is not active
3857 # The parent CYGPKG_INFRA_DEBUG is disabled
3860 # No user value, uncomment the following line to provide one.
3862 # value_source default
3868 # The size of the trace buffer. This counts the number
3869 # of trace records stored. When the buffer fills it
3870 # either wraps, stops recording, or generates output.
3872 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3873 # This option is not active
3874 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3875 # ActiveIf constraint: CYGDBG_USE_TRACING
3876 # CYGDBG_USE_TRACING == 0
3880 # No user value, uncomment the following line to provide one.
3882 # value_source default
3884 # Legal values: 5 to 65535
3887 # Wrap trace buffer when full
3888 # When the trace buffer has filled with records it
3889 # starts again at the beginning. Hence only the last
3890 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3893 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3894 # This option is not active
3895 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3896 # ActiveIf constraint: CYGDBG_USE_TRACING
3897 # CYGDBG_USE_TRACING == 0
3901 # No user value, uncomment the following line to provide one.
3903 # value_source default
3907 # Halt trace buffer when full
3908 # When the trace buffer has filled with records it
3909 # stops recording. Hence only the first
3910 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3913 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3914 # This option is not active
3915 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3916 # ActiveIf constraint: CYGDBG_USE_TRACING
3917 # CYGDBG_USE_TRACING == 0
3921 # No user value, uncomment the following line to provide one.
3923 # value_source default
3927 # Print trace buffer when full
3928 # When the trace buffer has filled with records it
3929 # prints the contents of the buffer. The buffer is then
3930 # emptied and the system continues.
3932 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3933 # This option is not active
3934 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3935 # ActiveIf constraint: CYGDBG_USE_TRACING
3936 # CYGDBG_USE_TRACING == 0
3940 # No user value, uncomment the following line to provide one.
3942 # value_source default
3946 # Print trace buffer on assert fail
3947 # When an assertion fails the trace buffer will be
3948 # printed to the default diagnostic device.
3950 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3951 # This option is not active
3952 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3953 # ActiveIf constraint: CYGDBG_USE_TRACING
3954 # CYGDBG_USE_TRACING == 0
3958 # No user value, uncomment the following line to provide one.
3960 # value_source default
3965 # Use function names
3966 # All trace and assert calls within eCos contain a
3967 # reference to the builtin macro '__PRETTY_FUNCTION__',
3968 # which evaluates to a string containing
3969 # the name of the current function.
3970 # This is useful when reading a trace log.
3971 # It is possible to suppress the use of the function name
3972 # by disabling this option.
3973 # This results in smaller code size, but there is less
3974 # human-readable information available in the trace output,
3975 # possibly only filenames and line numbers.
3977 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3978 # This option is not active
3979 # The parent CYGPKG_INFRA_DEBUG is disabled
3982 # No user value, uncomment the following line to provide one.
3984 # value_source default
3990 # Some packages require a startup routine to be called.
3991 # This can be carried out by application code, by supplying
3992 # a routine called cyg_package_start() which calls the
3993 # appropriate package startup routine(s).
3994 # Alternatively, this routine can be constructed automatically
3995 # and configured to call the startup routines of your choice.
3997 cdl_component CYGPKG_INFRA_STARTUP {
3998 # There is no associated value.
4002 # Start uITRON subsystem
4003 # Generate a call to initialize the
4004 # uITRON compatibility subsystem
4005 # within the system version of cyg_package_start().
4006 # This enables compatibility with uITRON.
4007 # You must configure uITRON with the correct tasks before
4008 # starting the uItron subsystem.
4009 # If this is disabled, and you want to use uITRON,
4010 # you must call cyg_uitron_start() from your own
4011 # cyg_package_start() or cyg_userstart().
4013 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4014 # This option is not active
4015 # ActiveIf constraint: CYGPKG_UITRON
4016 # CYGPKG_UITRON (unknown) == 0
4020 # No user value, uncomment the following line to provide one.
4022 # value_source default
4024 # Requires: CYGPKG_UITRON
4025 # CYGPKG_UITRON (unknown) == 0
4030 # Smaller slower memcpy()
4031 # Enabling this option causes the implementation of
4032 # the standard memcpy() routine to reduce code
4033 # size at the expense of execution speed. This
4034 # option is automatically enabled with the use of
4035 # the -Os option to the compiler. Also note that
4036 # the compiler will try to use its own builtin
4037 # version of memcpy() if possible, ignoring the
4038 # implementation in this package, unless given
4039 # the -fno-builtin compiler option.
4041 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4043 # No user value, uncomment the following line to provide one.
4045 # value_source default
4049 # Smaller slower memset()
4050 # Enabling this option causes the implementation of
4051 # the standard memset() routine to reduce code
4052 # size at the expense of execution speed. This
4053 # option is automatically enabled with the use of
4054 # the -Os option to the compiler. Also note that
4055 # the compiler will try to use its own builtin
4056 # version of memset() if possible, ignoring the
4057 # implementation in this package, unless given
4058 # the -fno-builtin compiler option.
4060 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4062 # No user value, uncomment the following line to provide one.
4064 # value_source default
4068 # Provide empty C++ delete functions
4069 # To deal with virtual destructors, where the correct delete()
4070 # function must be called for the derived class in question, the
4071 # underlying delete is called when needed, from destructors. This
4072 # is regardless of whether the destructor is called by delete itself.
4073 # So there is a reference to delete() from all destructors. The
4074 # default builtin delete() attempts to call free() if there is
4075 # one defined. So, if you have destructors, and you have free(),
4076 # as in malloc() and free(), any destructor counts as a reference
4077 # to free(). So the dynamic memory allocation code is linked
4078 # in regardless of whether it gets explicitly called. This
4079 # increases code and data size needlessly.
4080 # To defeat this undesirable behaviour, we define empty versions
4081 # of delete and delete. But doing this prevents proper use
4082 # of dynamic memory in C++ programs via C++'s new and delete
4084 # Therefore, this option is provided
4085 # for explicitly disabling the provision of these empty functions,
4086 # so that new and delete can be used, if that is what is required.
4088 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4090 # No user value, uncomment the following line to provide one.
4092 # value_source default
4096 # Threshold for valid number of delete calls
4097 # Some users don't know about the empty delete function and then
4098 # wonder why their C++ classes are leaking memory. If
4099 # INFRA_DEBUG is enabled we keep a counter for the number of
4100 # times delete is called. If it goes above this threshold we throw
4101 # an assertion failure. This should point heavy users of
4102 # delete in the right direction without upsetting those who want
4103 # an empty delete function.
4105 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4106 # This option is not active
4107 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4108 # CYGPKG_INFRA_DEBUG == 0
4112 # No user value, uncomment the following line to provide one.
4114 # value_source default
4115 # Default value: 100
4118 # Provide dummy abort() function
4119 # This option controls the inclusion of a dummy abort() function.
4120 # Parts of the C and C++ compiler runtime systems contain references
4121 # to abort(), particulary in the C++ exception handling code. It is
4122 # not possible to eliminate these references, so this dummy function
4123 # in included to satisfy them. It is not expected that this function
4124 # will ever be called, so its current behaviour is to simply loop.
4126 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4128 # No user value, uncomment the following line to provide one.
4130 # value_source default
4131 # Default value: CYGINT_ISO_EXIT == 0
4132 # CYGINT_ISO_EXIT == 0
4134 # Requires: !CYGINT_ISO_EXIT
4135 # CYGINT_ISO_EXIT == 0
4139 # Reset platform at end of test case execution
4140 # If this option is set then test case programs will reset the platform
4141 # when they terminate, as opposed to the default which is to just hang
4144 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4146 # No user value, uncomment the following line to provide one.
4148 # value_source default
4152 # Provide dummy strlen() function
4153 # This option controls the inclusion of a dummy strlen() function.
4154 # Parts of the C and C++ compiler runtime systems contain references
4155 # to strlen(), particulary in the C++ exception handling code. It is
4156 # not possible to eliminate these references, so this dummy function
4157 # in included to satisfy them. While it is not expected that this function
4158 # will ever be called, it is functional but uses the simplest, smallest
4159 # algorithm. There is a faster version of strlen() in the C library.
4161 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4163 # No user value, uncomment the following line to provide one.
4165 # value_source default
4166 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4167 # CYGINT_ISO_STRING_STRFUNCS == 1
4169 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4170 # CYGINT_ISO_STRING_STRFUNCS == 1
4174 # Make all compiler warnings show as errors
4175 # Enabling this option will cause all compiler warnings to show
4176 # as errors and bring the library build to a halt. This is used
4177 # to ensure that the code base is warning free, and thus ensure
4178 # that newly introduced warnings stand out and get fixed before
4179 # they show up as weird run-time behavior.
4181 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4186 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4187 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4190 # The following properties are affected by this value
4191 # option CYGBLD_GLOBAL_CFLAGS
4192 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4195 # Make compiler and assembler communicate by pipe
4196 # Enabling this option will cause the compiler to feed the
4197 # assembly output the the assembler via a pipe instead of
4198 # via a temporary file. This normally reduces the build
4201 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4206 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4207 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4211 # Infra build options
4212 # Package specific build options including control over
4213 # compiler flags used only in building this package.
4215 cdl_component CYGPKG_INFRA_OPTIONS {
4216 # There is no associated value.
4220 # Additional compiler flags
4221 # This option modifies the set of compiler flags for
4222 # building the eCos infra package. These flags are used
4223 # in addition to the set of global flags.
4225 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4227 # No user value, uncomment the following line to provide one.
4228 # user_value "-fno-rtti -Woverloaded-virtual"
4229 # value_source default
4230 # Default value: "-fno-rtti -Woverloaded-virtual"
4233 # Suppressed compiler flags
4234 # This option modifies the set of compiler flags for
4235 # building the eCos infra package. These flags are removed from
4236 # the set of global flags if present.
4238 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4240 # No user value, uncomment the following line to provide one.
4241 # user_value -Wno-pointer-sign
4242 # value_source default
4243 # Default value: -Wno-pointer-sign
4246 # Suppressed linker flags
4247 # This option modifies the set of linker flags for
4248 # building the eCos infra package tests. These flags are removed from
4249 # the set of global flags if present.
4251 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4253 # No user value, uncomment the following line to provide one.
4254 # user_value -Wl,--gc-sections
4255 # value_source default
4256 # Default value: -Wl,--gc-sections
4259 # Additional linker flags
4260 # This option modifies the set of linker flags for
4261 # building the eCos infra package tests. These flags are added to
4262 # the set of global flags if present.
4264 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4266 # No user value, uncomment the following line to provide one.
4267 # user_value -Wl,--fatal-warnings
4268 # value_source default
4269 # Default value: -Wl,--fatal-warnings
4272 # Infra package tests
4274 cdl_component CYGPKG_INFRA_TESTS {
4275 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4277 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4281 # Number of times a test runs
4282 # This option controls the number of times tests will execute their
4283 # basic function. Not all tests will honor this setting, but those
4284 # that do will execute the test N times before terminating. A value
4285 # less than 0 indicates to run forever.
4287 cdl_option CYGNUM_TESTS_RUN_COUNT {
4289 # No user value, uncomment the following line to provide one.
4291 # value_source default
4298 # Redboot ROM monitor
4299 # doc: ref/redboot.html
4300 # This package supports the Redboot [stand-alone debug monitor]
4301 # using eCos as the underlying board support mechanism.
4303 cdl_package CYGPKG_REDBOOT {
4304 # Packages cannot be added or removed, nor can their version be changed,
4305 # simply by editing their value. Instead the appropriate configuration
4306 # should be used to perform these actions.
4308 # This value cannot be modified here.
4310 # Current value: 1 current
4311 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4312 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4315 # The following properties are affected by this value
4316 # component CYGPKG_REDBOOT_ARM_OPTIONS
4317 # ActiveIf: CYGPKG_REDBOOT
4318 # component CYGPKG_REDBOOT_HAL_OPTIONS
4319 # ActiveIf: CYGPKG_REDBOOT
4320 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4321 # ActiveIf: CYGPKG_REDBOOT
4322 # option CYGSEM_IO_ETH_DRIVERS_WARN
4323 # ActiveIf: CYGPKG_REDBOOT
4327 # Include support for ELF file format
4329 cdl_component CYGSEM_REDBOOT_ELF {
4331 # No user value, uncomment the following line to provide one.
4333 # value_source default
4338 # Use the virtual address in the ELF headers
4339 # The ELF headers contain both a virtual and a physical address
4340 # for where code/data should be loaded. By default the physical
4341 # address is used but sometimes it is necassary to use the
4342 # virtual address because of bugy toolchains
4344 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4346 # No user value, uncomment the following line to provide one.
4348 # value_source default
4353 # Methods of loading images using redboot
4355 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4356 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4357 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4358 # This value cannot be modified here.
4362 # The following properties are affected by this value
4363 # component CYGBLD_BUILD_REDBOOT
4364 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4367 # Build Redboot ROM ELF image
4368 # This option enables the building of the Redboot ELF image.
4369 # The image may require further relocation or symbol
4370 # stripping before being converted to a binary image.
4371 # This is handled by a rule in the target CDL.
4373 cdl_component CYGBLD_BUILD_REDBOOT {
4375 # No user value, uncomment the following line to provide one.
4377 # The inferred value should not be edited directly.
4379 # value_source inferred
4381 # Requires: CYGPKG_INFRA
4382 # CYGPKG_INFRA == current
4384 # Requires: CYGPKG_ISOINFRA
4385 # CYGPKG_ISOINFRA == current
4387 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4388 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4390 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4391 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4393 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4394 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4396 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4397 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4399 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4400 # CYGINT_ISO_STRING_MEMFUNCS == 1
4402 # Requires: CYGINT_ISO_STRING_STRFUNCS
4403 # CYGINT_ISO_STRING_STRFUNCS == 1
4405 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4406 # CYGINT_REDBOOT_LOAD_METHOD == 2
4409 # The following properties are affected by this value
4410 # package CYGPKG_HAL_ARM_TX53KARO
4411 # Requires: CYGBLD_BUILD_REDBOOT == 1
4412 # option CYGBLD_BUILD_REDBOOT_BIN
4413 # ActiveIf: CYGBLD_BUILD_REDBOOT
4417 # Include GDB support in RedBoot
4418 # RedBoot normally includes support for the GDB debugging
4419 # protocols. This option allows this to be disabled which
4420 # may yield a substantial savings in terms of code and memory
4423 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4424 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4425 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4430 # The inferred value should not be edited directly.
4434 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4435 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4437 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4438 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4442 # Threads debugging support
4443 # Enabling this option will include special code in the
4444 # GDB stubs to support debugging of threaded programs. In
4445 # the case of eCos programs, this support allows GDB to
4446 # have complete access to the eCos threads in the
4449 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4450 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4451 # CYG_HAL_STARTUP == ROMRAM
4455 # No user value, uncomment the following line to provide one.
4457 # value_source default
4459 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4460 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4464 # Customized version string
4465 # Use this option to define a customized version "string" for
4466 # RedBoot. Note: this value is only cosmetic, displayed by the
4467 # "version" command, but is useful for providing site specific
4468 # information about the RedBoot configuration.
4470 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4472 # No user value, uncomment the following line to provide one.
4474 # The inferred value should not be edited directly.
4475 inferred_value 1 "Ka-Ro 2010-01-06"
4476 # value_source inferred
4477 # Default value: 0 0
4480 # Enable command line editing
4481 # If this option is non-zero, RedBoot will remember the
4482 # last N command lines. These lines may be reused.
4483 # Enabling this history will also enable rudimentary
4484 # editting of the lines themselves.
4486 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4488 # No user value, uncomment the following line to provide one.
4490 # value_source default
4493 # The following properties are affected by this value
4494 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4495 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4496 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4497 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4500 # Enable command line editing using ANSI arrows, etc
4501 # If this option is enabled, RedBoot will accept standard ANSI key
4502 # sequences for cursor movement (along with the emacs style keys).
4504 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4505 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4506 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4510 # No user value, uncomment the following line to provide one.
4512 # value_source default
4516 # Enable history command and expansion
4517 # Enabling this option will allow RedBoot to provide a
4518 # history command to list previous commands. Also enables
4519 # history expansion via '!' character similar to bash
4522 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4524 # No user value, uncomment the following line to provide one.
4526 # value_source default
4528 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4529 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4533 # Number of unique RAM segments on platform
4534 # Change this option to be the number of memory segments which are
4535 # supported by the platform. If the value is greater than 1, then
4536 # a platform specific function must provide information about the
4537 # additional segments.
4539 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4541 # No user value, uncomment the following line to provide one.
4543 # value_source default
4547 # Include support gzip/zlib decompression
4549 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4550 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4551 # CYGPKG_COMPRESS_ZLIB == current
4555 # No user value, uncomment the following line to provide one.
4557 # value_source default
4560 # The following properties are affected by this value
4561 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4562 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4566 # Size of zlib decompression buffer
4567 # This is the size of the buffer filled with incoming data
4568 # during load before calls are made to the decompressor
4569 # function. For ethernet downloads this can be made bigger
4570 # (at the cost of memory), but for serial downloads on slow
4571 # processors it may be necessary to reduce the size to
4572 # avoid serial overruns. zlib appears to bail out if less
4573 # than five bytes are available initially so this is the
4576 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4578 # No user value, uncomment the following line to provide one.
4580 # value_source default
4582 # Legal values: 5 to 256
4585 # Support compression of Flash images
4586 # This CDL indicates whether flash images can
4587 # be decompressed from gzip/zlib format into RAM.
4589 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4590 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4591 # CYGPKG_REDBOOT_FLASH == 1
4593 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4594 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4595 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4598 # Calculated value: 1
4603 # Include GZIP uncompress command
4604 # Enable this option to include a 'gunzip' command
4605 # to uncompress GZIP compressed data.
4607 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4609 # No user value, uncomment the following line to provide one.
4611 # value_source default
4615 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4616 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4618 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4620 # No user value, uncomment the following line to provide one.
4622 # The inferred value should not be edited directly.
4624 # value_source inferred
4627 # The following properties are affected by this value
4628 # option CYGPRI_REDBOOT_ZLIB_FLASH
4629 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4633 # Include support for xyzModem downloads
4634 # doc: ref/download-command.html
4636 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4638 # No user value, uncomment the following line to provide one.
4640 # value_source default
4643 # The following properties are affected by this value
4644 # option CYGPKG_REDBOOT_CFLAGS_ADD
4645 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4648 # Additional compiler flags
4649 # This option modifies the set of compiler flags for
4650 # building the eCos infra package. These flags are used
4651 # in addition to the set of global flags.
4653 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4654 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4655 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4659 # No user value, uncomment the following line to provide one.
4660 # user_value -Wno-inline
4661 # value_source default
4662 # Default value: -Wno-inline
4665 # Allow the load-command write into Flash.
4666 # Write images direct to Flash via the load command.
4667 # We assume anything which is invalid RAM is flash, hence
4668 # the requires statement
4670 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4671 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4672 # CYGPKG_REDBOOT_FLASH == 1
4676 # No user value, uncomment the following line to provide one.
4678 # value_source default
4680 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4681 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4685 # Include MS Windows CE support
4686 # doc: ref/wince.html
4687 # This option enables MS Windows CE EShell support
4688 # and Windows CE .BIN images support
4690 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4697 # Include support for MXC USB downloads
4699 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4701 # No user value, uncomment the following line to provide one.
4703 # value_source default
4707 # Include support for i.MX USB OTG downloads
4709 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4711 # No user value, uncomment the following line to provide one.
4713 # value_source default
4717 # Include POSIX checksum command
4718 # doc: ref/cksum-command.html
4720 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4722 # No user value, uncomment the following line to provide one.
4724 # value_source default
4728 # Include memory fill command
4729 # doc: ref/mfill-command.html
4731 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4733 # No user value, uncomment the following line to provide one.
4735 # value_source default
4739 # Include memory compare command
4740 # doc: ref/mcmp-command.html
4742 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4744 # No user value, uncomment the following line to provide one.
4746 # value_source default
4750 # Include memory copy command
4751 # doc: ref/mcopy-command.html
4753 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4755 # No user value, uncomment the following line to provide one.
4757 # value_source default
4761 # Include memory dump command
4762 # doc: ref/dump-command.html
4764 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4766 # No user value, uncomment the following line to provide one.
4768 # value_source default
4772 # Include cache command
4773 # doc: ref/cache-command.html
4775 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4777 # No user value, uncomment the following line to provide one.
4779 # value_source default
4783 # Include exec command
4784 # doc: ref/exec-command.html
4786 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4788 # No user value, uncomment the following line to provide one.
4790 # value_source default
4793 # The following properties are affected by this value
4794 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4795 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4798 # Include I/O Memory commands 'iopeek' and 'iopoke'
4800 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4802 # No user value, uncomment the following line to provide one.
4804 # value_source default
4808 # Granularity of timer/ticks
4809 # This option controls the granularity of the timers.
4810 # Faster CPUs can afford higher granularity (lower values)
4811 # which should give higher network performance since the stack
4814 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4816 # No user value, uncomment the following line to provide one.
4818 # value_source default
4819 # Default value: 250
4820 # Legal values: 10 25 50 100 250 500 1000
4823 # Redboot Networking
4824 # This option includes networking support in RedBoot.
4826 cdl_component CYGPKG_REDBOOT_NETWORKING {
4827 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4828 # CYGPKG_IO_ETH_DRIVERS == current
4832 # No user value, uncomment the following line to provide one.
4834 # value_source default
4837 # The following properties are affected by this value
4838 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4839 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4843 # Print net debug information
4844 # This option is overriden by the configuration stored
4847 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4849 # No user value, uncomment the following line to provide one.
4851 # value_source default
4855 # Support TFTP for download
4856 # This option enables the use of the TFTP protocol for
4859 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4861 # No user value, uncomment the following line to provide one.
4863 # value_source default
4867 # Support HTTP for download
4868 # This option enables the use of the HTTP protocol for
4871 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4878 # Default IP address
4879 # This IP address is the default used by RedBoot if
4880 # a BOOTP/DHCP server does not respond. The numbers
4881 # should be separated by *commas*, and not dots. If
4882 # an IP address is configured into the Flash
4883 # configuration, that will be used in preference.
4885 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4887 # No user value, uncomment the following line to provide one.
4889 # value_source default
4890 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4891 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4896 # Do not try to use BOOTP
4897 # By default Redboot tries to use BOOTP to get an IP
4898 # address. If there's no BOOTP server on your network
4899 # use this option to avoid to wait until the
4900 # timeout. This option is overriden by the
4901 # configuration stored in flash.
4903 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4904 # This option is not active
4905 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4908 # No user value, uncomment the following line to provide one.
4910 # value_source default
4914 # Default bootp server
4915 # This IP address is the default server
4916 # address used by RedBoot if a BOOTP/DHCP
4917 # server does not respond. The numbers should
4918 # be separated by *commas*, and not dots. If
4919 # an IP address is configured into the Flash
4920 # configuration, that will be used in
4923 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4924 # This option is not active
4925 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4928 # No user value, uncomment the following line to provide one.
4930 # value_source default
4931 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4932 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4937 # Use DHCP to get IP information
4938 # Use DHCP protocol to obtain pertinent IP addresses, such
4939 # as the client, server, gateway, etc.
4941 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4943 # No user value, uncomment the following line to provide one.
4945 # value_source default
4948 # The following properties are affected by this value
4949 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4950 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4953 # Use a gateway for non-local IP traffic
4954 # Enabling this option will allow the RedBoot networking
4955 # stack to use a [single] gateway to reach a non-local
4956 # IP address. If disabled, RedBoot will only be able to
4957 # reach nodes on the same subnet.
4959 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4961 # No user value, uncomment the following line to provide one.
4963 # value_source default
4965 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4966 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4971 # Default gateway IP address
4972 # This IP address is the default used by RedBoot
4973 # if a BOOTP/DHCP server does not respond. The
4974 # numbers should be separated by *commas*, and
4975 # not dots. If an IP address is configured into
4976 # the Flash configuration, that will be used in
4979 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4981 # No user value, uncomment the following line to provide one.
4983 # value_source default
4984 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4985 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4989 # Default IP address mask
4990 # This IP address mask is the default used by
4991 # RedBoot if a BOOTP/DHCP server does not
4992 # respond. The numbers should be separated by
4993 # *commas*, and not dots. If an IP address is
4994 # configured into the Flash configuration, that
4995 # will be used in preference.
4997 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4999 # No user value, uncomment the following line to provide one.
5001 # value_source default
5002 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5003 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5008 # TCP port to listen for incoming connections
5009 # RedBoot will 'listen' on this port for incoming TCP
5010 # connections. This allows outside connections to be made
5011 # to the platform, either for GDB or RedBoot commands.
5013 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5015 # No user value, uncomment the following line to provide one.
5017 # value_source default
5018 # Default value: 9000
5021 # Number of [network] packet buffers
5022 # RedBoot may need to buffer network data to support
5023 # various connections. This option allows control
5024 # over the number of such buffered packets, and in
5025 # turn, controls the amount of memory used by RedBoot
5026 # (which is not available to user applications).
5027 # Each packet buffer takes up about 1514 bytes.
5028 # Note: there is little need to make this larger than
5031 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5033 # No user value, uncomment the following line to provide one.
5035 # value_source default
5037 # Legal values: 3 to 8
5041 # When this option is enabled, RedBoot will be built with
5042 # support for DNS, allowing use of hostnames on the command
5045 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5046 # This option is not active
5047 # ActiveIf constraint: CYGPKG_NS_DNS
5048 # CYGPKG_NS_DNS (unknown) == 0
5052 # No user value, uncomment the following line to provide one.
5054 # value_source default
5056 # Requires: !CYGPKG_NS_DNS_BUILD
5057 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5063 # This option sets the IP of the default DNS. The IP can be
5064 # changed at runtime as well.
5066 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5067 # This option is not active
5068 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5069 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5070 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5074 # No user value, uncomment the following line to provide one.
5075 # user_value 0.0.0.0
5076 # value_source default
5077 # Default value: 0.0.0.0
5080 # Timeout in DNS lookup
5081 # This option sets the timeout used when looking up an
5082 # address via the DNS. Default is 10 seconds.
5084 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5085 # This option is not active
5086 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5089 # No user value, uncomment the following line to provide one.
5091 # value_source default
5095 # Support the use of a domain name
5096 # This option controls if Redboot supports domain
5097 # names when performing DNS lookups
5099 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5100 # This option is not active
5101 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5104 # No user value, uncomment the following line to provide one.
5106 # value_source default
5111 # Default DNS domain
5112 # This option sets the default DNS domain name.
5113 # This value will be overwritten by the value in
5114 # flash or a domain returned by DHCP
5116 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5117 # This option is not active
5118 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5119 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5122 # No user value, uncomment the following line to provide one.
5124 # value_source default
5125 # Default value: 0 0
5128 # Get DNS domain from Flash
5129 # This option enables getting the domain name
5130 # from the flash configuration. This can later be
5131 # overwritten by a value learnt from DHCP
5133 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5134 # This option is not active
5135 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5136 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5137 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5138 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5142 # No user value, uncomment the following line to provide one.
5144 # value_source default
5148 # Use DNS domain from DHCP
5149 # This option enables the use of the domain name
5152 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5153 # This option is not active
5154 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5155 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5158 # No user value, uncomment the following line to provide one.
5160 # value_source default
5164 # BOOTP/DHCP DNS domain buffer size
5165 # This options sets the size of the static
5166 # buffer used by BOOTP/DHCP to store the DNS
5167 # domain name. The domain name will not be
5168 # set if the buffer is too small to hold it.
5170 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5171 # This option is not active
5172 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5173 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5176 # No user value, uncomment the following line to provide one.
5178 # value_source default
5184 # Default network device driver
5185 # This is the name of the default network device to use.
5187 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5188 # This option is not active
5189 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5190 # CYGHWR_NET_DRIVERS == 1
5194 # No user value, uncomment the following line to provide one.
5196 # value_source default
5197 # Default value: "\"\""
5200 # Initialize only one net device
5201 # This option tells RedBoot to stop initializing network
5202 # devices when it finds the first device which is
5203 # successfully initialized. The default behavior causes
5204 # all network devices to be initialized.
5206 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5207 # This option is not active
5208 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5209 # CYGHWR_NET_DRIVERS == 1
5213 # No user value, uncomment the following line to provide one.
5215 # value_source default
5220 # Let RedBoot use any I/O channel for its console.
5221 # If this option is enabled then RedBoot will attempt to use all
5222 # defined serial I/O channels for its console device. Once input
5223 # arrives at one of these channels then the console will use only
5226 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5228 # No user value, uncomment the following line to provide one.
5230 # The inferred value should not be edited directly.
5232 # value_source inferred
5236 # Let RedBoot adjust the baud rate of the serial console.
5237 # If this option is enabled then RedBoot will support commands
5238 # to set and query the baud rate on the selected console.
5240 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5241 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5242 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5246 # No user value, uncomment the following line to provide one.
5248 # value_source default
5252 # Run a platform specific startup function.
5253 # If this option is enabled then RedBoot will execute a platform
5254 # specific startup function before entering into its command line
5255 # processing. This allows the platform to perform any special
5256 # setups before RedBoot actually starts running. Note: the entire
5257 # RedBoot environment will already be initialized at this point.
5259 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5261 # No user value, uncomment the following line to provide one.
5263 # value_source default
5267 # Run a platform specific ESA validation function.
5268 # If this option is enabled then RedBoot will execute a platform
5269 # specific function to validate an ethernet ESA. This would be
5270 # useful if the address must conform to standards set by the
5271 # hardware manufacturer, etc.
5273 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5275 # No user value, uncomment the following line to provide one.
5277 # The inferred value should not be edited directly.
5279 # value_source inferred
5282 # The following properties are affected by this value
5283 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5284 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5285 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5286 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5289 # Maximum command line length
5290 # This option allows control over how long the CLI command line
5291 # should be. This space will be allocated statically
5292 # rather than from RedBoot's stack.
5294 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5296 # No user value, uncomment the following line to provide one.
5298 # The inferred value should not be edited directly.
5300 # value_source inferred
5301 # Default value: 256
5304 # Command processing idle timeout (ms)
5305 # This option controls the timeout period before the
5306 # command processing is considered 'idle'. Making this
5307 # number smaller will cause idle processing to take place
5308 # more often, etc. The default value of 10ms is a reasonable
5309 # tradeoff between responsiveness and overhead.
5311 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5313 # No user value, uncomment the following line to provide one.
5315 # value_source default
5319 # Validate RAM addresses during load
5320 # This option controls whether or not RedBoot will make
5321 # sure that memory being used by the "load" command is
5322 # in fact in user RAM. Leaving the option enabled makes
5323 # for a safer environment, but this check may not be valid
5324 # on all platforms, thus the ability to disable it.
5325 # ** Disable this only with great care **
5327 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5329 # No user value, uncomment the following line to provide one.
5331 # value_source default
5334 # The following properties are affected by this value
5335 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5336 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5339 # Allow RedBoot to support FLASH programming
5340 # If this option is enabled then RedBoot will provide commands
5341 # to manage images in FLASH memory. These images can be loaded
5342 # into memory for execution or executed in place.
5344 cdl_component CYGPKG_REDBOOT_FLASH {
5345 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5346 # CYGHWR_IO_FLASH_DEVICE == 1
5350 # No user value, uncomment the following line to provide one.
5352 # value_source default
5355 # The following properties are affected by this value
5356 # option CYGPRI_REDBOOT_ZLIB_FLASH
5357 # ActiveIf: CYGPKG_REDBOOT_FLASH
5358 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5359 # ActiveIf: CYGPKG_REDBOOT_FLASH
5363 # Byte order used to store info in flash.
5364 # This option controls the byte ordering used to store
5365 # the FIS directory info and flash config info.
5367 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5369 # No user value, uncomment the following line to provide one.
5370 # user_value NATURAL
5371 # value_source default
5372 # Default value: NATURAL
5373 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5376 # RedBoot Flash Image System support
5377 # doc: ref/flash-image-system.html
5378 # This option enables the Flash Image System commands
5379 # and support within RedBoot. If disabled, simple Flash
5380 # access commands such as "fis write" will still exist.
5381 # This option would be disabled for targets that need simple
5382 # FLASH manipulation, but do not have the need or space for
5383 # complete image management.
5385 cdl_option CYGOPT_REDBOOT_FIS {
5387 # No user value, uncomment the following line to provide one.
5389 # value_source default
5392 # The following properties are affected by this value
5393 # component CYGPKG_REDBOOT_FIS_CONTENTS
5394 # ActiveIf: CYGOPT_REDBOOT_FIS
5395 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5396 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5397 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5398 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5401 # Max number of chunks of free space to manage
5402 # If this option is defined then "fis free" will
5403 # rely on the FIS directory to determine what space is
5404 # free within the FLASH. This option controls the
5405 # maximum number of free segment which can be handled
5406 # (typically this number is small). If this option is
5407 # not enabled, the the archaic behaviour of actually
5408 # scanning the FLASH for erased sectors (unreliable)
5409 # will be used to determine what's free and what's
5412 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5414 # No user value, uncomment the following line to provide one.
5416 # value_source default
5417 # Default value: 1 32
5420 # Flash Image System default directory contents
5422 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5423 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5424 # CYGOPT_REDBOOT_FIS == 1
5427 # Calculated value: 1
5433 # Flash block containing the Directory
5434 # Which block of flash should hold the directory
5435 # information. Positive numbers are absolute block
5436 # numbers. Negative block numbers count backwards
5437 # from the last block. eg 2 means block 2, -2
5438 # means the last but one block.
5440 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5442 # No user value, uncomment the following line to provide one.
5444 # value_source default
5447 # The following properties are affected by this value
5448 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5449 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5450 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5453 # Redundant Flash Image System Directory Support
5454 # This option enables the use of a redundant FIS
5455 # directory within RedBoot. If enabled a flash block
5456 # will be reserved for a second copy of the fis
5457 # directory. Doing this allow for power failure safe
5458 # updates of the directory by the application.
5460 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5462 # No user value, uncomment the following line to provide one.
5464 # value_source default
5466 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5467 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5472 # Flash block containing the backup Directory
5473 # Which block of flash should hold the redundant
5474 # directory information. Positive numbers are
5475 # absolute block numbers. Negative block numbers
5476 # count backwards from the last block. eg 2 means
5477 # block 2, -2 means the last but one block.
5479 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5480 # This option is not active
5481 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5484 # No user value, uncomment the following line to provide one.
5486 # value_source default
5488 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5489 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5490 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5491 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5494 # The following properties are affected by this value
5495 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5496 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5497 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5501 # Pseudo-file to describe reserved area
5502 # If an area of FLASH is reserved, it is informative to
5503 # have a fis entry describing it. This option controls
5504 # creation of such an entry by default in the fis init
5507 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5508 # This option is not active
5509 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5510 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5514 # No user value, uncomment the following line to provide one.
5516 # value_source default
5520 # File to describe RedBoot boot image
5521 # Normally a ROM-startup RedBoot image is first in the
5522 # FLASH, and the system boots using that image. This
5523 # option controls creation of an entry describing it in
5524 # the fis init command. It might be disabled if a
5525 # platform has an immutable boot image of its own, where
5526 # we use a POST-startup RedBoot instead, which performs
5527 # less board initialization.
5529 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5531 # No user value, uncomment the following line to provide one.
5533 # value_source default
5536 # The following properties are affected by this value
5537 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5538 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5539 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5540 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5543 # File to describe RedBoot POST-compatible image
5544 # This option controls creation of an entry describing a
5545 # POST-startup RedBoot image in the fis init command.
5546 # Not all platforms support POST-startup. A platform
5547 # might have both for testing purposes, where the
5548 # eventual user would substitute their own POST code for
5549 # the initial ROM-startup RedBoot, and then jump to the
5550 # POST-compatible RedBoot immediately following.
5552 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5554 # No user value, uncomment the following line to provide one.
5556 # value_source default
5557 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5558 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5563 # Offset of POST image from FLASH start
5564 # This option specifies the offset for a POST image from
5565 # the start of FLASH. If unset, then the fis entry
5566 # describing the POST image will be placed where
5569 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5570 # This option is not active
5571 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5574 # No user value, uncomment the following line to provide one.
5576 # value_source default
5577 # Default value: 0 0
5578 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5579 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5580 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5583 # The following properties are affected by this value
5584 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5585 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5589 # File to describe RedBoot backup image
5590 # This option controls creation of an entry describing a
5591 # backup RedBoot image in the fis init command.
5592 # Conventionally a RAM-startup RedBoot image is kept
5593 # under this name for use in updating the ROM-based
5594 # RedBoot that boots the board.
5596 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5598 # No user value, uncomment the following line to provide one.
5600 # value_source default
5604 # Include ARM SIB ID in FIS
5605 # If set, this option will cause the last 5 words of
5606 # the FIS to include the special ID needed for the
5607 # flash to be recognized as a reserved area for RedBoot
5608 # by an ARM BootRom monitor.
5610 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5612 # No user value, uncomment the following line to provide one.
5614 # value_source default
5618 # Size of FIS directory entry
5619 # The FIS directory is limited to one single flash
5620 # sector. If your flash has tiny sectors, you may wish
5621 # to reduce this value in order to get more slots in
5622 # the FIS directory.
5624 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5626 # No user value, uncomment the following line to provide one.
5628 # value_source default
5629 # Default value: 256
5632 # Number of FIS directory entries
5633 # The FIS directory normally occupies a single flash
5634 # sector. Adjusting this value can allow for more than
5635 # one flash sector to be used, which is useful if your
5636 # sectors are very small.
5638 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5640 # No user value, uncomment the following line to provide one.
5642 # value_source default
5646 # Maximum RedBoot image size
5647 # This option controls the maximum length reserved
5648 # for the RedBoot boot image in the FIS table.
5649 # This should be a multiple of the flash's erase
5652 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5654 # No user value, uncomment the following line to provide one.
5655 # user_value 0x00020000
5656 # The inferred value should not be edited directly.
5657 inferred_value 0x00040000
5658 # value_source inferred
5659 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5660 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5664 # Offset from start of FLASH to RedBoot boot image
5665 # This option controls where the RedBoot boot image is
5666 # located relative to the start of FLASH.
5668 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5670 # No user value, uncomment the following line to provide one.
5672 # value_source default
5673 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5674 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5676 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5677 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5678 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5681 # The following properties are affected by this value
5682 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5683 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5684 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5685 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5686 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5687 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5690 # Size of reserved area at start of FLASH
5691 # This option reserves an area at the start of
5692 # FLASH where RedBoot will never interfere; it is
5693 # expected that this area contains
5694 # (non-RedBoot-based) POST code or some other boot
5695 # monitor that executes before RedBoot.
5697 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5699 # No user value, uncomment the following line to provide one.
5701 # value_source default
5704 # The following properties are affected by this value
5705 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5706 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5707 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5708 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5709 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5710 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5714 # Keep all RedBoot FLASH data blocks locked.
5715 # When this option is enabled, RedBoot will keep configuration
5716 # data and the FIS directory blocks implicitly locked. While
5717 # this is somewhat safer, it does add overhead during updates.
5719 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5720 # This option is not active
5721 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5722 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5726 # No user value, uncomment the following line to provide one.
5728 # value_source default
5732 # Use CRC checksums on FIS images.
5733 # When this option is enabled, RedBoot will use CRC checksums
5734 # when reading and writing flash images.
5736 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5738 # No user value, uncomment the following line to provide one.
5740 # The inferred value should not be edited directly.
5742 # value_source inferred
5746 # ARM FLASH drivers support SIB flash block structure
5747 # This interface is implemented by a flash driver
5748 # to indicate that it supports the ARM SIB flash
5751 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5752 # No options implement this inferface
5753 # ActiveIf constraint: CYGPKG_HAL_ARM
5754 # CYGPKG_HAL_ARM == current
5757 # This value cannot be modified here.
5761 # The following properties are affected by this value
5762 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5763 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5766 # Use ARM SIB flash block structure
5767 # This option is used to interpret ARM Flash System
5768 # information blocks.
5770 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5771 # This option is not active
5772 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5773 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5777 # No user value, uncomment the following line to provide one.
5779 # value_source default
5784 # Keep RedBoot configuration data in FLASH
5785 # When this option is enabled, RedBoot will keep configuration
5786 # data in a separate block of FLASH memory. This data will
5787 # include such items as the node IP address or startup scripts.
5789 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5791 # No user value, uncomment the following line to provide one.
5793 # value_source default
5794 # Default value: CYGPKG_IO_FLASH != 0
5795 # CYGPKG_IO_FLASH == current
5798 # The following properties are affected by this value
5799 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5800 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5801 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5802 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5803 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5804 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5805 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5806 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5807 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5808 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5809 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5810 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5811 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5812 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5816 # Length of configuration data in FLASH
5817 # This option is used to control the amount of memory and FLASH
5818 # to be used for configuration options (persistent storage).
5820 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5822 # No user value, uncomment the following line to provide one.
5824 # value_source default
5825 # Default value: 4096
5828 # Style of media used for persistent data storage
5829 # Persistent data storage can either be held in 'norma' FLASH
5830 # or some other device (represented by the 'EEPROM' choice).
5831 # The different styles utilize different access methods.
5833 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5835 # No user value, uncomment the following line to provide one.
5837 # value_source default
5838 # Default value: FLASH
5839 # Legal values: "FLASH" "EEPROM"
5841 # The following properties are affected by this value
5842 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5843 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5844 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5845 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5848 # Merged config data and FIS directory
5849 # If this option is set, then the FIS directory and FLASH
5850 # configuration database will be stored in the same physical
5853 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5854 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5855 # CYGOPT_REDBOOT_FIS == 1
5856 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5860 # No user value, uncomment the following line to provide one.
5862 # value_source default
5865 # The following properties are affected by this value
5866 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5867 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5870 # Which block of flash to use
5871 # Which block of flash should hold the configuration
5872 # information. Positive numbers are absolute block numbers.
5873 # Negative block numbers count backwards from the last block.
5874 # eg 2 means block 2, -2 means the last but one block.
5876 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5878 # No user value, uncomment the following line to provide one.
5880 # value_source default
5884 # Support simple macros/aliases in FLASH
5885 # This option is used to allow support for simple text-based
5886 # macros (aliases). These aliases are kept in the FLASH
5887 # configuration data (persistent storage).
5889 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5891 # No user value, uncomment the following line to provide one.
5893 # value_source default
5897 # Length of strings in FLASH configuration data
5898 # This option is used to control the amount of memory
5899 # and FLASH to be used for string configuration
5900 # options (persistent storage).
5902 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5904 # No user value, uncomment the following line to provide one.
5906 # value_source default
5907 # Default value: 128
5910 # Length of configuration script(s) in FLASH
5911 # This option is used to control the amount of memory and
5912 # FLASH to be used for configuration options (persistent
5915 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5917 # No user value, uncomment the following line to provide one.
5919 # The inferred value should not be edited directly.
5921 # value_source inferred
5922 # Default value: 512
5925 # Fallback to read-only FLASH configuration
5926 # This option will cause the configuration information to
5927 # revert to the readonly information stored in the FLASH.
5928 # The option only takes effect after
5929 # 1) the config_ok flag has been set to be true,
5930 # indicating that at one time the copy in RAM was valid;
5932 # 2) the information in RAM has been verified to be invalid
5934 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5936 # No user value, uncomment the following line to provide one.
5938 # value_source default
5939 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5940 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5945 # Allow RedBoot to support fileio
5946 # If this option is enabled then RedBoot will provide commands
5947 # to load files from fileio file systems such as JFFS2.
5949 cdl_component CYGPKG_REDBOOT_FILEIO {
5950 # This option is not active
5951 # ActiveIf constraint: CYGPKG_IO_FILEIO
5952 # CYGPKG_IO_FILEIO (unknown) == 0
5956 # No user value, uncomment the following line to provide one.
5958 # value_source default
5961 # The following properties are affected by this value
5962 # option CYGNUM_REDBOOT_GETC_BUFFER
5963 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5967 # Include an ls command
5968 # If this option is enabled a simple ls command will be
5969 # included in redboot so the contents of a directory
5972 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5973 # This option is not active
5974 # The parent CYGPKG_REDBOOT_FILEIO is not active
5977 # No user value, uncomment the following line to provide one.
5979 # value_source default
5984 # Allow RedBoot to support disks
5985 # If this option is enabled then RedBoot will provide commands
5986 # to load disk files.
5988 cdl_component CYGPKG_REDBOOT_DISK {
5996 # Include Redboot commands for disk access
5998 cdl_option CYGSEM_REDBOOT_DISK {
5999 # This option is not active
6000 # The parent CYGPKG_REDBOOT_DISK is disabled
6003 # No user value, uncomment the following line to provide one.
6005 # value_source default
6006 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6007 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6011 # Hardware drivers for disk-type devices
6013 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6014 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6015 # This option is not active
6016 # The parent CYGPKG_REDBOOT_DISK is disabled
6018 # This value cannot be modified here.
6022 # The following properties are affected by this value
6023 # option CYGSEM_REDBOOT_DISK
6024 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6027 # Maximum number of supported disks
6028 # This option controls the number of disks supported by
6031 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6032 # This option is not active
6033 # The parent CYGPKG_REDBOOT_DISK is disabled
6036 # No user value, uncomment the following line to provide one.
6038 # value_source default
6042 # Maximum number of partitions per disk
6043 # This option controls the maximum number of supported
6044 # partitions per disk.
6046 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6047 # This option is not active
6048 # The parent CYGPKG_REDBOOT_DISK is disabled
6051 # No user value, uncomment the following line to provide one.
6053 # value_source default
6057 # Support IDE disks.
6058 # When this option is enabled, RedBoot will support IDE disks.
6060 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6061 # This option is not active
6062 # The parent CYGPKG_REDBOOT_DISK is disabled
6063 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6064 # CYGINT_HAL_PLF_IF_IDE == 0
6068 # No user value, uncomment the following line to provide one.
6070 # value_source default
6075 # Work with VMware virtual disks
6076 # This option controls the disk driver behavior at
6079 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6080 # This option is not active
6081 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6084 # No user value, uncomment the following line to provide one.
6086 # value_source default
6091 # Support Linux second extended filesystems.
6092 # When this option is enabled, RedBoot will support EXT2
6095 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6096 # This option is not active
6097 # The parent CYGPKG_REDBOOT_DISK is disabled
6100 # No user value, uncomment the following line to provide one.
6102 # value_source default
6106 # Support ISO9660 filesystems.
6107 # When this option is enabled, RedBoot will support ISO9660
6110 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6111 # This option is not active
6112 # The parent CYGPKG_REDBOOT_DISK is disabled
6114 # Calculated value: 0
6121 # doc: ref/persistent-state-flash.html
6122 # This contains options related to RedBoot's boot script
6125 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6126 # There is no associated value.
6130 # Boot scripting enabled
6131 # This option controls whether RedBoot boot script
6132 # functionality is enabled.
6134 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6135 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6136 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6137 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6140 # Calculated value: 1
6145 # Use default RedBoot boot script
6146 # If enabled, this option will tell RedBoot to use the
6147 # value of this option as a default boot script.
6149 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6151 # No user value, uncomment the following line to provide one.
6153 # The inferred value should not be edited directly.
6155 # value_source inferred
6156 # Default value: 0 0
6158 # The following properties are affected by this value
6159 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6160 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6163 # Resolution (in ms) for script timeout value.
6164 # This option controls the resolution of the script
6165 # timeout. The value is specified in milliseconds
6166 # (ms), thus to have the script timeout be defined in
6167 # terms of tenths of seconds, use 100.
6169 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6171 # No user value, uncomment the following line to provide one.
6173 # The inferred value should not be edited directly.
6175 # value_source inferred
6176 # Default value: 1000
6179 # Script default timeout value
6180 # This option is used to set the default timeout for startup
6181 # scripts, when they are enabled.
6183 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6185 # No user value, uncomment the following line to provide one.
6187 # The inferred value should not be edited directly.
6189 # value_source inferred
6194 # Support RTC for time & date functions
6195 # When this option is enabled, RedBoot will support commands to
6196 # query and set the real time clock (time and date)
6198 cdl_option CYGSEM_REDBOOT_RTC {
6199 # This option is not active
6200 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6201 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6205 # No user value, uncomment the following line to provide one.
6207 # value_source default
6211 # Behave like a ROM monitor
6212 # Enabling this option will allow RedBoot to provide ROM
6213 # monitor-style services to programs which it executes.
6215 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6216 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6217 # CYG_HAL_STARTUP == ROMRAM
6218 # CYG_HAL_STARTUP == ROMRAM
6221 # Calculated value: 1
6224 # Requires: CYGSEM_HAL_ROM_MONITOR
6225 # CYGSEM_HAL_ROM_MONITOR == 1
6229 # Allow RedBoot to handle GNUPro application 'syscalls'.
6230 # If this option is enabled then RedBoot will install a
6231 # syscall handler to support debugging of applications
6232 # based on GNUPro newlib/bsp.
6234 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6236 # No user value, uncomment the following line to provide one.
6238 # value_source default
6241 # The following properties are affected by this value
6242 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6243 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6244 # option CYGPKG_HAL_GDB_FILEIO
6245 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6249 # Support additional syscalls for 'gprof' profiling
6250 # Support additional syscalls to support a periodic callback
6251 # function for histogram-style profiling, and an enquire/set
6253 # The application must use the GNUPro newlib facilities
6256 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6257 # This option is not active
6258 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6259 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6260 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6264 # No user value, uncomment the following line to provide one.
6266 # value_source default
6270 # Does the HAL support 'gprof' profiling?
6272 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6273 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6274 # This option is not active
6275 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6277 # This value cannot be modified here.
6281 # The following properties are affected by this value
6282 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6283 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6286 # Do not raise SIGTRAP when program exits
6287 # For some (single shot) newlib based programs,
6288 # exiting and returning a termination status may be
6289 # the normal expected behavior.
6291 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6292 # This option is not active
6293 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6296 # No user value, uncomment the following line to provide one.
6298 # value_source default
6303 # Use a common buffer for Zlib and FIS
6304 # Use a common memory buffer for both the zlib workspace
6305 # and FIS directory operations. This can save a substantial
6306 # amount of RAM, especially when flash sectors are large.
6308 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6309 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6310 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6311 # CYGOPT_REDBOOT_FIS == 1
6315 # No user value, uncomment the following line to provide one.
6317 # value_source default
6322 # Size of Zlib/FIS common buffer
6323 # Size of common buffer to allocate. Must be at least the
6324 # size of one flash sector.
6326 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6327 # This option is not active
6328 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6331 # No user value, uncomment the following line to provide one.
6332 # user_value 0x0000C000
6333 # value_source default
6334 # Default value: 0x0000C000
6335 # Legal values: 0x4000 to 0x80000000
6339 # Buffer size in getc when loading images
6340 # When loading images a buffer is used between redboot and the
6341 # underlying storage medium, eg a filesystem, or a socket etc.
6342 # The size of this buffer can have a big impart on load speed.
6344 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6346 # No user value, uncomment the following line to provide one.
6348 # value_source default
6349 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6350 # CYGPKG_REDBOOT_FILEIO == 0
6355 # Redboot for ARM options
6356 # This option lists the target's requirements for a valid Redboot
6359 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6360 # ActiveIf constraint: CYGPKG_REDBOOT
6361 # CYGPKG_REDBOOT == current
6364 # There is no associated value.
6366 # The following properties are affected by this value
6370 # Provide the exec command in RedBoot
6371 # This option contains requirements for booting linux
6372 # from RedBoot. The component is enabled/disabled from
6375 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6376 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6377 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6380 # There is no associated value.
6384 # Enable -x switch for exec command.
6385 # This option allows bi-endian platforms to launch kernels
6386 # built for an endianess different than the RedBoot endianess
6388 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6390 # No user value, uncomment the following line to provide one.
6392 # value_source default
6396 # Physical base address of linux kernel
6397 # This is the physical address of the base of the
6398 # Linux kernel image.
6400 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6402 # No user value, uncomment the following line to provide one.
6403 # user_value 0x70108000
6404 # value_source default
6405 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6406 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6410 # Default physical base address of linux kernel
6411 # This is the physical address of the base of the
6412 # Linux kernel image. This option gets set by the
6415 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6417 # No user value, uncomment the following line to provide one.
6418 # user_value 0x00008000
6419 # The inferred value should not be edited directly.
6420 inferred_value 0x70108000
6421 # value_source inferred
6422 # Default value: 0x00008000
6424 # The following properties are affected by this value
6425 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6426 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6427 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6428 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6431 # Base address of linux kernel parameter tags
6432 # This is the base address of the area of memory used to
6433 # pass parameters to the Linux kernel. This should be chosen
6434 # to avoid overlap with the kernel and any ramdisk image.
6436 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6438 # No user value, uncomment the following line to provide one.
6439 # user_value 0x00000100
6440 # value_source default
6441 # Default value: 0x00000100
6446 # Redboot HAL options
6447 # This option lists the target's requirements for a valid Redboot
6450 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6451 # ActiveIf constraint: CYGPKG_REDBOOT
6452 # CYGPKG_REDBOOT == current
6455 # There is no associated value.
6459 # Build Redboot ROM binary image
6460 # This option enables the conversion of the Redboot ELF
6461 # image to a binary image suitable for ROM programming.
6463 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6464 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6465 # CYGBLD_BUILD_REDBOOT == 1
6469 # No user value, uncomment the following line to provide one.
6471 # value_source default
6476 # Redboot HAL variant options
6478 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6479 # ActiveIf constraint: CYGPKG_REDBOOT
6480 # CYGPKG_REDBOOT == current
6483 # There is no associated value.
6484 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6485 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6490 # ISO C and POSIX infrastructure
6491 # eCos supports implementations of ISO C libraries and POSIX
6492 # implementations. This package provides infrastructure used by
6493 # all such implementations.
6495 cdl_package CYGPKG_ISOINFRA {
6496 # Packages cannot be added or removed, nor can their version be changed,
6497 # simply by editing their value. Instead the appropriate configuration
6498 # should be used to perform these actions.
6500 # This value cannot be modified here.
6502 # Current value: 1 current
6504 # The following properties are affected by this value
6505 # component CYGBLD_BUILD_REDBOOT
6506 # Requires: CYGPKG_ISOINFRA
6507 # package CYGPKG_LIBC_STRING
6508 # Requires: CYGPKG_ISOINFRA
6509 # package CYGPKG_COMPRESS_ZLIB
6510 # Requires: CYGPKG_ISOINFRA
6511 # package CYGPKG_IO_FLASH
6512 # Requires: CYGPKG_ISOINFRA
6513 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6514 # Requires: CYGPKG_ISOINFRA
6515 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6516 # DefaultValue: 0 != CYGPKG_ISOINFRA
6517 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6518 # ActiveIf: CYGPKG_ISOINFRA
6519 # package CYGPKG_LIBC_I18N
6520 # Requires: CYGPKG_ISOINFRA
6521 # package CYGPKG_LIBC_STDLIB
6522 # Requires: CYGPKG_ISOINFRA
6526 # Startup and termination
6528 cdl_component CYGPKG_ISO_STARTUP {
6529 # There is no associated value.
6533 # main() startup implementations
6534 # Implementations of this interface arrange for a user-supplied
6535 # main() to be called in an ISO compatible environment.
6537 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6538 # No options implement this inferface
6539 # This value cannot be modified here.
6542 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6543 # CYGINT_ISO_MAIN_STARTUP == 0
6546 # The following properties are affected by this value
6547 # interface CYGINT_ISO_MAIN_STARTUP
6548 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6551 # environ implementations
6552 # Implementations of this interface provide the environ
6553 # variable required by POSIX.
6555 cdl_interface CYGINT_ISO_ENVIRON {
6556 # No options implement this inferface
6557 # This value cannot be modified here.
6560 # Requires: 1 >= CYGINT_ISO_ENVIRON
6561 # CYGINT_ISO_ENVIRON == 0
6564 # The following properties are affected by this value
6565 # interface CYGINT_ISO_ENVIRON
6566 # Requires: 1 >= CYGINT_ISO_ENVIRON
6572 cdl_component CYGPKG_ISO_CTYPE_H {
6573 # There is no associated value.
6577 # Number of implementations of ctype functions
6579 cdl_interface CYGINT_ISO_CTYPE {
6580 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6581 # This value cannot be modified here.
6584 # Requires: 1 >= CYGINT_ISO_CTYPE
6585 # CYGINT_ISO_CTYPE == 1
6588 # The following properties are affected by this value
6589 # interface CYGINT_ISO_CTYPE
6590 # Requires: 1 >= CYGINT_ISO_CTYPE
6591 # package CYGPKG_HAL_ARM_TX53KARO
6592 # Requires: CYGINT_ISO_CTYPE
6593 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6594 # Requires: CYGINT_ISO_CTYPE
6595 # package CYGPKG_LIBC_STDLIB
6596 # Requires: CYGINT_ISO_CTYPE
6599 # Ctype implementation header
6601 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6603 # No user value, uncomment the following line to provide one.
6605 # The inferred value should not be edited directly.
6606 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6607 # value_source inferred
6608 # Default value: 0 0
6610 # The following properties are affected by this value
6611 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6612 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6613 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6614 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6620 cdl_component CYGPKG_ISO_ERRNO {
6621 # There is no associated value.
6625 # Number of implementations of error codes
6627 cdl_interface CYGINT_ISO_ERRNO_CODES {
6628 # Implemented by CYGPKG_ERROR, active, enabled
6629 # This value cannot be modified here.
6632 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6633 # CYGINT_ISO_ERRNO_CODES == 1
6636 # The following properties are affected by this value
6637 # interface CYGINT_ISO_ERRNO_CODES
6638 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6641 # Error codes implementation header
6643 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6645 # No user value, uncomment the following line to provide one.
6647 # The inferred value should not be edited directly.
6648 inferred_value 1 <cyg/error/codes.h>
6649 # value_source inferred
6650 # Default value: 0 0
6652 # The following properties are affected by this value
6653 # package CYGPKG_ERROR
6654 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6657 # Number of implementations of errno variable
6659 cdl_interface CYGINT_ISO_ERRNO {
6660 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6661 # This value cannot be modified here.
6664 # Requires: 1 >= CYGINT_ISO_ERRNO
6665 # CYGINT_ISO_ERRNO == 1
6668 # The following properties are affected by this value
6669 # interface CYGINT_ISO_ERRNO
6670 # Requires: 1 >= CYGINT_ISO_ERRNO
6673 # errno variable implementation header
6675 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6677 # No user value, uncomment the following line to provide one.
6679 # The inferred value should not be edited directly.
6680 inferred_value 1 <cyg/error/errno.h>
6681 # value_source inferred
6682 # Default value: 0 0
6684 # The following properties are affected by this value
6685 # component CYGPKG_ERROR_ERRNO
6686 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6690 # Locale-related functions
6692 cdl_component CYGPKG_ISO_LOCALE {
6693 # There is no associated value.
6697 # Number of implementations of locale functions
6699 cdl_interface CYGINT_ISO_LOCALE {
6700 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6701 # This value cannot be modified here.
6704 # Requires: 1 >= CYGINT_ISO_LOCALE
6705 # CYGINT_ISO_LOCALE == 1
6708 # The following properties are affected by this value
6709 # interface CYGINT_ISO_LOCALE
6710 # Requires: 1 >= CYGINT_ISO_LOCALE
6713 # Locale implementation header
6715 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6717 # No user value, uncomment the following line to provide one.
6719 # value_source default
6720 # Default value: 0 0
6724 # Standard I/O-related functionality
6726 cdl_component CYGPKG_ISO_STDIO {
6727 # There is no associated value.
6731 # Number of implementations of stdio file types
6733 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6734 # No options implement this inferface
6735 # This value cannot be modified here.
6737 # Current value: 0 0
6738 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6739 # CYGINT_ISO_STDIO_FILETYPES == 0
6742 # The following properties are affected by this value
6743 # interface CYGINT_ISO_STDIO_FILETYPES
6744 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6747 # Stdio file types implementation header
6749 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6751 # No user value, uncomment the following line to provide one.
6753 # value_source default
6754 # Default value: 0 0
6757 # Stdio standard streams implementations
6759 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6760 # No options implement this inferface
6761 # This value cannot be modified here.
6763 # Current value: 0 0
6764 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6765 # CYGINT_ISO_STDIO_STREAMS == 0
6768 # The following properties are affected by this value
6769 # interface CYGINT_ISO_STDIO_STREAMS
6770 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6773 # Stdio standard streams implementation header
6774 # This header file must define stdin, stdout
6777 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6779 # No user value, uncomment the following line to provide one.
6781 # value_source default
6782 # Default value: 0 0
6785 # Number of implementations of stdio file operations
6787 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6788 # No options implement this inferface
6789 # This value cannot be modified here.
6791 # Current value: 0 0
6792 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6793 # CYGINT_ISO_STDIO_FILEOPS == 0
6796 # The following properties are affected by this value
6797 # interface CYGINT_ISO_STDIO_FILEOPS
6798 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6801 # Stdio file operations implementation header
6802 # This header controls the file system operations on a file
6803 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6806 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6808 # No user value, uncomment the following line to provide one.
6810 # value_source default
6811 # Default value: 0 0
6814 # Number of implementations of stdio file access functionals
6816 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6817 # No options implement this inferface
6818 # This value cannot be modified here.
6820 # Current value: 0 0
6821 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6822 # CYGINT_ISO_STDIO_FILEACCESS == 0
6825 # The following properties are affected by this value
6826 # interface CYGINT_ISO_STDIO_FILEACCESS
6827 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6828 # option CYGFUN_COMPRESS_ZLIB_GZIO
6829 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6832 # Stdio file access implementation header
6833 # This header controls the file access operations
6834 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6835 # setvbuf(), and associated constants.
6837 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6839 # No user value, uncomment the following line to provide one.
6841 # value_source default
6842 # Default value: 0 0
6845 # Number of implementations of stdio formatted I/O
6847 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6848 # No options implement this inferface
6849 # This value cannot be modified here.
6851 # Current value: 0 0
6852 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6853 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6856 # The following properties are affected by this value
6857 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6858 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6859 # option CYGFUN_COMPRESS_ZLIB_GZIO
6860 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6863 # Stdio formatted I/O implementation header
6865 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6867 # No user value, uncomment the following line to provide one.
6869 # value_source default
6870 # Default value: 0 0
6873 # Number of implementations of stdio character I/O
6875 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6876 # No options implement this inferface
6877 # This value cannot be modified here.
6879 # Current value: 0 0
6880 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6881 # CYGINT_ISO_STDIO_CHAR_IO == 0
6884 # The following properties are affected by this value
6885 # interface CYGINT_ISO_STDIO_CHAR_IO
6886 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6889 # Stdio character I/O implementation header
6891 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6893 # No user value, uncomment the following line to provide one.
6895 # value_source default
6896 # Default value: 0 0
6899 # Number of implementations of stdio direct I/O
6901 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6902 # No options implement this inferface
6903 # This value cannot be modified here.
6905 # Current value: 0 0
6906 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6907 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6910 # The following properties are affected by this value
6911 # interface CYGINT_ISO_STDIO_DIRECT_IO
6912 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6915 # Stdio direct I/O implementation header
6917 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6919 # No user value, uncomment the following line to provide one.
6921 # value_source default
6922 # Default value: 0 0
6925 # Number of implementations of stdio file positioning
6927 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6928 # No options implement this inferface
6929 # This value cannot be modified here.
6931 # Current value: 0 0
6932 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6933 # CYGINT_ISO_STDIO_FILEPOS == 0
6936 # The following properties are affected by this value
6937 # interface CYGINT_ISO_STDIO_FILEPOS
6938 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6939 # option CYGFUN_COMPRESS_ZLIB_GZIO
6940 # Requires: CYGINT_ISO_STDIO_FILEPOS
6943 # Stdio file positioning implementation header
6945 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6947 # No user value, uncomment the following line to provide one.
6949 # value_source default
6950 # Default value: 0 0
6953 # Number of implementations of stdio error handling
6955 cdl_interface CYGINT_ISO_STDIO_ERROR {
6956 # No options implement this inferface
6957 # This value cannot be modified here.
6959 # Current value: 0 0
6960 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6961 # CYGINT_ISO_STDIO_ERROR == 0
6964 # The following properties are affected by this value
6965 # interface CYGINT_ISO_STDIO_ERROR
6966 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6969 # Stdio error handling implementation header
6971 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6973 # No user value, uncomment the following line to provide one.
6975 # value_source default
6976 # Default value: 0 0
6979 # POSIX fd-related function implementations
6981 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6982 # No options implement this inferface
6983 # This value cannot be modified here.
6985 # Current value: 0 0
6986 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6987 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6990 # The following properties are affected by this value
6991 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6992 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6995 # POSIX fd-related function implementation header
6997 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6999 # No user value, uncomment the following line to provide one.
7001 # value_source default
7002 # Default value: 0 0
7006 # Standard general utility functions
7008 cdl_component CYGPKG_ISO_STDLIB {
7009 # There is no associated value.
7013 # String conversion function implementations
7015 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7016 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7017 # This value cannot be modified here.
7020 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7021 # CYGINT_ISO_STDLIB_STRCONV == 1
7024 # The following properties are affected by this value
7025 # interface CYGINT_ISO_STDLIB_STRCONV
7026 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7029 # String conversion function implementation header
7031 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7033 # No user value, uncomment the following line to provide one.
7035 # The inferred value should not be edited directly.
7036 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7037 # value_source inferred
7038 # Default value: 0 0
7040 # The following properties are affected by this value
7041 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7042 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7045 # String to FP conversion function implementations
7047 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7048 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7049 # This value cannot be modified here.
7052 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7053 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7056 # The following properties are affected by this value
7057 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7058 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7061 # String to FP conversion function implementation header
7063 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7065 # No user value, uncomment the following line to provide one.
7067 # value_source default
7068 # Default value: 0 0
7071 # Random number generator implementations
7073 cdl_interface CYGINT_ISO_RAND {
7074 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7075 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7076 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7077 # This value cannot be modified here.
7080 # Requires: 1 >= CYGINT_ISO_RAND
7081 # CYGINT_ISO_RAND == 1
7084 # The following properties are affected by this value
7085 # interface CYGINT_ISO_RAND
7086 # Requires: 1 >= CYGINT_ISO_RAND
7089 # Random number generator implementation header
7091 cdl_option CYGBLD_ISO_RAND_HEADER {
7093 # No user value, uncomment the following line to provide one.
7095 # value_source default
7096 # Default value: 0 0
7099 # Malloc implementations
7101 cdl_interface CYGINT_ISO_MALLOC {
7102 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7103 # This value cannot be modified here.
7106 # Requires: 1 >= CYGINT_ISO_MALLOC
7107 # CYGINT_ISO_MALLOC == 1
7110 # The following properties are affected by this value
7111 # interface CYGINT_ISO_MALLOC
7112 # Requires: 1 >= CYGINT_ISO_MALLOC
7113 # option CYGFUN_LIBC_STRING_STRDUP
7114 # ActiveIf: CYGINT_ISO_MALLOC
7117 # Malloc implementation header
7119 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7121 # No user value, uncomment the following line to provide one.
7123 # value_source default
7124 # Default value: 0 0
7127 # Mallinfo() implementations
7129 cdl_interface CYGINT_ISO_MALLINFO {
7130 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7131 # This value cannot be modified here.
7134 # Requires: 1 >= CYGINT_ISO_MALLINFO
7135 # CYGINT_ISO_MALLINFO == 1
7138 # The following properties are affected by this value
7139 # interface CYGINT_ISO_MALLINFO
7140 # Requires: 1 >= CYGINT_ISO_MALLINFO
7143 # Mallinfo() implementation header
7145 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7147 # No user value, uncomment the following line to provide one.
7149 # value_source default
7150 # Default value: 0 0
7153 # Program exit functionality implementations
7155 cdl_interface CYGINT_ISO_EXIT {
7156 # No options implement this inferface
7157 # This value cannot be modified here.
7160 # Requires: 1 >= CYGINT_ISO_EXIT
7161 # CYGINT_ISO_EXIT == 0
7164 # The following properties are affected by this value
7165 # interface CYGINT_ISO_EXIT
7166 # Requires: 1 >= CYGINT_ISO_EXIT
7167 # option CYGFUN_INFRA_DUMMY_ABORT
7168 # Requires: !CYGINT_ISO_EXIT
7169 # option CYGFUN_INFRA_DUMMY_ABORT
7170 # DefaultValue: CYGINT_ISO_EXIT == 0
7173 # Program exit functionality implementation header
7175 cdl_option CYGBLD_ISO_EXIT_HEADER {
7177 # No user value, uncomment the following line to provide one.
7179 # value_source default
7180 # Default value: 0 0
7183 # Program environment implementations
7185 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7186 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7187 # This value cannot be modified here.
7190 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7191 # CYGINT_ISO_STDLIB_ENVIRON == 1
7194 # The following properties are affected by this value
7195 # interface CYGINT_ISO_STDLIB_ENVIRON
7196 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7199 # Program environment implementation header
7201 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7203 # No user value, uncomment the following line to provide one.
7205 # value_source default
7206 # Default value: 0 0
7209 # system() implementations
7211 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7212 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7213 # This value cannot be modified here.
7216 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7217 # CYGINT_ISO_STDLIB_SYSTEM == 1
7220 # The following properties are affected by this value
7221 # interface CYGINT_ISO_STDLIB_SYSTEM
7222 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7225 # system() implementation header
7227 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7229 # No user value, uncomment the following line to provide one.
7231 # value_source default
7232 # Default value: 0 0
7235 # bsearch() implementations
7237 cdl_interface CYGINT_ISO_BSEARCH {
7238 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7239 # This value cannot be modified here.
7242 # Requires: 1 >= CYGINT_ISO_BSEARCH
7243 # CYGINT_ISO_BSEARCH == 1
7246 # The following properties are affected by this value
7247 # interface CYGINT_ISO_BSEARCH
7248 # Requires: 1 >= CYGINT_ISO_BSEARCH
7251 # bsearch() implementation header
7253 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7255 # No user value, uncomment the following line to provide one.
7257 # value_source default
7258 # Default value: 0 0
7261 # qsort() implementations
7263 cdl_interface CYGINT_ISO_QSORT {
7264 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7265 # This value cannot be modified here.
7268 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7269 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7272 # The following properties are affected by this value
7275 # qsort() implementation header
7277 cdl_option CYGBLD_ISO_QSORT_HEADER {
7279 # No user value, uncomment the following line to provide one.
7281 # value_source default
7282 # Default value: 0 0
7285 # abs()/labs() implementations
7287 cdl_interface CYGINT_ISO_ABS {
7288 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7289 # This value cannot be modified here.
7292 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7293 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7296 # The following properties are affected by this value
7299 # abs()/labs() implementation header
7301 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7303 # No user value, uncomment the following line to provide one.
7305 # The inferred value should not be edited directly.
7306 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7307 # value_source inferred
7308 # Default value: 0 0
7310 # The following properties are affected by this value
7311 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7312 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7315 # div()/ldiv() implementations
7317 cdl_interface CYGINT_ISO_DIV {
7318 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7319 # This value cannot be modified here.
7322 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7323 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7326 # The following properties are affected by this value
7329 # div()/ldiv() implementation header
7331 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7333 # No user value, uncomment the following line to provide one.
7335 # The inferred value should not be edited directly.
7336 inferred_value 1 <cyg/libc/stdlib/div.inl>
7337 # value_source inferred
7338 # Default value: 0 0
7340 # The following properties are affected by this value
7341 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7342 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7345 # Header defining the implementation's MB_CUR_MAX
7347 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7349 # No user value, uncomment the following line to provide one.
7351 # value_source default
7352 # Default value: 0 0
7354 # The following properties are affected by this value
7355 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7356 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7359 # Multibyte character implementations
7361 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7362 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7363 # This value cannot be modified here.
7366 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7367 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7370 # The following properties are affected by this value
7371 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7372 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7375 # Multibyte character implementation header
7377 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7379 # No user value, uncomment the following line to provide one.
7381 # value_source default
7382 # Default value: 0 0
7388 cdl_component CYGPKG_ISO_STRING {
7389 # There is no associated value.
7393 # Number of implementations of strerror() function
7395 cdl_interface CYGINT_ISO_STRERROR {
7396 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7397 # This value cannot be modified here.
7399 # Current value: 1 1
7400 # Requires: 1 >= CYGINT_ISO_STRERROR
7401 # CYGINT_ISO_STRERROR == 1
7404 # The following properties are affected by this value
7405 # interface CYGINT_ISO_STRERROR
7406 # Requires: 1 >= CYGINT_ISO_STRERROR
7409 # strerror() implementation header
7411 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7413 # No user value, uncomment the following line to provide one.
7415 # The inferred value should not be edited directly.
7416 inferred_value 1 <cyg/error/strerror.h>
7417 # value_source inferred
7418 # Default value: 0 0
7420 # The following properties are affected by this value
7421 # option CYGPKG_ERROR_STRERROR
7422 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7425 # memcpy() implementation header
7427 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7429 # No user value, uncomment the following line to provide one.
7431 # value_source default
7432 # Default value: 0 0
7435 # memset() implementation header
7437 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7439 # No user value, uncomment the following line to provide one.
7441 # value_source default
7442 # Default value: 0 0
7445 # Number of implementations of strtok_r() function
7447 cdl_interface CYGINT_ISO_STRTOK_R {
7448 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7449 # This value cannot be modified here.
7451 # Current value: 1 1
7452 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7453 # CYGINT_ISO_STRTOK_R == 1
7456 # The following properties are affected by this value
7457 # interface CYGINT_ISO_STRTOK_R
7458 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7461 # strtok_r() implementation header
7463 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7465 # No user value, uncomment the following line to provide one.
7467 # The inferred value should not be edited directly.
7468 inferred_value 1 <cyg/libc/string/string.h>
7469 # value_source inferred
7470 # Default value: 0 0
7472 # The following properties are affected by this value
7473 # package CYGPKG_LIBC_STRING
7474 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7477 # Number of implementations of locale-specific string functions
7478 # This covers locale-dependent string functions such as strcoll()
7481 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7482 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7483 # This value cannot be modified here.
7485 # Current value: 1 1
7486 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7487 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7490 # The following properties are affected by this value
7491 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7492 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7495 # Locale-specific string functions' implementation header
7496 # This covers locale-dependent string functions such as strcoll()
7499 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7501 # No user value, uncomment the following line to provide one.
7503 # The inferred value should not be edited directly.
7504 inferred_value 1 <cyg/libc/string/string.h>
7505 # value_source inferred
7506 # Default value: 0 0
7508 # The following properties are affected by this value
7509 # package CYGPKG_LIBC_STRING
7510 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7513 # Number of implementations of BSD string functions
7515 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7516 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7517 # This value cannot be modified here.
7519 # Current value: 0 0
7520 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7521 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7524 # The following properties are affected by this value
7525 # interface CYGINT_ISO_STRING_BSD_FUNCS
7526 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7529 # BSD string functions' implementation header
7531 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7533 # No user value, uncomment the following line to provide one.
7535 # The inferred value should not be edited directly.
7536 inferred_value 1 <cyg/libc/string/bsdstring.h>
7537 # value_source inferred
7538 # Default value: 0 0
7540 # The following properties are affected by this value
7541 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7542 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7545 # Number of implementations of other mem*() functions
7547 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7548 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7549 # This value cannot be modified here.
7551 # Current value: 1 1
7552 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7553 # CYGINT_ISO_STRING_MEMFUNCS == 1
7556 # The following properties are affected by this value
7557 # interface CYGINT_ISO_STRING_MEMFUNCS
7558 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7559 # component CYGBLD_BUILD_REDBOOT
7560 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7561 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7562 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7565 # Other mem*() functions' implementation header
7567 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7569 # No user value, uncomment the following line to provide one.
7571 # The inferred value should not be edited directly.
7572 inferred_value 1 <cyg/libc/string/string.h>
7573 # value_source inferred
7574 # Default value: 0 0
7576 # The following properties are affected by this value
7577 # package CYGPKG_LIBC_STRING
7578 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7581 # Number of implementations of other ISO C str*() functions
7582 # This covers the other str*() functions defined by ISO C.
7584 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7585 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7586 # This value cannot be modified here.
7588 # Current value: 1 1
7589 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7590 # CYGINT_ISO_STRING_STRFUNCS == 1
7593 # The following properties are affected by this value
7594 # interface CYGINT_ISO_STRING_STRFUNCS
7595 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7596 # option CYGFUN_INFRA_DUMMY_STRLEN
7597 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7598 # option CYGFUN_INFRA_DUMMY_STRLEN
7599 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7600 # component CYGBLD_BUILD_REDBOOT
7601 # Requires: CYGINT_ISO_STRING_STRFUNCS
7602 # component CYGPKG_IO_ETH_DRIVERS_NET
7603 # Requires: CYGINT_ISO_STRING_STRFUNCS
7604 # option CYGFUN_COMPRESS_ZLIB_GZIO
7605 # Requires: CYGINT_ISO_STRING_STRFUNCS
7606 # package CYGPKG_IO_FLASH
7607 # Requires: CYGINT_ISO_STRING_STRFUNCS
7608 # package CYGPKG_LIBC_STDLIB
7609 # Requires: CYGINT_ISO_STRING_STRFUNCS
7612 # Other ISO C str*() functions' implementation header
7613 # This covers the other str*() functions defined by ISO C.
7615 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7617 # No user value, uncomment the following line to provide one.
7619 # The inferred value should not be edited directly.
7620 inferred_value 1 <cyg/libc/string/string.h>
7621 # value_source inferred
7622 # Default value: 0 0
7624 # The following properties are affected by this value
7625 # package CYGPKG_LIBC_STRING
7626 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7630 # Clock and time functionality
7632 cdl_component CYGPKG_ISO_TIME {
7633 # There is no associated value.
7637 # time_t implementation header
7639 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7641 # No user value, uncomment the following line to provide one.
7643 # value_source default
7644 # Default value: 0 0
7647 # clock_t implementation header
7649 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7651 # No user value, uncomment the following line to provide one.
7653 # value_source default
7654 # Default value: 0 0
7657 # struct timeval implementation header
7659 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7661 # No user value, uncomment the following line to provide one.
7663 # value_source default
7664 # Default value: 0 0
7667 # fnmatch implementation header
7669 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7671 # No user value, uncomment the following line to provide one.
7673 # value_source default
7674 # Default value: 0 0
7677 # Number of implementations of POSIX timer types
7679 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7680 # No options implement this inferface
7681 # This value cannot be modified here.
7683 # Current value: 0 0
7684 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7685 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7688 # The following properties are affected by this value
7689 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7690 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7693 # POSIX timer types implementation header
7695 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7697 # No user value, uncomment the following line to provide one.
7699 # value_source default
7700 # Default value: 0 0
7703 # Number of implementations of POSIX clock types
7705 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7706 # No options implement this inferface
7707 # This value cannot be modified here.
7709 # Current value: 0 0
7710 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7711 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7714 # The following properties are affected by this value
7715 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7716 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7719 # POSIX clock types implementation header
7721 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7723 # No user value, uncomment the following line to provide one.
7725 # value_source default
7726 # Default value: 0 0
7729 # Number of implementations of ISO C types
7731 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7732 # No options implement this inferface
7733 # This value cannot be modified here.
7735 # Current value: 0 0
7736 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7737 # CYGINT_ISO_C_TIME_TYPES == 0
7740 # The following properties are affected by this value
7741 # interface CYGINT_ISO_C_TIME_TYPES
7742 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7745 # ISO C time types implementation header
7747 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7749 # No user value, uncomment the following line to provide one.
7751 # value_source default
7752 # Default value: 0 0
7755 # Number of implementations of POSIX timers
7757 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7758 # No options implement this inferface
7759 # This value cannot be modified here.
7761 # Current value: 0 0
7762 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7763 # CYGINT_ISO_POSIX_TIMERS == 0
7766 # The following properties are affected by this value
7767 # interface CYGINT_ISO_POSIX_TIMERS
7768 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7771 # POSIX timer implementation header
7773 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7775 # No user value, uncomment the following line to provide one.
7777 # value_source default
7778 # Default value: 0 0
7781 # Number of implementations of POSIX clocks
7783 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7784 # No options implement this inferface
7785 # This value cannot be modified here.
7787 # Current value: 0 0
7788 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7789 # CYGINT_ISO_POSIX_CLOCKS == 0
7792 # The following properties are affected by this value
7793 # interface CYGINT_ISO_POSIX_CLOCKS
7794 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7797 # POSIX clocks implementation header
7799 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7801 # No user value, uncomment the following line to provide one.
7803 # value_source default
7804 # Default value: 0 0
7807 # Number of implementations of ISO C clock functions
7809 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7810 # No options implement this inferface
7811 # This value cannot be modified here.
7813 # Current value: 0 0
7814 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7815 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7818 # The following properties are affected by this value
7819 # interface CYGINT_ISO_C_CLOCK_FUNCS
7820 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7823 # ISO C clock functions' implementation header
7825 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7827 # No user value, uncomment the following line to provide one.
7829 # value_source default
7830 # Default value: 0 0
7833 # Number of implementations of tzset() function
7835 cdl_interface CYGINT_ISO_TZSET {
7836 # No options implement this inferface
7837 # This value cannot be modified here.
7839 # Current value: 0 0
7840 # Requires: 1 >= CYGINT_ISO_TZSET
7841 # CYGINT_ISO_TZSET == 0
7844 # The following properties are affected by this value
7845 # interface CYGINT_ISO_TZSET
7846 # Requires: 1 >= CYGINT_ISO_TZSET
7849 # tzset() implementation header
7851 cdl_option CYGBLD_ISO_TZSET_HEADER {
7853 # No user value, uncomment the following line to provide one.
7855 # value_source default
7856 # Default value: 0 0
7860 # Signal functionality
7862 cdl_component CYGPKG_ISO_SIGNAL {
7863 # There is no associated value.
7867 # Number of implementations of signal numbers
7869 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7870 # No options implement this inferface
7871 # This value cannot be modified here.
7874 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7875 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7878 # The following properties are affected by this value
7879 # interface CYGINT_ISO_SIGNAL_NUMBERS
7880 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7883 # Signal numbering implementation header
7884 # This header provides the mapping of signal
7885 # names (e.g. SIGBUS) to numbers.
7887 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7889 # No user value, uncomment the following line to provide one.
7891 # value_source default
7892 # Default value: 0 0
7895 # Number of signal implementations
7897 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7898 # No options implement this inferface
7899 # This value cannot be modified here.
7902 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7903 # CYGINT_ISO_SIGNAL_IMPL == 0
7906 # The following properties are affected by this value
7907 # interface CYGINT_ISO_SIGNAL_IMPL
7908 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7911 # Signals implementation header
7913 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7915 # No user value, uncomment the following line to provide one.
7917 # value_source default
7918 # Default value: 0 0
7921 # POSIX real time signals feature test macro
7922 # This defines the POSIX feature test macro
7923 # that indicates that the POSIX real time signals
7926 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7927 # No options implement this inferface
7928 # This value cannot be modified here.
7931 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7932 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7935 # The following properties are affected by this value
7936 # interface CYGINT_POSIX_REALTIME_SIGNALS
7937 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7941 # Non-local jumps functionality
7943 cdl_component CYGPKG_ISO_SETJMP {
7944 # There is no associated value.
7948 # setjmp() / longjmp() implementations
7950 cdl_interface CYGINT_ISO_SETJMP {
7951 # No options implement this inferface
7952 # This value cannot be modified here.
7955 # Requires: 1 >= CYGINT_ISO_SETJMP
7956 # CYGINT_ISO_SETJMP == 0
7959 # The following properties are affected by this value
7960 # interface CYGINT_ISO_SETJMP
7961 # Requires: 1 >= CYGINT_ISO_SETJMP
7964 # setjmp() / longjmp() implementation header
7966 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7968 # No user value, uncomment the following line to provide one.
7970 # value_source default
7971 # Default value: 0 0
7974 # sigsetjmp() / siglongjmp() implementations
7976 cdl_interface CYGINT_ISO_SIGSETJMP {
7977 # No options implement this inferface
7978 # This value cannot be modified here.
7981 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7982 # CYGINT_ISO_SIGSETJMP == 0
7985 # The following properties are affected by this value
7986 # interface CYGINT_ISO_SIGSETJMP
7987 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7990 # sigsetjmp() / siglongjmp() implementation header
7992 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7994 # No user value, uncomment the following line to provide one.
7996 # value_source default
7997 # Default value: 0 0
8001 # Assertions implementation header
8003 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8005 # No user value, uncomment the following line to provide one.
8007 # value_source default
8008 # Default value: 0 0
8011 # POSIX file control
8012 # This covers the POSIX file control definitions,
8013 # normally found in <fcntl.h>
8015 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8016 # There is no associated value.
8020 # POSIX open flags implementation header
8022 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8024 # No user value, uncomment the following line to provide one.
8026 # value_source default
8027 # Default value: 0 0
8030 # POSIX fcntl() implementations
8032 cdl_interface CYGINT_ISO_FCNTL {
8033 # No options implement this inferface
8034 # This value cannot be modified here.
8037 # Requires: 1 >= CYGINT_ISO_FCNTL
8038 # CYGINT_ISO_FCNTL == 0
8041 # The following properties are affected by this value
8042 # interface CYGINT_ISO_FCNTL
8043 # Requires: 1 >= CYGINT_ISO_FCNTL
8046 # POSIX fcntl() implementation header
8048 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8050 # No user value, uncomment the following line to provide one.
8052 # value_source default
8053 # Default value: 0 0
8056 # POSIX file open implementations
8058 cdl_interface CYGINT_ISO_OPEN {
8059 # No options implement this inferface
8060 # This value cannot be modified here.
8063 # Requires: 1 >= CYGINT_ISO_OPEN
8064 # CYGINT_ISO_OPEN == 0
8067 # The following properties are affected by this value
8068 # interface CYGINT_ISO_OPEN
8069 # Requires: 1 >= CYGINT_ISO_OPEN
8072 # POSIX file open implementation header
8074 cdl_option CYGBLD_ISO_OPEN_HEADER {
8076 # No user value, uncomment the following line to provide one.
8078 # value_source default
8079 # Default value: 0 0
8083 # <sys/stat.h> definitions implementation header
8085 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8087 # No user value, uncomment the following line to provide one.
8089 # value_source default
8090 # Default value: 0 0
8093 # POSIX directory reading implementation
8095 cdl_interface CYGINT_ISO_DIRENT {
8096 # No options implement this inferface
8097 # This value cannot be modified here.
8100 # Requires: 1 >= CYGINT_ISO_DIRENT
8101 # CYGINT_ISO_DIRENT == 0
8104 # The following properties are affected by this value
8105 # interface CYGINT_ISO_DIRENT
8106 # Requires: 1 >= CYGINT_ISO_DIRENT
8109 # <dirent.h> definitions implementation header
8111 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8113 # No user value, uncomment the following line to provide one.
8115 # value_source default
8116 # Default value: 0 0
8119 # POSIX <sys/types.h> contents
8120 # This covers the types required by POSIX to be in
8123 cdl_component CYGPKG_ISO_POSIX_TYPES {
8124 # There is no associated value.
8128 # POSIX thread types implementations
8130 cdl_interface CYGINT_ISO_PTHREADTYPES {
8131 # No options implement this inferface
8132 # This value cannot be modified here.
8135 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8136 # CYGINT_ISO_PTHREADTYPES == 0
8139 # The following properties are affected by this value
8140 # interface CYGINT_ISO_PTHREADTYPES
8141 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8142 # interface CYGINT_ISO_PMUTEXTYPES
8143 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8146 # POSIX thread types implementation header
8148 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8150 # No user value, uncomment the following line to provide one.
8152 # value_source default
8153 # Default value: 0 0
8156 # POSIX mutex types implementations
8158 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8159 # No options implement this inferface
8160 # This value cannot be modified here.
8163 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8164 # CYGINT_ISO_PTHREADTYPES == 0
8168 # POSIX mutex types implementation header
8170 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8172 # No user value, uncomment the following line to provide one.
8174 # value_source default
8175 # Default value: 0 0
8178 # ssize_t implementation header
8180 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8182 # No user value, uncomment the following line to provide one.
8184 # value_source default
8185 # Default value: 0 0
8188 # Filesystem types implementation header
8190 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8192 # No user value, uncomment the following line to provide one.
8194 # value_source default
8195 # Default value: 0 0
8198 # gid_t, pid_t, uid_t implementation header
8200 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8202 # No user value, uncomment the following line to provide one.
8204 # value_source default
8205 # Default value: 0 0
8209 # Non-POSIX <sys/types.h> contents
8210 # This covers the extra types required by non-POSIX
8211 # packages to be in <sys/types.h>. These would normally
8212 # only be visible if _POSIX_SOURCE is not defined.
8214 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8215 # There is no associated value.
8219 # BSD compatible types
8221 cdl_interface CYGINT_ISO_BSDTYPES {
8222 # No options implement this inferface
8223 # This value cannot be modified here.
8226 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8227 # CYGINT_ISO_BSDTYPES == 0
8230 # The following properties are affected by this value
8231 # interface CYGINT_ISO_BSDTYPES
8232 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8237 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8239 # No user value, uncomment the following line to provide one.
8241 # value_source default
8242 # Default value: 0 0
8248 cdl_component CYGPKG_ISO_UTSNAME {
8249 # There is no associated value.
8255 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8257 # No user value, uncomment the following line to provide one.
8259 # value_source default
8260 # Default value: 0 0
8266 cdl_component CYGPKG_ISO_SCHED {
8267 # There is no associated value.
8271 # POSIX scheduler implementations
8273 cdl_interface CYGINT_ISO_SCHED_IMPL {
8274 # No options implement this inferface
8275 # This value cannot be modified here.
8278 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8279 # CYGINT_ISO_SCHED_IMPL == 0
8282 # The following properties are affected by this value
8283 # interface CYGINT_ISO_SCHED_IMPL
8284 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8287 # POSIX scheduler implementation header
8289 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8291 # No user value, uncomment the following line to provide one.
8293 # value_source default
8294 # Default value: 0 0
8300 cdl_component CYGPKG_ISO_SEMAPHORES {
8301 # There is no associated value.
8305 # POSIX semaphore implementations
8307 cdl_interface CYGINT_ISO_SEMAPHORES {
8308 # No options implement this inferface
8309 # This value cannot be modified here.
8312 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8313 # CYGINT_ISO_SEMAPHORES == 0
8316 # The following properties are affected by this value
8317 # interface CYGINT_ISO_SEMAPHORES
8318 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8321 # POSIX semaphore implementation header
8323 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8325 # No user value, uncomment the following line to provide one.
8327 # value_source default
8328 # Default value: 0 0
8332 # POSIX message queues
8334 cdl_component CYGPKG_ISO_MQUEUE {
8335 # There is no associated value.
8341 cdl_interface CYGINT_ISO_MQUEUE {
8342 # No options implement this inferface
8343 # This value cannot be modified here.
8346 # Requires: 1 >= CYGINT_ISO_MQUEUE
8347 # CYGINT_ISO_MQUEUE == 0
8350 # The following properties are affected by this value
8351 # interface CYGINT_ISO_MQUEUE
8352 # Requires: 1 >= CYGINT_ISO_MQUEUE
8353 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8354 # ActiveIf: CYGINT_ISO_MQUEUE
8355 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8356 # ActiveIf: CYGINT_ISO_MQUEUE
8359 # Implementation header
8361 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8363 # No user value, uncomment the following line to provide one.
8365 # value_source default
8366 # Default value: 0 0
8369 # Maximum number of open message queues
8371 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8372 # This option is not active
8373 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8374 # CYGINT_ISO_MQUEUE == 0
8378 # No user value, uncomment the following line to provide one.
8380 # value_source default
8381 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8382 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8383 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8387 # Maximum number of message priorities
8389 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8390 # This option is not active
8391 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8392 # CYGINT_ISO_MQUEUE == 0
8396 # No user value, uncomment the following line to provide one.
8397 # user_value 1 65535
8398 # value_source default
8399 # Default value: 1 65535
8405 cdl_component CYGPKG_ISO_PTHREAD {
8406 # There is no associated value.
8410 # POSIX pthread implementations
8412 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8413 # No options implement this inferface
8414 # This value cannot be modified here.
8416 # Current value: 0 0
8417 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8418 # CYGINT_ISO_PTHREAD_IMPL == 0
8421 # The following properties are affected by this value
8422 # interface CYGINT_ISO_PTHREAD_IMPL
8423 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8426 # POSIX pthread implementation header
8428 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8430 # No user value, uncomment the following line to provide one.
8432 # value_source default
8433 # Default value: 0 0
8436 # POSIX mutex/cond var implementations
8438 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8439 # No options implement this inferface
8440 # This value cannot be modified here.
8442 # Current value: 0 0
8443 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8444 # CYGINT_ISO_PTHREAD_MUTEX == 0
8447 # The following properties are affected by this value
8448 # interface CYGINT_ISO_PTHREAD_MUTEX
8449 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8452 # POSIX mutex/cond var implementation header
8454 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8456 # No user value, uncomment the following line to provide one.
8458 # value_source default
8459 # Default value: 0 0
8465 cdl_component CYGPKG_ISO_LIMITS {
8466 # There is no associated value.
8470 # POSIX pthread limits implementations
8472 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8473 # No options implement this inferface
8474 # This value cannot be modified here.
8477 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8478 # CYGINT_ISO_POSIX_LIMITS == 0
8481 # The following properties are affected by this value
8482 # interface CYGINT_ISO_POSIX_LIMITS
8483 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8486 # POSIX pthread limits implementation header
8488 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8490 # No user value, uncomment the following line to provide one.
8492 # value_source default
8493 # Default value: 0 0
8496 # OPEN_MAX implementation header
8498 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8500 # No user value, uncomment the following line to provide one.
8502 # value_source default
8503 # Default value: 0 0
8506 # LINK_MAX implementation header
8508 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8510 # No user value, uncomment the following line to provide one.
8512 # value_source default
8513 # Default value: 0 0
8516 # NAME_MAX implementation header
8518 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8520 # No user value, uncomment the following line to provide one.
8522 # value_source default
8523 # Default value: 0 0
8526 # PATH_MAX implementation header
8528 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8530 # No user value, uncomment the following line to provide one.
8532 # value_source default
8533 # Default value: 0 0
8539 cdl_component CYGPKG_ISO_TERMIOS {
8540 # There is no associated value.
8544 # POSIX termios implementations
8546 cdl_interface CYGINT_ISO_TERMIOS {
8547 # No options implement this inferface
8548 # This value cannot be modified here.
8551 # Requires: 1 >= CYGINT_ISO_TERMIOS
8552 # CYGINT_ISO_TERMIOS == 0
8555 # The following properties are affected by this value
8556 # interface CYGINT_ISO_TERMIOS
8557 # Requires: 1 >= CYGINT_ISO_TERMIOS
8560 # POSIX termios implementation header
8562 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8564 # No user value, uncomment the following line to provide one.
8566 # value_source default
8567 # Default value: 0 0
8573 cdl_component CYGPKG_ISO_DLFCN {
8574 # There is no associated value.
8578 # Dynamic load implementations
8580 cdl_interface CYGINT_ISO_DLFCN {
8581 # No options implement this inferface
8582 # This value cannot be modified here.
8585 # Requires: 1 >= CYGINT_ISO_DLFCN
8586 # CYGINT_ISO_DLFCN == 0
8589 # The following properties are affected by this value
8590 # interface CYGINT_ISO_DLFCN
8591 # Requires: 1 >= CYGINT_ISO_DLFCN
8594 # Dynamic load implementation header
8596 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8598 # No user value, uncomment the following line to provide one.
8600 # value_source default
8601 # Default value: 0 0
8605 # UNIX standard functions
8607 cdl_component CYGPKG_ISO_UNISTD {
8608 # There is no associated value.
8612 # POSIX timer operations implementations
8614 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8615 # No options implement this inferface
8616 # This value cannot be modified here.
8618 # Current value: 0 0
8619 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8620 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8623 # The following properties are affected by this value
8624 # interface CYGINT_ISO_POSIX_TIMER_OPS
8625 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8628 # POSIX timer operations implementation header
8630 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8632 # No user value, uncomment the following line to provide one.
8634 # value_source default
8635 # Default value: 0 0
8638 # POSIX sleep() implementations
8640 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8641 # No options implement this inferface
8642 # This value cannot be modified here.
8644 # Current value: 0 0
8645 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8646 # CYGINT_ISO_POSIX_SLEEP == 0
8649 # The following properties are affected by this value
8650 # interface CYGINT_ISO_POSIX_SLEEP
8651 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8654 # POSIX sleep() implementation header
8656 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8658 # No user value, uncomment the following line to provide one.
8660 # value_source default
8661 # Default value: 0 0
8665 # select()/poll() functions
8667 cdl_component CYGPKG_ISO_SELECT {
8668 # There is no associated value.
8672 # select() implementations
8674 cdl_interface CYGINT_ISO_SELECT {
8675 # No options implement this inferface
8676 # This value cannot be modified here.
8678 # Current value: 0 0
8679 # Requires: 1 >= CYGINT_ISO_SELECT
8680 # CYGINT_ISO_SELECT == 0
8683 # The following properties are affected by this value
8684 # interface CYGINT_ISO_SELECT
8685 # Requires: 1 >= CYGINT_ISO_SELECT
8688 # select() implementation header
8690 cdl_option CYGBLD_ISO_SELECT_HEADER {
8692 # No user value, uncomment the following line to provide one.
8694 # value_source default
8695 # Default value: 0 0
8698 # poll() implementations
8700 cdl_interface CYGINT_ISO_POLL {
8701 # No options implement this inferface
8702 # This value cannot be modified here.
8704 # Current value: 0 0
8705 # Requires: 1 >= CYGINT_ISO_POLL
8706 # CYGINT_ISO_POLL == 0
8709 # The following properties are affected by this value
8710 # interface CYGINT_ISO_POLL
8711 # Requires: 1 >= CYGINT_ISO_POLL
8714 # poll() implementation header
8716 cdl_option CYGBLD_ISO_POLL_HEADER {
8718 # No user value, uncomment the following line to provide one.
8720 # value_source default
8721 # Default value: 0 0
8725 # NetDB utility functions
8727 cdl_component CYGPKG_ISO_NETDB {
8728 # There is no associated value.
8732 # DNS implementations
8734 cdl_interface CYGINT_ISO_DNS {
8735 # No options implement this inferface
8736 # This value cannot be modified here.
8739 # Requires: 1 >= CYGINT_ISO_DNS
8740 # CYGINT_ISO_DNS == 0
8743 # The following properties are affected by this value
8744 # interface CYGINT_ISO_DNS
8745 # Requires: 1 >= CYGINT_ISO_DNS
8748 # DNS implementation header
8750 cdl_option CYGBLD_ISO_DNS_HEADER {
8752 # No user value, uncomment the following line to provide one.
8754 # value_source default
8755 # Default value: 0 0
8758 # Protocol network database implementations
8760 cdl_interface CYGINT_ISO_NETDB_PROTO {
8761 # No options implement this inferface
8762 # This value cannot be modified here.
8765 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8766 # CYGINT_ISO_NETDB_PROTO == 0
8769 # The following properties are affected by this value
8770 # interface CYGINT_ISO_NETDB_PROTO
8771 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8774 # Protocol network database implementation header
8776 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8778 # No user value, uncomment the following line to provide one.
8780 # value_source default
8781 # Default value: 0 0
8784 # Services network database implementations
8786 cdl_interface CYGINT_ISO_NETDB_SERV {
8787 # No options implement this inferface
8788 # This value cannot be modified here.
8791 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8792 # CYGINT_ISO_NETDB_SERV == 0
8795 # The following properties are affected by this value
8796 # interface CYGINT_ISO_NETDB_SERV
8797 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8800 # Services network database implementation header
8802 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8804 # No user value, uncomment the following line to provide one.
8806 # value_source default
8807 # Default value: 0 0
8812 # Package specific build options including control over
8813 # compiler flags used only in building this package,
8814 # and details of which tests are built.
8816 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8817 # There is no associated value.
8821 # Additional compiler flags
8822 # This option modifies the set of compiler flags for
8823 # building the ISO C and POSIX infrastructure package.
8824 # These flags are used in addition to the set of global flags.
8826 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8828 # No user value, uncomment the following line to provide one.
8830 # value_source default
8834 # Suppressed compiler flags
8835 # This option modifies the set of compiler flags for
8836 # building the ISO C and POSIX infrastructure package.
8837 # These flags are removed from the set of global flags
8840 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8842 # No user value, uncomment the following line to provide one.
8844 # value_source default
8851 # doc: ref/services-crc.html
8852 # This package provides support for CRC calculation. Currently
8853 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8854 # Gary S. Brown, and a 16 bit CRC.
8856 cdl_package CYGPKG_CRC {
8857 # Packages cannot be added or removed, nor can their version be changed,
8858 # simply by editing their value. Instead the appropriate configuration
8859 # should be used to perform these actions.
8861 # This value cannot be modified here.
8863 # Current value: 1 current
8865 # The following properties are affected by this value
8866 # package CYGPKG_COMPRESS_ZLIB
8867 # Requires: CYGPKG_CRC
8873 cdl_option CYGPKG_CRC_TESTS {
8874 # Calculated value: "tests/crc_test"
8876 # Current_value: tests/crc_test
8880 # Zlib compress and decompress package
8881 # This package provides support for compression and
8884 cdl_package CYGPKG_COMPRESS_ZLIB {
8885 # Packages cannot be added or removed, nor can their version be changed,
8886 # simply by editing their value. Instead the appropriate configuration
8887 # should be used to perform these actions.
8889 # This value cannot be modified here.
8891 # Current value: 1 current
8892 # Requires: CYGPKG_ISOINFRA
8893 # CYGPKG_ISOINFRA == current
8895 # Requires: CYGPKG_CRC
8896 # CYGPKG_CRC == current
8899 # The following properties are affected by this value
8900 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8901 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8905 # Override memory allocation routines.
8907 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8908 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8909 # This value cannot be modified here.
8913 # The following properties are affected by this value
8914 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8915 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8918 # Should deflate() produce 'gzip' compatible output?
8919 # If this option is set then the output of calling deflate()
8920 # will be wrapped up as a 'gzip' compatible file.
8922 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8924 # No user value, uncomment the following line to provide one.
8926 # value_source default
8930 # Does this library need malloc?
8931 # This pseudo-option will force the memalloc library to be
8932 # required iff the application does not provide it's own
8935 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8936 # This option is not active
8937 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8938 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8942 # No user value, uncomment the following line to provide one.
8944 # value_source default
8946 # Requires: CYGPKG_MEMALLOC
8947 # CYGPKG_MEMALLOC == current
8951 # Include stdio-like utility functions
8952 # This option enables the stdio-like zlib utility functions
8953 # (gzread/gzwrite and friends) provided in gzio.c.
8955 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8957 # No user value, uncomment the following line to provide one.
8959 # value_source default
8960 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8961 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8963 # Requires: CYGINT_ISO_STDIO_FILEPOS
8964 # CYGINT_ISO_STDIO_FILEPOS == 0
8966 # Requires: CYGINT_ISO_STRING_STRFUNCS
8967 # CYGINT_ISO_STRING_STRFUNCS == 1
8969 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8970 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8972 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8973 # CYGINT_ISO_STDIO_FILEACCESS == 0
8977 # Zlib compress and decompress package build options
8978 # Package specific build options including control over
8979 # compiler flags used only in building this package,
8980 # and details of which tests are built.
8982 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8983 # There is no associated value.
8987 # Additional compiler flags
8988 # This option modifies the set of compiler flags for
8989 # building this package. These flags are used in addition
8990 # to the set of global flags.
8992 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8994 # No user value, uncomment the following line to provide one.
8995 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8996 # value_source default
8997 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9000 # Suppressed compiler flags
9001 # This option modifies the set of compiler flags for
9002 # building this package. These flags are removed from
9003 # the set of global flags if present.
9005 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9007 # No user value, uncomment the following line to provide one.
9008 # user_value -Wstrict-prototypes
9009 # value_source default
9010 # Default value: -Wstrict-prototypes
9013 # Additional compiler flags
9014 # This option modifies the set of compiler flags for
9015 # building this package. These flags are used in addition
9016 # to the set of global flags.
9018 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9020 # No user value, uncomment the following line to provide one.
9022 # value_source default
9026 # Suppressed compiler flags
9027 # This option modifies the set of compiler flags for
9028 # building this package. These flags are removed from
9029 # the set of global flags if present.
9031 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9033 # No user value, uncomment the following line to provide one.
9035 # value_source default
9042 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9043 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9045 # Current_value: tests/zlib1.c tests/zlib2.c
9049 # FLASH device drivers
9050 # doc: ref/flash.html
9051 # This option enables drivers for basic I/O services on
9054 cdl_package CYGPKG_IO_FLASH {
9055 # Packages cannot be added or removed, nor can their version be changed,
9056 # simply by editing their value. Instead the appropriate configuration
9057 # should be used to perform these actions.
9059 # This value cannot be modified here.
9061 # Current value: 1 current
9062 # Requires: CYGPKG_ISOINFRA
9063 # CYGPKG_ISOINFRA == current
9065 # Requires: CYGINT_ISO_STRING_STRFUNCS
9066 # CYGINT_ISO_STRING_STRFUNCS == 1
9069 # The following properties are affected by this value
9070 # component CYGSEM_REDBOOT_FLASH_CONFIG
9071 # DefaultValue: CYGPKG_IO_FLASH != 0
9072 # package CYGPKG_DEVS_FLASH_ONMXC
9073 # ActiveIf: CYGPKG_IO_FLASH
9077 # Hardware FLASH device drivers
9078 # This option enables the hardware device drivers
9079 # for the current platform.
9081 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9082 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9083 # This value cannot be modified here.
9087 # The following properties are affected by this value
9088 # component CYGPKG_REDBOOT_FLASH
9089 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9092 # Hardware FLASH device drivers are not in RAM
9093 # Use of this interface is deprecated.
9094 # Drivers should make sure that the functions are
9095 # linked to RAM by putting them in .2ram sections.
9097 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9098 # No options implement this inferface
9099 # This value cannot be modified here.
9101 # Current value: 0 0
9102 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9103 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9106 # The following properties are affected by this value
9107 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9108 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9111 # Hardware can support block locking
9112 # This option will be enabled by devices which can support
9113 # locking (write-protection) of individual blocks.
9115 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9116 # No options implement this inferface
9117 # This value cannot be modified here.
9119 # Current value: 0 0
9121 # The following properties are affected by this value
9122 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9123 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9126 # Hardware cannot support direct access to FLASH memory
9127 # This option will be asserted by devices which cannot support
9128 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9129 # devices). In these cases, the driver must provide an appropriate
9130 # hardware access function.
9132 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9134 # No user value, uncomment the following line to provide one.
9136 # The inferred value should not be edited directly.
9138 # value_source inferred
9140 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9141 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9144 # The following properties are affected by this value
9145 # option CYGPRI_REDBOOT_ZLIB_FLASH
9146 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9147 # component CYGHWR_DEVS_FLASH_MMC
9148 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9149 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9150 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9151 # option CYGHWR_DEVS_FLASH_MMC_SD
9152 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9153 # option CYGHWR_DEVS_FLASH_MXC_NAND
9154 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9157 # Display status messages during flash operations
9158 # Selecting this option will cause the drivers to print status
9159 # messages as various flash operations are undertaken.
9161 cdl_option CYGSEM_IO_FLASH_CHATTER {
9163 # No user value, uncomment the following line to provide one.
9165 # value_source default
9169 # Verify data programmed to flash
9170 # Selecting this option will cause verification of data
9171 # programmed to flash.
9173 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9175 # No user value, uncomment the following line to provide one.
9177 # The inferred value should not be edited directly.
9179 # value_source inferred
9182 # The following properties are affected by this value
9183 # option CYGSEM_IO_FLASH_READ_INDIRECT
9184 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9187 # Platform has flash soft DIP switch write-protect
9188 # Selecting this option will cause the state of a hardware jumper or
9189 # dipswitch to be read by software to determine whether the flash is
9190 # write-protected or not.
9192 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9194 # No user value, uncomment the following line to provide one.
9196 # value_source default
9200 # Instantiate in I/O block device API
9201 # Provides a block device accessible using the standard I/O
9202 # API ( cyg_io_read() etc. )
9204 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9205 # This option is not active
9206 # ActiveIf constraint: CYGPKG_IO
9207 # CYGPKG_IO (unknown) == 0
9211 # No user value, uncomment the following line to provide one.
9213 # value_source default
9218 # Name of flash device 1 block device
9220 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9221 # This option is not active
9222 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9223 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9226 # No user value, uncomment the following line to provide one.
9227 # user_value "\"/dev/flash1\""
9228 # value_source default
9229 # Default value: "\"/dev/flash1\""
9234 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9235 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9236 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9237 # This option is not active
9238 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9240 # This value cannot be modified here.
9243 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9244 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9247 # The following properties are affected by this value
9248 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9249 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9252 # Static configuration
9253 # This configures the flash device 1 block device
9254 # with static base and length
9256 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9257 # This option is not active
9258 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9261 # No user value, uncomment the following line to provide one.
9263 # value_source default
9268 # Start offset from flash base
9269 # This gives the offset from the base of flash which this
9270 # block device corresponds to.
9272 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9273 # This option is not active
9274 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9277 # No user value, uncomment the following line to provide one.
9278 # user_value 0x00100000
9279 # value_source default
9280 # Default value: 0x00100000
9284 # This gives the length of the region of flash given over
9285 # to this block device.
9287 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9288 # This option is not active
9289 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9292 # No user value, uncomment the following line to provide one.
9293 # user_value 0x00100000
9294 # value_source default
9295 # Default value: 0x00100000
9299 # Configuration from FIS
9300 # This configures the flash device 1 block device
9303 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9304 # This option is not active
9305 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9308 # No user value, uncomment the following line to provide one.
9310 # value_source default
9317 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9318 # This option is not active
9319 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9320 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9323 # No user value, uncomment the following line to provide one.
9324 # user_value "\"jffs2\""
9325 # value_source default
9326 # Default value: "\"jffs2\""
9332 # Flash device driver build options
9333 # Package specific build options including control over
9334 # compiler flags used only in building this package,
9335 # and details of which tests are built.
9337 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9338 # There is no associated value.
9342 # Additional compiler flags
9343 # This option modifies the set of compiler flags for
9344 # building the flash device drivers. These flags are used in addition
9345 # to the set of global flags.
9347 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9349 # No user value, uncomment the following line to provide one.
9351 # value_source default
9355 # Suppressed compiler flags
9356 # This option modifies the set of compiler flags for
9357 # building the flash device drivers. These flags are removed from
9358 # the set of global flags if present.
9360 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9362 # No user value, uncomment the following line to provide one.
9364 # value_source default
9368 # Flash device driver tests
9369 # This option specifies the set of tests for the flash device drivers.
9371 cdl_component CYGPKG_IO_FLASH_TESTS {
9372 # Calculated value: "tests/flash1"
9374 # Current_value: tests/flash1
9378 # Start offset from flash base
9379 # This gives the offset from the base of flash where tests
9380 # can be run. It is important to set this correctly, as an
9381 # incorrect value could allow the tests to write over critical
9382 # portions of the FLASH device and possibly render the target
9383 # board totally non-functional.
9385 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9387 # No user value, uncomment the following line to provide one.
9388 # user_value 0x00100000
9389 # value_source default
9390 # Default value: 0x00100000
9394 # This gives the length of the region of flash used for testing.
9396 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9398 # No user value, uncomment the following line to provide one.
9399 # user_value 0x00100000
9400 # value_source default
9401 # Default value: 0x00100000
9406 # Support FLASH memory on Freescale MXC platforms
9408 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9409 # Packages cannot be added or removed, nor can their version be changed,
9410 # simply by editing their value. Instead the appropriate configuration
9411 # should be used to perform these actions.
9413 # ActiveIf constraint: CYGPKG_IO_FLASH
9414 # CYGPKG_IO_FLASH == current
9417 # This value cannot be modified here.
9419 # Current value: 1 current
9423 # MXC platform MMC card support
9424 # When this option is enabled, it indicates MMC card is
9425 # supported on the MXC platforms
9427 cdl_component CYGHWR_DEVS_FLASH_MMC {
9429 # No user value, uncomment the following line to provide one.
9431 # value_source default
9433 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9434 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9437 # The following properties are affected by this value
9438 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9439 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9440 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9441 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9442 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9443 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9444 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9445 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9449 # MXC platform MMC card for newer SDHC controllers
9451 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9452 # This option is not active
9453 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9454 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9455 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51
9456 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9457 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9458 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9459 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9463 # No user value, uncomment the following line to provide one.
9465 # value_source default
9467 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9468 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9472 # MXC platform MMC card for older MMC/SD controllers
9474 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9475 # This option is not active
9476 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9477 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9478 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9479 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9483 # No user value, uncomment the following line to provide one.
9485 # value_source default
9487 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9488 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9493 # MXC platform NOR flash memory support
9494 # When this option is enabled, it indicates NOR flash is
9495 # supported on the MXC platforms
9497 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9499 # No user value, uncomment the following line to provide one.
9501 # The inferred value should not be edited directly.
9503 # value_source inferred
9506 # The following properties are affected by this value
9507 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9508 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9509 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9510 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9511 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9512 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9513 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9514 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9515 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9516 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9519 # MXC platform NAND flash memory support
9520 # When this option is enabled, it indicates NAND flash is
9521 # supported on the MXC platforms
9523 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9525 # No user value, uncomment the following line to provide one.
9527 # The inferred value should not be edited directly.
9529 # value_source inferred
9531 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9532 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9535 # The following properties are affected by this value
9536 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9537 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9538 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9539 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9540 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9541 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9542 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9543 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9544 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9545 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9546 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9547 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9550 # i.MX platform SPI NOR flash memory support
9551 # When this option is enabled, it indicates SPI NOR flash is
9552 # supported on the i.MX platforms
9554 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9556 # No user value, uncomment the following line to provide one.
9558 # value_source default
9560 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9561 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9565 # MXC platform ATA support
9566 # When this option is enabled, it indicates ATA is
9567 # supported on the MXC platforms
9569 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9571 # No user value, uncomment the following line to provide one.
9573 # value_source default
9577 # Use a flash based Bad Block Table
9579 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9580 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9581 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9584 # There is no associated value.
9588 # When this option is enabled, the driver will search for a flash
9589 # based bad block table
9591 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9593 # No user value, uncomment the following line to provide one.
9595 # value_source default
9599 # header file defining the NAND BBT descriptor
9600 # defines the name of the header file that describes the BBT layout
9602 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9604 # No user value, uncomment the following line to provide one.
9606 # The inferred value should not be edited directly.
9607 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9608 # value_source inferred
9609 # Default value: 0 0
9612 # Number of blocks to reserve for BBT
9613 # Number of blocks to reserve for BBT
9615 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9617 # No user value, uncomment the following line to provide one.
9619 # value_source default
9624 # MXC platform multi flash memory support
9625 # When this option is enabled, it indicates multi flashes are
9626 # supported on the MXC platforms (like NAND and NOR)
9628 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9629 # This option is not active
9630 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9631 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9632 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9633 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9634 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9635 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9636 # CYGHWR_DEVS_FLASH_MMC == 0
9637 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9638 # CYGHWR_DEVS_FLASH_MMC == 0
9642 # No user value, uncomment the following line to provide one.
9644 # The inferred value should not be edited directly.
9646 # value_source inferred
9650 # MXC platform NAND flash reset workaround support
9651 # When this option is enabled, it indicates 0xFFFF is used for
9652 # the NAND reset command instead of 0xFF.
9654 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9655 # No options implement this inferface
9656 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9657 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9660 # This value cannot be modified here.
9667 # Dynamic memory allocation
9668 # doc: ref/memalloc.html
9669 # This package provides memory allocator infrastructure required for
9670 # dynamic memory allocators, including the ISO standard malloc
9671 # interface. It also contains some sample implementations.
9673 cdl_package CYGPKG_MEMALLOC {
9674 # Packages cannot be added or removed, nor can their version be changed,
9675 # simply by editing their value. Instead the appropriate configuration
9676 # should be used to perform these actions.
9678 # This value cannot be modified here.
9680 # Current value: 1 current
9682 # The following properties are affected by this value
9683 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9684 # Requires: CYGPKG_MEMALLOC
9688 # Memory allocator implementations
9689 # This component contains configuration options related to the
9690 # various memory allocators available.
9692 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9693 # There is no associated value.
9697 # Fixed block allocator
9698 # This component contains configuration options related to the
9699 # fixed block memory allocator.
9701 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9702 # There is no associated value.
9707 # With this option enabled, this allocator will be
9708 # made thread-safe. Additionally allocation functions
9709 # are made available that allow a thread to wait
9710 # until memory is available.
9712 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9713 # This option is not active
9714 # ActiveIf constraint: CYGPKG_KERNEL
9715 # CYGPKG_KERNEL (unknown) == 0
9719 # No user value, uncomment the following line to provide one.
9721 # value_source default
9726 # Simple variable block allocator
9727 # This component contains configuration options related to the
9728 # simple variable block memory allocator. This allocator is not
9729 # very fast, and in particular does not scale well with large
9730 # numbers of allocations. It is however very compact in terms of
9731 # code size and does not have very much overhead per allocation.
9733 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9734 # There is no associated value.
9739 # With this option enabled, this allocator will be
9740 # made thread-safe. Additionally allocation functions
9741 # are added that allow a thread to wait until memory
9742 # are made available that allow a thread to wait
9743 # until memory is available.
9745 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9746 # This option is not active
9747 # ActiveIf constraint: CYGPKG_KERNEL
9748 # CYGPKG_KERNEL (unknown) == 0
9752 # No user value, uncomment the following line to provide one.
9754 # value_source default
9759 # The variable-block memory allocator can perform coalescing
9760 # of memory whenever the application code releases memory back
9761 # to the pool. This coalescing reduces the possibility of
9762 # memory fragmentation problems, but involves extra code and
9765 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9767 # No user value, uncomment the following line to provide one.
9769 # value_source default
9772 # The following properties are affected by this value
9773 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9774 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9779 # This component contains configuration options related to the
9780 # port of Doug Lea's memory allocator, normally known as
9781 # dlmalloc. dlmalloc has a reputation for being both fast
9782 # and space-conserving, as well as resisting fragmentation well.
9783 # It is a common choice for a general purpose allocator and
9784 # has been used in both newlib and Linux glibc.
9786 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9787 # There is no associated value.
9792 # Doug Lea's malloc implementation has substantial amounts
9793 # of internal checking in order to verify the operation
9794 # and consistency of the allocator. However this imposes
9795 # substantial overhead on each operation. Therefore this
9796 # checking may be individually disabled.
9798 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9800 # No user value, uncomment the following line to provide one.
9802 # value_source default
9803 # Default value: 0 != CYGDBG_USE_ASSERTS
9804 # CYGDBG_USE_ASSERTS == 0
9806 # Requires: CYGDBG_USE_ASSERTS
9807 # CYGDBG_USE_ASSERTS == 0
9812 # With this option enabled, this allocator will be
9813 # made thread-safe. Additionally allocation functions
9814 # are made available that allow a thread to wait
9815 # until memory is available.
9817 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9818 # This option is not active
9819 # ActiveIf constraint: CYGPKG_KERNEL
9820 # CYGPKG_KERNEL (unknown) == 0
9824 # No user value, uncomment the following line to provide one.
9826 # value_source default
9828 # Requires: CYGPKG_KERNEL
9829 # CYGPKG_KERNEL (unknown) == 0
9833 # Support more than one instance
9834 # Having this option disabled allows important
9835 # implementation structures to be declared as a single
9836 # static instance, allowing faster access. However this
9837 # would fail if there is more than one instance of
9838 # the dlmalloc allocator class. Therefore this option can
9839 # be enabled if multiple instances are required. Note: as
9840 # a special case, if this allocator is used as the
9841 # implementation of malloc, and it can be determined there
9842 # is more than one malloc pool, then this option will be
9845 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9847 # No user value, uncomment the following line to provide one.
9849 # value_source default
9853 # Use system memmove() and memset()
9854 # This may be used to control whether memset() and memmove()
9855 # are used within the implementation. The alternative is
9856 # to use some macro equivalents, which some people report
9857 # are faster in some circumstances.
9859 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9861 # No user value, uncomment the following line to provide one.
9863 # value_source default
9864 # Default value: 0 != CYGPKG_ISOINFRA
9865 # CYGPKG_ISOINFRA == current
9867 # Requires: CYGPKG_ISOINFRA
9868 # CYGPKG_ISOINFRA == current
9872 # Minimum alignment of allocated blocks
9873 # This option controls the minimum alignment that the
9874 # allocated memory blocks are aligned on, specified as
9875 # 2^N. Note that using large mininum alignments can lead
9876 # to excessive memory wastage.
9878 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9880 # No user value, uncomment the following line to provide one.
9882 # value_source default
9884 # Legal values: 3 to 10
9888 # Variable block allocator with separate metadata
9889 # This component contains configuration options related to the
9890 # variable block memory allocator with separate metadata.
9892 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9893 # There is no associated value.
9898 # With this option enabled, this allocator will be
9899 # made thread-safe. Additionally allocation functions
9900 # are made available that allow a thread to wait
9901 # until memory is available.
9903 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9904 # This option is not active
9905 # ActiveIf constraint: CYGPKG_KERNEL
9906 # CYGPKG_KERNEL (unknown) == 0
9910 # No user value, uncomment the following line to provide one.
9912 # value_source default
9918 # Kernel C API support for memory allocation
9919 # This option must be enabled to provide the extensions required
9920 # to support integration into the kernel C API.
9922 cdl_option CYGFUN_MEMALLOC_KAPI {
9923 # This option is not active
9924 # ActiveIf constraint: CYGPKG_KERNEL
9925 # CYGPKG_KERNEL (unknown) == 0
9929 # No user value, uncomment the following line to provide one.
9931 # value_source default
9932 # Default value: CYGFUN_KERNEL_API_C
9933 # CYGFUN_KERNEL_API_C (unknown) == 0
9937 # malloc(0) returns NULL
9938 # This option controls the behavior of malloc(0) ( or calloc with
9939 # either argument 0 ). It is permitted by the standard to return
9940 # either a NULL pointer or a unique pointer. Enabling this option
9941 # forces a NULL pointer to be returned.
9943 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9945 # No user value, uncomment the following line to provide one.
9947 # value_source default
9951 # Breakpoint site when running out of memory
9952 # Whenever the system runs out of memory, it invokes this function
9953 # before either going to sleep waiting for memory to become
9954 # available or returning failure.
9956 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9958 # No user value, uncomment the following line to provide one.
9960 # value_source default
9964 # malloc() and supporting allocators
9965 # This component enables support for dynamic memory
9966 # allocation as supplied by the functions malloc(),
9967 # free(), calloc() and realloc(). As these
9968 # functions are often used, but can have quite an
9969 # overhead, disabling them here can ensure they
9970 # cannot even be used accidentally when static
9971 # allocation is preferred. Within this component are
9972 # various allocators that can be selected for use
9973 # as the underlying implementation of the dynamic
9974 # allocation functions.
9976 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9977 # ActiveIf constraint: CYGPKG_ISOINFRA
9978 # CYGPKG_ISOINFRA == current
9982 # No user value, uncomment the following line to provide one.
9984 # value_source default
9989 # Use external heap definition
9990 # This option allows other components in the
9991 # system to override the default system
9992 # provision of heap memory pools. This should
9993 # be set to a header which provides the equivalent
9994 # definitions to <pkgconf/heaps.hxx>.
9996 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9998 # No user value, uncomment the following line to provide one.
10000 # value_source default
10001 # Default value: 0 0
10004 # Use external implementation of joining multiple heaps
10005 # The default implementation of joining multiple heaps
10006 # is fine for the case where there are multiple disjoint
10007 # memory regions of the same type. However, in a system
10008 # there might be e.g. a small amount of internal SRAM and
10009 # a large amount of external DRAM. The SRAM is faster and
10010 # the DRAM is slower. An application can implement some
10011 # heuristic to choose which pool to allocate from. This
10012 # heuristic can be highly application specific.
10014 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10016 # No user value, uncomment the following line to provide one.
10018 # value_source default
10019 # Default value: 0 0
10022 # malloc() allocator implementations
10024 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10025 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10026 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10027 # This value cannot be modified here.
10030 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10031 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10034 # The following properties are affected by this value
10035 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10036 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10039 # malloc() implementation instantiation data
10040 # Memory allocator implementations that are capable of being
10041 # used underneath malloc() must be instantiated. The code
10042 # to do this is set in this option. It is only intended to
10043 # be set by the implementation, not the user.
10045 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10047 # No user value, uncomment the following line to provide one.
10048 # user_value <cyg/memalloc/dlmalloc.hxx>
10049 # value_source default
10050 # Default value: <cyg/memalloc/dlmalloc.hxx>
10052 # The following properties are affected by this value
10053 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10054 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10055 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10056 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10059 # Simple variable block implementation
10060 # This causes malloc() to use the simple
10061 # variable block allocator.
10063 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10065 # No user value, uncomment the following line to provide one.
10067 # value_source default
10069 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10070 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10072 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10073 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10077 # Doug Lea's malloc implementation
10078 # This causes malloc() to use a version of Doug Lea's
10079 # malloc (dlmalloc) as the underlying implementation.
10081 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10083 # No user value, uncomment the following line to provide one.
10085 # value_source default
10087 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10088 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10093 # Size of the fallback dynamic memory pool in bytes
10094 # If *no* heaps are configured in your memory layout,
10095 # dynamic memory allocation by
10096 # malloc() and calloc() must be from a fixed-size,
10097 # contiguous memory pool (note here that it is the
10098 # pool that is of a fixed size, but malloc() is still
10099 # able to allocate variable sized chunks of memory
10100 # from it). This option is the size
10101 # of that pool, in bytes. Note that not all of
10102 # this is available for programs to
10103 # use - some is needed for internal information
10104 # about memory regions, and some may be lost to
10105 # ensure that memory allocation only returns
10106 # memory aligned on word (or double word)
10107 # boundaries - a very common architecture
10110 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10112 # No user value, uncomment the following line to provide one.
10114 # value_source default
10115 # Default value: 16384
10116 # Legal values: 32 to 0x7fffffff
10119 # Common memory allocator package build options
10120 # Package specific build options including control over
10121 # compiler flags used only in building this package,
10122 # and details of which tests are built.
10124 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10125 # There is no associated value.
10129 # Additional compiler flags
10130 # This option modifies the set of compiler flags for
10131 # building this package. These flags are used in addition
10132 # to the set of global flags.
10134 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10136 # No user value, uncomment the following line to provide one.
10137 # user_value "-fno-rtti -Woverloaded-virtual"
10138 # value_source default
10139 # Default value: "-fno-rtti -Woverloaded-virtual"
10142 # Suppressed compiler flags
10143 # This option modifies the set of compiler flags for
10144 # building this package. These flags are removed from
10145 # the set of global flags if present.
10147 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10149 # No user value, uncomment the following line to provide one.
10150 # user_value -Wno-pointer-sign
10151 # value_source default
10152 # Default value: -Wno-pointer-sign
10156 # This option specifies the set of tests for this package.
10158 cdl_option CYGPKG_MEMALLOC_TESTS {
10159 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10161 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10166 # Common error code support
10167 # This package contains the common list of error and
10168 # status codes. It is held centrally to allow
10169 # packages to interchange error codes and status
10170 # codes in a common way, rather than each package
10171 # having its own conventions for error/status
10172 # reporting. The error codes are modelled on the
10173 # POSIX style naming e.g. EINVAL etc. This package
10174 # also provides the standard strerror() function to
10175 # convert error codes to textual representation, as
10176 # well as an implementation of the errno idiom.
10178 cdl_package CYGPKG_ERROR {
10179 # Packages cannot be added or removed, nor can their version be changed,
10180 # simply by editing their value. Instead the appropriate configuration
10181 # should be used to perform these actions.
10183 # This value cannot be modified here.
10185 # Current value: 1 current
10186 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10187 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10193 # This package controls the behaviour of the
10194 # errno variable (or more strictly, expression)
10197 cdl_component CYGPKG_ERROR_ERRNO {
10199 # No user value, uncomment the following line to provide one.
10201 # value_source default
10203 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10204 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10210 # This option controls whether the standard error
10211 # code reporting variable errno is a per-thread
10212 # variable, rather than global.
10214 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10216 # No user value, uncomment the following line to provide one.
10218 # The inferred value should not be edited directly.
10220 # value_source inferred
10222 # Requires: CYGVAR_KERNEL_THREADS_DATA
10223 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10228 # Trace verbosity level for debugging the errno
10229 # retrieval mechanism in errno.cxx. Increase this
10230 # value to get additional trace output.
10232 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10234 # No user value, uncomment the following line to provide one.
10236 # value_source default
10238 # Legal values: 0 to 1
10242 # strerror function
10243 # This package controls the presence and behaviour of the
10244 # strerror() function from <string.h>
10246 cdl_option CYGPKG_ERROR_STRERROR {
10248 # No user value, uncomment the following line to provide one.
10250 # value_source default
10252 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10253 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10257 # Error package build options
10258 # Package specific build options including control over
10259 # compiler flags used only in building this package,
10260 # and details of which tests are built.
10262 cdl_component CYGPKG_ERROR_OPTIONS {
10263 # There is no associated value.
10267 # Additional compiler flags
10268 # This option modifies the set of compiler flags for
10269 # building the error package. These flags are used in addition
10270 # to the set of global flags.
10272 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10274 # No user value, uncomment the following line to provide one.
10276 # value_source default
10277 # Default value: ""
10280 # Suppressed compiler flags
10281 # This option modifies the set of compiler flags for
10282 # building the error package. These flags are removed from
10283 # the set of global flags if present.
10285 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10287 # No user value, uncomment the following line to provide one.
10289 # value_source default
10290 # Default value: ""
10295 # I2C driver for FSL MXC-based platforms
10297 cdl_package CYGPKG_DEVS_MXC_I2C {
10298 # Packages cannot be added or removed, nor can their version be changed,
10299 # simply by editing their value. Instead the appropriate configuration
10300 # should be used to perform these actions.
10302 # This value cannot be modified here.
10304 # Current value: 1 current
10307 # ipu driver for mxc
10309 cdl_package CYGPKG_DEVS_IMX_IPU {
10310 # Packages cannot be added or removed, nor can their version be changed,
10311 # simply by editing their value. Instead the appropriate configuration
10312 # should be used to perform these actions.
10314 # This value cannot be modified here.
10316 # Current value: 1 current
10318 # The following properties are affected by this value
10319 # option CYGHWR_MX53_LCD_LOGO
10320 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10324 # IPU version 3EX support
10325 # When this option is enabled, it indicates the IPU version
10328 cdl_option CYGHWR_DEVS_IPU_3_EX {
10330 # No user value, uncomment the following line to provide one.
10332 # The inferred value should not be edited directly.
10334 # value_source inferred
10338 # IPU version 3D support
10339 # When this option is enabled, it indicates the IPU version
10342 cdl_option CYGHWR_DEVS_IPU_3_D {
10344 # No user value, uncomment the following line to provide one.
10346 # value_source default