1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX53
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX53 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX53 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
803 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
804 # CYGPKG_HAL_ARM_MX53 == current
808 # No user value, uncomment the following line to provide one.
810 # value_source default
815 # Ethernet transceiver (PHY) support
816 # API for ethernet PHY devices
818 cdl_package CYGPKG_DEVS_ETH_PHY {
819 # Packages cannot be added or removed, nor can their version be changed,
820 # simply by editing their value. Instead the appropriate configuration
821 # should be used to perform these actions.
823 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
824 # CYGPKG_IO_ETH_DRIVERS == current
827 # This value cannot be modified here.
829 # Current value: 1 current
830 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
831 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
836 # Enable driver debugging
837 # Enables the diagnostic debug messages on the
840 cdl_option CYGDBG_DEVS_ETH_PHY {
842 # No user value, uncomment the following line to provide one.
844 # value_source default
848 # Time period (seconds) to wait for auto-negotiation
849 # The length of time to wait for auto-negotiation to complete
850 # before giving up and declaring the link dead/missing.
852 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
854 # No user value, uncomment the following line to provide one.
856 # value_source default
861 # Include support for National Semiconductor DP83847 DsPHYTER II
863 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
865 # No user value, uncomment the following line to provide one.
867 # value_source default
872 # Include support for AMD 79C874 NetPHY
874 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
876 # No user value, uncomment the following line to provide one.
878 # value_source default
883 # Include support for Intel LXT972xxx PHY
885 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
887 # No user value, uncomment the following line to provide one.
889 # value_source default
894 # Include support for ICS 1890 PHY
896 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
898 # No user value, uncomment the following line to provide one.
900 # value_source default
905 # Include support for ICS 1892 PHY
907 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
909 # No user value, uncomment the following line to provide one.
911 # value_source default
916 # Include support for ICS 1893 and 1893AF PHY
918 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
920 # No user value, uncomment the following line to provide one.
922 # value_source default
927 # Include support for the Davicom DM9161A PHY
929 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
931 # No user value, uncomment the following line to provide one.
933 # value_source default
938 # Include support for the Micrel KS8721 PHY
940 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
942 # No user value, uncomment the following line to provide one.
944 # value_source default
949 # Include support for SMSC LAN8700 NetPHY
951 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
953 # No user value, uncomment the following line to provide one.
955 # The inferred value should not be edited directly.
957 # value_source inferred
960 # The following properties are affected by this value
961 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
962 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
967 # ISO C library internationalization functions
969 # This package provides internationalization functions specified by the
970 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
971 # functionality and <ctype.h> functionality.
973 cdl_package CYGPKG_LIBC_I18N {
974 # Packages cannot be added or removed, nor can their version be changed,
975 # simply by editing their value. Instead the appropriate configuration
976 # should be used to perform these actions.
978 # This value cannot be modified here.
980 # Current value: 1 current
981 # Requires: CYGPKG_ISOINFRA
982 # CYGPKG_ISOINFRA == current
988 # These options determine which locales other than the "C" locale
989 # are supported and hence contribute to the size of the executable.
991 cdl_component CYGPKG_LIBC_I18N_LOCALES {
992 # There is no associated value.
996 # Support for multiple locales required
998 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
999 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1002 # This value cannot be modified here.
1004 # Current value: 0 0
1005 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1006 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1009 # The following properties are affected by this value
1012 # C-SJIS locale support
1013 # This option controls if the "C-SJIS" locale will be
1014 # supported by setlocale(). The locale is a hybrid locale
1015 # that is mostly the "C" locale with Japanese SJIS multibyte
1018 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1020 # No user value, uncomment the following line to provide one.
1022 # value_source default
1025 # The following properties are affected by this value
1026 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1027 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1028 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1029 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1032 # C-JIS locale support
1033 # This option controls if the "C-JIS" locale will be
1034 # supported by setlocale(). The locale is a hybrid locale
1035 # that is mostly the "C" locale with Japanese JIS multibyte
1038 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1040 # No user value, uncomment the following line to provide one.
1042 # value_source default
1045 # The following properties are affected by this value
1046 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1047 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1048 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1049 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1052 # C-EUCJP locale support
1053 # This option controls if the "C-EUCJP" locale will be
1054 # supported by setlocale(). The locale is a hybrid locale
1055 # that is mostly the "C" locale with Japanese EUCJP multibyte
1058 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1060 # No user value, uncomment the following line to provide one.
1062 # value_source default
1065 # The following properties are affected by this value
1066 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1067 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1068 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1069 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1073 # Newlib's ctype implementation
1074 # This option enables the implementation of the ctype functions
1075 # that comes with newlib. It is table driven and therefore
1076 # exhibits different performance characteristics. It also offers
1077 # a limited amount of binary compatibility
1078 # with newlib so that programs linked against newlib ctype/locale
1079 # do not need to be recompiled when linked with eCos.
1081 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1083 # No user value, uncomment the following line to provide one.
1085 # value_source default
1087 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1088 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1092 # Per-thread multibyte state
1093 # This option controls whether the multibyte character
1094 # handling functions mblen(), mbtowc(), and wctomb(),
1095 # have their state recorded on a per-thread
1096 # basis rather than global. If this option is
1097 # disabled, some per-thread space can be saved.
1098 # Enabling this option will use three slots
1099 # of kernel per-thread data. You should ensure you
1100 # have enough slots configured for all your
1103 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1104 # This option is not active
1105 # ActiveIf constraint: CYGPKG_KERNEL
1106 # CYGPKG_KERNEL (unknown) == 0
1110 # No user value, uncomment the following line to provide one.
1112 # value_source default
1113 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1114 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1116 # Requires: CYGVAR_KERNEL_THREADS_DATA
1117 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Size of locale name strings
1122 # This option controls the maximum size of
1123 # locale names and is used, among other things
1124 # to instantiate a static string used
1125 # as a return value from the
1126 # setlocale() function. When requesting the
1127 # current locale settings with LC_ALL, a string
1128 # must be constructed to contain this data, rather
1129 # than just returning a constant string. This
1130 # string data is stored in the static string.
1131 # This depends on the length of locale names,
1132 # hence this option. If just the C locale is
1133 # present, this option can be set as low as 2.
1135 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1137 # No user value, uncomment the following line to provide one.
1139 # value_source default
1140 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1141 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1142 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1145 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Inline versions of <ctype.h> functions
1152 # This option chooses whether the simple character
1153 # classification and conversion functions (e.g.
1154 # isupper(), isalpha(), toupper(), etc.)
1155 # from <ctype.h> are available as inline
1156 # functions. This may improve performance and as
1157 # the functions are small, may even improve code
1160 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1162 # No user value, uncomment the following line to provide one.
1164 # value_source default
1166 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1167 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1171 # C library i18n functions build options
1172 # Package specific build options including control over
1173 # compiler flags used only in building this package,
1174 # and details of which tests are built.
1176 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1177 # There is no associated value.
1181 # Additional compiler flags
1182 # This option modifies the set of compiler flags for
1183 # building the C library. These flags are used in addition
1184 # to the set of global flags.
1186 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1188 # No user value, uncomment the following line to provide one.
1189 # user_value "-fno-rtti -Woverloaded-virtual"
1190 # value_source default
1191 # Default value: "-fno-rtti -Woverloaded-virtual"
1194 # Suppressed compiler flags
1195 # This option modifies the set of compiler flags for
1196 # building the C library. These flags are removed from
1197 # the set of global flags if present.
1199 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1201 # No user value, uncomment the following line to provide one.
1202 # user_value -Wno-pointer-sign
1203 # value_source default
1204 # Default value: -Wno-pointer-sign
1207 # C library i18n function tests
1208 # This option specifies the set of tests for the C library
1211 cdl_option CYGPKG_LIBC_I18N_TESTS {
1212 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1214 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1219 # ISO C library general utility functions
1220 # doc: ref/libc.html
1221 # This package provides general utility functions in <stdlib.h>
1222 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1224 cdl_package CYGPKG_LIBC_STDLIB {
1225 # Packages cannot be added or removed, nor can their version be changed,
1226 # simply by editing their value. Instead the appropriate configuration
1227 # should be used to perform these actions.
1229 # This value cannot be modified here.
1231 # Current value: 1 current
1232 # Requires: CYGPKG_ISOINFRA
1233 # CYGPKG_ISOINFRA == current
1235 # Requires: CYGINT_ISO_CTYPE
1236 # CYGINT_ISO_CTYPE == 1
1238 # Requires: CYGINT_ISO_STRING_STRFUNCS
1239 # CYGINT_ISO_STRING_STRFUNCS == 1
1244 # Inline versions of <stdlib.h> functions
1245 # This option chooses whether some of the
1246 # particularly simple standard utility functions
1247 # from <stdlib.h> are available as inline
1248 # functions. This may improve performance, and as
1249 # the functions are small, may even improve code
1252 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1253 # There is no associated value.
1259 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1261 # No user value, uncomment the following line to provide one.
1263 # value_source default
1265 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1266 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1272 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1274 # No user value, uncomment the following line to provide one.
1276 # value_source default
1278 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1279 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1283 # atof() / atoi() / atol()
1285 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1287 # No user value, uncomment the following line to provide one.
1289 # value_source default
1291 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1292 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1297 # Random number generation
1298 # These options control the behaviour of the
1299 # functions rand(), srand() and rand_r()
1301 cdl_component CYGPKG_LIBC_RAND {
1302 # There is no associated value.
1306 # Per-thread random seed
1307 # doc: ref/libc-thread-safety.html
1308 # This option controls whether the pseudo-random
1309 # number generation functions rand() and srand()
1310 # have their state recorded on a per-thread
1311 # basis rather than global. If this option is
1312 # disabled, some per-thread space can be saved.
1313 # Note there is also a POSIX-standard rand_r()
1314 # function to achieve a similar effect with user
1315 # support. Enabling this option will use one slot
1316 # of kernel per-thread data. You should ensure you
1317 # have enough slots configured for all your
1320 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1322 # No user value, uncomment the following line to provide one.
1324 # value_source default
1326 # Requires: CYGVAR_KERNEL_THREADS_DATA
1327 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1331 # Random number seed
1332 # This selects the initial random number seed for
1333 # rand()'s pseudo-random number generator. For
1334 # strict ISO standard compliance, this should be 1,
1335 # as per section 7.10.2.2 of the standard.
1337 cdl_option CYGNUM_LIBC_RAND_SEED {
1339 # No user value, uncomment the following line to provide one.
1341 # value_source default
1343 # Legal values: 0 to 0x7fffffff
1347 # Trace verbosity level for debugging the rand(),
1348 # srand() and rand_r() functions. Increase this
1349 # value to get additional trace output.
1351 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1353 # No user value, uncomment the following line to provide one.
1355 # value_source default
1357 # Legal values: 0 to 1
1360 # Simplest implementation
1361 # This provides a very simple implementation of rand()
1362 # that does not perform well with randomness in the
1363 # lower significant bits. However it is exceptionally
1364 # fast. It uses the sample algorithm from the ISO C
1367 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1369 # No user value, uncomment the following line to provide one.
1371 # value_source default
1375 # Simple implementation #1
1376 # This provides a very simple implementation of rand()
1377 # based on the simplest implementation above. However
1378 # it does try to work around the lack of randomness
1379 # in the lower significant bits, at the expense of a
1382 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1389 # Knuth implementation #1
1390 # This implements a slightly more complex algorithm
1391 # published in Donald E. Knuth's Art of Computer
1392 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1393 # This produces better random numbers than the
1394 # simplest approach but is slower.
1396 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1405 # This option allows use of the utility function
1406 # strtod() (and consequently atof()) to convert
1407 # from string to double precision floating point
1408 # numbers. Disabling this option removes the
1409 # dependency on the math library package.
1411 cdl_option CYGFUN_LIBC_strtod {
1413 # No user value, uncomment the following line to provide one.
1415 # value_source default
1416 # Default value: 0 != CYGPKG_LIBM
1417 # CYGPKG_LIBM (unknown) == 0
1419 # Requires: CYGPKG_LIBM
1420 # CYGPKG_LIBM (unknown) == 0
1424 # Provides long long conversion functions
1425 # Enabling this option will provide support for the strtoll(),
1426 # strtoull() and atoll() conversion functions, which are
1427 # the long long variants of the standard versions of these
1428 # functions. Supporting this requires extra code and compile
1431 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1438 # bsearch() tracing level
1439 # Trace verbosity level for debugging the <stdlib.h>
1440 # binary search function bsearch(). Increase this
1441 # value to get additional trace output.
1443 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1445 # No user value, uncomment the following line to provide one.
1447 # value_source default
1449 # Legal values: 0 to 1
1452 # qsort() tracing level
1453 # Trace verbosity level for debugging the <stdlib.h>
1454 # quicksort function qsort(). Increase this value
1455 # to get additional trace output.
1457 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1459 # No user value, uncomment the following line to provide one.
1461 # value_source default
1463 # Legal values: 0 to 1
1466 # C library stdlib build options
1467 # Package specific build options including control over
1468 # compiler flags used only in building this package,
1469 # and details of which tests are built.
1471 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1472 # There is no associated value.
1476 # Additional compiler flags
1477 # This option modifies the set of compiler flags for
1478 # building this package. These flags are used in addition
1479 # to the set of global flags.
1481 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1483 # No user value, uncomment the following line to provide one.
1484 # user_value "-fno-rtti -Woverloaded-virtual"
1485 # value_source default
1486 # Default value: "-fno-rtti -Woverloaded-virtual"
1489 # Suppressed compiler flags
1490 # This option modifies the set of compiler flags for
1491 # building this package. These flags are removed from
1492 # the set of global flags if present.
1494 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1496 # No user value, uncomment the following line to provide one.
1497 # user_value -Wno-pointer-sign
1498 # value_source default
1499 # Default value: -Wno-pointer-sign
1502 # C library stdlib tests
1503 # This option specifies the set of tests for this package.
1505 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1506 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1508 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1515 # doc: ref/the-ecos-hardware-abstraction-layer.html
1516 # The eCos HAL package provide a porting layer for
1517 # higher-level parts of the system such as the kernel and the
1518 # C library. Each installation should have HAL packages for
1519 # one or more architectures, and for each architecture there
1520 # may be one or more supported platforms. It is necessary to
1521 # select one target architecture and one platform for that
1522 # architecture. There are also a number of configuration
1523 # options that are common to all HAL packages.
1525 cdl_package CYGPKG_HAL {
1526 # Packages cannot be added or removed, nor can their version be changed,
1527 # simply by editing their value. Instead the appropriate configuration
1528 # should be used to perform these actions.
1530 # This value cannot be modified here.
1532 # Current value: 1 current
1533 # Requires: CYGPKG_INFRA
1534 # CYGPKG_INFRA == current
1537 # The following properties are affected by this value
1541 # Platform-independent HAL options
1542 # A number of configuration options are common to most or all
1543 # HAL packages, for example options controlling how much state
1544 # should be saved during a context switch. The implementations
1545 # of these options will vary from architecture to architecture.
1547 cdl_component CYGPKG_HAL_COMMON {
1548 # There is no associated value.
1552 # Provide eCos kernel support
1553 # The HAL can be configured to either support the full eCos
1554 # kernel, or to support only very simple applications which do
1555 # not require a full kernel. If kernel support is not required
1556 # then some of the startup, exception, and interrupt handling
1557 # code can be eliminated.
1559 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1561 # No user value, uncomment the following line to provide one.
1563 # value_source default
1564 # Default value: CYGPKG_KERNEL
1565 # CYGPKG_KERNEL (unknown) == 0
1567 # Requires: CYGPKG_KERNEL
1568 # CYGPKG_KERNEL (unknown) == 0
1572 # HAL exception support
1573 # When a processor exception occurs, for example an attempt to
1574 # execute an illegal instruction or to perform a divide by
1575 # zero, this exception may be handled in a number of different
1576 # ways. If the target system has gdb support then typically
1577 # the exception will be handled by gdb code. Otherwise if the
1578 # HAL exception support is enabled then the HAL will invoke a
1579 # routine deliver_exception(). Typically this routine will be
1580 # provided by the eCos kernel, but it is possible for
1581 # application code to provide its own implementation. If the
1582 # HAL exception support is not enabled and a processor
1583 # exception occurs then the behaviour of the system is
1586 cdl_option CYGPKG_HAL_EXCEPTIONS {
1588 # No user value, uncomment the following line to provide one.
1590 # value_source default
1591 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1592 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1594 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1595 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Stop calling constructors early
1600 # This option supports environments where some constructors
1601 # must be run in the context of a thread rather than at
1602 # simple system startup time. A boolean flag named
1603 # cyg_hal_stop_constructors is set to 1 when constructors
1604 # should no longer be invoked. It is up to some other
1605 # package to deal with the rest of the constructors.
1606 # In the current version this is only possible with the
1609 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1611 # No user value, uncomment the following line to provide one.
1613 # value_source default
1615 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1616 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1620 # HAL uses the MMU and allows for CDL manipulation of it's use
1622 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1623 # No options implement this inferface
1624 # This value cannot be modified here.
1628 # The following properties are affected by this value
1629 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1630 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1633 # Install MMU tables.
1634 # This option controls whether this application installs
1635 # its own Memory Management Unit (MMU) tables, or relies on the
1636 # existing environment to run.
1638 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1639 # This option is not active
1640 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1641 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1645 # No user value, uncomment the following line to provide one.
1647 # value_source default
1648 # Default value: CYG_HAL_STARTUP != "RAM"
1649 # CYG_HAL_STARTUP == ROMRAM
1652 # The following properties are affected by this value
1653 # option CYGSEM_HAL_STATIC_MMU_TABLES
1654 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1657 # Use static MMU tables.
1658 # This option defines an environment where any Memory
1659 # Management Unit (MMU) tables are constant. Normally used by ROM
1660 # based environments, this provides a way to save RAM usage which
1661 # would otherwise be required for these tables.
1663 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1665 # No user value, uncomment the following line to provide one.
1667 # value_source default
1669 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1670 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1674 # Route diagnostic output to debug channel
1675 # If not inheriting the console setup from the ROM monitor,
1676 # it is possible to redirect diagnostic output to the debug
1677 # channel by enabling this option. Depending on the debugger
1678 # used it may also be necessary to select a mangler for the
1679 # output to be displayed by the debugger.
1681 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1682 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1683 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1685 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1686 # CYGPKG_HAL_ARM == current
1687 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1688 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1693 # No user value, uncomment the following line to provide one.
1695 # value_source default
1696 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1697 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1698 # CYG_HAL_STARTUP == ROMRAM
1701 # The following properties are affected by this value
1702 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1703 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1707 # Mangler used on diag output
1708 # It is sometimes necessary to mangle (encode) the
1709 # diag ASCII text output in order for it to show up at the
1710 # other end. In particular, GDB may silently ignore raw
1713 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1714 # This option is not active
1715 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1718 # No user value, uncomment the following line to provide one.
1720 # value_source default
1721 # Default value: GDB
1722 # Legal values: "GDB" "None"
1727 # HAL interrupt handling
1728 # A number of configuration options related to interrupt
1729 # handling are common to most or all HAL packages, even though
1730 # the implementations will vary from architecture to
1733 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1734 # There is no associated value.
1738 # Use separate stack for interrupts
1739 # When an interrupt occurs this interrupt can be handled either
1740 # on the current stack or on a separate stack maintained by the
1741 # HAL. Using a separate stack requires a small number of extra
1742 # instructions in the interrupt handling code, but it has the
1743 # advantage that it is no longer necessary to allow extra space
1744 # in every thread stack for the interrupt handlers. The amount
1745 # of extra space required depends on the interrupt handlers
1746 # that are being used.
1748 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1750 # No user value, uncomment the following line to provide one.
1752 # The inferred value should not be edited directly.
1754 # value_source inferred
1757 # The following properties are affected by this value
1758 # package CYGPKG_REDBOOT
1759 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1762 # Interrupt stack size
1763 # This configuration option specifies the stack size in bytes
1764 # for the interrupt stack. Typically this should be a multiple
1765 # of 16, but the exact requirements will vary from architecture
1766 # to architecture. The interrupt stack serves two separate
1767 # purposes. It is used as the stack during system
1768 # initialization. In addition, if the interrupt system is
1769 # configured to use a separate stack then all interrupts will
1770 # be processed on this stack. The exact memory requirements
1771 # will vary from application to application, and will depend
1772 # heavily on whether or not other interrupt-related options,
1773 # for example nested interrupts, are enabled. On most targets,
1774 # in a configuration with no kernel this stack will also be
1775 # the stack used to invoke the application, and must obviously
1776 # be appropriately large in that case.
1778 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1780 # No user value, uncomment the following line to provide one.
1782 # value_source default
1783 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1784 # CYGPKG_KERNEL (unknown) == 0
1786 # Legal values: 128 to 1048576
1789 # Allow nested interrupts
1790 # When an interrupt occurs the HAL interrupt handling code can
1791 # either leave interrupts disabled for the duration of the
1792 # interrupt handling code, or by doing some extra work it can
1793 # reenable interrupts before invoking the interrupt handler and
1794 # thus allow nested interrupts to happen. If all the interrupt
1795 # handlers being used are small and do not involve any loops
1796 # then it is usually better to disallow nested interrupts.
1797 # However if any of the interrupt handlers are more complicated
1798 # than nested interrupts will usually be required.
1800 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1802 # No user value, uncomment the following line to provide one.
1804 # value_source default
1808 # Save minimum context on interrupt
1809 # The HAL interrupt handling code can exploit the calling conventions
1810 # defined for a given architecture to reduce the amount of state
1811 # that has to be saved. Generally this improves performance and
1812 # reduces code size. However it can make source-level debugging
1815 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1817 # No user value, uncomment the following line to provide one.
1819 # The inferred value should not be edited directly.
1821 # value_source inferred
1824 # The following properties are affected by this value
1825 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1826 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1827 # component CYGBLD_BUILD_REDBOOT
1828 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1831 # Chain all interrupts together
1832 # Interrupts can be attached to vectors either singly, or be
1833 # chained together. The latter is necessary if there is no way
1834 # of discovering which device has interrupted without
1835 # inspecting the device itself. It can also reduce the amount
1836 # of RAM needed for interrupt decoding tables and code.
1838 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1840 # No user value, uncomment the following line to provide one.
1842 # value_source default
1846 # Ignore spurious [fleeting] interrupts
1847 # On some hardware, interrupt sources may not be de-bounced or
1848 # de-glitched. Rather than try to handle these interrupts (no
1849 # handling may be possible), this option allows the HAL to simply
1850 # ignore them. In most cases, if the interrupt is real it will
1851 # reoccur in a detectable form.
1853 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1855 # No user value, uncomment the following line to provide one.
1857 # value_source default
1862 # HAL context switch support
1863 # A number of configuration options related to thread contexts
1864 # are common to most or all HAL packages, even though the
1865 # implementations will vary from architecture to architecture.
1867 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1868 # There is no associated value.
1870 # The following properties are affected by this value
1874 # Use minimum thread context
1875 # The thread context switch code can exploit the calling
1876 # conventions defined for a given architecture to reduce the
1877 # amount of state that has to be saved during a context
1878 # switch. Generally this improves performance and reduces
1879 # code size. However it can make source-level debugging more
1882 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1884 # No user value, uncomment the following line to provide one.
1886 # The inferred value should not be edited directly.
1888 # value_source inferred
1891 # The following properties are affected by this value
1892 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1893 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1894 # component CYGBLD_BUILD_REDBOOT
1895 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # Explicit control over cache behaviour
1900 # These options let the default behaviour of the caches
1901 # be easily configurable.
1903 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1904 # There is no associated value.
1908 # Enable DATA cache on startup
1909 # Enabling this option will cause the data cache to be enabled
1910 # as soon as practicable when eCos starts up. One would choose
1911 # to disable this if the data cache cannot safely be turned on,
1912 # such as a case where the cache(s) require additional platform
1915 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1917 # No user value, uncomment the following line to provide one.
1919 # value_source default
1924 # DATA cache mode on startup
1925 # This option controls the mode the cache will be set to
1926 # when enabled on startup.
1928 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1930 # No user value, uncomment the following line to provide one.
1931 # user_value COPYBACK
1932 # value_source default
1933 # Default value: COPYBACK
1934 # Legal values: "COPYBACK" "WRITETHRU"
1938 # Enable INSTRUCTION cache on startup
1939 # Enabling this option will cause the instruction cache to be enabled
1940 # as soon as practicable when eCos starts up. One would choose
1941 # to disable this if the instruction cache cannot safely be turned on,
1942 # such as a case where the cache(s) require additional platform
1945 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1947 # No user value, uncomment the following line to provide one.
1949 # value_source default
1954 # Source-level debugging support
1955 # If the source level debugger gdb is to be used for debugging
1956 # application code then it may be necessary to configure in support
1957 # for this in the HAL.
1959 cdl_component CYGPKG_HAL_DEBUG {
1960 # There is no associated value.
1964 # Support for GDB stubs
1965 # The HAL implements GDB stubs for the target.
1967 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1968 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1969 # This value cannot be modified here.
1973 # The following properties are affected by this value
1974 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1975 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1976 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1977 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1980 # Include GDB stubs in HAL
1981 # This option causes a set of GDB stubs to be included into the
1982 # system. On some target systems the GDB support will be
1983 # provided by other means, for example by a ROM monitor. On
1984 # other targets, especially when building a ROM-booting system,
1985 # the necessary support has to go into the target library
1986 # itself. When GDB stubs are include in a configuration, HAL
1987 # serial drivers must also be included.
1989 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1990 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1991 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1995 # No user value, uncomment the following line to provide one.
1997 # The inferred value should not be edited directly.
1999 # value_source inferred
2001 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2002 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2004 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2005 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2007 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2008 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2010 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2011 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2015 # The following properties are affected by this value
2016 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2017 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2018 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2020 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2021 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2022 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2023 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2024 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2025 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2027 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2029 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGPKG_HAL_GDB_FILEIO
2031 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2033 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # Support for external break support in GDB stubs
2041 # The HAL implements external break (or asynchronous interrupt)
2042 # in the GDB stubs for the target.
2044 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2045 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2046 # This value cannot be modified here.
2050 # The following properties are affected by this value
2051 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2052 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2055 # Include GDB external break support for stubs
2056 # This option causes the GDB stub to add a serial interrupt handler
2057 # which will listen for GDB break packets. This lets you stop the
2058 # target asynchronously when using GDB, usually by hitting Control+C
2059 # or pressing the STOP button. This option differs from
2060 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2061 # GDB stubs are present.
2063 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2064 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2065 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2069 # No user value, uncomment the following line to provide one.
2071 # value_source default
2072 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2073 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2075 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2076 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2079 # The following properties are affected by this value
2080 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2081 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2082 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2083 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2084 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2085 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # Platform does not support CTRLC
2090 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2091 # No options implement this inferface
2092 # This value cannot be modified here.
2096 # The following properties are affected by this value
2097 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2098 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # Include GDB external break support when no stubs
2102 # This option adds an interrupt handler for the GDB serial line
2103 # which will listen for GDB break packets. This lets you stop the
2104 # target asynchronously when using GDB, usually by hitting Control+C
2105 # or pressing the STOP button. This option differs from
2106 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2107 # stubs are NOT present.
2109 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2110 # This option is not active
2111 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2112 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2113 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2115 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2116 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2120 # No user value, uncomment the following line to provide one.
2122 # value_source default
2123 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2124 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2126 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2127 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2130 # The following properties are affected by this value
2131 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2132 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # component CYGBLD_BUILD_REDBOOT
2134 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2137 # Include GDB multi-threading debug support
2138 # This option enables some extra HAL code which is needed
2139 # to support multi-threaded source level debugging.
2141 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2142 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2143 # CYGSEM_HAL_ROM_MONITOR == 1
2144 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2148 # No user value, uncomment the following line to provide one.
2150 # value_source default
2153 # The following properties are affected by this value
2154 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2155 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2156 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2157 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2160 # Number of times to retry sending a $O packet
2161 # This option controls the number of attempts that eCos programs
2162 # will make to send a $O packet to a host GDB process. If it is
2163 # set non-zero, then the target process will attempt to resend the
2164 # $O packet data up to this number of retries. Caution: use of
2165 # this option is not recommended as it can thoroughly confuse the
2168 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2170 # No user value, uncomment the following line to provide one.
2172 # value_source default
2176 # Timeout period for GDB packets
2177 # This option controls the time (in milliseconds) that eCos programs
2178 # will wait for a response when sending packets to a host GDB process.
2179 # If this time elapses, then the packet will be resent, up to some
2180 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2182 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2184 # No user value, uncomment the following line to provide one.
2186 # value_source default
2187 # Default value: 500
2190 # Location of CRC32 table
2191 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2192 # and placed in ROM, or generated at runtime in RAM. Depending on
2193 # your memory constraints, one of these options may be better.
2195 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2197 # No user value, uncomment the following line to provide one.
2199 # value_source default
2200 # Default value: RAM
2201 # Legal values: "ROM" "RAM"
2205 # ROM monitor support
2206 # Support for ROM monitors can be built in to your application.
2207 # It may also be relevant to build your application as a ROM monitor
2208 # itself. Such options are contained here if relevant for your chosen
2209 # platform. The options and ROM monitors available to choose are
2210 # platform-dependent.
2212 cdl_component CYGPKG_HAL_ROM_MONITOR {
2213 # There is no associated value.
2215 # The following properties are affected by this value
2219 # Target has virtual vector support
2221 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2222 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2223 # This value cannot be modified here.
2227 # The following properties are affected by this value
2228 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2229 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2232 # Target supports baud rate control via vectors
2233 # Whether this target supports the __COMMCTL_GETBAUD
2234 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2236 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2237 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2238 # This value cannot be modified here.
2242 # The following properties are affected by this value
2243 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2244 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2247 # Enable use of virtual vector calling interface
2248 # Virtual vector support allows the HAL to let the ROM
2249 # monitor handle certain operations. The virtual vector table
2250 # defines a calling interface between applications running in
2251 # RAM and the ROM monitor.
2253 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2254 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2255 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2258 # Calculated value: 1
2262 # The following properties are affected by this value
2263 # component CYGBLD_BUILD_REDBOOT
2264 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2265 # package CYGPKG_DEVS_ETH_PHY
2266 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # Inherit console settings from ROM monitor
2271 # When this option is set, the application will inherit
2272 # the console as set up by the ROM monitor. This means
2273 # that the application will use whatever channel and
2274 # mangling style was used by the ROM monitor when
2275 # the application was launched.
2277 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2278 # This option is not active
2279 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2280 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2284 # No user value, uncomment the following line to provide one.
2286 # value_source default
2287 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2288 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2291 # The following properties are affected by this value
2292 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2293 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2294 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2295 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # Debug channel is configurable
2299 # This option is a configuration hint - it is enabled
2300 # when the HAL initialization code will make use
2301 # of the debug channel configuration option.
2303 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2304 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2305 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2309 # The following properties are affected by this value
2310 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2311 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2314 # Console channel is configurable
2315 # This option is a configuration hint - it is enabled
2316 # when the HAL initialization code will make use
2317 # of the console channel configuration option.
2319 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2320 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2321 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2322 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2326 # The following properties are affected by this value
2327 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2328 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2331 # Initialize whole of virtual vector table
2332 # This option will cause the whole of the virtual
2333 # vector table to be initialized with dummy values on
2334 # startup. When this option is enabled, all the
2335 # options below must also be enabled - or the
2336 # table would be empty when the application
2338 # On targets where older ROM monitors without
2339 # virtual vector support may still be in use, it is
2340 # necessary for RAM applictions to initialize the
2341 # table (since all HAL diagnostics and debug IO
2342 # happens via the table).
2344 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2346 # No user value, uncomment the following line to provide one.
2348 # value_source default
2349 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2350 # CYG_HAL_STARTUP == ROMRAM
2351 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2353 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2356 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2357 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2369 # The following properties are affected by this value
2370 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2371 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2372 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2373 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2374 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2375 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2377 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2386 # Claim virtual vector table entries by default
2387 # By default most virtual vectors will be claimed by
2388 # RAM startup configurations, meaning that the RAM
2389 # application will provide the services. The
2390 # exception is COMMS support (HAL
2391 # diagnostics/debugging IO) which is left in the
2392 # control of the ROM monitor.
2393 # The reasoning behind this is to get as much of the
2394 # code exercised during regular development so it
2395 # is known to be working the few times a new ROM
2396 # monitor or a ROM production configuration is used
2397 # - COMMS are excluded only by necessity in order to
2398 # avoid breaking an existing debugger connections
2399 # (there may be ways around this).
2400 # For production RAM configurations this option can
2401 # be switched off, causing the appliction to rely on
2402 # the ROM monitor for these services, thus
2403 # saving some space.
2404 # Individual vectors may also be left unclaimed,
2405 # controlled by the below options (meaning that the
2406 # associated service provided by the ROM monitor
2409 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2410 # This option is not active
2411 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2412 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2416 # No user value, uncomment the following line to provide one.
2418 # value_source default
2421 # The following properties are affected by this value
2422 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2423 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2424 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2425 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2426 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2427 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # Claim reset virtual vectors
2433 # This option will cause the reset and kill_by_reset
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2446 # The following properties are affected by this value
2447 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2448 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2451 # Claim version virtual vectors
2452 # This option will cause the version
2453 # virtual vectors to be claimed.
2455 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2457 # No user value, uncomment the following line to provide one.
2459 # value_source default
2460 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2461 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2465 # Claim delay_us virtual vector
2466 # This option will cause the delay_us
2467 # virtual vector to be claimed.
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2484 # Claim cache virtual vectors
2485 # This option will cause the cache virtual vectors
2488 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2490 # No user value, uncomment the following line to provide one.
2492 # value_source default
2493 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2494 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2498 # The following properties are affected by this value
2499 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2500 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2503 # Claim data virtual vectors
2504 # This option will cause the data virtual vectors
2505 # to be claimed. At present there is only one, used
2506 # by the RedBoot ethernet driver to share diag output.
2508 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2510 # No user value, uncomment the following line to provide one.
2512 # value_source default
2513 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2514 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2518 # The following properties are affected by this value
2519 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2520 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2523 # Claim comms virtual vectors
2524 # This option will cause the communication tables
2525 # that are part of the virtual vectors mechanism to
2526 # be claimed. Note that doing this may cause an
2527 # existing ROM monitor communication connection to
2528 # be closed. For this reason, the option is disabled
2529 # per default for normal application
2532 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2534 # No user value, uncomment the following line to provide one.
2536 # value_source default
2537 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2538 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2539 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2542 # The following properties are affected by this value
2543 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2545 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2546 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2547 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2548 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2549 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2550 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # Do diagnostic IO via virtual vector table
2554 # All HAL IO happens via the virtual vector table / comm
2555 # tables when those tables are supported by the HAL.
2556 # If so desired, the low-level IO functions can
2557 # still be provided by the RAM application by
2558 # enabling the CLAIM_COMMS option.
2560 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2561 # Calculated value: 1
2565 # The following properties are affected by this value
2566 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2567 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2568 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2569 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2573 # Behave as a ROM monitor
2574 # Enable this option if this program is to be used as a ROM monitor,
2575 # i.e. applications will be loaded into RAM on the TX53 module, and this
2576 # ROM monitor may process exceptions or interrupts generated from the
2577 # application. This enables features such as utilizing a separate
2578 # interrupt stack when exceptions are generated.
2580 cdl_option CYGSEM_HAL_ROM_MONITOR {
2582 # No user value, uncomment the following line to provide one.
2584 # The inferred value should not be edited directly.
2586 # value_source inferred
2588 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2589 # CYG_HAL_STARTUP == ROMRAM
2590 # CYG_HAL_STARTUP == ROMRAM
2593 # The following properties are affected by this value
2594 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2595 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2596 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2597 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2598 # option CYGPRI_REDBOOT_ROM_MONITOR
2599 # Requires: CYGSEM_HAL_ROM_MONITOR
2602 # Work with a ROM monitor
2603 # Support can be enabled for different varieties of ROM monitor.
2604 # This support changes various eCos semantics such as the encoding
2605 # of diagnostic output, or the overriding of hardware interrupt
2607 # Firstly there is "Generic" support which prevents the HAL
2608 # from overriding the hardware vectors that it does not use, to
2609 # instead allow an installed ROM monitor to handle them. This is
2610 # the most basic support which is likely to be common to most
2611 # implementations of ROM monitor.
2612 # "GDB_stubs" provides support when GDB stubs are included in
2613 # the ROM monitor or boot ROM.
2615 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2617 # No user value, uncomment the following line to provide one.
2619 # value_source default
2620 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2621 # CYG_HAL_STARTUP == ROMRAM
2623 # Legal values: "Generic" "GDB_stubs"
2624 # Requires: CYG_HAL_STARTUP == "RAM"
2625 # CYG_HAL_STARTUP == ROMRAM
2628 # The following properties are affected by this value
2629 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2630 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2631 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2632 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2633 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2634 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2635 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2636 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2640 # Platform defined I/O channels.
2641 # Platforms which provide additional I/O channels can implement
2642 # this interface, indicating that the function plf_if_init()
2643 # needs to be called.
2645 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2646 # No options implement this inferface
2647 # This value cannot be modified here.
2652 # Platform IDE I/O support.
2653 # Platforms which provide IDE controllers can implement
2654 # this interface, indicating that IDE I/O macros are
2657 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2658 # No options implement this inferface
2659 # This value cannot be modified here.
2663 # The following properties are affected by this value
2664 # component CYGSEM_REDBOOT_DISK_IDE
2665 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2668 # File I/O operations via GDB
2669 # This option enables support for various file I/O
2670 # operations using the GDB remote protocol to communicate
2671 # with GDB. The operations are then performed on the
2672 # debugging host by proxy. These operations are only
2673 # currently available by using a system call interface
2674 # to RedBoot. This may change in the future.
2676 cdl_option CYGPKG_HAL_GDB_FILEIO {
2677 # This option is not active
2678 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2679 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2683 # No user value, uncomment the following line to provide one.
2685 # value_source default
2687 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2688 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2692 # Build Compiler sanity checking tests
2693 # Enabling this option causes compiler tests to be built.
2695 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2697 # No user value, uncomment the following line to provide one.
2699 # value_source default
2702 # The following properties are affected by this value
2703 # component CYGPKG_HAL_TESTS
2704 # Calculated: "tests/context tests/basic"
2705 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2706 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2707 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2711 # This option specifies the set of tests for the common HAL.
2713 cdl_component CYGPKG_HAL_TESTS {
2714 # Calculated value: "tests/context tests/basic"
2715 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2716 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2717 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2718 # CYGINT_HAL_TESTS_NO_CACHES == 0
2719 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2720 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2722 # Current_value: tests/context tests/basic tests/cache tests/intr
2726 # Interface for cache presence
2727 # Some architectures and/or platforms do not have caches. By
2728 # implementing this interface, these can disable the various
2729 # cache-related tests.
2731 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2732 # No options implement this inferface
2733 # This value cannot be modified here.
2735 # Current value: 0 0
2737 # The following properties are affected by this value
2738 # component CYGPKG_HAL_TESTS
2739 # Calculated: "tests/context tests/basic"
2740 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2741 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2742 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2747 # The ARM architecture HAL package provides generic
2748 # support for this processor architecture. It is also
2749 # necessary to select a specific target platform HAL
2752 cdl_package CYGPKG_HAL_ARM {
2753 # Packages cannot be added or removed, nor can their version be changed,
2754 # simply by editing their value. Instead the appropriate configuration
2755 # should be used to perform these actions.
2757 # This value cannot be modified here.
2759 # Current value: 1 current
2761 # The following properties are affected by this value
2762 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2763 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2764 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2765 # ActiveIf: CYGPKG_HAL_ARM
2769 # The CPU architecture supports THUMB mode
2771 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2772 # No options implement this inferface
2773 # This value cannot be modified here.
2777 # The following properties are affected by this value
2778 # option CYGHWR_THUMB
2779 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2780 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2781 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2784 # Enable Thumb instruction set
2785 # Enable use of the Thumb instruction set.
2787 cdl_option CYGHWR_THUMB {
2788 # This option is not active
2789 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2794 # No user value, uncomment the following line to provide one.
2796 # value_source default
2799 # The following properties are affected by this value
2800 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2801 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2804 # Enable Thumb interworking compiler option
2805 # This option controls the use of -mthumb-interwork in the
2806 # compiler flags. It defaults enabled in Thumb or ROM monitor
2807 # configurations, but can be overridden for reduced memory
2808 # footprint where interworking is not a requirement.
2810 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2811 # This option is not active
2812 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2813 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2820 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2822 # CYGSEM_HAL_ROM_MONITOR == 1
2826 # The platform and architecture supports Big Endian operation
2828 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2829 # No options implement this inferface
2830 # This value cannot be modified here.
2834 # The following properties are affected by this value
2835 # option CYGHWR_HAL_ARM_BIGENDIAN
2836 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2839 # Use big-endian mode
2840 # Use the CPU in big-endian mode.
2842 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2843 # This option is not active
2844 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2845 # CYGINT_HAL_ARM_BIGENDIAN == 0
2849 # No user value, uncomment the following line to provide one.
2851 # value_source default
2855 # The platform uses a processor with an ARM7 core
2857 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_CPU_FAMILY
2865 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2866 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2867 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2868 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2870 # option CYGHWR_HAL_ARM_CPU_FAMILY
2871 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2872 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2873 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2874 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2878 # The platform uses a processor with an ARM9 core
2880 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2881 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2882 # This value cannot be modified here.
2886 # The following properties are affected by this value
2887 # option CYGHWR_HAL_ARM_CPU_FAMILY
2888 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2889 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2890 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2891 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2901 # The platform uses a processor with a StrongARM core
2903 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2904 # No options implement this inferface
2905 # This value cannot be modified here.
2909 # The following properties are affected by this value
2910 # option CYGHWR_HAL_ARM_CPU_FAMILY
2911 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2912 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2913 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2914 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2924 # The platform uses a processor with a XScale core
2926 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2927 # No options implement this inferface
2928 # This value cannot be modified here.
2932 # The following properties are affected by this value
2933 # option CYGHWR_HAL_ARM_CPU_FAMILY
2934 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2935 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2936 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2937 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2948 # It is possible to optimize code for different
2949 # ARM CPU families. This option selects which CPU to
2950 # optimize for on boards that support multiple CPU types.
2952 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2954 # No user value, uncomment the following line to provide one.
2956 # value_source default
2957 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2958 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2959 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2960 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2962 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2963 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2964 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2965 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2967 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2968 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2969 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2970 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2972 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2973 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2974 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2975 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2978 # Provide diagnostic dump for exceptions
2979 # Print messages about hardware exceptions, including
2980 # raw exception frame dump and register contents.
2982 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2988 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2989 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2993 # Process all exceptions with the eCos application
2994 # Normal RAM-based programs which do not include GDB stubs
2995 # defer processing of the illegal instruction exception to GDB.
2996 # Setting this options allows the program to explicitly handle
2997 # the illegal instruction exception itself. Note: this will
2998 # prevent the use of GDB to debug the application as breakpoints
2999 # will no longer work.
3001 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3003 # No user value, uncomment the following line to provide one.
3005 # value_source default
3009 # Support GDB thread operations via ICE/Multi-ICE
3010 # Allow GDB to get thread information via the ICE/Multi-ICE
3013 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3015 # No user value, uncomment the following line to provide one.
3017 # value_source default
3019 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3020 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3023 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3025 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3026 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3030 # Support for 'gprof' callbacks
3031 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3032 # to acquire the interrupt-context PC and SP, when this option is
3035 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3036 # This option is not active
3037 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3038 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3040 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3042 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3045 # Calculated value: 1
3050 # Accept exceptions and irq's occurring in user mode
3051 # For standalone Redboot based programs running in user mode.
3053 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3055 # No user value, uncomment the following line to provide one.
3057 # value_source default
3061 # Preserve svc spsr before returning to svc mode
3062 # This option secures exception and breakpoint processing
3063 # triggered during execution of application specific SWI
3066 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3068 # No user value, uncomment the following line to provide one.
3070 # value_source default
3076 cdl_option CYGBLD_LINKER_SCRIPT {
3077 # Calculated value: "src/arm.ld"
3079 # Current_value: src/arm.ld
3082 # Implementations of hal_arm_mem_real_region_top()
3084 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3085 # No options implement this inferface
3086 # This value cannot be modified here.
3091 # Freescale SoC architecture
3092 # This HAL variant package provides generic
3093 # support for the Freescale SoC. It is also
3094 # necessary to select a specific target platform HAL
3097 cdl_package CYGPKG_HAL_ARM_MX53 {
3098 # Packages cannot be added or removed, nor can their version be changed,
3099 # simply by editing their value. Instead the appropriate configuration
3100 # should be used to perform these actions.
3102 # This value cannot be modified here.
3104 # Current value: 1 current
3106 # The following properties are affected by this value
3107 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3108 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3109 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3110 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3111 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3115 # Processor clock rate
3116 # The processor can run at various frequencies.
3117 # These values are expressed in KHz. Note that there are
3118 # several steppings of the rate to run at different
3119 # maximum frequencies. Check the specs to make sure that your
3120 # particular processor can run at the rate you select here.
3122 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3123 # This option is not active
3124 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3125 # CYG_HAL_STARTUP == ROMRAM
3129 # No user value, uncomment the following line to provide one.
3131 # value_source default
3132 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3133 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3134 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3135 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3137 # Legal values: 150000 200000
3140 # Real-time clock constants
3142 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3143 # There is no associated value.
3147 # Real-time clock numerator
3149 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3150 # Calculated value: 1000000000
3152 # Current_value: 1000000000
3155 # Real-time clock denominator
3156 # This option selects the heartbeat rate for the real-time clock.
3157 # The rate is specified in ticks per second. Change this value
3158 # with caution - too high and your system will become saturated
3159 # just handling clock interrupts, too low and some operations
3160 # such as thread scheduling may become sluggish.
3162 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3164 # No user value, uncomment the following line to provide one.
3166 # value_source default
3167 # Default value: 100
3169 # The following properties are affected by this value
3170 # option CYGNUM_HAL_RTC_PERIOD
3171 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3174 # Real-time clock period
3176 cdl_option CYGNUM_HAL_RTC_PERIOD {
3177 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3178 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3180 # Current_value: 36864
3184 # UART1 available as diagnostic/debug channel
3185 # The chip has multiple serial channels which may be
3186 # used for different things on different platforms. This
3187 # interface allows a platform to indicate that the specified
3188 # serial port can be used as a diagnostic and/or debug channel.
3190 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3191 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3192 # This value cannot be modified here.
3196 # The following properties are affected by this value
3199 # UART2 available as diagnostic/debug channel
3200 # The chip has multiple serial channels which may be
3201 # used for different things on different platforms. This
3202 # interface allows a platform to indicate that the specified
3203 # serial port can be used as a diagnostic and/or debug channel.
3205 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3206 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3207 # This value cannot be modified here.
3211 # The following properties are affected by this value
3214 # UART3 available as diagnostic/debug channel
3215 # The chip has multiple serial channels which may be
3216 # used for different things on different platforms. This
3217 # interface allows a platform to indicate that the specified
3218 # serial port can be used as a diagnostic and/or debug channel.
3220 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3221 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3222 # This value cannot be modified here.
3226 # The following properties are affected by this value
3229 # UART4 available as diagnostic/debug channel
3230 # The chip has multiple serial channels which may be
3231 # used for different things on different platforms. This
3232 # interface allows a platform to indicate that the specified
3233 # serial port can be used as a diagnostic and/or debug channel.
3235 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3236 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3237 # This value cannot be modified here.
3241 # The following properties are affected by this value
3244 # UART5 available as diagnostic/debug channel
3245 # The chip has multiple serial channels which may be
3246 # used for different things on different platforms. This
3247 # interface allows a platform to indicate that the specified
3248 # serial port can be used as a diagnostic and/or debug channel.
3250 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3251 # No options implement this inferface
3252 # This value cannot be modified here.
3258 # This HAL platform package provides generic
3259 # support for the Ka-Ro electronics TX53 module.
3261 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3262 # Packages cannot be added or removed, nor can their version be changed,
3263 # simply by editing their value. Instead the appropriate configuration
3264 # should be used to perform these actions.
3266 # This value cannot be modified here.
3268 # Current value: 1 current
3269 # Requires: CYGINT_ISO_CTYPE
3270 # CYGINT_ISO_CTYPE == 1
3272 # Requires: CYGBLD_BUILD_REDBOOT == 1
3273 # CYGBLD_BUILD_REDBOOT == 1
3279 # The only startup type allowed is ROMRAM, since this will allow
3280 # the program to exist in ROM, but be copied to RAM during startup
3281 # which is required to boot from NAND flash.
3283 cdl_component CYG_HAL_STARTUP {
3285 # No user value, uncomment the following line to provide one.
3287 # value_source default
3288 # Default value: ROMRAM
3289 # Legal values: "ROMRAM" "RAM"
3291 # The following properties are affected by this value
3292 # option CYGSEM_HAL_ROM_MONITOR
3293 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3294 # option CYGSEM_HAL_ROM_MONITOR
3295 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3296 # option CYGSEM_HAL_USE_ROM_MONITOR
3297 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3298 # option CYGSEM_HAL_USE_ROM_MONITOR
3299 # Requires: CYG_HAL_STARTUP == "RAM"
3300 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3301 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3302 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3303 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3304 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3305 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3306 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3307 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3308 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3309 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3310 # option CYGPRI_REDBOOT_ROM_MONITOR
3311 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3312 # option CYGPRI_REDBOOT_ROM_MONITOR
3313 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3316 # Diagnostic serial port baud rate
3317 # This option selects the baud rate used for the console port.
3318 # Note: this should match the value chosen for the GDB port if the
3319 # console and GDB port are the same.
3321 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3323 # No user value, uncomment the following line to provide one.
3325 # value_source default
3326 # Default value: 115200
3327 # Legal values: 9600 19200 38400 57600 115200
3330 # GDB serial port baud rate
3331 # This option selects the baud rate used for the GDB port.
3332 # Note: this should match the value chosen for the console port if the
3333 # console and GDB port are the same.
3335 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3337 # No user value, uncomment the following line to provide one.
3339 # value_source default
3340 # Default value: 115200
3341 # Legal values: 9600 19200 38400 57600 115200
3344 # Number of communication channels on the TX53
3346 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3347 # Calculated value: 5
3351 # The following properties are affected by this value
3352 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3353 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3354 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3355 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3356 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3357 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3361 # The TX53 provides access to five serial ports. This option
3362 # chooses which port will be used to connect to a host
3365 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3366 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3367 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3371 # No user value, uncomment the following line to provide one.
3373 # value_source default
3375 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3379 # Default console channel.
3381 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3382 # Calculated value: 0
3385 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3386 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3388 # The following properties are affected by this value
3389 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3390 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3393 # Console serial port
3394 # The TX53 provides access to three serial ports. This option
3395 # chooses which port will be used for console output.
3397 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3398 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3399 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3403 # No user value, uncomment the following line to provide one.
3405 # value_source default
3406 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3409 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3410 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3413 # Ka-Ro electronics TX53 module build options
3414 # Package specific build options including control over
3415 # compiler flags used only in building this package,
3416 # and details of which tests are built.
3418 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3419 # There is no associated value.
3420 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3421 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3427 # This option specifies the SDRAM type of the TX53 module.
3428 # Valid options are '2' for DDR2 and '3' for DDR3.
3430 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_TYPE {
3437 # The following properties are affected by this value
3438 # component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS
3439 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3440 # component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS
3441 # ActiveIf: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3445 # This option specifies the SDRAM size of the TX53 module.
3447 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3449 user_value 0x40000000
3451 # Default value: 0x20000000
3452 # Legal values: 0x40000000 0x20000000
3456 # This option specifies the CPU clock in MHz of the TX51 module.
3458 cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK {
3462 # Default value: 1000
3463 # Legal values: 800 1000
3466 # Enable low level debugging with LED
3467 # This option enables low level debugging by blink codes
3468 # of the LED on STK5.
3470 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3472 # No user value, uncomment the following line to provide one.
3474 # value_source default
3475 # Default value: false
3476 # false (unknown) == 0
3480 # Additional compiler flags
3481 # This option modifies the set of compiler flags for
3482 # building the TX53 HAL. These flags are used in addition
3483 # to the set of global flags.
3485 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3487 # No user value, uncomment the following line to provide one.
3489 # value_source default
3493 # Suppressed compiler flags
3494 # This option modifies the set of compiler flags for
3495 # building the TX53 HAL. These flags are removed from
3496 # the set of global flags if present.
3498 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3500 # No user value, uncomment the following line to provide one.
3502 # value_source default
3506 # Show a splash screen from the FIS partition: 'logo'
3507 # When this option is enabled, RedBoot will look for a flash partition
3508 # named 'logo' and display the contents of this partition as initial
3511 cdl_option CYGHWR_MX53_LCD_LOGO {
3512 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3513 # CYGPKG_DEVS_IMX_IPU == current
3517 # No user value, uncomment the following line to provide one.
3519 # value_source default
3524 # Options for DDR2 SDRAM
3526 cdl_component CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS {
3527 # This option is not active
3528 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 2
3529 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3532 # There is no associated value.
3537 # This option specifies the SDRAM clock im MHz of the TX53 module.
3539 cdl_option CYGNUM_HAL_ARM_TX53_DDR2_CLK {
3540 # This option is not active
3541 # The parent CYGHWR_HAL_ARM_TX53_DDR2_OPTIONS is not active
3544 # No user value, uncomment the following line to provide one.
3546 # value_source default
3547 # Default value: 400
3548 # Legal values: 216 266 333 400
3552 # Options for DDR3 SDRAM
3554 cdl_component CYGHWR_HAL_ARM_TX53_DDR3_OPTIONS {
3555 # ActiveIf constraint: CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3556 # CYGNUM_HAL_ARM_TX53_SDRAM_TYPE == 3
3559 # There is no associated value.
3564 # This option specifies the SDRAM clock im MHz of the TX53 module.
3566 cdl_option CYGNUM_HAL_ARM_TX53_DDR3_CLK {
3568 # No user value, uncomment the following line to provide one.
3570 # value_source default
3571 # Default value: 333
3578 cdl_component CYGHWR_MEMORY_LAYOUT {
3579 # Calculated value: "arm_tx53_romram"
3581 # Current_value: arm_tx53_romram
3585 # Memory layout linker script fragment
3587 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3588 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3590 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3593 # Memory layout header file
3595 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3596 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3598 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3607 # Common types and useful macros.
3608 # Tracing and assertion facilities.
3609 # Package startup options.
3611 cdl_package CYGPKG_INFRA {
3612 # Packages cannot be added or removed, nor can their version be changed,
3613 # simply by editing their value. Instead the appropriate configuration
3614 # should be used to perform these actions.
3616 # This value cannot be modified here.
3618 # Current value: 1 current
3620 # The following properties are affected by this value
3621 # package CYGPKG_HAL
3622 # Requires: CYGPKG_INFRA
3623 # component CYGBLD_BUILD_REDBOOT
3624 # Requires: CYGPKG_INFRA
3629 # The eCos source code contains a significant amount of
3630 # internal debugging support, in the form of assertions and
3632 # Assertions check at runtime that various conditions are as
3633 # expected; if not, execution is halted.
3634 # Tracing takes the form of text messages that are output
3635 # whenever certain events occur, or whenever functions are
3637 # The most important property of these checks and messages is
3638 # that they are not required for the program to run.
3639 # It is prudent to develop software with assertions enabled,
3640 # but disable them when making a product release, thus
3641 # removing the overhead of that checking.
3642 # It is possible to enable assertions and tracing
3644 # There are also options controlling the exact behaviour of
3645 # the assertion and tracing facilities, thus giving users
3646 # finer control over the code and data size requirements.
3648 cdl_component CYGPKG_INFRA_DEBUG {
3650 # No user value, uncomment the following line to provide one.
3652 # value_source default
3655 # The following properties are affected by this value
3656 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3657 # ActiveIf: CYGPKG_INFRA_DEBUG
3662 # If this option is defined, asserts in the code are tested.
3663 # Assert functions (CYG_ASSERT()) are defined in
3664 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3665 # If it is not defined, these result in no additional
3666 # object code and no checking of the asserted conditions.
3668 cdl_component CYGDBG_USE_ASSERTS {
3669 # This option is not active
3670 # The parent CYGPKG_INFRA_DEBUG is disabled
3673 # No user value, uncomment the following line to provide one.
3675 # value_source default
3677 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3678 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3681 # The following properties are affected by this value
3682 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3683 # Requires: CYGDBG_USE_ASSERTS
3684 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3685 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3690 # This option allows individual control of preconditions.
3691 # A precondition is one type of assert, which it is
3692 # useful to control separately from more general asserts.
3693 # The function is CYG_PRECONDITION(condition,msg).
3695 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3696 # This option is not active
3697 # The parent CYGDBG_USE_ASSERTS is not active
3700 # No user value, uncomment the following line to provide one.
3702 # value_source default
3707 # This option allows individual control of postconditions.
3708 # A postcondition is one type of assert, which it is
3709 # useful to control separately from more general asserts.
3710 # The function is CYG_POSTCONDITION(condition,msg).
3712 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3713 # This option is not active
3714 # The parent CYGDBG_USE_ASSERTS is not active
3717 # No user value, uncomment the following line to provide one.
3719 # value_source default
3724 # This option allows individual control of loop invariants.
3725 # A loop invariant is one type of assert, which it is
3726 # useful to control separately from more general asserts,
3727 # particularly since a loop invariant is typically evaluated
3728 # a great many times when used correctly.
3729 # The function is CYG_LOOP_INVARIANT(condition,msg).
3731 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3732 # This option is not active
3733 # The parent CYGDBG_USE_ASSERTS is not active
3736 # No user value, uncomment the following line to provide one.
3738 # value_source default
3743 # All assertions within eCos contain a text message
3744 # which should give some information about the condition
3746 # These text messages will end up being embedded in the
3747 # application image and hence there is a significant penalty
3748 # in terms of image size.
3749 # It is possible to suppress the use of these messages by
3750 # disabling this option.
3751 # This results in smaller code size, but there is less
3752 # human-readable information if an assertion actually gets
3755 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3756 # This option is not active
3757 # The parent CYGDBG_USE_ASSERTS is not active
3760 # No user value, uncomment the following line to provide one.
3762 # value_source default
3768 # If this option is defined, tracing operations
3769 # result in output or logging, depending on other options.
3770 # This may have adverse effects on performance, if the time
3771 # taken to output message overwhelms the available CPU
3772 # power or output bandwidth.
3773 # Trace functions (CYG_TRACE()) are defined in
3774 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3775 # If it is not defined, these result in no additional
3776 # object code and no trace information.
3778 cdl_component CYGDBG_USE_TRACING {
3779 # This option is not active
3780 # The parent CYGPKG_INFRA_DEBUG is disabled
3783 # No user value, uncomment the following line to provide one.
3785 # value_source default
3787 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3788 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3791 # The following properties are affected by this value
3792 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3793 # ActiveIf: CYGDBG_USE_TRACING
3794 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3795 # ActiveIf: CYGDBG_USE_TRACING
3796 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3797 # ActiveIf: CYGDBG_USE_TRACING
3798 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3799 # ActiveIf: CYGDBG_USE_TRACING
3800 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3801 # ActiveIf: CYGDBG_USE_TRACING
3805 # Trace function reports
3806 # This option allows individual control of
3807 # function entry/exit tracing, independent of
3808 # more general tracing output.
3809 # This may be useful to remove clutter from a
3812 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3813 # This option is not active
3814 # The parent CYGDBG_USE_TRACING is not active
3815 # The parent CYGDBG_USE_TRACING is disabled
3818 # No user value, uncomment the following line to provide one.
3820 # value_source default
3825 # All trace calls within eCos contain a text message
3826 # which should give some information about the circumstances.
3827 # These text messages will end up being embedded in the
3828 # application image and hence there is a significant penalty
3829 # in terms of image size.
3830 # It is possible to suppress the use of these messages by
3831 # disabling this option.
3832 # This results in smaller code size, but there is less
3833 # human-readable information available in the trace output,
3834 # possibly only filenames and line numbers.
3836 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3837 # This option is not active
3838 # The parent CYGDBG_USE_TRACING is not active
3839 # The parent CYGDBG_USE_TRACING is disabled
3842 # No user value, uncomment the following line to provide one.
3844 # value_source default
3849 # Trace output implementations
3851 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3852 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3853 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3854 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3855 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3856 # This option is not active
3857 # The parent CYGPKG_INFRA_DEBUG is disabled
3859 # This value cannot be modified here.
3863 # The following properties are affected by this value
3864 # component CYGDBG_USE_ASSERTS
3865 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3866 # component CYGDBG_USE_TRACING
3867 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3871 # A null output module which is useful when
3872 # debugging interactively; the output routines
3873 # can be breakpointed rather than have them actually
3874 # 'print' something.
3876 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3877 # This option is not active
3878 # The parent CYGPKG_INFRA_DEBUG is disabled
3881 # No user value, uncomment the following line to provide one.
3883 # value_source default
3888 # An output module which produces simple output
3889 # from tracing and assertion events.
3891 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3892 # This option is not active
3893 # The parent CYGPKG_INFRA_DEBUG is disabled
3896 # No user value, uncomment the following line to provide one.
3898 # value_source default
3903 # An output module which produces fancy output
3904 # from tracing and assertion events.
3906 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3907 # This option is not active
3908 # The parent CYGPKG_INFRA_DEBUG is disabled
3911 # No user value, uncomment the following line to provide one.
3913 # value_source default
3918 # An output module which buffers output
3919 # from tracing and assertion events. The stored
3920 # messages are output when an assert fires, or
3921 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3923 # Of course, there will only be stored messages
3924 # if tracing per se (CYGDBG_USE_TRACING)
3927 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3928 # This option is not active
3929 # The parent CYGPKG_INFRA_DEBUG is disabled
3932 # No user value, uncomment the following line to provide one.
3934 # value_source default
3940 # The size of the trace buffer. This counts the number
3941 # of trace records stored. When the buffer fills it
3942 # either wraps, stops recording, or generates output.
3944 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3945 # This option is not active
3946 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3947 # ActiveIf constraint: CYGDBG_USE_TRACING
3948 # CYGDBG_USE_TRACING == 0
3952 # No user value, uncomment the following line to provide one.
3954 # value_source default
3956 # Legal values: 5 to 65535
3959 # Wrap trace buffer when full
3960 # When the trace buffer has filled with records it
3961 # starts again at the beginning. Hence only the last
3962 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3965 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3966 # This option is not active
3967 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3968 # ActiveIf constraint: CYGDBG_USE_TRACING
3969 # CYGDBG_USE_TRACING == 0
3973 # No user value, uncomment the following line to provide one.
3975 # value_source default
3979 # Halt trace buffer when full
3980 # When the trace buffer has filled with records it
3981 # stops recording. Hence only the first
3982 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3985 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3986 # This option is not active
3987 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3988 # ActiveIf constraint: CYGDBG_USE_TRACING
3989 # CYGDBG_USE_TRACING == 0
3993 # No user value, uncomment the following line to provide one.
3995 # value_source default
3999 # Print trace buffer when full
4000 # When the trace buffer has filled with records it
4001 # prints the contents of the buffer. The buffer is then
4002 # emptied and the system continues.
4004 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
4005 # This option is not active
4006 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4007 # ActiveIf constraint: CYGDBG_USE_TRACING
4008 # CYGDBG_USE_TRACING == 0
4012 # No user value, uncomment the following line to provide one.
4014 # value_source default
4018 # Print trace buffer on assert fail
4019 # When an assertion fails the trace buffer will be
4020 # printed to the default diagnostic device.
4022 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
4023 # This option is not active
4024 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4025 # ActiveIf constraint: CYGDBG_USE_TRACING
4026 # CYGDBG_USE_TRACING == 0
4030 # No user value, uncomment the following line to provide one.
4032 # value_source default
4037 # Use function names
4038 # All trace and assert calls within eCos contain a
4039 # reference to the builtin macro '__PRETTY_FUNCTION__',
4040 # which evaluates to a string containing
4041 # the name of the current function.
4042 # This is useful when reading a trace log.
4043 # It is possible to suppress the use of the function name
4044 # by disabling this option.
4045 # This results in smaller code size, but there is less
4046 # human-readable information available in the trace output,
4047 # possibly only filenames and line numbers.
4049 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4050 # This option is not active
4051 # The parent CYGPKG_INFRA_DEBUG is disabled
4054 # No user value, uncomment the following line to provide one.
4056 # value_source default
4062 # Some packages require a startup routine to be called.
4063 # This can be carried out by application code, by supplying
4064 # a routine called cyg_package_start() which calls the
4065 # appropriate package startup routine(s).
4066 # Alternatively, this routine can be constructed automatically
4067 # and configured to call the startup routines of your choice.
4069 cdl_component CYGPKG_INFRA_STARTUP {
4070 # There is no associated value.
4074 # Start uITRON subsystem
4075 # Generate a call to initialize the
4076 # uITRON compatibility subsystem
4077 # within the system version of cyg_package_start().
4078 # This enables compatibility with uITRON.
4079 # You must configure uITRON with the correct tasks before
4080 # starting the uItron subsystem.
4081 # If this is disabled, and you want to use uITRON,
4082 # you must call cyg_uitron_start() from your own
4083 # cyg_package_start() or cyg_userstart().
4085 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4086 # This option is not active
4087 # ActiveIf constraint: CYGPKG_UITRON
4088 # CYGPKG_UITRON (unknown) == 0
4092 # No user value, uncomment the following line to provide one.
4094 # value_source default
4096 # Requires: CYGPKG_UITRON
4097 # CYGPKG_UITRON (unknown) == 0
4102 # Smaller slower memcpy()
4103 # Enabling this option causes the implementation of
4104 # the standard memcpy() routine to reduce code
4105 # size at the expense of execution speed. This
4106 # option is automatically enabled with the use of
4107 # the -Os option to the compiler. Also note that
4108 # the compiler will try to use its own builtin
4109 # version of memcpy() if possible, ignoring the
4110 # implementation in this package, unless given
4111 # the -fno-builtin compiler option.
4113 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4115 # No user value, uncomment the following line to provide one.
4117 # value_source default
4121 # Smaller slower memset()
4122 # Enabling this option causes the implementation of
4123 # the standard memset() routine to reduce code
4124 # size at the expense of execution speed. This
4125 # option is automatically enabled with the use of
4126 # the -Os option to the compiler. Also note that
4127 # the compiler will try to use its own builtin
4128 # version of memset() if possible, ignoring the
4129 # implementation in this package, unless given
4130 # the -fno-builtin compiler option.
4132 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4134 # No user value, uncomment the following line to provide one.
4136 # value_source default
4140 # Provide empty C++ delete functions
4141 # To deal with virtual destructors, where the correct delete()
4142 # function must be called for the derived class in question, the
4143 # underlying delete is called when needed, from destructors. This
4144 # is regardless of whether the destructor is called by delete itself.
4145 # So there is a reference to delete() from all destructors. The
4146 # default builtin delete() attempts to call free() if there is
4147 # one defined. So, if you have destructors, and you have free(),
4148 # as in malloc() and free(), any destructor counts as a reference
4149 # to free(). So the dynamic memory allocation code is linked
4150 # in regardless of whether it gets explicitly called. This
4151 # increases code and data size needlessly.
4152 # To defeat this undesirable behaviour, we define empty versions
4153 # of delete and delete. But doing this prevents proper use
4154 # of dynamic memory in C++ programs via C++'s new and delete
4156 # Therefore, this option is provided
4157 # for explicitly disabling the provision of these empty functions,
4158 # so that new and delete can be used, if that is what is required.
4160 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4162 # No user value, uncomment the following line to provide one.
4164 # value_source default
4168 # Threshold for valid number of delete calls
4169 # Some users don't know about the empty delete function and then
4170 # wonder why their C++ classes are leaking memory. If
4171 # INFRA_DEBUG is enabled we keep a counter for the number of
4172 # times delete is called. If it goes above this threshold we throw
4173 # an assertion failure. This should point heavy users of
4174 # delete in the right direction without upsetting those who want
4175 # an empty delete function.
4177 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4178 # This option is not active
4179 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4180 # CYGPKG_INFRA_DEBUG == 0
4184 # No user value, uncomment the following line to provide one.
4186 # value_source default
4187 # Default value: 100
4190 # Provide dummy abort() function
4191 # This option controls the inclusion of a dummy abort() function.
4192 # Parts of the C and C++ compiler runtime systems contain references
4193 # to abort(), particulary in the C++ exception handling code. It is
4194 # not possible to eliminate these references, so this dummy function
4195 # in included to satisfy them. It is not expected that this function
4196 # will ever be called, so its current behaviour is to simply loop.
4198 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4200 # No user value, uncomment the following line to provide one.
4202 # value_source default
4203 # Default value: CYGINT_ISO_EXIT == 0
4204 # CYGINT_ISO_EXIT == 0
4206 # Requires: !CYGINT_ISO_EXIT
4207 # CYGINT_ISO_EXIT == 0
4211 # Reset platform at end of test case execution
4212 # If this option is set then test case programs will reset the platform
4213 # when they terminate, as opposed to the default which is to just hang
4216 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4218 # No user value, uncomment the following line to provide one.
4220 # value_source default
4224 # Provide dummy strlen() function
4225 # This option controls the inclusion of a dummy strlen() function.
4226 # Parts of the C and C++ compiler runtime systems contain references
4227 # to strlen(), particulary in the C++ exception handling code. It is
4228 # not possible to eliminate these references, so this dummy function
4229 # in included to satisfy them. While it is not expected that this function
4230 # will ever be called, it is functional but uses the simplest, smallest
4231 # algorithm. There is a faster version of strlen() in the C library.
4233 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4235 # No user value, uncomment the following line to provide one.
4237 # value_source default
4238 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4239 # CYGINT_ISO_STRING_STRFUNCS == 1
4241 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4242 # CYGINT_ISO_STRING_STRFUNCS == 1
4246 # Make all compiler warnings show as errors
4247 # Enabling this option will cause all compiler warnings to show
4248 # as errors and bring the library build to a halt. This is used
4249 # to ensure that the code base is warning free, and thus ensure
4250 # that newly introduced warnings stand out and get fixed before
4251 # they show up as weird run-time behavior.
4253 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4258 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4259 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4262 # The following properties are affected by this value
4263 # option CYGBLD_GLOBAL_CFLAGS
4264 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4267 # Make compiler and assembler communicate by pipe
4268 # Enabling this option will cause the compiler to feed the
4269 # assembly output the the assembler via a pipe instead of
4270 # via a temporary file. This normally reduces the build
4273 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4278 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4279 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4283 # Infra build options
4284 # Package specific build options including control over
4285 # compiler flags used only in building this package.
4287 cdl_component CYGPKG_INFRA_OPTIONS {
4288 # There is no associated value.
4292 # Additional compiler flags
4293 # This option modifies the set of compiler flags for
4294 # building the eCos infra package. These flags are used
4295 # in addition to the set of global flags.
4297 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4299 # No user value, uncomment the following line to provide one.
4300 # user_value "-fno-rtti -Woverloaded-virtual"
4301 # value_source default
4302 # Default value: "-fno-rtti -Woverloaded-virtual"
4305 # Suppressed compiler flags
4306 # This option modifies the set of compiler flags for
4307 # building the eCos infra package. These flags are removed from
4308 # the set of global flags if present.
4310 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4312 # No user value, uncomment the following line to provide one.
4313 # user_value -Wno-pointer-sign
4314 # value_source default
4315 # Default value: -Wno-pointer-sign
4318 # Suppressed linker flags
4319 # This option modifies the set of linker flags for
4320 # building the eCos infra package tests. These flags are removed from
4321 # the set of global flags if present.
4323 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4325 # No user value, uncomment the following line to provide one.
4326 # user_value -Wl,--gc-sections
4327 # value_source default
4328 # Default value: -Wl,--gc-sections
4331 # Additional linker flags
4332 # This option modifies the set of linker flags for
4333 # building the eCos infra package tests. These flags are added to
4334 # the set of global flags if present.
4336 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4338 # No user value, uncomment the following line to provide one.
4339 # user_value -Wl,--fatal-warnings
4340 # value_source default
4341 # Default value: -Wl,--fatal-warnings
4344 # Infra package tests
4346 cdl_component CYGPKG_INFRA_TESTS {
4347 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4349 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4353 # Number of times a test runs
4354 # This option controls the number of times tests will execute their
4355 # basic function. Not all tests will honor this setting, but those
4356 # that do will execute the test N times before terminating. A value
4357 # less than 0 indicates to run forever.
4359 cdl_option CYGNUM_TESTS_RUN_COUNT {
4361 # No user value, uncomment the following line to provide one.
4363 # value_source default
4370 # Redboot ROM monitor
4371 # doc: ref/redboot.html
4372 # This package supports the Redboot [stand-alone debug monitor]
4373 # using eCos as the underlying board support mechanism.
4375 cdl_package CYGPKG_REDBOOT {
4376 # Packages cannot be added or removed, nor can their version be changed,
4377 # simply by editing their value. Instead the appropriate configuration
4378 # should be used to perform these actions.
4380 # This value cannot be modified here.
4382 # Current value: 1 current
4383 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4384 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4387 # The following properties are affected by this value
4388 # component CYGPKG_REDBOOT_ARM_OPTIONS
4389 # ActiveIf: CYGPKG_REDBOOT
4390 # component CYGPKG_REDBOOT_HAL_OPTIONS
4391 # ActiveIf: CYGPKG_REDBOOT
4392 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4393 # ActiveIf: CYGPKG_REDBOOT
4394 # option CYGSEM_IO_ETH_DRIVERS_WARN
4395 # ActiveIf: CYGPKG_REDBOOT
4399 # Include support for ELF file format
4401 cdl_component CYGSEM_REDBOOT_ELF {
4403 # No user value, uncomment the following line to provide one.
4405 # value_source default
4410 # Use the virtual address in the ELF headers
4411 # The ELF headers contain both a virtual and a physical address
4412 # for where code/data should be loaded. By default the physical
4413 # address is used but sometimes it is necassary to use the
4414 # virtual address because of bugy toolchains
4416 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4418 # No user value, uncomment the following line to provide one.
4420 # value_source default
4425 # Methods of loading images using redboot
4427 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4428 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4429 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4430 # This value cannot be modified here.
4434 # The following properties are affected by this value
4435 # component CYGBLD_BUILD_REDBOOT
4436 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4439 # Build Redboot ROM ELF image
4440 # This option enables the building of the Redboot ELF image.
4441 # The image may require further relocation or symbol
4442 # stripping before being converted to a binary image.
4443 # This is handled by a rule in the target CDL.
4445 cdl_component CYGBLD_BUILD_REDBOOT {
4447 # No user value, uncomment the following line to provide one.
4449 # The inferred value should not be edited directly.
4451 # value_source inferred
4453 # Requires: CYGPKG_INFRA
4454 # CYGPKG_INFRA == current
4456 # Requires: CYGPKG_ISOINFRA
4457 # CYGPKG_ISOINFRA == current
4459 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4460 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4462 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4463 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4465 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4466 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4468 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4469 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4471 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4472 # CYGINT_ISO_STRING_MEMFUNCS == 1
4474 # Requires: CYGINT_ISO_STRING_STRFUNCS
4475 # CYGINT_ISO_STRING_STRFUNCS == 1
4477 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4478 # CYGINT_REDBOOT_LOAD_METHOD == 2
4481 # The following properties are affected by this value
4482 # package CYGPKG_HAL_ARM_TX53KARO
4483 # Requires: CYGBLD_BUILD_REDBOOT == 1
4484 # option CYGBLD_BUILD_REDBOOT_BIN
4485 # ActiveIf: CYGBLD_BUILD_REDBOOT
4489 # Include GDB support in RedBoot
4490 # RedBoot normally includes support for the GDB debugging
4491 # protocols. This option allows this to be disabled which
4492 # may yield a substantial savings in terms of code and memory
4495 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4496 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4497 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4502 # The inferred value should not be edited directly.
4506 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4507 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4509 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4510 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4514 # Threads debugging support
4515 # Enabling this option will include special code in the
4516 # GDB stubs to support debugging of threaded programs. In
4517 # the case of eCos programs, this support allows GDB to
4518 # have complete access to the eCos threads in the
4521 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4522 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4523 # CYG_HAL_STARTUP == ROMRAM
4527 # No user value, uncomment the following line to provide one.
4529 # value_source default
4531 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4532 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4536 # Customized version string
4537 # Use this option to define a customized version "string" for
4538 # RedBoot. Note: this value is only cosmetic, displayed by the
4539 # "version" command, but is useful for providing site specific
4540 # information about the RedBoot configuration.
4542 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4544 # No user value, uncomment the following line to provide one.
4546 # The inferred value should not be edited directly.
4547 inferred_value 1 "Ka-Ro 2010-01-06"
4548 # value_source inferred
4549 # Default value: 0 0
4552 # Enable command line editing
4553 # If this option is non-zero, RedBoot will remember the
4554 # last N command lines. These lines may be reused.
4555 # Enabling this history will also enable rudimentary
4556 # editting of the lines themselves.
4558 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4560 # No user value, uncomment the following line to provide one.
4562 # value_source default
4565 # The following properties are affected by this value
4566 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4567 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4568 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4569 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4572 # Enable command line editing using ANSI arrows, etc
4573 # If this option is enabled, RedBoot will accept standard ANSI key
4574 # sequences for cursor movement (along with the emacs style keys).
4576 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4577 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4578 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4582 # No user value, uncomment the following line to provide one.
4584 # value_source default
4588 # Enable history command and expansion
4589 # Enabling this option will allow RedBoot to provide a
4590 # history command to list previous commands. Also enables
4591 # history expansion via '!' character similar to bash
4594 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4596 # No user value, uncomment the following line to provide one.
4598 # value_source default
4600 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4601 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4605 # Number of unique RAM segments on platform
4606 # Change this option to be the number of memory segments which are
4607 # supported by the platform. If the value is greater than 1, then
4608 # a platform specific function must provide information about the
4609 # additional segments.
4611 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4613 # No user value, uncomment the following line to provide one.
4615 # value_source default
4619 # Include support gzip/zlib decompression
4621 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4622 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4623 # CYGPKG_COMPRESS_ZLIB == current
4627 # No user value, uncomment the following line to provide one.
4629 # value_source default
4632 # The following properties are affected by this value
4633 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4634 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4638 # Size of zlib decompression buffer
4639 # This is the size of the buffer filled with incoming data
4640 # during load before calls are made to the decompressor
4641 # function. For ethernet downloads this can be made bigger
4642 # (at the cost of memory), but for serial downloads on slow
4643 # processors it may be necessary to reduce the size to
4644 # avoid serial overruns. zlib appears to bail out if less
4645 # than five bytes are available initially so this is the
4648 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4650 # No user value, uncomment the following line to provide one.
4652 # value_source default
4654 # Legal values: 5 to 256
4657 # Support compression of Flash images
4658 # This CDL indicates whether flash images can
4659 # be decompressed from gzip/zlib format into RAM.
4661 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4662 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4663 # CYGPKG_REDBOOT_FLASH == 1
4665 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4666 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4667 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4670 # Calculated value: 1
4675 # Include GZIP uncompress command
4676 # Enable this option to include a 'gunzip' command
4677 # to uncompress GZIP compressed data.
4679 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4681 # No user value, uncomment the following line to provide one.
4683 # value_source default
4687 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4688 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4690 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4692 # No user value, uncomment the following line to provide one.
4694 # The inferred value should not be edited directly.
4696 # value_source inferred
4699 # The following properties are affected by this value
4700 # option CYGPRI_REDBOOT_ZLIB_FLASH
4701 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4705 # Include support for xyzModem downloads
4706 # doc: ref/download-command.html
4708 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4710 # No user value, uncomment the following line to provide one.
4712 # value_source default
4715 # The following properties are affected by this value
4716 # option CYGPKG_REDBOOT_CFLAGS_ADD
4717 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4720 # Additional compiler flags
4721 # This option modifies the set of compiler flags for
4722 # building the eCos infra package. These flags are used
4723 # in addition to the set of global flags.
4725 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4726 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4727 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4731 # No user value, uncomment the following line to provide one.
4732 # user_value -Wno-inline
4733 # value_source default
4734 # Default value: -Wno-inline
4737 # Allow the load-command write into Flash.
4738 # Write images direct to Flash via the load command.
4739 # We assume anything which is invalid RAM is flash, hence
4740 # the requires statement
4742 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4743 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4744 # CYGPKG_REDBOOT_FLASH == 1
4748 # No user value, uncomment the following line to provide one.
4750 # value_source default
4752 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4753 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4757 # Include MS Windows CE support
4758 # doc: ref/wince.html
4759 # This option enables MS Windows CE EShell support
4760 # and Windows CE .BIN images support
4762 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4769 # Include support for MXC USB downloads
4771 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4773 # No user value, uncomment the following line to provide one.
4775 # value_source default
4779 # Include support for i.MX USB OTG downloads
4781 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4783 # No user value, uncomment the following line to provide one.
4785 # value_source default
4789 # Include POSIX checksum command
4790 # doc: ref/cksum-command.html
4792 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4794 # No user value, uncomment the following line to provide one.
4796 # value_source default
4800 # Include memory fill command
4801 # doc: ref/mfill-command.html
4803 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4805 # No user value, uncomment the following line to provide one.
4807 # value_source default
4811 # Include memory compare command
4812 # doc: ref/mcmp-command.html
4814 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4816 # No user value, uncomment the following line to provide one.
4818 # value_source default
4822 # Include memory copy command
4823 # doc: ref/mcopy-command.html
4825 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4827 # No user value, uncomment the following line to provide one.
4829 # value_source default
4833 # Include memory dump command
4834 # doc: ref/dump-command.html
4836 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4838 # No user value, uncomment the following line to provide one.
4840 # value_source default
4844 # Include cache command
4845 # doc: ref/cache-command.html
4847 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4849 # No user value, uncomment the following line to provide one.
4851 # value_source default
4855 # Include exec command
4856 # doc: ref/exec-command.html
4858 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4860 # No user value, uncomment the following line to provide one.
4862 # value_source default
4865 # The following properties are affected by this value
4866 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4867 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4870 # Include I/O Memory commands 'iopeek' and 'iopoke'
4872 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4874 # No user value, uncomment the following line to provide one.
4876 # value_source default
4880 # Granularity of timer/ticks
4881 # This option controls the granularity of the timers.
4882 # Faster CPUs can afford higher granularity (lower values)
4883 # which should give higher network performance since the stack
4886 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4888 # No user value, uncomment the following line to provide one.
4890 # value_source default
4891 # Default value: 250
4892 # Legal values: 10 25 50 100 250 500 1000
4895 # Redboot Networking
4896 # This option includes networking support in RedBoot.
4898 cdl_component CYGPKG_REDBOOT_NETWORKING {
4899 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4900 # CYGPKG_IO_ETH_DRIVERS == current
4904 # No user value, uncomment the following line to provide one.
4906 # value_source default
4909 # The following properties are affected by this value
4910 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4911 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4915 # Print net debug information
4916 # This option is overriden by the configuration stored
4919 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4921 # No user value, uncomment the following line to provide one.
4923 # value_source default
4927 # Support TFTP for download
4928 # This option enables the use of the TFTP protocol for
4931 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4933 # No user value, uncomment the following line to provide one.
4935 # value_source default
4939 # Support HTTP for download
4940 # This option enables the use of the HTTP protocol for
4943 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4950 # Default IP address
4951 # This IP address is the default used by RedBoot if
4952 # a BOOTP/DHCP server does not respond. The numbers
4953 # should be separated by *commas*, and not dots. If
4954 # an IP address is configured into the Flash
4955 # configuration, that will be used in preference.
4957 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4959 # No user value, uncomment the following line to provide one.
4961 # value_source default
4962 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4963 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4968 # Do not try to use BOOTP
4969 # By default Redboot tries to use BOOTP to get an IP
4970 # address. If there's no BOOTP server on your network
4971 # use this option to avoid to wait until the
4972 # timeout. This option is overriden by the
4973 # configuration stored in flash.
4975 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4976 # This option is not active
4977 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4980 # No user value, uncomment the following line to provide one.
4982 # value_source default
4986 # Default bootp server
4987 # This IP address is the default server
4988 # address used by RedBoot if a BOOTP/DHCP
4989 # server does not respond. The numbers should
4990 # be separated by *commas*, and not dots. If
4991 # an IP address is configured into the Flash
4992 # configuration, that will be used in
4995 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4996 # This option is not active
4997 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
5000 # No user value, uncomment the following line to provide one.
5002 # value_source default
5003 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5004 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5009 # Use DHCP to get IP information
5010 # Use DHCP protocol to obtain pertinent IP addresses, such
5011 # as the client, server, gateway, etc.
5013 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
5015 # No user value, uncomment the following line to provide one.
5017 # value_source default
5020 # The following properties are affected by this value
5021 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
5022 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5025 # Use a gateway for non-local IP traffic
5026 # Enabling this option will allow the RedBoot networking
5027 # stack to use a [single] gateway to reach a non-local
5028 # IP address. If disabled, RedBoot will only be able to
5029 # reach nodes on the same subnet.
5031 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
5033 # No user value, uncomment the following line to provide one.
5035 # value_source default
5037 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5038 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5043 # Default gateway IP address
5044 # This IP address is the default used by RedBoot
5045 # if a BOOTP/DHCP server does not respond. The
5046 # numbers should be separated by *commas*, and
5047 # not dots. If an IP address is configured into
5048 # the Flash configuration, that will be used in
5051 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5053 # No user value, uncomment the following line to provide one.
5055 # value_source default
5056 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5057 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5061 # Default IP address mask
5062 # This IP address mask is the default used by
5063 # RedBoot if a BOOTP/DHCP server does not
5064 # respond. The numbers should be separated by
5065 # *commas*, and not dots. If an IP address is
5066 # configured into the Flash configuration, that
5067 # will be used in preference.
5069 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5071 # No user value, uncomment the following line to provide one.
5073 # value_source default
5074 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5075 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5080 # TCP port to listen for incoming connections
5081 # RedBoot will 'listen' on this port for incoming TCP
5082 # connections. This allows outside connections to be made
5083 # to the platform, either for GDB or RedBoot commands.
5085 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5087 # No user value, uncomment the following line to provide one.
5089 # value_source default
5090 # Default value: 9000
5093 # Number of [network] packet buffers
5094 # RedBoot may need to buffer network data to support
5095 # various connections. This option allows control
5096 # over the number of such buffered packets, and in
5097 # turn, controls the amount of memory used by RedBoot
5098 # (which is not available to user applications).
5099 # Each packet buffer takes up about 1514 bytes.
5100 # Note: there is little need to make this larger than
5103 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5105 # No user value, uncomment the following line to provide one.
5107 # value_source default
5109 # Legal values: 3 to 8
5113 # When this option is enabled, RedBoot will be built with
5114 # support for DNS, allowing use of hostnames on the command
5117 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5118 # This option is not active
5119 # ActiveIf constraint: CYGPKG_NS_DNS
5120 # CYGPKG_NS_DNS (unknown) == 0
5124 # No user value, uncomment the following line to provide one.
5126 # value_source default
5128 # Requires: !CYGPKG_NS_DNS_BUILD
5129 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5135 # This option sets the IP of the default DNS. The IP can be
5136 # changed at runtime as well.
5138 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5139 # This option is not active
5140 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5141 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5142 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5146 # No user value, uncomment the following line to provide one.
5147 # user_value 0.0.0.0
5148 # value_source default
5149 # Default value: 0.0.0.0
5152 # Timeout in DNS lookup
5153 # This option sets the timeout used when looking up an
5154 # address via the DNS. Default is 10 seconds.
5156 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5157 # This option is not active
5158 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5161 # No user value, uncomment the following line to provide one.
5163 # value_source default
5167 # Support the use of a domain name
5168 # This option controls if Redboot supports domain
5169 # names when performing DNS lookups
5171 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5172 # This option is not active
5173 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5176 # No user value, uncomment the following line to provide one.
5178 # value_source default
5183 # Default DNS domain
5184 # This option sets the default DNS domain name.
5185 # This value will be overwritten by the value in
5186 # flash or a domain returned by DHCP
5188 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5189 # This option is not active
5190 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5191 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5194 # No user value, uncomment the following line to provide one.
5196 # value_source default
5197 # Default value: 0 0
5200 # Get DNS domain from Flash
5201 # This option enables getting the domain name
5202 # from the flash configuration. This can later be
5203 # overwritten by a value learnt from DHCP
5205 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5206 # This option is not active
5207 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5208 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5209 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5210 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5214 # No user value, uncomment the following line to provide one.
5216 # value_source default
5220 # Use DNS domain from DHCP
5221 # This option enables the use of the domain name
5224 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5225 # This option is not active
5226 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5227 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5230 # No user value, uncomment the following line to provide one.
5232 # value_source default
5236 # BOOTP/DHCP DNS domain buffer size
5237 # This options sets the size of the static
5238 # buffer used by BOOTP/DHCP to store the DNS
5239 # domain name. The domain name will not be
5240 # set if the buffer is too small to hold it.
5242 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5243 # This option is not active
5244 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5245 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5248 # No user value, uncomment the following line to provide one.
5250 # value_source default
5256 # Default network device driver
5257 # This is the name of the default network device to use.
5259 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5260 # This option is not active
5261 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5262 # CYGHWR_NET_DRIVERS == 1
5266 # No user value, uncomment the following line to provide one.
5268 # value_source default
5269 # Default value: "\"\""
5272 # Initialize only one net device
5273 # This option tells RedBoot to stop initializing network
5274 # devices when it finds the first device which is
5275 # successfully initialized. The default behavior causes
5276 # all network devices to be initialized.
5278 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5279 # This option is not active
5280 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5281 # CYGHWR_NET_DRIVERS == 1
5285 # No user value, uncomment the following line to provide one.
5287 # value_source default
5292 # Let RedBoot use any I/O channel for its console.
5293 # If this option is enabled then RedBoot will attempt to use all
5294 # defined serial I/O channels for its console device. Once input
5295 # arrives at one of these channels then the console will use only
5298 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5300 # No user value, uncomment the following line to provide one.
5302 # The inferred value should not be edited directly.
5304 # value_source inferred
5308 # Let RedBoot adjust the baud rate of the serial console.
5309 # If this option is enabled then RedBoot will support commands
5310 # to set and query the baud rate on the selected console.
5312 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5313 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5314 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5318 # No user value, uncomment the following line to provide one.
5320 # value_source default
5324 # Run a platform specific startup function.
5325 # If this option is enabled then RedBoot will execute a platform
5326 # specific startup function before entering into its command line
5327 # processing. This allows the platform to perform any special
5328 # setups before RedBoot actually starts running. Note: the entire
5329 # RedBoot environment will already be initialized at this point.
5331 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5333 # No user value, uncomment the following line to provide one.
5335 # value_source default
5339 # Run a platform specific ESA validation function.
5340 # If this option is enabled then RedBoot will execute a platform
5341 # specific function to validate an ethernet ESA. This would be
5342 # useful if the address must conform to standards set by the
5343 # hardware manufacturer, etc.
5345 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5347 # No user value, uncomment the following line to provide one.
5349 # The inferred value should not be edited directly.
5351 # value_source inferred
5354 # The following properties are affected by this value
5355 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5356 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5357 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5358 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5361 # Maximum command line length
5362 # This option allows control over how long the CLI command line
5363 # should be. This space will be allocated statically
5364 # rather than from RedBoot's stack.
5366 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5368 # No user value, uncomment the following line to provide one.
5370 # The inferred value should not be edited directly.
5372 # value_source inferred
5373 # Default value: 256
5376 # Command processing idle timeout (ms)
5377 # This option controls the timeout period before the
5378 # command processing is considered 'idle'. Making this
5379 # number smaller will cause idle processing to take place
5380 # more often, etc. The default value of 10ms is a reasonable
5381 # tradeoff between responsiveness and overhead.
5383 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5385 # No user value, uncomment the following line to provide one.
5387 # value_source default
5391 # Validate RAM addresses during load
5392 # This option controls whether or not RedBoot will make
5393 # sure that memory being used by the "load" command is
5394 # in fact in user RAM. Leaving the option enabled makes
5395 # for a safer environment, but this check may not be valid
5396 # on all platforms, thus the ability to disable it.
5397 # ** Disable this only with great care **
5399 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5401 # No user value, uncomment the following line to provide one.
5403 # value_source default
5406 # The following properties are affected by this value
5407 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5408 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5411 # Allow RedBoot to support FLASH programming
5412 # If this option is enabled then RedBoot will provide commands
5413 # to manage images in FLASH memory. These images can be loaded
5414 # into memory for execution or executed in place.
5416 cdl_component CYGPKG_REDBOOT_FLASH {
5417 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5418 # CYGHWR_IO_FLASH_DEVICE == 1
5422 # No user value, uncomment the following line to provide one.
5424 # value_source default
5427 # The following properties are affected by this value
5428 # option CYGPRI_REDBOOT_ZLIB_FLASH
5429 # ActiveIf: CYGPKG_REDBOOT_FLASH
5430 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5431 # ActiveIf: CYGPKG_REDBOOT_FLASH
5435 # Byte order used to store info in flash.
5436 # This option controls the byte ordering used to store
5437 # the FIS directory info and flash config info.
5439 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5441 # No user value, uncomment the following line to provide one.
5442 # user_value NATURAL
5443 # value_source default
5444 # Default value: NATURAL
5445 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5448 # RedBoot Flash Image System support
5449 # doc: ref/flash-image-system.html
5450 # This option enables the Flash Image System commands
5451 # and support within RedBoot. If disabled, simple Flash
5452 # access commands such as "fis write" will still exist.
5453 # This option would be disabled for targets that need simple
5454 # FLASH manipulation, but do not have the need or space for
5455 # complete image management.
5457 cdl_option CYGOPT_REDBOOT_FIS {
5459 # No user value, uncomment the following line to provide one.
5461 # value_source default
5464 # The following properties are affected by this value
5465 # component CYGPKG_REDBOOT_FIS_CONTENTS
5466 # ActiveIf: CYGOPT_REDBOOT_FIS
5467 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5468 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5469 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5470 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5473 # Max number of chunks of free space to manage
5474 # If this option is defined then "fis free" will
5475 # rely on the FIS directory to determine what space is
5476 # free within the FLASH. This option controls the
5477 # maximum number of free segment which can be handled
5478 # (typically this number is small). If this option is
5479 # not enabled, the the archaic behaviour of actually
5480 # scanning the FLASH for erased sectors (unreliable)
5481 # will be used to determine what's free and what's
5484 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5486 # No user value, uncomment the following line to provide one.
5488 # value_source default
5489 # Default value: 1 32
5492 # Flash Image System default directory contents
5494 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5495 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5496 # CYGOPT_REDBOOT_FIS == 1
5499 # Calculated value: 1
5505 # Flash block containing the Directory
5506 # Which block of flash should hold the directory
5507 # information. Positive numbers are absolute block
5508 # numbers. Negative block numbers count backwards
5509 # from the last block. eg 2 means block 2, -2
5510 # means the last but one block.
5512 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5514 # No user value, uncomment the following line to provide one.
5516 # value_source default
5519 # The following properties are affected by this value
5520 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5521 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5522 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5525 # Redundant Flash Image System Directory Support
5526 # This option enables the use of a redundant FIS
5527 # directory within RedBoot. If enabled a flash block
5528 # will be reserved for a second copy of the fis
5529 # directory. Doing this allow for power failure safe
5530 # updates of the directory by the application.
5532 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5534 # No user value, uncomment the following line to provide one.
5536 # value_source default
5538 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5539 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5544 # Flash block containing the backup Directory
5545 # Which block of flash should hold the redundant
5546 # directory information. Positive numbers are
5547 # absolute block numbers. Negative block numbers
5548 # count backwards from the last block. eg 2 means
5549 # block 2, -2 means the last but one block.
5551 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5552 # This option is not active
5553 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5556 # No user value, uncomment the following line to provide one.
5558 # value_source default
5560 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5561 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5562 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5563 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5566 # The following properties are affected by this value
5567 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5568 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5569 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5573 # Pseudo-file to describe reserved area
5574 # If an area of FLASH is reserved, it is informative to
5575 # have a fis entry describing it. This option controls
5576 # creation of such an entry by default in the fis init
5579 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5580 # This option is not active
5581 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5582 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5586 # No user value, uncomment the following line to provide one.
5588 # value_source default
5592 # File to describe RedBoot boot image
5593 # Normally a ROM-startup RedBoot image is first in the
5594 # FLASH, and the system boots using that image. This
5595 # option controls creation of an entry describing it in
5596 # the fis init command. It might be disabled if a
5597 # platform has an immutable boot image of its own, where
5598 # we use a POST-startup RedBoot instead, which performs
5599 # less board initialization.
5601 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5603 # No user value, uncomment the following line to provide one.
5605 # value_source default
5608 # The following properties are affected by this value
5609 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5610 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5611 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5612 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5615 # File to describe RedBoot POST-compatible image
5616 # This option controls creation of an entry describing a
5617 # POST-startup RedBoot image in the fis init command.
5618 # Not all platforms support POST-startup. A platform
5619 # might have both for testing purposes, where the
5620 # eventual user would substitute their own POST code for
5621 # the initial ROM-startup RedBoot, and then jump to the
5622 # POST-compatible RedBoot immediately following.
5624 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5626 # No user value, uncomment the following line to provide one.
5628 # value_source default
5629 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5630 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5635 # Offset of POST image from FLASH start
5636 # This option specifies the offset for a POST image from
5637 # the start of FLASH. If unset, then the fis entry
5638 # describing the POST image will be placed where
5641 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5642 # This option is not active
5643 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5646 # No user value, uncomment the following line to provide one.
5648 # value_source default
5649 # Default value: 0 0
5650 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5651 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5652 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5655 # The following properties are affected by this value
5656 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5657 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5661 # File to describe RedBoot backup image
5662 # This option controls creation of an entry describing a
5663 # backup RedBoot image in the fis init command.
5664 # Conventionally a RAM-startup RedBoot image is kept
5665 # under this name for use in updating the ROM-based
5666 # RedBoot that boots the board.
5668 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5670 # No user value, uncomment the following line to provide one.
5672 # value_source default
5676 # Include ARM SIB ID in FIS
5677 # If set, this option will cause the last 5 words of
5678 # the FIS to include the special ID needed for the
5679 # flash to be recognized as a reserved area for RedBoot
5680 # by an ARM BootRom monitor.
5682 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5684 # No user value, uncomment the following line to provide one.
5686 # value_source default
5690 # Size of FIS directory entry
5691 # The FIS directory is limited to one single flash
5692 # sector. If your flash has tiny sectors, you may wish
5693 # to reduce this value in order to get more slots in
5694 # the FIS directory.
5696 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5698 # No user value, uncomment the following line to provide one.
5700 # value_source default
5701 # Default value: 256
5704 # Number of FIS directory entries
5705 # The FIS directory normally occupies a single flash
5706 # sector. Adjusting this value can allow for more than
5707 # one flash sector to be used, which is useful if your
5708 # sectors are very small.
5710 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5712 # No user value, uncomment the following line to provide one.
5714 # value_source default
5718 # Maximum RedBoot image size
5719 # This option controls the maximum length reserved
5720 # for the RedBoot boot image in the FIS table.
5721 # This should be a multiple of the flash's erase
5724 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5726 # No user value, uncomment the following line to provide one.
5727 # user_value 0x00020000
5728 # The inferred value should not be edited directly.
5729 inferred_value 0x00040000
5730 # value_source inferred
5731 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5732 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5736 # Offset from start of FLASH to RedBoot boot image
5737 # This option controls where the RedBoot boot image is
5738 # located relative to the start of FLASH.
5740 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5742 # No user value, uncomment the following line to provide one.
5744 # value_source default
5745 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5746 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5748 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5749 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5750 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5753 # The following properties are affected by this value
5754 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5755 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5756 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5757 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5758 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5759 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5762 # Size of reserved area at start of FLASH
5763 # This option reserves an area at the start of
5764 # FLASH where RedBoot will never interfere; it is
5765 # expected that this area contains
5766 # (non-RedBoot-based) POST code or some other boot
5767 # monitor that executes before RedBoot.
5769 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5771 # No user value, uncomment the following line to provide one.
5773 # value_source default
5776 # The following properties are affected by this value
5777 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5778 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5779 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5780 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5781 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5782 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5786 # Keep all RedBoot FLASH data blocks locked.
5787 # When this option is enabled, RedBoot will keep configuration
5788 # data and the FIS directory blocks implicitly locked. While
5789 # this is somewhat safer, it does add overhead during updates.
5791 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5792 # This option is not active
5793 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5794 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5798 # No user value, uncomment the following line to provide one.
5800 # value_source default
5804 # Use CRC checksums on FIS images.
5805 # When this option is enabled, RedBoot will use CRC checksums
5806 # when reading and writing flash images.
5808 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5810 # No user value, uncomment the following line to provide one.
5812 # The inferred value should not be edited directly.
5814 # value_source inferred
5818 # ARM FLASH drivers support SIB flash block structure
5819 # This interface is implemented by a flash driver
5820 # to indicate that it supports the ARM SIB flash
5823 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5824 # No options implement this inferface
5825 # ActiveIf constraint: CYGPKG_HAL_ARM
5826 # CYGPKG_HAL_ARM == current
5829 # This value cannot be modified here.
5833 # The following properties are affected by this value
5834 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5835 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5838 # Use ARM SIB flash block structure
5839 # This option is used to interpret ARM Flash System
5840 # information blocks.
5842 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5843 # This option is not active
5844 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5845 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5849 # No user value, uncomment the following line to provide one.
5851 # value_source default
5856 # Keep RedBoot configuration data in FLASH
5857 # When this option is enabled, RedBoot will keep configuration
5858 # data in a separate block of FLASH memory. This data will
5859 # include such items as the node IP address or startup scripts.
5861 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5863 # No user value, uncomment the following line to provide one.
5865 # value_source default
5866 # Default value: CYGPKG_IO_FLASH != 0
5867 # CYGPKG_IO_FLASH == current
5870 # The following properties are affected by this value
5871 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5872 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5873 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5874 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5875 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5876 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5877 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5878 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5879 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5880 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5881 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5882 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5883 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5884 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5888 # Length of configuration data in FLASH
5889 # This option is used to control the amount of memory and FLASH
5890 # to be used for configuration options (persistent storage).
5892 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5894 # No user value, uncomment the following line to provide one.
5896 # value_source default
5897 # Default value: 4096
5900 # Style of media used for persistent data storage
5901 # Persistent data storage can either be held in 'norma' FLASH
5902 # or some other device (represented by the 'EEPROM' choice).
5903 # The different styles utilize different access methods.
5905 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5907 # No user value, uncomment the following line to provide one.
5909 # value_source default
5910 # Default value: FLASH
5911 # Legal values: "FLASH" "EEPROM"
5913 # The following properties are affected by this value
5914 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5915 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5916 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5917 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5920 # Merged config data and FIS directory
5921 # If this option is set, then the FIS directory and FLASH
5922 # configuration database will be stored in the same physical
5925 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5926 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5927 # CYGOPT_REDBOOT_FIS == 1
5928 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5932 # No user value, uncomment the following line to provide one.
5934 # value_source default
5937 # The following properties are affected by this value
5938 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5939 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5942 # Which block of flash to use
5943 # Which block of flash should hold the configuration
5944 # information. Positive numbers are absolute block numbers.
5945 # Negative block numbers count backwards from the last block.
5946 # eg 2 means block 2, -2 means the last but one block.
5948 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5950 # No user value, uncomment the following line to provide one.
5952 # value_source default
5956 # Support simple macros/aliases in FLASH
5957 # This option is used to allow support for simple text-based
5958 # macros (aliases). These aliases are kept in the FLASH
5959 # configuration data (persistent storage).
5961 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5963 # No user value, uncomment the following line to provide one.
5965 # value_source default
5969 # Length of strings in FLASH configuration data
5970 # This option is used to control the amount of memory
5971 # and FLASH to be used for string configuration
5972 # options (persistent storage).
5974 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5976 # No user value, uncomment the following line to provide one.
5978 # value_source default
5979 # Default value: 128
5982 # Length of configuration script(s) in FLASH
5983 # This option is used to control the amount of memory and
5984 # FLASH to be used for configuration options (persistent
5987 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5989 # No user value, uncomment the following line to provide one.
5991 # The inferred value should not be edited directly.
5993 # value_source inferred
5994 # Default value: 512
5997 # Fallback to read-only FLASH configuration
5998 # This option will cause the configuration information to
5999 # revert to the readonly information stored in the FLASH.
6000 # The option only takes effect after
6001 # 1) the config_ok flag has been set to be true,
6002 # indicating that at one time the copy in RAM was valid;
6004 # 2) the information in RAM has been verified to be invalid
6006 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
6008 # No user value, uncomment the following line to provide one.
6010 # value_source default
6011 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
6012 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
6017 # Allow RedBoot to support fileio
6018 # If this option is enabled then RedBoot will provide commands
6019 # to load files from fileio file systems such as JFFS2.
6021 cdl_component CYGPKG_REDBOOT_FILEIO {
6022 # This option is not active
6023 # ActiveIf constraint: CYGPKG_IO_FILEIO
6024 # CYGPKG_IO_FILEIO (unknown) == 0
6028 # No user value, uncomment the following line to provide one.
6030 # value_source default
6033 # The following properties are affected by this value
6034 # option CYGNUM_REDBOOT_GETC_BUFFER
6035 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6039 # Include an ls command
6040 # If this option is enabled a simple ls command will be
6041 # included in redboot so the contents of a directory
6044 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6045 # This option is not active
6046 # The parent CYGPKG_REDBOOT_FILEIO is not active
6049 # No user value, uncomment the following line to provide one.
6051 # value_source default
6056 # Allow RedBoot to support disks
6057 # If this option is enabled then RedBoot will provide commands
6058 # to load disk files.
6060 cdl_component CYGPKG_REDBOOT_DISK {
6068 # Include Redboot commands for disk access
6070 cdl_option CYGSEM_REDBOOT_DISK {
6071 # This option is not active
6072 # The parent CYGPKG_REDBOOT_DISK is disabled
6075 # No user value, uncomment the following line to provide one.
6077 # value_source default
6078 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6079 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6083 # Hardware drivers for disk-type devices
6085 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6086 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6087 # This option is not active
6088 # The parent CYGPKG_REDBOOT_DISK is disabled
6090 # This value cannot be modified here.
6094 # The following properties are affected by this value
6095 # option CYGSEM_REDBOOT_DISK
6096 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6099 # Maximum number of supported disks
6100 # This option controls the number of disks supported by
6103 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6104 # This option is not active
6105 # The parent CYGPKG_REDBOOT_DISK is disabled
6108 # No user value, uncomment the following line to provide one.
6110 # value_source default
6114 # Maximum number of partitions per disk
6115 # This option controls the maximum number of supported
6116 # partitions per disk.
6118 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6119 # This option is not active
6120 # The parent CYGPKG_REDBOOT_DISK is disabled
6123 # No user value, uncomment the following line to provide one.
6125 # value_source default
6129 # Support IDE disks.
6130 # When this option is enabled, RedBoot will support IDE disks.
6132 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6133 # This option is not active
6134 # The parent CYGPKG_REDBOOT_DISK is disabled
6135 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6136 # CYGINT_HAL_PLF_IF_IDE == 0
6140 # No user value, uncomment the following line to provide one.
6142 # value_source default
6147 # Work with VMware virtual disks
6148 # This option controls the disk driver behavior at
6151 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6152 # This option is not active
6153 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6156 # No user value, uncomment the following line to provide one.
6158 # value_source default
6163 # Support Linux second extended filesystems.
6164 # When this option is enabled, RedBoot will support EXT2
6167 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6168 # This option is not active
6169 # The parent CYGPKG_REDBOOT_DISK is disabled
6172 # No user value, uncomment the following line to provide one.
6174 # value_source default
6178 # Support ISO9660 filesystems.
6179 # When this option is enabled, RedBoot will support ISO9660
6182 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6183 # This option is not active
6184 # The parent CYGPKG_REDBOOT_DISK is disabled
6186 # Calculated value: 0
6193 # doc: ref/persistent-state-flash.html
6194 # This contains options related to RedBoot's boot script
6197 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6198 # There is no associated value.
6202 # Boot scripting enabled
6203 # This option controls whether RedBoot boot script
6204 # functionality is enabled.
6206 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6207 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6208 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6209 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6212 # Calculated value: 1
6217 # Use default RedBoot boot script
6218 # If enabled, this option will tell RedBoot to use the
6219 # value of this option as a default boot script.
6221 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6223 # No user value, uncomment the following line to provide one.
6225 # The inferred value should not be edited directly.
6227 # value_source inferred
6228 # Default value: 0 0
6230 # The following properties are affected by this value
6231 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6232 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6235 # Resolution (in ms) for script timeout value.
6236 # This option controls the resolution of the script
6237 # timeout. The value is specified in milliseconds
6238 # (ms), thus to have the script timeout be defined in
6239 # terms of tenths of seconds, use 100.
6241 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6243 # No user value, uncomment the following line to provide one.
6245 # The inferred value should not be edited directly.
6247 # value_source inferred
6248 # Default value: 1000
6251 # Script default timeout value
6252 # This option is used to set the default timeout for startup
6253 # scripts, when they are enabled.
6255 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6257 # No user value, uncomment the following line to provide one.
6259 # The inferred value should not be edited directly.
6261 # value_source inferred
6266 # Support RTC for time & date functions
6267 # When this option is enabled, RedBoot will support commands to
6268 # query and set the real time clock (time and date)
6270 cdl_option CYGSEM_REDBOOT_RTC {
6271 # This option is not active
6272 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6273 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6277 # No user value, uncomment the following line to provide one.
6279 # value_source default
6283 # Behave like a ROM monitor
6284 # Enabling this option will allow RedBoot to provide ROM
6285 # monitor-style services to programs which it executes.
6287 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6288 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6289 # CYG_HAL_STARTUP == ROMRAM
6290 # CYG_HAL_STARTUP == ROMRAM
6293 # Calculated value: 1
6296 # Requires: CYGSEM_HAL_ROM_MONITOR
6297 # CYGSEM_HAL_ROM_MONITOR == 1
6301 # Allow RedBoot to handle GNUPro application 'syscalls'.
6302 # If this option is enabled then RedBoot will install a
6303 # syscall handler to support debugging of applications
6304 # based on GNUPro newlib/bsp.
6306 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6308 # No user value, uncomment the following line to provide one.
6310 # value_source default
6313 # The following properties are affected by this value
6314 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6315 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6316 # option CYGPKG_HAL_GDB_FILEIO
6317 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6321 # Support additional syscalls for 'gprof' profiling
6322 # Support additional syscalls to support a periodic callback
6323 # function for histogram-style profiling, and an enquire/set
6325 # The application must use the GNUPro newlib facilities
6328 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6329 # This option is not active
6330 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6331 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6332 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6336 # No user value, uncomment the following line to provide one.
6338 # value_source default
6342 # Does the HAL support 'gprof' profiling?
6344 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6345 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6346 # This option is not active
6347 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6349 # This value cannot be modified here.
6353 # The following properties are affected by this value
6354 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6355 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6358 # Do not raise SIGTRAP when program exits
6359 # For some (single shot) newlib based programs,
6360 # exiting and returning a termination status may be
6361 # the normal expected behavior.
6363 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6364 # This option is not active
6365 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6368 # No user value, uncomment the following line to provide one.
6370 # value_source default
6375 # Use a common buffer for Zlib and FIS
6376 # Use a common memory buffer for both the zlib workspace
6377 # and FIS directory operations. This can save a substantial
6378 # amount of RAM, especially when flash sectors are large.
6380 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6381 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6382 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6383 # CYGOPT_REDBOOT_FIS == 1
6387 # No user value, uncomment the following line to provide one.
6389 # value_source default
6394 # Size of Zlib/FIS common buffer
6395 # Size of common buffer to allocate. Must be at least the
6396 # size of one flash sector.
6398 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6399 # This option is not active
6400 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6403 # No user value, uncomment the following line to provide one.
6404 # user_value 0x0000C000
6405 # value_source default
6406 # Default value: 0x0000C000
6407 # Legal values: 0x4000 to 0x80000000
6411 # Buffer size in getc when loading images
6412 # When loading images a buffer is used between redboot and the
6413 # underlying storage medium, eg a filesystem, or a socket etc.
6414 # The size of this buffer can have a big impart on load speed.
6416 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6418 # No user value, uncomment the following line to provide one.
6420 # value_source default
6421 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6422 # CYGPKG_REDBOOT_FILEIO == 0
6427 # Redboot for ARM options
6428 # This option lists the target's requirements for a valid Redboot
6431 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6432 # ActiveIf constraint: CYGPKG_REDBOOT
6433 # CYGPKG_REDBOOT == current
6436 # There is no associated value.
6438 # The following properties are affected by this value
6442 # Provide the exec command in RedBoot
6443 # This option contains requirements for booting linux
6444 # from RedBoot. The component is enabled/disabled from
6447 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6448 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6449 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6452 # There is no associated value.
6456 # Enable -x switch for exec command.
6457 # This option allows bi-endian platforms to launch kernels
6458 # built for an endianess different than the RedBoot endianess
6460 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6462 # No user value, uncomment the following line to provide one.
6464 # value_source default
6468 # Physical base address of linux kernel
6469 # This is the physical address of the base of the
6470 # Linux kernel image.
6472 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6474 # No user value, uncomment the following line to provide one.
6475 # user_value 0x70108000
6476 # value_source default
6477 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6478 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6482 # Default physical base address of linux kernel
6483 # This is the physical address of the base of the
6484 # Linux kernel image. This option gets set by the
6487 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6489 # No user value, uncomment the following line to provide one.
6490 # user_value 0x00008000
6491 # The inferred value should not be edited directly.
6492 inferred_value 0x70108000
6493 # value_source inferred
6494 # Default value: 0x00008000
6496 # The following properties are affected by this value
6497 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6498 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6499 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6500 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6503 # Base address of linux kernel parameter tags
6504 # This is the base address of the area of memory used to
6505 # pass parameters to the Linux kernel. This should be chosen
6506 # to avoid overlap with the kernel and any ramdisk image.
6508 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6510 # No user value, uncomment the following line to provide one.
6511 # user_value 0x00000100
6512 # value_source default
6513 # Default value: 0x00000100
6518 # Redboot HAL options
6519 # This option lists the target's requirements for a valid Redboot
6522 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6523 # ActiveIf constraint: CYGPKG_REDBOOT
6524 # CYGPKG_REDBOOT == current
6527 # There is no associated value.
6531 # Build Redboot ROM binary image
6532 # This option enables the conversion of the Redboot ELF
6533 # image to a binary image suitable for ROM programming.
6535 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6536 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6537 # CYGBLD_BUILD_REDBOOT == 1
6541 # No user value, uncomment the following line to provide one.
6543 # value_source default
6548 # Redboot HAL variant options
6550 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6551 # ActiveIf constraint: CYGPKG_REDBOOT
6552 # CYGPKG_REDBOOT == current
6555 # There is no associated value.
6556 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6557 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6562 # ISO C and POSIX infrastructure
6563 # eCos supports implementations of ISO C libraries and POSIX
6564 # implementations. This package provides infrastructure used by
6565 # all such implementations.
6567 cdl_package CYGPKG_ISOINFRA {
6568 # Packages cannot be added or removed, nor can their version be changed,
6569 # simply by editing their value. Instead the appropriate configuration
6570 # should be used to perform these actions.
6572 # This value cannot be modified here.
6574 # Current value: 1 current
6576 # The following properties are affected by this value
6577 # component CYGBLD_BUILD_REDBOOT
6578 # Requires: CYGPKG_ISOINFRA
6579 # package CYGPKG_LIBC_STRING
6580 # Requires: CYGPKG_ISOINFRA
6581 # package CYGPKG_COMPRESS_ZLIB
6582 # Requires: CYGPKG_ISOINFRA
6583 # package CYGPKG_IO_FLASH
6584 # Requires: CYGPKG_ISOINFRA
6585 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6586 # Requires: CYGPKG_ISOINFRA
6587 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6588 # DefaultValue: 0 != CYGPKG_ISOINFRA
6589 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6590 # ActiveIf: CYGPKG_ISOINFRA
6591 # package CYGPKG_LIBC_I18N
6592 # Requires: CYGPKG_ISOINFRA
6593 # package CYGPKG_LIBC_STDLIB
6594 # Requires: CYGPKG_ISOINFRA
6598 # Startup and termination
6600 cdl_component CYGPKG_ISO_STARTUP {
6601 # There is no associated value.
6605 # main() startup implementations
6606 # Implementations of this interface arrange for a user-supplied
6607 # main() to be called in an ISO compatible environment.
6609 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6610 # No options implement this inferface
6611 # This value cannot be modified here.
6614 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6615 # CYGINT_ISO_MAIN_STARTUP == 0
6618 # The following properties are affected by this value
6619 # interface CYGINT_ISO_MAIN_STARTUP
6620 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6623 # environ implementations
6624 # Implementations of this interface provide the environ
6625 # variable required by POSIX.
6627 cdl_interface CYGINT_ISO_ENVIRON {
6628 # No options implement this inferface
6629 # This value cannot be modified here.
6632 # Requires: 1 >= CYGINT_ISO_ENVIRON
6633 # CYGINT_ISO_ENVIRON == 0
6636 # The following properties are affected by this value
6637 # interface CYGINT_ISO_ENVIRON
6638 # Requires: 1 >= CYGINT_ISO_ENVIRON
6644 cdl_component CYGPKG_ISO_CTYPE_H {
6645 # There is no associated value.
6649 # Number of implementations of ctype functions
6651 cdl_interface CYGINT_ISO_CTYPE {
6652 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6653 # This value cannot be modified here.
6656 # Requires: 1 >= CYGINT_ISO_CTYPE
6657 # CYGINT_ISO_CTYPE == 1
6660 # The following properties are affected by this value
6661 # interface CYGINT_ISO_CTYPE
6662 # Requires: 1 >= CYGINT_ISO_CTYPE
6663 # package CYGPKG_HAL_ARM_TX53KARO
6664 # Requires: CYGINT_ISO_CTYPE
6665 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6666 # Requires: CYGINT_ISO_CTYPE
6667 # package CYGPKG_LIBC_STDLIB
6668 # Requires: CYGINT_ISO_CTYPE
6671 # Ctype implementation header
6673 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6675 # No user value, uncomment the following line to provide one.
6677 # The inferred value should not be edited directly.
6678 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6679 # value_source inferred
6680 # Default value: 0 0
6682 # The following properties are affected by this value
6683 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6684 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6685 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6686 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6692 cdl_component CYGPKG_ISO_ERRNO {
6693 # There is no associated value.
6697 # Number of implementations of error codes
6699 cdl_interface CYGINT_ISO_ERRNO_CODES {
6700 # Implemented by CYGPKG_ERROR, active, enabled
6701 # This value cannot be modified here.
6704 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6705 # CYGINT_ISO_ERRNO_CODES == 1
6708 # The following properties are affected by this value
6709 # interface CYGINT_ISO_ERRNO_CODES
6710 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6713 # Error codes implementation header
6715 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6717 # No user value, uncomment the following line to provide one.
6719 # The inferred value should not be edited directly.
6720 inferred_value 1 <cyg/error/codes.h>
6721 # value_source inferred
6722 # Default value: 0 0
6724 # The following properties are affected by this value
6725 # package CYGPKG_ERROR
6726 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6729 # Number of implementations of errno variable
6731 cdl_interface CYGINT_ISO_ERRNO {
6732 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6733 # This value cannot be modified here.
6736 # Requires: 1 >= CYGINT_ISO_ERRNO
6737 # CYGINT_ISO_ERRNO == 1
6740 # The following properties are affected by this value
6741 # interface CYGINT_ISO_ERRNO
6742 # Requires: 1 >= CYGINT_ISO_ERRNO
6745 # errno variable implementation header
6747 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6749 # No user value, uncomment the following line to provide one.
6751 # The inferred value should not be edited directly.
6752 inferred_value 1 <cyg/error/errno.h>
6753 # value_source inferred
6754 # Default value: 0 0
6756 # The following properties are affected by this value
6757 # component CYGPKG_ERROR_ERRNO
6758 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6762 # Locale-related functions
6764 cdl_component CYGPKG_ISO_LOCALE {
6765 # There is no associated value.
6769 # Number of implementations of locale functions
6771 cdl_interface CYGINT_ISO_LOCALE {
6772 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6773 # This value cannot be modified here.
6776 # Requires: 1 >= CYGINT_ISO_LOCALE
6777 # CYGINT_ISO_LOCALE == 1
6780 # The following properties are affected by this value
6781 # interface CYGINT_ISO_LOCALE
6782 # Requires: 1 >= CYGINT_ISO_LOCALE
6785 # Locale implementation header
6787 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6789 # No user value, uncomment the following line to provide one.
6791 # value_source default
6792 # Default value: 0 0
6796 # Standard I/O-related functionality
6798 cdl_component CYGPKG_ISO_STDIO {
6799 # There is no associated value.
6803 # Number of implementations of stdio file types
6805 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6806 # No options implement this inferface
6807 # This value cannot be modified here.
6809 # Current value: 0 0
6810 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6811 # CYGINT_ISO_STDIO_FILETYPES == 0
6814 # The following properties are affected by this value
6815 # interface CYGINT_ISO_STDIO_FILETYPES
6816 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6819 # Stdio file types implementation header
6821 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6823 # No user value, uncomment the following line to provide one.
6825 # value_source default
6826 # Default value: 0 0
6829 # Stdio standard streams implementations
6831 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6832 # No options implement this inferface
6833 # This value cannot be modified here.
6835 # Current value: 0 0
6836 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6837 # CYGINT_ISO_STDIO_STREAMS == 0
6840 # The following properties are affected by this value
6841 # interface CYGINT_ISO_STDIO_STREAMS
6842 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6845 # Stdio standard streams implementation header
6846 # This header file must define stdin, stdout
6849 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6851 # No user value, uncomment the following line to provide one.
6853 # value_source default
6854 # Default value: 0 0
6857 # Number of implementations of stdio file operations
6859 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6860 # No options implement this inferface
6861 # This value cannot be modified here.
6863 # Current value: 0 0
6864 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6865 # CYGINT_ISO_STDIO_FILEOPS == 0
6868 # The following properties are affected by this value
6869 # interface CYGINT_ISO_STDIO_FILEOPS
6870 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6873 # Stdio file operations implementation header
6874 # This header controls the file system operations on a file
6875 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6878 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6880 # No user value, uncomment the following line to provide one.
6882 # value_source default
6883 # Default value: 0 0
6886 # Number of implementations of stdio file access functionals
6888 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6889 # No options implement this inferface
6890 # This value cannot be modified here.
6892 # Current value: 0 0
6893 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6894 # CYGINT_ISO_STDIO_FILEACCESS == 0
6897 # The following properties are affected by this value
6898 # interface CYGINT_ISO_STDIO_FILEACCESS
6899 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6900 # option CYGFUN_COMPRESS_ZLIB_GZIO
6901 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6904 # Stdio file access implementation header
6905 # This header controls the file access operations
6906 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6907 # setvbuf(), and associated constants.
6909 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6911 # No user value, uncomment the following line to provide one.
6913 # value_source default
6914 # Default value: 0 0
6917 # Number of implementations of stdio formatted I/O
6919 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6920 # No options implement this inferface
6921 # This value cannot be modified here.
6923 # Current value: 0 0
6924 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6925 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6928 # The following properties are affected by this value
6929 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6930 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6931 # option CYGFUN_COMPRESS_ZLIB_GZIO
6932 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6935 # Stdio formatted I/O implementation header
6937 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6939 # No user value, uncomment the following line to provide one.
6941 # value_source default
6942 # Default value: 0 0
6945 # Number of implementations of stdio character I/O
6947 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6948 # No options implement this inferface
6949 # This value cannot be modified here.
6951 # Current value: 0 0
6952 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6953 # CYGINT_ISO_STDIO_CHAR_IO == 0
6956 # The following properties are affected by this value
6957 # interface CYGINT_ISO_STDIO_CHAR_IO
6958 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6961 # Stdio character I/O implementation header
6963 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6965 # No user value, uncomment the following line to provide one.
6967 # value_source default
6968 # Default value: 0 0
6971 # Number of implementations of stdio direct I/O
6973 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6974 # No options implement this inferface
6975 # This value cannot be modified here.
6977 # Current value: 0 0
6978 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6979 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6982 # The following properties are affected by this value
6983 # interface CYGINT_ISO_STDIO_DIRECT_IO
6984 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6987 # Stdio direct I/O implementation header
6989 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6991 # No user value, uncomment the following line to provide one.
6993 # value_source default
6994 # Default value: 0 0
6997 # Number of implementations of stdio file positioning
6999 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
7000 # No options implement this inferface
7001 # This value cannot be modified here.
7003 # Current value: 0 0
7004 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7005 # CYGINT_ISO_STDIO_FILEPOS == 0
7008 # The following properties are affected by this value
7009 # interface CYGINT_ISO_STDIO_FILEPOS
7010 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
7011 # option CYGFUN_COMPRESS_ZLIB_GZIO
7012 # Requires: CYGINT_ISO_STDIO_FILEPOS
7015 # Stdio file positioning implementation header
7017 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
7019 # No user value, uncomment the following line to provide one.
7021 # value_source default
7022 # Default value: 0 0
7025 # Number of implementations of stdio error handling
7027 cdl_interface CYGINT_ISO_STDIO_ERROR {
7028 # No options implement this inferface
7029 # This value cannot be modified here.
7031 # Current value: 0 0
7032 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7033 # CYGINT_ISO_STDIO_ERROR == 0
7036 # The following properties are affected by this value
7037 # interface CYGINT_ISO_STDIO_ERROR
7038 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7041 # Stdio error handling implementation header
7043 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7045 # No user value, uncomment the following line to provide one.
7047 # value_source default
7048 # Default value: 0 0
7051 # POSIX fd-related function implementations
7053 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7054 # No options implement this inferface
7055 # This value cannot be modified here.
7057 # Current value: 0 0
7058 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7059 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7062 # The following properties are affected by this value
7063 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7064 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7067 # POSIX fd-related function implementation header
7069 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7071 # No user value, uncomment the following line to provide one.
7073 # value_source default
7074 # Default value: 0 0
7078 # Standard general utility functions
7080 cdl_component CYGPKG_ISO_STDLIB {
7081 # There is no associated value.
7085 # String conversion function implementations
7087 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7088 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7089 # This value cannot be modified here.
7092 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7093 # CYGINT_ISO_STDLIB_STRCONV == 1
7096 # The following properties are affected by this value
7097 # interface CYGINT_ISO_STDLIB_STRCONV
7098 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7101 # String conversion function implementation header
7103 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7105 # No user value, uncomment the following line to provide one.
7107 # The inferred value should not be edited directly.
7108 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7109 # value_source inferred
7110 # Default value: 0 0
7112 # The following properties are affected by this value
7113 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7114 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7117 # String to FP conversion function implementations
7119 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7120 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7121 # This value cannot be modified here.
7124 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7125 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7128 # The following properties are affected by this value
7129 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7130 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7133 # String to FP conversion function implementation header
7135 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7137 # No user value, uncomment the following line to provide one.
7139 # value_source default
7140 # Default value: 0 0
7143 # Random number generator implementations
7145 cdl_interface CYGINT_ISO_RAND {
7146 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7147 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7148 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7149 # This value cannot be modified here.
7152 # Requires: 1 >= CYGINT_ISO_RAND
7153 # CYGINT_ISO_RAND == 1
7156 # The following properties are affected by this value
7157 # interface CYGINT_ISO_RAND
7158 # Requires: 1 >= CYGINT_ISO_RAND
7161 # Random number generator implementation header
7163 cdl_option CYGBLD_ISO_RAND_HEADER {
7165 # No user value, uncomment the following line to provide one.
7167 # value_source default
7168 # Default value: 0 0
7171 # Malloc implementations
7173 cdl_interface CYGINT_ISO_MALLOC {
7174 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7175 # This value cannot be modified here.
7178 # Requires: 1 >= CYGINT_ISO_MALLOC
7179 # CYGINT_ISO_MALLOC == 1
7182 # The following properties are affected by this value
7183 # interface CYGINT_ISO_MALLOC
7184 # Requires: 1 >= CYGINT_ISO_MALLOC
7185 # option CYGFUN_LIBC_STRING_STRDUP
7186 # ActiveIf: CYGINT_ISO_MALLOC
7189 # Malloc implementation header
7191 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7193 # No user value, uncomment the following line to provide one.
7195 # value_source default
7196 # Default value: 0 0
7199 # Mallinfo() implementations
7201 cdl_interface CYGINT_ISO_MALLINFO {
7202 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7203 # This value cannot be modified here.
7206 # Requires: 1 >= CYGINT_ISO_MALLINFO
7207 # CYGINT_ISO_MALLINFO == 1
7210 # The following properties are affected by this value
7211 # interface CYGINT_ISO_MALLINFO
7212 # Requires: 1 >= CYGINT_ISO_MALLINFO
7215 # Mallinfo() implementation header
7217 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7219 # No user value, uncomment the following line to provide one.
7221 # value_source default
7222 # Default value: 0 0
7225 # Program exit functionality implementations
7227 cdl_interface CYGINT_ISO_EXIT {
7228 # No options implement this inferface
7229 # This value cannot be modified here.
7232 # Requires: 1 >= CYGINT_ISO_EXIT
7233 # CYGINT_ISO_EXIT == 0
7236 # The following properties are affected by this value
7237 # interface CYGINT_ISO_EXIT
7238 # Requires: 1 >= CYGINT_ISO_EXIT
7239 # option CYGFUN_INFRA_DUMMY_ABORT
7240 # Requires: !CYGINT_ISO_EXIT
7241 # option CYGFUN_INFRA_DUMMY_ABORT
7242 # DefaultValue: CYGINT_ISO_EXIT == 0
7245 # Program exit functionality implementation header
7247 cdl_option CYGBLD_ISO_EXIT_HEADER {
7249 # No user value, uncomment the following line to provide one.
7251 # value_source default
7252 # Default value: 0 0
7255 # Program environment implementations
7257 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7258 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7259 # This value cannot be modified here.
7262 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7263 # CYGINT_ISO_STDLIB_ENVIRON == 1
7266 # The following properties are affected by this value
7267 # interface CYGINT_ISO_STDLIB_ENVIRON
7268 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7271 # Program environment implementation header
7273 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7275 # No user value, uncomment the following line to provide one.
7277 # value_source default
7278 # Default value: 0 0
7281 # system() implementations
7283 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7284 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7285 # This value cannot be modified here.
7288 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7289 # CYGINT_ISO_STDLIB_SYSTEM == 1
7292 # The following properties are affected by this value
7293 # interface CYGINT_ISO_STDLIB_SYSTEM
7294 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7297 # system() implementation header
7299 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7301 # No user value, uncomment the following line to provide one.
7303 # value_source default
7304 # Default value: 0 0
7307 # bsearch() implementations
7309 cdl_interface CYGINT_ISO_BSEARCH {
7310 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7311 # This value cannot be modified here.
7314 # Requires: 1 >= CYGINT_ISO_BSEARCH
7315 # CYGINT_ISO_BSEARCH == 1
7318 # The following properties are affected by this value
7319 # interface CYGINT_ISO_BSEARCH
7320 # Requires: 1 >= CYGINT_ISO_BSEARCH
7323 # bsearch() implementation header
7325 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7327 # No user value, uncomment the following line to provide one.
7329 # value_source default
7330 # Default value: 0 0
7333 # qsort() implementations
7335 cdl_interface CYGINT_ISO_QSORT {
7336 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7337 # This value cannot be modified here.
7340 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7341 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7344 # The following properties are affected by this value
7347 # qsort() implementation header
7349 cdl_option CYGBLD_ISO_QSORT_HEADER {
7351 # No user value, uncomment the following line to provide one.
7353 # value_source default
7354 # Default value: 0 0
7357 # abs()/labs() implementations
7359 cdl_interface CYGINT_ISO_ABS {
7360 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7361 # This value cannot be modified here.
7364 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7365 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7368 # The following properties are affected by this value
7371 # abs()/labs() implementation header
7373 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7375 # No user value, uncomment the following line to provide one.
7377 # The inferred value should not be edited directly.
7378 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7379 # value_source inferred
7380 # Default value: 0 0
7382 # The following properties are affected by this value
7383 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7384 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7387 # div()/ldiv() implementations
7389 cdl_interface CYGINT_ISO_DIV {
7390 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7391 # This value cannot be modified here.
7394 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7395 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7398 # The following properties are affected by this value
7401 # div()/ldiv() implementation header
7403 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7405 # No user value, uncomment the following line to provide one.
7407 # The inferred value should not be edited directly.
7408 inferred_value 1 <cyg/libc/stdlib/div.inl>
7409 # value_source inferred
7410 # Default value: 0 0
7412 # The following properties are affected by this value
7413 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7414 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7417 # Header defining the implementation's MB_CUR_MAX
7419 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7421 # No user value, uncomment the following line to provide one.
7423 # value_source default
7424 # Default value: 0 0
7426 # The following properties are affected by this value
7427 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7428 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7431 # Multibyte character implementations
7433 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7434 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7435 # This value cannot be modified here.
7438 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7439 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7442 # The following properties are affected by this value
7443 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7444 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7447 # Multibyte character implementation header
7449 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7451 # No user value, uncomment the following line to provide one.
7453 # value_source default
7454 # Default value: 0 0
7460 cdl_component CYGPKG_ISO_STRING {
7461 # There is no associated value.
7465 # Number of implementations of strerror() function
7467 cdl_interface CYGINT_ISO_STRERROR {
7468 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7469 # This value cannot be modified here.
7471 # Current value: 1 1
7472 # Requires: 1 >= CYGINT_ISO_STRERROR
7473 # CYGINT_ISO_STRERROR == 1
7476 # The following properties are affected by this value
7477 # interface CYGINT_ISO_STRERROR
7478 # Requires: 1 >= CYGINT_ISO_STRERROR
7481 # strerror() implementation header
7483 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7485 # No user value, uncomment the following line to provide one.
7487 # The inferred value should not be edited directly.
7488 inferred_value 1 <cyg/error/strerror.h>
7489 # value_source inferred
7490 # Default value: 0 0
7492 # The following properties are affected by this value
7493 # option CYGPKG_ERROR_STRERROR
7494 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7497 # memcpy() implementation header
7499 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7501 # No user value, uncomment the following line to provide one.
7503 # value_source default
7504 # Default value: 0 0
7507 # memset() implementation header
7509 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7511 # No user value, uncomment the following line to provide one.
7513 # value_source default
7514 # Default value: 0 0
7517 # Number of implementations of strtok_r() function
7519 cdl_interface CYGINT_ISO_STRTOK_R {
7520 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7521 # This value cannot be modified here.
7523 # Current value: 1 1
7524 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7525 # CYGINT_ISO_STRTOK_R == 1
7528 # The following properties are affected by this value
7529 # interface CYGINT_ISO_STRTOK_R
7530 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7533 # strtok_r() implementation header
7535 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7537 # No user value, uncomment the following line to provide one.
7539 # The inferred value should not be edited directly.
7540 inferred_value 1 <cyg/libc/string/string.h>
7541 # value_source inferred
7542 # Default value: 0 0
7544 # The following properties are affected by this value
7545 # package CYGPKG_LIBC_STRING
7546 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7549 # Number of implementations of locale-specific string functions
7550 # This covers locale-dependent string functions such as strcoll()
7553 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7554 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7555 # This value cannot be modified here.
7557 # Current value: 1 1
7558 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7559 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7562 # The following properties are affected by this value
7563 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7564 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7567 # Locale-specific string functions' implementation header
7568 # This covers locale-dependent string functions such as strcoll()
7571 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7573 # No user value, uncomment the following line to provide one.
7575 # The inferred value should not be edited directly.
7576 inferred_value 1 <cyg/libc/string/string.h>
7577 # value_source inferred
7578 # Default value: 0 0
7580 # The following properties are affected by this value
7581 # package CYGPKG_LIBC_STRING
7582 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7585 # Number of implementations of BSD string functions
7587 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7588 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7589 # This value cannot be modified here.
7591 # Current value: 0 0
7592 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7593 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7596 # The following properties are affected by this value
7597 # interface CYGINT_ISO_STRING_BSD_FUNCS
7598 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7601 # BSD string functions' implementation header
7603 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7605 # No user value, uncomment the following line to provide one.
7607 # The inferred value should not be edited directly.
7608 inferred_value 1 <cyg/libc/string/bsdstring.h>
7609 # value_source inferred
7610 # Default value: 0 0
7612 # The following properties are affected by this value
7613 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7614 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7617 # Number of implementations of other mem*() functions
7619 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7620 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7621 # This value cannot be modified here.
7623 # Current value: 1 1
7624 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7625 # CYGINT_ISO_STRING_MEMFUNCS == 1
7628 # The following properties are affected by this value
7629 # interface CYGINT_ISO_STRING_MEMFUNCS
7630 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7631 # component CYGBLD_BUILD_REDBOOT
7632 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7633 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7634 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7637 # Other mem*() functions' implementation header
7639 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7641 # No user value, uncomment the following line to provide one.
7643 # The inferred value should not be edited directly.
7644 inferred_value 1 <cyg/libc/string/string.h>
7645 # value_source inferred
7646 # Default value: 0 0
7648 # The following properties are affected by this value
7649 # package CYGPKG_LIBC_STRING
7650 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7653 # Number of implementations of other ISO C str*() functions
7654 # This covers the other str*() functions defined by ISO C.
7656 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7657 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7658 # This value cannot be modified here.
7660 # Current value: 1 1
7661 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7662 # CYGINT_ISO_STRING_STRFUNCS == 1
7665 # The following properties are affected by this value
7666 # interface CYGINT_ISO_STRING_STRFUNCS
7667 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7668 # option CYGFUN_INFRA_DUMMY_STRLEN
7669 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7670 # option CYGFUN_INFRA_DUMMY_STRLEN
7671 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7672 # component CYGBLD_BUILD_REDBOOT
7673 # Requires: CYGINT_ISO_STRING_STRFUNCS
7674 # component CYGPKG_IO_ETH_DRIVERS_NET
7675 # Requires: CYGINT_ISO_STRING_STRFUNCS
7676 # option CYGFUN_COMPRESS_ZLIB_GZIO
7677 # Requires: CYGINT_ISO_STRING_STRFUNCS
7678 # package CYGPKG_IO_FLASH
7679 # Requires: CYGINT_ISO_STRING_STRFUNCS
7680 # package CYGPKG_LIBC_STDLIB
7681 # Requires: CYGINT_ISO_STRING_STRFUNCS
7684 # Other ISO C str*() functions' implementation header
7685 # This covers the other str*() functions defined by ISO C.
7687 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7689 # No user value, uncomment the following line to provide one.
7691 # The inferred value should not be edited directly.
7692 inferred_value 1 <cyg/libc/string/string.h>
7693 # value_source inferred
7694 # Default value: 0 0
7696 # The following properties are affected by this value
7697 # package CYGPKG_LIBC_STRING
7698 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7702 # Clock and time functionality
7704 cdl_component CYGPKG_ISO_TIME {
7705 # There is no associated value.
7709 # time_t implementation header
7711 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7713 # No user value, uncomment the following line to provide one.
7715 # value_source default
7716 # Default value: 0 0
7719 # clock_t implementation header
7721 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7723 # No user value, uncomment the following line to provide one.
7725 # value_source default
7726 # Default value: 0 0
7729 # struct timeval implementation header
7731 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7733 # No user value, uncomment the following line to provide one.
7735 # value_source default
7736 # Default value: 0 0
7739 # fnmatch implementation header
7741 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7743 # No user value, uncomment the following line to provide one.
7745 # value_source default
7746 # Default value: 0 0
7749 # Number of implementations of POSIX timer types
7751 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7752 # No options implement this inferface
7753 # This value cannot be modified here.
7755 # Current value: 0 0
7756 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7757 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7760 # The following properties are affected by this value
7761 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7762 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7765 # POSIX timer types implementation header
7767 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7769 # No user value, uncomment the following line to provide one.
7771 # value_source default
7772 # Default value: 0 0
7775 # Number of implementations of POSIX clock types
7777 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7778 # No options implement this inferface
7779 # This value cannot be modified here.
7781 # Current value: 0 0
7782 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7783 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7786 # The following properties are affected by this value
7787 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7788 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7791 # POSIX clock types implementation header
7793 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7795 # No user value, uncomment the following line to provide one.
7797 # value_source default
7798 # Default value: 0 0
7801 # Number of implementations of ISO C types
7803 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7804 # No options implement this inferface
7805 # This value cannot be modified here.
7807 # Current value: 0 0
7808 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7809 # CYGINT_ISO_C_TIME_TYPES == 0
7812 # The following properties are affected by this value
7813 # interface CYGINT_ISO_C_TIME_TYPES
7814 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7817 # ISO C time types implementation header
7819 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7821 # No user value, uncomment the following line to provide one.
7823 # value_source default
7824 # Default value: 0 0
7827 # Number of implementations of POSIX timers
7829 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7830 # No options implement this inferface
7831 # This value cannot be modified here.
7833 # Current value: 0 0
7834 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7835 # CYGINT_ISO_POSIX_TIMERS == 0
7838 # The following properties are affected by this value
7839 # interface CYGINT_ISO_POSIX_TIMERS
7840 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7843 # POSIX timer implementation header
7845 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7847 # No user value, uncomment the following line to provide one.
7849 # value_source default
7850 # Default value: 0 0
7853 # Number of implementations of POSIX clocks
7855 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7856 # No options implement this inferface
7857 # This value cannot be modified here.
7859 # Current value: 0 0
7860 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7861 # CYGINT_ISO_POSIX_CLOCKS == 0
7864 # The following properties are affected by this value
7865 # interface CYGINT_ISO_POSIX_CLOCKS
7866 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7869 # POSIX clocks implementation header
7871 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7873 # No user value, uncomment the following line to provide one.
7875 # value_source default
7876 # Default value: 0 0
7879 # Number of implementations of ISO C clock functions
7881 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7882 # No options implement this inferface
7883 # This value cannot be modified here.
7885 # Current value: 0 0
7886 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7887 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7890 # The following properties are affected by this value
7891 # interface CYGINT_ISO_C_CLOCK_FUNCS
7892 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7895 # ISO C clock functions' implementation header
7897 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7899 # No user value, uncomment the following line to provide one.
7901 # value_source default
7902 # Default value: 0 0
7905 # Number of implementations of tzset() function
7907 cdl_interface CYGINT_ISO_TZSET {
7908 # No options implement this inferface
7909 # This value cannot be modified here.
7911 # Current value: 0 0
7912 # Requires: 1 >= CYGINT_ISO_TZSET
7913 # CYGINT_ISO_TZSET == 0
7916 # The following properties are affected by this value
7917 # interface CYGINT_ISO_TZSET
7918 # Requires: 1 >= CYGINT_ISO_TZSET
7921 # tzset() implementation header
7923 cdl_option CYGBLD_ISO_TZSET_HEADER {
7925 # No user value, uncomment the following line to provide one.
7927 # value_source default
7928 # Default value: 0 0
7932 # Signal functionality
7934 cdl_component CYGPKG_ISO_SIGNAL {
7935 # There is no associated value.
7939 # Number of implementations of signal numbers
7941 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7942 # No options implement this inferface
7943 # This value cannot be modified here.
7946 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7947 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7950 # The following properties are affected by this value
7951 # interface CYGINT_ISO_SIGNAL_NUMBERS
7952 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7955 # Signal numbering implementation header
7956 # This header provides the mapping of signal
7957 # names (e.g. SIGBUS) to numbers.
7959 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7961 # No user value, uncomment the following line to provide one.
7963 # value_source default
7964 # Default value: 0 0
7967 # Number of signal implementations
7969 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7970 # No options implement this inferface
7971 # This value cannot be modified here.
7974 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7975 # CYGINT_ISO_SIGNAL_IMPL == 0
7978 # The following properties are affected by this value
7979 # interface CYGINT_ISO_SIGNAL_IMPL
7980 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7983 # Signals implementation header
7985 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7987 # No user value, uncomment the following line to provide one.
7989 # value_source default
7990 # Default value: 0 0
7993 # POSIX real time signals feature test macro
7994 # This defines the POSIX feature test macro
7995 # that indicates that the POSIX real time signals
7998 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7999 # No options implement this inferface
8000 # This value cannot be modified here.
8003 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8004 # CYGINT_POSIX_REALTIME_SIGNALS == 0
8007 # The following properties are affected by this value
8008 # interface CYGINT_POSIX_REALTIME_SIGNALS
8009 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
8013 # Non-local jumps functionality
8015 cdl_component CYGPKG_ISO_SETJMP {
8016 # There is no associated value.
8020 # setjmp() / longjmp() implementations
8022 cdl_interface CYGINT_ISO_SETJMP {
8023 # No options implement this inferface
8024 # This value cannot be modified here.
8027 # Requires: 1 >= CYGINT_ISO_SETJMP
8028 # CYGINT_ISO_SETJMP == 0
8031 # The following properties are affected by this value
8032 # interface CYGINT_ISO_SETJMP
8033 # Requires: 1 >= CYGINT_ISO_SETJMP
8036 # setjmp() / longjmp() implementation header
8038 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8040 # No user value, uncomment the following line to provide one.
8042 # value_source default
8043 # Default value: 0 0
8046 # sigsetjmp() / siglongjmp() implementations
8048 cdl_interface CYGINT_ISO_SIGSETJMP {
8049 # No options implement this inferface
8050 # This value cannot be modified here.
8053 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8054 # CYGINT_ISO_SIGSETJMP == 0
8057 # The following properties are affected by this value
8058 # interface CYGINT_ISO_SIGSETJMP
8059 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8062 # sigsetjmp() / siglongjmp() implementation header
8064 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8066 # No user value, uncomment the following line to provide one.
8068 # value_source default
8069 # Default value: 0 0
8073 # Assertions implementation header
8075 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8077 # No user value, uncomment the following line to provide one.
8079 # value_source default
8080 # Default value: 0 0
8083 # POSIX file control
8084 # This covers the POSIX file control definitions,
8085 # normally found in <fcntl.h>
8087 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8088 # There is no associated value.
8092 # POSIX open flags implementation header
8094 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8096 # No user value, uncomment the following line to provide one.
8098 # value_source default
8099 # Default value: 0 0
8102 # POSIX fcntl() implementations
8104 cdl_interface CYGINT_ISO_FCNTL {
8105 # No options implement this inferface
8106 # This value cannot be modified here.
8109 # Requires: 1 >= CYGINT_ISO_FCNTL
8110 # CYGINT_ISO_FCNTL == 0
8113 # The following properties are affected by this value
8114 # interface CYGINT_ISO_FCNTL
8115 # Requires: 1 >= CYGINT_ISO_FCNTL
8118 # POSIX fcntl() implementation header
8120 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8122 # No user value, uncomment the following line to provide one.
8124 # value_source default
8125 # Default value: 0 0
8128 # POSIX file open implementations
8130 cdl_interface CYGINT_ISO_OPEN {
8131 # No options implement this inferface
8132 # This value cannot be modified here.
8135 # Requires: 1 >= CYGINT_ISO_OPEN
8136 # CYGINT_ISO_OPEN == 0
8139 # The following properties are affected by this value
8140 # interface CYGINT_ISO_OPEN
8141 # Requires: 1 >= CYGINT_ISO_OPEN
8144 # POSIX file open implementation header
8146 cdl_option CYGBLD_ISO_OPEN_HEADER {
8148 # No user value, uncomment the following line to provide one.
8150 # value_source default
8151 # Default value: 0 0
8155 # <sys/stat.h> definitions implementation header
8157 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8159 # No user value, uncomment the following line to provide one.
8161 # value_source default
8162 # Default value: 0 0
8165 # POSIX directory reading implementation
8167 cdl_interface CYGINT_ISO_DIRENT {
8168 # No options implement this inferface
8169 # This value cannot be modified here.
8172 # Requires: 1 >= CYGINT_ISO_DIRENT
8173 # CYGINT_ISO_DIRENT == 0
8176 # The following properties are affected by this value
8177 # interface CYGINT_ISO_DIRENT
8178 # Requires: 1 >= CYGINT_ISO_DIRENT
8181 # <dirent.h> definitions implementation header
8183 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8185 # No user value, uncomment the following line to provide one.
8187 # value_source default
8188 # Default value: 0 0
8191 # POSIX <sys/types.h> contents
8192 # This covers the types required by POSIX to be in
8195 cdl_component CYGPKG_ISO_POSIX_TYPES {
8196 # There is no associated value.
8200 # POSIX thread types implementations
8202 cdl_interface CYGINT_ISO_PTHREADTYPES {
8203 # No options implement this inferface
8204 # This value cannot be modified here.
8207 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8208 # CYGINT_ISO_PTHREADTYPES == 0
8211 # The following properties are affected by this value
8212 # interface CYGINT_ISO_PTHREADTYPES
8213 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8214 # interface CYGINT_ISO_PMUTEXTYPES
8215 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8218 # POSIX thread types implementation header
8220 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8222 # No user value, uncomment the following line to provide one.
8224 # value_source default
8225 # Default value: 0 0
8228 # POSIX mutex types implementations
8230 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8231 # No options implement this inferface
8232 # This value cannot be modified here.
8235 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8236 # CYGINT_ISO_PTHREADTYPES == 0
8240 # POSIX mutex types implementation header
8242 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8244 # No user value, uncomment the following line to provide one.
8246 # value_source default
8247 # Default value: 0 0
8250 # ssize_t implementation header
8252 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8254 # No user value, uncomment the following line to provide one.
8256 # value_source default
8257 # Default value: 0 0
8260 # Filesystem types implementation header
8262 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8264 # No user value, uncomment the following line to provide one.
8266 # value_source default
8267 # Default value: 0 0
8270 # gid_t, pid_t, uid_t implementation header
8272 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8274 # No user value, uncomment the following line to provide one.
8276 # value_source default
8277 # Default value: 0 0
8281 # Non-POSIX <sys/types.h> contents
8282 # This covers the extra types required by non-POSIX
8283 # packages to be in <sys/types.h>. These would normally
8284 # only be visible if _POSIX_SOURCE is not defined.
8286 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8287 # There is no associated value.
8291 # BSD compatible types
8293 cdl_interface CYGINT_ISO_BSDTYPES {
8294 # No options implement this inferface
8295 # This value cannot be modified here.
8298 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8299 # CYGINT_ISO_BSDTYPES == 0
8302 # The following properties are affected by this value
8303 # interface CYGINT_ISO_BSDTYPES
8304 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8309 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8311 # No user value, uncomment the following line to provide one.
8313 # value_source default
8314 # Default value: 0 0
8320 cdl_component CYGPKG_ISO_UTSNAME {
8321 # There is no associated value.
8327 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8329 # No user value, uncomment the following line to provide one.
8331 # value_source default
8332 # Default value: 0 0
8338 cdl_component CYGPKG_ISO_SCHED {
8339 # There is no associated value.
8343 # POSIX scheduler implementations
8345 cdl_interface CYGINT_ISO_SCHED_IMPL {
8346 # No options implement this inferface
8347 # This value cannot be modified here.
8350 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8351 # CYGINT_ISO_SCHED_IMPL == 0
8354 # The following properties are affected by this value
8355 # interface CYGINT_ISO_SCHED_IMPL
8356 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8359 # POSIX scheduler implementation header
8361 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8363 # No user value, uncomment the following line to provide one.
8365 # value_source default
8366 # Default value: 0 0
8372 cdl_component CYGPKG_ISO_SEMAPHORES {
8373 # There is no associated value.
8377 # POSIX semaphore implementations
8379 cdl_interface CYGINT_ISO_SEMAPHORES {
8380 # No options implement this inferface
8381 # This value cannot be modified here.
8384 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8385 # CYGINT_ISO_SEMAPHORES == 0
8388 # The following properties are affected by this value
8389 # interface CYGINT_ISO_SEMAPHORES
8390 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8393 # POSIX semaphore implementation header
8395 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8397 # No user value, uncomment the following line to provide one.
8399 # value_source default
8400 # Default value: 0 0
8404 # POSIX message queues
8406 cdl_component CYGPKG_ISO_MQUEUE {
8407 # There is no associated value.
8413 cdl_interface CYGINT_ISO_MQUEUE {
8414 # No options implement this inferface
8415 # This value cannot be modified here.
8418 # Requires: 1 >= CYGINT_ISO_MQUEUE
8419 # CYGINT_ISO_MQUEUE == 0
8422 # The following properties are affected by this value
8423 # interface CYGINT_ISO_MQUEUE
8424 # Requires: 1 >= CYGINT_ISO_MQUEUE
8425 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8426 # ActiveIf: CYGINT_ISO_MQUEUE
8427 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8428 # ActiveIf: CYGINT_ISO_MQUEUE
8431 # Implementation header
8433 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8435 # No user value, uncomment the following line to provide one.
8437 # value_source default
8438 # Default value: 0 0
8441 # Maximum number of open message queues
8443 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8444 # This option is not active
8445 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8446 # CYGINT_ISO_MQUEUE == 0
8450 # No user value, uncomment the following line to provide one.
8452 # value_source default
8453 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8454 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8455 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8459 # Maximum number of message priorities
8461 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8462 # This option is not active
8463 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8464 # CYGINT_ISO_MQUEUE == 0
8468 # No user value, uncomment the following line to provide one.
8469 # user_value 1 65535
8470 # value_source default
8471 # Default value: 1 65535
8477 cdl_component CYGPKG_ISO_PTHREAD {
8478 # There is no associated value.
8482 # POSIX pthread implementations
8484 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8485 # No options implement this inferface
8486 # This value cannot be modified here.
8488 # Current value: 0 0
8489 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8490 # CYGINT_ISO_PTHREAD_IMPL == 0
8493 # The following properties are affected by this value
8494 # interface CYGINT_ISO_PTHREAD_IMPL
8495 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8498 # POSIX pthread implementation header
8500 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8502 # No user value, uncomment the following line to provide one.
8504 # value_source default
8505 # Default value: 0 0
8508 # POSIX mutex/cond var implementations
8510 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8511 # No options implement this inferface
8512 # This value cannot be modified here.
8514 # Current value: 0 0
8515 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8516 # CYGINT_ISO_PTHREAD_MUTEX == 0
8519 # The following properties are affected by this value
8520 # interface CYGINT_ISO_PTHREAD_MUTEX
8521 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8524 # POSIX mutex/cond var implementation header
8526 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8528 # No user value, uncomment the following line to provide one.
8530 # value_source default
8531 # Default value: 0 0
8537 cdl_component CYGPKG_ISO_LIMITS {
8538 # There is no associated value.
8542 # POSIX pthread limits implementations
8544 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8545 # No options implement this inferface
8546 # This value cannot be modified here.
8549 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8550 # CYGINT_ISO_POSIX_LIMITS == 0
8553 # The following properties are affected by this value
8554 # interface CYGINT_ISO_POSIX_LIMITS
8555 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8558 # POSIX pthread limits implementation header
8560 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8562 # No user value, uncomment the following line to provide one.
8564 # value_source default
8565 # Default value: 0 0
8568 # OPEN_MAX implementation header
8570 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8572 # No user value, uncomment the following line to provide one.
8574 # value_source default
8575 # Default value: 0 0
8578 # LINK_MAX implementation header
8580 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8582 # No user value, uncomment the following line to provide one.
8584 # value_source default
8585 # Default value: 0 0
8588 # NAME_MAX implementation header
8590 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8592 # No user value, uncomment the following line to provide one.
8594 # value_source default
8595 # Default value: 0 0
8598 # PATH_MAX implementation header
8600 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8602 # No user value, uncomment the following line to provide one.
8604 # value_source default
8605 # Default value: 0 0
8611 cdl_component CYGPKG_ISO_TERMIOS {
8612 # There is no associated value.
8616 # POSIX termios implementations
8618 cdl_interface CYGINT_ISO_TERMIOS {
8619 # No options implement this inferface
8620 # This value cannot be modified here.
8623 # Requires: 1 >= CYGINT_ISO_TERMIOS
8624 # CYGINT_ISO_TERMIOS == 0
8627 # The following properties are affected by this value
8628 # interface CYGINT_ISO_TERMIOS
8629 # Requires: 1 >= CYGINT_ISO_TERMIOS
8632 # POSIX termios implementation header
8634 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8636 # No user value, uncomment the following line to provide one.
8638 # value_source default
8639 # Default value: 0 0
8645 cdl_component CYGPKG_ISO_DLFCN {
8646 # There is no associated value.
8650 # Dynamic load implementations
8652 cdl_interface CYGINT_ISO_DLFCN {
8653 # No options implement this inferface
8654 # This value cannot be modified here.
8657 # Requires: 1 >= CYGINT_ISO_DLFCN
8658 # CYGINT_ISO_DLFCN == 0
8661 # The following properties are affected by this value
8662 # interface CYGINT_ISO_DLFCN
8663 # Requires: 1 >= CYGINT_ISO_DLFCN
8666 # Dynamic load implementation header
8668 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8670 # No user value, uncomment the following line to provide one.
8672 # value_source default
8673 # Default value: 0 0
8677 # UNIX standard functions
8679 cdl_component CYGPKG_ISO_UNISTD {
8680 # There is no associated value.
8684 # POSIX timer operations implementations
8686 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8687 # No options implement this inferface
8688 # This value cannot be modified here.
8690 # Current value: 0 0
8691 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8692 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8695 # The following properties are affected by this value
8696 # interface CYGINT_ISO_POSIX_TIMER_OPS
8697 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8700 # POSIX timer operations implementation header
8702 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8704 # No user value, uncomment the following line to provide one.
8706 # value_source default
8707 # Default value: 0 0
8710 # POSIX sleep() implementations
8712 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8713 # No options implement this inferface
8714 # This value cannot be modified here.
8716 # Current value: 0 0
8717 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8718 # CYGINT_ISO_POSIX_SLEEP == 0
8721 # The following properties are affected by this value
8722 # interface CYGINT_ISO_POSIX_SLEEP
8723 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8726 # POSIX sleep() implementation header
8728 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8730 # No user value, uncomment the following line to provide one.
8732 # value_source default
8733 # Default value: 0 0
8737 # select()/poll() functions
8739 cdl_component CYGPKG_ISO_SELECT {
8740 # There is no associated value.
8744 # select() implementations
8746 cdl_interface CYGINT_ISO_SELECT {
8747 # No options implement this inferface
8748 # This value cannot be modified here.
8750 # Current value: 0 0
8751 # Requires: 1 >= CYGINT_ISO_SELECT
8752 # CYGINT_ISO_SELECT == 0
8755 # The following properties are affected by this value
8756 # interface CYGINT_ISO_SELECT
8757 # Requires: 1 >= CYGINT_ISO_SELECT
8760 # select() implementation header
8762 cdl_option CYGBLD_ISO_SELECT_HEADER {
8764 # No user value, uncomment the following line to provide one.
8766 # value_source default
8767 # Default value: 0 0
8770 # poll() implementations
8772 cdl_interface CYGINT_ISO_POLL {
8773 # No options implement this inferface
8774 # This value cannot be modified here.
8776 # Current value: 0 0
8777 # Requires: 1 >= CYGINT_ISO_POLL
8778 # CYGINT_ISO_POLL == 0
8781 # The following properties are affected by this value
8782 # interface CYGINT_ISO_POLL
8783 # Requires: 1 >= CYGINT_ISO_POLL
8786 # poll() implementation header
8788 cdl_option CYGBLD_ISO_POLL_HEADER {
8790 # No user value, uncomment the following line to provide one.
8792 # value_source default
8793 # Default value: 0 0
8797 # NetDB utility functions
8799 cdl_component CYGPKG_ISO_NETDB {
8800 # There is no associated value.
8804 # DNS implementations
8806 cdl_interface CYGINT_ISO_DNS {
8807 # No options implement this inferface
8808 # This value cannot be modified here.
8811 # Requires: 1 >= CYGINT_ISO_DNS
8812 # CYGINT_ISO_DNS == 0
8815 # The following properties are affected by this value
8816 # interface CYGINT_ISO_DNS
8817 # Requires: 1 >= CYGINT_ISO_DNS
8820 # DNS implementation header
8822 cdl_option CYGBLD_ISO_DNS_HEADER {
8824 # No user value, uncomment the following line to provide one.
8826 # value_source default
8827 # Default value: 0 0
8830 # Protocol network database implementations
8832 cdl_interface CYGINT_ISO_NETDB_PROTO {
8833 # No options implement this inferface
8834 # This value cannot be modified here.
8837 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8838 # CYGINT_ISO_NETDB_PROTO == 0
8841 # The following properties are affected by this value
8842 # interface CYGINT_ISO_NETDB_PROTO
8843 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8846 # Protocol network database implementation header
8848 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8850 # No user value, uncomment the following line to provide one.
8852 # value_source default
8853 # Default value: 0 0
8856 # Services network database implementations
8858 cdl_interface CYGINT_ISO_NETDB_SERV {
8859 # No options implement this inferface
8860 # This value cannot be modified here.
8863 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8864 # CYGINT_ISO_NETDB_SERV == 0
8867 # The following properties are affected by this value
8868 # interface CYGINT_ISO_NETDB_SERV
8869 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8872 # Services network database implementation header
8874 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8876 # No user value, uncomment the following line to provide one.
8878 # value_source default
8879 # Default value: 0 0
8884 # Package specific build options including control over
8885 # compiler flags used only in building this package,
8886 # and details of which tests are built.
8888 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8889 # There is no associated value.
8893 # Additional compiler flags
8894 # This option modifies the set of compiler flags for
8895 # building the ISO C and POSIX infrastructure package.
8896 # These flags are used in addition to the set of global flags.
8898 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8900 # No user value, uncomment the following line to provide one.
8902 # value_source default
8906 # Suppressed compiler flags
8907 # This option modifies the set of compiler flags for
8908 # building the ISO C and POSIX infrastructure package.
8909 # These flags are removed from the set of global flags
8912 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8914 # No user value, uncomment the following line to provide one.
8916 # value_source default
8923 # doc: ref/services-crc.html
8924 # This package provides support for CRC calculation. Currently
8925 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8926 # Gary S. Brown, and a 16 bit CRC.
8928 cdl_package CYGPKG_CRC {
8929 # Packages cannot be added or removed, nor can their version be changed,
8930 # simply by editing their value. Instead the appropriate configuration
8931 # should be used to perform these actions.
8933 # This value cannot be modified here.
8935 # Current value: 1 current
8937 # The following properties are affected by this value
8938 # package CYGPKG_COMPRESS_ZLIB
8939 # Requires: CYGPKG_CRC
8945 cdl_option CYGPKG_CRC_TESTS {
8946 # Calculated value: "tests/crc_test"
8948 # Current_value: tests/crc_test
8952 # Zlib compress and decompress package
8953 # This package provides support for compression and
8956 cdl_package CYGPKG_COMPRESS_ZLIB {
8957 # Packages cannot be added or removed, nor can their version be changed,
8958 # simply by editing their value. Instead the appropriate configuration
8959 # should be used to perform these actions.
8961 # This value cannot be modified here.
8963 # Current value: 1 current
8964 # Requires: CYGPKG_ISOINFRA
8965 # CYGPKG_ISOINFRA == current
8967 # Requires: CYGPKG_CRC
8968 # CYGPKG_CRC == current
8971 # The following properties are affected by this value
8972 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8973 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8977 # Override memory allocation routines.
8979 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8980 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8981 # This value cannot be modified here.
8985 # The following properties are affected by this value
8986 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8987 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8990 # Should deflate() produce 'gzip' compatible output?
8991 # If this option is set then the output of calling deflate()
8992 # will be wrapped up as a 'gzip' compatible file.
8994 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8996 # No user value, uncomment the following line to provide one.
8998 # value_source default
9002 # Does this library need malloc?
9003 # This pseudo-option will force the memalloc library to be
9004 # required iff the application does not provide it's own
9007 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
9008 # This option is not active
9009 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
9010 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
9014 # No user value, uncomment the following line to provide one.
9016 # value_source default
9018 # Requires: CYGPKG_MEMALLOC
9019 # CYGPKG_MEMALLOC == current
9023 # Include stdio-like utility functions
9024 # This option enables the stdio-like zlib utility functions
9025 # (gzread/gzwrite and friends) provided in gzio.c.
9027 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
9029 # No user value, uncomment the following line to provide one.
9031 # value_source default
9032 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
9033 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9035 # Requires: CYGINT_ISO_STDIO_FILEPOS
9036 # CYGINT_ISO_STDIO_FILEPOS == 0
9038 # Requires: CYGINT_ISO_STRING_STRFUNCS
9039 # CYGINT_ISO_STRING_STRFUNCS == 1
9041 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9042 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9044 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9045 # CYGINT_ISO_STDIO_FILEACCESS == 0
9049 # Zlib compress and decompress package build options
9050 # Package specific build options including control over
9051 # compiler flags used only in building this package,
9052 # and details of which tests are built.
9054 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9055 # There is no associated value.
9059 # Additional compiler flags
9060 # This option modifies the set of compiler flags for
9061 # building this package. These flags are used in addition
9062 # to the set of global flags.
9064 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9066 # No user value, uncomment the following line to provide one.
9067 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9068 # value_source default
9069 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9072 # Suppressed compiler flags
9073 # This option modifies the set of compiler flags for
9074 # building this package. These flags are removed from
9075 # the set of global flags if present.
9077 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9079 # No user value, uncomment the following line to provide one.
9080 # user_value -Wstrict-prototypes
9081 # value_source default
9082 # Default value: -Wstrict-prototypes
9085 # Additional compiler flags
9086 # This option modifies the set of compiler flags for
9087 # building this package. These flags are used in addition
9088 # to the set of global flags.
9090 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9092 # No user value, uncomment the following line to provide one.
9094 # value_source default
9098 # Suppressed compiler flags
9099 # This option modifies the set of compiler flags for
9100 # building this package. These flags are removed from
9101 # the set of global flags if present.
9103 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9105 # No user value, uncomment the following line to provide one.
9107 # value_source default
9114 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9115 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9117 # Current_value: tests/zlib1.c tests/zlib2.c
9121 # FLASH device drivers
9122 # doc: ref/flash.html
9123 # This option enables drivers for basic I/O services on
9126 cdl_package CYGPKG_IO_FLASH {
9127 # Packages cannot be added or removed, nor can their version be changed,
9128 # simply by editing their value. Instead the appropriate configuration
9129 # should be used to perform these actions.
9131 # This value cannot be modified here.
9133 # Current value: 1 current
9134 # Requires: CYGPKG_ISOINFRA
9135 # CYGPKG_ISOINFRA == current
9137 # Requires: CYGINT_ISO_STRING_STRFUNCS
9138 # CYGINT_ISO_STRING_STRFUNCS == 1
9141 # The following properties are affected by this value
9142 # component CYGSEM_REDBOOT_FLASH_CONFIG
9143 # DefaultValue: CYGPKG_IO_FLASH != 0
9144 # package CYGPKG_DEVS_FLASH_ONMXC
9145 # ActiveIf: CYGPKG_IO_FLASH
9149 # Hardware FLASH device drivers
9150 # This option enables the hardware device drivers
9151 # for the current platform.
9153 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9154 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9155 # This value cannot be modified here.
9159 # The following properties are affected by this value
9160 # component CYGPKG_REDBOOT_FLASH
9161 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9164 # Hardware FLASH device drivers are not in RAM
9165 # Use of this interface is deprecated.
9166 # Drivers should make sure that the functions are
9167 # linked to RAM by putting them in .2ram sections.
9169 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9170 # No options implement this inferface
9171 # This value cannot be modified here.
9173 # Current value: 0 0
9174 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9175 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9178 # The following properties are affected by this value
9179 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9180 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9183 # Hardware can support block locking
9184 # This option will be enabled by devices which can support
9185 # locking (write-protection) of individual blocks.
9187 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9188 # No options implement this inferface
9189 # This value cannot be modified here.
9191 # Current value: 0 0
9193 # The following properties are affected by this value
9194 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9195 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9198 # Hardware cannot support direct access to FLASH memory
9199 # This option will be asserted by devices which cannot support
9200 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9201 # devices). In these cases, the driver must provide an appropriate
9202 # hardware access function.
9204 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9206 # No user value, uncomment the following line to provide one.
9208 # The inferred value should not be edited directly.
9210 # value_source inferred
9212 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9213 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9216 # The following properties are affected by this value
9217 # option CYGPRI_REDBOOT_ZLIB_FLASH
9218 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9219 # component CYGHWR_DEVS_FLASH_MMC
9220 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9221 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9222 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9223 # option CYGHWR_DEVS_FLASH_MMC_SD
9224 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9225 # option CYGHWR_DEVS_FLASH_MXC_NAND
9226 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9229 # Display status messages during flash operations
9230 # Selecting this option will cause the drivers to print status
9231 # messages as various flash operations are undertaken.
9233 cdl_option CYGSEM_IO_FLASH_CHATTER {
9235 # No user value, uncomment the following line to provide one.
9237 # value_source default
9241 # Verify data programmed to flash
9242 # Selecting this option will cause verification of data
9243 # programmed to flash.
9245 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9247 # No user value, uncomment the following line to provide one.
9249 # The inferred value should not be edited directly.
9251 # value_source inferred
9254 # The following properties are affected by this value
9255 # option CYGSEM_IO_FLASH_READ_INDIRECT
9256 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9259 # Platform has flash soft DIP switch write-protect
9260 # Selecting this option will cause the state of a hardware jumper or
9261 # dipswitch to be read by software to determine whether the flash is
9262 # write-protected or not.
9264 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9266 # No user value, uncomment the following line to provide one.
9268 # value_source default
9272 # Instantiate in I/O block device API
9273 # Provides a block device accessible using the standard I/O
9274 # API ( cyg_io_read() etc. )
9276 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9277 # This option is not active
9278 # ActiveIf constraint: CYGPKG_IO
9279 # CYGPKG_IO (unknown) == 0
9283 # No user value, uncomment the following line to provide one.
9285 # value_source default
9290 # Name of flash device 1 block device
9292 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9293 # This option is not active
9294 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9295 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9298 # No user value, uncomment the following line to provide one.
9299 # user_value "\"/dev/flash1\""
9300 # value_source default
9301 # Default value: "\"/dev/flash1\""
9306 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9307 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9308 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9309 # This option is not active
9310 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9312 # This value cannot be modified here.
9315 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9316 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9319 # The following properties are affected by this value
9320 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9321 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9324 # Static configuration
9325 # This configures the flash device 1 block device
9326 # with static base and length
9328 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9329 # This option is not active
9330 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9333 # No user value, uncomment the following line to provide one.
9335 # value_source default
9340 # Start offset from flash base
9341 # This gives the offset from the base of flash which this
9342 # block device corresponds to.
9344 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9345 # This option is not active
9346 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9349 # No user value, uncomment the following line to provide one.
9350 # user_value 0x00100000
9351 # value_source default
9352 # Default value: 0x00100000
9356 # This gives the length of the region of flash given over
9357 # to this block device.
9359 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9360 # This option is not active
9361 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9364 # No user value, uncomment the following line to provide one.
9365 # user_value 0x00100000
9366 # value_source default
9367 # Default value: 0x00100000
9371 # Configuration from FIS
9372 # This configures the flash device 1 block device
9375 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9376 # This option is not active
9377 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9380 # No user value, uncomment the following line to provide one.
9382 # value_source default
9389 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9390 # This option is not active
9391 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9392 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9395 # No user value, uncomment the following line to provide one.
9396 # user_value "\"jffs2\""
9397 # value_source default
9398 # Default value: "\"jffs2\""
9404 # Flash device driver build options
9405 # Package specific build options including control over
9406 # compiler flags used only in building this package,
9407 # and details of which tests are built.
9409 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9410 # There is no associated value.
9414 # Additional compiler flags
9415 # This option modifies the set of compiler flags for
9416 # building the flash device drivers. These flags are used in addition
9417 # to the set of global flags.
9419 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9421 # No user value, uncomment the following line to provide one.
9423 # value_source default
9427 # Suppressed compiler flags
9428 # This option modifies the set of compiler flags for
9429 # building the flash device drivers. These flags are removed from
9430 # the set of global flags if present.
9432 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9434 # No user value, uncomment the following line to provide one.
9436 # value_source default
9440 # Flash device driver tests
9441 # This option specifies the set of tests for the flash device drivers.
9443 cdl_component CYGPKG_IO_FLASH_TESTS {
9444 # Calculated value: "tests/flash1"
9446 # Current_value: tests/flash1
9450 # Start offset from flash base
9451 # This gives the offset from the base of flash where tests
9452 # can be run. It is important to set this correctly, as an
9453 # incorrect value could allow the tests to write over critical
9454 # portions of the FLASH device and possibly render the target
9455 # board totally non-functional.
9457 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9459 # No user value, uncomment the following line to provide one.
9460 # user_value 0x00100000
9461 # value_source default
9462 # Default value: 0x00100000
9466 # This gives the length of the region of flash used for testing.
9468 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9470 # No user value, uncomment the following line to provide one.
9471 # user_value 0x00100000
9472 # value_source default
9473 # Default value: 0x00100000
9478 # Support FLASH memory on Freescale MXC platforms
9480 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9481 # Packages cannot be added or removed, nor can their version be changed,
9482 # simply by editing their value. Instead the appropriate configuration
9483 # should be used to perform these actions.
9485 # ActiveIf constraint: CYGPKG_IO_FLASH
9486 # CYGPKG_IO_FLASH == current
9489 # This value cannot be modified here.
9491 # Current value: 1 current
9495 # MXC platform MMC card support
9496 # When this option is enabled, it indicates MMC card is
9497 # supported on the MXC platforms
9499 cdl_component CYGHWR_DEVS_FLASH_MMC {
9501 # No user value, uncomment the following line to provide one.
9503 # value_source default
9505 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9506 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9509 # The following properties are affected by this value
9510 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9511 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9512 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9513 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9514 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9515 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9516 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9517 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9521 # MXC platform MMC card for newer SDHC controllers
9523 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9524 # This option is not active
9525 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9526 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9527 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9528 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9529 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9530 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9531 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9532 # CYGPKG_HAL_ARM_MX53 == current
9536 # No user value, uncomment the following line to provide one.
9538 # value_source default
9540 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9541 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9545 # MXC platform MMC card for older MMC/SD controllers
9547 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9548 # This option is not active
9549 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9550 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9551 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9552 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9556 # No user value, uncomment the following line to provide one.
9558 # value_source default
9560 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9561 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9566 # MXC platform NOR flash memory support
9567 # When this option is enabled, it indicates NOR flash is
9568 # supported on the MXC platforms
9570 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9572 # No user value, uncomment the following line to provide one.
9574 # The inferred value should not be edited directly.
9576 # value_source inferred
9579 # The following properties are affected by this value
9580 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9581 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9582 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9583 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9584 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9585 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9586 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9587 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9588 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9589 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9592 # MXC platform NAND flash memory support
9593 # When this option is enabled, it indicates NAND flash is
9594 # supported on the MXC platforms
9596 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9598 # No user value, uncomment the following line to provide one.
9600 # The inferred value should not be edited directly.
9602 # value_source inferred
9604 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9605 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9608 # The following properties are affected by this value
9609 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9610 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9611 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9612 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9613 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9614 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9615 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9616 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9617 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9618 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9619 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9620 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9623 # i.MX platform SPI NOR flash memory support
9624 # When this option is enabled, it indicates SPI NOR flash is
9625 # supported on the i.MX platforms
9627 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9629 # No user value, uncomment the following line to provide one.
9631 # value_source default
9633 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9634 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9638 # MXC platform ATA support
9639 # When this option is enabled, it indicates ATA is
9640 # supported on the MXC platforms
9642 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9644 # No user value, uncomment the following line to provide one.
9646 # value_source default
9650 # Use a flash based Bad Block Table
9652 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9653 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9654 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9657 # There is no associated value.
9661 # When this option is enabled, the driver will search for a flash
9662 # based bad block table
9664 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9666 # No user value, uncomment the following line to provide one.
9668 # value_source default
9672 # header file defining the NAND BBT descriptor
9673 # defines the name of the header file that describes the BBT layout
9675 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9677 # No user value, uncomment the following line to provide one.
9679 # The inferred value should not be edited directly.
9680 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9681 # value_source inferred
9682 # Default value: 0 0
9685 # Number of blocks to reserve for BBT
9686 # Number of blocks to reserve for BBT
9688 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9690 # No user value, uncomment the following line to provide one.
9692 # value_source default
9697 # MXC platform multi flash memory support
9698 # When this option is enabled, it indicates multi flashes are
9699 # supported on the MXC platforms (like NAND and NOR)
9701 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9702 # This option is not active
9703 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9704 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9705 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9706 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9707 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9708 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9709 # CYGHWR_DEVS_FLASH_MMC == 0
9710 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9711 # CYGHWR_DEVS_FLASH_MMC == 0
9715 # No user value, uncomment the following line to provide one.
9717 # The inferred value should not be edited directly.
9719 # value_source inferred
9723 # MXC platform NAND flash reset workaround support
9724 # When this option is enabled, it indicates 0xFFFF is used for
9725 # the NAND reset command instead of 0xFF.
9727 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9728 # No options implement this inferface
9729 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9730 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9733 # This value cannot be modified here.
9740 # Dynamic memory allocation
9741 # doc: ref/memalloc.html
9742 # This package provides memory allocator infrastructure required for
9743 # dynamic memory allocators, including the ISO standard malloc
9744 # interface. It also contains some sample implementations.
9746 cdl_package CYGPKG_MEMALLOC {
9747 # Packages cannot be added or removed, nor can their version be changed,
9748 # simply by editing their value. Instead the appropriate configuration
9749 # should be used to perform these actions.
9751 # This value cannot be modified here.
9753 # Current value: 1 current
9755 # The following properties are affected by this value
9756 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9757 # Requires: CYGPKG_MEMALLOC
9761 # Memory allocator implementations
9762 # This component contains configuration options related to the
9763 # various memory allocators available.
9765 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9766 # There is no associated value.
9770 # Fixed block allocator
9771 # This component contains configuration options related to the
9772 # fixed block memory allocator.
9774 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9775 # There is no associated value.
9780 # With this option enabled, this allocator will be
9781 # made thread-safe. Additionally allocation functions
9782 # are made available that allow a thread to wait
9783 # until memory is available.
9785 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9786 # This option is not active
9787 # ActiveIf constraint: CYGPKG_KERNEL
9788 # CYGPKG_KERNEL (unknown) == 0
9792 # No user value, uncomment the following line to provide one.
9794 # value_source default
9799 # Simple variable block allocator
9800 # This component contains configuration options related to the
9801 # simple variable block memory allocator. This allocator is not
9802 # very fast, and in particular does not scale well with large
9803 # numbers of allocations. It is however very compact in terms of
9804 # code size and does not have very much overhead per allocation.
9806 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9807 # There is no associated value.
9812 # With this option enabled, this allocator will be
9813 # made thread-safe. Additionally allocation functions
9814 # are added that allow a thread to wait until memory
9815 # are made available that allow a thread to wait
9816 # until memory is available.
9818 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9819 # This option is not active
9820 # ActiveIf constraint: CYGPKG_KERNEL
9821 # CYGPKG_KERNEL (unknown) == 0
9825 # No user value, uncomment the following line to provide one.
9827 # value_source default
9832 # The variable-block memory allocator can perform coalescing
9833 # of memory whenever the application code releases memory back
9834 # to the pool. This coalescing reduces the possibility of
9835 # memory fragmentation problems, but involves extra code and
9838 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9840 # No user value, uncomment the following line to provide one.
9842 # value_source default
9845 # The following properties are affected by this value
9846 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9847 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9852 # This component contains configuration options related to the
9853 # port of Doug Lea's memory allocator, normally known as
9854 # dlmalloc. dlmalloc has a reputation for being both fast
9855 # and space-conserving, as well as resisting fragmentation well.
9856 # It is a common choice for a general purpose allocator and
9857 # has been used in both newlib and Linux glibc.
9859 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9860 # There is no associated value.
9865 # Doug Lea's malloc implementation has substantial amounts
9866 # of internal checking in order to verify the operation
9867 # and consistency of the allocator. However this imposes
9868 # substantial overhead on each operation. Therefore this
9869 # checking may be individually disabled.
9871 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9873 # No user value, uncomment the following line to provide one.
9875 # value_source default
9876 # Default value: 0 != CYGDBG_USE_ASSERTS
9877 # CYGDBG_USE_ASSERTS == 0
9879 # Requires: CYGDBG_USE_ASSERTS
9880 # CYGDBG_USE_ASSERTS == 0
9885 # With this option enabled, this allocator will be
9886 # made thread-safe. Additionally allocation functions
9887 # are made available that allow a thread to wait
9888 # until memory is available.
9890 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9891 # This option is not active
9892 # ActiveIf constraint: CYGPKG_KERNEL
9893 # CYGPKG_KERNEL (unknown) == 0
9897 # No user value, uncomment the following line to provide one.
9899 # value_source default
9901 # Requires: CYGPKG_KERNEL
9902 # CYGPKG_KERNEL (unknown) == 0
9906 # Support more than one instance
9907 # Having this option disabled allows important
9908 # implementation structures to be declared as a single
9909 # static instance, allowing faster access. However this
9910 # would fail if there is more than one instance of
9911 # the dlmalloc allocator class. Therefore this option can
9912 # be enabled if multiple instances are required. Note: as
9913 # a special case, if this allocator is used as the
9914 # implementation of malloc, and it can be determined there
9915 # is more than one malloc pool, then this option will be
9918 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9920 # No user value, uncomment the following line to provide one.
9922 # value_source default
9926 # Use system memmove() and memset()
9927 # This may be used to control whether memset() and memmove()
9928 # are used within the implementation. The alternative is
9929 # to use some macro equivalents, which some people report
9930 # are faster in some circumstances.
9932 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9934 # No user value, uncomment the following line to provide one.
9936 # value_source default
9937 # Default value: 0 != CYGPKG_ISOINFRA
9938 # CYGPKG_ISOINFRA == current
9940 # Requires: CYGPKG_ISOINFRA
9941 # CYGPKG_ISOINFRA == current
9945 # Minimum alignment of allocated blocks
9946 # This option controls the minimum alignment that the
9947 # allocated memory blocks are aligned on, specified as
9948 # 2^N. Note that using large mininum alignments can lead
9949 # to excessive memory wastage.
9951 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9953 # No user value, uncomment the following line to provide one.
9955 # value_source default
9957 # Legal values: 3 to 10
9961 # Variable block allocator with separate metadata
9962 # This component contains configuration options related to the
9963 # variable block memory allocator with separate metadata.
9965 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9966 # There is no associated value.
9971 # With this option enabled, this allocator will be
9972 # made thread-safe. Additionally allocation functions
9973 # are made available that allow a thread to wait
9974 # until memory is available.
9976 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9977 # This option is not active
9978 # ActiveIf constraint: CYGPKG_KERNEL
9979 # CYGPKG_KERNEL (unknown) == 0
9983 # No user value, uncomment the following line to provide one.
9985 # value_source default
9991 # Kernel C API support for memory allocation
9992 # This option must be enabled to provide the extensions required
9993 # to support integration into the kernel C API.
9995 cdl_option CYGFUN_MEMALLOC_KAPI {
9996 # This option is not active
9997 # ActiveIf constraint: CYGPKG_KERNEL
9998 # CYGPKG_KERNEL (unknown) == 0
10002 # No user value, uncomment the following line to provide one.
10004 # value_source default
10005 # Default value: CYGFUN_KERNEL_API_C
10006 # CYGFUN_KERNEL_API_C (unknown) == 0
10010 # malloc(0) returns NULL
10011 # This option controls the behavior of malloc(0) ( or calloc with
10012 # either argument 0 ). It is permitted by the standard to return
10013 # either a NULL pointer or a unique pointer. Enabling this option
10014 # forces a NULL pointer to be returned.
10016 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
10018 # No user value, uncomment the following line to provide one.
10020 # value_source default
10024 # Breakpoint site when running out of memory
10025 # Whenever the system runs out of memory, it invokes this function
10026 # before either going to sleep waiting for memory to become
10027 # available or returning failure.
10029 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
10031 # No user value, uncomment the following line to provide one.
10033 # value_source default
10037 # malloc() and supporting allocators
10038 # This component enables support for dynamic memory
10039 # allocation as supplied by the functions malloc(),
10040 # free(), calloc() and realloc(). As these
10041 # functions are often used, but can have quite an
10042 # overhead, disabling them here can ensure they
10043 # cannot even be used accidentally when static
10044 # allocation is preferred. Within this component are
10045 # various allocators that can be selected for use
10046 # as the underlying implementation of the dynamic
10047 # allocation functions.
10049 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10050 # ActiveIf constraint: CYGPKG_ISOINFRA
10051 # CYGPKG_ISOINFRA == current
10055 # No user value, uncomment the following line to provide one.
10057 # value_source default
10062 # Use external heap definition
10063 # This option allows other components in the
10064 # system to override the default system
10065 # provision of heap memory pools. This should
10066 # be set to a header which provides the equivalent
10067 # definitions to <pkgconf/heaps.hxx>.
10069 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10071 # No user value, uncomment the following line to provide one.
10073 # value_source default
10074 # Default value: 0 0
10077 # Use external implementation of joining multiple heaps
10078 # The default implementation of joining multiple heaps
10079 # is fine for the case where there are multiple disjoint
10080 # memory regions of the same type. However, in a system
10081 # there might be e.g. a small amount of internal SRAM and
10082 # a large amount of external DRAM. The SRAM is faster and
10083 # the DRAM is slower. An application can implement some
10084 # heuristic to choose which pool to allocate from. This
10085 # heuristic can be highly application specific.
10087 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10089 # No user value, uncomment the following line to provide one.
10091 # value_source default
10092 # Default value: 0 0
10095 # malloc() allocator implementations
10097 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10098 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10099 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10100 # This value cannot be modified here.
10103 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10104 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10107 # The following properties are affected by this value
10108 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10109 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10112 # malloc() implementation instantiation data
10113 # Memory allocator implementations that are capable of being
10114 # used underneath malloc() must be instantiated. The code
10115 # to do this is set in this option. It is only intended to
10116 # be set by the implementation, not the user.
10118 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10120 # No user value, uncomment the following line to provide one.
10121 # user_value <cyg/memalloc/dlmalloc.hxx>
10122 # value_source default
10123 # Default value: <cyg/memalloc/dlmalloc.hxx>
10125 # The following properties are affected by this value
10126 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10127 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10128 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10129 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10132 # Simple variable block implementation
10133 # This causes malloc() to use the simple
10134 # variable block allocator.
10136 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10138 # No user value, uncomment the following line to provide one.
10140 # value_source default
10142 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10143 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10145 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10146 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10150 # Doug Lea's malloc implementation
10151 # This causes malloc() to use a version of Doug Lea's
10152 # malloc (dlmalloc) as the underlying implementation.
10154 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10156 # No user value, uncomment the following line to provide one.
10158 # value_source default
10160 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10161 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10166 # Size of the fallback dynamic memory pool in bytes
10167 # If *no* heaps are configured in your memory layout,
10168 # dynamic memory allocation by
10169 # malloc() and calloc() must be from a fixed-size,
10170 # contiguous memory pool (note here that it is the
10171 # pool that is of a fixed size, but malloc() is still
10172 # able to allocate variable sized chunks of memory
10173 # from it). This option is the size
10174 # of that pool, in bytes. Note that not all of
10175 # this is available for programs to
10176 # use - some is needed for internal information
10177 # about memory regions, and some may be lost to
10178 # ensure that memory allocation only returns
10179 # memory aligned on word (or double word)
10180 # boundaries - a very common architecture
10183 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10185 # No user value, uncomment the following line to provide one.
10187 # value_source default
10188 # Default value: 16384
10189 # Legal values: 32 to 0x7fffffff
10192 # Common memory allocator package build options
10193 # Package specific build options including control over
10194 # compiler flags used only in building this package,
10195 # and details of which tests are built.
10197 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10198 # There is no associated value.
10202 # Additional compiler flags
10203 # This option modifies the set of compiler flags for
10204 # building this package. These flags are used in addition
10205 # to the set of global flags.
10207 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10209 # No user value, uncomment the following line to provide one.
10210 # user_value "-fno-rtti -Woverloaded-virtual"
10211 # value_source default
10212 # Default value: "-fno-rtti -Woverloaded-virtual"
10215 # Suppressed compiler flags
10216 # This option modifies the set of compiler flags for
10217 # building this package. These flags are removed from
10218 # the set of global flags if present.
10220 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10222 # No user value, uncomment the following line to provide one.
10223 # user_value -Wno-pointer-sign
10224 # value_source default
10225 # Default value: -Wno-pointer-sign
10229 # This option specifies the set of tests for this package.
10231 cdl_option CYGPKG_MEMALLOC_TESTS {
10232 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10234 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10239 # Common error code support
10240 # This package contains the common list of error and
10241 # status codes. It is held centrally to allow
10242 # packages to interchange error codes and status
10243 # codes in a common way, rather than each package
10244 # having its own conventions for error/status
10245 # reporting. The error codes are modelled on the
10246 # POSIX style naming e.g. EINVAL etc. This package
10247 # also provides the standard strerror() function to
10248 # convert error codes to textual representation, as
10249 # well as an implementation of the errno idiom.
10251 cdl_package CYGPKG_ERROR {
10252 # Packages cannot be added or removed, nor can their version be changed,
10253 # simply by editing their value. Instead the appropriate configuration
10254 # should be used to perform these actions.
10256 # This value cannot be modified here.
10258 # Current value: 1 current
10259 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10260 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10266 # This package controls the behaviour of the
10267 # errno variable (or more strictly, expression)
10270 cdl_component CYGPKG_ERROR_ERRNO {
10272 # No user value, uncomment the following line to provide one.
10274 # value_source default
10276 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10277 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10283 # This option controls whether the standard error
10284 # code reporting variable errno is a per-thread
10285 # variable, rather than global.
10287 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10289 # No user value, uncomment the following line to provide one.
10291 # The inferred value should not be edited directly.
10293 # value_source inferred
10295 # Requires: CYGVAR_KERNEL_THREADS_DATA
10296 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10301 # Trace verbosity level for debugging the errno
10302 # retrieval mechanism in errno.cxx. Increase this
10303 # value to get additional trace output.
10305 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10307 # No user value, uncomment the following line to provide one.
10309 # value_source default
10311 # Legal values: 0 to 1
10315 # strerror function
10316 # This package controls the presence and behaviour of the
10317 # strerror() function from <string.h>
10319 cdl_option CYGPKG_ERROR_STRERROR {
10321 # No user value, uncomment the following line to provide one.
10323 # value_source default
10325 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10326 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10330 # Error package build options
10331 # Package specific build options including control over
10332 # compiler flags used only in building this package,
10333 # and details of which tests are built.
10335 cdl_component CYGPKG_ERROR_OPTIONS {
10336 # There is no associated value.
10340 # Additional compiler flags
10341 # This option modifies the set of compiler flags for
10342 # building the error package. These flags are used in addition
10343 # to the set of global flags.
10345 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10347 # No user value, uncomment the following line to provide one.
10349 # value_source default
10350 # Default value: ""
10353 # Suppressed compiler flags
10354 # This option modifies the set of compiler flags for
10355 # building the error package. These flags are removed from
10356 # the set of global flags if present.
10358 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10360 # No user value, uncomment the following line to provide one.
10362 # value_source default
10363 # Default value: ""
10368 # I2C driver for FSL MXC-based platforms
10370 cdl_package CYGPKG_DEVS_MXC_I2C {
10371 # Packages cannot be added or removed, nor can their version be changed,
10372 # simply by editing their value. Instead the appropriate configuration
10373 # should be used to perform these actions.
10375 # This value cannot be modified here.
10377 # Current value: 1 current
10380 # ipu driver for mxc
10382 cdl_package CYGPKG_DEVS_IMX_IPU {
10383 # Packages cannot be added or removed, nor can their version be changed,
10384 # simply by editing their value. Instead the appropriate configuration
10385 # should be used to perform these actions.
10387 # This value cannot be modified here.
10389 # Current value: 1 current
10391 # The following properties are affected by this value
10392 # option CYGHWR_MX53_LCD_LOGO
10393 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10397 # IPU version 3EX support
10398 # When this option is enabled, it indicates the IPU version
10401 cdl_option CYGHWR_DEVS_IPU_3_EX {
10403 # No user value, uncomment the following line to provide one.
10405 # The inferred value should not be edited directly.
10407 # value_source inferred
10411 # IPU version 3D support
10412 # When this option is enabled, it indicates the IPU version
10415 cdl_option CYGHWR_DEVS_IPU_3_D {
10417 # No user value, uncomment the following line to provide one.
10419 # value_source default