cpu/blackfin/cpu.c

   1 /*
   2  * U-boot - cpu.c CPU specific functions
   3  *
   4  * Copyright (c) 2005-2008 Analog Devices Inc.
   5  *
   6  * (C) Copyright 2000-2004
   7  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   8  *
   9  * Licensed under the GPL-2 or later.
  10  */
  11
  12 #include <common.h>
  13 #include <command.h>
  14 #include <asm/blackfin.h>
  15 #include <asm/cplb.h>
  16 #include <asm/mach-common/bits/core.h>
  17 #include <asm/mach-common/bits/ebiu.h>
  18 #include <asm/mach-common/bits/trace.h>
  19
  20 #include "cpu.h"
  21 #include "serial.h"
  22
  23 ulong bfin_poweron_retx;
  24
  25 __attribute__ ((__noreturn__))
  26 void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
  27 {
  28         if (!loaded_from_ldr) {
  29                 /* Relocate sections into L1 if the LDR didn't do it -- don't
  30                  * check length because the linker script does the size
  31                  * checking at build time.
  32                  */
  33                 extern char _stext_l1;
  34                 serial_early_puts("L1 Relocate\n");
  35                 extern char _stext_l1, _etext_l1, _stext_l1_lma;
  36                 memcpy(&_stext_l1, &_stext_l1_lma, (&_etext_l1 - &_stext_l1));
  37                 extern char _sdata_l1, _edata_l1, _sdata_l1_lma;
  38                 memcpy(&_sdata_l1, &_sdata_l1_lma, (&_edata_l1 - &_sdata_l1));
  39         }
  40 #if defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__)
  41         /* The BF537 bootrom will reset the EBIU_AMGCTL register on us
  42          * after it has finished loading the LDR.  So configure it again.
  43          */
  44         else
  45                 bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL);
  46 #endif
  47
  48         /* Save RETX so we can pass it while booting Linux */
  49         bfin_poweron_retx = bootflag;
  50
  51 #ifdef CONFIG_DEBUG_DUMP
  52         /* Turn on hardware trace buffer */
  53         bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
  54 #endif
  55
  56 #ifndef CONFIG_PANIC_HANG
  57         /* Reset upon a double exception rather than just hanging.
  58          * Do not do bfin_read on SWRST as that will reset status bits.
  59          */
  60         bfin_write_SWRST(DOUBLE_FAULT);
  61 #endif
  62
  63         serial_early_puts("Board init flash\n");
  64         board_init_f(bootflag);
  65 }
  66
  67 int exception_init(void)
  68 {
  69         bfin_write_EVT3(trap);
  70         return 0;
  71 }
  72
  73 int irq_init(void)
  74 {
  75 #ifdef SIC_IMASK0
  76         bfin_write_SIC_IMASK0(0);
  77         bfin_write_SIC_IMASK1(0);
  78 # ifdef SIC_IMASK2
  79         bfin_write_SIC_IMASK2(0);
  80 # endif
  81 #elif defined(SICA_IMASK0)
  82         bfin_write_SICA_IMASK0(0);
  83         bfin_write_SICA_IMASK1(0);
  84 #else
  85         bfin_write_SIC_IMASK(0);
  86 #endif
  87         bfin_write_EVT2(evt_default);   /* NMI */
  88         bfin_write_EVT5(evt_default);   /* hardware error */
  89         bfin_write_EVT6(evt_default);   /* core timer */
  90         bfin_write_EVT7(evt_default);
  91         bfin_write_EVT8(evt_default);
  92         bfin_write_EVT9(evt_default);
  93         bfin_write_EVT10(evt_default);
  94         bfin_write_EVT11(evt_default);
  95         bfin_write_EVT12(evt_default);
  96         bfin_write_EVT13(evt_default);
  97         bfin_write_EVT14(evt_default);
  98         bfin_write_EVT15(evt_default);
  99         bfin_write_ILAT(0);
 100         CSYNC();
 101         /* enable hardware error irq */
 102         irq_flags = 0x3f;
 103         local_irq_enable();
 104         return 0;
 105 }