2 # SATA/PATA driver configuration
6 tristate "Serial ATA and Parallel ATA drivers"
9 depends on !(M32R || M68K) || BROKEN
12 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
13 any other ATA device under Linux, say Y and make sure that you know
14 the name of your ATA host adapter (the card inside your computer
15 that "speaks" the ATA protocol, also called ATA controller),
16 because you will be asked for it.
18 NOTE: ATA enables basic SCSI support; *however*,
19 'SCSI disk support', 'SCSI tape support', or
20 'SCSI CDROM support' may also be needed,
21 depending on your hardware configuration.
25 config ATA_NONSTANDARD
29 config ATA_VERBOSE_ERROR
30 bool "Verbose ATA error reporting"
33 This option adds parsing of ATA command descriptions and error bits
34 in libata kernel output, making it easier to interpret.
35 This option will enlarge the kernel by approx. 6KB. Disable it only
36 if kernel size is more important than ease of debugging.
41 bool "ATA ACPI Support"
42 depends on ACPI && PCI
45 This option adds support for ATA-related ACPI objects.
46 These ACPI objects add the ability to retrieve taskfiles
47 from the ACPI BIOS and write them to the disk controller.
48 These objects may be related to performance, security,
49 power management, or other areas.
50 You can disable this at kernel boot time by using the
51 option libata.noacpi=1
54 bool "SATA Port Multiplier support"
57 This option adds support for SATA Port Multipliers
58 (the SATA version of an ethernet hub, or SAS expander).
61 tristate "AHCI SATA support"
64 This option enables support for AHCI Serial ATA.
69 tristate "Silicon Image 3124/3132 SATA support"
72 This option enables support for Silicon Image 3124/3132 Serial ATA.
77 tristate "Freescale 3.0Gbps SATA support"
80 This option enables support for Freescale 3.0Gbps SATA controller.
81 It can be found on MPC837x and MPC8315.
86 bool "ATA SFF support"
89 This option adds support for ATA controllers with SFF
90 compliant or similar programming interface.
92 SFF is the legacy IDE interface that has been around since
93 the dawn of time. Almost all PATA controllers have an
94 SFF interface. Many SATA controllers have an SFF interface
95 when configured into a legacy compatibility mode.
97 For users with exclusively modern controllers like AHCI,
98 Silicon Image 3124, or Marvell 6440, you may choose to
99 disable this unneeded SFF support.
106 tristate "ServerWorks Frodo / Apple K2 SATA support"
109 This option enables support for Broadcom/Serverworks/Apple K2
115 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
118 This option enables support for ICH5/6/7/8 Serial ATA
119 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
125 tristate "Marvell SATA support"
127 This option enables support for the Marvell Serial ATA family.
128 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
129 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
134 tristate "NVIDIA SATA support"
137 This option enables support for NVIDIA Serial ATA.
142 tristate "Pacific Digital ADMA support"
145 This option enables support for Pacific Digital ADMA controllers
150 tristate "Pacific Digital SATA QStor support"
153 This option enables support for Pacific Digital Serial ATA QStor.
158 tristate "Promise SATA TX2/TX4 support"
161 This option enables support for Promise Serial ATA TX2/TX4.
166 tristate "Promise SATA SX4 support (Experimental)"
167 depends on PCI && EXPERIMENTAL
169 This option enables support for Promise Serial ATA SX4.
174 tristate "Silicon Image SATA support"
177 This option enables support for Silicon Image Serial ATA.
182 tristate "SiS 964/965/966/180 SATA support"
186 This option enables support for SiS Serial ATA on
187 SiS 964/965/966/180 and Parallel ATA on SiS 180.
188 The PATA support for SiS 180 requires additionally to
189 enable the PATA_SIS driver in the config.
193 tristate "ULi Electronics SATA support"
196 This option enables support for ULi Electronics SATA.
201 tristate "VIA SATA support"
204 This option enables support for VIA Serial ATA.
209 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
212 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
217 tristate "Initio 162x SATA support"
220 This option enables support for Initio 162x Serial ATA.
223 tristate "ACPI firmware driver for PATA"
226 This option enables an ACPI method driver which drives
227 motherboard PATA controller interfaces through the ACPI
228 firmware in the BIOS. This driver can sometimes handle
229 otherwise unsupported hardware.
232 tristate "ALi PATA support"
235 This option enables support for the ALi ATA interfaces
236 found on the many ALi chipsets.
241 tristate "AMD/NVidia PATA support"
244 This option enables support for the AMD and NVidia PATA
245 interfaces found on the chipsets for Athlon/Athlon64.
250 tristate "ARTOP 6210/6260 PATA support"
253 This option enables support for ARTOP PATA controllers.
258 tristate "ARTOP/Acard ATP867X PATA support"
261 This option enables support for ARTOP/Acard ATP867X PATA
267 tristate "Atmel AVR32 PATA support (Experimental)"
268 depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
270 This option enables support for the IDE devices on the
271 Atmel AT32AP platform.
276 tristate "ATI PATA support"
279 This option enables support for the ATI ATA interfaces
280 found on the many ATI chipsets.
284 config PATA_CMD640_PCI
285 tristate "CMD640 PCI PATA support (Experimental)"
286 depends on PCI && EXPERIMENTAL
288 This option enables support for the CMD640 PCI IDE
289 interface chip. Only the primary channel is currently
295 tristate "CMD64x PATA support"
298 This option enables support for the CMD64x series chips
299 except for the CMD640.
304 tristate "CS5510/5520 PATA support"
307 This option enables support for the Cyrix 5510/5520
308 companion chip used with the MediaGX/Geode processor family.
313 tristate "CS5530 PATA support"
316 This option enables support for the Cyrix/NatSemi/AMD CS5530
317 companion chip used with the MediaGX/Geode processor family.
322 tristate "CS5535 PATA support (Experimental)"
323 depends on PCI && X86 && !X86_64 && EXPERIMENTAL
325 This option enables support for the NatSemi/AMD CS5535
326 companion chip used with the Geode processor family.
331 tristate "CS5536 PATA support"
332 depends on PCI && X86 && !X86_64
334 This option enables support for the AMD CS5536
335 companion chip used with the Geode LX processor family.
340 tristate "Cypress CY82C693 PATA support (Very Experimental)"
341 depends on PCI && EXPERIMENTAL
343 This option enables support for the Cypress/Contaq CY82C693
344 chipset found in some Alpha systems
349 tristate "EFAR SLC90E66 support"
352 This option enables support for the EFAR SLC90E66
353 IDE controller found on some older machines.
358 tristate "Generic ATA support"
361 This option enables support for generic BIOS configured
362 ATA controllers via the new ATA layer
367 tristate "HPT 366/368 PATA support"
370 This option enables support for the HPT 366 and 368
371 PATA controllers via the new ATA layer.
376 tristate "HPT 370/370A/371/372/374/302 PATA support"
379 This option enables support for the majority of the later HPT
380 PATA controllers via the new ATA layer.
385 tristate "HPT 372N/302N PATA support"
388 This option enables support for the N variant HPT PATA
389 controllers via the new ATA layer
394 tristate "HPT 343/363 PATA support"
397 This option enables support for the HPT 343/363
398 PATA controllers via the new ATA layer
402 config PATA_HPT3X3_DMA
403 bool "HPT 343/363 DMA support"
404 depends on PATA_HPT3X3
406 This option enables DMA support for the HPT343/363
407 controllers. Enable with care as there are still some
408 problems with DMA on this chipset.
411 tristate "ISA Plug and Play PATA support"
414 This option enables support for ISA plug & play ATA
415 controllers such as those found on old soundcards.
420 tristate "IT8211/2 PATA support"
423 This option enables support for the ITE 8211 and 8212
424 PATA controllers via the new ATA layer, including RAID
430 tristate "IT8213 PATA support (Experimental)"
431 depends on PCI && EXPERIMENTAL
433 This option enables support for the ITE 821 PATA
434 controllers via the new ATA layer.
439 tristate "JMicron PATA support"
442 Enable support for the JMicron IDE controller, via the new
448 tristate "Legacy ISA PATA support (Experimental)"
449 depends on (ISA || PCI) && EXPERIMENTAL
451 This option enables support for ISA/VLB/PCI bus legacy PATA
452 ports and allows them to be accessed via the new ATA layer.
457 tristate "Compaq Triflex PATA support"
460 Enable support for the Compaq 'Triflex' IDE controller as found
461 on many Compaq Pentium-Pro systems, via the new ATA layer.
466 tristate "Marvell PATA support via legacy mode"
469 This option enables limited support for the Marvell 88SE61xx ATA
470 controllers. If you wish to use only the SATA ports then select
471 the AHCI driver alone. If you wish to the use the PATA port or
472 both SATA and PATA include this driver.
477 tristate "Freescale MPC52xx SoC internal IDE"
478 depends on PPC_MPC52xx && PPC_BESTCOMM
479 select PPC_BESTCOMM_ATA
481 This option enables support for integrated IDE controller
482 of the Freescale MPC52xx SoC.
487 tristate "Intel PATA MPIIX support"
490 This option enables support for MPIIX PATA support.
495 tristate "Intel PATA old PIIX support"
498 This option enables support for early PIIX PATA support.
503 tristate "NETCELL Revolution RAID support"
506 This option enables support for the Netcell Revolution RAID
512 tristate "Ninja32/Delkin Cardbus ATA support"
515 This option enables support for the Ninja32, Delkin and
516 possibly other brands of Cardbus ATA adapter
521 tristate "Nat Semi NS87410 PATA support"
524 This option enables support for the National Semiconductor
525 NS87410 PCI-IDE controller.
530 tristate "Nat Semi NS87415 PATA support"
533 This option enables support for the National Semiconductor
534 NS87415 PCI-IDE controller.
539 tristate "OPTI621/6215 PATA support (Very Experimental)"
540 depends on PCI && EXPERIMENTAL
542 This option enables full PIO support for the early Opti ATA
543 controllers found on some old motherboards.
548 tristate "OPTI FireStar PATA support (Very Experimental)"
549 depends on PCI && EXPERIMENTAL
551 This option enables DMA/PIO support for the later OPTi
552 controllers found on some old motherboards and in some
558 tristate "Palm LifeDrive PATA support"
559 depends on MACH_PALMLD
561 This option enables support for Palm LifeDrive's internal ATA
562 port via the new ATA layer.
567 tristate "PCMCIA PATA support"
570 This option enables support for PCMCIA ATA interfaces, including
571 compact flash card adapters via the new ATA layer.
576 tristate "Promise PATA 2027x support"
579 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
584 tristate "Older Promise PATA controller support"
587 This option enables support for the Promise 20246, 20262, 20263,
588 20265 and 20267 adapters.
593 tristate "QDI VLB PATA support"
596 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
599 tristate "RADISYS 82600 PATA support (Experimental)"
600 depends on PCI && EXPERIMENTAL
602 This option enables support for the RADISYS 82600
603 PATA controllers via the new ATA layer
608 tristate "RouterBoard 532 PATA CompactFlash support"
609 depends on MIKROTIK_RB532
611 This option enables support for the RouterBoard 532
612 PATA CompactFlash controller.
617 tristate "RDC PATA support"
620 This option enables basic support for the later RDC PATA controllers
621 controllers via the new ATA layer. For the RDC 1010, you need to
622 enable the IT821X driver instead.
627 tristate "PC Tech RZ1000 PATA support"
630 This option enables basic support for the PC Tech RZ1000/1
631 PATA controllers via the new ATA layer
636 tristate "SC1200 PATA support"
639 This option enables support for the NatSemi/AMD SC1200 SoC
640 companion chip used with the Geode processor family.
644 config PATA_SERVERWORKS
645 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
648 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
649 HT1000 PATA controllers, via the new ATA layer.
654 tristate "CMD / Silicon Image 680 PATA support"
657 This option enables support for CMD / Silicon Image 680 PATA.
662 tristate "SiS PATA support"
665 This option enables support for SiS PATA controllers
670 tristate "Toshiba Piccolo support (Experimental)"
671 depends on PCI && EXPERIMENTAL
673 Support for the Toshiba Piccolo controllers. Currently only the
674 primary channel is supported by this driver.
679 tristate "VIA PATA support"
682 This option enables support for the VIA PATA interfaces
683 found on the many VIA chipsets.
688 tristate "Winbond SL82C105 PATA support"
691 This option enables support for SL82C105 PATA devices found in the
692 Netwinder and some other systems
696 config PATA_WINBOND_VLB
697 tristate "Winbond W83759A VLB PATA support (Experimental)"
698 depends on ISA && EXPERIMENTAL
700 Support for the Winbond W83759A controller on Vesa Local Bus
703 config HAVE_PATA_PLATFORM
706 This is an internal configuration node for any machine that
707 uses pata-platform driver to enable the relevant driver in the
708 configuration structure without having to submit endless patches
709 to update the PATA_PLATFORM entry.
712 tristate "Generic platform device PATA support"
713 depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
715 This option enables support for generic directly connected ATA
716 devices commonly found on embedded systems.
721 tristate "PATA support for AT91SAM9260"
722 depends on ARM && ARCH_AT91
724 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
728 config PATA_OF_PLATFORM
729 tristate "OpenFirmware platform device PATA support"
730 depends on PATA_PLATFORM && PPC_OF
732 This option enables support for generic directly connected ATA
733 devices commonly found on embedded systems with OpenFirmware
739 tristate "Acorn ICS PATA support"
740 depends on ARM && ARCH_ACORN
742 On Acorn systems, say Y here if you wish to use the ICS PATA
743 interface card. This is not required for ICS partition support.
744 If you are unsure, say N to this.
746 config PATA_IXP4XX_CF
747 tristate "IXP4XX Compact Flash support"
748 depends on ARCH_IXP4XX
750 This option enables support for a Compact Flash connected on
751 the ixp4xx expansion bus. This driver had been written for
752 Loft/Avila boards in mind but can work with others.
756 config PATA_OCTEON_CF
757 tristate "OCTEON Boot Bus Compact Flash support"
758 depends on CPU_CAVIUM_OCTEON
760 This option enables a polled compact flash driver for use with
761 compact flash cards attached to the OCTEON boot bus.
766 tristate "Toshiba's Cell Reference Set IDE support"
767 depends on PCI && PPC_CELLEB
769 This option enables support for the built-in IDE controller on
770 Toshiba Cell Reference Board.
775 tristate "Intel SCH PATA support"
778 This option enables support for Intel SCH PATA on the Intel
779 SCH (US15W, US15L, UL11L) series host controllers.
784 tristate "Blackfin 54x ATAPI support"
785 depends on BF542 || BF548 || BF549
787 This option enables support for the built-in ATAPI controller on
788 Blackfin 54x family chips.
793 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
796 Most IDE capable PowerMacs have IDE busses driven by a variant
797 of this controller which is part of the Apple chipset used on
798 most PowerMac models. Some models have multiple busses using
799 different chipsets, though generally, MacIO is one of them.